Polaris Mowers Flyer 2010.indd

POLARIS 52” (132CM) TOW-BEHIND
ROUGH CUT MOWER
CUT
PART # 2856673 | ELECTRIC START
• Powerful Briggs & Stratton Intek 18.5 HP engine with
electric start
• 52” (132cm) cutting deck constructed of 1/8” heavy gauge
steel, blades and stump jumper mount to heavy duty 3/16”
center deck section
• Twin heavy-duty hardened steel swinging blades cut tree
stems up to 3” in diameter
• Heavy-duty cast blade spindle housing
• 4-wheel in-set design to handle the roughest terrain,
allowing you to get closer to fences and buildings while
mowing
• Heavy-duty ball bearings in front casters and wheels
• Rear discharge for easy cleanout
• Remote console includes throttle control, ignition and PTO
switch and mounts to most tow vehicles; flexible conduit
allows user to choose location
• Cutting height adjustment - range of 3.5” to 6.5”
• Electric clutch with built-in brake for easy engage/
disengagement of blades
• 13” x 5” x 6” puncture resistant tyres to handle the
roughest terrain
• 2” ball hitch coupler
• Battery sold seperately (Part #4140006)
MOWING
TIME
Polaris Industries Australia
1300 654 142 | www.polarisindustries.com.au
Polaris Industries New Zealand
0800 440 290 | www.polarisindustries.co.nz
Polaris mowers are designed and manufactured by Swisher ®
POLARIS MOWERS
Briggs and Stratton® is a registered trademark of
Briggs and Stratton Corporation.
Mounted behind your Polaris ATV, a quality
Pure Polaris mower greatly reduces mowing time
and leaves your property looking great.
Some models cut stems up to 5 cm in diameter.
All feature powerful Briggs & Stratton® engines.
POLARIS 44” (112CM) FINISH CUT
TRAIL MOWER
POLARIS 60” (152CM) FINISH CUT
TRAIL MOWER
POLARIS 44” (112CM) TOW-BEHIND
ROUGH CUT MOWER
PART # 2856668
PART # 2856670
PART # 2856672 | ELECTRIC START
PART # 2856671 | RECOIL START
Our Finish Cut Mowers can be offset behind
your ATV/UTV or ride on mower to greatly
increase your cutting width, decreasing your
cutting time.
If you have a big mowing job you need a Polaris
Finish Cut Mower.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FOR FINISH CUT APPLICATION
Twin blades provide finish cut quality
44” (112cm) cutting deck
Convenient single-point cutting height adjustment
Easy left-to-right offset hitch for mowing ditches or under
low-hanging trees
Standard model comes with a 11.5 HP Briggs & Stratton
I/C OHV engine
Recoil Start
Adjusts easily to match ride on mower cutting height
Exclusive bumper/roller system protects against damage to
trees and shrubs
Anti-scalp rollers
Rugged steel construction
Universal articulating hitch
Wide tires decrease rutting, increase stability
Optional remote blade engagement with lock-out system
(Part 4607)
• Welded deck constructed of 11 gauge steel
• Unit weight : 170 kg
• Also available 50” Cut (Part #2856669)
NOTHING RIDES LIKE A
Designed to dramatically reduce mowing time, Finish Cut
Mowers attach to your ATV, ride on mower or other utility
vehicle and are the ultimate time-savers for large lawns
and paddocks with grass up to 6” (15cm) in height.
•
•
•
•
•
•
•
•
•
•
•
•
•
FOR FINISH CUT APPLICATION
Three blades provide finish-cut quality
60” (152cm) side discharge cutting deck
Standard model includes a powerful 14.5 HP
Briggs & Stratton I/C OHV engine
Easy offset adjustment for mowing ditches
(up to a 15 degree slope) or under low-hanging trees
True floating deck reduces scalping
Easy variable cutting height adjustment handles
Electric 12-volt key starter
Convenient operating blade engage/disengage controls
Exclusive bumper/roller system protects against damage
to trees and shrubs
Operator presence lock-out for safety
Universal articulating hitch
Large 2-gallon (7.5l) fuel tank
• Welded deck constructed of 11 gauge steel
• Unit weight : 226 kg
• Battery sold separately (Part #4140006)
Clear a trail or a paddock year-round with this
tough, dependable workhorse.
Tired of overgrown ditches, fence lines and paddocks?
Hitch a Rough Cut Mower to your ATV or Ride On and clear
the most rugged overgrown areas with ease.
• For brush cutting applications
• Powerful 14.5 HP Briggs & Stratton I/C OHV engine
(42” Electric)
• 12.5 HP Briggs & Stratton I/C OHV engine (42” Recoil)
• Cuts most woody materials up to 1-1/2” (5cm) in diameter
• Rugged 1/8” reinforced steel construction
• Two heavy-duty swinging blades
• Convenient single-point cutting height adjustment
• Rear discharge
• Remote engagement blade brake for safety
• Universal articulating hitch
• Easy adjustable left-to-right hitch enables you to cut to the
left, right or directly behind your ATV or Ride On
•
•
•
•
Welded deck constructed of 11 gauge steel
Overall dimensions : 60” (152cm) wide x 53” (135cm) long
Approximate Unit weight : 249 kg
Battery sold separately (Part #4140006)