Superior Refrigeration Products

Transcription

Catalog No. R-2001
Superior…Supplying Quality Products
To The ACR Industry Since 1938
Air Conditioning and Refrigeration Valves, Wrot and Flare
Fittings, and Accessories
Sherwood • 2200 North Main Street, Washington, PA 15301-6181 • Phone: 724-225-8000 • Fax: 724-225-6188
www.sherwoodvalve.com • E-mail: [email protected]
Catalog No. R-2001
Air Conditioning and Refrigeration Valves,
Wrot and Flare Fittings, and Accessories
Table of Contents
Contents
Page
Integra-Seal Ball Valves
WA Series(Welded) ............................
2-3
Line Valves - “Tuffy” Series
Diaphragm Packless Valves ...............
4-9
®
LPD Globe Valves
Globe and Angle Valves ..................... 10-11
H-V Check Valves
Horizontal or Vertical Installation ........ 12-15
In-Line Check Valves ..........................
16
Liquid Indicators and Sight Glasses .. 64-17
Dual Pressure Relief Valve Assembly 18-19
Pressure Relief Valves
“A” Series ............................................ 20-21
Relief Valve Capacity Equations ....... 64-22
Packed Angle Valves .......................... 23-26
Straight Tube Heat Exchangers
Superheater II Features
and Specifications ............................... 64-27
Copper Filter-Driers
All Molecular Sieve Filter-Driers
for Moisture and Acid Removal ........... 64-28
Filter and Drier Cartridges
For 4 3⁄4 Inch OD Steel Shells .............. 64-29
Suction Line Filters
Type CFA Uni-Form® Shell and
Replaceable Cartridges ...................... 30-34
Suction Line Cores for CFA Shells
A25, A35, A45, and A55 Temporary
Acid Removal Suction Line Cores
for Temporary Installation in Place
of “F” or “DF” Cartridges ..................... 35-37
Liquid Line Cores for CFA Shells
CD35, CD45, and CD55
Char-Core® Liquid Line Cores ............. 38-39
Service Tools ....................................... 64-40
Water Bubbler ..................................... 64-40
Flare Fittings ....................................... 41-44
Wrot Copper Fittings .......................... 45-55
Joining Processes (Soldering
and Brazing) ........................................ 56-57
Engineering Data
Wrot Copper Fittings ........................... 58-59
Spare Parts List ................................... 60-61
Codes, Regulations, and
Specifications ...................................... 64-62
© COPYRIGHT, HARSCO CORPORATION, 1999
1
®
Ball Valves
WA Series (Welded)
WAS Series (Welded with Access Fitting)
Robotically Welded Body Joint! Full Size
Ports for Unrestricted Flow!
®
The new line of
ball
valves employ the latest robotic welding
technology. Every continuous welded body
joint is 100% factory tested to ensure
positively leak-free performance.
Dual Teflon* ball seals surround a polished
brass or chrome plated steel ball at each
end. A secondary seal becomes effective if
foreign material scores the primary seal . . .
even in extremely unfavorable conditions
such as compressor burnout – a Superior
exclusive!
®
ball valves are
constructed using all forged brass body
with copper tube extensions on all sizes.
Mechanical internal forged stops ensure
positive open or closed positions – another
Superior exclusive! Full open to full close
with 1⁄4 turn.
All sizes incorporate a dual stem seal
design utilizing Teflon packing compressed
by an internal packing nut forming the
primary seal. The unique seal cap design
permits valve operation without removal of
the seal cap and uses Teflon gaskets to
provide a secondary seal – a third Superior
®
Catalog
Number
WA Series
®
WAS Series (with Access Fitting)
Seal Cap
IBCA
Number
586WA-6ST
58651
586WA-8ST
58652
586WA-10ST
58564
587WA-12ST
58659
587WA-14ST
58584
591WA-11ST
58756
592WA-13ST
58790
593WA-15ST
58793
594WA-21ST
58865
594WA-25ST** 57538
594WA-31ST** 57778
595WA-25ST
60235
596WA-31ST
59143
596WA-35ST** 59146
596WA-41ST** 59150
**Reduced Ports
METRIC SIZES AVAILABLE1⁄8
586WAV-10MM 58928
586WAV-12MM 58931
586WAV-15MM 58934
586WAV-16MM 58076
587WAV-18MM 58938
587WAV-22MM 58079
591WAV-28MM 59082
592WAV-35MM 59085
593WAV-42MM 59318
With Access
Fitting
exclusive! There are no synthetic “O” rings.
Ball internal relief port design ensures
shut-off in either direction of flow . . . even
during evacuation of the system. Full flow
ports in all sizes 3⁄8" through 31⁄8".
®
All
ball valves are nondirectional flow and may be installed in any
position.
*Registered Trademark of Dupont
Size (Inches)
IBCA
Connection Ball Port
Number
(ODS)
Diameter
586WAS-6ST
586WAS-8ST
586WAS-10ST
59726
59727
59728
587WAS-14ST
591WAS-11ST
592WAS-13ST
593WAS-15ST
594WAS-21ST
59729
59730
60072
59731
59732
595WAS-25ST
596WAS-31ST
60316
59733
1
⁄8
⁄8
1
Consult Factory For
⁄8
1
Availability of Access
⁄8
1
Fittings in Metric Sizes
⁄8
or For Other Sizes 1Not
⁄8
Shown
1
⁄8
1
⁄8
1
⁄8
1
OPEN
CLOSE
2
Seal Cap
Exclusive Seal Cap design permits operation of valve without
removal. Markings on cap top designates at-a-glance open or
closed ball position.
3
Weight (Pounds)
WA
WAS
⁄8
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
25⁄8
31⁄8
35⁄8
41⁄8
0.50
0.50
0.50
0.75
0.75
1.00
1.50
1.50
2.01
2.01
2.01
2.44
2.91
2.91
2.91
0.7
0.7
0.7
1.0
1.0
2.2
3.8
3.8
8.0
11.0
11.0
15.0
25.0
26.0
27.0
0.77
0.77
0.77
N/A
1.10
2.42
4.18
4.18
8.80
N/A
N/A
15.80
26.00
N/A
N/A
10MM
12MM
15MM
16MM
18MM
22MM
28MM
35MM
42MM
0.50
0.50
0.50
0.50
0.75
0.75
1.00
1.50
1.50
0.7
0.7
0.7
0.7
1.0
1.0
2.2
3.8
3.8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1
®
WA Series (Welded)
WAS Series (Welded with Access Fitting)
Full refrigeration service temperature
range of -40°F to +325°F (-40°C to
+149°C).
WAS Series includes access fitting,
strategically located on tube
extension.
Forged brass body and seal cap
No synthetic “O” ring seals. Double seal
protection provides a Superior stem
design.
U.L. and C-U.L. Listed File No. 3462 (N)
except for metric sizes.
Polished brass or chrome plated
steel ball.
Seal cap design permits valve
operation without removal of seal cap
Design Working Pressure: 500 psig
(36 kg/cm2).
Catalog
Number
With Access
Fitting
586WA-6ST
586WAS-6ST
586WA-8ST
586WAS-8ST
586WA-10ST
586WAS-10ST
587WA-12ST
587WA-14ST
587WAS-14ST
591WA-11ST
591WAS-11ST
592WA-13ST
592WAS-13ST
593WA-15ST
593WAS-15ST
594WA-21ST
594WAS-21ST
594WA-25ST**
594WA-31ST**
595WA-25ST
595WAS-25ST
596WA-31ST
596WAS-31ST
596WA-35ST**
596WA-41ST**
**Reduced Ports
METRIC SIZES AVAILABLE
586WAV-10MM
586WAV-12MM
586WAV-15MM Consult Factory For
Availability of
586WAV-16MM
587WAV-18MM Access Fittings in
587WAV-22MM
Metric Sizes
591WAV-28MM
or
For
Other Sizes
592WAV-35MM
Not
Shown
593WAV-42MM
Integra-Seal
WA Series
®
®
All
ball valves are
suitable for use with R11, R12, R22,
R123, R125, R134A, R402A, R402B,
R404A, R500, R502, and R507 and for
industrial oxygen usages. (not U.L. Listed
for oxygen). For gases or liquids not listed
please consult factory.
Spare Parts List, pgs. 64-65
Dimensions (Inches)
A
B
C
D
E
F
Maximum
Width
6.50
6.50
6.50
6.56
6.56
7.69
8.88
9.13
9.88
12.88
13.75
12.92
16.31
16.03
16.03
0.31
0.38
0.50
0.63
0.75
0.94
1.00
1.09
1.34
1.44
1.63
1.50
1.69
1.94
1.94
0.56
0.56
0.56
0.73
0.73
1.03
1.42
1.42
1.85
1.85
1.85
2.30
2.75
2.75
2.75
1.80
1.80
1.80
1.96
1.96
2.37
2.73
2.73
3.11
3.11
3.11
3.95
4.35
4.35
4.35
3.44
3.44
3.44
3.46
3.46
4.01
4.49
4.62
5.07
6.57
7.01
6.52
8.32
8.32
8.32
1.75
1.75
1.75
N/A
2.00
1.75
2.21
2.21
2.57
N/A
N/A
3.35
3.63
N/A
N/A
1.38
1.38
1.38
1.88
1.88
2.31
3.19
3.19
4.06
4.06
4.06
4.65
5.63
5.63
5.63
3.60
7.40
14.60
22.30
30.00
62.00
110.00
135.00
270.00
250.00
240.00
340.00
480.00
455.00
430.00
6.50
6.50
6.50
6.50
6.50
6.41
7.40
8.88
9.12
0.31
0.38
0.50
0.50
0.58
0.67
0.79
1.00
1.25
0.56
0.56
0.56
0.56
0.73
0.73
1.01
1.42
1.42
1.80
1.80
1.80
1.80
1.96
1.96
2.37
2.73
2.73
3.44
3.44
3.44
3.44
3.44
3.38
3.87
4.50
4.50
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.38
1.38
1.38
1.38
1.88
1.88
2.31
3.19
3.19
3.60
7.40
14.60
14.60
22.30
30.00
62.00
110.00
135.00
Integra-Seal
WAS Series
C
V
®
3
Diaphragm Packless Valves
All diaphragm packless valves contain metal
diaphragms and backseat metal to metal
when the valve is fully open. Controlled stem
travel assures life-time diaphragm performance; balanced bearing surfaces and
polished stem heads eliminate wear and
assure smooth, easy operation. Flow is
“Tuffy” Line Valves
unrestricted. All OD solder connections for
valves 7⁄8" and smaller are machined to an
outside diameter equivalent to the next
largest standard size of tubing. Because of
their unique construction, Superior
diaphragm packless valves can be soldered
into the line without disassembly.
“Comfortgrip” nylon handwheels are furnished on all types of valves. Types 214,
215, and 216 Underwriters’ Laboratories and
Canadian Standards Association listed.
Catalog
Number
IBCA
Number
“Tuffy” Standard
214-4
214-6
215-8
216-10
56381
56384
56400
56409
56382
56385
56401
56410
214-4ST
214-6ST
215-8ST
216-10ST
56383
56387
56402
56411
Catalog
Number
IBCA
Number
“Tuffy” Angle
114-4B
114-6B
“Tuffy” Angle-solder
115-8S
4
55923
X
1
3
⁄4
⁄8
1
⁄2
5
⁄8
⁄4
⁄8
1
⁄2
5
⁄8
X
1
3
3
ODS
⁄4
⁄8
1
⁄2
5
⁄8
X
1
⁄4
⁄8
1
⁄2
5
⁄8
0.75
0.75
1.25
1.25
Outlet
Weight
(Pounds)
3
Size (Inches)
Inlet
X
1
ODS
1
⁄2
SAE
1
⁄4
1
⁄4
3
X
0.50
0.50
1.00
1.00
ODS
1
⁄4
3
⁄8
1
⁄2
5
⁄8
0.50
0.50
1.00
1.00
ODS
1
⁄4
⁄8
1
⁄2
5
⁄8
Weight
(Pounds)
SAE
3
NPT
55906
55909
Outlet
1
ODS
“Tuffy” w/Tube Exts.
“Tuffy”Angle Valves
Size (Inches)
Inlet
SAE
“Tuffy” Standard
214-4S
214-6S
215-8S
216-10S
Vacuum Applications
All Superior packless valves are excellent for
vacuum service. 5⁄8" and smaller are regularly
used for vacuums to 1 micron and the larger
sizes are adequate for 10 microns.
⁄4
⁄8
0.50
0.50
ODS
1
⁄2
1.00
Working Pressure: 1⁄4" thru 7⁄8": 500 psig
1
Working Pressure: 1- ⁄8": 375 psig
Body Construction: Forged Brass
Seat Material: Nylon
Diaphgram Construction: Stainless Steel
Minimum Temperature: -40°F
Valves may be installed without disassembly. Wrap body with damp cloth or
other suitable heat sinking material
during soldering.
Maximum Temperature: 275°F
Catalog
Number
Mounting Flange
F
G
(Hole
Size)
D
E
F
C
B
B
All “Tuffy” Valves are suitable for use with
R11, R12, R22, R123, R125, R134A,
R402A, R402B, R404A, R500, R502,
R507, and industrial oxygen usage. For
gases and liquids not listed, please
consult factory.
U.L. and C-UL Listed File No. SA3462(N)
A
214-4
214-6
215-8
216-10
214-4S
214-6S
215-8S
216-10S
214-4ST
214-6ST
215-8ST
216-10ST
Dimensions (Inches)
A
3
2 ⁄4
23⁄4
35⁄8
37⁄8
23⁄4
23⁄4
35⁄8
37⁄8
6
57⁄8
69⁄16
75⁄16
B
—
—
—
—
5
⁄16
7
⁄16
9
⁄16
21
⁄32
5
⁄16
7
⁄16
9
⁄16
21
⁄32
C
19
⁄32
⁄32
13
⁄16
13
⁄16
19
⁄32
19
⁄32
13
⁄16
13
⁄16
19
⁄32
19
⁄32
13
⁄16
13
⁄16
19
G
CV
⁄4
⁄4
7
⁄8
7
⁄8
3
⁄4
3
⁄4
7
⁄8
7
⁄8
3
⁄4
3
⁄4
7
⁄8
7
⁄8
0.199
0.199
0.199
0.199
0.199
0.199
0.199
0.199
0.199
0.199
0.199
0.199
N/A
0.882
1.788
2.828
N/A
0.882
1.788
2.828
N/A
0.882
1.788
2.828
D
E
F
29
1
3
1 ⁄32
129⁄32
29⁄16
29⁄16
129⁄32
129⁄32
29⁄16
29⁄16
129⁄32
129⁄32
29⁄16
29⁄16
2 ⁄2
21⁄2
33⁄8
33⁄8
21⁄2
21⁄2
33⁄8
33⁄8
21⁄2
21⁄2
33⁄8
33⁄8
3
214 With Tube Extensions
B
B
A
“Tuffy” Angle Valves
D
Dimensions (Inches)
Catalog
Number
A
B
C
D
E
F
G
CV
114-4B
114-6B
115-8S
113⁄32
113⁄32
113⁄16
—
—
9
⁄16
11⁄4
11⁄4
13⁄8
117⁄32
117⁄32
2
225⁄32
225⁄32
33⁄8
—
—
—
—
—
—
N/A
0.450
2.542
E
C
B
B
A
5
“Tuffy” X2 Line Valve with
“Sealzall” Moisture Seal
“Sealzall” positive moisture seal prevents
condensation from seeping down between
the valve stem and bonnet and eliminates
valve “freeze-up.” Made of resilient Teflon,
the “Sealzall” moisture barrier is firmly sealed
into the valve bonnet. It will not turn with the
opening and closing of the valve, and will
remain in position to provide a permanent
moisture barrier.
Catalog
Number
“Tuffy” X2 Line Valve with “Sealzall” Moisture Seal
IBCA
Number
Size (Inches)
Inlet
SAE
214X2-4
X2
56389
X2
214X2
1
56390
56392
3
SAE
1
⁄4
X
⁄4
0.50
ODS
1
⁄4
⁄8
3
⁄4
⁄8
0.50
0.50
214X2S
“Tuffy” X2 Line Valve with “Sealzall” Moisture Seal
Catalog
Number
Mounting Flange
214X2-4
214X2-4S
214X2-6S
F
D
F
C
B
214X2
Enlarged View of
Moisture Barrier
6
X
ODS
214X2-4S
214X2-6S
G
(Hole
Size)
1
Weight
(Pounds)
Outlet
B
A
E
Dimensions (Inches)
A
3
2 ⁄4
23⁄4
23⁄4
B
—
⁄16
7
⁄16
5
C
19
⁄32
⁄32
19
⁄32
19
D
E
F
29
1
3
1 ⁄32
129⁄32
129⁄32
2 ⁄2
21⁄2
21⁄2
⁄4
⁄4
3
⁄4
3
G
CV
0.199 N/A
0.199 N/A
0.199 0.882
“Tuffy” Purge and Drain Valves
Catalog
Number
IBCA
Number
“Tuffy” Purge and Drain
234A-4
234A-6
“Tuffy” Charging Valves
Catalog
Number
56438
56439
IBCA
Number
“Tuffy” Charging Valves
216X7-10S
56416
Size (Inches)
Inlet
ODS
1
3
Outlet
X
SAE
1
⁄4
⁄8
⁄4
⁄8
0.50
0.50
Outlet
Weight
(Pounds)
3
Size (Inches)
Inlet
ODS
5
⁄8
X
Weight
(Pounds)
ODS
5
⁄8
1.00
7
Diaphragm Packless Globe Valves
A low pressure drop is available in the 217
series forged brass diaphragm packless
globe valves. The nylon seated stem
assembly is inclined to provide
maximum flow and minimum pressure drop.
With this compact design, many headroom
problems are eliminated.
“Tuffy” Purge and Drain Valves
Mounting Flange
F
G
(Hole
Size)
Dimensions (Inches)
Catalog
Number
A
234A-4
234A-6
23⁄4
23⁄4
B
5
7
⁄16
⁄16
C
19
⁄32
⁄32
19
D
E
129⁄32
129⁄32
21⁄2
21⁄2
F
3
3
⁄4
⁄4
G
CV
0.199 N/A
0.199 0.882
D E
F
C
B
A
Catalog
Number
Mounting Flange
Dimensions (Inches)
A
B
C
D
E
29⁄16
33⁄8
F
G
C
V
ODS X ODS
F
G
(Hole
Size)
216X7-10S
D
F
C
B
B
A
8
E
35⁄8
11
⁄16
13
⁄16
7
⁄8
0.199 2.828
Diaphragm Packless Globe Valves
Catalog
Number
IBCA
Number
Size (Inches)
Inlet
Outlet
FPT
217-N
3
56419
X
217-14S
Diaphgram Packless Globe Valves
Mounting Flange
G
(Hole
Size)
7
56421
FPT
3
⁄4
ODS
Weight
(Pounds)
X
⁄4
2.25
ODS
7
⁄8
⁄8
1.75
Dimensions (Inches)
Catalog
Number
A
217-N
217-14S
313⁄16
313⁄16
B
3
⁄4
⁄16
15
C
13
⁄16
⁄16
13
D
E
3
3
313⁄16
313⁄16
F
G
11⁄8 0.199
11⁄8 0.199
CV
6.81
6.87
F
D
F
E
C
B
B
A
9
LPD* Globe Valves
Globe and Angle Valves
The LPD Globe Valves present to the industry a concept in forged brass valves in sizes
7
⁄8" through 3-5⁄8" which streamlines flow and
minimizes pressure drop in an extremely
compact design. Inclining the seat to a 70°
angle minimizes turbulence and streamlines
flow to help obtain the maximum capacity of
modern, high performance refrigeration and
air-conditioning systems.
The “C” series with special non-metallic bonnet gaskets and Teflon seat inserts permit
the use of these valves in service temperatures as high as 400°F. Bolted bonnets,
which are loosely assembled after factory
testing, permit easy disassembly for soldering. Metal-to-metal alignment assures a
perfect seal when bonnet is bolted.
A metal-to-metal back seat, when valve is
fully open, permits repacking under pressure. A full floating swivel type seat holder
and a durable Teflon seat insert assure long
life and positive shut-off. The LPD Angle
Valves are forged brass construction, and
parts are interchangeable with comparable
sizes of LPD globe line valves.
*LPD - Lowest pressure drop consistent with
compact size.
LPD Globe Valves
290C Series
LPD Globe Angle Valves
190C Series
10
Catalog
Number
IBCA
Number
Size (Inches)
290C-14S
291C-11S
292C-13S
293C-15S
294C-21S
295C-25S
296C-31S
297C-35S
56461
56462
56463
56464
56465
56466
56467
56468
⁄8
1 ⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
Catalog
Number
IBCA
Number
Inlet
190C-14S
191C-11S
192C-13S
193C-15S
56362
56363
56364
56365
Inlet
Outlet
7
7
1
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
3.25
3.50
7.00
7.25
14.25
32.00
32.25
37.7
Outlet
Weight
(Pounds)
Size (Inches)
7
⁄8
1 ⁄8
13⁄8
15⁄8
1
Weight
(Pounds)
7
⁄8
11⁄8
13⁄8
15⁄8
2.75
2.75
6.00
5.25
LPD* Globe Valves
Globe and Angle Valves
Working Pressure: 500 psig
Recommended Bolt Torque for
Re-assembly: See Column “E”
Body Construction: Forged Brass or
Brass and Copper
Metal-to-Metal Back Seat When
Fully Open
Seat Material: Teflon
Globe Valves Are Suitable For Use With
R-12, R-22, R-500, R-502, R-134A, R123, R-125, R404A, R402B, and R402A.
For Gases And Liquids Not Listed,
Please Consult Factory.
Can Repack Under Pressure
*LPD - Lowest pressure drop consistent with
compact size.
LPD Globe Valves
290C Series
Catalog
Number
D
290C-14S
291C-11S
292C-13S
293C-15S
294C-21S
295C-25S
296C-31S
297C-35S
Dimensions (Inches)
A
113⁄16
111⁄16
25⁄8
25⁄8
33⁄8
51⁄8
51⁄8
51⁄8
B
15
⁄16
1
11⁄16
11⁄16
11⁄2
17⁄8
17⁄8
17⁄8
D
E
(ft. lbs.)
51⁄4
51⁄4
71⁄16
71⁄16
8
10
10
10
12
12
30
30
50
70
70
70
10.60
12.36
21.67
23.63
42.00
82.30
91.30
91.00
C
D
E
(ft. lbs.)
CV
141⁄64
141⁄64
2
2
59⁄16
59⁄16
711⁄32
711⁄32
12
12
30
30
—
15.15
—
—
C
31
⁄32
31
⁄32
15⁄16
15⁄16
111⁄16
21⁄8
21⁄8
21⁄8
CV
C
B
A
B
LPD Globe Angle Valves
190C Series
Catalog
Number
190C-14S
191C-11S
192C-13S
193C-15S
Dimensions (Inches)
A
1
⁄16
15⁄16
15⁄16
15
B
15
⁄16
1
11⁄16
11⁄16
D
C
B
A
B
11
H-V Check Valves
Horizontal or Vertical Installation
H-V Globe Check Valves
Globe check valves feature the time proven
piston construction simplified for easy
reassembly after soldering. The improved “C”
series with special non-metallic bonnet gaskets
and Teflon seat inserts permit the use of these
valves in service temperatures as high as
400°F.
All H-V globe check valves are of all forged
brass construction in the low pressure drop “Y”
type design. Complete back pressure shutoff
is achieved at low pressure. The angle style is
forged brass or brass and copper construction,
and parts are interchangeable with comparable
size of line type.
Note: Bolted bonnets are loosely assembled
after testing to allow easy disassembly for
soldering.
Line Check Valves
Catalog
Number
IBCA
Number
Size (Inches)
ODS X ODS
Weight
(Pounds)
805C-14S
806C-11S
807C-13S
808C-15S
809C-21S
884C-25S
885C-31S
886C-35S
57348
57352
57336
57360
57364
57371
57372
57373
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
2.50
2.50
5.00
5.00
12.75
32.25
32.25
37.00
Catalog
Number
IBCA
Number
Line Valve Type
Angle Check Valves
Size (Inches)
ODS X ODS
Tube
Extensions
Weight
(Pounds)
No*
No*
No*
No*
2.00
2.00
3.75
3.75
Angle Valve Type
185C-14S
186C-11S
187C-13S
188C-15S
56355
56356
56358
56359
7
⁄8
11⁄8
13⁄8
15⁄8
*Note: Can be supplied with tube extensions on special order for soldering into the line
without disassembly.
12
H-V Check Valves
Working Pressure: Up to 500 psig
Time Proven Piston Construction
Construction: All Forged Brass
Special Non-Metallic Bonnet Gasket
Service Temperature Up to 400°F
Low Pressure Drop “Y” Design
Complete Back-Pressure Shut-Off at
Low Pressure Differential
Can Be Supplied With Tube Extensions,
Thus Eliminating Disassembly
For Gases and Liquids Not Listed,
U.L. and C-UL Recognized 805C Through
809C, File No. SA2989(N).
Spare Parts List, pgs, 64-65
Recommended Bolt Torque for
Re-assembly, see Column “E”
All Superior Check Valves are Suitable for
Use With R11, R12, R22, R123, R125,
R134A, R402A, R402B, R404A, R500,
R502, and R507
Suitable for Many Applications Such as
Hot Gas Defrost
1/2 lb. Differential Spring
For Special Higher Differential Springs For
All Check Valves, Please Consult Factory
Install in Any Position But Upside Down
Line Check Valves
Catalog
Number
D
805C-14S
806C-11S
807C-13S
808C-15S
809C-21S
884C-25S
885C-31S
886C-35S
Dimensions (Inches)
Size
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
A
113⁄16
111⁄16
25⁄8
25⁄8
33⁄8
51⁄8
51⁄8
51⁄8
B
15
⁄16
1
11⁄16
11⁄16
11⁄2
17⁄8
17⁄8
178
D
E
(ft. lb.)
CV
319⁄32
319⁄32
49⁄16
49⁄16
57⁄8
73⁄4
73⁄4
73⁄4
12
12
30
30
50
70
70
70
10.60
12.36
21.67
23.63
42.00
82.30
91.30
91.00
E
(ft. lb.)
C
12
12
30
30
—
15.15
—
—
C
31
⁄32
31
⁄32
15⁄16
15⁄16
111⁄16
21⁄8
21⁄8
21⁄8
C
B
A
B
Angle Check Valves
Catalog
Number
185C-14S
186C-11S
187C-13S
188C-15S
Dimensions (Inches)
Size
7
⁄8
11⁄8
13⁄8
15⁄8
A
1
15
⁄16
15⁄16
15⁄16
B
15
⁄16
1
11⁄16
11⁄16
C
D
41
43
1 ⁄64
141⁄64
2
2
3 ⁄64
343⁄64
47⁄16
47⁄16
V
D
C
B
A
B
13
H-V Check Valves
Type 802B Check Valves Series
(Patent 3,438,391)
This “Y” type of valve for years has been the
most popular design in the refrigeration
industry. The internal parts can easily be
removed and reassembled after soldering.
This basic “Y” type design reduces pressure
drop to a very low level.
The Teflon seat insert rapidly conforms to the
cone type of seating surface in the body. This
Type 802B Check Valve Series
insures positive shut-off characteristics.
This valve minimizes leakage even at the lowest back pressure. A specially designed secondary seat backs up the primary seat, after
approximately 10,000 cycles of operation the
secondary seat becomes effective. This is
done to insure even better shut-off characteristics as the valve wears into service.
Upon reassembly of the valve, positive shut-off
Catalog
Number
IBCA
Number
between the body cap and the body is assured
by means of a special gasket seal.
All Superior check valves have Teflon seats.
These valves may be installed in any position,
except upside down. U. L. and C-UL recognized 1⁄4" through 21⁄8".
Size
(Inches)
Weight
(Pounds)
Flare X Flare
ODS X ODS Tube Extensions*
802B-4
802B-6
802B-8
ODS X ODS
57328
57331
57334
1
⁄4
⁄8
1
⁄2
0.50
0.50
0.50
802B-4S
802B-6S
802B-8S
803B-10S
804A-14S
57329
57332
57335
57340
57344
1
⁄4
⁄8
1
⁄2
5
⁄8
7
⁄8
0.50
0.50
0.50
0.50
1.00
Catalog
Number
IBCA
Number
Size
(Inches)
Weight
(Pounds)
802B-4ST
802B-6ST
802B-8ST
803B-10ST
804A-14ST
57330
57333
57336
57341
57345
3
3
1
⁄4
⁄8
1
⁄2
5
⁄8
7
⁄8
3
0.50
0.50
0.75
0.75
1.00
*Tube extensions permit valve to be silver soldered directly to line without disassembly.
14
H-V Check Valves
Working Pressure: Up to 500 psig
Copper Gasket Between Body Cap and
Body Assures Positive Shut-off
Construction: All Forged Brass
Specially Designed Secondary Seat
Backs Up Primary Seat
Tube Extensions Permit Valve to be
Soldered Without Disassembly
For Gases and Liquids Not Listed,
All U.L. and C-UL Recognized, File
No. SA2989(N).
Patent No. 3,438,391
Suitable for Many Applications Such as
Hot Gas Defrost
All Superior Check Valves are Suitable for
Use With R11, R12, R22, R123, R125,
R134A, R402A, R402B, R404A, R500,
R502, and R507
Low Pressure Drop “Y” Design
Recommended Bonnet Torque:
802/803 35 ft. lbs.
804
65 ft. lbs.
Catalog
Number
For Special Higher Differential Springs For
All Check Valves, Please Consult Factory
Dimensions (Inches)
Size
A
B
C
D
C
V
Flare X Flare
802B-4
802B-6
802B-8
D
1
⁄4
⁄8
1
⁄2
2
13⁄4
11⁄2
1
⁄2
⁄8
3
⁄4
15
5
15
⁄32
⁄32
15
⁄32
21⁄16
21⁄16
21⁄16
N/A
1.75
3.2
1
23⁄8
21⁄8
17⁄8
2
21⁄4
5
15
21⁄16
21⁄16
21⁄16
21⁄16
29⁄16
N/A
1.75
3.2
3.8
8.5
3
ODS X ODS
C
A
B
802B-4S
802B-6S
802B-8S
803B-10S
804A-14S
B
Catalog
Number
D
802B-4ST
802B-6ST
802B-8ST
803B-10ST
804A-14ST
⁄4
⁄8
1
⁄2
5
⁄8
7
⁄8
3
⁄16
⁄16
9
⁄16
21
⁄32
3
⁄4
7
⁄32
⁄32
15
⁄32
15
⁄32
19
⁄32
15
Dimensions (Inches)
Size
1
⁄4
3
⁄8
1
⁄2
5
⁄8
7
⁄8
A
55⁄8
53⁄8
53⁄16
513⁄16
61⁄4
B
5
⁄16
3
⁄8
3
⁄8
1
⁄2
3
⁄4
C
15
⁄32
15
⁄32
15
⁄32
15
⁄32
19
⁄32
D
21⁄16
21⁄16
21⁄16
21⁄16
29⁄16
C
V
N/A
1.75
3.2
3.8
8.5
C
B
A
B
15
900M Series
In-Line Check Valve
Copper connection sizes 1/4” through 7/8”.
Hermeticaly sealed spun copper body.
30 mesh screen to protect seat surface
from debris.
“Lapped” stainless steel disc and “lapped”
brass seat assembly.
Magnetic Actuation.
Arrow indicates direction of flow.
Minimal Pressure Drop.
U.L. and C-U.L. Recognized, File No.
SA2989(N)
Specifications
Catalog
Number
IBCA
Number
900M-4S
900M-6S
900M-8S
900M-10S
900M-12S
900M-14S
60401
60402
60403
60404
60405
60406
Nominal
Size
(in.)
1
⁄4
3
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
Approximate
Weight
(lbs)
Length
A
(in.)
0.20
0.20
0.50
0.50
0.80
0.80
4.00
4.00
5.00
5.00
7.00
7.00
Contact Factory for Information on Larger Sizes.
16
Dimensions
Cup/Depth Diameter
B
C
(in.)
(in.)
0.325
0.385
0.385
0.530
0.655
0.780
0.875
0.875
1.000
1.000
1.625
1.625
Strainer
Mesh
Maximum
Working
Pressure
Maximum
Working
Pressure
(kPa)
Burst
Pressure
(PSIG)
Cv
Leak Rate
ccm/sec
@ 60 psi
30
30
30
30
30
30
800
800
640
640
560
560
5516
5516
4413
4413
3861
3861
4000
4000
3200
3200
2800
2800
0.48
1.38
2.53
4.59
5.35
8.05
4.1 X 10-3
4.1 X 10-3
9.3 X 10-3
9.3 X 10-3
2.0 X 10-2
2.0 X 10-2
Liquid Indicators and Sight Glasses
Bull’s Eye Sight Glass
A sight glass for oil, liquid or gas.
Catalog
Number
IBCA
Number
6433*
6433-E
6433S-G
6433x1**
819
57241
57244
57245
57871
57366
Catalog
Number
IBCA
Number
50-10S
56899
NPT Size
(Inches)
Weight
(Pounds)
1
1
⁄2
⁄4
13⁄4
1
⁄2
11⁄4
⁄4
⁄4
3
⁄4
1
⁄4
.84
3
1
Connections
Overall
Length
⁄8 ˝ODS x 5⁄8 ˝ODS
47⁄8 ˝
5
Weight
(Pounds)
1
⁄4 ˝
**With Flow Indicator
**With Red Flow Indicator
17
®
Dual Pressure Relief Valve Assembly
Series 3155W
The Series 3155W Dual Pressure Relief
Valve Assembly is a next generation product
incorporating Superior’s proven
®
welded ball valve
technology to further safeguard your
system in the event of a pressure relief
valve discharge.
This product provides you with the ability to
maintain protection of your system with a
back up pressure relief valve while enabling
you to replace the other relief valve - all
without dropping system pressure!
®
The new line of
ball
valves employs the latest robotic welding
technology, and the valves have full size
ports for unrestricted flow. Every continuous
welded body joint is 100% factory tested to
ensure positive leak-free performance.
®
Dual Teflon ball seals surround a polished
brass ball at each end. A secondary seal
becomes effective if foreign material scores
the primary seal ... even unfavorable
conditions such as compressor burnout––
a Superior exclusive.
The Series 3155W Dual Pressure Relief
Valve Assembly is constructed using an all
forged brass body. High flow internals
maximize flow capacity, another Superior
exclusive. The stem and cap of the Series
3155W is located on the side of the valve to
provide easy access with a wrench. Our
time-tested seal cap design permits valve
operation without seal cap removal, and
stamped flow direction indicators on the seal
cap indicate pressurized port at a glance.
Catalog
Number
IBCA
Number
3155W-D
3155W-E
3155W-F
59526
60276
60277
Mechanical internal machined stops
ensure positive open or closed seal
position with only a 1⁄4 turn.
The Series 3155W incorporates a dual stem
seal design utilizing Teflon packing
compressed by an internal packing nut
forming the primary seal. The unique seal
cap design permits valve operation without
removal of the seal cap and uses Teflon
gaskets to provide a secondary seal –– a
third Superior exclusive. There are no
synthetic “O” rings.
US Patent No. 5,671,911
Size (Inches)
Inlet
Connection
(MPT)
Outlet
Connection
(FPT)
1
1
3
3
⁄2
⁄4
1
⁄2
⁄4
1
Ball Port
Diameter
Weight
(Pounds)
.563 (14.30 mm)
.75 (19.05 mm)
1.00 (25.40 mm)
1.5
3.2
6.9
Series 3155W
Seal Cap
18
Seal Cap
Exclusive Seal Cap design permits operation of valve
without removal. Markings on cap top designates at-a-glance
pressurized port.
®
Dual Pressure Relief Valve Assembly
Series 3155W
High flow internals for maximum flow
capacity. A Superior exclusive!
®
welded ball valve
design allows removal or replacement of
either relief valve while system is still
pressurized, without loss of charge!
Proven seal cap and stem design. No
synthetic O-ring seal. Cap design permits
valve operation without seal cap removal.
The male inlet connection allows for easy
installation onto receiver. No need for
male adapters!
Flow direction indicator on seal cap.
Mechanical internal machined stops
ensure positive open or closed seal
position. Full open or close with only a
1
⁄4 turn.
Dual Teflon ball seals at each end–
secondary seal becomes effective if
foreign material scores the primary seal.
Another Superior exclusive!
Every valve is 100% factory sealed and
leak tested.
Full refrigeration service temperature
range of -40˚F to +325˚F (-40˚C to
Catalog
Number
3155W-D
3155W-E
3155W-F
+163˚C). Design working pressure of 500
psig (34.47 bar).
All forged brass body and polished brass
ball.
U. L. and C-UL Listed. File No. 3462 (N)
®
All
ball valves are
suitable for use with R11, R12, R22,
R123, R125, R1342, R402A, R402B,
R404A, R500, R502, and R507. For gases
or liquids not listed, please consult factory.
US Patent No. 5,671,911
Dimensions (Inches)
C
D
CV Port
E
Outlet A
Outlet B
5.629
5.556
4.69 (119.12mm) 3.350 (85.09mm) 1.26 (31.93mm)
5.31 (134.87mm) 3.90 (99.06mm) 1.49 (37.85mm)
6.26 (159.0mm) 5.09 (129.29mm) 1.93 (49.02mm)
®
Series 3155W
Use 3155W-D with Superior Relief Valves
1
Catalog No. 3020
⁄2" MPTx5⁄8" SAE
1
Catalog No. 3220
⁄2" MPTx5⁄8" SAE Angle
Use 3155W-E with Superior Relief Valves
1
Catalog No. 3030
⁄2" NPTx1⁄2" FPT
3
Catalog No. 3045
⁄4" NPTx3⁄4" FPT
Use 3155W-F with Superior Relief Valves
Catalog No. 3060
1" NPTx1" FPT
Catalog No. 3060x1
1" NPTx11⁄4" FPT
Seal Cap
Seal Cap
Exclusive Seal Cap design permits operation of valve
without removal. Markings on cap top designates at-a-glance
pressurized port.
19
“A” Series
Contact factory for information on internal compressor relief valve, series 5700.
Superior offers the most complete range of
refrigeration relief valves in the industry. All
valves have been designed, constructed and
rated in accordance with ANSI/ASHRAE 15
Standard Safety Code for Mechanical
Refrigeration and the Canadian Standards
Association.
Each valve is stamped U.V./N.B. to indicate
National Board certifications as to capacities.
Certified National Board ratings are printed
on the next page.
Minimum setting for all relief valves listed is
150 psi. These “A” series pressure relief
valves are all Teflon seated, permitting their
use in applications of either high or low
temperatures where many times the conventional rubber seated valves are completely
unsatisfactory.
Catalog numbers indicate style and size of
relief valve only - customer must specify
pressure setting when ordering. Standard
settings are 235, 300, 350, 400, 425, and
450 psig; settings from 150 up to 450 psig
with certified discharge capacities are
available at a slight additional cost.
Note: Prior to installation or during pressure vessel testing, Superior pressure relief
valves should not be discharged. Any dirt in
the system may embed in the seat and
Atmospheric –
Type 3000A
Angle –
Type 3212A
Port
Diameter
Size (Inches)
Weight (lb.)
Inlet
Outlet
NPT
3000
3001
3002
3
⁄16
3
⁄16
3
⁄16
X
1
⁄8
1
⁄4
3
⁄8
Catalog
Number
Port
Diameter
SEAL
Catalog
Number
*
*
*
.25
.25
.25
*Atmospheric – No External Connection
Straight-thru –
Type 3012A
Size (Inches)
Weight (lb.)
Inlet
Outlet
NPT
3212
3214
3215
3216
3220
3
⁄16
3
⁄16
3
⁄16
9
⁄32
9
⁄32
X
1
SAE
3
⁄4
3
⁄8
3
⁄8
3
⁄8
1
⁄2
⁄8
⁄8
1
⁄2
1
⁄2
5
⁄8
3
.50
.50
.50
.75
.75
Female Connection –
Type 3030A/3060A
Catalog
Number
Port
Diameter
Size (Inches)
Weight (lb.)
Inlet
Outlet
NPT
3012
3014
3015
3016
3020
X
1
3
3
3
3
⁄16
⁄16
3
⁄16
9
⁄32
9
⁄32
⁄4
⁄8
3
⁄8
3
⁄8
1
⁄2
Catalog
Number
Port
Diameter
SAE
3
Note: For I.B.C.A. Numbers, Consult Factory
20
prevent the pressure relief valve from
resealing properly.
Important: A pressure relief valve is
installed in a refrigeration system primarily to
protect the receiver. Since it is not intended
to be an overload or high pressure cutout,
we recommend that the pressure relief valve
be set at the working pressure marked on
the receiver, regardless of the type of refrigerant used. The method for determining “set
pressure” is outlined in ANSI/ASHRAE 15
Standard Safety Code for Mechanical
Refrigeration, or write for Technical Bulletin
77-28:90.
⁄8
⁄8
1
⁄2
1
⁄2
5
⁄8
Size (Inches)
Weight (lb.)
Inlet
Outlet
NPT
.25
.25
.25
.50
.50
3030
3045
3060
3075
7
⁄16
⁄16
23
⁄32
23
⁄32
7
1
⁄2
⁄4
1
1 1⁄ 4
3
X
FPT
1
⁄2
⁄4
1
1 1⁄ 4
3
.75
.75
2.50
2.75
“A” Series
Contact factory for pressure settings above 500 psi.
Minimum Setting: 150 psig
Body Construction: Brass
Seat Material: 100% Teflon
Spring Material: Stainless Steel
Initial Leak: Set Pressure ±3%
Full Discharge: Initial Leak +10%
Reseat: By 80% of Set Pressure
ASME Certificate No.: 16,619
Canadian Registration No.:
0G1043.5
C.S.A. File No.: LR32768
N.B. Certificate Nos.
3000A Series M54009
3020A Series M54010
3030A Series M54021
3060A Series M54032
Discharge capacities shown in pounds air per minute.
To convert pounds air per minute to standard cubic feet per minute multiply by 13.1.
Atmospheric –
Type 3000A
Pressure
Setting
Discharge Capacity
3000, 3001, 3002
235
300
350
400
425
450
Catalog
Number
A
Straight-thru –
Type 3012A
235
300
350
400
425
450
Catalog
Number
3012
3014
3015
3016
3020
Pressure
Setting
235
300
350
400
425
450
B
Dimensions (Inches)
A
Catalog
Number
25⁄64
219⁄64
213⁄64
3000
3001
3002
Pressure
Setting
A
8.1
10.2
11.8
13.5
14.3
15.1
Angle –
Type 3212A
A
Discharge Capacity
3012, 3014,
3016,
3015
3020
8.1
10.2
11.8
13.5
14.3
15.1
Female Connection –
Type 3030A/3060A
16.1
20.3
23.6
26.8
28.4
30.1
Dimensions (Inches)
A
263⁄64
263⁄64
37⁄64
39⁄32
31⁄2
A
Discharge Capacity
3212, 3214,
3216,
3215
3220
8.1
10.2
11.8
13.5
14.3
15.1
16.1
20.3
23.6
26.8
28.4
30.1
Dimensions (Inches)
A
B
59
13
3212
3214
3215
3216
3220
2 ⁄64
259⁄64
259⁄64
221⁄32
227⁄32
Pressure
Setting
Discharge Capacity
3030,
3060,
3045
3075
235
300
350
400
425
450
36.9
46.6
54.0
61.4
65.1
68.8
Catalog
Number
3030
3045
3060
3075
1 ⁄32
113⁄32
113⁄32
11⁄2
15⁄8
88.0
111.0
*
*
*
*
Dimensions (Inches)
A
11
3 ⁄16
4
47⁄8
51⁄8
*Consult Factory for pressure settings
above 300 psi.
21
Relief Valve Capacity Equations
To select a pressure relief valve it is necessary first to determine the
discharge capacity required to protect the refrigerant-containing vessel
under consideration. The ANSI/ASHRAE Standard 15 states that the
required discharge capacity of a pressure relief valve used on such a
vessel is directly proportional to the size of the vessel. Once the size
of the vessel to be protected is known, the required discharge capacity
of the pressure relief valve may then be determined by using the
following formula:
Flow capacities of Superior pressure relief valves are expressed in
either pounds of air per minute or standard cubic feet per minute. To
convert pounds of air per minute to standard cubic feet per minute,
multiply by 13.1.
To determine the pressure relief valve capacities at any pressure
setting between 150 and 450 psig, use the following formula:
C=fDL
Where
C=S(1.1P+14.7)
C = minimum required discharge capacity of the pressure
relief device in pounds of air per minute (kg/sec).
f = factor dependent upon type of refrigerant1.
(See Table 1 below)
D = outside diameter of vessel in feet (m).
L = length of vessel in ft (m).
Table 1
Refrigerant
Value of f
When used on the lowside of a limited-charge cascade system
(Value in parentheses is metric):
R-23, R-170, R-744, R-1150,
R-508A, R-508B
1.0(0.082)
R-13, R-13B1, R-503
2.0(0.163)
R-14
2.5(0.203)
Other applications:
R-718
0.2(0.016)
R-717
0.5(0.041)
R-11, R-32, R-113, R-123, R-142b
R-152a, R-290, R-600, R-600a, R-764
1.0(0.082)
R-12, R-22, R-114, R-124, R-134a,R-401A,
R-401B, R-401C, R-405A, R-406A, R-407C
R-407D, R-407E, R-409A, R-409B, R-411A,
R-411B, R-411C, R-412A, R-414A, R-414B,
R-500, R-1270
1.6(0.131)
R-143a, R-402B, R-403A,
R-407A, R-408A, R-413A
2.0(0.163)
R-115, R-402A, R-403B, R-404A, R-407B,
R-410A, R-410B, R-502, R-507A, R-509A
2.5(0.203)
C = Pressure relief valve capacity in pounds of
air per minute.
P = Pressure setting of relief valve in psig.
S = Pressure relief valve flow factor.
Value of “S” flow factor for each pressure relief valve series are given
in Table 2. Table 2 below gives the certified flow ratings in lbs air/min
for all of the pressure relief valve series at the standard pressure
settings.
Table 2
CERTIFIED FLOW RATINGS - for standard settings
Flow capacity as determined by the National Board of Boiler and
Pressure Vessel Inspectors in accordance with A.S.M.E. Code,
Section VIII, Division 1, and as required by ANSI/ASHRAE Standard
15: Safety Code For Mechanical Refrigeration.
Series
Flow Factor “S”
Catalog No.
Pressure
Setting
psig
1. These values are taken directly from ANSI/ASHRAE Standard 15-1994, Section 9.7.5 and
ANSI/ASHRAE 15c-2000, addendum to 15-1994.
22
Where
235
300
350
400
425
450
3000A
0.0296
3000 3015
3001 3212
3002 3214
3012 3215
3014
8.1
10.2
11.8
13.5
14.3
15.1
3020A
0.059
3016
3020
3216
3220
3030A
0.135
3030
3045
3060A
0.322
3060
3075
16.1
20.3
23.6
26.8
28.4
30.1
36.9
46.6
54.0
61.4
65.1
68.8
88.0
111.0
Packed Angle Valves
Packed line valves are designed for a
multitude of uses in refrigeration systems.
When installed properly, these handy, forged
brass, packed angle valves provide easy
accessibility, and serviceability for the refrigeration system. All packed angle valves are
provided with a brass seal cap.
The 605 series special receiver valve can
be furnished with or without copper tube
extensions. The tube extensions allow the
valve to be silver-soldered into the line without fear of harming the packing. Valves supplied with tube extensions are recommended
for liquid line use only.
Packed Angle Valves 600A Series
The 617A series charging and purging
valves are designed to be installed on the
branch or run of a solder-type tee. The valve
can be readily positioned for easy access.
These valves are shipped loosely assembled
for easy removal of parts prior to soldering.
Reassemble after installation with a standard
3
⁄8" square wrench.
Specialty packed angle valves are
designed specifically for the Refrigeration
Rack industry. The 600AX7-JB is designed
for use with the transducer, and offers connections to monitor and verify transducer
readings and pressures. The 600B-6U6 Oil
Leveler valve offers a 3⁄8" SAE flare swivel for
mounting on the oil leveler and a 3⁄8" SAE
side outlet for oil line connection. The
600B-4U4 SORIT or EPR Pilot Isolation
valve uses the same type of connections, in
1
⁄4" SAE, as the 600B-6U6. The valve is
designed for an inlet connection to the EPR
or SORIT valve, and the outlet to connect to
the pilot line of the suction header.
All Superior packed angle valves incorporate a special packing that has been developed for use with all refrigerants.
Catalog
Number
IBCA
Number
Size (Inches)
Bottom Inlet
Side Outlet
600A-4B
600A-4C
600A-6B
600A-6C
57094
57095
57099
57100
Catalog
Number
IBCA
Number
605-6D
605-8B
605-8C
605-8D
606B-10D*
57112
57113
57114
57115
57119
605-KB
57109
605-10S
57110
1
57134
3
NPT
Packed Angle Receiver Valves 605 Series
⁄4
3
⁄8
1
⁄4
3
⁄8
1
1
1
3
⁄4
⁄4
3
⁄8
3
⁄8
X
1
⁄2
1
⁄4
3
⁄8
1
⁄2
1
⁄2
NPT
1
X
NPT
Socket
for OD
Tubing
3
1
1
1
0.25
0.25
0.25
0.25
Weight
(Pounds)
⁄2
⁄4
3
⁄8
1
⁄2
1
⁄2
0.50
0.50
0.50
0.50
0.50
1
⁄4
0.50
FPT
1
X
⁄4
⁄8
1
⁄4
3
⁄8
SAE
⁄8
⁄2
1
⁄2
1
⁄2
5
⁄8
⁄4
Weight
(Pounds)
SAE
Size (Inches)
Bottom Inlet
Side Outlet
NPT
607-14S
X
1
Socket
for OD
Tubing
⁄4
ODS
⁄2
5
⁄8
5
⁄8
0.50
⁄4
7
⁄8
5
⁄8
1.25
*Special Request - Consult Factory for Minimum Lot Side and Availability.
23
Packed Angle Valves
Working Pressure: 500 psig
U.L. and C-UL Listed File No. SA3462(N)
Schrader Core on 600AX7-JB must be
removed prior to soldering.
All Packed Angle Valves are suitable for
use with R11, R12, R22, R123, R125,
R134A, R402A, R402B, R404A, R500,
R502, and R507. For gases and liquids
not listed, please consult factory.
Body Construction: Forged Brass
Seal Cap Construction: Brass with
Copper Gasket or Nylon Gasket
Packed Angle Valves 600A Series
Catalog
Number
600A-4B
600A-4C
600A-6B
600A-6C
A
Dimensions (Inches)
A
B
C
D
3
1
1
31⁄8
31⁄8
31⁄8
31⁄8
2 ⁄32
23⁄32
23⁄32
23⁄32
1 ⁄32
11⁄32
11⁄32
11⁄32
1 ⁄32
11⁄32
11⁄32
11⁄32
D
B
C
Packed Angle Receiver Valves 605 Series
Catalog
Number
A
D
605-6D
605-8B
605-8C
605-8D
605-10S
605-KB
607-14S
606B-10D†
Dimensions (Inches)
A
B
C
D
1
15
5
21
2 ⁄2
21⁄2
21⁄2
21⁄2
21⁄2
21⁄2
3
25⁄8
1 ⁄32
115⁄32
115⁄32
115⁄32
115⁄32
115⁄32
13⁄4
13⁄4
1 ⁄16
15⁄16
15⁄16
15⁄16
15⁄16
11⁄4
17⁄16
17⁄16
†Special Request - Consult Factory for Minimum Lot Side and Availability.
†Backseating Design
B
C
24
3 ⁄32
331⁄32
331⁄32
331⁄32
331⁄32
331⁄32
43⁄4
43⁄8
Packed Angle Valves
Packed Angle Charging
and Purging Valves - 617A Series
Catalog
Number
IBCA
Number
Size (Inches)
Bottom Inlet
Side Outlet
ODS
617A-4S4
617A-6S4
617A-6S6
617A-8S4
617A-8S6
617A-10S4
617A-10S6
Transducer Valve
Catalog
Number
57163
57164
57165
57166
57167
57161
57162
IBCA
Number
SAE
1
1
3
1
⁄4
⁄8
3
⁄8
1
⁄2
1
⁄2
5
⁄8
5
⁄8
1
⁄4
⁄4
3
⁄8
1
⁄4
3
⁄8
1
⁄4
3
⁄8
Size (Inches)
Outlet*
Inlet
NPT/ODS
600AX7-JB 57107
X
X
FPT
1
⁄4
Weight
(Pounds)
0.25
0.25
0.25
0.375
0.375
0.375
0.375
Weight
Outlet † (Pounds)
X
SAE
1
⁄8
⁄4
0.25
* 1⁄8" FPT Female Side Connection for Transducer Fitting Used to Monitor Pressure
† 1⁄4" SAE Flare Side Connection with Schrader Core for Manual Pressure Check with
Gauge to Verify Transducer Readings
Oil Leveler/SORIT or EPR
Pilot Isolation Valve
Catalog
Number
IBCA
Number
Size (Inches)
Bottom Inlet
Side Outlet
fSAE
600B-4U4
600B-6U6
59252
59253
1
3
⁄4
⁄8
X
Weight
(Pounds)
mSAE
1
3
⁄4
⁄8
0.375
0.375
25
Packed Angle Valves
Packed Angle Charging
and Purging Valves - 617A Series
Dimensions (Inches)
Catalog
Number
A
A
617A-4S4
617A-6S4
617A-6S6
617A-8S4
617A-8S6
617A-10S4
617A-10S6
A
B
3
1
2 ⁄32
23⁄32
23⁄32
23⁄32
23⁄32
23⁄32
23⁄32
C
D
31
1 ⁄32
11⁄32
11⁄32
11⁄32
11⁄32
11⁄32
11⁄32
31⁄8
31⁄8
31⁄8
31⁄8
31⁄8
31⁄8
31⁄8
⁄32
⁄32
13⁄32
31
⁄32
13⁄32
31
⁄32
13⁄32
31
B
C
Transducer Valve
Catalog
Number
600AX7-JB
Dimensions (Inches)
A
B
C
D
E
23⁄32
11⁄2
15⁄32
319⁄32
1
A
D
B
E
C
Oil Leveler/SORIT or EPR
Pilot Isolation Valve
Catalog
Number
600B-4U4
600B-6U6
A
D
B
E
C
26
Dimensions (Inches)
A
B
C
D
3
31
1
15
2 ⁄32
23⁄32
1 ⁄32
131⁄32
1 ⁄32
11⁄32
4 ⁄32
419⁄32
E
13
⁄32
⁄32
17
Straight Tube Heat Exchangers
Superheater II Features and Specifications
Superheater II straight tube heat
exchangers include a range of internal
straight fluted suction tubes from one to
eight.
Superheater II heat exchangers are
designed to permit a system engineer to
select a specific heat exchanger model to
provide a controlled amount of subcooling,
and/or superheat, for any given refrigerant.
Refer to Superior’s “Superheater II
Selection Guide” for selecting the proper
model series graph for the appropriate
refrigerant. The Selection/Performance
curves plot subcooling versus evaporator
capacity in BTUs per hour.
Call or write the factory for our selection
guide.
E
A - OD
F
B - ID
D
C
Features:
All Copper Construction
High Temperature Brazed Joints
U.L. Listed
Exclusive Heat Transfer Surface
Engineered for Subcooling Control
Selected Performance for Specific
Refrigerants
Catalog
Number
IBCA
Number
HXSV-1⁄2
HXSV-3⁄4
HXSV-1
HXSV-11⁄2
HXSV-2
HXSV-3
HXSV-5
HXSV-71⁄2
HXSV-10
HXSV-15
HXSV-20
51029
51098
51090
51091
51095
51097
51099
51100
51093
51094
51095
ODS
Connections
Liquid Suction
A
B
(in.)
(in.)
1
⁄4
⁄8
3
⁄8
3
⁄8
3
⁄8
1
⁄2
5
⁄8
5
⁄8
7
⁄8
7
⁄8
11⁄8
3
1
⁄2
⁄8
5
⁄8
7
⁄8
11⁄8
11⁄8
13⁄8
15⁄8
21⁄8
21⁄8
21⁄8
5
Nominal
Horsepower
1
⁄2
⁄4
1
11⁄2
2
3
5
71⁄2
10
15
20
3
Overall
Length
C
(in.)
Shell
Length
D
(in.)
E
(in.)
Shell
Diameter
F
(in.)
111⁄2
113⁄4
133⁄4
141⁄2
15
15
141⁄4
17
18
25
27
10
10
12
12
12
12
11
13
13
20
22
101⁄2
101⁄2
121⁄2
121⁄2
121⁄2
121⁄2
111⁄2
131⁄2
131⁄2
201⁄2
24
7
⁄8
11⁄8
11⁄8
13⁄8
15⁄8
15⁄8
21⁄8
21⁄8
25⁄8
25⁄8
25⁄8
G
(in.)
3
⁄4
⁄8
7
⁄8
11⁄4
11⁄2
11⁄2
15⁄8
2
21⁄2
21⁄2
21⁄2
7
Approximate
Weight
(lbs.)
3
⁄4
1
11⁄4
13⁄4
21⁄4
21⁄4
3
31⁄2
51⁄4
8
9
Suction
Tube O.D.
(in.)
5
⁄8
⁄8
7
⁄8
11⁄8
13⁄8
13⁄8
5
⁄8
5
⁄8
5
⁄8
5
⁄8
5
⁄8
7
Number
of Tubes
Suction
Gross Section
Area
(in.2)
1
1
1
1
1
1
5
5
8
8
8
0.233
0.484
0.484
0.825
1.26
1.26
1.165
1.165
1.864
1.864
1.864
Suction
Surface Liquid
Area Volume
(ft2)
(in.3)
0.135
0.190
0.229
0.294
0.360
0.360
0.675
0.810
1.30
2.05
2.30
1.77
2.24
2.68
3.19
3.54
3.54
17.12
20.23
30.10
46.31
46.83
27
Copper Filter-Driers
All Molecular Sieve Filter-Driers for Moisture and Acid Removal
A
SVM1
IBCA
Number
55072
Connection (Inches)
1
⁄4 OD (3⁄16 ID) X 0.089-0.092
Cap. Tube
Dimensions (Inches)
A
B
73⁄8
3
B
⁄4
FLOW
Catalog
Number
Includes access valve for charging and/or evacuating system.
Catalog
Number
IBCA
Number
SVM1C
55073
SVM2C
55075
Connection (Inches)
A
Dimensions (Inches)
A
B
B
FLOW
Catalog
Number
IBCA
Number
SVM1
SVM1C
SVM2C
55072
55073
55075
28
73⁄8
3
77⁄8
1
Refrigerant 12
Water Capacity in Drops
75°F
125°F
33.0
33.0
66.0
31.0
31.0
62.0
⁄4
SU
⁄4 OD (3⁄16 ID) X 0.089-0.092
Cap. Tube
1
⁄4 OD (3⁄16 ID) X 0.127-0.130
Cap. Tube
Refrigerant 22
Water Capacity in Drops
75°F
125°F
31.6
31.6
63.2
30.0
30.0
60.0
MO
FI
1
Recommended Nominal Tons
R-12
R-22
1
1
1
1
⁄3
⁄3
1
⁄2
⁄2
2
Filter and Drier Cartridges
For 43⁄4 Inch OD Steel Shells
Filter Cartridge Type FC-48
High Capacity Type HC-48 and
Char-Core® Type CD-48
Interchangeable with All Major
Manufacturers’ Cores
Super Pleated Filter Media Provides
More Filter Area of Tubular Filter Cores
and 50% More Than Other Manufacturers’
Pleated Cartridges.
Cores for Recycle/Recovery Equipment
Type RC-48 for 43⁄4" OD Steel Shell and
Type RC35 for Superior 3CFA Brass Shell
Interchangeable with All Major
Manufacturers’ Cores
Solid Cake Design Molded from Blend of
Activated Alumina and Molecular Sieve
Provides Micronic Filtration with Minimum
Pressure Drop.
Filters Solid Contaminants Down to
10 microns.
Molecular Sieve Content Provides Highest
Moisture Capacities Available.
Ultra High Filtering Capacity for Removal
of Solid Contaminants.
Ratings for FC-48, HC-48, and CD-48
Surface
Cartridge
Capacity Ratings (Drops of Water)
Catalog
IBCA
Area
Length
Weight
Volume
Number
Number
(sq. in.)
(Inches)
(Pounds)
(cu. in.)
75°F
125°F
75°F
125°F
75°F
125°F
FC-48
HC-48
CD-48
51066
51079
51042
150
66
66
51⁄2
51⁄2
51⁄2
N/A
48
48
—
990
1087
—
740
803
—
600
530
—
470
425
—
600
530
—
470
425
Surface
Cartridge
1
⁄2
11⁄2
11⁄2
R12 (15 ppm)
R22 (60 ppm)
R134a (60 ppm)
Ratings for RC-48 and RC35
Capacity Ratings (Drops of Water)
Catalog
IBCA
Area
Length
Weight
Volume
Number
Number
(sq. in.)
(Inches)
(Pounds)
(cu. in.)
75°F
R12 (15 ppm)
125°F
75°F
R22 (60 ppm)
125°F
75°F
R134a (60 ppm)
125°F
RC-48
RC35*
57671
57691
66
62
51⁄2
55⁄16
11⁄2
11⁄2
48
35
1596
1310
1190
970
1095
825
846
707
1040
909
840
718
*Charcoal Activated
29
Type CFA Uni-Form® Shell and Replaceable Cartridges
All-brass One-piece Shell
May be Silver Brazed for Permanent
Installation and Protection of System
Minimal Space Required for Installation
No Paint to Peel
No Rust or Corrosion
Single Cartridge Design
Access Valve (1⁄4-inch SAE) Readily
Permits Pressure Drop Readings
Corrosion Resistant Stainless Steel Bolts
Permit Easy Access for Changing of
Cartridges
No Welds or Solder Joints, No
Chance of Leaks!
You’ll Never Have to Cut it out Again . . .
A Permanent Lifetime Value at
Today’s Cost!
U.L. and C-UL Listed. File No. SA 2718 (N)
F
D
B
B
A-Laying Length
C
Shells Only - Cartridges Not Included
Includes
Cartridge
Nominal
Shell Dia.
E (in.)
A
(in.)
NO
NO
NO
NO
2
2
2
2
531⁄32
531⁄32
619⁄32
619⁄32
1
⁄2
⁄8
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
NO
NO
NO
NO
NO
NO
NO
3
3
3
3
3
3
3
63⁄4
63⁄4
63⁄4
71⁄16
73⁄16
73⁄8
75⁄8
3
56851
56852
56853
56854
56855
56856
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
NO
NO
NO
NO
NO
NO
4
4
4
4
4
4
73⁄8
73⁄8
79⁄16
73⁄4
8
87⁄32
56894
56895
56896
21⁄8
25⁄8
31⁄8
NO
NO
NO
5
5
5
83⁄4
87⁄8
89⁄16
Catalog
Number
IBCA
Number
2CFA-10S
2CFA-12S
2CFA-14S
2CFA-18S
56367
56368
56369
56370
3CFA-8S*
3CFA-10S*
3CFA-14S
3CFA-18S
3CFA-22S
3CFA-26S
3CFA-34S
56476
56470
56471
56472
56473
56474
56475
4CFA-14S*
4CFA-18S*
4CFA-22S
4CFA-26S
4CFA-34S
4CFA-42S
5CFA-34S
5CFA-42S
5CFA-50S
Conn.
ODS
(in.)
5
⁄8
⁄4
7
⁄8
11⁄8
3
1
5
B
(in.)
F
(in.)
C
(in.)
D
(in.)
Weight
(lb.)
4
4
4
4
77⁄8
77⁄8
81⁄2
81⁄2
2
2
25⁄8
25⁄8
61⁄2
61⁄2
61⁄2
61⁄2
45⁄8
45⁄8
45⁄8
45⁄8
45⁄8
45⁄8
45⁄8
95⁄16
95⁄16
95⁄16
95⁄8
93⁄4
10
103⁄16
215⁄16
215⁄16
215⁄16
31⁄4
33⁄8
39⁄16
313⁄16
9
9
9
91⁄4
91⁄4
91⁄2
93⁄4
⁄4
1
11⁄8
13⁄16
15⁄16
17⁄16
57⁄8
57⁄8
57⁄8
57⁄8
57⁄8
57⁄8
1017⁄32
1017⁄32
107⁄8
113⁄16
113⁄8
1117⁄32
317⁄32
33⁄4
37⁄8
41⁄16
45⁄16
47⁄16
141⁄2
141⁄2
141⁄2
141⁄2
143⁄4
151⁄4
15⁄16
17⁄16
113⁄16
71⁄4
71⁄4
71⁄4
121⁄2
1211⁄16
123⁄8
43⁄4
47⁄8
49⁄16
24
24
24
⁄2
⁄8
3
⁄4
1
5
⁄8
⁄2
3
⁄4
1
11⁄8
13⁄16
15⁄16
1
3
Replaceable Cartridges - Type F Filter
*Liquid Line Service Only
Catalog
Number
F25A
F35A
F45A
F55A
IBCA
Number
For
Shell
Number
Cartridge
OD
Cartridge
Length
(in.)
Filter Area
(in.2)
Standard
Package
Weight per
Package
(lb)
51071
51072
51073
51074
2CFA
3CFA
4CFA
5CFA
123⁄32
25⁄8
317⁄32
41⁄16
65⁄16
621⁄32
73⁄16
83⁄16
66
115
189
270
12
12
12
12
41⁄4
6
93⁄4
113⁄4
Replacement Flange Gaskets
Catalog
Number
IBCA
Number
For Shell
Number
AG2
AG3
AG4
AG5
51003
51004
51005
51006
2CFA
3CFA
4CFA
5CFA
30
Replaceable Cartridges - Type DF for Clean-up and Permanent Use
Catalog
Number
DF25A
DF35A
DF45A
DF55A
IBCA
Number
For
Shell
Number
Cartridge
OD
Cartridge
Length
(in.)
Filter Area
(in.2)
Standard
Package
Weight per
Package
(lb)
51053
51059
51060
51061
2CFA
3CFA
4CFA
5CFA
123⁄32
25⁄8
317⁄32
41⁄16
611⁄32
621⁄32
77⁄32
87⁄32
66
115
189
270
12
12
12
12
53⁄4
101⁄2
171⁄4
241⁄2
Type F Filter Cartridge
Rated in Accordance with ARI
Standard 730-86
Filter or Filter Plus Drier Should be
Changed when Pressure Drop Across
Cartridge Increases Significantly
Follow Compressor Manufacturer’s
Recommendations, or Request Superior’s
Clean-Up Bulletin
Type DF Filter-Drier Cartridge
Selection and Ratings of Suction Line Shells and Cartridges for R12, R22, R502
Maximum Tonnage Ratings
Catalog
Number
2CFA-10S
2CFA-12S
2CFA-14S
2CFA-18S
3CFA-14S
3CFA-18S
3CFA-22S
3CFA-26S
3CFA-34S
4CFA-22S
4CFA-26S
4CFA-34S
4CFA-42S
5CFA-34S
5CFA-42S
5CFA-50S
Conn.
ODS
(Inches)
0.625
0.750
0.875
1.125
0.875
1.125
1.375
1.625
2.125
1.375
1.625
2.125
2.625
2.125
2.625
3.125
Permanent
Filter
Cartridge
and
Surface
Area
Temporary
Clean-Up
Cartridge
and
Surface
Area
F25A
66 sq. in.
DF25A
66 sq. in.
F35A
115 sq. in.
DF35A
115 sq. in.
F45A
189 sq. in.
DF45A
189 sq. in.
F55A
270 sq. in.
DF55A
270 sq. in.
Evaporation Temperatures
-40°F
-20°F
Pressure Drop (psi)
0.5
0.5
0.5
1.0
0°F
20°F
40°F
1.0
1.0
1.5
1.5
1.5
2.0
2.0
2.0
3.0
3.0
Refrigerant Number
R22
R502 R12
R22
R502
R12
R22
R502
R12
R22
R502
R12
R22
R502
0.7
0.6
1.1
0.9
1.3
1.0
2.0
1.5
1.4
1.1
2.2
1.7
3.5
2.7
4.3
3.3
5.7
4.4
3.7
2.9
4.6
3.6
7.8
6.0
9.5
7.3
9.4
7.2
12.4 9.6
15.3 11.8
1.4
2.1
2.5
3.7
2.6
4.1
6.6
8.1
10.7
7.0
8.7
14.6
17.8
17.6
23.0
29.0
1.1
1.6
1.9
2.9
2.1
3.2
5.2
6.3
8.4
5.5
6.8
11.5
14.0
13.8
18.2
23.0
1.2
1.8
2.1
3.2
2.2
3.5
5.6
6.9
9.1
5.9
7.4
12.4
15.1
15.0
20.0
24.0
2.2
3.3
3.9
5.9
4.2
6.6
10.5
12.8
17.0
11.0
14.0
23.0
29.0
28.0
37.0
46.0
1.8
2.6
3.1
4.7
3.3
5.2
8.3
10.2
13.5
8.8
11.0
18.5
23.0
22.0
29.0
36.0
1.9
2.8
3.3
5.0
3.5
5.5
8.8
10.8
14.3
9.3
11.7
19.6
24.0
24.0
31.0
38.0
3.3
4.9
5.7
8.8
6.1
9.7
15.5
19.0
25.0
16.3
20.0
34.0
42.0
41.0
54.0
67.0
2.6
3.9
4.6
7.0
4.9
7.8
12.4
15.2
20.0
13.0
16.4
28.0
34.0
33.0
44.0
54.0
2.7
4.1
4.8
7.3
5.1
8.1
13.0
15.8
21.0
13.6
17.0
29.0
35.0
34.0
45.0
56.0
5.1
7.5
8.8
13.5
9.4
15.0
24.0
29.0
38.0
25.0
31.0
53.0
64.0
63.0
84.0
103.0
4.1
6.1
7.2
11.0
7.7
12.0
19.3
24.0
31.0
20.0
26.0
43.0
52.0
52.0
68.0
84.0
0.6
1.0
1.1
1.7
1.2
1.9
3.0
3.7
4.9
3.2
4.0
6.7
8.1
8.1
10.7
13.2
31
New Refrigerants R134A and R404A
Selection and Ratings of Suction Line Shells and Cartridges
Catalog
Number
2CFA-10S
2CFA-12S
2CFA-14S
2CFA-18S
3CFA-14S
3CFA-18S
3CFA-22S
3CFA-26S
3CFA-34S
4CFA-22S
4CFA-26S
4CFA-34S
4CFA-42S
5CFA-34S
5CFA-42S
5CFA-50S
Conn.
ODS
(Inches)
0.625
0.750
0.875
1.125
0.875
1.125
1.375
1.625
2.125
1.375
1.625
2.125
2.625
2.125
2.625
3.125
Permanent
Filter
Cartridge
and
Surface
Area
Temporary
Clean-up
Cartridge
and
Surface
Area
F25A
66 sq. in.
DF25A
66 sq. in.
F35A
115 sq. in.
DF35A
115 sq. in.
F45A
189 sq. in.
DF45A
189 sq. in.
F55A
270 sq. in.
DF55A
270 sq. in.
-40°F
-20°F
Pressure Drop (psi)
0.5
0.5
1.0
Refrigerant Number
R404A
R134A
R404A
0.6
0.8
1.0
1.5
1.1
1.7
2.7
3.3
4.4
2.8
3.6
6.0
7.3
7.2
9.5
11.8
0.7
1.0
1.2
1.8
1.3
2.0
3.2
3.9
5.2
3.4
4.3
7.1
8.7
8.6
11.4
14.2
0°F
20°F
40°F
1.0
1.5
1.5
2.0
2.0
3.0
R134A
R404A
R134A
R404A
R134A
R404A
1.3
1.9
2.3
3.5
2.5
3.9
6.2
7.6
10.0
6.5
8.2
13.7
16.7
16.5
21.8
27.2
1.8
2.7
3.2
4.9
3.4
5.4
8.7
10.6
14.0
9.1
11.4
19.2
23.4
23.1
30.5
38.0
2.1
3.2
3.7
5.7
4.0
6.3
10.0
12.3
16.2
10.6
13.2
22.2
27.1
26.7
35.3
44.0
2.8
4.1
4.6
7.3
5.1
8.1
12.9
15.8
20.9
13.6
17.1
28.6
34.9
34.5
45.6
56.8
3.2
4.7
5.6
8.5
6.0
9.4
15.1
18.4
24.4
15.9
19.9
33.3
40.7
40.1
53.0
66.1
4.4
6.4
7.6
11.6
8.1
12.8
20.5
25.0
33.1
21.6
27.0
45.3
55.3
54.6
72.1
89.9
1.1
1.6
1.9
3.0
2.1
3.3
5.2
6.4
8.5
5.5
6.9
11.6
14.2
14.0
18.5
23.0
Selection and Ratings of Permanent Suction Line Filter-Driers-Shell and Cartridge Type for R12, R22, R502
Catalog
Number
2CFA-10S
2CFA-12S
2CFA-14S
2CFA-18S
3CFA-14S
3CFA-18S
3CFA-22S
3CFA-26S
3CFA-34S
4CFA-22S
4CFA-26S
4CFA-34S
4CFA-42S
5CFA-34S
5CFA-42S
5CFA-50S
32
Conn.
ODS
(Inches)
0.625
0.750
0.875
1.125
0.875
1.125
1.375
1.625
2.125
1.375
1.625
2.125
2.625
2.125
2.625
3.125
Permanent Filter
Plus Drier
Cartridge and
Surface Area
DF25A
66 sq. in.
DF35A
115 sq. in.
DF45A
189 sq. in.
DF55A
270 sq. in.
-40°F
-20°F
Pressure Drop (psi)
0.5
0.5
0.5
1.0
Refrigerant Number
R22
R502 R12
0.7
1.0
1.1
1.4
1.3
2.0
2.9
3.4
4.2
3.3
4.3
6.3
6.5
7.5
9.0
10.7
0.5
0.7
0.9
1.1
1.0
1.6
2.2
2.6
3.2
2.5
3.3
4.9
5.0
5.8
7.0
8.3
0.6
0.8
1.0
1.2
1.1
1.7
2.5
2.9
3.6
2.8
3.7
5.4
5.6
6.4
7.8
9.2
0°F
20°F
40°F
1.0
1.0
1.5
1.5
1.5
2.0
2.0
2.0
3.0
3.0
R22
R502
R12
R22
R502
R12
R22
R502
R12
R22
R502
1.3
1.8
2.1
2.7
2.5
3.8
5.4
6.3
7.8
6.1
8.1
11.8
12.2
14.0
17.0
20.0
1.0
1.4
1.6
2.1
1.9
3.0
4.2
5.0
6.1
4.8
6.3
9.3
9.5
11.0
13.3
15.8
1.1
1.5
1.8
2.3
2.1
3.2
4.6
5.4
6.7
5.2
6.9
10.0
10.3
12.0
14.4
17.1
2.0
2.9
3.3
4.3
3.9
6.0
8.6
10.0
12.5
9.8
12.8
18.8
19.3
22.0
27.0
32.0
1.6
2.3
2.6
3.4
3.1
4.8
6.8
8.0
9.9
7.8
10.2
14.9
15.4
17.8
22.0
25.0
1.7
2.4
2.8
3.6
3.3
5.1
7.3
8.4
10.5
8.2
10.8
15.8
16.3
18.8
23.0
27.0
3.0
4.2
4.9
6.3
5.8
8.9
12.7
14.8
18.3
14.4
19.0
28.0
29.0
33.0
40.0
47.0
2.4
3.4
3.9
5.1
4.6
7.1
10.2
12.0
14.7
11.5
15.2
22.0
23.0
27.0
32.0
38.0
2.5
3.5
4.1
5.3
4.8
7.4
10.6
12.3
15.3
12.0
15.7
23.0
24.0
28.0
33.0
39.0
4.6
6.5
7.5
9.7
8.9
13.6
19.5
23.0
28.0
22.0
29.0
43.0
44.0
51.0
61.0
72.0
3.8
5.3
6.1
7.9
7.2
11.1
15.9
18.5
23.0
18.0
24.0
35.0
36.0
41.0
50.0
59.0
Catalog
Number
2CFA-10S
2CFA-12S
2CFA-14S
2CFA-18S
3CFA-14S
3CFA-18S
3CFA-22S
3CFA-26S
3CFA-34S
4CFA-22S
4CFA-26S
4CFA-34S
4CFA-42S
5CFA-34S
5CFA-42S
5CFA-50S
Conn.
ODS
(Inches)
0.625
0.750
0.875
1.125
0.875
1.125
1.375
1.625
2.125
1.375
1.625
2.125
2.625
2.125
2.625
3.125
Permanent Filter
Plus Drier
Cartridge and
Surface Area
DF25A
66 sq. in.
DF35A
115 sq. in.
DF45A
189 sq. in.
DF55A
270 sq. in.
-40°F
-20°F
Pressure Drop (psi)
0.5
0.5
1.0
Refrigerant Number
R404A
R134A
R404A
0.5
0.7
0.9
1.1
1.0
1.5
2.2
2.6
3.2
2.5
3.3
4.8
5.0
5.7
6.9
8.2
0.6
0.9
1.0
1.3
1.2
1.9
2.6
3.1
3.8
3.0
3.9
5.8
5.9
6.9
8.3
9.8
1.0
1.4
1.7
2.1
2.0
3.0
4.3
5.0
6.2
4.9
6.4
9.4
9.6
11.2
13.5
16.0
0°F
20°F
40°F
1.0
1.5
1.5
2.0
2.0
3.0
R134A
R404A
R134A
R404A
R134A
R404A
1.2
1.7
2.0
2.5
2.3
3.6
5.1
5.9
7.3
5.9
7.6
11.1
11.4
13.2
15.9
18.8
1.7
2.4
2.7
3.5
3.2
5.0
7.1
8.3
10.3
8.0
10.6
15.5
15.9
18.4
22.3
26.4
1.9
2.7
3.2
4.1
3.7
5.8
8.2
9.6
11.9
9.3
12.2
17.9
18.4
21.4
25.8
30.5
2.5
3.5
4.1
5.3
4.8
7.4
10.6
12.4
15.3
12.0
15.8
23.1
23.8
27.6
33.3
39.4
2.9
4.1
4.8
6.2
5.6
8.6
12.4
14.4
17.8
14.0
18.4
26.9
27.7
32.1
38.7
45.9
4.0
5.6
6.5
8.4
7.6
11.0
16.8
19.6
24.3
19.0
25.0
36.6
37.7
43.6
52.7
62.4
33
New Refrigerant R507
Catalog
Number
2CFA-10S
2CFA-12S
2CFA-14S
2CFA-18S
3CFA-14S
3CFA-18S
3CFA-22S
3CFA-26S
3CFA-34S
4CFA-22S
4CFA-26S
4CFA-34S
4CFA-42S
5CFA-34S
5CFA-42S
5CFA-50S
Conn.
ODS
(Inches)
0.625
0.750
0.875
1.125
0.875
1.125
1.375
1.625
2.125
1.375
1.625
2.125
2.625
2.125
2.625
3.125
Permanent
Filter
Cartridge
and
Surface
Area
Temporary
Clean-Up
Cartridge
and
Surface
Area
F25A
66 sq. in.
DF25A
66 sq. in.
F35A
115 sq. in.
DF35A
115 sq. in.
F45A
189 sq. in.
DF45A
189 sq. in.
F55A
270 sq. in.
DF55A
270 sq. in.
-40°F
-20°F
Pressure Drop (psi)
0.5
1.0
Refrigerant Number
R507
R507
0.6
0.9
1.0
1.6
1.1
1.8
2.8
3.4
4.6
3.0
3.7
6.2
7.6
7.5
9.9
12.4
1.2
1.7
2.0
3.1
2.2
3.4
5.4
6.7
8.8
5.7
7.2
12.0
14.7
14.5
19.2
23.9
0°F
20°F
40°F
1.5
2.0
3.0
R507
R507
R507
1.9
2.8
3.3
5.0
3.5
5.6
8.9
10.9
14.4
9.4
11.7
19.7
24.0
23.7
31.3
39.1
2.9
4.2
5.0
7.6
5.3
8.4
13.4
16.4
21.7
14.1
17.7
29.7
36.2
35.8
47.2
58.9
4.5
6.6
7.8
11.9
8.3
13.2
21.1
25.7
34.1
22.2
27.8
46.6
56.9
56.2
74.2
92.4
New Refrigerant R507
Selection and Ratings of Suction Line Filter-Driers-Shell and Cartridge Type
Catalog
Number
2CFA-10S
2CFA-12S
2CFA-14S
2CFA-18S
3CFA-14S
3CFA-18S
3CFA-22S
3CFA-26S
3CFA-34S
4CFA-22S
4CFA-26S
4CFA-34S
4CFA-42S
5CFA-34S
5CFA-42S
5CFA-50S
34
Conn.
ODS
(Inches)
0.625
0.750
0.875
1.125
0.875
1.125
1.375
1.625
2.125
1.375
1.625
2.125
2.625
2.125
2.625
3.125
Permanent Filter plus Drier
Cartridge and Surface Area
Surface Area
DF25A
66 sq. in.
DF35A
115 sq. in.
DF45A
189 sq. in.
DF55A
270 sq. in.
-40°F
-20°F
Pressure Drop (psi)
0.5
1.0
Refrigerant Number
R507
R507
0.5
0.8
0.9
1.2
1.0
1.6
2.3
2.7
3.3
2.6
3.4
5.0
5.2
6.0
7.2
8.6
1.1
1.5
1.7
2.2
2.0
3.1
4.5
5.2
6.5
5.1
6.6
9.7
10.0
11.6
14.0
16.6
0°F
20°F
40°F
1.5
2.0
3.0
R507
R507
R507
1.7
2.4
2.8
3.6
3.3
5.1
7.3
8.5
10.5
8.3
10.9
15.9
16.4
19.0
22.9
27.1
2.6
3.7
4.3
5.5
5.0
7.7
11.0
12.8
15.9
12.5
16.4
24.0
24.7
28.6
34.5
40.9
4.1
5.8
6.7
8.6
7.8
12.1
17.3
20.1
25.0
19.6
25.7
37.6
38.7
44.9
54.2
64.1
A25, A35, A45, and A55 Temporary Acid Removal Suction Line Cores
For Temporary Installation in Place of “F” or “DF” Cartridges
The Acid Fighter is a temporary suction line
core specifically designed to give you
maximum acid removal performance in
situations where extremely high acid conditions exist. When used in conjunction with a
Superior DF filter drier cartridge, it gives you a
“knockout” combination.
Note: The DF cartridge is still satisfactory for
routine acid removal and system clean-up.
“Hot packaging” insures fully activated
cores for field installation. Each core is
individually packaged, as it comes from a
vacuum oven, in a special heat-sealed foil
bag to maintain the lowest residual
moisture obtainable.
Systems pressure drop is minimized
because of large, open mesh, single core
bonded construction, and large surface
area.
Features and Benefits of Acid Fighter Core
Fewer system pump downs required to
remove persistent acid condition.
Maximum core permeability is due to
uniformity of desiccant size and shape.
Fewer cores needed for system clean-up.
Added compressor protection, because of
a built-in double-mesh stainless steel
screen on the outlet side of the core.
Integral felt gaskets at each end of the core
cushions core against shock and eliminates
need for extra gaskets in the package.
High mechanical crush strength of the core
precludes powdering.
The ability to remove other foreign materials: sludges, solids, oil residues, moisture,
and other contaminants normally found in
air-conditioning and refrigeration systems.
More acid removal capability than other
comparable suction line cores. This results
from using a very special blend of fieldproven desiccants.
Ratings for Temporary Acid Removal Suction Line Cores - R12, R22, and R502*
(“Temporary” refers to use during clean-up procedure while ∆P is being monitored.)
Catalog
Number
A25
2CFA-10S
2CFA-12S
2CFA-14S
2CFA-18S
A35
3CFA-8S
3CFA-10S
3CFA-14S
3CFA-18S
3CFA-22S
3CFA-26S
3CFA-34S
A45
4CFA-14S
4CFA-18S
4CFA-22S
4CFA-26S
4CFA-34S
4CFA-42S
A55
Connection
ODS
(Inches)
Temporary
High Capacity
Acid Removal
Core, Surface
Area and
Dessicant
Volume
-40°F
-20°F
Pressure Drop (psi)
1.0
1.0
1.0
2.0
Refrigerant Number
R22 R502
R12
R22
0°F
20°F
40°F
2.0
2.0
3.0
3.0
3.0
4.0
4.0
6.0
8.0
8.0
R502
R12
R22
R502
R12
R22
R502
R12
R22
R502
2.13
3.00
3.68
4.79
2.28
3.22
3.95
5.13
3.92
5.53
6.79
8.82
3.17
4.47
5.49
7.13
4.09
5.77
7.09
9.21
IBCA 51008
0.625
0.750
0.875
1.125
35 sq. in
13 cu. in.
0.89
1.26
1.55
2.01
0.69
0.98
1.20
1.56
0.78
1.09
1.34
1.74
1.68
2.37
2.91
3.78
1.32
1.86
2.29
2.97
1.44
2.04
2.50
3.25
2.67
3.77
4.62
6.01
6.95 5.70
9.80 8.03
12.04 9.86
15.64 12.81
62 sq. in
35 cu. in.
0.61
0.89
1.52
2.24
2.97
3.64
4.92
0.47
0.69
1.17
1.73
2.30
2.82
3.81
0.53
0.78
1.31
1.94
2.57
3.16
4.26
1.14
1.68
2.85
4.20
5.58
6.84
9.24
0.90
1.32
2.24
3.30
4.38
5.37
7.26
0.98
1.44
2.45
3.61
4.79
5.88
7.94
1.81 1.44 1.55 2.66 2.15 2.78
2.67 2.13 2.28 3.92 3.17 4.09
4.53 3.61 3.87 6.65 5.38 6.94
6.67 5.32 5.70 9.80 7.92 10.23
8.87 7.06 7.57 13.03 10.53 13.60
10.87 8.66 9.28 15.97 12.90 16.67
14.68 11.70 12.54 21.57 17.43 22.51
4.72
6.95
11.79
17.37
23.08
28.29
38.22
3.86
5.70
9.66
14.24
18.92
23.19
31.32
93 sq. in
63 cu. in.
1.76
2.80
4.23
5.11
7.03
7.43
1.36
2.16
3.28
3.96
5.44
5.75
1.52
2.42
3.67
4.43
6.09
6.44
3.30 2.60
2.83
5.25 4.12
4.51
7.95 6.24
6.83
9.60 7.54
8.25
13.20 10.37 11.34
13.95 10.96 11.98
5.24
8.34
12.63
15.25
20.97
22.17
13.65
21.72
32.89
39.71
54.60
57.71
11.19
17.80
26.95
32.54
44.75
47.29
IBCA 51009
0.500
0.625
0.875
1.125
1.375
1.625
2.125
IBCA 51010
0.875
1.125
1.375
1.625
2.125
2.625
4.18
6.65
10.06
12.15
16.71
17.66
4.48
7.13
10.79
13.03
17.92
18.93
7.70
12.26
18.56
22.41
30.81
32.56
6.22
9.90
15.00
18.11
24.90
26.31
8.04
12.80
19.37
23.39
32.16
33.99
IBCA 51011
5CFA-34S
2.125
9.19
7.11 7.96 17.26 13.55 14.82 27.41 21.84 23.41 40.27 32.54 42.03 71.36 58.48
123 sq. in
5CFA-42S
2.625
11.03 8.53 9.55 20.71 16.26 17.78 32.89 26.21 28.10 48.32 39.05 50.44 85.63 70.17
90 cu. in.
5CFA-50S
3.125
12.58 9.73 10.89 23.62 18.54 20.28 37.52 29.89 32.05 55.11 44.54 57.53 97.67 80.04
*When actual pressure drop exceeds above recommended ∆P, replace “A” core with “DF” core within 15 minutes.
35
A25, A35, A45, and A55 Temporary Acid Removal Suction Line Cores
For Temporary Installation in Place of “F” or “DF” Cartridges
Ratings for Temporary Acid Removal Suction Line Cores.*
Catalog
Number
Connection
ODS
(Inches)
Temporary
High Capacity
Acid Removal
Core, Surface
Area and
Dessicant
Volume
-40°F
-20°F
Pressure Drop (psi)
1.0
1.0
2.0
Refrigerant Number
R404A
R134A
R404A
0°F
20°F
40°F
2.0
3.0
3.0
4.0
6.0
8.0
R134A
R404A
R134A
R404A
R134A
R404A
A25
2CFA-10S
2CFA-12S
2CFA-14S
2CFA-18S
0.625
0.750
0.875
1.125
35 sq. in
13 cu. in.
0.69
0.97
1.19
1.55
0.83
1.16
1.43
1.86
1.34
1.89
2.32
3.02
1.58
2.23
2.74
3.56
2.21
3.12
3.83
4.98
2.56
3.62
4.44
5.77
3.31
4.67
5.73
7.45
4.72
6.65
8.17
10.61
6.05
8.53
10.47
13.60
62 sq. in
35 cu. in.
0.47
0.69
1.17
1.72
2.29
2.81
3.79
0.56
0.83
1.40
2.06
2.74
3.36
4.54
0.91
1.34
2.27
3.35
4.45
5.46
7.37
1.07
1.58
2.68
3.96
5.26
6.44
8.70
1.50
2.21
3.75
5.53
7.35
9.01
12.17
1.74
2.56
4.35
6.41
8.52
10.44
14.10
2.25
3.31
5.61
8.27
10.99
13.47
16.20
3.20
4.72
8.00
11.79
15.66
19.20
25.94
4.10
6.05
10.26
15.11
20.08
24.61
33.25
93 sq. in
63 cu. in.
1.35
2.15
3.26
3.94
5.42
5.73
1.62
2.58
3.91
4.72
6.49
6.85
2.63
4.19
6.34
7.66
10.53
11.13
3.11
4.95
7.49
9.04
12.44
13.14
4.35
6.92
10.47
12.64
17.39
18.37
5.04
8.01
12.13
14.65
20.15
21.29
6.50
10.34
15.66
18.91
26.00
27.48
9.26
14.74
22.32
26.95
37.05
39.16
11.87
18.89
28.61
34.55
47.50
50.20
5CFA-34S
2.125
7.08
8.47
13.76
16.25
22.72
26.33
33.98
123 sq. in
5CFA-42S
2.625
8.50
10.17
16.51
19.50
27.26
31.59
40.77
90 cu. in.
5CFA-50S
3.125
9.69
11.60
18.83
22.24
31.10
36.03
46.50
48.42
58.10
66.27
62.07
74.49
84.96
A35
3CFA-8S
3CFA-10S
3CFA-14S
3CFA-18S
3CFA-22S
3CFA-26S
3CFA-34S
0.500
0.625
0.875
1.125
1.375
1.625
2.125
A45
4CFA-14S
4CFA-18S
4CFA-22S
4CFA-26S
4CFA-34S
4CFA-42S
0.875
1.125
1.375
1.625
2.125
2.625
A55
36
Ratings For New Refrigerant R507
Temporary Acid Removal Suction Line Cores*
Catalog
Number
Connection
ODS
(Inches)
A25
2CFA-10S
2CFA-12S
2CFA-14S
2CFA-18S
0.625
0.750
0.875
1.125
Temporary
High Capacity
Acid Removal
Core, Surface
Area and
Dessicant
Volume
-40°F
-20°F
Pressure Drop (psi)
1.0
1.0
2.0
Refrigerant Number
R507
R507
0°F
2.0
20°F
3.0
3.0
40°F
4.0
6.0
8.0
R507
R507
R507
35 sq. in
13 cu. in.
0.72
1.01
1.25
1.62
1.39
1.96
2.41
3.13
2.28
3.21
3.94
5.12
3.43
4.84
5.94
7.72
6.22
8.77
10.77
13.99
62 sq. in
35 cu. in.
0.49
0.72
1.22
1.80
2.39
2.93
3.96
0.94
1.39
2.36
3.48
4.62
5.67
7.66
1.54
2.28
3.86
5.69
7.56
9.27
12.52
2.33
3.43
5.82
8.58
11.40
13.97
18.87
4.22
6.22
10.55
15.55
20.65
25.32
34.20
0.875
1.125
1.375
1.625
2.125
2.625
93 sq. in
63 cu. in.
1.41
2.25
3.40
4.11
5.65
5.97
2.73
4.35
6.59
7.95
10.94
11.56
4.47
7.11
10.77
13.00
17.88
18.90
6.74
10.72
16.24
19.61
26.96
28.49
12.21
19.43
29.43
35.53
48.86
51.63
2.125
2.625
123 sq. in
90 cu. in.
7.39
8.87
14.29
17.15
23.37
28.04
35.23
42.27
63.85
76.62
A35
3CFA-8S
3CFA-10S
3CFA-14S
3CFA-18S
3CFA-22S
3CFA-26S
3CFA-34S
0.500
0.625
0.875
1.125
1.375
1.625
2.125
A45
4CFA-14S
4CFA-18S
4CFA-22S
4CFA-26S
4CFA-34S
4CFA-42S
A55
5CFA-34S
5CFA-42S
37
CD35, CD45, and CD55 Char-Core® Liquid Line Cores
Features and Benefits of Char-Core®
Liquid Line Cores
Wax build-up is prevented due to a high
percentage of activated charcoal
desiccant providing optimum wax
adsorption.
This special formulated blend gives
Char-Core® liquid line cores the ability to
remove not only wax, but virtually all other
contaminants found in air conditioning and
refrigeration systems.
Maximum core permeability due to
uniformity of desiccant size and shape.
System pressure drop is minimized (along
with the possibility of flash gas), because
of the large, open mesh, single core
bonded construction, and large surface
area.
“Hot packaging” prepares cores for field
installation. Each core is individually
packaged, as it comes from a vacuum
oven, in a special heat-sealed foil bag to
maintain total dryness.
High mechanical crush strength of the
new Char-Core® exceeds industry
minimum standards and precludes
powdering.
Added compressor protection with a
built-in double mesh stainless screen on
the outlet side of the core.
Integral felt gaskets at each end of the
Char-Core® cushions against shock and
eliminates need for extra gaskets in the
package.
Ratings for CD35 Liquid Line Char-Core®
R12
Catalog
Number
3CFA-8S
3CFA-10S
3CFA-14S
3CFA-18S
3CFA-22S
ODS
(Inches)
1
⁄2
⁄8
7
⁄8
11⁄8
13⁄8
5
Tons
Flow
1#∆P
8.0
12.2
13.0
20.4
23.9
Water Capacity
75°F
125°F
969
CD35 IBCA 51043
High Capacity, Replaceable for the
Removal of Wax, Moisture and Acids
from Refrigeration and Air Conditioning
Systems
65 sq. ins. of Filter Surface
35 cu. ins. of Desiccant
Water Capacities in Drops Based on
Equilibrium Point Dryness of:
15 ppm for R12, 60 ppm for R22,
and 30 ppm for R502
38
R22
841
Tons
Flow
1#∆P
10.5
16.0
17.0
26.8
31.4
R502
Water Capacity
75°F
125°F
884
862
Tons
Flow
1#∆P
7.1
10.7
11.4
18.0
21.1
Water Capacity
75°F
125°F
841
705
Tonnage Recommendations
Comm. and
Air
Low Temperature
Conditioning
R12
R22
R502
R12
R22
R502
5
71⁄2
10
15
18
71⁄2
10
12
18
20
5
71⁄2
10
12
15
71⁄2
10
12
18
20
8
12
15
20
25
6
10
11
15
20
CD35, CD45, and CD55 Char-Core® Liquid Line Cores
R12
Catalog
Number
4CFA-14S
4CFA-18S
4CFA-22S
4CFA-26S
4CFA-34S
ODS
(Inches)
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
Tons
Flow
1#∆P
20.4
29.4
35.9
48.3
64.5
R22
Water Capacity
75°F
125°F
1724
1496
Tons
Flow
1#∆P
26.9
38.6
47.2
63.5
84.8
R502
Water Capacity
75°F
125°F
1572
1534
Tons
Flow
1#∆P
18.0
25.9
31.7
42.6
57.0
Water Capacity
75°F
125°F
1496
1255
Comm. and
Air
Low Temperature
Conditioning
R12
R22
R502
R12
R22
R502
17
25
30
35
50
22
30
35
40
60
15
20
25
30
45
20
25
35
38
55
25
30
40
50
70
17
25
30
35
50
CD45 IBCA 51044
Systems
and 30 ppm for R502
R12
Catalog
Number
5CFA-18S*
5CFA-22S*
5CFA-26S*
5CFA-34S
5CFA-42S
ODS
(Inches)
Tons
Flow
1#∆P
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
46.9
70.9
80.1
91.4
92.3
R22
Water Capacity
75°F
125°F
2472
2145
Tons
Flow
1#∆P
61.7
93.3
105.3
120.2
120.9
R502
Water Capacity
75°F
125°F
2254
2200
Tons
Flow
1#∆P
41.4
62.7
70.7
80.7
81.3
Water Capacity
75°F
125°F
2145
1800
Comm. and
Air
Low Temperature
Conditioning
R12
R22
R502
R12
R22
R502
35
50
55
65
—
45
70
75
85
—
30
45
50
55
—
40
60
65
70
—
50
80
85
100
—
35
50
55
60
—
*Not Available Yet
CD55 IBCA 51045
Systems
and 30 ppm for R502
39
Service Tools
Sand Cloth
Catalog
Number
SCOM-180-5
SCWR-120-10
SCWR-120-25
CP-10
Abrasive Cleaning Pads
IBCA
Number
55064
55065
55066
51046
Description
Open Mesh Cloth, 180 Grit, Fully Waterproof, 11⁄2” Wide X 5 Yards
Sand Cloth, 120 Grit, Water Resistant, 11⁄2” Wide X 10 Yards
Sand Cloth, 120 Grit, Water Resistant, 11⁄2” Wide X 25 Yards
Cleaning Pad, 4” X 6”, 10 per container
Water Bubbler
Steady Stream
Non-Spurt Water Bubbler
This streamlined bubbler unit, fabricated
from a stainless steel forging and heavily
chromium plated, will enhance the appearance of any water cooler top or dispensing
basin. It will deliver an almost unvarying
outlet stream thru upstream pressure
changes of 7 to 150 pounds WITHOUT
ADJUSTMENT.
Its unique construction embodies a manual
push-button on-and-off valve, a regulator
and physical form and dimensions to meet
all sanitary codes in ONE UNIT.
Weight 11⁄8 lb.
40
Catalog
Number
IBCA
Number
7-800S
7-701S
7-42
7-10A
SN-2
58059
58061
57313
57312
55069
Description
Water Bubbler
Replacement Sealed Cartridge
Mounting Escutcheon
Gasket
Wrench
Flare Fittings
For sizes not shown, please consult factory.
All Superior fittings are machined from brass
forgings and relief annealed brass rod to
assure uniform density, maximum strength,
freedom from season cracking and total
absence of seepage leaks. All flare threads
are Unified and American Standard.
Fine Thread Series
All Superior fittings comply with the
American Standard ANSI-B-70.1, the Air
Conditioning and Refrigeration Institute
Standard No. 720-55, and the Society of
Automotive Engineers requirements for
refrigeration and marine tube fittings.
Flare Nuts
Flare Nuts (Continued)
N4
Forged Brass Long Nut
NST4, NSTR4
(“STA-TITE”) Flare Nut
Catalog
Number
N4-4
N4-6
N4-8
N4-10
N4-12
IBCA
Number
Std.
Pkg.
Size
(Inches)
Weight
(Pounds)
50129
50131
50132
50124
50125
10
10
5
2
2
F. Flare
1
⁄4
3
⁄8
1
⁄2
5
⁄8
3
⁄4
0.06
0.08
0.13
0.19
0.36
NS4
Forged Brass Short Nut
Catalog
Number
IBCA
Number
Forged Brass Short Nut
NST4-4
50113
NST4-6
50114
NST4-8
50115
NST4-10
50112
Forged Brass Reducing
Short Nut
NSTR4-86
50111
Std.
Pkg.
Size
(Inches)
F. Flare
1
⁄4
3
⁄8
1
⁄2
5
⁄8
SAE Flare x
Tube (O.D.)
1
25
⁄2 x 3 ⁄8
5
5
10
2
Weight
(Pounds)
0.04
0.06
0.08
0.12
0.10
Unions
U1
Male Flare x Male I.P.S.
NS4-3
NS4-4
NS4-5
NS4-6
NS4-8
NS4-10
NS4-12
NS4-14
50119
50120
50121
50122
50123
50116
50117
50118
10
25
10
25
25
10
5
2
F. Flare
3
⁄16
1
⁄4
5
⁄16
3
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
0.02
0.04
0.04
0.06
0.08
0.18
0.26
0.28
5
10
10
10
5
F. Flare to Tube
1
⁄4 x 3⁄16
3
⁄8 x 1⁄4
3
⁄8 x 5⁄16
1
⁄2 x 3⁄8
5
⁄8 x 1⁄2
0.04
0.06
0.06
0.10
0.13
NSR4
Forged Brass Short
Reducing Nut
NSR4-43
NSR4-64
NSR4-65
NSR4-86
NSR4-108
50104
50106
50107
50108
50101
U1-4A
U1-4B
U1-4C
U1-4D
U1-6A
U1-6B
U1-6C
U1-6D
U1-8B
U1-8C
U1-8D
U1-8E
U1-10B
U1-10C
U1-10D
U1-10E
U1-12D
U1-12E
50257
50258
50259
50260
50264
50265
50266
50267
50270
50271
50272
50273
50250
50251
50252
50253
50254
50255
25
25
10
10
10
10
10
10
5
10
10
5
5
5
10
5
2
2
Flare to npte
1
⁄4 x 1⁄8
1
⁄4 x 1⁄4
1
⁄4 x 3⁄8
1
⁄4 x 1⁄2
3
⁄8 x 1⁄8
3
⁄8 x 1⁄4
3
⁄8 x 3⁄8
3
⁄8 x 1⁄2
1
⁄2 x 1⁄4
1
⁄2 x 3⁄8
1
⁄2 x 1⁄2
1
⁄2 x 3⁄4
5
⁄8 x 1⁄4
5
⁄8 x 3⁄8
5
⁄8 x 1⁄2
5
⁄8 x 3⁄4
3
⁄4 x 1⁄2
3
⁄4 x 3⁄4
0.03
0.05
0.07
0.11
0.07
0.08
0.09
0.14
0.11
0.11
0.15
0.21
0.16
0.16
0.18
0.24
0.25
0.33
41
Flare Fittings
Unions (Continued)
Unions (Continued)
Elbows
U1X
Extra Heavy Flare to
Male Pipe Union
UR3
Female Flare x Male
Flare Adapter
E1
Male Flare x Male I.P.S.
Catalog
Number
U1X-4A
IBCA
Number
Std.
Pkg.
Size
(Inches)
Weight
(Pounds)
50274
2
Flare to npte
1
⁄4 x 1⁄8
0.04
U2
Double End Flare Union
U2-4
U2-5
U2-6
U2-8
U2-10
U2-12
50286
50287
50288
50289
50283
50284
25
10
25
10
10
2
Flare
1
⁄4
5
⁄16
3
⁄8
1
⁄2
5
⁄8
3
⁄4
0.04
0.06
0.09
0.15
0.22
0.37
UR2
Reducing Flare Union
UR2-64
UR2-84
UR2-86
UR2-106
UR2-108
50210
50212
50213
50204
50205
10
5
10
5
5
Flare to Flare
3
⁄8 x 1⁄4
1
⁄2 x 1⁄4
1
⁄2 x 3⁄8
5
⁄8 x 3⁄8
5
⁄8 x 1⁄2
0.07
0.12
0.14
0.18
0.19
Catalog
Number
UR3-46
UR3-48
UR3-64
UR3-68
UR3-84
UR3-86
UR3-810
UR3-108
UR3-1210
IBCA
Number
Std.
Pkg.
Size
(Inches)
10
5
20
10
10
10
10
5
2
Flare to Flare
1
⁄4 x 3 ⁄8
1
⁄4 x 1 ⁄2
3
⁄8 x 1 ⁄4
3
⁄8 x 1 ⁄2
1
⁄2 x 1 ⁄4
1
⁄2 x 3 ⁄8
1
⁄2 x 5 ⁄8
5
⁄8 x 1 ⁄2
3
⁄4 x 5 ⁄8
0.04
0.11
0.09
0.12
0.11
0.13
0.19
0.19
0.30
Flare to Solder
1
⁄4 x 1 ⁄4
1
⁄4 x 3 ⁄8
3
⁄8 x 3 ⁄8
3
⁄8 x 1 ⁄2
1
⁄2 x 1 ⁄2
1
⁄2 x 5 ⁄8
5
⁄8 x 5 ⁄8
3
⁄4 x 3 ⁄4
0.03
0.03
0.06
0.06
0.11
0.10
0.15
0.25
50222
50223
50227
50229
50232
50233
50230
50216
50217
Weight
(Pounds)
Catalog
Number
US3
Flare to Sweat Adapter
US3-44
US3-46
US3-66
US3-68
US3-88
US3-810
US3-1010
US3-1212
50237
50238
50239
50240
50243
50241
50234
50236
10
5
10
5
5
2
5
5
US4
Flare Swivel Connector
US4-4
US4-6
US4-8
US4-10
U3 Male Flare x
Female I.P.S.
U3-4A
U3-4B
U3-4C
U3-6A
U3-6B
U3-6C
U3-6D
U3-8C
U3-8D
U3-10D
U3-10E
42
50298
50299
50300
50304
50305
50306
50307
50310
50311
50293
50294
10
10
5
5
5
5
5
5
5
5
2
Flare to npti
1
⁄4 x 1⁄8
1
⁄4 x 1⁄4
1
⁄4 x 3⁄8
3
⁄8 x 1⁄8
3
⁄8 x 1⁄4
3
⁄8 x 3⁄8
3
⁄8 x 1⁄2
1
⁄2 x 3⁄8
1
⁄2 x 1⁄2
5
⁄8 x 1⁄2
5
⁄8 x 3⁄4
0.04
0.07
0.08
0.06
0.09
0.10
0.16
0.12
0.18
0.20
0.36
50245
50247
50248
50244
10
10
10
5
F. Flare
1
⁄4
3
⁄8
1
⁄2
5
⁄8
0.12
0.16
0.24
0.35
50317
50318
F. Flare x M.P.T.
1
5
⁄4 x 1 ⁄8
0.06
1
10
⁄4 x 1 ⁄4
0.06
Std.
Pkg.
Size
(Inches)
Weight
(Pounds)
50039
50040
50041
50045
50046
50047
50048
50049
50050
50051
50052
50035
50037
10
10
5
5
10
10
5
5
5
10
2
2
2
Flare to npte
1
⁄4 x 1 ⁄8
1
⁄4 x 1 ⁄4
1
⁄4 x 3 ⁄8
3
⁄8 x 1 ⁄8
3
⁄8 x 1 ⁄4
3
⁄8 x 3 ⁄8
3
⁄8 x 1 ⁄2
1
⁄2 x 1 ⁄4
1
⁄2 x 3 ⁄8
1
⁄2 x 1 ⁄2
1
⁄2 x 3 ⁄4
5
⁄8 x 3 ⁄4
3
⁄4 x 3 ⁄4
0.04
0.08
0.09
0.08
0.09
0.11
0.14
0.13
0.17
0.17
0.24
0.26
0.35
E2
Double End Flare Elbow
E2-4
E2-6
E2-8
E2-10
U5
Female Flare x Male
Pipe Adapters
U5-4A
U5-4B
E1-4A
E1-4B
E1-4C
E1-6A
E1-6B
E1-6C
E1-6D
E1-8B
E1-8C
E1-8D
E1-8E
E1-10E
E1-12E
IBCA
Number
50056
50058
50059
50053
Flare
1
⁄4
3
⁄8
1
⁄2
5
⁄8
0.07
0.10
0.14
0.21
Flare to npti
1
⁄4 x 1 ⁄8
1
⁄4 x 1 ⁄4
3
⁄8 x 3 ⁄8
1
⁄2 x 1 ⁄2
0.05
0.13
0.19
0.33
5
5
5
2
E3
Male Flare x Female I.P.S.
E3-4A
E3-4B
E3-6C
E3-8D
50065
50066
50071
50075
5
5
5
2
Flare Fittings
Elbows (Continued)
Tees
Caps
E4
Male Flare x Female Flare
T1
Male Flare x I.P.S.
on Branch
N5
Flare Seal Cap
Catalog
Number
E4-44
E4-66
IBCA
Number
50077
50078
Std.
Pkg.
Size
(Inches)
Weight
(Pounds)
Flare to F. Flare
1
5
⁄4 x 1⁄4
0.13
3
2
⁄8 x 3⁄8
0.24
Catalog
Number
T1-4A
T1-4B
T1-4C
IBCA
Number
50183
50184
50185
Std.
Pkg.
Size
(Inches)
Weight
(Pounds)
Flare to Flare to npte
10 1⁄4 x 1⁄4 x 1⁄8
0.07
10 1⁄4 x 1⁄4 x 1⁄4
0.09
2 1⁄4 x 1⁄4 x 3⁄8
0.12
ES4
Forged Brass Swivel
Elbow
ES4-44
ES4-66
ES4-88
ES4-1010
50029
50030
50032
50028
Flare to F. Flare
1
2
⁄4
3
2
⁄8
1
2
⁄2
5
2
⁄8
N5-4
N5-5
N5-6
N5-8
N5-10
N5-12
IBCA
Number
Std.
Pkg.
Size
(Inches)
Weight
(Pounds)
50136
50137
50138
50139
50133
50134
25
5
25
10
10
2
F. Flare
1
⁄4
5
⁄16
3
⁄8
1
⁄2
5
⁄8
3
⁄4
0.03
0.03
0.05
0.08
0.14
0.21
10
5
50
F. Flare
1
⁄4
3
⁄8
1
⁄4
0.02
0.04
0.02
SAE Flare
1
⁄4
0.003
N6
Soft Seated Flare
Seal Cap
T2
Flare Tee
0.13
0.19
0.22
0.31
T2-4
T2-6
T2-8
T2-10
Catalog
Number
50194
50196
50197
50192
10
10
5
2
Flare
1
⁄4
3
⁄8
1
⁄2
5
⁄8
0.07
0.17
0.20
0.30
T3
Male Flare x I.P.S.
on Run
N6-4
N6-6
N6-4-M
50140
50141
50336
P9002-20
Flare Seal Cap/Plastic,
Fingertight Sealing
P9002-20
55011
Plugs
T3-4A
T3-4B
50198
50199
Flare to npte to Flare
5 1⁄4 x 1⁄8 x 1⁄4
0.08
5 1⁄4 x 1⁄4 x 1⁄4
0.11
P2-4
P2-6
P2-8
P2-10
T6
Forged Brass Male to
Female Flare Tee
T6-4
50203
2
P2
Flare Seal Plug
Flare to Flare
1
⁄4 x 1⁄4 x 1⁄4
50149
50151
50152
50146
10
10
10
5
Flare
1
⁄4
3
⁄8
1
⁄2
5
⁄8
0.03
0.06
0.09
0.14
50153
50155
50157
50158
50159
10
10
5
5
5
npte
1
⁄8
1
⁄4
3
⁄8
1
⁄2
3
⁄4
0.03
0.06
0.07
0.13
0.21
0.14
P3
I.P.S. Plug
P3-A
P3-B
P3-C
P3-D
P3-E
43
Flare Fittings
Bonnets
Nipples
Adapters
B1
Flare Bonnet (Copper)
U10
Hex. Pipe Nipple
K1
Cylinder Valve Adapter
and Gaskets
Catalog
Number
IBCA
Number
Std.
Pkg.
Size
(Inches)
Weight
(Pounds)
50003
50005
50006
25
5
5
Flare
1
⁄4
3
⁄8
1
⁄2
0.001
0.004
0.008
B1-4
B1-6
B1-8
Catalog
Number
U10-A
U10-B
U10-C
U10-D
U10-E
IBCA
Number
Std.
Pkg.
Size
(Inches)
Weight
(Pounds)
50276
50278
50280
50281
50282
5
10
5
5
5
Male Pipe
1
⁄8
1
⁄4
3
⁄8
1
⁄2
3
⁄4
0.03
0.06
0.08
0.15
0.18
Gaskets
Bushings
B2
Flare Gasket (Copper)
R1
Hex. Pipe Bushing
Catalog
Number
IBCA
Number
Std.
Pkg.
K1-1
K1-3
K1-5
K1-8
P10-E
50090
50091
50092
50093
51679
10
10
2
2
P10-F
51680
Size
(Inches)
Weight
(Pounds)
npsm to Flare
3
⁄4 x 1 ⁄4
0.16
3
⁄4 x 3 ⁄8
0.19
3
⁄4 x 1 ⁄2
0.19
1
⁄2 x 1 ⁄4
0.15
3
⁄4 Gasket for
K1-1, K1-3, K1-5
1
⁄2 Gasket for K1-8
Fusible Fittings
B2-4
B2-5
B2-6
B2-8
B2-10
B2-12
50012
50013
50014
50015
50009
50010
25
5
25
25
10
10
Flare
1
⁄4
5
⁄16
3
⁄8
1
⁄2
5
⁄8
3
⁄4
0.001
0.001
0.002
0.002
0.003
0.004
10
10
5
F. Flare
1
⁄4
3
⁄8
1
⁄2
0.08
0.13
0.19
Couplings
R1-AB
R1-BA
R1-CB
R1-DB
R1-DC
R1-EC
R1-ED
50161
50162
50163
50164
50165
50166
50167
5
10
10
10
10
5
10
npte to npti
1
⁄8 x 1 ⁄4
1
⁄4 x 1 ⁄8
3
⁄8 x 1 ⁄4
1
⁄2 x 1 ⁄4
1
⁄2 x 3 ⁄8
3
⁄4 x 3 ⁄8
3
⁄4 x 1 ⁄2
0.05
0.02
0.04
0.08
0.05
0.11
0.09
FU
Fusible Metal Union*
(275°, 212°, 162°)
FU-4B-275°
FU-6C-275°
FU-6D-275°
FU-4B-212°
FU-6C-212°
FU-6D-212°
FU-6C-162°
50082
50086
50089
50081
50085
50088
50084
2
2
2
2
2
2
2
Flare to npte
1
⁄4 x 1 ⁄4
3
⁄8 x 3 ⁄8
3
⁄8 x 1 ⁄2
1
⁄4 x 1 ⁄4
3
⁄8 x 3 ⁄8
3
⁄8 x 1 ⁄2
3
⁄8 x 3 ⁄8
0.04
0.09
0.10
0.04
0.09
0.10
0.09
Flare to npte
1
⁄8
1
⁄4
3
⁄8
1
⁄2
1
⁄8
1
⁄4
3
⁄8
1
⁄2
3
⁄8
1
⁄2
0.04
0.06
0.08
0.16
0.04
0.06
0.08
0.16
0.08
0.16
U4
Flare Connector
U4-4
U4-6
U4-8
50314
50315
50316
PC
Hex. Pipe Coupling
PC-J
PC-K
PC-L
PC-M
44
50142
50143
50144
50145
5
10
5
5
Female Pipe
1
⁄8
1
⁄4
3
⁄8
1
⁄2
0.03
0.08
0.10
0.20
97, 98, 92, 93
Fusible Metal Plug*
(275°, 212°, 162°)
97-275
98-275
92-275
93-275
97-212
98-212
92-212
93-212
92-162
93-162
50331
50335
50325
50328
50330
50334
50324
50327
50323
50326
Other fusible melting temperatures available upon
special order.
*Underwriters’ Laboratories, Inc. Listed
Wrot Copper Fittings
A
Couplings
Catalog
No.
W10142
W10143
W10144
W10145
W10157
W10146
W10147
W10148
W10149
W10150
W10151
W10152
W10153
W10154
IBCA
No.
30672
30896
30898
30900
30902
30904
30908
30910
30914
30916
30918
30920
30922
30924
Dimensions (Inches)
OD Size
5
⁄16
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
41⁄8
3
A
Couplings (Continued)
100 Staked Stop Wrot Coupling
Copper to Copper
101 Wrot Coupling Without Stop
Copper to Copper
A
3
Weight
(lbs.)
⁄32
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
0.006
0.008
0.014
0.026
0.040
0.061
0.104
0.150
0.217
0.401
0.624
0.970
1.390
2.040
A
Weight
(lbs.)
3
Catalog
No.
IBCA
No.
W1901
W1902
W1903
W1904
W1905
W1906
W1907
W1908
W1909
W1910
W1911
35⁄8
W1913
30948
30950
30952
30954
30956
30960
30956
30964
30966
30968
30970
30972
30974
Dimensions (Inches)
OD Size
3
⁄8
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
41⁄8
1
A
23
⁄32
⁄64
13⁄32
121⁄64
119⁄32
129⁄32
21⁄32
217⁄64
249⁄64
31⁄32
313⁄32
329⁄32
413⁄32
55
Weight
(lbs.)
0.008
0.014
0.028
0.040
0.060
0.104
0.150
0.217
0.401
0.624
0.970
1.390
1.990
100RS Rolled Stop Coupling
Copper to Copper
Catalog
No.
W1001
W1003
5
⁄16
W1009
W1017
W1022
W1028
W1034
W1047
W1055
W1063
W1072
W1082
W1092
W10100
W10107
IBCA
No.
30662
30666
30672
30678
30686
30694
30702
30712
30730
30746
30764
30782
30798
30814
30830
30838
Dimensions (Inches)
OD Size
3
⁄16
⁄4
5
⁄16
3
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
41⁄8
1
1
⁄16
⁄16
1
⁄16
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
3
⁄32
1
0.003
0.004
0.006
0.008
0.014
0.026
0.040
0.061
0.104
0.150
0.217
0.401
0.624
0.970
0.390
2.040
45
A
101R Wrot Reducing Coupling
Copper to Copper
Catalog
No.
W1004
W1010
W1011
W1019
W1021
W1023
W1025
W1027
W1029
W1030
W1031
W1035
W1036
W1037
W1038
W1049
W1050
W1051
W1052
W1056
W1058
W1060
W1064
W1065
W1067
W1069
W1073
W1074
W1075
W1077
W1079
W1083
W1084
W1085
W1086
W1093
W1094
W1095
W10101
W10108
W10109
W10110
61S41S
IBCA
No.
30668
30680
30684
30688
30692
30696
30698
30700
30704
30706
30708
30714
30716
30718
30720
30734
30736
30738
30740
30748
30752
30756
30766
30768
30772
30776
30784
30786
30788
30790
30792
30800
30802
30804
30806
30816
30818
30820
30832
30840
30842
30844
30862
⁄4 x 3⁄16
⁄8 x 5⁄16
3
⁄8 x 1 ⁄4
1
⁄2 x 3 ⁄8
1
⁄2 x 1 ⁄4
5
⁄8 x 1 ⁄2
5
⁄8 x 3 ⁄8
5
⁄8 x 1 ⁄4
3
⁄4 x 5 ⁄8
3
⁄4 x 1 ⁄2
3
⁄4 x 3⁄8
7
⁄8 x 3 ⁄4
7
⁄8 x 5 ⁄8
7
⁄8 x 1 ⁄2
7
⁄8 x 3 ⁄8
11⁄8 x 7⁄8
11⁄8 x 3⁄4
11⁄8 x 5⁄8
11⁄8 x 1⁄2
13⁄8 x 11⁄8
13⁄8 x 7⁄8
13⁄8 x 5⁄8
15⁄8 x 13⁄8
15⁄8 x 11⁄8
15⁄8 x 7⁄8
15⁄8 x 5⁄8
21⁄8 x 15⁄8
21⁄8 x 13⁄8
21⁄8 x 11⁄8
21⁄8 x 7⁄8
21⁄8 x 5⁄8
25⁄8 x 21⁄8
25⁄8 x 15⁄8
25⁄8 x 13⁄8
25⁄8 x 11⁄8
31⁄8 x 25⁄8
31⁄8 x 21⁄8
31⁄8 x 15⁄8
35⁄8 x 31⁄8
41⁄8 x 35⁄8
41⁄8 x 31⁄8
41⁄8 x 25⁄8
61⁄8 x 41⁄8
3
3
⁄32
⁄32
5
⁄32
3
⁄16
1
⁄4
5
⁄32
1
⁄4
23
⁄64
5
⁄32
7
⁄32
5
⁄16
3
⁄16
3
⁄16
21
⁄64
7
⁄16
13
⁄32
3
⁄8
7
⁄16
1
⁄2
5
⁄16
15
⁄32
41
⁄64
11
⁄32
7
⁄16
21
⁄32
25
⁄32
13
⁄32
21
⁄32
25
⁄32
1
11⁄8
15
⁄32
7
⁄8
15
⁄16
11⁄8
1
⁄2
13
⁄16
15⁄32
1
⁄2
17
⁄32
7
⁄8
11⁄8
13⁄16
3
Weight
(lbs.)
Catalog
No.
IBCA
No.
0.005
0.008
0.008
0.017
0.017
0.028
0.020
0.026
0.035
0.037
0.033
0.064
0.059
0.050
0.053
0.103
0.100
0.105
0.094
0.144
0.130
0.177
0.210
0.220
0.218
0.209
0.386
0.369
0.382
0.397
0.402
0.612
0.660
0.648
0.640
0.902
0.950
1.040
1.360
1.960
1.950
2.020
4.762
W1849
W1856
31044
31046
Dimensions (Inches)
OD Size
A
11⁄8 x 7⁄8
13⁄8 x 11⁄8
13
1
Weight
(lbs.)
⁄32
⁄2
Unions
0.110
0.160
A
102 Wrot Union
Copper to Copper
Catalog
No.
IBCA
No.
W8001
W8002
W8003
W8004
W8005
A11205
A11206
A11207
33576
33578
33580
33582
33584
33585
33586
33587
Dimensions (Inches)
OD Size
A
3
13
1
27
⁄8
⁄2
5
⁄8
7
⁄8
11⁄8
13⁄8
15⁄8
25⁄8
Weight
(lbs.)
⁄32
⁄64
1
⁄2
21
⁄32
0.120
0.170
0.113
0.255
102F Wrot Union
Copper to Female NPT
Catalog
No.
1
⁄2 x 3 ⁄8
IBCA
No.
55246
A
Dimensions (Inches)
OD Size
A
1
⁄2 x 3⁄8
15
3
⁄8 x 1 ⁄4
IBCA
No.
55249
Weight
(lbs.)
⁄16
0.210
A
102M Wrot Union
Copper to Male NPT
Catalog
No.
46
A
110 Wrot Eccentric Coupling
Copper to Copper
Dimensions (Inches)
OD Size
A
1
Dimensions (Inches)
OD Size
A
3
⁄8 x 1⁄4
113⁄16
Weight
(lbs.)
0.180
Adapters
A
103 Wrot Female Adapter
Catalog
No.
IBCA
No.
W1207
W1215
W1225
W1231
W1246
W1263
W1271
W1279
W1287
W1296
30100
30110
30120
30130
30150
30160
30170
30180
30190
30200
⁄4 x 1 ⁄8
⁄8 x 1 ⁄4
1
⁄2 x 3 ⁄8
5
⁄8 x 1 ⁄2
7
⁄8 x 3 ⁄4
11⁄8 x 1
13⁄8 x 11⁄4
15⁄8 x 11⁄2
21⁄8 x 2
25⁄8 x 21⁄2
3
7
⁄16
⁄32
19
⁄32
7
⁄8
23
⁄32
31
⁄32
13⁄32
15⁄32
11⁄4
11⁄2
15
IBCA
No.
W1531
W1546
W1563
W1564
W1571
W1579
W1587
30236
30242
30248
34287
30254
30260
30266
Dimensions (Inches)
OD Size
A
5
⁄8 x 1 ⁄2
⁄8 x 3 ⁄4
11⁄8 x 1
11⁄8 x 13⁄4
13⁄8 x 11⁄4
15⁄8 x 11⁄2
21⁄8 x 2
7
Weight
(lbs.)
Catalog
No.
IBCA
No.
0.024
0.030
0.060
0.090
0.128
0.199
0.290
0.420
0.650
1.200
W1205
W1206
3
⁄8x1⁄2
W1214
W1216
W1224
W1226
W1230
W1232
W1233
W1238
W1239
W1245
W1247
W1264
W1265
W1270
W1272
W1278
W1280
21x11⁄2
30140
30106
30112
30114
30116
30124
30126
30134
30136
30138
30142
30144
30154
30156
30166
30168
30172
30174
30182
30184
30292
A
1032 Wrot Female Street Adapter
Fitting to Female NPT
Catalog
No.
A
103R Wrot Reducing Female Adapter
Dimensions (Inches)
OD Size
A
1
Adapters (Continued)
Weight
(lbs.)
13⁄8
111⁄16
131⁄32
0.096
0.138
0.199
25⁄32
27⁄16
219⁄32
0.322
0.500
0.658
Dimensions (Inches)
OD Size
A
1
⁄4 x 3 ⁄8
⁄4 x 1 ⁄4
3
⁄8 x 1 ⁄2
3
⁄8 x 3 ⁄8
3
⁄8 x 1 ⁄8
1
⁄2 x 1 ⁄2
1
⁄2 x 1 ⁄4
5
⁄8 x 3 ⁄4
5
⁄8 x 3 ⁄8
5
⁄8 x 1 ⁄4
3
⁄4 x 3 ⁄4
3
⁄4 x 1 ⁄2
7
⁄8 x 1
7
⁄8 x 1 ⁄2
11⁄8 x 3⁄4
11⁄8 x 1⁄2
13⁄8 x 11⁄2
13⁄8 x 1
15⁄8 x 2
15⁄8 x 11⁄4
21⁄8 x 11⁄2
1
5
⁄8
⁄2
25
⁄32
21
⁄32
11
⁄32
7
⁄8
7
⁄16
9
⁄32
9
⁄16
9
⁄16
7
⁄8
3
⁄4
17⁄32
11
⁄16
43
⁄64
11
⁄16
119⁄64
55
⁄64
17⁄16
7
⁄8
13⁄16
IBCA
No.
W1532
32038
A
Dimensions (Inches)
OD Size
A
5
⁄8 x 3 ⁄8
0.050
0.030
0.080
0.050
0.020
0.080
0.030
0.107
0.050
0.060
0.130
0.090
0.231
0.111
0.171
0.230
0.420
0.241
0.668
0.336
0.730
1
1032R Wrot Reducing Female
Street Adapter
Catalog
No.
Weight
(lbs.)
11⁄8
Weight
(lbs.)
0.041
47
A
104R Wrot Reducing Male Adapter
Copper to Male NPT
104 Wrot Male Adapter
Copper to Male NPT
Catalog
No.
IBCA
No.
W1115
W1125
W1131
W1146
W1163
W1171
W1179
W1187
W1196
W1199
W1150
30290
30300
30310
30330
30342
30354
30368
30378
30388
30400
30410
Dimensions (Inches)
OD Size
A
3
⁄8 x 1 ⁄4
⁄2 x 3 ⁄8
5
⁄8 x 1 ⁄2
7
⁄8 x 3 ⁄4
11⁄8 x 1
13⁄8 x 11⁄4
15⁄8 x 11⁄2
21⁄8 x 2
25⁄8 x 21⁄2
31⁄8 x 3
41⁄8 x 4
1
15
⁄32
⁄8
19
⁄32
13
⁄16
27
⁄32
11⁄2
19⁄16
111⁄32
121⁄32
125⁄32
129⁄32
7
IBCA
No.
W1431
W1446
W1463
W1471
W1487
3
⁄8 x 1⁄4
30436
30444
30452
30460
30480
30424
Dimensions (Inches)
OD Size
A
5
⁄8 x 1 ⁄2
⁄8 x 3 ⁄4
11⁄8 x 1
13⁄8 x 11⁄4
21⁄8 x 2
3
⁄8 x 1⁄4
7
Weight
(lbs.)
Catalog
No.
IBCA
No.
0.027
0.049
0.066
0.116
0.201
0.372
0.429
0.794
1.270
2.270
3.340
W1105
W1106
W1113
W1114
W1116
W1123
W1124
W1126
W1129
W1130
W1132
W1133
W1138
W1139
W1145
W1147
W1161
W1162
W1164
W1165
W1170
W1172
W1178
W1180
W1181
W1188
W1189
W1197
30282
30284
30292
30294
30296
30302
30304
30306
30314
30316
30318
30320
30324
30326
30336
30338
30344
30346
30348
30350
30358
30360
30370
30372
30374
30380
30382
30390
A
1042 Wrot Male Street Adapter
Fitting to Male NPT
Catalog
No.
A
17⁄16
127⁄32
25⁄32
21⁄2
213⁄16
13⁄8
Weight
(lbs.)
0.074
0.130
0.230
0.410
0.740
0.065
Dimensions (Inches)
OD Size
A
1
⁄4 x 3 ⁄8
⁄4 x 1 ⁄4
3
⁄8 x 1 ⁄2
3
⁄8 x 3 ⁄8
3
⁄8 x 1 ⁄8
1
⁄2 x 3 ⁄4
1
⁄2 x 1 ⁄2
1
⁄2 x 1 ⁄4
5
⁄8 x 1
5
⁄8 x 3 ⁄4
5
⁄8 x 3 ⁄8
5
⁄8 x 1 ⁄4
3
⁄4 x 3 ⁄4
3
⁄4 x 1 ⁄2
7
⁄8 x 1
7
⁄8 x 1 ⁄2
11⁄8 x 11⁄2
11⁄8 x 11⁄4
11⁄8 x 3⁄4
11⁄8 x 1⁄2
13⁄8 x 11⁄2
13⁄8 x 1
15⁄8 x 2
15⁄8 x 11⁄4
15⁄8 x 1
21⁄8 x 11⁄2
21⁄8 x 11⁄4
25⁄8 x 2
1
3
⁄4
⁄16
7
⁄8
63
⁄64
17
⁄32
111⁄32
15
⁄16
5
⁄8
119⁄32
13
⁄16
3
⁄4
5
⁄8
11⁄8
11
⁄16
131⁄64
59
⁄64
129⁄32
121⁄32
13⁄32
29
⁄32
145⁄64
11⁄4
125⁄32
127⁄64
115⁄32
15⁄8
13⁄4
19⁄64
48
IBCA
No.
W1447
30448
A
Dimensions (Inches)
OD Size
A
7
⁄8 x 1⁄2
0.045
0.033
0.075
0.049
0.014
0.140
0.070
0.040
0.240
0.132
0.060
0.070
0.130
0.080
0.250
0.110
0.540
0.390
0.200
0.140
0.520
0.300
0.780
0.430
0.560
0.740
0.700
0.931
7
1042R Wrot Reducing Male Street
Adapter
Fitting to Male NPT
Catalog
No.
Weight
(lbs.)
123⁄32
Weight
(lbs.)
0.100
Elbows
Elbows
106 Wrot 45° Elbow
Copper to Copper
105 Wrot 90° Street Elbow-Long
Radius
Fitting to Fitting
A
A
A
Catalog
No.
IBCA
No.
W3005
W3012
W3021
W3026
W3030
W3034
W3044
W3050
W3055
W3059
W3063
W3067
W3070
W3073
31082
31086
31090
31096
31102
31106
31120
31128
31134
31140
31148
31156
31126
31168
Dimensions (Inches)
OD Size
A
1
⁄4
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
41⁄8
3
1
⁄8
⁄64
1
⁄4
17
⁄64
7
⁄16
3
⁄8
13
⁄32
33
⁄64
19
⁄32
25
⁄32
7
⁄8
63
⁄64
15⁄32
111⁄64
15
A
Weight
(lbs.)
0.005
0.011
0.020
0.030
0.060
0.080
0.150
0.230
0.340
0.620
0.970
1.440
2.140
3.100
IBCA
No.
W2003
W2009
W2017
W2022
W2028
W2034
W2047
W2084
W2085
W2086
W2087
W2088
W2090
31260
31262
31266
31272
31280
31288
31296
31306
31314
31322
31330
31338
31352
Dimensions (Inches)
OD Size
A
1
⁄4
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
41⁄8
3
IBCA
No.
W2659
31944
Dimensions (Inches)
OD Size
A
21⁄8
Weight
(lbs.)
43⁄8
1.156
107R Wrot 90° Reducing Elbow-Long
Radius
Copper to Copper
A
B
107C Wrot 90° Elbow-Short Radius
Copper to Copper
Catalog
No.
Catalog
No.
1
⁄4
⁄8
1
⁄2
9
⁄16
7
⁄8
13
⁄16
11⁄16
11⁄16
17⁄32
11⁄2
13⁄4
2
219⁄32
3
Weight
(lbs.)
0.006
0.012
0.024
0.040
0.060
0.100
0.180
0.280
0.400
0.750
1.180
1.880
4.220
Catalog
No.
IBCA
No.
W2719
W2723
W2729
W2735
W2736
W2737
W2749
W2058
W2064
W2065
W2073
W2083
31674
31678
31686
31694
31696
31698
31710
31724
31732
31734
31742
––
OD Size
1
Dimensions (Inches)
A
⁄2 x 3 ⁄8
⁄8 x 1 ⁄2
3
⁄4 x 5 ⁄8
7
⁄8 x 3 ⁄4
7
⁄8 x 5 ⁄8
7
⁄8 x 1 ⁄2
11⁄8 x 7⁄8
13⁄8 x 7⁄8
15⁄8 x 13⁄8
15⁄8 x 11⁄8
21⁄8 x 15⁄8
25⁄8 x 21⁄8
5
41
⁄64
⁄4
31
⁄32
15⁄32
7
⁄8
27
⁄32
11⁄4
15⁄16
21⁄4
137⁄64
25⁄16
17⁄8
3
B
39
⁄64
⁄16
7
⁄8
11⁄16
7
⁄8
11
⁄16
19⁄64
13⁄16
2
113⁄32
23⁄16
11⁄2
11
Weight
(lbs.)
0.026
0.040
0.080
0.120
0.090
0.070
0.170
0.230
0.470
0.350
0.770
1.128
49
Elbows (Continued)
Elbows (Continued)
A
107L2 Wrot 90° Street
Elbow-Long Radius
Fitting to Copper
1062 Wrot 45° Street Elbow
Fitting to Copper
B
B
Catalog
No.
1
⁄4
W2809
W2817
W2822
W2828
W2834
W2847
W2350
W2355
W2359
W2363
W2368
W2393
W2395
IBCA
No.
31790
31792
31796
31802
31810
31816
31830
31838
31844
31850
31856
31862
31868
31874
Dimensions (Inches)
OD Size
A
1
⁄4
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
41⁄8
3
1
⁄2
⁄4
3
⁄4
7
⁄8
11⁄8
15⁄32
11⁄2
17⁄8
23⁄16
3
33⁄4
45⁄8
51⁄4
57⁄8
3
A
B
Weight
(lbs.)
7
⁄8
11⁄8
13⁄16
17⁄16
113⁄16
2
215⁄32
229⁄32
35⁄16
43⁄8
59⁄32
611⁄32
77⁄32
85⁄32
0.008
0.016
0.033
0.056
0.087
0.120
0.224
0.388
0.560
1.156
1.970
3.135
4.700
7.110
107L Wrot 90° Elbow-Long Radius
Copper to Copper
IBCA
No.
W2715
W2710
W2716
W2717
W2722
W2728
W2734
W2747
W2055
W2063
W2072
W2082
W2092
W2093
W2095
31664
31666
31668
31672
31676
31684
31692
31708
31720
31730
31740
31750
31756
31762
31770
B
50
1
⁄4
⁄16
3
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
41⁄8
W3312
W3321
W3326
W3330
W3334
W3344
W3350
W3355
W3359
W3363
W3373
31186
31190
31194
31198
31202
31206
31212
31216
31220
31224
31236
Dimensions (Inches)
OD Size
A
3
⁄8
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
41⁄8
1
B
9
41
⁄32
⁄32
5
⁄16
27
⁄64
13
⁄32
7
⁄16
17⁄32
19
⁄32
25
⁄32
29
⁄32
19⁄32
⁄64
⁄32
27
⁄32
11⁄16
13⁄16
17⁄16
19⁄16
13⁄4
23⁄16
27⁄16
31⁄2
9
27
Weight
(lbs.)
0.011
0.020
0.030
0.060
0.080
0.150
0.240
0.340
0.630
0.980
3.200
A
A
Dimensions (Inches)
OD Size
A
5
IBCA
No.
105C Wrot 90° Street
Elbow-Short Radius
Fitting to Fitting
A
Catalog
No.
Catalog
No.
1
⁄2
⁄16
3
⁄4
3
⁄4
7
⁄8
11⁄8
13⁄16
11⁄2
17⁄8
23⁄16
3
33⁄4
45⁄8
51⁄4
57⁄8
9
B
1
⁄2
⁄16
3
⁄4
3
⁄4
7
⁄8
11⁄8
13⁄16
11⁄2
17⁄8
23⁄16
3
33⁄4
45⁄8
51⁄4
57⁄8
9
Weight
(lbs.)
0.008
0.013
0.016
0.033
0.056
0.087
0.120
0.224
0.388
1.560
1.156
1.970
3.135
4.700
7.110
Catalog
No.
IBCA
No.
W2612
W2626
3⁄4
W2634
W2644
W2684
31452
31460
31908
31468
31472
31476
Dimensions (Inches)
OD Size
A
3
⁄8
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
5
27
⁄32
11⁄32
11⁄4
115⁄32
121⁄32
17⁄8
Weight
(lbs.)
0.012
0.050
0.070
0.100
0.180
0.280
Elbows (Continued)
107CR Wrot 90° Reducing
Elbow-Short Radius
Copper to Copper
A
B
Catalog
No.
IBCA
No.
W2019
W2023
W2025
W2029
W2036
W2051
W2049
W2056
W2077
W2078
25S21S
31268
31274
31276
31282
31290
31300
31298
31308
31316
31324
31332
OD Size
1
⁄2 x 3 ⁄8
⁄8 x 1 ⁄2
5
⁄8 x 3 ⁄8
3
⁄4 x 5 ⁄8
7
⁄8 x 5 ⁄8
11⁄8 x 5⁄8
11⁄8 x 7⁄8
13⁄8 x 11⁄8
15⁄8 x 13⁄8
21⁄8 x 15⁄8
25⁄8 x 21⁄8
5
Dimensions (Inches)
A
15
Weight
(lbs.)
B
3
⁄32
⁄16
17
⁄32
15
⁄32
39
⁄64
13
⁄32
3
⁄4
7
⁄8
11⁄16
19⁄16
17⁄8
⁄8
⁄8
3
⁄8
7
⁄8
15
⁄32
7
⁄8
19
⁄32
11
⁄16
7
⁄8
17⁄32
11⁄2
7
0.026
0.040
0.030
0.080
0.080
0.120
0.150
0.230
0.340
0.600
1.060
3
107C2 Wrot 90° Street
Elbow-Short Radius
Fitting to Copper
A
B
Catalog
No.
IBCA
No.
W2305
W2312
W2321
W2326
W2330
W2334
W2344
W2384
W2385
W2386
W2387
W2388
W2389
W2390
31390
31392
31396
31400
31404
31408
31412
31416
31420
31424
31428
31432
31436
31440
OD Size
1
⁄4
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
41⁄8
3
Dimensions (Inches)
A
1
⁄4
⁄8
1
⁄2
9
⁄16
7
⁄8
13
⁄16
11⁄16
7
⁄8
113⁄32
119⁄32
13⁄4
2
21⁄4
219⁄64
3
B
5
⁄8
⁄4
15
⁄16
113⁄16
11⁄2
15⁄8
21⁄32
129⁄32
23⁄8
231⁄32
311⁄32
325⁄32
411⁄32
47⁄8
3
Weight
(lbs.)
0.006
0.012
0.024
0.050
0.060
0.100
0.180
0.280
0.390
0.760
1.180
1.860
2.700
4.200
Tees
111 Wrot Tee
Copper to Copper to Copper
A
A
Catalog
No.
W40302
W40306
W40313
W4000
W4001
W4006
W4017
W4031
W4048
W4068
W4084
W40102
W40123
W40152
W40190
W40200
IBCA
No.
32602
32606
32622
32640
32668
32700
32732
32768
32818
32866
32910
32970
33030
33124
33250
33258
Dimensions (Inches)
OD Size
A
B
3
⁄16
⁄4
5
⁄16
3
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
41⁄8
1
3
⁄16
⁄64
7
⁄32
17
⁄64
5
⁄16
21
⁄64
7
⁄16
1
⁄2
21
⁄32
7
⁄8
15⁄32
13⁄8
121⁄32
17⁄8
35⁄32
213⁄32
13
3
⁄16
⁄64
7
⁄32
17
⁄64
5
⁄16
21
⁄64
7
⁄16
1
⁄2
21
⁄32
7
⁄8
15⁄32
13⁄8
121⁄32
17⁄8
35⁄32
213⁄32
13
C
3
⁄16
⁄32
9
⁄32
1
⁄4
3
⁄8
11
⁄32
1
⁄2
17
⁄32
21
⁄32
25
⁄32
15⁄32
13⁄8
111⁄16
111⁄16
21⁄4
29⁄16
7
A
Weight
(lbs.)
0.007
0.015
0.020
0.028
0.047
0.050
0.100
0.160
0.291
0.405
0.710
1.290
1.900
2.750
4.170
6.620
51
Outlet
Tees (Continued)
Catalog
No.
111R, RR, or BH* Wrot Reducing Tee
Run
A
3S3S4S
W40368
4S4MS4S
W40308
5S5S4S
5S4S4S
W4016
W4005
W40324
W40330
W40332
W4015
W4002
W40350
W4003
W4004
W40358
W40363
W4067
W4047
W4029
W4007
W4008
W4014
W4009
W4010
W4011
W4012
W4013
W4046
W4018
W4020
W4023
W4025
W4026
W4027
W4065
W4032
W4033
W4034
W4035
IBCA
No.
32604
32610
33492
32612
32626
32630
32642
32644
32648
32656
32664
32672
32674
32678
32684
32686
32688
32694
32702
32704
32706
32708
32710
32712
32716
32718
32720
32724
32728
32736
32738
32742
32750
32754
32756
32758
32770
32772
32774
32776
32778
Dimensions (Inches)
OD Size
A
3
⁄16 x 3⁄16 x 1⁄4
1
⁄4 x 1⁄4 x 3⁄8
1
⁄4 x 1⁄4FIT x 1⁄4
1
⁄4 x 1⁄4 x 3⁄16
5
⁄16 x 5⁄16 x 1⁄4
5
⁄16 x 1⁄4 x 1⁄4
3
⁄8 x 3⁄8 x 5⁄8
3
⁄8 x 3⁄8 x 1⁄2
3
⁄8 x 3⁄8 x 1⁄4
3
⁄8 x 1⁄4 x 3⁄8
3
⁄8 x 1⁄4 x 1⁄4
1
⁄2 x 1⁄2 x 5⁄8
1
⁄2 x 1⁄2 x 3⁄8
1
⁄2 x 1⁄2 x 1⁄4
1
⁄2 x 3⁄8 x 1⁄2
1
⁄2 x 3⁄8 x 3⁄8
1
⁄2 x 3⁄8 x 1⁄4
1
⁄2 x 1⁄4 x 1⁄2
5
⁄8 x 5⁄8 x 11⁄8
5
⁄8 x 5⁄8 x 7⁄8
5
⁄8 x 5⁄8 x 3⁄4
5
⁄8 x 5⁄8 x 1⁄2
5
⁄8 x 5⁄8 x 3⁄8
5
⁄8 x 5⁄8 x 1⁄4
5
⁄8 x 1⁄2 x 5⁄8
5
⁄8 x 1⁄2vx 1⁄2
5
⁄8 x 1⁄2 x 3⁄8
5
⁄8 x 3⁄8 x 5⁄8
5
⁄8 x 3⁄8 x 3⁄8
3
⁄4 x 3⁄4 x 7⁄8
3
⁄4 x 3⁄4 x 5⁄8
3
⁄4 x 3⁄4 x 3⁄8
3
⁄4 x 5⁄8 x 1⁄2
3
⁄4 x 1⁄2 x 3⁄4
3
⁄4 x 1⁄2 x 5⁄8
3
⁄4 x 1⁄2 x 1⁄2
7
⁄8 x 7⁄8 x 11⁄8
7
⁄8 x 7⁄8 x 3⁄4
7
⁄8 x 7⁄8 x 5⁄8
7
⁄8 x 7⁄8 x 1⁄2
7
⁄8 x 7⁄8 x 3⁄8
*R=Reducing on Outlet
RR=Reducing on Run
BH=Larger Diameter Outlet
52
17
⁄64
13
⁄32
13
⁄64
13
⁄64
7
⁄32
7
⁄32
21
⁄32
15
⁄32
17
⁄64
17
⁄64
17
⁄64
17
⁄32
5
⁄16
5
⁄16
5
⁄16
5
⁄16
5
⁄16
5
⁄16
15
⁄16
33
⁄64
21
⁄32
5
⁄16
9
⁄32
9
⁄32
3
⁄8
5
⁄16
9
⁄32
3
⁄8
9
⁄32
11
⁄16
27
⁄64
27
⁄64
27
⁄64
7
⁄16
27
⁄64
27
⁄64
3
⁄4
1
⁄2
25
⁄64
25
⁄64
25
⁄64
OD Size
Dimensions (Inches)
A
B
C
Weight
(lbs.)
C
Run
Catalog
No.
IBCA
No.
B
17
⁄64
13
⁄32
13
⁄64
13
⁄64
7
⁄32
11
⁄32
21
⁄32
15
⁄32
17
⁄64
13
⁄32
13
⁄32
17
⁄32
5
⁄16
5
⁄16
15
⁄32
15
⁄32
15
⁄32
9
⁄16
15
⁄16
33
⁄64
21
⁄32
5
⁄16
9
⁄32
9
⁄32
17
⁄32
1
⁄2
1
⁄2
21
32
5
⁄8
⁄16
27
⁄64
27
⁄64
5
⁄8
23
⁄32
23
⁄32
23
⁄32
3
⁄4
1
⁄2
25
⁄64
25
⁄64
25
⁄64
11
Weight
C
7
⁄32
1
⁄4
7
⁄32
7
⁄32
11
⁄32
11
⁄32
11
⁄32
3
⁄8
13
⁄32
1
⁄4
13
⁄32
11
⁄32
15
⁄32
39
⁄64
3
⁄8
15
⁄32
5
⁄8
3
⁄8
3
⁄4
15
⁄32
1
⁄2
13
⁄32
13
⁄32
1
⁄2
11
⁄32
13
⁄32
13
⁄32
11
⁄32
13
⁄32
17
⁄32
1
⁄2
23
⁄32
21
⁄32
1
⁄2
1
⁄2
21
⁄32
17
⁄32
3
⁄4
19
⁄32
11
⁄16
3
⁄4
B
(lbs.)
0.015
0.028
0.015
0.015
0.020
0.020
0.063
0.047
0.028
0.028
0.028
0.063
0.047
0.047
0.047
0.047
0.047
0.047
0.320
0.120
0.100
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.060
0.150
0.100
0.100
0.100
0.100
0.100
0.100
0.202
0.150
0.140
0.130
0.140
W4041
W4042
W4043
W4045
W40231
W40101
W4082
W4049
W4051
W4052
W4055
W4056
W4057
W4058
W4061
W4062
W4063
W40122
W40100
W4069
W4070
W4071
W4072
W4073
W4074
W4075
W4076
W4077
W4078
W4079
W4080
W4081
W4083
W40121
W4085
W4086
W4087
W4088
W4090
W4091
W4092
W4093
W4094
W4095
W4096
W4097
W4098
W40237
W4099
W40239
W40240
W40238
W40243
32790
32792
32794
32798
32804
32820
32822
32824
32828
32830
32836
32838
32840
32842
32856
32858
32860
32868
32870
32872
32874
32876
32878
32882
32884
32886
32888
32890
32894
32896
32898
32900
32904
32912
32914
32916
32918
32920
32924
32926
32928
32930
32932
32936
32938
32940
32942
32944
32948
32950
32952
32954
32956
7
1
⁄8 x 5⁄8 x 7⁄8
⁄2
1
⁄8 x 5⁄8 x 3⁄4
⁄2
7
25
⁄8 x 5⁄8 x 5⁄8
⁄64
7
25
⁄8 x 5⁄8 x 3⁄8
⁄64
7
25
⁄8 x 1⁄2 x 5⁄8
⁄64
11⁄8 x 11⁄8 x 15⁄8 11⁄4
11⁄8 x 11⁄8 x 13⁄8 15⁄32
1
11⁄8 x 11⁄8 x 7⁄8
⁄2
23
11⁄8 x 11⁄8 x 5⁄8
⁄64
23
11⁄8 x 11⁄8 x 1⁄2
⁄64
21
11⁄8 x 7⁄8 x 11⁄8
⁄32
1
11⁄8 x 7⁄8 x 7⁄8
⁄2
1
11⁄8 x 7⁄8 x 3⁄4
⁄2
23
11⁄8 x 7⁄8 x 5⁄8
⁄64
21
11⁄8 x 5⁄8 x 11⁄8
⁄32
1
11⁄8 x 5⁄8 x 7⁄8
⁄2
23
11⁄8 x 5⁄8 x 5⁄8
⁄64
13⁄8 x 13⁄8 x 21⁄8 13⁄4
13⁄8 x 13⁄8 x 15⁄8 13⁄16
3
13⁄8 x 13⁄8 x 11⁄8
⁄4
5
13⁄8 x 13⁄8 x 7⁄8
⁄8
1
13⁄8 x 13⁄8 x 5⁄8
⁄2
1
13⁄8 x 13⁄8 x 1⁄2
⁄2
7
13⁄8 x 11⁄8 x 13⁄8
⁄8
3
13⁄8 x 11⁄8 x 11⁄8
⁄4
5
13⁄8 x 11⁄8 x 7⁄8
⁄8
1
13⁄8 x 11⁄8 x 5⁄8
⁄2
1
13⁄8 x 11⁄8 x 1⁄2
⁄2
7
13⁄8 x 7⁄8 x 13⁄8
⁄8
3
13⁄8 x 7⁄8 x 11⁄8
⁄4
5
13⁄8 x 7⁄8 x 7⁄8
⁄8
1
13⁄8 x 7⁄8 x 5⁄8
⁄2
7
13⁄8 x 5⁄8 x 13⁄8
⁄8
15⁄8 x 15⁄8 x 21⁄8 137⁄64
15⁄8 x 15⁄8 x 13⁄8 31⁄32
15⁄8 x 15⁄8 x 11⁄8 27⁄32
11
15⁄8 x 15⁄8 x 7⁄8
⁄16
9
15⁄8 x 15⁄8 x 5⁄8
⁄16
15⁄8 x 13⁄8 x 15⁄8 17⁄32
15⁄8 x 13⁄8 x 13⁄8 31⁄32
15⁄8 x 13⁄8 x 11⁄8 27⁄32
11
15⁄8 x 13⁄8 x 7⁄8
⁄16
9
15⁄8 x 13⁄8 x 5⁄8
⁄16
15⁄8 x 11⁄8 x 15⁄8 15⁄32
15⁄8 x 11⁄8 x 13⁄8 31⁄32
15⁄8 x 11⁄8 x 11⁄8 27⁄32
11
15⁄8 x 11⁄8 x 7⁄8
⁄16
9
15⁄8 x 11⁄8 x 5⁄8
⁄16
15⁄8 x 7⁄8 x 15⁄8 15⁄32
31
15⁄8 x 7⁄8 x 13⁄8
⁄32
27
15⁄8 x 7⁄8 x 11⁄8
⁄32
11
15⁄8 x 7⁄8 x 7⁄8
⁄64
9
15⁄8 x 7⁄8 x 5⁄8
⁄16
7
25
⁄32
⁄32
5
⁄8
5
⁄8
23
⁄32
11⁄4
15⁄32
1
⁄2
23
⁄64
23
⁄64
53
⁄64
11
⁄16
11
⁄16
9
⁄16
5
⁄64
15
⁄16
13
⁄16
13⁄4
13⁄16
3
⁄4
5
⁄8
1
⁄2
1
⁄2
7
⁄8
3
⁄4
5
⁄8
1
⁄2
1
⁄2
7
⁄8
3
⁄4
5
⁄8
1
⁄2
7
⁄8
137⁄64
31
⁄32
27
⁄32
11
⁄16
9
⁄16
13⁄16
13⁄16
27
⁄32
7
⁄8
13
⁄16
11⁄4
15⁄16
11⁄8
1
13
⁄16
119⁄64
11⁄4
15⁄16
11⁄32
15
⁄16
25
17
⁄32
⁄4
19
⁄32
3
⁄4
19
⁄32
15⁄32
32
⁄32
5
⁄8
11
⁄16
13
⁄16
21
⁄32
5
⁄8
15
⁄16
11
⁄16
21
⁄32
5
⁄8
11
⁄16
13⁄8
15⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
25
⁄32
13⁄8
11⁄16
11⁄16
31
⁄32
31
⁄32
17⁄32
11⁄16
11⁄16
31
⁄32
31
⁄32
15⁄32
11⁄16
11⁄16
31
⁄32
31
⁄32
15⁄32
11⁄16
11⁄16
31
⁄32
31
⁄32
3
0.500
0.150
0.130
0.140
0.140
0.660
0.460
0.223
0.186
0.186
0.290
0.220
0.223
0.186
0.290
0.223
0.185
1.290
0.690
0.391
0.297
0.256
0.256
0.405
0.384
0.297
0.256
0.256
0.405
0.391
0.287
0.256
0.405
1.290
0.640
0.610
0.570
0.470
0.690
0.640
0.600
0.560
0.470
0.690
0.640
0.610
0.560
0.470
0.680
0.640
0.600
0.550
0.470
Plugs and Caps
C
Tees (Continued)
111R, RR, or BH* Wrot Reducing Tee
Catalog
No.
W40244
W40144
W40103
W40104
W40105
W40106
W40107
W40109
W40110
W40111
W40112
W40113
W40115
W40116
W40117
W40118
W40119
W40245
W40247
W40124
W40125
W40126
W40127
W40128
W40129
W40130
W40131
W40132
W40138
W40139
W40220
W40221
W40222
W40151
W40150
W40149
W40148
W40147
W40146
W40158
W40156
31S25S14S
W40165
31S15S15S
W40198
W40197
W40196
W40192
W40205
W40204
41S25S25S
IBCA
No.
OD Size
32960
32972
32974
32976
32978
32980
32982
32984
32986
32988
32990
32992
32998
33000
33002
33004
33006
33012
33016
33034
33036
33038
33040
33042
33044
33046
33048
33050
33064
33066
33076
33092
33108
33128
33130
33132
33134
33136
33138
33146
33150
33156
33164
33186
33262
33264
33266
33274
33284
33286
33304
15⁄8 x 5⁄8 x 15⁄8
21⁄8 x 21⁄8 x 25⁄8
21⁄8 x 21⁄8 x 15⁄8
21⁄8 x 21⁄8 x 13⁄8
21⁄8 x 21⁄8 x 11⁄8
21⁄8 x 21⁄8 x 7⁄8
21⁄8 x 21⁄8 x 5⁄8
21⁄8 x 15⁄8 x 21⁄8
21⁄8 x 15⁄8 x 15⁄8
21⁄8 x 15⁄8 x 13⁄8
21⁄8 x 15⁄8 x 11⁄8
21⁄8 x 15⁄8 x 7⁄8
21⁄8 x 13⁄8 x 21⁄8
21⁄8 x 13⁄8 x 15⁄8
21⁄8 x 13⁄8 x 13⁄8
21⁄8 x 13⁄8 x 11⁄8
21⁄8 x 13⁄8 x 7⁄8
21⁄8 x 11⁄8 x 21⁄8
21⁄8 x 11⁄8 x 11⁄8
25⁄8 x 25⁄8 x 21⁄8
25⁄8 x 25⁄8 x 15⁄8
25⁄8 x 25⁄8 x 13⁄8
25⁄8 x 25⁄8 x 11⁄8
25⁄8 x 25⁄8 x 7⁄8
25⁄8 x 25⁄8 x 5⁄8
25⁄8 x 21⁄8 x 25⁄8
25⁄8 x 21⁄8 x 21⁄8
25⁄8 x 21⁄8 x 15⁄8
25⁄8 x 15⁄8 x 21⁄8
25⁄8 x 15⁄8 x 15⁄8
25⁄8 x 13⁄8 x 25⁄8
25⁄8 x 11⁄8 x 25⁄8
25⁄8 x 7⁄8 x 25⁄8
31⁄8 x 31⁄8 x 25⁄8
31⁄8 x 31⁄8 x 21⁄8
31⁄8 x 31⁄8 x 15⁄8
31⁄8 x 31⁄8 x 13⁄8
31⁄8 x 31⁄8 x 11⁄8
31⁄8 x 31⁄8 x 7⁄8
31⁄8 x 25⁄8 x 25⁄8
31⁄8 x 25⁄8 x 15⁄8
31⁄8 x 25⁄8 x 7⁄8
31⁄8 x 21⁄8 x 25⁄8
31⁄8 x 15⁄8 x 15⁄8
41⁄8 x 41⁄8 x 31⁄8
41⁄8 x 41⁄8 x 25⁄8
41⁄8 x 41⁄8 x 21⁄8
41⁄8 x 41⁄8 x 7⁄8
41⁄8 x 31⁄8 x 25⁄8
41⁄8 x 31⁄8 x 21⁄8
41⁄8 x 25⁄8 x 25⁄8
A
Dimensions (Inches)
A
B
15⁄32
2
11⁄32
31
⁄32
13
⁄16
11
⁄16
5
⁄8
13⁄8
13⁄32
31
⁄32
13
⁄16
11
⁄16
13⁄32
11⁄32
31
⁄32
13
⁄16
11
⁄16
13⁄8
27
⁄32
17⁄16
13⁄16
1
7
⁄8
3
⁄4
1
⁄2
121⁄32
17⁄16
13⁄16
17⁄16
13⁄16
121⁄32
121⁄32
121⁄32
111⁄16
17⁄16
13⁄16
31
⁄32
7
⁄8
3
⁄4
111⁄16
13⁄16
3
⁄4
111⁄16
13⁄16
21⁄32
125⁄32
11⁄2
13
⁄32
125⁄32
11⁄2
125⁄32
131⁄64
2
11⁄32
31
⁄32
13
⁄16
11
⁄16
5
⁄8
137⁄64
119⁄64
13⁄16
11⁄16
11⁄16
125⁄32
13⁄8
13⁄16
19
⁄16
15⁄32
125⁄32
19⁄32
17⁄16
13⁄16
1
7
⁄8
3
⁄4
1
⁄2
2
23⁄64
13⁄4
215⁄32
219⁄64
231⁄32
37⁄32
37⁄16
111⁄16
17⁄16
13⁄16
31
⁄32
7
⁄8
3
⁄4
213⁄32
17⁄8
117⁄32
223⁄32
225⁄32
21⁄32
125⁄32
11⁄2
13
⁄32
229⁄32
223⁄32
35⁄16
116 Wrot Fitting End Plug
For Fitting
B
A
C
Weight
(lbs.)
15⁄32
111⁄16
111⁄32
13⁄8
15⁄16
11⁄4
11⁄4
13⁄8
111⁄32
13⁄8
15⁄16
11⁄4
13⁄8
111⁄32
13⁄8
15⁄16
11⁄4
13⁄8
111⁄32
111⁄16
119⁄32
139⁄64
15⁄8
131⁄64
11⁄2
111⁄16
111⁄16
119⁄32
111⁄16
119⁄32
111⁄16
111⁄16
111⁄16
131⁄32
131⁄32
129⁄32
159⁄64
159⁄64
113⁄16
131⁄32
129⁄32
113⁄16
131⁄32
129⁄32
21⁄2
219⁄32
27⁄16
25⁄16
219⁄32
27⁄16
219⁄32
0.670
1.900
1.080
1.030
0.900
0.920
0.860
1.300
1.080
1.030
0.950
0.900
1.300
1.090
1.030
1.000
0.900
1.290
0.900
1.660
1.410
1.320
1.340
1.250
1.060
1.890
1.630
1.410
1.630
1.400
1.890
1.860
1.870
2.420
2.270
2.050
1.920
1.900
1.690
2.400
2.000
1.670
2.370
1.960
5.660
5.260
4.910
2.168
5.080
4.710
5.100
Catalog
No.
IBCA
No.
A1556
32028
Dimensions (Inches)
OD Size
A
11⁄8
13
⁄16
Weight
(lbs.)
0.060
Plugs and Caps (Continued)
117 Wrot Tube Cap
For Tube End
A
Catalog
No.
IBCA
No.
W7002
W7004
W7006
W7007
W7008
W7009
W7011
W7012
W7013
W7014
W7015
W7016
W7017
W7018
30620
30622
30624
30626
30628
30630
30632
30634
30636
30638
30640
30642
30644
30646
Dimensions (Inches)
OD Size
A
1
⁄4
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
25⁄8
31⁄8
35⁄8
41⁄8
3
9
⁄32
⁄8
15
⁄32
5
⁄8
7
⁄8
53
⁄64
15
⁄16
11⁄8
13⁄16
17⁄32
133⁄64
123⁄32
17⁄8
163⁄64
3
Weight
(lbs.)
0.003
0.005
0.009
0.016
0.030
0.040
0.060
0.100
0.150
0.260
0.450
0.690
0.970
1.340
53
A
Fitting Reducers
Catalog
No.
IBCA
No.
W1302
W1306
W1312
W1314
W1315
W1317
W1320
W1321
W1322
W1325
W1326
W1327
W1328
W1337
W1338
W1339
W1340
W1343
W1345
W1347
W1350
W1351
W1353
W1355
W1358
W1359
W1360
W1362
W1364
W1367
W1368
W1369
W1370
W1376
W1377
W1378
W1379
W1381
W1382
W1383
W1386
W1387
W1388
W1389
A2008
32040
32042
32044
32046
32048
32050
32054
32056
32058
32062
32064
32066
32044
32072
32074
32076
32078
32082
32084
32086
32090
32092
32094
32096
32102
32104
32106
32108
32110
32114
32116
32118
32120
32126
32128
32130
32132
32136
32138
32140
32144
32146
32148
32150
32154
54
119 Wrot Flush Type Fitting Reducer
Fitting to Copper
Dimensions (Inches)
OD Size
A
1
⁄4 x 1 ⁄8
⁄8 x 1 ⁄4
1
⁄2 x 3 ⁄8
1
⁄2 x 1 ⁄4
5
⁄8 x 1 ⁄2
5
⁄8 x 3 ⁄8
3
⁄4 x 5 ⁄8
3
⁄4 x 1 ⁄2
3
⁄4 x 3 ⁄8
7
⁄8 x 3 ⁄4
7
⁄8 x 5 ⁄8
7
⁄8 x 1 ⁄2
7
⁄8 x 3 ⁄8
11⁄8 x 7⁄8
11⁄8 x 3⁄4
11⁄8 x 5⁄8
11⁄8 x 1⁄2
13⁄8 x 11⁄8
13⁄8 x 7⁄8
13⁄8 x 5⁄8
15⁄8 x 13⁄8
15⁄8 x 11⁄8
15⁄8 x 7⁄8
15⁄8 x 5⁄8
21⁄8 x 15⁄8
21⁄8 x 13⁄8
21⁄8 x 11⁄8
21⁄8 x 7⁄8
21⁄8 x 5⁄8
25⁄8 x 21⁄8
25⁄8 x 15⁄8
25⁄8 x 13⁄8
25⁄8 x 11⁄8
31⁄8 x 25⁄8
31⁄8 x 21⁄8
31⁄8 x 15⁄8
31⁄8 x 13⁄8
35⁄8 x 31⁄8
35⁄8 x 25⁄8
35⁄8 x 21⁄8
41⁄8 x 35⁄8
41⁄8 x 31⁄8
41⁄8 x 25⁄8
41⁄8 x 21⁄8
51⁄8 x 41⁄8
3
A
Fitting Reducers (Continued)
118 Wrot Fitting Reducer
Fitting to Copper
33
⁄64
⁄2
17
⁄32
5
⁄8
23
⁄32
47
⁄64
25
⁄32
29
⁄32
15
⁄16
15
⁄16
1
11⁄16
11⁄8
13⁄16
17⁄32
19⁄32
13⁄8
11⁄4
111⁄32
115⁄32
119⁄64
117⁄32
111⁄16
17⁄8
111⁄16
115⁄16
21⁄8
211⁄32
27⁄16
115⁄16
21⁄4
25⁄16
217⁄32
23⁄32
233⁄64
211⁄16
225⁄32
21⁄4
27⁄16
251⁄64
223⁄32
215⁄16
37⁄32
317⁄32
311⁄32
1
Weight
(lbs.)
0.004
0.007
0.014
0.106
0.027
0.023
0.033
0.035
0.034
0.060
0.060
0.040
0.050
0.100
0.090
0.100
0.090
0.150
0.120
0.150
0.210
0.200
0.200
0.190
0.380
0.340
0.360
0.380
0.390
0.620
0.640
0.610
0.600
0.870
0.950
0.960
1.020
1.280
1.320
1.380
1.850
1.870
1.970
2.060
3.240
B
Catalog
No.
IBCA
No.
W1706
W1712
W1715
W1717
W1720
W1722
W1725
W1726
W1737
W1738
W1739
W1743
W1750
W1758
30530
30532
30536
30538
30542
30546
30548
30550
30556
30558
30560
30564
30570
30580
Dimensions (Inches)
OD Size
A
3
3
1
⁄8 x 1 ⁄4
⁄2 x 3 ⁄8
5
⁄8 x 1 ⁄2
5
⁄8 x 3 ⁄8
3
⁄4 x 5 ⁄8
3
⁄4 x 3 ⁄8
7
⁄8 x 3 ⁄4
7
⁄8 x 5 ⁄8
11⁄8 x 7⁄8
11⁄8 x 3⁄4
11⁄8 x 5⁄8
13⁄8 x 11⁄8
15⁄8 x 13⁄8
21⁄8 x 15⁄8
3
Weight
(lbs.)
B
1
⁄8
⁄8
⁄16
⁄16
3
⁄16
3
⁄16
1
⁄8
5
⁄16
1
⁄8
1
⁄4
5
⁄32
9
⁄32
13
⁄32
1
⁄16
1
⁄8
1
⁄4
1
9
⁄16
⁄2
5
⁄8
5
⁄8
3
⁄4
3
⁄4
29
⁄32
39
⁄32
29
⁄32
31
⁄32
13⁄32
111⁄32
1
0.008
0.012
0.022
0.037
0.030
0.077
0.040
0.080
0.120
0.180
0.220
0.160
0.210
0.660
Bushings
1193 Wrot Flush Type Bushing
A
Catalog
No.
IBCA
No.
A7813
A7812
30600
30602
Dimensions (Inches)
OD Size
A
5
9
5
⁄8 x 1 ⁄4
⁄8 x 1 ⁄8
9
Weight
(lbs.)
⁄16
⁄16
0.023
0.036
P-Trap
A
B
123 Wrot Suction-Line P-Trap
Copper to Copper
C
Catalog
No.
W60999
W61008
W61000
W61001
W61002
W61003
W61009
IBCA
No.
32000
32002
32004
32006
32008
32010
32012
OD Size
5
⁄8
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
3
Dimensions (Inches)
A
B
C
21⁄4
3
31⁄2
317⁄32
5
5
6
23⁄16
27⁄8
23⁄4
211⁄32
31⁄2
31⁄2
41⁄8
25⁄32
59⁄32
57⁄32
51⁄8
51⁄4
73⁄4
85⁄8
D
D
Weight
(lbs.)
347⁄64
6
53⁄16
59⁄32
7
813⁄16
97/8
0.200
0.480
0.590
1.090
1.890
2.040
3.710
Return Bends
138 Wrot Return Bend
Copper to Copper
120 Copper Tube Strap
Double Hole
B
A
Catalog
No.
W6020
W6041
W6036
W6032
W6060
W6058
W6051
5
⁄8x11⁄2C
3
⁄4x21⁄4C
W6092
W60111
W60110
13Sx4C
13Sx3C
W60140
IBCA
No.
32302
32314
32316
32320
32330
32332
32344
32346
32352
32364
32368
32370
32374
32378
32384
OD Size
3
⁄8 x 11⁄2C
1
⁄2 x 3C
1
⁄2 x 2C
1
⁄2 x 11⁄2C
5
⁄8 x 3C
5
⁄8 x 21⁄2C
5
⁄8 x 19⁄16C
5
⁄8 x 11⁄2C
3
⁄4 x 21⁄4C
7
⁄8 x 21⁄2C
11⁄8 x 31⁄4C
11⁄8 x 3C
13⁄8 x 4C
13⁄8 x 3C
21⁄8 x 51⁄2C
Dimensions (Inches)
A
B
11⁄2
3
2
11⁄2
3
21⁄2
19⁄16
11⁄2
21⁄4
21⁄2
31⁄4
3
4
3
51⁄2
5
⁄16
13⁄4
11⁄4
1
113⁄16
19⁄16
13⁄32
11⁄16
15⁄8
111⁄16
23⁄16
21⁄16
211⁄16
23⁄8
33⁄16
Weight
(lbs.)
Catalog
No.
ICBA
No.
0.029
0.085
0.066
0.053
0.130
0.110
0.070
0.070
0.140
0.190
0.350
0.330
0.560
0.460
1.750
A1203
A1278
A1366
A2529
A1467
A2574
A2614
A2650
A2675
A2708
32410
32412
32414
32416
32418
32420
32422
32424
32426
32428
Dimensions (Inches)
OD Size
1
Weight
(lbs.)
⁄4
⁄8
1
⁄2
5
⁄8
3
⁄4
7
⁄8
11⁄8
13⁄8
15⁄8
21⁄8
0.005
0.007
0.008
0.009
0.011
0.012
0.014
0.041
0.048
0.063
Dimensions (Inches)
OD Size
Weight
(lbs.)
3
120S Copper Tube Strap
Single Hole
Heavy Weight
Catalog
No.
1
⁄4
⁄8
1
⁄2
5
⁄8
3
ICBA
No.
1
32410
32442
32414
32416
⁄4
⁄8
1
⁄2
5
⁄8
0.007
0.009
0.012
0.014
Dimensions
(Inches)
Weight
(lbs.)
⁄4 x 25 Foot Roll
1.800
3
125 Perforated Copper Strap
3
⁄4" Wide
Catalog
No.
ICBA
No.
A1211
32402
3
55
Joining Processes (Soldering)
Soldering and Brazing Copper Tube
Soldering and Brazing with capillary solder
joint fittings is the most common system for
joining copper tube. The American Welding
Society defines soldering as a joining
process which takes place below 840° and
brazing as a similar process which occurs
above 840°.
The basic theory and technique of soldering
and brazing are the same for all diameters.
The variables are: the amount of time, heat
and filler metal required to complete a designated joint. A good joint is the product of a
person well trained in the craft who knows
and respects the materials and methods
used.
Basic Steps in Joining Process
Measuring
Measuring the length of the tube must be
accurate. If the tube is too short it will not
reach all the way into the socket of the fitting
and a proper joint cannot be made.
Cutting
Cutting tube can be accomplished in a number of different ways to produce a satisfactory square-end cut. The tube can be cut with
a disc type tube cutter, a hacksaw, abrasive
wheels, or stationary and portable bandsaws. Care must be taken that the tube is
not deformed while being cut. Regardless of
the cutting method used, the cut must be
square with the run of the tube so that it will
seat properly in the fitting socket.
Reaming
Most methods of cutting leave a small burr
on the end of the tube. Unless these rough
edges are removed erosion-corrosion may
occur due to local turbulence and increased
velocities in the tube. Tools used to ream
tube ends include the reaming blade on the
tube cutter half-round or round files, a pocket
knife, or suitable deburring tool. With
annealed tube, care must be taken not to get
the tube end out-of-round by applying too
much pressure. Both the inside and outside
of the tube may require removal of the burr.
A properly reamed piece of tube will provide
a smooth surface for better flow.
Cleaning
Cleaning is quickly and easily done. The
removal of oxides and surface soil is crucial if
filler material is to flow properly. Oxides, surface
soil and oil can interfere with the strength of the
joint and this may result in the joint’s failure.
Mechanical cleaning is a simple operation. The
end of the tube should be cleaned using sand
cloth or nylon abrasive pads for a distance only
slightly more than the depth of the fitting socket.
The socket of the fitting should also be cleaned
using sand cloth, abrasive pads, or properly
sized fitting brushes. The same precautions, as
when reaming the tube should be observed.
56
Copper is a soft metal; if too much material
is removed, a loose fit will result and
interfere with satisfactory capillary action in
making the joint. The capillary space
between tube and fitting is approximately
0.004-in. Solder or brazing filler metal can fill
this gap by capillary action. This spacing is
critical for the filler metal to flow into the gap
and form a strong joint. Chemical cleaning
may be utilized, providing the tube and
fittings are thoroughly rinsed, according to
the manufacturer’s recommendations
furnished with the cleaner. This will neutralize any acidic conditions that may exist. The
surfaces, once cleaned, should not be
touched with bare hands or oily gloves. Skin
oils, lubricating oils and grease impair solder
flow and wetting.
Temperature Ranges
Up to this point, the joining process is the
same for both soldering and brazing. The
choice for soldering or brazing will depend
upon operating conditions. Solder joints are
generally used where the system temperatures do not exceed 250°F and brazed joints
can be used where greater strengths are
required, or where system temperatures are
as high as 350°F. In actual practice, most soldering is done at temperatures about 350°F to
550°F, while brazing is done at temperatures
ranging from 1100°F to 1550°F.
Because of the differences in the soldering
and brazing processes, each will be
discussed separately.
Soldering
Applying Flux
A non-aggressive soldering flux is recommended. Stir the flux before use. A good flux
will dissolve and remove traces of residual
oxides from the surfaces to be joined, protect
the surfaces from re-oxidation during heating
and promote the wetting of the surfaces by
the solder. A thin, even coating of flux should
be applied with a brush to both tube and
fitting. Avoid the use of fingers to apply flux.
Chemicals in the flux can be harmful if
carried to the eyes or open cuts.
Types of Solder
There are a variety of solders available that
will produce sound, leak-tight joints. Solders
that are used for piping applications contain
tin and varying amounts of either antimony,
copper, lead or silver. Choice of solder will
depend upon application and local codes.
For potable water systems, solders which do
not contain lead are the best choice.
Assembly
After both surfaces are properly fluxed, they
should be assembled by placing the fitting on
the tube, making sure the tube seats against
the base of the fitting socket. A slight twisting
motion is suggested to ensure even
coverage by the flux. Remove the excess
flux with a rag. Because of the heat that is
required during soldering and brazing, only
cotton rags should be used. Complete all
prepared joints within a single work day.
Care must be taken to assure that the tube
and fittings are properly supported with a
reasonable, uniform capillary space around
the entire circumference of the joint.
Uniformity of capillary space will ensure
good filler metal penetration of the guidelines
if successful joint making are followed.
Excessive joint clearance can cause the filler
metal to crack under stress or vibration.
Heating
Because of the open flame and high
temperatures required for soldering and the
flammability of the gases used, safety
precautions must be observed. The heat is
generally applied by use of an air/fuel torch.
These torches can use acetylene or a variety
of LP gases. Electric resistance pliers can
also be used.
Heating should begin with the flame
perpendicular to the tube. This preheat will
conduct the initial heat into the socket for
even distribution of heat inside and out.
Preheating depends upon the size of the
joint — experience will indicate the proper
amount of time. The flame should now be
moved onto the fitting. Move the flame from
the fitting socket onto the tube a distance
equal to the fitting socket. Touch the solder
to the joint. If the solder does not melt,
remove it and continue the heating process.
Be careful not to overheat or direct the flame
into the fitting cup. This action can cause the
flux to burn and destroy its effectiveness.
When the melting temperature has been
reached, heat may be applied to the base of
the cup to aid capillary action in drawing the
solder into the cup.
Applying Solder
When the tube is in a horizontal position,
start applying the solder slightly off-center of
the bottom of the joint. Proceed across the
bottom of the fitting and up to the top-center
position. Return to the point of beginning,
overlap the starting point and then proceed
up the incompleted side to the top. Again,
overlapping the solder. Molten solder will be
drawn into the joint by capillary action
regardless if the solder is being fed upward,
downward or horizontally.
Cooling and Cleaning
After the joint has been completed, natural
cooling is best. Shock cooling may cause
unnecessary stresses on the joint and may
result in eventual failure. Clean off any
remaining flux with a wet rag.
Joining Processes (Brazing)
Brazing
Applying Flux
The fluxes used for brazing copper joints are
different in composition from soldering
fluxes. They cannot, and should not, be used
interchangeably.
Brazing fluxes are water based. Similar to
soldering fluxes, brazing fluxes dissolve and
remove residual oxides from the metal
surfaces, they protect the metal surfaces
from re-oxidation during heating and they
promote the wetting of the surfaces to be
joined by the brazing filler metal. Fluxes also
provide the technician with an indication of
temperature. Application of the flux is the
same as when soldering. If the outside of the
fitting and the heat affected area of the tube
are covered with flux, it will prevent oxidation
and greatly improve the appearance of the
joint.
Brazing Filler Metals
There are two general types of brazing filler
metals used for joining copper tube: BCuP
(Brazing-Copper -Phosphorus) and BAg
(Brazing-Silver). These brazing filler metals
are classified according to their components.
BCuP filler metals are preferred for joining
copper tube and fittings. The phosphorus in
these filler metals acts as a fluxing agent and
the lower percentage of silver makes them
relatively low cost fillers metals. When using
copper tube, wrought copper fittings and
BCuP brazing filler metal, fluxing is an option
due to the self-fluxing action of the phosphorus present in all components of the brazed
joint.
The choice of brazing filler metals depends
upon four main factors:
• dimensional tolerance of the joint
• type and material of fitting (cast or
wrought)
• desired appearance
• cost
Heating
Oxy/fuel torches are generally used when
brazing because of the higher temperatures
required. Due to recent innovations in air/fuel
torch tip design, they can now be used on a
wider variety of sizes for soldering and
brazing.
When working with temperatures this high,
safety precautions must be followed and
care taken to protect both the operator and
the materials being used.
The heating operation is the same as for soldering. First preheat the tube and then the
tube and fitting. When the brazing filler metal
starts to melt, apply the heat at the base of
the fitting socket to help draw the brazing
filler metal in by capillary action.
Applying Brazing Filler Metal
Remember to allow the heat of the joint to
melt the filler metal. Do not melt the filler
metal with the torch. The melted filler metal
will be drawn into the joint by capillary action.
It is very important that the flame be in
continuous motion and should not be
allowed to remain on any one point long
enough to burn through the tube or fitting.
When the joint is complete, a continuous
fillet should be visible completely around the
joint. If the filler metal fails to flow, or has the
tendency to ball-up, it indicates oxidation on
the metal surfaces or insufficient heat on the
parts to be joined. If the filler metal refuses to
enter the joint and tends to flow over the outside of either part of the joint, it indicates that
this part is overheated or that the other part
is underheated.
Cooling and Cleaning
When the joint is complete, allow it to cool
naturally. Flux residues can be removed by
washing with hot water and brushing with a
stainless steel wire brush.
Summary
If the parts to be joined are properly prepared, properly heated and correct filler
metal is used, the finished joint should be
sound. Soldered or brazed copper piping
systems, when installed properly, will provide
years of safe and reliable service. Proper
training of the correct installation techniques,
such as those just covered, will give the
technician the ability to achieve consistently
reliable soldered and brazed joints in all
diameters.
Prepared with technical assistance from the
Copper Development Association.
57
Engineering Data
Wrot Copper and Bronze/Solder-Joint Pressure Fittings
T
G
K
O
A
Wrot Copper and Bronze/Solder-Joint Pressure Fittings*
Solder-Joint Ends Dimensions (Inches)
T
F
Std.
Water
Tube
Size
O
1
⁄8
⁄4
3
⁄8
1
⁄2
5
⁄8
3
⁄4
1
11⁄4
11⁄2
2
21⁄2
3
31⁄2
4
5
6
8
1
T
T
G
O
A
T
O
F
T
T
MALE END
Male End
OD
Length
A
K
Min. Max.
Min.
0.248
0.373
0.497
0.622
0.747
0.872
1.122
1.372
1.621
2.121
2.621
3.121
3.621
4.121
5.121
6.121
8.119
0.251
0.376
0.501
0.626
0.751
0.876
1.127
1.377
1.627
2.127
2.627
3.127
3.627
4.127
5.127
6.127
8.127
0.38
0.38
0.44
0.56
0.69
0.81
0.97
1.03
1.16
1.41
1.53
1.72
1.97
2.22
2.72
3.22
4.09
Female End
ID
Depth
F
G
Min. Max.
Min.
0.252
0.377
0.502
0.627
0.752
0.877
1.128
1.378
1.628
2.128
2.628
3.128
3.628
4.128
5.128
6.128
8.128
0.256
0.381
0.506
0.631
0.756
0.881
1.132
1.382
1.633
2.133
2.633
3.133
3.633
4.133
5.133
6.133
8.133
0.31
0.31
0.38
0.50
0.62
0.75
0.91
0.97
1.09
1.34
1.47
1.66
1.91
2.16
2.66
3.09
3.97
Metal
Thickness
T
Min.
Inside
Diameter of
Fitting 0
Min.
0.022
0.026
0.031
0.036
0.038
0.041
0.046
0.050
0.055
0.064
0.074
0.083
0.093
0.101
0.115
0.130
0.186
0.18
0.30
0.39
0.52
0.63
0.74
0.98
1.23
1.47
1.94
2.42
2.89
3.37
3.84
4.70
5.72
7.55
FEMALE END
Wrot Copper and Bronze/Solder-Joint Drainage Fittings *
Solder-Joint Ends Dimensions (Inches)
Size
11⁄4
11⁄2
2
3
4
Male End
OD
Length
A
K
Min. Max.
Min.
1.372
1.621
2.121
3.121
4.121
1.377
1.627
2.127
3.127
4.127
0.56
0.62
0.69
0.81
1.06
Female End
ID
Depth
F
G
Min. Max.
Min.
1.378
1.628
2.128
3.128
4.128
1.382
1.633
2.133
3.133
4.133
0.50
0.56
0.62
0.75
1.00
Metal
Thickness
T
Min.
Inside
Diameter of
Fitting 0
Min.
0.040
0.042
0.042
0.045
0.058
1.29
1.53
2.01
2.98
3.93
*Extracted from American National Standard Wrought-Copper and Wrought-Bronze SolderJoint Pressure Fittings (ANSI B16.22) with the permision of the publisher. The American
Society of Mechanical Engineers, 345 East 47th St., New York, N.Y.
Copper Tube - Standard Dimensions and Weights
Nominal
Tube Size
(Inches)
1
⁄4
⁄8
1
⁄2
5
⁄8
3
⁄4
1
11⁄4
11⁄2
2
21⁄2
3
31⁄2
4
5
6
8
3
OD Types
K-L-M-DWV
(Inches)
Type
K
0.375
0.50
0.625
0.75
0.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.125
8.125
0.305
0.402
0.527
0.652
0.745
0.995
1.245
1.481
1.959
2.435
2.907
3.385
3.857
4.875
5.741
7.583
Inside Diameter (Inches)
Type
Type
L
M
0.315
0.43
0.545
0.666
0.785
1.025
1.265
1.505
1.985
2.465
2.945
3.425
3.905
4.875
5.845
7.725
—
—
—
—
—
—
1.291
1.527
2.009
2.495
2.981
3.459
3.935
4.907
5.881
7.785
*Slight variations from these weights must be expected in practice.
58
Type
DWV
Type
K
—
—
—
—
—
—
1.295
1.541
2.041
—
3.035
—
4.009
4.981
5.959
—
0.035
0.049
0.049
0.049
0.065
0.065
0.065
0.072
0.083
0.095
0.109
0.12
0.134
0.16
0.192
0.271
Wall Thickness (Inches)
Type
Type
L
M
0.03
0.035
0.04
0.042
0.045
0.05
0.055
0.06
0.07
0.08
0.09
0.10
0.11
0.125
0.14
0.20
0.025
0.025
0.028
0.030
0.032
0.035
0.042
0.049
0.058
0.065
0.072
0.083
0.095
0.109
0.122
0.17
Type
DWV
Type
K
—
—
—
—
—
—
0.04
0.042
0.042
—
0.045
—
0.58
0.72
0.083
—
0.145
0.269
0.344
0.418
0.641
0.839
1.04
1.36
2.06
2.93
4.00
5.12
6.51
9.67
13.90
25.90
Pounds per Linear Foot*
Type
Type
L
M
0.126
0.198
0.285
0.362
0.455
0.655
0.884
1.14
1.75
2.48
3.33
4.29
5.38
7.61
10.20
19.30
0.106
0.145
0.204
0.263
0.328
0.465
0.682
0.94
1.46
2.03
2.68
3.58
4.66
6.66
8.92
16.50
Type
DWV
—
—
—
—
—
—
0.65
0.809
1.07
—
1.69
—
2.87
4.43
6.10
—
Engineering Data
Large Diameter Welded Design
Fitting Material:
Copper Alloy #122, Phosphorus
Deoxidized-High Residual Phosphorus
(DHP). Composition: 99% Copper;
0.015-0.04% Phosphorus.
Weld Material:
Silicon Bronze. Meets Specification
American Welding Society (AWS) A5.7-69
and American Metals Society (AMS)
4616 B.
Weld Specifications:
Tensile Strength: Up to 58,000 psi
Yield Strength: Up to 25,000 psi
Elongation in 2”: 53 to 55%
Hardness: 80 to 100 Brinell (500 kg Load)
Temperature: Melt 1832°F, Flow 1931°F
Dimensions and Specifications:
Welded fittings are produced in
accordance with specifications shown in
American National Standard (ANSI)
B16.22 for wrought copper and bronze
solder-joint pressure fittings.
Testing:
Each fitting is individually tested with air
under water. The bursting pressure of
the weld exceeds that of straight,
seamless ASTM B88-70 Type “L” copper
water tube, annealed, of comparable
diameter.
Method of Joining:
Electric Weld
Copper Tube Calculated Bursting Pressure
Nominal
Tube
Size
(Inches)
1
⁄4
⁄8
1
⁄2
5
⁄8
3
⁄4
1
11⁄4
11⁄2
2
21⁄2
3
31⁄2
4
5
6
8
3
OD
(Inches)
Types
K-L
0.375
0.500
0.625
0.750
0.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.125
8.125
ID
(Inches)
Type
Type
K
L
Wall Thickness
(Inches)
Type
Type
K
L
0.305
0.402
0.527
0.652
0.745
0.995
1.245
1.481
1.959
2.435
2.907
3.385
3.857
4.805
5.741
7.583
0.035
0.049
0.049
0.049
0.065
0.065
0.065
0.072
0.083
0.095
0.109
0.120
0.134
0.160
0.192
0.271
0.315
0.430
0.545
0.666
0.785
1.025
1.265
1.505
1.985
2.465
2.945
3.425
3.905
4.875
5.845
7.725
0.030
0.035
0.040
0.042
0.045
0.050
0.055
0.060
0.070
0.080
0.090
0.100
0.110
0.125
0.140
0.200
Bursting Pressure (lb. per sq. in.)
Type K
Type L
Hard
Soft
Hard
Soft
(Drawn) (Annealed) (Drawn) (Annealed)
6,700
7,100
5,600
4,700
5,300
4,200
3,400
3,200
2,800
2,600
2,500
2,400
2,300
2,200
2,300
2,400
5,600
5,900
4,700
3,900
4,500
3,500
2,800
2,700
2,300
2,200
2,100
2,000
1,900
1,900
1,900
2,000
5,800
5,000
4,600
4,000
3,700
3,200
2,900
2,700
2,400
2,200
2,100
2,000
1,900
1,800
1,600
1,800
4,800
4,200
3,800
3,400
3,100
2,700
2,400
2,200
2,000
1,800
1,700
1,700
1,600
1,500
1,400
1,500
Calculating Bursting Pressure
Bursting pressures are calculated using the following formula for thin, hollow cylinders under
tension.
P =
where:
P =
t =
D =
S =
2tS
D
Bursting Pressure, lb. per sq. in.
Wall Thickness, inches
Outside Tube Diameter, inches
Tensile Strength:
36,000 lb. per sq. in. for hard tubes
30,000 for soft tubes
With a safety factor of 5, maximum working pressures allowable by common usage up to 150°F
can be taken at 1⁄5 above the bursting pressures.
59
Spare Parts List
I.
“Tuffy” Diaphragm Packless Valves
Catalog
Series
Spring
Lower Stem
Upper Stem
Diaphragms
Bonnet
Handwheel
Handwheel Screw
Cap and Chain
114, 214
214X2
115,116
215, 216
216X7
217
234A
P204-11
P214-20
P214-7
P5502-6-6 (2)
P214-3
P1244-8R
P200-14C
–
P216-11
P216-10
P1032-7
P215-6 (Set)
P206-3
P1070-8R
P200-14C
–
P216-11
P115X3-21N
P1032-7
P215-6 (Set)
P206-3
P1070-8R
P200-14C
–
P217-11
P217-21N
P1032-7
P200-6 (Set)
P201-3
P1070-8R
P200-14C
–
P204-11
P214-20
P214-7
P5502-6-6 (2)
P214-3
P1244-8R
P200-14C
P234A-23-4
II. LPD Globe Valves
Catalog
Series
Bonnet Gasket
Cap Screws (4)
Packing Washer
Packing
Seal Cap Gasket
Packing Nut
Stem Assembly
Seal Cap
Bonnet
Sub Assembly*
Spare Parts Kit**
190, 191
290, 291
192, 193
292, 293
294
295, 296
297
P290C-14
P290C-12
P606-5
P490-6
P490-19N
P606-3
P290C-24
P290-4
P290C-2
P290C-31
P290C-32
P292C-14
P292C-12
P492-5
P492-6
P492-19
P292-4
P292C-24
P292-3
P292C-2
P292C-31
P293C-32
P294C-14
P11505-12SS
P492-5
P492-6
P492-19
P292-4
P294C-24
P292-3
P292C-2
P294C-31
P294C-32
P295C-14
P295C-12
P492-5
P492-6
P492-19
P292-4
P295C-24
P292-3
P295C-2
P295C-31
P297C-32
* Sub Assembly includes Packing Washer, Packing, Seal Cap Gasket, Packing Nut, Stem Assembly, Seal Cap, and Bonnet
**Spare Parts Kit includes Bonnet Gasket, Packing Washer, Packing, Seal Cap Gasket, and Stem Assembly
60
Spare Parts List
III. H.V. Check Valves
Catalog
Series
Seat Assembly
Bonnet
Bonnet Gasket
Spring
Bonnets Bolts (4)
802
803
804
185, 186
805, 806
187, 188
807, 808
809
884, 885
886
P802A-24T
P802B-2
P802-12
P802X1-11D
–
P804A-24T
P804A-2
P804A-12
P802X1-11D
–
P805C-24
P805C-2
P290C-14
P805A-11
P290C-12
P807C-24
P807C-2
P292C-14
P807A-11
P292C-12
P809C-24
P809C-2
P294C-14
P809A-11
P11506-12SS
P884C-30
P884C-2
P295C-14
P884-11
P295C-12
IV. Packed Angle Valves
Catalog
Series
Seal Cap
Seal Cap Gasket
Stem
Packing Nut
Packing
Packing Washer
1
⁄4 Cap & Chain
3
⁄8 Cap & Chain
Schrader Core
Outlet Cap
V.
Catalog
Series
Seal Cap Nut
Seal Cap
Slip Ring
Seal Cap Gasket
Stem
Packing Nut
Top Packing
Bottom Packing
®
600A
600B
600AX7
617A
605
606B
607
P600A-4
P600A-11
P600A-2
P600-3
P600-6B
P600-5
–
–
–
–
P600A-4
P600A-11
P600A-2
P600-3
P600-6B
P600-5
–
–
–
–
P600A-4
P600A-11
P600A-2
P600-3
P600-6B
P600-5
P617A-23-4
P617A-23-6
P290X1-26
P9002-20
P605-4
P605-11
P605-2
P605-3
P605-6B
P605-5
–
–
–
–
P600A-4
P600A-11
P503-2
P600-3
P600-6B
P600-5
–
–
–
–
P606-4
P606-11
P606-2
P606-3
P490-6
P606-5
–
–
–
–
Ball Valves - W Series / WA Series
586WA
587WA
591WA, 592WA
593WA, 594WA
P587B-67
P586WA-31
P587WA-43
P587B-20T
P587WA-2
P586WA-4
P586-6-1
P586-6-2
P590-67
P591WA-31
P590-43
P3060X5-20T
P591WA-2
P591WA-4
P590-6
P590-6
VI. Suction Line Filters
Catalog
Series
Spring
Bolts (6)
Cover
End Cap
Access Valve
Gasket
2CFA
3CFA
4CFA
5CFA
P11204-11
P11204-12SS
P11204-2
P11344-6
P11304-56
AG2
P11304-11
P11304-12SS
P11304-2
P11344-6
P11304-56
AG3
P11404-11
P11404-12SS
P11404-2
P11344-6
P11304-56
AG4
P11504-11
P11506A-12SS
P11505B-2
P11344-6
P11304-56
AG5
61
Codes, Regulations, and Specifications
Superior refrigeration and air conditioning
components are made to various regulations
and standards that currently exist in our
industry. Where codes or specifications
exist, Superior assures each product manufactured meets the maximum conditions of
such codes. In cases where there are no
code requirements, our manufacturing specifications require even tighter
controls to insure the optimum in good
engineering practice. Briefly outlined below
is a description of the various codes to which
our products are manufactured; detailed
information or data is available upon request.
Underwriters’ Laboratories, Inc. and
Canadian Standards Association.
We have submitted and obtained certified
listings on many of our standard products.
U.L. and C.S.A. listings are on file for such
items as the hermetic eye sight glass, driers,
fuse plugs, cylinder valves, flare fittings, etc.
Many of these items have been approved for
working pressures far greater than found in
normal refrigeration applications. For
instance, our hermetic eye sight glass is U.L.
approved for working pressures up to 500
psi (2,500 psi minimum bursting pressure).
Local and Municipal Codes.
There are many municipal governing bodies
that establish stringent codes for products
used within their local area. Where Superior
products are sold and used in these areas,
the necessary approvals have been
obtained.
62
ANSI/ASHRAE 15 American National
Standard for Mechanical Refrigeration.
This code outlines specific requirements for
the testing of pressure relief valves. Note
the relief valves cataloged on pages 22 and
23 are the most complete and diversified line
of approved relief valves available in the
industry. In addition to relief valves, all other
items in this catalog which come under the
jurisdiction of this safety code are built to
comply with its requirements.
ANSI-B70.1 American National Standard
for Refrigeration Flare Type Fittings.
This code outlines very accurately all the
dimensions required on refrigeration flare
type fittings. Only fittings that comply with
this code should be used in refrigeration
work to insure you the best performance.
Society of Automotive Engineers.
All requirements previously established by
the SAE were incorporated in the
ANSI-B70.1.
ANSI-B57.1 Compressed Gas Cylinder
Valve Outlet and Inlet Connections.
Superior products comply completely with
the requirements of this standard. Superior
staff sit on various cylinder gas committees
charged with modifications and improvements to this code.
Air Conditioning and Refrigeration
Institute Standards.
These standards are closely adhered to in
our manufacturing operation to make certain
that all Superior products meet the specifications and ratings outlined in the code.
Pamphlet S-1, Compressed Gas
Association, Inc., Safety Relief Device
Standards.
All Superior safety devices are built in
accordance with CGA’s recommendations.
For a complete cross reference of Superior
part numbers with CGA safety device numbers, contact the factory.
Regional Warehouses
Sherwood, Washington Plant
2200 North Main Street
Washington, PA 15301
Tel: +1-724-225-8000
Fax: +1-724-225-6188
Website - www.sherwoodvalve.com
Email: [email protected]
Southland Marketing
2576 Covington Hwy.
Conyers, GA 30012
Tel: +1-770-760-0627
Fax: +1-770-760-0727
Sherwood
634 North Eckhoff Avenue
Orange, CA 92868
Tel: +1-714-289-3635
Fax: +1-714-289-3638
To contact us for ordering or delivery
information, call toll free. (U.S. + Canada)
1-800-438-2916
1-800-242-5500
Tel: +1-724-225-8000
Fax: +1-724-225-6188
To contact us for any other issues:
(Domestic & International):
Wholesalers: +1-724-229-5564
OEM: +1-724-229-5570
Fax: +1-724-225-6188
FORM NO.: R-2001

Superior Refrigeration Products

Transcription

Similar documents

REFRIGERANT / OIL / COPPER / CHEMICALS

sioux tools | force product catalog

Electrical Installation

Cathodeon