Ventlock - ASSA ABLOY New Zealand

Ventlock
WL01 Au BOM WL01
WL01Au
Au BOM
BOM
WL01 Au BOM
WL01 Au BOM
WL01 Au BOM WL01
WL01Au
Au BOM
BOM
The deadlocking sliding window lock
WL01 Au BOM
WL01 Au BOM
WL01 AuWL01
BOMAu WL01
BOM Au BOM
WL01 Au BOM
WL01 Au BOM WL01 Au BOM
Ventlock MC70: For use with sliding aluminium windows.
Operation: Push button to lock and key to unlock.
Application: Provides safe venting or secure deadlocking for most types of sliding aluminium windows.
Components
Side Packer / Drilling Jig
1.5mm Packer
Side Fixing Screws
Face Fix Drilling Jig
Side Fixing One Way
Security Screws
Fixing Instructions
1
Lock Body
WL01 Au BOM
WL01 Au BOM
Face Fixing Screws
2.5mm Packer
Face Fixing One Way
Security Screws
5mm Packer
Keys
Screw Plugs
WL01 NZ BOM
WL01 NZ BOM
WL01 NZ BOM
WL01 NZ BOM WL01
WL01 NZ
NZ BOM
BOM
WL01 NZ BOM WL01
WL01 NZ
NZ BOM
BOM
Face
fix
WL01 NZ BOM
Side fix
WL01 NZ BOM
WL01 NZ BOM
WL01 Au BOM
WL01 NZ BOM
WL01 NZ BOM
WL01 Au BOM
WL01 NZ BOM WL01 NZ BOM
WL01 Au BOM
Sliding Windows
1.FitDecide
on WL01
fixing
Au BOM method
lock
at centre
of window
'Front
mounted' fixes to the face
Faceoffixthe sliding sash.
FaceThis
fix method
Sidesuits
fix
most
windows.
'Side
mounted'
fixes
through
window
section
into
body
Sliding Windows
of lock when the window section doesn't suit front mounting.
1. Decide on fixing method
1. Decide on fixing method
'Front
mounted'
fixes to'Front
the face
mounted'
ofSide
the
sliding
fixes tosash.
the face
Thisofmethod
the sl
Face fix
fix Fix
Face
Face
fix Fix
Side fix Side
most windows. 'Side mounted'
most windows.
fixes through
'Side mounted'
window section
fixes throu
into
of lock Decide
when
the
lock when
doesn't
the window
suit frontsection
mounting.
doesn't s
fixingwindow
method ofsection
1. Decide 1.on
fixing on
method
Sliding Windows
Mountin
Face
g Mountin g
Sliding Windows
Sliding Windows
'Front mounted'
fixes
toof
the
face
of the
sliding
sash.
Thissuits
method suits
'Front mounted'
fixes to the
face
the
sliding
sash.
This
method
Determine fixing location
most windows.
'Side mounted'
fixeswindow
throughsection
windowinto
section
most windows.
'Side mounted'
fixes through
body into body
Mountin
of lock when
thesection
windowdoesn't
sectionsuit
doesn't
suit
front mounting.
Face Face
Mountin
g g
Extra
- for extra clearance
of lock when
frontClearance
mounting.
Face Fix: In most cases this lock can be screwed on through
the facethe
of window
the lock.
Side Fix: Some window designs will only allow fixing into the side of the lock.
Face Fixing
and strength it may be necessary to
use the packer.
WL01 NZ BOM
WL01 NZ BOM
WL01 NZ BOM
Note: For side fixing
please see over page
WL01 NZ BOM
2
3
WL01 NZ BOM
4
WL01 NZ BOM
3. Fix jig
drilling jig
4. Drill
3. Fix drilling
4. Drill bolt
holesbolt holes
top hole
fix jigusing
to sash using With window
Withfirmly
window
firmlydrill
closed,
Drill 4mmDrill
top 4mm
hole and
fix jigand
to sash
closed,
7mm drill
bolt7mm
hole bolt hole
thread
cuttingAlign
screw.
Alignedge
jig with
throughin
upstand
windowEnsure
frame.hole
Ensure hole
thread cutting
screw.
jig with
of edge of through upstand
windowinframe.
and
bottom
fixing hole.
at least
6mm
deep to accommodate
sash and sash
repeat
forrepeat
bottomforfixing
hole.
is at leastis6mm
deep
to accommodate
locking locking
NOTE:
Do not overtighten
screws.
bolt (this
maydrilling
require
drillinginto
slightly
NOTE: Do
not overtighten
screws. Be
carefulBe careful
bolt (this may
require
slightly
sash into sash
not
to stripinthreads
in aluminium.
some windows).
If a
secureposition
venting position
not to strip
threads
aluminium.
on some on
windows).
If a secure
venting
through
bolt
hole
Fix drilling jig
is required,
drill
abolt
second
bolt hole
is required,
drill Drill
a second
hole with
no with no
thanwindow
100mmopening.
window opening.
more thanmore
100mm
drilling jig
2. Position2. Position
drilling jig
On the
inside
face
the rear vertical
On the inside
face
of the
rearofvertical
frame
of the
slidingsash,
window sash,
frame of the
sliding
window
screws
not inside
hit glass inside
ensuring ensuring
screws will
not hitwill
glass
sash.
Notch
should
rest on frame
sash. Notch
should
rest
on frame
upstand
(Useifpackers
if required).
upstand (Use
packers
required).
Mark fixing screw locations
drilling jig
0512
With window firmly closed, drill 7mm bolt
Drill 4mm top hole and fix jig to sash
Position face fix drilling jig as shown,
hole through upstand in frame. Ensure
using 20mm face fixing screw. Align jig
ensure notch rests on upstand.
hole is 6mm deep to accommodate
with edge of sash and repeat for bottom
3. Fix drilling jig fixing hole.
3. Fix drilling jig
4. Drill
holes
4. Drill bolt hol
2. Position(Usedrilling
packers ifjig
required)
locking
boltbolt
(this may
require drilling
Drillvertical
4mm
andDofix
Drill
jigovertighten
4mm
to sash
top screws.
using
hole and fix jig slightly
to
sash
using
With
window
closed,
Withdrill
window
7mm fir
bo
e
On
rear
thevertical
inside
of theof rear
Checkface
clearance
screws
with top hole
into
sash). Iffirmly
a secure
venting
Note:
not
glass
line. windowthread
is required,
a second
boltframe.
thread
jig cutting
with edge
screw.
of Align jigposition
with edge
of drillin
through
upstand
window
through
upstand
Ens
dow
rame
sash,
of the
sliding
sash, cutting screw. Align
hole with no more than 100mm opening.
Q25102
drilling jig
4. Drill bolt holes
4mm top hole and fix jig to sash using
With window firmly closed, drill 7mm bolt hole
sash
and
repeatoffor bottom
sashfixing
and
repeat
hole. upstand
for bottom in
fixing
is
athole.
least frame.
6mm deep
toisaccommodate
at least
ensuring
glassscrews
inside
willAlign
not hitjig
glass
inside
dhitcutting
screw.
with
edge
through
window
Ensure
hole6mm
Do not overtighten
NOTE:
screws.
Doatnot
Be
overtighten
careful
screws.
Be may
careful
boltto(this
require drilling
bolt
(this
slightly
mayint
re
sash.
tand
on frame
Notch should
rest onNOTE:
frame hole.
repeat
for bottom
fixing
is
least
6mm deep
accommodate
locking
not to stripBe
threads
in aluminium.
not to strip
in aluminium.
on drilling
some windows).
aon
secure
someventing
windo
upstand
required).
(Use
packers if required).
E:
Do not
overtighten
screws.
careful
boltthreads
(this may
require
slightly Ifinto
sash
is required, drill a second
is required,
bolt hole with
drill
An ASSA ABLOY Group brand
o strip threads
in aluminium.
on some windows).more
If a than
secure
venting
position
100mm
window
more
opening.
than 100m
NOTE: Do not overtighten screws. Be careful
not to strip threads in aluminium.
Notch should rest on frame
nd (Use packers if required).
bolt (this may require drilling slightly into sa
on some windows). If a secure venting pos
is required, drill a second bolt hole with no
more than 100mm window opening.
Ventlock
Sid
The deadlocking sliding window lock
5
6
Side Mounting
ounting
Fit lock body and test
Side Fixing
2. Position side mount drilling jig
On the rear 2
vertical frame of the sliding window
and mark fixing and bolt hole positions. Bolt ho
should be bent at 90 degrees to sit flat against
upstand. Ensure window is firmly closed before
marking bolt hole position and that notch in dril
jig rests on frame upstand.
Fit screw cover and side hole plugs
Remove drilling jig from sash. Remove
screw cover from lock and fit lock in
placetest
using face fixing screws (use
ock body and
packers
if required).
Check
operation
e drillingand
jig
from
sash.
Remove
screw
body
test
of
lock
in closed
and(using
ventedsame
positions
rom lock and fit lock
in place
illing
jig
from
sash.
Remove
screw
if
satisfactory,
replace
screws
with
s, if required) using thread cutting screws.
one
way
for security.
lock
andof
fit
lock
in place
(using
same
operation
lock
inscrews
both
closed
and
vented
Note: One
way screws
cannot
be
ns
- if satisfactory,
standard
screws
required)
usingreplace
thread
cutting
screws.
removed
once
tightened.
e way screws
for greater
security. Note:
Fit screw cover and side hole plugs to
Position side fix drilling jig
3. M
lock body. Ensure sliding window track 2. Position side mount drilling jig
On the rear Fitted
vertical and
framefully
of the
sliding window sash Mar
clear
of anycover
drillingand
debris
which
assembled
6.isFit
screw
side
holemay
plugs
Position drilling
jig on the
rear vertical
and mark fixing and bolt hole positions. Bolt hole jig acc
operation of window.
toeffect
lock smooth
body
frame as
shown
and ensure notchFitted
on
andbolt
fu
6. Fit
screw cover and
hole
plugs
shouldside
be bent
at 90 degrees
to sit flat against frame
drilling
jig rests
on frame
upstand.
Ensure sliding window track is clear of
ven
upstand.
Ensure
window
is firmly
closed Bolt
before
to
lock
body
should
be bent
90notch
degrees
to
any drilling debris which may effect markinghole
bolt
boltjighole
position
andat
that
in drilling
siton
flat
frame
Ensure sliding window
track
isagainst
clear
of upstand. Ensure
win
jig rests
frame
upstand.
window is firmly closed before marking
any drilling debris which may
effect
bolt hole and fixing positions.
ration
ofcannot
lock in
closed
ay screws
be both
removed
once and vented
ifed.satisfactory, replace standard screws
4
ay screws3for greater security.Ø5mm
Note:
crews cannot be removed once
5
Ø7mm
Mount lock body
Mark and drill holes
Check operation
Before
15mm
side fixing
Check operation of lock in closed and
andholes
centre punch for drilling
3. MarkMark
andholes
drill
4.mounting,
Mountuse
lock
body
screws to form thread in lock body holes,
vented positions - if satisfactory, replace
accuracy. Drill 5mm clearance holes and
Mark holes
and
center
punch
for
drilling
Before
mounting,
use
thread
cutting
screws
and snap thin end off side packer. Fix
screws
with
one way screws for security.
7mm bolt hole in marked positions.
drill
holes
4.
Mount
lock
body
accuracy. Drill 5mm fixing holes and 7mm
to form
thread
in lock
body holes,
andway
snap
lock body
to sash
using 15mm
fixing
Note: One
screws cannot be
5.side
Test
dbolt
center
punch
for
drilling
Before
mounting,
use
thread
cutting
screws
through
packer
and intoFix lock
removed
hole in We
marked
If abolt
securescrewsthin
endsash
offand
side
packer.
body
totightened.
Check
operation
ofonce
lock
in both closed
suggestpositions.
drilling a second
5.
Test
lock
body.
lventing
5mm fixing
holes
7mm drill
toforform
threadsash
in lock
body
holes,
and Check
snap
position
is and
required,
aa second
using
metal
thread
screws
through
hole 100mm
from the first
operation
of lock
in satisfactory,
both
closed
and
vented
positions
if
Repeat
Step
6 from
face fixing
6 positions - if satisfactory,
arked
positions.
a secure
thin end off side
packer.
Fix lock
body
tolock
secure
gap.100mm
and
vented
bolt hole
with
noIfventilation
more
than
sash
and packer
and
into
body.
instructions
to
fit screw
cover
replace
standard
screws
with
one
way
replace
standard
screws
with
one
way
on
is required,
drill a second sash using metal thread screws through
and side hole plugs
window
opening.
screws
for greatersecurity.
security. Note:
One One
screws
for
greater
Note:
no more than 100mm
sash and packer and into lock body. way screws cannot be removed once
way screws
cannot be removed once
tightened.
ng.
10 Year Warranty
tightened.
The warranty covers manufacturing defects, standard finishes but excludes plated finishes or finishes exposed to a corrosive
environment. The warranty excludes damage caused by installation contrary to written instructions and incidental or consequential
damage. We recommend regular cleaning with mild detergent.
CYL4: With One Key Security you can use a single key to operate all the locks in your home. This lock can be supplied
keyed alike in any quantity and keyed alike to a variety of ASSA ABLOY locks including most similar products of other
makes. Get one key convenience simply by asking your retailer.
ASSA ABLOY New Zealand Limited
6 Armstrong Road, Albany
Auckland 0632, New Zealand
www.yalelock.co.nz
For customer feedback: [email protected]
An ASSA ABLOY Group brand
Patent NZ 326495, AU 727454, GB 2325021
6. Fit scre
lock body
Ensure sli
drilling deb
operation