Wrench - Proto

Transcription

Wrench - Proto

We’re out to make Work, less Work. one turn
of the Wrench at a time.
That begins with a comprehensive product line that puts the right wrench for the task in your hand.
Ours includes standard, extra long, flex-head, angle-head, box, deep offset box, ratcheting box,
obstruction, adjustable, flare nut, striking, slugging, spanner and … you get the point. Most of these
incorporate time (and knuckle) saving features like Anti-Slip Design™ technology on open ends and
TorquePlus™ drive configurations on box ends. And all wrenches are forged, polished and finished to last.
554
Wrenches
Full Polish Anti-Slip Combination Wrenches
555
enGineereD for inDustrY
Proto® offers a wide range of sizes for many types of ends, with innovations like ratcheting splines and flex-head
sockets. We also offer a wide range of angled and bent offsets to meet specific job applications.
Chrome plating to
aerospace standards
where applicable.
Anti-Slip Design locks
the fastener into place.
ASD increases the
applied force to the
flat of the fastener and
away from corners.
Precision broached for
tight tolerances.
Premium alloy
steel for strength.
finishes available
Polish Chrome
Different kinDs of offsets
Satin Chrome
Black Oxide
Black Chrome
Different kinDs of enDs
> Angled Offsets: The end lies flat with the
handle, and the end turns either left or right.
> Bent Offsets: The end is centered with the
handle, but bent.The end does not lie flat.
ratchetinG
spline
ratchetinG
open enD
box enD
flare nut
flex-heaD
> Deep Offsets: Two bends offset the handle
away from the end for better clearance.
556
Wrench
GuiDe
combination Wrenches
Same sizes of two different types.
Double box anD
open enD Wrenches
Two different sizes of the same type.
ratchetinG Wrenches
Reversables have an offset. Non-Reversables are flat.
croWfoot Wrenches
With locking extensions to reach around obstacles.
strikinG Wrenches
Hit them with a hammer. Available with flat or offset ends.
pipe Wrenches
Available in Aluminum and Cast Iron.
aDjustable Wrenches
Featuring Clik-Stop.® The wrench clicks at different sizings
so you can feel your adjustments without looking.
insulateD Wrenches
Insulated to 1000V AC or 1500V DC.
x-larGe Wrenches
For work on oversized equipment.
557
Ratcheting
Wrenches
Full Polish Combination reversible
ratCheting WrenChes - sPline
>
>
>
>
>
>
Delayed Availability
Anti-Slip Design (ASD) open end.
Smooth transition from head to shank.
Industrial strength I-Beam shank provides
broad bearing surface helping improve comfort
and helping reduce hand fatigue.
Protected switch lever helps prevent accidental reversal.
Compact ratcheting head improves access.
72-teeth provide 5° ratcheting.
Product #
JSCV08A
JSCV09A
JSCV10A
JSCV11A
JSCV12A
JSCV14A
JSCV16A
JSCV18A
JSCV20A
JSCV22A
JSCV24A
JSCV26A
JSCV28A
JSCV30A
JSCV32A
JSCV34A
JSCV36A
JSCV40A
Throat
Outside Head
Head
Outside Head
Head
Size (in) Depth (in) (B) Width (in) (C) Thickness (in) (D) Width (in) (C1) Thickness (in) (D1)
1/4
5/16
35/64
5/32
35/64
1/4
9/32
5/16
39/64
11/64
43/64
1/4
5/16
25/64
11/16
11/64
43/64
1/4
11/32
13/32
25/32
3/16
3/4
17/64
3/8
29/64
27/32
13/64
25/32
9/32
7/16
1/2
15/16
7/32
55/64
19/64
1/2
39/64
1-5/64
1/4
1
11/32
9/16
11/16
1-13/64
9/32
1-5/64
23/64
5/8
3/4
1-21/64
19/64
1-3/16
25/64
11/16
53/64
1-7/16
5/16
1-1/4
13/32
3/4
29/32
1-37/64
11/32
1-21/64
7/16
13/16
31/32
1-23/32
23/64
1-37/64
33/64
7/8
1-3/64
1-7/8
3/8
1-37/64
33/64
15/16
1-1/8
1-31/32
25/64
1-53/64
37/64
1
1-13/64
2-3/32
27/64
1-53/64
37/64
1-1/16
1-9/32
2-7/32
15/32
2-3/64
39/64
1-1/8
1-23/64
2-11/32
1/2
2-9/32
43/64
1-1/4
1-1/2
2-19/32
35/64
2-15/32
11/16
Overall Weight
Length (in) (lbs)
4-59/64
0.05
5-5/32
0.07
5-27/64
0.08
5-43/64
0.10
5-29/32
0.12
6-29/32
0.16
7-29/32
0.24
8-49/64
0.30
9-33/64
0.40
10-17/64 0.49
11-3/64
0.60
11-13/16 0.80
12-35/64 0.86
13-5/16
1.09
14-1/16
1.17
14-15/16 1.44
15-7/8
1.85
16-59/64 2.29
the storY behinD the oFFset oPen enD
A standard combination wrench gets stuck.
10 - 12° of
turning angle
The Proto® Wrench with the Offset Open End still has 10 - 12° of turning angle.
Reaching a fastener behind an obstruction is frustrating,
especially when you can reach it with the wrench, but you can’t
turn the wrench.
Rethinking the standard combination wrench allowed Proto®
engineers to discover a better way reach and turn something in
a difficult place.
558
By turning the open end to an angle, the patented Offset Open
End has an improved angle of attack onto the fastener. It can
squeeze an extra 10 to 12 degrees of turning angle when
obstructions are nearby.
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
+1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
Full Polish metriC Combination reversible
>
>
>
Size
Throat
(mm) Depth (in) (B)
6
5/16
7
5/16
8
25/64
9
13/32
10
29/64
11
1/2
12
35/64
13
39/64
14
11/16
15
23/32
16
3/4
17
53/64
18
55/64
19
29/32
21
31/32
22
1-3/64
24
1-1/8
27
1-9/32
30
1-23/64
32
1-1/2
Outside Head
Width (in) (C)
35/64
39/64
11/16
25/32
27/32
15/16
1-1/64
1-5/64
1-13/64
1-17/64
1-21/64
1-7/16
1-33/64
1-37/64
1-23/32
1-7/8
1-31/32
2-7/32
2-11/32
2-19/32
Head
Outside Head
Head
Thickness (in) (D) Width (in) (C1) Thickness (in) (D1)
5/32
35/64
1/4
11/64
43/64
1/4
11/64
43/64
1/4
3/16
3/4
17/64
13/64
25/32
9/32
7/32
55/64
19/64
15/64
29/32
21/64
1/4
1
11/32
9/32
1-5/64
23/64
9/32
1-7/64
3/8
19/64
1-3/16
25/64
5/16
1-1/4
13/32
21/64
1-9/32
27/64
11/32
1-21/64
7/16
23/64
1-37/64
33/64
3/8
1-37/64
33/64
25/64
1-53/64
37/64
15/32
2-3/64
39/64
1/2
2-9/32
43/64
35/64
2-15/32
11/16
Overall
Length (in)
4-59/64
5-5/32
5-27/64
5-43/64
5-29/32
6-29/32
7-23/32
7-29/32
8-49/64
9-9/64
9-33/64
10-17/64
10-11/16
11-3/64
11-13/16
12-35/64
13-5/16
14-15/16
15-7/8
16-59/64
Weight
(lbs)
0.05
0.07
0.08
0.10
0.12
0.16
0.20
0.24
0.30
0.34
0.40
0.49
0.55
0.60
0.80
0.86
1.09
1.44
1.85
2.29
Ratcheting
Product #
JSCVM06A
JSCVM07A
JSCVM08A
JSCVM09A
JSCVM10A
JSCVM11A
JSCVM12A
JSCVM13A
JSCVM14A
JSCVM15A
JSCVM16A
JSCVM17A
JSCVM18A
JSCVM19A
JSCVM21A
JSCVM22A
JSCVM24A
JSCVM27A
JSCVM30A
JSCVM32A
Wrenches
>
>
>
Smooth transition from head to shank.
Industrial strength I-Beam shank provides
broad bearing surface helping improve comfort
and helping reduce hand fatigue.
Protected switch lever helps prevent accidental reversal.
Compact ratcheting head improves access.
72-teeth provide 5° ratcheting.
Versatile usages on 4pt, 6pt, 12pt, spline,
Torx®, and slightly rounded fasteners.
Made in USA accurate at time of printing, consult www.protoindustrial.com for updated information.
Made in USA
Made in USA with global components
Torx® is a trademark of Acument Intellectual Properties, LLC
559
Ratcheting
Wrenches
20 PieCe reversible Combination
ratCheting WrenCh set - sPline
560
Product #: JSCV-20S
Contents
JSCV07
JSCV08
JSCV09
JSCV10
JSCV11
JSCV12
JSCV14
JSCV16
JSCV18
JSCV20
JSCV22
JSCV24
JSCV26
JSCV28
JSCV30
JSCV32
JSCV34
JSCV36
JSCV40
JSCV48
JSCV20SP
Size (in)
7/32
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-1/2
Tool Roll
Point Count
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Overall Length (in)
5
5
5-1/2
5-1/2
5-15/16
6-1/4
6-1/2
7
7-1/2
8-3/16
8-7/8
9-3/4
1-17/16
1-17/16
12-3/4
12-3/4
14-1/8
15-7/8
16-3/4
19-5/16
>
>
>
>
>
>
Black chrome finish is corrosion resistant and visually distinctive.
Fractional spline wrenches can be used on fractional
4, 6, 12 point, spline and Torx® fasteners.
The chrome-vanadium switch lever allows for easy changes
in turning direction which helps improve speed.
15° angled offset box end helps keep shank clear of obstructions.
Weight (lbs): 16.20
22 PieCe metriC reversible Combination
>
Product #: JSCVM-22S
Contents
JSCVM06
JSCVM07
JSCVM08
JSCVM09
JSCVM10
JSCVM11
JSCVM12
JSCVM13
JSCVM14
JSCVM15
JSCVM16
JSCVM17
JSCVM18
JSCVM19
JSCVM21
JSCVM22
JSCVM24
JSCVM27
JSCVM30
JSCVM32
JSCVM34
JSCVM36
JSCVM22SP
Size (mm)
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
24
27
30
32
34
36
Tool Roll
Point Count
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Overall Length (in)
5
5-1/2
5-1/2
5-15/16
6-1/4
6-9/16
6-3/4
7
7-1/2
7-7/8
8-3/16
8-7/8
9-5/16
9-3/4
11-7/16
11-7/16
12-3/4
14-1/8
15-7/8
16-3/4
18-1/8
19-5/16
>
>
>
>
>
>
>
>
>
>
Metric Spline wrenches can be used on metric 4,
6, 12 point, spline and Torx® fasteners.
Chrome-vanadium box ends and switch levers
provide high strength and durability.
Box end is countersunk for easy application to the fastener.
Spline design was created for use with speciality spline bolts which
are used when weight and size of bolt heads must be minimized.
Spline design enables the wrench to contact conventional
fasteners away from the corners, which applies force
over a larger area, reducing risk of fastener scoring and
helps prevent rounding of the corners and other fasteners
damage that could lead to Foreign Object Damage (FOD).
The high contact surface area which is away from fastener
points enables turning of highly rounded fasteners.
Weight (lbs): 17.10
13 PieCe metriC reversible Combination
>
>
>
>
>
>
>
>
>
>
>
Size (mm)
7
8
9
10
11
12
13
14
15
16
17
18
19
Tool Roll
Point Count
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Overall Length (in)
5-1/2
5-1/2
5-15/16
6-1/4
6-9/16
6-3/4
7
7-1/2
7-7/8
8-3/16
8-7/8
9-5/16
9-3/4
Ratcheting
Contents
JSCVM07
JSCVM08
JSCVM09
JSCVM10
JSCVM11
JSCVM12
JSCVM13
JSCVM14
JSCVM15
JSCVM16
JSCVM17
JSCVM18
JSCVM19
JSCVM13SP
Metric Spline wrenches can be used on metric 4, 6, 12 point, spline and Torx® fasteners.
The chrome-vanadium switch lever allows for easy changes in turning direction which helps improve speed.
Chrome-vanadium box ends and switch levers provide high strength and durability.
Spline design was created for use with speciality spline bolts which are used
when weight and size of bolt heads must be minimized.
Spline design enables the wrench to contact conventional fasteners away from the corners, which
applies force over a larger area, reducing risk of fastener scoring and helps prevent rounding of the
corners and other fasteners damage that could lead to Foreign Object Damage (FOD).
The high contact surface area which is away from fastener points enables turning of highly rounded fasteners.
Weight (lbs): 3.02
Wrenches
Product #: JSCVM-13S
9 PieCe reversible Combination
Product #: JSCV-9S
>
>
>
>
>
>
Contents
JSCV09
JSCV10
JSCV12
JSCV14
JSCV16
JSCV18
JSCV20
JSCV22
JSCV24
JSCV9SP
Fractional spline wrenches can be used on fractional 4, 6, 12 point, spline fasteners and Torx® fasteners.
Weight (lbs): 1.90
Size (in)
9/32
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Tool Roll
Point Size
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Overall
Length (in)
5-1/2
5-1/2
6-1/4
6-1/2
7
7-1/2
8-3/16
8-7/8
9-3/4
Made in USA
561
Wrenches
blaCk Chrome Combination reversible
>
>
>
>
>
>
>
>
Ratcheting
>
>
562
The chrome-vanadium switch lever allows for easy
changes in turning direction which helps improve speed.
15° angled offset box end helps keep
shank clear of obstructions.
Spline design was created for use with specialty
spline bolts which are used when weight and
size of bolt heads must be minimized.
Black chrome finish is corrosion resistant
and visually distinctive.
Product #
JSCV07
JSCV08
JSCV09
JSCV10
JSCV11
JSCV12
JSCV14
JSCV16
JSCV18
JSCV20
JSCV22
JSCV24
JSCV26
JSCV28
JSCV30
JSCV32
JSCV34
JSCV36
JSCV40
JSCV48
Size (in)
7/32
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-1/2
Outside Head Width
(in) (C)
9/16
9/16
11/16
11/16
3/4
13/16
15/16
1-1/16
1-1/8
1-5/16
1-3/8
1-9/16
1-13/16
1-13/16
2-1/16
2-1/16
2-1/4
2-5/16
2-1/2
2-13/16
Head Thickness
(in) (D)
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
Head Thickness
(in) (D1)
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
Overall Length
(in)
5
5
5-1/2
5-1/2
5-15/16
6-1/4
6-1/2
7
7-1/2
8-3/16
8-7/8
9-3/4
1-17/16
1-17/16
12-3/4
12-3/4
14-1/8
15-7/8
16-3/4
19-5/16
Weight |
(lbs)
0.06
0.06
0.07
0.07
0.09
0.11
0.14
0.20
0.22
0.33
0.37
0.48
0.77
0.73
1.02
1.00
1.45
1.96
2.30
3.09
blaCk Chrome metriC Combination reversible
>
>
>
>
>
>
>
>
>
Metric Spline wrenches can be used on metric
Size (mm)
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
24
27
30
32
34
36
Outside Head Width
(in) (C)
9/16
11/16
11/16
3/4
13/16
15/16
1
1-11/16
1-1/8
1-1/4
1-5/16
1-3/8
1-1/2
1-9/16
1-13/16
1-13/16
2-1/16
2-1/4
2-5/16
2-1/2
2-1/2
2-13/16
Head
Thickness (in) (D)
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
Head
Thickness (in) (D1)
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
Overall Length (in) Weight (lbs)
5
0.06
5-1/2
0.07
5-1/2
0.07
5-15/16
0.09
6-1/4
0.11
6-9/16
0.14
6-3/4
0.17
7
0.20
7-1/2
0.24
7-7/8
0.28
8-3/16
0.33
8-7/8
0.39
9-5/16
0.43
9-3/4
0.50
11-7/16
0.76
11-7/16
0.76
12-3/4
1.06
14-1/8
1.42
15-7/8
1.89
16-3/4
2.32
18-1/8
2.65
19-5/16
3.09
Ratcheting
Product #
JSCVM06
JSCVM07
JSCVM08
JSCVM09
JSCVM10
JSCVM11
JSCVM12
JSCVM13
JSCVM14
JSCVM15
JSCVM16
JSCVM17
JSCVM18
JSCVM19
JSCVM21
JSCVM22
JSCVM24
JSCVM27
JSCVM30
JSCVM32
JSCVM34
JSCVM36
Wrenches
>
Made in USA
563
9 PieCe non-reversible Combination WrenCh set - sPline
Wrenches
Product #: JSCR-9S
>
>
>
>
>
>
>
>
>
>
Non-reversing ratcheting wrenches can be flipped over to turn the fastener in the opposite direction.
Ratcheting spline box end is countersunk for easy application to the fastener.
Spline design was created for use with specialty spline bolts which are used
help apply force over a large area helping to reduce risk of fastener rounding.
Spline design also helps prevent rounding of corners and other fastener damage that could lead to Foreign Object Damage (FOD).
Fractional spline wrenches can be used on fractional 4, 6, 12 point, spline and Torx® fasteners.
Weight (lbs): 2.71
Ratcheting
Contents
JSCR08
JSCR10
JSCR12
JSCR14
JSCR16
JSCR18
JSCR20
JSCR22
JSCR24
JSCR9SP
Size (in)
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Tool Roll
Overall Length (in)
5
5-1/2
6-1/4
6-1/2
7
7-1/2
8-3/16
8-7/8
9-3/4
10 PieCe metriC non-reversible Combination
WrenCh set - sPline
Product #: JSCRM-10S
>
>
>
>
>
>
>
>
>
>
>
Metric Spline wrenches can be used on metric 4, 6, 12 point, spline and Torx® fasteners.
Chrome-vanadium box ends and switch levers provide high strength and durability.
Spline design was created for use with speciality spline bolts which are used
applies force over a larger area, reducing risk of fastener scoring and helps prevent rounding of the
corners and other fasteners damage that could lead to Foreign Object Damage (FOD).
Weight (lbs): 2.71
Contents
JSCRM10
JSCRM11
JSCRM12
JSCRM13
JSCRM14
JSCRM15
JSCRM16
JSCRM17
JSCRM18
JSCRM19
JSCRM10SP
564
Point Count
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Size (mm)
10
11
12
13
14
15
16
17
18
19
Tool Roll
Point Count
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Spline
Overall Length (in)
6-1/4
6-1/2
6-3/4
7
7-1/2
7-7/8
8-3/16
8-7/8
9-5/16
9-3/4
blaCk Chrome Combination non-reversible
>
>
>
>
>
>
>
>
>
Spline design was created for use with speciality
Size (in)
1/4
5/16
11/32
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
Outside Head Width
(in) (C)
9/16
11/16
3/4
13/16
15/16
1-1/16
1-1/8
1-5/16
1-3/8
1-9/16
1-13/16
1-13/16
2-1/16
2-1/16
Head
Thickness (in) (D)
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
Head
Thickness (in) (D1)
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
Overall Length
(in)
5
5-1/2
5-15/16
6-1/4
6-1/2
7
7-1/2
8-3/16
8-7/8
9-3/4
11-7/16
11-7/16
12-3/4
12-3/4
Weight (lbs)
0.05
0.06
0.08
0.10
0.13
0.18
0.22
0.32
0.38
0.47
0.70
0.70
1.02
1.02
Ratcheting
Product #
JSCR08
JSCR10
JSCR11
JSCR12
JSCR14
JSCR16
JSCR18
JSCR20
JSCR22
JSCR24
JSCR26
JSCR28
JSCR30
JSCR32
Wrenches
>
Made in USA
565
Wrenches
blaCk Chrome metriC Combination non-reversible
>
>
>
>
>
>
>
>
>
>
Metric Spline wrenches can be used on metric
Spline design was created for use with speciality
Ratcheting
Product #
JSCRM08
JSCRM09
JSCRM10
JSCRM11
JSCRM12
JSCRM13
JSCRM14
JSCRM15
JSCRM16
JSCRM17
JSCRM18
JSCRM19
Size (mm)
8
9
10
11
12
13
14
15
16
17
18
19
Outside Head Width
(in) (C)
11/16
3/4
13/16
15/16
1
1-1/16
1-1/8
1-1/4
1-5/16
1-7/16
1-1/2
1-9/16
Head
Thickness (in) (D)
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
1/4
Head
Thickness (in) (D1)
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
1/4
Overall Length
(in)
5-1/2
5-15/16
6-1/4
6-1/2
6-3/4
7
7-1/2
7-7/8
8-3/16
8-7/8
9-5/16
9-3/4
Weight (lbs)
0.06
0.08
0.10
0.13
0.16
0.18
0.22
0.25
0.32
0.38
0.46
0.47
8 PieCe Double box reversible ratCheting
WrenCh set - sPline
Product #: JSBV-8S
>
>
>
>
>
>
>
>
>
Contents
JSBV0709
JSBV0810
JSBV1214
JSBV1618
JSBV2022
JSBV2428
JSBV2630
JSBV3236
JSBV8SP
566
Non-reversing ratcheting wrenches can be flipped over to turn the fastener in the opposite direction.
Ratcheting spline box end is countersunk for easy application to the fastener.
Spline design was created for use with specialty spline bolts which are used
help apply force over a large area helping to reduce risk of fastener rounding.
Spline design also helps prevent rounding of corners and other fastener damage that could lead to Foreign Object Damage (FOD).
The fractional spline wrenches can be used on fractional 4, 6, 12 point and spline fasteners.
Weight (lbs): 4.12
Size (in)
Point Count
7/32 x 9/32
Spline
1/4 x 5/16
Spline
3/8 x 7/16
Spline
1/2 x 9/16
Spline
5/8 x 11/16
Spline
3/4 x 7/8
Spline
13/16 x 15/16
Spline
1 x 1-1/8
Spline
Tool Roll
Overall Length (in)
4-1/2
4-1/2
5-15/16
7-1/16
7-7/8
9-5/8
10-1/4
11-5/8
blaCk Chrome Double box reversible
>
>
>
>
>
>
Ratcheting spline box end is countersunk
for easy application to the fastener.
fasteners away from the corners, which help apply force
over a large area helping to reduce risk of fastener rounding.
Spline design also helps prevent rounding of
corners and other fastener damage that could
lead to Foreign Object Damage (FOD).
The fractional spline wrenches can be used on
fractional 4, 6, 12 point and spline fasteners.
Product #
JSBV0709
JSBV0810
JSBV1214
JSBV1618
JSBV2022
JSBV2428
JSBV2630
JSBV3236
Size (in)
7/32 x 9/32
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
3/4 x 7/8
13/16 x 15/16
1 x 1-1/8
Outside Head Width
(in) (C)
11/16
11/16
7/8
1
1-3/16
1-5/8
1-13/16
2-5/16
Wrenches
>
C1
C
Head
Thickness (in) (D)
1/8
1/8
1/8
3/16
3/16
1/4
1/4
5/16
Head
Overall Length
Thickness (in) (D1)
(in)
1/8
4-1/2
1/8
4-1/2
1/8
5-15/16
3/16
7-1/16
3/16
7-7/8
1/4
9-5/8
1/4
10-1/4
5/16
11-5/8
Product #: JHA4S
>
>
>
>
>
Full polish finish provides corrosion
resistance and easy clean surfaces.
Converts ratcheting wrench into superthin ratchets or ratcheting bit drivers.
Inserts into box end with a stable
locking and release mechanism.
Converts:
> 3/8" Ratcheting Wrench to 1/4" Drive Bit Adapter
> 3/8" Ratcheting Wrench to 1/4" Drive Adapter
Weight (lbs): 0.21
Ratcheting
4 PieCe ratCheting WrenCh aDaPter set
Weight (lbs)
0.08
0.08
0.12
0.23
0.35
0.63
0.84
0.95
4 PieCe metriC ratCheting WrenCh aDaPter set
Product #: JHAM4S
>
>
>
>
>
>
resistance and easy clean surfaces.
Converts ratcheting wrench into superthin ratchets or ratcheting bit drivers.
Inserts into box end with a stable
locking and release mechanism.
Easy to read markings.
Converts:
> 10 mm Ratcheting Wrench to 1/4" Drive Bit Adapter
> 10 mm Ratcheting Wrench to 1/4" Drive Adapter
Weight (lbs): 0.22
Made in USA
567
Wrenches
5 PieCe oFFset reversible ratCheting
box WrenCh set - 6 anD 12 Point
Product #: J1180A
>
>
>
>
>
>
>
25° offset box end helps keep shank
clear of obstructions.
Shorter length for access to confined workspaces.
Reversing switch lever allows for easy changes in
turning direction which helps improve speed.
Full polish finish on handle provides corrosion
resistance and easy to clean surfaces.
6 point box end allows for large wrench
to fastener contact area which helps
prevent rounding of the fastener.
12 point box end allows for fine indexing,
helping to improve speed and access.
Weight (lbs): 2.24
Size (in)
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
3/4 x 7/8
Tool Roll
Point Count
6
6
6
12
12
Overall Length (in)
4-1/4
5-7/16
6-3/4
8
9-1/8
Ratcheting
Contents
J1181-A
J1182-A
J1183-A
J1184-A
J1185-A
J25TR06C
7 PieCe metriC oFFset ratCheting
box WrenCh set - 6 anD 12 Point
Product #: J1180MA
>
>
>
>
>
>
Fits 4, 6 and 12 point fasteners.
6 point box end allows larger wrench
Weight (lbs): 3.60
Contents
J1181M-A
J1182M-A
J1183MA-A
J1184MA-A
J1185M-A
J1186M-A
J1187M-A
J25TR01C
568
Size (mm)
7 x 8
9 x 10
11 x 13
12 x 14
15 x 17
16 x 18
19 x 21
Tool Roll
Point Count
6
6
6
6
12
12
12
Overall Length (in)
4-1/4
5-7/16
6-3/4
6-3/4
8
8
9-1/8
oFFset reversible ratCheting Double
box WrenChes - 6 Point
>
>
>
>
Product #
J1181-A
J1182-A
J1183-A
Size (in)
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
Outside Head
Width (in) (C)
19/32
25/32
1
Wrenches
>
Head
Outside Head
Head
Overall
Thickness (in) (D) Width (in) (C1) Thickness (in) (D1) Length (in) Weight (lbs)
3/8
43/64
3/8
4-1/4
0.15
3/8
7/8
3/8
5-7/16
0.21
1/2
1-9/64
1/2
6-3/4
0.43
Ratcheting
metriC oFFset reversible ratCheting
Double box WrenChes - 6 Point
>
>
>
>
>
>
6 point box end allows larger wrench
The wrench self-aligns with the fastener.
Product #
J1181M-A
J1182M-A
J1183MA-A
J1184MA-A
Size (mm)
7 x 8
9 x 10
11 x 13
12 x 14
Outside Head Width
Head
(in) (C)
Thickness (in) (D)
19/32
3/8
25/32
3/8
1-1/64
1/2
1-1/64
1/2
Made in USA
Outside Head
Head
Overall
Width (in) (C1) Thickness (in) (D1) Length (in) Weight (lbs)
43/64
3/8
4-1/4
0.13
7/8
3/8
5-7/16
0.22
1-5/32
1/2
6-3/4
0.32
1-5/32
1/2
6-3/4
0.32
569
Wrenches
oFFset reversible ratCheting Double
>
>
>
>
>
>
25° offset box end helps keep shank clear of
obstructions for greater accessibility.
12 point box end allows for fine indexing.
Ratcheting
Product #
J1179T
J1181T
J1182T
J1183T
J1184-A
J1185-A
J1186
Outside Head
Width (in) (C)
19/32
19/32
25/32
1
1-19/64
1-13/32
1-19/64
Head
Thickness (in) (D)
3/8
3/8
3/8
1/2
1/2
1/2
1/2
Outside Head
Head
Overall
43/64
3/8
4-1/4
0.15
41/64
3/8
4-1/4
0.15
7/8
3/8
5-7/16
0.21
1-9/64
1/2
6-3/4
0.43
1-7/16
1/2
8
0.58
1-9/16
1/2
9-1/8
0.77
1-7/16
1/2
8
0.58
metriC oFFset reversible ratCheting
Double box WrenChes - 12 Point
>
>
>
>
>
>
>
Built in retaining ring in each ratchet
wheel adds speed and convenience.
Product #
J1185M-A
J1186M-A
J1187M-A
570
Size (in)
7/32 x 9/32
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
3/4 x 7/8
5/8 x 3/4
Size (mm)
15 x 17
16 x 18
19 x 21
Outside Head
Width (in) (C)
1-19/64
1-19/64
1-13/32
Head
Thickness (in) (D)
1/2
1/2
1/2
Outside Head
Head
Overall
1-7/16
1/2
8
0.46
1-7/16
1/2
8
0.46
1-37/64
1/2
9-1/8
0.52
5 PieCe reversible ratCheting box WrenCh set - 12 Point
Product #: J1190LO
>
>
>
>
>
Built-in retaining ring in each ratchet wheel adds
speed and convenience for greater accessibility.
Wrench self-aligns on the fastener
which helps save time.
helping improve speed and access.
Weight (lbs): 2.18
Contents
J1191LO
J1192LO
J1193LO
J1194LO
J1195LO
J25TR06C
Size (in)
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
3/4 x 7/8
Tool Roll
Point Count
12
12
12
12
12
Overall Length (in)
4-1/2
5-1/2
6-7/8
8-1/8
9-1/4
Product #: J1190MLO
>
>
>
>
>
>
>
Ratcheting
5 PieCe metriC reversible ratCheting
box WrenCh set - 12 Point
>
Wrenches
>
Built in retaining ring in each ratchet wheel adds
Weight (lbs): 2.03
Contents
J1191MLO
J1192MLO
J1193MLO
J1194MLO
J1195MLO
Size (mm)
7 x 8
9 x 10
11 x 12
13 x 14
15 x 17
J25TR06C
Tool Roll
Overall Length (in)
4-1/2
5-1/2
6-7/8
6-7/8
8-1/8
Made in USA
571
Wrenches
reversible ratCheting Double box WrenChes - 12 Point
>
>
>
>
>
>
>
Full polish finish provides corrosion resistance and easy to clean surfaces.
Built in retaining ring in each ratchet wheel adds speed and convenience.
Reversing switch lever allows for easy changes in turning direction which helps improve speed.
Size (in)
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
3/4 x 7/8
Overall Length
(in)
Weight (lbs)
4-1/2
0.15
5-1/2
0.21
6-7/8
0.31
8-1/8
0.58
9-1/4
0.67
Ratcheting
Product #
J1191LO
J1192LO
J1193LO
J1194LO
J1195LO
metriC reversible ratCheting Double
>
>
>
>
>
>
>
Built in retaining ring in each ratchet wheel adds speed and convenience for greater accessibility.
Reversing switch lever allows for easy changes in turning direction which helps improve speed.
Product #
J1191MLO
J1192MLO
J1193MLO
J1194MLO
J1195MLO
572
Size (mm)
7 x 8
9 x 10
11 x 12
13 x 14
15 x 17
Overall Length
(in)
Weight (lbs)
4-1/2
0.16
5-1/2
0.23
6-7/8
0.33
6-7/8
0.61
8-1/8
0.7
5 PieCe metriC ratCheting box WrenCh set - 6 anD 12 Point
Product #: J1190MA
>
>
>
>
>
>
6 point box end allows for a large wrench to fastener
contact area which helps prevent fastener rounding.
Weight (lbs): 2.12
Contents
J1191M-A
J1192M-A
J1193MA-A
J1194MA-A
J1195M-A
J25TR06C
Size (mm)
7 x 8
9 x 10
11 x 13
12 x 14
15 x 17
Tool Roll
Point Count
6
6
6
6
12
Overall Length (in)
4-1/2
5-1/2
6-7/8
6-7/8
8-1/8
Product #: J1190A
>
>
>
>
>
Ratcheting
5 PieCe ratCheting box WrenCh set - 12 Point
>
Wrenches
>
Weight (lbs): 1.72
Contents
J1191T-A
J1192T-A
J1193T-A
J1194-A
J1195-A
J25TR06C
Size (in)
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
3/4 x 7/8
Tool Roll
Point Count
12
12
12
12
12
Overall Length (in)
4-1/2
5-1/2
6-7/8
8-1/8
9-1/4
Made in USA
573
3 PieCe ratCheting box WrenCh set - 12 Point
Wrenches
Product #: J1190B
>
>
>
>
>
>
>
Full polish finish provides corrosion resistance
and easy to clean surfaces.
Built in retaining ring in each ratchet wheel adds
Weight (lbs): 1.10
Size (in)
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
Tool Roll
Point Count
12
12
12
Overall Length (in)
5-1/2
6-7/8
8-1/8
Ratcheting
Contents
J1192T-A
J1193T-A
J1194-A
J25TR17C
ratCheting Double box WrenChes - 6 Point
>
>
>
>
6 point box end allows for large wrench to fastener
Product #
J1191-A
J1192-A
J1193-A
574
Size (in)
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
Outside Head
Width (in) (C)
19/32
3/4
1
Head
Outside Head
Head
Overall
Thickness (in) (D) Width (in) (C1) Thickness (in) (D1) Length (in)
3/8
43/64
3/8
4-1/2
1/2
7/8
1/2
5-1/2
1/2
1-1/8
1/2
6-7/8
Weight (lbs)
0.12
0.18
0.29
metriC ratCheting Double box WrenChes - 6 Point
>
Product #
J1191M-A
J1192M-A
J1193MA-A
J1194MA-A
Size (mm)
7 x 8
9 x 10
11 x 13
12 x 14
Outside Head
Width (in) (C)
19/32
25/32
1-1/64
1-1/64
Head
Thickness (in) (D)
3/8
3/8
1/2
1/2
Wrenches
>
>
>
6 point box end allows for large wrench to fastener
Outside Head
Width (in) (C1)
43/64
7/8
1-5/32
1-5/32
Head
Overall Length
Thickness (in) (D1)
(in)
Weight (lbs)
3/8
4-1/2
0.12
3/8
5-1/2
0.17
1/2
6-7/8
0.31
1/2
6-7/8
0.39
>
>
>
>
>
Product #
J1191T-A
J1192T-A
J1193T-A
J1194-A
J1195-A
J1196-A
J1197-A
J1198*
J1199*
Ratcheting
ratCheting Double box WrenChes - 12 Point
Outside Head
Head
Outside Head
Head
Overall
Size (in)
Width (in) (C) Thickness (in) (D) Width (in) (C1) Thickness (in) (D1) Length (in) Weight (lbs)
1/4 x 5/16
9/32
3/8
43/64
3/8
4-1/2
0.12
3/8 x 7/16
3/4
3/8
7/8
3/8
5-1/2
0.17
1/2 x 9/16
1
1/2
1-1/8
1/2
6-7/8
0.29
5/8 x 11/16
1-19/64
1/2
1-7/16
1/2
8-1/8
0.44
3/4 x 7/8
1-13/32
1/2
1-37/64
1/2
9-1/4
0.52
5/8 x 3/4
1-19/64
1/2
1-7/16
1/2
8-1/8
0.47
13/16 x 15/16
1-13/32
1/2
1-37/64
1/2
9-1/4
0.52
1-1/4 x 1-1/16
1-29/32
9/16
2-1/4
9/16
15
1.38
1-1/16 x 1-1/4
1-29/32
9/16
2-1/4
9/16
15
1.38
* Reversible
Made in USA
575
metriC ratCheting Double box WrenChes - 12 Point
Wrenches
>
>
>
>
>
12 point box end allows for fine indexing
and fits 4, 6 and 12 point fasteners.
Ratcheting
Product #
J1195M-A
J1196M
J1197M
Outside Head
Width (in) (C)
1-19/64
1-19/64
1-13/32
Head
Outside Head
Head
Overall
Thickness (in) (D) Width (in) (C1) Thickness (in) (D1) Length (in) Weight (lbs)
1/2
1-7/16
1/2
8-7/64
0.48
1/2
1-7/16
1/2
8-7/64
0.48
1/2
1-37/64
1/2
9-15/64
0.55
reFrigeration WrenChes
>
>
>
>
>
Designed for servicing automotive,
commercial, and residential air conditioners,
refrigeration units and freezers.
Hex openings are used for packing gland
fittings, mounting bolts, clutch bolts, tubing
fittings, dust cap nuts and oil check plugs.
Square openings are used on male service
valves, plug fittings, compressor valves
and refrigerant charging tanks.
Product #
J1111
J1112
576
Size (mm)
15 x 17
16 x 18
19 x 21
Size
1/4 x 3/16 Square
1/4 x 3/16 Square
Size
9/16 x 1/2 Hex
1/4 x 3/16 Hex
Overall Length (in)
7
5-1/2
Weight (lbs)
0.35
0.25
7 PieCe ratCheting Flare nut WrenCh set - 12 Point
Product #: J3800A
>
>
>
Contents
J3812
J3814
J3816
J3818
J3820
J3822
J3824
J25TR03C
Wrenches
>
>
Black oxide finish.
Non-reflective black oxide finish for use
where non-plated products are required.
12 Point flare nut box end allows for fine indexing,
Pivoting head allows user to place the wrench
over the connected pipes to reach the fastener.
Weight (lbs): 1.93
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Tool Roll
Point Count
12
12
12
12
12
12
12
Overall Length (in)
5-7/16
5-7/16
5-7/16
7-1/4
7-1/4
7-1/4
7-1/4
ratCheting Flare nut WrenChes - 12 Point
>
>
Ratcheting
>
>
Black oxide finish.
Product #
J3812
J3814
J3816
J3818
J3820
J3822
J3824
J3826
J3828
J3830
J3832
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
Outside Head Width (in) (C)
1
1
1
1-5/16
1-5/16
1-5/16
1-5/16
1-11/16
1-11/16
1-11/16
1-11/16
Made in USA
Head Thickness (in) (D)
9/32
9/32
9/32
3/8
3/8
3/8
3/8
7/16
7/16
1/2
1/2
Overall Length (in)
5-7/16
5-7/16
5-7/16
7-1/4
7-1/4
7-1/4
7-1/4
9-3/8
9-3/8
9-3/8
9-3/8
Weight (lbs)
0.17
0.17
0.17
0.31
0.31
0.31
0.31
0.58
0.58
0.58
0.58
577
17 PieCe metriC Combination WrenCh set - 12 Point
Full Polish combination
Wrenches
Product #: J1200RM-T500
>
>
>
>
>
12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners.
Anti-Slip Design (ASD) open end. Metric sizes 9 mm and smaller do not have ASD feature.
Box ends incorporate the TorquePlus™ system.
Weight (lbs): 6.92
Contents
J1207M-T500
J1208M-T500
J1209M-T500
J1210M-T500
J1211M-T500
J1212M-T500
J1213M-T500
J1214M-T500
J1215M-T500
J1216M-T500
J1217M-T500
J1218M-T500
J1219M-T500
J1220M-T500
J1221M-T500
J1222M-T500
J1224M-T500
J25TR36C
Size (mm)
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
24
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-5/32
5-13/32
5-21/32
5-29/32
6-29/32
7-45/64
7-29/32
8-13/16
9-5/32
9-35/64
10-9/32
10-11/16
11-1/32
11-27/64
11-13/16
12-17/32
13-5/16
ASME B107.100
15 PieCe Combination asD WrenCh set - 12 Point
Product #: J1200F-T500
>
>
>
>
>
12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6, and 12 point fasteners.
Anti-Slip Design (ASD) open end. Fractional sizes 11/32" and smaller do not have the ASD feature.
Weight (lbs): 9.76
Contents
J1210-T500
J1212-T500
J1214-T500
J1216-T500
J1218-T500
J1220-T500
J1222-T500
J1224-T500
J1226-T500
J1228-T500
J1230-T500
J1232-T500
J1234-T500
J1236-T500
J1240-T500
J25TR34C
Size (in)
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-3/8
6
7
8
8-7/8
9-1/2
10-1/4
11
11-7/8
12-1/2
13-1/4
14
15-1/4
15-7/8
16-7/8
ASME B107.100
578
Product #: J1200H-T500
12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6, and 12 point fasteners.
Weight (lbs): 2.02
Contents
J1212-T500
J1214-T500
J1216-T500
J1218-T500
J1220-T500
J1222-T500
J1224-T500
J25TR33C
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Tool Roll
Point Count
12
12
12
12
12
12
12
Wrenches
>
>
>
>
>
Overall Length (in)
6
7
8
8-7/8
9-1/2
10-1/4
11
ASME B107.100
The groove locks the
fastener in place.
The Anti-Slip Design consists of two features:
>
>
A notch to lock the fastener in place.
A curve for greater contact area against the fastener.
An ASD Wrench does not apply load to the corners of the
fastener, so it helps to prevent rounding. Because of the
greater surface contact, the wrench can also successfully
apply greater torque without slipping.
The curved edge grips
the flat of the bolt for
a better grip and less
rounding.
full polish combination
Features anD beneFits –
anti-sliP Design (asD)
9 PieCe metriC Combination WrenCh set - 12 Point
Product #: J1200HM-T500
>
>
>
>
>
Anti-Slip Design (ASD) open end. Metric sizes 9 mm and smaller do not have ASD feature.
Weight (lbs): 1.62
Contents
J1207M-T500
J1208M-T500
J1209M-T500
J1210M-T500
J1211M-T500
J1212M-T500
J1213M-T500
J1214M-T500
J1215M-T500
J25TR35C
Size (mm)
7
8
9
10
11
12
13
14
15
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-5/32
5-13/32
5-21/32
5-29/32
6-29/32
7-45/64
7-29/32
8-13/16
9-5/32
ASME B107.100
Made in USA
579
Full Polish Combination WrenChes - 6 Point
Wrenches
>
>
>
>
Anti-Slip Design (ASD) open end. Fractional sizes
11/32" and smaller do not have the ASD feature.
Product #
J1208H-T500
J1210H-T500
J1211H-T500
J1212H-T500
J1214H-T500
J1216H-T500
J1218H-T500
J1220H-T500
J1222H-T500
J1224H-T500
J1226H-T500
J1228H-T500
J1230H-T500
J1232H-T500
J1234H-T500
J1236H-T500
J1238H-T500
J1240H-T500
Throat
Size (in) Depth (in) (B)
1/4
19/64
5/16
3/8
11/32
13/32
3/8
13/32
7/16
17/32
1/2
39/64
9/16
11/16
5/8
3/4
11/16
13/16
3/4
57/64
13/16
31/32
7/8
1-1/16
15/16
1-1/8
1
1-13/64
1-1/16
1-9/32
1-1/8
1-23/64
1-3/16
1-23/64
1-1/4
1-1/2
Outside Head
Head
Outside Head
Head
Width (in) (C) Thickness (in) (D) Width (in) (C1) Thickness (in) (D1)
39/64
5/32
27/64
15/64
45/64
13/64
33/64
17/64
25/32
21/32
17/32
7/32
13/16
1/4
39/64
5/16
15/16
17/64
43/64
21/64
1-5/64
21/64
49/64
11/32
1-3/16
11/32
27/32
23/64
1-21/64
25/64
15/16
13/32
1-29/64
27/64
1-1/64
7/16
1-37/64
31/64
1-3/32
15/32
1-11/16
33/64
1-11/64
1/2
1-13/16
35/64
1-1/4
33/64
1-29/32
39/64
1-27/64
37/64
2-1/64
21/32
1-13/32
37/64
2-9/64
45/64
1-31/64
39/64
2-17/64
3/4
1-21/32
41/64
2-25/64
3/4
1-21/32
21/32
2-33/64
53/64
1-3/4
45/64
Overall
Weight
Length (in) (lbs)
4-59/64
0.04
5-7/16
0.08
5-43/64
0.08
5-29/32
0.10
6-29/32
0.14
7-29/32
0.20
8-13/16
0.27
9-35/64
0.35
10-19/64 0.38
11-3/64
0.52
11-13/16 0.54
12-35/64 0.65
13-5/16
0.74
14-1/16
0.95
15-1/4
1.13
15-7/8
1.38
15-7/8
1.54
16-59/64 1.89
ASME B107.100
Full Polish metriC Combination WrenChes - 6 Point
>
>
>
>
Anti-Slip Design (ASD) open end. Metric sizes
9 mm and smaller do not have ASD feature.
Size
Product #
(mm)
J1206MH-T500
6
J1207MH-T500
7
J1208MH-T500
8
J1209MH-T500
9
J1210MH-T500 10
J1211MH-T500 11
J1212MH-T500 12
J1213MH-T500 13
J1214MH-T500 14
J1215MH-T500 15
J1216MH-T500 16
J1217MH-T500 17
J1218MH-T500 18
J1219MH-T500 19
Throat
Depth (in) (B)
19/64
5/16
25/64
13/32
31/64
33/64
9/16
39/64
11/16
3/4
3/4
53/64
55/64
29/32
Outside Head
Head
Outside Head
Head
Width (in) (C) Thickness (in) (D) Width (in) (C1) Thickness (in (D1)
35/64
5/32
25/64
5/32
19/32
3/16
13/32
15/64
11/16
13/64
1/2
17/64
3/4
7/32
35/64
17/64
7/8
1/4
21/32
5/16
59/64
17/64
11/16
21/64
1
19/64
47/64
11/32
1-1/32
21/64
25/32
11/32
1-3/16
11/32
55/64
23/64
1-1/4
3/8
7/8
23/64
1-21/64
25/64
15/16
13/32
1-25/64
27/64
1-1/32
7/16
1-33/64
29/64
1-1/16
29/64
1-37/64
31/64
1-7/64
15/32
Overall
Weight
Length (in) (lbs)
4-59/64
0.04
5-11/64
0.04
5-7/16
0.07
5-43/64
0.08
5-29/32
0.13
6-29/32
0.14
7-23/32
0.17
7-29/32
0.18
8-13/16
0.22
9-9/64
0.25
9-35/64
0.26
10-19/64 0.38
10-11/16 0.41
11-3/64
0.46
ASME B107.100
580
Full Polish Combination WrenChes - 12 Point
>
>
>
>
Throat
Outside Head
Head
Outside Head
Head
Overall
Size (in) Depth (in) (B) Width (in) (C) Thickness (in) (D) Width (in) (C1) Thickness (in) (D1) Length (in)
1/4
19/64
39/64
3/16
27/64
15/64
4-7/8
9/32
23/64
41/64
3/16
29/64
7/32
5-5/32
5/16
3/8
45/64
3/16
33/64
17/64
5-3/8
11/32
13/32
25/32
3/16
17/32
7/32
5-5/8
3/8
13/32
13/16
3/16
39/64
5/16
6
7/16
17/32
15/16
15/64
43/64
21/64
7
1/2
39/64
1-5/64
1/4
49/64
11/32
8
9/16
11/16
1-3/16
9/32
27/32
23/64
8-7/8
5/8
3/4
1-21/64
19/64
15/16
13/32
9-1/2
11/16
13/16
1-29/64
5/16
1-1/64
7/16
10-1/4
3/4
57/64
1-37/64
11/32
1-3/32
15/32
11
13/16
31/32
1-11/16
23/64
1-11/64
1/2
11-7/8
7/8
1-1/16
1-13/16
3/8
1-1/4
33/64
12-1/2
15/16
1-1/8
1-29/32
13/32
1-27/64
37/64
13-1/4
1
1-13/64
2-1/64
13/32
1-13/32
37/64
14
1-1/16
1-9/32
2-9/64
29/64
1-31/64
39/64
15-1/4
1-1/8
1-23/64
2-17/64
15/32
1-21/32
41/64
15-7/8
1-1/4
1-1/2
2-33/64
33/64
1-3/4
45/64
16-7/8
Weight
(lbs)
0.04
0.06
0.08
0.08
0.10
0.14
0.20
0.27
0.35
0.38
0.52
0.54
0.65
0.74
0.95
1.13
1.38
1.89
ASME B107.100
Full Polish metriC Combination WrenChes - 12 Point
>
>
>
>
>
12 point box end allows for fine indexing, helping to improve
speed and access. Fits 4, 6 and 12 point fasteners.
Metric sizes 9 mm and smaller do not have ASD feature.
Product #
J1207M-T500
J1208M-T500
J1209M-T500
J1210M-T500
J1211M-T500
J1212M-T500
J1213M-T500
J1214M-T500
J1215M-T500
J1216M-T500
J1217M-T500
J1218M-T500
J1219M-T500
J1220M-T500
J1221M-T500
J1222M-T500
J1224M-T500
Size
Throat
(mm) Depth (in) (B)
7
5/16
8
25/64
9
13/32
10
31/64
11
33/64
12
9/16
13
39/64
14
11/16
15
3/4
16
3/4
17
53/64
18
55/64
19
29/32
20
63/64
21
63/64
22
1-3/64
24
1-1/8
Outside Head
Width (in) (C)
19/32
11/16
3/4
7/8
59/64
1
1-1/32
1-3/16
1-1/4
1-21/64
1-25/64
1-33/64
1-37/64
1-11/16
1-11/16
1-25/32
1-57/64
Head
Outside Head
Head
Thickness (in) (D) Width (in) (C1) Thickness (in) (D1)
11/64
13/32
15/64
3/16
1/2
17/64
3/16
35/64
17/64
7/32
21/32
5/16
15/64
11/16
21/64
1/4
47/64
11/32
1/4
25/32
11/32
9/32
55/64
23/64
19/64
7/8
23/64
5/16
15/16
13/32
21/64
1-1/32
7/16
11/32
1-1/16
29/64
11/32
1-7/64
15/32
23/64
1-3/16
31/64
23/64
1-3/16
31/64
3/8
1-17/64
1/2
13/32
1-11/32
35/64
full polish combination
Product #
J1208-T500
J1209-T500
J1210-T500
J1211-T500
J1212-T500
J1214-T500
J1216-T500
J1218-T500
J1220-T500
J1222-T500
J1224-T500
J1226-T500
J1228-T500
J1230-T500
J1232-T500
J1234-T500
J1236-T500
J1240-T500
Wrenches
>
speed and access. Fits 4, 6, and 12 point fasteners.
Fractional sizes 11/32" and smaller
do not have the ASD feature.
Overall
Weight
Length (in) (lbs)
5-5/32
0.04
5-13/32
0.07
5-21/32
0.08
5-29/32
0.13
6-29/32
0.14
7-45/64
0.17
7-29/32
0.18
8-13/16
0.22
9-5/32
0.25
9-35/64
0.26
10-9/32
0.38
10-11/16 0.41
11-1/32
0.46
11-27/64 0.55
11-13/16 0.54
12-17/32 0.62
13-5/16
0.77
ASME B107.100
Made in USA
581
Full Polish Combination WrenChes - sPline
Wrenches
>
>
>
>
>
>
>
Proto® Spline Tools are designed to service high tensile
strength fasteners used widely on military and commercial
aircraft and in heavy machinery applications where vibration
is prevalent. They are also used in automotive and industrial
areas where high performance torque needs to be achieved.
Spline fasteners help tighten high strength bolts to high torque loads.
They help lower the force required to turn standard
fasteners by allowing the torque load to be moved away
from the corners, helping prevent fastener rounding.
They also turn fasteners with damaged corners.
Spline helps reduce foreign object debris (FOD) by having a
precise fit between the fastening tool and its fastener.
and an easy to clean surface.
Fractional sizes 11/32" and smaller do not have the ASD feature.
Product #
J1208SPL
J1209SPL
J1210SPL
J1211SPL
J1212SPL
J1214SPL
J1216SPL
J1218SPL
J1220SPL
J1222SPL
J1224SPL
J1226SPL
J1228SPL
J1230SPL
J1232SPL
Size
Throat
(in) Depth (in) (B)
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
13/32
7/16
15/32
1/2
17/32
9/16
19/32
5/8
43/64
11/16
47/64
3/4
51/64
13/16
55/64
7/8
15/16
15/16
1
1
1-1/16
Outside Head
Head
Outside Head
Head
35/64
5/32
25/64
11/64
39/64
11/64
7/16
11/64
11/16
11/64
31/64
3/16
25/32
3/16
35/64
7/32
27/32
13/64
37/64
15/64
15/16
7/32
43/64
17/64
1-5/64
1/4
47/64
5/16
1-13/64
9/32
13/16
11/32
1-21/64
19/64
57/64
3/8
1-7/16
5/16
63/64
13/32
1-37/64
11/32
1-5/64
15/32
1-23/32
23/64
1-3/16
33/64
1-27/32
3/8
1-1/4
17/32
1-31/32
25/64
1-23/64
37/64
2-3/32
27/64
1-29/64
37/64
a sPline enD Fits manY
tYPes oF Fasteners
Overall Weight
Length (in) (lbs)
4-29/32
0.06
5-5/32
0.07
5-27/64
0.08
5-21/32
0.09
5-59/62
0.10
6-29/32
0.14
7-29/32
0.20
8-53/64
0.26
9-35/64
0.34
10-19/64 0.42
11-3/64
0.50
11-53/64 0.59
12-17/32 0.73
13-5/16
0.90
14-1/16
1.10
One wrench replaces
many wrenches.
Spline End Wrenches are versitle tools that
handle several types of fasteners better than
conventional wrenches.
>
One Spline End wrench can replace many
because the innovative spline end can grab and
turn several types of fasteners.
>
The contact points for spline end sockets are
always away from the corners of the fastener.
This design, by its nature, reduces the problem
of rounding.
>
582
A better grip on
rounded fasteners.
The same grip also turns previously-rounded
fasteners better, because the splines grip the
head along the flat edge.
Product #: J1200-90ASD
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-3/8
6
7
8
8-7/8
9-1/2
10-1/4
11
11-7/8
12-1/2
13-1/4
14
15-1/4
15-7/8
16-7/8
17-5/8
18-1/2
19-3/8
20-1/4
23
23
25
25
28
28
29-1/2
29-1/2
29-1/2
29-1/2
31-1/2
31-1/2
>
>
>
Satin finiSh combination
Size (in)
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
2-1/16
2-1/8
2-3/16
2-1/4
2-3/8
2-1/2
Tool Roll
Satin finish provides corrosion resistance and a slip-resistant grip.
Anti-Slip Design (ASD) open end. Fractional sizes 11/32" and
smaller and 1-15/16" and larger do not have the ASD feature.
Weight (lbs): 124
ASME B107.100
Wrenches
Contents
J1210A
J1212ASD
J1214ASD
J1216ASD
J1218ASD
J1220ASD
J1222ASD
J1224ASD
J1226ASD
J1228ASD
J1230ASD
J1232ASD
J1234ASD
J1236ASD
J1240ASD
J1242
J1244
J1246
J1248
J1252
J1254
J1256
J1258
J1260
J1264
J1266
J1268
J1270
J1272
J1276
J1280
J25TR34C
>
>
fastener in place.
>
>
Made in USA
rounding.
583
Wrenches
Product #: J1200-80ASD
Contents
J1208A
J1210A
J1212ASD
J1214ASD
J1216ASD
J1218ASD
J1220ASD
J1222ASD
J1224ASD
J1226ASD
J1228ASD
J1230ASD
J1232ASD
J1234ASD
J1236ASD
J1240ASD
J1242
J1244
J1246
J1248
J1252
J1254
J1256
J1258
J1260
J1264
Size (in)
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
4-7/8
5-3/8
6
7
8
8-7/8
9-1/2
10-1/4
11
11-7/8
12-1/2
13-1/4
14
15-1/4
15-7/8
16-7/8
17-5/8
18-1/2
19-3/8
20-1/4
23
23
25
25
28
28
>
>
>
>
>
Anti-Slip Design (ASD) open end. Fractional sizes 11/32" and
smaller and sizes 1-5/16" and larger do not have the ASD feature.
Weight (lbs): 57.42
ASME B107.100
ProDuCt Features anD beneFits –
584
>
High performance drive configuration allows for quick
and easy socket engagement to the fastener flats, not
the corners.
>
Employs a radius-corner design, shifting contact
area and stress away from the fastener corners and
distributing contact stresses over a large area of the
socket, minimizing slippage.
>
The internal design minimizes fastener rounding, helps
to extend fastener life, and allows the user to more
easily turn worn, rounded, or rusted fasteners.
18 PieCe metriC Combination asD WrenCh set - 12 Point
Product #: J1200R-MASD
Size (mm)
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-5/32
5-13/32
5-21/32
5-29/32
6-29/32
7-45/64
7-29/32
8-13/16
9-5/32
9-35/64
10-9/32
10-11/16
11-1/32
11-27/64
11-13/16
12-17/32
12-59/64
13-5/16
>
>
>
Weight (lbs): 8.1
Wrenches
Contents
J1207MA
J1208MA
J1209MA
J1210MASD
J1211MASD
J1212MASD
J1213MASD
J1214MASD
J1215MASD
J1216MASD
J1217MASD
J1218MASD
J1219MASD
J1220MASD
J1221MASD
J1222MASD
J1223MASD
J1224MASD
J25TR42C
>
>
ASME B107.100
Product #: J1200F-HD
Contents
J1242
J1244
J1246
J1248
J1252
J1254
J1256
J1258
J1260
J1264
J1266
J1268
J1270
J1272
J1276
J1280
Size (in)
1-5/16
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
2-1/16
2-1/8
2-3/16
2-1/4
2-3/8
2-1/2
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
17-5/8
18-1/2
19-3/8
20-1/4
23
23
25
25
28
28
29-1/2
29-1/2
29-1/2
29-1/2
31-1/2
31-1/2
>
>
>
>
>
>
The box end is countersunk for easy application to the fastener.
Weight (lbs): 113.5
16 PieCe Combination WrenCh set - 12 Point
ASME B107.100
Made in USA
585
Wrenches
Product #: J1200FASD
Contents
J1210A
J1212ASD
J1214ASD
J1216ASD
J1218ASD
J1220ASD
J1222ASD
J1224ASD
J1226ASD
J1228ASD
J1230ASD
J1232ASD
J1234ASD
J1236ASD
J1240ASD
J25TR34C
Size (in)
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-3/8
6
7
8
8-7/8
9-1/2
10-1/4
11
11-7/8
12-1/2
13-1/4
14
15-1/4
15-7/8
16-7/8
>
>
>
>
>
Anti-Slip Design (ASD) open end. Fractional sizes
11/32" and smaller do not have the ASD feature.
Weight (lbs): 9.75
ASME B107.100
>
>
Product #: J1200F-MASD
Contents
J1207MA
J1208MA
J1209MA
J1210MASD
J1211MASD
J1212MASD
J1213MASD
J1214MASD
J1215MASD
J1216MASD
J1217MASD
J1218MASD
J1219MASD
J1220MASD
J1221MASD
J25TR41C
Size (mm)
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-5/32
5-13/32
5-21/32
5-29/32
6-29/32
7-45/64
7-29/32
8-13/16
9-5/32
9-35/64
10-9/32
10-11/16
11-1/32
11-27/64
11-13/16
>
>
>
Weight (lbs): 4.25
ASME B107.100
586
Product #: J1200P-MASD
Size (mm)
7
8
10
12
14
16
18
20
22
24
26
28
29
30
32
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-5/32
5-13/32
5-29/32
7-45/64
8-13/16
9-35/64
10-11/16
11-27/64
12-17/32
13-5/16
14-41/64
15-35/64
15-55/64
15-55/64
16-59/64
>
>
>
Weight (lbs): 4.25
Wrenches
Contents
J1207MA
J1208MA
J1210MASD
J1212MASD
J1214MASD
J1216MASD
J1218MASD
J1220MASD
J1222MASD
J1224MASD
J1226MASD
J1228MASD
J1229MASD
J1230MASD
J1232MASD
J25TR41C
>
>
ASME B107.100
Product #: J1200GASD
Contents
J1214ASD
J1216ASD
J1218ASD
J1220ASD
J1222ASD
J1224ASD
J1226ASD
J1228ASD
J1230ASD
J1232ASD
J25TR05C
Size (in)
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
7
8
8-7/8
9-1/2
10-1/4
11
11-7/8
12-1/2
13-1/4
14
>
>
>
>
>
Weight (lbs): 4.88
ASME B107.100
>
>
Product #: J1200K-MASD
Contents
J1210MASD
J1211MASD
J1212MASD
J1213MASD
J1214MASD
J1215MASD
J1216MASD
J1217MASD
J1218MASD
J1219MASD
J25TR39C
Size (mm)
10
11
12
13
14
15
16
17
18
19
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-29/32
6-29/32
7-45/64
7-29/32
8-13/16
9-5/32
9-35/64
10-9/32
10-11/16
11-1/32
>
>
>
Weight (lbs): 2.71
ASME B107.100
Made in USA
587
>
>
Wrenches
Product #: J1200GHASD
Contents
J1214HASD
J1216HASD
J1218HASD
J1220HASD
J1222HASD
J1224HASD
J1226HASD
J1228HASD
J1230HASD
J1232HASD
J25TR05C
Size (in)
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
Tool Roll
Point Count
6
6
6
6
6
6
6
6
6
6
Overall Length (in)
7
8
8-7/8
9-1/2
10-1/4
11
11-7/8
12-1/2
13-1/4
14
>
>
>
6 point box end allows for large wrench to fastener contact
area which helps prevent rounding of the fastener.
Weight (lbs): 4.88
ASME B107.100
>
>
Product #: J1200MHASD
Contents
J1210MHASD
J1211MHASD
J1212MHASD
J1213MHASD
J1214MHASD
J1215MHASD
J1216MHASD
J1217MHASD
J1218MHASD
J1219MHASD
J25TR39C
Size (mm)
10
11
12
13
14
15
16
17
18
19
Tool Roll
Point Count
6
6
6
6
6
6
6
6
6
6
Overall Length (in)
5-29/32
6-29/32
7-45/64
7-29/32
8-13/16
9-5/32
9-35/64
10-9/32
10-11/16
11-1/32
>
>
>
Weight (lbs): 3.46
ASME B107.100
>
>
Product #: J1200H-MASD
Contents
J1207MA
J1208MA
J1209MA
J1210MASD
J1211MASD
J1212MASD
J1213MASD
J1214MASD
J1215MASD
J25TR38C
Size (mm)
7
8
9
10
11
12
13
14
15
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-5/32
5-13/32
5-21/32
5-29/32
6-29/32
7-45/64
7-29/32
8-13/16
9-5/32
>
>
>
Weight (lbs): 1.43
ASME B107.100
588
8 PieCe short Combination WrenCh set - 6 Point
Contents
J1204EF
J1205EF
J1206EF
J1208EF
J1209EF
J1210EF
J1211EF
J1212EF
J25TR12C
Size (in)
1/8
5/32
3/16
1/4
9/32
5/16
11/32
3/8
Tool Roll
Point Count
6
6
6
6
6
6
6
6
Overall Length (in)
2-49/64
2-57/64
3-1/4
3-17/64
3-7/16
4-1/8
4-7/16
4-5/8
>
>
>
>
Compact shank design and short length
for access in confined spaces.
Standard open end.
Weight (lbs): 0.35
Wrenches
>
>
Product #: J1200EF
ASME B107.100
>
>
Product #: J1200HASD
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Tool Roll
Point Count
12
12
12
12
12
12
12
Overall Length (in)
6
7
8
8-7/8
9-1/2
10-1/4
11
>
>
>
ASME B107.100
Contents
J1212ASD
J1214ASD
J1216ASD
J1218ASD
J1220ASD
J1222ASD
J1224ASD
J25TR37C
Weight (lbs): 2.40
FaCom® 16 PieCe metriC Combination short WrenCh set
>
Product #: FM-39.JE16T
Contents
FM-39.3.2H
FM-39.4H
FM-39.5H
FM-39.5.5H
FM-39.6
FM-39.7
FM-39.8
FM-39.9
FM-39.10
FM-39.11
FM-39.12
FM-39.13
FM-39.14
FM-39.15
FM-39.16
FM-39.17
Size (mm)
3.2
4
5
5.5
6
7
8
9
10
11
12
13
14
15
16
17
Point Count
6
6
6
6
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
3-1/32
3-1/32
3-7/32
3-5/16
3- 17/32
3-17/32
3-19/32
3-27-32
4-1/16
4-9/32
5
5-9/16
5-25/32
5-31/32
6-7/32
6-1/2
Made in USA
>
>
>
>
>
>
Short shank and compact heads help
improve access to tight spots.
Box end angled at 15°.
area which helps prevent rounding the fastener.
Weight (lbs): 1.58
589
satin Combination WrenChes - 6 Point
Wrenches
>
>
>
>
Satin finish provides corrosion resistance
and a slip-resistant grip.
Fractional sizes 11/32" and smaller and sizes
1-5/16" and larger do not have the ASD feature.
Product #
J1208HA
J1210HA
J1211HA
J1212HASD
J1214HASD
J1216HASD
J1218HASD
J1220HASD
J1222HASD
J1224HASD
J1226HASD
J1228HASD
J1230HASD
J1232HASD
J1234HASD
J1236HASD
J1238HASD
J1240HASD
Throat
Outside Head
Head
Outside Head
Head
Overall Weight
Size (in) Depth (in) (B) Width (in) (C) Thickness (in) (D) Width (in) (C1) Thickness (in) (D1) Length (in) (lbs)
1/4
19/64
39/64
3/16
27/64
15/64
4-7/8
0.04
5/16
5/16
45/64
3/16
33/64
17/64
5-3/8
0.08
11/32
11/32
25/32
3/16
17/32
7/32
5-5/8
0.08
3/8
13/32
13/16
3/16
39/64
5/16
6
0.10
7/16
17/32
15/16
15/64
43/64
21/64
7
0.14
1/2
39/64
1-5/64
1/4
49/64
11/32
8
0.18
9/16
11/16
1-3/16
9/32
27/32
23/64
8-7/8
0.21
5/8
3/4
1-21/64
19/64
15/16
13/32
9-1/2
0.29
11/16
13/16
1-29/64
5/16
1-1/64
7/16
10-1/4
0.35
3/4
57/64
1-37/64
11/32
1-3/32
15/32
11
0.41
13/16
31/32
1-11/16
23/64
1-11/64
1/2
11-7/8
0.54
7/8
1-1/16
1-13/16
3/8
1-1/4
33/64
12-1/2
0.64
15/16
1-1/8
1-29/32
13/32
1-27/64
37/64
13-1/4
0.74
1
1-13/64
2-1/64
13/32
1-13/32
37/64
14
0.95
1-1/16
1-9/32
2-9/64
45/64
1-31/64
39/64
15-1/4
1.13
1-1/8
1-23/64
2-17/64
3/4
1-21/32
41/64
15-7/8
1.38
1-3/16
1-23/64
2-25/64
3/4
1-21/32
21/32
15-7/8
1.54
1-1/4
1-1/2
2-33/64
53/64
1-3/4
45/64
16-59/64 1.89
ASME B107.100
satin metriC Combination WrenChes - 6 Point
>
>
>
>
>
Metric Sizes 9 mm and smaller do not have ASD feature.
Throat
Outside Head
Head
Outside Head
Head
Product #
Size (mm) Depth (in) (B) Width (in) (C) Thickness (in) (D) Width (in) (C1) Thickness (in) (D1)
J1206MHA
6
19/64
35/64
5/32
25/64
5/32
J1207MHA
7
19/64
39/64
11/64
7/16
3/16
J1208MHA
8
3/8
11/16
11/64
31/64
13/64
J1209MHA
9
13/32
49/64
3/16
17/32
7/32
J1210MHASD
10
31/64
7/8
7/32
41/64
5/16
J1211MHASD
11
17/32
59/64
15/64
11/16
21/64
J1212MHASD
12
9/16
1
1/4
47/64
21/64
J1213MHASD
13
39/64
1-1/32
11/32
25/32
1/4
J1214MHASD
14
11/16
1-3/16
9/32
55/64
23/64
J1215MHASD
15
3/4
1-1/4
19/64
57/64
23/64
J1216MHASD
16
49/64
1-21/64
5/16
15/16
13/32
J1217MHASD
17
53/64
1-29/64
21/64
1-1/32
7/16
J1218MHASD
18
55/64
1-33/64
11/32
1-5/64
7/16
J1219MHASD
19
29/32
1-37/64
11/32
1-7/64
31/64
590
Overall Weight
Length (in) (lbs)
4-59/64
0.05
4-53/64
0.06
5-13/32
0.07
5-21/32
0.08
5-29/32
0.13
6-29/32
0.14
7-45/64
0.17
7-29/32
0.18
8-13/16
0.22
9-5/32
0.25
9-35/64
0.26
10-9/32
0.38
10-11/16 0.41
11-1/32
0.46
ASME B107.100
satin Combination WrenChes - 12 Point
>
>
>
>
Throat
Outside Head
Head
Outside Head
Head
Overall
Weight
1/4
19/64
39/64
3/16
27/64
15/64
4-7/8
0.04
9/32
23/64
41/64
3/16
29/64
7/32
5-5/32
0.06
5/16
3/8
45/64
3/16
33/64
17/64
5-3/8
0.08
11/32
13/32
25/32
3/16
17/32
7/32
5-5/8
0.08
3/8
13/32
13/16
3/16
39/64
5/16
6
0.11
7/16
17/32
15/16
15/64
43/64
21/64
7
0.14
1/2
39/64
1-5/16
1/4
49/64
11/32
8
0.18
9/16
11/16
1-3/16
9/32
3/4
23/64
8-7/8
0.21
5/8
3/4
1-21/64
19/64
15/16
13/32
9-1/2
0.29
11/16
13/16
1-29/64
5/16
1-1/64
7/16
10-1/4
0.35
3/4
57/64
1-37/64
11/32
1-3/32
15/32
11
0.41
13/16
31/32
1-11/16
23/64
1-11/64
1/2
11-7/8
0.54
7/8
1-1/16
1-13/16
3/8
1-1/4
33/64
12-1/2
0.65
15/16
1-1/8
1-29/32
13/32
1-27/64
37/64
13-1/4
0.74
1
1-13/64
2-1/64
13/32
1-13/32
37/64
14
0.95
1-1/16
1-9/32
2-9/64
29/64
1-31/64
39/64
15-1/4
1.13
1-1/8
1-23/64
2-17/64
15/32
1-21/32
41/64
15-7/8
1.38
1-3/16
1-23/64
2-25/64
3/4
1-21/32
21/32
15-7/8
1.54
1-1/4
1-1/2
2-33/64
33/64
1-3/4
45/64
16-7/8
1.89
1-5/16
1-37/64
2-41/64
17/32
1-27/32
47/64
17-5/8
2.15
1-3/8
1-21/32
2-49/64
35/64
1-15/16
25/32
18-1/2
2.34
1-7/16
1-47/64
2-57/64
37/64
2-3/64
51/64
19-3/8
2.67
1-1/2
1-51/64
3-1/64
39/64
2-1/8
53/64
20-1/4
3.18
1-5/8
1-63/64
3-25/64
21/32
2-13/32
29/32
23
4.64
1-11/16
1-63/64
3-25/64
21/32
2-13/32
29/32
23
4.74
1-3/4
2-11/64
3-41/64
45/64
2-39/64
31/32
25
5.64
1-13/16
2-11/64
3-41/64
45/64
2-39/64
31/32
25
5.64
1-7/8
2-25/64
4-1/64
49/64
2-57/64
1-1/16
28
7.46
2
2-25/64
4-1/64
49/64
2-57/64
11/16
28
7.35
2-1/16
2-45/64
4-33/64
27/32
3-1/4
13/16
29-1/2
9.88
2-1/8
2-45/64
4-33/64
27/32
3-1/4
13/16
29-1/2
9.74
2-3/16
2-45/64
4-33/64
27/32
3-1/4
1-3/16
29-1/2
9.45
2-1/4
2-45/64
4-33/64
27/32
3-1/4
1-3/16
29-1/2
8.25
2-3/8
2-55/64
5
31/32
3-5/8
1-5/16
31-1/2
13.12
2-1/2
3
5
31/32
3-5/8
1-5/16
31-1/2
12.49
See pages 595 and 598 for larger sizes.
Made in USA
AS 954
Product #
J1208A
J1209A
J1210A
J1211A
J1212ASD
J1214ASD
J1216ASD
J1218ASD
J1220ASD
J1222ASD
J1224ASD
J1226ASD
J1228ASD
J1230ASD
J1232ASD
J1234ASD
J1236ASD
J1238ASD
J1240ASD
J1242
J1244
J1246
J1248
J1252
J1254
J1256
J1258
J1260
J1264
J1266
J1268
J1270
J1272
J1276
J1280
Wrenches
>
Fractional sizes 11/32" and smaller and sizes
1-5/16" and larger do not have the ASD feature.
ASME B107.100
591
satin metriC Combination WrenChes - 12 Point
Wrenches
>
>
>
>
>
Metric sizes 9 mm and smaller and sizes 36 mm
and larger do not have the ASD feature.
Product #
J1206MA
J1207MA
J1208MA
J1209MA
J1210MASD
J1211MASD
J1212MASD
J1213MASD
J1214MASD
J1215MASD
J1216MASD
J1217MASD
J1218MASD
J1219MASD
J1220MASD
J1221MASD
J1222MASD
J1223MASD
J1224MASD
J1225MASD
J1226MASD
J1227MASD
J1228MASD
J1229MASD
J1230MASD
J1232MASD
J1236M
J1241M
J1246M
J1250M
Throat
Outside Head
Head
Outside Head
Head
Size (mm) Depth (in) (B) Width (in) (C) Thickness (in) (D) Width (in) (C1) Thickness (in) (D1)
6
19/64
35/64
5/32
25/64
5/32
7
5/16
19/32
11/64
13/32
15/64
8
25/64
11/16
3/16
1/2
17/64
9
13/32
3/4
3/16
35/64
17/64
10
31/64
7/8
7/32
21/32
5/16
11
33/64
59/64
15/64
11/16
21/64
12
9/16
1
1/4
47/64
11/32
13
39/64
1-1/32
1/4
25/32
11/32
14
11/16
1-3/16
9/32
55/64
23/64
15
3/4
1-1/4
19/64
7/8
23/64
16
3/4
1-21/64
5/16
15/16
13/32
17
53/64
1-25/64
21/64
1-1/32
7/16
18
55/64
1-33/64
11/32
1-1/16
29/64
19
29/32
1-37/64
11/32
1-7/64
15/32
20
63/64
1-11/16
23/64
1-3/16
31/64
21
63/64
1-11/16
23/64
1-3/16
31/64
22
1-3/64
1-25/32
3/8
1-17/64
1/2
23
1-1/8
1-57/64
13/32
1-11/32
35/64
24
1-1/8
1-57/64
13/32
1-11/32
35/64
25
1-13/64
2
27/64
1-27/64
19/32
26
1-13/64
2-1/64
27/64
1-27/64
19/32
27
1-7/32
2-9/64
29/64
1-31/64
39/64
28
1-23/64
2-17/64
15/32
1-21/32
41/64
29
1-23/64
2-17/64
15/32
1-21/32
41/64
30
1-23/64
2-17/64
15/32
1-21/32
41/64
32
1-1/2
2-33/64
33/64
1-49/64
45/64
36
1-47/64
2-57/64
17/32
2-3/64
51/64
41
2-1/64
3-25/64
41/64
2-27/64
59/64
46
2-11/64
3-41/64
43/64
2-39/64
31/32
50
2-25/64
4-1/64
47/64
2-57/64
1-1/16
Overall
Weight
Length (in)
(lbs)
4-29/32
0.05
5-5/32
0.06
5-13/32
0.07
5-21/32
0.08
5-29/32
0.11
6-29/32
0.15
7-45/64
0.18
7-29/32
0.21
8-13/16
0.29
9-5/32
0.25
9-35/64
0.26
10-9/32
0.38
10-11/16
0.41
11-1/32
0.46
11-27/64
0.55
11-13/16
0.54
12-17/32
0.62
12-59/64
0.77
13-5/16
0.77
14-1/16
0.85
14-41/64
0.97
15-15/64
1.17
15-35/64
1.37
15-55/64
1.39
15-55/64
1.41
16-59/64
1.82
19-3/8
2.77
23
4.34
25
5.5
28
6.97
ASME B107.100
ProDuCt Features anD beneFits –
592
>
High performance drive configuration allows for quick
and easy socket engagement to the fastener flats, not
the corners.
>
Employs a radius-corner design, shifting contact
area and stress away from the fastener corners and
distributing contact stresses over a large area of the
socket, minimizing slippage.
>
The internal design minimizes fastener rounding, helps
to extend fastener life, and allows the user to more
easily turn worn, rounded, or rusted fasteners.
short satin Combination WrenChes - 6 Point
>
>
>
>
Throat
Outside Head
Head
Outside Head
Head
Overall Weight
1/8
11/64
11/32
1/8
9/32
1/8
2-49/64
0.01
5/32
13/64
13/32
1/8
19/64
1/8
2-57/64
0.01
3/16
15/64
15/32
1/8
11/32
5/32
3-1/4
0.02
7/32
1/4
1/8
1/8
3/8
5/32
3-1/8
0.02
1/4
19/64
9/16
5/32
27/64
3/16
3-17/64
0.03
9/32
21/64
5/8
5/32
7/16
3/16
3-7/16
0.04
5/16
3/8
11/16
5/32
1/2
1/4
4-1/8
0.04
11/32
25/64
47/64
3/16
17/32
1/4
4-7/16
0.05
3/8
7/16
53/64
3/16
37/64
1/4
4-5/8
0.07
7/16
33/64
7/8
7/32
5/8
9/32
5-1/16
0.12
1/2
19/32
1
7/32
3/4
5/16
5-1/4
0.16
9/16
43/64
1-1/8
1/4
51/64
11/32
5-7/8
0.16
5/8
47/64
1-17/64
9/32
57/64
3/8
6-3/16
0.17
ASME B107.100
FaCom® short satin metriC Combination WrenChes - 6 Point
>
>
>
Product #
J1204EF
J1205EF
J1206EF
J1207EF
J1208EF
J1209EF
J1210EF
J1211EF
J1212EF
J1214EF
J1216EF
J1218EF
J1220EF
Wrenches
>
Standard open end.
Product #
FM-39.3.2H
FM-39.4H
FM-39.5H
FM-39.5.5H
Size (mm)
3.2
4
5
5.5
Outside Head
Width (in) (C)
25/64
25/64
15/32
15/32
Head
Thickness (in) (D)
1/8
1/8
5/32
5/32
Made in USA
Outside Head
Width (in) (C1)
9/32
5/16
23/64
3/8
Head
Overall
Thickness (in) (D1) Length (in) Weight (lbs)
1/8
3-1/32
0.02
1/8
3-1/32
0.01
5/32
3-7/32
0.02
5/32
3-5/16
0.02
593
short satin Combination WrenChes - 12 Point
Wrenches
>
>
>
>
>
Standard open end.
Product #
J1208TF
J1209TF
J1210TF
J1211TF
J1212TF
J1214TF
J1216TF
J1218TF
J1220TF
J1222TF
J1224TF
Size (in)
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Throat
Outside Head
Head
Outside Head
Head
Overall
Depth (in) (B) Width (in) (C) Thickness (in) (D) Width (in) (C1) Thickness (in) (D1) Length (in)
19/64
17/32
1/8
25/64
5/16
3-1/4
21/64
5/8
5/32
7/16
3/16
3-7/16
3/8
41/64
3/16
5/32
7/32
3-1/2
25/64
47/64
3/16
17/32
1/4
4-7/16
7/16
3/4
13/64
35/64
1/4
4-5/8
33/64
7/8
15/64
5/8
17/64
5-1/16
19/32
1
1/4
23/64
19/64
5-11/16
43/64
1-1/8
9/32
51/64
21/64
5-13/16
47/64
1-17/64
23/64
57/64
11/32
6-3/16
13/16
1-25/64
11/32
31/32
3/8
7-1/16
57/64
1-33/64
3/8
1-3/64
13/32
8-1/16
Weight
(lbs)
0.02
0.04
0.04
0.05
0.07
0.10
0.11
0.16
0.18
0.23
0.33
ASME B107.100
FaCom® short satin metriC Combination
WrenChes - 12 Point
>
>
>
>
>
Product #
FM-39.6
FM-39.7
FM-39.8
FM-39.9
FM-39.10
FM-39.11
FM-39.12
FM-39.13
FM-39.14
FM-39.15
FM-39.16
FM-39.17
594
Size (mm)
6
7
8
9
10
11
12
13
14
15
16
17
Outside Head
Head
Width (in) (C) Thickness (in) (D)
19/32
5/32
19/32
5/32
43/64
11/64
49/64
3/16
27/32
13/64
15/16
13/64
1-1/32
7/32
1-7/64
15/64
1-3/16
15/64
1-17/64
1/4
1-23/64
17/64
1-7/16
17/64
Outside Head
Width (in) (C1)
13/32
29/64
31/64
35/64
39/64
21/32
45/64
49/64
13/16
7/8
59/64
63/64
Head
Thickness (in) (D1)
13/64
13/64
15/64
15/64
1/4
17/64
19/64
5/16
21/64
23/64
3/8
25/64
Overall
Length (in) Weight (lbs)
3- 17/32
0.04
3-17/32
0.03
3-19/32
0.04
3-27-32
0.05
4-1/16
0.06
4-9/32
0.08
5
0.1
5-9/16
0.12
5-25/32
0.15
5-31/32
0.17
6-7/32
0.19
6-1/2
0.23
satin x-large Combination WrenChes - 12 Point
>
>
Product #
J1282
J1284
J1288
Size (in)
2-9/16
2-9/16
2-3/4
Outside Head Width Outside Head Width
(in) (C)
(in) (C1)
4-1/2
3-5/8
4-3/4
3-3/4
4-3/4
3-3/4
Wrenches
>
>
>
>
For use on extra large fasteners.
Used in Mining, Oil and Gas, Industrial Construction.
Forged heads with machined openings.
12 point box end allows for fine indexing, helping to
improve speed and access. Fits 4, 6 and 12 point.
Box end is countersunk for easy
application to the fastener.
Head
Thickness (in) (D1)
1-9/16
1-5/8
1-5/8
Overall Length (in)
29-3/4
29-3/4
29-3/4
Weight (lbs)
13
13
13
satin x-large metriC Combination
WrenChes - 12 Point
>
>
>
>
>
>
Product #
J1255M
J1260M
J1265M
J1270M
Size (mm)
55
60
65
70
Outside Head Width Outside Head Width (in)
(in) (C)
(C1)
4-1/4
3-1/4
4-1/2
3-5/8
4-1/2
3-5/8
4-3/4
3-3/4
Made in USA
Head
Thickness (in) (D1)
1-3/16
1-9/16
1-9/16
1-5/8
28-3/4
10
29-3/4
13
29-3/4
13
29-3/4
13
595
Wrenches
15 PieCe metriC blaCk oxiDe Combination
asD WrenCh set - 12 Point
>
Product #: J1200F-MBASD
Contents
J1207MBA
J1208MBA
J1209MBA
J1210MBASD
J1211MBASD
J1212MBASD
J1213MBASD
J1214MBASD
J1215MBASD
J1216MBASD
J1217MBASD
J1218MBASD
J1219MBASD
J1220MBASD
J1221MBASD
J25TR40C
Size (mm)
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-5/32
5-13/32
5-21/32
5-29/32
6-29/32
7-45/64
7-29/32
8-13/16
9-5/32
9-35/64
10-9/32
10-11/16
11-1/32
11-27/64
11-13/16
>
>
>
>
Non-reflective black oxide finish for use where
non-plated products are required.
Weight (lbs): 5.10
Black oxide comBination
ASME B107.100
anti-sliP Design
Wrenches with the Anti-Slip Design (ASD) apply force to the
flat sides of the fasteners, and not the corners. This feature
helps to prevent rounding, and permits higher torques.
14 PieCe blaCk oxiDe Combination asD WrenCh set - 12 Point
>
Product #: J1200FBASD
Contents
J1212BASD
J1214BASD
J1216BASD
J1218BASD
J1220BASD
J1222BASD
J1224BASD
J1226BASD
J1228BASD
J1230BASD
J1232BASD
J1234BASD
J1238BASD
J1240BASD
J25TR41C
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
6
7
8-7/8
8-7/8
9-1/2
10-1/4
11
11-7/8
12-1/2
13-1/4
14
15-1/4
15-7/8
16-7/8
>
>
>
>
Weight (lbs): 9.70
ASME B107.100
596
7 PieCe blaCk oxiDe Combination asD WrenCh set - 12 Point
Product #: J1200HBASD
Contents
J1212BASD
J1214BASD
J1216BASD
J1218BASD
J1220BASD
J1222BASD
J1224BASD
J25TR37C
Wrenches
>
>
>
>
>
Non-reflective black oxide finish for use where non-plated products are required.
Weight (lbs): 2.25
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Tool Roll
Point Count
12
12
12
12
12
12
12
Overall Length (in)
6
7
8-7/8
8-7/8
9-1/2
10-1/4
11
ASME B107.100
blaCk oxiDe Combination WrenChes - 12 Point
Sizes 1-5/16" and larger do not have ASD feature.
Product #
J1212BASD
J1214BASD
J1216BASD
J1218BASD
J1220BASD
J1222BASD
J1224BASD
J1226BASD
J1228BASD
J1230BASD
J1232BASD
J1234BASD
J1236BASD
J1240BASD
J1242B
J1244B
J1246B
J1248B
J1252B
J1254B
J1256B
J1258B
J1260B
J1264B
Throat
Outside Head
Head
Outside Head
Head
Overall
Weight
3/8
27/64
13/16
7/32
39/64
5/16
6
0.10
7/16
17/32
15/16
1/4
43/64
21/64
7
0.22
1/2
39/64
1-5/64
17/64
49/64
11/32
8-7/8
0.26
9/16
11/16
1-3/16
19/64
27/32
23/64
8-7/8
0.21
5/8
3/4
1-21/64
5/16
15/16
13/32
9-1/2
0.29
11/16
13/16
1-29/64
11/32
1-1/4
7/16
10-1/4
0.35
3/4
57/64
1-37/64
23/64
1-3/32
15/32
11
0.41
13/16
31/32
1-11/16
3/8
1-11/64
1/2
11-7/8
0.54
7/8
1-1/16
1-13/16
13/32
1-1/4
17/32
12-1/2
0.64
15/16
1-1/8
1-29/32
1/8
1-11/32
9/16
13-1/4
0.74
1
1-13/64
2-1/64
29/64
1-13/32
19/32
14
0.95
1-1/16
1-9/32
2-9/64
15/32
1-31/64
5/8
15-1/4
1.13
1-1/8
1-23/64
2-17/64
33/64
1-21/32
41/64
15-7/8
1.38
1-1/4
1-1/2
2-33/64
17/32
1-3/4
45/64
16-7/8
1.89
1-5/16
1-37/64
2-41/64
17/32
2-1/8
47/64
17-5/8
2.15
1-3/8
1-21/32
2-49/64
35/64
1-15/76
25/32
18-1/2
2.34
1-7/16
1-47/64
2-57/64
37/64
23/64
51/64
19-3/8
2.67
1-1/2
1-3/4
3
5/8
2-1/8
53/64
20-1/8
2.15
1-5/8
1-63/64
3-25/64
21/32
2-13/32
29/32
23
4.64
1-11/16
1-63/64
3-25/64
21/32
2-13/32
29/32
23
4.74
1-3/4
1-3/4
3-41/64
45/64
2-39//64
31/32
25
5.64
1-13/16
1-13/16
3-41/64
45/64
2-39//64
31/32
25
5.59
1-7/8
1-7/8
4-1/64
49/64
2-57/64
1-1/16
28
7.46
2
2
4-1/64
49/64
2-57/64
1-1/16
28
7.35
Made in USA
AS 954
>
>
>
>
>
>
>
ASME B107.100
597
Wrenches
blaCk oxiDe metriC Combination WrenChes - 12 Point
>
>
>
>
>
>
>
12 point box end allows for fine indexing, helping to improve speed
and access. Fits 4, 6 and 12 point fasteners.
Inch sizes 1-5/16" and larger do not have ASD feature.
Product #
J1207MBA
J1208MBA
J1209MBA
J1210MBASD
J1211MBASD
J1212MBASD
J1213MBASD
J1214MBASD
J1215MBASD
J1216MBASD
J1217MBASD
J1218MBASD
J1219MBASD
J1220MBASD
J1221MBASD
J1222MBASD
J1223MBASD
J1224MBASD
Overall Weight
Length (in) (lbs)
5-5/32
0.04
5-13/32
0.07
5-21/32
0.08
5-29/32
0.13
6-29/32
0.14
7-45/64
0.17
7-29/32
0.18
8-13/16
0.22
9-5/32
0.25
9-35/64
0.26
10-9/32
0.38
10-11/16 0.41
11-1/32
0.46
11-27/64 0.55
11-13/16 0.54
12-17/32 0.62
12-59/64 0.77
13-5/16
0.77
ASME B107.100
blaCk oxiDe x-large Combination WrenChes - 12 Point
>
>
>
>
>
>
Black Oxide Finish.
Product #
J1290
J1292
J1294
J1296
J1298
J12100
J12104
J12108
J12112
J12116
J12120
J12124
J12128
598
Size
Throat
Outside Head
Head
Outside Head
Head
(mm) Depth (in) (B) Width (in) (C) Thickness (in) (D) Width (in) (C1) Thickness (in) (D1)
7
5/16
37/64
3/16
27/64
13/64
8
25/64
11/16
13/64
17/32
9/32
9
13/32
47/64
13/64
17/32
9/32
10
31/64
7/8
15/64
41/64
5/16
11
17/32
15/16
1/4
11/16
21/64
12
9/16
1-7/64
1/4
47/64
21/64
13
39/64
1-3/64
17/64
25/32
11/32
14
11/16
1-3/16
19/64
55/64
23/64
15
23/32
1-7/32
19/64
7/8
23/64
16
3/4
1-21/64
21/64
61/64
13/32
17
53/64
1-29/64
11/32
1-1/32
7/16
18
55/64
1-33/64
21/64
1-1/16
29/64
19
29/32
1-37/64
23/64
1-7/64
15/32
20
63/64
1-11/16
25/64
1-3/16
1/2
21
63/64
1-11/16
13/32
1-3/16
1/2
22
1-3/64
1-51/64
13/32
1-9/32
35/64
23
1-1/8
1-29/32
13/32
1-11/32
9/16
24
1-1/8
1-61/64
13/32
1-11/32
9/16
Size (in)
2-3/16
2-7/8
2-15/16
3
3-1/16
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
4
Outside Head Width
(in) (C)
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
5-1/2
7
7
7
7
7
7
7
Outside Head Width
(in) (C1)
4-1/4
4-3/4
4-3/4
4-3/4
4-3/4
4-3/4
5-1/2
5-1/2
5-7/8
5-7/8
6-1/8
6-1/8
6-1/8
Head
Thickness (in) (D1)
1-11/16
1-11/16
1-11/16
1-11/16
1-11/16
1-11/16
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
Overall Length
(in)
34
34
34
34
34
34
37
37
37
37
37
37
37
Weight (lbs)
18
18
18
18
18
18
35
35
35
35
35
35
35
blaCk oxiDe x-large metriC Combination
WrenChes - 12 Point
Black Oxide Finish.
12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point.
Product #
J1273M
J1275M
J1280M
Size (mm)
73
75
80
Outside Head Width
(in) (C)
5-1/2
5-1/2
5-1/2
Outside Head Width (in)
(C1)
4-3/4
4-3/4
4-3/4
Head
Thickness (in) (D1)
1-11/16
1-11/16
1-11/16
Overall Length
(in)
Weight (lbs)
34
18
34
18
34
18
Wrenches
>
>
>
>
>
>
7 PieCe Flex-heaD WrenCh set - 12 Point
Product #: J1270A
>
>
>
>
>
>
Use the swiveling box end to break or cinch bolts in difficult locations.
Heat-treated alloy steels produce a shank with high leverage.
Weight (lbs): 2.91
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Tool Roll
Overall Length (in)
6
6-7/8
7-3/4
8-5/8
9-1/2
10-3/8
11-1/4
flex head
Contents
J1270-12
J1270-14
J1270-16
J1270-18
J1270-20
J1270-22
J1270-24
J25TR01C
4 PieCe Flex-heaD WrenCh set - 12 Point
Product #: J1270B
>
>
>
>
>
>
Contents
J1270-14
J1270-16
J1270-18
J1270-20
J25TR18C
Use the swiveling box end to break or cinch bolts in difficult locations.
Weight (lbs): 0.88
Size (in)
7/16
1/2
9/16
5/8
Tool Roll
Overall Length (in)
6-7/8
7-3/4
8-5/8
9-1/2
Made in USA
599
satin Combination Flex-heaD WrenChes - 12 Point
Wrenches
>
>
>
>
>
Use the swiveling box end to break or
cinch bolts in difficult locations.
Product #
J1270-12
J1270-14
J1270-16
J1270-18
J1270-20
J1270-22
J1270-24
J1270-28
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
Throat Depth (in) (B)
27/64
1/2
37/64
21/32
23/32
51/64
7/8
1-1/64
Outside Head Width
(in) (C)
55/64
1
1-3/32
1-15/64
1-23/32
1-1/2
1-41/64
1-27/32
Head
Overall Length
Thickness (in) (D)
(in)
15/64
6
1/4
6-7/8
9/32
7-3/4
5/16
8-5/8
21/64
9-1/2
11/32
10-3/8
23/64
11-1/4
13/32
13
Weight (lbs)
0.14
0.20
0.25
0.36
0.46
0.58
0.46
0.93
FaCom® 3 PieCe Double Flex-heaD soCket WrenCh set
flex head
Product #: FF-66A.JU3
>
>
>
>
Satin chrome finish.
Spring-steadied pivoting 12 point socket.
Strength to ISO 1711-1, DIN 899, NF ISO 1711-1.
Weight (lbs): 1.55
Contents
FF-66A.1/2X9/1
FF-66A.3/8X7/1
FF-66A.5/8X3/4
Size (in)
1/2 x 9/16
3/8 x 7/16
5/8 x 3/4
Point Count
12
12
12
Overall Length (in)
9-1/4
6-1/2
11-1/4
FaCom® 9 PieCe Double
Flex-heaD soCket WrenCh set
Product #: FM-66A.JE9T
>
>
>
>
Weight (lbs): 4.35
Contents
FM-66A.6X7
FM-66A.8X9
FM-66A.10X11
FM-66A.12X13
FM-66A.14X15
FM-66A.16X17
FM-66A.18X19
FM-66A.20X22
FM-66A.21X23
600
Size (mm)
6 X 7
8 X 9
10 X 11
12 X 13
14 X 15
16 X 17
18 X 19
20 X 22
21 X 23
Point Count
12
12
12
12
12
12
12
12
12
Overall Length (in)
7-11/16
7-11/16
7-7/8
9-1/4
9-1/4
9-7/16
11-7/32
11-7/32
11-13/32
FaCom® satin Double Flex-heaD soCket WrenChes - 12 Point
Product #
FF-66A.3/8X7/1
FF-66A.1/2X9/1
FF-66A.5/8X3/4
Size (in) Outside Head Width (in) (C) Outside Head Width (in) (C1)
3/8 x 7/16
19/32
21/32
1/2 x 9/16
3/4
13/16
5/8 x 3/4
29/32
1-1/32
Overall Length (in)
6-1/2
9-1/4
11-1/4
Weight (lbs)
0.26
0.47
0.82
Wrenches
>
>
>
FaCom® satin metriC Double
Flex-heaD soCket WrenChes - 12 Point
>
>
>
Size (mm)
6 X 7
8 X 9
10 X 11
12 X 13
14 X 15
16 X 17
18 X 19
20 X 22
21 X 23
24 X 27
30 X 32
19/32
19/32
45/64
53/64
29/32
29/32
63/64
1-5/64
1-1/8
1-19/64
1-19/32
Outside Head Width (in) (C1)
29/64
35/64
21/32
3/4
55/64
15/16
1-1/32
1-13/64
1-15/64
1-7/16
1-11/16
Overall Length (in)
7-11/16
7-11/16
7-7/8
9-1/4
9-1/4
9-7/16
11-7/32
11-7/32
11-13/32
13-3/16
13-1/8
Weight (lbs)
0.20
0.21
0.24
0.42
0.44
0.49
0.77
0.76
0.82
1.15
1.32
angled socket
Product #
FM-66A.6X7
FM-66A.8X9
FM-66A.10X11
FM-66A.12X13
FM-66A.14X15
FM-66A.16X17
FM-66A.18X19
FM-66A.20X22
FM-66A.21X23
FM-66A.24X27
FM-66A.30X32
10 PieCe FaCom® angleD soCket WrenCh set
>
>
Product #: FF-75.JU10
Contents
FF-75.5/16
FF-75.3/8
FF-75.7/16
FF-75.1/2
FF-75.9/16
FF-75.5/8
FF-75.11/16
FF-75.3/4
FF-75.13/16
FF-75.7/8
Size (in)
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
Overall Length (in)
4-31/64
5-5/64
5-23/64
5-63/64
6-21/32
7-1/64
7-43/64
8-1/32
8-45/64
9-29/64
Made in USA
>
>
Satin finish.
Angle and through-hole design helps accommodate threaded rods
or a bar for extra leverage, without affecting wrench strength.
Deep recess at one end and open end socket
at the other fit over protruding studs.
Weight (lbs): 6.08
601
Wrenches
FaCom® satin angleD oPen-soCket
WrenChes - 6 Point x 6 Point
Product #
FF-75.1/4
FF-75.5/16
FF-75.3/8
FF-75.7/16
FF-75.1/2
FF-75.9/16
FF-75.5/8
FF-75.11/16
FF-75.3/4
FF-75.13/16
FF-75.7/8
FF-75.15/16
FF-75.1
Size (in)
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
Overall Length
(in)
Weight (lbs)
4-1/64
0.07
4-31/64
0.13
5-5/64
0.20
5-23/64
0.25
5-63/64
0.38
6-21/32
0.49
7-1/64
0.62
7-43/64
0.80
8-1/32
0.94
8-45/64
1.08
9-29/64
1.38
9-27/32
1.45
10-5/8
1.75
>
>
>
Satin finish.
angled socket
FaCom® satin metriC angleD oPen-soCket
WrenChes - 12 Point x 6 Point
602
Product #
FM-76.6
FM-76.7
FM-76.8
FM-76.9
FM-76.10
FM-76.11
FM-76.12
FM-76.13
FM-76.14
FM-76.15
FM-76.16
FM-76.17
FM-76.18
FM-76.19
FM-76.20
FM-76.21
FM-76.22
FM-76.23
FM-76.24
FM-76.25
FM-76.26
FM-76.27
FM-76.28
FM-76.29
FM-76.30
FM-76.31
FM-76.32
FM-76.33
FM-76.34
FM-76.35
FM-76.36
FM-76.38
Size (mm) Overall Length (in) Weight (lbs)
6
4-1/64
0.07
7
4-11/64
0.09
8
4-31/64
0.13
9
4-51/64
0.14
10
5-5/64
0.21
11
5-23/64
0.25
12
5-43/64
0.34
13
5-63/64
0.39
14
6-19/64
0.44
15
6-21/32
0.50
16
7-1/64
0.63
17
7-23/64
0.69
18
7-43/64
0.80
19
8-1/32
0.95
20
8-11/32
0.97
21
8-45/64
1.08
22
9-1/16
1.18
23
9-29/64
1.38
24
9-27/32
1.46
25
10-15/64
1.73
26
10-5/8
1.75
27
11-1/32
2.09
28
11-27/64
2.09
29
11-13/16
2.31
30
12-13/64
2.87
31
12-19/32
3.05
32
12-63/64
3.09
33
13-25/64
3.26
34
13-25/32
3.42
35
14-11/64
3.59
36
14-9/16
3.75
38
15-23/64
4.59
>
>
>
Satin finish.
7 PieCe box WrenCh set - 12 Point
Product #: J1100R
>
>
>
Contents
J1170
J1171
J1172
J1173
J1174
J1175
J1176
J25TR32C
Weight (lbs): 4.23
Size (in)
Point Count
5/16 x 3/8
12
7/16 x 1/2
12
9/16 x 5/8
12
11/16 x 3/4
12
13/16 x 7/8
12
15/16 x 1
12
1-1/16 x 1-1/8
12
Tool Roll
Wrenches
>
Overall Length (in)
6-15/16
8-1/16
9-7/16
11-1/8
13-1/8
15-1/8
17-1/2
ASME B107.100
box end
5 PieCe box WrenCh set - 12 Point
Product #: J1100G
>
>
>
>
Contents
J1170
J1171
J1172
J1173
J1174
J25TR04C
Weight (lbs): 2.20
Size (in)
5/16 x 3/8
7/16 x 1/2
9/16 x 5/8
11/16 x 3/4
13/16 x 7/8
Tool Roll
Point Count
12
12
12
12
12
Overall Length (in)
6-15/16
8-1/16
9-7/16
11-1/8
13-1/8
ASME B107.100
Made in USA
603
11 PieCe metriC box WrenCh set - 12 Point
Wrenches
Product #: J1100S-M
>
>
>
>
>
Contents
J1050M
J1051M
J1053M
J1057M
J1061M
J1064M
J1065M
J1072M
J1073M
J1077M
J1079M
J25TR44C
Offset box end allows access to recessed fasteners
and keeps hands clear of obstructions.
Weight (lbs): 7.40
Size (mm)
6 x 7
8 x 9
10 x 11
12 x 13
14 x 15
16 x 18
17 x 19
21 x 24
22 x 24
27 x 30
30 x 32
Tool Roll
Point Count
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
5-49/64
6-49/64
7-31/32
8-55/64
9-45/64
10-11/16
11-23/64
13-25/64
13-45/64
15-59/64
17-13/64
Box End
ASME B107.100
7 PieCe metriC box WrenCh set - 12 Point
Product #: J1100D-M
>
>
>
>
>
Contents
J1050M
J1051M
J1053M
J1057M
J1061M
J1064M
J1065M
J25TR43C
Weight (lbs): 2.04
Size (mm)
6 x 7
8 x 9
10 x 11
12 x 13
14 x 15
16 x 18
17 x 19
Tool Roll
Point Count
12
12
12
12
12
12
12
Overall Length (in)
5-49/64
6-49/64
7-31/32
8-55/64
9-45/64
10-11/16
11-23/64
ASME B107.100
604
7 PieCe oFFset box WrenCh set - 12 Point
Product #: J1000G-500
>
>
>
>
Contents
J1012-500
J1016-500
J1018-500
J1022-500
J1026-500
J1030-500
J1034-500
J25TR32C
Weight (lbs): 3.84
Size (in)
Point Count
3/8 x 7/16
12
1/2 x 9/16
12
9/16 x 5/8
12
11/16 x 3/4
12
13/16 x 7/8
12
15/16 x 1
12
1-1/16 x 1-1/8
12
Tool Roll
Wrenches
>
Overall Length (in)
7-3/4
8-7/8
9-1/2
11-3/16
12-11/16
14-3/8
16-3/4
ASME B107.100
box end
6 PieCe DeeP oFFset box WrenCh set - 12 Point
Product #: J8100C
>
>
>
>
>
>
Contents
J8180
J8181
J8182
J8183A
J8184
J8185
J25TR19C
60° deep offset helps improve access
to deeply recessed fasteners.
Offset handle helps keep knuckles clear
of obstruction to help save time.
Weight (lbs): 3.33
Size (in)
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
11/16 x 13/16
3/4 x 7/8
15/16 x 1
Tool Roll
Point
Count
12
12
12
12
12
12
Overall
Length (in)
7-3/4
9
10-1/4
11-1/2
12-3/4
14
ASME B107.100
Made in USA
605
8 PieCe blaCk oxiDe box WrenCh set - 12 Point
Wrenches
Product #: J1100MB
>
>
>
>
Weight (lbs): 5.39
Box End
Contents
J1120LB
J1125LB
J1130LB
J1135B
J1140B
J1145B
J1150B
J1151B
J25TR27C
Size (in)
Point Count
5/16 x 3/8
12
7/16 x 1/2
12
9/16 x 5/8
12
11/16 x 3/4
12
13/16 x 7/8
12
15/16 x 1
12
1-1/16 x 1-1/8
12
1-1/16 x 1-1/4
12
Tool Roll
Overall Length (in)
6-15/16
8-1/16
9-7/16
11-1/4
13-7/8
15-1/2
17-1/4
18-1/4
FaCom® 5 PieCe metriC obstruCtion
box WrenCh set
Product #: FM-57.JE5
>
>
>
>
>
Satin finish provides corrosion resitance
and slip-resistant grip.
Half-moon shape helps improve access to
hidden, difficult to reach locations.
Weight (lbs): 1.80
Contents
FM-57.10X12
FM-57.11X13
FM-57.14X17
FM-57.16X18
FM-57.19X22
606
Size (mm)
10 x 12
11 x 13
14 x 17
16 x 18
19 x 22
Point Count
12
12
12
12
12
Overall Length (in)
5-5/8
6-1/2
7-17/32
8-3/4
9-31/32
Full Polish Double box WrenChes - 12 Point
>
>
Product #
J1170
J1171
J1126L
J1172
J1173
J1139
J1174
J1175
J1176
Size (in)
5/16 x 3/8
7/16 x 1/2
1/2 x 9/16
9/16 x 5/8
11/16 x 3/4
3/4 x 7/8
13/16 x 7/8
15/16 x 1
1-1/16 x 1-1/8
Outside Head
Width (in) (C)
37/64
3/4
7/8
15/16
17/64
1-1/4
1-19/64
1-15/32
1-37/64
Wrenches
>
Head
Thickness (in) (D)
17/64
21/64
3/8
25/64
29/64
33/64
33/64
37/64
5/8
Outside Head
Width (in) (C1)
15/32
21/32
3/4
27/32
11/64
1-1/8
1-3/16
1-25/64
1-1/2
Head
Thickness (in) (D1)
15/64
19/64
23/64
23/64
27/64
33/64
31/64
35/64
19/32
AS954E S3.8.1
Overall
Weight
Length (in) (lbs)
6-15/16
0.20
8-1/16
0.23
8-3/8
0.24
9-7/16
0.41
11-1/8
0.53
13-1/8
0.65
13-1/8
0.65
15-1/8
0.90
17-1/2
1.54
ASME B107.100
box end
FaCom® Full Polish metriC Double box WrenChes - 12 Point
>
>
>
>
Slim rings and short shank for clearance.
12 point box ends allow for fine indexing,
Straight pattern.
Product #
FM-59.6X7
FM-59.8X9
FM-59.10X11
FM-59.12X13
FM-59.14X15
FM-59.16X17
FM-59.18X19
FM-59.21X23
FM-59.22X24
FM-59.26X28
FM-59.27X29
FM-59.30X32
Size (mm)
6 X 7
8 X 9
10 x 11
12 x 13
14 x 15
16 x 17
18 x 19
21 x 23
22 X 24
26 X 28
27 X 29
30 X 32
Outside Head
Width (in) (C)
25/64
31/64
39/64
47/64
53/64
59/64
1-1/32
1-15/64
1-15/64
1-7/16
1-17/32
1-43/64
Head
Thickness (in) (D)
3/16
13/64
1/4
9/32
9/32
21/64
23/64
29/64
29/64
15/32
1/2
1/2
Made in USA
Outside Head
Width (in) (C1)
7/16
35/64
21/32
13/16
57/64
31/32
1-5/64
1-21/64
1-21/64
1-19/32
1-45/64
1-49/64
Head
Overall
3/16
3-15/16
0.05
13/64
4-17/32
0.07
1/4
5-3/64
0.11
9/32
5-5/8
0.16
9/32
6-3/16
0.21
21/64
6-39/64
0.26
23/64
7-7/16
0.32
29/64
8-35/64
0.52
29/64
8-35/64
0.51
15/32
10-7/16
0.95
1/2
11-7/32
0.92
1/2
11-7/32
1.14
607
Full Polish Double box WrenChes - sPline
Wrenches
>
>
>
>
>
Proto® Spline Tools are designed to service high
tensile strength fasteners used widely on military
and commercial aircraft and in heavy machinery
applications where vibration is prevalent. They are
also used in automotive and industrial areas where
high performance torque needs to be achieved.
Spline fasteners help tighten high
strength bolts to high torque loads.
They help lower the force required to turn standard
fasteners by allowing the torque load to be moved away
from the corners, helping prevent fastener rounding.
They also turn fasteners with damaged corners.
Spline helps reduce foreign object debris
(FOD) by having a precise fit between
the fastening tool and its fastener.
resistance and an easy to clean surface.
Box End
Product #
J1118SPL
J1122SPL
J1126SPL
J1130SPL
J1135SPL
J1142SPL
J1144SPL
Size (in)
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
9/16 x 5/8
11/16 x 3/4
13/16 x 15/16
7/8 x 1
Outside Head
Head
Outside Head
Head
Overall Length
(in)
31/64
15/64
25/64
15/64
7-1/4
43/64
23/64
37/64
21/64
8-1/4
53/64
25/64
3/4
23/64
9-3/16
59/64
29/64
53/64
25/64
9-3/4
1-5/64
33/64
63/64
1/2
11
1-23/64
37/64
1-5/32
17/32
12-3/4
1-29/64
19/32
1-1/4
35/64
13-1/4
grabbing rounDeD heaDs
Weight
(lbs)
0.12
0.18
0.34
0.4
0.75
1.03
1.08
Spline tips grip aways
from the corners.
Spline End Wrenches are the better choice for working out a
fastener with a rounded head. The tips of the spline always
grab the fastener along the flat sides of the head, away from
the damaged corners. You have a much better chance of
getting a firmer grip that won’t slip when you apply force.
satin Double box WrenChes - 12 Point
>
>
>
Outside Head
Product #
Size (in)
Width (in) (C)
J1151
1-1/16 x 1-1/4
1-3/4
J1155
1-1/4 x 1-5/16
1-7/8
J1160
1-1/4 x 1-3/8
1-15/16
J1162
1-7/16 x 1-1/2
2-1/8
J1164
1-5/8 x 1-11/16
2-3/8
Head
Thickness (in) (D)
45/64
47/64
3/4
13/16
29/32
Outside Head
Width (in) (C1)
1-1/2
1-3/4
1-3/4
2-3/64
2-13/32
Head
Overall
5/8
18-1/4
1.82
3/4
19-1/4
1.97
3/4
20-1/4
2.22
51/64
22-1/4
2.98
29/32
24-1/2
3.74
AS954E S3.8.1
608
ASME B107.100
blaCk oxiDe Double box WrenChes - 12 Point
>
>
Product #
J1120LB
J1125LB
J1126LB
J1130LB
J1135B
J1139B
J1140B
J1145B
J1150B
J1151B
Size (in)
5/16 x 3/8
7/16 x 1/2
1/2 x 9/16
9/16 x 5/8
11/16 x 3/4
3/4 x 7/8
13/16 x 7/8
15/16 x 1
1-1/16 x 1-1/8
1-1/16 x 1-1/4
Outside Head
Width (in) (C)
37/64
3/4
57/64
15/16
1-7/64
1-1/4
1-19/64
1-29/64
1-39/64
1-3/4
Head
Thickness (in) (D)
17/64
21/64
25/64
25/64
29/64
33/64
33/64
37/64
5/8
39/64
Outside Head
Head
Overall
15/32
15/64
6-15/16
0.15
21/32
19/64
8-1/16
0.18
13/16
3/8
8-7/16
0.24
27/32
23/64
9-7/16
0.28
1-1/64
27/64
11-1/4
0.48
1-1/8
33/64
13-1/8
0.65
1-3/16
31/64
13-7/8
0.69
1-3/8
35/64
15-1/2
0.99
1-1/2
19/32
17-1/4
1.50
1-1/2
45/64
18-1/4
1.82
Wrenches
>
AS954E S3.8.1
Full Polish oFFset box WrenChes - 12 Point
>
>
>
Product #
J1012-500
J1016-500
J1018-500
J1022-500
J1026-500
J1030-500
J1034-500
Size (in)
3/8 x 7/16
1/2 x 9/16
9/16 x 5/8
11/16 x 3/4
13/16 x 7/8
15/16 x 1
1-1/16 x 1-1/8
Outside Head
Head
Width (in) (C) Thickness (in) (D)
21/32
5/16
53/64
23/64
59/64
13/32
1-3/32
15/32
1-1/4
33/64
1-13/32
37/64
1-9/16
41/64
box end
>
Outside Head
Head
Overall
37/64
19/64
7-3/4
0.11
3/4
11/32
8-7/8
0.20
53/64
23/64
9-1/2
0.27
1-1/64
29/64
11-3/16
0.40
1-11/64
31/64
12-11/16
0.67
1-21/64
35/64
14-3/8
0.88
1-31/64
41/64
16-3/4
1.15
AS954E S3.8.1
Made in USA
ASME B107.100
609
Full Polish metriC oFFset box WrenChes - 12 Point
Wrenches
>
>
>
>
Product #
J1050M
J1051M
J1053M
J1057M
J1058M
J1061M
J1064M
J1065M
J1068M
J1069M
J1072M
J1073M
J1077M
J1079M
Size (mm)
6 x 7
8 x 9
10 x 11
12 x 13
12 x 14
14 x 15
16 x 18
17 x 19
19 x 21
19 x 22
21 x 24
22 x 24
27 x 30
30 x 32
29/64
35/64
21/32
3/4
13/16
7/8
1-1/32
1-5/64
1-3/16
1-17/64
1-11/32
1-11/32
1-43/64
1-25/32
13/32
31/64
39/64
45/64
45/64
13/16
29/32
63/64
1-5/64
1-5/64
1-3/16
1-17/64
1-33/64
1-43/64
Overall Length (in)
5-49/64
6-49/64
7-31/32
8-55/64
9-1/16
9-45/64
10-11/16
11-23/64
12-15/32
12-15/32
13-25/64
13-45/64
15-59/64
17-13/64
Box End
AS954E S3.8.1
Weight (lbs)
0.09
0.11
0.19
0.28
0.42
0.39
0.45
0.59
0.70
0.70
0.99
0.94
1.42
1.76
ASME B107.100
satin DeeP oFFset box WrenChes - 12 Point
>
>
>
>
>
60° deep offset helps improve access
to deeply recessed fasteners.
Offset handle helps keep knuckles clear
of obstruction to help save time.
Product #
J8180
J8181
J8182
J8183A
J8184
J8185
Size (in)
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
11/16 x 13/16
3/4 x 7/8
15/16 x 1
Outside Head Width
Head
Outside Head
Head
Overall Weight
(in) (C)
Thickness (in) (D) Width (in) (C1) Thickness (in) (D1) Length (in) (lbs)
39/64
5/16
45/64
11/32
7-3/4
0.19
51/64
23/64
57/64
23/64
9
0.32
31/32
13/32
1-1/32
7/16
10-1/4
0.44
1-3/16
1/2
1-1/4
1/2
11-1/2
0.54
1-1/8
1/2
1-1/4
17/32
12-3/4
0.74
1-11/32
5/8
1-13/32
5/8
14
1.10
AS954E S3.8.1
C
ASME B107.100
C1
L
610
short satin Double box WrenChes - 12 Point
>
>
Product #
J1120
J1122
J1125
J1126
J1131
Size (in)
5/16 x 3/8
3/8 x 7/16
7/16 x 1/2
1/2 x 9/16
5/8 x 3/4
Outside Head
Width (in) (C)
33/64
37/64
43/64
43/64
1-27/32
Head
Thickness (in) (D)
17/64
19/64
21/64
11/32
13/32
Outside Head
Width (in) (C1)
37/64
43/64
49/64
55/64
1-3/32
Head
Overall
19/64
4-1/4
0.07
21/64
4-5/8
0.09
11/32
5
0.10
23/64
5-3/8
0.12
15/32
6-1/8
0.25
AS954E S3.8.1
Wrenches
>
ASME B107.100
satin obstruCtion box WrenChes - 12 Point
>
>
>
>
>
Satin chrome finish provides corrosion
resistance and a slip-resistant grip.
Made of forged steel then heat-treated.
Curved half-moon shape helps improve access
to hidden, difficult to reach locations.
Size (in)
7/16 x 1/2
9/16 x 5/8
5/8 x 3/4
5/8
25/32
27/32
5/8
25/32
27/32
Overall Length (in)
5-3/4
6-5/8
7-1/4
AS954E S3.8.1
Weight (lbs)
0.17
0.23
0.39
box end
Product #
J1725
J1730
J1731
ASME B107.100
FaCom® satin metriC obstruCtion box WrenChes - 12 Point
>
>
>
>
Half-moon shape helps improve access to
hidden, difficult to reach locations.
Product #
FM-57.10X12
FM-57.11X13
FM-57.13X15
FM-57.14X16
FM-57.14X17
FM-57.15X17
FM-57.16X18
FM-57.19X22
Size (mm)
10 x 12
11 x 13
13 x 15
14 x 16
14 x 17
15 x 17
16 x 18
19 x 22
Outside Head Width
(in) (C)
43/64
43/64
25/32
57/64
57/64
57/64
15/16
1-1/8
Head
Thickness (in) (D)
5/16
5/16
21/64
23/64
23/64
23/64
3/8
25/64
Made in USA
Outside Head
Head
Overall
Width (in) (C1) Thickness (in) (D1) Length (in)
49/64
5/16
5-5/8
49/64
5/16
6-1/2
29/32
23/64
7-15/32
31/32
3/8
7-7/16
31/32
3/8
7-17/32
31/32
3/8
8-3/4
1-1/16
25/64
8-3/4
1-9/32
7/16
9-31/32
Weight
(lbs)
0.15
0.24
0.35
0.35
0.34
0.46
0.45
0.62
611
Wrenches
FaCom® insulateD box WrenChes - 12 Point
>
>
>
>
Insulated to 1000V or 1500 DC.
2 color warning handle insulation - color changes from
orange to yellow if insulation integrity compromised.
Product #
Size (mm)
FM-55.8AVSE
8
FM-55.9AVSE
9
FM-55.10AVSE
10
FM-55.11AVSE
11
FM-55.12AVSE
12
FM-55.13AVSE
13
FM-55.14AVSE
14
FM-55.15AVSE
15
FM-55.16AVSE
16
FM-55.17AVSE
17
FM-55.18AVSE
18
FM-55.19AVSE
19
FM-55.21AVSE
21
Outside Head Width
(in) (C)
5/8
43/64
3/4
25/32
53/64
29/32
63/64
1-1/32
1-1/16
1-3/16
1-3/16
1-17/64
1-3/8
Head Thickness
(in) (D)
5/16
23/64
23/64
25/64
7/16
15/32
15/32
15/32
33/64
35/64
35/64
35/64
5/8
Offset Height
(in) (E)
5/8
43/64
43/64
3/4
25/32
25/32
53/64
53/64
1-1/32
1-1/16
1-1/16
1-1/16
1-7/32
Overall Length
(in)
6-1/32
6-1/2
6-5/16
6-11/16
6-7/8
7-3/32
7-15/32
7-11/16
8-1/16
7-7/8
8-7/8
9-1/4
10-1/32
Weight
(lbs)
0.12
0.13
0.12
0.15
0.23
0.22
0.27
0.29
0.34
0.34
0.46
0.49
0.75
10 PieCe oPen enD WrenCh set
open-end
Product #: J3000H
Contents
J3018
J3020
J3025
J3026
J3030
J3031
J3035
J3040
J3045
J3050
J25TR05C
Size (in)
1/4 x 5/16
5/16 x 3/8
7/16 x 1/2
1/2 x 9/16
9/16 x 5/8
5/8 x 3/4
11/16 x 3/4
13/16 x 7/8
15/16 x 1
1-1/16 x 1-1/8
Tool Roll
Overall Length (in)
4-31/64
5-1/8
6-3/8
7
7-5/8
8-9/16
8-7/8
10-1/8
11-1/2
12-5/8
>
>
>
>
>
15° angle heads.
Special heat-treated alloy steel permits slim
shanks for strength and durability.
Standard open end configuration.
Weight (lbs): 4.82
ASME B107.100
10 PieCe blaCk oxiDe oPen enD WrenCh set
>
Product #: J3000HB
Contents
J3020B
J3025B
J3030B
J3035B
J3040B
J3045B
J3050B
J3055B
J3060B
J3070B
J25TR05C
612
Size (in)
5/16 x 3/8
7/16 x 1/2
9/16 x 5/8
11/16 x 3/4
13/16 x 7/8
15/16 x 1
1-1/16 x 1-1/8
1-1/4 x 1-5/16
1-3/8 x 1-7/16
1-1/2 x 1-5/8
Tool Roll
Overall Length (in)
5-1/4
6-7/16
7-47/64
8-63/64
10-15/64
11-31/64
12-3/8
14-5/8
15-7/8
17-1/16
>
>
>
>
15° angle heads.
Standard open-end configuration.
Weight (lbs): 12.62
10 PieCe metriC oPen enD WrenCh set
Product #: J30000A
Size (mm)
6 x 7
8 x 9
10 x 11
12 x 13
14 x 15
16 x 17
18 x 19
20 x 22
21 x 23
24 x 26
Tool Roll
Overall Length (in)
4-1/2
5-1/8
5-3/4
6-3/8
7-19/32
8-15/64
8-55/64
9-31/64
10-1/8
11-3/8
>
>
15° angle heads.
Weight (lbs): 3.93
Wrenches
Contents
J30607
J30809
J31011
J31213
J31415
J31617
J31819
J32022
J32123
J32426
J25TR28C
>
>
>
ASME B107.100
Product #: J30000R
>
>
>
Contents
J30809
J31011
J31213
J31415
J31617
J31819
J25TR25C
Size (mm)
8 x 9
10 x 11
12 x 13
14 x 15
16 x 17
18 x 19
Tool Roll
Overall Length (in)
5-1/8
5-3/4
6-3/8
7-19/32
8-15/64
8-55/64
open-end
>
>
15° angle heads.
Weight (lbs): 1.63
ASME B107.100
5 PieCe oPen enD WrenCh set
Product #: J3000N
>
>
>
>
>
Contents
J3021
J3026
J3030
J3035
J3040
J25TR06C
Satin finish.
15° angle heads.
Special heat-treated alloy steel permits
slim shanks for strength and durability.
Weight (lbs): 1.66
Size (in)
3/8 x 7/16
1/2 x 9/16
9/16 x 5/8
11/16 x 3/4
13/16 x 7/8
Tool Roll
Overall Length (in)
5-3/4
7
7-5/8
8-7/8
10-1/8
ASME B107.100
Made in USA
613
Wrenches
Product #: J30000P-M
>
>
>
>
15° angled heads.
Weight (lbs): 1.92
Contents
J31011
J31213
J31415
J31819
J32123
J25TR06C
Size (mm)
10 x 11
12 x 13
14 x 15
18 x 19
21 x 23
Tool Roll
Overall Length (in)
5-3/4
6-3/8
7-19/32
8-55/64
10-1/8
ASME B107.100
satin oPen enD WrenChes
open-end
>
>
>
>
15° angle heads.
Product #
J3016
J3018
J3020
J3021
J3025
J3026
J3030
J3031
J3034
J3035
J3037
J3039
J3040
J3045
J3050
J3051
J3055
J3060
J3070
J3075
J3080
Throat Outside Head
Head
Throat Outside Head Head
Depth (in) Width (in) Thickness (in) Depth (in) Width (in) Thickness Overall
Size (in)
(B)
(C)
(D)
(B1)
(C1)
(in) (D1) Length (in)
3/16 x 1/4
17/64
1/2
5/32
1/4
7/16
5/32
3-7/8
1/4 x 5/16
3/8
21/32
3/16
19/64
35/64
5/32
4-31/64
5/16 x 3/8
7/16
25/32
13/64
3/8
41/64
13/64
5-1/8
3/8 x 7/16
23/64
29/32
7/22
7/16
25/32
7/32
5-3/4
7/16 x 1/2
19/32
1-1/32
1/4
29/32
29/32
1/4
6-3/8
1/2 x 9/16
43/64
1-3/16
17/64
19/32
1-1/32
17/64
7
9/16 x 5/8
3/4
1-17/64
9/32
11/16
1-5/32
9/32
7-5/8
5/8 x 3/4
29/32
1-37/64
5/16
47/64
1-5/32
5/16
8-9/16
5/8 x 11/16
53/64
1-13/32"
5/16
3/4
1-9/32
5/16
8-1/4
11/16 x 3/4
29/32
1-37/64
21/64
53/64
1-13/32
21/64
8-7/8
11/16 x 25/32
57/64
1-37/64
21/64
53/64
1-13/32
21/64
8-7/8
3/4 x 7/8
1-1/16
1-25/32
11/32
29/32
1-37/64
11/32
9-1/2
13/16 x 7/8
1-3/64
1-25/32
23/64
63/64
1-21/32
23/64
10-1/8
15/16 x 1
1-13/64
2-1/64
13/32
1-1/8
1-29/32
13/32
11-1/2
1-1/16 x 1-1/8
1-23/64 2-17/64
29/64
1-9/32
2-5/32
29/64
12-5/8
1-1/16 x 1-1/4
1-31/64 2-33/64
15/32
1-9/32
2-5/32
15/32
13-9/16
1-1/4 x 1-5/16
1-9/16
2-21/32
33/64
1-31/64 2-33/64
33/64
14-1/2
1-3/8 x 1-7/16
1-23/32 2-57/64
35/64
1-41/64 2-23/32
35/64
15-3/4
1-1/2 x 1-5/8
1-15/16 3-17/64
39/64
1-25/32 2-61/64
39/64
17
1-11/16 x 1-13/16 2-3/16
3-41/64
45/64
2
3-25/64
45/64
18-1/2
1-7/8 x 2
2-3/8
4-1/32
49/64
2-11/64 3-41/64
45/64
20
Weight
(lbs)
0.04
0.07
0.09
0.12
0.19
0.23
0.28
0.39
0.35
0.47
0.46
0.6
0.62
0.92
1.24
1.47
1.87
2.59
3.31
4.71
6.38
ASME B107.100
614
satin metriC oPen enD WrenChes
>
>
Product #
J30607
J30809
J31011
J31213
J31415
J31617
J31819
J32022
J32123
J32426
Throat Outside Head
Head
Depth (in) Width (in) Thickness (in)
Size (mm)
(B)
(C)
(D)
6 x 7
3/8
41/64
11/64
8 x 9
7/16
25/32
3/16
10 x 11
17/32
29/32
7/32
12 x 13
19/32
1-1/32
1/4
14 x 15
3/4
1-9/32
9/32
16 x 17
57/64
1-13/32
19/64
18 x 19
29/32
1-37/64
21/64
20 x 22
1-3/64
1-13/16
11/32
21 x 23
1-3/64
1-25/32
23/64
24 x 26
1-13/64
2-1/64
13/32
Throat Outside Head
Head
Overall
Weight
(B1)
(C1)
(D1)
Length (in) (lbs)
19/64
1/2
11/64
4-1/2
0.06
3/8
21/32
3/16
5-1/8
0.09
29/64
25/32
7/32
5-3/4
0.13
17/32
29/32
1/4
6-3/8
0.17
11/16
1-9/64
9/32
7-19/32
0.3
3/4
1-9/32
19/64
8-15/64
0.33
53/64
1-13/32
21/64
8-55/64
0.48
29/32
1-37/64
11/32
9-31/64
0.58
63/64
1-21/32
23/64
10-1/8
0.61
1-1/8
1-29/32
13/32
11-3/8
0.88
Wrenches
>
>
15° angle heads.
ASME B107.100
B1
B
C1
C
15
L
D1
blaCk oxiDe oPen enD WrenChes
>
>
>
>
open-end
D
15° angle heads.
Special heat-treated alloy steel permits
slim shanks for strength and durability.
Product #
J3020B
J3021B
J3025B
J3026B
J3030B
J3031B
J3035B
J3039B
J3040B
J3045B
J3050B
J3051B
J3055B
J3060B
J3070B
Size (in)
5/16 x 3/8
3/8 x 7/16
7/16 x 1/2
1/2 x 9/16
9/16 x 5/8
5/8 x 3/4
11/16 x 3/4
3/4 x 7/8
13/16 x 7/8
15/16 x 1
1-1/16 x 1-1/8
1-1/16 x 1- 1/4
1-1/4 x 1-5/16
1-3/8 x 1-7/16
1-1/2 x 1-5/8
Throat Outside Head
Head
Throat Outside Head
Head
Depth (in) Width (in) Thickness Depth (in) Width (in) Thickness (in)
Overall
Weight
(B)
(C)
(in) (D)
(B1)
(C1)
(D1)
Length (in) (lbs)
7/16
25/32
3/16
7/32
21/32
3/16
5-1/4
0.08
33/64
29/32
7/32
29/64
25/32
7/32
5-7/8
0.12
39/64
1-1/32
15/64
35/64
29/32
15/64
6-7/16
0.16
11/16
1-3/16
1/4
19/32
1-1/32
1/4
7-7/64
0.22
3/4
1-9/32
17/64
1-1/16
1-5/32
17/64
7-47/64
0.28
29/32
1-37/64
19/64
3/4
1-5/32
19/64
8-43/64
0.38
29/32
1-37/64
5/16
13/16
1-13/32
5/16
8-63/64
0.44
1-3/64
1-17/64
21/64
29/32
1-37/64
21/64
9-39/64
0.50
1-3/64
1-25/32
23/64
61/64
1-31/32
23/64
10-15/64 0.61
1-13/64
2-1/64
31/64
1-1/8
1-29/32
31/64
11-31/64 0.88
1-23/64 2-17/64
7/16
1-15/64
2-9/64
7/16
12-3/8
1.20
1-1/2
2-33/64
29/64
1-9/32
2-9/64
29/64
13-43/64 1.47
1-37/64 2-41/64
1/2
1-1/2
2-33/64
1/2
14-5/8
1.87
1-47/64 2-57/64
17/32
1-21/32 2-23/32
17/32
15-7/8
2.48
1-61/64
3-1/64
39/64
1-51/64 2-61/64
39/64
17-1/16
3.07
Made in USA
615
extra thin satin oPen enD WrenChes
Wrenches
>
>
>
>
Ultra-thin profile and long handle produce
improved access to hard-to-reach fasteners.
Use when high leverage or distance from
a hot assembly is required.
Opening is designed to cover tappets, screws and lock
nuts without excessive overhang which improves access.
Product #
J3425
J3426
J3430
J3435
J3440
Throat Outside Head
Head
Size (in)
(B)
(C)
(D)
7/16 x 1/2
19/32
1-3/32
11/64
1/2 x 9/16
43/64
1-13/64
11/64
9/16 x 5/8
47/64
1-21/64
11/64
11/16 x 3/4 57/64
1-7/16
13/64
13/16 x 7/8 1-1/32
1-49/64
13/64
Throat Outside Head
Head
Overall
Weight
(B1)
(C1)
(D1)
Length (in) (lbs)
33/64
1-1/64
11/64
10
0.16
19/32
1-9/64
11/64
10
0.16
43/64
1-1/4
11/64
10
0.21
13/16
1-11/32
13/64
10
0.26
31/32
1-11/16
13/64
10
0.33
open-end
FaCom® 5 PieCe short oPen enD WrenCh set
Product #: FF-22.JU5T
>
>
Short shank and slim heads for
access in confined spaces.
Weight (lbs): 0.22
Contents
FF-22.1/2X9/16
FF-22.11/32X7/
FF-22.3/16X1/4
FF-22.5/16X3/8
FF-22.7/32X9/3
Size (in)
1/2 x 9/16
11/32 x 7/16
3/16 x 1/4
5/16 x 3/8
7/32 x 9/32
Overall Length (in)
4-11/32
3-15/16
3-11/32
3-17/32
3-11/32
FaCom® 6 PieCe metriC short
oPen enD WrenCh set
>
>
Short shank and slim heads for
access in confined spaces.
Weight (lbs): 0.23
Contents
FM-22.3.2X5.5
FM-22.4X5
FM-22.6X7
FM-22.8X9
FM-22.10X11
FM-22.12X13
616
Size (mm)
3.2 x 5.5
4 x 5
6 x 7
8 x 9
10 x 11
12 x 13
Overall Length (in)
2-9/32
2-9/32
3-5/16
3-1/2
3-7/8
4-5/16
FaCom® short satin oPen enD WrenChes
>
Product #
FF-22.3/16X1/4
FF-22.7/32X9/3
FF-22.5/16X3/8
FF-22.11/32X7/
FF-22.1/2X9/16
Size (in)
3/16 x 1/4
7/32 x 9/32
5/16 x 3/8
11/32 x 7/16
1/2 x 9/16
Outside Head
Width (in) (C)
35/64
35/64
45/64
53/64
1-1/32
Head
Outside Head
Head
Overall
Thickness (in) (D) Width (in) (C1) Thickness (in) (D1) Length (in)
1/8
5/8
1/8
3-11/32
1/8
5/8
1/8
3-11/32
1/8
25/32
1/8
3-17/32
1/8
29/32
1/8
3-15/16
3/32
1-7/64
3/32
4-11/32
Weight
(lbs)
0.03
0.03
0.03
0.05
0.08
Wrenches
>
>
Short shank and slim heads for access in confined spaces.
FaCom® short satin metriC oPen enD WrenChes
>
>
>
Short shank and slim heads for access in confined spaces.
Outside Head Width
Head
Outside Head Width
Head
Overall
(in) (C)
Thickness (in) (D)
(in) (C1)
25/64
3/32
33/64
3/32
2-9/32
0.01
25/64
3/32
33/64
3/32
2-9/32
0.02
35/64
3/32
5/8
3/32
3-5/16
0.03
45/64
1/8
25/32
1/8
3-1/2
0.04
53/64
1/8
29/32
1/8
3-7/8
0.05
1-1/32
1/8
1-7/64
1/8
4-5/16
0.08
open-end
Product #
Size (mm)
FM-22.3.2X5.5 3.2 x 5.5
FM-22.4X5
4 x 5
FM-22.6X7
6 x 7
FM-22.8X9
8 x 9
FM-22.10X11
10 x 11
FM-22.12X13
12 x 13
14 PieCe angle oPen enD WrenCh set
>
Product #: J3100B
Contents
J3112
J3114
J3116
J3118
J3120
J3122
J3124
J3126
J3128
J3130
J3132
J3134
J3136
J3140
J25TR08C
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
Tool Roll
Overall Length (in)
4-3/4
5
5-1/4
5-5/8
6
6-1/2
7
7-1/2
8
8-3/4
9-1/2
10-1/4
11
12-1/4
>
>
>
Double nickel strike for rust resistance and prolonged life.
15° and 60° angle heads.
Weight (lbs): 5.58
ASME B107.100
Made in USA
617
11 PieCe metriC angle oPen enD WrenCh set
>
>
Wrenches
Product #: J3100M
Contents
J3109M
J3110M
J3111M
J3112M
J3113M
J3114M
J3115M
J3116M
J3117M
J3118M
J3119M
J25TR13C
Size (mm)
9
10
11
12
13
14
15
16
17
18
19
Tool Roll
Overall Length (in)
4-3/4
4-7/8
5
5-1/4
5-1/2
5-5/8
5-15/16
6-1/8
6-1/2
6-3/4
7
>
Full polish finish provides corrosion and easy to clean surfaces.
15° and 60° angle heads allow wrench to be used in four
different turning angles for greater access in tight work areas.
Weight (lbs): 1.79
ASME B107.100
7 PieCe angle oPen enD WrenCh set
Product #: J3100A
open-end
>
>
>
Contents
J3112
J3114
J3116
J3118
J3120
J3122
J3124
J25TR07C
15° and 60° angle heads allow wrench to
be used in four different turning angles for
greater access in tight work areas.
Weight (lbs): 1.02
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Tool Roll
Overall Length (in)
4-3/4
5
5-1/4
5-5/8
6
6-1/2
7
ASME B107.100
1
1
1
618
Full Polish angle oPen enD WrenChes
>
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-5/8
1-3/4
1-13/16
1-7/8
2
Overall
4-3/4
0.06
5
0.08
5-1/4
0.10
5-5/8
0.14
6
0.17
6-1/2
0.21
7
0.26
7-1/2
0.50
8
0.61
8-3/4
0.71
9-1/2
0.88
10-1/4
1.04
11
1.20
12-1/4
1.47
13-1/8
1.87
13-3/4
2.17
14
2.48
14-1/2
2.77
15
3.07
17
3.81
18-3/8
4.56
19-3/4
5.24
21-1/4
5.92
open-end
Product #
J3112
J3114
J3116
J3118
J3120
J3122
J3124
J3126
J3128
J3130
J3132
J3134
J3136
J3140
J3142
J3144
J3146
J3148
J3152
J3156
J3158
J3160
J3164
Throat Outside Head
Head
Throat Outside Head
Head
Depth (in) Width (in) Thickness (in) Depth (in) Width (in) Thickness
(B)
(C)
(D)
(B1)
(C1)
(in) (D1)
13/32
3/4
13/64
13/32
3/4
13/64
15/32
7/8
13/64
15/32
7/8
13/64
35/64
1
15/64
35/64
1
15/64
39/64
1-7/64
15/64
39/64
1-7/64
15/64
21/32
1-7/32
17/64
21/32
1-7/32
17/64
23/32
1-21/64
17/64
23/32
1-21/64
17/64
25/32
1-7/16
9/32
25/32
1-7/16
9/32
27/32
1-9/16
19/64
27/32
1-9/16
19/64
57/64
1-21/32
5/16
57/64
1-21/32
5/16
31/32
1-25/32
21/64
31/32
1-25/32
21/64
1-1/32
1-59/64
11/32
1-1/32
1-59/64
11/32
1-1/16
2-1/64
23/64
1-1/16
2-1/64
23/64
1-1/8
2-1/8
3/8
1-1/8
2-1/8
3/8
1-1/4
2-11/32
13/32
1-1/4
2-11/32
13/32
1-5/16
2-29/64
27/64
1-5/16
2-29/64
27/64
1-13/32
2-37/64
7/16
1-13/32
2-37/64
7/16
1-13/32
2-5/8
29/64
1-13/32
2-5/8
29/64
1-31/64
2-3/4
15/32
1-31/64
2-3/4
15/32
1-43/64
3-1/64
1/2
1-43/64
3-1/64
1/2
1-31/32
3-31/64
33/64
1-31/32
3-31/64
33/64
1-63/64
3-31/64
33/64
1-63/64
3-31/64
33/64
2-7/32
3-29/32
21/32
2-7/32
3-29/32
21/32
2-9/32
3-29/32
21/32
29/32
3-29/32
21/32
Wrenches
>
>
Double nickel strike for rust resistance and prolonged life.
15° and 60° angle heads combined with the
same size opening on both ends allow wrench
to be used in four different turning angles for
ASME B107.100
Full Polish metriC angle oPen enD WrenChes
>
>
Product #
J3109M
J3110M
J3111M
J3112M
J3113M
J3114M
J3115M
J3116M
J3117M
J3118M
J3119M
Throat Outside Head
Head
Size (mm)
(B)
(C)
(D)
9
13/32
49/64
13/64
10
7/16
13/16
13/64
11
15/32
7/8
7/32
12
1/2
59/64
15/64
13
17/32
63/64
15/64
14
39/64
1-7/64
1/4
15
5/8
1-5/32
17/64
16
21/32
1-7/32
17/64
17
47/64
1-11/32
9/32
18
23/32
1-11/32
9/32
19
25/32
1-7/16
9/32
Throat Outside Head
Head
Overall
Weight
(B1)
(C1)
(D1)
Length (in) (lbs)
13/32
49/64
13/64
4-3/4
0.06
7/16
13/16
13/64
4-7/8
0.07
15/32
7/8
7/32
5
0.08
1/2
59/64
15/64
5-1/4
0.10
17/32
63/64
15/64
5-1/2
0.13
39/64
1-7/64
1/4
5-5/8
0.14
5/8
1-5/32
17/64
5-15/16
0.16
21/32
1-7/32
17/64
6-1/8
0.19
47/64
1-11/32
9/32
6-1/2
0.21
23/32
1-11/32
9/32
6-3/4
0.24
25/32
1-7/16
9/32
7
0.26
ASME B107.100
Made in USA
619
FaCom® 16 PieCe metriC short angle oPen enD WrenCh set
Wrenches
Product #: FM-34.JL16T
Contents
FM-34.3.2
FM-34.4
FM-34.5
FM-34.5.5
FM-34.6
FM-34.7
FM-34.8
FM-34.9
FM-34.10
FM-34.11
FM-34.12
FM-34.13
FM-34.14
FM-34.15
FM-34.16
FM-34.17
Size (mm)
3.2
4
5
5.5
6
7
8
9
10
11
12
13
14
15
16
17
Overall Length (in)
2-3/4
2-3/4
2-61/64
2-61/64
3-5/32
3-5/32
3-35/64
3-35/64
3-15/16
3-15/16
3-15/16
4-23/32
4-23/32
5-33/64
5-33/64
5-33/64
>
>
>
>
>
15° and 75° angled heads for fasteners
out of standard-tool reach.
Short shanks and slim heads.
Weight (lbs): 1.12
open-end
1
1
1
9 PieCe short angle oPen enD WrenCh set
Product #: J3300A
Contents
J3314
J3315
J3316
J3318
J3320
J3322
J3324
J3328
J3332
J25TR26C
620
Size (in)
7/32
15/64
1/4
9/32
5/16
11/32
3/8
7/16
1/2
Tool Roll
Overall Length (in)
3
3
3
3-1/2
3-1/2
3-3/4
3-3/4
4-7/16
4-7/16
>
>
>
>
>
Satin finish.
15° and 75° angle heads.
Weight (lbs): 0.46
short satin angle oPen enD WrenChes
>
>
>
Product #
J3314
J3315
J3316
J3318
J3320
J3322
J3324
J3328
J3332
J3336
J3340
Size (in)
7/32
15/64
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
5/8
Throat Outside Head
Head
(B)
(C)
(D)
11/64
1/2
7/64
11/64
1/2
7/64
11/64
1/2
7/64
3/16
19/32
5/32
3/16
19/32
5/32
1/4
3/4
5/32
1/4
3/4
5/32
11/32
1
11/64
11/32
1
11/64
13/32
1-5/32
3/16
13/32
1-5/32
3/16
Throat Outside Head
Head
Overall
Weight
(B1)
(C1)
(D1)
Length (in) (lbs)
11/64
1/2
7/64
3
0.03
11/64
1/2
7/64
3
0.03
11/64
1/2
7/64
3
0.03
3/16
19/32
5/32
3-1/2
0.04
3/16
19/32
5/32
3-1/2
0.04
1/4
3/4
5/32
3-3/4
0.05
1/4
3/4
5/32
3-3/4
0.05
11/32
1
11/64
4-7/16
0.08
11/32
1
11/64
4-7/16
0.08
13/32
1-5/32
3/16
5-3/4
0.10
13/32
1-5/32
3/16
5-3/4
0.10
Wrenches
>
greater access in tight work spaces.
ASME B107.100
open-end
FaCom® short satin metriC angle oPen enD WrenChes
>
>
>
>
and slip-resistant grip.
15° and 75° angled heads for fasteners
out of standard tool reach.
Short shanks and slim heads.
Product #
FM-34.3.2
FM-34.4
FM-34.5
FM-34.5.5
FM-34.6
FM-34.7
FM-34.8
FM-34.9
FM-34.10
FM-34.11
FM-34.12
FM-34.13
FM-34.14
FM-34.15
FM-34.16
FM-34.17
Size (mm)
3.2
4
5
5.5
6
7
8
9
10
11
12
13
14
15
16
17
Outside Head
Head
Outside Head
Head
Overall Length
(in)
Weight (lbs)
25/64
3/32
25/64
3/32
2-3/4
0.01
25/64
3/32
25/64
3/32
2-3/4
0.01
33/64
3/32
33/64
3/32
2-61/64
0.02
33/64
7/64
33/64
7/64
2-61/64
0.02
19/32
7/64
19/32
7/64
3-5/32
0.02
19/32
1/8
19/32
1/8
3-5/32
0.02
47/64
1/8
47/64
1/8
3-35/64
0.04
47/64
1/8
47/64
1/8
3-35/64
0.04
55/64
1/8
55/64
1/8
3-15/16
0.05
55/64
1/8
55/64
1/8
3-15/16
0.05
1-1/16
9/64
1-1/16
9/64
3-15/16
0.08
1-1/16
9/64
1-1/16
9/64
4-23/32
0.08
1-1/16
9/64
1-1/16
9/64
4-23/32
0.08
1-19/64
11/64
1-19/64
11/64
5-33/64
0.15
1-19/64
11/64
1-19/64
11/64
5-33/64
0.14
1-19/64
11/64
1-19/64
11/64
5-33/64
0.14
Made in USA
621
6 PieCe FaCom® metriC taPPet WrenCh set
Wrenches
>
>
>
>
>
>
>
Used to tighten collars, lock nut rings and help
seal packing nuts on hydraulic cylinders.
Ultra thin profile for use in close quarters.
Openings designed to cover tappets, screws and lock nuts
with excessive overhang which helps improve access.
For use in low torque applications.
Weight (lbs): 1.63
open-end
Contents
FM-31.8X9
FM-31.10X11
FM-31.12X13
FM-31.14X15
FM-31.16X17
FM-31.18X19
Overall Length (in)
6-57/64
6-57/64
8-17/64
8-17/64
9-27/32
9-27/32
FaCom® satin metriC taPPet oPen enD WrenChes
>
>
>
>
>
>
Used to tighten collars, lock nut rings and help
seal packing nuts on hydraulic cylinders.
Ultra thin profile for use in close quarters.
Openings designed to cover tappets, screws and lock nuts
with excessive overhang which helps improve access.
For use in low torque applications.
Product #
FM-31.6X7
FM-31.8X9
FM-31.10X11
FM-31.12X13
FM-31.14X15
FM-31.16X17
FM-31.18X19
622
Size (mm)
8 x 9
10 x 11
12 x 13
14 x 15
16 x 17
18 x 19
Size (mm)
6 x 7
8 x 9
10 x 11
12 x 13
14 x 15
16 x 17
18 x 19
Outside Head
Width (in) (C)
5/8
25/32
25/32
1-7/64
1-9/64
1-33/64
1-33/64
Head
Thickness (in) (D)
5/8
25/32
13/16
1-3/32
1-5/32
1-17/32
1-17/32
Outside Head
Head
Overall
3/4
5/8
5-53/64
0.06
31/32
25/32
6-57/64
0.08
63/64
13/16
6-57/64
0.08
1-19/64
1-3/32
8-17/64
0.17
1-19/64
1-5/32
8-17/64
0.17
1-11/16
1-17/32
9-27/32
0.31
1-11/16
1-17/32
9-27/32
0.30
13 PieCe ignition set
Product #: J3200C
Size (in)
13/64 x 15/64
15/64 x 13/64
7/32 x 1/4
1/4 x 7/32
9/32 x 5/16
5/16 x 9/32
11/32 x 3/8
3/8 x 11/32
Ignition Feeler Gauge Set
Ignition Pliers
Ignition Point File
Screw Start
Pocket Screwdriver
Tool Roll
Overall Length (in)
3
3
3
3
3-1/2
3-1/2
3-3/4
3-3/4
>
>
15° and 60° angle heads combined with the same
opening size on both ends allows the wrench to
be used in four different turning angles.
Standard open end wrench configuration.
Weight (lbs): 0.67
Wrenches
Contents
J3210
J3211
J3215
J3216
J3220
J3221
J3225
J3226
J000D
J235
J2302
J9853
66-101
J25TR10C
>
>
9 PieCe ignition set
>
>
Product #: J3200D
Size (in)
13/64 x 15/64
15/64 x 13/64
7/32 x 1/4
1/4 x 7/32
9/32 x 5/16
5/16 x 9/32
11/32 x 3/8
3/8 x 11/32
Ignition Pliers
Tool Roll
Overall Length (in)
3
3
3
3
3-1/2
3-1/2
3-3/4
3-3/4
>
>
open-end
Contents
J3210
J3211
J3215
J3216
J3220
J3221
J3225
J3226
J235
J25TR09C
15° and 60° angle heads combined with the same
opening size on both ends allow the wrench to
be used in four different turning angles.
Standard open end wrench configuration.
Weight (lbs): 0.47
ignition WrenChes
>
>
>
15° and 60° angle heads combined with the
same opening size on both ends allow the wrench
to be used in four different turning angles.
Product #
J3210
J3211
J3215
J3216
J3220
J3221
J3225
J3226
Throat Outside Head
Head
Size (in)
(B)
(C)
(D)
13/64 x 15/64
15/64
1/2
7/64
15/64 x 13/64
15/64
1/2
7/64
7/32 x 1/4
15/64
1/2
7/64
1/4 x 7/32
15/64
1/2
7/64
9/32 x 5/16
5/16
19/32
5/32
5/16 x 9/32
5/16
19/32
5/32
11/32 x 3/8
3/8
3/4
5/32
3/8 x 11/32
3/8
3/4
5/32
Made in USA
Throat Outside Head
Head
Overall Weight
(B1)
(C1)
(D1)
Length (in) (lbs)
15/64
1/2
7/64
3
0.02
15/64
1/2
7/64
3
0.02
15/64
1/2
7/64
3
0.02
15/64
1/2
7/64
3
0.02
5/16
19/32
5/32
3-1/2
0.03
5/16
19/32
5/32
3-1/2
0.03
3/8
47/64
5/32
3-3/4
0.05
3/8
3/4
5/32
3-3/4
0.05
623
blaCk oxiDe CheCk nut WrenChes
>
>
>
Use check nut wrenches to tighten jam
nuts, check nuts or lock nuts.
In confined spaces, the 15° head allows for a
full 30° rotation by flipping wrench over.
Ultra thin profile improves access in close quarters.
Product #
JKE14
JKE16
JKE18
JKE19
JKE20
JKE22
JKE24
JKE26
JKE28
JKE30
JKE32
JKE34
JKE36
JKE40
JKE42
JKE48
JKE52
JKE54
Size (in)
7/16
1/2
9/16
19/32
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-5/16
1-1/2
1-5/8
1-11/16
1
1
1-9/32
1-9/32
1-1/2
1-1/2
1-23/32
2
1-25/32
2
2
2-13/32
2-13/32
2-23/32
2-23/32
3-7/32
3-1/2
3-7/16
7/32
7/32
7/32
7/32
7/32
7/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
13/32
13/32
13/32
13/32
1/2
Overall Length (in)
4
4
4-1/2
4-1/2
5-1/8
5-1/8
6-1/8
6-5/8
6-5/8
7-1/2
7-1/2
8-1/2
8-1/2
10
10
11-3/8
13
13
Weight (lbs)
0.05
0.05
0.11
0.11
0.13
0.13
0.19
0.28
0.28
0.36
0.35
0.66
0.65
1.12
1.12
1.50
2.30
2.20
open-end
Wrenches
>
the storY behinD CheCk nut WrenChes
30° oF
turn W
When
FliPPeD
FliPPe
The Check Nut Wrench tightens fasteners (sometimes
called Lock Nuts or Jam Nuts) that lock other
fasteners in place. The thin profile is used to squeeze
into a tight space, or to rotate a fastener without
moving the one next to it.
624
Check Nut Wrenches approach the fastener almost
straight-on. The slight angle makes it easier for both
left- and right-handed work.
satin serviCe WrenChes
>
Size (in)
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/8
2-1/4
2-3/8
2-1/2
2-9/16
Throat
Depth (in) (B)
7/32
7/32
7/32
1/4
1/4
1/4
5/16
5/16
19/64
29/64
7/16
7/16
27/64
7/16
7/16
27/64
45/64
11/16
11/16
11/16
21/32
21/32
39/64
39/64
19/32
9/16
Outside Head Width
(in) (C)
1-11/16
1-11/16
1-11/16
1-7/8
1-7/8
1-7/8
2-1/16
2-1/16
2-1/16
2-1/2
2-1/2
2-1/2
2-1/2
2-5/8
2-5/8
2-5/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
Head
Thickness (in) (D)
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
9/32
9/32
9/32
9/32
9/32
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
Overall Length (in)
6-1/4
6-1/4
6-1/4
6-7/8
6-7/8
6-7/8
7
7
7
7-5/8
7-5/8
7-5/8
7-5/8
7-5/8
7-5/8
7-5/8
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
Weight (lbs)
0.22
0.22
0.22
0.25
0.25
0.25
0.31
0.31
0.45
0.44
0.43
0.42
0.43
0.43
0.42
0.7
0.69
0.69
0.68
0.68
0.66
0.65
0.61
0.61
0.59
0.57
open-end
Product #
J3524
J3526
J3528
J3530
J3532
J3534
J3536
J3538
J3540
J3542
J3544
J3546
J3548
J3550
J3552
J3554
J3556
J3558
J3560
J3562
J3564
J3568
J3572
J3576
J3580
J3582
Wrenches
>
>
>
30° angle head allows access to difficult to reach fasteners.
Thin pattern for use on jam nuts, check nuts or lock nuts.
Short shank allows for use in confined spaces.
the storY behinD serviCe WrenChes
Service, Check Nut and Tappet
wrenches look similar, but they
serve different purposes. Used in
low-torque situations, they tighten
fasteners in automotive or plumbing
applications where access is
frequently tight and travel is part of
the job.
The Service Wrench is provides an
extra-large head on a short, tapered
shank. The 30° angle on the handle
allows for double rotation in tight
spots by just flipping the wrench.
60° oF
turn When
FliPPeD
These wrenches are designed as
a small, but strong set of hand
wrenches ideal for traveling to
various job sites.
Made in USA
625
satin metriC serviCe WrenChes
>
>
>
30° angle head allows access to difficult to reach fasteners.
Thin pattern for use on jam nuts, check nuts or lock nuts.
Short shank allows for use in confined spaces.
Product #
J3519M
J3521M
J3522M
J3524M
J3527M
J3530M
J3532M
J3536M
J3537M
J3538M
J3540M
J3541M
J3542M
J3544M
J3546M
J3548M
J3550M
J3552M
J3555M
J3560M
J3565M
Size (mm)
19
21
22
24
27
30
32
36
37
38
40
41
42
44
46
48
50
52
55
60
65
Outside Head Width (in (C)
1-11/16
1-11/16
1-11/16
1-7/8
1-7/8
2-1/16
2-1/16
2-1/2
2-1/2
2-1/2
2-5/8
2-5/8
2-5/8
2-5/8
3-1/8
3-1/8
3-1/8
3-1/2
3-1/2
3-1/2
3-1/2
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
9/32
9/32
9/32
9/32
9/32
5/16
5/16
5/16
5/16
5/16
5/16
Overall Length (in)
6-1/4
6-1/4
6-1/4
6-7/8
6-7/8
7
7
7-5/8
7-5/8
7-5/8
7-5/8
7-5/8
7-5/8
7-5/8
7-5/8
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
8-1/2
Weight (lbs)
0.22
0.22
0.22
0.25
0.25
0.31
0.30
0.45
0.43
0.42
0.43
0.43
0.43
0.43
0.70
0.70
0.68
0.66
0.66
0.61
0.57
open-end
Wrenches
>
626
FaCom® insulateD vse metriC oPen enD WrenChes
>
>
Product #
FM-46.8AVSE
FM-46.9AVSE
FM-46.10AVSE
FM-46.11AVSE
FM-46.12AVSE
FM-46.13AVSE
FM-46.14AVSE
FM-46.15AVSE
FM-46.16AVSE
FM-46.17AVSE
FM-46.18AVSE
FM-46.19AVSE
FM-46.21AVSE
Size (mm)
8
9
10
11
12
13
14
15
16
17
18
19
21
55/64
15/16
63/64
1-9/64
1-3/16
1-17/64
1-11/32
1-27/64
1-1/2
1-39/64
1-21/32
1-49/64
1-31/32
5/16
23/64
23/64
25/64
25/64
7/16
7/16
7/16
15/32
15/32
15/32
15/32
35/64
Product #: J47000CF
>
>
>
>
>
>
>
>
Contents
J4708CF
J4710CF
J4712CF
J4714CF
J4716CF
J4718CF
Crowfoot wrenches are used in hard to reach,
restricted access situations where a standard
wrench or ratchet cannot reach.
Anti-Slip Design open end (ASD).
The arched surfaces are designed to spread the contact forces
over a greater area and they keep the loads off the corners
of the fastener which helps prevent fastener rounding.
Broad size range ensures the right tool for
the application will be available.
Typically used in lower torque applications.
Full Polish finish provides corrosion resistance
Use with locking extensions to reach into spaces too small
for a mechanic’s arm or where the fastener is out of site.
Weight (lbs): 0.41
Size (in)
1/4
5/16
3/8
7/16
1/2
9/16
Weight (lbs)
0.07
0.09
0.11
0.12
0.14
0.17
0.20
0.20
0.26
0.29
0.33
0.34
0.40
Crowfoot
6 PieCe 1/4" Drive CroWFoot WrenCh set
Overall Length (in)
4-23/32
4-29/32
5-1/8
5-5/16
5-5/16
5-29/32
6-5/16
6- 5/16
6-11/16
7-3/32
7-3/32
7-11/16
7-9/32
Wrenches
>
orange to yellow if insulation integrity compromised.
Specific heat treatment and oiled quenching achieve
core hardness without embrittlement or distortion.
Size tolerances applied by Facom®
exceed standard specifications.
Overall Length (in)
15/16
1
1-1/16
1-5/32
1-3/16
1-9/32
ASME B107.21
Made in USA
627
Wrenches
With loCking extensions
Product #: J47000CFL
>
>
>
>
>
>
>
>
Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach
The arched surfaces are designed to spread the contact forces over a greater area and they keep
the loads off the corners of the fastener which helps prevent fastener rounding.
Broad size range ensures the right tool for the application will be available.
Full Polish finish provides corrosion resistance and easy to clean surfaces.
Use with locking extensions to reach into spaces too small for a mechanic’s arm or where the fastener is out of site.
Weight (lbs): 0.63
Contents
J4708CF
J4710CF
J4712CF
J4714CF
J4716CF
J4718CF
J4761L
J4759L
Size (in)
1/4
5/16
3/8
7/16
1/2
9/16
Locking Extension
Locking Extension
Overall Length (in)
15/16
1
1-1/16
1-5/32
1-3/16
1-9/32
6
2
Crowfoot
ASME B107.21
7 PieCe 1/4" Drive metriC CroWFoot WrenCh set
Product #: J47000MCF
>
>
>
>
>
>
>
>
Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach.
Weight (lbs): 0.47
Contents
J4707MCF
J4708MCF
J4710MCF
J4711MCF
J4712MCF
J4713MCF
J4714MCF
Size (mm)
7
8
10
11
12
13
14
Overall Length (in)
15/16
31/32
1-1/16
1-1/8
1-5/32
1-3/16
1-1/4
ASME B107.21
628
>
Product #: J49000CFL
Overall Length (in)
1-13/64
1-3/16
1-5/16
1-9/32
1-1/2
1-31/64
1-41/64
1-5/8
1-19/32
1-5/8
1-49/64
2-3/16
2-7/32
2-9/32
2-5/32
2-1/2
2-1/2
2-5/8
2-11/16
2-3/4
2-13/16
2-15/16
2-15/16
3-1/16
3-1/8
3-1/4
3-3/8
3-7/16
3-7/16
3-5/8
3-11/16
3-3/4
3-15/16
4-1/4
4-1/4
4-5/16
4-1/2
4-9/16
4-11/16
4-13/16
4-15/16
4-15/16
5
–
–
–
–
–
–
–
–
12
6
>
>
>
>
>
>
>
>
>
Crowfoot
Size (in)
Point Count
3/8
–
7/16
–
1/2
–
9/16
–
5/8
–
11/16
–
3/4
–
13/16
–
7/8
–
15/16
–
1
–
1-1/16
–
1-1/8
–
1-3/16
–
1-1/4
–
1-5/16
–
1-3/8
–
1-7/16
–
1-1/2
–
1-9/16
–
1-5/8
–
1-11/16
–
1-3/4
–
1-13/16
–
1-7/8
–
1-15/16
–
2
–
2-1/16
–
2-1/8
–
2-3/16
–
2-1/4
–
2-5/16
–
2-3/8
–
2-7/16
–
2-1/2
–
2-9/16
–
2-5/8
–
2-11/16
–
2-3/4
–
2-13/16
–
2-7/8
–
2-15/16
–
3
–
5/8
12
11/16
12
3/4
12
13/16
12
7/8
12
15/16
12
1
12
1-1/16
12
Locking Extension
–
Locking Extension
–
Wrenches
Contents
J4912CF
J4914CF
J4916CF
J4918CF
J4920CF
J4922CF
J4924CF
J4926CF
J4928CF
J4930CF
J4932CF
J4934CF
J4936CF
J4938CF
J4940CF
J4942CF
J4944CF
J4946CF
J4948CF
J4950CF
J4952CF
J4954CF
J4956CF
J4958CF
J4960CF
J4962CF
J4964CF
J4966CF
J4968CF
J4970CF
J4972CF
J4974CF
J4976CF
J4978CF
J4980CF
J4982CF
J4984CF
J4986CF
J4988CF
J4990CF
J4992CF
J4994CF
J4996CF
J4920FL
J4922FL
J4924FL
J4926FL
J4928FL
J4930FL
J4932FL
J4934FL
J5262L
J5260-06L
Crowfoot wrenches are used in hard to reach, restricted access
situations where a standard wrench or ratchet cannot reach.
Locking hole feature helps keep the crowfoot wrench
engaged on the extension during use reducing downtime
due to detachment of crowfoot in awkward spaces.
Use with locking extensions to reach into small
spaces or where the fastener is out of sight.
Locking hole on 3/8" drive crowfoot wrenches
available on fractional openings 1" and larger.
Weight (lbs): 26.14
ASME B107.21
Made in USA
629
>
Crowfoot
Wrenches
Product #: J49001CF
Contents
J4912CF
J4914CF
J4916CF
J4918CF
J4920CF
J4922CF
J4924CF
J4926CF
J4928CF
J4930CF
J4932CF
J4934CF
J4936CF
J4938CF
J4940CF
J4942CF
J4944CF
J4946CF
J4948CF
J4950CF
J4952CF
J4954CF
J4956CF
J4958CF
J4960CF
J4962CF
J4964CF
J4966CF
J4968CF
J4970CF
J4972CF
J4974CF
J4976CF
J4978CF
J4980CF
J4982CF
J4984CF
J4986CF
J4988CF
J4990CF
J4992CF
J4994CF
J4996CF
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
2-5/16
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
3
Overall Length (in)
1-13/64
1-3/16
1-5/16
1-9/32
1-1/2
1-31/64
1-41/64
1-5/8
1-19/32
1-5/8
1-49/64
2-3/16
2-7/32
2-9/32
2-5/32
2-1/2
2-1/2
2-5/8
2-11/16
2-3/4
2-13/16
2-15/16
2-15/16
3-1/16
3-1/8
3-1/4
3-3/8
3-7/16
3-7/16
3-5/8
3-11/16
3-3/4
3-15/16
4-1/4
4-1/4
4-5/16
4-1/2
4-9/16
4-11/16
4-13/16
4-15/16
4-15/16
5
>
>
>
>
>
>
>
>
>
Weight (lbs): 23.92
ASME B107.21
630
>
Product #: J49002CF
Overall Length (in)
1-13/64
1-3/16
1-5/16
1-9/32
1-1/2
1-31/64
1-41/64
1-5/8
1-19/32
1-5/8
1-49/64
2-3/16
2-7/32
2-9/32
2-5/32
2-1/2
2-1/2
2-5/8
2-11/16
2-3/4
2-13/16
2-15/16
2-15/16
3-1/16
3-1/8
3-1/4
3-3/8
ASME B107.21
Made in USA
>
>
>
>
>
>
>
>
>
Crowfoot
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
Wrenches
Contents
J4912CF
J4914CF
J4916CF
J4918CF
J4920CF
J4922CF
J4924CF
J4926CF
J4928CF
J4930CF
J4932CF
J4934CF
J4936CF
J4938CF
J4940CF
J4942CF
J4944CF
J4946CF
J4948CF
J4950CF
J4952CF
J4954CF
J4956CF
J4958CF
J4960CF
J4962CF
J4964CF
Weight (lbs): 6.74
631
16 PieCe 3/8" Drive metriC CroWFoot WrenCh set
>
Crowfoot
Wrenches
Product #: J49000-MCF
Contents
J4909MCF
J4910MCF
J4911MCF
J4912MCF
J4913MCF
J4914MCF
J4915MCF
J4916MCF
J4917MCF
J4918MCF
J4919MCF
J4920MCF
J4921MCF
J4922MCF
J4923MCF
J4924MCF
Size (mm)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Overall Length (in)
1-5/6
1-11/32
1-3/8
1-15/32
1-1/2
1-1/2
1-5/8
1-21/32
1-23/32
1-15/16
1-15/16
2-1/16
2-3/32
2-7/32
2-11/32
2-13/32
ASME B107.21
>
>
>
>
>
>
Weight (lbs): 2.59
>
Product #: J49003CF
Contents
J4912CF
J4914CF
J4916CF
J4918CF
J4920CF
J4922CF
J4924CF
J4926CF
J4928CF
J4930CF
J4932CF
J4934CF
J4936CF
J4938CF
J4940CF
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
Overall Length (in)
1-13/64
1-3/16
1-5/16
1-9/32
1-1/2
1-31/64
1-41/64
1-5/8
1-19/32
1-5/8
1-49/64
2-3/16
2-7/32
2-9/32
2-5/32
>
>
>
>
>
>
>
>
>
Weight (lbs): 2.07
ASME B107.21
632
Product #: J49004CF
>
>
>
>
>
>
>
Locking hole feature helps keep the crowfoot wrench engaged on the extension during use
reducing downtime due to detachment of crowfoot in awkward spaces.
Use with locking extensions to reach into small spaces or where the fastener is out of sight.
Locking hole on 3/8" drive crowfoot wrenches available on fractional openings 1" and larger.
Weight (lbs): 0.83
Contents
J4912CF
J4914CF
J4916CF
J4918CF
J4920CF
J4922CF
J4924CF
J4926CF
J4928CF
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
Wrenches
>
>
>
Overall Length (in)
1-13/64
1-3/16
1-5/16
1-9/32
1-1/2
1-31/64
1-41/64
1-5/8
1-19/32
ASME B107.21
>
Product #: J53000CF
Contents
J5330CF
J5332CF
J5334CF
J5336CF
J5338CF
J5340CF
J5342CF
J5344CF
J5346CF
J5348CF
J5350CF
J5352CF
J5354CF
J5356CF
J5358CF
J5360CF
J5364CF
J5368CF
J5372CF
J5376CF
J5378CF
J5380CF
Size (in)
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
2-1/8
2-1/4
2-3/8
2-7/16
2-1/2
Overall Length (in)
2-13/16
2-13/16
2-7/8
3
3
3-5/16
3-5/16
3-3/8
3-3/8
3-7/16
3-1/2
3-1/2
3-13/16
3-13/16
3-7/8
3-7/8
3-15/16
4-1/16
4-3/8
4-7/16
4-7/16
4-1/2
>
>
>
>
>
>
Crowfoot
Weight (lbs): 16.35
ASME B107.21
Made in USA
633
>
Wrenches
Product #: J53001CF
Contents
J5334CF
J5336CF
J5338CF
J5340CF
J5342CF
J5344CF
J5346CF
J5348CF
J5350CF
J5352CF
J5354CF
J5356CF
J5358CF
J5360CF
J5364CF
Size (in)
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
Overall Length (in)
2-7/8
3
3
3-5/16
3-5/16
3-3/8
3-3/8
3-7/16
3-1/2
3-1/2
3-13/16
3-13/16
3-7/8
3-7/8
3-15/16
>
>
>
>
>
>
Weight (lbs): 9.88
ASME B107.21
1/4" Drive Full Polish CroWFoot WrenChes
Crowfoot
>
>
>
>
>
>
Anti-Slip Design Open End (ASD).
The arched surfaces are designed to spread the contact forces over a greater area and they
keep the loads off the corners of the fastener which helps prevent fastener rounding.
Product #
J4708CF
J4710CF
J4712CF
J4714CF
J4716CF
J4718CF
Size (in)
1/4
5/16
3/8
7/16
1/2
9/16
15/16
0.02
1
0.03
1-1/16
0.03
1-5/32
0.04
1-3/16
0.05
1-9/32
0.05
ASME B107.21
1/4" Drive Full Polish metriC CroWFoot WrenChes
>
>
>
>
>
>
Product # Size (mm) Overall Length (in) Weight (lbs)
J4707MCF
7
15/16
0.02
J4708MCF
8
31/32
0.02
J4710MCF
10
1-1/16
0.03
J4711MCF
11
1-1/8
0.04
J4712MCF
12
1-5/32
0.04
J4713MCF
13
1-3/16
0.05
J4714MCF
14
1-1/4
0.05
ASME B107.21
634
1-13/64
0.06
1-3/16
0.06
1-5/16
0.07
1-9/32
0.07
1-1/2
0.09
1-31/64
0.09
1-41/64
0.11
1-5/8
0.11
1-19/32
0.12
1-5/8
0.13
1-49/64
0.13
2-3/16
0.24
2-7/32
0.24
2-9/32
0.24
2-5/32
0.21
2-1/2
0.25
2-1/2
0.29
2-5/8
0.29
2-11/16
0.33
2-3/4
0.34
2-13/16
0.38
2-15/16
0.36
2-15/16
0.39
3-1/16
0.4
3-1/8
0.45
3-1/4
0.49
3-3/8
0.73
3-7/16
0.71
3-7/16
0.74
3-5/8
0.78
3-11/16
0.89
3-3/4
0.9
3-15/16
1.01
4-1/4
1.03
4-1/4
1.1
4-5/16
1.11
4-1/2
1.27
4-9/16
1.34
4-11/16
1.37
4-13/16
1.38
4-15/16
1.52
4-15/16
1.58
5
1.55
>
>
>
>
>
>
>
Crowfoot
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
2-5/16
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
3
Wrenches
Product #
J4912CF
J4914CF
J4916CF
J4918CF
J4920CF
J4922CF
J4924CF
J4926CF
J4928CF
J4930CF
J4932CF
J4934CF
J4936CF
J4938CF
J4940CF
J4942CF
J4944CF
J4946CF
J4948CF
J4950CF
J4952CF
J4954CF
J4956CF
J4958CF
J4960CF
J4962CF
J4964CF
J4966CF
J4968CF
J4970CF
J4972CF
J4974CF
J4976CF
J4978CF
J4980CF
J4982CF
J4984CF
J4986CF
J4988CF
J4990CF
J4992CF
J4994CF
J4996CF
ASME B107.21
fastener in place.
>
>
Made in USA
rounding.
635
Wrenches
>
>
>
>
>
>
>
Crowfoot
>
>
Locking hole feature helps keep the crowfoot wrench engaged on the extension during use
reducing downtime due to detachment of crowfoot in awkward spaces.
Locking hole on 3/8" drive crowfoot wrenches available on fractional openings 1" and larger.
Product #
J4909MCF
J4910MCF
J4911MCF
J4912MCF
J4913MCF
J4914MCF
J4915MCF
J4916MCF
J4917MCF
J4918MCF
J4919MCF
J4920MCF
J4921MCF
J4922MCF
J4923MCF
J4924MCF
9
1-5/6
0.05
10
1-11/32
0.05
11
1-3/8
0.07
12
1-15/32
0.07
13
1-1/2
0.06
14
1-1/2
0.07
15
1-5/8
0.10
16
1-21/32
0.09
17
1-23/32
0.10
18
1-15/16
0.13
19
1-15/16
0.13
20
2-1/16
0.13
21
2-3/32
0.14
22
2-7/32
0.15
23
2-11/32
0.19
24
2-13/32
0.19
ASME B107.21
Product #
J5330CF
J5332CF
J5334CF
J5336CF
J5338CF
J5340CF
J5342CF
J5344CF
J5346CF
J5348CF
J5350CF
J5352CF
J5354CF
J5356CF
J5358CF
J5360CF
J5364CF
J5368CF
J5372CF
J5376CF
J5378CF
J5380CF
Size (in)
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
2-1/8
2-1/4
2-3/8
2-7/16
2-1/2
2-13/16
0.47
2-13/16
0.46
2-7/8
0.51
3
0.54
3
0.58
3-5/16
0.66
3-5/16
0.66
3-3/8
0.72
3-3/8
0.75
3-7/16
0.77
3-1/2
0.80
3-1/2
0.83
3-13/16
0.95
3-13/16
0.98
3-7/8
1.01
3-7/8
1.05
3-15/16
1.10
4-1/16
1.09
4-3/8
1.27
4-7/16
1.29
4-7/16
1.28
4-1/2
1.25
>
>
>
>
>
>
>
>
ASME B107.21
636
20
2-19/32
0.43
21
2-37/64
0.43
22
2-13/16
0.45
23
2-13/16
0.47
24
2-51/64
0.47
25
2-27/32
0.48
26
2-29/32
0.49
27
2-29/32
0.51
28
3
0.54
29
3-1/32
0.58
30
3-1/32
0.66
32
3-19/64
0.66
35
3-23/64
0.72
36
3-13/32
0.75
38
3-7/16
0.77
41
3-1/2
0.83
42
3-51/64
0.95
46
3-55/64
1.01
>
>
>
>
>
>
>
>
Wrenches
Product #
J5320MCF
J5321MCF
J5322MCF
J5323MCF
J5324MCF
J5325MCF
J5326MCF
J5327MCF
J5328MCF
J5329MCF
J5330MCF
J5332MCF
J5335MCF
J5336MCF
J5338MCF
J5341MCF
J5342MCF
J5346MCF
ASME B107.21
Product #: J49000CFFN
>
>
>
>
>
>
Contents
J4920FL
J4922FL
J4924FL
J4926FL
J4928FL
J4930FL
J4932FL
J4934FL
Crowfoot wrenches are used in hard to
reach, restricted access situations where a
standard wrench or ratchet cannot reach.
Broad size range ensures the right tool
for the application will be available.
12 point flare nut end allows for fine indexing,
Weight (lbs): 1.15
Size (in)
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
Crowfoot
8 PieCe 3/8" Drive Flare nut CroWFoot WrenCh set
Point Count
12
12
12
12
12
12
12
12
ASME B107.21
Made in USA
637
Crowfoot
Wrenches
>
Product #: J53000CFLFN
Contents
J5330CF
J5332CF
J5334CF
J5336CF
J5338CF
J5340CF
J5342CF
J5344CF
J5346CF
J5348CF
J5350CF
J5352CF
J5354CF
J5356CF
J5358CF
J5360CF
J5364CF
J5368CF
J5372CF
J5376CF
J5378CF
J5380CF
J5336FL
J5338FL
J5340FL
J5342FL
J5344FL
J5346FL
J5348FL
J5350FL
J5352FL
J5354FL
J5356FL
J5358FL
J5360FL
J5362FL
J5364FL
J5461L
J5463L
Size (in)
Point Count
15/16
–
1
–
1-1/16
–
1-1/8
–
1-3/16
–
1-1/4
–
1-5/16
–
1-3/8
–
1-7/16
–
1-1/2
–
1-9/16
–
1-5/8
–
1-11/16
–
1-3/4
–
1-13/16
–
1-7/8
–
2
–
2-1/8
–
2-1/4
–
2-3/8
–
2-7/16
–
2-1/2
–
1-1/8
12
1-3/16
12
1-1/4
12
1-5/16
12
1-3/8
12
1-7/16
12
1-1/2
12
1-9/16
12
1-5/8
12
1-11/16
12
1-3/4
12
1-13/16
12
1-7/8
12
1-15/16
12
2
12
Locking Extension
–
Locking Extension
–
Overall Length (in)
2-13/16
2-13/16
2-7/8
3
3
3-5/16
3-5/16
3-3/8
3-3/8
3-7/16
3-1/2
3-1/2
3-13/16
3-13/16
3-7/8
3-7/8
3-15/16
4-1/16
4-3/8
4-7/16
4-7/16
4-1/2
2-13/16
2-7/8
3
3-1/16
3-5/16
3-3/8
3-7/16
3-9/16
3-3/4
3-13/16
3-7/8
4
4-1/4
4-5/16
4-7/16
5
10
>
>
>
>
>
>
>
>
>
12 point allows for fine indexing, helping
to improve speed and access.
Locking hole feature helps keep the crowfoot wrench engaged
on the extension during use, helping to reduce downtime due
to the detachment of the crowfoot in an awkward space.
Weight (lbs): 23.80
ASME B107.21
638
15 PieCe 1/2" Dr CroWFoot Flare nut WrenCh set
>
Contents
J5336FL
J5338FL
J5340FL
J5342FL
J5344FL
J5346FL
J5348FL
J5350FL
J5352FL
J5354FL
J5356FL
J5358FL
J5360FL
J5362FL
J5364FL
Size (in)
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
Point Count
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Overall Length (in)
2-13/16
2-7/8
3
3-1/16
3-5/16
3-3/8
3-7/16
3-9/16
3-3/4
3-13/16
3-7/8
4
4-1/4
4-5/16
4-7/16
>
>
>
>
>
>
12 point flare nut allows for fine indexing,
Weight (lbs): 5.86
Wrenches
Product #: J53000CFFN
ASME B107.21
flare nut
3/8" Drive Full Polish Flare nut
CroWFoot WrenChes - 12 Point
>
>
>
>
>
>
Designed for speed and safety.
Special heat-treated alloy steel helps
increase strength and durability.
12 Point Box end allows for fine indexing, helping to improve
Full Polish finish provides corrosion
Locking hole helps hold crowfoot in place during use.
Use with a locking extension to help prevent
tool loss in awkward locations.
Product #
J4920FL
J4922FL
J4924FL
J4926FL
J4928FL
J4930FL
J4932FL
J4934FL
Size (in)
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
63/64
1-3/64
1-11/64
1-1/16
1-11/32
1-27/64
1-1/2
1-37/64
11/16
11/16
23/32
23/32
3/4
3/4
25/32
25/32
Offset Height (in) (E)
3/4
51/64
27/32
57/64
63/64
61/64
1-1/32
1-1/16
Weight (lbs)
0.09
0.10
0.12
0.12
0.16
0.17
0.18
0.20
ASME B107.21
Made in USA
639
Wrenches
>
>
>
>
>
>
Flare Nut Crowfoot wrenches are used in hard to reach or restricted access
situations where a standard flare nut wrench cannot reach.
The flare nut slot opening is used to slide over hydraulic lines or other hoses
which allows for easy access to hex connectors at ends.
Typically used in low torque applications.
Locking hole feature helps keep the crowfoot engaged on the extension during use,
helping to reduce downtime and improve working efficiency.
Use with locking extensions to reach into small spaces where the fastener is out of sight.
Product #
J4912HFL
J4914HFL
J4916HFL
J4918HFL
J4920HFL
J4922HFL
J4924HFL
J4926HFL
Size (in) Overall Length (in) Weight (lbs)
3/8
1-13/16
0.07
7/16
1-1/2
0.08
1/2
1-5/8
0.10
9/16
1-5/8
0.11
5/8
1-3/4
0.13
11/16
1-13/16
0.13
3/4
1-15/16
0.16
13/16
2
0.18
flare nut
ASME B107.21
3/8" Drive Full Polish metriC Flare nut
>
>
>
>
>
>
Flare Nut Crowfoot wrenches are used in hard to reach or restricted access
situations where a standard flare nut wrench cannot reach.
The flare nut slot opening is used to slide over hydraulic lines or other hoses
which allows for easy access to hex connectors at ends.
Typically used in low torque applications.
Locking hole feature helps keep the crowfoot engaged on the extension during use,
helping to reduce downtime and improve working efficiency.
Use with locking extensions to reach into small spaces where the fastener is out of sight.
Product # Size (mm) Overall Length (in) Weight (lbs)
J4909MHFL
9
1-5/16
0.07
J4910MHFL
10
1-3/8
0.07
J4911MHFL
11
1-1/2
0.08
J4912MHFL
12
1-1/2
0.08
J4913MHFL
13
1-9/16
0.09
J4914MHFL
14
1-5/8
0.11
J4915MHFL
15
1-11/16
0.11
J4916MHFL
16
1-3/4
0.12
J4917MHFL
17
1-3/4
0.13
J4918MHFL
18
1-13/16
0.14
ASME B107.21
640
Size (in) Overall Length (in) Weight (lbs)
1-1/8
2-13/16
0.19
1-3/16
2-7/8
0.19
1-1/4
3
0.19
1-5/16
3-1/16
0.19
1-3/8
3-5/16
0.25
1-7/16
3-3/8
0.25
1-1/2
3-7/16
0.25
1-9/16
3-9/16
0.31
1-5/8
3-3/4
0.31
1-11/16
3-13/16
0.31
1-3/4
3-7/8
0.38
1-13/16
4
0.38
1-7/8
4-1/4
0.45
1-15/16
4-5/16
0.5
2
4-7/16
0.5
>
>
>
>
Designed for speed and safety.
Special heat-treated alloy steel helps
increase strength and durability.
12 Point Box end allows for fine indexing, helping to improve
Wrenches
Product #
J5336FL
J5338FL
J5340FL
J5342FL
J5344FL
J5346FL
J5348FL
J5350FL
J5352FL
J5354FL
J5356FL
J5358FL
J5360FL
J5362FL
J5364FL
ASME B107.21
7 PieCe Combination Flare nut WrenCh set - 6 Point
Contents
J3751
J3752
J3753
J3754
J3755
J3756
J3757
J25TR03C
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Tool Roll
Point Count
6
6
6
6
6
6
6
Flare nut box end incorporates the TorquePlus™ system.
Weight (lbs): 2.24
Overall Length (in)
5-11/16
6-1/32
6-7/16
6-15/16
7-5/8
8-11/16
9-3/16
flare nut
>
>
>
Product #: J3700A
ASME B107.21
7 PieCe Combination Flare nut WrenCh set - 12 Point
>
>
Product #: J3700AT
Contents
J3751T
J3752T
J3753T
J3754T
J3755T
J3756T
J3757T
J25TR03C
Size (in)
3/8
1/2
7/16
9/16
5/8
11/16
3/4
Tool Roll
Point Count
12
12
12
12
12
12
12
Overall Length (in)
5-11/16
6-1/32
6-7/16
6-15/16
7-5/8
8-11/16
9-3/16
>
>
>
12 point flare nut box end allows for fine indexing,
Flare nut box end incorporates the TorquePlus™ system.
Weight (lbs): 2.24
ASME B107.21
Made in USA
641
satin Combination Flare nut WrenChes - 6 Point
Wrenches
>
>
Flare nut box end incorporates the TorquePlus™
system.
Product Size (in)
Throat
Outside Head Head Thickness Throat Depth Outside Head Head Thickness Overall Weight
#
(A) Depth (in) (B) Width (in) (C)
(in) (D)
(in) (B1) Width (in) (C1)
(in) (D1)
Length (in) (lbs)
J3751
3/8
7/16
25/32
11/32
19/64
51/64
23/65
5-11/16 0.12
J3752
7/16
33/64
7/8
3/8
23/64
59/64
13/32
6-1/32 0.16
J3753
1/2
19/32
31/32
3/8
25/64
1-1/32
13/32
6-7/16 0.21
J3754
9/16
43/64
1-3/64
7/16
26/64
1-11/64
15/32
6-15/16 0.34
J3755
5/8
47/64
1-3/32
7/16
33/64
1-9/64
15/32
7-5/8
0.45
J3756 11/16
51/64
1-3/16
1/2
9/16
1-13/32
17/32
8-11/16 0.45
J3757
3/4
57/64
1-7/32
1/2
9/16
1-9/16
17/32
9-3/16 0.49
ASME B107.100
satin Combination Flare nut WrenChes - 12 Point
>
>
flare nut
>
>
Flare nut box end incorporates the TorquePlus™
system.
Product Size (in) Throat Depth Outside Head Head Thickness Throat Depth Outside Head Head Thickness
#
(A)
(in) (B)
Width (in) (C)
(in) (D)
(in) (B1) Width (in) (C1)
(in) (D1)
J3751T
3/8
7/16
25/32
11/32
19/64
51/64
3/8
J3752T
1/2
33/64
7/8
3/8
23/64
29/32
13/32
J3753T
7/16
19/32
31/32
3/8
25/64
1-1/32
13/32
J3754T
9/16
43/64
1-3/64
7/16
29/64
1-3/64
15/32
J3755T
5/8
47/64
1-3/32
7/16
33/64
1-19/64
15/32
J3756T 11/16
51/64
1-3/16
1/2
9/16
1-13/32
17/32
J3757T
3/4
57/64
1-7/32
1/2
9/16
1-9/16
17/32
Overall Weight
Length (in) (lbs)
5-11/16
0.13
6-1/32
0.18
6-7/16
0.19
6-15/16
0.25
7-5/8
0.32
8-11/16
0.42
9-3/16
0.46
ASME B107.100
3 PieCe Double enD Flare nut WrenCh set - 6 Point
Product #: J3760
>
>
>
Flare nut box ends incorporate
the TorquePlus™ system.
Weight (lbs): 0.97
Contents
J3764
J3768
J3772
J25TR17C
Size (in)
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
Tool Roll
Point Count
6
6
6
Overall Length (in)
6-1/4
7-1/2
8-3/4
ASME B107.100
642
5 PieCe metriC Double enD Flare nut WrenCh set - 6 Point
Product #: J3700M
>
>
Flare nut box ends incorporates
Weight (lbs): 1.25
Contents
J3707M
J3709M
J3710M
J3713M
J3715M
J25TR06C
Size (mm)
7 x 8
9 x 11
10 x 12
13 x 14
15 x 17
Tool Roll
Point Count
6
6
6
6
6
Wrenches
>
Overall Length (in)
5-11/16
6-5/16
6-15/16
7-9/16
7-63/64
ASME B107.100
3 PieCe Double enD Flare nut WrenCh set - 12 Point
Product #: J3760T
>
>
Contents
J3764T
J3768T
J3772T
J25TR17C
Size (in)
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
Tool Roll
Point Count
12
12
12
Overall Length (in)
6-1/4
7-1/2
8-3/4
flare nut
>
>
>
Flare nut box ends incorporate the TorquePlus™ system.
Weight (lbs): 0.97
ASME B107.100
5 PieCe metriC Double enD Flare nut WrenCh set - 12 Point
Product #: J3700MT
>
>
>
>
>
Flare nut ends incorporate the TorquePlus™ system.
Weight (lbs): 1.29
Contents
J3707MT
J3709MT
J3710MT
J3713MT
J3715MT
J25TR06C
Size (in)
7 x 8
9 x 11
10 x 12
13 x 14
15 x 17
Tool Roll
Point Count
12
12
12
12
12
Overall Length (in)
5-11/16
6-5/16
6-15/16
7-9/16
7-63/64
ASME B107.100
Made in USA
643
satin Double enD Flare nut WrenChes - 6 Point
Wrenches
>
>
Flare nut box ends incorporate the TorquePlus™
system.
Product
Mouth Width Outside Head Head Thickness Mouth Width Outside Head Head Thickness Overall
#
Size (in)
(in) (A)
Width (in) (C)
(in) (D)
(in) (A1) Width (in) (C1)
(in) (D1)
Length (in)
J3764 3/8 x 7/16
19/64
51/64
11/32
23/64
57/64
3/8
6-1/4
J3768 1/2 x 9/16
25/64
31/32
3/8
13/32
1-3/64
7/16
7-1/2
J3772 5/8 x 11/16
33/64
1-7/64
7/16
37/64
1-13/64
31/64
8-3/4
Weight
(lbs)
0.18
0.27
0.38
ASME B107.100
satin metriC Double enD Flare nut WrenChes - 6 Point
>
>
system.
flare nut
Product
#
J3707M
J3709M
J3710M
J3713M
J3715M
J3716M
J3719M
Size Mouth Width Outside Head Head Thickness Mouth Width Outside Head Head Thickness
(mm)
(in) (A)
Width (in) (C)
(in) (D)
(in) (D1)
7 x 8
7/32
43/64
19/64
15/64
3/4
21/64
9 x 11
9/32
13/16
23/64
11/32
29/32
25/64
10 x 12
9/32
55/64
25/64
11/32
61/64
25/64
13 x 14
3/8
1-1/64
25/64
7/16
1-3/32
29/64
15 x 17
7/16
1-7/64
29/64
1/2
1-3/16
31/64
16 x 18
1/2
1-9/64
29/64
37/64
1-15/64
33/64
19 x 21
37/64
1-9/32
35/64
5/8
1-3/8
37/64
Overall
Length (in)
5-11/16
6-5/16
6-15/16
7-9/16
7-63/64
8-13/16
9-3/8
Weight
(lbs)
0.12
0.17
0.22
0.26
0.37
0.39
0.6
ASME B107.100
satin Double enD Flare nut WrenChes - 12 Point
>
>
>
>
system.
Product
Mouth Width Outside Head Head Thickness Mouth Width Outside Head Head Thickness Overall Weight
#
Size (in)
(in) (A) Width (in) (C)
(in) (D)
(in) (D1)
Length (in) (lbs)
J3764T 3/8 x 7/16
19/64
51/64
11/32
23/64
57/64
3/8
6-1/4
0.18
J3768T 1/2 x 9/16
25/64
31/32
3/8
13/32
1-1/16
7/16
7-1/2
0.27
J3772T 5/8 x 11/16
33/64
1-7/64
7/16
37/64
1-13/64
31/64
8-3/4
0.38
ASME B107.100
644
satin metriC Double enD Flare nut WrenChes - 12 Point
>
>
>
Product
#
J3707MT
J3709MT
J3710MT
J3713MT
J3715MT
J3716MT
J3719MT
Wrenches
>
Flare nut box ends incorporate
Size
Mouth Width Outside Head Head Thickness Mouth Width Outside Head Head Thickness Overall
(mm)
(in) (A)
Width (in) (C)
(in) (D)
(in) (D1)
Length (in)
7 x 8
7/32
43/64
19/64
15/64
3/4
21/64
5-11/16
9 x 11
9/32
13/16
23/64
11/32
29/32
25/64
6-5/16
10 x 12
9/32
55/64
25/64
11/32
61/64
25/64
6-15/16
13 x 14
3/8
1-1/64
25/64
7/16
1-3/32
29/64
7-9/16
15 x 17
7/16
1-7/64
29/64
1/2
1-3/16
31/64
7-63/64
16 x 18
1/2
1-9/64
29/64
37/64
1-15/64
33/64
8-13/16
19 x 21
37/64
1-9/32
35/64
5/8
1-3/8
37/64
9-7/16
Weight
(lbs)
0.11
0.16
0.21
0.24
0.33
0.36
0.39
ASME B107.100
L
D
flare nut
C
L
7 PieCe ratCheting Flare nut WrenCh set - 12 Point
Product #: J3800A
>
>
>
>
>
Black oxide finish.
Weight (lbs): 1.93
Contents
J3812
J3814
J3816
J3818
J3820
J3822
J3824
J25TR03C
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
Tool Roll
Point Count
12
12
12
12
12
12
12
Overall Length (in)
5-7/16
5-7/16
5-7/16
7-1/4
7-1/4
7-1/4
7-1/4
Made in USA
645
blaCk oxiDe ratCheting Flare nut WrenChes - 12 Point
Wrenches
>
>
>
>
Black oxide finish.
Product #
J3812
J3814
J3816
J3818
J3820
J3822
J3824
J3826
J3828
J3830
J3832
Size (in)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1
1
1
1-5/16
1-5/16
1-5/16
1-5/16
1-11/16
1-11/16
1-11/16
1-11/16
9/32
9/32
9/32
3/8
3/8
3/8
3/8
7/16
7/16
1/2
1/2
Overall Length (in)
5-7/16
5-7/16
5-7/16
7-1/4
7-1/4
7-1/4
7-1/4
9-3/8
9-3/8
9-3/8
9-3/8
Weight (lbs)
0.17
0.17
0.17
0.31
0.31
0.31
0.31
0.58
0.58
0.58
0.58
blaCk oxiDe box enD sPuD WrenChes - 12 Point
>
>
>
spud
>
>
Ideal for heavy construction and field service work.
High leverage handle and strong box end
designed to turn stubborn nuts and bolts.
Tapered spud end aligns flange holes.
12 point box end allows for fine indexing
Product #
J2613
J2614
J2615
J2616
J2617
J2618
J2620
J2621
J2623
J2624
J2626
J2627
J2629
J2630
J2632
J2635
J2638
J2641
J2644
Size (in) Outside Head Width (in) (C) Head Thickness (in) (D)
13/16
1-11/32
5/8
7/8
1-11/32
5/8
15/16
1-11/32
5/8
1
1-9/16
11/16
1-1/16
1-19/32
11/16
1-1/8
1-45/64
13/16
1-1/4
1-25/32
13/16
1-5/16
2-1/8
15/16
1-7/16
2-1/8
15/16
1-1/2
2-3/16
1
1-5/8
2-15/32
1-1/8
1-11/16
2-15/32
1-1/8
1-13/16
2-29/32
1-3/16
1-7/8
2-29/32
1-3/16
2
3-5/32
1-7/16
2-3/16
3-15/32
1-9/16
2-3/8
3-23/32
1-1/2
2-9/16
4
1-1/2
2-3/4
4
1-1/2
Offset Height (in) (E) Overall Length (in) Weight (lbs)
1-3/32
12
0.87
1-3/32
14-1/2
0.85
1-3/32
13-1/2
1.25
1-5/16
1-1/2
1.22
1-5/16
15
1.57
1-1/16
15
1.50
1-1/16
17
2.38
1-3/8
17-3/32
2.19
1-3/8
21-5/16
3.10
1-1/2
21-3/16
3.05
1-1/2
22-3/32
4.70
1-1/2
22-5/16
4.91
1-9/16
23-5/16
5.84
1-9/16
23
5.99
1-21/32
24
7.04
1-7/8
26
8.93
2
28
9.96
2-1/4
29
11.24
2-1/4
30
14.34
C
D
E
L
646
blaCk oxiDe oPen enD sPuD WrenChes - oFFset heaD
>
>
>
Product #
JC901B
JC903A
JC903
JC904A
JC905A
JC905
JC906C
JC906B
JC907
JC907A
JC908
JC908A
JC909
JC909A
JC910
JC910A
JC911
JC911A
JC912
Size (in)
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-1/4
1-5/16
1-7/16
1-1/2
1-5/8
1-11/16
1-13/16
1-7/8
2
Outside Head Width (in) (C) Head Thickness (in) (D) Offset Height (in) (E) Overall Length (in) Weight (lbs)
1-9/16
7/16
3/4
11-1/2
0.76
1-9/16
7/16
3/4
12
0.76
1-9/16
7/16
3/4
11-13/16
0.77
1-7/8
7/16
3/4
11-13/16
0.76
2
9/16
7/8
14-1/2
1.29
2-3/16
9/16
7/8
14-1/2
1.23
2-3/16
9/16
7/8
14-1/2
1.30
2-3/16
9/16
7/8
14-3/16
1.29
2-7/16
21/32
1
17-3/16
1.88
2-7/16
21/32
1
16-11/16
1.79
2-3/4
13/16
1-1/4
19
2.78
2-3/4
13/16
1-1/4
19-3/32
2.79
3-1/8
13/16
1-1/4
20
3.54
3-1/8
13/16
1-1/4
20
3.79
3-1/8
13/16
1-5/8
23
5.68
3-5/8
13/16
1-5/8
22-13/16
5.41
4-1/8
13/16
1-5/8
24
7.35
4-1/8
13/16
1-5/8
24
7.23
4-7/16
13/16
1-5/8
24
7.5
Wrenches
>
Long offset handle provides greater leverage
and clearance for knuckles and obstructions.
Hardened tapered handle aligns bolt and rivet holes.
Openings are precision broached for proper fit.
spud
C
L
D
E
blaCk oxiDe aDjustable sPuD WrenCh
>
>
>
>
>
Non-Reflective black oxide finish for use
where none plated products are required.
Large jaw opening fits all nuts and
bolts up to 1-1/2 inches.
Square jaw opening provides strength and tight fit.
Eliminates the need for carrying
several fixed size wrenches.
Hardened taper handle aligns bolt and rivet holes.
Product #
J712SC
Max Opening Overall Length
(in)
(in)
Weight (lbs)
1-1/2
16-3/32
2.45
blaCk oxiDe sPuD hanDle 1/2" Drive Pear heaD ratChet
>
>
>
Tapered handle for aligning bolt holes.
Spring-loaded pellet in male drive plug.
Black oxide finish.
Product #
J5449-14BL
Overall Length (in)
14
Weight (lbs)
2.03
ASME B107.500
Made in USA
647
blaCk oxiDe heavY-DutY striking WrenChes - 6 Point
Wrenches
>
>
>
>
>
>
>
Large striking surface for surer blow contact and
more efficient transmittal of force to fastener.
Short handle permits use in close quarters.
Box opening designed to remain on fastener when wrench is struck.
For use where extreme force is necessary
to loosen or set large fasteners.
Heavy box walls provide greater torque transmission.
Straight handle design helps prevent the
wrench from cocking when struck.
striking
Product #
J2717SW
J2720SW
J2723SW
J2726SW
J2729SW
J2732SW
J2735SW
J2738SW
J2741SW
J2744SW
J2747SW
J2750SW
J2756SW
J2762SW
Size (in)
1-1/16
1-1/4
1-7/16
1-5/8
1-13/16
2
2-3/16
2-3/8
2-9/16
2-3/4
2-15/16
3-1/8
3-1/2
3-7/8
1-25/32
2
2-17/64
2-31/64
2-21/32
3-1/32
3-9/32
3-13/32
3-3/4
4-11/64
4-23/64
4-31/64
4-31/32
5-35/64
5/8
23/32
7/8
61/64
63/64
1-7/32
1-15/64
1-7/16
1-17/32
1-17/32
1-17/32
1-41/64
1-23/32
1-23/32
Overall Length (in)
9-7/8
10-1/4
10-19/32
10-15/16
11-5/16
11-21/32
11-5/16
12-3/8
12-11/16
12-13/16
13-5/16
13-11/16
13-29/32
14-13/32
Weight (lbs)
1.62
1.72
2.49
3.17
3.49
4.73
5.33
5.63
6.47
7.56
7.81
9.50
10.54
12.76
C
C
D
D
E
L
L
blaCk oxiDe heavY-DutY striking WrenChes - 12 Point
>
>
>
>
>
>
>
>
>
Fits most 4, 6 and 12 point fasteners.
Straight handle design helps prevent the
wrench from cocking when struck.
Product #
JSN16
JSN17
JSN18
JSN19
JSN20
648
Size (in)
1
1-1/16
1-1/8
1-3/16
1-1/4
1-25/32
1-25/32
1-25/32
2
2
5/8
5/8
5/8
3/4
3/4
Overall Length (in)
9-7/8
9-7/8
9-7/8
10-1/4
10-1/4
Weight (lbs)
1.90
1.90
1.90
2.10
2.10
blaCk oxiDe heavY-DutY oFFset
striking WrenChes - 12 Point
>
>
>
>
>
Black oxide finish.
Box opening designed to remain on
fastener when wrench is struck.
Offset handle clears obstructions.
Overall
Size (in) Size (mm) Outside Head Width (in) (C) Head Thickness (in) (D) Offset Height (in) (E) Length (in)
1
1-25/32
5/8
15/16
8-1/2
1-1/16
27
1-11/16
5/8
15/16
8-1/2
1-1/8
1-11/16
5/8
15/16
11
1-3/16
30
2-1/16
13/16
13/16
10-3/4
1-1/4
1-7/8
13/16
13/16
10-3/4
1-5/16
1-7/8
13/16
13/16
11-1/2
1-3/8
35
2-25/64
1
1-1/2
12
1-7/16
2-3/16
1
1-1/2
12
1-1/2
38
2-3/16
1
1-1/2
12
1-9/16
2-21/32
1-1/8
1-7/16
12-1/4
1-5/8
2-13/32
1-1/8
1-1/2
12-1/4
1-11/16
43
2-13/32
1-1/8
1-1/2
13-7/16
1-3/4
2-19/32
1-3/16
1-9/16
13-7/16
1-13/16
2-21/32
1-3/16
1-9/16
13-7/16
1-7/8
2-27/32
1-1/4
1-21/32
13-7/16
1-15/16
2-27/32
1-1/4
1-7/8
13-7/16
2
51
2-27/32
1-1/4
1-21/32
13-7/16
2-1/16
3-1/8
1-1/4
2
13-1/2
2-1/8
54
3-1/8
1-1/2
2
13-7/8
2-3/16
3-3/8
1-1/2
2
13-1/2
2-1/4
57
3-3/8
1-1/2
2
13-1/2
2-5/16
3-3/8
1-1/2
2
13-1/2
2-3/8
3-3/8
1-1/2
2
13-1/2
2-7/16
3-13/16
1-1/2
2-1/4
13-1/2
2-1/2
64
4
1-1/2
2-1/4
13-1/2
2-9/16
4
1-1/2
2-1/4
13-1/2
2-5/8
4
1-1/2
2-1/4
13-1/2
2-11/16
4-7/32
1-1/2
2-1/4
13-1/2
2-3/4
4-7/32
1-1/2
2-1/4
13-1/2
2-7/8
73
4-25/32
1-7/8
2-5/8
16
2-15/16
4-7/16
1-7/8
2-5/8
16
3
4-7/16
1-7/8
2-5/8
16
3-1/16
4-25/32
1-7/8
2-5/8
16
3-1/8
4-7/16
1-7/8
2-5/8
16
3-3/8
6-1/4
2-3/8
3-5/8
18
3-1/2
6-1/4
2-3/8
3-5/8
18
3-3/4
6-1/4
2-3/8
3-5/8
18
3-7/8
6-1/4
2-3/8
3-5/8
18
4-1/8
6-1/4
2-3/8
3-5/8
18
4-1/4
6-1/4
2-3/8
3-5/8
18
Made in USA
Weight
(lbs)
1.84
1.84
1.79
2.55
2.58
2.59
3.40
3.29
3.35
3.89
4.00
3.88
3.90
5.30
5.24
5.20
5.16
6.82
6.71
6.78
6.30
7.94
7.86
7.67
7.62
13.43
10.42
10.25
10.18
13.84
13.60
13.44
13.37
13.18
26.88
26.37
25.03
24.58
23.47
22.75
striking
Product #
J2616SW
J2617SW
J2618SW
J2619SW
J2620SW
J2621SW
J2622SW
J2623SW
J2624SW
J2625SW
J2626SW
J2627SW
J2628SW
J2629SW
J2630SW
J2631SW
J2632SW
J2633SW
J2634SW
J2635SW
J2636SW
J2637SW
J2638SW
J2639SW
J2640SW
J2641SW
J2642SW
J2643SW
J2644SW
J2646SW
J2647SW
J2648SW
J2649SW
J2650SW
J2654SW
J2656SW
J2660SW
J2662SW
J2666SW
J2668SW
Wrenches
>
>
649
Wrenches
blaCk oxiDe heavY-DutY metriC oFFset
striking WrenChes - 12 Point
>
>
>
>
>
>
>
>
>
Offset Height (in) (E) Overall Length (in) Weight (lbs)
1-3/16
10-3/4
0.88
1-1/2
12-1/64
2.13
1-1/2
12-1/4
2.37
1-37/64
13-27/64
2.81
1-21/32
13-27/64
6.36
2-1/64
13-1/2
6.58
2-1/64
13-1/2
9.19
2-1/4
13-1/2
12.61
2-1/4
13-1/2
12.11
2-41/64
15-63/64
13.53
2-41/64
15-63/64
13.16
striking
Product # Size (mm) Outside Head Width (in) (C) Head Thickness (in) (D)
J2632SWM
32
1-57/64
53/64
J2636SWM
36
2-13/64
63/64
J2641SWM
41
2-13/32
1-7/64
J2646SWM
46
2-43/64
1-3/16
J2650SWM
50
2-53/64
1-17/64
J2655SWM
55
3-25/64
1-1/2
J2660SWM
60
3-25/64
1-1/2
J2665SWM
65
4-1/64
1-1/2
J2670SWM
70
4-1/64
1-1/2
J2675SWM
75
4-29/64
1-57/64
J2680SWM
80
4-29/64
1-57/64
blaCk oxiDe oFFset striking Dual
Dimension WrenChes - 12 Point
>
>
>
>
>
>
>
Black oxide finish.
Product #
J2617SW
J2619SW
J2622SW
J2624SW
J2627SW
J2632SW
J2634SW
J2636SW
J2640SW
J2646SW
650
Size (in)
1-1/16
1-3/16
1-3/8
1-1/2
1-11/16
2
2-1/8
2-1/4
2-1/2
2-7/8
Size (mm)
27
30
35
38
43
51
54
57
64
73
Outside Head Width
(in) (C)
1-11/16
2-1/16
2-25/64
2-3/16
2-13/32
2-27/32
3-1/8
3-3/8
4
4-25/32
Head Thickness
(in) (D)
5/8
13/16
1
1
1-1/8
1-1/4
1-1/2
1-1/2
1-1/2
1-7/8
Offset Height
(in) (E)
15/16
13/16
1-1/2
1-1/2
1-1/2
1-21/32
2
2
2-1/4
2-5/8
Overall Length (in)
8-1/2
10-3/4
12
12
13-7/16
13-7/16
13-7/8
13-1/2
13-1/2
16
Weight (lbs)
1.84
2.55
3.40
3.35
3.88
5.16
6.71
6.30
7.62
13.84
blaCk oxiDe oFFset slugging WrenChes
suPer heavY-DutY - 12 Point
>
>
>
>
>
>
12 point box end allows for fine indexing, helping improve speed and access.
Designed for heavy use in close quarters where hammer or sledge
is required to loosen frozen nuts or set large fasteners.
High strength rectangular design withstands heavy sledging;
transmits power more effectively to fastener.
Box opening designed to remain in place on fastener when wrench is struck.
Heavy box walls provide greater transmission of torque to fastener.
Straighter handle design than striking wrenches
resists springing, nut turns easier.
Outside Head Width
(in) (C)
2-3/8
2-3/8
2-3/8
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
3
3
3
3
3-9/16
3-9/16
4-1/8
4-1/8
4-1/8
4-1/8
4-1/8
4-1/8
4-5/8
4-5/8
4-5/8
4-5/8
5-1/4
5-1/4
5-1/2
5-1/2
6-1/8
6-1/8
6-5/8
6-5/8
Size (in)
1-5/16
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
2-1/16
2-1/8
2-3/16
2-1/4
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-3/4
2-13/16
2-15/16
3
3-1/8
3-3/8
3-1/2
3-3/4
3-7/8
4-1/8
4-1/4
4-1/2
4-5/8
Head Thickness
(in) (D)
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/4
1-5/16
1-5/16
1-5/16
1-3/8
1-3/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-7/8
1-7/8
1-7/8
1-7/8
2
2
2-1/2
2-1/2
2-7/8
2-7/8
3
3
Offset Height
(in) (E)
11/16
11/16
11/16
1
1
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
1-3/4
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
Overall Length
(in)
8-3/8
8-3/8
8-3/8
10
10-1/8
10-1/8
10-1/8
10-1/8
10-3/4
10-13/16
11
11
11
11
14-1/2
14-1/2
14-13/32
14-1/2
14-13/32
14-1/2
15-13/16
15-1/2
15-1/2
15-19/32
17-1/2
17-13/32
18-3/16
18
18-3/16
18-3/16
20
20-3/16
Weight
(lbs)
2.03
2.00
1.95
3.54
3.41
3.31
3.36
3.20
3.92
3.71
4.21
4.74
5.11
4.86
8.75
8.86
8.46
8.37
8.35
7.80
9.06
12.17
12.14
11.29
15.41
15.79
22.74
22.11
27.92
26.83
32.06
30.54
slugging
Product #
JUSN321
JUSN322
JUSN323
JUSN324
JUSN326
JUSN327
JUSN328
JUSN329
JUSN330
JUSN332
JUSN333
JUSN334
JUSN335
JUSN336
JUSN338
JUSN339
JUSN340
JUSN341
JUSN342
JUSN344
JUSN345
JUSN347
JUSN348
JUSN350
JUSN354
JUSN356
JUSN360
JUSN362
JUSN366
JUSN368
JUSN372
JUSN374
Wrenches
>
C
D
E
L
Made in USA
651
Wrenches
blaCk oxiDe metriC oFFset slugging
WrenChes suPer heavY-DutY - 12 Point
>
>
>
>
>
>
>
slugging
>
Designed for heavy use in close quarters
where hammer or sledge is required to loosen
frozen nuts or set large fasteners.
High strength rectangular design withstands heavy sledging.
Box opening designed to remain in place
on fastener when wrench is struck.
Heavy box walls provide greater
transmission of torque to fastener.
Straighter handle design than striking wrenches
resists springing, nut turns easier.
Product #
JHD032M
JHD036M
JHD041M
JHD046M
JHD050M
JHD055M
JHD060M
JHD065M
JHD070M
JHD075M
JHD080M
JHD085M
JHD090M
JHD095M
JHD100M
JHD105M
JHD110M
JHD115M
Size (mm)
32
36
41
46
50
55
60
65
70
75
80
85
90
95
100
105
110
115
Outside Head Width
(in) (C)
2-23/64
2-23/64
2-3/4
2-3/4
2-63/64
3-37/64
4-9/64
4-9/64
4-9/64
4-41/64
5-15/64
5-15/64
5-33/64
5-33/64
5-63/64
5-63/64
6-1/2
6-1/2
Head Thickness
(in) (D)
55/64
55/64
1-9/64
1-9/64
1-17/64
1-3/8
1-39/64
1-39/64
1-39/64
1-57/64
2-1/64
2-1/64
2-33/64
2-33/64
2-7/8
2-7/8
2-63/64
2-63/64
Offset Height
(in) (E)
43/64
43/64
63/64
63/64
1-7/64
1-17/64
1-1/2
1-1/2
1-1/2
1-47/64
1-27/32
1-27/32
1-57/64
1-57/64
1-31/32
1-31/32
2-3/64
2-3/64
Overall Length
(in)
8-25/64
8-25/64
10-1/8
10-1/8
10-3/4
10-63/64
14-31/64
14-31/64
14-31/64
15-3/4
17-23/64
17-23/64
17-3/4
17-3/4
17-63/64
17-63/64
17-63/64
19-49/64
Weight
(lbs)
1.27
1.27
1.36
1.31
1.80
2.27
3.63
3.50
3.36
12.15
11.35
16.96
15.16
22.75
28.51
27.26
33.22
31.89
C
D
E
L
652
FaCom® blaCk oxiDe metriC engineer WrenChes
>
Product #
FM-45.30
FM-45.32
FM-45.34
FM-45.36
FM-45.38
FM-45.41
FM-45.46
FM-45.50
FM-45.55
FM-45.60
FM-45.65
FM-45.70
FM-45.75
Size (mm)
30
32
34
36
38
41
46
50
55
60
65
70
75
2-7/16
2-19/32
2-19/32
2-29/32
2-29/32
3-23/64
3-49/64
4-1/64
4-27/64
4-53/64
5-9/64
5-5/8
5-15/16
7/16
15/32
15/32
1/2
1/2
17/32
5/8
5/8
5/8
23/32
23/32
25/32
13/16
Weight (lbs)
0.75
0.92
1.29
1.28
1.63
1.93
2.39
3.05
3.04
5.45
5.43
7.51
7.47
engineer
11 PieCe FaCom® metriC leverage
WrenChes anD hanDles
Overall Length (in)
10-1/4
11-7/32
12-5/32
12-13/32
12-19/32
13-3/8
15-9/16
16-23/32
16-23/32
18-1/2
18-1/2
19-11/16
19-11/16
Wrenches
>
>
>
Forged in carbon steel and hardened
to high torque applications.
Hook eye.
Black oxide finish.
Long handle for extra leverage
Product #: FM-54.P9M
>
Weight (lbs): 29.76
Contents
FM-54A.24
FM-54A.30
FM-54A.32
FM-54A.36
FM-54A.41
FM-54A.46
FM-54A.50
FM-54A.55
FM-54.M1B
FM-54.M2B
FM-54.M3B
Size (mm)
24
30
32
36
41
46
50
55
Handle
Handle
Handle
Point Count
12
12
12
12
12
12
12
12
Overall
Length (in)
7-3/32
8-9/32
9-7/16
9-27/32
10-5/8
11-1/32
11-5/8
11-11/16
18
23-1/2
30
Made in USA
653
FaCom® satin metriC leverage WrenChes
Wrenches
>
>
>
>
Separate removable handle used when
extra leverage is needed.
12 point, box end allows for fine indexing,
30° offset handle helps clear obstructions.
Product #
FM-54A.24
FM-54A.30
FM-54A.32
FM-54A.36
FM-54A.41
FM-54A.46
FM-54A.50
FM-54A.55
FM-54A.60
FM-54A.65
FM-54A.70
Size (mm)
24
30
32
36
41
46
50
55
60
65
70
Outside Head Width
(in) (C)
1-1/2
1-57/64
1-59/64
2-1/8
2-7/16
2-23/32
2-63/64
3-3/16
3-35/64
3-55/64
4-9/64
Head Thickness
(in) (D)
21/32
23/32
23/32
25/32
7/8
29/32
1
1-1/8
1-3/16
1-5/16
1-13/32
Overall Length (in)
7-3/32
8-9/32
9-7/16
9-27/32
10-5/8
11-1/32
11-5/8
11-11/16
13-25/32
14-3/8
14-3/8
Use Handle
FM-54.M1B
FM-54.M1B
FM-54.M2B
FM-54.M2B
FM-54.M2B
FM-54.M3B
FM-54.M3B
FM-54.M3B
FM-54.M4B
FM-54.M4B
FM-54.M4B
Weight (lbs)
0.89
1.09
1.60
1.71
2.05
2.61
3.11
3.27
4.95
5.39
6.05
leverage
FaCom® satin leverage WrenCh hanDles
>
>
Removable handle
Product #
FM-54.M1B
FM-54.M2B
FM-54.M3B
FM-54.M4B
Overall Length (in)
18
23-1/2
30
33-9/32
Weight (lbs)
1.35
2.44
4.73
6.31
3 PieCe aDjustable WrenCh set
Product #: J795
>
>
>
>
>
Extra wide jaw capacity.
Rugged I-beam style handle and reinforced
stress areas; radius corner design.
Weight (lbs): 2.6
Contents
J708
J710
J712
J25TR22C
Max. Opening (in)
1-1/8
1-5/16
1-1/2
Tool Roll
Overall Length (in)
8
10
12
ASME B107.100
654
3 PieCe Clik-stoP® aDjustable WrenCh set
Product #: J790
>
>
>
>
Clik-Stop® locking design holds the moving jaw of an
adjustable wrench in place when the wrench is in use.
Weight (lbs): 3.08
Contents
J708L
J710L
J712L
J25TR22C
Max. Opening (in)
1-1/8
1-5/16
1-1/2
Tool Roll
Wrenches
>
Overall Length (in)
8
10
12
ASME B107.100
satin Clik-stoP® aDjustable WrenChes
>
>
>
>
Clik-Stop® locking design holds the moving jaw of an adjustable
wrench in place when the wrench is in use.
Max Opening Overall
(in)
1/2
4
0.13
5/16
6
0.34
1-1/8
8
0.57
1-5/16
10
0.95
1-1/2
12
1.54
1-11/16
15
3.13
2-1/16
18
5.73
2-7/16
24
8.84
adjustable
Product #
J704L
J706L
J708L
J710L
J712L
J715L
J718L
J724L
ASME B107.100
blaCk oxiDe Clik-stoP® aDjustable WrenChes
>
>
>
>
Clik-Stop® locking design holds the moving jaw of an adjustable
wrench in place when the wrench is in use.
Product #
J704SL
J706SL
J708SL
J710SL
J712SL
J715SL
J718SL
Max Opening Overall
(in)
Length (in)
1/2
4
5/16
6
1-1/8
8
1-15/16
10
1-1/2
12
1-11/16
15
2-1/16
18
Weight (lbs)
0.14
0.28
0.57
1.06
1.50
3.07
5.60
ASME B107.100
Made in USA
655
Wrenches
Cushion griP aDjustable WrenChes
>
>
>
Soft cushion grip for additional comfort.
Product #
J704G
J706G
J708G
J710G
J712G
Max Opening Overall
(in)
1/2
4
0.13
15/16
6
0.25
1-1/8
8
0.59
1-5/16
10
0.80
1-1/2
12
1.61
ASME B107.100
satin aDjustable WrenChes
>
>
>
>
Rugged I-beam style handle and reinforced
stress areas; radius corner design.
adjustable
Product #
J704
J706
J708
J710
J712
J715
J718
J724
Max Opening Overall
(in)
1/2
4
0.17
15/16
6
0.28
1-1/8
8
0.58
1-5/16
10
0.90
1-1/2
12
1.58
1-11/16
15
3.00
2-1/16
18
4.26
2-7/16
24
6.41
AS4984
ASME B107.100
blaCk oxiDe aDjustable WrenChes
>
>
>
Product #
J704S
J706S
J708S
J710S
J712S
J715S
J718S
J724S
Max Opening Overall
(in)
1/2
4
0.17
15/16
6
0.28
1-1/8
8
0.58
1-5/16
10
0.90
1-1/2
12
1.58
1-11/16
15
3.00
2-1/16
18
4.26
2-7/16
24
6.41
ASME B107.100
656
FaCom® insulateD aDjustable WrenChes
>
>
>
Finger stops help keep hands safe.
orange to yellow if insulation integrity is compromised.
Graduated head, 15° angle.
Burnished finish.
Thumbwheel rotates counterclockwise.
Product #
FA-113.8TAVSE
FA-113.10TAVSE
FA-113.12TAVSE
FA-113.15TAVSE
Max Opening
(in)
1-1/16
1-3/16
1-11/32
1-47/64
Wrenches
>
>
Overall
8-15/32
0.83
10-7/16
1.37
12-19/32
1.93
15-9/16
3.12
blaCk oxiDe sPuD hanDle aDjustable WrenCh
>
>
>
Product #
J712SC
adjustable
>
>
Non-Reflective black oxide finish for use
where none plated products are required.
Large jaw opening fits all nuts and
bolts up to 1-1/2 inches.
Eliminates the need for carrying
several fixed size wrenches.
Hardened taper handle aligns bolt and rivet holes.
(in)
(in)
Weight (lbs)
1-1/2
16-3/32
2.45
FaCom® satin monkeY WrenChes
>
>
>
>
Sturdy, wide-opening tools for heavy-duty
work on farms and building sites.
Fixed jaw/handle and worm gear
made from hardened steel.
Smooth jaw faces help prevent
marring of fastener surfaces.
Product #
FA-105.230
FA-105.280
FA-105.375
Max Opening (in)
2-3/8
2-3/4
3-1/8
Jaw Depth (in)
1-25/32
1-11/32
1-25/32
Jaw Thickness (in)
25/32
21/32
7/8
Made in USA
Height (in)
19/32
25/32
7/8
Overall Length (in)
9-1/16
11-1/32
14-23/32
Weight (lbs)
1.15
1.79
3.36
657
Proto-griP™ Cast iron PiPe WrenChes
Wrenches
>
>
>
>
>
>
>
>
Gripping jaw teeth and spring-loaded hook jaw;
allow one-hand operation or hands free option
along with a ratcheting action for job speed.
Standard handle lengths with wide gripping
surface for increased comfort on all jobs.
Forged steel jaw provides outstanding strength.
Heel Jaw designed to work in both directions.
Spring hook jaw provides a ratcheting function
making threaded pipe fitting efficient.
Hanging hole for storage.
Field repairable by removing the rivet pin
located on the bottom side of the jaw.
Replacement parts available.
pipe
Product #
J810PG
J814PG
Overall
10
1.98
14
3.64
aluminum PiPe WrenChes
>
>
>
>
>
>
>
>
>
Light weight aluminum for less job fatigue.
Standard handle lengths with wide gripping surface for increased comfort and one-hand operation.
Large knurl and power threads provide fast, positive jaw adjustment.
Graduation markings on hook jaw show approximate opening for pipe sizes.
Riveted jaw pin for safety.
Hanging hole for storage.
Field repairable by removing the rivet pin located on the bottom side of the jaw.
Replacement parts available.
Product #
J810A
J812A
J814A
J818A
J824A
J836A
J848A
658
Max Opening
(in)
1-1/2
2
(in)
(in)
Weight (lbs)
1-1/2
10
1.10
2
12
1.72
2
14
2.15
3-1/2
18
3.60
4
24
5.65
5
36
10.60
6
48
17.00
heavY-DutY Cast iron PiPe WrenChes
Full floating hook jaw, provides instant grip, easy release.
Large knurl and power threads provide
fast, positive jaw adjustment.
Product #
J806HD
J808HD
J810HD
J812HD
J814HD
J818HD
J824HD
J836HD
J848HD
J860HD
Wrenches
>
>
>
Max Opening Overall
(in)
3/4
6
0.45
1
8
0.80
1-1/2
10
1.76
2
12
2.66
2
14
3.76
3-1/2
18
5.82
4
24
9.58
5
36
19.32
6
48
35.36
8
60
41.40
pipe
PiPe WrenCh rePlaCement Parts
>
Replacement parts for heavy-duty pipe wrenches.
Parts For
J806HD
J808HD
J810HD
J812HD
J814HD
J818HD
J824HD
J836HD
J848HD
J860HD
Handle, Heel Jaw,
and Pin Assemble
J806H
J808H
J810H
J812H
J814H
J818H
J824H
J836H
–
–
Weight
(lbs)
0.33
0.61
1.20
1.97
2.79
4.09
7.35
14.40
–
–
Parts For
J810PG
J814PG
Hook Jaw Weight (lbs)
J810PGB
0.60
J814PGB
0.84
Hook Jaw
J806B
J808B
J810B
J812B
J814B
J818B
J824B
J836B
J848B
J860B
Heel Jaw
J810PGC
J814PGC
Weight
(lbs)
0.11
0.23
0.45
0.68
0.97
1.57
2.36
4.37
7.31
12.50
Weight (lbs)
0.31
0.29
Made in USA
Heel Jaw
and Pin
J806C
J808C
J810C
J812C
J814C
J818C
J824C
J836C
J848C
J860C
Weight
(lbs)
0.02
0.04
0.08
0.15
0.15
0.23
0.32
0.58
0.72
1.50
Pin
J810PGD
J814PGD
Knurl
J806D
J808D
J810D
J812D
J814D
J818D
J824D
J836D
J848D
J860D
Weight Coil and Weight
(lbs) Flat Spring (lbs)
0.03
J806E
0.01
0.03
J808E
0.01
0.07
J810E
0.01
0.09
J812E
0.02
0.11
J814E
0.03
0.18
J818E
0.04
0.31
J824E
0.06
0.47
J836E
0.07
0.68
J848E
0.11
0.85
J860E
0.08
Weight (lbs)
0.04
0.08
Spring Weight (lbs)
J810PGE
0.01
J814PGE
0.01
659
4 PieCe internal PiPe WrenCh set
Wrenches
Product #: J140SET
>
>
>
>
>
>
Ideal for removing broken threaded
pipe ends, plugs, and fittings.
Installation and removal without thread damage.
Eccentric cam action engages wrench
against the walls of the pipe.
Hex body allows for use of adjustable
wrench for added torque.
Made from hardened steel and plated to help prevent rust.
Weight (lbs): 1.95
Contents
J140-38
J140-34
J140-12
J140-1
Size (in)
3/8
3/4
1/2
1
Overall Length (in)
3
3
3
3
internal PiPe WrenChes
pipe
>
>
>
>
>
Ideal for removing broken threaded pipe
ends pipe plugs and fittings.
Installation and removal without thread damage.
Eccentric cam action engages wrench
against the walls of the pipe.
Hex body allows for use of adjustable wrench for added torque.
Made from hardened steel and plated to help prevent rust.
Product #
J140-38
J140-34
J140-12
J140-1
Size (in)
3/8
3/4
1/2
1
Overall Length
(in)
Weight (lbs)
3
0.21
3
0.49
3
0.32
3
0.85
universal Chain WrenCh
>
>
>
Fits any shape pipe.
Forged steel handle has deep milled teeth.
Chain capacity rating: 6,200 lbs.
Product #
J801
660
Capacity Overall Length
Range (in)
(in)
Weight (lbs)
7/8 to 4
16-1/2
2.33
universal Chain WrenCh rePair kit
Fits any shape pipe.
Chain capacity rating: 6,200 lbs.
Product #
J801RK
Overall Length (in)
6-1/5
Wrenches
>
>
Weight (lbs)
0.73
blaCk oxiDe aDjustable FaCe sPanner WrenChes
>
>
>
Precision machined pins provide engagement with
holes or slots on the face of a bearing or nut.
Used to tighten collars, lock nut rings and
seal/packing nuts on hydraulic cylinders.
Max Opening (in)
2
3
4
Pin Diameter (in)
3/16
1/4
5/16
Pin Length (in)
1/4
1/4
1/2
Overall Length (in)
6-3/8
8-1/4
10-3/8
Weight (lbs)
0.31
0.52
1.02
spanner
Product #
JC482
JC483
JC484
FaCom® satin FaCe sPanner - rounD Pin
>
>
>
Precision machined pins provide engagement
with round holes on the face of the nut.
Each double-ended, round interchangeable pin has
two diameters for a variety of applications.
Product #
FA-117.B
Max Opening Height
Overall Weight
(in)
(in) Length (in) (lbs)
4
1-25/32 9-3/4
1.45
Made in USA
661
FaCom® satin metriC Pin rePlaCements - rounD
Wrenches
Product #
FA-117.E1
FA-117.E2
FA-117.E3
FA-117.E4
Pin
Size (mm) Diameter (in)
2.5 - 4 3/32 & 5/32
6 - 8
1/4 & 5/16
3 - 5
1/8 & 3/16
7 - 9 9/32 & 11/32
Height Weight
(in)
(lbs)
19/32 0.03
19/32 0.05
19/32 0.03
19/32 0.06
FaCom® satin FaCe sPanner - square Pin
>
spanner
>
>
Precision machined square pins provide engagement
with square holes or slots on the face of the nut.
Interchangeable pins are easy to swap out.
Product #
FA-118A
Max Opening Height
Overall Weight
(in)
(in)
Length (in) (lbs)
4
1-25/32
9-3/4
1.41
FaCom® satin metriC Pin rePlaCements - square
Product #
FA-118.EC4
FA-118.EC5
FA-118.EC8
662
Size
(mm)
4
5
8
Pin
Diameter
(in)
5/32
6/32
10/32
Height
(in)
19/32
3/8
3/8
Weight
(lbs)
0.02
0.02
0.03
FaCom® metriC hingeD hook sPanner WrenChes
Size (mm)
15-35
35-50
50-80
80-120
120-180
Max Opening
(in)
1-1/2
1-31/32
3-5/32
4-23/32
7-3/32
Head
Thickness (in) (D)
13/64
15/64
5/16
23/64
7/16
Hook
Thickness (in)
1/8
5/32
13/64
7/32
19/64
Height (in)
5/16
7/16
7/16
15/32
15-15/16
Overall Length
(in)
Weight (lbs)
6-39/64
0.17
7-61/64
0.37
11-1/32
0.83
13-37/64
1.54
19-3/8
3.26
Wrenches
Product #
FA-125A.35
FA-125A.50
FA-125A.80
FA-125A.120
FA-125A.180
FaCom® heavY-DutY metriC
hook sPanner WrenChes
spanner
Product #
FA-119.3/8
FA-119.3/4
Hook
Thickness Overall
Size (mm)
(in)
Length (in)
120-224
3/8
24
220-324
3/4
26
Weight
(lbs)
6.96
13.01
aDjustable hook sPanner WrenChes
>
>
Use to tighten side slot nuts on
collars, lock nuts and bearings.
Product #
JC471
JC472
JC474
JC474A
JC474B
Capacity Range
3/4 to 2
1-1/4 to 3
2 to 4-3/4
4-1/2 to 6-1/4
6-1/8 to 8-3/4
Hook Thickness (in)
11/32
13/32
15/32
15/32
15/32
Made in USA
Hook Depth (in)
1/8
5/32
3/16
1/4
5/16
Overall Length (in)
6-3/8
8-1/8
11-3/8
12-1/8
13-3/4
Weight (lbs)
0.23
0.43
1.03
1.07
1.40
663
FaCom® aDjustable heavY-DutY hook WrenChes
Wrenches
>
>
>
anda slip-resistant grip.
Hook design is used to tighten side slots
on collars, lock nuts and bearings.
Worm gear design allows for precision adjustments.
Product #
FA-115A.50
FA-115A.100
FA-115A.200
Size (in)
1
3
7
Max Opening (in)
1-31/32
3-15/16
7-7/8
Height (in)
31/32
25/32
25/32
Overall Length (in)
20-7/8
8-15/32
14-3/8
Weight (lbs)
0.83
1.96
4.57
aDjustable Pin sPanner WrenChes
>
>
spanner
>
Precision machined pins provide
engagement with side holes or slots.
Used to tighten side slot nuts on
collars, lock nuts and bearings.
Product #
JC491
JC492
JC494
JC495
JC497
JC499
Capacity Range
3/4 to 2
3/4 to 2
1-1/4 to 3
1-1/4 to 3
2 to 4-3/4
4-1/2 to 6-1/4
Pin Diameter (in)
1/8
3/16
3/16
1/4
1/4
3/8
Pin Length (in)
1/8
5/32
3/16
7/32
1/4
1/4
Hook Thickness (in)
11/32
11/32
13/32
13/32
15/32
15/32
6-3/8
0.23
6-3/8
0.23
8-1/8
0.42
8-1/8
0.42
11-3/8
0.99
12-1/8
1.08
FaCom® PreCision aDjustable Pin sPanner WrenChes
>
>
>
>
Sliding jaw moves easily along the shank and is
designed to be self-locking on to the nut.
with holes on the sides of collars and nuts.
Product #
FA-116.50
FA-116.100
FA-116.200
664
Size (in)
1
3
7
Max Opening (in)
1-31/32
3-15/16
7-7/8
Height (in)
31/32
31/32
1-3/16
Overall Length (in)
8-15/32
14-1/4
20-3/4
Weight (lbs)
0.86
1.99
4.76
FaCom® Pin rePlaCements For Fa-116 series
>
>
Product #
FA-116.50E1
FA-116.50E2
FA-116.100E1
FA-116.100E2
FA-116.200E1
FA-116.200E2
Pin
Diameter
(in)
3/32
5/32
5/32
1/4
1/4
5/16
Height
(in)
3/8
3/8
19/32
19/32
19/32
19/32
Overall
Length Weight
(in)
(lbs)
25/32 0.01
25/32 0.01
31/32 0.03
31/32 0.03
1-3/16 0.08
1-3/16 0.08
Wrenches
>
Replacement pins for Facom® FA-116.50,
FA-116.100 and FA-116.200 Precision
Adjustable Pin Spanner Wrenches.
with holes on the sides of collars and nuts.
FaCom® metriC hingeD Pin sPanner WrenChes
Size (mm) Max Opening (in) Pin Diameter (in) Hook Thickness (in) Height (in) Overall Length (in) Weight (lbs)
15-35
1-2/4
1/8
25/64
19/32
6-39/64
0.17
35-50
1-31/32
5/32
15/32
15/32
7-61/64
0.37
50-80
3-5/32
13/64
35/64
15/32
11-1/32
0.79
80-120
4-23/32
15/64
45/64
21/32
13-37/64
1.54
120-180
7-3/32
5/16
25/32
23/32
19-3/8
3.17
spanner
Product #
FA-126A.35
FA-126A.50
FA-126A.80
FA-126A.120
FA-126A.180
FaCom® Pin rePlaCements For Fa-126a series
>
>
Replacement pins for Facom® FA-126A.35,
FA-126A.50, FA-126A.80, FA-126A.120 and FA-126A
180 Hinged Pin Spanner Wrenches.
Product #
FA-126.E35
FA-126.E50
FA-126.E80
FA-126.E120
FA-126.E180
Pin
Diameter (in) Height (in) Weight (lbs)
4/32
3/8
0.01
5/32
3/8
0.01
6/32
3/8
0.01
8/32
19/32
0.04
10/32
25/32
0.07
Made in USA
665

Wrench - Proto

Transcription

Similar documents

Porteous Fastener Company is pleased to announce

SAT., JUNE 20, 2015 • 10 AM - Wilson Real Estate and Auction

TOOLS TECHNOLOGY AND EQUIPMENT, SA DE CV

is proud to present the Ductmate Industries proudly presents the

Softub T-220 - Softub of the Carolinas

BosScrew - Shakeproof

K9 SUPERFUEL TM Human Grade Ingredients

ShoreStation Installation Guide * DANGER

Softub T-140 - Softub of the Carolinas

VFX-9/13 Pneumatic Combination Tool for Polypropylene