Specifications GMGB Molsieve l3X-LTG

Molecular Sieves l3X-LTG
are
crystalline
alumino
silicae with SiO2, Al2O3 as 2i1. I! is fonned by an exteDsive
cross linking of AlO.1 and SiO4 tetrahedra, .esulring in a
unifonn pol€ opening of 1.O nln. GMCB Danufactures 13X
LTG 'nolecular sieves nl L\e lbrm of extruded pellets and
spheres by the State of the An technology in iis plant at
Mehsana (Gujdat India). The products comfonably confonn
to the specifications specified in the Bureau of Indian Standdds
: BIS 1.121l:199.1.GMGB uses clays from its own nines iD
the manufactlre of this pr'oduct, ensuring better control and
unifonnily in lhe quality of tbe final product.
The micro-porous crystalline structure of I3X-LTG coupled
with selective adsorytivity. high adsopdion capacity and ability
to be rcgenerated at substantially lower tempeture. mates them
especial attractive for Air Sepantion Units designed fbr low
energy consumption.
Specifications
GMGB Molsievel3X-LTG
Nominal Dia :10Ao
1Ao = 103 cm
1,5 mm dia
cylindrical pelets
3.0 mm dia
Cylindrical Pellets
2-4 mm spheres
Unit
Range
Typical
Range
Typical
Range
EquilibriumWater Adsorption
Capacityat 30 deg.C
157,RH
a/o
21.526
22.5
21.5-26
23.\)
23.0-27
25.5
'75Vc
RH
To
21-29.5
21.5
21-29
2'7.5
26-29.5
28.0
Vo
21.5-26
22.5
21.5-26
23.0
230-210
EA
19.0-
20.5
19.02t.5
6-12
20.-5
0.020.25
0.15
Thermal Stability afrer 600
Deg.CEquilibriumWater
AdsorptionCapacityat 30
Deg.C& 157,RH
CO?Ads. Capacityunder760
Illm Hg. & at 30 Deg.C
Crushing Stength (Active)
Attrition Loss on Tumbling
Free Moisture(Max.)
Bulk Density
Bed Crushing Strength
2r.5
Kg.
5.0
m-25
20.5
Vo
3.0-7.0
0.020.15
%
1.5
gms/
0.580.64
0.6
0.580.64
0.6
0.64-0;7
0.66
Vo
80-90
8.t.0
80-90
86.0
80-90
85.0
0.1
8.0
1.5
0.02-0.25 {J.1
1.5
Packing :
Molecdar SievesGMGB l3X-LTC are packedfor indusrrialusein airrighrMS
drums under hot conditionswith proper sealingarangemenrso rhai there is no
ingressof moisturcduring storageandtransport.StandardPacking: 200/210Lit.
drum size 570 x 860 (H) mm.
Lile :
MOL.SIEVES 13X-LTG hasinfinite shelf life. when storesin packedconditionThe active sewjce life wouid depend,however.on th€ operatingconditions of
the plant, actual application,and the usageby the customer.
Loading :
MOL.SIEVES I3X-LTG doesnot require any specialprecartion or procedure
dunng loading.However,the healthof the grjd supponis to be checked,and the
vesselis to be cleanedof dust,foreignpaticles. etc.beforethe adso$entis loaded.
During actualloading,the materialshouldbe pourcdcaretully lbroughfunnet and
chute so as to avoid dusiing and attrition due to impacr of free fall. The drums
shouldbe kept in ihe coveredshed.In caseof prolongedexposureof the adsorbenr
to moisture dudng storage/ loading. it may requie prolongedrcgenerationat
higher temp€ratweto restoreits tull adsorptivecapaciqr.
',#6ilgiEvB ltfldrrqlrrxll,{{q'rgr4rlrxr
{ufl
Material SafetvData :
The productassuchis neitherinflanrmable,non toxic. Overall,ir is nor hazardous.
Repeatedexposuremay iritate skin. eyes and respiratorysysrem.The product
gershot as it is tusl exposedto atmospheredue !o adsorptionof moisture.
Regeneration:
MOL Sieves13X-LTG shouldbe regeneratedtiemally or by evacuationwidr
simultaneouspuge. For thennalregeneration,the adsorbentmay by heatedro 110
- 120 deg.Cfbr removal of CO2. For sirnulianeousremoval of H2O and CO2,
theadsorbent
shouldbe heatedto 160-200de9.C.
Howevertheexactregeneration
condition (temperature,purge gas flow. etc.) dependson the application, feed
qurlity and other operatingconditions.
't'r'l,li6['3iHira"{,5'{,,lTg'TJ'g5ii3lg3T8,ifr''
ABpucatlarsL
2.
3.
4.
5.
Simultaneousremovalof Moisture and CO2 from feed an or Alr Separation
/ CryogenicPlant.
rvlercdprdn,
rero\il fromgaseou\
\rerm\.
Processair drying ofdew point lessthan (rninus) 60 deg.Cfor suphonation
plant.
Swe€teningof Natural Gd5
Removal of H2S liom gaseousstreams.
CujaratMulti GasBaseChemicals
Pr1.Ltd.
MarketingOffice r
Opp. ONGCNagar,Palavasna,
Nlehsana-384003.
(NodhGujarat),INDIA
Tel.No. :+9'l 2762-225566,225577
Fax No. : +91 2762-225544
E-mail : [email protected]
[email protected]
f-= l
tvl
C-11,3rd
Floor,KishnaC.S.H.Ltd,Subhash
Road,
NearGaruare
HouseVilePafe(East)Mumba400
057
Ph.: +91-22-268351
30,32979944,
Fax No.: +91-22-26a35a7
E-mai: [email protected],
[email protected]
8-B,Navdeep
Aparlments,
B/hC. U. ShahColLage,
NavjlvanPressRoad,AshrcmRoad,Ahmedabd-14
Tel.No.: +91-79-2754431
I, Fax: +91-79-27
544314
Website: www.gmgbc.in
BRANCHES; KOLKATA,DELHI,CHENNAI,INDORE.HYDERABAD& SINGAPORE.
Molecr ar Sieves GMGB 5A are crystalline alumino silicate
wrrhSiO2.Al2O3as 2:1.Il i. lormedb) an e\tenci\ecross
linking of AlO4 and SiO4 tetahedra,resultingin a unilbm pore
openingof 0.5 nm. GMGB manulactres 5A molecularsieves
in the folm of extrudedpellets and spheresby the Stateof the
Art technology in its plant at Mehsana (Gujamt-India) The
productscomfortablyconfom to the specificationsspecifiedin
BIS 142171994.Specifically
the Buleauof IndianStandards:
it has very high water adsolption capacity, and mechanical
strength,and at the sametime very low attrition loss. GMGB
usesclaysflom its own minesin the manufacturcof this product,
ensuringbetter control and unifomity in the quality ofthe final
product.
Specifications
GMGB Molsieve5A
LAo= 103 cm
Nominal Dia | 5Ao
Form : Cylindrical pellets & Spherer
3,0 rnm dia
1.5 mm dia
pellets
Pellets
Cylindrical
cylindrical
Tl?ical
2-4 mm spheres
Range
Typical
Unit
Range
Typical
Range
Equilibrium water Adsorytion
Capacityat 30 deg.C
157oRH
Io
18-22
20.5
r8-22
20.5
18.022.t)
'7
5VoRE
Vo
2l-25
23.0
2l-25
23.0
21.0-25.0 23.0
a/o
t8 22
20.5
18-22
20.5
18.0-22.0 20.0
Kg.
E.
3.07.0
11-22
4.0
20.0
8-15
10.0
20.0
3.0-8.0 5.0
t'7.0-22.0 20.0
0.2
0.02-0.3
Themal Stability after 600
Deg.CEquilibriumwater
AdsorptionCapacityat 30
Deg.C& 157oRH
Crushing Stength lActjve)
CO, Ads. Capacity 760 mm
Hg. at 30 Deg.C
Attrition Loss on Tumbling
Frce Moisture (Max.)
Bulk Density
Bed Crushing Strength
Vo
0.02-0.2
0.1
0.02-0.3
t.)
1o
gms/cc t.70-0.80 0.?5
Vo
11-22
80-90
84.0
0.70-0.80 0.75
80-90
86.0
20.0
0.1
1.5
0.75-0.8s 0.81
85.0
80-90