Open the brochure

Transcription

Open the brochure
TECHNICAL GUIDE FOR HOISTS
Dimensions (SI/50Hz)
SI
SUPDOCTGQDIM3-0.ORD 23.12.2011
- - - 080674
10.10.2010
Boehringer Straße 4
68307 Mannheim
Germany
tel
+49(0)621 789-900
fax
+49(0)621 789 90-100
[email protected]
www.swfkrantechnik.com
English
30/12/2011
1 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
Original instructions
SUPDOCTGQDIM30100-0 PS02505 23.12.2011
SWF Krantechnik GmbH
Postbox 310410
68264 Mannheim
Germany
TECHNICAL GUIDE FOR HOISTS
Table of contents
1 CHANGE HISTORY ........................................................................................................................... 6
LOW HEADROOM TROLLEY .................................................................................................................. 8
2 LOW HEADROOM HOIST NB, REEVING: 02.................................................................................... 9
3 LOW HEADROOM HOIST NB, REEVING: 04.................................................................................. 11
4 LOW HEADROOM HOIST NC, REEVING: 02 ................................................................................. 13
5 LOW HEADROOM HOIST NC, REEVING: 04 ................................................................................. 15
6 LOW HEADROOM HOIST NC, REEVING: 04, EXTENDED LOAD .................................................. 17
7 LOW HEADROOM HOIST NC, REEVING: A2 ................................................................................. 19
8 LOW HEADROOM HOIST NC, REEVING: A4 ................................................................................. 21
9 LOW HEADROOM HOIST ND, REEVING: 02 ................................................................................. 23
10
LOW HEADROOM HOIST ND, REEVING: 04 .............................................................................. 25
11
LOW HEADROOM HOIST ND, REEVING: 04, EXTENDED LOAD .............................................. 27
DOUBLE GIRDER TROLLEY, MEDIUM ................................................................................................ 29
12
DOUBLE GIRDER HOIST NB, REEVING: 02............................................................................... 31
13
DOUBLE GIRDER HOIST NB, REEVING: 04............................................................................... 33
14
DOUBLE GIRDER HOIST NC, REEVING: 02............................................................................... 35
15
DOUBLE GIRDER HOIST NC, REEVING: 04............................................................................... 37
16
DOUBLE GIRDER HOIST ND, REEVING: 02............................................................................... 39
17
DOUBLE GIRDER HOIST ND, REEVING: 04............................................................................... 41
18
DOUBLE GIRDER HOIST ND, REEVING: 06............................................................................... 43
19
DOUBLE GIRDER HOIST ND, REEVING: 08............................................................................... 45
20
DOUBLE GIRDER HOIST ND, REEVING: 22............................................................................... 47
21
DOUBLE GIRDER HOIST ND, REEVING: 24............................................................................... 49
22
DOUBLE GIRDER HOIST ND, REEVING: 26............................................................................... 51
23
DOUBLE GIRDER HOIST ND, REEVING: 28............................................................................... 53
24
DOUBLE GIRDER HOIST NE, REEVING: 02............................................................................... 55
25
DOUBLE GIRDER HOIST NE, REEVING: 04............................................................................... 57
26
DOUBLE GIRDER HOIST NE, REEVING: 06............................................................................... 59
27
DOUBLE GIRDER HOIST NE, REEVING: 08............................................................................... 61
28
DOUBLE GIRDER HOIST NE, REEVING: 22............................................................................... 63
29
DOUBLE GIRDER HOIST NE, REEVING: 24............................................................................... 65
30
DOUBLE GIRDER HOIST NE, REEVING: 26............................................................................... 67
31
DOUBLE GIRDER HOIST NE, REEVING: 28............................................................................... 69
32
DOUBLE GIRDER HOIST NF, REEVING: 22 ............................................................................... 71
33
DOUBLE GIRDER HOIST NF, REEVING: 24 ............................................................................... 73
34
DOUBLE GIRDER HOIST NF, REEVING: 26 ............................................................................... 75
35
DOUBLE GIRDER HOIST NF, REEVING: 28 ............................................................................... 77
36
TWO HOIST TROLLEY ND 04 + NC 02 ....................................................................................... 79
37
TWO HOIST TROLLEY ND 04 + NC 04 ....................................................................................... 81
38
TWO HOIST TROLLEY NE 04 + NC 02 ....................................................................................... 83
English
30/12/2011
2 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
39
TWO HOIST TROLLEY NE 04 + NC 04 ....................................................................................... 85
40
TWO HOIST TROLLEY NE 04 + ND 02 ....................................................................................... 87
41
TWO HOIST TROLLEY NE 04 + ND 04 ....................................................................................... 89
42
TWO HOIST TROLLEY NE 06 + NC 04 ....................................................................................... 91
43
TWO HOIST TROLLEY NE 06 + ND 04 ....................................................................................... 93
44
TWO HOIST TROLLEY NF 24 + NC 04 ....................................................................................... 95
45
TWO HOIST TROLLEY NF 24 + ND 02 ....................................................................................... 97
46
TWO HOIST TROLLEY NF 24 + ND 04 ....................................................................................... 99
47
TWO HOIST TROLLEY NF 24 + NE 04 ..................................................................................... 101
48
TWO HOIST TROLLEY NF 26 + NC 04 ..................................................................................... 103
49
TWO HOIST TROLLEY NF 26 + ND 04 ..................................................................................... 105
50
TWO HOIST TROLLEY NF 26 + NE 04 ..................................................................................... 107
DOUBLE GIRDER TROLLEY, HIGH ................................................................................................... 109
51
HIGH DOUBLE GIRDER HOIST NB, REEVING: 02 .................................................................. 111
52
HIGH DOUBLE GIRDER HOIST NB, REEVING: 04 .................................................................. 113
53
HIGH DOUBLE GIRDER HOIST NC, REEVING: 02 .................................................................. 115
54
HIGH DOUBLE GIRDER HOIST NC, REEVING: 04 .................................................................. 117
55
HIGH DOUBLE GIRDER HOIST ND, REEVING: 02 .................................................................. 119
56
HIGH DOUBLE GIRDER HOIST ND, REEVING: 04 .................................................................. 121
57
HIGH DOUBLE GIRDER HOIST ND, REEVING: 06 .................................................................. 123
58
HIGH DOUBLE GIRDER HOIST ND, REEVING: 08 .................................................................. 125
59
HIGH DOUBLE GIRDER HOIST ND, REEVING: 22 .................................................................. 127
60
HIGH DOUBLE GIRDER HOIST ND, REEVING: 24 .................................................................. 129
61
HIGH DOUBLE GIRDER HOIST ND, REEVING: 26 .................................................................. 131
62
HIGH DOUBLE GIRDER HOIST ND, REEVING: 28 .................................................................. 133
DOUBLE GIRDER TROLLEY, LOW .................................................................................................... 135
63
LOW DOUBLE GIRDER HOIST ND, REEVING: 02 ................................................................... 137
64
LOW DOUBLE GIRDER HOIST ND, REEVING: 04 ................................................................... 139
NORMAL HEADROOM TROLLEY ...................................................................................................... 141
65
NORMAL HEADROOM HOIST NB, REEVING: 02 .................................................................... 143
66
NORMAL HEADROOM HOIST NB, REEVING: 04 .................................................................... 145
67
NORMAL HEADROOM HOIST NC, REEVING: 02 .................................................................... 147
68
NORMAL HEADROOM HOIST NC, REEVING: 02, CURVED TRACK ...................................... 149
69
NORMAL HEADROOM HOIST NC, REEVING: 04 .................................................................... 151
70
NORMAL HEADROOM HOIST NC, REEVING: 04, CURVED TRACK ...................................... 153
71
NORMAL HEADROOM HOIST ND, REEVING: 02 .................................................................... 155
72
NORMAL HEADROOM HOIST ND, REEVING: 02, CURVED TRACK ...................................... 157
73
NORMAL HEADROOM HOIST ND, REEVING: 04 .................................................................... 159
74
NORMAL HEADROOM HOIST ND, REEVING: 04, CURVED TRACK ...................................... 161
75
NORMAL HEADROOM HOIST ND, REEVING: 06 .................................................................... 163
76
NORMAL HEADROOM HOIST ND, REEVING: 06, CURVED TRACK ..................................... 165
77
NORMAL HEADROOM HOIST ND, REEVING: 08 .................................................................... 167
78
NORMAL HEADROOM HOIST ND, REEVING: 08, CURVED TRACK ...................................... 169
79
NORMAL HEADROOM HOIST ND, REEVING: 22 .................................................................... 171
80
NORMAL HEADROOM HOIST ND, REEVING: 22, CURVED TRACK ...................................... 173
English
30/12/2011
3 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
81
NORMAL HEADROOM HOIST ND, REEVING: 24 ..................................................................... 175
82
NORMAL HEADROOM HOIST ND, REEVING: 24, CURVED TRACK ....................................... 177
83
NORMAL HEADROOM HOIST ND, REEVING: 26 ..................................................................... 179
84
NORMAL HEADROOM HOIST ND, REEVING: 26, CURVED TRACK ....................................... 181
85
NORMAL HEADROOM HOIST ND, REEVING: 28 ..................................................................... 183
86
NORMAL HEADROOM HOIST ND, REEVING: 28, CURVED TRACK ....................................... 185
87
NORMAL HEADROOM HOIST NE, REEVING: 02 ..................................................................... 187
88
NORMAL HEADROOM HOIST NE, REEVING: 04 ..................................................................... 189
89
NORMAL HEADROOM HOIST NE, REEVING: 06 ..................................................................... 191
90
NORMAL HEADROOM HOIST NE, REEVING: 22 ..................................................................... 193
91
NORMAL HEADROOM HOIST NE, REEVING: 24 ..................................................................... 195
92
NORMAL HEADROOM HOIST NE, REEVING: 26 ..................................................................... 197
93
NORMAL HEADROOM HOIST NE, REEVING: 28 ..................................................................... 199
FIXED HOIST ....................................................................................................................................... 201
94
FIXED HOIST NB, REEVING: 02................................................................................................ 203
95
FIXED HOIST NB, REEVING: 04................................................................................................ 205
96
FIXED HOIST NC, REEVING: 02 ............................................................................................... 207
97
FIXED HOIST NC, REEVING: 04 ............................................................................................... 209
98
FIXED HOIST ND, REEVING: 02 ............................................................................................... 211
99
FIXED HOIST ND, REEVING: 04 ............................................................................................... 213
100 FIXED HOIST ND, REEVING: 06 ............................................................................................... 215
101 FIXED HOIST ND, REEVING: 08 ............................................................................................... 217
102 FIXED HOIST ND, REEVING: 22 ............................................................................................... 219
103 FIXED HOIST ND, REEVING: 24 ............................................................................................... 221
104 FIXED HOIST ND, REEVING: 26 ............................................................................................... 223
105 FIXED HOIST ND, REEVING: 28 ............................................................................................... 225
106 FIXED HOIST NE, REEVING: 02................................................................................................ 227
107 FIXED HOIST NE, REEVING: 04................................................................................................ 229
108 FIXED HOIST NE, REEVING: 06................................................................................................ 231
109 FIXED HOIST NE, REEVING: 08................................................................................................ 233
110 FIXED HOIST NE, REEVING: 22................................................................................................ 235
111 FIXED HOIST NE, REEVING: 24................................................................................................ 237
112 FIXED HOIST NE, REEVING: 26................................................................................................ 239
113 FIXED HOIST NE, REEVING: 28................................................................................................ 241
114 FIXED HOIST NF, REEVING: 22................................................................................................ 243
115 FIXED HOIST NF, REEVING: 24................................................................................................ 245
116 FIXED HOIST NF, REEVING: 26................................................................................................ 247
117 FIXED HOIST NF, REEVING: 28................................................................................................ 249
SPECIAL LOW HEADROOM HOIST ................................................................................................... 251
118 SPECIAL LOW HEADROOM HOIST NB, REEVING: 04 ............................................................ 253
MACHINERY HOIST ............................................................................................................................ 255
119 MACHINERY HOIST NBM1V, REEVING: M1............................................................................. 257
120 MACHINERY HOIST NBM2V, REEVING: M2, ROPES TO SAME DIRECTION ......................... 259
121 MACHINERY HOIST NBM2V, REEVING: M2, ROPES TO OPPOSITE DIRECTIONS............... 261
122 MACHINERY HOIST NCM1V, REEVING: M1 ............................................................................ 263
English
30/12/2011
4 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
123
124
125
126
127
128
129
130
MACHINERY HOIST NCM2V, REEVING: M2, ROPES TO SAME DIRECTION ........................ 265
MACHINERY HOIST NCM2V, REEVING: M2, ROPES TO OPPOSITE DIRECTIONS .............. 267
MACHINERY HOIST NDM1V, REEVING: M1 ............................................................................ 269
MACHINERY HOIST NDM2V, REEVING: M2, ROPES TO SAME DIRECTION ........................ 271
MACHINERY HOIST NDM2V, REEVING: M2, ROPES TO OPPOSITE DIRECTIONS .............. 273
MACHINERY HOIST NEM1V, REEVING: M1 ............................................................................ 275
MACHINERY HOIST NEM2V, REEVING: M2 ............................................................................ 277
HOOK ........................................................................................................................................ 279
130.1
130.2
130.3
Hook block dimensions ..................................................................................................................... 279
New hook blocks to be released in 2012 ........................................................................................... 280
Hook forging dimensions ................................................................................................................... 281
131 DRUM AND ROPE SHEAVE DIAMETERS ................................................................................ 282
PRODUCTS TO BE PHASED OUT IN 2012........................................................................................ 283
132 DOUBLE GIRDER HOIST ND, REEVING: 06 ............................................................................ 285
133 DOUBLE GIRDER HOIST ND, REEVING: 08 ............................................................................ 287
134 DOUBLE GIRDER HOIST ND, REEVING: 22 ............................................................................ 289
135 DOUBLE GIRDER HOIST ND, REEVING: 24 ............................................................................ 291
136 DOUBLE GIRDER HOIST ND, REEVING: 26 ............................................................................ 293
137 DOUBLE GIRDER HOIST ND, REEVING: 28 ............................................................................ 295
138 HIGH DOUBLE GIRDER HOIST ND, REEVING: 06 .................................................................. 297
139 HIGH DOUBLE GIRDER HOIST ND, REEVING: 08 .................................................................. 299
140 HIGH DOUBLE GIRDER HOIST ND, REEVING: 22 .................................................................. 301
141 HIGH DOUBLE GIRDER HOIST ND, REEVING: 24 .................................................................. 303
142 HIGH DOUBLE GIRDER HOIST ND, REEVING: 26 .................................................................. 305
143 HIGH DOUBLE GIRDER HOIST ND, REEVING: 28 .................................................................. 307
144 NORMAL HEADROOM HOIST ND, REEVING: 06 .................................................................... 309
145 NORMAL HEADROOM HOIST ND, REEVING: 06, CURVED TRACK ..................................... 311
146 NORMAL HEADROOM HOIST ND, REEVING: 08 .................................................................... 313
147 NORMAL HEADROOM HOIST ND, REEVING: 08, CURVED TRACK ...................................... 315
148 NORMAL HEADROOM HOIST ND, REEVING: 22 .................................................................... 317
149 NORMAL HEADROOM HOIST ND, REEVING: 22, CURVED TRACK ...................................... 319
150 NORMAL HEADROOM HOIST ND, REEVING: 24 .................................................................... 321
151 NORMAL HEADROOM HOIST ND, REEVING: 24, CURVED TRACK ...................................... 323
152 NORMAL HEADROOM HOIST ND, REEVING: 26 .................................................................... 325
153 NORMAL HEADROOM HOIST ND, REEVING: 26, CURVED TRACK ...................................... 327
154 NORMAL HEADROOM HOIST ND, REEVING: 28 .................................................................... 329
155 NORMAL HEADROOM HOIST ND, REEVING: 28, CURVED TRACK ...................................... 331
156 FIXED HOIST ND, REEVING: 06............................................................................................... 333
157 FIXED HOIST ND, REEVING: 08............................................................................................... 335
158 FIXED HOIST ND, REEVING: 22............................................................................................... 337
159 FIXED HOIST ND, REEVING: 24............................................................................................... 339
160 FIXED HOIST ND, REEVING: 26............................................................................................... 341
161 FIXED HOIST ND, REEVING: 28............................................................................................... 343
English
30/12/2011
5 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
1
CHANGE HISTORY
Change
Table code
Modified by
Date
MOT dimension corrected.
MOT dimension corrected.
124132
124133
ETTPSU
ETTPSU
22.12.2011
22.12.2011
MOT dimension corrected.
124134
ETTPSU
22.12.2011
MOT dimension corrected.
124135
ETTPSU
22.12.2011
MOT dimension corrected. Missing H1 dimension added.
124515
ETTPSU
22.12.2011
MOT dimension corrected. Missing H1 dimension added.
124516
ETTPSU
22.12.2011
MOT dimension corrected. Missing H1 dimension added.
124517
ETTPSU
22.12.2011
MOT dimension corrected. Missing H1 dimension added.
124518
ETTPSU
22.12.2011
MOT dimension corrected.
124426
ETTPSU
22.12.2011
MOT dimension corrected.
124427
ETTPSU
22.12.2011
MOT dimension corrected.
124428
ETTPSU
22.12.2011
MOT dimension corrected.
124429
ETTPSU
22.12.2011
MOT dimension corrected.
124578
ETTPSU
22.12.2011
MOT dimension corrected.
124579
ETTPSU
22.12.2011
MOT dimension corrected.
124580
ETTPSU
22.12.2011
MOT dimension corrected.
124581
ETTPSU
22.12.2011
MOT dimension corrected.
124936
ETTPSU
22.12.2011
MOT dimension corrected.
124937
ETTPSU
22.12.2011
MOT dimension corrected.
124938
ETTPSU
22.12.2011
MOT dimension corrected.
124939
ETTPSU
22.12.2011
MOT dimension corrected.
124940
ETTPSU
22.12.2011
MOT dimension corrected.
124941
ETTPSU
22.12.2011
MOT dimension corrected.
124942
ETTPSU
22.12.2011
MOT dimension corrected.
124943
ETTPSU
22.12.2011
MOT dimension corrected.
126313
ETTPSU
22.12.2011
MOT dimension corrected.
126314
ETTPSU
22.12.2011
MOT dimension corrected.
126316
ETTPSU
22.12.2011
MOT dimension corrected.
126317
ETTPSU
22.12.2011
MOT dimension corrected.
126318
ETTPSU
22.12.2011
MOT dimension corrected.
126319
ETTPSU
22.12.2011
English
Drawing code
30/12/2011
6 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
English
30/12/2011
7 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
LOW HEADROOM TROLLEY
English
30/12/2011
8 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
2
LOW HEADROOM HOIST NB, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
800
3m/M6
1000
2m/M5
1250
3m/M6
1600
2m/M5
F gear + P1/T1 motor
High
Low
10
1.7
10
1.7
-
Hoist dimensions
HOL
Length
m
code
12
A
19
C
M1
mm
431
561
Motor dimensions
Motor
P1
M2 (mm)
498
Weight ( kg)
21
P2
558
31
Trolley dimensions
B min.
B max.
80
E1
303
L6
68
410
E2
305
L7
203
D1 (∅
∅)
80
E4
380
L9
33
D3 (∅
∅)
40
E5
236
L10
29
F gear + P2/T2 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
H2
mm
90
144
P3
588
35
E7
192
L12
148
H5
mm
501
501
T1
498
22
H5*
mm
516
516
T2
498
22
E9
75
L16
22
E11
387
L17
29
G gear + P2/T2 motor
High
Low
12.5
2.1
12.5
2.1
12.5
2.1
12.5
2.1
L11
mm
203
333
L15
mm
225
292
H gear + P3/T3 motor
High
Low
16
2.7
16
2.7
16
2.7
16
2.7
W2
mm
166
231
Weight
kg
175
195
T3
498
22
H1
71
M3
158
H6
523
M6
115
L2
25
W1
64.4
L4
376
L5
248
D002075_A
061739
C-dimensions
B
80 271 321 371 -
270
320
370
410
C
400
430
460
485
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
9 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Headroom Hoist NB, REEVING: 02
English
30/12/2011
10 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
3
LOW HEADROOM HOIST NB, REEVING: 04
Load
kg
1600
2000
2500
3200
Class
Fem/ISO
3m/M6
2m/M5
3m/M6
2m/M5
F gear + P1/T1 motor
High
Low
5
0.8
5
0.8
-
Hoist dimensions
HOL
Length
m
code
6
A
9.5
C
Motor dimensions
Motor
P1
M2 (mm)
498
Weight ( kg)
21
Trolley dimensions
B min.
B max.
80
E1
303
L6
68
410
E2
305
L7
203
M1
mm
431
561
P2
558
31
D1 (∅
∅)
80
E4
380
L9
33
D3 (∅
∅)
40
E5
236
L10
29
H2
mm
45
72
P3
588
35
E7
192
L12
148
G gear + P2/T2 motor
High
Low
6.3
1.1
6.3
1.1
6.3
1.1
6.3
1.1
H5
mm
501
501
T1
498
22
H5*
mm
516
516
T2
498
22
E9
75
L16
22
H gear + P3/T2 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
E11
387
L17
29
L11
mm
203
333
L15
mm
225
292
W2
mm
166
231
Weight
kg
180
200
T3
498
22
H1
15
M3
158
H6
523
M6
115
L2
25
W1
64.4
L4
376
L5
248
D002080_A
062124
C-dimensions
B
80 271 321 371 -
270
320
370
410
C
350
380
410
435
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
11 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Headroom Hoist NB, REEVING: 04
English
30/12/2011
12 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
4
LOW HEADROOM HOIST NC, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
2000
3m/M6
2500
2m/M5
3200
1Am/M4
E gear + P3/T3 motor
High
Low
8
1.3
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
12
B
18
C
24
D
M1
mm
467
567
667
Motor dimensions
Motor
P3
M2 (mm)
597
Weight ( kg)
35
Trolley dimensions
B min.
B max.
100
E1
338
L6
5.8
490
E2
305
L7
346
P4
690
53
D1 (∅
∅)
100
E4
380
L9
45
D3 (∅
∅)
63
E5
236
L10
42
F gear + P3/T3 motor
High
Low
10
1.7
10
1.7
-
H2
mm
95
144
193
H5
mm
574
574
574
T3
507
22
T4
610
45
E7
256
L12
198
E9
125
L16
53
H5*
mm
590
590
590
E11
415
M3
173
H gear + P4/T4 motor
High
Low
16
2.7
16
2.7
-
L11
mm
346
446
546
H1
88
M6
121
W3
mm
202.5
302.5
402.5
H6
538
W1
80.6
Weight
kg
325
345
365
L2
37.5
W2
202.5
L4
427
L5
241
D002087_A
001576
C-dimensions
B
100 251 301 351 401 451 -
250
300
350
400
450
490
C
440
470
505
535
570
595
Note: All dimensions in mm.
Note: Weight calculated with P3 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
13 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Headroom Hoist NC, REEVING: 02
English
30/12/2011
14 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
5
LOW HEADROOM HOIST NC, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
F gear + P3/T3 motor
High
Low
5
0.8
5
0.8
H gear + P4/T4 motor
High
Low
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
6
B
9
C
12
D
M1
mm
467
567
667
H2
mm
49
74
99
H5
mm
574
574
574
Motor dimensions
Motor
P3
M2 (mm)
597
Weight ( kg)
35
P4
690
53
T3
507
22
T4
610
45
Trolley dimensions
B min.
B max.
100
E1
338
L6
5.8
490
E2
305
L7
346
D1 (∅
∅)
100
E4
380
L9
45
D3 (∅
∅)
63
E5
236
L10
42
E7
256
L12
198
E9
125
L16
53
H5*
mm
590
590
590
E11
415
M3
173
L11
mm
346
446
546
H1
8
M6
121
W3
mm
202.5
302.5
402.5
H6
538
W1
80.6
Weight
kg
330
350
370
L2
37.5
W2
202.5
L4
427
L5
241
D002092_A
062166
C-dimensions
B
100 200 250 301 351 401 451 -
199
249
300
350
400
450
490
C
490
460
425
455
490
520
550
Note: All dimensions in mm.
Note: Weight calculated with P3 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
15 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Headroom Hoist NC, REEVING: 04
English
30/12/2011
16 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
6
LOW HEADROOM HOIST NC, REEVING: 04, EXTENDED LOAD
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
6300
1Am/M4
E gear + P3/T3 motor
High
Low
4
0.7
Hoist dimensions
HOL
Length
m
code
6
B
9
C
12
D
M1
mm
467
567
667
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
T3
507
22
Trolley dimensions
B min.
B max.
100
E1
332
L6
1.5
490
E2
305
L7
388
P3
597
35
D1 (∅
∅)
125
E4
380
L9
42
D3 (∅
∅)
63
E5
236
L10
40
H2
mm
49
74
99
E7
256
L12
185
H5
mm
578
578
578
E9
125
L16
80
H5*
mm
594
594
594
E11
421
M3
188
H1
22
M6
121
L11
mm
358
458
558
H6
538
W1
97.5
W3
mm
195
295
395
L2
41.5
W2
225
Weight
kg
330
350
370
L4
427
L5
253
D002093_A
062511
C-dimensions
B
100 200 250 301 351 401 451 -
199
249
300
350
400
450
490
C
505
470
440
475
505
540
570
Note: All dimensions in mm.
Note: Weight calculated with P3 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
17 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Headroom Hoist NC, REEVING: 04, Extended Load
English
30/12/2011
18 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
7
LOW HEADROOM HOIST NC, REEVING: A2
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
1250
3m/M6
1600
2m/M5
Hoist dimensions
HOL
Length
m
code
22.5
C
30
D
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min.
B max
100
E1
338
L6
5.8
490
E2
305
L7
346
E gear + P2/T2 motor
High
Low
8
1.3
8
1.3
M1
mm
567
667
P2
567
35
D1 (∅
∅)
63
E4
380
L9
45
H2
mm
144
193
P4
690
53
D2 (∅
∅)
100
E5
236
L10
42
H5
mm
574
574
T2
507
22
E7
256
L12
198
F gear + P2/T2 motor
High
Low
10
1.7
10
1.7
H5*
mm
590
590
L11
mm
446
546
W3
mm
302.5
402.5
H1
88
M6
121
H6
536
W1
80.6
H gear + P4/T4 motor
High
Low
16
2.7
16
2.7
Weight
kg
320
340
T4
610
45
E9
125
L16
53
E11
415
M3
173
L2
37.5
W2
202.5
L4
427
L5
241
D002106_A
062531
C-dimensions
B
100 251 301 351 401 451 -
250
300
350
400
450
490
C
410
440
475
505
540
570
Note: All dimensions in mm.
Note: Weight calculated with P2 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
19 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Headroom Hoist NC, REEVING: A2
English
30/12/2011
20 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
8
LOW HEADROOM HOIST NC, REEVING: A4
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
2500
3m/M6
3200
2m/M5
Hoist dimensions
HOL
Length
m
code
11
C
15
D
M1
mm
567
667
Motor dimensions
Motor
P2
M2 (mm)
567
Weight ( kg)
35
Trolley dimensions
B min.
B max.
100
E1
338
L6
5.8
490
E2
305
L7
346
E gear + P2/T2 motor
High
Low
4
0.7
4
0.7
P4
690
53
D1 (∅
∅)
100
E4
380
L9
45
D3 (∅
∅)
63
E5
236
L10
42
H2
mm
73
99
T2
507
22
E7
256
L12
198
F gear + P2/T2 motor
High
Low
5
0.8
5
0.8
H5
mm
574
574
H5*
mm
590
590
L11
mm
446
546
H gear + P4/T4 motor
High
Low
8
1.3
8
1.3
W3
mm
302.5
402.5
Weight
kg
335
355
T4
610
45
E9
125
L16
53
E11
415
M3
173
H1
28
M6
121
H6
536
W1
80.6
L2
37.5
W2
202.5
L4
427
L5
241
D002107_A
062529
C-dimensions
B
100 241 301 351 401 451 -
240
300
350
400
450
490
C
340
380
415
445
480
510
Note: All dimensions in mm.
Note: Weight calculated with P2 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
21 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Headroom Hoist NC, REEVING: A4
English
30/12/2011
22 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
9
LOW HEADROOM HOIST ND, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
6300
1Am/M4
Hoist dimensions
HOL
Length
m
code
18
D
24
E
32
F
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
8
1.3
M1
mm
697
817
967
Motor dimensions
Motor
P5
M2 (mm)
722
Weight ( kg)
58
Trolley dimensions
B min.
B max.
100
L1
175
610
L2
411
H2
mm
176
235
309
P6
722
85
D1 (∅
∅)
125
L3
620
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
-
D2 (∅
∅)
63
L5
3
H3
mm
647
767
917
P7
762
105
T5
642
45
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
-
L12
mm
1058
1178
1328
T6
722
65
W
mm
708
828
978
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
-
L4
mm
672
672
672
L4*
mm
692
692
692
Weight
kg
595
640
690
T7
722
71
H1
236
L6
41
L7
35
L8
262
L9
60
L10
513
L11
106
D002112_A
059568
C-dimensions
B
100 200 260 441 541 -
199
259
440
540
610
C
630
600
580
640
680
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
* Please, disregard the dimension L4*.
English
30/12/2011
23 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Headroom Hoist ND, REEVING: 02
English
30/12/2011
24 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
10 LOW HEADROOM HOIST ND, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
5000
3m/M6
6300
3m/M6
8000
3m/M6
10000
2m/M5
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
9
D
12
E
16
F
M1
mm
697
817
967
Motor dimensions
Motor
P5
M2 (mm)
722
Weight ( kg)
58
Trolley dimensions
B min.
B max.
100
L1
175
610
L2
489
P6
722
85
D1 (∅
∅)
125
L3
620
D2 (∅
∅)
63
L5
3
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
H2
mm
88
118
156
P7
762
105
H3
mm
569
689
839
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
L12
mm
1058
1178
1328
T5
642
45
T6
722
65
L7
35
L8
262
W
mm
708
828
978
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
L4
mm
674
674
674
L4*
mm
694
694
694
Weight
kg
610
660
710
T7
722
71
H1
314
L6
40
L9
60
L10
513
L11
106
D002117_A
004991
C-dimensions
B
100 200 290 431 531 -
199
289
430
530
610
C
610
575
530
595
650
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
* Please, disregard the dimension L4*.
English
30/12/2011
25 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Headroom Hoist ND, REEVING: 04
English
30/12/2011
26 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
11 LOW HEADROOM HOIST ND, REEVING: 04, EXTENDED LOAD
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12500
1Am/M4
E gear + P5/T5 motor
High
Low
4
0.7
Hoist dimensions
HOL
Length
m
code
9
D
12
E
16
F
M1
mm
697
817
967
Motor dimensions
Motor
P5
M2 (mm)
722
Weight ( kg)
58
Trolley dimensions
B min.
B max.
100
L1
175
610
L2
488
P6
722
85
D1 (∅
∅)
150
L3
619
D2 (∅
∅)
63
L5
4
F gear + P5/T5 motor
High
Low
-
H2
mm
88
118
156
H3
mm
569
689
839
P7
762
105
T5
642
45
L12
mm
1058
1178
1328
T6
722
65
H gear + P6/T5 motor
High
Low
-
W
mm
708
828
978
J gear + P7/T7 motor
High
Low
-
L4
mm
670
670
670
L4*
mm
690
690
690
Weight
kg
610
660
710
T7
722
71
H1
313
L6
44
L7
48
L8
272
L9
47
L10
510
L11
107
D002118_A
005000
C-dimensions
B
100 200 290 431 531 -
199
289
430
530
610
C
655
620
585
650
695
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
* Please, disregard the dimension L4*.
English
30/12/2011
27 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Headroom Hoist ND, REEVING: 04, Extended Load
English
30/12/2011
28 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
DOUBLE GIRDER TROLLEY, MEDIUM
English
30/12/2011
29 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
English
30/12/2011
30 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
12 DOUBLE GIRDER HOIST NB, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
800
3m/M6
1000
2m/M5
1250
3m/M6
1600
2m/M5
F gear + P1/T1 motor
High
Low
10
1.7
10
1.7
-
Hoist dimensions
HOL
Length
m
code
12
A
19
C
Motor dimensions
Motor
P1
M2 (mm)
498
Weight (kg)
21
Trolley dimensions
C
D1(∅
∅)
320
90
L1
L2
83
324
L14
L15
319
138
M1
mm
431
561
P2
558
31
D2(∅
∅)
120
L3
250
L16
104
H2
mm
90
144
P3
588
35
D3(∅
∅)
63
L4
15
L17
600
F gear + P2/T2 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
Min R
mm
1200
1200
T1
498
22
G gear + P2/T2 motor
High
Low
12.5
2.1
12.5
2.1
12.5
2.1
12.5
2.1
L6
mm
87
87
T2
498
22
L6*
mm
72
72
H gear + P3/T3 motor
High
Low
16
2.7
16
2.7
16
2.7
16
2.7
Weight
kg
220
230
T3
498
22
H1
WB
W min
W max
519
L5
1096
L18
212
820
L7
376
L19
138
50
L8
265
70
L9
90
L10
397
L11
423
L12
535
L13
561
D002076_A
062126
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
Note: Min R with second brake.
Note: Standard rail gauges: 1200, 1400, 1700 and 2000.
* Please, disregard the dimension L6*.
English
30/12/2011
31 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NB, REEVING: 02
English
30/12/2011
32 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
13 DOUBLE GIRDER HOIST NB, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
1600
3m/M6
2000
2m/M5
2500
3m/M6
3200
2m/M5
F gear + P1/T1 motor
High
Low
5
0.8
5
0.8
-
Hoist dimensions
HOL
Length
m
code
6
A
9.5
C
Motor dimensions
Motor
P1
M2 (mm)
498
Weight (kg)
21
Trolley dimensions
C
D1(∅
∅)
270
90
L1
L2
83
324
L14
L15
319
138
M1
mm
431
561
P2
558
31
D2(∅
∅)
120
L3
250
L16
104
H2
mm
45
72
P3
588
35
D3(∅
∅)
63
L4
15
L17
600
F gear + P2/T2 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
L6
mm
87
87
T1
498
22
G gear + P2/T2 motor
High
Low
6.3
1.1
6.3
1.1
6.3
1.1
6.3
1.1
L6*
mm
72
72
T2
498
22
Min R
mm
1200
1200
H gear + P3/T3 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
Weight
kg
225
235
T3
498
22
H1
WB
W min
W max
574
L5
1096
L18
212
820
L7
376
L19
138
50
L8
265
70
L9
90
L10
411
L11
410
L12
549
L13
548
D002081_A
062127
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
Note: Min R with second brake
Note: Standard rail gauges: 1200, 1400, 1700 and 2000.
* Please, disregard the dimension L6*.
English
30/12/2011
33 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NB, REEVING: 04
English
30/12/2011
34 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
14 DOUBLE GIRDER HOIST NC, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
2000
3m/M6
2500
2m/M5
3200
1Am/M4
E gear + P3/T3 motor
High
Low
8
1.3
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
12
B
18
C
24
D
30
E
M1
mm
467
567
667
787
M2
mm
252
252
352
352
Motor dimensions
Motor
P3
M3 (mm)
597
Weight (kg)
35
P4
690
53
T3
507
22
Trolley dimensions
C
D1 (∅
∅)
360
L1
83
L13
138
90
L2
324
L14
158
D2 (∅
∅)
120
L3
250
L15
600
D3 (∅
∅)
63
L4
12
L16
138
F gear + P3/T3 motor
High
Low
10
1.7
10
1.7
-
H1
mm
459
459
559
559
H2
mm
95
144
193
252
Min R
mm
1200
1200
1400
1400
H gear + P4/T4 motor
High
Low
16
2.7
16
2.7
-
L18
mm
119
119
119
119
L18*
mm
103
103
103
103
Weight
kg
310
320
335
350
T4
610
45
WB
W min
W max
1010
L5
1286
L17
212
50
L6
427
70
L7
301
L8
90
L9
482
L10
528
L11
620
L12
666
D002088_A
062138
Note: Weight calculated with P3 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700 and 2000.
* Please, disregard the dimension L18*.
English
30/12/2011
35 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NC, REEVING: 02
English
30/12/2011
36 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
15 DOUBLE GIRDER HOIST NC, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
6300
1Am/M4
High
4
4
4
E gear + P3/T3 motor
Low
0.7
0.7
0.7
Hoist dimensions
HOL
Length
m
code
6
B
9
C
12
D
15
E
M1
mm
467
567
667
787
M2
mm
252
252
352
352
Motor dimensions
Motor
P3
M3 (mm)
597
Weight (kg)
35
P4
690
53
T3
507
22
Trolley dimensions
C1
C2
350
L1
83
L13
138
447
L2
324
L14
158
D1 (∅
∅)
90
L3
250
L15
600
D2 (∅
∅)
120
L4
12
L16
212
D3 (∅
∅)
63
L5
1286
L17
138
High
5
5
-
H1
mm
537
537
637
637
F gear + P3/T3 motor
Low
0.8
0.8
-
H2
mm
49
74
99
129
Min R
mm
1200
1200
1400
1400
H gear + P4/T4 motor
High
Low
8
1.3
8
1.3
-
L18
mm
119
119
119
119
L18*
mm
103
103
103
103
Weight
kg
315
325
340
360
T4
610
45
WB
W min
W max
1010
L6
427
50
L7
301
70
L8
90
L9
505
L10
505
L11
643
L12
643
D002095_A
062139
Note: Weight calculated with P3 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700 and 2000.
* Please, disregard the dimension L18*.
English
30/12/2011
37 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NC, REEVING: 04
English
30/12/2011
38 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
16 DOUBLE GIRDER HOIST ND, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
6300
1Am/M4
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
18
D
24
E
32
F
40
G
M1
mm
697
817
967
1157
Motor dimensions
Motor
P5
M3 (mm)
722
Weight (kg)
58
P6
722
85
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
-
M2
mm
259
259
372
522
P7
762
105
H1
mm
558
558
671
821
T5
642
45
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
-
H2
mm
176
235
309
403
T6
722
65
L18
mm
30
30
30
30
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
-
L18*
mm
10
10
10
10
Min R
mm
1400
1400
1700
2000
Weight
kg
650
675
720
760
T7
722
71
Trolley dimensions
C
476
L1
430
L13
148
D1 (∅
∅)
110
L2
382
L14
128
D2 (∅
∅)
140
L3
400
L15
900
D3 (∅
∅)
63
L4
15
L16
148
WB
1080
L5
98
L17
255
W min
52
L6
1376
W max
87
L7
420
L8
100
L9
507
L10
573
L11
655
L12
721
D002113_A
005020
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700 and 2000.
* Please, disregard the dimension L18*.
English
30/12/2011
39 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 02
English
30/12/2011
40 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
17 DOUBLE GIRDER HOIST ND, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
5000
3m/M6
6300
3m/M6
8000
3m/M6
10000
2m/M5
12500
1Am/M4
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
9
D
12
E
16
F
20
G
M1
mm
697
817
967
1157
Motor dimensions
Motor
P5
M3 (mm)
722
Weight (kg)
58
P6
722
85
M2
mm
259
259
372
522
P7
762
105
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
-
H1
mm
640
640
753
903
T5
642
45
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
-
H2
mm
88
118
156
201
T6
722
65
L18
mm
30
30
30
30
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
-
L18*
mm
10
10
10
10
Min R
mm
1400
1400
1700
2000
Weight
kg
670
700
745
785
T7
722
71
Trolley dimensions
C1
421
L1
470
L13
148
C2
477
L2
382
L14
128
D1 (∅
∅)
110
L3
400
L15
900
D2 (∅
∅)
140
L4
15
L16
148
D3 (∅
∅)
63
L5
98
L17
255
WB
1080
L6
1376
W min
52
L7
420
W max
87
L8
100
L9
540
L10
540
L11
688
L12
688
D002119_A
005021
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700 and 2000.
* Please, disregard the dimension L18*.
English
30/12/2011
41 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 04
English
30/12/2011
42 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
18 DOUBLE GIRDER HOIST ND, REEVING: 06
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
6
D
8
E
10
F
13
G
M1
mm
558
678
828
1018
Motor dimensions
Motor
P5
MOT (mm)
578
Weight ( kg)
58
P6
578
85
M2
mm
678
828
1003
1183
P7
618
105
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
H1
mm
645
795
970
1150
T5
498
45
H2
mm
53
78
98
132
T6
578
65
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
Min R
mm
1400
1700
2000
2400
Weight
kg
760
805
850
915
T7
578
71
Trolley dimensions
C
790
RO
98
∅ BU
63
TD
94
BU
163
TH
430
BUH
100
E1
382
E2
1343
E3
18
GEA
143
WB
1080
∅ WD
140
W min
54
W max
84
D007194_A
124515
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: M2 and weight calculated with Min R.
English
30/12/2011
43 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 06
English
30/12/2011
44 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
19 DOUBLE GIRDER HOIST ND, REEVING: 08
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
D
6
E
8
F
10
G
M1
mm
558
678
828
1018
Motor dimensions
Motor
P5
MOT (mm)
578
Weight ( kg)
58
P6
578
85
M2
mm
678
828
1003
1183
P7
618
105
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
H1
mm
645
795
970
1150
T5
498
45
H2
mm
44
53
76
98
T6
578
65
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
Min R
mm
1400
1700
2000
2400
Weight
kg
770
815
865
925
T7
578
71
Trolley dimensions
C
520
RO
98
∅ BU
63
TD
20
BU
148
TH
692
BUH
100
E1
382
E2
1328
E3
15
GEA
143
WB
1080
∅ WD
110
W min
54
W max
84
D007195_A
124516
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400..
Note: M2 and weight calculated with Min R.
English
30/12/2011
45 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 08
English
30/12/2011
46 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
20 DOUBLE GIRDER HOIST ND, REEVING: 22
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
Hoist dimensions
HOL
Length
m
code
8.5
D
13
E
18
F
25
G
33.5
H
46
J
Motor dimensions
Motor
P5
MOT (mm)
578
Weight ( kg)
58
M1
mm
558
678
828
1018
1268
1618
P6
578
85
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
M2
mm
421
361
436
341
399
424
P7
618
105
BRA
mm
128
128
Min R
mm
1400
1400
1700
1700
2000
2400
T5
498
45
T6
578
65
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
Weight
kg
660
680
730
760
840
925
T7
578
71
Trolley dimensions
C
620
RO
98
∅ BU
63
TD
97
BU
148
TH
427
BUH
100
E1
382
E2
1328
E3
15
GEA
143
WB
1080
∅ WD
110
W min
52
W max
87
D007171_A
124132
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
Note: M2 and weight calculated with Min R.
English
30/12/2011
47 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 22
English
30/12/2011
48 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
21 DOUBLE GIRDER HOIST ND, REEVING: 24
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
8000
3m/M6
10000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
D
6.5
E
9
F
12.5
G
16.5
H
23
J
Motor dimensions
Motor
MOT (mm)
Weight ( kg)
P5
578
58
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
M1
mm
558
678
828
1018
1268
1618
P6
578
85
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
M2
mm
421
361
436
341
399
424
BRA
mm
128
128
P7
618
105
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
Min R
mm
1400
1400
1700
1700
2000
2400
T5
498
45
T6
578
65
Weight
kg
725
745
795
825
900
990
T7
578
71
Trolley dimensions
C
785
RO
98
∅ BU
63
TD
97
BU
148
TH
427
BUH
100
E1
382
E2
1328
E3
15
GEA
143
WB
1080
∅ WD
110
W min
52
W max
87
D007172_A
124133
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
Note: M2 and weight calculated with Min R.
English
30/12/2011
49 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 24
English
30/12/2011
50 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
22 DOUBLE GIRDER HOIST ND, REEVING: 26
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
E
6
F
8
G
11
H
15
J
Motor dimensions
Motor
P5
MOT (mm)
578
Weight ( kg)
58
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
M1
mm
678
828
1018
1268
1618
P6
578
85
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
M2
mm
361
436
341
399
424
BRA
mm
128
128
P7
618
105
T5
498
45
Min R
mm
1400
1700
1700
2000
2400
T6
578
65
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
Weight
kg
780
825
855
935
1020
T7
578
71
Trolley dimensions
C
785
RO
98
∅ BU
63
TD
94
BU
163
TH
430
BUH
100
E1
382
E2
1343
E3
18
GEA
143
WB
1080
∅ WD
140
W min
54
W max
84
D007173_A
124134
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
Note: M2 and weight calculated with Min R.
English
30/12/2011
51 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 26
English
30/12/2011
52 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
23 DOUBLE GIRDER HOIST ND, REEVING: 28
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
F
6
G
8
H
11.5
J
Motor dimensions
Motor
P5
MOT (mm)
578
Weight ( kg)
58
M1
mm
828
1018
1268
1618
P6
578
85
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
M2
mm
436
341
399
424
P7
618
105
BRA
mm
128
128
T5
498
45
Min R
mm
1700
1700
2000
2400
T6
578
65
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
Weight
kg
840
870
945
1030
T7
578
71
Trolley dimensions
C
785
RO
98
∅ BU
63
TD
94
BU
163
TH
430
BUH
100
E1
382
E2
1343
E3
18
GEA
143
WB
1080
∅ WD
140
W min
54
W max
84
D007174_A
124135
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
Note: M2 and weight calculated with Min R.
English
30/12/2011
53 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 28
English
30/12/2011
54 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
24 DOUBLE GIRDER HOIST NE, REEVING: 02
Hoisting Speed (m/min)
Load
kg
6300
8000
10000
E gear
High
Low
8
1.3
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist Dimensions
HOL
HOL*
m
m
15.5
10
21
15.5
28
22.5
36
30.5
47
41.5
61
55.5
80.5
75
97
91.5
*HOL with drum brake
Motor Dimensions
Motor
M2 (mm)
Weight (kg)
Length
code
C
D
E
F
G
H
J
K
P6
536
85
F gear
High
Low
10
1.7
P6/T6 motor
P6/T6 motor
P7/T7 motor
M1
mm
462
562
682
832
1022
1272
1622
1922
P7
576
105
M3
mm
714
799
799
949
1149
1469
1559
1944
G gear
High
Low
12.5
2.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
H1
mm
654
739
739
889
1089
1409
1499
1884
P8
711
106
H gear
High
Low
16
T8 motor
T8 motor
T9 motor
H2
mm
139
188
251
322
421
546
721
868
T6
536
65
T7
536
71
J gear
High
Low
20
T9 motor
T9 motor
TA motor
Min R
mm
1400
1700
1700
2000
2400
3100
3400
4200
Max R
mm
1400
2700
3100
3100
3100
3800
4200
4200
Weight
kg
1250
1320
1370
1460
1570
1750
1950
2200
T8
536
81
T9
536
92
TA
576
106
L1
1842
L2
100.5
Trolley Dimensions
C
892
E1
488
L3
87
D1 (∅
∅)
140
E2
600
L4
707
D2 (∅
∅)
170
E3
18
L5
628
D3 (∅
∅)
63
E4
1000
L6
100
WB
1500
E5
253
L7
163
W min
54
E6
173
M4
472
W max
84
H3
757
M5
44
H4
743
M6
218
H5
920
H6
906
D006647_A
090649
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: H1, M3 and weight calculated with min R.
English
30/12/2011
55 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NE, REEVING: 02
English
30/12/2011
56 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
25 DOUBLE GIRDER HOIST NE, REEVING: 04
Hoisting Speed (m/min)
Load
kg
12500
16000
20000
E gear
High
Low
4
0.7
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist Dimensions
HOL
HOL*
m
m
7.5
4.5
10.5
7.5
14
11
18
15
23.5
20.5
30.5
27.5
40
37
48.5
45.5
*HOL with drum brake
Motor Dimensions
Motor
M2 (mm)
Weight (kg)
Length
code
C
D
E
F
G
H
J
K
P6
536
85
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
M1
mm
462
562
682
832
1022
1272
1622
1922
P7
576
105
M3
mm
714
799
799
949
1149
1469
1559
1944
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
H1
mm
654
739
739
889
1089
1409
1499
1884
P8
711
106
T6
536
65
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
J gear
High
Low
10
T9 motor
T9 motor
TA motor
H2
mm
69
94
125
161
210
273
360
434
Min R
mm
1400
1700
1700
2000
2400
3100
3400
4200
Max R
mm
1400
2700
3100
3100
3100
3800
4200
4200
T7
536
71
T8
536
81
T9
536
92
Weight
kg
1290
1360
1410
1500
1620
1790
2000
2240
TA
576
106
Trolley Dimensions
C
892
E1
488
L3
87
D1 (∅
∅)
140
E2
600
L4
707
D2 (∅
∅)
170
E3
18
L5
628
D3 (∅
∅)
63
E4
1000
L6
100
WB
1500
E5
253
L7
163
W min
54
E6
173
M4
472
W max
84
H3
757
M5
44
H4
743
M6
218
H5
920
H6
906
L1
1842
L2
100.5
D006648_A
090650
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: H1, M3 and weight calculated with min R.
English
30/12/2011
57 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NE, REEVING: 04
English
30/12/2011
58 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
26 DOUBLE GIRDER HOIST NE, REEVING: 06
Hoisting Speed (m/min)
Load
kg
20000
25000
30000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
E gear
High
Low
2.5
0.4
P6/T6 motor
P6/T6 motor
P6/T6 motor
Hoist Dimensions
HOL
HOL*
m
m
5
3
7
5
9
7
12
10
15.5
13.5
20
18
26.5
24.5
32
30
*HOL with drum brake
Motor Dimensions
Motor
M2 (mm)
Weight (kg)
Length
code
C
D
E
F
G
H
J
K
P6
536
85
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
M1
mm
462
562
682
832
1022
1272
1622
1922
P7
576
105
M3
mm
714
799
799
949
1149
1469
1559
1944
P8
711
106
G gear
High
Low
4
0.7
P7/T7 motor
P7/T7 motor
P8/T8 motor
H1
mm
654
739
739
889
1089
1409
1499
1884
T6
536
65
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
H2
mm
46
63
84
107
140
182
240
289
Min R
mm
1400
1700
1700
2000
2400
3100
3400
4200
T7
536
71
J gear
High
Low
6.3
T9 motor
T9 motor
TA motor
Max R
mm
1400
2700
3100
3100
3100
3800
4200
4200
T8
536
81
T9
536
92
Weight
kg
1570
1650
1700
1800
1940
2210
2430
2820
TA
576
106
Trolley Dimensions
C
949
E1
488
L3
105
D1 (∅
∅)
200
E2
600
L4
707
D2 (∅
∅)
230
E3
80
L5
690
D3 (∅
∅)
80
E4
1000
L6
100
WB
1410
E5
253
L7
226
W min
54
E6
173
M4
512
W max
99
H3
712
M5
44
H4
698
M6
218
H5
938
H6
924
L1
1862
L2
122
D006649_A
090651
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: H1, M3 and weight calculated with min R.
English
30/12/2011
59 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NE, REEVING: 06
English
30/12/2011
60 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
27 DOUBLE GIRDER HOIST NE, REEVING: 08
Hoisting Speed (m/min)
Load
kg
32000
40000
Class
Fem/ISO
2m/M5
1Am/M4
E gear
High
Low
2
0.3
P6/T6 motor
P6/T6 motor
Hoist Dimensions
HOL
HOL*
m
m
7
5.5
9
7.5
11.5
10
15
13.5
20
18.5
24
22.5
*HOL with drum brake
Motor Dimensions
Motor
M2 (mm)
Weight (kg)
Length
code
E
F
G
H
J
K
P6
536
85
F gear
High
Low
2.5
0.4
P7/T7 motor
P7/T7 motor
M1
mm
682
832
1022
1272
1622
1922
P7
576
105
G gear
High
Low
3.2
0.5
P8/T8 motor
M3
mm
799
949
1149
1469
1559
1944
P8
711
106
G gear
High
Low
3.2
T8 motor
-
H1
mm
739
889
1089
1409
1499
1884
T6
536
65
H2
mm
63
81
105
137
180
217
H gear
High
Low
4
T9 motor
T9 motor
Min R
mm
1700
2000
2400
3100
3400
4200
T7
536
71
H gear
High
Low
5
TA motor
TA motor
Max R
mm
3100
3100
3100
3800
4200
4200
T8
536
81
T9
536
92
Weight
kg
1780
1880
2010
2280
2510
2890
TA
576
106
Trolley Dimensions
C
1165
E1
488
L3
105
D1 (∅
∅)
200
E2
600
L4
707
D2 (∅
∅)
230
E3
80
L5
690
D3 (∅
∅)
80
E4
1000
L6
100
WB
1410
E5
253
L7
226
W min
54
E6
173
M4
512
W max
99
H3
712
M5
44
H4
698
M6
218
H5
938
H6
924
L1
1862
L2
122
D006650_A
090652
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Min R with service platform.
Note: Standard rail gauges: 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: H1, M3 and weight calculated with min R.
English
30/12/2011
61 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NE, REEVING: 08
English
30/12/2011
62 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
28 DOUBLE GIRDER HOIST NE, REEVING: 22
Hoisting Speed (m/min)
Load
kg
6300
8000
10000
E gear
High
Low
8
1.3
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist Dimensions
HOL
HOL*
m
m
16.5
9
22
14.5
29.5
22
39
31.5
52
44.5
63.5
56
77
69.5
86.5
79
98
90.5
*HOL with drum brake
Motor Dimensions
Motor
M2 (mm)
Weight (kg)
P6
536
85
F gear
High
Low
10
1.7
P6/T6 motor
P6/T6 motor
P7/T7 motor
Length
code
E
F
G
H
J
K
L
M
N
G gear
High
Low
12.5
2.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
M1
mm
682
832
1022
1272
1622
1922
2272
2522
2822
P7
576
105
P8
711
106
M3
mm
359
434
339
364
389
389
414
439
489
T6
536
65
H gear
High
Low
16
T8 motor
T8 motor
T9 motor
Min R
mm
1400
1700
1700
2000
2400
2700
3100
3400
3800
T7
536
71
J gear
High
Low
20
T9 motor
T9 motor
TA motor
Max R
mm
2000
2400
2700
3100
3400
3400
3400
3800
4200
T8
536
81
Weight
kg
1310
1380
1440
1560
1720
1890
2090
2240
2430
T9
536
92
TA
576
106
Trolley Dimensions
C
807
E1
488
L3
111
D1 (∅
∅)
140
E2
600
L4
707
D2 (∅
∅)
170
E3
18
L5
627
D3 (∅
∅)
63
E4
1000
L6
100
WB
1500
E5
253
L7
163
W min
54
E6
173
M4
472
W max
84
H3
757
M5
44
H4
743
M6
218
H5
920
H6
906
L1
1834
L2
100.5
D006651_A
090653
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Min R with service platform.
Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: M3 and weight calculated with min R.
English
30/12/2011
63 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NE, REEVING: 22
English
30/12/2011
64 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
29 DOUBLE GIRDER HOIST NE, REEVING: 24
Hoisting Speed (m/min)
Load
kg
12500
16000
20000
E gear
High
Low
4
0.7
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist Dimensions
HOL
HOL*
m
m
8
4
11
7
14.5
10.5
19.5
15.5
26
22
31.5
27.5
38.5
34.5
43
39
49
45
*HOL with drum brake
Motor Dimensions
Motor
M2 (mm)
Weight (kg)
P6
536
85
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
Length
code
E
F
G
H
J
K
L
M
N
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
M1
mm
682
832
1022
1272
1622
1922
2272
2522
2822
P7
576
105
P8
711
106
M3
mm
359
434
339
364
389
389
414
439
489
T6
536
65
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
Min R
mm
1400
1700
1700
2000
2400
2700
3100
3400
3800
T7
536
71
J gear
High
Low
10
T9 motor
T9 motor
TA motor
Max R
mm
2000
2400
2700
3100
3400
3400
3400
3800
4200
T8
536
81
Weight
kg
1380
1450
1520
1640
1800
1970
2170
2320
2510
T9
536
92
TA
576
106
Trolley Dimensions
C
1115
E1
488
L3
111
D1 (∅
∅)
140
E2
600
L4
707
D2 (∅
∅)
170
E3
18
L5
627
D3 (∅
∅)
63
E4
1000
L6
100
WB
1500
E5
253
L7
163
W min
54
E6
173
M4
472
W max
84
H3
757
M5
44
H4
743
M6
218
H5
920
H6
906
L1
1834
L2
100.5
D006652_A
090654
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: M3 and weight calculated with the Min R.
English
30/12/2011
65 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NE, REEVING: 24
English
30/12/2011
66 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
30 DOUBLE GIRDER HOIST NE, REEVING: 26
Hoisting Speed (m/min)
Load
kg
20000
25000
30000
E gear
High
Low
2.5
0.4
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist Dimensions
HOL
HOL*
m
m
5.5
3
7
4.5
9.5
7
13
10.5
17
14.5
21
18.5
25.5
23
28.5
26
32.5
30
*HOL with drum brake
Motor Dimensions
Motor
M2 (mm)
Weight (kg)
P6
536
85
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
Length
code
E
F
G
H
J
K
L
M
N
G gear
High
Low
4
0.7
P7/T7 motor
P7/T7 motor
P8/T8 motor
M1
mm
682
832
1022
1272
1622
1922
2272
2522
2822
P7
576
105
P8
711
106
M3
mm
359
434
339
364
389
389
414
439
489
T6
536
65
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
Min R
mm
1400
1700
1700
2000
2400
2700
3100
3400
3800
T7
536
71
J gear
High
Low
6.3
T9 motor
T9 motor
TA motor
Max R
mm
2000
2400
2700
3100
3400
3400
3400
3800
4200
T8
536
81
Weight
kg
1650
1730
1800
1920
2100
2280
2490
2660
2870
T9
536
92
TA
576
106
Trolley Dimensions
C
1154
E1
488
L3
129
D1 (∅
∅)
200
E2
600
L4
707
D2 (∅
∅)
230
E3
80
L5
690
D3 (∅
∅)
80
E4
1000
L6
100
WB
1410
E5
253
L7
226
W min
54
E6
173
M4
512
W max
99
H3
712
M5
44
H4
698
M6
218
H5
938
H6
924
L1
1852
L2
122
D006653_A
090655
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Min R with service platform.
Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: M3 and weight calculated wit the Min R.
English
30/12/2011
67 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NE, REEVING: 26
English
30/12/2011
68 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
31 DOUBLE GIRDER HOIST NE, REEVING: 28
Hoisting Speed (m/min)
Load
kg
32000
40000
Class
Fem/ISO
2m/M5
1Am/M4
E gear
High
Low
2
0.3
P6/T6 motor
P6/T6 motor
Hoist Dimensions
HOL
HOL*
m
m
5.5
3.5
7
5
9.5
7.5
13
11
15.5
13.5
19
17
21.5
19.5
24.5
22.5
*HOL with drum brake
Motor Dimensions
Motor
M2 (mm)
Weight (kg)
F gear
High
Low
2.5
0.4
P7/T7 motor
P7/T7 motor
Length
code
F
G
H
J
K
L
M
N
P6
536
85
G gear
High
Low
3.2
0.5
P8/T8 motor
M1
mm
832
1022
1272
1622
1922
2272
2522
2822
P7
576
105
P8
711
106
G gear
High
Low
3.2
T8 motor
-
M3
mm
434
339
364
389
389
414
439
489
T6
536
65
H gear
High
Low
4
T9 motor
T9 motor
Min R
mm
1700
1700
2000
2400
2700
3100
3400
3800
T7
536
71
H gear
High
Low
5
TA motor
TA motor
Max R
mm
2400
2700
3100
3400
3400
3400
3800
4200
T8
536
81
Weight
kg
1850
1920
2050
2230
2400
2620
2790
3010
T9
536
92
TA
576
106
Trolley Dimensions
C
1280
E1
488
L3
129
D1 (∅
∅)
200
E2
600
L4
707
D2 (∅
∅)
230
E3
80
L5
690
D3 (∅
∅)
80
E4
1000
L6
100
WB
1410
E5
253
L7
226
W min
54
E6
173
M4
512
W max
99
H3
712
M5
44
H4
698
M6
218
H5
938
H6
924
L1
1852
L2
122
D006654_A
090656
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Min R with service platform.
Note: Standard rail gauges: 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: M3 and weight calculated with the Min R.
English
30/12/2011
69 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NE, REEVING: 28
English
30/12/2011
70 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
32 DOUBLE GIRDER HOIST NF, REEVING: 22
Hoisting Speed (m/min)
Load
kg
12500
16000
20000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
E gear
High
Low
8
1.2
P6/T6 motor
P6/T6 motor
P6/T6 motor
Hoist Dimensions
HOL
HOL*
m
m
15.5
9
20.5
14
27.5
21
37.5
31
46
39.5
55.5
49
62.5
56
71
64.5
*HOL with drum brake
Motor Dimensions
Motor
M2 (mm)
Weight (kg)
P6
536
85
F gear
High
Low
10
1.6
P6/T6 motor
P6/T6 motor
P7/T7 motor
Length
code
F
G
H
J
K
L
M
N
P7
576
105
G gear
High
Low
12.5
2
P7/T7 motor
P7/T7 motor
T8 motor
M1
mm
832
1022
1272
1622
1922
2272
2522
2822
T6
536
65
M3
mm
434
339
214
389
389
414
439
489
T7
536
71
H gear
High
Low
16
T8 motor
T8 motor
T9 motor
Min R
mm
1700
1700
2000
2400
2700
3100
3400
3800
T8
536
81
J gear
High
Low
20
T9 motor
T9 motor
-
Max R
mm
2400
2700
3100
3100
3100
3400
3800
4200
Weight
kg
1800
1950
2080
2270
2430
2620
2780
2970
T9
536
92
Trolley Dimensions
C
960
E1
488
L3
106
D1 (∅
∅)
200
E2
600
L4
707
D2 (∅
∅)
230
E3
80
L5
690
D3 (∅
∅)
80
E4
1000
L6
100
WB
1410
E5
305
L7
226
W min
54
E6
173
M4
512
W max
99
H3
712
M5
44
H4
698
M6
218
H5
938
H6
924
L1
1857
L2
122
D006655_A
090657
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Min R with service platform.
Note: Standard rail gauges: 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: M3 and weight calculated with min R.
English
30/12/2011
71 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NF, REEVING: 22
English
30/12/2011
72 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
33 DOUBLE GIRDER HOIST NF, REEVING: 24
Hoisting Speed (m/min)
Load
kg
25000
32000
40000
E gear
High
Low
4
0.6
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist Dimensions
HOL
HOL*
m
m
7.5
4
10
6.5
13.5
10
18.5
15
23
19.5
27.5
24
31
27.5
35.5
32
*HOL with drum brake
Motor Dimensions
Motor
P6
M2 (mm)
536
Weight (kg)
85
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
Length
code
F
G
H
J
K
L
M
N
P7
576
105
G gear
High
Low
6.3
1
P7/T7 motor
P7/T7 motor
T8 motor
M1
mm
832
1022
1272
1622
1922
2272
2522
2822
T6
536
65
M3
mm
434
339
214
389
389
414
439
489
T7
536
71
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
Min R
mm
1700
1700
2000
2400
2700
3100
3400
3800
T8
536
81
T9
536
92
W max
99
H3
712
M5
44
H4
698
M6
218
J gear
High
Low
10
T9 motor
T9 motor
-
Max R
mm
2400
2700
3100
3100
3100
3400
3800
4200
Weight
kg
2040
2200
2330
2530
2680
2880
3030
3230
Trolley Dimensions
C
1305
E1
488
L3
106
D1 (∅
∅)
200
E2
600
L4
707
D2 (∅
∅)
230
E3
80
L5
690
D3 (∅
∅)
80
E4
1000
L6
100
WB
1410
E5
305
L7
226
W min
54
E6
173
M4
512
H5
938
H6
924
L1
1857
L2
122
D006656_A
090658
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Min R with service platform.
Note: Standard rail gauges: 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: M3 and weight calculated with min R.
English
30/12/2011
73 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NF, REEVING: 24
English
30/12/2011
74 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
34 DOUBLE GIRDER HOIST NF, REEVING: 26
Hoisting Speed (m/min)
Load
kg
40000
50000
60000
E gear
High
Low
2.5
0.4
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist Dimensions
HOL
HOL*
m
m
5
2.5
6.5
4
9
6.5
12.5
10
15
12.5
18.5
16
20.5
18
23.5
21
*HOL with drum brake
Motor Dimensions
Motor
P6
M2 (mm)
536
Weight (kg)
85
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
Length
code
F
G
H
J
K
L
M
N
P7
576
105
G gear
High
Low
4
0.6
P7/T7 motor
P7/T7 motor
T8 motor
M1
mm
832
1022
1272
1622
1922
2272
2522
2822
T6
536
65
M3
mm
434
339
214
389
389
414
439
489
T7
536
71
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
Min R
mm
1700
1700
2000
2400
2700
3100
3400
3800
T8
536
81
T9
536
92
W max
89
H3
687
M5
44
H4
653
M6
218
J gear
High
Low
6.3
T9 motor
T9 motor
-
Max R
mm
2400
2700
3100
3100
3100
3400
3800
4200
Weight
kg
2530
2690
2830
3070
3310
3580
3790
4040
Trolley Dimensions
C
1354
E1
488
L3
117
D1 (∅
∅)
250
E2
600
L4
707
D2 (∅
∅)
280
E3
107
L5
717
D3 (∅
∅)
100
E4
1000
L6
150
WB
1340
E5
305
L7
262
W min
54
E6
173
M4
589
H5
949
H6
915
L1
1868
L2
125
D006657_A
090659
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Min R with service platform.
Note: Standard rail gauges: 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200.
Note: M3 and weight calculated with min R.
English
30/12/2011
75 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NF, REEVING: 26
English
30/12/2011
76 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
35 DOUBLE GIRDER HOIST NF, REEVING: 28
Hoisting Speed (m/min)
Load
kg
63000
80000
Class
Fem/ISO
2m/M5
1Am/M4
E gear
High
Low
2
0.3
P6/T6 motor
P6/T6 motor
Hoist Dimensions
HOL
HOL*
m
m
6.5
4.5
9
7
11
9
13.5
11.5
15.5
13.5
17.5
15.5
*HOL with drum brake
Motor Dimensions
Motor
P6
M2 (mm)
536
Weight (kg)
85
F gear
High
Low
2.5
0.4
P6/T6 motor
P7/T7 motor
Length
code
H
J
K
L
M
N
P7
576
105
G gear
High
Low
3.2
0.5
P7/T7 motor
T8 motor
M1
mm
1272
1622
1922
2272
2522
2822
T6
536
65
M3
mm
364
389
389
414
439
489
T7
536
71
H gear
High
Low
4
T8 motor
T9 motor
Min R
mm
2400
2400
2700
3100
3400
3800
T8
536
81
T9
536
92
W max
89
H3
687
M5
44
H4
733
M6
218
J gear
High
Low
5
T9 motor
-
Max R
mm
3100
3100
3100
3400
3800
4200
Weight
kg
3380
3610
3860
4140
4330
4590
Trolley Dimensions
C
1410
E1
488
L3
117
D1 (∅
∅)
250
E2
600
L4
707
D2 (∅
∅)
280
E3
142
L5
752
D3 (∅
∅)
100
E4
1000
L6
150
WB
1420
E5
305
L7
262
W min
54
E6
173
M4
589
H5
949
H6
995
L1
1867
L2
154
D006658_A
090660
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Min R with service platform.
Note: Standard rail gauges: 2400, 2700, 3100, 3400, 3800 and 4200.
Note: M3 and weight calculated with min R.
English
30/12/2011
77 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist NF, REEVING: 28
English
30/12/2011
78 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
36 TWO HOIST TROLLEY ND 04 + NC 02
Main hoist ND 04 hoisting speed (m/min)
Load
Class
E gear + P5 motor
kg
Fem/ISO
High
Low
6300
3m/M6
4
0.7
8000
3m/M6
4
0.7
10000
2m/M5
4
0.7
125000
1Am/M4
4
0.7
Main hoist ND 04 motor dimensions
Motor
P5
P6
M2 (mm)
567
567
Weight ( kg)
58
85
F gear + P5 motor
High
Low
5
0.8
5
0.8
5
0.8
-
J gear + P7 motor
High
Low
10
1.7
10
1.7
10
1.7
-
Main hoist ND 04 cover plate dimensions
L6
L13
L6*
L13*
542
28
522
48
P7
607
105
Auxiliary hoist NC 02 hoisting speed (m/min)
Load
Class
E gear + P3 motor
kg
Fem/ISO
High
Low
2000
3m/M6
8
1.3
2500
2m/M5
8
1.3
3200
1Am/M4
8
1.3
Auxiliary hoist NC 02 motor dimensions
Motor
P3
P4
M1 (mm)
449
542
Weight ( kg)
35
53
H gear + P6 motor
High
Low
8
1.3
8
1.3
8
1.3
-
F gear + P3 motor
High
Low
10
1.7
10
1.7
-
H gear + P4 motor
High
Low
16
2.7
16
2.7
-
Auxiliary hoist NC 02 cover plate dimensions
L7
L8
L15
L7*
1813
510
60
1849
Hoist dimensions (main hoist ND 04 + auxiliary hoist NC 02)
HOL1
HOL2
Drum
ND 04
NC 02
Min R
Max R
H1
lengths
m
m
mm
mm
mm
D+B
9
9
1400
2000
640
E+B
12
12
1400
2000
640
H2
mm
88
118
H3
mm
559
559
H4
mm
95
95
M3
mm
408
408
L8*
494
M4
mm
472
472
L15*
76
Weight
Min R
Weight
Max R
kg
880
900
kg
980
1000
L16
455
L28
85
L17
305
L29
163
Trolley dimensions
C1
553
L1
432
L18
618
L30
121
C2
404
L2
432
L19
468
L31
346
D1 (∅
∅)
140
L3
400
L20
712
D2 (∅
∅)
170
L4
18
L21
380
HTH
640
L5
100
L22
149
WB
1400
L9
423
L23
548
WW
min
50
L10
337
L24
163
WW
max
85
L11
108
L25
69
L12
87
L26
300
L14
90
L27
1217
D004568_A
063932
Note: Weight calculated with smallest P motor.
Note: All dimensions in mm.
Note: Standard rail gauges: 1400, 1700 and 2000.
Note: H- and M- dimensions with min R.
*Please, disregard the dimensions L6*, L7*, L8*, L13* and L15*.
English
30/12/2011
79 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley ND 04 + NC 02
Note.1: travelling machinery inside when R=>1700.
Note.2: travelling machinery inside when R=>2000.
English
30/12/2011
80 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
37 TWO HOIST TROLLEY ND 04 + NC 04
Main hoist ND 04 hoisting speed (m/min)
Load
Class
E gear + P5 motor
kg
Fem/ISO
High
Low
6300
3m/M6
4
0.7
8000
3m/M6
4
0.7
10000
2m/M5
4
0.7
12500
1Am/M4
4
0.7
Main hoist ND 04 motor dimensions
Motor
P5
P6
M2 (mm)
567
567
Weight ( kg)
58
85
F gear + P5 motor
High
Low
5
0.8
5
0.8
5
0.8
-
J gear + P7 motor
High
Low
10
1.7
10
1.7
10
1.7
-
Main hoist ND 04 cover plate dimensions
L6
L13
L6*
L13*
541
28
521
48
P7
607
105
Auxiliary hoist NC 04 hoisting speed (m/min)
Load
Class
E gear + P3 motor
kg
Fem/ISO
High
Low
4000
3m/M6
4
0.7
5000
2m/M5
4
0.7
6300
1Am/M4
4
0.7
Auxiliary hoist NC 04 motor
dimensions
Motor
P3
M1 (mm)
449
Weight ( kg)
35
H gear + P6 motor
High
Low
8
1.3
8
1.3
8
1.3
-
F gear + P3 motor
High
Low
5
0.8
5
0.8
-
H gear + P4 motor
High
Low
8
1.3
8
1.3
-
Auxiliary hoist NC 04 cover plate dimensions
P4
542
53
L7
1814
Hoist dimensions (main hoist ND 04 + auxiliary hoist
HOL1
HOL2
Drum
ND 04
NC 04
Min R
Max R
lengths
m
m
mm
mm
D+C
9
9
1400
2000
E+D
12
12
1400
2000
L8
510
L15
60
L7*
1850
L8*
494
L15*
76
M3
mm
408
408
M4
mm
472
472
Weight
Min R
kg
910
930
Weight
Max R
kg
1010
1030
L16
455
L28
85
L17
327
L29
163
NC 04)
H1
mm
640
640
H2
mm
88
118
H3
mm
637
637
H4
mm
74
99
Trolley dimensions
C1
553
L1
432
L18
618
L30
121
C2
385
L2
432
L19
490
L31
446
D1 (∅
∅)
140
L3
400
L20
712
D2 (∅
∅)
170
L4
18
L21
380
HTH
618
L5
100
L22
149
WB
1400
L9
423
L23
548
WW
min
50
L10
337
L24
163
WW
max
85
L11
103
L25
69
L12
87
L26
300
L14
90
L27
1217
D004558_A
063934
Note: Weight calculated with P3 motor.
Note: All dimensions in mm.
Note: Standard rail gauges: 1400, 1700 and 2000.
Note: H- and M- dimensions with min R.
*Please, disregard the dimensions L6*, L7*, L8*, L13* and L15*.
English
30/12/2011
81 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley ND 04 + NC 04
English
30/12/2011
82 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
38 TWO HOIST TROLLEY NE 04 + NC 02
Main hoist NE 04 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
4
0.7
12500
3m/M6
P6/T6 motor
16000
2m/M5
P6/T6 motor
20000
1Am/M4
P6/T6 motor
Main hoist NE 04 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
P8
711
106
T6
536
65
Auxiliary hoist NC 02 hoisting speed (m/min)
Load
Class
E gear + P3 motor
kg
Fem/ISO
High
Low
2000
3m/M6
8
1.3
2500
2m/M5
8
1.3
3200
1Am/M4
8
1.3
Auxiliary hoist NC 02 motor dimensions
Motor
P3
P4
M1 (mm)
449
542
Weight ( kg)
35
53
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
T7
536
71
T8
536
81
F gear + P3 motor
High
Low
10
1.7
10
1.7
-
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
T9
536
92
J gear
High
Low
10
T9 motor
T9 motor
TA motor
TA
576
106
H gear + P4 motor
High
Low
16
2.7
16
2.7
-
Auxiliary hoist NC 02 cover plate dimensions
L17
L17*
41
25
Hoist dimensions (main hoist NE 04 + auxiliary hoist NC 02)
HOL1
HOL2
Drum
NE 04
NC 02
Min R
Max R
H1
lengths
m
m
mm
mm
mm
D+B
10.5
12
1700
2400
788
E+C
14
18
1700
2700
788
F+C
18
18
2000
2700
931
H2
mm
94
125
161
H3
mm
709
709
859
H4
mm
95
144
144
M3
mm
784
784
934
M4
mm
622
622
772
Weight
Min R
kg
1550
1850
1950
Weight
Max R
kg
1800
2200
2250
Trolley dimensions
C1
922
L1
514
L13
400
L26
213
C2
439
L2
514
L14
648
L27
480
D1(∅
∅)
200
L3
600
L15
55
L28
1013
D2(∅
∅)
230
L4
3
L16
25
L29
154
HTH
752
L5
123
L18
532
L30
188
WB
1800
L6
541
L19
692
L31
213
WW
min
55
L7
2251
L20
356
L32
256
WW
max
100
L8
503
L21
905
L33
221
L9
612
L22
569
L34
179
L10
88
L23
478
L35
600
L11
97
L24
562
L36
121
L12
25
L25
218
L37
346
D004578_A
063871
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: Standard rail gauges: 1700, 2000, 2400 and 2700.
Note: H- and M- dimensions with min R.
* Please, disregard the dimension L17*.
English
30/12/2011
83 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NE 04 + NC 02
Note.1: Travelling machinery inside when R=>2400
English
30/12/2011
84 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
39 TWO HOIST TROLLEY NE 04 + NC 04
Main hoist NE 04 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
4
0.7
12500
3m/M6
P6/T6 motor
16000
2m/M5
P6/T6 motor
20000
1Am/M4
P6/T6 motor
Main hoist NE 04 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
P8
711
106
T6
536
65
Auxiliary hoist NC 04 hoisting speed (m/min)
Load
Class
E gear + P3 motor
kg
Fem/ISO
High
Low
4000
3m/M6
4
0.7
5000
2m/M5
4
0.7
6300
1Am/M4
4
0.7
Auxiliary hoist NC 04 motor dimensions
Motor
P3
P4
M1 (mm)
449
542
Weight ( kg)
35
53
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
T7
536
71
T8
536
81
F gear + P3 motor
High
Low
5
0.8
5
0.8
-
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
T9
536
92
J gear
High
Low
10
T9 motor
T9 motor
TA motor
TA
576
106
H gear + P4 motor
High
Low
8
1.3
8
1.3
-
Auxiliary hoist NC 04 cover plate dimensions
L16
L16*
41
25
Hoist dimensions (main hoist NE 04 + auxiliary hoist NC 04)
HOL1
HOL2
Drum
NE 04
NC 04
Min R
Max R
H1
lengths
m
m
mm
mm
mm
D+D
10.5
12
1700
2400
788
E+E
14
15
1700
2700
788
H2
mm
94
125
H3
mm
787
787
H4
mm
99
129
M3
mm
784
784
M4
mm
622
622
Weight
Min R
kg
1600
1850
Weight
Max R
kg
2050
2250
Trolley dimensions
C1
922
L1
514
L13
643
L26
480
C2
430
L2
514
L14
55
L27
1013
D1(∅
∅)
200
L3
600
L15
25
L28
154
D2(∅
∅)
230
L4
3
L17
692
L29
188
HTH
730
L5
123
L18
378
L30
130
WB
1800
L6
541
L19
905
L31
213
WW
min
55
L7
2251
L20
591
L32
256
WW
max
100
L8
502
L21
478
L33
503
L9
612
L22
562
L34
179
L10
97
L23
218
L35
121
L11
88
L24
213
L36
600
L12
25
L25
522
L37
546
D004577_A
063870
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: Standard rail gauges: 1700, 2000, 2400 and 2700.
Note: H- and M- dimensions with min R.
* Please, disregard the dimension L16*.
English
30/12/2011
85 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NE 04 + NC 04
Note.1: travelling machinery inside when R=>2000.
Note.2: travelling machinery inside when R=>2000.
English
30/12/2011
86 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
40 TWO HOIST TROLLEY NE 04 + ND 02
Main hoist NE 04 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
4
0.7
12500
3m/M6
P6/T6 motor
16000
2m/M5
P6/T6 motor
20000
1Am/M4
P6/T6 motor
Main hoist NE 04 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
P8
711
106
T6
536
65
Auxiliary hoist ND 02 hoisting speed (m/min)
Load
Class
E gear + P5/T5 motor
kg
Fem/ISO
High
Low
4000
3m/M6
8
1.3
5000
2m/M5
8
1.3
6300
1Am/M4
8
1.3
T7
536
71
P5
567
58
P6
567
85
T8
536
81
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
-
Auxiliary hoist ND 02 motor dimensions
Motor
M1 (mm)
Weight ( kg)
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
T9
536
92
TA
576
106
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
-
Auxiliary hoist ND 02 cover plate
dimensions
L8
L16
L8*
561
42
541
P7
607
105
Hoist dimensions (main hoist NE 04 + auxiliary hoist ND 02)
HOL1
HOL2
Drum
NE 04
ND 02
Min R
Max R
H1
lengths
m
m
mm
mm
mm
F+D
18
18
2000
2700
931
H2
mm
161
H3
mm
858
H4
mm
176
J gear
High
Low
10
T9 motor
T9 motor
TA motor
M3
mm
934
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
-
L16*
62
M4
mm
708
Weight
Min R
kg
2150
Weight
Max R
kg
2500
L11
97
L24
218
L12
25
L25
213
L13
643
L26
1013
Trolley dimensions
C1
922
L1
123
L14
55
L27
201
C2
627
L2
478
L15
22
L28
213
D1 (∅
∅)
200
L3
600
L17
532
L29
256
D2 (∅
∅)
230
L4
3
L18
692
L30
216
HTH
748
L5
514
L19
360
L31
192
WB
1800
L6
541
L20
905
L32
149
WW
min
55
L7
2272
L21
573
L33
548
WW
max
100
L9
612
L22
478
L34
600
L10
88
L23
832
D004576_A
063869
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: Standard rail gauges: 2000, 2400 and 2700.
Note: H- and M- dimensions with min R.
* Please, disregard the dimensions L8* and L16*.
English
30/12/2011
87 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NE 04 + ND 02
English
30/12/2011
88 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
41 TWO HOIST TROLLEY NE 04 + ND 04
Main hoist NE 04 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
4
0.7
12500
3m/M6
P6/T6 motor
16000
2m/M5
P6/T6 motor
20000
1Am/M4
P6/T6 motor
Main hoist NE 04 motor
Motor
M2 (mm)
Weight ( kg)
dimensions
P6
536
85
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
P7
576
105
P8
711
106
Auxiliary hoist ND 04 hoisting speed (m/min)
Load
Class
E gear + P5 motor
kg
Fem/ISO
High
Low
6300
3m/M6
4
0.7
8000
3m/M6
4
0.7
10000
2m/M5
4
0.7
12500
1Am/M4
4
0.7
Auxiliary hoist ND 04 motor dimensions
Motor
P5
P6
M1 (mm)
567
567
Weight ( kg)
58
85
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
T6
536
65
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
T7
536
71
F gear + P5 motor
High
Low
5
0.8
5
0.8
5
0.8
-
T8
536
81
J gear
High
Low
10
T9 motor
T9 motor
TA motor
T9
536
92
H gear + P6 motor
High
Low
8
1.3
8
1.3
8
1.3
-
TA
576
106
J gear + P7 motor
High
Low
10
1.7
10
1.7
10
1.7
-
Auxiliary hoist ND 04 cover plate dimensions
L8
L16
L8*
L16*
561
42
541
62
P7
607
105
Hoist dimensions (main hoist NE 04 + auxiliary hoist ND 04)
HOL1
HOL2
Drum
NE 04
ND 04
Min R
Max R
H1
lengths
m
m
mm
mm
mm
D+E
10.5
12
1700
2400
788
E+F
14
16
1700
2700
788
F+G
18
20
2000
2700
931
H2
mm
94
125
161
H3
mm
790
753
903
H4
mm
118
156
204
M3
mm
784
784
934
M4
mm
558
521
671
Weight
Min R
kg
2050
2100
2250
Weight
Max R
kg
2350
2550
2650
Trolley dimensions
C1
922
L4
3
L18
692
L30
143
C2
564
L5
123
L19
391
L31
213
D1 (∅
∅)
200
L6
541
L20
905
L32
256
D2 (∅
∅)
230
L7
2272
L21
604
L33
498
HTH
717
L9
612
L22
478
L34
192
WB
1800
L10
88
L23
562
L35
668
WW
min
55
L11
97
L24
218
L36
600
WW
max
100
L12
25
L25
213
L37
149
L13
643
L26
480
L1
L2
L3
514
L14
55
L27
104
514
L15
22
L28
1013
600
L17
532
L29
201
D004575_A
063868
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: Standard rail gauges: 1700, 2000, 2400 and 2700.
Note: H- and M- dimensions with min R.
* Please, disregard the dimensions L8* and L16*.
English
30/12/2011
89 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NE 04 + ND 04
Note.1: travelling machinery inside when R=>2000.
Note.2: travelling machinery inside when R=>2400.
English
30/12/2011
90 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
42 TWO HOIST TROLLEY NE 06 + NC 04
Main hoist NE 06 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
4
0.7
20000
3m/M6
P6/T6 motor
25000
2m/M5
P6/T6 motor
30000
1Am/M4
P6/T6 motor
Main hoist NE 06 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
P8
711
106
T6
536
65
Auxiliary hoist NC 04 hoisting speed (m/min)
Load
Class
E gear + P3 motor
kg
Fem/ISO
High
Low
4000
3m/M6
4
0.7
5000
2m/M5
4
0.7
6300
1Am/M4
4
0.7
Auxiliary hoist NC 04 motor dimensions
Motor
P3
P4
M1 (mm)
449
542
Weight ( kg)
35
53
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
T7
536
71
T8
536
81
F gear + P3 motor
High
Low
5
0.8
5
0.8
-
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
T9
536
92
J gear
High
Low
10
T9 motor
T9 motor
TA motor
TA
576
106
H gear + P4 motor
High
Low
8
1.3
8
1.3
-
Auxiliary hoist NC 04 cover plate dimensions
L17
L17*
41
25
Hoist dimensions (main hoist NE 06 + auxiliary hoist NC 04)
HOL1
HOL2
Drum
NE 06
NC 04
Min R
Max R
H1
lengths
m
m
mm
mm
mm
D+C
7
9
1700
2400
810
E+C
9
9
1700
2700
810
F+D
12
12
2000
2700
936
G+E
15.5
15
2400
2700
1117
H2
mm
63
84
107
140
H3
mm
787
787
937
1137
H4
mm
74
74
99
129
M3
mm
784
784
934
1134
M4
mm
622
622
772
972
L12
25
L25
218
L37
446
L1
514
L13
643
L26
213
L38
121
Weight
Min R
kg
1850
1900
2050
2250
Weight
Max R
kg
2250
2300
2350
2400
L2
514
L14
55
L27
480
L3
600
L15
402
L28
522
Trolley dimensions
C1
1062
L4
3
L16
25
L29
154
C2
430
L5
123
L18
532
L30
1013
D1 (∅
∅)
200
L6
541
L19
713
L31
188
D2 (∅
∅)
230
L7
2251
L20
378
L32
256
HTH
709
L8
502
L21
926
L33
213
WB
1800
L9
612
L22
591
L34
221
WW
min
55
L10
97
L23
478
L35
179
WW
max
100
L11
88
L24
562
L36
600
D004580_A
063873
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: Standard rail gauges: 1700, 2000, 2400 and 2700.
Note: H- and M- dimensions with min R.
* Please, disregard the dimension L17*.
English
30/12/2011
91 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NE 06 + NC 04
Note.1: travelling machinery inside when R=>2000.
Note.2: travelling machinery inside when R=>2400.
English
30/12/2011
92 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
43 TWO HOIST TROLLEY NE 06 + ND 04
Main hoist NE 06 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
2.5
0.4
20000
3m/M6
P6/T6 motor
25000
2m/M5
P6/T6 motor
30000
1Am/M4
P6/T6 motor
Main hoist NE 06 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
P8
711
106
T6
536
65
Auxiliary hoist ND 04 hoisting speed (m/min)
Load
Class
E gear + P5 motor
kg
Fem/ISO
High
Low
6300
3m/M6
4
0.7
8000
3m/M6
4
0.7
10000
2m/M5
4
0.7
12500
1Am/M4
4
0.7
T7
536
71
P5
567
58
P6
567
85
T8
536
81
F gear + P5 motor
High
Low
5
0.8
5
0.8
5
0.8
-
Auxiliary hoist ND 04 motor dimensions
Motor
M1 (mm)
Weight ( kg)
G gear
High
Low
4
0.7
P7/T7 motor
P7/T7 motor
P8/T8 motor
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
T9
536
92
P7
607
105
Hoist dimensions (main hoist NE 06 + auxiliary hoist ND 04)
HOL1
HOL2
Drum
NE 06
ND 04
Min R
Max R
H1
lengths
m
m
mm
mm
mm
D+D
7
9
1700
2400
810
E+D
9
9
1700
2700
810
F+E
12
12
2000
2700
936
G+F
15.5
16
2400
2700
1117
H2
mm
63
84
107
140
H3
mm
790
790
940
1103
TA
576
106
H gear + P6 motor
High
Low
8
1.3
8
1.3
8
1.3
-
Auxiliary hoist ND 04 cover plate
dimensions
L8
L16
L8*
561
42
541
H4
mm
88
88
118
156
M3
mm
784
784
934
1134
J gear
High
Low
6.3
T9 motor
T9 motor
TA motor
J gear + P7 motor
High
Low
10
1.7
10
1.7
10
1.7
-
L16*
62
M4
mm
558
558
708
821
Weight
Min R
kg
2100
2150
2300
2600
Weight
Max R
kg
2550
2600
2650
2750
L2
514
L15
22
L28
104
L3
600
L17
532
L29
1013
Trolley dimensions
C1
1062
L4
3
L18
713
L30
201
C2
564
L5
123
L19
391
L31
216
D1 (∅
∅)
200
L6
541
L20
926
L32
256
D2 (∅
∅)
230
L7
2272
L21
604
L33
213
HTH
696
L9
612
L22
478
L34
192
WB
1800
L10
97
L23
562
L35
600
WW
min
55
L11
88
L24
218
L36
149
WW
max
100
L12
25
L25
213
L37
548
L13
643
L26
522
L1
514
L14
55
L27
480
D004579_A
063872
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: Standard rail gauges: 1700, 2000, 2400 and 2700.
Note: H- and M- dimensions with min R.
* Please, disregard the dimensions L8* and L16*.
English
30/12/2011
93 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NE 06 + ND 04
Note.1: travelling machinery inside when R=>2400.
English
30/12/2011
94 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
44 TWO HOIST TROLLEY NF 24 + NC 04
Main hoist NF 24 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
4
0.6
25000
3m/M6
P6/T6 motor
32000
2m/M5
P6/T6 motor
40000
1Am/M4
P6/T6 motor
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
Main hoist NF 24 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
T6
536
65
Auxiliary hoist NC 04 hoisting speed (m/min)
Load
Class
E gear + P3 motor
kg
Fem/ISO
High
Low
4000
3m/M6
4
0.7
5000
2m/M5
4
0.7
6300
1Am/M4
4
0.7
Auxiliary hoist NC 04 motor dimensions
Motor
P3
P4
M1 (mm)
449
542
Weight ( kg)
35
53
G gear
High
Low
6.3
1
P7/T7 motor
P7/T7 motor
T8 motor
T7
536
71
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
T8
536
81
F gear + P3 motor
High
Low
5
0.8
5
0.8
-
J gear
High
Low
10
T9 motor
T9 motor
-
T9
536
92
H gear + P4 motor
High
Low
8
1.3
8
1.3
-
Auxiliary hoist NC 04 cover plate dimensions
L8
L15
L8*
L15*
494
164
478
148
Hoist dimensions (main hoist NF 24 + auxiliary hoist NC 04)
HOL1
HOL2
Drum
NF 24
NC 04
Min R
Max R
H1
lengths
m
m
mm
mm
mm
G+D
10
12
2000
2400
787
H+E
13.5
15
2000
2700
937
H2
mm
99
129
M3
mm
489
364
M4
mm
772
772
Weight
Min R
kg
2800
2900
Weight
Max R
kg
2950
3250
Trolley dimensions
C1
1440
L1
595
L14
84
L27
1013
C2
430
L2
595
L16
455
L28
342
D1(∅
∅)
250
L3
600
L17
695
L29
256
D2(∅
∅)
280
L4
82
L18
459
L30
221
WB
2000
L5
135
L19
950
L31
255
HTH
846
L6
492
L20
714
L32
98
WW
min
55
L7
2528
L21
478
L33
600
WW
max
100
L9
693
L22
1022
L34
121
L10
20
L23
218
L35
546
L11
150
L24
255
L12
18
L25
437
L13
720
L26
487
D004571_A
063877
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: H and M dimensions with min R.
Note: Standard rail gauges: 2000, 2400 and 2700.
* Please, disregard the dimensions L8* and L15*.
English
30/12/2011
95 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NF 24 + NC 04
Note.1: Travelling machinery inside when R=>2400.
English
30/12/2011
96 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
45 TWO HOIST TROLLEY NF 24 + ND 02
Main hoist NF 24 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
4
0.6
25000
3m/M6
P6/T6 motor
32000
2m/M5
P6/T6 motor
40000
1Am/M4
P6/T6 motor
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
Main hoist NF 24 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
T6
536
65
Auxiliary hoist ND 02 hoisting speed (m/min)
Load
Class
E gear + P5/T5 motor
kg
Fem/ISO
High
Low
4000
3m/M6
8
1.3
5000
2m/M5
8
1.3
6300
1Am/M4
8
1.3
Auxiliary hoist ND 02 motor dimensions
Motor
P5
P6
M1 (mm)
567
567
Weight ( kg)
58
85
G gear
High
Low
6.3
1
P7/T7 motor
P7/T7 motor
T8 motor
T7
536
71
T8
536
81
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
-
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
J gear
High
Low
10
T9 motor
T9 motor
-
T9
536
92
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
-
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
-
Auxiliary hoist ND 02 cover plate dimensions
L7
L14
L7*
L14*
512.5
82.5
492.5
62.5
P7
607
105
Hoist dimensions (main hoist NF 24 + auxiliary hoist ND 02)
HOL1
HOL2
Drum
NF 24
ND 02
Min R
Max R
H1
lengths
m
m
mm
mm
mm
J+D
18.5
18
2400
2700
1058
H2
mm
176
M3
mm
389
Weight
Min R
kg
3300
M4
mm
908
Weight
Max R
kg
3600
Trolley dimensions
C1
1440
L1
135
L15
455
L27
1013
C2
625.7
L2
600
L16
695
L28
355
D1(∅
∅)
250
L3
82
L17
441
L29
256
D2(∅
∅)
280
L4
595
L18
950
L30
216
WB
2000
L5
492
L19
696
L31
111
HTH
864
L6
2528
L20
478
L32
600
WW
min
55
L8
693
L21
1622
L33
255
WW
max
100
L9
20
L22
218
L34
149
L10
150
L23
255
L35
548
L11
18
L24
437
L12
720
L25
126
L13
84
L26
487
D004572_A
063878
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: H and M dimensions with min R.
Note: Standard rail gauges: 2400 and 2700.
* Please, disregard the dimensions L7* and L14*.
English
30/12/2011
97 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NF 24 + ND 02
English
30/12/2011
98 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
46 TWO HOIST TROLLEY NF 24 + ND 04
Main hoist NF 24 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
4
0.6
25000
3m/M6
P6/T6 motor
32000
2m/M5
P6/T6 motor
40000
1Am/M4
P6/T6 motor
Main hoist NF 24 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
T6
536
65
T7
536
71
Auxiliary hoist ND 04 hoisting speed (m/min)
Load
Class
E gear + P5/T5 motor
kg
Fem/ISO
High
Low
6300
3m/M6
4
0.7
8000
3m/M6
4
0.7
10000
2m/M5
4
0.7
12500
1Am/M4
4
0.7
Auxiliary hoist ND 04 motor dimensions
Motor
P5
P6
P7
M1 (mm)
567
567
607
58
85
105
Weight (
kg)
T5
487
45
G gear
High
Low
6.3
1
P7/T7 motor
P7/T7 motor
T8 motor
T8
536
81
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
-
T6
567
65
T7
607
71
Hoist dimensions (main hoist NF 24 + auxiliary hoist ND 04)
HOL1
HOL2
Drum
NF 24
ND 04
Min R
Max R
lengths
m
m
mm
mm
G+E
10
12
2000
2400
H+F
13.5
16
2000
2700
J+G
18.5
20
2400
2700
H1
mm
940
903
1103
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
J gear
High
Low
10
T9 motor
T9 motor
-
T9
536
92
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
-
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
-
Auxiliary hoist ND 04 cover plate dimensions
L8
L15
L8*
L15*
512.5
82.5
492.5
62.5
H2
mm
118
156
204
M3
mm
489
364
389
M4
mm
708
708
908
Weight
Min R
kg
3050
3150
3500
Weight
Max R
kg
3250
3550
3700
L12
18
L25
437
L13
720
L26
126
Trolley dimensions
C1
1440
L1
595
L14
84
L27
487
C2
564
L2
595
L16
455
L28
1013
D1 (∅
∅)
250
L3
600
L17
695
L29
355
D2 (∅
∅)
280
L4
82
L18
472
L30
256
WB
2000
L5
135
L19
950
L31
216
HTH
833
L6
492
L20
727
L32
255
WW
min
55
L7
2528
L21
478
L33
111
WW
max
100
L9
693
L22
1022
L34
600
L10
20
L23
218
L35
149
L11
150
L24
255
L36
668
D004570_A
063876
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: H and M dimensions with min R.
Note: Standard rail gauges: 2000, 2400 and 2700.
* Please, disregard the dimensions L8* and L15*.
English
30/12/2011
99 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NF 24 + ND 04
English
30/12/2011
100 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
47 TWO HOIST TROLLEY NF 24 + NE 04
Main hoist NF 24 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
4
0.6
25000
3m/M6
P6/T6 motor
32000
2m/M5
P6/T6 motor
40000
1Am/M4
P6/T6 motor
Main hoist NF 24 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
T6
536
65
T7
536
71
T8
536
81
Auxiliary hoist NE 04 hoisting speed (m/min)
E gear
F gear
Load
Class
High
Low
High
Low
kg
Fem/ISO
4
0.7
5
0.8
12500
3m/M6
P6/T6 motor
P6/T6 motor
16000
2m/M5
P6/T6 motor
P6/T6 motor
20000
1Am/M4
P6/T6 motor
P7/T7 motor
Auxiliary hoist NE 04 motor dimensions
Motor
P6
P7
M1 (mm)
536
576
Weight ( kg)
85
105
P8
711
106
G gear
High
Low
6.3
1
P7/T7 motor
P7/T7 motor
T8 motor
T7
536
71
J gear
High
Low
10
T9 motor
T9 motor
-
T9
536
92
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
T6
536
65
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
T8
536
81
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
T9
536
92
J gear
High
Low
10
T9 motor
T9 motor
TA motor
TA
576
106
Hoist dimensions (main hoist NF 24 + auxiliary hoist NE 04)
Drum
lengths
G+D
H+E
J+F
HOL1
NF 24
m
10
13.5
18.5
HOL2
NE 04
m
10.5
14
18
Min R
mm
2000
2400
2400
Max R
mm
2400
2700
2700
D1 (∅
∅)
250
L3
600
L15
246
L27
1013
D2 (∅
∅)
280
L4
82
L16
455
L28
546
HTH
876
L5
135
L17
695
L29
378
H1
mm
938
938
114
1
H2
mm
94
125
161
M3
mm
489
564
389
M4
mm
934
1134
1134
Weight
Min R
kg
3700
3950
4100
Weight
Max R
kg
3850
4200
4350
Trolley dimensions
C1
1440
L1
595
L13
720
L25
437
C2
922
L2
595
L14
20
L26
126
WB
2000
L6
492
L18
429
L30
256
WW
min
55
L7
2774
L19
950
L31
255
WW
max
100
L8
484
L20
684
L32
134
L9
693
L21
478
L33
218
L10
20
L22
1022
L34
562
L11
150
L23
218
L35
900
L12
18
L24
255
D004556_A
063874
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: H and M dimensions with min R.
Note: Standard rail gauges: 2000, 2400 and 2700.
English
30/12/2011
101 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NF 24 + NE 04
English
30/12/2011
102 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
48 TWO HOIST TROLLEY NF 26 + NC 04
Main hoist NF 26 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
2.5
0.4
40000
3m/M6
P6/T6 motor
50000
2m/M5
P6/T6 motor
60000
1Am/M4
P6/T6 motor
Main hoist NF 26 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
T6
536
65
T7
536
71
Auxiliary hoist NC 04 hoisting speed (m/min)
Load
Class
E gear + P3/T3 motor
kg
Fem/ISO
High
Low
4000
3m/M6
4
0.7
5000
2m/M5
4
0.7
6300
1Am/M4
4
0.7
Auxiliary hoist NC 04 motor dimensions
Motor
P3
P4
M3 (mm)
597
690
Weight ( kg)
35
53
T3
507
22
G gear
High
Low
4
0.6
P7/T7 motor
P7/T7 motor
T8 motor
T8
536
81
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
J gear
High
Low
6.3
T9 motor
T9 motor
-
T9
536
92
F gear + P3/T3 motor
High
Low
5
0.8
5
0.8
-
H gear + P4/T4 motor
High
Low
8
1.3
8
1.3
-
Auxiliary hoist NC 04 cover plate dimensions
L7
L14
L7*
L14*
500
210
484
194
T4
610
45
Hoist dimensions (main hoist NF 26 + auxiliary hoist NC 04)
HOL1
HOL2
Drum
NF 26
NC 04
Min R
Max R
H1
lengths
m
m
mm
mm
mm
H+C
9
9
2400
2700
1137
J+D
12
12
2400
2700
1137
K+E
15
15
2700
1287
H2
mm
74
99
129
M3
mm
564
739
739
M4
mm
972
972
1122
Weight
Min R
kg
3500
3650
3950
Weight
Max R
kg
3750
3850
3950
Trolley dimensions
C1
1516
L1
173
L15
455
L27
1013
C2
430
L2
600
L16
656
L28
342
D1 (∅
∅)
250
L3
81.9
L17
504
L29
256
D2 (∅
∅)
280
L4
595
L18
911
L30
221
HTH
840
L5
512
L19
759
L31
53
WB
2000
L6
2573
L20
477
L32
600
WW
min
55
L8
689
L21
1272
L33
255
WW
max
100
L9
20
L22
218
L34
121
L10
150
L23
255
L35
446
L11
63
L24
392
L12
740
L25
176
L13
84
L26
442
D004574_A
063879
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: H and M dimensions with min R.
Note: Standard rail gauges: 2400 and 2700.
* Please, disregard the dimensions L7* and L14*.
English
30/12/2011
103 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NF 26 + NC 04
English
30/12/2011
104 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
49 TWO HOIST TROLLEY NF 26 + ND 04
Main hoist NF 26 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
2.5
0.4
40000
3m/M6
P6/T6 motor
50000
2m/M5
P6/T6 motor
60000
1Am/M4
P6/T6 motor
Main hoist NF 26 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
T6
536
65
Auxiliary hoist ND 04 hoisting speed (m/min)
Load
Class
E gear + P5 motor
kg
Fem/ISO
High
Low
6300
3m/M6
4
0.7
8000
3m/M6
4
0.7
10000
2m/M5
4
0.7
12500
1Am/M4
4
0.7
Auxiliary hoist ND 04 motor dimensions
Motor
P5
P6
M1 (mm)
567
567
Weight ( kg)
58
85
G gear
High
Low
4
0.6
P7/T7 motor
P7/T7 motor
T8 motor
T7
536
71
T8
536
81
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
J gear
High
Low
6.3
T9 motor
T9 motor
-
T9
536
92
F gear + P5 motor
High
Low
5
0.8
5
0.8
5
0.8
-
H gear + P6 motor
High
Low
8
1.3
8
1.3
8
1.3
-
J gear + P7 motor
High
Low
10
1.7
10
1.7
10
1.7
-
Auxiliary hoist ND 04 cover plate dimensions
L7
L13
L7*
L13*
517.5
127.5
497.5
107.5
P7
607
105
Hoist dimensions (main hoist NF 26 + auxiliary hoist ND 04)
HOL1
HOL2
Drum
NF 26
ND 04
Min R
Max R
lengths
m
m
mm
mm
H+D
9
9
2400
2700
J+E
12
12
2400
2700
K+F
15
16
2700
2700
H1
mm
1140
1140
1253
H2
mm
88
118
156
M3
mm
564
739
739
M4
mm
908
908
1058
Weight
Min R
kg
3850
3950
4250
Weight
Max R
kg
4050
4150
4250
Trolley dimensions
C1
1516
L1
173
L15
455
L27
1013
C2
564
L2
600
L16
656
L28
355
D1 (∅
∅)
250
L3
82
L17
517
L29
256
D2 (∅
∅)
280
L4
595
L18
911
L30
216
HTH
827
L5
512
L19
772
L31
66
WB
2000
L6
2573
L20
477
L32
600
WW
min
55
L8
689
L21
1272
L33
548
WW
max
100
L9
20
L22
218
L34
149
L10
150
L23
255
L35
255
L11
63
L24
392
L12
740
L25
126
L14
84
L26
442
D004573_A
064086
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: H and M dimensions with min R.
Note: Standard rail gauges: 2400 and 2700.
* Please, disregard the dimensions L7* and L13*.
English
30/12/2011
105 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NF 26 + ND 04
English
30/12/2011
106 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
50 TWO HOIST TROLLEY NF 26 + NE 04
Main hoist NF 26 hoisting speed (m/min)
E gear
Load
Class
High
Low
kg
Fem/ISO
2.5
0.4
40000
3m/M6
P6/T6 motor
50000
2m/M5
P6/T6 motor
60000
1Am/M4
P6/T6 motor
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
Main hoist NF 26 motor dimensions
Motor
P6
P7
M2 (mm)
536
576
Weight ( kg)
85
105
T6
536
65
T7
536
71
T8
536
81
Auxiliary hoist NE 04 hoisting speed (m/min)
E gear
F gear
Load
Class
High
Low
High
Low
kg
Fem/ISO
4
0.7
5
0.8
12500
3m/M6
P6/T6 motor
P6/T6 motor
16000
2m/M5
P6/T6 motor
P6/T6 motor
20000
1Am/M4
P6/T6 motor
P7/T7 motor
Auxiliary hoist NE 04 motor dimensions
Motor
P6
P7
M1 (mm)
536
576
Weight ( kg)
85
105
P8
711
106
G gear
High
Low
4
0.6
P7/T7 motor
P7/T7 motor
T8 motor
T6
536
65
J gear
High
Low
6.3
T9 motor
T9 motor
-
T9
536
92
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
T7
536
71
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
T8
536
81
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
T9
536
92
J gear
High
Low
10
T9 motor
T9 motor
TA motor
TA
576
106
Hoist dimensions (main hoist NF 26 + auxiliary hoist NE 04)
Drum
lengths
H+D
J+E
K+F
HOL1
NF 26
m
9
12
15
HOL2
NE 04
m
10.5
14
18
Min R
mm
2400
2400
2700
Max R
mm
2400
2700
2700
H1
mm
1138
1138
1291
H2
mm
94
125
161
M3
mm
564
389
389
M4
mm
1144
1144
1344
Weight
Min R
kg
4450
4550
4950
Weight
Max R
kg
4450
4800
4950
Trolley dimensions
C1
1516
L1
173
L13
20
L25
126
C2
922
L2
595
L14
201
L26
442
D1 (∅
∅)
250
L3
600
L15
455
L27
1013
D2 (∅
∅)
280
L4
82
L16
656
L28
378
HTH
870
L5
512
L17
474
L29
256
WB
2000
L6
2774
L18
911
L30
501
WW
min
55
L7
489
L19
729
L31
255
WW
max
100
L8
689
L20
477
L32
900
L9
20
L21
1272
L33
89
L10
150
L22
218
L34
218
L11
63
L23
255
L35
562
L12
720
L24
392
D004564_A
063875
Note: Weight calculated with smallest P motors.
Note: All dimensions in mm.
Note: H and M dimensions with min R.
Note: Standard rail gauges: 2400 and 2700.
English
30/12/2011
107 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Two Hoist Trolley NF 26 + NE 04
English
30/12/2011
108 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
DOUBLE GIRDER TROLLEY, HIGH
English
30/12/2011
109 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
English
30/12/2011
110 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
51 HIGH DOUBLE GIRDER HOIST NB, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
800
3m/M6
1000
2m/M5
1250
3m/M6
1600
2m/M5
F gear + P1/T1 motor
High
Low
10
1.7
10
1.7
-
Hoist dimensions
HOL
Length
m
code
12
19
A
C
Motor dimensions
Motor
P1
M2 (mm)
498
Weight (kg)
21
Trolley dimensions
C
D1(∅
∅)
185
L1
83
L14
138
90
L2
324
L15
104
G gear + P2/T2 motor
High
Low
12.5
2.1
12.5
2.1
12.5
2.1
12.5
2.1
H gear + P3/T3 motor
High
Low
16
2.7
16
2.7
16
2.7
16
2.7
M1
mm
H2
mm
Min R
mm
L6
mm
L6*
mm
Weight
kg
431
561
90
144
900
900
87
87
72
72
210
220
P2
558
31
D2(∅
∅)
120
L3
250
L16
600
F gear + P2/T2 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
P3
588
35
D3(∅
∅)
63
L4
15
L17
212
T1
498
22
T2
498
22
T3
498
22
H1
WB
W min
W max
369
L5
1096
L18
138
820
L7
400
50
L8
90
70
L9
397
L10
423
L11
536
L12
561
L13
169
D002074_A
062128
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
Note: Min R with second brake.
Note: Standard rail gauges: 900, 1200, 1400, 1700 and 2000.
* Please, disregard the dimension L6*.
English
30/12/2011
111 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist NB, REEVING: 02
English
30/12/2011
112 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
52 HIGH DOUBLE GIRDER HOIST NB, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
1600
3m/M6
2000
2m/M5
2500
3m/M6
3200
2m/M5
F gear + P1/T1 motor
High
Low
5
0.8
5
0.8
-
Hoist dimensions
HOL
Length
m
code
6
A
9.5
C
Motor dimensions
Motor
P1
M2 (mm)
498
Weight (kg)
21
Trolley dimensions
C
D1(∅
∅)
135
L1
83
L14
138
90
L2
324
L15
104
M1
mm
431
561
P2
558
31
D2(∅
∅)
120
L3
250
L16
600
H2
mm
45
72
P3
588
35
D3(∅
∅)
63
L4
15
L17
212
F gear + P2/T2 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
Min R
mm
900
900
T1
498
22
G gear + P2/T2 motor
High
Low
6.3
1.1
6.3
1.1
6.3
1.1
6.3
1.1
L6
mm
87
87
T2
498
22
L6*
mm
72
72
H gear + P3/T3 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
Weight
kg
210
220
T3
498
22
H1
WB
W min
W max
424
L5
1096
L18
138
820
L7
90
50
L8
400
70
L9
411
L10
410
L11
549
L12
548
L13
169
D002079_A
028596
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
Note: Min R with second brake.
Note: Standard rail gauges: 900, 1200, 1400, 1700 and 2000.
* Please, disregard the dimension L6*.
English
30/12/2011
113 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist NB, REEVING: 04
English
30/12/2011
114 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
53 HIGH DOUBLE GIRDER HOIST NC, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
2000
3m/M6
2500
2m/M5
3200
1Am/M4
E gear + P3/T3 motor
High
Low
8
1.3
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
12
B
18
C
24
D
30
E
M1
mm
467
567
667
787
M2
mm
130
130
102
252
Motor dimensions
Motor
P3
M3 (mm)
597
Weight (kg)
35
P4
690
53
T3
507
22
Trolley dimensions
C
D1 (∅
∅)
90
L1
83
L13
138
90
L2
324
L14
158
D2 (∅
∅)
120
L3
250
L15
600
D3 (∅
∅)
63
L4
12
L16
212
F gear + P3/T3 motor
High
Low
10
1.7
10
1.7
-
H1
mm
337
337
309
459
H2
mm
95
144
193
252
Min R
mm
900
900
900
1200
H gear + P4/T4 motor
High
Low
16
2.7
16
2.7
-
L18
mm
95
95
95
95
L18*
mm
79
79
79
79
Weight
kg
321
331
346
367
T4
610
45
WB
W min
W max
1010
L5
1286
L17
138
50
L6
427
70
L7
571
L8
90
L9
483
L10
527
L11
621
L12
665
D002229_A
062229
Note: Weight calculated with P3 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 900, 1200, 1400, 1700 and 2000.
* Please, disregard the dimension L18*.
English
30/12/2011
115 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist NC, REEVING: 02
English
30/12/2011
116 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
54 HIGH DOUBLE GIRDER HOIST NC, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/m6
5000
2m/M4
6300
1Am/M4
E gear + P3/T3 motor
High
Low
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
6
B
9
C
12
D
15
E
M1
mm
467
567
667
787
M2
mm
130
130
102
252
Motor dimensions
Motor
P3
M3 (mm)
597
Weight (kg)
35
P4
690
53
T3
507
22
Trolley dimensions
C1
C2
80
L1
83
L13
138
97
L2
324
L14
158
D1 (∅
∅)
90
L3
250
L15
600
D2 (∅
∅)
120
L4
12
L16
212
D3 (∅
∅)
63
L5
1286
L17
138
F gear + P3/T3 motor
High
Low
5
0.8
5
0.8
-
H1
mm
415
415
387
537
H2
mm
49
74
99
129
Min R
mm
900
900
900
1200
H gear + P4/T4 motor
High
Low
8
1.3
8
1.3
-
L18
mm
95
95
95
95
L18*
mm
79
79
79
79
Weight
kg
325
335
355
375
T4
610
45
WB
W min
W max
1010
L6
427
50
L7
571
70
L8
90
L9
505
L10
505
L11
643
L12
643
D002230_A
062231
Note: Weight calculated with P3 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 900, 1200, 1400, 1700 and 2000.
* Please, disregard the dimension L18*.
English
30/12/2011
117 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist NC, REEVING: 04
English
30/12/2011
118 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
55 HIGH DOUBLE GIRDER HOIST ND, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
6300
1Am/M4
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
18
D
24
E
32
F
40
G
M1
mm
697
817
967
1157
Motor dimensions
Motor
P5
M3 (mm)
722
Weight (kg)
58
P6
722
85
M2
mm
159
159
122
372
P7
762
105
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
-
H1
mm
458
458
421
671
T5
642
45
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
-
H2
mm
176
235
309
403
L18
mm
40
40
40
40
T6
722
65
T7
722
71
W max
87
L7
685
L8
100
L18*
mm
20
20
20
20
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
-
Min R
mm
1200
1200
1200
1700
Weight
kg
665
690
715
795
Trolley dimensions
C
211
L1
430
L13
148
D1 (∅
∅)
110
L2
382
L14
128
D2 (∅
∅)
140
L3
400
L15
900
D3 (∅
∅)
63
L4
15
L16
255
WB
1080
L5
98
L17
148
W min
52
L6
1376
L9
507
L10
573
L11
655
L12
721
D002238_A
062235
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700 and 2000.
* Please, disregard the dimension L18*.
English
30/12/2011
119 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 02
English
30/12/2011
120 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
56 HIGH DOUBLE GIRDER HOIST ND, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
5000
3m/M6
6300
3m/M6
8000
3m/M6
10000
2m/M5
12500
1Am/M4
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
9
D
12
E
16
F
20
G
M1
mm
697
817
967
1157
Motor dimensions
Motor
P5
M3 (mm)
722
Weight (kg)
58
P6
722
85
M2
mm
159
159
122
372
P7
762
105
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
-
H1
mm
540
540
503
753
T5
642
45
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
-
H2
mm
88
118
156
204
T6
722
65
L18
mm
40
40
40
40
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
-
L18*
mm
20
20
20
20
Min R
mm
1200
1200
1200
1700
Weight
kg
685
710
735
815
T7
722
71
Trolley dimensions
C1
155
L1
470
L13
148
C2
210
L2
382
L14
128
D1 (∅
∅)
110
L3
400
L15
900
D2 (∅
∅)
140
L4
15
L16
255
D3 (∅
∅)
63
L5
98
L17
148
WB
1080
L6
1376
W min
52
L7
685
W max
87
L8
100
L9
540
L10
540
L11
688
L12
688
D002240_A
062246
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700 and 2000.
* Please, disregard the dimension L18*.
English
30/12/2011
121 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 04
English
30/12/2011
122 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
57 HIGH DOUBLE GIRDER HOIST ND, REEVING: 06
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
6
D
8
E
10
F
13
G
M1
mm
558
678
828
1018
Motor dimensions
Motor
P5
MOT (mm)
722
Weight ( kg)
58
P6
722
85
M2
mm
548
648
803
933
P7
762
105
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
H1
mm
515
615
770
900
T5
642
45
H2
mm
53
78
98
132
T6
722
65
Min R
mm
1200
1400
1700
2000
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
Weight
kg
765
800
850
905
T7
722
71
Trolley dimensions
C
525
RO
98
∅ BU
63
TD
20
BU
163
TH
695
BUH
100
E1
382
E2
1343
E3
18
GEA
143
WB
1080
∅ WD
140
W min
54
W max
84
D007196_A
124517
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
Note: M2 and weight calculated with Min R.
English
30/12/2011
123 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 06
English
30/12/2011
124 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
58 HIGH DOUBLE GIRDER HOIST ND, REEVING: 08
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
D
6
E
8
F
10
G
M1
mm
558
678
828
1018
Motor dimensions
Motor
P5
MOT (mm)
722
Weight ( kg)
58
P6
722
85
M2
mm
548
648
803
933
P7
762
105
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
H1
mm
515
615
770
900
T5
642
45
H2
mm
44
53
76
98
T6
722
65
Min R
mm
1200
1400
1700
2000
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
Weight
kg
780
815
865
915
T7
722
71
Trolley dimensions
C
525
RO
98
∅ BU
63
TD
20
BU
163
TH
695
BUH
100
E1
382
E2
1343
E3
18
GEA
143
WB
1080
∅ WD
140
W min
54
W max
84
D007197_A
124518
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
Note: M2 and weight calculated with Min R.
English
30/12/2011
125 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 08
English
30/12/2011
126 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
59 HIGH DOUBLE GIRDER HOIST ND, REEVING: 22
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
Hoist dimensions
HOL
Length
m
code
8.5
D
13
E
18
F
25
G
33.5
H
46
J
Motor dimensions
Motor
MOT (mm)
Weight ( kg)
P5
578
58
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
M1
mm
558
678
828
1018
1268
1618
P6
578
85
M2
mm
321
261
286
341
216
424
P7
618
105
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
BRA
mm
128
128
T5
498
45
Min R
mm
1200
1200
1400
1700
1700
2400
T6
578
65
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
Weight
kg
675
695
735
785
840
950
T7
578
71
Trolley dimensions
C
355
RO
98
∅ BU
63
TD
20
BU
148
TH
692
BUH
100
E1
382
E2
1328
E3
15
GEA
143
WB
1080
∅ WD
110
W min
52
W max
87
D007182_A
124426
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
Note: M2 and weight calculated with Min R.
English
30/12/2011
127 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 22
English
30/12/2011
128 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
60 HIGH DOUBLE GIRDER HOIST ND, REEVING: 24
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
8000
3m/M6
10000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
D
6.5
E
9
F
12.5
G
16.5
H
23
J
Motor dimensions
Motor
MOT (mm)
Weight (kg)
P5
578
58
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
M1
mm
558
678
828
1018
1268
1618
P6
578
85
M2
mm
321
261
286
341
216
424
P7
618
105
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
BRA
mm
128
128
T5
498
45
Min R
mm
1200
1200
1400
1700
1700
2400
T6
578
65
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
Weight
kg
740
760
800
850
905
1015
T7
578
71
Trolley dimensions
C
520
RO
98
∅ BU
63
TD
20
BU
148
TH
692
BUH
100
E1
382
E2
1328
E3
15
GEA
143
WB
1080
∅ WD
110
W min
52
W max
87
D007183_A
124427
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
Note: M2 and weight calculated with Min R.
English
30/12/2011
129 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 24
English
30/12/2011
130 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
61 HIGH DOUBLE GIRDER HOIST ND, REEVING: 26
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
E
6
F
8
G
11
H
15
J
Motor dimensions
Motor
MOT (mm)
Weight (kg)
P5
578
58
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
M1
mm
678
828
1018
1268
1618
P6
578
85
M2
mm
261
286
341
216
424
P7
618
105
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
BRA
mm
128
128
T5
498
45
Min R
mm
1200
1400
1700
1700
2400
T6
578
65
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
Weight
kg
790
830
885
935
1050
T7
578
71
Trolley dimensions
C
520
RO
98
∅ BU
63
TD
20
BU
163
TH
695
BUH
100
E1
382
E2
1343
E3
18
GEA
143
WB
1080
∅ WD
140
W min
54
W max
84
D007184_A
124428
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
Note: M2 and weight calculated with Min R.
English
30/12/2011
131 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 26
English
30/12/2011
132 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
62 HIGH DOUBLE GIRDER HOIST ND, REEVING: 28
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
Hoist dimensions
HOL
Length
m
code
4.5
F
6
G
8
H
11.5
J
Motor dimensions
Motor
MOT (mm)
Weight (kg)
P5
578
58
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
M1
mm
828
1018
1268
1618
P6
578
85
M2
mm
286
341
216
424
P7
618
105
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
BRA
mm
128
128
T5
498
45
Min R
mm
1400
1700
1700
2400
T6
578
65
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
Weight
kg
840
895
945
1060
T7
578
71
Trolley dimensions
C
520
RO
98
∅ BU
63
TD
20
BU
163
TH
695
BUH
100
E1
382
E2
1343
E3
18
GEA
143
WB
1080
∅ WD
140
W min
54
W max
84
D007185_A
124429
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
Note: M2 and weight calculated with Min R.
English
30/12/2011
133 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 28
English
30/12/2011
134 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
DOUBLE GIRDER TROLLEY, LOW
English
30/12/2011
135 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
English
30/12/2011
136 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
63 LOW DOUBLE GIRDER HOIST ND, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
6300
1Am/M4
Hoist dimensions
HOL
Length
m
code
18
D
24
E
32
F
40
G
Motor dimensions
Motor
M3 (mm)
Weight (kg)
Trolley dimensions
C
D1
615
110
L1
L2
430
342
L13
L14
721
148
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
8
1.3
M1
mm
697
817
967
1157
P5
722
58
D2
140
L3
250
L15
128
M2
mm
259
259
372
522
P6
722
85
D3
63
L4
5
L16
900
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
-
H1
mm
558
558
671
821
P7
762
105
WB
1080
L5
98
L17
148
H2
mm
176
235
309
403
T5
642
45
W min
52
L6
320
L18
212
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
-
L19
mm
30
30
30
30
T6
722
65
W max
87
L7
1376
L8
245
L19*
mm
10
10
10
10
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
-
Min R
mm
1400
1400
1700
2000
Weight
kg
650
675
720
760
T7
722
71
L9
100
L10
507
L11
573
L12
655
D002115_A
005058
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700 and 2000.
* Please, disregard the dimension L19*.
English
30/12/2011
137 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Double Girder Hoist ND, REEVING: 02
English
30/12/2011
138 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
64 LOW DOUBLE GIRDER HOIST ND, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
5000
3m/M6
6300
3m/M6
8000
3m/M6
10000
2m/M5
12500
1Am/M4
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
9
D
12
E
16
F
20
G
M1
mm
697
817
967
1157
Motor dimensions
Motor
P5
M3 (mm)
722
Weight (kg)
58
P6
722
85
M2
mm
259
259
372
522
P7
762
105
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
-
H1
mm
640
640
753
903
T5
642
45
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
-
H2
mm
88
118
156
204
T6
722
65
L19
mm
30
30
30
30
L19*
mm
10
10
10
10
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
-
Min R
mm
1400
1400
1700
2000
Weight
kg
670
700
745
785
T7
722
71
Trolley dimensions
C1
595
L1
470
L13
688
C2
651
L2
342
L14
148
D1 (∅
∅)
110
L3
250
L15
128
D2 (∅
∅)
140
L4
5
L16
900
D3 (∅
∅)
63
L5
98
L17
148
WB
1080
L6
320
L18
212
W min
52
L7
1376
W max
87
L8
245
L9
100
L10
540
L11
540
L12
688
D002122_A
005060
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700 and 2000.
* Please, disregard the dimension L19*.
English
30/12/2011
139 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Low Double Girder Hoist ND, REEVING: 04
English
30/12/2011
140 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
NORMAL HEADROOM TROLLEY
English
30/12/2011
141 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
English
30/12/2011
142 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
65 NORMAL HEADROOM HOIST NB, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
800
3m/M6
1000
2m/M5
1250
3m/M6
1600
2m/M5
F gear + P1/T1 motor
High
Low
10
1.7
10
1.7
-
Hoist dimensions
HOL
Length
m
code
12
A
19
C
M1
mm
431
561
Motor dimensions
Motor
P1
M2 (mm)
498
Weight ( kg)
21
Trolley dimensions
B min.
B max.
100
E1
311
L5
150
450
E2
305
L6
2
P2
558
31
C
740
E3
531
L7
253
D1(∅
∅)
100
E4
380
L8
531
F gear + P2/T2 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
H2
mm
90
144
P3
588
35
D3(∅
∅)
63
E5
236
L9
45
H5
mm
447
447
T1
498
22
T2
498
22
E6
179
L10
40
E7
116
L11
179
G gear + P2/T2 motor
High
Low
12.5
2.1
12.5
2.1
12.5
2.1
12.5
2.1
H5*
mm
462
462
H gear + P3/T3 motor
High
Low
16
2.7
16
2.7
16
2.7
16
2.7
Weight
kg
250
270
T3
498
22
E11
277
L12
26
H1
70
M3
155
H6
633
M4
400
L2
33
M6
115
L4
377
Trolley dimensions
Length
L15
code
A
185
C
315
D002077_A
062129
Minimum track radius
B
Min R
100 - 109
2500
110 - 119
2000
120 - 450
1500
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
Note: Additional travelling machinery for curved track (option) indicated with an ‘X’ in the drawing.
* Please, disregard the dimension H5*.
English
30/12/2011
143 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NB, REEVING: 02
English
30/12/2011
144 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
66 NORMAL HEADROOM HOIST NB, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
1600
3m/M6
2000
2m/M5
2500
3m/M6
3200
2m/M5
F gear + P1/T1 motor
High
Low
5
0.8
5
0.8
-
Hoist dimensions
HOL
Length
m
code
6
A
9.5
C
M1
mm
431
561
Motor dimensions
Motor
P1
M2 (mm)
498
Weight ( kg)
21
Trolley dimensions
B min.
B max.
80
E1
311
L5
150
450
E2
305
L6
2
P2
558
31
C
690
E3
531
L7
253
D1(∅
∅)
63
E4
380
L8
531
F gear + P2/T2 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
H2
mm
45
72
P3
588
35
D2(∅
∅)
100
E5
236
L9
45
H5
mm
465
465
T1
498
22
H5*
mm
480
480
T2
498
22
E6
179
L10
40
G gear + P2/T2 motor
High
Low
6.3
1.1
6.3
1.1
6.3
1.1
6.3
1.1
E7
116
L11
179
H gear + P3/T3 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
Weight
kg
260
300
T3
498
22
E11
277
L12
26
H1
15
M3
155
H6
616
M4
400
L2
33
M6
115
L4
377
Trolley dimensions
Length
L15
code
A
185
C
315
D002082_A
062130
Minimum track radius
B
100 - 109
110 - 119
120 - 450
Min R
2500
2000
1500
Note: All dimensions in mm.
Note: Weight calculated with P1, When B=300 mm.
Note: Additional travelling machinery for curved track (option) indicated with an ‘X’ in the drawing.
* Please, disregard the dimension H5*.
English
30/12/2011
145 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NB, REEVING: 04
English
30/12/2011
146 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
67 NORMAL HEADROOM HOIST NC, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
2000
3m/M6
2500
2m/M5
3200
1Am/M4
Hoist dimensions
HOL
Length
m
code
12
B
18
C
24
D
30
E
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
120
E2
305
L5
150
450
E3
527
L6
2
Trolley dimensions
Length
E1
code
B/C
362
D
362
E
184
E gear + P3/T3 motor
High
Low
8
1.3
8
1.3
8
1.3
M1
mm
467
567
667
787
P3
597
35
M3
mm
211
211
211
62
P4
690
53
H1
mm
129
129
129
21
T3
507
22
H2
mm
98
147
198
258
H gear + P4/T4 motor
High
Low
16
2.7
16
2.7
-
H5
mm
532
532
532
532
H5*
mm
548
548
548
548
Weight
kg
350
390
420
480
T4
610
45
835
E4
380
L8
581
D1 (∅
∅)
100
E5
236
L9
40
D3 (∅
∅)
63
E6
175
L10
40
E7
266
L13
420
E11
L7
L11
L15
376
376
554
373
373
253
249
249
96
269
373
218
C
F gear + P3/T3 motor
High
Low
10
1.7
10
1.7
-
E8
47.5
M4
400
E9
31
M6
121
E12
34
W1
80.6
H6
665
W2
220
L2
33
L4
427
D002090_A
062140
Note: All dimensions in mm.
Note: Weight calculated with P3, when B=300 mm.
Note: Dimensions E8, E9 and E12 with RST cubicles.
* Please, disregard the dimension H5*.
English
30/12/2011
147 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NC, REEVING: 02
English
30/12/2011
148 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
68 NORMAL HEADROOM HOIST NC, REEVING: 02, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
2000
3m/M6
2500
2m/M5
3200
1Am/M4
Hoist dimensions
HOL
Length
m
code
12
B
18
C
24
D
30
E
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
90
E1
179
H6
668
M3
11
350
E2
305
L2
33
M4
400
E gear + P3/T3 motor
High
Low
8
1.3
8
1.3
8
1.3
M1
mm
467
567
667
787
P3
597
35
C
995
E3
688
L4
427
M6
121
H2
mm
98
147
198
258
P4
690
53
D1 (∅
∅)
100
E4
380
L5
150
W1
80.6
F gear + P3/T3 motor
High
Low
10
1.7
10
1.7
-
H5
mm
532
532
532
532
T3
507
22
D3 (∅
∅)
63
E5
236
L6
2
H5*
mm
548
548
548
548
H gear + P4/T4 motor
High
Low
16
2.7
16
2.7
-
Weight
kg
470
490
530
540
T4
610
45
E6
335
L7
253
E7
266
L8
741
E8
47.5
L9
42
E9
31
L10
40
E11
36
L11
66
E12
34
L13
523
H1
97
L15
191
D003840_A
062168
Track radius
B
90 110 120 -
109
119
350
R min
2500
2000
1500
Note: All dimensions in mm.
Note: Weight calculated with P3 motor.
Note: Dimensions E8, E9 and E12 with RST cubicles.
* Please, disregard the dimension H5*.
English
30/12/2011
149 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NC, REEVING: 02, Curved Track
English
30/12/2011
150 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
69 NORMAL HEADROOM HOIST NC, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
Hoist dimensions
HOL
Length
m
code
6
B
9
C
12
D
15
E
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
80
E2
305
L5
150
450
E3
527
L6
2
Trolley dimensions
Length
E1
code
B/C
362
D
362
E
213
E gear + P3/T3 motor
High
Low
4
0.7
4
0.7
M1
mm
467
567
667
787
P3
597
35
F gear + P3/T3 motor
High
Low
5
0.8
5
0.8
M3
mm
211
211
211
62
P4
690
53
H1
mm
48.5
48.5
48.5
100.5
T3
507
22
H5
mm
555
555
555
555
H5*
mm
571
571
571
571
Weight
kg
470
490
530
540
T4
610
45
870
E4
380
L8
581
D1 (∅
∅)
100
E5
236
L9
40
D3 (∅
∅)
63
E6
175
L10
40
E7
266
L13
420
E11
L7
L11
L15
376
376
525
253
373
253
249
249
96
269
373
218
C
H2
mm
49
73
97
121
H gear + P4/T4 motor
High
Low
8
1.3
8
1.3
E8
47.5
M4
400
E9
31
M6
121
E12
34
W1
80.6
H6
638
W2
220
L2
33
L4
427
D002097_A
062143
Note: All dimensions in mm.
Note: Weight calculated with P3 motor, when B=300 mm.
Note: Dimensions E8, E9 and E12 with RST cubicles.
* Please, disregard the dimension H5*.
English
30/12/2011
151 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NC, REEVING: 04
English
30/12/2011
152 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
70 NORMAL HEADROOM HOIST NC, REEVING: 04, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
Hoist dimensions
HOL
Length
m
code
6
B
9
C
12
D
15
E
E gear + P3/T3 motor
High
Low
4
0.7
4
0.7
M1
mm
467
567
667
787
F gear + P3/T3 motor
High
Low
5
0.8
5
0.8
M3
mm
211
211
11
11
H1
mm
48.5
48.5
177.5
177.5
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P3
597
35
Trolley dimensions
B1 min
B1 max
B2 min
B2 max
C1
C2
90
E5
236
L13
600
350
E7
266
M4
400
870
E8
47.5
M6
121
1030
E9
31
W1
80.6
E3
E6
E11
527
687
175
335
376
35
80
E2
305
L7
253
450
E4
380
L10
40
Trolley dimensions
Length
E1
code
B/C
362
D/E
180
P4
690
53
T3
507
22
H2
mm
49
73
97
121
H gear + P4/T4 motor
High
Low
8
1.3
8
1.3
H5
mm
555
555
555
555
H5*
mm
571
571
571
571
Weight
kg
360
400
550
565
T4
610
45
D1 (∅
∅)
100
E12
34
D3 (∅
∅)
63
H6
638
L2
33
L8
L9
L11
L15
581
742
40
42
249
66
269
191
L4
427
L5
150
L6
2
D003841_A
062169
Track radius
B
80 110 120 -
109
119
450
R min
2500
2000
1500
Note: All dimensions in mm.
Note: Weight calculated with P3 motor.
Note: Dimensions E8, E9 and E12 with RST cubicles.
* Please, disregard the dimension H5*.
English
30/12/2011
153 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NC, REEVING: 04, Curved Track
English
30/12/2011
154 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
71 NORMAL HEADROOM HOIST ND, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
6300
1Am/M4
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
18
D
24
E
32
F
40
G
Motor dimensions
Motor
P5
M2 (mm)
722
Weight ( kg)
58
Trolley dimensions
B min
B max
120
E1
5
L12
2
610
E4
540
L17
16
M1
mm
697
817
967
1157
P6
722
85
C
1080
H6
667
M6
148
P7
762
105
D1 (∅
∅)
100
L2
33
W1
80.6
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
-
M3
mm
45
45
70
70
T5
642
45
D3 (∅
∅)
63
L4
513
H2
mm
176
235
309
403
T6
722
65
L5
150
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
-
H5
mm
625
625
625
625
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
-
H5*
mm
645
645
645
645
Weight
kg
750
820
900
960
Travelling dimensions
Motor
MF06MA
M4 (mm)
360
T7
722
71
L6
2
L7
253
L8
697
L9
40
MF06LA
400
L10
40
L11
138
D002114_A
062272
Trolley dimensions
Length
H1
code
D/E
108
F/G
83
L13
L15
494
522
177
464
Note: All dimensions in mm.
Note: Weight calculated with P6 motor, when B=300 mm.
* Please, disregard the dimension H5*.
English
30/12/2011
155 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 02
English
30/12/2011
156 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
72 NORMAL HEADROOM HOIST ND, REEVING: 02, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
6300
1Am/M4
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
18
D
24
E
32
F
40
G
Motor dimensions
Motor
P5
M2 (mm)
722
Weight ( kg)
58
Trolley dimensions
B min
B max
90
E1
38
L11
88
350
E4
540
L12
8.5
M1
mm
697
817
967
1157
P6
722
85
C
1230
H1
136
L17
16
P7
762
105
D1 (∅
∅)
100
H6
667
M3
12
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
-
H2
mm
176
235
309
403
T5
642
45
D3 (∅
∅)
63
L2
33
M6
148
H5
mm
625
625
625
625
T6
722
65
L4
513
W1
80.6
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
-
H5*
mm
645
645
645
645
T7
722
71
L5
150
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
-
Weight
kg
810
870
940
1000
Travelling dimensions
Motor
MF06MA
M4 (mm)
360
L6
2
L7
253
L8
842
MF06LA
400
L9
42
L10
40
D004135_A
062273
Trolley dimensions
Length
L13
code
D/E
520
F/G
640
Track radius
B
90 - 109
110 - 119
120 - 350
L15
184
404
R min
2500
2000
1500
Note: All dimensions in mm.
Note: Weight calculated with P5 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
157 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 02, Curved Track
English
30/12/2011
158 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
73 NORMAL HEADROOM HOIST ND, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
5000
3m/M6
6300
3m/M6
8000
3m/M6
10000
2m/M5
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
9
D
12
E
16
F
20
G
M1
mm
697
817
967
1157
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
722
85
Trolley dimensions
B min
B max
80
E1
5
L12
2
610
E4
540
L17
16
P5
722
58
C
1024
H6
643
M4
400
D1 (∅
∅)
100
L2
33
M6
148
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
M3
mm
45
45
70
70
P7
762
105
D3 (∅
∅)
63
L4
513
W1
80.6
H2
mm
88
118
156
204
T5
642
45
L5
150
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
H5
mm
649
649
649
649
T6
722
65
T7
722
71
L6
2
L7
253
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
H5*
mm
669
669
669
669
L8
697
Weight
kg
790
850
930
990
L9
40
L10
40
L11
138
D002120_A
062274
Trolley dimensions
Length
H1
code
D/E
188
F/G
163
L13
L15
494
522
177
464
Note: All dimensions in mm.
Note: Weight calculated with P6 motor, when B=300 mm.
* Please, disregard the dimension H5*.
English
30/12/2011
159 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 04
English
30/12/2011
160 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
74 NORMAL HEADROOM HOIST ND, REEVING: 04, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
5000
3m/M6
6300
3m/M6
8000
3m/M6
10000
2m/M5
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
9
D
12
E
16
F
20
G
M1
mm
697
817
967
1157
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
722
85
Trolley dimensions
B min
B max
90
E1
38
L11
88
350
E4
540
L12
8.5
P5
722
58
C
1170
H1
220
L17
16
D1 (∅
∅)
100
H6
643
M3
12
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
M3
mm
520
520
640
640
P7
762
105
D3 (∅
∅)
63
L2
33
M4
400
H1
mm
88
118
156
204
T5
642
45
L4
513
M6
148
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
H5
mm
649
649
649
649
T6
722
65
L5
150
W1
80.6
H5*
mm
669
669
669
669
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
Weight
kg
880
930
1000
1090
T7
722
71
L6
2
L7
253
L8
842
L9
42
L10
40
D004136_A
062275
Trolley dimensions
Length
L13
code
D/E
520
F/G
640
Track radius
B
90 - 109
110 - 119
120 - 350
L15
184
404
R min
2500
2000
1500
Note: All dimensions in mm.
Note: Weight calculated with P5 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
161 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 04, Curved Track
English
30/12/2011
162 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
75 NORMAL HEADROOM HOIST ND, REEVING: 06
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
6
D
8
E
10
F
13
G
Motor dimensions
Motor
MOT (mm)
Weight ( kg)
P5
578
58
Trolley dimensions
B min
B max
110
BU
288
M1
mm
558
678
828
1018
610
BUH
40
P6
578
85
C
1413
GEA
143
∅ BU
63
H4
612
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
M2
mm
33
33
33
33
P7
618
105
∅ WD
125
TF
40
H1
mm
556
556
596
596
T5
498
45
TD
716
H2
mm
53
78
98
132
T6
578
65
TH
170
T7
578
71
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
H3
mm
605
605
605
605
H3*
mm
625
625
625
625
Travelling dimensions
Motor
MF06MA
TMO (mm)
360
Weight
kg
1030
1050
1140
1195
MF06LA
400
TW
41.5
D007206_A
124578
Trolley dimensions
Length code
BF
D/E
110
F/G
370
TS
600
720
Note: All dimensions in mm.
Note: Weight calculated with P5 motor, when B=300 mm
* Please, disregard the dimension H3*.
English
30/12/2011
163 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 06
English
30/12/2011
164 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
76 NORMAL HEADROOM HOIST ND, REEVING: 06, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
6
D
8
E
10
F
13
G
Motor dimensions
Motor
MOT (mm)
Weight ( kg)
P5
578
58
Trolley dimensions
B min
B max
120
BU
288
M1
mm
558
678
828
1018
300
BUH
40
P6
578
85
∅ BU
63
H4
612
C
1568
GEA
143
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
M2
mm
33
33
33
33
P7
618
105
∅ WD
125
TF
39.5
H1
mm
556
556
596
596
T5
498
45
H2
mm
53
78
98
132
T6
578
65
T7
578
71
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
H3
mm
605
605
605
605
H3*
mm
625
625
625
625
Travelling dimensions
Motor
MF06MA
TMO (mm)
360
Weight
kg
1110
1155
1245
1300
MF06LA
400
R min
2500
TD
871
TH
170
TW
41.5
D007207_A
124579
Trolley dimensions
Length code
BF
D/E
110
F/G
370
TS
600
720
Note: All dimensions in mm.
Note: Weight calculated with P5 motor.
* Please, disregard the dimension H3*.
English
30/12/2011
165 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 06, Curved Track
English
30/12/2011
166 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
77 NORMAL HEADROOM HOIST ND, REEVING: 08
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
D
6
E
8
F
10
G
Motor dimensions
Motor
MOT (mm)
Weight ( kg)
P5
578
58
Trolley dimensions
B min
B max
110
BU
288
M1
mm
558
678
828
1018
610
BUH
40
P6
578
85
C
1413
GEA
143
∅ BU
63
H4
612
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
M2
mm
33
33
33
33
P7
618
105
∅ WD
125
TF
39.5
H1
mm
556
556
596
596
T5
498
45
H2
mm
44
53
76
98
T6
578
65
TD
716
TH
170
T7
578
71
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
H3
mm
730
730
730
730
H3*
mm
750
750
750
750
Travelling dimensions
Motor
MF06MA
TMO (mm)
360
Weight
kg
1040
1060
1150
1210
MF06LA
400
TW
41.5
D007208_A
124580
Trolley dimensions
Length code
BF
D/E
110
F/G
370
TS
600
720
Note: All dimensions in mm.
Note: Weight calculated with P5 motor, when B=300 mm.
* Please, disregard the dimension H3*.
English
30/12/2011
167 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 08
English
30/12/2011
168 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
78 NORMAL HEADROOM HOIST ND, REEVING: 08, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
D
6
E
8
F
10
G
Motor dimensions
Motor
MOT (mm)
Weight ( kg)
P5
578
58
Trolley dimensions
B min
B max
120
BU
288
M1
mm
558
678
828
1018
300
BUH
40
P6
578
85
∅ BU
63
H4
612
C
1568
GEA
143
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
M2
mm
33
33
33
33
P7
618
105
∅ WD
125
TF
39.5
H1
mm
556
556
596
596
T5
498
45
H2
mm
44
53
76
98
T6
578
65
T7
578
71
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
H3
mm
605
605
605
605
H3*
mm
625
625
625
625
Travelling dimensions
Motor
MF06MA
TMO (mm)
360
Weight
kg
1120
1170
1260
1315
MF06LA
400
R min
2500
TD
716
TH
170
TW
41.5
D007209_A
124581
Trolley dimensions
Length code
BF
D/E
110
F/G
370
TS
600
720
Note: All dimensions in mm.
Note: Weight calculated with P5 motor.
* Please, disregard the dimension H3*.
English
30/12/2011
169 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 08, Curved Track
English
30/12/2011
170 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
79 NORMAL HEADROOM HOIST ND, REEVING: 22
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
8.5
D
13
E
18
F
25
G
33.5
H
46
J
M1
mm
558
678
828
1018
1268
1618
Motor dimensions
Motor
P5
MOT (mm)
578
Weight ( kg)
58
Trolley dimensions
B min
B max
90
BU
253
610
BUH
40
M2
mm
279
339
414
509
634
809
P6
578
85
C
1200
GEA
143
BRA
mm
128
128
P7
618
105
∅ BU
63
H4
602
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
H1
mm
553
553
553
753
753
753
T5
498
45
∅ WD
100
TD
676
T6
578
65
TF
35
TH
150
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
H3
mm
595
595
595
595
595
595
T7
578
71
H3*
mm
615
615
615
615
615
615
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
Weight
kg
870
890
940
1085
1160
1245
Travelling dimensions
Motor
MF06MA
TMO (mm)
360
MF06LA
400
TW
33
D007219_A
124936
Trolley dimensions
Length
BF
code
D/E/F
113
G/H/J
-77
TS
300
500
Note: Weight calculated with P5, when B=300 mm.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
171 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 22
English
30/12/2011
172 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
80 NORMAL HEADROOM HOIST ND, REEVING: 22, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
8.5
D
13
E
18
F
25
G
33.5
H
46
J
M1
mm
558
678
828
1018
1268
1618
Motor dimensions
Motor
P5
MOT (mm)
578
Weight ( kg)
58
P6
578
85
Trolley dimensions
B min
B max
90
BU
253
350
BUH
40
C
1353
GEA
143
M2
mm
279
339
414
509
634
809
P7
618
105
∅ BU
63
H4
602
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
BRA
mm
128
128
T5
498
45
∅ WD
100
TD
829
H1
mm
553
553
553
753
753
753
T6
578
65
TF
42
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
H3
mm
595
595
595
595
595
595
H3*
mm
615
615
615
615
615
615
Weight
kg
890
945
1000
1145
1215
1330
Travelling dimensions
Motor
MF06MA
TMO (mm)
360
T7
578
71
TH
150
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
MF06LA
400
TW
30.5
D007220_A
124937
Track radius
B
90 110 120 -
109
119
350
R min
2500
2000
1500
Trolley dimensions
Length
BF
code
D/E/F
113
G/H/J
-77
TS
300
500
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
173 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 22, Curved Track
English
30/12/2011
174 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
81 NORMAL HEADROOM HOIST ND, REEVING: 24
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
6300
3m/M6
8000
3m/M6
10000
2m/M5
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
4
D
6.5
E
9
F
12.5
G
16.5
H
23
J
M1
mm
558
678
828
1018
1268
1618
Motor dimensions
Motor
P5
MOT (mm)
578
Weight ( kg)
58
Trolley dimensions
B min
B max
90
BU
253
610
BUH
40
P6
578
85
C
1365
GEA
143
M2
mm
279
339
414
509
634
809
P7
618
105
∅ BU
63
H4
602
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
BRA
mm
128
128
T5
498
45
∅ WD
100
TD
676
H1
mm
553
553
553
753
753
753
T6
578
65
TF
35
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
TH
150
T7
578
71
H3
mm
595
595
595
595
595
595
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
H3*
mm
615
615
615
615
615
615
Weight
kg
950
970
1020
1165
1240
1325
Travelling dimensions
Motor
MF06LA
TMO (mm)
400
TW
31
D007221_A
124938
Trolley dimensions
Length
BF
code
D/E/F
113
G/H/J
-77
TS
300
500
Note: Weight calculated with P5 motor, when B=300 mm.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
175 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 24
English
30/12/2011
176 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
82 NORMAL HEADROOM HOIST ND, REEVING: 24, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
6300
3m/M6
8000
3m/M6
10000
2m/M5
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
4
D
6.5
E
9
F
12.5
G
16.5
H
23
J
Motor dimensions
Motor
MOT (mm)
Weight ( kg)
Trolley dimensions
B min
B max
90
BU
253
350
BUH
40
M1
mm
558
678
828
1018
1268
1618
P5
578
58
P6
578
85
C
1518
GEA
143
∅ BU
63
H4
602
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
M2
mm
279
339
414
509
634
809
BRA
mm
128
128
P7
618
105
T5
498
45
∅ WD
100
TD
829
TF
42
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
H1
mm
553
553
553
753
753
753
H3
mm
595
595
595
595
595
595
T6
578
65
TH
150
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
H3*
mm
615
615
615
615
615
615
Weight
kg
980
1025
1075
1220
1295
1405
Travelling dimensions
Motor
MF06LA
TMO (mm)
400
T7
578
71
TW
31
D007222_A
124939
Track radius
B
90 - 109
110 - 119
120 - 350
R min
2500
2000
1500
Trolley dimensions
Length
code
D/E/F
G/H/J
BF
TS
113
-77
300
500
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
177 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 24, Curved Track
English
30/12/2011
178 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
83 NORMAL HEADROOM HOIST ND, REEVING: 26
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
4
E
6
F
8
G
11
H
15
J
M1
mm
678
828
1018
1268
1618
Motor dimensions
Motor
P5
MOT (mm)
578
Weight ( kg)
58
P6
578
85
Trolley dimensions
B min
B max
100
BU
288
610
BUH
40
C
1408
GEA
143
M2
mm
339
414
509
634
809
P7
618
105
∅ BU
63
H4
602
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
BRA
mm
128
128
T5
498
45
∅ WD
125
TD
716
H1
mm
588
588
788
788
788
T6
578
65
TF
40
TH
170
T7
578
71
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
H3
mm
595
595
595
595
595
H3*
mm
615
615
615
615
615
Travelling dimensions
Motor
MF06MA
TMO (mm)
360
Weight
kg
990
1010
1060
1205
1280
MF06LA
400
TW
41.5
D007223_A
124940
Trolley dimensions
Length
BF
code
E/F
113
G/H/J
-77
TS
300
500
Note: Weight calculated with P5 motor, when B=300 mm.
Note: All dimensions in mm.
Note: gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
179 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 26
English
30/12/2011
180 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
84 NORMAL HEADROOM HOIST ND, REEVING: 26, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
HOL
m
4
6
8
11
15
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
Length
M1
code
mm
E
678
F
828
G
1018
H
1268
J
1618
Motor dimensions
Motor
P5
MOT (mm)
578
Weight ( kg)
58
Trolley dimensions
B min
B max
120
BU
288
300
BUH
40
P6
578
85
C
1563
GEA
143
M2
mm
339
414
509
634
809
P7
618
105
∅ BU
63
H4
602
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
BRA
mm
128
128
T5
498
45
∅ WD
125
TD
871
H1
mm
588
588
788
788
788
T6
578
65
H3
mm
595
595
595
595
595
T7
578
71
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
H3*
mm
615
615
615
615
615
Weight
kg
1115
1165
1310
1385
1495
Travelling dimensions
Motor
MF06MA
TMO (mm)
360
MF06LA
400
R min
2500
TF
40
TH
170
TW
41.5
D007224_A
124941
Trolley dimensions
Length
BF
code
E/F
113
G/H/J
-77
TS
300
500
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
181 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 26, Curved Track
English
30/12/2011
182 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
85 NORMAL HEADROOM HOIST ND, REEVING: 28
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
F
6
G
8
H
11.5
J
Motor dimensions
Motor
MOT (mm)
Weight ( kg)
Trolley dimensions
B min
B max
100
BU
288
610
BUH
40
M1
mm
828
1018
1268
1618
P5
578
58
P6
578
85
C
1408
GEA
143
∅ BU
63
H4
602
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
M2
mm
414
509
634
809
P7
618
105
∅ WD
125
TD
716
BRA
mm
128
128
T5
498
45
TF
40
H1
mm
588
788
788
788
T6
578
65
TH
170
H3
mm
595
595
595
595
T7
578
71
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
H3*
mm
615
615
615
615
Weight
kg
1075
1220
1295
1380
Travelling dimensions
Motor
MF06MA
TMO (mm)
360
MF06LA
400
TW
41.5
D007225_A
124942
Trolley dimensions
Length
BF
code
F
113
G/H/J
-77
TS
300
500
Note: Weight calculated with P5 motor, when B=300 mm.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
183 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 28
English
30/12/2011
184 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
86 NORMAL HEADROOM HOIST ND, REEVING: 28, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
F
6
G
8
H
11.5
J
Motor dimensions
Motor
MOT (mm)
Weight ( kg)
Trolley dimensions
B min
B max
120
BU
288
300
BUH
40
M1
mm
828
1018
1268
1618
P5
578
58
P6
578
85
C
1563
GEA
143
∅ BU
63
H4
602
M2
mm
414
509
634
809
P7
762
105
∅ WD
125
TD
871
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
BRA
mm
128
128
T5
642
45
H1
mm
588
788
788
788
T6
578
65
H3
mm
595
595
595
595
T7
578
71
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
H3*
mm
615
615
615
615
Weight
kg
1180
1325
1400
1510
Travelling dimensions
Motor
MF06MA
TMO (mm)
360
MF06LA
400
R min
2500
TF
40
TH
170
TW
41.5
D007226_A
124943
Trolley dimensions
Length
BF
code
F
113
G/H/J
-77
TS
300
500
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
185 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 28, Curved Track
English
30/12/2011
186 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
87 NORMAL HEADROOM HOIST NE, REEVING: 02
Hoisting speed (m/min)
Load
kg
6300
8000
10000
E gear
High
Low
8
1.3
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
Length
m
code
15.5
C
21
D
28
E
36
F
47
G
61
H
80.5
J
97
K
E11
mm
605
605
605
605
605
605
1064
1064
F gear
High
Low
10
1.7
P6/T6 motor
P6/T6 motor
P7/T7 motor
M1
mm
462
562
682
832
1022
1272
1622
1922
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
Trolley dimensions
B1 min
B1 max
B2 min
B2 max
C
180
E3
126
L1
1588.5
M4
409
320
E4
600
L2
41.5
M5
44
1752
E5
315
L4
707
M6
218
120
E1
605
H5
832.5
L12
52.5
610
E2
600
H6
756
L14
36.5
P7
576
105
M3
mm
610
610
560
560
640
640
600
600
P8
711
106
G gear
High
Low
12.5
2
P7/T7 motor
P7/T7 motor
P8/T8 motor
L13
mm
1310
1310
1540
1540
2050
2050
1910
1910
T6
536
65
D1 (∅
∅)
125
E6
272
L5
170
D3 (∅
∅)
63
E7
435
L6
1.5
L15
mm
200
200
200
200
200
200
659
659
H gear
High
Low
16
T8 motor
T8 motor
T9 motor
H1
mm
550
550
500
500
580
580
540
540
T7
536
71
H2
mm
139
188
251
322
421
546
721
868
T8
536
81
J gear
High
Low
20
T9 motor
T9 motor
TA motor
Weight A
kg
2000
2000
2200
2300
2500
2700
3100
3300
Weight B
kg
2200
2300
2400
2500
2700
2900
3400
3600
T9
536
92
TA
576
106
Min R
2500
E8
247
L7
288
E9
400
L8
946
E10
206
L9
34.5
H3
104.5
L10
40
H4
121.5
L11
200
D006985_A
103527
Note: Weight calculated with P6 motor when B=300 mm.
Note: All dimensions in mm.
Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension.
Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option).
English
30/12/2011
187 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NE, REEVING: 02
Electric panel size for hoists with Crane electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
* Inverter in bridge panel.
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
600x600
600x600
1000x600
600x600*
600x600 +
600x400
600x600*
1000x600
1000x600
1000x600 +
600x400
600x600*
600x600*
600x600*
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
1000x600
1000x600
1000x600
1000x600 +
1000x600
1000x600 +
600x400
1000x600 +
1000x600
1000x600
1000x600
1000x600 +
600x400
1000x600 +
1000x600**
1000x600 +
600x400
1000x600 +
1000x600**
Electric panel size for hoists with Solo electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
**Transformer in bridge panel.
Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory.
Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option).
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
188 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
88 NORMAL HEADROOM HOIST NE, REEVING: 04
Hoisting speed (m/min)
Load
kg
12500
16000
20000
E gear
High
Low
4
0.7
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
Length
m
code
7.5
C
10.5
D
14
E
18
F
23.5
G
30.5
H
40
J
48.5
K
E11
mm
605
605
1085
1085
1255
1255
1574
1574
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
M1
mm
462
562
682
832
1022
1272
1622
1922
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
Trolley dimensions
B1 min
B1 max
B2 min
B2 max
C
180
E3
126
L1
1588.5
M4
429
320
E4
600
L2
53
M5
44
1762
E5
315
L4
707
M6
218
120
E1
605
H5
832.5
L12
52.5
610
E2
600
H6
756
L14
46.5
P7
576
105
M3
mm
610
610
560
560
640
640
600
600
P8
711
106
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
L13
mm
1310
1310
1060
1060
1400
1400
1400
1400
H1
mm
550
550
500
500
580
580
540
540
T6
536
65
D1 (∅
∅)
180
E6
282
L5
207
D3 (∅
∅)
80
E7
435
L6
6
L15
mm
200
200
680
680
850
850
1169
1169
T7
536
71
H2
mm
69
94
125
161
210
273
360
434
T8
536
81
J gear
High
Low
10
T9 motor
T9 motor
TA motor
Weight A
kg
2300
2300
2500
2600
2800
3000
3400
3600
T9
536
92
Weight B
kg
2500
2600
2700
2800
3000
3200
3600
3900
TA
576
106
Min R
4000
E8
282
L7
343
E9
400
L8
955
E10
206
L9
44.5
H3
104.5
L10
51.5
H4
121.5
L11
200
D006986_A
103528
Note: Weight calculated with P6 motor when B=300 mm.
Note: All dimensions in mm.
Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension.
Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option).
English
30/12/2011
189 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NE, REEVING: 04
Electric panel size for hoists with Crane electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
* Inverter in bridge panel.
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
600x600
600x600
1000x600
600x600*
600x600 +
600x400
600x600*
1000x600
1000x600
1000x600 +
600x400
600x600*
600x600*
600x600*
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
1000x600
1000x600
1000x600
1000x600 +
1000x600
1000x600 +
600x400
1000x600 +
1000x600
1000x600
1000x600
1000x600 +
600x400
1000x600 +
1000x600**
1000x600 +
600x400
1000x600 +
1000x600**
Electric panel size for hoists with Solo electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
**Transformer in bridge panel.
Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory.
Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option).
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
190 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
89 NORMAL HEADROOM HOIST NE, REEVING: 06
Hoisting speed (m/min)
Load
kg
20000
25000
30000
E gear
High
Low
2.5
0.4
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
Length
m
code
5
C
7
D
9
E
12
F
15.5
G
20
H
26.5
J
32
K
E11
mm
605
605
1085
1085
1255
1255
1574
1574
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
M1
mm
462
562
682
832
1022
1272
1622
1922
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
Trolley dimensions
B1 min
B1 max
B2 min
B2 max
C
180
E3
126
L1
1588.5
M4
429
320
E4
600
L2
53
M5
44
1881
E5
315
L4
707
M6
218
120
E1
605
H5
832.5
L12
52.5
610
E2
600
H6
756
L14
46.5
P7
576
105
M3
mm
610
610
560
560
640
640
600
600
P8
711
106
G gear
High
Low
4
0.7
P7/T7 motor
P7/T7 motor
P8/T8 motor
L13
mm
1310
1310
1060
1060
1400
1400
1400
1400
T6
536
65
D1 (∅
∅)
180
E6
282
L5
207
D3 (∅
∅)
80
E7
435
L6
6
L15
mm
200
200
680
680
850
850
1169
1169
T7
536
71
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
H1
mm
550
550
500
500
580
580
540
540
H2
mm
46
63
84
107
140
182
240
289
T8
536
81
J gear
High
Low
6.3
T9 motor
T9 motor
TA motor
Weight A
kg
2400
2400
2600
2700
2900
3100
3500
3700
T9
536
92
Weight B
kg
2600
2700
2800
2900
3100
3300
3700
4000
TA
576
106
Min R
4000
E8
282
L7
343
E9
400
L8
955
E10
206
L9
44.5
H3
104.5
L10
51.5
H4
121.5
L11
200
D006987_A
103529
Note: Weight calculated with P6 motor when B=300 mm.
Note: All dimensions in mm.
Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension.
Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option).
English
30/12/2011
191 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NE, REEVING: 06
Electric panel size for hoists with Crane electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
* Inverter in bridge panel.
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
600x600
600x600
1000x600
600x600*
600x600 +
600x400
600x600*
1000x600
1000x600
1000x600 +
600x400
600x600*
600x600*
600x600*
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
1000x600
1000x600
1000x600
1000x600 +
1000x600
1000x600 +
600x400
1000x600 +
1000x600
1000x600
1000x600
1000x600 +
600x400
1000x600 +
1000x600**
1000x600 +
600x400
1000x600 +
1000x600**
Electric panel size for hoists with Solo electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
**Transformer in bridge panel.
Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory.
Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option).
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
192 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
90 NORMAL HEADROOM HOIST NE, REEVING: 22
Hoisting speed (m/min)
Load
kg
6300
8000
10000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
HOL*
m
m
16.5
9
22
14.5
29.5
22
39
31.5
52
44.5
63.5
56
77
69.5
86.5
79
98
90.5
*HOL with drum brake
E gear
High
Low
8
1.3
P6/T6 motor
P6/T6 motor
P6/T6 motor
Length
code
E
F
G
H
J
K
L
M
N
F gear
High
Low
10
1.7
P6/T6 motor
P6/T6 motor
P7/T7 motor
E1
mm
605
605
605
605
605
925
925
860
860
M1
mm
682
832
1022
1272
1622
1922
2272
2522
2822
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
Trolley dimensions
B1 min
B1 max
B2 min
B2 max
C
180
E4
600
L2
41.5
320
E5
315
L4
707
1729
E6
272
L5
170
120
E2
600
H6
732.5
M5
44
610
E3
126
L1
1542
M6
218
P7
576
105
G gear
High
Low
12.5
2.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
M3
mm
314
239
144
319
144
-306
-481
-306
-456
P8
711
106
T6
536
65
D1 (∅
∅)
125
E7
435
L6
1.5
D3 (∅
∅)
63
E8
247
L7
288
H1
mm
655
655
655
955
955
655
655
955
955
T7
536
71
H gear
High
Low
16
T8 motor
T8 motor
T9 motor
L11
mm
195
195
195
195
195
520
520
495
495
J gear
High
Low
20
T9 motor
T9 motor
TA motor
Weight A
kg
2000
2100
2300
2500
2800
3000
3300
3600
3800
T8
536
81
T9
536
92
Weight B
kg
2200
2300
2500
2800
3100
3300
3600
4000
4300
TA
576
106
Min R
2500
E9
400
L8
946
E10
162
L9
34.7
H3
81.5
L10
40
H4
100.5
L12
52.5
H5
809.5
M4
409
D006895_A
101302
Note: Weight calculated with P6 motor when B=300 mm.
Note: All dimensions in mm.
Note: Dimensions B1 min, B1 max, E6 and Weight A for normal track suspension.
Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option).
English
30/12/2011
193 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NE, REEVING: 22
Electric panel size for hoists with Crane electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
* Inverter in bridge panel.
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
600x600
600x600
1000x600
600x600*
600x600 +
600x400
600x600*
1000x600
1000x600
1000x600 +
600x400
600x600*
600x600*
600x600*
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
1000x600
1000x600
1000x600
1000x600 +
1000x600
1000x600 +
600x400
1000x600 +
1000x600
1000x600
1000x600
1000x600 +
600x400
1000x600 +
1000x600**
1000x600 +
600x400
1000x600 +
1000x600**
Electric panel size for hoists with Solo electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
**Transformer in bridge panel.
Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory.
Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option).
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
194 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
91 NORMAL HEADROOM HOIST NE, REEVING: 24
Hoisting speed (m/min)
Load
kg
12500
16000
20000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
E gear
High
Low
4
0.7
P6/T6 motor
P6/T6 motor
P6/T6 motor
Hoist dimensions
HOL
HOL*
m
m
8
4
11
7
14.5
10.5
19.5
15.5
26
22
31.5
27.5
38.5
34.5
43
39
49
45
*HOL with drum brake
Length
code
E
F
G
H
J
K
L
M
N
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
E1
mm
605
605
605
605
605
925
925
860
860
M1
mm
682
832
1022
1272
1622
1922
2272
2522
2822
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
Trolley dimensions
B1 min
B1 max
B2 min
B2 max
C
180
E4
600
L2
41.5
320
E5
315
L4
707
2037
E6
272
L5
170
120
E2
600
H6
732.5
M5
44
610
E3
126
L1
1542
M6
218
P7
576
105
P8
711
106
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
M3
mm
314
239
144
319
144
-306
-481
-306
-456
T6
536
65
D1 (∅
∅)
125
E7
435
L6
1.5
D3 (∅
∅)
63
E8
247
L7
288
H1
mm
655
655
655
955
955
655
655
955
955
T7
536
71
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
L11
mm
195
195
195
195
195
520
520
495
495
J gear
High
Low
10
T9 motor
T9 motor
TA motor
Weight A
kg
2100
2200
2400
2600
2900
3100
3400
3700
3900
T8
536
81
T9
536
92
Weight B
kg
2300
2400
2600
2900
3100
3400
3700
4100
4300
TA
576
106
Min R
2500
E9
400
L8
946
E10
162
L9
34.7
H3
81.5
L10
40
H4
100.5
L12
52.5
H5
809.5
M4
409
D006896_A
101303
Note: Weight calculated with P6 motor when B=300 mm.
Note: All dimensions in mm.
Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension.
Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option).
English
30/12/2011
195 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NE, REEVING: 24
Electric panel size for hoists with Crane electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
* Inverter in bridge panel.
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
600x600
600x600
1000x600
600x600*
600x600 +
600x400
600x600*
1000x600
1000x600
1000x600 +
600x400
600x600*
600x600*
600x600*
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
1000x600
1000x600
1000x600
1000x600 +
1000x600
1000x600 +
600x400
1000x600 +
1000x600
1000x600
1000x600
1000x600 +
600x400
1000x600 +
1000x600**
1000x600 +
600x400
1000x600 +
1000x600**
Electric panel size for hoists with Solo electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
**Transformer in bridge panel.
Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory.
Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option).
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
196 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
92 NORMAL HEADROOM HOIST NE, REEVING: 26
Hoisting speed (m/min)
Load
kg
20000
25000
30000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
E gear
High
Low
2.5
0.4
P6/T6 motor
P6/T6 motor
P6/T6 motor
Hoist dimensions
HOL
HOL*
m
m
5.5
3
7
4.5
9.5
7
13
11.5
17
14.5
21
18.5
25.5
23
28.5
26
32.5
30
*HOL with drum brake
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B1 min
B1 max
130
E2
600
H6
732.5
M5
44
610
E3
126
L1
1542
M6
218
Length
code
E
F
G
H
J
K
L
M
N
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
E1
mm
605
605
605
605
605
925
925
860
860
P6
536
85
M1
mm
682
832
1022
1272
1622
1922
2272
2522
2822
P7
576
105
P8
711
106
B2 min
B2 max
C
180
E4
600
L2
53
320
E5
315
L4
707
2086
E6
282
L5
208
G gear
High
Low
4
0.7
P7/T7 motor
P7/T7 motor
P8/T8 motor
M3
mm
314
239
144
319
144
-306
-481
-306
-456
T6
536
65
D1 (∅
∅)
180
E7
435
L6
6
D3 (∅
∅)
80
E8
257
L7
343
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
H1
mm
655
655
655
955
955
655
655
955
955
T7
536
71
J gear
High
Low
6.3
T9 motor
T9 motor
TA motor
L11
mm
195
195
195
195
195
520
520
495
495
Weight A
kg
2400
2500
2700
2900
3200
3400
3700
4000
4200
Weight B
kg
2600
2700
2900
3200
3500
3700
4000
4400
4700
T8
536
81
T9
536
92
TA
576
106
Min R
4000
E9
400
L8
956
E10
162
L9
44.5
H3
81.5
L10
51.5
H4
100.5
L12
52.5
H5
809.5
M4
429
D006897_A
101304
Note: Weight calculated with P6 motor when B=300 mm.
Note: All dimensions in mm.
Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension.
Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option).
English
30/12/2011
197 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NE, REEVING: 26
Electric panel size for hoists with Crane electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
* Inverter in bridge panel.
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
600x600
600x600
1000x600
600x600*
600x600 +
600x400
600x600*
1000x600
1000x600
1000x600 +
600x400
600x600*
600x600*
600x600*
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
1000x600
1000x600
1000x600
1000x600 +
1000x600
1000x600 +
600x400
1000x600 +
1000x600
1000x600
1000x600
1000x600 +
600x400
1000x600 +
1000x600**
1000x600 +
600x400
1000x600 +
1000x600**
Electric panel size for hoists with Solo electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
**Transformer in bridge panel.
Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory.
Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option).
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
198 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
93 NORMAL HEADROOM HOIST NE, REEVING: 28
Hoisting speed (m/min)
Load
kg
32000
40000
Class
Fem/ISO
2m/M5
1Am/M4
Hoist dimensions
HOL
HOL*
m
m
5.5
3.5
7
5
9.5
7.5
13
11
15.5
13.5
19
17
21.5
19.5
24.5
22.5
*HOL with drum brake
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B1 min
B1 max
130
E2
600
H6
732.5
M5
44
610
E3
126
L1
1542
M6
218
E gear
High
Low
2
0.3
P6/T6 motor
P6/T6 motor
Length
code
F
G
H
J
K
L
M
N
F gear
High
Low
2.5
0.4
P7/T7 motor
P7/T7 motor
E1
mm
605
605
605
605
925
925
860
860
P6
536
85
M1
mm
832
1022
1272
1622
1922
2272
2522
2822
P7
576
105
P8
711
106
B2 min
B2 max
C
180
E4
600
L2
53
320
E5
315
L4
707
2212
E6
282
L5
208
D1 (∅
∅)
180
E7
435
L6
6
G gear
High
Low
3.2
0.5
T8 motor
P8/T8 motor
M3
mm
239
144
319
144
-306
-481
-306
-456
H1
mm
655
655
955
955
655
655
955
955
T6
536
65
T7
536
71
D3 (∅
∅)
80
E8
257
L7
343
H gear
High
Low
4
T9 motor
T9 motor
L11
mm
195
195
195
195
520
520
495
495
J gear
High
Low
5
TA motor
TA motor
Weight A
kg
2700
2800
3000
3300
3500
3800
4100
4400
T8
536
81
T9
536
92
Weight B
kg
2900
3000
3300
3600
3900
4200
4500
4800
TA
576
106
Min R
4000
E9
400
L8
956
E10
162
L9
44.5
H3
81.5
L10
51.5
H4
100.5
L12
52.5
H5
809.5
M4
429
D006898_A
101305
Note: Weight calculated with P6 motor when B=300 mm.
Note: All dimensions in mm.
Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension.
Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option).
English
30/12/2011
199 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist NE, REEVING: 28
Electric panel size for hoists with Crane electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
* Inverter in bridge panel.
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
600x600
600x600
1000x600
600x600*
600x600 +
600x400
600x600*
1000x600
1000x600
1000x600 +
600x400
600x600*
600x600*
600x600*
2-speed
--or-MicroDrive
TravelMaster 3
power rating
002
TravelMaster 3
power ratings
003-004
TravelMaster 3
power ratings
005-007
TravelMaster 2p
power ratings
002-005
TravelMaster 2p
power ratings
007-011
1000x600
1000x600
1000x600
1000x600 +
1000x600
1000x600 +
600x400
1000x600 +
1000x600
1000x600
1000x600
1000x600 +
600x400
1000x600 +
1000x600**
1000x600 +
600x400
1000x600 +
1000x600**
Electric panel size for hoists with Solo electric provisions
Trolley travel control type
Electric panel size + additional panel size
Main voltage 400V or 460V
Electric panel size + additional panel size
Other main voltages
**Transformer in bridge panel.
Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory.
Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option).
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
200 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
FIXED HOIST
English
30/12/2011
201 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
English
30/12/2011
202 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
94 FIXED HOIST NB, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
800
3m/M6
1000
2m/M5
1250
3m/M6
1600
2m/M5
Hoist dimensions
HOL
Length
m
code
12
A
19
C
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
F gear + P1/T1 motor
High
Low
10
1.7
10
1.7
-
M1
mm
431
561
P1
498
21
P2
558
31
H2
mm
90
144
F gear + P2/T2 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
R
mm
400
530
P3
588
35
G gear + P2/T2 motor
High
Low
12.5
2.1
12.5
2.1
12.5
2.1
12.5
2.1
H5
mm
448
448
T1
498
22
H5*
mm
463
463
T2
498
22
H gear + P3/T3 motor
High
Low
16
2.7
16
2.7
16
2.7
16
2.7
Weight
kg
125
135
T3
498
22
Trolley dimensions
C
D1 (∅
∅)
195
E1
4
L11
25
18
E2
305
L12
15
E3
77.5
M3
42
E4
380
M6
115
E5
236
H1
127
H3
135
H4
155
H6
391
L4
376
L8
35
L9
100
D002071_A
062131
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
203 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NB, REEVING: 02
English
30/12/2011
204 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
95 FIXED HOIST NB, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
1600
3m/M6
2000
2m/M5
2500
3m/M6
3200
2m/M5
F gear + P1/T1 motor
High
Low
5
0.8
5
0.8
-
Hoist dimensions
HOL
m
6
9.5
Length
code
A
C
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P1
498
21
F gear + P2/T2 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
M1
mm
431
561
P2
558
31
H2
mm
45
72
H5
mm
461
461
P3
588
35
G gear + P2/T2 motor
High
Low
6.3
1.1
6.3
1.1
6.3
1.1
6.3
1.1
H5*
mm
476
476
T1
498
22
T2
498
22
R
mm
400
530
H gear + P3/T3 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
Weight
kg
130
140
T3
498
22
Trolley dimensions
C
D1(∅
∅)
145
E1
4
L11
25
18
E2
305
L12
15
E3
77.5
M3
42
E4
380
M6
115
E5
236
H1
182
H3
148
H4
142
H6
378
L4
376
L8
35
L9
100
D002078_A
062132
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
205 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NB, REEVING: 04
English
30/12/2011
206 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
96 FIXED HOIST NC, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
2000
3m/M6
2500
2m/M5
3200
1Am/M4
Hoist dimensions
HOL
Length
m
code
12
B
18
C
24
D
30
E
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
E gear + P3/T3 motor
High
Low
8
1.3
8
1.3
8
1.3
M1
mm
467
567
667
787
P3
597
35
M3
mm
158
58
58
58
P4
690
53
T3
507
22
F gear + P3/T3 motor
High
Low
10
1.7
10
1.7
-
H1
mm
239
139
139
139
H2
mm
98
147
196
256
R
mm
560
560
780
780
H gear + P4/T4 motor
High
Low
16
2.7
16
2.7
-
H5
mm
528
528
528
528
H5*
mm
544
544
544
544
Weight
kg
195
205
220
240
T4
610
45
Trolley dimensions
C
D1 (∅
∅)
240
E1
96
L11
20
18
E2
305
L12
13
E3
147.5
M6
121
E4
380
E5
236
H3
96.5
H4
233.5
H6
459.5
L4
427
L5
11.5
L8
45
L9
120
D002086_A
062134
Note: All dimensions in mm.
Note: Weight calculated with P3 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
207 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NC, REEVING: 02
English
30/12/2011
208 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
97 FIXED HOIST NC, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
6300
1Am/M4
E gear + P3/T3 motor
High
Low
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
6
B
9
C
12
D
15
E
M1
mm
467
567
667
787
Motor dimensions
Motor
P3
M2 (mm)
597
Weight ( kg)
35
P4
690
53
Trolley dimensions
C1
C2
215
E1
96
L11
20
232
E2
305
L12
13
D1 (∅
∅)
18
E3
147.5
M6
121
M3
mm
158
58
58
58
T3
507
22
E4
380
F gear + P3/T3 motor
High
Low
5
0.8
5
0.8
-
R
mm
560
560
780
780
H1
mm
319.5
219.5
219.5
219.5
H2
mm
49
73
97
127
H gear + P4/T4 motor
High
Low
8
1.3
8
1.3
-
H5
mm
551
551
551
551
H5*
mm
567
567
567
567
Weight
kg
200
210
220
230
T4
610
45
E5
236
H3
120
H4
210
H6
436
L4
427
L5
11.5
L8
45
L9
120
D002091_A
062135
Note: All dimensions in mm.
Note: Weight calculated with P3 motor.
* Please, disregard the dimension H5*.
English
30/12/2011
209 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NC, REEVING: 04
English
30/12/2011
210 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
98 FIXED HOIST ND, REEVING: 02
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
6300
1Am/M4
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
18
D
24
E
32
F
40
G
M1
mm
697
817
967
1157
Motor dimensions
Motor
P5
M5 (mm)
722
Weight ( kg)
58
Trolley dimensions
C
D1 (∅
∅)
366
L1
1142
18
L2
531
M2
mm
830
830
1170
1170
P6
722
85
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
-
M3
mm
81
81
271
81
P7
762
105
M4
mm
-53
67
67
67
T5
642
45
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
-
H2
mm
176
235
310
405
T6
722
65
H3
mm
201
81
81
81
L6
mm
831
831
831
831
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
-
L6*
mm
851
851
851
851
Weight
kg
430
445
460
480
T7
722
71
H1
153
L3
513
L4
18
L5
210
L7
25
L8
430
L9
175
L10
147
D002111_A
062189
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
* Please, disregard the dimension L6*.
English
30/12/2011
211 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 02
English
30/12/2011
212 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
99 FIXED HOIST ND, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
5000
3m/M6
6300
3m/M6
8000
3m/M6
10000
2m/M5
12500
1Am/M4
Hoist dimensions
HOL
Length
m
code
9
D
12
E
16
F
20
G
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
4
0.7
4
0.7
M1
mm
697
817
967
1157
Motor dimensions
Motor
P5
M4 (mm)
722
Weight ( kg)
58
Trolley dimensions
C1
C2
310
L1
1142
367
L2
531
M2
mm
830
830
1170
1170
P6
722
85
D1 (∅
∅)
18
L3
513
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
5
0.8
-
M3
mm
81
81
271
81
P7
762
105
M4
mm
-53
67
67
67
T5
642
45
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
8
1.3
-
H2
mm
88
118
156
204
T6
722
65
H3
mm
201
81
81
81
L6
mm
841
841
841
841
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
10
1.7
-
L6*
mm
861
861
861
861
Weight
kg
445
460
480
500
T7
722
71
H1
233
L4
18
L5
193
L7
25
L8
430
L9
175
L10
147
D002116_A
062190
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
* Please, disregard the dimension L6*.
English
30/12/2011
213 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 04
English
30/12/2011
214 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
100 FIXED HOIST ND, REEVING: 06
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
Hoist dimensions
HOL
Length
m
code
6
D
8
E
10
F
13
G
Motor dimensions
Motor
MOT (mm)
Weight (kg)
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
M1
mm
558
678
828
1018
P5
578
58
M2
mm
548
648
803
933
P6
578
85
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
Min R
mm
1200
1400
1700
2000
P7
618
105
H1
mm
515
615
770
900
T5
498
45
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
H2
mm
53
78
98
132
T6
578
65
H3
mm
605
605
605
605
H3*
mm
625
625
625
625
Weight
kg
585
625
675
735
T7
578
71
Trolley dimensions
C
∅F
693
E1
406
18
E3
60
E8
170
F1
200
F2
440
F3
70
GEA
143
H4
270
RO
70
TH
527
D007242_A
126313
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: M2 and weight calculated with Min R.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
* Please, disregard the dimension H3*.
English
30/12/2011
215 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 06
English
30/12/2011
216 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
101 FIXED HOIST ND, REEVING: 08
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
Hoist dimensions
HOL
Length
m
code
4.5
D
6
E
8
F
10
G
Motor dimensions
Motor
MOT (mm)
Weight (kg)
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
M1
mm
558
678
828
1018
P5
578
58
M2
mm
548
648
803
933
P6
578
85
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
Min R
mm
1200
1400
1700
2000
P7
618
105
H1
mm
515
615
770
900
T5
498
45
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
H2
mm
44
53
76
98
T6
578
65
H3
mm
605
605
605
605
H3*
mm
625
625
625
625
Weight
kg
600
635
690
750
T7
578
71
Trolley dimensions
C
∅F
693
E1
406
18
E3
60
E8
170
F1
200
F2
440
F3
70
GEA
143
H4
270
RO
70
TH
527
D007243_A
126314
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: M2 and weight calculated with Min R.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
* Please, disregard the dimension H3*.
English
30/12/2011
217 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 08
English
30/12/2011
218 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
102 FIXED HOIST ND, REEVING: 22
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
Hoist dimensions
HOL
Length
m
code
8.5
D
13
E
18
F
25
G
33.5
H
46
J
Motor dimensions
Motor
MOT (mm)
Weight (kg)
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
M1
mm
558
678
828
1018
1268
1618
P5
578
58
M2
mm
321
261
186
91
216
41
P6
578
85
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
Min R
mm
1200
1200
1200
1200
1700
1700
P7
618
105
BRA
mm
128
128
T5
498
45
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
H3
mm
605
605
605
605
605
605
T6
578
65
H3*
mm
625
625
625
625
625
625
Weight
kg
505
530
555
590
670
730
T7
578
71
Trolley dimensions
C
∅F
523
E1
406
18
E3
60
E8
170
F1
200
F2
440
F3
70
GEA
143
H4
270
RO
70
TH
527
D007244_A
126316
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: M2 and weight calculated with Min R.
Note: Standard rail gauges: 1200 and 1700.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
219 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 22
English
30/12/2011
220 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
103 FIXED HOIST ND, REEVING: 24
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
8000
3m/M6
10000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
D
6.5
E
9
F
12.5
G
16.5
H
23
J
Motor dimensions
Motor
MOT (mm)
Weight (kg)
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
M1
mm
558
678
828
1018
1268
1618
P5
578
58
P6
578
85
M2
mm
321
261
186
91
216
41
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
Min R
mm
1200
1200
1200
1200
1700
1700
P7
618
105
BRA
mm
128
128
T5
498
45
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
H3
mm
605
605
605
605
605
605
T6
578
65
H3*
mm
625
625
625
625
625
625
Weight
kg
570
590
620
655
735
795
T7
578
71
Trolley dimensions
C
∅F
688
E1
406
18
E3
60
E8
170
F1
200
F2
440
F3
70
GEA
143
H4
270
RO
70
TH
527
D007245_A
126317
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: M2 and weight calculated with Min R.
Note: Standard rail gauges: 1200 and 1700.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
221 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 24
English
30/12/2011
222 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
104 FIXED HOIST ND, REEVING: 26
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
E
6
F
8
G
11
H
15
J
Motor dimensions
Motor
MOT (mm)
Weight (kg)
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
M1
mm
678
828
1018
1268
1618
P5
578
58
M2
mm
261
186
91
216
41
P6
578
85
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
Min R
mm
1200
1200
1200
1700
1700
P7
618
105
BRA
mm
128
128
T5
498
45
J gear + P7/T6 motor
High
Low
6.3
1.1
6.3
1.1
H3
mm
605
605
605
605
605
T6
578
65
H3*
mm
625
625
625
625
625
Weight
kg
600
625
665
745
805
T7
578
71
Trolley dimensions
C
∅F
688
E1
406
18
E3
60
E8
170
F1
200
F2
440
F3
70
GEA
143
H4
270
RO
70
TH
527
D007246_A
126318
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: M2 and weight calculated with Min R.
Note: Standard rail gauges: 1200 and 1700.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
223 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 26
English
30/12/2011
224 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
105 FIXED HOIST ND, REEVING: 28
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
F
6
G
8
H
11.5
J
Motor dimensions
Motor
MOT (mm)
Weight (kg)
M1
mm
828
1018
1268
1618
P5
578
58
M2
mm
186
91
216
41
P6
578
85
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
Min R
mm
1200
1200
1700
1700
P7
618
105
BRA
mm
128
128
T5
498
45
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
H3
mm
605
605
605
605
T6
578
65
H3*
mm
625
625
625
625
Weight
kg
640
675
755
815
T7
578
71
Trolley dimensions
C
∅F
688
E1
406
18
E3
60
E8
170
F1
200
F2
440
F3
70
GEA
143
H4
270
RO
70
TH
527
D007247_A
126319
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: M2 and weight calculated with Min R.
Note: Standard rail gauges: 1200 and 1700.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H3*.
English
30/12/2011
225 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 28
English
30/12/2011
226 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
106 FIXED HOIST NE, REEVING: 02
Hoisting speed (m/min)
Load
kg
6300
8000
10000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
m
15.5
21
28
36
47
61
80.5
97
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
E gear
High
Low
8
1.3
P6/T6 motor
P6/T6 motor
P6/T6 motor
Length
code
C
D
E
F
G
H
J
K
P6
536
85
F gear
High
Low
10
1.7
P6/T6 motor
P6/T6 motor
P7/T7 motor
R
mm
1550
1550
1780
1780
2290
2290
2699
2699
G gear
High
Low
12.5
2
P7/T7 motor
P7/T7 motor
P8/T8 motor
M1
mm
462
562
682
832
1022
1272
1622
1922
P7
576
105
M3
mm
730
730
560
560
640
640
810
810
P8
711
106
T6
536
65
H gear
High
Low
16
T8 motor
T8 motor
T9 motor
H1
mm
670
670
620
620
700
700
660
660
T7
536
71
J gear
High
Low
20
T9 motor
T9 motor
TA motor
H2
mm
139
188
251
322
421
546
721
868
T8
536
81
Weight
kg
1200
1300
1300
1400
1500
1600
1900
2000
T9
536
92
TA
576
106
Trolley dimensions
C
D1 (∅
∅)
754
E1
405
L4
707
18
E2
600
L5
766
E3
126
L8
20
E4
600
L9
60
E5
315
L11
320
E7
435
L12
52
E9
400
M5
44
H3
104.5
M6
218
H4
121.5
H5
832.5
H6
551.5
L1
1384
D006936_A
102573
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
227 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NE, REEVING: 02
English
30/12/2011
228 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
107 FIXED HOIST NE, REEVING: 04
Hoisting speed (m/min)
Load
kg
12500
16000
20000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
m
7.5
10.5
14
18
23.5
30.5
40
48.5
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
E gear
High
Low
4
0.7
P6/T6 motor
P6/T6 motor
P6/T6 motor
Length
code
C
D
E
F
G
H
J
K
P6
536
85
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
R
mm
1550
1550
1780
1780
2290
2290
2699
2699
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
M1
mm
462
562
682
832
1022
1272
1622
1922
P7
576
105
M3
mm
730
730
560
560
640
640
810
810
P8
711
106
T6
536
65
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
H1
mm
670
670
620
620
700
700
660
660
T7
536
71
J gear
High
Low
10
T9 motor
T9 motor
TA motor
H2
mm
69
94
125
161
210
273
360
434
T8
536
81
Weight
kg
1300
1300
1400
1400
1600
1700
1900
2100
T9
536
92
TA
576
106
Trolley dimensions
C
D1 (∅
∅)
754
E1
405
L4
707
18
E2
600
L5
766
E3
126
L8
20
E4
600
L9
60
E5
315
L11
320
E7
435
L12
52
E9
400
M5
44
H3
104.5
M6
218
H4
121.5
H5
832.5
H6
551.5
L1
1384
D006937_A
102574
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
229 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NE, REEVING: 04
English
30/12/2011
230 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
108 FIXED HOIST NE, REEVING: 06
Hoisting speed (m/min)
Load
kg
20000
25000
30000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
m
5
7
9
12
15.5
20
26.5
32
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
E gear
High
Low
2.5
0.4
P6/T6 motor
P6/T6 motor
P6/T6 motor
Length
code
C
D
E
F
G
H
J
K
P6
536
85
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
R
mm
1550
1550
1780
1780
2290
2290
2699
2699
G gear
High
Low
4
0.7
P7/T7 motor
P7/T7 motor
P8/T8 motor
M1
mm
462
562
682
832
1022
1272
1622
1922
P7
576
105
M3
mm
730
730
560
560
640
640
810
810
P8
711
106
T6
536
65
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
H1
mm
670
670
620
620
700
700
660
660
T7
536
71
J gear
High
Low
6.3
T9 motor
T9 motor
TA motor
H2
mm
46
63
84
107
140
182
240
289
T8
536
81
Weight
kg
1300
1400
1500
1500
1600
1800
2000
2100
T9
536
92
TA
576
106
Trolley dimensions
C
D1 (∅
∅)
873
E1
405
L4
707
18
E2
600
L5
766
E3
126
L8
20
E4
600
L9
60
E5
315
L11
320
E7
435
L12
52
E9
400
M5
44
H3
104.5
M6
218
H4
121.5
H5
832.5
H6
551.5
L1
1384
D006938_A
102575
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
231 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NE, REEVING: 06
English
30/12/2011
232 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
109 FIXED HOIST NE, REEVING: 08
Hoisting speed (m/min)
Load
kg
32000
40000
Class
Fem/ISO
2m/M5
1Am/M4
Hoist dimensions
HOL
m
7
9
11.5
15
20
24
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
E gear
High
Low
2
0.3
P6/T6 motor
P6/T6 motor
Length
code
E
F
G
H
J
K
P6
536
85
F gear
High
Low
2.5
0.4
P7/T7 motor
P7/T7 motor
R
mm
1780
1780
2290
2290
2699
2699
G gear
High
Low
3.2
0.5
P8/T8 motor
M1
mm
682
832
1022
1272
1622
1922
P7
576
105
G gear
High
Low
3.2
T8 motor
-
M3
mm
560
560
640
640
810
810
P8
711
106
T6
536
65
H gear
High
Low
4
T9 motor
T9 motor
H1
mm
620
620
700
700
660
660
T7
536
71
H gear
High
Low
5
TA motor
TA motor
H2
mm
63
81
105
137
180
217
T8
536
81
Weight
kg
1500
1600
1700
1800
2100
2200
T9
536
92
TA
576
106
Trolley dimensions
C
D1 (∅
∅)
1096
E1
405
L4
707
18
E2
600
L5
766
E3
126
L8
20
E4
600
L9
60
E5
315
L11
320
E7
435
L12
52
E9
400
M5
44
H3
104.5
M6
218
H4
121.5
H5
832.5
H6
551.5
L1
1384
D006939_A
102576
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
233 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NE, REEVING: 08
English
30/12/2011
234 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
110 FIXED HOIST NE, REEVING: 22
Hoisting speed (m/min)
Load
kg
6300
8000
10000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
E gear
High
Low
8
1.3
P6/T6 motor
P6/T6 motor
P6/T6 motor
Hoist dimensions
HOL
Length
m
code
16.5
E
22
F
29.5
G
39
H
52
J
63.5
K
77
L
86.5
M
98
N
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
H1
mm
770
770
770
1070
1070
1095
1095
1370
1370
P6
536
85
P7
576
105
F gear
High
Low
10
1.7
P6/T6 motor
P6/T6 motor
P7/T7 motor
M1
mm
682
832
1022
1272
1622
1922
2272
2522
2822
P8
711
106
G gear
High
Low
12.5
2
P7/T7 motor
P7/T7 motor
P8/T8 motor
M3
mm
429
354
259
434
259
134
-40
109
-40
T6
536
65
H gear
High
Low
16
T8 motor
T8 motor
T9 motor
J gear
High
Low
20
T9 motor
T9 motor
TA motor
Weight
kg
1200
1300
1300
1500
1600
1800
2000
2200
2300
T7
536
71
T8
536
81
T9
536
92
TA
576
106
Trolley dimensions
C
D1 (∅
∅)
731
E1
410
L4
707
18
E2
600
L5
766
E3
126
L8
20
E4
600
L9
60
E5
315
L11
260
E7
435
L12
52
E9
400
M5
44
H3
81.5
M6
218
H4
100.5
H5
810
H6
570
L1
1380
D006940_A
102577
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
235 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NE, REEVING: 22
English
30/12/2011
236 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
111 FIXED HOIST NE, REEVING: 24
Hoisting speed (m/min)
Load
kg
12500
16000
20000
E gear
High
Low
4
0.7
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
Length
m
code
8
E
11
F
14.5
G
19.5
H
26
J
31.5
K
38.5
L
43
M
49
N
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
H1
mm
770
770
770
1070
1070
1095
1095
1370
1370
P7
576
105
M1
mm
682
832
1022
1272
1622
1922
2272
2522
2822
P8
711
106
G gear
High
Low
6.3
1.1
P7/T7 motor
P7/T7 motor
P8/T8 motor
M3
mm
429
354
259
434
259
134
-40
109
-40
T6
536
65
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
J gear
High
Low
10
T9 motor
T9 motor
TA motor
Weight
kg
1300
1300
1400
1600
1700
1900
2000
2200
2400
T7
536
71
T8
536
81
T9
536
92
TA
576
106
H4
100.5
H5
810
Trolley dimensions
C
D1 (∅
∅)
1040
E1
410
L4
707
18
E2
600
L5
766
E3
126
L8
20
E4
600
L9
60
E5
315
L11
260
E7
435
L12
52
E9
400
M5
44
H3
81.5
M6
218
H6
570
L1
1380
D006941_A
102578
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
237 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NE, REEVING: 24
English
30/12/2011
238 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
112 FIXED HOIST NE, REEVING: 26
Hoisting speed (m/min)
Load
kg
20000
25000
30000
E gear
High
Low
2.5
0.4
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
Length
m
code
5.5
E
7
F
9.5
G
13
H
17
J
21
K
25.5
L
28.5
M
32.5
N
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
H1
mm
770
770
770
1070
1070
1095
1095
1370
1370
P7
576
105
M1
mm
682
832
1022
1272
1622
1922
2272
2522
2822
P8
711
106
G gear
High
Low
4
0.7
P7/T7 motor
P7/T7 motor
P8/T8 motor
M3
mm
429
354
259
434
259
134
-40
109
-40
T6
536
65
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
J gear
High
Low
6.3
T9 motor
T9 motor
TA motor
Weight
kg
1400
1400
1500
1700
1800
1900
2100
2300
2400
T7
536
71
T8
536
81
T9
536
92
TA
576
106
H4
100.5
H5
810
Trolley dimensions
C
D1 (∅
∅)
1079
E1
410
L4
707
18
E2
600
L5
766
E3
126
L8
20
E4
600
L9
60
E5
315
L11
260
E7
435
L12
52
E9
400
M5
44
H3
81.5
M6
218
H6
570
L1
1380
D006942_A
102579
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
239 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NE, REEVING: 26
English
30/12/2011
240 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
113 FIXED HOIST NE, REEVING: 28
Hoisting speed (m/min)
Load
kg
32000
40000
Class
Fem/ISO
2m/M5
1Am/M4
E gear
High
Low
2
0.3
P6/T6 motor
P6/T6 motor
Hoist dimensions
HOL
Length
m
code
5.5
F
7
G
9.5
H
13
J
15.5
K
19
L
21.5
M
24.5
N
Motor dimensions
Motor
P6
M2 (mm)
536
Weight ( kg)
85
F gear
High
Low
2.5
0.4
P7/T7 motor
P7/T7 motor
H1
mm
770
770
1070
1070
1095
1095
1370
1370
P7
576
105
G gear
High
Low
3.2
0.5
P8/T8 motor
M1
mm
832
1022
1272
1622
1922
2272
2522
2822
P8
711
106
M3
mm
354
259
434
259
134
-40
109
-40
T6
536
65
G gear
High
Low
3.2
T8 motor
-
H gear
High
Low
4
T9 motor
T9 motor
H gear
High
Low
5
TA motor
TA motor
Weight
kg
1500
1600
1800
1900
2100
2200
2400
2600
T7
536
71
T8
536
81
T9
536
92
TA
576
106
H4
100.5
H5
810
Trolley dimensions
C
D1 (∅
∅)
1206
E1
410
L4
707
18
E2
600
L5
766
E3
126
L8
20
E4
600
L9
60
E5
315
L11
260
E7
435
L12
52
E9
400
M5
44
H3
81.5
M6
218
H6
570
L1
1380
D006943_A
102580
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: X points the location for an auxiliary electrical cubicle.
English
30/12/2011
241 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NE, REEVING: 28
English
30/12/2011
242 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
114 FIXED HOIST NF, REEVING: 22
Hoisting speed (m/min)
Load
kg
12500
16000
20000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
E gear
High
Low
8
1.2
P6/T6 motor
P6/T6 motor
P6/T6 motor
Hoist dimensions
HOL
m
15.5
20.5
27.5
37.5
46
55.5
62.5
71
Length
code
F
G
H
J
K
L
M
N
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
F gear
High
Low
10
1.6
P6/T6 motor
P6/T6 motor
P7/T7 motor
R
mm
1700
1700
2400
2400
3100
3100
3800
3800
G gear
High
Low
12.5
P7/T7 motor
P7/T7 motor
T8 motor
M1
mm
832
1022
1272
1622
1922
2272
2522
2822
P7
576
105
M3
mm
434
339
565
389
339
414
840
690
T6
536
65
T7
536
71
H gear
High
Low
16
T8 motor
T8 motor
T9 motor
J gear
High
Low
20
T9 motor
T9 motor
-
Weight
kg
1400
1500
1600
1800
2000
2200
2400
2600
T8
536
81
T9
536
92
Trolley dimensions
C
D1 (∅
∅)
918
E1
488
L1
1773
18
E2
600
L2
92
E3
122
L4
707
E4
600
L5
731.5
E5
305
L8
57
E6
81
L9
70
E9
400
L10
35
E10
586
L11
540
H3
255
L12
272
H4
355
M5
44
H5
833
M6
218
H6
940.5
D006944_A
102581
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: The larger electrical cubicle is required with motor P7.
English
30/12/2011
243 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NF, REEVING: 22
English
30/12/2011
244 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
115 FIXED HOIST NF, REEVING: 24
Hoisting speed (m/min)
Load
kg
25000
32000
40000
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
E gear
High
Low
4
0.6
P6/T6 motor
P6/T6 motor
P6/T6 motor
Hoist dimensions
HOL
m
7.5
10
13.5
18.5
23
27.5
31
35.5
Length
code
F
G
H
J
K
L
M
N
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
F gear
High
Low
5
0.8
P6/T6 motor
P6/T6 motor
P7/T7 motor
R
mm
1700
1700
2400
2400
3100
3100
3800
3800
P7
576
105
G gear
High
Low
6.3
1
P7/T7 motor
P7/T7 motor
T8 motor
M1
mm
832
1022
1272
1622
1922
2272
2522
2822
M3
mm
434
339
565
389
339
414
840
690
T6
536
65
T7
536
71
H gear
High
Low
8
T8 motor
T8 motor
T9 motor
J gear
High
Low
10
T9 motor
T9 motor
-
Weight
kg
1500
1500
1700
1800
2100
2200
2500
2600
T8
536
81
T9
536
92
Trolley dimensions
C
D1(∅
∅)
1263
E1
488
L1
1773
18
E2
600
L2
92
E3
122
L4
707
E4
600
L5
731.5
E5
305
L8
57
E6
81
L9
70
E9
400
L10
35
E10
586
L11
540
H3
255
L12
272
H4
355
M5
44
H5
833
M6
218
H6
940.5
D006945_A
102582
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: The larger electrical cubicle is required with motor P7.
English
30/12/2011
245 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NF, REEVING: 24
English
30/12/2011
246 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
116 FIXED HOIST NF, REEVING: 26
Hoisting speed (m/min)
Load
kg
40000
50000
60000
E gear
High
Low
2.5
0.4
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
m
5
6.5
9
12.5
15
18.5
20.5
23.5
Length
code
F
G
H
J
K
L
M
N
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
F gear
High
Low
3.2
0.5
P6/T6 motor
P6/T6 motor
P7/T7 motor
R
mm
1700
1700
2400
2400
3100
3100
3800
3800
P7
576
105
G gear
High
Low
4
0.6
P7/T7 motor
P7/T7 motor
T8 motor
M1
mm
832
1022
1272
1622
1922
2272
2522
2822
M3
mm
434
339
565
389
339
414
840
690
T6
536
65
T7
536
71
H gear
High
Low
5
T8 motor
T8 motor
T9 motor
J gear
High
Low
6.3
T9 motor
T9 motor
-
Weight
kg
1600
1700
1900
2000
2400
2600
3000
3100
T8
536
81
T9
536
92
Trolley dimensions
C
D1 (∅
∅)
1339
E1
488
L1
1773
18
E2
600
L2
92
E3
122
L4
707
E4
600
L5
732
E5
305
L8
57
E6
81
L9
70
E9
400
L10
35
E10
586
L11
540
H3
255
L12
330
H4
355
M5
44
H5
833
M6
218
H6
940.5
D006946_A
102583
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: The larger electrical cubicle is required with motor P7.
English
30/12/2011
247 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NF, REEVING: 26
English
30/12/2011
248 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
117 FIXED HOIST NF, REEVING: 28
Hoisting speed (m/min)
Load
kg
63000
80000
E gear
High
Low
2
0.3
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
2m/M5
1Am/M4
Hoist dimensions
HOL
m
6.5
9
11
13.5
15.5
17.5
Length
code
H
J
K
L
M
N
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
P6
536
85
F gear
High
Low
2.5
0.4
P6/T6 motor
P7/T7 motor
R
mm
2400
2400
3100
3100
3800
3800
G gear
High
Low
3.2
0.5
P7/T7 motor
T8 motor
M1
mm
1272
1622
1922
2272
2522
2822
P7
576
105
M3
mm
565
389
339
414
840
690
T6
536
65
T7
536
71
H gear
High
Low
4
T8 motor
T9 motor
J gear
High
Low
5
T9 motor
-
Weight
kg
2000
2200
2600
2700
3100
3200
T8
536
81
T9
536
92
Trolley dimensions
C
D1 (∅
∅)
1430
E1
488
L1
1773
18
E2
600
L2
92
E3
122
L4
707
E4
600
L5
732
E5
305
L8
57
E6
81
L9
70
E9
400
L10
35
E10
586
L11
540
H3
255
L12
330
H4
355
M5
44
H5
833
M6
218
H6
940.5
D006947_A
102584
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: The larger electrical cubicle is required with motor P7.
English
30/12/2011
249 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist NF, REEVING: 28
English
30/12/2011
250 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
SPECIAL LOW HEADROOM HOIST
English
30/12/2011
251 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
English
30/12/2011
252 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
118 SPECIAL LOW HEADROOM HOIST NB, REEVING: 04
Hoisting speed (m/min)
Load
Class
kg
2800
JIS C
3200
ISO M5
G gear + O2 motor
Single speed
6.3
6.3
Hoist dimensions
HOL
Length
m
code
6
A
9
C
Trolley dimensions
Min B
Max B
75
L1
436.5
L13
18
300
L2
426
L14
442
M2
mm
318
448
C
608
L3
155
L15
25
D1 (∅
∅)
80
L4
142.6
L16
520
G gear + P2 motor
High
Low
6.3
1.1
6.3
1.1
M1
mm
284
414
D2 (∅
∅)
40
L5
115.4
L17
569
L17
mm
569
679
L6
142
Weight
kg
240
260
L7
99.5
L8
142.5
L9
128.7
L10
76
L11
11.5
L12
114
D004646_A
062492
Note: All dimensions in mm.
English
30/12/2011
253 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Special Low Headroom Hoist NB, REEVING: 04
Note 1: Adjust the position of the hoisting upper limit lever so that the end of it is in the middle of track beam. Tolerance ±12mm.
Note 2: Location of 1-speed or inverter travelling motor connection box.
Note 3: Location of 2-speed travelling motor connection box.
Note 4: Location of M8 threaded holes for towing arm and for travelling limit switch. Spacing 76mm x 76mm.
Note 5: Buffer position for brand M.
Note 6: Buffer position for other brands.
English
30/12/2011
254 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
MACHINERY HOIST
English
30/12/2011
255 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
English
30/12/2011
256 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
119 MACHINERY HOIST NBM1V, REEVING: M1
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
400
3m/M6
500
2m/M5
600
3m/M6
800
2m/M5
F gear + P1/T1 motor
High
Low
20
3.3
20
3.3
-
Hoist dimensions
HOL
Length
m
code
24
A
38
C
Motor dimensions
Motor
P1
M2 (mm)
498
Weight ( kg)
21
M1
mm
431
561
P2
558
31
F gear + P2/T2 motor
High
Low
20
3.3
20
3.3
20
3.3
20
3.3
H1
mm
182
288
P3
588
35
T1
mm
270
400
T1
498
22
G gear + P2/T2 motor
High
Low
25
4.2
25
4.2
25
4.2
25
4.2
T3
mm
318
448
T2
498
22
H gear + P3/T3 motor
High
Low
32
5.3
32
5.3
32
5.3
32
5.3
Weight
kg
95
105
T3
498
22
Trolley dimensions
D1 (∅
∅)
303
D2 (∅
∅)
6.4
D3 (∅
∅)
14
L1
L2
L3
L4
L5
L6
L7
L8
L9
380
249
386
24
28
40
300
291
631
D002083_A
062495
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
Note: Max rope angle from drum groove +/- 4 degrees.
English
30/12/2011
257 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NBM1V, REEVING: M1
English
30/12/2011
258 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
120 MACHINERY HOIST NBM2V, REEVING: M2, ROPES TO SAME
DIRECTION
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
400
3m/M6
500
2m/M5
600
3m/M6
800
2m/M5
F gear + P1/T1 motor
High
Low
20
3.3
20
3.3
-
Hoist dimensions
HOL
Length
m
code
7
A
15
C
Motor dimensions
Motor
P1
M2 (mm)
498
Weight ( kg)
21
M1
mm
431
561
P2
558
31
F gear + P2/T2 motor
High
Low
20
3.3
20
3.3
20
3.3
20
3.3
H1
mm
53
118
P3
588
35
T1
mm
270
400
T1
498
22
G gear + P2/T2 motor
High
Low
25
4.2
25
4.2
25
4.2
25
4.2
T3
mm
318
448
T2
498
22
H gear + P3/T3 motor
High
Low
32
5.3
32
5.3
32
5.3
32
5.3
Weight
kg
95
105
T3
498
22
Trolley dimensions
D1 (∅
∅)
303
L1
629
D2 (∅
∅)
6.7
L2
380
D3 (∅
∅)
14
L3
249
L4
386
L5
24
L6
74
L7
28
L8
40
L9
300
L10
291
D002085_A
062496
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
Note: Rope 1 closer to the gearbox.
Note: max rope angle from drum groove +/- 4 degrees.
English
30/12/2011
259 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NBM2V, REEVING: M2 , Ropes To Same Direction
Note 1: Electric cubicle optional position and transport position.
English
30/12/2011
260 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
121 MACHINERY HOIST NBM2V, REEVING: M2, ROPES TO OPPOSITE
DIRECTIONS
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
400
3m/M6
500
2m/M5
600
3m/M6
800
2m/M5
F gear + P1/T1 motor
High
Low
20
3.3
20
3.3
-
Hoist dimensions
HOL
Length
m
code
7
A
15
C
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
M1
mm
431
561
P1
498
21
H1
mm
53
118
P2
558
31
F gear + P2/T2 motor
High
Low
20
3.3
20
3.3
20
3.3
20
3.3
T1
mm
270
400
P3
588
35
G gear + P2/T2 motor
High
Low
25
4.2
25
4.2
25
4.2
25
4.2
T3
mm
318
448
T1
498
22
H gear + P3/T3 motor
High
Low
32
5.3
32
5.3
32
5.3
32
5.3
Weight
kg
95
105
T2
498
22
T3
498
22
Trolley dimensions
D1 (∅
∅)
303
L1
629
D2 (∅
∅)
6.4
L2
380
D3 (∅
∅)
14
L3
249
L4
380
L5
386
L6
40
L7
300
L8
24
L9
74
L10
28
L11
307
D002084_A
062561
Note: All dimensions in mm.
Note: Weight calculated with P1 motor.
Note: Both ropes within the allowed rope angle!
Note: Max rope angle from drum groove +/- 4 degrees.
English
30/12/2011
261 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NBM2V, REEVING: M2, Ropes To Opposite Directions
Note 1: Electric cubicle optional position and transport position.
English
30/12/2011
262 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
122 MACHINERY HOIST NCM1V, REEVING: M1
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
1000
3m/M6
1250
2m/M5
1600
1Am/M4
Hoist dimensions
HOL
Length
m
code
24
B
36
C
48
D
62
E
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
E gear + P3/T3 motor
High
Low
16
2.7
16
2.7
16
2.7
M1
mm
467
567
667
787
P3
597
35
H1
mm
196
292
392
506
P4
690
53
T3
507
22
F gear + P3/T3 motor
High
Low
20
3.3
20
3.3
-
T1
mm
300
400
500
620
T3
mm
350
450
550
670
H gear + P4/T4 motor
High
Low
32
5.3
32
5.3
-
Weight
kg
140
150
160
170
T4
610
45
Trolley dimensions
D1 (∅
∅)
355
L1
435
D2 (∅
∅)
8
L2
251
D3 (∅
∅)
18
L3
456
L4
40
L5
25
L6
42.5
L7
350
L8
294
L9
686
D002108_A
062500
Note: All dimensions in mm.
Note: Weight calculated with P3 motor.
Note: Max rope angle from drum groove +/- 4 degrees.
English
30/12/2011
263 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NCM1V, REEVING: M1
English
30/12/2011
264 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
123 MACHINERY HOIST NCM2V, REEVING: M2, ROPES TO SAME
DIRECTION
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
1000
3m/M6
1250
2m/M5
1600
1Am/M4
Hoist dimensions
HOL
Length
m
code
9.5
B
17
C
25
D
34
E
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
E gear + P3/T3 motor
High
Low
16
2.7
16
2.7
16
2.7
M1
mm
467
567
667
787
P3
597
35
H1
mm
62
112
162
222
P4
690
53
T3
507
22
F gear + P3/T3 motor
High
Low
20
3.3
20
3.3
-
T1
mm
300
400
500
620
T3
mm
350
450
550
670
H gear + P4/T4 motor
High
Low
32
5.3
32
5.3
-
Weight
kg
140
150
160
170
T4
610
45
Trolley dimensions
D1 (∅
∅)
355
L1
707
D2 (∅
∅)
6.4
L2
435
D3 (∅
∅)
18
L3
251
L4
456
L5
40
L6
80
L7
25
L8
42.5
L9
350
L10
294
D002110_A
062505
Note: All dimensions in mm.
Note: Weight calculated with P3 motor.
Note: Max rope angle from drum groove +/- 4 degrees.
Note: Drum groove var. 4.
English
30/12/2011
265 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NCM2V, REEVING: M2, Ropes To Same Direction
English
30/12/2011
266 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
124 MACHINERY HOIST NCM2V, REEVING: M2, ROPES TO OPPOSITE
DIRECTIONS
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
1000
3m/M6
1250
2m/M5
1600
1Am/M4
E gear + P3/T3 motor
High
Low
16
2.7
16
2.7
16
2.7
Hoist dimensions
HOL
Length
m
code
9.5
B
17
C
25
D
34
E
M1
mm
467
567
667
787
Motor dimensions
Motor
P3
M2 (mm)
597
Weight ( kg)
35
P4
690
53
H1
mm
62
112
162
222
T3
507
22
F gear + P3/T3 motor
High
Low
20
3.3
20
3.3
-
T1
mm
300
400
500
620
T3
mm
350
450
550
670
H gear + P4/T4 motor
High
Low
32
5.3
32
5.3
-
Weight
kg
140
150
160
170
T4
610
45
Trolley dimensions
D1 (∅
∅)
355
L1
705
D2 (∅
∅)
6.4
L2
435
D3 (∅
∅)
18
L3
251
L4
456
L5
25
L6
42.5
L7
350
L8
80
L9
40
L10
308
D002109_A
062501
Note: All dimensions in mm.
Note: Weight calculated with P3 motor.
Note: Max rope angle from drum groove +/- 4 degrees.
Note: Rope 1 closer to the gearbox.
English
30/12/2011
267 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NCM2V, REEVING: M2, Ropes To Opposite Directions
English
30/12/2011
268 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
125 MACHINERY HOIST NDM1V, REEVING: M1
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
2000
3m/M6
2500
2m/M5
3150
1Am/M4
E gear + P5/T5 motor
High
Low
16
2.7
16
2.7
16
2.7
Hoist dimensions
HOL
Length
m
code
36
D
48
E
64
F
82
G
Motor dimensions
Motor
M1 (mm)
Weight ( kg)
M2
mm
697
817
967
1157
P5
722
58
F gear + P5/T5 motor
High
Low
20
3.3
20
3.3
-
H1
mm
352
472
622
812
P6
722
85
T1
mm
490
610
760
950
P7
762
105
H gear + P6/T6 motor
High
Low
32
5.3
32
5.3
-
T3
mm
552
672
822
1012
T5
642
45
J gear + P7/T7 motor
High
Low
40
6.7
40
6.7
-
Weight
kg
315
330
350
370
T6
722
65
T7
722
71
Trolley dimensions
D1 (∅
∅)
406
D2 (∅
∅)
11
D3 (∅
∅)
22
L1
L2
L3
L4
L5
L6
L7
L8
L9
847
541
400
515
177
54
57.5
400
388
D002138_A
062940
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Max rope angle from drum groove +/- 4 degrees.
English
30/12/2011
269 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NDM1V, REEVING: M1
English
30/12/2011
270 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
126 MACHINERY HOIST NDM2V, REEVING: M2, ROPES TO SAME
DIRECTION
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
2000
3m/M6
2500
2m/M5
3150
1Am/M4
E gear + P5/T5 motor
High
Low
16
2.7
16
2.7
16
2.7
Hoist dimensions
HOL
Length
m
code
18
D
27
E
38
F
50
G
Motor dimensions
Motor
M1 (mm)
Weight ( kg)
M2
mm
698
818
968
1158
P5
728
58
F gear + P5/T5 motor
High
Low
20
3.3
20
3.3
-
H1
mm
128
188
263
358
P6
722
85
T1
mm
490
610
760
950
P7
762
105
H gear + P6/T6 motor
High
Low
32
5.3
32
5.3
-
T3
mm
552
672
822
1012
T5
728
45
J gear + P7/T7 motor
High
Low
40
6.7
40
6.7
-
Weight
kg
315
330
350
370
T6
722
65
T7
722
71
Trolley dimensions
D1 (∅
∅)
406
L1
515
D2 (∅
∅)
22
L2
332
D3 (∅
∅)
8
L3
541
L4
99
L5
31
L6
57.5
L7
400
L8
388
L9
530
L10
177
D002137_A
062942
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Max rope angle from drum groove +/- 4 degrees.
English
30/12/2011
271 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NDM2V, REEVING: M2, Ropes To Same Direction
English
30/12/2011
272 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
127 MACHINERY HOIST NDM2V, REEVING: M2, ROPES TO OPPOSITE
DIRECTIONS
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
2000
3m/M6
2500
2m/M5
3150
1Am/M4
E gear + P5/T5 motor
High
Low
16
2.7
16
2.7
16
2.7
Hoist dimensions
HOL
Length
m
code
18
D
27
E
38
F
50
G
Motor dimensions
Motor
M1 (mm)
Weight ( kg)
M2
mm
698
818
968
1158
P5
722
58
F gear + P5/T5 motor
High
Low
20
3.3
20
3.3
-
H1
mm
128
188
263
358
P6
722
85
T1
mm
490
610
760
950
P7
762
105
H gear + P6/T6 motor
High
Low
32
5.3
32
5.3
-
T3
mm
552
672
822
1012
T5
642
45
J gear + P7/T7 motor
High
Low
40
6.7
40
6.7
-
Weight
kg
315
330
350
370
T6
722
65
T7
722
71
Trolley dimensions
D1 (∅
∅)
406
L1
515
D2 (∅
∅)
22
L2
332
D3 (∅
∅)
8
L3
541
L4
31
L5
57.5
L6
400
L7
388
L8
99
L9
65
L10
530
L11
177
D002139_A
062943
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Rope 1 closer to the gearbox.
Note: Max rope angle from drum groove +/- 4 degrees.
English
30/12/2011
273 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NDM2V, REEVING: M2, Ropes To Opposite Directions
English
30/12/2011
274 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
128 MACHINERY HOIST NEM1V, REEVING: M1
Hoisting speed (m/min)
Load
kg
3200
4000
5000
E gear
High
Low
16
2.7
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
m
32
43
56.5
73
94.5
122.5
161.5
195
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Length
code
C
D
E
F
G
H
J
K
P6
536
85
F gear
High
Low
20
3.3
P6/T6 motor
P6/T6 motor
P7/T7 motor
H2
mm
286
385
506
654
846
1097
1446
1746
P7
576
105
G gear
High
Low
25
4.2
P7/T7 motor
P7/T7 motor
P8/T8 motor
T1
mm
400
500
620
770
960
1210
1560
1860
P8
711
106
T6
536
65
H gear
High
Low
32
T8 motor
T8 motor
T9 motor
T3
mm
466
566
686
836
1026
1276
1626
1926
T7
536
71
T8
536
81
J gear
High
Low
40
T9 motor
T9 motor
TA motor
Weight
kg
600
630
660
700
740
810
900
980
T9
536
92
TA
576
106
L9
70
L10
800
Trolley dimensions
D1 (∅
∅)
608
L1
1034
D2 (∅
∅)
21
L2
800
L3
600
L4
60
L5
60
L6
60
L7
60
L8
660
L11
218
L12
33
D002433_A
063844
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Max rope angle from drum groove +/- 4 degrees.
English
30/12/2011
275 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NEM1V, REEVING: M1
English
30/12/2011
276 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
129 MACHINERY HOIST NEM2V, REEVING: M2
Hoisting speed (m/min)
Load
kg
3200
4000
5000
E gear
High
Low
16
2.7
P6/T6 motor
P6/T6 motor
P6/T6 motor
Class
Fem/ISO
3m/M6
2m/M5
1Am/M4
Hoist dimensions
HOL
m
37
48.5
63
82
108.5
131.5
158.5
177.5
200.5
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Length
code
E
F
G
H
J
K
L
M
N
P6
536
85
F gear
High
Low
20
3.3
P6/T6 motor
P6/T6 motor
P7/T7 motor
H2
mm
242
317
412
537
710
861
1037
1162
1312
P7
576
105
G gear
High
Low
25
4.2
P7/T7 motor
P7/T7 motor
P8/T8 motor
T1
mm
620
770
960
1210
1560
1860
2210
2460
2760
P8
711
106
T6
536
65
H gear
High
Low
32
T8 motor
T8 motor
T9 motor
T3
mm
686
836
1026
1276
1626
1926
2276
2526
2826
T7
536
71
T8
536
81
J gear
High
Low
40
T9 motor
T9 motor
TA motor
Weight
kg
660
700
740
810
900
980
1070
1140
1220
T9
536
92
TA
576
106
Trolley dimensions
D1 (∅
∅)
608
L1
1034
L13
33
D2 (∅
∅)
11
L2
800
D3 (∅
∅)
21
L3
600
L4
60
L5
60
L6
60
L7
60
L8
70
L9
660
L10
800
L11
218
L12
30
D002411_A
063845
Note: Weight calculated with P6 motor.
Note: All dimensions in mm.
Note: Angle of rope 2 can variate 0-360 degrees.
Note: Max rope angle from drum groove +/- 4 degrees.
English
30/12/2011
277 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Machinery Hoist NEM2V, REEVING: M2
English
30/12/2011
278 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
130 HOOK
130.1 Hook block dimensions
c_hbdim1b
Hoist
frame
Rope
falls
Z
02
M5
RSN1 V
1
385
84
261
168
108
9.3
Z
04
M5
RSN1.6 V
3
391
84
258
168
202
16.2
B
02
M5
M6
RSN 1 V
1
385
84
261
168
108
9.3
B
04
M5
M6
HBC 1.6 V
2
337
84
198
168
221
13
C
02
M5
M6
RSN 1 V
1
425
102
282
204
118
14
C
04
M5
M6
HBC 2.5 V
2
426
102
259
204
270
22
C
04
HBC 2.5 V
3
443
102
276
204
241
31.5
C
06
HBC 2.5 V
4
499
110
324
220
165
37
C
08
M4
M5
HBC 2.5 V
4
499
110
324
220
165
40
D
02
X (M4)
M5
M6
HBC 2.5 V
1
578
142
371
283
148
31
D
04
M5
M6
HBC 5 V
2
548
142
316
283
376
46.5
D
04
HBC 5 V
3
604
142
372
283
341
77.5
D
06
M5
M6
HBC 5 V
4
687
150
447
300
220
88
D
08
HBC 5 V
4
687
150
447
300
220
95
D
22
M5
M6
HBC 2.5 V
4
499
110
324
220
165
29
D
24
M5
M6
HBC 5 V
5
608
110
408
220
220
67
D
26
M5
M6
RSN 6 V
5
644
110
448
220
286
80
D
28
M4
M5
RSN 6 V
5
644
110
448
220
344
88
E
02
M4
M5
M6
HBC 5 V
9
830
205
535
410
244
98
E
04
M4
M5
M6
HBC 5 V
9
830
205
535
410
244
111
English
1Am/M4
X (M4)
Hoist duty
2m/M5
3m/M6
X (M4)
M5
M6
X (M4)
M4
M5
Hook
forging
Fig.
H
30/12/2011
Hook block dimensions (mm)
H1
H2
D
B
Weight
(kg)
279 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Hoist
frame
Rope
falls
1Am/M4
Hoist duty
2m/M5
3m/M6
E
06
M4
M5
E
08
M4
M5
E
22
M4
M5
E
24
M4
E
26
E
28
F
F
M6
Hook
forging
Fig.
H
Hook block dimensions (mm)
H1
H2
D
B
Weight
(kg)
RSN10 T
8
965
205
655
410
282
181
RSN 16 T
8
1119
205
780
410
294
236
M6
HBC 5 V
9
740
155
495
310
243
78
M5
M6
RSN 6 V
7
719
160
473
700
275
143
M4
M5
M6
M4
M5
22
M4
M5
M6
RSN 6 V
24
M4
M5
M6
RSN 16 T
F
26
M4
M5
M6
RSN 20 T
F
28
M4
M5
RSN 25 T
RSN10 T
7
830
160
564
700
282
192
RSN 16 T
7
974
160
680
700
294
299
8
844
205
553
410
244
114
7
1034
200
700
910
377
332
7
1118
200
766
910
377
495
7
1219
200
847
910
377
603
B
Weight
(kg)
86
130.2 New hook blocks to be released in 2012
Please check availability from factory.
Hoist
frame
Rope
falls
D
06
D
08
D
22
M5
D
24
D
26
D
28
English
1Am/M4
Hoist duty
2m/M5
3m/M6
Hook
forging
Fig.
HBC 5 V
1
740
155
495
310
243
HBC 5 V
1
740
155
495
310
243
91
M6
HBC 2.5 V
1
541
115
361
230
203
37
M5
M6
RSN 6 V
2
639
120
433
530
243
100
M5
M6
RSN 6 V
2
639
120
433
530
243
104
RSN 6 V
2
639
120
433
530
243
110
M5
M4
M4
M6
M5
M5
H
30/12/2011
Hook block dimensions (mm)
H1
H2
D
280 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
130.3 Hook forging dimensions
d1
d1
A
b4
f1
Ba
ll r
l1
l1
g1
a2
ll r2
b2
B
a3
a1
E
a3
e3
a2
g1
B
2
e3
Ba
b1
f1
C
D
h2
h2
b3
b2
h1
D
h3
b1
b3
a1
h4
E
c_hb1b
RSN
a1
a2
a3
b1
b2
b3
b4
d1
e3
f1
g1
h1
h2
h3
h4
l1
r2
weight
(forging)
kg
HBC
RSN 1
RSN 1.6 RSN 2.5
RSN 4
RSN
RSN 5
RSN 6
RSN 10
RSN 16
RSN 20
HBC
RSN 25 HBC 1.6 HBC 2.5
HBC 5
50 +
3
56 +
3
63 +
3
71
+
4
80
+ 4
90
+
5
112 +
6
140 +
6
160 +
8
180 +
8
56
+
3
63
+
3
80
+
3
40 +
3
45 +
3
50 +
3
56
+
4
63
+ 4
71
+
5
90
+
6
112 +
6
125 +
8
140 +
8
45
+
3
51
+
3
63
+
3
57 +
3
64 +
3
72 +
3
80
+
4
90
+ 4
101 +
5
127 +
6
160 +
6
180 +
8
202 +
8
60
+
3
65
+
3
84
+
3
38 +
3
45 +
3
53 +
3
63
+
4
71
+ 4
80
+
5
100 +
6
125 +
6
140 +
8
160 +
8
46
+
3
52
+
3
75
+
3
32 +
3
38 +
3
45 +
3
53
+
4
60
+ 4
67
+
5
85
6
106 +
6
118 +
8
132 +
8
40
+
3
44
+
3
64
+
3
+
+
+
+
+
+
+
+
+
+
+
32
+
3
37
+
3
59
+
3
+
+
+
+
+
+
+
+
+
+
32
+
3
37
+
3
45
+
2
30 +
3
36 +
3
42 +
3
48
+
4
53
105 +
3
118 +
3
132 +
3
148 +
4
31 +
1
35 +
1
40 +
1
45
+
12.5 +
1
14 +
1
16 +
1
16
48 +
3
56 +
3
67 +
3
40 +
3
48 +
3
58 +
3
+ 4
60
+
5
75
+
6
95
+
6
106 +
8
118 +
8
38
+
3
44
+
3
55
+
3
165 + 4
185 +
5
221 +
6
280 +
6
330 +
8
360 +
8
105 +
3
118 +
3
148 +
3
2
51
+ 2
57
+
2
46
+
3
58
+
3
68
+
3
74
+
3
40
+
1
45
+
2
56
+
2
+
2
18
+ 2
18
+
2
23
+
3
33
+
3
33
+
3
38
+
3
14
+
1
16
+
1
18
+
2
80
+
4
90
+ 4
100 +
5
125 +
6
160 +
6
180 +
8
200 +
8
67
+
4
75
+ 4
85
5
106 +
6
132 +
6
150 +
8
170 +
8
+
+
+
+
56
+
3
65
+
3
90
+
4
+
+
+
+
+
+
+
+
+
+
76
+
3
85
+
3
112 +
4
+
+
+
+
+
+
+
+
+
+
84
+
3
100 +
3
130 +
4
197 +
3
224 +
3
253 +
3
285 +
4
318 + 4
380 +
5
452 +
6
582 +
6
653 +
8
724 +
8
199 +
3
260 +
3
300 +
4
50 +
3
56 +
3
63 +
3
71
4
90
90
5
112 +
6
140 +
6
160 +
8
180 +
8
56
3
63
3
80
4
3.2
4.5
6.3
+
8.8
+ 4
12.3
+
17.1
34
66
95
136
+
5.1
+
8
+
15
Note: Safety latch on HBC forging decreases dimension a2 about 5 mm and about 15 mm on RSN forging.
Note: The ‘+ number’ after the nominal dimension indicates the tolerance. For example 160+6 means that the
actual dimension is between 160 - 166 mm.
Hook forging standard
Dimension standard
Material standard
English
RSN
DIN 15401
DIN 15400
30/12/2011
HBC
DIN 15401 when applicable
DIN 15400
281 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
B
131 DRUM AND ROPE SHEAVE DIAMETERS
D
Nominal diameter
C
A
Rope sheave
diameters
Rope diameter
Duty class
A
B
C
D
(nominal, mm)
(nominal, mm)
FEM / ISO
(mm)
(mm)
(mm)
(mm)
146
6.4
3m / ISO M6
22
/
22
3.3
18
40
180
8
3m / ISO M6
26
/
26
4.2
20
50
248
11
3m / ISO M6
32
/
38
5.8
23
65
288
11
4m / ISO M7
32
/
48
5.8
33
65
338
15
3m / ISO M6
40
/
46
8
28
85
15
4m / ISO M7
40
/
59
8
41
85
(1)
(1)
398
1)
Standard as center wheels on some true-vertical lift hooks.
Frame size
code
Z
B
C
D
D
E
E
F
English
Rope
diameter
(mm)
6.2
6.4
8
11
8
15
11
15
Reeving
Standard
Standard
Standard
Standard
True vertical
Standard
True vertical
True vertical
Rope drum
diameter
(nominal, (mm))
243
303
355
406
406
608
608
608
Rope drum pitch
(mm)
30/12/2011
7
7.2
9.1
12.5
9.1
17.1
12.5
17.1
Rope sheave
diameter
(nominal, mm)
146
146
180
248
180
338
248
and
288
338
and
398
Number of rope
clamps on drum
2
2
3
4
2x3
6
2x4
2x6
282 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
PRODUCTS TO BE PHASED OUT IN 2012
English
30/12/2011
283 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
English
30/12/2011
284 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
132 DOUBLE GIRDER HOIST ND, REEVING: 06
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
6
D
8
E
10
F
13
G
M1
mm
682
802
952
1142
Motor dimensions
Motor
P5
M3 (mm)
722
Weight ( kg)
58
P6
722
85
M2
mm
480
630
770
970
P7
762
105
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
H1
mm
657
807
952
1152
T5
642
45
H2
mm
53
78
98
132
T6
722
65
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
L7
mm
73
73
73
73
L7*
mm
93
93
93
93
Min R
mm
1400
1700
2000
2400
Weight
kg
775
820
855
885
T7
722
71
Trolley dimensions
C
699
L1
470
L14
715
D1 (∅
∅)
140
L2
382
L15
663
D2 (∅
∅)
170
L3
400
L16
163
D3 (∅
∅)
63
L4
18
L17
103
WB
1000
L5
100
L18
900
WW min
50
L6
230
L19
163
WW
max
85
L8
1326
L20
255
L9
510
L10
428
L11
100
L12
500
L13
500
D002124_A
005023
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
* Please, disregard the dimension L7*.
English
30/12/2011
285 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 06
English
30/12/2011
286 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
133 DOUBLE GIRDER HOIST ND, REEVING: 08
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
D
6
E
8
F
10
G
M1
mm
682
802
952
1142
Motor dimensions
Motor
P5
M3 (mm)
722
Weight ( kg)
58
P6
722
85
M2
mm
480
630
770
970
P7
762
105
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
H1
mm
668
818
948
1148
T5
642
45
H2
mm
44
53
76
98
T6
722
65
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
L7
mm
73
73
73
73
L7*
mm
93
93
93
93
Min R
mm
1400
1700
2000
2400
Weight
kg
780
825
860
890
T7
722
71
Trolley dimensions
C
865
L1
470
L14
715
D1 (∅
∅)
140
L2
382
L15
663
D2 (∅
∅)
170
L3
400
L16
163
D3 (∅
∅)
63
L4
18
L17
103
WB
1000
L5
100
L18
900
WW min
50
L6
230
L19
255
WW
max
85
L8
1326
L20
163
L9
510
L10
423
L11
100
L12
500
L13
500
D002127_A
005026
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
* Please, disregard the dimension L7*.
English
30/12/2011
287 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 08
English
30/12/2011
288 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
134 DOUBLE GIRDER HOIST ND, REEVING: 22
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
Hoist dimensions
HOL
Length
m
code
8.5
D
13
E
18
F
25
G
33.5
H
46
J
Motor dimensions
Motor
P5
M4 (mm)
722
Weight ( kg)
58
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
M1
mm
697
817
967
1157
1407
1757
P6
722
85
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
M3
mm
279
217
292
197
255
280
P7
762
105
H1
mm
705
705
855
855
1036
1236
T5
642
45
L7
mm
43
43
43
43
43
43
T6
722
65
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
L7*
mm
63
63
63
63
63
63
Min R
mm
1400
1400
1700
1700
2000
2400
Weight
kg
720
780
790
850
880
985
T7
722
71
Trolley dimensions
C
735
L1
382
L14
636
D1 (∅
∅)
110
L2
430
L15
660
D2 (∅
∅)
140
L3
400
L16
148
D3 (∅
∅)
63
L4
15
L17
88
M2
128
L5
98
L18
900
WB
1000
L6
320
L19
148
WW
min
50
L8
1296
L20
255
WW
max
85
L9
510
L10
420
L11
100
L12
488
L13
512
D002134_A
005028
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L7*.
English
30/12/2011
289 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 22
English
30/12/2011
290 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
135 DOUBLE GIRDER HOIST ND, REEVING: 24
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
8000
3m/M6
10000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
D
6.5
E
9
F
12.5
G
16.5
H
23
J
Motor dimensions
Motor
M3 (mm)
Weight ( kg)
P5
722
58
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
M1
mm
697
817
967
1157
1407
1757
P6
722
85
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
M2
mm
279
217
292
197
255
280
H1
mm
703
705
853
855
1034
1234
P7
762
105
T5
642
45
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
L7
mm
43
43
43
43
43
43
T6
722
65
L7*
mm
63
63
63
63
63
63
Min R
mm
1400
1400
1700
1700
2000
2400
Weight
kg
780
840
850
910
940
1045
T7
722
71
Trolley dimensions
C
801
L1
382
L14
648
D1 (∅
∅)
110
L2
470
L15
648
D2 (∅
∅)
140
L3
400
L16
722
D3 (∅
∅)
63
L4
15
L17
148
WB
1000
L5
98
L18
88
WW min
50
L6
320
L19
900
WW
max
85
L8
1296
L20
148
L9
510
L21
255
L10
420
L11
100
L12
500
L13
500
D002135_A
005030
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L7*.
English
30/12/2011
291 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 24
English
30/12/2011
292 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
136 DOUBLE GIRDER HOIST ND, REEVING: 26
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
E
6
F
8
G
11
H
15
J
Motor dimensions
Motor
P5
M3 (mm)
722
Weight ( kg)
58
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
M1
mm
817
967
1157
1407
1757
P6
722
85
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
M2
mm
217
292
197
255
280
P7
762
105
H1
mm
705
852
855
1033
1233
T5
642
45
L6
mm
73
73
73
73
73
T6
722
65
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
L6*
mm
93
93
93
93
93
Min R
mm
1400
1700
1700
2000
2400
Weight
kg
860
870
930
960
1065
T7
722
71
Trolley dimensions
C
831
L1
470
L14
703
D1 (∅
∅)
140
L2
382
L15
128
D2 (∅
∅)
170
L3
400
L16
163
D3 (∅
∅)
63
L4
100
L17
103
WB
1000
L5
320
L18
900
WW
min
50
L7
1326
L19
163
WW
max
85
L8
510
L20
255
L9
423
L21
18
L10
103
L11
460
L12
540
L13
623
D002132_A
005032
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L6*.
English
30/12/2011
293 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 26
English
30/12/2011
294 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
137 DOUBLE GIRDER HOIST ND, REEVING: 28
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
F
6
G
8
H
11.5
J
Motor dimensions
Motor
P5
M3 (mm)
722
Weight ( kg)
58
M1
mm
967
1157
1407
1757
P6
722
85
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
M2
mm
292
197
255
280
P7
762
105
H1
mm
851
855
1032
1232
T5
642
45
T6
722
65
L6
mm
73
73
73
73
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
L6*
mm
93
93
93
93
Min R
mm
1700
1700
2000
2400
Weight
kg
890
950
980
1085
T7
722
71
Trolley dimensions
C
831
L1
382
L14
700
D1 (∅
∅)
140
L2
470
L15
128
D2 (∅
∅)
170
L3
400
L16
163
D3 (∅
∅)
63
L4
100
L17
103
WB
1000
L5
320
L18
900
WW min
50
L7
1326
L19
163
WW
max
85
L8
510
L20
255
L9
423
L21
18
L10
100
L11
463
L12
537
L13
626
D002136_A
005034
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L6*.
English
30/12/2011
295 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Double Girder Hoist ND, REEVING: 28
English
30/12/2011
296 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
138 HIGH DOUBLE GIRDER HOIST ND, REEVING: 06
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
6
D
8
E
10
F
13
G
M1
mm
682
802
952
1142
Motor dimensions
Motor
P5
M3 (mm)
722
Weight ( kg)
58
P6
722
85
M2
mm
390
490
620
770
P7
762
105
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
H1
mm
557
657
802
952
T5
642
45
H2
mm
53
78
98
132
T6
722
65
L6
mm
73
73
73
73
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
L6*
mm
93
93
93
93
Min R
mm
1200
1400
1700
2000
Weight
kg
825
876
945
1020
T7
722
71
Trolley dimensions
C
436
L1
470
L14
663
D1 (∅
∅)
140
L2
382
L15
163
D2 (∅
∅)
170
L3
400
L16
103
D3 (∅
∅)
63
L4
18
L17
900
WB
1000
L5
100
L18
255
WW min
50
L7
1326
L19
163
WW
max
85
L8
510
L9
688
L10
100
L11
500
L12
500
L13
715
D002241_A
062247
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
* Please, disregard the dimension L6*.
English
30/12/2011
297 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 06
English
30/12/2011
298 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
139 HIGH DOUBLE GIRDER HOIST ND, REEVING: 08
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
D
6
E
8
F
10
G
M1
mm
682
802
952
1142
Motor dimensions
Motor
P5
M3 (mm)
722
Weight ( kg)
58
P6
722
85
M2
mm
390
490
620
770
P7
762
105
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
H1
mm
568
668
798
948
T5
642
45
H2
mm
44
53
76
98
T6
722
65
L6
mm
73
73
73
73
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
L6*
mm
93
93
93
93
Min R
mm
1200
1400
1700
2000
Weight
kg
845
896
965
1040
T7
722
71
Trolley dimensions
C
599
L1
470
L14
663
D1 (∅
∅)
140
L2
382
L15
163
D2 (∅
∅)
170
L3
400
L16
103
D3 (∅
∅)
63
L4
18
L17
900
WB
1000
L5
100
L18
255
WW min
50
L7
1326
L19
163
WW
max
85
L8
510
L9
688
L10
100
L11
500
L12
500
L13
715
D002242_A
062248
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
* Please, disregard the dimension L6*.
English
30/12/2011
299 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 08
English
30/12/2011
300 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
140 HIGH DOUBLE GIRDER HOIST ND, REEVING: 22
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
Hoist dimensions
HOL
Length
m
code
8.5
D
13
E
18
F
25
G
33.5
H
46
J
Motor dimensions
Motor
M3 (mm)
Weight ( kg)
P5
722
58
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
M1
mm
697
817
967
1157
1407
1757
P6
722
85
M2
mm
179
117
143
197
73
248
P7
762
105
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
H1
mm
605
605
705
855
850
1200
T5
642
45
T6
722
65
L5
mm
42
42
42
42
42
42
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
L5*
mm
62
62
62
62
62
62
Min R
mm
1200
1200
1400
1700
1700
2400
Weight
kg
750
775
835
915
959
1125
T7
722
71
Trolley dimensions
C
470
L1
430
L14
128
D1 (∅
∅)
110
L2
382
L15
148
D2 (∅
∅)
140
L3
400
L16
88
D3 (∅
∅)
63
L4
98
L17
900
WB
1000
L6
1296
L18
255
WW min
50
L7
510
L19
148
WW
max
85
L8
685
L20
15
L9
100
L10
488
L11
512
L12
636
L13
660
D002243_A
062250
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L5*.
English
30/12/2011
301 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 22
English
30/12/2011
302 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
141 HIGH DOUBLE GIRDER HOIST ND, REEVING: 24
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
8000
3m/M6
10000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
D
6.5
E
9
F
12.5
G
16.5
H
23
J
Motor dimensions
Motor
M3 (mm)
Weight ( kg)
P5
722
58
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
M1
mm
697
817
967
1157
1407
1757
P6
722
85
M2
mm
179
117
143
197
73
248
P7
762
105
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
H1
mm
605
605
705
855
850
1200
T5
642
45
T6
722
65
L5
mm
43
43
43
43
43
43
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
L5*
mm
63
63
63
63
63
63
Min R
mm
1200
1200
1400
1700
1700
2400
Weight
kg
810
835
895
975
1019
1185
T7
722
71
Trolley dimensions
C
536
L1
470
L14
128
D1 (∅
∅)
110
L2
382
L15
148
D2 (∅
∅)
140
L3
400
L16
88
D3 (∅
∅)
63
L4
98
L17
900
WB
1000
L6
1296
L18
255
WW min
50
L7
510
L19
148
WW
max
85
L8
685
L20
15
L9
100
L10
500
L11
500
L12
648
L13
648
D002244_A
062269
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L5*.
English
30/12/2011
303 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 24
English
30/12/2011
304 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
142 HIGH DOUBLE GIRDER HOIST ND, REEVING: 26
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
E
6
F
8
G
11
H
15
J
Motor dimensions
Motor
M3 (mm)
Weight ( kg)
P5
722
58
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
M1
mm
817
967
1157
1407
1757
P6
722
85
M2
mm
117
143
197
73
248
P7
762
105
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
H1
mm
605
705
855
850
1200
T5
642
45
T6
722
65
L5
mm
74
74
74
74
74
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
L5*
mm
94
94
94
94
94
Min R
mm
1200
1400
1700
1700
2400
Weight
kg
860
920
1000
1045
1210
T7
722
71
Trolley dimensions
C
566
L1
470
L14
128
D1 (∅
∅)
140
L2
382
L15
163
D2 (∅
∅)
170
L3
400
L16
103
D3 (∅
∅)
63
L4
100
L17
900
WB
1000
L6
1326
L18
255
WW min
50
L7
510
L19
163
WW
max
85
L8
688
L20
18
L9
103
L10
460
L11
540
L12
623
L13
703
D002245_A
062270
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L5*.
English
30/12/2011
305 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 26
English
30/12/2011
306 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
143 HIGH DOUBLE GIRDER HOIST ND, REEVING: 28
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
Hoist dimensions
HOL
Length
m
code
4.5
F
6
G
8
H
11.5
J
Motor dimensions
Motor
M3 (mm)
Weight ( kg)
P5
722
58
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
M1
mm
967
1157
1407
1757
P6
722
85
M2
mm
143
197
73
248
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
H1
mm
705
855
850
1200
P7
762
105
T5
642
45
T6
722
65
L5
mm
74
74
74
74
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
L5*
mm
94
94
94
94
Min R
mm
1400
1700
1700
2400
Weight
kg
940
1020
1065
1230
T7
722
71
Trolley dimensions
C
566
L1
470
L14
128
D1 (∅
∅)
140
L2
382
L15
163
D2 (∅
∅)
170
L3
400
L16
103
D3 (∅
∅)
63
L4
100
L17
900
WB
1000
L6
1326
L18
255
WW min
50
L7
510
L19
163
WW
max
85
L8
688
L20
18
L9
103
L10
463
L11
537
L12
626
L13
700
D002246_A
062271
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Min R with service platform and second brake.
Note: Standard rail gauges: 1400, 1700, 2000 and 2400.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L5*.
English
30/12/2011
307 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
High Double Girder Hoist ND, REEVING: 28
English
30/12/2011
308 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
144 NORMAL HEADROOM HOIST ND, REEVING: 06
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
6
D
8
E
10
F
13
G
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
100
E1
102
L7
288
610
E2
420
L8
714
M1
mm
682
802
952
1142
P5
722
58
P6
722
85
C
1325
E3
656
L9
40
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
H2
mm
53
78
98
132
P7
762
105
D1 (∅
∅)
125
E4
540
L10
40
D3 (∅
∅)
63
E5
302.5
L11
125
H5
mm
722
722
722
722
T5
642
45
E6
204
L12
2
H5*
mm
742
742
742
742
T6
722
65
H1
257
M3
229
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
Weight
kg
980
1000
1090
1150
Travelling dimensions
Motor
MF06MA
M4 (mm)
360
T7
722
71
H6
756
M6
148
L2
42
W1
97.5
L4
513
L5
170
MF06LA
400
L6
2
D002125_A
062276
Trolley dimensions
Length
L13
code
D/E
600
F/G
640
L15
332
632
Note: All dimensions in mm.
Note: Weight calculated with P5, when B=300 mm
* Please, disregard the dimension H5*.
English
30/12/2011
309 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 06
English
30/12/2011
310 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
145 NORMAL HEADROOM HOIST ND, REEVING: 06, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
6
D
8
E
10
F
13
G
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
120
E1
101
L7
288
300
E2
420
L8
817
M1
mm
682
802
952
1142
P5
722
58
P6
722
85
C
1430
E3
767
L9
40
D1 (∅
∅)
125
E4
540
L10
40
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
M3
mm
600
600
640
640
P7
762
105
D3 (∅
∅)
63
E5
302.5
L11
84
H2
mm
53
78
98
132
T5
642
45
H5
mm
722
722
722
722
T6
722
65
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
H5*
mm
742
742
742
742
Weight
kg
1360
1450
1600
1690
Travelling dimensions
Motor
MF06MA MF06LA
M4 (mm)
360
400
T7
722
71
R min
2500
E6
315
L12
8.5
H1
260
M3
232
H6
756
M6
148
L2
42
W1
97.5
L4
513
L5
170
L6
2
D004208_A
062277
Trolley dimensions
Length
L13
code
D/E
600
F/G
640
L15
340
640
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
* Please, disregard the dimension H5*.
English
30/12/2011
311 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 06, Curved Track
English
30/12/2011
312 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
146 NORMAL HEADROOM HOIST ND, REEVING: 08
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
D
6
E
8
F
10
G
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
80
E1
102
L7
288
610
E2
420
L8
714
M1
mm
682
802
952
1142
P5
722
58
P6
722
85
C
1488
E3
656
L9
40
D1 (∅
∅)
125
E4
540
L10
40
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
M3
mm
600
600
640
640
P7
762
105
D3 (∅
∅)
63
E5
302.5
L11
125
H2
mm
44
53
76
98
T5
642
45
H5
mm
730
730
730
730
T6
722
65
E6
204
L12
2
H1
269
M3
229
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
H5*
mm
750
750
750
750
Travelling dimensions
Motor
MF06MA MF06LA
M4 (mm)
360
400
T7
722
71
H6
747.5
M6
148
Weight
kg
990
1010
1100
1160
L2
42
W1
97.5
L4
513
L5
170
L6
2
D002128_A
062278
Trolley dimensions
Length
L13
code
D/E
600
F/G
640
L15
332
632
Note: Weight calculated with P5 motor, when B=300 mm.
Note: All dimensions in mm.
* Please, disregard the dimension H5*.
English
30/12/2011
313 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 08
English
30/12/2011
314 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
147 NORMAL HEADROOM HOIST ND, REEVING: 08, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
D
6
E
8
F
10
G
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
120
E1
101
L7
288
300
E2
420
L8
817
M1
mm
682
802
952
1142
P5
722
58
P6
722
85
C
1592
E3
767
L9
40
D1 (∅
∅)
125
E4
540
L10
40
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
M3
mm
600
600
640
640
P7
762
105
D3 (∅
∅)
63
E5
302.5
L11
84
H2
mm
44
53
76
98
T5
642
45
H5
mm
730
730
730
730
T6
722
65
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
H5*
mm
750
750
750
750
Weight
kg
1360
1450
1600
1700
Travelling dimensions
Motor
MF06MA MF06LA
M4 (mm)
360
400
T7
722
71
R min
2500
E6
315
L12
8.5
H1
272
M3
232
H6
747.5
M6
148
L2
42
W1
97.5
L4
513
L5
170
L6
2
D004209_A
062280
Trolley dimensions
Length
L13
code
D/E
600
F/G
640
L15
340
640
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
* Please, disregard the dimension H5*.
English
30/12/2011
315 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 08, Curved Track
English
30/12/2011
316 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
148 NORMAL HEADROOM HOIST ND, REEVING: 22
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
8.5
D
13
E
18
F
25
G
33.5
H
46
J
M1
mm
697
817
967
1157
1407
1757
Motor dimensions
Motor
P5
M2 (mm)
722
Weight ( kg)
58
Trolley dimensions
B min
B max
100
E2
420
L9
40
610
E3
617
L10
40
M3
mm
28.5
88.5
163.5
-96.5
28.5
203.5
P6
722
85
C
1318
E4
540
L12
1
D1 (∅
∅)
100
E5
302.5
M5
128
P7
762
105
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
H1
mm
245
245
245
600
600
600
H5
mm
679
679
679
679
679
679
T5
642
45
D3 (∅
∅)
63
E6
165
M6
148
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
T6
722
65
H6
798.5
W1
80.6
L2
33
H5*
mm
699
699
699
699
699
699
Weight
kg
770
790
810
1030
1070
1120
Travelling dimensions
Motor
MF06MA
M4 (mm)
360
T7
722
71
L4
516
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
L5
150
L6
2
L7
253
MF06LA
400
L8
676
D003134_A
062281
Trolley dimensions
Length
E1
code
D/E/F
215
G/H/J
13
L11
212
245
Note: Weight calculated with P5, when B=300 mm.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H5*.
English
30/12/2011
317 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 22
English
30/12/2011
318 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
149 NORMAL HEADROOM HOIST ND, REEVING: 22, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
E gear + P5/T5 motor
High
Low
8
1.3
8
1.3
Hoist dimensions
HOL
Length
m
code
8.5
D
13
E
18
F
25
G
33.5
H
46
J
M1
mm
697
817
967
1157
1407
1757
Motor dimensions
Motor
P5
M2 (mm)
722
Weight ( kg)
58
P6
722
85
Trolley dimensions
B min
B max
90
E2
420
L9
42
350
E3
732
L10
40
C
1438
E4
540
L12
8.5
D1 (∅
∅)
100
E5
302.5
M5
128
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
M3
mm
28.5
88.5
163.5
-201.5
-76.5
98.5
P7
762
105
H1
mm
245
245
245
705
705
705
T5
642
45
D3 (∅
∅)
63
E6
280
M6
148
H5
mm
679
679
679
679
679
679
T6
722
65
H6
798.5
W1
80.6
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
H5*
mm
699
699
699
699
699
699
Weight
kg
1080
1160
1240
1490
1580
1700
Travelling dimensions
Motor
MF06MA
M4 (mm)
360
T7
722
71
L2
33
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
L4
516
L5
150
L6
2
L7
253
MF06LA
400
L8
783
D004206_A
062282
Track radius
B
90 110 120 -
109
119
350
R min
2500
2000
1500
Trolley dimensions
Length
E1
code
D/E/F
195
G/H/J
93
L11
202
140
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H5*.
English
30/12/2011
319 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 22, Curved Track
English
30/12/2011
320 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
150 NORMAL HEADROOM HOIST ND, REEVING: 24
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
6300
3m/M6
8000
3m/M6
10000
2m/M5
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
4
D
6.5
E
9
F
12.5
G
16.5
H
23
J
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
80
E2
420
L9
40
610
E3
617
L10
40
M1
mm
697
817
967
1157
1407
1757
P5
722
58
P6
722
85
C
1294
E4
540
L12
1
D1 (∅
∅)
100
E5
302.5
M4
400
M3
mm
28.5
88.5
163.5
-96.5
28.5
203.5
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
H1
mm
245
245
245
600
600
600
P7
762
105
D3 (∅
∅)
63
E6
165
M5
128
H5
mm
693
693
693
693
693
693
T5
642
45
H6
785.5
M6
148
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
H5*
mm
713
713
713
713
713
713
T6
722
65
L2
33
W1
80.6
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
Weight
kg
790
800
830
1050
1080
1130
T7
722
71
L4
516
L5
150
L6
2
L7
253
L8
676
D003135_A
062290
Trolley dimensions
Length
E1
code
D/E/F
215
G/H/J
13
L11
212
245
Note: Weight calculated with P5 motor, when B=300 mm.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H5*.
English
30/12/2011
321 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 24
English
30/12/2011
322 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
151 NORMAL HEADROOM HOIST ND, REEVING: 24, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
6300
3m/M6
8000
3m/M6
10000
2m/M5
E gear + P5/T5 motor
High
Low
4
0.7
4
0.7
4
0.7
Hoist dimensions
HOL
Length
m
code
4
D
6.5
E
9
F
12.5
G
16.5
H
23
J
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
90
E2
420
L9
42
350
E3
732
L10
40
M1
mm
697
817
967
1157
1407
1757
P5
722
58
P6
722
85
C
1414
E4
540
L12
7
D1 (∅
∅)
100
E5
302.5
M4
400
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
5
0.8
M3
mm
28.5
88.5
163.5
-201.5
-76.5
98.5
H1
mm
245
245
245
705
705
705
P7
762
105
D3 (∅
∅)
63
E6
280
M5
128
H5
mm
693
693
693
693
693
693
T5
642
45
H6
785.5
M6
148
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
8
1.3
H5*
mm
713
713
713
713
713
713
T6
722
65
L2
33
W1
80.6
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
10
1.7
Weight
kg
1060
1140
1220
1460
1560
1740
T7
722
71
L4
516
L5
150
L6
2
L7
253
L8
783
D004207_A
062291
Track radius
B
90 - 109
110 - 119
120 - 350
R min
2500
2000
1500
Trolley dimensions
Length
code
D/E/F
G/H/J
E1
L11
195
93
202
140
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H5*.
English
30/12/2011
323 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 24, Curved Track
English
30/12/2011
324 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
152 NORMAL HEADROOM HOIST ND, REEVING: 26
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
4
E
6
F
8
G
11
H
15
J
M1
mm
817
967
1157
1407
1757
Motor dimensions
Motor
P5
M2 (mm)
722
Weight ( kg)
58
P6
722
85
Trolley dimensions
B min
B max
80
E2
420
L9
40
610
E3
666
L10
40
C
1335
E4
540
L12
1
D1 (∅
∅)
125
E5
302.5
M5
128
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
M3
mm
8.5
83.5
178.5
28.5
203.5
P7
762
105
H1
mm
325
325
325
600
600
T5
642
45
D3 (∅
∅)
63
E6
214
M6
148
H5
mm
697
697
697
697
697
T6
722
65
H6
780.5
W1
97.5
L2
42
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
H5*
mm
717
717
717
717
717
Travelling dimensions
Motor
MF06MA
M4 (mm)
360
T7
722
71
L4
516
Weight
kg
940
970
1030
1220
1300
L5
170
L6
2
L7
288
MF06LA
400
L8
725
D003136_A
062292
Trolley dimensions
Length
E1
code
E/F/G
93
H/J
113
L11
220
245
Note: Weight calculated with P5 motor, when B=300 mm.
Note: All dimensions in mm.
Note: gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H5*.
English
30/12/2011
325 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 26
English
30/12/2011
326 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
153 NORMAL HEADROOM HOIST ND, REEVING: 26, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
4
E
6
F
8
G
11
H
15
J
M1
mm
817
967
1157
1407
1757
Motor dimensions
Motor
P5
M2 (mm)
722
Weight ( kg)
58
P6
722
85
Trolley dimensions
B min
B max
120
E2
420
L9
40
300
E3
767
L10
40
C
1441
E4
540
L12
7
D1 (∅
∅)
125
E5
302.5
M5
128
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
M3
mm
41.5
116.5
-136.5
-11.5
163.5
P7
762
105
H1
mm
292.5
292.5
640
640
640
T5
642
45
D3 (∅
∅)
63
E6
315
M6
148
H5
mm
697
697
697
697
697
T6
722
65
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
H5*
mm
717
717
717
717
717
Weight
kg
1340
1420
1660
1760
1940
Travelling dimensions
Motor
MF06MA
M4 (mm)
360
T7
722
71
MF06LA
400
R min
2500
H6
780.5
W1
97.5
L2
42
L4
516
L5
170
L6
2
L7
288
L8
818
D004201_A
062294
Trolley dimensions
Length
E1
code
E/F
148
G/H/J
158
L11
155
205
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H5*.
English
30/12/2011
327 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 26, Curved Track
English
30/12/2011
328 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
154 NORMAL HEADROOM HOIST ND, REEVING: 28
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
F
6
G
8
H
11.5
J
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
80
E2
420
L9
40
610
E3
666
L10
40
M1
mm
967
1157
1407
1757
P5
722
58
P6
722
85
C
1335
E4
540
L12
1
D1 (∅
∅)
125
E5
302.5
M5
128
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
M3
mm
83.5
178.5
28.5
203.5
P7
762
105
D3 (∅
∅)
63
E6
214
M6
148
H1
mm
325
325
600
600
T5
642
45
H6
778.5
W1
97.5
H5
mm
699
699
699
699
T6
722
65
L2
42
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
H5*
mm
719
719
719
719
Travelling dimensions
Motor
MF06MA
M4 (mm)
360
T7
722
71
L4
516
Weight
kg
990
1040
1230
1320
L5
170
L6
2
L7
288
MF06LA
400
L8
725
D003137_A
062296
Trolley dimensions
Length
E1
code
E/F/G
93
H/J
113
L11
220
245
Note: Weight calculated with P5 motor, when B=300 mm.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H5*.
English
30/12/2011
329 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 28
English
30/12/2011
330 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
155 NORMAL HEADROOM HOIST ND, REEVING: 28, CURVED TRACK
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
F
6
G
8
H
11.5
J
Motor dimensions
Motor
M2 (mm)
Weight ( kg)
Trolley dimensions
B min
B max
120
E2
420
L9
40
300
E3
767
L10
40
M1
mm
967
1157
1407
1757
P5
722
58
P6
722
85
C
1441
E4
540
L12
7
D1 (∅
∅)
125
E5
302.5
M5
128
M3
mm
116.5
-136.5
-11.5
163.5
P7
762
105
D3 (∅
∅)
63
E6
315
M6
148
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
H1
mm
292.5
640
640
640
T5
642
45
H5
mm
699
699
699
699
T6
722
65
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
H5*
mm
719
719
719
719
Weight
kg
1440
1680
1780
1950
Travelling dimensions
Motor
MF06MA
M4 (mm)
360
T7
722
71
MF06LA
400
R min
2500
H6
778.5
W1
97.5
L2
42
L4
516
L5
170
L6
2
L7
288
L8
818
D004202_A
062297
Trolley dimensions
Length
E1
code
F
148
G/H/J
158
L11
155
205
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension H5*.
English
30/12/2011
331 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Normal Headroom Hoist ND, REEVING: 28, Curved Track
English
30/12/2011
332 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
156 FIXED HOIST ND, REEVING: 06
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
Hoist dimensions
HOL
Length
m
code
6
D
8
E
10
F
13
G
Motor dimensions
Motor
M4 (mm)
Weight ( kg)
Trolley dimensions
C
D1 (∅
∅)
683
L1
1280
18
L2
515
M1
mm
682
802
952
1142
P5
722
58
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
M2
mm
1140
1140
1480
1480
P6
722
85
M3
mm
261
141
291
101
P7
762
105
H2
mm
53
78
98
132
T5
642
45
T6
722
65
J gear + P7/T7 motor
High
Low
6.3
1.1
6.3
1.1
L4
mm
736
736
736
736
L4*
mm
756
756
756
756
Weight
kg
620
630
685
700
T7
722
71
H1
360
L3
565
L5
30
L6
500
L7
440
L8
90
L9
197
L10
696
D002123_A
062191
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
* Please, disregard the dimension L4*.
English
30/12/2011
333 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 06
English
30/12/2011
334 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
157 FIXED HOIST ND, REEVING: 08
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
D
6
E
8
F
10
G
Motor dimensions
Motor
M4 (mm)
Weight ( kg)
Trolley dimensions
C
D1 (∅
∅)
772
L1
1280
18
L2
515
M1
mm
682
802
952
1142
P5
722
58
M2
mm
1140
1140
1480
1480
P6
722
85
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
M3
mm
261
141
291
101
P7
762
105
H2
mm
44
53
76
98
T5
642
45
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
L4
mm
736
736
736
736
T6
722
65
L4*
mm
756
756
756
756
Weight
kg
625
635
650
670
T7
722
71
H1
372
L3
565
L5
30
L6
440
L7
500
L8
90
L9
197
L10
696
D002126_A
062192
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
* Please, disregard the dimension L4*.
English
30/12/2011
335 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 08
English
30/12/2011
336 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
158 FIXED HOIST ND, REEVING: 22
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
4000
3m/M6
5000
2m/M5
Hoist dimensions
HOL
Length
m
code
8.5
D
13
E
18
F
25
G
33.5
H
46
J
Motor dimensions
Motor
M4 (mm)
Weight ( kg)
F gear + P5/T5 motor
High
Low
10
1.7
10
1.7
M1
mm
696
816
966
1156
1406
1756
P5
722
58
M2
mm
1110
1110
1110
1110
1710
1710
P6
722
85
H gear + P6/T6 motor
High
Low
16
2.7
16
2.7
M3
mm
253
193
118
23
198
23
P7
762
105
H1
mm
650
650
650
650
950
950
T5
642
45
J gear + P7/T7 motor
High
Low
20
3.3
20
3.3
L7
mm
976
976
976
976
976
976
T6
722
65
L7*
mm
996
996
996
996
996
996
Weight
kg
380
440
450
490
605
1000
T7
722
71
Trolley dimensions
C
D1 (∅
∅)
640
L1
1280
L14
150
18
L2
515
L3
510
L4
5
L5
297
L6
403
L8
90
L9
325
L10
440
L11
500
L12
519
L13
128
D002129_A
062199
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L7*.
English
30/12/2011
337 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 22
English
30/12/2011
338 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
159 FIXED HOIST ND, REEVING: 24
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
8000
3m/M6
10000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
D
6.5
E
9
F
12.5
G
16.5
H
23
J
Motor dimensions
Motor
M4 (mm)
Weight ( kg)
F gear + P5/T5 motor
High
Low
5
0.8
5
0.8
M1
mm
696
816
966
1156
1406
1756
P5
722
58
M2
mm
1110
1110
1110
1110
1710
1710
P6
722
85
H gear + P6/T6 motor
High
Low
8
1.3
8
1.3
M3
mm
253
193
118
23
198
23
P7
762
105
H1
mm
648
648
648
648
948
948
T5
642
45
J gear + P7/T7 motor
High
Low
10
1.7
10
1.7
L7
mm
976
976
976
976
976
976
T6
722
65
L7*
mm
996
996
996
996
996
996
Weight
kg
440
500
530
570
685
1000
T7
722
71
Trolley dimensions
C
D1 (∅
∅)
706
L1
1280
L14
150
18
L2
515
L3
510
L4
5
L5
285
L6
415
L8
90
L9
325
L10
440
L11
500
L12
519
L13
128
D002130_A
062201
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L7*.
English
30/12/2011
339 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 24
English
30/12/2011
340 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
160 FIXED HOIST ND, REEVING: 26
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
12000
3m/M6
15000
2m/M5
Hoist dimensions
HOL
Length
m
code
4
E
6
F
8
G
11
H
15
J
Motor dimensions
Motor
M4 (mm)
Weight ( kg)
F gear + P5/T5 motor
High
Low
3.2
0.5
3.2
0.5
M1
mm
816
966
1156
1406
1756
P5
722
58
M2
mm
1110
1110
1110
1710
1710
P6
722
85
H gear + P6/T6 motor
High
Low
5
0.8
5
0.8
M3
mm
193
118
23
198
23
P7
762
105
H1
mm
647
647
647
947
947
T5
642
45
J gear + P7/T6 motor
High
Low
6.3
1.1
6.3
1.1
L7
mm
976
976
976
976
976
T6
722
65
L7*
mm
996
996
996
996
996
Weight
kg
520
530
590
705
1000
T7
722
71
Trolley dimensions
C
D1 (∅
∅)
739
L1
1280
L14
128
18
L2
515
L3
510
L4
5
L5
280
L6
420
L8
90
L9
325
L10
440
L11
500
L12
519
L13
150
D002131_A
005112
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L7*.
English
30/12/2011
341 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 26
English
30/12/2011
342 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
161 FIXED HOIST ND, REEVING: 28
Hoisting speed (m/min)
Load
Class
kg
Fem/ISO
16000
2m/M5
20000
1Am/M4
F gear + P5/T5 motor
High
Low
2.5
0.4
2.5
0.4
Hoist dimensions
HOL
Length
m
code
4.5
F
6
G
8
H
11.5
J
Motor dimensions
Motor
M4 (mm)
Weight ( kg)
M1
mm
966
1156
1406
1756
P5
722
58
M2
mm
1110
1110
1710
1710
P6
722
85
H gear + P6/T6 motor
High
Low
4
0.7
4
0.7
M3
mm
118
23
198
23
P7
762
105
H1
mm
655
655
955
955
T5
642
45
J gear + P7/T7 motor
High
Low
5
0.8
5
0.8
L8
mm
976
976
976
976
T6
722
65
L8*
mm
996
996
996
996
Weight
kg
550
610
725
1000
T7
722
71
Trolley dimensions
C
D1 (∅
∅)
739
L1
128
L14
519
18
L2
1280
L3
515
L4
510
L5
5
L6
277
L7
423
L9
90
L10
325
L11
440
L12
500
L13
150
D002133_A
005118
Note: Weight calculated with P5 motor.
Note: All dimensions in mm.
Note: Gear brake as standard brake for drum lengths H and J.
* Please, disregard the dimension L8*.
English
30/12/2011
343 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.
TECHNICAL GUIDE FOR HOISTS
Fixed Hoist ND, REEVING: 28
English
30/12/2011
344 / 344
This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced,
disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights
reserved.