RET0822 White Knighs of the Round Table project Sheets_S2.indd

VISUAL CONTRAST PROJECT SHEET
TAMARA MAYNES, Stylist
‘I love upcycling! Inspiration can come from anywhere. I get really excited when I
see a piece of furniture that I can take to another place’
BEFORE
AFTER
Equipment List
Table and 4 cork top stools (Tamara used Ikea’s Docksta table and Sinnerlig cork stools) ,Scissors, White Knight Squirts Undercoat, Sheet of circular
glass, Stencil, Orbital sander (optional), Extra fine grit sand paper, Repositionable Spray Adhesive, White Knight Squirts in Satin Black, Painters tape in
two widths, String, White Knight Splashes in Satin Black, Drop sheet/newspaper, Stencil brush
White Knight Crystal Clear Acrylic (optional)
Preparation
1.
Clean the surfaces of your
table and chairs to ensure
they are free from dirt and
any other contaminants.
2.
Lightly sand the table
top.
3.
Cover all surrounding areas
to protect from overspray.
3.
Apply White Knight Squirts
Undercoat to the entire table
top, using a smooth sweeping
motion, overlapping each
spray pass.Allow to dry.
4.
Apply White Knight Squirts
aerosol paint in Satin Black
to the entire table top, again
using a smooth sweeping
motion, overlapping each
spray pass and holding the
can approx. 25cm from the
surface. Allow to dry.
5.
Once the paint is completely
dry, carefully peel the painter’s
tape off to reveal your design
6.
For added protection, place a
sheet of glass measuring the
same diameter as the table
top over the finished design.
Table
1.
2.
To mark out your design,
use string to achieve
straight, even lines.
Apply painter’s tape
to create the pattern,
remembering that the
areas you block out will
remain unpainted.
from the makers of
VISUAL CONTRAST PROJECT SHEET
Stools
1.
Block out any areas of the
stencil with tape that you
don’t want to include in the
finished design.
Tamara’s Top Tips
2.
Turn the stencil over and
lightly coat the back with
repositionable spray
adhesive.
3.
Position the stencil on the
top of the stool right side up
and press to adhere.
4.
Dip a stencil brush into
White Knight Splashes
paint in Satin Black and
rub the tip on a rag in a
circular motion to remove
excess paint.
5.
Gently rub the brush over
the cut out areas of the
stencil in a circular motion
to fill in the cut our areas.
Allow to dry.
6.
Once completely dry,
carefully peel the stencil
off the stool to reveal the
design.
7.
Apply a coat of White
Knight Crystal Clear
Acrylic to add protection.
8.
Repeat on each stool.
White Knight Paints
•
To create crisp geometric lines use specialised painters
tape with a sharp edge lock.
•
Adding a sheet of clear glass to the finished table top
is the perfect way to keep your painted design looking
sharp while adding an extra touch of modernity.
@whiteknightpaints
White Knight Paints
Share your projects with us on
#wkroundtable #whiteknightpaints
from the makers of