800-518-8281 VW / Audi Timing Tools

VW / Audi
Timing Tools
2.0L TSFi, and FSi Timing Kit
2.5L I5, 3.2L V6 Timing Kit
#BT40070KIT
#BT10252KIT
Use to setup timing on the 2.0L FSi, TFSi
VW/Audi engines. Kit includes T10252,
T40080, T10115, T10020, T10068A,
T40011
1999-2008 TDi Timing Kit
Use to set timing on 3.2 V6 and 2.5 5 cyl.
Timing Kit Also 4.2 V8 BNS. Kit contains
T40069, T40070, T10172, T03006, T40071,
3212 includes case
AUDI 3.0L- AVK, BBK
#T40030KIT
#B9580
Kit contains all tools necessary to setup and
time both 4 cylinder VW TDi, and Pumpe
Duse engines from 1998-2008
Tools: T10098A, T10020, T10050, T10100,
T40011, 3387, 3359 Includes case
Audi A4, A6 2002-2005 3.0L AVK, BGN
Camshaft adjustment Gauge Set, TDC pin, and
Cam pulley socket. Locks the cams, and crankshaft during timing belt replacement.
Includes: T40026, T40028, T40030, & Case
800-518-8281
www.baumtools.com
VW / Audi
Timing Tools
Twin Camshaft Holder V6
#3391 - Audi A4, A6, VW Passat V6 5 Valve
1998-2005 Engines: AHA, ATQ, APB & BEL
Use with #3242
Twin Camshaft Holder V6
Twin Camshaft Holder V8
#T40005 - Camshaft Holder - 8/99 - 2008
Audi A6, A8 Engines AKB, AUX, AYS, ART, AWN,
BBD, BCY & BFM 1998-2003
Use with #T40011 and #3242
#3242 Holds crankshaft at TDC
(top dead center) when removing
and installing toothed timing belt
or flywheel/drive plate.
#T40011 - Tensioner Lock Pin
#3243 - Audi 90, A4, A6 1992-97 Engine: AFC
Use to align camshafts at TDC during timing
belt changes or cylinder head reassembly. Use
with #T10060A and #3242.
Use to lock belt tensioner on non
adjustable types.
Engines: AHA, AKB, APH, ART, ATQ,
AUG, AUX, AVK, AWD, AWM, AWN,
AWP, AWV, AWW, AYS, BBD, BCY,
BDP, BKF, BNU, BSB
Gas & Diesel Locking Kit
#T10098A - Camshaft Bar (Diesel)
Used for locking camshaft without
removing cylinder head cover.
Used on ALH engine.
#3418- Camshaft Setting Gauge (Diesel)
Use to adjust the position
of the camshaft when setting injection pump timing
or when reassembling
cylinder head.
VW Engine: ALH
#3359- Diesel Pump Pin
Use to test ECO and TDI
diesel pump timing on engines with a divided pump
gear.
VW Engines: AAZ, ALH, BEW,
BHW 10/94 and later.
#T10020- Belt Tension Pin Wrench
Use to adjust belt tension on 1.9 diesel
and 2.0L gas engines 2/98-2003.
VW Engines: AEG, AVH, AZG, ALH,
BDC
#AS4740
Comprehensive kit for locking pumps, cams
and pulleys during belt tensioning or adjusting
and aids in setting timing. Includes: #2064,
#2065A, #3359, #3366, #T10098A, #T10092,
#T40011, T10020 & #V159.
800-518-8281
www.baumtools.com
VW / Audi
Timing Tools
#3268 - Camshaft Alignment Plate
Aligns camshafts to proper position
during assembly and adjustment.
VW - Passat
Engines: AAA, AES & AFP
#T10069- Vibration Damper Holder Wrench
Used to counter hold vibration
damper when loosening the
tightening damper nut
Engines: BDF, BDP, BJS,
BSB
#T10068A - Camshaft Setting Gauge
Use to set the camshaft position relative to TDC when
reassembling the cylinder head.
#BT10020KIT -Belt Tensioner Lock Pin Kit
Use this kit to adjust and lock various VW/Audi
tensioners. Kit includes T10020, 3389, V159,
T10060A, T40011, T10115
Pump Duese Diesel
Timing Tool Kit
VW -Golf, Jetta, GTI, Passat
2002-2005
Audi - A8
Engines: BDF, BDP, BJS, BSB
#3199 - Camshaft Locating Fixture
Use to position camshaft during reassembly
to insure correct timing position. Use with
3204, V159, 3197 and 3211.
Audi V8 2/89-4/96
Engines ABH & PT
#3341 - Camshaft Locating Fixture
5/97-7/99
Locates camshaft position when adjusting timing belts or
rebuilding cylinder head.
Audi A8
Engines ABZ & AEW
#3366 Cam Chain Tensioner Retainer
#AS4840
Audi: A2,A3,A4,A6,Cabriolet Seat: Arosa,Ibiza,
Cordoba, Leon, Toledo, Alhambra, Altea
Skoda: Fabia, Octa-via, Superb Volkswagen:
Lupo, Polo,Fox,Golf,Borra, Jetta,Golf Plus,
Passat, Beetle, Touran,Sharan, Caddy,
Transporter
Engines: 1.2Tdi,1.4Tdi,1.9Tdi,2.0Tdi PD Diesel
Use to hold the chain and tensioner
in position during assembly and
disassembly. 5 valve engines
AUDI - AEB, AHA, AKB, AMB, AMU,
APB, ART, ATC, ATQ, ATW, AUX,
AWM, AWN, AWP, AYS, BBD, BCY,
BEA, BEL, BFM
VW - AAA, AEB, AHA, APH, ATW,
ATQ, AUG, AWM, AWP, AWV, BKF,
BNU
800-518-8281
www.baumtools.com
VW / Audi
Under Hood
Camshaft Sprocket Puller
Belt Tension Tester
Universal application
identifies proper belt
tension. Allows testing
of belts to determine
whether replacement is
necessary or new belt
tension is correct.
#AS4395A
#T40001
#AS4394 - Universal
Cam holding tool
Perfect for holding
cam while inserting or
removing locking pins.
Use this special puller to remove the camshaft
sprockets on a variety of VW and Audi camshafts.
Includes 17mm and 23mm pulling arms. Replaces
#3032.
VW & Audi Engines: AEB, AHA, AKB, ALH, APB,
APH, ART, ATC, ATQ, ATW, AUM, AUX, AUG,
AWD, AWM, AWN, AWP, AWV, AWW, AYS, BBD,
BCY, BFM
SEAL INSTALLERS
SEAL PULLERS
Cam Seal Installer Kit - #3241
Use to install seal(s) into camshaft on
models 1991 and newer.
Pulley Seal Installer. - #3202
Installs front crankshaft pulley seal.
VW Passat, Audi A4, A6, A8
Engines: AAH, AFC, AHA, ATQ, AVK, APB,
ABZ, AEW
Oil Seal Driver - #10-203
Installs crankshaft pulley, camshaft intermediate shaft oil seals. 4 piece set.
VW & Audi Engines 1982 and newer.
Oil Seal Driver - #T10053
Guide sleeve and compression
sleeve for install-ing the crankshaft
sealing ring. Used on diesel engines
with pump injector.
Seal Puller 35mm Long Body - #3240
Removes left and right front camshaft oil
seals. Use with 2085/1 to remove left rear
camshaft seal.
VW VR6, Audi V6
Seal Puller 35mm - #3203
Removes front crankshaft (pulley) seal at the
vibration damper. See seal installer 3202 and
2003/3.
VW & Audi late models.
Seal Puller 32mm - #2085
Removes crankshaft (early), camshaft and
cam position sensor seals. Use with 10-203,
3202, 3203, 3240, 3241 & T10071.
VW & Audi - All engines except diesel.
Seal Puller - #T40019 Used when
replacing crankshaft oil seal. V8
engines
800-518-8281
www.baumtools.com
VW / Audi
Under Hood
#3312 - Viscosity Fan Wrench
Use to loosen and tighten viscosity fan clutch.
AUDI - A4, A6, A8
VW - Passat
Engines: AHA, ATQ,AKB, AUX,
AFC, AYS, AEW,
APB, AVK, ART, AWN
Ribbed Belt Tensioning Wrench - #3299
Use to hold V belt tension when removing and installing
V-belt.
Viscosity Fan Spanner - #3212
Use to remove and install the viscous clutch
on radiator fan and central hydraulic pump
pulley.
AUDI - A4, A6, A8
VW - Passat
Engines: AHA, ATQ, AKB, AUX, AYS, AEW,
APB, AVK, ART, AWN, BCY, BFM, BKH, BGN
VW Coil Clip Kit
VW - Golf, Jetta, GTI, T4 1991-1999
Audi - A4, A6
Engines: 1Z, AAB, AAZ, AAF, ABA,
ACC, ACU, ACV, AHU, AVK, BGN
#3299/1 Ribbed Belt Release Tool End
Removes and installs ribbed belts on the
generator. Use with 3299 for AVK, and
BGN 3.0L V6 engines
Support Sleeves & Pin Set
#AS4741
#AS4990
Removable heads
#VAG-CPK
Ignition Coil Removal 1.2 to 6.0 engines
• For Direct Ignition (final output stage) - Coil on
Plug applications
• 4x Inter-changeable heads (AS4990) covering
huge range of VAG engines in one kit.
• Using right tool AVOIDS DAMAGE to plastic coil head
• Kit (AS4990) includes special LOCKING
MECHANISM DEPRESSOR Tool
Use to support front end when in service
mode removing
or installing the lock carrier on the hood.
Includes #3369 & #3411.
Oil Service Tool Kit
#B1407
Includes:
27mm
32mm
36mm
32mm Passat, Audi (VAG recommends a strap filter
remover) VW 1.8, 1.9TDi, 2.0 & 2.5L Use #3417
“Freewheel” Pulley Kit
#AS4955 - Specialized kit of sockets and adaptors required to remove and install
“freewheel” alternators on Bosch, Valeo, Magneti Marelli, Denso, and more. Kit includes M10XZN, T50, and M8 Hex, plus adaptors required to locate pulley.
800-518-8281
www.baumtools.com
VW / Audi
Diagnostics / Torque
The Terminator Super Logic Probe
Torque Wrenches
For Timing and Belt Replacement
#ST730/5 (VAG1331) - TORQUE
WRENCH 6-50Nm Inserts 9X12mm
#ST730/20 (VAG1332) - TORQUE
WRENCH 40-200Nm Inserts 14X18mm
#ST730/2 (VAG1410) - TORQUE
WRENCH 4-20Nm Inserts 9X12mm
These torque wrenches are essential for proper belt tensioning,
timing and engine assembly.
#ST725QR-4 Reversible
Ratchet insert 9x12 1/4” Dr.
#BT7205J
The Terminator is a superior Logic probe
combining the features of a DMM and
oscilloscope but simplifying the display
for technicians that want to find the pulse
but don’t need the to see the trace.
#ST735-5 Reversible
Ratchet insert 9x12 3/8” Dr.
#ST735-20 Reversible
Ratchet insert 14x18 1/2” Dr.
Transmission Filling Kit
Kit Contents:
Pump Assembly
Nut and Ferrules
VW/Audi Straight Adapter
VW/Audi Short Adapter
VW/Audi Long Adapter
VW/Audi CVT Adapter
VW/Audi DSG Adapter
722.9 Mercedes Benz Adapter
Ford Transmission Adapter
Universal Adapter
#B1924
800-518-8281
www.baumtools.com
VW / Audi
Under Car
Spring Compressor Kit
Wheel Bearing Master Kit
#1117J
Compresses all types of MacPherson style coil
springs front and rear. Includes three sets of
jaws (2) for 75-110mm, 110-140mm and
140-190mm springs found in most vehicles with
Macpherson struts. Not designed for use with
impact wrench.
HALDEX CLUTCH FILTER WRENCH
#B90K
Used to remove and install front and
rear wheel bearings on most vehicles.
AXLE & HUB REMOVER
#T10066
Used when detaching & tightening the oil filter of the
haldex clutch on the rear end.
WHEEL HUB BOLT SOCKET
XZN SOCKET 18mm #T10162
Used for removing and installing the
wheel bearing/wheel hub unit, rear
axle.
#B234MASTER
BELL HOUSING SOCKET
#T10099
Used for removing/installing bolts
from engine to gearbox. 09A/09B
5-speed automatic gear-box. Used
for removing/installing connecting
link. Used when removing and
installing drive axle
Hydraulically driven, this kit quickly pushes
the axle out of the hub, and removes the
hub. Hydraulic pump not included
800-518-8281
www.baumtools.com
To Work On All Of These Cars..
EUROPEAN CARS
AMERICAN CARS
GM, FORD, CHRYSLER
BMW
MERCEDES BENZ
VOLKSWAGEN
AUDI
VOLVO
SPRINTER
SMART
LAND ROVER
JAGUAR
OBDII AND EOBDII
COMPLIANT
2 YEARS OF
FREE UPGRADES
ASIAN CARS
TOYOTA/ LEXUS
HONDA/ACURA
NISSAN/ INFINITI
MITSUBUSHI
MAZDA
SUBARU
HYUNDAI
KIA
SUZUKI
ISUZU
DAIHATSU
DAEWOO
You WILL Need one Of These
#DS2020 complete Scan Tool
with 4 channel lab scope
#DS2021
Complete Scan Tool
Now get high end German and Swedish proprietary coverage
with deep Asian and Domestic
ALL IN ONE MODULE
Comes with complete International coverage
Technical Support
• Free hardware Start-up Support available by phone 8:00am-6:00pm EST
• Advanced Technical Help of German and Swedish auto repair. Pay as you go by phone
• European car specific professional support group. Almost exclusively European specialists
• Help is just a phone call away.
800-848-6657
See more @ www.baumtools.com