Shock testing facilities
Transcription
Shock testing facilities
Data sheet Shock testing facilities Deck shock machine It is imperative that equipment and systems within an operational warship have a proven reliability to operate during hostile engagements. It is essential however that any installation is fit for purpose and does not compromise other systems or endanger the crew. QinetiQ’s specialist dynamic shock test service provides the most representative method of equipment and system shock qualification for shipboard installation. Two Tonne shock machine • Specialist UK facility • Expert impartial advice • Effective & representative • Tests meet NATO & national design requirements • High Speed Footage • Instrumentation & Data Analysis QinetiQ’s shore based shock machines will replicate the initial dynamic shock loading associated with an underwater explosion thus ensuring that equipment is tested in the most representative manner. These tests can demonstrate shortcomings in the design of equipment that would not otherwise be possible. Both machines operate in accordance with UK DefStan 08-120 and NATO Stanag 4141. They satisfy • MAP 01-470 (Supersedes BR8470 & BR3021) • DefStan 08-123 Data Sheet 27 & 28 • NATO Stanag 4549 • Other Design Shock Response Spectrums (DSRS) Deck Shock Machine Two Tonne Shock Machine Simulates the shock experienced by equipment on ships’ decks and bulkheads removed from the ship’s bottom. Simulates the time and motion parameters associated with the hull and bulkhead environment of ships and submarines. The machine can be arranged to induce either vertical or horizontal motion. Rotation of the equipment allows the equipment to be tested in the other horizontal axis. The machine produces vertical motion only. However, items may be rotated and tested in the other two perpendicular axes where practical. Table size 2300mm x 1100mm Table size 2800mm x 1100mm Typical mass v. acceleration values Total Mass (kg) Vertical (ms-2) Horizontal (ms-2) 400 1000 800 800 700 500 Acceleration - 5000ms-2 up to 2000kg payload. QinetiQ Cody Technology Park Ively Road, Farnborough Hampshire, GU14 0LX United Kingdom Tel: +44 (0)8700 100942 www.QinetiQ.com Email: [email protected] QINETIQ/CF/CM/DS1200041 Copyright © QinetiQ ltd 2012 QinetiQ is a trade mark and registered trade mark of QinetiQ Limited in the EU, US and other countries.