Model: ECL

OWNER'S MANUAL
PLEASE READ CAREFULLY BEFORE USING AND KEEP WELL.
7" DIGITAL WATERPROOF LCD MONITOR
FOR HEAVY DUTY INDUSTRY
Model: ECL-750QWP
Design and Specifications are subject to change without notice.
r
OWNER'S RECORD
Model No. ECL-750QWP
Serial No.
WARNING
No!
2
r
SUGGESTIONS
7" DIGITAL WATERPROOF LCD MONITOR
FOR HEAVY DUTY INDUSTRY
1 Safety
- Use only DC 10V ~ DC 32V.
- In case that dust or liquid was soaked into the case, please turn off
power and consult an experienced technician before using.
2 Installation
- Do not install the unit in an extremely hot or humid place
(radiator, air duct, etc.) or in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
- If your vehicle has been parked in direct sun light resulting in
a considerable rise in temperature inside the vehicle, allow the unit
to cool off before operating.
3 General cleaning information
- Clean the unit with a slightly damp soft cloth.
Use a mild household detergent.
Never use strong solvents such as thinner or benzine as they
might damage the finish of the unit.
3
r
FEATURES
- Water Resistance (IP68)
- 7" Digital LCD Wide Panel
- Auto NTSC/PAL Detection
- Auto DAY/NIGHT Detection
- Multiple display modes (SINGLE, SPLIT, TRIPLE, PIP, QUAD)
- Adjustable Speed switch
- Vandal Resistance (Al Housing)
- Support Various Divide Modes
- Parking Distance Marker Setting Available
- Capacitive Touch Key
- Support Multi-Functional Camera (CAM1 &CAM2):
Normal/Shutter/Tilt
r
PACKAGE CONTENTS
Please check that you have the correct contents before using this product.
If any items are missing, please contact your dealer.
(SCREW TYPE)
OR
(RAIL TYPE)
ECL-750QWP MONITOR
SUN VISOR
STAND BRACKET
OPTIONAL
OWNER'S MANUAL
PLEASE READ CAREFULLY BEFORE USING AND KEEP WELL.
MULTI CONTROL BOX
FOR REAR VISION MONITOR
or
4P IP TYPE
CAMERA CONNECTOR
4P DIN TYPE
CAMERA CONNECTOR
POWER CORD
Model: ECL-750QWP
Design and Specifications are subject to change without notice.
SCREW KITS
4
INSTRUCTION
MANUAL
r
OPERATIONS
1
2
3
4
1
POWER
2
SELECT
3
MENU
4
UP
5
DOWN
6
DAY/NIGHT SENSOR
(CDS)
1
6
POWER
2 NOTE
2
5
to turn the monitor on.
Touch
to turn the monitor off.
Monitor start mode will follow “AUTO POWER SETTING”
SELECT
SEL
3
Touch
Touch SEL
to select CAMERA.
Touch SEL
to select the option in SET UP MENU.
MENU
MENU
Use MENU to enter Display Menu(Short key) and
Main Menu(Long key).
Touch once to enter menu mode.
Touch again to exit from menu mode.
Selectable OSD Menu Disappears within 7 sec if there’s
no new button pressed.
Touch menu button over 2 sec to go back to main menu
from submenu.
5
r
4
OPERATIONS
UP
5
DOWN
While in Menu mode
and
navigate though
the available menu options.
Touch
to adjust Bright, Contrast, Color, Tint
Volume and other setting values.
6
DAY/NIGHT SENSOR
Automatic Brightness Control
The brightness of the monitor is adjusted automatically
with the DAY/NIGHT SENSOR accordingly to the circumstance.
6
r
OPERATIONS
. DISPLAY MENU
SEL
MENU
MENU
UP / DN
SELECT
Short Key
(more than 0.5 sec)
DISPLAY
SEL
UP / DN
DN
SELECT
Option setting
MENU
BRIGHT
30
(0~60)
BRIGHT
30
CONTRAST
30
COLOR
30
TINT
30
30
CONTRAST
(0~60)
30
COLOR
(0~60)
NTSC MODE
PAL MODE
30
TINT
(0~60)
*
7
TINT
menu is displayed in NTSC only.
r
OPERATIONS
. SETUP MENU
Touch M E N U b u t t o n f o r a w h i l e (over 2 sec) to enter MAIN MENU.
Selectable OSD MENU disappears within 7 sec if there is no new button pressed.
A
MAIN MENU
1.
2.
3.
4.
5.
6.
7.
SEL
MENU
MENU
UP / DN
long k ey
(more th a n 2 s ec)
SELECT
up / down shifting
option setting
CAMERA SETTING
TRIGGER SETTING
SPLIT SETTING
SPEED SWITCH
DAY/NIGHT SETTING
AUTO SCAN SETTING
ADVANCED MENU
1 CAMERA SETTING
1. CAMERA
SETTING
C A M 1 SUBDIVISION MENU
C A M 2 NOR/MIR : [MIRROR;NORMAL]
C A M 3 UP/DOWN : [U P ; D O W N ]
CAM4
AUX
NAME:[CAM1
]
SORT:[NORMAL;SHUTTER;
TILT.AT;TILT.MT]
SUBDIVISION MENUU
SUBDIVISION MENU
A
SEL
SEL
BRIGHT
30
CONTRAST
30
COLOR
30
MENU
SEL
SELECT
UP / DN
SELECT
UP / DN
SELECT
UP / DN
selecting
shifting
option setting
shifting
option setting
shifting
2 NOTE
MENU
exit
SUBDIVISION MENU can control BRIGHT, CONTRAST and COLOR
for individual channels (CAM1~4,AUX)
8
r
OPERATIONS
NOR/MIR : [MIRROR;NORMAL]
2 NOTE
Normal/Mirror image can be switched (CAM1~4;AUX)
UP/DOWN : [UP;DOWN]
2 NOTE
Up/Down image can be switched (CAM1~4;AUX)
NAME : [CAM1
]
SEL
SELECT
selecting
2 NOTE
UP / DN
CAM1,CAM2
A
SEL
UP / DN
SELECT
shifting option setting
UP / DN
name setting
SEL
MENU
SELECT
MENU
shifting
exit
Can give each camera name.
SORT:[NORMAL;SHUTTER;TILT.AT;TILT.MT]
A
CAM1,CAM2
UP / DN
SEL
MENU
SELECT
UP / DN
SELECT
MENU
selecting
shifting
option setting
exit
SEL
2 NOTE
Select camera type between NORMAL, SHUTTER, TILT AUTOMATIC or TILT MANUAL.
How to control TILT MANUAL:
Select “TILT.MT”. Get out from MENU.
Press MENU key two times and you can see below OSD.
TILT CONTROL:
Press
key for TILT UP.
Press
key for TILT DOWN.
9
r
OPERATIONS
2 TRIGGER SETTING
2. TRIGGER
TRIGGER1
TRIGGER2
TRIGGER3
TRIGGER4
TRIGGER5
SOURCE:[CAM1~4;AUX;SPLIT1~3;SKIP]
SETTING
SOURCE:[CAM1~4;AUX;
SPLIT1~3;SKIP]
DELAY:[0~20sec]
Trigger1~5
A
UP / DN
MARKER:[ON;OFF]
SEL
SEL
MENU
MARKER SETTING
SELECT
SELECT
MENU
option setting
exit
selecting
User can use 5 triggers and each trigger source(CAM1~4;AUX;SPLIT1~3;SKIP) can be selected.
When the trigger is activated, the selected source’s image is displayed.
DELAY:[0~20SEC]
Each trigger's delay time is adjustable from 0 sec to 20 sec.
2 NOTE
Trigger1~5
If one camera is activated
by an intermittent signal
( e.g. from an indicator light’s )
the delay must be activated to
prevent the picture from flickering.
SEL
MENU
SELECT
MENU
SEL
SELECT
UP / DN
selecting
shifting
option setting
MARKER:[ON;OFF]
UP / DN
A
SEL
MENU
SELECT
MENU
SEL
UP / DN
selecting
shifting
option setting
LEFT-RIGHT
UP-DOWN
WIDTH
LEFT-RIGHT
UP-DOWN
WIDTH
LEFT-RIGHT
UP-DOWN
exit
MARKER SETTING
A
SEL
SEL
SELECT
UP / DN
selecting
shifting
exit
ON
Trigger1~5
SELECT
UP / DN
A
SELECT
selecting
MENU
SEL
UP / DN
shifting
SELECT
option setting
10
UP / DN
MENU
selecting
exit
r
OPERATIONS
3 SPLIT SETTING
3. SPLIT SETTING
SOURCE1~4:[CAM1~4;AUX;OFF]
AUDIO:[CAM1~4;AUX;OFF]
S P L I T 1 SOURCE1:[CAM1~4;AUX;OFF]
S P L I T 2 SOURCE2:[CAM1~4;AUX;OFF]
S P L I T 3 SOURCE3:[CAM1~4;AUX;OFF]
SOURCE4:[CAM1~4;AUX;OFF]
AUDIO:[CAM1~4;AUX;OFF]
DISPLAY TYPE
2 NOTE
SPLIT1~SPLIT3
A
SEL
SELECT
UP / DN
selecting
shifting
UP / DN
SEL
MENU
SELECT
MENU
option setting
exit
Factory setting for SPLIT1 is SPLIT IMAGE, SPLIT2 is TRIPPLE IMAGE
and SPLIT3 is QUAD IMAGE. However, SPLIT1 ~ 3 can be changed
to desirable image type according to number of selected camera.
EX.) In SPLIT1, SPLIT IMAGE, TRIPPLE IAMGE & QUAD IMAGE can be
displayed according to selected number of camera.
SPLIT2 & SPLIT3 are same as above.
Selected camera cann't be selected in the other SOURCES.
Audio function is only avaialable on selected channel.
DISPLAY TYPE
DISPLAY TYPE
A
SPLIT IMAGE
DISPLAY TYPE
SEL
SEL
MENU
SELECT
UP / DN
SELECT
SELECT
MENU
selecting
shifting
selecting
SEL
option setting
exit
TRIPPLE IMAGE
DISPLAY TYPE
QUAD IMAGE
2 NOTE
Display type is automatically changed to SPLIT / TRIPPLE / QUAD
image according to selected number of camera.
Display type is automatically changed to first image type in
SPLIT / TRIPPLE / QUAD image in case of changing selected number
of camera.
11
r
OPERATIONS
4 SPEED SWITCH
4. SPEED SWITCH
SPEED SWITCH:[ON;OFF]
FREQUENCY:[10~1000Hz]
UNDER FREQUENCY CH:[CAM1~4;
AUX;SPLIT1~3]
OVER FREQUENCY DISPLAY:[ON;OFF]
OVER FREQUENCY CH:[CAM1~4;
AUX;SPLIT1~3]
SPEED SWITCH:[ON;OFF]
2 NOTE
Select “ON”for enter into the function.
Select “OFF”for get out the function.
FREQUENCY:[10~1000Hz]
2 NOTE
Select activated frequency 10~1,000Hz.
Pressing “SELECT”button short for 1Hz frequency steps change.
Pressing “SELECT”button long for 10Hz frequency steps change.
UNDER FREQUENCY CH:[CAM1~4;AUX;SPLIT1~3]
2 NOTE
Select channel when input lower frequency than standard frequency.
OVER FREQUENCY DISPLAY:[ON;OFF]
2 NOTE
Select “On”or“OFF” for displaying image when input higher
frequency than standard frequency.
OVER FREQUENCY CH:[CAM1~4;AUX;SPLIT1~3]
A
UP / DN
shifting
SEL
MENU
SELECT
MENU
option setting
2 NOTE1
2 NOTE2
exit
Select channel image when input higher frequency than standard frequency.
EXAMPLE OF SPEED SWITCH FUNCTION:
*The purple wire needs to be connected with the vehicle's tacho signal and via MENU the SPEED SWITCH
needs to be selected ON.
*Adjust FREQUENCY into 67Hz. At this setting (and most common used tacho signal), the selected camera
will be displayed during a speed of 0~33km/h.
*Select the concerning camera via "UNDER FREQUENCY CH:" (At different type tacho signals, the
FREQUENCY needs to be adjusted into higher or lower value than this example)
*Over 33km/h (72Hz), the selected camera will be switched OFF automatically. When the speed slows
down, then the selected camera will be switched ON automatically again at 30km/h.
Instead of automatic switch OFF at a speed over 33km/h it is also possible to activate another video source,
such as a navigation picture from an optional navigation computer. In this case, user needs to select
"OVER FREQUENCY DISPLAY: ON" and user needs to select "OVER FREQUENCY CH:"
*In case of TRIGGER activation during "SPEED SWITCH ON" mode, then TRIGGERS 1~ 5 will overrule
"SPEED SWITCH" function.
12
r
OPERATIONS
5 DAY/NIGHT SETTING
5. DAY/NIGHT SETTING
SENSOR: [ON;OFF]
SENSITIVITY:[0~60]
NIGHT BRIGHT:[0~60]
SENSOR:[ON;OFF]
2 NOTE
Select”ON”for enter into the function.
Select”OFF”for get out the function.
SENSITIVITY:[0~60]
2 NOTE
Adjust the sensitivity of day/night level
NIGHT BRIGHT:[0~60]
A
UP / DN
shifting
2
SEL
MENU
SELECT
MENU
option setting
NOTE
exit
Adjust BRIGHTNESS level.
6 AUTO SCAN SETTING
6. AUTO SCAN SETTING
AUTO SCAN:[ON;OFF]
AUTO SCAN DELAY SETTING
AUTO SCAN DELAY SETTING
AUTO SCAN:[ON;OFF]
A
UP / DN
shifting
A
shifting
SELECT
UP / DN
option setting shifting
2 NOTE
SEL
MENU
SELECT
MENU
option setting
MENU
MENU
option setting
2 NOTE
SEL
UP / DN
SEL
SELECT
exit
Select “ON” for enter into the function.
Select “OFF” for get out the function.
exit
Each channel is displayed sequential according to time in
“AUTO SCAN DELAY SETTING”.
Press “SOURCE” key for holding channel.
Selected channel is skip if you set “AUTO SCAN DELAY TIME” to “0”.
13
r
OPERATIONS
7 ADVANCED MENU
7. ADVANCED MENU
AUTO POWER:
[OFF;ON;AUTO]
FACTORY RESET
AUTO POWER:[OFF;ON;AUTO]
A
UP / DN
shifting
2 NOTE
MENU
MENU
option setting
exit
Auto Setting Monitor keeps the last setting in memory:
Monitor will start up “Power-on” mode or “Stand- by”mode according
to its last mode before the ignition key off.
Off Setting Monitor keeps “Stand- by”setting regardless of the last mode
before the ignition key off.
On setting: Monitor will be turned on automatically when ignition key on
regardless of the last mode of the monitor before the ignition key off.
FACTORY RESET
A
SEL
UP / DN
SELECT
shifting
option setting
2 NOTE
SEL
SELECT
Reset for factory setting.
14
r
INSTALLATION
1 DASH BOARD
SCREW
MONITOR
1-1. STAND BRACKET(SCREW FIXING TYPE)
1-2. STAND BRACKET(RAIL TYPE)
2 SUNVISOR
MONITOR
15
r
SYSTEM CONNECTIONS
POWER/TRIGGER WIRE FUNCTIONS
#
WIRE COLOR
DESCRIPTION
1
PURPLE
SPEED PURSE
2
YELLOW
TRIGGER5
3
ORANGE
TRIGGER4
4
GREEN
TRIGGER3
5
BROWN
TRIGGER2
6
BLUE
TRIGGER1
7
BL ACK
GROUND
8
RED
POWER IN DC (10 to32V)
REF
FUSE
CA1
CA2
CA3
CA4
4P IP TYPE
CAMERA CONNECTOR
OR
CA1
CA2
CA3
CA4
4P DIN TYPE
CAMERA CONNECTOR
VIDEO OUTPUT (YELLOW)
AUDIO INPUT (WHITE)
VIDEO INPUT (YELLOW)
CAMERA (Not supplied)
* Normal camera
* Normal / Tilt / Shutter camera
16
r
SPECIFICATIONS
Model: ECL-750QWP
Power Input
DC 10V~32V
Power Consumption
Max. 30Watt
Video System
NTSC / PAL compatible
Panel
7" Digital
Resolution
800 (H) X3(RGB) X 480 (V) pixels
Format
16:9 wide
Display Mode
Single/Split/Triple/Pip/Quad
Camera input(4CH)
Mini 4P DIN CONNECTOR or 4P IP CONNECTOR , 1Vp-p 75Ω
Operating Temp.
-30℃ ~ +75℃ ( -22℉ ~ 167℉)
Storage Temp.
-40℃ ~ +85℃ ( -40℉ ~ 185℉)
Vibration
6G
I.P Factor
IP 68
OSD Control
Day & Night Sensor
Bright, Contrast, Color, Tint
Mirror/Normal, Day/Night Mode/Scale
*Individual Control per Channel available
Dimension
194(W) X 124(H) X 30(D) mm
7.6(W) X 4.8(H) X 1.1(D) inch
Weight
Approx. 750g
Supplied acc’y
Power Cord
(1)
Screw Kit
(1)
Stand Bracket
(1)
Sun Visor
(1)
Instruction Manual
(1)
17
THIS SYMBOL MEANS DO NOT DISPOSE OF
AS MUNICIPAL WASTE.
RE-USE OR RECYCLE WHEREVER POSSIBLE.
ELECTRICAL / ELECTRONIC COMPONENTS MAY
CONTAIN SUBSTANCES WHICH ARE HARMFUL TO
THE ENVIRONMENT.
FOR ENVIRONMENTALLY SOUND METHODS OF
DISPOSAL, PLEASE CONTACT YOUR LOCAL
GOVERNMENT AUTHORITY.
18
Part no. 6MNEL750QWP-00
printed in korea
19