TopEdge™ - Canplast
Transcription
TopEdge™ - Canplast
REFERENCE GUIDE 2011 www.canplast.com TopEdge ™ A SURTECO DIVISION TABLE OF CONTENTS INTRODUCTION 3 TOPEDGE™ – THE PROGRAM THE ADVANTAGES 4 4 THE PRODUCTS SOLIDS WOODGRAINS GRAINTHRU™ WOODGRAINS KLEAR-VU™ TOPMELT™ - ADHESIVES 5 6 7 8 9 11 LAMINATE LISTINGS ARBORITE ATC FLAKEBOARD FORMICA FUNDER KML NEVAMAR PANOLAM PANVAL PIONITE ROSEBURG DURAMINE TAFISA WILSONART 14 17 19 23 26 28 30 33 36 38 40 43 45 STOCK AVAILABILITY WITH LAMINATE REFERENCE 50 PROCESSING INFORMATION PVC EDGEBANDING ABS EDGEBANDING KLEAR-VU EDGEBANDING 73 74 75 PACKAGING 76 TERMS AND CONDITIONS 78 1 INTRODUCTION Canplast is a leader in high-quality thermoplastic Edgebanding and Hotmelt Adhesives for the woodworking industry. With production facilities in Brampton, Ontario, Canada and Greensboro, North Carolina, USA and a North American-wide distribution system Canplast is perfectly suited to meet the service requirements throughout the United States, Canada and Mexico. The Canplast philosophy is built on three main principles: Experience Quality Service Since 1976, Canplast has been going the distance to give you the edge. The company has established long-lasting relationships with customers in the office furniture, institutional cabinetry, store fixture, residential furniture and kitchen cabinetry industry. Customers are trusting us to deliver high-quality Edgebanding and Adhesive products on time. With state-of-the-art extrusion plants, continuously trained staff, quality guidelines that follow ISO 9000 standards Canplast’s goal is to produce and deliver consistently high-quality products. Canplast warehouses in Brampton, Ontario and Greensboro, North Carolina and the added distribution network spanning from North to South and East to West Canplast provides woodworkers the required quick service, locally. Canplast new TopEdge™ stock program offers one of the largest selection of PVC, ABS and Klear-Vu™ Acrylic Edgebanding in North America. This Product Guide is a companion to our website. The stock availability and crossreference between Canplast colors and leading high-pressure laminate and thermofused melamines are available at: www.canplast.com Canplast is a member of Surteco SE, one of the world’s leading manufacturers of decorative surface foils and Edgebanding. 3 TOPEDGE™ – THE BRAND NEW CANPLAST STOCK PROGRAM THE PROGRAM THE ADVANTAGES • TopEdge™ is Canplast’s refined stock program reflecting on the growing market segment of Thermofused Melamines (TFM). • Canplast TopEdge™ high-quality Edgebanding adds value to your furniture line. • Made from high-quality thermoplastic resins. • TopEdge offers the most popular solids, woodgrains and designer patterns in the surface industry matching over 3,000 different high-pressure laminates and thermofused melamines. ™ • TopEdge™ comes in 10 different sizes in PVC and ABS from .018” up to 3mm thickness. • TopEdge is cross-referenced to all leading thermofused melamine manufacturers. ™ 4 • The TopEdge™ stock program is consistently updated to reflect on the latest color and design trends. • TopEdge™ is available in single roll quantities directly from your local distributor. • Please visit www.canplast.com to view all stocked colors, sizes and to locate your closest distributor. TopEdge ™ TopMelt ™ • Available in single rolls in all standard sizes and thicknesses. • A large selection of solids, woodgrains, Grainthru ™ and designer patterns crossreferenced to all leading melamine manufacturers is available. • Shipment in 24/48 hours from Canplast distribution center. • Custom sizes and colors available upon request. • We also offer TopMelt™ woodworking adhesives in granular and cartridges from stock. • One stop shopping for all your TopEdge™ Edgebanding and TopMelt™ Adhesive needs. THE PRODUCTS Made from high-quality thermoplastic resin, Canplast PVC and ABS Edgebanding adds a smooth, finished look to furniture. Canplast Edgebanding is used on cabinets, shelves, store fixtures, deskand countertops outperforming a host of other materials in edge protection. Canplast Edgebanding is ideal for all types of institutional, office and residential furniture, store fixtures, millwork as well as kitchen and bathroom cabinetry. 5 SOLIDS Canplast solid color Edgebanding can be used in an unlimited range of applications. The computermatched color throughout the thickness allows the Edgebanding to blend in perfectly and makes the joint between the Edgebanding and the board surface virtually invisible. 6 WOODGRAINS Canplast library of more than 600 print cylinders allows exact matches to the most sophisticated woodgrain surfaces including stained doors. The company’s experienced staff, computer-aided matching processes and state-of-the-art printing allow for exact matches to different shades of maple, walnut, oak, beech, birch and other wood species including different woodgrain embossing options. 7 GRAINTHRU™ WOODGRAINS Canplast has developed a unique means of injecting a realistic woodgrain effect throughout the thickness of the 3mm PVC woodgrain Edgebanding. A variety of different Grainthru™ woodgrains are immediately available via the Canplast TopEdge™ stock program. The Grainthru™ effect eliminates ‘picture framing’ sometimes associated with Thick PVC Edgebanding. The base color is specifically blended to unify the Edgebanding with the panel pattern. 8 KLEARVU™ EDGEBANDING Canplast KLEAR-VU™ Edgebanding provides the highest Edgebanding quality available in the marketplace. KLEAR-VU™ Edgebanding is made from transparent acrylic and is printed from the reverse providing a three dimensional ‘look’ and a solid protection against scratches. The KLEAR-VU™ advantages: • Scratching and marring of the Edgebanding surface can be easily polished away. The color remains protected. • The printing on the back of the Edgebanding remains intact even on the milled radius providing a continuous transition from the Edgebanding to the board surface. • KLEAR-VU™ Edgebanding can be applied with standard Edgebander equipments. Glues that contain solvents like some contact adhesives may not be used. Please refer to the KLEAR-VU™ Processing Information. (Page 75) • KLEAR-VU™ is available from the Canplast TopEdge™ stock program and includes an attractive color range of woodgrains, stainless steel and brushed aluminum patterns. 9 Canplast Number Material 15/16” x 1mm 15/16” x 2mm 1-5/16” x 2mm KLEAR-VU™ STOCK PROGRAm Brushed Aluminum K09859 Acrylic ● ● ● Satin Aluminum K09870 Acrylic ● ● ● Brushed Stainless K09874 Acrylic ● ● ● Brushed Titanium K09880 Acrylic ● ● Multiplex-Beech K55130 Acrylic ● ● Carbone Fibre K09860 Acrylic ● ● ● Black K01005 Acrylic ● ● ● Hardrock Maple K58291 Acrylic ● ● Multiplex Nature K55131 Acrylic ● Aluminum Flake K09867 Acrylic ● Walnut Aluminum K09868 Acrylic ● Copper K09871 Acrylic Aluminum Structure K55554 Acrylic ● Aluminum Reflector K55555 Acrylic ● Maple Woodline (Formica 6925) K55258 Acrylic ● Smoky Walnut Woodline (Formica 6926) K55260 Acrylic ● Cherry Woodcut (Formica 6928) K55257 Acrylic ● Mahogany Woodcut (Formica 6929) K55263 Acrylic ● Natural Cane (Formica 6930) K55259 Acrylic ● Latte Walnut (Formica 6931) K55255 Acrylic ● Macchiato Walnut (Formica 6932) K55256 Acrylic ● Zebrano (Formica 9011) K55261 Acrylic ● Ebony (Formica 9012) K55262 Acrylic ● Canplast Name 10 ● ● CANPLAST TOPMELT™ QUALITY HOTMELT ADHESIVES FOR EDGEBANDING AND SOFTFORMING Canplast TopMelt™ premium, high-performance Ethylene Vinyl Acetate (EVA) hotmelt Adhesives are specially formulated for various types of Edgebanding materials and edgebanders used by makers of kitchen and bathroom cabinets, residential and RTA furniture, office furniture, store fixture and other woodworking applications. TopMelt™ advantages: Canplast TopMelt™ high-quality woodworking Adhesives in cartridge and granular form are suitable for all common HOLZ-HER, IMA, HOMAG and BIESSE edgebanders. • Available in natural, white, brown, black and translucent as well as filled and unfilled. • Suitable for PVC, ABS, solid wood, veneer, melamine and acrylic Edgebanding. • Geared towards automatic and manual edgebander equipment. • Permanently updated stock program to meet the needs of modern woodworkers. 11 12 Comments GLUE NOZZLE MINIMUM FEED SPEED METER /MINUTE APPLICATION ROLLER APPLICATION TEMP. BBASE SOFTENING POINT TYPE OF ADHESIVE VISCOSITY (BROOKFIELD) AT 200°C (392°F) IN MPAS ADHESIVES FOR EDGEBANDING 2022 EVA Cartridge 60,000 100°C 180 200°C 2026 EVA Cartridge 50,000 105°C 180 200°C 2024 EVA Cartridge 35,000 125 145°C 175 200°C 2030 EVA Pellets 90,000 110°C 190 210°C 30-60 m/min Special economy - Hotmelt for 1mm and 2mm edgebanding thicknesses 2031 EVA Pellets 74,000 100°C 180 200°C 12-40 m/min Good - General purpose hotmelt recommended for straightline edgebanding and softforming. 2035 EVA Pellets 90,000 110°C 190 210°C 12-60 m/min Better - Medium-high viscosity hotmelt. Very good heat stability, good wetting. Suitable for precoating and softforming applications. 2041 EVA Pellets 60,000 100°C 180 200°C 20-40 m/min Best - Premium general purpose hotmelt recommended for straightline edgebanding, superior heat and bonding properties. 2050 EVA Pellets 80,000 97°C 180 200°C 10-75 m/min Überglue - Unfilled, medium viscosity hotmelt that bonds even the most difficult materials, clear appearance for invisbile glue line. 2001 EVA Pellets 95,000 105°C 190 210°C 18-60 m/min Clear Hotmelt - Premium transluscent hotmelt for an invisible glue line 2020 EVA Pellets 20,000 150 170°C 5 - 40 m/min LOW TEMPERATURE GLUE for manual contour edgebanders 18 - 60 m/min 10-40 m/min Better - All purpose cartridge hotmelt for HOLZHER edgebanders with good resilience during cold and hot temperatures. 10-40 m/min Best - Medium viscosity cartridge hotmelt for HOLZHER edgebanders with high heat resistance and good cold flexibility. Excellent color and heat stability in the glue pot. Clear Hotmelt - Low viscosity cartridge hotmelt for HOLZ-HER edgebanders, clear appearance for invisible glue line ADHESIVE PRODUCT SELECTOR SOLID WOOD HPL EDGEBANDING MATERIAL MELAMINE MACHINERY POLYESTER COMMENT VENEER BASE ABS ADHESIVE PVC APPLICATION 2024 EVA, UNFILLED Superior Holz-her ● ● ● ● ● ● ●* 2026 EVA, UNFILLED Best Holz-her ● ● ● ● ● ● ●* 2022 EVA, FILLED Better Holz-her ● ● ● ● ● ● ●* 2001 EVA, UNFILLED Superior All common edgebanders ● ● ● ● ● ● ●* 2041 EVA, FILLED Best All common edgebanders ● ● ● ● ● ● ●* 2035 EVA, FILLED Better All common edgebanders ● ● ● ● ● ● ●* 2031 EVA, FILLED Good All common edgebanders ● ● ● ● ● ● ●* 2030 EVA, FILLED Special All common edgebanders ● ● ● ● ● ● ●* MANUAL CONTOUR 2020 EVA, FILLED Best All common edgebanders ● ● ● ● ● ● ●* SOFTFORMING 2035 EVA, FILLED Best All common edgebanders ● ● ● ● ● ● ●* 2031 EVA, FILLED Better All common edgebanders ● ● ● ● ● ● ●* 2024 EVA, UNFILLED Best Holz-her ● ● ● ● ● ● ●* 2050 EVA, UNFILLED Best All common edgebanders ● ● ● ● ● ● ●* 2001 EVA, UNFILLED Better All common edgebanders ● ● ● ● STRAIGHTLINE MINIMAL GLUE LINE 13 ● LAMINATE LISTINGS A SURTECO DIVISION ARBORITE 14 1-5/8" x 3mm S414 1-5/16" x 3mm S407 1-5/16" x .020 Silver Grey 1-1/8" x .020 Textured S406 15/16" x 3mm 1005 TL 15/16" x 2mm Black 15/16" x 1mm S405 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Arborite Number 3/4" x .018 Textured SOLID COLORS ● ● ● ● ● ● ● ● ● ● ● 1031 TL ● ● ● ● Ivory 1267 TL ● Forest Green 1619 TL ● S417 Snow White 1463 TL S419 Burgundy 1901 TL ● S431 Willow Grey 1035 TL ● S434 Charcoal 2035 TL ● S445 Almond 2514 TL S463 Antique White 1578 TL S466 Bright Red 1389 TL ● ● S486 Beige 2545 TL ● ● S497 Ultramarine 1125 TL ● ● S498 Fire Red 1393 TL ● S508 Cordova Brown 1026 TL ● ● ● ● ● S513 Denim Blue 1133 TL ● ● ● ● ● S548 Custom Grey 2024 TL ● ● ● ● S550 Elegant White 1460 TL ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● S568 Midnight Blue 1120 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION ARBORITE 6571 TL ● ● ● Wild Cherry 58429 TL ● W405 Brandy Cherry 56967 TW ● W407 Rustik 86162 TL-2 ● W412 Wenge 56496 TL ● W414 Cherry Jubilee 57600 TL ● W416 Caramel Applewood 58127 TL ● W417 Spiced Walnut 57244 TM ● W418 Walnut Fudge 6642 TL ● W420 Summer Flame 56643 TL ● W421 Candlelight 57048 TL ● W424 Mocha Rosewood 58721 TL ● W425 Burnished Rosewood 57809 TW ● Gold Speckle Maple 55195 TL ● Architectural Maple 7500 TL ● 1541 Mahogany Vision 57602 TL ● ● W134 Cognac Curly Anigre 58416 TL ● ● W138 Burnished Cherry 57225 TL ● ● W230 Sliced Red Oak ● ● W305 Parliament Walnut 58727 TL ● ● W372 Mahogany 7423 TL ● W373 Castle Oak 6708 TL W403 Natural Anigre W404 6789 TL 1-5/8" x 3mm 1-5/16" x 3mm ● 1531 1539 1-1/8" x .020 Textured ● 15/16" x 3mm ● 15/16" x 2mm ● 15/16" x 1mm ● 15/16" x .018 ● Canplast Number 15/16" x .018 Textured ● Color 7/8" x .018 Textured ● Arborite Number 3/4" x .018 Textured 1-5/16" x .020 WOODGRAINS ● ● ● ● 15 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● W444 Chocolate Pear Tree 57458 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION ARBORITE 16 P231 Terranova 9190 TL ● P238 Palermo Argilla 86134 TL ● P258 Tatami Kuriimu 58080 TL P623 Brushed Aluminum 58773 TW P885 Black Grit 9002 TL ● P886 Grey Grit 9008 TL ● 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Arborite Number 3/4" x .018 Textured DESIGNER PATTERNS ● Navy Grit 9124 TL P994 Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION ATC 15/16" x .018 Textured 15/16" x 1mm 15/16" x 2mm 15/16" x 3mm 1-1/8" x .020 Textured 1-5/16" x .020 1-5/16" x 3mm White 1498-9 ● ● ● ● ● ● ● ● ● Porcelain White 1401-9 ● ● ● ● ● ● ● ● ● S103 Economy White 1463-9 ● ● ● ● ● ● ● ● ● S104 Bright White 1498-9 ● ● ● ● ● ● ● ● ● S109 Cabinet White 1463-9 ● ● ● ● ● ● ● ● ● ● ● S110 Antique White 1578-9 ● ● ● ● ● ● ● ● ● ● S122 Canadian Almond 2514-9 ● ● ● ● ● ● ● ● ● S124 New England Almond 1543-9 ● ● ● ● ● ● ● S131 Fog Grey 1031 TL ● ● ● ● ● ● S135 Folkstone Grey 1066-9 ● ● ● ● ● ● ● ● ● ● ● Color Canplast Number ● ● ● ● ● ● ● ● ● ● ● S140 Black 1005-9 ● 1-5/8" x 3mm 7/8" x .018 Textured S101 S102 ATC Number 15/16" x .018 3/4" x .018 Textured SOLID COLORS ● ● ● 17 ATC 57657 TL ● W223 Fusion Maple 5191 TL ● W229 Manitoba Maple 56524 TL ● W231 Natural Maple 56518 TL ● W236 Plane Tree Maple 58080 TL ● W254 Oiled Cherry 57675 TL ● W255 Caramel Cherry 57604 TL ● W258 Natural Cherry 56329 TL ● W261 Royal Cherry 56589 TM ● W263 Espresso Cherry 56414 TL ● W264 Mocha Cherry 58790 TM ● ● 1-5/8" x 3mm ● 1-5/16" x 3mm ● 1-5/16" x .020 ● 1-1/8" x .020 Textured 15/16" x 3mm Dark Oak 15/16" x 2mm W206 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured ATC Number 3/4" x .018 Textured WOODGRAINS ● ● ● ● ● ● ● ● ● ● ● ● W265 ● ● ● ● Traditional Cherry 56635 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION ATC 18 56589 TM ● W280 Apple Wood 58586 TL ● ● ● 1-5/8" x 3mm 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 1-5/16" x 3mm Amber Cherry 1-5/16" x .020 W266 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured ATC Number 3/4" x .018 Textured WOODGRAINS ● W287 Crème Brulee 55195 TL ● W290 Pearwood 5214 TL ● ● ● W292 Light Apple 58518 TL ● ● ● W294 Burnt Apple 58418 TL ● ● ● W295 Chocolate Apple 57458 TL ● ● ● ● ● W297 Brazilian Walnut 55127 TW Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION FLAKEBOARD 1-5/16" x .020 1-5/16" x 3mm 1-5/8" x 3mm ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 1-1/8" x .020 Textured 1-5/16" x .020 1-5/16" x 3mm 1-5/8" x 3mm ● ● 2514-9 ● ● ● ● ● ● Black 1005-9 ● ● ● ● ● ● ● SF100 Victorian White 1578-9 ● ● ● ● ● ● SF200 Vanilla 2514-9 ● ● ● ● SF204 Opal 2514-9 ● ● ● SF208 Folkstone 1066-9 ● ● ● SF210 Antique White 1452 TL SF211 Beige 2514-9 ● ● SF213 Fog Grey 1060-9 ● W100 White 1463-9 ● W300 White 1472 TL W400 White 1401-9 A920 BLK100 Color Canplast Number 3/4" x .018 Textured Almond Flakeboard Number ● 1-1/8" x .020 Textured ● 15/16" x 3mm ● 15/16" x 2mm ● 15/16" x 1mm ● 15/16" x .018 ● ● 15/16" x .018 Textured ● ● 7/8" x .018 Textured ● 15/16" x 3mm SOLID COLORS ● ● ● ● ● ● ● ● ● ● ● ● ● W555 White 1498-9 19 FLAKEBOARD 15/16" x 2mm 15/16" x 1mm 1035 TL ● ● W265 Absolute Myrtle 57599 TL ● ● ● WF100 Desert Glow 58518 TL ● ● ● WF101 Autumn Glow 56643 TL ● WF103 Mink Glow 55467 TL ● WF105 Java Glow 55468 TL ● WF107 Persian Cherry 56411 TL ● WF108 Kashmir Cherry 5191 TL ● WF116 Brunette Pinstripe 55461 TL Canplast Number 15/16" x .018 Textured Willow Grey Color 7/8" x .018 Textured WF214 Flakeboard Number 3/4" x .018 Textured 15/16" x .018 WOODGRAINS ● ● ● ● ● ● WF118 Ash Pinstripe 55469 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION FLAKEBOARD ● ● 55127 TW ● ● Zhu 55499 TL ● WF228 Sable Glow 57458 TL ● WF229 Merit Maple 55475 TL ● WF230 Cherry Hill Plank 56496 TL ● ● ● WF122 Silken Maple 55466 TL ● WF200 Ruston Maple 56518 TL ● WF202 Verismo 55470 TL ● WF203 Seria 55471 TL ● WF204 Baroque 55472 TL ● WF205 Teresina 55473 TL ● WF206 Portia Glow 57602 TL ● WF207 Orissa Cherry 55474 TL ● WF208 Libretti 56496 TL ● WF217 Ambrose Cherry 58790 TL ● WF218 Rathburn Cherry 58411 TL ● WF219 Porter Mahogany 7295 TL WF220 Brazilian Walnut WF227 WF231 Lucca Cherry 55476 TL ● WF236 Ankara Cherry 57656 TL ● WF238 Muscovado Cherry 55477 TL ● WF240 Gypsy Alder 55127 TL ● WF242 Contract Mahogany 55478 TL ● WF256 Bartlett Pear 58429 TL ● WF257 Executive Cherry 56905 TL ● WF258 Macassar Ebony 55479 TL ● WF259 Majestic Walnut 55464 TL ● WF260 Manzana 55480 TL ● WF261 Portland Cherry 56499 TL ● ● 1-5/8" x 3mm ● ● 1-1/8" x .020 Textured ● 55462 TL 15/16" x 3mm 1-5/16" x 3mm 20 Burma Cherry 15/16" x 2mm ● WF121 15/16" x 1mm ● 15/16" x .018 ● Canplast Number 15/16" x .018 Textured ● Color 7/8" x .018 Textured ● Flakeboard Number 3/4" x .018 Textured 1-5/16" x .020 WOODGRAINS ● ● ● ● ● ● ● ● ● ● Zebrano 55481 TL WF262 Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION FLAKEBOARD ● ● 7937 TL ● ● ● ● Autumn Wave 55459 TL ● WF291 Desert Wave 55460 TL ● WF293 Butterschnapps 55489 TL ● 86167 TL ● ● Cabinet Maple 58011 TM ● ● WF272 Cinnamon Myrtle 57661 TL ● ● WF275 Hard Rock Maple 55482 TL ● WF276 Harvest Cherry 58027 TL ● WF279 Mahogany 7295 TL ● WF280 Marlboro Cherry 56632 TL ● WF281 Medium Sycamore 56411 TL ● WF283 Natural Oak 55465 TL ● WF284 Oiled Cherry 56631 TL ● WF285 Red Oak 58642 TL ● WF288 Sliced Red Oak 56523 TL WF289 Woodlawn Cherry WF290 WF294 Vanilla Stix 55490 TL ● WF295 Cocoa Bliss 55491 TL ● WF296 Mochatini 55492 TL ● WF297 En Vogue 55493 TL ● WF298 Cosmo 55494 TL ● WF299 Nirvana 55495 TL ● WF300 Noce Panaro 55496 TL ● WF301 Noce Vettore 55497 TL ● 1-5/8" x 3mm 1-5/16" x 3mm ● Walnut Amati WF270 1-1/8" x .020 Textured ● WF263 15/16" x 3mm ● 15/16" x 2mm ● 15/16" x 1mm ● 15/16" x .018 ● Canplast Number 15/16" x .018 Textured ● Color 7/8" x .018 Textured ● Flakeboard Number 3/4" x .018 Textured 1-5/16" x .020 WOODGRAINS ● WF310 Talas Cherry 55498 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. 21 LAMINATE LISTINGS A SURTECO DIVISION FLAKEBOARD AF210 Silver Frost 86151 TW ● 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Flakeboard Number 3/4" x .018 Textured DESIGNER PATTERNS ● ● AF212 Grey Glace 9032 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. 22 A SURTECO DIVISION FORMICA 15/16" x 3mm 1-5/16" x .020 1-5/16" x 3mm 1-5/8" x 3mm ● ● ● ● ● ● ● ● ● ● Stop Red 1389 TL ● ● ● 845 Spectrum Red 1379 TL ● ● ● 851 Spectrum Blue 1125 TL ● ● ● 858 Pumice 1587 TL ● 899 Desert Beige 1511 TL ● 902 Platinum 1099 TL ● 909 Black 1005 TL 912 Storm 1097 TL ● 913 Indian Smoke 1599 TL ● 914 Marine Blue 1189 TL ● 918 Neutral White 1464 TL ● 920 Almond 2514 TL 921 Birch 923 Ivory 2584 TL 463 Sail White 1578 TL 837 Graphite 839 1-1/8" x .020 Textured ● 460 15/16" x .018 1026 TL Canplast Number 15/16" x .018 Textured ● Color 7/8" x .018 Textured ● Formica Number 3/4" x .018 Textured 15/16" x 1mm 15/16" x 2mm SOLID COLORS ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 23 ● ● 2014 TL ● ● Surf 1065 TL ● 925 Champagne 2542 TL ● ● ● ● ● ● ● ● ● ● 927 Folkstone 1066 TL ● ● ● ● ● ● ● ● ● ● 928 Mouse 1044 TL ● ● ● ● ● ● ● ● ● ● 929 Oyster Grey 1061 TL ● 932 Antique White 1452 TL ● 933 Mission White 1454 TL ● 934 Pearl 1443 TL ● 949 White 1463 TL 958 Beige 1582 TL 961 Fog 1060 TL 966 Burgundy 1901 TL ● ● 967 Hunter Green 1619 TL ● ● 969 Navy Blue 1120 TL ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 7197 Dover White 1498-9 Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION FORMICA Natural Oak 6789 TL ● ● ● ● ● ● ● ● ● ● 24 758 Blossom Cherrywood 56643 TL ● 1150 Vosges Pear 56528 TL ● 5904 Wild Cherry 57675 TL ● 6209 Prestige Walnut 58513 TL ● 6929 Mahogany Woodcut 7872 TL ● 6933 Choco Figured Mahogany 58882 TL ● 7008 Acajou Mahogany 7295 TL ● 7012 Amber Maple 5155 TL ● 7284 Figured Anigre 58416 TL ● ● 7285 Violin Figured Anigre 58411 TL ● ● 7288 Ginger Root Maple 56618 TL ● ● ● ● 7484 Cherry Birch 56631 TL ● ● ● ● 7739 Cocoa Maple 58721 TL ● 1-5/8" x 3mm 1-5/16" x 3mm 346 1-1/8" x .020 Textured ● 15/16" x 3mm ● 15/16" x 2mm ● 15/16" x 1mm ● 15/16" x .018 6789 TL Canplast Number 15/16" x .018 Textured Finnish Oak Color 7/8" x .018 Textured 118 Formica Number 3/4" x .018 Textured 1-5/16" x .020 WOODGRAINS ● ● ● ● ● 7759 Select Cherry 56635 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION FORMICA 503 Stone Grafix 9066 TL ● 506 Beige Grafix 9068 TL ● 507 Folkstone Grafix 9017 TL ● 515 Graphite 9023 TL ● 692 Folkstone Celesta 9032 TL ● 7018 Navy Grafix 9124 TL ● 7500 Noir Envision 9327 TL ● 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Formica Number 3/4" x .018 Textured DESIGNER PATTERNS ● ● 7813 Cardboard Solidz 9696 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. 25 LAMINATE LISTINGS A SURTECO DIVISION FUNDER ● ● ● ● ● ● ● ● ● ● ● ● ● ● 1-5/8" x 3mm ● 1-5/16" x 3mm 1060-9 ● 1-5/16" x .020 Fog ● 1-1/8" x .020 Textured 128 15/16" x 3mm 1005-9 15/16" x 2mm Black 15/16" x 1mm 107 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Funder Number 3/4" x .018 Textured SOLID COLORS ● ● ● ● ● ● ● ● ● 459 White 1474 TL 607 Bisque 4563-9 823 Almond 1543-9 ● ● ● ● ● ● ● ● ● 941 Nova White 1498-9 ● ● ● ● ● ● ● ● ● 955 Folkstone 1066-9 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 971 McKinley White 1463-9 FUNDER 55450 TL ● 224 Nina 55451 TL ● 225 Pinta 55449 TL ● 363 Chocolate Pear 57458 TL ● ● ● 364 Summer Flame 58535 TL ● ● 365 Honey Apple 58518 TL ● ● 366 Kona/Cayenne 57759 TL ● ● 370 Cherry Pear 58429 TL ● ● ● 214 Lewis 55406 TL ● 215 Santa Maria 55453 TL ● 219 Magellan 55407 TL ● 1-5/8" x 3mm Columbus 55405 TL 1-5/16" x 3mm 223 Clark 1-5/16" x .020 15/16" x 3mm ● 213 1-1/8" x .020 Textured 15/16" x 2mm ● 55408 TL 15/16" x .018 55452 TL Hudson Canplast Number 15/16" x .018 Textured Drake Color 7/8" x .018 Textured 221 222 Funder Number 15/16" x 1mm WOODGRAINS 3/4" x .018 Textured 26 ● ● ● 371 Brandy Fruitwood 56589 TM Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION FUNDER ● ● 388 Wild Apple 58418 TL ● ● 437 Manhattan 57661 TL ● ● 454 Mocha 57656 TL ● ● ● 498 Espresso 57657 TL ● ● ● 556 Grand Cherry 58411 TL ● ● 557 Nutmeg Cherry 58416 TL ● ● 563 Wild Cherry 55147 TL ● ● 567 Mahogany 57605 TL ● ● 570 Arbor Myrtle 58417 TL ● ● ● 572 Grove Myrtle 57599 TL ● ● ● 573 Sycamore 57604 TL ● ● 580 Riviera Maple 56524 TL ● ● 596 Bank Alder 57603 TL ● ● 603 Lauren Mahogany 57600 TL ● ● 604 Gordon Cherry 57602 TL ● ● 610 Hardrock Maple 58011 TM ● ● 692 Country Maple 7734 TL ● 703 Shaker Pear 58429 TL ● ● 755 Cherrywood 58410 TL ● ● 795 Fusion Maple 58331 TL ● ● D336 Candlelight 58779 TL-2 ● ● D337 Autumn 86162 TL-2 ● ● ● ● 1-5/8" x 3mm 57664 TL 1-5/16" x 3mm Crossfire 1-5/16" x .020 15/16" x 3mm 381 1-1/8" x .020 Textured 15/16" x 2mm ● 15/16" x .018 ● 15/16" x .018 Textured ● Canplast Number 7/8" x .018 Textured Spiced Fruitwood 57244 TM Color 3/4" x .018 Textured 372 Funder Number 15/16" x 1mm WOODGRAINS ● ● 27 ● ● ● ● ● ● ● D375 Sienna 86167 TL-2 Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION KML 3/4" x .018 Textured 7/8" x .018 Textured 15/16" x .018 Textured 15/16" x .018 15/16" x 1mm 15/16" x 2mm 15/16" x 3mm 1-1/8" x .020 Textured 1-5/16" x .020 1-5/16" x 3mm 1-5/8" x 3mm SOLID COLORS 1005-9 ● ● ● ● ● ● ● ● ● ● ● KMD701 International White 1463-9 ● ● ● ● ● ● ● ● ● ● ● KMD710 Rainier White 1401-9 ● ● ● ● ● ● ● ● ● ● KMD716 Antique White 1578-9 ● ● ● ● ● ● ● ● ● KMD721 Folkstone 1066-9 ● ● ● ● ● ● ● ● ● KMD722 Fog 1060-9 ● ● ● ● ● ● ● ● KML Number KMAU002 Color Black Canplast Number ● ● ● ● ● ● ● ● ● ● ● ● KMD730 Almond 2514-9 KML 1-5/16" x 3mm ● ● ● ● ● ● ● ● ● ● ● 56643 TL ● KMAH1232 Pearwood 5214 TL ● KMAH1304 Oiled Cherry 56631 TL ● KMAH1425 Cherry Blossom 57809 TW ● KMAH1465 Resawn Walnut 58721 TL ● KMAH600 Candlelight 58518 TL ● KMAK600 Napa Cherry 58791 TL ● KMD605 Cognac 58418 TL ● KMD621 Mojave Alder 58790 TM ● KMD625 Chocolate Pearwood 58513 TL ● KMD732 African Walnut 55127 TW ● ● KMD738 June Mahogany 7295 TL ● ● KMD777 Cordoba Pine 57657 TL ● KMD778 Regal Cherry 56631 TL ● ● KMW7110 Montana Walnut 58727 TL ● ● ● ● ● ● ● ● 1-5/8" x 3mm 1-5/16" x .020 ● KMAH1222 Summerflame 1-1/8" x .020 Textured ● 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm Canplast Number 15/16" x .018 Color 7/8" x .018 Textured KML Number 3/4" x .018 Textured 28 15/16" x .018 Textured WOODGRAINS ● ● ● ● KMW7816 Solar Oak 6708 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION KML 7734 TL ● KMW7922 Brighton Walnut 56500 TL ● KMW7928 Castle Oak 58642 TL ● KMW7938 New Age Oak 58610 TL ● KMW7941 Tan Echo 57810 TW ● KMW7943 Colombian Walnut 6642 TL ● KMW7945 Xanadu 57813 TW ● KMW7946 Brazilwood 58771 TL ● KMW7949 Asian Knight 58754 TW ● KMW7951 Asian Sun 58768 TL ● ● ● 1-5/8" x 3mm 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm ● 1-5/16" x 3mm Manitoba Maple 1-5/16" x .020 KMW7911 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured KML Number 3/4" x .018 Textured WOODGRAINS KML 29 KMW4842 Canyon Zephyr 86115 TL ● KMW4853 Mission Stone 86134 TL ● KMW4879 Steel Mesh 86152 TL ● KMW4880 Carbon Mesh 86138 TL ● 1-5/8" x 3mm ● 1-5/16" x 3mm 86151 TW 1-5/16" x .020 Silver Frost 1-1/8" x .020 Textured KMAK610 15/16" x 3mm Color 15/16" x 2mm KML Number 15/16" x 1mm 15/16" x .018 15/16" x .018 Textured 7/8" x .018 Textured Canplast Number 3/4" x .018 Textured DESIGNER PATTERNS ● ● KMW4881 Copper Mesh 86119 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION NEVAMAR 30 S1015 Burgundy 1901 TL ● ● ● S1027 Liberty Red 1379 TL ● ● ● S1049 Carmen Red 1389 TL ● ● ● S2019 Beige 1582 TL ● S2037 Almond 2514 TL S2063 Natural Beige 3500 TL ● S2069 Bethany Beige 1096 TL ● S2084 Foundry 2738 TL ● S2085 English Lace 2584 TL ● S2086 Jute 1037 TL ● S2110 Basic 2574 TL ● S3016 Regimental Blue 1189 TL ● S3023 Graphite Blue 1149 TL ● S3048 Patriot Blue 1125 TL ● S3055 Violine 2146 TL ● S3060 Indigo 1133 TL ● S6001 Black 1005 TL S6003 Dove Gray S6005 ● ● ● ● ● 1035 TL ● ● Putty 2535 TL ● S6012 Neutral Gray 1060 TL S6014 Black Pearl 1067 TL ● S6020 Gunmetal 2035 TL ● S6023 Platinum Gray 1099 TL ● S6024 Cordial Gray 2016 TL S6027 Maritime Gray ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 1044 TL ● ● S6031 Fossil Gray 2062 TL ● S6037 Studio Gray 2075 TL ● S7004 Solid White 1498-9 ● ● ● ● ● ● ● ● 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Nevamar Number 3/4" x .018 Textured SOLID COLORS ● ● ● ● ● ● ● S7005 Antique White 1452 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION NEVAMAR ● ● ● ● ● ● ● ● ● 15/16" x 1mm 15/16" x 2mm 15/16" x 3mm ● S7025 Neutra 2574 TL ● S7027 Smoky White 1449 TL S7032 Bone White 1463 TL S7036 Precision White 1474 TL S7038 Mallow White 1578 TL S7040 Spa White 3542 TL 1-5/8" x 3mm 1-1/8" x .020 Textured ● 1472 TL ● ● ● ● ● ● ● ● 1-5/8" x 3mm 15/16" x 3mm ● Chalk White 1-5/16" x 3mm 15/16" x 2mm ● S7024 1-5/16" x .020 15/16" x 1mm ● 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Nevamar Number 3/4" x .018 Textured SOLID COLORS ● ● ● ● ● ● ● ● NEVAMAR 1-5/16" x 3mm ● ● ● ● W8352 Regency Mahogany 56619 TL ● ● ● ● WC2001 Caluna Cherry 58518 TL ● WF0001 Edenwood 56025 TL ● 1-1/8" x .020 Textured Sovereign Cherry 56643 TL 7872 TL 15/16" x .018 W8325 Canplast Number 15/16" x .018 Textured Crown Cherry Color 7/8" x .018 Textured W8294 Nevamar Number 3/4" x .018 Textured 1-5/16" x .020 WOODGRAINS ● ● ● ● WF0002 Washington Apple 58229 TL ● WM5528 Vermont Maple 56518 TL ● ● ● ● WM8164 Rustic Quartered Oak 6789 TL ● ● ● ● WM8258 Beige Renaissance 56525 TL ● WM8340 Clear Maple 7568 TL ● ● ● ● WS9450 Royal Mahogany 7295 TL ● ● ● ● WT0003 Valencia Teak 57657 TL ● ● ● WW0013 Vantage Point Walnut 57244 TM ● ● ● ● ● ● ● WZ0028 Kona Blend 58772 TW Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. 31 LAMINATE LISTINGS A SURTECO DIVISION NEVAMAR 32 MR2003 Neutra Matrix 9068 TL ● MR2006 Straw Matrix 9098 TL ● MR3005 Navy Matrix 9124 TL ● MR3007 Blueberry Matrix 9096 TL ● MR5001 Green Matrix 9071 TL ● MR6001 Gray Matrix 9066 TL ● MR6002 Charcoal Matrix 9061 TL ● MR6004 Storm Gray Matrix 9015 TL ● MR6005 Winter Gray Matrix 9017 TL ● MR6007 Phantom Gray Matrix 9064 TL ● 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Nevamar Number 3/4" x .018 Textured DESIGNER PATTERNS ● MR7001 Studio White Matrix 9017 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION PANOLAM 15/16" x 3mm ● ● ● ● ● ● ● ● ● ● ● ● ● 1463-9 ● ● ● ● ● ● ● ● Snow White 1401-9 ● ● ● ● ● ● ● ● S429 Brittany Blue 1133 TL ● S431 Willow Grey 1035 TL ● ● S445 Almond 2514-9 ● ● S451 Pepper Dust 1096 TL S463 Antique White 1578-9 S477 Doeskin 2535 TL ● S491 Pumice 1587 TL ● S495 New Oyster Grey 1061 TL ● S548 Custom Grey 1066-9 Cabinet Almond 2514-9 S405 Black 1005-9 S409 Smoke Grey 1031 TL S411 Oxford White S417 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 1-5/8" x 3mm 15/16" x 2mm ● S402 1-5/16" x 3mm 15/16" x 1mm ● Canplast Number 1-5/16" x .020 15/16" x .018 ● Color 1-1/8" x .020 Textured 15/16" x .018 Textured ● Panolam Number 3/4" x .018 Textured 7/8" x .018 Textured SOLID COLORS ● ● ● ● ● ● ● ● ● ● ● ● ● 33 ● ● ● ● ● ● ● ● ● S551 Fog Grey 1060-9 ● ● ● ● ● ● ● ● ● S556 Almondine 2514-9 ● ● ● ● ● ● ● ● ● S557 International White 1449 TL ● S565 Storm 1097 TL ● S568 Surf 1443 TL ● S569 Birch 2014 TL ● ● ● ● ● S597 Prism Red 1379 TL ● ● ● S599 Prism Blue 1125 TL ● ● ● ● ● ● ● ● ● ● S645 True White 1474 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION PANOLAM W115 34 ● ● ● ● W140 Riviera Maple 56524 TL ● W144 Wild Cherry 7937 TL ● W155 Trytoo Savatre R55392 TL ● W156 Grand Cherry 56025 TL ● W163 Looks Likatre R55393 TL ● W176 Opto Printatre R55394 TL ● W190 Gunstock Savoy Walnut 58721 TL ● W194 Select Walnut 56611 TL ● W196 Appears Likatre R55395 TL ● W200 Aimtoo Savatre R55396 TL ● W201 Natural Maple 58011 TM ● W221 Leave Likatre R55397 TL ● W230 Sliced Red Oak 56523 TL ● W234 I Wantoo Savatre R55398 TL ● W245 Seems Likatre R55399 TL ● W256 Country Maple 7500 TL ● W268 Fusion Maple 56469 TL ● W271 Apple Spice 56524 TL ● W272 Nutmeg Cherry 58127 TL ● W273 Mahogany Clove 57602 TL ● ● W285 Knotty Pine 58331 TL ● ● W288 Corretto Cherry 58417 TL ● ● W289 Vienna Cherry 56632 TL ● W290 Hardrock Maple 6571 TL ● W292 Nightfall 57657 TL ● W333 Electo Printatre R55400 TL ● ● ● ● 1-5/8" x 3mm 58586 TL 1-1/8" x .020 Textured Cherry Cobbler 15/16" x 3mm ● 15/16" x 2mm ● 15/16" x 1mm ● 15/16" x .018 ● 15/16" x .018 Textured Sipping Seattle Java 56635 TL Canplast Number 7/8" x .018 Textured 1-5/16" x 3mm A48 Color 3/4" x .018 Textured Panolam Number 1-5/16" x .020 WOODGRAINS ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● W336 Sunset 58027 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION PANOLAM ● ● ● ● W372 Mahogany 7423 TL ● ● ● ● W373 Castle Oak 6708 TL ● ● ● W381 Chusto Printatre R55401 TL ● W383 Cabinet Oak 56572 TL ● W391 Natural Oak 6789 TL ● ● ● W393 Corporate Walnut 6642 TL ● W682 Township Maple 58416 TL ● ● W683 Glen Cherry 58518 TL ● ● W684 Field Cherry 56499 TL ● W685 Alcove Walnut 56634 TL ● W686 Woodland Birch 58027 TL ● W687 Grove Myrtle 57599 TL ● W688 Arbor Myrtle 56414 TL ● W689 Blackwood Sycamore 56411 TL ● 1-5/8" x 3mm 1-5/16" x 3mm 7295 TL ● ● 35 ● ● ● ● 1-5/16" x 3mm ● ● ● ● 1-5/16" x .020 Brown Pearwood 58513 TL 1-1/8" x .020 Textured Noble Mahogany W340 15/16" x 3mm W370 55093 TW 15/16" x 2mm ● Sunrise 15/16" x 1mm ● ● W338 15/16" x .018 57813 TW Mahogany Impression 55127 TW Canplast Number 15/16" x .018 Textured Thunderstorm W365 Color 7/8" x .018 Textured W359 Panolam Number 3/4" x .018 Textured 1-5/16" x .020 WOODGRAINS ● ● PANOLAM P890 Cactus Star 9017 TL ● P893 Desert Cloud 9011 TL ● P894 Saguaro 9071 TL ● 1-5/8" x 3mm 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Panolam Number 3/4" x .018 Textured DESIGNER PATTERNS ● P895 Ebony Sand 9002 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION PANVAL 15/16" x .018 Textured 15/16" x 1mm 15/16" x 2mm 15/16" x 3mm 1-1/8" x .020 Textured 1-5/16" x .020 1-5/16" x 3mm Super White 1498-9 ● ● ● ● ● ● ● ● ● 136 Almond 1543-9 ● ● ● ● ● ● ● ● ● Color Canplast Number 1-5/8" x 3mm 7/8" x .018 Textured 113 Panval Number 15/16" x .018 3/4" x .018 Textured SOLID COLORS 168 Canadian Grey 1060-9 ● ● ● ● ● ● ● 505 Arctic White 1401-9 ● ● ● ● ● ● ● ● ● 555 Nova White 1498-9 ● ● ● ● ● ● ● ● ● 805 Sunset Grey 1066-9 ● ● ● ● ● ● ● ● ● ● 810 Antique White 1578-9 ● ● ● ● ● ● ● ● ● ● 888 Nova Black 1005-9 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● New England Almond 1543-9 920 PANVAL 6908 TL ● 175 Bavarian Beech 56490 TL ● 176 Caramel Cherry 58518 TL ● 178 Brandy Cherry 56967 TW ● ● ● ● ● ● ● 1-5/8" x 3mm 1-5/16" x 3mm Mirage 1-5/16" x .020 166 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm Canplast Number 15/16" x .018 Color 15/16" x .018 Textured Panval Number 7/8" x .018 Textured WOODGRAINS 3/4" x .018 Textured 36 ● 204 Bourbon Cherry 56025 TL ● 206 Crema Cherry 57055 TL ● 207 Choco Cherry 57656 TL ● ● 221 Ruby Cherry 57602 TL ● ● 233 Heritage Maple 58779 TL ● ● 262 Sunrise Maple 58518 TL ● ● 385 Sapelli Mahogany 7295 TL ● ● ● ● 388 Finnish Oak 56523 TL ● ● ● ● ● ● ● ● ● ● Honduras Mahogany 7295 TL 421 Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION PANVAL 56523 TL ● 562 Manitoba Maple 55039 TL ● ● 5191 TL ● Pale Oak 56525 TL ● 745 Finesse 56611 TL ● ● ● ● 762 Shadow Oak 56496 TL ● ● ● ● 765 Port Maple 56499 TL ● 766 Cayenne Maple 56500 TL ● 832 Limoges Pear 56528 TL ● 959 Provincal Maple 56345 TL ● 965 Port 7937 TL ● ● ● ● 968 Imperial Maple 56329 TL ● ● ● ● 969 Bordeaux 56056 TL ● 971 Pear 5214 TL ● ● ● ● 978 Regal Cherry 56533 TL ● 992 Hard Rock Maple 7734 TL ● ● ● ● ● ● ● ● ● ● 1-5/16" x 3mm Bryan Maple 1-5/16" x .020 687 703 1-5/8" x 3mm ● 1-1/8" x .020 Textured ● 15/16" x 3mm 15/16" x 2mm 1-5/16" x 3mm Winter Oak 1-5/16" x .020 557 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Panval Number 3/4" x .018 Textured WOODGRAINS 37 PANVAL 1-5/8" x 3mm 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Panval Number 3/4" x .018 Textured DESIGNER PATTERNS ● 961 Stainless 9806 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION PIONITE 38 SB007 Navy Blue 1120 TL ● ● ● SB009 Royal Blue 1125 TL ● ● ● SB040 Lapis Blue 2128 TL SE101 Black 1005-9 SG203 Pumice SG204 ● ● ● 1035 TL ● ● Mercury 1071 TL ● SG208 Limestone 1065 TL ● SG210 Greige 1037 TL ● SG211 Ingot Gray 2035 TL ● SG213 Opti Gray 1060-9 ● ● ● SG214 Bankers Gray 1044 TL SG228 Slate 1026 TL SG241 Folkstone Gray 1066-9 SG246 Dolphin Gray SG254 SP402 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 1031 TL ● ● ● ● Ash Gray 1443 TL ● Plum 1383 TL ● ● SP409 Iris 1133 TL ● ● SR505 Navajo Red 1379 TL ● ● ● ST604 Nubian Brown 2715 TL ● ● ● ST613 Tapioca 2542 TL ● ST655 Almond 2514-9 SV704 Boxwood 1619 TL ● SV720 Sage 2614 TL ● SW803 Eggshell White 1578-9 SW806 Carnation White 1460 TL SW811 White 1463-9 SW812 Tawny White 2574 TL SW813 Ice White 1498-9 SW826 Angel White 1474 TL 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Pionite Number 3/4" x .018 Textured SOLID COLORS ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● SW836 Winter White 1449 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION PIONITE ● ● 56631 TL ● ● ● ● 7568 TL ● ● ● ● WM221 Amber Curly Maple 5191 TL ● WM791 Hardrock Maple 6571 TL ● ● ● ● WM951 Honey Maple 56634 TL ● ● ● ● WM971 Sugar Maple 57055 TL ● WO891 Sherwood Oak 6789 TL ● ● ● ● 56572 TL ● ● ● ● HP336 Sunset 56643 TL ● HP359 Thunderstorm 57813 TL PFA48 Sipping Seattle Java 7872 TL ● WA011 Summit Ash 56523 TL ● WB071 Select Butcher Block 56411 TL ● WC411 Yorkshire Cherry 56635 TL WC421 Oiled Cherry WM115 Sugar Maple II 1-5/8" x 3mm 1-5/16" x 3mm ● ● 1-1/8" x .020 Textured ● 58127 TL 15/16" x 3mm ● Wanderer 15/16" x 2mm ● HP272 15/16" x 1mm ● 15/16" x .018 ● Canplast Number 15/16" x .018 Textured ● Color 7/8" x .018 Textured ● Pionite Number 3/4" x .018 Textured 1-5/16" x .020 WOODGRAINS ● WO951 Fine Oak WW971 Gunstock Walnut 6366 TL ● WX031 Pearwood 5214 TL ● WX041 Anigre 56625 TL ● WX421 Witchcraft 56496 TL ● ● ● ● WY031 Formal Mahogany 7423 TL ● ● ● ● 1-5/16" x .020 1-5/16" x 3mm ● ● 39 PIONITE AE021 Graphite Spektrum 9002 TL ● AG251 Gray Spektrum ● 9008 TL 1-5/8" x 3mm 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Pionite Number 3/4" x .018 Textured DESIGNER PATTERNS ● AW785 White Spektrum 9003 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION ROSEBURG-DURAMINE 1-5/16" x .020 1-5/16" x 3mm 1-5/8" x 3mm 1460 TL 1-1/8" x .020 Textured White 15/16" x 3mm 11 15/16" x 2mm 1005-9 15/16" x 1mm Black 15/16" x .018 6 15/16" x .018 Textured Canplast Number ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 16 Almond 2514-9 21 Champagne 2542 TL 22 London Grey 1060-9 26 Grey 1035 TL 44 International White 1463-9 ● ● ● ● ● ● ● ● ● ● 108 Folkstone 1066-9 ● ● ● ● ● ● ● ● ● ● 109 Antique White 1578-9 ● ● ● ● ● ● ● ● ● ● 120 Glacier White 1474 TL ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 200 Ice White 1463-9 ROSEBURG-DURAMINE 53 Solar Oak 54 6708 TL ● ● African Mahogany 55127 TW ● ● 55 Hardrock Maple 56518 TL ● ● ● ● 65 Knotty Pine 57055 TL ● 319 Pacific Maple 55195 TL ● 327 Executive Cherry 56905 TL ● 328 Woodlawn Cherry 7937 TL ● ● ● ● 333 Brentwood Cherry 57225 TL ● ● 334 Cinnamon Maple 57675 TL ● 339 Red Alder 55093 TW ● 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm Canplast Number 15/16" x .018 Color 15/16" x .018 Textured Roseburg Number 7/8" x .018 Textured WOODGRAINS 3/4" x .018 Textured 40 Color 7/8" x .018 Textured Roseburg Number 3/4" x .018 Textured SOLID COLORS ● ● 340 Napa Cherry 58791 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION ROSEBURG-DURAMINE 6571 TL ● 353 Harvest Cherry 58586 TL ● 361 Element Alder 58417 TL ● 363 Castle Oak 58642 TL ● 371 Medium Sycamore 58790 TM ● 391 Cordoba Pine ● 404 Mahogany Impressions 55127 TW ● 405 Serene Cherry 57245 TM ● 406 Black Cherry 56970 TL ● 437 Savannah Cherry 58878 TL ● 477 Fusion Maple 58080 TL ● 641 Swiss Pear 58429 TL ● 659 Vanilla Apple 58610 TL ● 660 Cranberry Apple 58879 TL ● 57657 TL ● ● ● ● ● ● 1-5/8" x 3mm 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm ● 1-5/16" x 3mm Cabinet Maple 1-5/16" x .020 352 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Roseburg Number 3/4" x .018 Textured WOODGRAINS ● ● 661 Caramel Apple 58518 TL ● 663 Chocolate Apple 58513 TL ● 665 Wild Apple 56967 TW ● 667 Brandy Fruitwood 56589 TM ● ● 668 Spiced Fruitwood 57244 TM ● ● 700 Rustic Alder 58726 TL ● 701 American Walnut 58727 TL ● 703 Tuscan Teak 58724 TL ● 704 Tuscan Rosso 58723 TL ● 705 Tuscan Teak Grigio 58722 TL ● 706 Chocolate Cherry 58721 TL ● 707 Jubilee Cherry 58720 TL ● 716 Quartered 58880 TL Caramel Bamboo ● 717 Cioccolato Noce 58881 TL ● ● 41 ● ● ● ● ● ● ● 718 Café Primavera 58882 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION ROSEBURG-DURAMINE 514 Silver Frost 86151 TW ● 554 Copper Polaris 9644 TL ● 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Roseburg Number 3/4" x .018 Textured DESIGNER PATTERNS ● ● 555 Grey Polaris 9637 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. 42 A SURTECO DIVISION TAFISA 15/16" x 1mm 15/16" x 2mm 15/16" x 3mm 1-1/8" x .020 Textured 1-5/16" x .020 1-5/16" x 3mm 1-5/8" x 3mm ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 15/16" x .018 Textured ● Color 7/8" x .018 Textured ● Tafisa Number 3/4" x .018 Textured 15/16" x .018 SOLID COLORS L080 Froth of the Sea 1463-9 ● ● ● L100 Vanilla Orchid 1498-9 ● ● ● L120 Snowbound 1401-9 ● ● ● L175 White 1472 TL L200 Almond 2514-9 ● ● L201 Autumn Shadows 1060-9 ● L202 Summer Drops 1066-9 ● L203 Black 1005-9 ● L204 Ivory 4522 TL ● L228 Slate 1026 TL ● L258 Almondine 1543-9 Canplast Number ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● L297 Butter Biscuit 2514-9 Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. 43 LAMINATE LISTINGS A SURTECO DIVISION TAFISA ● ● L303 Hardrock Maple 7734 TL ● ● ● ● L309 Mahogany 7295 TL ● ● ● ● L363 Fidlar's Maple 7568 TL ● ● ● ● L420 Summer Flame 56643 TL ● ● ● ● L421 Candlelight 58518 TL ● L477 Tuxedo 58754 TW ● L482 Baron Wenge 57657 TL ● L484 Symphony 6642 TL ● 44 L485 Concerto 58727 TL ● ● L486 Opera 56586 TL ● ● ● ● L804 Siena Cherry 58417 TL ● L806 Romano Cherry 6571 TL ● ● ● L807 Brunito Cherry 57656 TL ● ● ● ● ● ● ● ● ● ● 1-5/8" x 3mm 1-5/16" x 3mm ● 1-1/8" x .020 Textured ● 15/16" x 3mm 56523 TL 15/16" x 2mm Red Oak 15/16" x 1mm L302 15/16" x .018 ● Canplast Number 15/16" x .018 Textured Gunstock Walnut 6366 TL Color 7/8" x .018 Textured L300 Tafisa Number 3/4" x .018 Textured 1-5/16" x .020 WOODGRAINS ● ● L821 Scala Cherry 57245 TM Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION WILSONART ● 1-5/8" x 3mm 2547 TL ● 1-5/16" x 3mm Putty 1-5/16" x .020 1503 1-1/8" x .020 Textured ● 15/16" x 3mm ● 15/16" x 2mm 15/16" x 1mm 1035 TL Canplast Number 15/16" x .018 Textured Grey Color 7/8" x .018 Textured 1500 Wilsonart Number 3/4" x .018 Textured 15/16" x .018 SOLID COLORS ● ● ● ● ● ● 1511 Mandarin Red 1393 TL ● 1530 Beige 2545 TL ● ● ● ● ● 1531 Light Beige 2552 TL ● ● ● ● ● 1570 White 1473 TL ● 1572 Antique White 1578 TL 1573 Frosty White 1460 TL 1595 Black 1005 TL D14 Port 1901 TL ● ● ● D25 Atlantis 1154 TL ● ● ● D30 Natural Almond 2514 TL D50 Khaki Brown D72 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 2540 TL ● ● Featherstone 2016 TL ● D79 Hunter Green 1642 TL D90 Northsea 1044 TL D91 Slate Grey D92 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 1026 TL ● ● Dove Grey 1031 TL ● ● D96 Shadow 1037 TL ● D97 Haze 2014 TL ● D307 Hollyberry 1389 TL ● ● D315 Platinum 1071 TL ● ● ● ● ● D321 Brittany Blue 1133 TL ● ● ● ● ● D322 Bluejay 1155 TL ● D327 Pepperdust 1096 TL ● ● ● ● ● D331 Sand 1511 TL ● D341 Marigold 1242 TL ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● D354 Designer White 1474 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. 45 LAMINATE LISTINGS A SURTECO DIVISION WILSONART D379 Indigo 1120 TL ● ● D381 Fashion Grey 2024 TL ● ● D391 Cloud 1199 TL ● D403 White Sand 2584 TL ● D417 Lapis Blue 2128 TL ● D431 Alabaster 2439 TL ● D436 Fleece 1452 TL ● D439 Wallaby 1587 TL ● D456 Cafe Crème 1267 TL ● D478 Amazon 2614 TL ● D482 Black Forest 2617 TL ● 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 15/16" x .018 Textured Canplast Number ● ● ● WILSONART ● 7039 Windsor Mahogany 56619 TL ● ● ● ● 7040A Figured Mahogany 6866 TL ● ● ● ● 7054 Wild Cherry 56967 TL ● ● 7062 Congo Spruce 56625 TL ● 7110T Montana Walnut 56611 TL ● ● ● ● 7122 Empire Walnut 55127 TL ● ● 7209 Nepal Teak 6908 TL ● ● ● ● 1-5/8" x 3mm 1-5/16" x 3mm 58774 TW 1-1/8" x .020 Textured Gold Alchemy 15/16" x 3mm 4861 15/16" x 2mm ● 15/16" x 1mm 58773 TW Canplast Number 15/16" x .018 Silver Alchemy Color 15/16" x .018 Textured 4860 Wilsonart Number 7/8" x .018 Textured 1-5/16" x .020 WOODGRAINS 3/4" x .018 Textured 46 Color 7/8" x .018 Textured Wilsonart Number 3/4" x .018 Textured SOLID COLORS ● ● ● ● 7806 Bannister Oak 6789 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION WILSONART 7816 Solar Oak 6708 TL ● 7850 Beigewood 56525 TL ● 7888 Golden Oak 6789 TL ● 7909 Fusion Maple 7568 TL ● 7911 Manitoba Maple 7734 TL ● 7919 Amber Cherry 58207 TL ● 7921 Tuscan Walnut 55093 TL ● 7922 Brighton Walnut 57759 TL ● 7923 Versailles Anigre 56619 TL 7924 Biltmore Cherry ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 57307 TL ● ● 7925 Monticello Maple 58229 TL ● 7928 Castle Oak 58642 TL ● 7929 Huntington Maple 58178 TL ● 7935 Shaker Cherry ● 7936 Williamsburg Cherry 57809 TW ● 7941 Tan Echo 57810 TW ● 7942 Cocobala 58772 TW ● 7943 Colombian Walnut 56586 TL ● 7945 Xanadu 57813 TW ● 7946 Brazilwood 58771 TL ● 7947 Rio 57822 TW ● 7948 Mambo 57809 TW ● 7949 Asian Night 58754 TW ● 7951 Asian Sun 58768 TL ● 10734 Limber Maple 7568 TL ● ● 10745 Fonthill Pear 58416 TL ● ● 10776 Kensington Maple 58080 TL ● 57656 TL ● 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Wilsonart Number 3/4" x .018 Textured WOODGRAINS ● 47 ● ● ● ● ● ● ● ● ● ● ● ● 10776 Kensington Maple 6571 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. LAMINATE LISTINGS A SURTECO DIVISION WILSONART 48 Almond Leather 9248 TL ● 4142 Grey Glace 9032 TL ● 4166 Pampas 9568 TL ● 4170 Beige Pampas 9573 TL ● 4621 White Nebula 9003 TL ● 4622 Grey Nebula 9008 TL ● 4623 Graphite Nebula 9002 TL ● 4627 Hunter Nebula 9071 TL ● 4630 Cloud Nebula 9011 TL ● 4633 Natural Nebula 9112 TL ● 4651 Navy Legacy 9572 TL ● 4656 Bronze Legacy 9190 TL ● 4669 Natural Tigris 9421 TL ● 4760 Mystique Night 9327 TL ● 4810 Titanium EV 9557 TL ● 4811 Silicon EV 9558 TL ● 4812 Radium EV 9559 TL ● 4813 Nickel EV 9560 TL ● 4816 Gold EV 9563 TL ● 4820 Carbon EV 9567 TL ● 4830 Satin Stainless 86151 TW ● ● 4842 Canyon Zephyr 86115 TL ● ● 4853 Mission Stone 86134 TL ● 4854 Mission Glaze 86120 TL ● 4856 Cloud Zephyr 86143 TL ● 4857 Shadow Zephyr 86142 TL ● 4858 Crisp Zephyr 86148 TL ● 1-5/8" x 3mm 2932 1-5/16" x 3mm Color 1-5/16" x .020 Wilsonart Number 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 15/16" x .018 Textured 7/8" x .018 Textured Canplast Number 3/4" x .018 Textured DESIGNER PATTERNS ● ● 4859 Spiced Zephyr 86144 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. A SURTECO DIVISION WILSONART 4869 Western White 86128 TL ● 4870 Western Tan 86127 TL ● 4871 Western Suede 86129 TL ● 4872 Western Storm 86125 TL ● 4873 Western Bronze 86126 TL ● 4874 Western Hills 86124 TL ● 4875 Western Iron 86123 TL ● 4876 Sheer Mesh 86137 TL ● 4878 Pewter Mesh 86149 TL ● 4879 Steel Mesh 86152 TL ● 4880 Carbon Mesh 86138 TL ● 4881 Copper Mesh 86119 TL ● 4882 Oiled Soapstone 86122 TL ● 4883 Sable Soapstone 86132 TL ● 4884 Flame Soapstone 86135 TL ● 4885 Green Soapstone 86150 TL ● 4886 Pearl Soapstone 86121 TL ● 4887 Tan Soapstone 86133 TL ● 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Textured 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Canplast Number 15/16" x .018 Textured Color 7/8" x .018 Textured Wilsonart Number 3/4" x .018 Textured DESIGNER PATTERNS ● 4888 Rustic Slate 86141 TL Colors will vary under different lighting. Some matches listed represent a close approximation, therefore it is important to verify color prior to order and processing. Warranty for any product deemed defective by Canplast is for replacement product only. 49 Stock Cross Reference A SURTECO DIVISION 50 1401 White 1401 White 1463 White 1463 White 909 S135 Panolam U002 Nevamar S140 KML S405 Funder Folkstone Formica 1066 Flakeboard Black Fog ATC 1005 1060 Arborite Name Canplast # STOCK GENERICS CROSS REFERENCE 107 KMAU002 S6001 S405 U212 961 128 KMD722 S6012 S551 U601 927 955 KMD721 S548 W400 S417 S417 S103 1498 Brite White 1543 Almond 1578 Antique White S463 S110 S445 S122 W100 949 971 KMD701 S7032 W555 7197 SF100 463 KMD716 S7038 A920 920 KMD730 S2037 S411 S7004 S463 2514 Almond 2514 Almond SF200 S556 S402 2514 Almond T225 S445 2514 Almond SF204 A SURTECO DIVISION 15/16” x 3mm ● ● ● ● ● ● ● ● ● 1595 168 SG213 22 L201 805 SG241 108 L202 ● L120 ● ● ● ● L080 ● ● ● L100 ● ● ● SW811 44 200 SW813 810 SW803 109 ST655 16 1572 L297 L200 D30 Canplast # 15/16” x 2mm ● L203 1-5/8” x 3mm 15/16” x 1mm ● 6 1-5/16” x 3mm 15/16” x .018 ● SE101 1-5/16” x .020 15/16" x .018 Text. ● 888 1-1/8” x .020 Text. 7/8" x .018 Text. ● Wilsonart ● Tafisa ● Roseburg ● Pionite ● Panval 3/4” x .018 Text. STOCK GENERICS CROSS REFERENCE ● ● ● ● 1005 ● ● ● 1060 ● ● ● ● ● ● 1066 ● ● ● ● ● ● 1401 ● ● ● ● ● ● ● 1401 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 1498 ● ● ● ● ● ● ● ● 1543 ● ● ● ● ● ● ● ● ● 1463 1463 1578 ● ● ● ● ● ● ● ● ● 2514 ● ● ● ● ● ● ● ● ● 2514 ● ● ● ● ● ● ● ● ● 2514 ● ● ● ● ● ● ● ● ● 2514 51 Stock Cross Reference A SURTECO DIVISION ATC Flakeboard Formica Funder KML Nevamar Panolam 1005 Black S405 S140 U002 909 107 KMAU002 S6001 S405 1026 Slate Grey S508 1031 Dove Grey S406 1035 Grey S431 1037 Shadow 1044 Northsea 1060 Fog 52 Name Canplast # Arborite STOCK SOLIDS CROSS REFERENCE 837 S131 S409 U604 S6003 S431 S2086 928 U212 961 1061 Oyster Grey 929 1065 Surf 923 1066 Folkstone 1067 Black Pearl 1071 Platinum 1096 Pepperdust 1097 Storm S135 U601 927 S6027 128 KMD722 S6012 S551 S495 955 KMD721 S548 S6014 S2069 912 1099 Platinum 1120 Navy Blue S568 969 1125 Spectrum Blue S497 851 1133 Brittany Blue S513 1149 Graphite Blue 1154 Atlantis 1155 Bluejay 1189 Regimental Blue 1199 Cloud 1242 Marigold 1267 Café Crème S451 S565 902 S6023 S3048 S599 S3060 S429 S3023 914 S3016 845 S1027 839 1049 S407 1379 Spectrum Red 1383 Plum 1389 Hollyberry S466 1393 Mandarin Red S498 1401 White 1401 White 1443 Pearl 1449 Smoky White 1452 Antique White 1454 Mission White 1460 Frosty White S550 1463 White S417 S597 W400 S417 934 S568 S7027 T604 932 S557 S7005 933 S103 W100 949 971 KMD701 S7032 S411 A SURTECO DIVISION Panval Pionite Roseburg Tafisa Wilsonart 3/4" x .018 Text. 7/8" x .018 Text. 15/16" x .018 Text. 15/16" x .018 15/16" x 1mm 15/16" x 2mm 15/16" x 3mm 1-1/8" x .020 Text. 1-5/16" x .020 1-5/16" x 3mm 1-5/8" x 3mm Canplast # STOCK SOLIDS CROSS REFERENCE 888 SE101 6 L203 1595 ● ● ● ● ● ● ● ● ● ● ● 1005 SG228 L228 D91 SG246 D92 ● ● ● ● SG210 D96 ● SG214 D90 ● SG213 26 22 L201 ● ● SG208 805 ● 1500 SG203 168 ● SG241 108 L202 ● ● ● ● ● ● ● ● ● 1026 ● ● ● ● ● 1031 ● ● 1035 1037 ● ● ● ● ● ● ● 1044 ● ● 1060 ● 1061 ● 1065 ● ● ● ● ● ● ● 1066 1067 ● SG204 SB007 D315 ● ● ● ● ● 1071 D327 ● ● ● ● ● 1096 D379 SB009 SP409 D321 ● 1097 ● 1099 ● ● ● 1120 ● ● ● 1125 ● ● ● ● ● 1133 1149 ● D25 ● D322 ● 1155 ● 1189 D391 ● 1199 D341 ● D456 ● ● 1154 ● ● ● 1242 1267 SR505 ● ● ● 1379 SP402 ● ● ● 1383 D307 ● ● ● 1389 1511 ● L120 1393 ● ● ● ● ● ● ● ● ● ● 1401 ● ● ● ● ● ● ● ● ● ● 1401 SG254 ● 1443 SW836 ● 1449 ● 1452 D436 ● SW806 11 SW811 44 1573 L080 ● ● ● 1454 ● ● ● ● ● ● ● ● ● ● ● ● ● 1460 ● ● ● 1463 53 Stock Cross Reference A SURTECO DIVISION 54 1463 White 1464 Neutral White 1472 Chalk White 1473 White 1474 Designer White 1498 Brite White 1511 Desert Beige 1543 Almond 1578 Antique White 1582 Beige 958 W300 459 W555 S463 S110 SF100 463 858 913 1619 Hunter Green 1642 Hunter Green 2014 Haze Panolam S645 S7004 899 Pumice Imperial Green S7036 7197 Indian Smoke Port Nevamar S7024 1587 1901 KML 918 1599 1657 Funder Formica Flakeboard ATC Arborite Name Canplast # STOCK SOLIDS CROSS REFERENCE S414 967 S419 966 KMD716 S7038 S463 S2019 S491 S5040 S1015 921 2016 Featherstone 2024 Fashion Grey S548 2035 Gunmetal S434 2062 Fossil Gray 2075 Studio Gray 2128 Lapis Blue 2146 Violine 2439 Alabaster S569 S6024 S6020 86431 S6031 S6037 S3055 2514 Almond 2514 Almond SF200 S556 2514 Almond T225 S445 SF204 2514 Almond 2535 Putty 2540 Khaki Brown 2542 Champagne 2545 Beige 2547 Putty 2552 Light Beige S445 S122 A920 920 KMD730 S2037 S6005 925 S486 2574 Neutra S7025 2574 Neutra S2110 S402 S477 A SURTECO DIVISION 7/8" x .018 Text. 15/16" x .018 Text. 15/16" x .018 15/16" x 1mm 15/16" x 2mm 15/16" x 3mm 1-1/8" x .020 Text. 1-5/16" x .020 1-5/16" x 3mm 1-5/8" x 3mm Canplast # 200 3/4" x .018 Text. Wilsonart Tafisa Roseburg Pionite Panval STOCK SOLIDS CROSS REFERENCE ● ● ● ● ● ● ● ● ● ● ● 1463 L175 SW826 120 SW813 SW803 ● 1472 ● 1473 D354 ● L100 109 1464 1570 ● ● ● ● ● ● ● ● ● D331 810 ● 1572 ● ● ● ● ● ● ● ● ● ● 1498 ● ● ● ● ● ● 1543 ● ● ● ● ● 1511 ● ● ● SV704 1587 ● 1599 SB040 L297 1657 D97 ● D72 D381 D431 16 1642 ● ● D417 D30 L200 1619 ● ● D14 SG211 ST655 ● ● D79 ● ● 1901 ● ● ST613 SW812 21 2014 ● ● ● ● ● ● ● 2016 ● ● ● ● 2024 ● 2035 ● 2062 ● 2075 ● 2128 ● 2146 2439 ● ● ● ● ● ● ● ● ● ● 2514 ● ● ● ● ● ● ● ● ● 2514 2514 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 2514 2535 ● D50 1578 1582 ● D439 1474 ● ● ● ● ● ● 2540 2542 ● 1530 ● ● ● ● ● 2545 1503 ● ● ● ● ● 2547 1531 ● ● ● ● ● 2552 ● 2574 ● 2574 55 Stock Cross Reference A SURTECO DIVISION 56 2584 White Sand 2614 Amazon 2617 Black Forest 460 S2085 2715 Nubian Brown 2738 Foundry S2084 3500 Natural Beige S2063 3542 Spa White S7040 4522 Ivory 4563 Bisque 607 Panolam Nevamar KML Funder Formica Flakeboard ATC Arborite Name Canplast # STOCK SOLIDS CROSS REFERENCE SV720 L204 ● ● ● ● Canplast # 1-5/8" x 3mm 1-5/16" x 3mm 1-5/16" x .020 1-1/8" x .020 Text. 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 15/16" x .018 Text. 7/8" x .018 Text. 3/4" x .018 Text. Wilsonart Tafisa Roseburg Pionite Panval A SURTECO DIVISION STOCK SOLIDS CROSS REFERENCE D403 ● 2584 D478 ● 2614 D482 ● 2715 2617 ● 2738 ● 3500 ● 3542 ● 4522 4563 57 Stock Cross Reference A SURTECO DIVISION Pearwood W290 6366 Windsor Walnut 6571 Natural Birch W403 6642 Winchester Walnut W418 KMW7943 W393 6708 Solar Oak W373 KMW78816 W373 W230 58 Name Panolam 5214 Nevamar WF108 KML W223 Funder Bryan Maple Formica Flakeboard Hardrock Maple I 5191 Arborite 5155 Canplast # ATC STOCK WOODGRAIN CROSS REFERENCE 7012 KMAH1232 WW971 W290 6789 Golden Oak 6789 Golden Oak 346 6866 Figured Mahogany 6908 Nepal Teak 7007 Cherry 7295 Sapelli Mahogany 7423 June Mahogany W372 91354 7500 Hardrock Maple IV 1539 86992 7568 Fusion Maple 7568 Fusion Maple 7734 Manitoba Maple 7872 Crown Cherry 7937 Porto 55039 Light Maple 55093 Red Alder 55127 Mahogany Impression 55127 Mahogany Impression 55147 Wild Cherry 55195 Pacific Maple WM8164 118 D001 W391 W230 7008 KMD738 WS9450 W370 W372 W256 WM8340 692 W201 KMW7911 6929 W8294 H1209 W144 W338 W297 G615 KMD732 H747 W365 563 1531 W287 R55392 Trytoo Savatre W155 R55393 Looks Likatre W163 R55394 Opto Printatre W176 R55395 Appears Likatre W196 R55396 Aimtoo Savatre W200 R55397 Leave Likatre W221 R55398 I Wantoo Savatre W234 R55399 Seems Llikatre W245 R55400 Electo Printatre W333 R55401 Chusto Printatre 55405 Clark W381 213 A SURTECO DIVISION ● 687 971 WM221 WX031 ● L300 352 L806 5191 L484 53 WO891 166 ● ● ● ● ● ● ● ● 7816 ● ● ● 7888 ● ● ● ● 6708 6789 7806 ● ● ● ● 6789 ● ● ● ● 6866 ● ● ● ● 6908 7007 ● L309 WY031 WM115 L363 992 L303 ● ● ● ● ● ● ● ● ● ● 7295 7423 7500 7909 ● ● ● ● ● 7568 10734 ● ● ● ● ● 7568 7911 ● ● ● ● 7734 PFA48 965 6571 6642 ● 7209 421 5214 6366 ● 10776 Canplast # 1-5/16" x 3mm 5155 ● ● WW971 WM791 1-5/16" x .020 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Wilsonart Tafisa Roseburg Pionite Panval STOCK WOODGRAIN CROSS REFERENCE 7872 ● 328 ● 562 ● ● ● 7937 ● 55039 339 7921 ● 55093 404 7122 ● ● 55127 ● ● 55127 54 ● 319 ● ● 55147 ● 55195 ● R55392 ● R55393 ● R55394 ● R55395 ● R55396 ● R55397 ● R55398 ● R55399 ● R55400 ● R55401 ● 55405 59 Stock Cross Reference A SURTECO DIVISION 60 55406 Lewis 214 55407 Magellan 219 55408 Hudson 222 55449 Pinta 225 55450 Columbus 223 55451 Nina 224 55452 Drake 221 55453 Santa Maria 55459 Autumn Wave WF290 55460 Desert Wave WF291 215 55461 Brunette Pinstripe WF116 55462 Burma Cherry WF121 55464 Majestic Walnut WF259 55465 Natural Oak WF283 55466 Silken Maple WF122 55467 Mink Glow WF103 55468 Java Glow WF105 55469 Ash Pinstripe WF118 55470 Verismo WF202 55471 Seria WF203 55472 Baroque WF204 55473 Teresina WF205 55474 Orissa Cherry WF207 55475 Merit Maple WF229 55476 Lucca Cherry WF231 55477 Muscovado Cherry WF238 55478 Contract Mahogany WF242 55479 Macassar Ebony WF258 55480 Manzana WF260 55481 Zebrano WF262 55482 Hard Rock Maple WF275 55489 Buttershnapps WF293 55490 Vanilla Stix WF294 55491 Cocoa Bliss WF295 55492 Mochatini WF296 55493 En Vogue WF297 55494 Cosmo WF298 Panolam Nevamar KML Funder Formica Flakeboard ATC Arborite Name Canplast # STOCK WOODGRAIN CROSS REFERENCE A SURTECO DIVISION Canplast # 1-5/16" x 3mm 1-5/16" x .020 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Wilsonart Tafisa Roseburg Pionite Panval STOCK WOODGRAIN CROSS REFERENCE ● 55406 ● 55407 ● 55408 ● 55449 ● 55450 ● 55451 ● 55452 ● 55453 ● 55459 ● 55460 ● 55461 ● 55462 ● 55464 ● 55465 ● 55466 ● 55467 ● 55468 ● 55469 ● 55470 ● 55471 ● 55472 ● 55473 ● 55474 ● 55475 ● 55476 ● 55477 ● 55478 ● 55479 ● 55480 ● 55481 ● 55482 ● 55489 ● 55490 ● 55491 ● 55492 ● 55493 ● 55494 61 Stock Cross Reference A SURTECO DIVISION 62 WF299 Noci Panaro WF300 55497 Noce Vettore WF301 55498 Talas Cherry WF310 55499 Zhu WF227 56024 Mahogany Impression 56025 Sovereign Cherry 56056 Bordeaux 56329 Imperial Maple 56345 Provencal Maple 56411 Backwoods Cherry H1499 56411 Backwoods Cherry WF107 56414 Arbor Myrtle 56469 Hardrock Maple II 56490 Bavarian Beech 56496 Shadow Oak 56496 Shadow Oak 56499 Port Maple 56500 Cayenne Maple 56518 Suomi Birch 56523 Sliced Red Oak 56524 Riviera Maple 56525 Pale Oak 56528 Limoges Pear 56533 Wild Cherry 56534 Hardrock Maple III 56572 Cabinet Oak 56586 Corporate Walnut 56589 Brandy Fruitwood 56611 Regency Walnut 56618 Ginger Root Maple 56619 Windsor Mahogany 56619 Windsor Mahogany 56625 Congo Spruce 56631 Cherry Birch KML Funder 86114 H664 Panolam Nirvana 55496 Nevamar 55495 Formica Flakeboard ATC Arborite Name Canplast # STOCK WOODGRAIN CROSS REFERENCE WF0001 W156 86641 W258 W689 W263 W688 W268 W412 H1274 WF208 H767 W684 KMW7922 W231 WM5528 A212 557 W229 W230 580 W140 A602 WM8258 1150 W383 W261 371 W194 7288 W8352 H1304 7484 KMD778 56632 Colonial Cherry H770 W289 56634 Honey Maple H1499 W685 A SURTECO DIVISION 55497 ● 55498 ● 55499 ● 56024 56025 ● 56056 ● ● ● 56345 ● 56411 ● 56411 ● ● ● ● ● ● 56414 ● ● ● 56469 56490 ● WX421 56329 ● ● 762 Canplast # ● ● 175 1-5/16" x 3mm 55496 ● WB071 1-5/16" x .020 ● ● 959 15/16" x 3mm 55495 969 L490 15/16" x 2mm ● 204 968 15/16" x 1mm 15/16" x .018 Wilsonart Tafisa Roseburg Pionite Panval STOCK WOODGRAIN CROSS REFERENCE ● ● ● ● 56496 ● ● ● ● 56496 765 ● 56499 766 ● 56500 55 388 ● L302 ● ● 703 7850 832 ● 56518 ● ● ● 56523 ● 56524 ● ● 56528 ● ● ● ● ● 56533 ● ● ● 56534 56572 ● L486 7943 ● 56586 ● ● ● ● ● ● ● 56611 ● ● ● ● 56618 7039 ● ● ● ● 56619 7923 ● ● ● ● 56619 7062 ● 667 ● 7110T WX041 ● 56525 ● 745 ● ● ● WO951 ● WC421 ● WM951 ● 56589 ● 56625 ● ● ● ● ● ● 56631 56632 ● 56634 63 Stock Cross Reference A SURTECO DIVISION 64 56905 Executive Cherry KMAH1222 W8325 7759 WF101 A48 758 H1363 56967 Wild Apple 56970 Black Cherry 57048 Candlelight 57055 Natural Maple 57225 Brentwood Cherry W138 57244 Spiced Fruitwood W417 57245 Serene Cherry 57307 Biltmore Cherry 57458 Chocolate Pear 57599 Grove Myrtle 57600 Lauren Mahogany W414 57602 Gordon Cherry 1541 57603 Bank Alder 57604 Sycamore 57605 Mahogany 57656 Mocha 57657 Espresso 57661 Manhattan W405 W421 W444 372 W295 H723 363 G664 572 WW0013 W687 603 WF206 604 W273 596 W255 573 567 H703 454 W206 498 G661 KMD777 Crossfire 57675 Cinnamon Maple 57759 Kona 57809 Mambo 57809 Mambo 57810 Tan Echo KMW7941 57813 Xanadu KMW7945 57822 Rio 58011 Hardrock Maple H1400 58011 Hardrock Maple HWF200 58027 Cognac 58080 Fusion Maple P258 58127 Nutmeg Cherry W416 58178 Huntington Maple 58207 Amber Cherry Monticello Maple WT0003 W292 437 57664 58229 Panolam Funder Formica Flakeboard ATC W265 W420 Nevamar Select Cherry Summer Flame KML 56635 56643 Arborite Name Canplast # STOCK WOODGRAIN CROSS REFERENCE 381 W254 5904 366 KMAH1425 W425 W359 610 W201 H1417 W336 W236 W272 WF0002 A SURTECO DIVISION 327 178 Canplast # ● ● ● 56635 ● ● ● ● 56643 7054 ● 65 ● 333 ● 668 ● 405 L821 221 L807 391 7935 L482 WX041 334 HP359 477 56970 ● 57048 ● 57055 57225 ● ● ● ● ● 57244 57245 ● 7924 207 56967 ● ● ● WM971 56905 ● 665 406 206 15/16" x 2mm ● 15/16" x 1mm 1-5/16" x 3mm L420 1-5/16" x .020 HP336 15/16" x 3mm WC411 15/16" x .018 Wilsonart Tafisa Roseburg Pionite Panval STOCK WOODGRAIN CROSS REFERENCE ● 57307 ● ● ● 57458 ● ● ● 57599 ● ● 57600 ● ● 57602 ● ● 57603 ● ● 57604 ● 57605 ● ● ● ● ● 57656 ● ● ● 57657 ● ● 57661 ● ● 57664 57675 ● 7922 ● ● 57759 7948 ● 57809 7936 ● 57809 7941 ● 57810 7945 ● 57813 7947 ● 10776 HP272 7929 ● 58011 ● ● 58011 ● 58027 ● 58080 ● 58127 ● 58178 ● 58229 7919 7925 57822 ● 58207 65 Stock Cross Reference A SURTECO DIVISION 66 58331 Fusion Maple 795 58410 Cherrywood 755 58411 Grand Cherry 58416 Nutmeg Cherry 58417 Arbor Myrtle 58418 Wild Apple 58429 Shaker Pear 58429 Shaker Pear 58513 Chocolate Apple 58518 Honey Apple 58535 Summer Flame 58586 Harvest Cherry 58610 Vanilla Apple 58642 Castle Oak 58720 Jubilee Cherry 58721 Chocolate Cherry 58722 Tuscan Teak Grigio 58723 Tuscan Rosso 58724 Tuscan Teak 58726 Rustic Alder 58727 American Walnut W134 7284 557 W682 570 W288 388 H1232 KMD605 703 370 6209 W292 WF100 KMD625 365 KMAH600 WF104 KMW7938 A601 KMW7928 W424 KMAH1465 7739 W305 KMW7110 58768 Asian Sun KMW7951 58771 Brazilwood KMW7946 58772 Cocobala 58773 Silver Alchemy 58774 Gold Alchemy 58779 Candlelight 58790 Medium Sycamore 58791 Napa Cherry 58878 Savannah Cherry Cioccolato Noce 58882 Café Primavera 86162 Autumn 86167 Sienna W190 KMW7946 WF293 KMW7949 58881 W683 W115 Asian Night Cranberry Apple WC2001 364 Lucas Point Cherry Caramel Bamboo W340 W280 58749 58879 Panolam 556 58754 58880 Nevamar W285 7285 W294 W404 KML Funder Formica Flakeboard ATC Arborite Name Canplast # STOCK WOODGRAIN CROSS REFERENCE WF241 WZ0028 P623 D336 W264 KMD621 KMAK600 WO0040 6933 W407 D337 K644 D375 A SURTECO DIVISION 10745 361 L804 641 663 176 661 L421 Canplast # 1-5/16" x 3mm 1-5/16" x .020 15/16" x 3mm 15/16" x 2mm 15/16" x 1mm 15/16" x .018 Wilsonart Tafisa Roseburg Pionite Panval STOCK WOODGRAINS CROSS REFERENCE ● ● 58331 ● ● 58410 ● ● 58411 ● ● 58416 ● ● ● 58417 ● ● ● 58418 ● ● 58429 ● 58429 ● 58513 ● ● ● ● ● 58518 58535 353 ● 58586 659 ● 58610 363 ● 58642 707 ● 58720 706 ● 58721 705 ● 58722 704 ● 58723 703 ● 58724 700 ● 58726 701 7928 L485 ● ● 58727 58749 L477 233 7949 ● 58754 7951 ● 58768 7946 ● 58771 7942 ● 58772 4860 ● 58773 4861 ● ● 58774 ● 58779 371 ● 58790 340 ● 58791 437 ● 58878 660 ● 58879 716 ● 58880 717 ● 58881 718 ● 58882 ● ● 86162 ● ● 86167 67 Stock Cross Reference A SURTECO DIVISION 68 9002 Graphite Nebula 9003 White Nebula 9008 Grey Nebula P885 Panolam Nevamar KML Formica Flakeboard ATC Arborite Name Canplast # STOCK DESIGNER PATTERNS CROSS REFERENCE P895 P886 9011 Cloud Nebula 9015 Storm Gray Matrix P893 9017 Folkstone Grafix 9017 Folkstone Grafix 9023 Graphite 9032 Grey Glace 9061 Charcoal Matrix 9064 Phantom Gray Matrix 9066 Gray Matrix 503 MR6001 9068 Neutra Matrix 506 MR2003 9071 Green Matrix 9096 Blueberry Matrix MR3007 9098 Straw Matrix MR2006 9112 Natural Nebula MR6004 507 MR6005 P890 MR7001 515 M606 692 MR6002 MR6007 MR5001 9124 Navy Grafix P994 9190 Bronze Legacy P231 9248 Almond Leather 9327 Mystique Night 7018 MR3005 7500 9421 Natural Tigris 9557 Titanium EV 9558 Silicon EV 9559 Radium EV 9560 Nickel EV 9563 Gold EV 9567 Carbon EV 9568 Pampas 9572 Navy Legacy 9573 Beige Pampas 9637 Grey Polaris 9644 Copper Polaris 9696 Cardboard Solidz 9806 Stainless 86115 Canyon Zephyr KMW4842 86119 Copper Mesh KMW4881 7813 P623 P894 A SURTECO DIVISION 1-5/16” x 3mm 1-5/16” x .020 9002 AW785 4621 ● 9003 AG251 4622 ● 9008 4630 ● 9011 ● 9015 ● 9017 ● 9017 ● 9023 ● 9032 ● 9061 ● 9064 ● 9066 ● 9068 ● 9071 ● 9096 ● 9098 ● 9112 4142 4627 4633 Canplast # 15/16” x .018 15/16” x 3mm Wilsonart ● Tafisa 4623 Roseburg AE021 Pionite Panval STOCK DESIGNER PATTERNS CROSS REFERENCE ● 9124 4656 ● 9190 2932 ● 9248 4760 ● ● 9327 4669 ● 9421 4810 ● 9557 4811 ● 9558 4812 ● 9559 4813 ● 9560 4816 ● 9563 4820 ● 9567 4166 ● 9568 4651 ● 9572 4170 ● 9573 555 ● 9637 554 ● 9644 ● 9696 ● 9806 961 4842 ● 4881 ● ● 86115 86119 69 Stock Cross Reference A SURTECO DIVISION 70 86120 Mission Glaze 86121 Pearl Soapstone 86122 Oiled Soapstone 86123 Western Iron 86124 Western Hills 86125 Western Storm 86126 Western Bronze 86127 Western Tan 86128 Western White 86129 Western Suede 86132 Sable Soapstone 86133 Tan Soapstone 86134 Mission Stone 86135 Flame Soapstone 86137 Sheer Mesh 86138 Carbon Mesh 86141 Rustic Slate 86142 Shadow Zephyr 86143 Cloud Zephyr 86144 Spiced Zephyr 86148 Crisp Zephyr P238 KMW4853 KMW4880 86149 Pewter Mesh 86150 Green Soapstone 86151 Silver Frost KMAK610 86152 Steel Mesh KMW4879 Panolam Nevamar KML Formica Flakeboard ATC Arborite Name Canplast # STOCK DESIGNER PATTERNS CROSS REFERENCE A SURTECO DIVISION 514 1-5/16” x 3mm 1-5/16” x .020 4854 ● 86120 4886 ● 86121 4882 ● 86122 4875 ● 86123 4874 ● 86124 4872 ● 86125 4873 ● 86126 4870 ● 86127 4869 ● 86128 4871 ● 86129 4883 ● 86132 4887 ● 86133 4853 ● 86134 4884 ● 86135 4876 ● 86137 4880 ● 86138 4888 ● 86141 Canplast # 15/16” x .018 15/16” x 3mm Wilsonart Tafisa Roseburg Pionite Panval STOCK DESIGNER PATTERNS CROSS REFERENCE 4857 ● 86142 4856 ● 86143 4859 ● 86144 4858 ● 86148 4878 ● 86149 4885 ● 86150 4830 ● 4879 ● ● 86151 86152 71 A SURTECO DIVISION 72 PROCESSING INFORMATION PVC EDGEBANDING Poly Vinyl Chloride is the most commonly known and widely used polymer for Edgebanding worldwide. Canplast has gained extensive knowledge and experience with this polymer over the years. MACHINE PROCESSING Canplast PVC Edgebanding can be applied by using any automatic edgebander. It is also recommended for contour edgebanders and automatic workcenters, (BAZ, BIMA, BIESSE Millenium). Cutting, bonding, trimming and scraping, as well as the subsequent application of buffing wheels are possible. PROCESSING CONDITIONS Substrate, adhesive and Edgebanding should be applied at room temperature. The three components should be warmed up for 24 hours before processing, if they are stored in a colder environment. Cold panels or Edgebanding can result in a pre-mature adhesive setup. Evidence of premature set-up would be adhesive bonding well to the substrate but not to the Edgebanding. The optimum wood moisture content of the substrate should be between 7% and 10%. All panel edges should be cut square and clean. RUNNING SPEED For all running speeds, a hotmelt adhesive with an appropriate open time should be selected. Tests should be performed to determine the best overall temperature based on the line speed being run. TYPES OF HOTMELT Commonly available hotmelt Adhesives (EVA, PA, PUR) can be used with Canplast PVC Edgebanding. To achieve a minimal glue line all Canplast Edgebandings are produced with a slight concavity. We recommend the high-quality TOPMELT ™ Adhesives. HOTMELT APPLICATION The Adhesive should be applied evenly and in such quantity that no beads are squeezed out at the edges so that the hollow space between the particles is properly filled. The quantity of glue applied depends on the type and density of the particleboard: the lower the particleboard density the higher the required amount of hotmelt. During bonding, it is important to ensure that there is always an adequate amount of Adhesive in the container, so that only minimum temperature changes occur during Adhesive application. A SURTECO DIVISION GLUE POT TEMPERATURE AND MAINTENANCE Please note that the thermostats in the glue pot may be inaccurate and can display values which deviate sometimes substantially from the actual hot melt temperature. Canplast recommends the glue pot temperature be turned down to approximately 150°C if the edgebander is not going to be used for an extended period of time. This temperature will keep the adhesive molten, allow for a fast heat up, and also prevent unnecessary adhesive breakdown and oxidation. It is also recommended that if the molten adhesive sits in the pot for an extended time, it should be stirred or agitated. Excessive heat will cause the adhesive to break down, creating charring and odors. PRESSURE ROLLERS Ensure that the pressure roller set and the individual rollers are aligned properly to achieve a consistent pressure distribution onto the Edgebanding. Follow the machine manufacturer recommendation regarding supply air pressure. GUILLOTINE CUTTING The guillotine cutting blades should be sharp to ensure a clean cut. END CUTTING The Edgebanding overhang at the ends should be minimal to simplify the subsequent end trimming. The cutting blades should also be sharp to ensure a clean cut. FLUSH OR RADIUS TRIMMING Multi-blade trimmers with 4 - 6 blades and rpm of 12,000 to 18,000 are recommended. SCRAPING The scraper depth should be 0.10 to 0.15mm to avoid excessive stress whitening. Scraper blades must be sharp. POLISHING Lastly, clean buffing wheels should be applied to totally eliminate remaining stress whitening and achieve a clean and polished edge finish. CLEANING It is recommended that Canplast PVC Edgebanding is cleaned with special citrus based cleaners. Environmentally unfriendly substances such as acetones and lacquer thinners containing high concentrations of solvents or alcohol are not recommended and may damage the product. 73 PROCESSING INFORMATION ABS EDGEBANDING WHAT IS ABS? ABS (Acrylonitrile-Butadiene-Styrene) is an environmentally responsible, chlorine-free high-quality polymer. It may be recycled or incinerated with general waste. MACHINE PROCESSING Canplast ABS edgebanding can be applied by using any automatic edgebander. It is also recommended for contour edgebanders and automatic workcenters (BAZ, BIMA, BIESSE Millennium). The set-up of the edgebander for ABS Edgebanding is the same as for PVC Edgebanding. Cutting, bonding, trimming and scraping, as well as subsequent application of buffing wheels are possible. 74 PROCESSING CONDITIONS Substrate, adhesive and edgebanding should be applied at room temperature. All three components should be warmed for at least 24 hours before processing, if they are stored in a colder environment. Cold panels or edgebanding can result in a pre-mature adhesive set-up. Evidence of premature set-up would be Adhesive bonding well to the substrate but not to the Edgebanding. The optimum moisture content of the substrate should be between 7% and 10%. All panel edges should be cut square and clean. RUNNING SPEED For all running speeds, a hot melt adhesive with an appropriate open time should be selected. Tests should be performed to determine the best overall temperature based on the line speed being run. TYPES OF HOT MELT Commonly available hot melt adhesives (EVA, PA, PUR) can be used with Canplast ABS Edgebanding. To achieve a minimal glue line Canplast Edgebandings are produced with a slight concavity. We recommend the high-quality TOPMELT ™ Adhesives. HOT MELT APPLICATION The Adhesive should be applied evenly and in such quantity that no beads are squeezed out at the edges so that the hollow space between the particles is properly filled. The quantity of glue applied depends on the type and density if the particleboard: the lower the particleboard density the higher the required amount of hotmelt. During bonding, it is important to ensure that there is always an adequate amount of Adhesive in the container, so that only minimum temperature changes occur during adhesive application. A SURTECO DIVISION GLUE POT TEMPERATURE AND MAINTENANCE Please note that the thermostats in the glue pot may be inaccurate and can display values which may deviate, sometimes substantially, from the actual hotmelt temperature. Canplast recommends the glue pot temperature be turned down to approximately 150° C if the edgebander is not going to be used for an extended period of time. This temperature will keep the adhesive molten, for a fast heat up, and also prevent unnecessary adhesive breakdown and oxidation. It is also recommended that if the molten Adhesive sits in the pot for an extended time, it should be stirred or agitated. Excessive heat will cause the Adhesive to break down, creating charring and odors. PRESSURE ROLLERS Ensure that the pressure roller set and the individual rollers are aligned properly to achieve a consistent pressure distribution onto the Edgebanding. Follow the machine manufacturer recommendation regarding supply air pressure. CUTTING The guillotine cutting blades should be sharp to ensure a clean cut. END CUTTING The Edgebanding overhang at the ends should be minimal to simplify the subsequent end trimming. The cutting blades should also be sharp to ensure a clean cut. FLUSH OR RADIUS TRIMMING Multi-blade trimmers with 4 - 6 blades and rpm of 12,000 to 18,000 are recommended. SCRAPING The scraper depth should be 0.10 to 0.15mm to avoid excessive stress whitening. Scraper blades must be sharp. POLISHING Clean buffing wheels should be applied to totally eliminate remaining stress whitening and achieve a clean and polished edge finish. CLEANING It is recommended that Canplast ABS Edgebanding is cleaned with special citrus based cleaners. Environmentally unfriendly substances such as acetones and lacquer thinners containing high concentrations of solvents or alcohol are not recommended and may damage the product. PROCESSING INFORMATION KLEAR-VU™ EDGEBANDING A SURTECO DIVISION WHAT IS KLEAR-VU ? Canplast KLEAR-VU Edgebandings are made of highly transparent acrylic. The special three dimensional effect is achieved by applying the finish to the back of the Edgebanding. It has a higher transparency than glass and may be recycled or incinerated with general waste. ™ ™ STRAIGHTLINE MACHINE PROCESSING Canplast KLEAR-VU™ Edgebanding can be processed on any straightline edgebander. Attention has to be paid to the Edgebanding rollers that feed the Edgebanding to the substrate. These rollers need to be rubber coated to avoid damage to the print. CLEANING It is recommended that Canplast KLEAR-VU™ Edgebandings are cleaned with special citrus based cleaners. Environmentally unfriendly substances such as acetones and lacquer thinners containing high concentrations of solvents or alcohol are not recommended and may damage the product. MANUAL PROCESSING Canplast KLEAR-VU™ Edgebanding can also be applied manually. If the Edgebanding is applied without assistance of machinery, the following adhesives are recommended: APPLICATION ON CONTOUR EDGEBANDER AND AUTOMATIC WORKCENTER Canplast recommends to apply KLEAR-VU™ Edgebanding on curved panels manufactured on contour edgebanders or automatic workcenters with an outside radius of at least 200mm (8”) and an inside radius of at least 100mm (4”). • DORUS LD 084 • Jowat Jowacoll 17870 • Fuller Racollit 77 (+ hardener, if necessary) PROCESSING CONDITIONS Substrate, adhesive and Edgebanding should be applied at room temperature. All three components should be warmed for at least 24 hours before processing, if they are stored in a colder environment. Cold panels or edgebanding can result in a pre-mature adhesive set-up. Evidence of premature set-up would be Adhesive bonding well to the substrate but not to the Edgebanding. The optimum moisture content of the substrate should be between 7% and 10%. All panel edges should be cut square and clean. THERMOFORMING THE RADII (MANUAL PROCESSING) Outside radii tighter than 200mm (8”) and inside radii 100mm (4”) can be achieved by heating up KLEAR-VU™ Edgebanding to 100° C to 120° C (212° F to 248° F). While still soft, the Edgebanding is adapted to the substrate shape and held in place. It is necessary to ensure that the material is not drawn. The Edgebanding must be held in shape until it has cooled down. The excess length of the Edgebanding can be trimmed off with a handheld trimmer. If any smear effects occur, it is necessary to adjust the rpm or the direction of the trimmer. Best results are achieved with reverse rotation. Any chatter marks that remain after trimming can be removed with an abrasive paper of 240 to 400 grain. It is recommended to buff the material subsequently with a polishing wheel and a polishing compound for acrylates to achieve the required gloss level. RUNNING SPEED For all running speeds, a hot melt adhesive with an appropriate open time should be selected. Tests should be performed to determine the best overall temperature based on the line speed being run. TYPES OF HOT MELT Commonly available hot melt adhesives (EVA, PA or PUR*) can be used with Canplast KLEAR-VU Edgebanding. To achieve a minimal glue line Canplast edgebandings are produced with a slight concavity. We recommend the high-quality TOPMELT ™ Adhesives. Hotmelts or glues may not contain solvents. Contact adhesives can also be used but may not contain solvents. 75 PACKAGING A SURTECO DIVISION TOPEDGE ™ EDGEBANDING DIMENSION WIDTH 3/4” THICKNESS .018” BOX ROLLS 6 ROLL QUANTITY QUANTITY FT LB BOX SIZE FT LB 3,600 32 16” X 16” X 5” 600 5 7/8” .018” 6 3,600 35 16” X 16” X 5” 600 6 15/16” .018” 6 3,600 38 16” X 16” X 5” 600 6 1-1/8” .020” 4 2,400 33 16” X 16” X 5” 600 8 1-5/16” .020” 4 2,400 41 16” X 16” X 5” 600 8 15/16” .040” (1mm) 6 2,400 55 16” X 16” X 5” 400 9 15/16” .079” (2mm) 5 1,250 57 20” x 20” x 4” 250 11 15/16” .118” (3mm) 3 900 61 30” x 30” x 3” 300 20 1-5/16” .118” (3mm) 2 600 57 30” x 30” x 3” 300 28 1-5/8” .118” (3mm) 1 300 36 30” x 30” x 3” 300 36 KLEAR-VU ™ 76 DIMENSION WIDTH THICKNESS BOX ROLLS QUANTITY FT LB BOX SIZE 15/16” .040” (1mm) 1 492 10 16” X 16” X 5” 15/16” .079” (2mm) 1 246 21 16” X 16” X 5” 1-5/16” .079” (2mm) 1 164 36 16” X 16” X 5” PACKAGING A SURTECO DIVISION EVA HOTMELTS CARTRIDGE ADHESIVE COLOR CASE PACKAGING 2022-20 Natural ● 45 Cartridges per 33 lb case 2022-10 White ● 45 Cartridges per 33 lb case 2022-50 Brown ● 45 Cartridges per 33 lb case 2022-90 Black ● 45 Cartridges per 33 lb case 2026-20 Natural ● 48 Cartridges per 26 lb case 2024 Clear ● 45 Cartridges per 24 lb case ADHESIVE COLOR BAG PACKAGING 2030-20 Natural ● 50 Lb/bag 2031-20 Natural ● 50 Lb/bag 2031-10 White ● 50 Lb/bag 2031-50 Brown ● 50 Lb/bag 2031-90 Black ● 50 Lb/bag 2035-20 Natural ● 50 Lb/bag 2035-10 White ● 50 Lb/bag 2041-20 Natural ● 50 Lb/bag GRANULAR 2041-10 White ● 50 Lb/bag 2050-20 Beige ● 55 Lb/bag 2001-01 Clear ● 45 Lb/bag 2020 Natural ● 55 Lb/bag PRIMER COLOR JUG PACKAGING 1622 White ● 9 Lb /jug PVA ADHESIVES 77 GENERAL TERMS & CONDITIONS A SURTECO DIVISION 78 1. Purchases Controlled By These Terms and Conditions. All sales to Buyer by Surteco USA Inc. and Surteco Canada Ltd. as applicable (Surteco USA Inc. and Surteco Canada Ltd.), shall be made by Surteco USA Inc. and Surteco Canada Ltd. and accepted by Buyer on the provisions of these Terms and Conditions. 2. No Duty To Do Business. Surteco USA Inc. and Surteco Canada Ltd.reserves the right to not do business with Buyer at any time, and for any reason, and assumes no duty to sell to Buyer. 3. Right to Sell or Use Products. Surteco USA Inc. and Surteco Canada Ltd. reserves the right to make, sell and/or compete with Buyer with products similar to, or the same as, products sold to Buyer. 4. Acceptance of Orders. All orders are subject to acceptance and approval by Surteco USA Inc. and Surteco Canada Ltd. 5. Processing of Orders. Surteco USA Inc. and Surteco Canada Ltd.reserves the right to charge Buyer costs incurred from order cancellations or changes, and to consider additions as separate orders. 6. Back-Orders. When Surteco USA Inc. and Surteco Canada Ltd. is unable for any reasons to make a complete shipment of any order, Surteco USA Inc. and Surteco Canada Ltd. reserves the right to make partial shipments and to submit invoices for such partial shipments. Back orders will be filled at prices and terms governing the complete original order. 7. Price Changes. All prices quoted from time to time by Surteco USA Inc. and Surteco Canada Ltd.are subject to change by Surteco USA Inc. and Surteco Canada Ltd.without notice up to time of shipment. 8. Prices Exclude Taxes. Buyer agrees to pay any such taxes applicable to the sale or use of the products or, in lieu thereof, Buyer shall provide Surteco USA Inc. and Surteco Canada Ltd. with a tax exemption certificate acceptable to the relevant taxing authorities. Buyer shall promptly reimburse Surteco USA Inc. and Surteco Canada Ltd. for any tax advanced or paid by Surteco USA Inc. and Surteco Canada Ltd.with respect to such products. 9. Title to Goods. Title to goods passes to Buyer when Surteco USA Inc. and Surteco Canada Ltd. receives full payment, however, risk of loss passes to Buyer at the time of shipment. 10. Shipping. All shipments are FOB (Incoterms 2000) Surteco USA Inc. and Surteco Canada Ltd. Separate charges for shipping and handling will be shown on invoices. 11. Credit Terms. Credit terms are, at the option of Surteco USA Inc. and Surteco Canada Ltd., either COD or net 30, unless otherwise stated in writing by Surteco USA Inc. and Surteco Canada Ltd. Buyer agrees that all invoices unpaid, in whole or in part, within terms will be subject to a service charge of the lesser of 1.5% per month (19.56% per year) or the maximum rate permitted by applicable law. 12. Product Specifications. Surteco USA Inc. and Surteco Canada Ltd.makes and sells products ordered by Buyer subject to reasonable tolerances set by Surteco USA Inc. and Surteco Canada Ltd. from time to time. Surteco USA Inc. and Surteco Canada Ltd.is not in any way liable for reasonable commercial variations in finish, weight and color. No condition, warranty or stipulation is made in respect of color stability of plastics due to solar effects from weather or other atmospheric conditions. Surteco USA Inc. and Surteco Canada Ltd.reserves the right to exceed/miss order quantities for custom production items by plus/minus 10 per cent. 13. Limited Warranty. Products manufactured by Surteco USA Inc. and Surteco Canada Ltd.are warranted to the Buyer to be free of defects in material and workmanship for a period of six (6) months from date of purchase from Surteco USA Inc. and Surteco Canada Ltd. Surteco USA Inc. and Surteco Canada Ltd. sole responsibility and liability and Buyer’s sole and exclusive remedy for any breach of the foregoing limited warranty shall be the repair or replacement of the defective Product or refund of the purchase price at Surteco USA Inc. and Surteco Canada Ltd. option. Products, which are sold by, but not manufactured by, Surteco USA Inc. and Surteco Canada Ltd., are subject to the warranty provided by the manufacturer of said products and are not warranted by Surteco USA Inc. and Surteco Canada Ltd. A SURTECO DIVISION THE LIMITED WARRANTY GIVEN IN THIS SECTION IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS EXPRESSED OR IMPLIED ON THE PART OF SURTECO USA INC. AND SURTECO CANADA LTD. SURTECO USA INC. AND SURTECO CANADA LTD.DISCLAIMS ANY WARRANTY OR CONDITION, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 14. Claims. If Buyer believes there is a defect with products sold by Surteco USA Inc. and Surteco Canada Ltd. to Buyer, Buyer must (i) immediately notify Surteco USA Inc. and Surteco Canada Ltd.of such defect, (ii) cooperate fully with the investigation of the alleged defect, and (iii) comply in full with all shipping and return policies established by Surteco USA Inc. and Surteco Canada Ltd.from time to time. 15. Returns. No merchandise will be accepted by Surteco USA Inc. and Surteco Canada Ltd. as a return unless such return is authorized in writing by Surteco USA Inc. and Surteco Canada Ltd.. 16. Limited Liability. If there exists a defect with any Product sold by Surteco USA Inc. and Surteco Canada Ltd. to Buyer covered by the above limited warranty, Surteco USA Inc. and Surteco Canada Ltd.’s liability shall be limited to repairing or replacing at Surteco USA Inc. and Surteco Canada Ltd.’s option, F.O.B. Surteco USA Inc. and Surteco Canada Ltd.’s factory/warehouses or authorized service station, the defective product in question or at Surteco USA Inc. and Surteco Canada Ltd.’s option refund of the purchase price. Surteco USA Inc. and Surteco Canada Ltd. will not be liable for any costs of removal, installation, transportation, or any other charges, which may arise in connection with a warranty claim. Surteco USA Inc. and Surteco Canada Ltd. will not be liable for damage or wear to products caused by abnormal operating conditions, accident, abuse, misuse, unauthorized alteration or repair, or if the product was not installed in accordance with Surteco USA Inc. and Surteco Canada Ltd.’s printed installation and operating instructions. Buyer’s sole and exclusive remedy pursuant to any claim of any kind, including but not limited to any warranty obligations, express or implied, or a claim in contract, negligence or strict, liability, against Surteco USA Inc. and Surteco Canada Ltd.or any of Surteco USA Inc. and Surteco Canada Ltd.’s affiliates, shall be limited to the limited liability of Surteco USA Inc. and Surteco Canada Ltd.to repair, replace or refund the purchase price described in this section. Surteco USA Inc. and Surteco Canada Ltd.shall not be held responsible for damage to person or property, any consequential loss, special damage, loss of profit, losses on goods in store or the like, irrespective of the cause, including causes which arise out of or connected with these terms and conditions or from the performance or breach of the terms hereof, or from the design, manufacture, sales, delivery, resale, installation, technical direction of installation, inspection, repair, operation or use of any product or part thereof covered by these terms and conditions or sold to Buyer by Surteco USA Inc. and Surteco Canada Ltd. 17. Indemnity. Buyer agrees to indemnify Surteco USA Inc. and Surteco Canada Ltd. (including without limitation its directors, officers, employees, agents and contractors) from liability for damage to persons or property resulting from the use of product in manufacturing processes, or in combination with other substances, or otherwise. Buyer represents to Surteco USA Inc. and Surteco Canada Ltd. that it has used its own independent skill and expertise in connection with the selection and use of the product, and that it possesses skill and expertise in handling, storage, transportation, treatment, use and disposal of the product. 18. Time Frame for Bringing Action. Any action for breach of warranty, condition or defect must be commenced within one (1) year of date of delivery. 19. Intellectual Property. Buyer agrees not to appropriate, copy, use or disclose to third parties any of Surteco USA Inc. and Surteco Canada Ltd.’s proprietary trade secrets, such as plans, specifications, drawings, samples, tools, dies, models or manuals. Buyer shall not file for patent, trademark, service mark or copyright protection for any of Surteco USA Inc. and Surteco Canada Ltd.’s products. 20. Future Documents. These terms and conditions contain the entire provisions governing the purchase of products by Buyer from Surteco USA Inc. and Surteco Canada Ltd. Any additional, different, or inconsistent term or condition contained in any form of purchase order, notice, acceptance, or confirmation used by Buyer or submitted by Buyer to Surteco USA Inc. and Surteco Canada Ltd. in connection with the purchase of any materials from Surteco USA Inc. and Surteco Canada Ltd. will be of no force or effect whatsoever and these terms and conditions shall govern the sale of goods sold to buyer notwithstanding that a purchase order or a document used in a sale contains terms in contradiction of these terms and conditions. These terms and conditions may be amended or modified only by a 79 GENERAL TERMS & CONDITIONS A SURTECO DIVISION written instrument separately signed by Buyer and Surteco USA Inc. and Surteco Canada Ltd. No agent, salesman, or distributor has any authority to obligate Surteco USA Inc. and Surteco Canada Ltd. by any terms, stipulations or conditions not herein expressed. 21. Binding Upon Successors and Assigns. These Terms and Conditions shall be binding upon any successor or assign, by merger, acquisition or otherwise, of Buyer. 22. Governing Law. With respect to Surteco USA Inc. these Terms and Conditions must be governed by and construed in accordance with the laws of the State of North Carolina (without regard to conflicts of law principals). Any suit relating hereto, with respect to Surteco USA Inc. must be filed in the courts in the State of North Carolina, USA. With respect to Surteco Canada Ltd. these Terms and Conditions shall be governed by and construed in accordance with the laws of the Province of Ontario. Any suit relating hereto, with respect to Surteco Canada Ltd. shall be filed in the courts in the Province of Ontario, Canada. 23. Waiver. If, on any occasion, Surteco USA Inc. and Surteco Canada Ltd.waives any term or condition, this waiver is not to be construed as a continuing waiver and any waiver by Surteco USA Inc. and Surteco Canada Ltd. must be in writing, signed by an authorized officer of Surteco USA Inc. and Surteco Canada Ltd. 24. Force Majeure. All orders are accepted subject to delays in delivery caused by fires, floods, accidents, embargoes, labor disputes, failure of suppliers to deliver goods, material shortages or any other contingencies beyond the control of Surteco USA Inc. and Surteco Canada Ltd.. 25. Severability. If any provision of these Terms and Conditions or the application thereof to any person or circumstance is held invalid to any extent, then the remainder of the Terms and Conditions or the application of such provision to persons or circumstances other than those as to which it is held invalid shall not be affected thereby, and each provision of these Terms and Conditions shall be valid and enforced to the fullest extent permitted by law. 26. Headings. The headings for each paragraph are for convenience of reference only and shall not be deemed a part of these Terms and Conditions. 27. Attorney Fees. In the event of any controversy or claim with respect hereto, the prevailing party will be entitled to recover its reasonable attorneys’ fees and costs, whether suit or other proceeding is commenced or not, and whether in mediation, arbitration, at trial, on appeal, in administrative proceedings or in bankruptcy (including without limitation any adversary proceeding or contested matter in any bankruptcy case). 80 Surteco USA Inc. 7104 Cessna Drive Greensboro, NC 27409 USA P: F: W: E: 336-668-9555 336-668-7795 www.canplast.com [email protected] A SURTECO DIVISION