generators - Peavey Mart

GENERATORS
12000 Watt Generator
3100 Watt Generator
623cc Powerease OHV engine. Electric start. 12000 max AC output. 9500
max AC continuous output. Receptacles: 2 x 120V 20A duplex, 1 x 120V 30A
twistlock, 1 x 120V/240V 30A twistlock, 1 x 120V/240V 50A twistlock. 12V DC
8.3A, Low oil shutdown. 8" wheel kit. (2-9-8785)
210cc Powerease engine. Recoil start. 3100 max watt output. 2800 running watt
output. Receptacle 4 x 1120 volt GFCI, 1 x 120 volt twistlock and 12 volt DC.
Low oil shutdown. AVR. (2-9-8740)
429.99
1999.99
ALSO
Available
Online
9000 Watt Generator
420cc Powerease engine. Electric start. 9000 max watt output. 7100 running
watt output. Receptacles 6 x 120 volt GFCI, 1 X 120 volt twistlock, and 1
X 240 volt twistlock and 12 volt DC. Low oil shutdown. AVR. 8" wheel kit.
(2-2-2611)
999.99
7 HP 3000W Inverter
ALSO
Available
212cc Powerease OHV. Pull-start engine. 2800
running watt output. 1 × 120v GFCI duplex
(20A). 1 × 120v twistlock (30A) 12v, 144w
(8.3A). Runs most 13,500 BTU RV AC units
and more. Parallel capability. Decibel rating:
59db @ rated load 53db @ 1/4 load. (2-9-8797)
Online
849.99
Circuit Transfer Kit
Generator Cord
54.99
The Reliance Controls Generator Power Transfer Kits provide fast, safe and easy
connection of emergency power to a home, office, store or farm. These self
merchandising kits contain everything you need to connect critical
circuits in a home, office, store or farm to a portable generator
for emergency standby power. Kit includes a six-circuit
professional transfer switch, a 30A rain tight power inlet box,
a 10 ft., 30A power cord and a 20A, L14-20 plug to fit smaller
generators. (2-2-2607)
399.99
Single Transfer Switch
The Easy/Tran TF transfer switch is designed
for the control of a single circuit, such as a
forced-air furnace, in the event of a power failure. The attached 18" flexible aluminum conduit
is pre-wired and allows the TF to be easily
connected at the circuit breaker panel or the
furnace or at any point in between. Power can
be supplied from a portable generator, inverter,
RV generator, fuel cell or any standby source
capable of producing sufficient current to operate the desired load. Uses standard grounded
extension cord. (2-2-2602)
134.99
15 ft. 30A. 125 volt. (4-2-5166)
Power Inlet Box
The raintight NEMA 3R power inlet box
is designed for the use with the Pro/Tran
transfer switches and Reliance Panel/Link
manual transfer panels and generator ready
load centers. The power inlet box may be
installed indoors, or outdoors in an open area
where the generator is being used. Using
one of the four combination 1/2 inch and 3/4
inch knockouts the power inlet box can be
wired directly to the transfer switch or panel.
(2-2-2603)
74.99
141
Power-Out
Power Failure
Alarm & Safety Light
Plug this alarm into any 120 volt outlet
and turn the switch to "armed". If the power fails the alarm will emit an alarm-clocklike tone, and will automatically light up.
It can them be removed from the outlet
and used as a powerful LED flashlight for
up to 6 hours. Built-in rechargeable NiMH
battery. CSA certified. (2-2-2604)
26.99
Appliance
Load Tester
Only tester of its kind to give you
a quick digital readout in Amps
or Watts used by any plug-in appliance. Eliminates the need for
expensive clamp-on meters and
line splitters. Perfect for setting
up a portable generator for home
standby. UL listed. (2-2-2608)
40.99
JB WELD
J-B Plastic
Bonder Syringe
Genuine J-B Weld
2 piece cold weld epoxy set contains 1 fl. oz. of
steel-reinforced epoxy and 1 fl. oz. of hardener.
This versatile cold weld set can help repair everything from damaged welds and solders to precious
heirlooms. 4-minute set time and 15-hour cure
time. (2-5-3414)
8.99
J-B Quick Weld
Fast, strong bond. Quick
cure time. Non toxic
formula. 4 minutes to set
and 4-6 hours to cure.
(2-5-3415)
9.99
J-B Weld Stick
2 oz. Steel reinforce putty
stick. Hand kneadable epoxy
adhesive. Cures in 60 minutes, can be drilled, sanded,
filed, tapped, machined and
painted. (2-5-3600)
9.99
J-B Industro Box
21.99
Two five oz. tubes. (2-5-3601)
Thread Lock
7.99
6 ml. Blue or red. (2-0-1905/1906)
Strength is 3770 psi. Set time is
15 minutes. Sands in 30 minutes.
Body panel adhesive, filler and
sealer. Great for filling dents,
general repairs and replacement
bonding of plastics. Will repair
polyurethane and polypropylene
plastics. (2-0-1946)
10.99
Kwik Weld
Epoxy Syringe
25 ml. Strength is 2424 psi. Set
time is 6 minutes. Cure time is
4-6 hours. Quick setting steel reinforced epoxy. Easy to use. Great
for household repairs, automotive,
plumbing, crafts and more. Waterproof, petroleum, chemical and
acid resistant formula. No clamping necessary. (2-0-1947)
10.99
Plastic Weld
Epoxy Syringe
Clear Weld
Epoxy Syringe
9.99
9.99
25 ml. Strength is 3200 psi.
Set time is 5 minutes. Cure
time is 1 hour. Quick setting
epoxy. Multi purpose use.
Can use it on glass, most
plastics, tile, ceramic, wood
and more. (2-0-1944)
Evapo-Rust
Super safe rust remover. Water soluble. Ph
neutral. Reusable. Biodegradable. Non toxic
and non corrosive. Ready to use. No acids,
VOC's or fumes. Safe on skin and eyes.
Removes rust to bare metal.
11.99
27.49
32 oz. (2-0-1941)
1 gallon (2-0-1942)
Rust Block
16 oz. spray bottle. Water based rust inhibitor. Economical.
Protects up to 6 months. Safe for all types of metal. Biodegradable. Easy to use. No foul odors or fumes. (2-0-1948)
10.49
142
25 ml. Strength is 3200 psi. Set
time is 5 minutes. Cure time is 1
hour. Great for household repairs
and automotive. Multi purpose.
Use on fiberglass, glass, vinyl,
PVC, ABS and most hard
plastics. (2-0-1945)
Krazy Glue
2.99
(4-8-1552)
PL Premium
295 ml. Polyurethane construction adhesive. Safe for indoor or
outdoor application. (4-8-1624)
6.99
Mono Foam
420 gm. Ideal for insulating, sealing
and filling spaces around doors, windows foundations etc. Easy to apply.
Paintable. (4-8-2076)
9.99
Gorilla Glue
2 oz. The toughest glue on
planet earth. Holds wood,
stone, metal, ceramic and
more. (4-8-1670)
Gorilla Duct Tape
1.88" x 35 yards. Double thick
adhesive, strong reinforced backing and a tough all weather shell.
(4-8-1889)
No More Nails Adhesive
177 ml. A premium quality, latex based adhesive
for interior construction and multi-purpose use.
The product goes on white and dries clear as it
cures for flawless results. (4-8-1632)
9.99 14.99 7.99
White Caulking
Silicone
2.79
300 ml. tube. (4-8-2077)
Window and door in white or
clear. Kitchen and bath in white,
or clear. (4-0-4650-4652/4654)
5.49
Great Stuff
Gaps & Cracks
Great Stuff Big
Gap Filler
6.99
6.99
454g. Insulating foam sealant.
Expands to fill, seal and insulate.
For gaps greater than 25 mm.
(4-0-4682)
454g. Insulating foam sealant.
Expands to fill, seal and insulate.
For gaps greater than 25 mm.
(4-0-4684)
143
Great Stuff Window & Door
454g. Insulating foam sealant. Seals the opening between a window or door frame and its rough opening.
Proven not to bend or bow framework, when applied
properly. (4-0-4686)
7.99
POWER TOOLS
Reciprocating Saw
119.99
9 amps. Tool-less blade change system. Soft rubber
grip. External brush maintenance. (4-8-7278)
3/8" Drill
36.99
3.3 amps. 3/8" keyless chuck. Forward/reverse
switches. 2 year over counter warranty. (4-9-6310)
Reciprocating Saw
139.99
Powerful 9.0 amps. Keyless blade clamp. Variable
speed. Kit box. (4-2-2304)
3/8" Drill
Powerful 7 amp motor gives the user the
power to get the job done. Compact design. Light
weight design. Variable speed trigger switch. Lockon switch reduces fatigue. (4-9-6169)
64.99
1/2" Drill
189.99
Rubber grip. Rocker switch. Ball bearing
construction for longer life. (4-9-3871)
1/2" Drill
Variable speed reversing switch.
550 rpm. 9.0 amps. Soft grip handle.
(4-9-4014)
189.99
Prices: Due to current market
conditions, the prices in this catalogue
are subject to change without notice.
1/2" Hammer Drill
99.99
Keyless chuck. Comes with case. Swivel grip
handle. Soft rubber grip. (4-9-6305)
1/2" Heavy Duty Impact Wrench
7.5 amp. 2100 rpm. 240 ft./lbs. max. torque. Ball bearing construction. Die cast aluminum gear housing. AC/DC rocker switch. 1/2"
anvil with hog ring. (4-8-7243)
249.99
144
POWER TOOLS
5" Angle Grinder
4-1/2" Angle Grinder
79.99
AC/DC switch. Powerful 10 amp, 10,000 rpm motor. Shaft lock for easy
wheel changes. Powerful, lightweight motor for high production work and
less fatigue. All ball bearing construction. Removable side handle can be
installed on either side. Double insulated. (4-2-3026)
7 amp. 11,000 rpm. Quick change wheel release.
(4-8-8990)
159.99
7" Angle Grinder
194.99
Tool less wheel cover. Light weight. Large trigger switch.
Low noise. Low vibration. (4-8-9000)
5" Angle Grinder
154.99
13 amp motor. 5" and 6" keyless guard. Quick
change wheel. (4-8-8997)
Prices: Due to current market
conditions, the prices in this catalogue
are subject to change without notice.
Cutting Disc
Metal cutting.
4-1/2" x .045 x 7/8"
3.69
3.89
(4-8-8572)
5" x .045 x 7/8"
(4-8-8573)
14" Cut Off Wheel
Cut Off Wheels
11.99 7.99
8.99
11.99
(4-8-8542)
12" (4-8-8165)
14" (4-8-8166)
16" (4-8-8167)
145
18 Volt 4-1/2" Cut Off Bare Tool
134.99
6500 rpm. (4-9-3641)
AC/DC Job Site
Radio & Charger
2 AC power outlets. USB and auxillary plug ins.
2 AC power outlets. Built in quick charger for
12 volt and 20 volt batteries. Powerful full range
sound. (4-9-3691)
204.99
18 Volt 6-1/2" Circular
Saw Bare Tool
134.99
3700 rpm. (4-9-3640)
18 Volt Bare Tool Grease Gun
Powerful motor delivers 9,000 max psi to power through
clogged grease fittings. High volume pump pushes up to 5.0
oz/min high flow applications. Variable speed trigger. 42" extra
long and flexible hose. (1-3-0104)
219.99
18 Volt 1/2" Impact
Gun Bare Tool
139.99
(4-9-3671)
139.99
146
149.99
Keyless blade change. Variable speed. (4-9-3643)
Prices:
Due to
current market
conditions, the
prices in this
catalogue are subject
to change without
notice.
18 Volt XPP Batteries
2 pack. (4-8-7550)
18 Volt Jig Saw Bare Tool
Dual Port 18 Volt & 20 Volt
Charging Station
124.99
Adjustable dust blower. Variable speed 0-3000
spm. Anti slip comfort grip. (4-8-7596)
20 Volt Max 6-1/2"
Circular Saw Bare Tool
20 Volt Max Lithium Ion
1/4" Impact Driver Bare Tool
169.99
134.99*
Powerful 460 mwo, 3700 rpm motor. 0 – 50
degree bevel capacity. 6-1/2 carbide tipped
blade. (4-9-3685)
Compact 5.55" design. Three LED lights. One handle
loading. 1/4" hex chuck accepts 1" bits. Belt hook
included. (4-9-6634) Reg. 147.99
*Sale ends
May 28th
20 Volt Max 4-1/2"
Cutoff Bare Tool
6500 rpm motor for cutting and grinding applications.
Tool free wheel changes and guard adjustments. Two
finger trigger switch. (4-9-6628)
166.99
20 Volt Max Lithium Ion 1/2"
Impact Wrench Bare Tool
Compact, lightweight design fits into t
ight areas. Anti-slip comfort grip.
(4-9-6632)
166.99
20 Volt Max Lithium Ion
Cordless Jig Saw Bare Tool
All metal lever action. Keyless blade change. All
metal keyless shoe bevel. 4 position orbital action.
Adjustable dust blower. Variable speed 0-3000 spm.
Anti slip comfort grip. (4-9-3684)
189.99
20 Volt Max Lithium Ion
Reciprocating Saw Bare Tool 20 Volt Max 3/8" Right
4 position blade clamp. 1-1/8" stroke length. Variable
Angle Drill Bare Tool
speed trigger with 0-3000 spm. Pivoting adjustable
169.99
shoe. (4-9-3677)
Dual speed ranges (0-650/0-2000) rpm for
user flexibility. Compact for tight spaces.
Multi grip trigger. (4-9-6626)
147.99
20 Volt Max Lithium Ion 1/2"
Impact Wrench Bare Tool
300 ft. lbs. of max torque. Variable speed trigger.
LED light for increased visibility. All metal
transmission. (4-9-6629)
209.99
2 Pack 20 Volt Max
Lithium Ion Batteries
20 V Max Lithium Ion
Grease Gun Bare Tool
174.99
4.0 amp hour run time. (4-9-3686)
10,000 max psi. High volume pump pushes
up to 5.0 oz./min. Up to 16 cartridges per
charge. Variable speed trigger. 42" extra
long and flexible hose. (1-3-0105)
224.99
147
BARE TOOLS
M18 Cordless Lithium-Ion 4-1/2"
Cut Off/Grinder Bare Tool
M18 1/2" High-Torque
Impact Wrench Bare Tool
18 volt. Superior electronics and performance deliver more
work per charge. Variable speed trigger. 1/2" anvil with
detent pin to ensure maximum socket retention. (4-9-6661)
219.99
18 volt. Overload protection prevents damage to the tool. Debris baffles keep
debris from entering the tool and damaging components. The only cordless
cut-off/grinder in the market with a paddle switch design. (4-9-6660)
169.99
M18 Cordless Lithium-Ion
5-3/8" Metal Saw Bare Tool
18 volt. Compact, low profile design for easy handling
and increased control. Extra large cut guide. LED light for
more accurate cuts. (4-8-7287)
M18 2 Pack Battery
149.99
30 minute charge time. 1.5 hour run time. (4-9-3697)
194.99
M18 LED Flood Light Bare Tool
The Milwaukee® M18™ LED flood light delivers up to
30% brighter light output than corded 250w halogen lights.
Roll cage design and impact resistant. Stands up to the
toughest working conditions. Versatile hanger provides
hands free use in a variety of applications. (4-9-3700)
124.99
Sawzall M18 Cordless Lithium-Ion
Reciprocating Saw Bare Tool
164.99
18 volt. Patented gear-protecting clutch extends the life of the tool. Variable speed trigger.
The Quik-Lok™ blade clamp provides quick and efficient blade changes. (4-9-3695)
148
POWER TOOLS
10" Sliding Compound Mitre Saw
10" Sliding Compound Mitre Saw
499.99
219.99
15 amp motor. Compound cuts (mitre & bevel) 45 degrees left. Twin laser.
(4-8-8339)
Dual level left & right. Electric brake and soft start.
Battery operated laser guide system with on/off switch.
Soft rubber grip. Safety switch. (4-8-8329)
ALSO
Available
Online
7-1/4" Circular Saw
119.99
10.5 amp. Low noise operation. Light
weight. (4-8-8337)
14" Chop Saw
AC/DC switch. 3800 rpm. 15 amps. Quick
release clamp. Lock off button. Adjustable
depth stop. 45º angle cuts. (4-8-8387)
219.99
14" Chop Saw
224.99
15 amp 4 HP motor. Horizontal "D" handle.
Quick release vise. (4-8-7255)
ALSO
Available
Online
Prices:
Due to current market
conditions, the prices
in this catalogue are
subject to change
without notice.
3 Way Roller Stand
Deluxe Miter Saw Stand
139.99
330 lbs. capacity. 8" rubber wheels.
Integrated 3 outlet power bar. (4-8-9979)
Adjustable from 26" to 44" height. Eight
5/8" roller balls. Flat support bar and 113/4" single roller bar. (4-9-6670)
41.99
149
POWER TOOLS
20 Volt Max Compact
Drill Driver Kit
Comes with 2-20 volt lithium ion batteries, charger and kit box. Compact
and light weight with ergonomic handle. Perfect for both drilling and
driving. (4-9-6627) Reg. 224.99
189.99*
Drill Doctor
99.99
Makes dull bits like new. Sharpens
a wide variety of bits. (4-9-3612)
*Sale ends May 28/16
Multi Purpose
Electric Sharpener
Multi purpose sharpener sharpens drill bits,
knives, scissors, straight chisels and plane
blades. Quiet and efficient 96W motor. Kit
comes with durable diamond sharpening wheel,
knife and scissor guide, drill bit guide, chisel
and plane blade guide attachment. (4-2-2316)
69.99
8" Bench Grinder
99.99
3/4 hp. 3400 rpm. Direct drive motor.
Adjustable tool rest. (4-8-8252)
Floor Drill Press
Service Cart
16 speeds. 13" swing. 5/8" chuck. 7.5
amp motor. 45º max table tilt. Locking
depth stop. (4-8-7221)
349.99
99.99
3 tray. 200 lb. capacity. 4" caster wheels.
(4-0-2610)
Prices: Due to current market
conditions, the prices in this catalogue
are subject to change without notice.
150
Wet/Dry Vacs
Micro Shop Vac
Mini Air Mover Shop Vac
49.99
Easy, lightweight wet/dry pickup. Comes with
wall bracket and accessories. (4-9-3675)
Designed to quickly dry wet carpets and floors,
with a second and third position for drying walls
and ceilings. (4-9-3692)
79.99
18/20V MAX Cordless Wet/Dry Vacuum
18.9 Litre Shop Vac
Cordless operation powered by 18v or 20v battery. Washable/reusable
filter. Heavy duty, crush resistant. On board hose and accessory storage.
2 gallon tank capacity. (4-9-3693)
129.99
4.5 peak H.P. Stainless steel tank. This rugged vac features a caster
dolly for easy maneuvering . Convenient rear storage, built into the
vac head keeps your tools organized. Rear blower port instantly
converts vac into powerful blower. (4-9-3386)
99.99
WATER DRINKING SYSTEM
Undersink Water
Drinking System
Rainfresh Water
Filtration Cartridges
4.99 - 9.99
High performance undersink water
filter. Reduces lead, VOC, THM,
cyst, chlorine, taste, odor and
sediment. Easy cartridge change
–simply grab and twist off/on.
Includes chrome faucet. (4-8-2136)
(4-8-2012/2013/2050)
89.99
151
HARDWARE
36.99 39.99
Fibreglass Tape Measure
200ft./60m. (4-8-6908)
74.99
Propane Torch Kit
(4-0-6014)
Digital Angle Level
LCD display. Hold button to lock angle.
9 volt battery included. (4-7-5655)
2 Piece 18" Magnetic
Bar Tool
For garage or shop. Holds metal tools and
items in place for easy storage and access.
(4-8-6102)
14.99
5 Piece Pry &
Wrecking Bar Set
22.99
(4-8-6319)
24" Aluminum
Contractor
Combination Square
Metric and inch graduations. Use as a
square, height gauge, depth gauge, ruler,
level etc. (4-7-5641)
19.99
39.99
24" Magnetic Sweeper
(4-1-0109)
2" x 4" Clamp
Metal construction. Works with any 2" x
4". Eliminates the need to carry around bar
clamps or pipe clamps. (4-9-4075)
31.99
19.99
16 Piece Hole Saws
(4-1-1130)
152
HARDWARE
4 Piece Pipe Wrench Set
39.99
Torque Wrench
15 Piece Hole Saw Set
Includes hole saws from 3/4" to 3", UNF hole
saws arbors and 12" extension. (4-1-1132)
53 Piece SAE/Metric
Tap-Die Set
6 Piece Jumbo Wrench Set
8 Piece Jumbo Drill Bits
49.99
8", 10", 14" & 18". (4-0-3102)
Complete with case. Dial in torque setting up to 150
ft./lbs. Reversing ratchet. 4 piece set. (4-0-2502)
69.99
79.99
(4-8-5495)
99.99
79.99
1/2" shank. 9/16", 5/8", 11/16", 3/4", 13/16",
7/8", 15/16", 1". (4-8-7078)
(4-8-5601)
2"
1-7/8"
1-3/4"
6
piece
12 Piece Punch
& Chisel Set
29.99
(4-8-9785)
Ideal For
Drill
Presses
1-5/8"
1-3/8"
1-1/2"
60 Piece SAE/
Metric Socket Set
79.99
(4-8-5529)
153
HARDWARE
14 Piece Combination Wrench Set
44.99
16 Piece Metric Wrench Set
15 Piece Deep Impact Socket Set
4 Piece Adjustable
Wrench Set
220 Piece
Drill Bit Set
3/4" Drive Socket Set
Sizes 3/8" to 1-1/4". (4-2-5600)
54.99
Chrome vanadium steel. 1 case. 14
sockets. 3/8" to 1-1/4". (4-9-1764)
44.99
8mm to 32mm. (4-8-5632)
26.99
(4-8-5516)
Titanium coated. 21 of the most
used drill bit sizes included.
Comes with metal case.
(4-1-0602)
99.99
15 Piece Shallow Impact Socket Set
29 Piece Titanium Drill Bits
89.99
38.99
Chrome vanadium steel. 1 case.
14 sockets. 3/8" to 1-1/4". (4-9-1763)
21 piece set. SAE or Metric. (4-6-1532/1540)
39.99
Most popular sizes. High quality construction. (4-8-7098)
Prices: Due to current market
conditions, the prices in this catalogue
are subject to change without notice.
154
HARDWARE
4 Piece Aligning Bars
Hardened steel. Rolling head for
maximum leverage. Tapered tips.
(4-0-3100)
19.99
Digital
Measuring Wheel
8” diameter wheel. Includes
extendable handle and kickstand.
Both imperial (feet) and
metric display. Carry case included.
(4-1-0010)
39.99
12 Piece Punch & Chisel Set
23.49
(4-5-8304)
Work Sharp Knife &
Tool Sharpener
129.99
Ideal for scissors, knives, lawn mower
blades and shop tools. (4-2-2310)
3 Piece Extra
Long Ratchet Set
99.99
1/2", 3/8" and 1/4" drive.
Flex head. (4-0-1219)
3 Piece Step Drill Bit
High speed steel with titanium finish.
Drill multiple sizes with each bit. 28
hole sizes in 3 bits. With 3 bits you can
almost replace 27 drill bits. (4-9-0369)
5 Piece Pry Bar Set
21.99
6" - 24'. Hardened plastic grip. Pivoting
head alignment bar. (4-5-8011)
Digital Caliper
New fractional read out. Instant
imperial/metric conversion.
(4-7-5345)
26.99 24.99
Measures
In
Fractions
2 Pack 10" Saw Blades
29.99
Carbide tip. 28 and 60 tooth. (4-8-9813)
25 Piece Multi Tool Kit
64.99
6 Piece Roll Pin Punch Set
12.99
(4-5-8308)
Variable speed 15,000 – 22,000 rpm. Ideal for
sanding, sawing and scraping. (4-2-2306)
155
HARDWARE
14 Lb. Post Maul
49.99
Comes with 36" handle. (4-8-6645)
36" Bow Saw
19.99
(4-9-4434)
12 Lb. Crowbar
26.99
51" long. (4-8-6564)
3 Lb. & 8 Lb.
Sledge Combo
44.99
(4-8-6634)
12" Hacksaw
39.99
(4-8-5138)
5 Piece Ball Pein Hammers
41.99
Fibreglass handle. 8 oz., 12 oz., 16 oz., 24 oz. and
32 oz. (4-6-3087)
Prices: Due to current market
conditions, the prices in this catalogue
are subject to change without notice.
156
6 Lb. Splitting Maul
29.99
Fibreglass handle. (4-8-5124)
15" Fat Max® Hand Saw
Uses three cutting surfaces to cut 50% faster. Induction
hardened teeth stay sharp up to 5 times longer. Back of
saw can be used to mark 45º and 90º angles. (4-8-5590)
27.99
2 Piece Hammer
Combo
24.99
Fibreglass handle. 3 lb. sledge and 3 lb.
cross pein. (4-8-6633)
HARDWARE
Automatic Wire Stripper
10.99
(4-8-5974)
Heavy Duty PVC
Pipe Cutter
14.99
(4-8-6329)
7 Piece Brush Wire Grinder Set
24.99
(4-1-1200)
39.99
Chain holds and locks around any shape or size. (4-8-5837)
Heavy Duty Bolt Cutter
10-1/4" Fencing Pliers
24.99
41.99
18" (4-1-0679)
Vise grip. Nickel chromium steel for extra
strength and durability. Lifetime warranty.
(4-0-2515)
22.99
30"
Heavy duty cutter.
Adjustable. (4-1-0682)
5 Piece Vise Grip® Clamp Set
89.99
Locking Chain Clamp Vise Grip
Contains two 11R "C" clamps, two 6R "C" clamps and
one 10R locking pliers. (4-8-6091)
Fast Release 10" Vise Grip
Release is controlled and can be operated with one
hand. More finger room better accommodates large
hands and professionals like welders who wear
gloves. Elimination of trigger means no pinching
during release. (4-9-0343)
19.99
157
One Hand
Fast
Release
12" Groove Lock Pliers
29.99
Comfort grip. Easy slide adjustment. All
purpose jaw. Flat, square and hex. (4-9-0344)
HARDWARE
Quick Vise
6" Bench Vise
39.99
Other Sizes Available.
Measuring only 11.5" long and 4/75" tall.
Allows the user to slide not crank the vise into
place. Aluminum body for durability. Ideal for
DIY and hobbyist projects. (4-0-1255)
Saw Guide Protractor
14.99
Angle measurements and cut made
easier. (4-9-6680)
72" I-Beam Level
54.99
(4-9-0353)
5 Piece Measuring Set
139.99 19.99
Swival Base. (4-0-1256)
Staple Gun
24.99
(4-2-7450)
(4-5-1628)
All Terrain Gel Knee Pads
44.99
Cap transfers pressure away from the kneecap. Moves with
your knee for all day comfort. Removable cap. (4-9-4345)
18 Inch Open Top Tool Carrier
Open design. Comes with collapsible bar handle for
easy access. 18 exterior pockets and 16 interior pockets.
Adjustable non-slip padded shoulder strap and padded bar
handle make carrying more comfortable. (4-9-3516)
99.99
Tools not included.
19 Pocket Framer's Combo
Apron With Suspenders
109.99
Heavy duty poly and ballistic poly fabric construction.
Fully adjustable padded suspenders. (4-9-3515)
Tools not included.
Prices: Due to current market
conditions, the prices in this catalogue
are subject to change without notice.
158
STORAGE
Heavy Duty Shelving
Shelving Unit
53"w x 24"d x 72"h.
219.99
239.99
5 shelf. 36" x 18" x 72". Ideal for
household and garage storage.
Sturdy construction. (4-5-8185)
99.99
(4-5-8158)
77"w x 24"d x 72"h.
(4-0-2664)
ALSO
Available
Online
5 Layer Steel Workshop Shelving Brackets
Free Standing Vertical Rack
47.99
164.99
2 pack. Store a variety of materials including lumber, moldings, pipes, PVC and
more. Provides 5 levels with a capacity of 110 lb. (50 kg.) per level. Easy to
install. (4-0-2662/4-8-2844)
37" wide. Vertical arm spacing 24". Arm length
at 7". 1000 lbs./450 kg. weigh. Bearing evenly
distributed. (4-0-2663)
Prices: Due to current market
conditions, the prices in this catalogue
are subject to change without notice.
Storage Bin Rack
169.99
32 small bins and 15 large bins.
35" x 11" x 45". (4-8-9718)
Hand Truck Dolly
Height 50-1/2". All steel 1" diameter, 14 gauge tubular
construction. 10 x 3-5/8" pneumatic tires with steel ballbearing. Rating - 600 lbs. Lifetime warranty. (4-0-2596)
49.99
ALSO
Available
ALSO
Available
Online
Online
159
Heavy Duty Bolt Bin
249.99
72 compartment. Fully hemmed lips.
(2-0-0443)
TOOL BOXES
3 Piece Tool Box
Combo
26". Includes 4 drawer chest, 2 drawer
intermediate chest and 5 drawer cabinet.
70 lbs. ball bearing drawer slides. Internal
locking mechanism. (4-8-9977)
Portable Tool Box
599.99
ALSO
Available
Online
26". Black or aluminum. Heavy duty
aluminum construction with welded seam
and no spot welding. Weather stripping
and gas springs. Hold either metric or SAE
tools. 27-1/8"w x 18-1/2"h x 17-1/2"d. (4-89908/9909)
549.99
ALSO
Available
Tools not included.
Online
41" Tool Storage Combo
Black. Aluminum trimmed raised and release drawer pulls.
100 lbs. ball bearing drawer slides. Dual set of drawer
slides on large drawers. Coded tubular lock and keys.
8 Drawer Chest 40-7/8"w x 22-1/4"h x 17-3/4"d.
(4-8-9978)
569.99
749.99 Available
ALSO
6 Drawer Side Cabinet
15-3/4"w x 34-3/4"h x 18-1/8"d. 16".
Aluminum trimmed raise and release drawer
pulls. 100 lbs. ball bearing drawer slides.
Dual set of drawer slides on large drawers.
Coded security lock and keys. Black or
stainless steel. (4-8-9989/9990)
11 Drawer Cabinet 41-1/2"w x 41-1/4"h x 18-1/8"d.
349.99
(4-8-9980)
Online
41" Stainless Steel
Cabinet And Chest
8 Drawer Mechanics Chest
549.99
Ball bearing drawer slides opens easily.
41"w x 18"d x 21"h. (4-8-9559)
11 Drawer Roller Cabinet
Ball bearing drawer slides open easily.
Large 5" x 2" casters. 41"w x 19"d x 41"h.
(4-8-9560)
779.99
5 Year Warranty
ALSO
Available
Online
160