Ultralite and Basic Mdf - EL and EL Wood Products

Transcription

STANDARD MOULDINGS :: ULTRALITE & BASIC MDF
Ultralite and Basic Mdf
The Number One Choice for Paint Grade Architectural Millwork :: ULTRALITE & BASIC MDF
STANDARD MOULDINGS
Ultralite & Basic Mdf
U
ltralight MDF and Basic MDF
(Medium Density Fiberboard)
are paint grade products that provide
wonderful architectural profiles at amazingly
affordable prices.
Choose Image to be Placed Here
U
ltralight MDF Mouldings are imported from
South America. The wood fibers, along with
the addition of resin, combine to produce an
ultra lightweight MDF—similar to the weight of
Pine. While typical MDF mouldings are much
heavier in weight and when installed can
“volcano” or pucker around nails, Ultralight MDF
mouldings nail more like pine mouldings. The
combination of light weight and better nailing
makes Ultralight MDF mouldings an ideal choice.
Produced domestically, Basic MDF has helped in
replacing Finger Joint Pine as the only
reasonably priced paint grade product of choice.
Ultralight and Basic MDF are the mouldings of
choice for multi-million dollar homes, as well as
entry to high-end tract housing. MDF is ideal for
any home or office to improve on typical
mouldings without adding increased costs.
W
ith costs less than Finger Joint Pine,
Ultralight and Basic MDF are preprimed,
have no joints, does not crack, split, twist or
warp and never has raised or inconsistent grain.
SECTION CONTENTS
Base ........................................107
Bed Mold ................................126
Built-ups ..................................156
Casing ......................................99
Chair Rail ................................152
Cleat ......................................154
Crown and Cornice ..................126
Flat Astragal / Panel Mould ......154
Hook ......................................154
Points of Distinction
elandelwoodproducts.com
Long Lengths Standard
Panel Cap ................................153
Primed Wall Cap ......................155
S4S ........................................155
Shelving ..................................155
Stop ........................................107
Wainscot and Base ..................153
Window Stool ..........................154
All Styles In-stock
Pre-primed
No Defects
–– 1-5/8
TO
2-1/4 ––
CASING
Lengths Available: 7’ & 17’
120MUL
5/8 x 1-5/8 Flat Bevel Casing
9/16 x 2-1/4 2RE Casing
107MBB
107MUL
9/16 x 1-5/8 711 Casing
9/16 x 1-5/8 711 Casing
121MBB
9/16 x 2 Clamshell Casing
:: ULTRALITE & BASIC MDF
102MBB
STANDARD MOULDINGS
MUL = Ultralite MDF
MBB = Standard to Lightweight MDF
99
132MUL
11/16 x 2-7/16 Palisade Casing
152M MDF 356 CSG
152MBB
152MUL
5/8 x 2-1/4 #356 Casing
5/8 x 2-1/4 #356 Casing
158MUL-2 9/16 x 2-1/4 Flute & Reed Casing
162MBB
5/8 x 2-1/4 #366 Casing
STANDARD MOULDINGS
CASING
–– 2-7/16
TO
2-1/2 ––
MUL = Ultralite MDF
108MBB
108MUL
128MUL
5/8 x 2-1/2 711 Casing
5/8 x 2-1/2 711 Casing
110MUL
5/8 x 2-1/2 3 Step Casing
134MUL
5/8 x 2-1/2 Bayport Casing
178MUL
11/16 x 2-7/16 Howe Casing
11/16 x 2-1/2 Bel-Air Casing
100
167MUL
11/16 x 2-7/16 #275 Casing
–– 2-1/2
TO
2-5/8 ––
CASING
5/8 x 2-1/2 Cape Cod Casing
157MUL
159MUL
150MUL
STANDARD MOULDINGS
MUL = Ultralite MDF
1-1/4 x 2-1/2 Coronado Casing
1 x 2-1/2 Hermosa Casing
101
164MUL
168MUL
1-1/4 x 2-1/2 Bell Court Casing
3/4 x 2-5/8 Crescent Casing
169MUL
11/16 x 2-1/2 Tudor Casing
119MUL
–– 2-9/16
TO 3-1/4
––
MUL = Ultralite MDF
11/16 x 2-7/8 Colonial Casing
STANDARD MOULDINGS
CASING
181MUL
1 x 2-9/16 Malibu Casing
127MUL
5/8 x 3 New Hampshire Casing
125MUL
11/16 x 2-7/8 Newport Casing
129MUL
3/4 x 3-1/4 Bel-Air Casing
102
165MUL
11/16 x 3 #275 Casing
Available in 17’ only
TO 3-1/4
Lengths Available: 17’
CASING
11/16 x 3-1/4 Palisade Casing
139MUL
160MUL
––
133MUL
–– 3-3/16
STANDARD MOULDINGS
MUL = Ultralite MDF
11/16 x 3-1/4 2RE Casing
1-3/16 x 3-3/16 Hermosa Casing
103
161MUL
170MUL
11/16 x 3-1/4 Cambridge Casing
1 x 3-1/4 Tudor Casing
176MUL
11/16 x 3-1/4 #356 Casing
STANDARD MOULDINGS
CASING
–– 3-3/8
TO
3-1/2 ––
MUL = Ultralite MDF
126MUL
1 x 3-1/2 Crescent Casing
147MUL
1-3/16 x 3-1/2 Savannah Casing (Formerly 187MUL)
104
155MUL
11/16 x 3-1/2 Cape Cod Casing
158MUL-3
180MUL
1-3/8 x 3-3/8 Malibu Casing
9/16 x 3-3/8 Flute & Reed Casing
–– 3-1/2
TO 4-1/4
140MUL
––
CASING
7/8 x 4-1/4 Tuscany Casing
166MUL
STANDARD MOULDINGS
MUL = Ultralite MDF
1 x 3-1/2 #275 Casing
105
173MUL
1-1/4 x 3-1/2 Crescent Casing
175MUL
177MUL
7/8 x 3-3/4 Tuscany Casing
1-1/16 x 3-1/2 Howe Casing
STANDARD MOULDINGS
CASING
–– 4-1/4
TO 5-1/2
143MUL
1-3/16 x 4-1/4 Williamsburg Casing
(Formerly 183MUL)
148MUL
1-3/4 x 4-1/4 Malibu Casing
(Formerly 188MUL)
106
185MUL
1-1/4 x 4-1/4 Carolina Casing
171A
171MUL
9/16 x 5-1/2 Flute & Reed Casing
––
MUL = Ultralite MDF
Lengths Available: 7’, 8’ & 16’
202MBB
202MUL
3/8 x 1-1/4 2RE Stop
3/8 x 1-1/4 2RE Stop
210MUL
1/2 x 1-3/8 2RE Stop
1/2 x 1-3/8 2RE Stop
–– 2-1/4
TO 2-1/2
BASE
––
203MBB
203MUL
1/2 x 1-3/4 Ogee Stop
STANDARD MOULDINGS
DOOR STOP
MUL = Ultralite MDF
107
304MBB
304MUL
3/8 x 2-1/4 Streamline Base
3/8 x 2-1/4 Streamline Base
310MBB
310MUL
7/16 x 2-1/2 711 Base
3/8 x 2-1/2 711 Base
319MBB
M304BB
1/2 x 2-1/2 #356 Base
3/8 x 2-1/4 Reversible Base
–– 3-1/4
TO 3-1/2
MUL = Ultralite MDF
––
STANDARD MOULDINGS
BASE
314MBB 9/16 x 3-1/4 623 Base
314MUL-3 9/16 x 3-1/4 623 Base
366MBB
320MUL
9/16 x 3-1/4 #366 Base
1/2 x 3-1/4 #356 Base
108
325MUL-3
9/16 x 3-1/2 #175 Base
322MUL
311MBB
311MUL
7/16 x 3-1/2 711 Base
3/8 x 3-1/2 711 Base
1/2 x 3-1/2 3 Step Base
–– 3-1/2” ––
BASE
STANDARD MOULDINGS
MUL = Ultralite MDF
118MUL-3 9/16 x 3-1/2 Colonial Base
335MUL
7/16 x 3-1/2 Monterey Base
109
307MUL
9/16 x 3-1/2 Bullnose Base
339MUL
9/16 x 3-1/2 Crescent Base
–– 3-3/4
TO 3-7/8”
––
MUL = Ultralite MDF
STANDARD MOULDINGS
BASE
110
313MUL
7/16 x 3-7/8 Cape Cod Base
329MBB
329MUL
324MUL
9/16 x 3-3/4 Hermosa Base
9/16 x 3-7/8 Newport Base
9/16 x 3-7/8 Newport Base
–– 4
TO
BASE
4-1/8 ––
STANDARD MOULDINGS
MUL = Ultralite MDF
111
318MBB
318MUL
9/16 x 4 Cape Cod Base
9/16 x 4 Cape Cod Base
321MUL
1/2 x 4-1/8 3 Step Base
–– 4-1/4
TO 4-1/2
––
MUL = Ultralite MDF
STANDARD MOULDINGS
BASE
112
314MUL-4 9/16 x 4-1/4 #620 Base
326MUL
325MUL-4 9/16 x 4-1/2 #175 Base
–– 4-1/2
TO 5
––
BASE
STANDARD MOULDINGS
MUL = Ultralite MDF
113
327MUL
323MUL 9/16 x 5 Hermosa Base
9/16 x 4-1/2 New Hampshire Base
330MBB 9/16 x 5 Newport Base
330MUL 9/16 x 5 Newport Base
MUL = Ultralite MDF
STANDARD MOULDINGS
–– 5-1/4” ––
BASE
114
315MBB
315MUL
9/16 x 5-1/4
#618 Base
9/16 x 5-1/4
#618 Base
318BMUL 9/16 x 5-1/4
‘B’ Cape Cod Base
317MUL
9/16 x 5-1/4
Crescent Base
BASE
STANDARD MOULDINGS
–– 5-1/4 ––
MUL = Ultralite MDF
328A
316M MONTEREY BASE
115
341MUL
328MUL
318MUL-5 9/16 x 5-1/4
Cape Cod Base
9/16 x 5-1/4
Monterey Base
9/16 x 5-1/4
Colonial Base
338MUL
9/16 x 5-1/4
#175 Base
–– 5-1/4
TO 5-1/2
––
MUL = Ultralite MDF
STANDARD MOULDINGS
BASE
116
354MUL
361MUL
9/16 x 5-1/4 Sonoma Base
–– 5-1/4
TO
BASE
5-1/2 ––
STANDARD MOULDINGS
MUL = Ultralite MDF
117
365MUL
5/8 x 5-1/4 Lancaster Base
388MUL
377MUL
1/2 x 5-1/2 RE Base
9/16 x 5-1/4 Classic Base
–– 5-3/4
TO 6
––
MUL = Ultralite MDF
STANDARD MOULDINGS
BASE
118
332MBB
332MUL
375MUL 11/16 x 6 Tuscany Base
342MUL
9/16 x 6 #175 Base
–– 6”
TO
BASE
6-1/2 ––
STANDARD MOULDINGS
MUL = Ultralite MDF
119
334MUL
334BMUL
328MUL-6
9/16 x 6-1/8 Colonial Base
3/4 x 6-1/2 Vermont Base
9/16 x 6-1/2 Vermont Base
385MUL
5/8 x 6 Palisade Base
–– 7-1/4” ––
MUL = Ultralite MDF
STANDARD MOULDINGS
BASE
120
333MUL 9/16 x 7-1/4 Mission Bay Base
314MUL-7
9/16 x 7-1/4 #613 Base
–– 7-1/4” ––
BASE
STANDARD MOULDINGS
MUL = Ultralite MDF
121
342MUL-7 9/16 x 7-1/4 #175 Base
340MUL 9/16 x 7-1/4 Hermosa Base
343MUL 9/16 x 7-1/4 Laguna Base
–– 7-1/4” ––
MUL = Ultralite MDF
STANDARD MOULDINGS
BASE
122
345MUL
386MUL
358MUL
9/16 x 7-1/4 Sonoma Base
–– 7-1/4
TO 8
––
BASE
STANDARD MOULDINGS
MUL = Ultralite MDF
123
331MUL
376MUL
3/4 x 7-1/4 Classic Base
9/16 x 8 Newport Base
379MUL
1 x 7-3/8 Savannah Base
–– 8-1/4
TO 8-1/2
––
MUL = Ultralite MDF
STANDARD MOULDINGS
BASE
124
357MUL
5/8 x 8-1/4 #175 Base
380MUL
1 x 8-1/2 Savannah Base
381MUL
1 x 8-1/2 Camden Base
–– 8-1/2
TO
9-1/4 ––
BASE
STANDARD MOULDINGS
MUL = Ultralite MDF
125
382MUL
1 x 8-1/2 Williamsburg Base
383MUL
9/16 x 9-1/4 Sonoma Base 384MUL
9/16 x 9-1/4 Ultralite #175 Base
MUL = Ultralite MDF
–– 1-7/8
1-7/16
1-7/16
TO 3-1/4
––
1-13/16
1-7/8
STANDARD MOULDINGS
CROWN & CORNICE MOLD
420MUL 9/16 x 1-7/8 Bed Mold
402MUL 9/16 x 2-1/2 Bed Mold
126
419MUL 1 x 1-7/8 Corner Mold
2-1/4
1-1/4
2
2-3/8
401MUL
9/16 x 2-5/8 Colonial Crown
405MBB 9/16 x 3-1/4 Colonial Crown
405MUL 9/16 x 3-1/4 Colonial Crown
–– 3-3/8
TO 3-7/16
2-7/16
2-7/8
2-7/16
2-3/8
––
411MUL 1-1/4 x 3-3/4 Cornice
421MUL 3/4 x 3-3/8 Carolina Crown
2-1/2
2-1/2
STANDARD MOULDINGS
MUL = Ultralite MDF
127
2-3/4
2-5/8
DE73P 5/8 x 1/2
True Dentil
(Order Separately–
not included with crown)
426MUL
9/16 x 3-7/16 Georgian Crown
425MUL-3 13/16 x 3-3/4 Dentil Ready Crown
3-1/16
3"
MUL = Ultralite MDF
–– 4-1/4” ––
STANDARD MOULDINGS
3-1/2
2-9/16
128
406MBB
406MUL
407MUL 1-1/8 x 4-1/4 Cornice
–– 4-1/4
––
3“
3-3/16
TO 4-3/8
STANDARD MOULDINGS
MUL = Ultralite MDF
3-1/8
Small 410 Crown
3-3/8
413MUL 9/16 x 4-1/4
129
422MUL 9/16 x 4-3/8 Savannah Crown
–– 4-1/2” ––
3-5/16
3-1/4
STANDARD MOULDINGS
3-1/8
3-1/16
3/4 x 4-1/2 Ultralite Cornice
3-3/8
3-1/4
409MUL
130
412MUL 9/16 x 4-1/2 Georgian Crown
430MUL 1 x 4-1/2 Single Bead Crown
MUL = Ultralite MDF
–– 4-5/8
TO 5-1/16
––
3-5/16
3-5/16
4-1/8
3-1/16
423MBB
423MUL
STANDARD MOULDINGS
MUL = Ultralite MDF
11/16 x 4-5/8 Carolina Crown
7/8 x 4-5/8 Carolina Crown
131
455MBB 11/16 x 5-1/16 Dentil Crown
–– 5-1/4
TO 5-1/2
––
3-7/16
4-7/16
STANDARD MOULDINGS
CROWN
DE74P 15/16 x 5/8
True Dentil
(not included with crown)
3-3/4
3-13/16
132
425MUL-5
13/16 x 5-1/2 Dentil Ready Crown
414MBB
414MUL
MUL = Ultralite MDF
–– 5-5/8” ––
4"
4"
STANDARD MOULDINGS
MUL = Ultralite MDF
133
444MUL
1-1/4 x 5-5/8
Contemporary Crown
–– 6” ––
3-15/16
4-9/16
STANDARD MOULDINGS
134
408MUL
1-1/16 x 6 Cornice
MUL = Ultralite MDF
–– 6” ––
4-5/8
STANDARD MOULDINGS
MUL = Ultralite MDF
3-7/8
135
410MBB
410MUL
11/16 x 6 Crown
11/16 x 6 Crown
–– 6” ––
STANDARD MOULDINGS
136
453MUL 1-1/8 x 6 La Costa Crown
MUL = Ultralite MDF
–– 6-1/4” ––
4-1/2
4-1/2
STANDARD MOULDINGS
MUL = Ultralite MDF
137
435MUL
1-1/8 x 6-1/4 Regal Crown
MUL = Ultralite MDF
–– 6-1/2” ––
4-5/8
4-5/8
STANDARD MOULDINGS
138
416MUL 9/16 x 6-1/2 Colonial Crown
–– 6-1/2” ––
4-5/8
4-5/8
STANDARD MOULDINGS
MUL = Ultralite MDF
139
424MUL 1-1/8 x 6-1/2 Carolina Crown
–– 6-1/2” ––
Lengths Available: all 16’
4-7/8
4-9/16
STANDARD MOULDINGS
140
427MUL 3/4 x 6-1/2 Georgian Crown
MUL = Ultralite MDF
–– 6-1/2” ––
4-3/4
4-7/16
STANDARD MOULDINGS
MUL = Ultralite MDF
141
431MUL 1 x 6-1/2 Single Bead Crown
–– 6-3/4” ––
4-7/8
STANDARD MOULDINGS
142
433MUL 1 x 6-3/4 Del Mar Crown
4-7/8
MUL = Ultralite MDF
–– 7” ––
CROWN
STANDARD MOULDINGS
MUL = Ultralite MDF
5“
5“
143
415MUL 11/16 x 7 Classic Crown
CROWN
–– 7-1/4” ––
STANDARD MOULDINGS
5-1/16
5-1/4
144
417MUL
MUL = Ultralite MDF
–– 7-1/4” ––
CROWN
5-1/8
5-1/8
STANDARD MOULDINGS
MUL = Ultralite MDF
145
445MUL
1-1/4 x 7-1/4 Contemporary Crown
CROWN
–– 8” ––
5-11/16
STANDARD MOULDINGS
5-11/16
146
428MUL
1-1/16 x 8 Georgian Crown
MUL = Ultralite MDF
–– 8” ––
CROWN
5-5/8
STANDARD MOULDINGS
MUL = Ultralite MDF
5-3/4
147
450MUL
1 x 8 LG 410 Crown
–– 8-1/2” ––
6"
6-1/8
STANDARD MOULDINGS
CROWN
148
432MUL
1-1/8 x 8-1/2 Corona Crown
MUL = Ultralite MDF
–– 8-1/2” ––
6-1/8
6-1/8
STANDARD MOULDINGS
MUL = Ultralite MDF
149
454MUL 1-1/8 x 8-1/2 Del Mar Crown
(Formerly 434MUL)
6-1/2
6“
150
449MUL
–– 8-7/8” ––
STANDARD MOULDINGS
MDF CROWN
MUL = Ultralite MDF
–– 11-1/4” ––
MDF CROWN
STANDARD MOULDINGS
MUL = Ultralite MDF
7-1/4
8-5/8
151
429MUL
1 x 11-1/4 Georgian Crown (Not to Scale)
MUL = Ultralite MDF
STANDARD MOULDINGS
CHAIR RAIL
649MUL
3/4 x 3
Bead & Barrel Chair Rail
647MUL
1 x 3-1/2
Malibu Chair Rail
152
651MUL
653MUL
11/16 x 3
Chair Rail
648MUL
1 x 3 Bolection Chair Rail
9/16 x 2-1/2
Chair Rail
WAINSCOT CAP & BASE
STANDARD MOULDINGS
MUL = Ultralite MDF
733MUL 1-1/4 x 2
Panel Cap with 3/4” Rab’t
729MBB 9/16 x 2-1/4
Wainscot Cap with 3/8” Rabt
734MUL 1 x 2-1/2
Panel Cap with 3/8” Rab’t
153
2000 M
2000MBB
2002MBB
3/8 x 3-1/4 Beaded T&G
3/8 x 5-1/2 Beaded T&G
735MUL 1/2 x 3-1/4
Wainscot Base
2001MBB 3/8 x 3-1/4 Flat T&G
2003MBB 3/8 x 5-1/2 Flat T&G
736MUL 1/2 x 5
Wainscot Base
STANDARD MOULDINGS
CLEAT
MUL = Ultralite MDF
FLAT ASTRAGAL / PANEL MOULD
Lengths Available: 7’, 8’ & 16’
10FB
5/8 x 1-1/2 Cleat Unprimed
HOOK
660MUL
15FB
WINDOW STOOL
9/16 x 3-1/4 Hook Unprimed
986MBB
11/16 x 1-3/4 Flat Astragal/Panel Mold
11/16 x 4-3/4 Beveled Stool
987MBB
11/16 x 6-3/4
Beveled Stool
154
988MBB 1 x 4-3/4 Thick Beveled Stool
990MBB
11/16 x 4-3/4 Ogee Stool
989MBB 1 x 7-1/4 Thick Beveled Stool
991MBB 11/16 x 6-3/4 Ogee Stool
11/16
11/16
11/16
11/16
713MBB
714MBB
715MBB
750MBB
x
x
x
x
1-1/2
2-1/2
3-1/2
5-1/2
S4S Primed
S4S Primed
S4S Primed
S4S Primed
751MBB
752MBB
753MBB
11/16 x 7-1/4 S4S Primed
11/16 x 9-1/4 S4S Primed
11/16 x 11-1/4 S4S Primed
WALL CAP
Standard MDF
1101MBB
1102MBB
1103MBB
11/16 x 5-1/2 2EE Primed
1-1/4 x 5-1/2 2EE Primed
11/16 x 7-1/4 2EE Primed
1104MBB
1105MBB
1-1/4 x 7-1/4 2EE Primed
11/16 x 6-1/2 2EE Primed
MDF SHELVING
BULLNOSE
Unprimed - Bullnose
11MDF
12MDF
11/16 x 11-1/4 2EE Shelving
11/16 x 15-1/4 2EE Shelving
Unprimed
13MDF
Standard MDF
STANDARD MOULDINGS
S4S
MUL = Ultralite MDF
11/16 x 23-1/4 Shelving
155
BUILT-UPS
STANDARD MOULDINGS
Built-ups for ceiling, door and floor
applications can consist of a wide variety of
arrangements. By using different
combinations of Crown, Base, Casing, S4S,
and Panel Mold you can make a more
impressive statement with your moulding
choices.
Built-Up combinations enable you to
combine multiple moulding profiles
to produce an extraordinary effect.
Built-ups combine two or more moulding
profiles to create a completely new design
and customized look and make it easy to
create custom details without the custom
expense.
We invite you to look through the following
section to begin the process of unlimited
creativity and imagination.
325MUL, 408MUL
156
324MUL, 423MUL
318BMUL, 411MUL
STANDARD MOULDINGS
BUILT-UPS
324MUL, 427MUL
157
380MUL, 431MUL
412MUL, 325MUL
STANDARD MOULDINGS
BUILT-UPS
382MUL, 424MUL
158
410MUL, 324MUL
STANDARD MOULDINGS
BUILT-UPS
410MUL, 660MUL
159
415MUL, 334MUL
STANDARD MOULDINGS
BUILT-UPS
160
424MUL, 340MUL
429MUL, 334MUL
STANDARD MOULDINGS
BUILT-UPS
433MUL, 326MUL
161
CM73, 330MUL
STANDARD MOULDINGS
BUILT-UPS
CM73, 338MUL
cm73/338
162
118MUL, 414MUL

Ultralite and Basic Mdf - EL and EL Wood Products

Transcription

Similar documents

Catalog PDF - EL and EL Wood Products

VIRCO FURNITURE FAVORITES

Closet Material / Hinges / Shims

section contents - EL and EL Wood Products

Decorative Carvings - EL and EL Wood Products