Helios - Full Line Catalog

Transcription

1
Calipers,
Special Calipers
Special Caliper According to Drawings
Example 1
Special productions
For the solution of special
measuring tasks.
Based on your sketch or drawing,
or a part to be measured you have
sent to us, we prepare a dimensioned drawing with all details
required.
Example 2
Offer and delivery time
at expenditure
Production
in our factory.
Examples
The following examples show
only a selection of special
productions, which have been
already realised for customers
up to this date.
Example 1
For measurement of snap ringgrooves distances in small bores.
Example 2
With wide measuring surfaces for
measurement of steel cords and
soft materials.
Example 3
For measurement of diameters
of internal grooves.
Example 4
Depth digital for mounting e.g.
on fixtures.
Example 3
Example 4
Example 5
Example 5
For measurement of distances
of bore distances, recesses etc.
Example 6
With traverse measuring pins
for measurement of plane
recesses.
Example 6
Example 7
With a measuring taper
for measurement from the
bore center to the outer
edge of the workpiece.
Example 8
For measurement of outside
recesses. The width of the
measuring surfaces can be
adapted acc. to your
specifications.
Example 7
Example 8
Calipers,
Special Calipers
1
1
Calipers,
Special Calipers
Example 9
Example 9
For measurement of distances
in bores up to the outer edge
of the workpiece.
Example 10
With cylindrical measuring
inserts for internal and
external measurements
of recesses, grooves and
bores.
Example 10
Example 11
With movable depth stop for
out of center measurements
in large bores.
The length of the depth stop
can be individually selected.
Example 11
Example 12
Example 12
With spring pressure
for measurement of
bore depths up to
500 mm.
Measuring plate as desired.
Example 13
With face sided movable
measuring jaws for
measurement in different
levels.
We solve your measuring problem!
Please send us your scetch
or drawings with measures or
the workpiece to be measured.
Example 13
Calipers,
Special Calipers
1
1
Calipers,
Special Calipers
Pocket Caliper, Digital, DIN 862 in
Lightweight Design
HELIO - POINT
Aluminium main body and slide
Sliding surface with hard anodized
surface coating (1100 HV)
Perfect and continous travel
because of V-block guide
and special gliding material
Inductive measuring system
Measuring surfaces stainless steel,
precision-ground, hardness 60
HRC
Cross tips, locking screw
Round depth rod Ø 1.6 mm
Functions:
0/On: On/Off, zero setting
SET: Switching mm/inch
HOLD: Hold measuring value
SEND: Data transfer
-
V-guide
-
Delivery:
In wooden case
Incl. battery type CR2032
-
Accessories:
(optional extras):
Interface cable Opto RS232C (2 m)
Calibration certificate
Hard material coating of the
measuring surfaces (3000 HV)
-
With data output
Ref.No.
21001051
21007011
Measuring range
mm
0-150
0-200
Measuring range
inch
0-6
0-8
Measuring jaws
mm
40
40
Measuring jaws
inch
1,57
1,57
Reading
mm
0,01
0,01
Reading
inch
.0005
.0005
Net weight
g
120
130
Weight of case
g
220
250
Calibration certif.
Ref.No.
71610101
71610102
Calipers,
Special Calipers
Lightweight Design
HELIO - POINT
Sliding surface with hard anodized
surface coating (1100 HV)
because of V-block guide
and special gliding material
HRC
Cross tips, locking screw
Functions:
-
V-guide
-
Delivery:
- In wooden case
- Incl. battery type CR2032
Accessories:
(optional extras):
Hard material coating of the
measuring surfaces (3000 HV)
-
Without data output
Ref.No.
21001050
21007010
Measuring range
mm
0-150
0-200
Measuring range
inch
0-6
0-8
Measuring jaws
mm
40
40
Measuring jaws
inch
1,57
1,57
Reading
mm
0,01
0,01
Reading
inch
.0005
.0005
Net weight
g
120
130
Weight of case
g
220
250
Calibration certif.
Ref.No.
71610101
71610102
1
1
Calipers,
Special Calipers
Pocket Caliper, Digital, DIN 862 , System
of Protection IP 65
HELIOS IP 65
Splash-proof protected
With data output
Measuring surfaces precisionground
Cross tips
Locking screw
Functions:
SEND: Data transfer
-
Delivery:
- In wooden case
Accessories:
(optional extras):
Tungsten carbide coating
of the measuring surfaces
Ref.No. 21900007
-
Protection IP 65
Ref.No.
21001040
Measuring range
mm
0-150
Measuring range
inch
0-6
Measuring jaws
mm
40
Measuring jaws
inch
1,57
Reading
mm
0,01
Reading
inch
.0005
Weight
g
380
Calibration certif.
Ref.No.
71610101
Calipers,
Special Calipers
Pocket Caliper, Digital, DIN 862
HELIO - RED
Stainless steel, hardened
Cross tips
Locking screw
Functions:
Digit height 6 mm
-
Delivery:
- In wooden case
Ref.No. 23004004
Accessories:
(optional extras):
Tungsten-carbide coating of the
measuring surfaces
Ref.No. 21900007
Depth stop 75 x 7 mm
Ref.No. 21001007
-
Ref.No.
21001043
Measuring range
mm
0-150
Measuring range
inch
0-6
Measuring jaws
mm
40
Measuring jaws
inch
1,57
Reading
mm
0,01
Reading
inch
.0005
Weight
g
380
Calibration certif.
Ref.No.
71610101
1
1
Calipers,
Special Calipers
HELIO - BLACK
with Titanium-Ceramic coating
(3000 HV)
With data output
Cross tips
Locking screw
Functions:
SEND: Data transfer
Digit height 6 mm
-
Delivery:
In wooden case
Ref.No. 23004004
-
Accessories:
(optional extras):
Ref.No. 21901067
Ref.No. 21001007
-
Ref.No.
21001041
Measuring range
mm
0-150
Measuring range
inch
0-6
Measuring jaws
mm
40
Measuring jaws
inch
1,57
Reading
mm
0,01
Reading
inch
.0005
Weight
g
380
Calibration certif.
Ref.No.
71610101
Calipers,
Special Calipers
HELIO - SILVER
With data output
Locking screw
Depth rod:
MR 0-150 round Ø 1.6 mm,
MR 0-200 angular
Functions:
SEND: Data transfer
-
40 mm cross
tips
-
Delivery:
In wooden case
-
Accessories:
(optional extras):
Ref.No. 21901067
Ref.No. 21001007
-
Cross tips
Ref.No.
21001042
21007045
Measuring range
mm
0-150
0-200
Measuring range
inch
0-6
0-8
Measuring jaws
mm
40
40
Measuring jaws
inch
1,57
1,57
Reading
mm
0,01
0,01
Reading
inch
.0005
.0005
Weight
g
370
460
Calibration certif.
Ref.No.
71610101
71610102
Reading
mm
0,01
Reading
inch
.0005
Weight
g
390
Calibration certif.
Ref.No.
71610101
Long cross tips
Ref.No.
21001044
Measuring range
mm
0-150
Measuring range
inch
0-6
Measuring jaws
mm
40
Measuring jaws
inch
1,57
1
1
Calipers,
Special Calipers
Calipers,
Special Calipers
Radio Data Transfer - Set
Complete system
Ref.No. 21907080
Cable-free data transfer
from caliper to the PC,
consisting of:
1 Receiver with
interface RS232C
1 Transmitter with
interface RS232C
1 RS232C cable
1 Power supply unit
-
Transmitter
-
Advantages
No cable installed between
measuring device and interface,
the transmitter is fixed on the
measuring device
No external antenna on the
transmitter
Horn and LED for
confirmation of the receipt
in the receiver
-
Distance of transmitting
- Minimum 10 m in closed
rooms with sight contact
Accessories
(optional extras):
Software OptoFace for
acquisition of measuring data
Ref.No. 21908083
(see next page)
-
Receiver
1
1
Calipers,
Special Calipers
Software OptoFace
OptoFace full version
(German/English)
Ref.No. 21908083
Allows the direct entry of
measuring values from
measuring instruments with
Opto RS232-connection
into standard Windows
applications like MS-Excel
or MS-Access.
Connection
Connect the measuring instrument
directly to the serial interface of
the PC.
The data transmission is activated
by the Data or the Print key of the
respective measuring instrument.
OptoFace runs in the background
and does not affect other
applications.
Screen view
System requirements
IBM AT compatible PC
MS Windows 3.1 and higher
versions / Windows 95
Free interruptable COM interface
for connection of the measuring
instrument.
-
Accessories
(optional extras):
Ref.No. 21901067
Foot switch for release of
measuring values
Ref.No. 21906010
AT adaptor serial, plug 9 poles/
socket 25 poles Sub D
Ref.No. 21901056
-
Interface cable Opto RS232C
Calipers,
Special Calipers
Dial Caliper DIN 862
DURA
With cross tips or
extra long cross tips
(length 40 mm, width 6.8 mm)
Locking screw
Adjustable dial, 10 mm measuring
distance = 1 turn of the pointer
Angular depth rod
-
40 mm cross
tips
-
Delivery
- Ref.No. 21026001 in case
- Ref.No. 21026002 in wooden case
Accessories
(optional extras):
Wo o d e n c a s e ( f o r R e f . N o .
21026001)
Ref.No. 21912352
Tungsten-carbide coating
Ref.No. 21900007
Ref.No. 21001007
-
Cross tips
Ref.No.
21026001
Measuring range
mm
0-150
Measuring jaws
mm
40
Reading
mm
0,05
Weight
g
190
Calibration certif.
Ref.No.
71610101
Reading
mm
0,05
Weight
g
420
Calibration certif.
Ref.No.
71610101
Long cross tips
Ref.No.
21026002
Measuring range
mm
0-150
Measuring jaws
mm
40
1
1
Calipers,
Special Calipers
With shock-protected dial gauge
Measuring surfaces
precision-ground
Thumb roller
Cross tips
Locking screw
Angular depth rod
-
Delivery
- in case
Accessories
(optional extras):
Ref.No. 21900007
-
Ref.No.
21024007
21024009
Measuring range
mm
0-150
0-150
Measuring jaws
mm
40
40
Reading
mm
0,02
0,01
Weight
g
220
220
Calibration certif.
Ref.No.
71610101
71610101
Calipers,
Special Calipers
Pocket Caliper DIN 862
STUDENT
With locking device or
with locking screw
Angular depth rod
Measuring surfaces
precision-ground
Reading parts dull-chromed
-
Delivery
in case
-
Accessories
(optional extras):
Wooden case
Ref.No. 21912352
Ref.No. 21900007
Ref.No. 21001007
-
Locking device
Ref.No.
21021002
Measuring range
mm
0-150
Measuring range
inch
0-6
Measuring jaws
mm
40
Measuring jaws
inch
1,57
Reading
mm
0,05
Reading
inch
.008
Weight
g
190
Calibration certif.
Ref.No.
71610101
Reading
mm
0,05
0,05
Reading
inch
.008
.008
Weight
g
190
220
Calibration certif.
Ref.No.
71610101
71610102
Locking screw
Ref.No.
21022002
21022010
Measuring range
mm
0-150
0-200
Measuring range
inch
0-6
0-8
Measuring jaws
mm
40
50
Measuring jaws
inch
1,57
1,57
1
1
Calipers,
Special Calipers
MASTER
with locking screw
Measuring surfaces
precision-ground
-
Delivery
- in case
Accessories
(optional extras):
Wooden case
Ref.No. 21912352
Ref.No. 21900007
Ref.No. 21001007
-
Locking device
Ref.No.
21142001
Measuring range
mm
0-150
Measuring range
inch
0-6
Measuring jaws
mm
40
Measuring jaws
inch
1,57
Reading
mm
0,05
Reading
inch
.008
Weight
g
190
Calibration certif.
Ref.No.
71610101
Reading
mm
0,05
Reading
inch
.008
Weight
g
190
Calibration certif.
Ref.No.
71610101
Locking screw
Ref.No.
21143001
Measuring range
mm
0-150
Measuring range
inch
0-6
Measuring jaws
mm
40
Measuring jaws
inch
1,57
Calipers,
Special Calipers
RECORD
Parallax-free reading
with locking screw
Angular depth rod
Measuring surfaces
precision-ground
-
Delivery
in case
-
Accessories
(optional extras):
Wooden case
Ref.No. 21912352
Ref.No. 21900007
Ref.No. 21001007
-
Locking device
Ref.No.
21019006
Measuring range
mm
0-150
Measuring range
inch
0-6
Measuring jaws
mm
40
Measuring jaws
inch
1,57
Reading
mm
0,05
Reading
inch
.008
Weight
g
290
Calibration certif.
Ref.No.
71610101
Reading
mm
0,05
Reading
inch
.008
Weight
g
290
Calibration certif.
Ref.No.
71610101
Locking screw
Ref.No.
21020007
Measuring range
mm
0-150
Measuring range
inch
0-6
Measuring jaws
mm
40
Measuring jaws
inch
1,57
1
1
Calipers,
Special Calipers
Workshop Caliper, Digital, in
Lightweight Design
Ref. No. 21003051
HELIO - POINT
Sliding surface with hard anodized surface coating (1100 HV)
300 mm with data output, from
500 mm with Preset function
HRC
Blade tips, locking screw
Functions:
SEND: Data transfer
-
Ref. No. 21002011
-
V-block guide
Delivery:
- In wooden case incl. battery
Accessories (optional extras):
-
Without fine adjustment
Ref.No.
21002011
21003051
21003151
21003081
Measuring range
mm
0-300
0-500
0-800
0-1000
Measuring range
inch
0-12
0-20
0-32
0-40
Measuring jaws
mm/inch
90/3,5
150/6
150/6
150/6
Reading
mm/inch
0,01/.0005
0,01/.0005
0,01/.0005
0,01/.0005
Jaw tips for ins.ms
mm
10
20
20
20
Error limits
lm
30
30
70
80
Net weight
g
460
1200
1500
1650
Weight of case
g
640
2000
3060
4350
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
Calipers,
Special Calipers
Workshop Caliper, Digital, in
Lightweight Design
Ref. No. 21003056
HELIO - POINT
300 mm with data output, from
500 mm with Preset function
HRC
Blade tips, locking screw
Functions:
SEND: Data transfer
-
Ref. No. 21002002
-
V-block guide
Delivery:
In wooden case incl. battery
-
Accessories (optional extras):
- Interface cable Opto RS232C (2 m)
- Calibration certificate
With fine adjustment
Ref.No.
21002002
21003056
21003156
21003086
Measuring range
mm
0-300
0-500
0-800
0-1000
Measuring range
inch
0-12
0-20
0-32
0-40
Measuring jaws
mm/inch
90/3,5
150/6
150/6
150/6
Reading
mm/inch
0,01/.0005
0,01/.0005
0,01/.0005
0,01/.0005
Jaw tips for ins.ms
mm
10
20
20
20
Error limits
lm
30
30
70
80
Net weight
g
460
1200
1500
1650
Weight of case
g
640
2000
3060
4350
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
1
1
Calipers,
Special Calipers
Workshop Caliper, Digital, DIN 862
With blade tips
Data output
Measuring surfaces
precision-ground
Locking screw
Functions:
SEND: Data transfer
Digit height 6 mm
-
Delivery:
In wooden case
Ref.No. 23004004
-
Accessories:
(optional extras):
Ref.No. 21901067
-
Ref.No.
21205010
21205011
21205012
21205013
Measuring range
mm
0-300
0-500
0-800
0-1000
Measuring range
inch
0-12
0-20
0-32
0-40
Measuring jaws
mm
90
150
150
150
Measuring jaws
inch
3,5
6
6
6
Reading
mm
0,01
0,01
0,01
0,01
Reading
inch
.0005
.0005
.0005
.0005
Jaw tips for ins.ms
mm
10
20
20
20
Weight
g
1200
2560
4480
4900
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
Calipers,
Special Calipers
With blade tips
Data output
Measuring surfaces
precision-ground
Fine adjustment
Locking screw
Functions:
SEND: Data transfer
Digit height 6 mm
-
Delivery:
- In wooden case
Accessories:
(optional extras):
Ref.No. 21901067
-
Ref.No.
21206010
21206011
21206012
21206013
Measuring range
mm
0-300
0-500
0-800
0-1000
Measuring range
inch
0-12
0-20
0-32
0-40
Measuring jaws
mm
90
150
150
150
Measuring jaws
inch
3,5
6
6
6
Reading
mm
0,01
0,01
0,01
0,01
Reading
inch
.0005
.0005
.0005
.0005
Jaw tips for ins.ms
mm
10
20
20
20
Weight
g
1200
2560
4480
4900
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
1
1
Calipers,
Special Calipers
With cross tips (21 mm)
Data output
Measuring surfaces
precision-ground
Fine adjustment
Locking screw
Functions:
SEND: Data transfer
Digit height 6 mm
-
Delivery:
In wooden case
Ref.No. 23004004
-
Accessories:
(optional extras):
Ref.No. 21901040
-
Cross tips
Ref.No.
21272002
Measuring range
mm
0-300
Measuring range
inch
0-12
Measuring jaws
mm
90
Measuring jaws
inch
3,5
Reading
mm
0,01
Reading
inch
.0005
Jaw tips for ins.ms
mm
10
Weight
g
1280
Calibration certif.
Ref.No.
71610102
Calipers,
Special Calipers
Without blade tips
Data output
Measuring surfaces
precision-ground
Locking screw
Functions:
SEND: Data transfer
Digit height 6 mm
-
Delivery:
In wooden case
Ref.No. 23004004
-
Accessories:
(optional extras):
Ref.No. 21901040
-
Ref.No.
21203010
21203011
21203012
21203013
Measuring range
mm
0-300
0-500
0-800
0-1000
Measuring range
inch
0-12
0-20
0-32
0-40
Measuring jaws
mm
90
150
150
150
Measuring jaws
inch
3,5
6
6
6
Reading
mm
0,01
0,01
0,01
0,01
Reading
inch
.0005
.0005
.0005
.0005
Jaw tips for ins.ms
mm
10
20
20
20
Weight
g
1280
2140
4700
4880
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
1
1
Calipers,
Special Calipers
Without blade tips
Data output
Measuring surfaces
precision-ground
Fine adjustment
Locking screw
Functions:
SEND: Data transfer
Digit height 6 mm
-
Delivery:
- In wooden case
Ref.No. 23004004
Accessories:
(optional extras):
Ref.No. 21901040
-
Ref.No.
21204010
21204011
21204012
21204013
Measuring range
mm
0-300
0-500
0-800
0-1000
Measuring range
inch
0-12
0-20
0-32
0-40
Measuring jaws
mm
90
150
150
150
Measuring jaws
inch
3,5
6
6
6
Reading
mm
0,01
0,01
0,01
0,01
Reading
inch
.0005
.0005
.0005
.0005
Jaw tips for ins.ms
mm
10
20
20
20
Weight
g
1280
2140
4700
4880
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
Calipers,
Special Calipers
Workshop Dial Caliper DIN 862
DURA
Measuring surfaces
precision-ground
Blade tips or
Locking screw
Thumb roller
Angular depth rod
-
Delivery
- In wooden case
Accessories
(optional extras):
Ref.No. 21900007
-
Ref.No.
21027003
Measuring range
mm
0-300
Measuring jaws
mm
90
Reading
mm
0,05
Jaw tips for ins.ms
mm
10
Weight
g
1300
Calibration certif.
Ref.No.
71610101
1
1
Calipers,
Special Calipers
Workshop Caliper Lightweight Design
Ref. No. 21044200
HELIO - SLITE
because of V-block guide and
special gliding material
Measuring surfaces stainless
steel, precision-ground,
hardness 53 HRC
Blade tips
Locking screw
Direct read-off at the vernier
at internal and external
measurements
-
Ref. No. 21043010
V-block guide
Delivery:
In wooden case
-
Accessories:
(optional extras):
Inch version
-
Ref.No.
21043010
21044200
21044400
21044480
Measuring range
mm
0-300
0-500
0-800
0-1000
Measuring jaws
mm
90
150
150
150
Reading
mm
0,02
0,02
0,02
0,02
Jaw tips for ins.ms
mm
10
20
20
20
Error limits
lm
30
30
70
80
Net weight
g
500
1400
1600
1800
Weight of case
g
680
1800
3000
4200
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
Calipers,
Special Calipers
Workshop Caliper in Lightweight
Design
Ref. No. 21044205
HELIO - SLITE
Measuring surfaces stainless
steel, precision-ground,
hardness 53 HRC
Fine adjustment
Blade tips
Locking screw
Direct read-off at the vernier
at internal and external
measurements
-
Ref. No. 21043001
V-block guide
Delivery:
- In wooden case
Accessories:
(optional extras):
Inch version
-
Ref.No.
21043001
21044205
21044405
21044485
Measuring range
mm
0-300
0-500
0-800
0-1000
Measuring jaws
mm
90
150
150
150
Reading
mm
0,02
0,02
0,02
0,02
Jaw tips for ins.ms
mm
10
20
20
20
Error limits
lm
30
30
70
80
Net weight
g
500
1400
1600
1800
Weight of case
g
680
1800
3000
4200
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
1
1
Calipers,
Special Calipers
Workshop Caliper DIN 862
With blade tips
with and without fine
adjustment
stainless steel
Vernier and scale
dull-chromed
Measuring surfaces
precision-ground
-
Delivery
- In wooden case
Accessories
(optional extras):
Ref.No. 219000..
-
Ref.No.
21042025
21042026
21042027
21042028
21042030
Measuring range
mm
0-300
0-500
0-800
0-1000
0-1500
Measuring range
inch
0-12
-
Measuring jaws
mm
90
150
150
150
200
Measuring jaws
inch
3.5
-
Reading
mm
0,05
0,05
0,05
0,05
0,05
Reading
inch
.008
-
Jaw tips for ins.ms
mm
10
20
20
20
30
Weight
g
1300
2430
4250
4500
13100
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
71610105
Reading
inch
.008
-
Jaw tips for ins.ms
mm
10
20
20
20
30
Weight
g
1300
2430
4250
4500
13100
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
71610105
Ref.No.
21047030
21047031
21047032
21047033
21047035
Measuring range
mm
0-300
0-500
0-800
0-1000
0-1500
Measuring range
inch
0-12
-
Measuring jaws
mm
90
150
150
150
200
Measuring jaws
inch
3.5
-
Reading
mm
0,05
0,05
0,05
0,05
0,05
Calipers,
Special Calipers
Without blade tips
With and without
fine adjustment
Stainless steel
Vernier and scale
dull-chromed
Measuring surfaces
precision-ground
-
Delivery
- In wooden case
Accessories
(optional extras):
Ref.No. 219000..
-
Ref.No.
21032030
21032031
21032032
21032033
21032035
Measuring range
mm
0-300
0-500
0-800
0-1000
0-1500
Measuring range
inch
0-12
-
Measuring jaws
mm
90
150
150
150
200
Measuring jaws
inch
3.5
-
Reading
mm
0,05
0,05
0,05
0,05
0,05
Reading
inch
.008
-
Jaw tips for ins.ms
mm
10
20
20
20
30
Weight
g
1260
2100
3900
4600
11200
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
71610105
Reading
inch
.008
-
Jaw tips for ins.ms
mm
10
20
20
20
30
Weight
g
1260
2100
3900
4600
11200
Calibration certif.
Ref.No.
71610102
71610103
71610104
71610104
71610105
Ref.No.
21037050
21037051
21037052
21037053
21037055
Measuring range
mm
0-300
0-500
0-800
0-1000
0-1500
Measuring range
inch
0-12
-
Measuring jaws
mm
90
150
150
150
200
Measuring jaws
inch
3.5
-
Reading
mm
0,05
0,05
0,05
0,05
0,05
1
1
Calipers,
Special Calipers
With cross tips
Stable construction
Stainless steel
Produced of one part
Vernier and scale dull-chromed,
reading parts high precision
laser-engraved
Measuring surfaces
precision-ground and
lapped
Fine adjustment
Locking screw
Stop protection at end of beam
Cross section of measuring
beam 24x5 mm
-
Delivery
- In wooden case
Accessories
(optional extras):
Ref.No. 21900008
-
With cross tips
Ref.No.
21081002
Measuring range
mm
0-300
Measuring jaws
mm
90
Reading
mm
0,02
Jaw tips for ins.ms
mm
10
Weight
g
720
Calibration certif.
Ref.No.
71610102
Mounted Digital in Lightweight Design
Calipers,
Special Calipers
1
1
Calipers,
Special Calipers
,4,4,0}>HELIO - CLIP Horizontal
- Aluminium main body and slide
- Sliding surface with hard ano-
dized surface coating (1100 HV)
Functions:
+/-: Reversing of meas. direction
SEND: Data transfer
PRESET: Preselection of
measuring values
Field of application
- Measurement of travel distances
-
on machine tools
Setting of limit stops
Delivery:
Ref.No. 23004004
-
Accessories
(optional extras):
Ref.No. 21901067
-
Calipers,
Special Calipers
1
1
Calipers,
Special Calipers
Ref.No.
21013021
21013022
21013023
21013024
Measuring range
mm
0-150
0-300
0-450
0-600
Measuring range
inch
0-6
0-12
0-18
0-24
Reading
mm
0,01
0,01
0,01
0,01
Reading
inch
.0005
.0005
.0005
.0005
Repeatability
lm
10
10
10
10
Weight
g
220
280
360
380
Calibration certif.
Ref.No.
71694008
71694008
71694008
71694008
Calipers,
Special Calipers
HELIO - CLIP Vertical
Functions:
+/-: Reversing of meas. direction
SEND: Data transfer
measuring values
-
Field of application
Measurement of travel distances
on machine tools
Setting of limit stops
-
Delivery:
Ref.No. 23004004
Accessories
(optional extras):
Ref.No. 21901067
-
Ref.No.
21014021
21014022
21014023
21014024
Measuring range
mm
0-150
0-300
0-450
0-600
Measuring range
inch
0-6
0-12
0-18
0-24
Reading
mm
0,01
0,01
0,01
0,01
Reading
inch
.0005
.0005
.0005
.0005
Repeatability
lm
10
10
10
10
Weight
g
260
280
420
440
Calibration certif.
Ref.No.
71694008
71694008
71694008
71694008
1
1
Calipers,
Special Calipers
Calipers,
Special Calipers
Depth Caliper for One-Hand-Operation
One-hand
operation
HELIO - JET
For special measuring tasks,
e.g. blind hole root measurements.
V-block guide travel
Interchangeable inserts M 2.5
Meas. force by spring pressure
Locking screw, data output
Functions:
+/-: Reversing of meas.direction
SEND: Data transfer
-
Accessories
(optional extras):
Measuring bridge
110 mm, Ref.No. 21010015
200 mm, Ref.No. 21010016
Reduction
Øi=6/Øa=12 mm,
Ref.No. 21010012
Øi=9,5/Øa=16 mm,
Ref.No. 21010013
Øi=15/Øa=20 mm,
Ref.No. 21010014
Measuring inserts-Set (16 pcs.)
Ref.No. 21010017
-
-
For other interchangeable inserts
see last inner cover
Ref.No.
21010030
21010031
Measuring range
mm
0-60
0-100
Reading
mm
0,01
0,01
Reading
inch
.0005
.0005
Weight
g
260
280
Calibration certif.
Ref.No.
71610201
71610201
1
1
Calipers,
Special Calipers
Depth Caliper in Lightweight Design
HELIO - SUB
Aluminium body and slide
Interchangeable measuring
inserts M 2.5
Locking screw
Data output
Functions:
SEND: Data transfer
-
Delivery
- In wooden case
- Incl. two measuring inserts:
1. Meas.plate, height 1.0, Ø 7.0
mm
Ref.No. 41003817
2. Hard metal - measuring insert
spherical, height 5.0, Ø 4.8 mm
Ref. No. 23109101
Accessories
(optional extras):
-
For other interchangeable inserts
(max. plate Ø 7.0 mm)
Ref.No.
21010004
Measuring range
mm
0-150
Measuring range
inch
0-6
Reading
mm
0,01
Reading
inch
.0005
Depth stop length
mm
100
Weight
g
500
Calibration certif.
Ref.No.
71610201
Calipers,
Special Calipers
1
1
Calipers,
Special Calipers
Mini Depth Caliper
HELIO - SUB mini
Round depth rod Ø 2 mm
Locking screw
Data output
Functions:
SEND: Data transfer
-
Delivery
Ref.No. 23004004
-
Accessories
(optional extras):
Ref. No. 21901067
-
Ref.No.
21010005
Measuring range
mm
0-25
Measuring range
inch
0-1
Reading
mm
0,01
Reading
inch
.0005
Depth stop length
mm
48
Weight
g
90
Calibration certif.
Ref.No.
71610201
Calipers,
Special Calipers
Depth Digital DIN 862 - Standard/
Protection IP 65
Two digits
in one
A
A
-
R
C
-
D
With interchangeable meas. beam
Straight and L-shaped
Measuring surfaces
precision-ground
Functions:
SEND: Data transfer
B
B
C
Delivery
- In wooden case incl. battery
Accessories
(optional extras):
-
Standard
Ref.No.
21126011
21126010
21126014
Measuring range
mm/inch
0-200/0-8
0-300/0-12
0-500/0-20
Reading
mm/inch
0,01/.0005
0,01/.0005
0,01/.0005
Depth stop length
mm
100
150
150
Measure A
mm
12/12
12/12
12/12
Measure B
mm
3,5/3,5
3,5/3,5
3,5/3,5
Measure C
mm
4/10
4/10
4/10
Measure D
mm
-/28
-/28
-/28
Measure R
Degree
10/10/10/-
Weight
g
700
830
870
Calibration certif.
Ref.No.
71610201
71610201
71610202
Measure C
mm
4/10
4/10
4/10
Measure D
mm
-/28
-/28
-/28
Measure R
Degree
10/10/10/-
Weight
g
700
830
870
Calibration certif.
Ref.No.
71610201
71610201
71610202
Protection IP 65
Ref.No.
21126021
21126020
21126024
Measuring range
mm/inch
0-200/0-8
0-300/0-12
0-500/0-20
Reading
mm/inch
0,01/.0005
0,01/.0005
0,01/.0005
Depth stop length
mm
100
150
150
Measure A
mm
12/12
12/12
12/12
Measure B
mm
3,5/3,5
3,5/3,5
3,5/3,5
1
1
Calipers,
Special Calipers
Protection IP 65
Two digits
in one
A
D
C
-
B
A
-
R
C
With interchangeable measuring
beam
Straight and offset meas. surface
Measuring surfaces
precision-ground
Functions:
SEND: Data transfer
B
Delivery
In wooden case incl. battery
-
Accessories
(optional extras):
-
Standard
Ref.No.
21126013
21126012
Measuring range
mm/inch
0-200/0-8
0-300/0-12
Reading
mm/inch
0,01/.0005
0,01/.0005
Depth stop length
mm
100
150
Measure A
mm
12/12
12/12
Measure B
mm
3,5/3,5
3,5/3,5
Measure C
mm
4/6
4/6
Measure D
mm
-/4
-/4
Measure R
Degree
10/10/-
Weight
g
700
830
Calibration certif.
Ref.No.
71610201
71610201
Measure C
mm
4/6
4/6
Measure D
mm
-/4
-/4
Measure R
Degree
10/10/-
Weight
g
700
830
Calibration certif.
Ref.No.
71610201
71610201
Protection IP 65
Ref.No.
21126023
21126022
Measuring range
mm/inch
0-200/0-8
0-300/0-12
Reading
mm/inch
0,01/.0005
0,01/.0005
Depth stop length
mm
100
150
Measure A
mm
12/12
12/12
Measure B
mm
3,5/3,5
3,5/3,5
Calipers,
Special Calipers
Depth Caliper DIN 862
interchangeable
beam
Straight and L-shaped
measuring surface
Stainless steel
Locking screw
Vernier and scale
dull-chromed
Scale on both sides
Interchangeable, fully
hardened
beam
Depth stop induction,
hardened
Measuring surfaces
precision-ground
R
C
A
-
B
D
-
A
-
B
C
-
Delivery
In wooden case
-
Accessories
(optional extras):
-
Ref.No.
21119031
21119032
21119033
Measuring range
mm
0-200
0-300
0-300
Reading
mm
0,05
0,05
0,05
Depth stop length
mm
100
100
150
Measure A
mm
8/8
8/8
12/12
Measure B
mm
3/3
3/3
4/4
Measure C
mm
3/5
3/5
5/10
Measure D
mm
-/20
-/20
-/28
Measure R
Degree
10/10/10/-
Weight
g
660
970
1100
Calibration certif.
Ref.No.
71610201
71610201
71610201
1
1
Calipers,
Special Calipers
interchangeable
beam
Straight and offset
measuring surface
Stainless steel
Locking screw
Vernier and scale
dull-chromed
Scale on both sides
Interchangeable, fully
hardened measuring
beam
Depth stop induction,
hardened
Measuring surfaces
precision-ground
R
C
A
-
B
D
A
C
-
B
-
Delivery
- In wooden case
Accessories
(optional extras):
-
Ref.No.
21122015
21122016
Measuring range
mm
0-200
0-300
Reading
mm
0,05
0,05
Depth stop length
mm
100
100
Measure A
mm
8/8
8/8
Measure B
mm
3/3
3/3
Measure C
mm
3/5
3/5
Measure D
mm
-/4
-/4
Measure R
Degree
10/10/-
Weight
g
680
1000
Calibration certif.
Ref.No.
71610201
71610201
Calipers,
Special Calipers
Ref. No. 21112041
With straight measuring beam
Stainless steel
Locking screw
Vernier and scale
dull-chromed
Measuring surfaces
precision-ground
-
Delivery
Ref. No. 21112042
- In wooden case
R
C
A
Accessories
(optional extras):
-
Ref.No.
21112041
21112043
21112044
Measuring range
mm
0-200
0-300
0-500
Reading
mm
0,05
0,05
0,05
Depth stop length
mm
100
150
150
Measure A
mm
10
12
12
Measure B
mm
3,5
3,5
3,5
B
Measure C
mm
5,0
4,0
4,0
Measure R
Degree
10
10
Weight
g
680
1100
1300
Calibration certif.
Ref.No.
71610201
71610201
71610202
1
Calipers,
Special Calipers
-
A
With exchangeable measuring pin
Stainless steel
Locking screw
Vernier and scale
dull-chromed
Measuring surfaces
precision-ground
Measuring pin
hardened
øD
1
B
C
-
Delivery
- In wooden case
Accessories
(optional extras):
-
Ref.No.
21120024
21120020
21120021
Measuring range
mm
0-80
0-150
0-200
Reading
mm
0,05
0,05
0,05
Depth stop length
mm
50
100
100
Measure A
mm
10
8
10
Measure B
mm
3,5
3,0
3,5
Measure C
mm
6,0
6,0
6,0
ØD
mm
1,0
1,5
1,0
Weight
g
370
650
680
Calibration certif.
Ref.No.
71610201
71610201
71610201
Calipers,
Special Calipers
Internal and External Caliper in
Lightweight Design
Measuring inserts
exchangeable
HELIO - FIX
Ball measuring inserts Ø 4 mm
exchangeable for external
measurements
Fine adjustment
Beam measures 450x25x8 mm
Data output
Functions:
PRESET: Setting of the value
SEND: Data transfer
-
External measurement
Delivery
In wooden case
-
Accessories
(optional extras):
Ref.No. 21901067
Spare measuring inserts
12.5 x Ø 4 mm, Ref.No. 23104020
-
Special designs on request
Ref.No.
21012004
Measuring range
mm
35-260
Measuring range
inch
1,5-8
Measuring jaws
mm
70
Measuring jaws
inch
2,75
Reading
mm
0,01
Reading
inch
.0005
Error limits
lm
30
Weight
g
1250
Calibration certif.
Ref.No.
71610102
1
1
Calipers,
Special Calipers
Special Caliper DIN 862
For internal grooves
For measurement of bore
grooves for internal locking
rings.
Stainless steel
Reading parts
dull-chromed
Stop surfaces
hardened
Measuring surfaces
precision-ground
Locking screw
-
Delivery
- In wooden case
Accessories
(optional extras):
-
Ref.No.
21091003
21091004
Measuring range
mm
10-160
20-160
Measuring jaws
mm
25
40
Reading
mm
0,05
0,05
Measure of tips
mm
3,0x0,9
5,0x2,0
Weight
g
740
700
Calibration certif.
Ref.No.
71610101
71610101
Calipers,
Special Calipers
For outside recesses
For measurement of shaft
grooves for external locking
rings.
Stainless steel
Reading parts
dull-chromed
Blade tips
Measuring surfaces
precision-ground
Locking screw
-
End of jaws flattened
to 1.5 mm
Delivery
- In wooden case
Accessories
(optional extras):
Ref.No. 21900008
-
Ref.No.
21093003
Measuring range
mm
0-300
Measuring range
inch
0-12
Measuring jaws
mm
90
Measuring jaws
inch
3,5
Reading
mm
0,05
Reading
inch
.008
Weight
g
1000
Calibration certif.
Ref.No.
71610102
1
1
Calipers,
Special Calipers
For brake drums
Stainless steel
Measuring surfaces
precision-ground
Locking screw
-
Reading
Internal measurement: below
External measurement: above
-
Delivery
In wooden case
-
Accessories
(optional extras):
Spare tip
-
Ref.No.
21098005
21098006
21098007
Reading
mm
0,05
0,05
0,05
Intern. measurement
mm
40-300
50-500
50-600
Extern. measurement
mm
0-300
0-500
0-600
Rail length
mm
90
150
200
Length of tips
mm
8
5
5
Weight
g
1250
2150
2660
Spare tip
Ref.No.
21098101
21098102
21098102
Calibration certif.
Ref.No.
71610102
71610103
71610104
Calipers,
Special Calipers
Caliper for wall thicknesses
Stainless steel
Reading parts
dull-chromed
Measuring surfaces
precision-ground
Locking screw
-
Dimension
of round jaw Ø 3.0 mm
Delivery
In wooden case
-
Accessories
(optional extras):
-
Ref.No.
21098009
Measuring range
mm
0-160
Measuring range
inch
0-6
Measuring jaws
mm
40
Measuring jaws
inch
1,6
Reading
mm
0,05
Reading
inch
.008
Weight
g
140
Calibration certif.
Ref.No.
71610101
1
1
Calipers,
Special Calipers
Marking Caliper
With long marking rail
Reading parts
dull-chromed
Locking screw
Fine adjustment
-
Accessories
(optional extras):
Wooden case
-
Ref.No.
21089001
21089002
21089003
mm
71610103
Measuring range
mm
0-160
0-250
0-300
560
Reading
mm
0,05
0,05
0,05
21912290
Length of mark. rail135
mm
mm
71610102
Weight
g
470
520
Wooden case
Ref.No.
21912288
21912289
Calibration certif.
Ref.No.
71610103
71610102
21089004
mm
0-500
620
0,05
21912325
Height Gauges,
Tool Presetters
Height Measuring and Scribing
Instruments
HELIO - HIGH Digital / Analog
Fine adjustment
-
HELIO - HIGH Digital
- Data output
- Functions:
+/-: Reversing of measuring
direction
measuring values
SEND: Data transfer
HELIO - HIGH Analog
- Parallax-free reading
Delivery:
Incl. traceable calibration
certificate
-
Lightweight design
Lightweight design
Accessories
(optional extras):
Dial gauge holder
Ref.No. 21312012
Universal dial gauge holder
Ref.No. 21312013
Spare scriber point
Ref.No. 21901067
(for HELIO - HIGH Digital)
-
HELIO - HIGH Digital
Ref.No.
21312011
Measuring range
mm
0-300
Measuring range
inch
0-12
Reading
mm
0,01
Reading
inch
.0005
Error limits
lm
(20+L(mm)/20)
Weight
kg
4,6
Spare tip
Ref.No.
21311025
HELIO - HIGH Analog
Ref.No.
21320015
Measuring range
mm
0-300
Reading
mm
0,02
Weight
kg
4,5
Spare tip
Ref.No.
21311025
2
2
Height Gauges,
Tool Presetters
Instruments
MINI - VERT / MAXI - VERT
Data output
Plastic insulation grip,
fine adjustment
Rapid displacement
(only for MAXI - VERT)
Functions:
SEND: Data transfer
measuring values
Cross section of measuring
beam 24x12 mm
(MAXI - VERT 35x20 mm)
-
Ref. No. 21312015
-
Ref. No. 21311024
ø4
Ref. No. 21311014
-
Delivery:
- In polystyrene case
-
(MAXI - VERT in wooden case)
Incl. spare scriber point, carbide
Incl. calibration certificate
ø4
Ref. No. 21311023
Accessories
(optional extras):
Wooden case, dust cover
Spare scriber point,
carbide-tipped
Dial gauge holder, length 100 mm
Ref.No. 21311013 MINI - VERT
Ref. No. 21311024 MAXI - VERT
Universal dial gauge holder with
adjustable dovetail seat Ø 4 mm
Ref.No. 21311014 MINI - VERT
Ref.No. 21311023 MAXI - VERT
-
Ref.No.
21312015
21312016
Measuring range
mm
0-300
0-600
Measuring range
inch
0-12
0-24
Reading
mm
0,01
0,01
Reading
inch
.0005
.0005
Error limits
lm
20+L(mm)/20
20+L(mm)/20
Weight
kg
4,6
5,2
Wooden case
Ref.No.
21912332
21912334
Dust cover
Ref.No.
21311022
21311017
Spare scr.pt.,carb.
Ref.No.
21311002
21311002
Weight
kg
21,6
Wooden case
Ref.No.
inkl.
Dust cover
Ref.No.
-
Spare scr.pt.,carb.
Ref.No.
21311002
MAXI - VERT
Ref.No.
21314006
Measuring range
mm
0-1000
Measuring range
inch
0-40
Reading
mm
0,01
Reading
inch
.0005
Error limits
lm
20+L(mm)/20
Height Gauges,
Tool Presetters
Instruments
With reading magnifier
Rail and slideway made
of stainless steel
Fine adjustment
Reading parts
dull-chromed
Hardened bearing base,
LxWxH: 125x85x40 mm
Screwed, carbide-tipped
scriber point
Measuring surfaces
precision-lapped
-
Delivery
- In wooden case
Accessories
(optional extras):
-
Ref.No.
21412103
Measuring range
mm
0-300
Reading
mm
0,02
Weight
kg
5,2
Calibration certif.
Ref.No.
71611901
2
2
Height Gauges,
Tool Presetters
Locating Fixture for Turned Shafts
HELIO - CLAMP Vertical
Ref.No. 21315105
Application
The locating fixture is positioned
vertically on a granite surface plate.
The component to be measured
is positioned between centers.
Using a height gauge it is possible
to measure lengths, distances,
widths of grooves etc.
Scope of supply
Base with column
Support with standard support
with mobile tailstock and point
in tempered steel
-
Technical data
Max. length between
centers 800 mm
Center height 100 mm
Total weight 20.5 kg
Max. weight of workpiece 30 kg
Max. error of perpendicularity on
total length 0.05 mm
Tailstock stroke 10 mm
-
Accessories
(optional extras):
Dial gauge holder for radial
oscillation measurement
Ref.No. 21315120
Hollow points:
for base Ø 5-20 mm
Ref.No. 21315109
for base Ø 18-45 mm
Ref.No. 21315110
for tailstock Ø 18-45 mm
Ref.No. 27780028
Special points on request
-
-
Extension set horizontal
(see following page)
Ref.No. 21315115
Ref. No. 21315120
HELIO - CLAMP Vertical/Horizontal
Ref.No. 21315117
Vertical application
see HELIO - CLAMP Vertical
page before
Horizontal application
The workpiece to be measured is
positioned between centers.
Using dial gauges or measuring
probes concentricity or run-out
measurements can be measured.
Scope of supply
+ Extension set horizontal
Technical data
Accessories
(optional extras):
Height Gauges,
Tool Presetters
2
2
Height Gauges,
Tool Presetters
Tool Presetter
WVG 400 Basic unit
Tool socket SK 40 or SK 50
Instrument base with rotatable
tool sockets
Sturdy, vertical column, carrying
the guide cross
Easy-running guideways
Vertical adjustment by conversion
of coarse/fine adjustment,
horizontal by handwheel
-
Zero indicator
- Ball bearing type, 45 inclination
- Contacting of the workpiece edge
o
-
in X and Z direction is possible
without swivelling the zero
indicator
Tool cutting-edge easily accessible
Display elextronics
- Clearly arranged foil keyboard
- Large and high contrast displays
-
-
for X and Z axis, digit height 9
mm
Functions:
PRESET: Preselection for 2 values
For each axis 1 battery as well as
interface Opto RS232C
Horizontal axis additionally
equipped with facility to switch
from radius to Ø indication
Delivery
- In polystyrene packing
- Incl. calibration certificate
Accessories and reducing fittings
see following page
Basic instruments
Ref.No.
Tool socket
21760008
21760009
SK 40
SK 50
Measuring range
X axis
Ø=240 mm
Ø=240 mm
Measuring range
Z axis
L=400 mm
L=400 mm
Error limits
lm
20+L(mm)/10
20+L(mm)/10
Contacting force
N
0,8
0,8
True runn. acc. of
Spindle
< 5 lm
< 5 lm
Weight
kg
26,6
26,6
Height Gauges,
Tool Presetters
Tool Presetter - Accessories
Accessories
(optional extras):
Dust cover
Ref.No. 21760025
Printer interface
incl. cable
Ref.No. 21760026
Label printer
Ref.No. 21903005
Labels for printer
(8000 pcs.)
Ref.No. 21903017
Adhesive labels for
manual inscription
(5 rolls with 1000
labels each)
Ref.No. 21904010
Spare battery
type CR2032
Ref.No. 23004004
-
Lathe shank DIN 69880
Steep taper DIN 69871
-
Tool shank DIN 69893
-
Reducing fittings
- see table
Reducing fittings
Ref.No.
21760028
21760029
21760033
21760034
21760035
21760036
21760027
21760030
21760031
21760032
21760037
21760038
21760039
21760040
Reducing
SK40 x cyl. Ø20
SK40 x cyl. Ø30
SK50 x cyl. Ø20
SK50 x cyl. Ø30
SK50 x cyl. Ø40
SK50 x cyl. Ø50
SK40 x SK30
SK50 x SK30
SK50 x SK40
SK50 x SK45
SK50 x HSK32A/40B
SK50 x HSK40A/50B
SK50 x HSK50A/63B
SK50 x HSK63A/80B
for
Turning tools
Turning tools
Turning tools
Turning tools
Turning tools
Turning tools
SK30 tools
SK30 tools
SK40 tools
SK45 tools
HSK tools
HSK tools
HSK tools
HSK tools
DIN
69880 with ø20
69880 with ø30
69880 with ø20
69880 with ø30
69880 with ø40
69880 with ø50
2
3
Micrometers,
Bore Micrometer Systems
Linear Measuring Instrument Digital
HELIO - RAPID
Replaces 3 digital micrometers.
Data output RS232C
Measuring surfaces carbidetipped, plane parallel lapped
Constant measuring force
by spring
Dimensions 280x85x2 mm
Functions:
SEND: Data transfer
measuring values
MIN/MAX: Minimum/Maximum
TOL: Exceeding of tolerance
-
Threefold
measuring range
-
Delivery
In plastic case
-
Accessories
(optional extras):
Micrometer holder
Ref.No. 22601002
-
Ref.No.
22601001
22601003
22601004
Measuring range
mm/inch
0-75/0-3
0-72/0-3
0-68/0-2.7
Measuring span
mm/inch
20/0.8
20/0.8
20/0.8
Reading
mm
0,01/0,001
0,01/0,001
0,01/0,001
Reading
inch
.0005/.00005
.0005/.00005
.0005/.00005
Measuring surfaces
plane parallel Ø6.5mm
spherical Ø4.8/r=5mm
for tooth pitches
Error limits
lm
max.7
max.7
max.7
Repeatability
lm
2
2
2
Contacting force
N
3,5 +/-0,5
3,5 +/-0,5
3,5 +/-0,5
Weight
g
420
420
420
Micrometers,
External Micrometers Digital
Accuracy acc. to DIN 863 section 1
With clamping lever
Data output
Functions:
SEND: Data transfer
measuring values
Digit height 6 mm
Non-rotating spindle
Spindle pitch 1.0 mm
Spindle Ø 8.0 mm
Measuring surfaces
carbide-tipped,
plane parallel lapped
Insulation against hand
heat transfer
by ratchet
-
-
Delivery
- In wooden case
-
Ref.No. 23004004
Above 25 mm incl. setting gauge
Accessories
(optional extras):
Ref.No. 21901040
-
Ref.No.
22148010
22148011
22148012
22148013
Measuring range
mm
0-25
25-50
50-75
75-100
Measuring range
inch
0-1
1-2
2-3
3-4
Reading
mm
0,01/0,001
0,01/0,001
0,01/0,001
0,01/0,001
Reading
inch
.0005/.00005
.0005/.00005
.0005/.00005
.0005/.00005
Weight
g
780
800
1100
1160
Calibration certif.
Ref.No.
71610301
71610310
71610311
71610311
3
3
Micrometers,
DIGIMATIC
External micrometer with
data output directly from
the micrometric screw.
Functions:
ORIGIN
ZERO/ABS
DATA
HOLD
Interface Digimatic
Scale thimble and sleeve
dull-chromed, Ø 18 mm
Meas. spindle Ø 6.35 mm
with locking system
Hard metal measuring
surfaces, ground and
Frame lacquered
-
-
DIGIMATIC - Set
- Incl. case, setting gauge
(above 25 mm), setting key
and battery
Accessories
(optional extras):
-
Single micrometers
Ref.No.
22126020
22126021
22126022
22126023
Measuring range
mm
0-25
25-50
50-75
75-100
Reading
mm
0,001
0,001
0,001
0,001
Contacting force
N
5-10
5-10
5-10
5-10
Weight
g
400
500
820
1200
Calibration certif.
Ref.No.
71610301
71610310
71610311
71610311
Weight
g
2600
Calibration certif.
Ref.No.
s.o.
Set (4 pcs.)
Ref.No.
22126024
Measuring range
mm
0-100
Reading
mm
0,001
Contacting force
N
5-10
Micrometers,
External Micrometers
Heavy design
dull-chromed
Large thimble Ø 25 mm
Spindle pitch 1 mm and
100th graduations, thus
reading without addition
Spindle thread hardened
and ground
Spindle Ø 8.0 mm
Clamping ring
heat transfer
by sliding clutch Ø 25 mm
-
Delivery
In wooden case
Incl. setting key
Above 25 mm with
setting gauge
-
Accessories
(optional extras):
-
Spindle pitch 1 mm
Ref.No.
22190010
22190011
22190012
22190013
22190014
22190015
22190016
22190017
22190018
22190019
22190020
22190021
Measuring range
mm
0-25
25-50
50-75
75-100
100-125
125-150
150-175
175-200
200-225
225-250
250-275
275-300
Reading
mm
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
Weight
g
330
400
470
560
650
720
840
970
1050
1190
1290
1390
Calibration certif.
Ref.No.
71610301
71610310
71610311
71610311
71610312
71610312
71610312
71610312
71610312
71610312
71610312
71610312
3
3
Micrometers,
Standard design
dull-chromed
Thimble Ø 25 mm
Spindle Ø 6.35 mm
Clamping lever
Measuring surfaces carbidetipped, ground and plane
parallel lapped
Measuring arm forged,
dull-chromed
-
Delivery
- In case
- Incl. setting key,
- Above 25 mm with
setting gauge
Micrometer-Set
- In wooden case
- Incl. 3 setting gauges
and setting key
Accessories
(optional extras):
-
Single micrometers
Ref.No.
22204020
22204021
22204022
22204023
Measuring range
mm
0-25
25-50
50-75
75-100
Reading
mm
0,01
0,01
0,01
0,01
Contacting force
N
5-10
5-10
5-10
5-10
Weight
g
190
270
430
560
Calibration certif.
Ref.No.
71610301
71610310
71610311
71610311
Weight
g
1300
Calibration certif.
Ref.No.
71610315
Set (4 pcs.)
Ref.No.
22204108
Measuring range
mm
0-100
Reading
mm
0,01
Contacting force
N
5-10
Micrometers,
Robust design
dull-chromed
Thimble Ø 19 mm
Spindle Ø 8.0 mm
Clamping lever
heat transfer
by insulated ratchet
-
Delivery
In wooden case
Incl. setting key,
Above 25 mm with
setting gauge
-
Accessories
(optional extras):
-
Ref.No.
22213010
22213011
22213012
22213013
22213014
22213015
Measuring range
mm
0-25
25-50
50-75
75-100
100-125
125-150
Reading
mm
0,01
0,01
0,01
0,01
0,01
0,01
Weight
g
380
460
540
720
900
1000
Calibration certif.
Ref.No.
71610301
71610310
71610311
71610311
71610312
71610312
3
3
Micrometers,
Economical design
dull-chromed
Thimble Ø 17.0 mm
Spindle Ø 8.0 mm
Clamping lever
heat transfer
by ratchet
-
Delivery
In case
Incl. setting key,
Above 25 mm with
setting gauge
-
Micrometer-Set
In wooden case
Incl. 3 setting gauges
Incl. setting key
-
Accessories
(optional extras):
-
Single micrometers
Ref.No.
22133026
22133027
22133028
22133029
Measuring range
mm
0-25
25-50
50-75
75-100
Reading
mm
0,01
0,01
0,01
0,01
Weight
g
400
700
750
800
Calibration certif.
Ref.No.
71610301
71610310
71610311
71610311
Weight
g
2500
Calibration certif.
Ref.No.
71610315
Set (4 pcs.)
Ref.No.
22133030
Measuring range
mm
0-100
Reading
mm
0,01
Micrometers,
Accuracy better than DIN 863
Variable measuring range
Gauge block extension 50 mm,
which can be screwed on,
with lapped carbide-tipped
measuring surfaces
Adjustable spindle 50 mm
Thimble Ø 24 mm
Spindle Ø 10 mm
Measuring surfaces
carbide-tipped
Stable light metal frame
Clamping ring
by friction clutch
-
Delivery
- In wooden case
- Incl. setting key
- Incl. insert for measuring
range
- Incl. setting gauge
Accessories
(optional extras):
heat transfer
-
Larger measuring ranges
on request
Ref.No.
22216007
22216008
22216009
22216010
22216011
22216012
22216013
Measuring range
mm
300-400
400-500
500-600
600-700
700-800
800-900
900-1000
Reading
mm
0,01
0,01
0,01
0,01
0,01
0,01
0,01
Error limits
lm
7
8
9
9
9
10
10
Spindle pitch
mm
1,0
1,0
1,0
1,0
1,0
1,0
1,0
Lg. of sett. gauges
mm
350
450
550
650
750
850
950
Weight
kg
4,5
5,6
7,2
10,0
12,5
14,9
18,2
Calibration certif.
Ref.No.
71610312
71610313
71610313
71610313
71610314
71610314
71610314
3
3
Micrometers,
Variable measuring range,
form D16.
Interchangeable measuring anvil
dull-chromed
Thimble Ø:
up to meas. range 300 = 20 mm
above meas. range 300 = 24 mm
Spindle hardened, threads
precision ground
Spindle Ø:
up to meas. range 300 = 6.5 mm
above meas. range 300 = 10 mm
Frame:
up to 300 mm = GGG
(nodular graphite iron)
above 300 mm = Light metal
Clamping ring
by sliding clutch
-
Delivery
- In wooden case
- Incl. setting key
- Incl. inserts for meas. ranges
- Incl. setting gauges
Accessories
(optional extras):
-
on request
Ref.No.
22215111
22215112
22215113
22215114
22215115
22215116
22215117
22215118
22215119
22215120
22215121
Measuring range
mm
0-150
100-200
150-300
200-300
300-400
400-500
500-600
600-700
700-800
800-900
900-1000
Reading
mm
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
Error limits
lm
5
6
7
7
8
9
10
11
11
12
12
Spindle pitch
mm
0,5
0,5
0,5
0,5
1,0
1,0
1,0
1,0
1,0
1,0
1,0
Number of inserts
Piece
6
4
6
4
4
4
4
4
4
4
4
Lg. of sett. gauges
mm
25+75+125
125+175
175+225+275
225+275
325+375
425+475
525+575
625+675
725+775
825+875
925+975
Weight
kg
1,5
1,8
2,7
2,5
5,4
7,2
9,0
11,3
14,4
16,5
19,5
Calibration certif.
Ref.No.
71610312
71610312
71610312
71610312
71610312
71610313
71610313
71610313
71610314
71610314
71610314
Micrometers,
External Micrometers with Indicator
and 3
Form D13.
For serial tests and
measurement of
tooth pitches.
Indicator acc. to DIN 879
dull-chromed
Anvil travel 2.5 mm
Thimble Ø 20.0 mm
Spindle Ø 8.0 mm
Clamping lever
Adjusting nut
Measuring surfaces
carbide-tipped,
Frame up to 50 mm entirely
dull-chromed, with plastic
insulation against hand
heat transfer
-
Delivery
In wooden case
-
Accessories
(optional extras):
-
Further sizes
on request
Ref.No.
22173001
22173002
22173101
22173102
Scale thimble
MR mm
0-25
25-50
0-25
25-50
Reading
mm
0,01
0,01
0,01
0,01
Prec. indicator
MR lm
+/-140
+/-140
+/-70
+/-70
Reading
lm
2
2
1
1
Weight
g
980
1100
980
1100
Calibration certif.
Ref.No.
71610306
71610306
71610306
71610306
3
3
Micrometers,
External Micrometers with Counter
Counter reading
dull-chromed
Thimble Ø 17 mm
Spindle Ø 6.5 mm
Clamping screw
Measuring surfaces
carbide-tipped,
heat transfer
by ratchet
-
Delivery
- Incl. setting key
- Above 25 mm with
setting gauge
Accessories
(optional extras):
Ref.No.
22206201
22206202
Measuring range
mm
0-25
25-50
Reading thimble
mm
0,01
0,01
Reading counter
mm
0,01
0,01
Weight
g
340
360
Calibration certif.
Ref.No.
71610301
71610310
Micrometers,
External Micrometer Digital
With spindle travel 7 mm
Data output
Spindle adjusting screw
Functions:
2 Setting storages
Zero setting
Max/Min function
Recall of preset value
Input of tolerance value
Blocking function (holds the
last value measured in the
display, until it is deleated)
Switsching mm/inch
Evenness:
0-30 mm: 0,0003 mm/0.00001“
30-60 mm: 0,0006 mm/0.00002“
Parallelism:
0-30 mm: 0,001 mm/0.00004“
30-60 mm: 0,002 mm/0.00006“
Accuracy:
0-30 mm: 0,004 mm/0.00016“
30-60 mm: 0,005 mm/0.0002“
Repeatability:
0-30 mm: 0,001 mm/0.00005“
30-60 mm: 0,001 mm/0.00005“
-
-
Delivery
- incl. battery type CR2032 and
interface cable RS232C (2 m)
Accessories
(optional extras):
Special meas. inserts for
measuring gear teeth, threads
and grooves on request
Parallel gauge blocks accuracy 0
for adjustment
-
Ref.No.
22173111
22173112
Measuring range
mm
0-30
30-60
Measuring range
inch
0-1.25
1.25-2.5
Reading
mm
0,01/0,001
0,01/0,001
Reading
inch
.0005/.00005
.0005/.00005
Weight
g
820
950
Calibration certif.
Ref.No.
71630101
71630101
3
3
Micrometers,
External Micrometers for Tooth Pitches
For tooth pitches
Form D7. For measurement
of tooth pitches.
dull-chromed
Thimble Ø 20.0 mm
Clamping ring
precision ground
Meas. plate hardened, plane
parallel lapped, Ø 25 mm
Smallest module 0.8 mm
Frame made of nodular
graphite iron, lacquered
heat transfer
by sliding clutch
-
Delivery
In wooden case
Incl. setting key and
setting gauge
-
Accessories
(optional extras):
-
Special design
- Larger measuring ranges
- Thread pitch 1 mm and
- Meas. plates carbide-tipped
on request
Ref.No.
22184001
22184002
22184003
22184004
22184005
22184006
22184007
22184008
Measuring range
mm
0-25
25-50
50-75
75-100
100-125
125-150
150-175
175-200
Reading
mm
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
Setting gauge
mm
25
50
75
100
125
150
175
Measure M
mm
37
62
87
112
139
164
190
215
Measure T
mm
24
34
46
60
72
85
97
110
Measure A
mm
13
13
15
15
15
15
15
15
Weight
g
520
640
740
900
1050
1160
1370
1550
Calibration certif.
Ref.No.
71610301
71610310
71610311
71610311
71610312
71610312
71610312
71610312
Micrometers,
External Micrometers for External
Threads
and 3
External caliper form D18
For measurement of the pitch Ø
dull-chromed
Clamping ring
Spindle and anvil with reception
bore for meas. inserts Ø 3.5 mm
Frame with insulation against
hand heat transfer
by friction clutch
-
Delivery
- In wooden case
- Without measuring inserts
Measuring inserts
Accessories
(optional extras):
Setting gauges and meas. inserts
metric 60o (see table)
-
Setting gauges and meas. inserts
o
and
trapezoidal threads on request
- For Whitworth-thread 55
Micrometers
Ref.No.
Measuring range
mm
0-25
25-50
50-75
75-100
100-125
125-150
22183001
22183002
22183003
22183004
22183005
22183006
Reading
mm
0,01
0,01
0,01
0,01
0,01
0,01
Thimble - Ø
mm
20
20
20
20
20
20
Spindle pitch
mm
0,5
0,5
0,5
0,5
0,5
0,5
Weight
g
600
760
850
1000
1120
1220
Calibration certif.
Ref.No.
71610301
71610301
71610302
71610302
71610303
71610303
Setting gauges
Ref.No.
Measuring range
mm
25-50
50-75
75-100
100-125
125-150
22283001
22283002
22283003
22283004
22283005
Setting gauge
mm
25
50
75
100
125
Calibration certif.
Ref.No.
71630801
71630801
71630801
71630801
71630801
Measuring inserts
Ref.No.
22088001
22088002
Pitch
mm
0,35-0,5
0,6-0,8
Calibration certif.
Ref.No.
71630901
71630901
Ref.No.
22088003
22088004
Pitch
mm
0,9-1,25
1,5-2,0
Calibration certif.
Ref.No.
71630901
71630901
Ref.No.
22088005
22088006
Pitch
mm
2,5-3,5
4,0-6,0
Calibration certif.
Ref.No.
71630901
71630901
3
3
Micrometers,
Internal Micrometers with Jaws
Analogue
Scale thimble and
sleeve dull-chromed
Spindle hardened,
threads precision
ground
Measuring surfaces
hardened, spherically
ground and lapped
Measuring jaws
adjustable
Constant measuring
force by ratchet
-
Delivery
In wooden case
-
Accessories
(optional extras):
-
Ref.No.
22400007
22400008
Measuring range
mm
3-10
5-45
Reading
mm
0,01
0,01
Thimble - Ø
mm
20
20
Spindle pitch
mm
0,5
0,5
Weight
g
240
240
Calibration certif.
Ref.No.
71610704
71610704
Micrometers,
With double scale
Scale thimble and
sleeve dull-chromed
Spindle hardened,
threads precision
ground, ball bearing
Measuring surfaces
cylindrical,
Insolation against hand
heat transfer
by friction clutch
-
Delivery
- In wooden case
Accessories
(optional extras):
Carbide measuring
surfaces and friction
coupling on request
-
on request
Ref.No.
22300001
Measuring range
mm
5-35/30-55
Reading
mm
0,01
Thimble - Ø
mm
21
Spindle pitch
mm
0,5
Weight
g
490
Calibration certif.
Ref.No.
71610705
3
3
Micrometers,
External Micrometers for Pipe Wall
Thicknesses
and 3
For pipe wall thicknesses
Form D12.
For measurement of
wall thicknesses on
curved faces.
Scale thimble and
sleeve dull-chromed
Adjusting nut
Spindle hardened,
threads precision
ground
Measuring pin Ø 8.0 mm
Spherical anvil
Ø 3.5 mm / 8.0 mm
-
Delivery
In wooden case
-
Accessories
(optional extras):
-
Ref.No.
22191014
Measuring range
mm
0-25
Measuring depth
mm
23
Reading
mm
0,01
Thimble - Ø
mm
20
Spindle pitch
mm
0,5
Weight
g
480
Calibration certif.
Ref.No.
71610301
Micrometers,
External Micrometers with Scale Disc
For rolled stock
For measurement of sheet
metal and strips.
Scale disc Ø 60 mm
Spindle Ø 6.5 mm
Measuring surfaces
steel, hardened
(hardened steel
on request)
Friction clutch
-
Accessories
(optional extras):
Wooden case
-
Ref.No.
22312010
22312011
22312012
Measuring range
mm
0-10
0-25
0-25
Frame depth
mm
35
50
100
Reading
mm
0,01
0,01
0,01
Spindle pitch
mm
1,0
1,0
1,0
Weight
g
270
470
800
Calibration certif.
Ref.No.
71610301
71610301
71610301
3
3
Micrometers,
Micrometer Holders
Rotatable and swivelling
Ref.No. 22601002
For micrometers
up to measuring
range 200 mm
Weight approx. 3060 g
-
Ref. No. 22601002
Micrometer Holder
Ref.No. 22188003
Cast iron
Clamp jaws with leather coating
For micrometers up to measuring range 100 mm
empty
-
Ref.No. 22188003
Micrometers,
Micrometer Heads Digital
With data output
Positive counting direction
(with entering of the spindle)
Carbide measuring surfaces,
lapped
Functions:
SEND: Data transfer
measuring values
Digit height 6 mm
-
-
Delivery
Ref.No. 23004004
Accessories
(optional extras):
Ref.No. 21901067
-
Ref.No.
22149002
Measuring range
mm/inch
0-25/0-1
Reading
mm/inch
0,001/.00005
Spindle pitch
mm
1,0
Mount. dimension
L 1/2/3
31/16/152,5 mm
Mount. dimension
D 1/2/3
8/12/26,5 mm
Mount. dimension
h
13 mm
Weight
g
420
Calibration certif.
Ref.No.
71610601
3
3
Micrometers,
Micrometer Heads
Constant measuring force by
ratchet
Scale thimble and
sleeve dull-chromed
Spindle hardened,
threads precision
ground
Measuring surfaces
hardened and lapped
-
Accessories
(optional extras):
-
Further dimensions
and versions
on request
Ref.No.
22203001
22301001
Measuring range
mm
0-15
0-25
Reading
mm
0,01
0,01
Spindle pitch
mm
0,5
Mount. dimension
L 1/2/3
17,5/16/93 mm
28,5/17,5/113 mm
Mount. dimension
D 1/2/3
6,5/12/20 mm
6,5/12/18 mm
Weight
g
120
80
Calibration certif.
Ref.No.
71610601
71610601
Micrometers,
Internal Stick-Micrometers Cylindrical
integrated
block gauges
With integrated gauge blocks
Spherical gauge blocks are
integrated in the extensions.
Form A2
dull-chromed
Basic micrometer 50-65 mm
(for meas. range 100-1150 the
basic micrometer is 100-125 mm)
Locking screw
Extensions with insulation
against hand heat transfer
spherically lapped
-
Delivery
In wooden case
-
Accessories
(optional extras):
Holder for internal micrometers,
suitable for meas. ranges under
100 mm, length 220 mm
Ref.No. 22200202
(incl. extensions)
-
Ref.No.
22175201
22175202
22175002
22175003
22175004
22175005
22175006
Measuring range
mm
50-65
100-125
50-250
50-450
50-850
50-1450
100-1100
Measuring span
mm
15
25
15
15
15
15
25
Reading
mm
0,01
0,01
0,01
0,01
0,01
0,01
0,01
Extensions
mm
15/25/50/100
15/25/50/100/200
15/25/50/100/200/400
15-100/2x200/2x400
25/50/100/2x200/400
Thimble - Ø
mm
18
18
18
18
18
18
18
Spindle pitch
mm
0,5
0,5
0,5
0,5
0,5
0,5
0,5
Weight
g
70
180
615
840
1400
1950
2000
Calibration certif.
Ref.No.
71610701
71610702
71610710
71610711
71610712
71610713
71610714
3
3
Micrometers,
Form A2
dull-chromed
Extensions with insulation
Extensions lapped to gauge
block length
spherically lapped
-
Delivery
In wooden case
-
Accessories
(optional extras):
Holder for internal micrometers
(suitable for meas. ranges
under 100 mm),
length 220 mm
Ref.No. 22200202
(incl. extensions)
-
-
Further dimensions/versions
on request
Ref.No.
22167302
22167102
22167103
22167105
22167106
22167107
Measuring range
mm
50-75
50-300
50-450
50-850
50-1250
50-1450
Reading
mm
0,01
0,01
0,01
0,01
0,01
0,01
Extensions
mm
25/2x50/100
25/50/100/200
25/50/100/200/400
25/50/100/2x400
25/50/100-600
Thimble - Ø
mm
17
17
17
17
17
17
Spindle pitch
mm
0,5
0,5
0,5
0,5
0,5
0,5
Weight
g
100
530
760
1280
1650
2040
Calibration certif.
Ref.No.
71610702
71610715
71610716
71610717
71610718
71610719
Micrometers,
Form A1
dull-chromed
precision ground,
adjustable above size 100
Extensions above 100 mm with
clamping ring and insulation
spherically lapped, Ø 6 mm
-
Delivery
In wooden case
-
Accessories
(optional extras):
Holder for internal micrometers
(suitable for meas. ranges under
100 mm), length 220 mm
Ref.No. 22200202
(incl. extensions)
-
Further dimensions/versions
on request
Ref.No.
22200160
22200161
22200162
22200163
22200164
22200165
22200166
22200167
22200168
22200169
22200170
22200171
22200172
22200173
22200174
22200175
22200176
22200177
22200178
22200179
22200180
Measuring range
mm
25-30
30-35
35-50
50-75
75-100
100-125
125-150
150-175
175-200
200-225
225-250
250-275
275-300
300-325
325-350
350-375
375-400
400-425
425-450
450-475
475-500
Reading
mm
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
Thimble - Ø
mm
15
15
15
16
17
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Length of meas. pin
mm
1,5
1,5
1,5
1,5
6
6
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Weight
g
95
100
105
130
160
260
280
330
360
420
440
480
500
560
580
620
640
720
750
770
790
Calibration certif.
Ref.No.
71610701
71610701
71610701
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
71610702
3
3
Micrometers,
Internal Micrometers Analog
IN - MESS Analog
Fixed anvils 6-200 mm
Hard metal measuring inserts
above 12.5 mm
Can be used for through holes
and above 12.5 mm also for
blind bores
by ratchet
-
Advantages
No change of anvils
necessary
Suited for small through
holes
Measurement nearly up to
the ground of the bore
-
Delivery
Incl. setting ring
-
Accessories
(optional extras):
Extensions
Sets (see following page)
Gauge heads with special
measuring inserts
on request
-
Ref. No. 22141018
Single measuring instruments
Ref.No.
22141011
22141012
22141013
22141014
22141015
22141016
22141017
22141018
22141019
22141020
22141021
22141022
22141023
22141024
22141025
Measuring range
mm
6-8
8-10
10-12,5
12,5-16
16-20
20-25
25-35
35-50
50-65
65-80
80-100
100-125
125-150
150-175
175-200
Measuring depth
mm
58
58
58
62
62
66
66
80
80
80
100
115
115
115
115
Reading
mm
0,005
0,005
0,005
0,005
0,005
0,005
0,005
0,005
0,005
0,005
0,005
0,005
0,005
0,005
0,005
Accuracy
mm
0,003
0,003
0,003
0,003
0,003
0,003
0,003
0,003
0,004
0,004
0,004
0,005
0,005
0,005
0,005
Setting ring
mm
8
8
12,5
12,5
20
20
35
35
65
65
80
125
125
175
175
Extension
Ref.No.
22129201
22129201
22129202
22129203
22129203
22129204
22129204
22129204
22129205
22129205
22129205
22129205
22129205
22129205
22129205
Length
mm
63
63
76
100
100
150
150
150
150
150
150
150
150
150
150
Calibration certif.
Ref.No.
71695010
71695011
71695012
71695013
71695014
71695015
71695016
71695017
71695018
71695018
71695019
71695020
71695021
71695022
71695023
Micrometers,
Internal Micrometers Analog - Sets
IN - MESS Analog
The sets contain
For each measuring range
one micrometer and one
gauge head
Depending on size of set
one or more setting rings
-
Advantages
Large measuring range,
therefore only a few numbers
of gauge heads per set are
necessary
-
Delivery
In wooden case
-
Accessories
(optional extras):
-
Ref. No. 22141033
Sets
Ref.No.
22141031
22141032
22141033
22141034
22141035
22141036
Measuring range
mm
6-10
10-20
20-50
50-100
100-150
150-200
Micrometers
Number
2
3
3
3
2
2
Setting rings
Number
1
2
2
2
1
1
Weight
kg
1,0
1,9
2,8
6,5
8,5
10,3
Calibration certif.
Ref.No.
71695001
71695002
71695003
71695004
71695036
71695037
3
3
Micrometers,
Bore Micrometers Digital
IN - MESS Digital
Data output RS232C
Digital display to be read easily
2 measuring values can be
stored in memory
above 12.5 mm
blind bores
Constant meas.force by ratchet
-
Delivery
- Incl. setting ring
Accessories
(optional extras):
Extensions
-
Sets and displays
see following page
Special versions:
For threads, grooves, deep
holes, recesses and deep
bores on request
meas. inserts (e.g. for meas.
of recesses, threads, toothings
etc.) on request
-
Ref. No. 22142018
-
Ref.No.
22142011
22142012
22142013
22142014
22142015
22142016
22142017
22142018
22142019
22142020
22142021
22142022
22142023
22142024
22142025
Measuring range
mm
6-8
8-10
10-12,5
12,5-16
16-20
20-25
25-35
35-50
50-65
65-80
80-100
100-125
125-150
150-175
175-200
Measuring depth
mm
58
58
58
62
62
66
66
80
80
80
100
115
115
115
115
Reading
mm
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
Accuracy
mm
0,003
0,003
0,003
0,003
0,003
0,004
0,004
0,004
0,004
0,004
0,004
0,005
0,005
0,005
0,005
Setting ring
mm
8
8
12,5
12,5
20
20
35
35
65
65
80
125
125
175
175
Extension
Ref.No.
22129201
22129201
22129202
22129203
22129203
22129204
22129204
22129204
22129205
22129205
22129205
22129205
22129205
22129205
22129205
Length
mm
63
63
76
100
100
150
150
150
150
150
150
150
150
150
150
Calibration certif.
Ref.No.
71695010
71695011
71695012
71695013
71695014
71695015
71695016
71695017
71695018
71695018
71695019
71695020
71695021
71695022
71695023
Micrometers,
Bore Micrometers Digital - Sets and
Displays
IN - MESS Digital
The sets contain
One micrometer with
digital display and
interface RS232C
For each measuring
range a gauge head
Depending on size
of set one or more
setting rings
-
Advantages
- Large measuring range,
therefore only a few
numbers of gauge heads
per set are necessary
Delivery
- In wooden case
Accessories
(optional extras):
-
Ref. No. 22142033
Sets + displays
Ref.No.
22142031
22142032
22142033
22142034
22142035
22142036
22142037
Measuring range
mm
6-10
10-20
20-50
50-100
100-150
150-200
100-200
Gauge heads
Number
2
3
3
3
2
2
4
Setting rings
Number
1
2
2
2
1
1
2
Weight
kg
0,9
1,7
2,5
6,2
6,5
7,0
7,0
Display unit
Ref.No.
22142301
22142302
22142303
22142304
22142305
22142305
22142305
Calibration certif.
Ref.No.
71695001
71695002
71695003
71695004
71695036
71695037
71695029
3
3
Micrometers,
Bore Measuring Systems Digital with
Pistol Grip Holder
HELIO - MATIC Integral
Data output RS232C
Digital display to be read easily
2 measuring values can be
stored in memory
Self-centering gauge heads
Constant meas.force by ratchet
above 12.5 mm
blind bores
-
Delivery
Incl. setting ring
-
Accessories
(optional extras):
Extensions
Interface cable Opto RS232C (2m)
Ref.No. 21901067
measuring inserts (e.g. for
measurement of recesses,
threads, toothings etc.)
on request
Ref. No. 22143019
-
Sets
see following page
Ref.No.
22143011
22143012
22143013
22143014
22143015
22143016
22143017
22143018
22143019
22143020
22143021
22143022
22143023
22143024
22143025
Measuring range
mm
6-8
8-10
10-12,5
12,5-16
16-20
20-25
25-35
35-50
50-65
65-80
80-100
100-125
125-150
150-175
175-200
Measuring depth
mm
58
58
58
62
62
66
66
80
80
80
85
100
100
100
100
Reading
mm
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
0,001
Accuracy
mm
0,004
0,004
0,004
0,004
0,004
0,004
0,004
0,004
0,005
0,005
0,005
0,005
0,005
0,005
0,005
Setting ring
mm
8
8
12,5
12,5
20
20
35
35
65
65
80
125
125
175
175
Extension
Ref.No.
22129201
22129201
22129202
22129203
22129203
22129204
22129204
22129204
22129205
22129205
22129205
22129205
22129205
22129205
22129205
Length
mm
63
63
76
100
100
150
150
150
150
150
150
150
150
150
150
Calibration certif.
Ref.No.
71695010
71695011
71695012
71695013
71695014
71695015
71695016
71695017
71695018
71695018
71695019
71695020
71695021
71695022
71695023
Micrometers,
Pistol Grip Holder - Accessories
HELIO - MATIC Integral
The sets contain
One pistol grip holder with
integrated swivelling digital
display with interface RS232C
For each measuring range
a gauge head
Depending on size of set
one or more setting rings
-
Advantages
Large measuring range,
therefore only a few numbers
of gauge heads per set are
necessary
-
Delivery
In wooden case
-
Accessories
(optional extras):
-
Ref. No. 22143039
Sets + pistol grips
Ref.No.
22143031
22143038
22143032
22143033
22143039
22143034
22143035
22143036
22143037
Measuring range
mm
6-10
6-20
10-20
20-50
20-100
50-100
100-150
150-200
100-200
Gauge heads
Number
2
5
3
3
6
3
2
2
4
Setting rings
Number
1
3
2
2
4
2
1
1
2
Weight
kg
1,4
3,4
2,6
3,2
8,8
7,0
10,4
15,4
18,4
Pistol grip
Ref.No.
22143301
22143301
22143301
22143302
22143302
22143302
22143302
22143303
22143303
Calibration certif.
Ref.No.
71695001
71695030
71695002
71695003
71695031
71695004
71695036
71695037
71695029
3
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Universal Comparative Gauge Uhrtast
HELIOS - UHRTAST
Comparative gauge for external
and internal measurements for
workpiece checking and machine
adjustment.
By the large choice of probes and
meas. inserts, it is of versatile use
for comparative measurements.
Measuring range up to 2000 mm
by using optional extensions.
Very high accuracy
thanks to the solid design and
accurate manufacturing.
The carriage is double-mounted
in pretensioned ball-guides.
by a long travel spring.
The travel of the measurig
carriage is transferred without
any tilting or clearance to the
indicating instrument.
The direction of the measuring
force is reversible, thus allowing
the instrument to be used both
for external and internal
measurements.
The setting
is effected by means of an
adjusting instrument, master
piece, gauge block combination,
ring gauge, micrometer or an
extly measured workpiece.
Delivery
In wooden case for depositting
the extensive accessories
Incl. insulation against hand
heat transfer
-
-
Documents
available
Datenblatt im Internet
www.helios-messtechnik.de
Accessories and applications
see following page
Ref.No.
23285050
Intern. measurement
mm
15-230 (Standard)
Extern. measurement
mm
5-220 (Standard)
Measuring force
outside
4N
Measuring force
inside
6N
Weight
kg
2,7
Comparative Gauge - Uhrtast Accessories and Examples for
Application
Accessories
(optional extras):
Measuring range can
be extended by using
extensions up to
2000 mm
Extension 100 mm
Ref.No. 23285003
Extension 200 mm
Ref.No. 23285004
Extension 500 mm
Ref.No. 23285005
-
Additional accessories are
depending from application.
Example
see the following pages.
empty
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Application
Measuring of external projections
Pos. 1 Basic instrument
Ref.No. 23285050
Pos. 2 Dial gauge
Ref.No. 23230001
Pos. 3 Holders for
measuring probes
Ref.No. 23285006
Pos. 4 Inserts for
external projections
Ref.No. 23285007
-
Projection measurement
Measuring of recesses
Pos. 1 Basic instrument
Ref.No. 23285050
Pos. 2 Dial gauge
Ref.No. 23230001
Pos. 3 Holders for
measuring probes
Ref.No. 23285006
Pos. 4 Inserts
Ref.No. 23285025
-
Measurement of recesses
Application
Measuring with support table
Pos. 1
Basic instrument
(without insulation
against hand heat
transfer)
Ref.No. 23285001
and table with supports
Ref.No. 23285026
consisting of:
Pos. 3.1
Support table Ø 180 mm
Pos. 3.2
Holders for measuring
probes
Pos. 3.3
Supports
-
-
Detailed documentation
is available on request.
These are only few examples
of possible applications.
Internet-download
www.helios-metrology.com
Documents
available
Measuring with support table
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Long Range Gauge Head Digital
HELIO - TAST 100
Replaces numerous dial gauges,
precision indicators and
measuring devices.
Integrated display and
calculator
Interchangeable contact point,
thread M 2.5
Manual by turning knob or
motorised spindle operation
Constant meas. force (adjustable, if spindle is motordriven)
Interface RS232C
Instrument with 5 functions:
Setting of ref. point (zero setting)
Differential and run-out meas.
MAX/MIN value indication
Reversing of measuring direction
Transfer of meas. values to a PC
With 10 functions, additional:
Rel. meas.-incremental dimensions
Preset value-display
Switching mm/inch
Doubling of tol. bar value display
Height measuring program
-
-
-
Examples for applications
see following page
Delivery
In polystyrene packing
Incl. traceable calibration
certificate
Incl. adaptor for spherical tip
extension arm Ø 5 mm
-
Accessories
(optional extras):
see following page
Ref.No.
27749001
27749002
27749003
Functions
Number
10
5
10
Measuring span
mm
100
100
100
Reading
mm
0,001/0,0001
0,001/0,0001
0,001/0,0001
Reading
inch
.00005/.000005
.00005/.000005
.00005/.000005
Error limits
lm
1+L(mm)/100
1+L(mm)/100
1+L(mm)/100
Repeatability
lm
0,6
0,6
0,3
Spindle drive
manual
manual
motorised
Contacting force
N
1,0
1,0
0,8-2,2
Weight
g
1650
1730
2100
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Long Range Gauge Head Digital Examples for Applications / Accessories
HELIO - TAST 100
C
B
Application 2
Height measurement:
Determination of bore
diameters and distances
and center distance bore/groove
with spherical tip extension arm
a2
a5
-
a3
Application 1
Length measurement:
Measurement of
differences,
Minimum/Maximum,
incremental dimensions
a4
-
a1
A
0
Example 1
B
Accessories
(optional extras):
a3
-
Alternativly:
- Adaptor, stationary
Ref. No. 27752003
Spherical steel tip extension arm
For measurement of
Center distances bore/groove
Ball Ø 2 mm, Ref.No. 23115001
-
Additional measuring inserts
0
Example 2
a1
Precision gauge stand, granite
plate
Ref.No. 23267003
Incl. adjustable adaptor
Ref.No. 27752004
Dimensions 300x300 mm
Evenness 0.002 mm
Weight approx. 26 kg
Delivery in wooden crate
a2
A
Gauge stand
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Precision Gauge Head Electronic
HETA 12.1/30.1 Manual
For application in the
precision manufacture,
in the fixture and instrument
construction.
The incremental precision glass
reference scale and probe spindle
lie on the same plane in conformity
with the ABBE principle.
Also available in Heidenhain
compatible design
Incremental, opto electronic
measuring system
Lateral cable outlet
(1.5 m) with plug Binder
Shank Ø 8h6
Interchangeable contact point
thread M 2.5
Admissible lateral force 0.8 N
Grid constant 20 lm
-
Delivery
- Incl. traceable
Accessories
(optional extras):
External meas. value display unit
(e.g. UNITRON 2 CHA
see following page)
Special pliers to exchange the
measuring inserts
Ref.No. 23115005
Spare lever probe lifter
Ref.No. 27754012
-
Ref. No. 27754022
-
Ref. No. 27754023
Ref.No.
27754022
27754023
Measuring span
mm
12
30
Accuracy
mm
0,001
0,001
Measuring force
downw.
0,6-1,8 N
0,7-1,4 N
Measuring force
upwards
0,4-1,6 N
0,3-1,0 N
Meas.force vertical
0,5-1,7 N
0,5-1,2 N
Weight
g
40
50
Display Unit for Precision Gauge Heads
UNITRON 2 CHA
Ref.No. 21909017
Measuring value display unit
for measuring instruments with
incremental opto electronic
measuring system
(HETA 12/30, UMG 50).
2 Measuring value inputs
Measuring value display
10 digits
Digit height 13 mm
Reading adjustable
0.0001/0.001/0.005 mm
.000005/.00001/.00005 inch
Dialog display 16 digits with
tolerance bar indication
Scale correction
Comfortable user guidance
Interface RS232C
Also available in Heidenhain
compatible design
Weight approx. 3.6 kg
-
Accessories
(optional extras):
Stand height 390 mm
Ref.No. 27770717
Stand height 210 mm
Ref.No. 27770719
Connection cable
UNITRON 2 CHA - UMG 50
Ref.No. 21901032
-
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Dial Gauges Digital
-
ø 10
24.3
9.5
ø12
B
C
A
ø 60
-
ø 58.8
With LCD display
Aluminium housing
Protective system IP 51
Display rotatable by 270o
Measuring spindle made
of stainless steel, hardened
and ground
Shank Ø 8h6
probe thread M 2.5
Interface RS232C
Functions:
Switching mm/inch
Zero setting at each position
PRESET: Preselection
Electronics can be switched off
LCD indication 6 digits
Extra large figures,
digit height 8.5 mm
A
ø8h6
19
4
ø4
-
-
Delivery
Ref.No. 23004004
Accessories
(optional extras):
Ref.No. 21901067
Lifting lever
Ref.No. 23004013
Lifting lever on top for 12.5/25
mm
Ref.No. 23004014
-
Ref. No. 23004001
-
Ref.No.
23004001
23004006
23004007
23004008
23004009
23004010
23004011
23004012
Measuring range
mm
25
25
12,5
12,5
50
50
100
100
Reading
mm
0,001
0,01
0,001
0,01
0,001
0,01
0,001
0,01
Error limits
lm
5
10
5
10
7
20
8
20
Repeatability
lm
2
2
2
2
2
2
2
2
Contacting force
N
0,65-1,15
0,65-1,15
0,65-0,90
0,65-0,90
1,25-2,70
1,25-2,70
1,60-3,50
1,60-3,50
Dimensions mm
A/B
82,5/64/54
82,5/64/54
66/54/50,5
66/54/50,5
142,5/121/88
142,5/121/88
244,5/172/139
244,5/172/139
Weight
g
230
220
230
230
440
440
520
520
Calibration certif.
Ref.No.
71611105
71611106
71611105
71611106
71611110
71611109
71611111
71611111
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Dial Gauges Digital
-
24.3
9.5
ø 10
ø12
B
C
A
ø 60
ø 58.8
-
A
ø8h6
19
With special functions
Aluminium housing
Protective system IP 51
Display rotatable by 270o
Meas. spindle made of stainless
steel, hardened and ground
Shank Ø 8h6
probe thread M 2.5
Interface RS232C
Functions:
Switching mm/inch
Zero setting at each position
PRESET: Preselection
Electronics can be switched off
LCD indication 6 digits
-
ø4
-
Additional functions
MIN/MAX/DELTA storage
Tolerance display
Preset value recall
Reversal of measuring direction
Selection of resolution
Half duplex transmission
Ref.No. 23004027 with
special measuring function
for bore gauges
-
with special functions
Ref. No. 23004015
Delivery
Accessories
(optional extras):
Ref.No. 21901067
Lifting lever
Ref.No. 23004013
Lifting lever for 12.5/25 mm
Ref.No. 23004014
-
Ref.No.
23004015
23004016
23004027
Measuring range
mm
25
12,5
12,5 int./ext.
Reading
mm
0,01/0,001
0,01/0,001
0,001
Error limits
lm
5
5
5
Repeatability
lm
2
2
2
Contacting force
N
0,65-1,15
0,65-0,90
0,65-0,90
Dimensions mm
A/B
82,5/64/54
66/54/50,5
66/54/50,5
Weight
g
330
315
315
Calibration certif.
Ref.No.
71611105
71611105
71611105
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Dial Gauges Digital / Mini - Dial Gauges
With digital display LCD
Polyamide case
Protection IP 65
Fixed display
Stainless steel measuring pin
hardened and ground
Clamping stem Ø 8 h6
thread M 2.5
Data output RS232 combined
with external power supply
Simplex transmission
Functions:
Selection mm/inch
Zero setting
Mode absolut or relaltive
Selection of measuring direction
Input of preset value <= 130
Automatic power shut down
Digital display LCD, 6 digits
Height of digits 6 mm
14.2
5
13
-
42.5
58
Ø 44
5
-
16
18
Ø 8h6
13
Ø4
7
13
-
109
-
S
8.54
0
-100
Ø 1.5
Delivery
Ref.No. 23004004
-
NEW!
Accessories
(optional extras):
Ref.No. 21901044
-
Ref.No.
23004030
23004032
Measuring range
mm/inch
12,5/.5
12,5/.5
Reading
mm
0,01
0,001
Error limits
lm
10
5
Repeatability
lm
5
2
Contacting force
N
0,5-0,9
0,5-0,9
Weight
g
70
70
Calibration certif.
Ref.No.
71611106
71611105
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
With digital and analogic display
LCD
Polyamide case
Protection IP 65
Fixed display
Stainless steel measuring pin
hardened and ground
Clamping stem Ø 8 h6
thread M 2.5
Data output RS232 combined
with external power supply
Simplex transmission
Functions:
Selection mm/inch
Zero setting
Min, Max, Delta memory
Selection of resolution
Analog scale range ratio
Automatic power shut down
Digital display LCD, 6 digits
Height of digits 6 mm
14.2
5
13
-
42.5
50.5
Ø 44
5
7
5.5
Ø4
-
16
18
Ø 8h6
13
-
93
-
S
8.54
0
-100
Ø 1.5
NEW!
Delivery
Ref.No. 23004004
Accessories
(optional extras):
Ref.No. 21901044
-
Ref.No.
23004034
Measuring range
mm
5
Reading
mm
0,001
Error limits
lm
4
Repeatability
lm
2
Contacting force
N
0,50-0,65
Weight
g
70
Calibration certif.
Ref.No.
71611105
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Dial Gauges DIN 878
With revolution counter
Sturdy metal housing
Standardized shank Ø 8h6
Tolerance marks
insert thread M 2.5
-
Delivery
- in case
Accessories
(optional extras):
-
Extensions
10 mm, Ref.No. 23100001
20 mm, Ref.No. 23100003
30 mm, Ref.No. 23100005
40 mm, Ref.No. 23100007
50 mm, Ref.No. 23100009
60 mm, Ref.No. 23100011
70 mm, Ref.No. 23100013
80 mm, Ref.No. 23100015
90 mm, Ref.No. 23100017
100 mm, Ref.No. 23100019
-
Ref. No. 23230001
Ref. No. 23236001
Ref.No.
23230001
23236001
Measuring span
mm
10
10
Scale divis. value
mm
0,01
0,01
Travel/1pt. revol.
mm
1
1
Housing Ø
mm
58
58
Weight
g
190
270
Calibration certif.
Ref.No.
71611102
71611102
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Dial Gauges DIN 878
Standard
Tolerance marks
insert thread M 2.5
-
Accessories
(optional extras):
-
Extensions
10 mm, Ref.No. 23100001
20 mm, Ref.No. 23100003
30 mm, Ref.No. 23100005
40 mm, Ref.No. 23100007
50 mm, Ref.No. 23100009
60 mm, Ref.No. 23100011
70 mm, Ref.No. 23100013
80 mm, Ref.No. 23100015
90 mm, Ref.No. 23100017
100 mm, Ref.No. 23100019
-
Ref. No. 23229001
Ref. No. 23229007
Ref.No.
23229001
23229002
23229007
Measuring span
mm
10
10
30
Scale divis. value
mm
0,1
0,1
0,1
Travel/1pt. revol.
mm
10
10
10
Housing Ø
mm
40
58
58
Weight
g
110
190
220
Calibration certif.
Ref.No.
71611102
71611102
71611107
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Dial Gauges DIN 878
With small measuring range
Metal functional parts and
holding fixtures
Revolution counter
Tolerance marks
insert thread M 2.5
-
Accessories
(optional extras):
-
Extensions
10 mm, Ref.No. 23100001
20 mm, Ref.No. 23100003
30 mm, Ref.No. 23100005
40 mm, Ref.No. 23100007
50 mm, Ref.No. 23100009
60 mm, Ref.No. 23100011
70 mm, Ref.No. 23100013
80 mm, Ref.No. 23100015
90 mm, Ref.No. 23100017
100 mm, Ref.No. 23100019
-
Ref. No. 23232003
Ref. No. 23232004
Ref.No.
23232003
23232004
23232005
Measuring span
mm
3
5
3
Scale divis. value
mm
0,01
0,01
0,01
Travel/1pt. revol.
mm
0,5
0,5
0,5
Housing Ø
mm
40
40
32
Weight
g
110
110
80
Calibration certif.
Ref.No.
71611102
71611102
71611102
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Dial Gauges DIN 878
With large measuring range
Revolution counter
Tolerance marks
insert thread M 2.5
-
Accessories
(optional extras):
-
Extensions
10 mm, Ref.No. 23100001
20 mm, Ref.No. 23100003
30 mm, Ref.No. 23100005
40 mm, Ref.No. 23100007
50 mm, Ref.No. 23100009
60 mm, Ref.No. 23100011
70 mm, Ref.No. 23100013
80 mm, Ref.No. 23100015
90 mm, Ref.No. 23100017
100 mm, Ref.No. 23100019
-
Ref. No. 23231001
Ref.No.
23231001
23233001
23234001
Measuring span
mm
30
50
80
Scale divis. value
mm
0,01
0,01
0,01
Travel/1pt. revol.
mm
1
1
1
Housing Ø
mm
58
58
58
Weight
g
235
370
440
Calibration certif.
Ref.No.
71611107
71611109
71611109
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Precision Dial Gauges
Precision dial gauges
Functional parts run in
sapphire bearings
Revolution counter
Tolerance marks
insert thread M 2.5
-
Accessories
(optional extras):
-
Extensions
10 mm, Ref.No. 23100001
20 mm, Ref.No. 23100003
30 mm, Ref.No. 23100005
40 mm, Ref.No. 23100007
50 mm, Ref.No. 23100009
60 mm, Ref.No. 23100011
70 mm, Ref.No. 23100013
80 mm, Ref.No. 23100015
90 mm, Ref.No. 23100017
100 mm, Ref.No. 23100019
-
Ref. No. 23238002
Ref. No. 23238001
Ref.No.
23238001
23238002
Measuring span
mm
1
1
Scale divis. value
mm
0,001
0,001
Travel/1pt. revol.
mm
0,2
0,2
Housing Ø
mm
40
58
Weight
g
115
200
Calibration certif.
Ref.No.
71611102
71611102
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Dial Gauges Special Designs
For extreme conditions
Shock-proof gearing
Revolution counter
Tolerance marks
insert thread M 2.5
-
Accessories
(optional extras):
-
Extensions
- 10 mm, Ref.No. 23100001
- 20 mm, Ref.No. 23100003
- 30 mm, Ref.No. 23100005
- 40 mm, Ref.No. 23100007
- 50 mm, Ref.No. 23100009
- 60 mm, Ref.No. 23100011
- 70 mm, Ref.No. 23100013
- 80 mm, Ref.No. 23100015
- 90 mm, Ref.No. 23100017
- 100 mm, Ref.No. 23100019
water and
oil proof
splashproof
Ref. No. 23241001
Ref. No. 23330001
water and oil-proof
Ref.No.
23241001
Measuring span
mm
10
Scale divis. value
mm
0,01
Travel/1pt. revol.
mm
1
Housing Ø
mm
61
Weight
g
280
Calibration certif.
Ref.No.
71611102
Housing Ø
mm
58
Weight
g
220
Calibration certif.
Ref.No.
71611102
splash-proof
Ref.No.
23330001
Measuring span
mm
10
Scale divis. value
mm
0,01
Travel/1pt. revol.
mm
1
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Shock-proof
Shock-proof gearing
Revolution counter
Tolerance marks
insert thread M 2.5
-
Accessories
(optional extras):
-
Extensions
- 10 mm, Ref.No. 23100001
- 20 mm, Ref.No. 23100003
- 30 mm, Ref.No. 23100005
- 40 mm, Ref.No. 23100007
- 50 mm, Ref.No. 23100009
- 60 mm, Ref.No. 23100011
- 70 mm, Ref.No. 23100013
- 80 mm, Ref.No. 23100015
- 90 mm, Ref.No. 23100017
- 100 mm, Ref.No. 23100019
Ref. No. 23230101
Ref. No. 23231101
Ref.No.
23232103
23230101
23230201
23231101
Measuring span
mm
3
10
10
30
Scale divis. value
mm
0,01
0,01
0,01
0,01
Travel/1pt. revol.
mm
0,5
1
1
1
Housing Ø
mm
40
58
58
58
Weight
g
115
200
200
230
Calibration certif.
Ref.No.
71611102
71611102
71611102
71611106
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Shock-proof with free stroke
Measuring range limited to
one pointer revolution
Shock-proof gearing
Large free stroke for easy
laying in specimen
Revolution counter
Tolerance marks
insert thread M 2.5
-
Accessories
(optional extras):
-
Extensions
- 10 mm, Ref.No. 23100001
- 20 mm, Ref.No. 23100003
- 30 mm, Ref.No. 23100005
- 40 mm, Ref.No. 23100007
- 50 mm, Ref.No. 23100009
- 60 mm, Ref.No. 23100011
- 70 mm, Ref.No. 23100013
- 80 mm, Ref.No. 23100015
- 90 mm, Ref.No. 23100017
- 100 mm, Ref.No. 23100019
with
free stroke
Ref. No. 23237001
Ref.No.
23237001
23237003
Measuring span
mm
0,8
0,16
Scale divis. value
mm
0,01
0,001
Free stroke
mm
9
5
Housing Ø
mm
58
58
Weight
g
190
300
Calibration certif.
Ref.No.
71611102
71611102
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
With magnetic back plate
Optional shock-proof
gearing
Adhesive force 18 kg
Revolution counter
Tolerance marks
insert thread M 2.5
-
Accessories
(optional extras):
-
Extensions
- 10 mm, Ref.No. 23100001
- 20 mm, Ref.No. 23100003
- 30 mm, Ref.No. 23100005
- 40 mm, Ref.No. 23100007
- 50 mm, Ref.No. 23100009
- 60 mm, Ref.No. 23100011
- 70 mm, Ref.No. 23100013
- 80 mm, Ref.No. 23100015
- 90 mm, Ref.No. 23100017
- 100 mm, Ref.No. 23100019
magnetic
back plate
Ref.No.
23241005
Measuring span
mm
10
Scale divis. value
mm
0,01
Travel/1pt. revol.
mm
1
Housing Ø
mm
58
Weight
g
380
Calibration certif.
Ref.No.
71611102
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Dial Test Indicator
DIN 2270
G
Robust design. Shape A
3 Dovetail guides
Functional parts with
ruby bearings
Stylus shaft with ball
bearings
Rotatable dial
Stylus with interchangeable
carbide ball Ø 2 mm
Swivelling range 240o
Automatic reversal of
measuring direction
E
17.5
-
øD
-
43.4
57
-
Delivery
Incl. dial test indicator
with carbide ball Ø 2 mm,
shank Ø 8 mm and key
L
-
Accessories
(optional extras):
Stylus with carbide ball
thread M 1.6 (see table)
2
-
Measuring instrument
Ref.No.
23228001
23228002
23228007
23228008
23228013
23228014
Measuring span
mm
0,8
0,8
0,5
0,5
0,2
0,2
Scale divis. value
mm
0,01
0,01
0,01
0,01
0,002
0,002
Probe length L
mm
12
12
35
35
12
12
ØD
mm
32
40
32
40
32
40
Guides
Shape A
3
3
3
3
3
3
Weight
g
130
130
120
135
120
130
Calibration certif.
Ref.No.
71611301
71611301
71611301
71611301
71611301
71611301
Measuring probes
Ref.No.
23228106
23228107
Probe length L
mm
12
12
Ball-Ø
mm
1
2
Ref.No.
23228108
23228109
Probe length L
mm
12
35
Ball-Ø
mm
3
1
Ref.No.
23228110
23228111
Probe length L
mm
35
35
Ball-Ø
mm
2
3
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Dial Test Indicator
DIN 2270
Shape A
3 Dovetail guides
Functional parts with
ruby bearings
Stylus shaft with ball
bearings
Rotatable dial
Stylus with interchangeable
carbide ball Ø 2 mm
Swivelling range 240o
Automatic reversal of
measuring direction
-
Delivery
In case
Incl. shanks
Ø 6.0 and 8.0 mm
-
Ref.No.
23228202
Measuring span
mm
0,8
Scale divis. value
mm
0,01
Probe length L
mm
12
Housing Ø
mm
30
Weight
g
120
Calibration certif.
Ref.No.
71611301
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Comparator Gauges
DIN 879
10
20
30
53
0.001 mm
30
40
50
50
108
100
40
ø8h6
33
25
-
0
18
-
10
20
ø4
M2.5
6
Comparator gauges
For comparative measurement
of external and internal
dimensions, for determination
of parallelism, evenness and
run-out.
Measuring unit shock-protected
sealed against dust, dirt and
splash water
Tolerance marks
insert thread M 2.5
9
62
Delivery
- Incl. wire lifter
Accessories
(optional extras):
Comparator gauge with
shortened measuring pin
(for bore gauges, feeler
micrometers, measuring
devices etc.) on request
-
Ref.No.
23243004
Measuring span
mm
+/-0,05
Contacting force
N
ca.1,0
Scale divis. value
mm
0,001
Free stroke
mm
3
Housing Ø
mm
62
Weight
g
220
Calibration certif.
Ref.No.
71611201
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Thickness Gauge with Dial Indicator
With light metal frame
Lifting by lever
Probe shape 1:
Ø 5 mm
for hard materials
such as metal sheet,
glass, etc.
Probe shape 4:
Ø 10 mm
for semihard materials
such as cardboard,
paper, etc.
-
-
Accessories
(optional extras):
-
Meas. probe shape 4/1
Ref.No.
Probe shape
23260016
23260018
1
4
Measuring range
mm
0-10
0-10
Frame depth
mm
50
50
Scale divis. value
mm
0,01
0,01
Weight
g
430
430
Calibration certif.
Ref.No.
71611501
71611501
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
For foils
For accurate thickness
measurement of foils.
Lifting by lever
Plastic handle for
insulation against
hand heat transfer
All moving parts
of the gauge run in
sapphire bearings
-
Ref.No.
23263001
Measuring range
mm
0-1
Frame depth
mm
30
Contacting force
N
2
Scale divis. value
mm
0,001
Travel/1pt. revol.
mm
0,2
Weight
g
420
Calibration certif.
Ref.No.
71611501
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Saw Tooth Setting Gauge
For measurement of
the saw tooth setting
for saw toothes.
Readable on both sides
Tolerance marks on
both sides
Measuring insert
Ø 10 mm
-
Ref.No.
23277001
Measuring span
mm
2,0
Scale divis. value
mm
0,1
Housing Ø
mm
40
Weight
g
170
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Caliper Gauges Digital/Analog for
Internal and External Measurements
For bores and internal grooves
Analog and Digital display
for better reading
Absolute and relative
measuring program (Preset)
Interface Digimatic
Switching mm/inch
USB interface
red / green display for
tolerance measurement
Suitable for workshop
use (IP 63)
-
NEW!
-
Delivery
- Incl. battery
- Incl. calibration certificate
NEW!
Internal Measurements
Ref.No.
23485021
23485023
23485030
Measuring range
mm
5-25
20-40
35-75
Measuring depth
mm
29
53
114
Reading
mm
0,01
0,01
0,02
Accuracy
mm
0,02
0,01
0,02
Contacting force
N
0,9-1,4
0,9-1,4
1,3-1,87
Measuring ball-Ø
mm
0,6
1,0
2,0
Max. groove depth
mm
2,2
4,0
8,0
Min. groove width
mm
1,8
2,0
4,0
External Measurements
Ref.No.
23476021
23476026
Measuring range
mm
0-20
0-40
Measuring depth
mm
50
115
Reading
mm
0,01
0,02
Accuracy
mm
0,01
0,02
Contacting force
N
0,7-1,3
1,0-1,5
Measuring ball-Ø
mm
1,5
3,0
Lgth.o.probe(1)/(2)
mm
15/15
22/22
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Caliper Gauges for External
Measurements
For thickness and external measurements
(external grooves /
wall thicknesses)
Slop and drip-proof
Dampened drive
Carbide measuring probes
Adjustable tolerance marks
Direct reading
-
Delivery
-
Ref. No. 23488020
Ref. No. 23488022
Ref. No. 23488002
Ref.No.
23483002
23488020
23488022
23488024
23488002
23488007
Measuring range
mm
0-10
0-5
0-10
0-10
0-20
0-50
Measuring depth
mm
36
28
59
59
80
170
Reading
mm
0,1
0,005
0,01
0,01
0,01
0,05
Accuracy
mm
0,1
0,01
0,02
0,02
0,03
0,05
Contacting force
N
0,3-1,3
1,2-1,7
0,8-1,3
0,8-1,3
0,9-1,5
0,9-1,5
Measuring ball-Ø
mm
2,0
1,5
1,5
1,5
1,5
2,0
Lgth.o.probe(1)/(2)
mm
5/5
7,5/7,5
8/8
8/0,9
22/22
32/32
Weight
g
160
360
360
360
220
300
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Caliper Gauges for Internal
Measurements
For measurement of grooves and
bores
Slop and drip-proof
Dampened drive
Carbide measuring probes
Adjustable tolerance marks
Direct reading
-
Delivery
-
Ref. No. 23475021
Ref. No. 23475025
Ref.No.
23475021
23475023
23475024
23475025
23475026
23470001
23470003
23470020
23470021
23470023
23470005
23470006
Measuring range Measuring depth
mm
mm
5-10
22
10-20
50
20-30
52
30-40
57
40-50
57
10-30
80
30-50
80
50-70
80
60-80
80
80-100
80
15-65
175
40-90
175
Reading
mm
0,005
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,05
0,05
Accuracy
mm
0,01
0,02
0,02
0,02
0,02
0,03
0,03
0,03
0,03
0,03
0,05
0,05
Contacting force
N
1,2-1,7
0,8-1,3
0,8-1,3
0,8-1,3
0,8-1,3
0,9-1,5
0,9-1,5
0,9-1,5
0,9-1,5
0,9-1,5
1,2-2
1,2-2
Measuring ball-Ø
mm
0,6
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,5
2,0
Lgth.o.probe(1)/(2)
mm
2,3/2,3
5/5
5/5
5/5
5/5
5/5
7/7
10/20
10/10
10/10
5,3/5,3
10,5/10,5
Max. groove depth
mm
2,2
4
4
4,5
4,5
4,5
6
6
6
6
4,5
8
Min. groove width Weight
mm
g
1,4
320
2
360
2
350
2
400
2
400
1,8
220
2,5
220
2,5
220
2,5
220
2,5
220
2,5
300
3,3
300
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Ref.No.
Measuring range Measuring depth Reading Accuracy Contacting force Measuring ball-Ø Lgth.o.probe(1)/(2) Max. groove depth Min. groove width Weight
mm
mm
mm
mm
N
mm
mm
mm
mm
g
23470008 70-120
175
0,05
0,05
1,2-2
2,0
10,5/40,5
8
3,3
350
Bore gauges
HELIO - VAR G
For large and deep bores
from 4.5 to 800 mm Ø (standard)
as well as deviations of shapes.
For display of measuring values
comparator gauges, mechanical or
electronical dial indicators or
gauge heads can be used.
Highest precision:
Deviation span max. 2. lm
thanks to special tube made of
nickel alloy, therefore almost
insensitive to heat (e.g. hand
warmth or high ambient
temperatures)
Easy handling:
Self-centering because of a
spring-loaded centering pad
and easy exchange of the
measuring extensions and discs
-
-
Delivery
- In wooden case
- Incl. measuring extensions,
-
measuring discs, centering
pads, keys for assembly,
connectors for display unit
*With measuring range extension
Without display unit/setting ring
Technical data
Range of application 4.5-290 mm
Repeatability: fw<0,5 l
Deviation span: fe<2 l
Reversal span: fu<2,5 l
Range of application 280-800 mm
Repeatability: fw<1,5 l
Deviation span: fe<3 l
Reversal span: fu<3,5 l
-
Adjustment/application
see following pages
Accessories
(optional extras):
-
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Bore gauges
with measuring pin steel
Ref.No.
23217005
23217006
23217008*
23217009
23217010*
23217011
23217012*
23217013
23217014*
23217015
Measuring range (D)
mm
18-35
35-60
50-150
100-160
100-230
160-290
160-360
280-410
280-510
400-800
Meas. depth (MT)
mm
110
138
177
234
234
234
234
400
400
700
Measuring span (s)
mm
1,3
1,3
1,4
1,6
1,6
1,6
1,6
2,6
2,6
2,6
Face size (h)
mm
5,4
7,0
8,5
11,5
11,5
11,5
11,5
16,0
16,0
17,5
Meas. extensions
Number
9
7
11
7
7
7
7
7
7
11
Measuring discs
Number
2
2
3
4
4
4
4
4
4
4
Weight
g
900
900
1200
2300
2300
3800
3800
6000
6000
10500
Calibration certif.
Ref.No.
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
Measuring discs
Number
1
2
2
3
3
4
4
4
4
4
4
4
Weight
g
450
450
450
1000
900
900
1200
1200
2300
2300
3800
3800
6000
6000
10500
Calibration certif.
Ref.No.
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
71611701
with measuring pin carbide
Ref.No.
23217101
23217102
23217103
23217104
23217105
23217106
23217107
23217108*
23217109
23217110*
23217111
23217112*
23217113
23217114*
23217115
Measuring range (D)
mm
4,5-6
6-8
8-12
12-20
18-35
35-60
50-100
50-150
100-160
100-230
160-290
160-360
280-410
280-510
400-800
Meas. depth (MT)
mm
80
100
100
110
110
138
177
177
234
234
234
234
400
400
700
Measuring span (s)
mm
0,35
0,5
0,7
0,9
1,3
1,3
1,4
1,4
1,6
1,6
1,6
1,6
2,6
2,6
2,6
Face size (h)
mm
2,0
2,6
3,25
4,5
5,4
7,0
8,5
8,5
11,5
11,5
11,5
11,5
16,0
16,0
17,5
Meas. extensions
Number
9
7
9
9
9
7
11
11
7
7
7
7
7
7
11
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Bore Gauges - Adjustment / Application
Adjustment of HELIO - VAR G
The adjustment is made by
means of setting rings,
gauges, micrometers,
setting instruments
(see below) or the
HELIO - LINEAR
(see chapter 6)
30.000
3
32.1
3
3.25
57
Axial centering is
obtained by swinging in
the bore (see sketch)
Applications
Measurement of
Barrel shape
Taper
Enlarged opening
Oval bores
Round bores
-
Centering
Accessories
(optional extras):
Setting devices
For setting bore gauges
of different measuring
ranges.
Gauge blocks are used
as material measure.
Delivery in wooden case
-
-
Setting device
Setting devices
Ref.No.
23219001
Setting range
mm
4,5-160
Weight
kg
5,1
Ref.No.
23219002
Setting range
mm
35-290
Weight
kg
5,8
Ref.No.
23219003
Setting range
mm
160-510
Weight
kg
6,1
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Bore Gauges
HELIO - VAR
Self-centering two-point bore
gauge for determination of
diameter and geometry
errors on bores.
Reception bore Ø 8 H6
Ref. No. 23216001
-
Fields of use / application
Both in the production area as
well as incoming material control
or the calibration laboratory.
For measurement of
Barrel shape
Taper
Enlarged opening
Oval bores
Round bores
(see sketches)
-
Centering
Bell mouth
Indicating instruments are
chosen in accordance with
the accuracy required.
All mechanical dial gauges,
comparator gauges, digital
indicators or gauge heads with
a shank Ø 8 H6 can be used.
Adjustment
Is made by means of setting
rings, micrometers, snap gauges,
gauge blocks or with the single
axis measuring instrument
HELIO - LINEAR (see chapter 6).
Delivery
In wooden case
With gauge heads, drive pins,
holder for indicating instrument
Without comparator or dial
gauge
-
Accessories
(optional extras):
for each gauge head and
for setting rings
Setting rings-sets
-
Barrel shape
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Bore Gauges
Standard gauge heads
Ref.No.
23216001
23216002
23216003
23216004
23216005
Measuring range
mm
0,47-0,97
0,95-1,55
1,50-3,95
3,70-9,80
9,40-20,60
Gauge heads
Number
6
5
9
12
11
Max. meas. depth
mm
1,5/3
11
12/22
40/50
50/90
Weight
g
700
700
800
1150
1500
Calibration certif.
Ref.No.
71611601
71611601
71611601
71611601
71611601
Weight
g
1150
2100
Calibration certif.
Ref.No.
71611601
71611601
Carbide gauge heads
Ref.No.
23216102
23216103
Measuring range
mm
3,70-9,80
9,40-20,60
Gauge heads
Number
12
11
Max. meas. depth
mm
40/50
50/90
Setting rings - sets
Ref.No.
23216570
23216571
23216572
23216573
23216574
Size
mm
0,5-0,9
1,0-1,4
1,75-3,75
4,0-9,5
10,0-20,0
Size of set
Piece
6
5
9
12
11
Calibration certif.
Ref.No.
71640350
71640351
71640352
71640353
71640354
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Bore Gauges - Accessories
Rapid gauge stand for HELIO - VAR
Ref.No. 23275001
Simplifies accurate and
rapid measurements on
small workpieces.
Due to the vertical
clamping with regard to the
gauge stand, no swinging
movement is necessary.
Stroke of gauge stand 0-40 mm
Height adjustment of the
measuring column 80 mm
Measuring table Ø 58 mm
Prismatic stop, stop bolt
-
Floating support
for the rapid gauge
Ref.No. 23275002
Allows the rapid centering
of the HELIO - VAR and
guarantees a correct
position and repetitive
accuracy, when inserting
in the bore.
Weight 170 g
-
Example of application
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Depth Gauge Digital
TIEFMATIC
For rapid and accurate depth
measurements.
Interface RS232C
2 Measuring value storages
insert
-
Delivery
In box
Incl. 4 extensions
Incl. standard meas. insert
Ref.No. 23170104
Ref.No. 23004004
-
Accessories
(optional extras):
Ref. No. 21901067
Calibration certificate for
TIEFMATIC
Calibration certificate for
extensions
Ref.No. 71610501
-
Depth stop extensions
(only for Ref.No. 23170002
possible)
Extension 200 mm
Ref. No. 23170110
Extension 300 mm
Ref. No. 23170111
-
see following page
with adaptor 4/48“ - M 2.5
Ref.No. 23170109
also suited for measuring
inserts see last inner cover
(max. Ø 5.0 mm)
-
Ref.No.
23170001
23170002
Measuring range
mm
0-300
0-300
Measuring span
mm
30
30
Reading
mm
0,01/0,001
0,01/0,001
Depth stop length
mm
65
100
Error limits
lm
8
8
Repeatability
lm
1
1
Weight
g
860
920
Calibration certif.
Ref.No.
71610401
71610401
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Depth Gauge Digital - Accessories
Measuring inserts 4/48“
for TIEFMATIC
Different ball Ø
Ball laterally Ø 2 mm
Ref.No. 23170101
Ball laterally Ø 4 mm
Ref.No. 23170102
4/48''
4/48''
-
øD
12.5
-
ø3
10
Lateral ball
R1
.5
Standard insert
Needle insert
Ref.No. 23170103
4/48''
4/48''
9.5
Flat insert
Ref.No. 23170105
ø12,7
10
Flat insert
ø2
Needle insert
Extensions
Length 25.4 mm
Ref.No. 23170106
Length 50.8 mm
Ref.No. 23170107
Length 101.6 mm
Ref.No. 23170108
4/48''
4/48''
-
L
M2.5
with adaptor 4/48“ - M 2.5
Ref.No. 23170109
also suited for measuring
inserts see last inner cover
-
4/48''
ø4.5
Extension
Adaptor
12.7
-
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Depth Micrometers
rods
dull-chromed
Spindle made of chrome
vanadium steel, hardened
Clamping ring
Interchangeable measuring rods
increments 25 mm, Ø 4.3 mm
Measuring surface hardened
and lapped, 100x15 mm
by ratchet
-
Delivery
- In wooden case
- Incl. measuring rods
- Incl. setting key
Accessories
(optional extras):
for micrometer
for each measuring rod
Ref.No. 71610501
-
Ref.No.
22181004
22181005
22181006
Measuring range
mm
0-100
0-150
0-300
Measuring span
mm
25
25
25
Reading
mm
0,01
0,01
0,01
Thimble - Ø
mm
17
17
17
Drive pins
Number
4
6
12
Weight
g
620
650
850
Calibration certif.
Ref.No.
71610401
71610401
71610401
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Depth Gauges with Dial Indicator
With measuring pins
For measurement of depths
of bores, projections and
recesses.
Dial indicator with
anticlockwise rotation
Measuring range can
be increased by using
extensions
Depth stop hardened
Measuring surface prec.
lapped 80x16 mm
insert thread M 2.5
-
Accessories
(optional extras):
-
Ref.No.
23223001
23223003
23223002
Measuring range
mm
0-10
0-30
0-100
Measuring span
mm
10
30
10
Extensions
mm
10/20/30/40
Scale divis. value
mm
0,01
0,01
0,01
Travel/1pt. revol.
mm
1
1
1
Weight
g
480
490
450
Calibration certif.
Ref.No.
71900014
71900014
71900014
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Crankshaft Tester with Dial Indicator
Crankshaft tester
For measurement of crankshafts
and crankshaft bearings of
car engines, marine engines, etc.
Fields of use
In crankshaft grinding plants,
repair shops and in the
assembly of engines.
Application
Testing is made with the engine
or compressor ready to run or
after assembly, with connecting
rods fitted or not.
Besides that also possible on the
crankshaft dismantled from the
engine and mounted between
centers.
Delivery
In wooden case
Incl. dial indicator
-
Accessories
(optional extras):
-
Ref.No.
23221001
23221002
23221003
Measuring range
mm
45-150
60-300
60-500
Scale divis. value
mm
0,01
0,01
0,01
Weight
kg
1,0
1,2
1,3
Calibration certif.
Ref.No.
71900014
71900014
71900014
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Gauge Stands
With magnetic base
For precise testing of
concentricity, parallelism,
thickness etc. on workpieces.
Magnet can be switched
on and off
Foot with prismatic base
Chrome-plated stem
Swivelling and tiltable arm
with clamping device
Fine adjustment on dial
gauge holder
-
Ref. No. 23255001
Ref. No. 23255201
Ref.No.
23255001
23255002
23255201
Magnetic base LxWxH
mm
65x70x46
80x75x60
50x65x55
Measuring height
mm
290
500
140
Column -Ø
mm
16
20
12
Rigid arm - Ø
mm
16
16
10
Adhesive force
N
600
800
600
Reception
mm
8 H8
8 H8
8 H6
Weight
kg
2,4
5,0
1,5
Measuring height
mm
430
Column -Ø
mm
17
Rigid arm - Ø
mm
17
Adhesive force
N
450
Reception
mm
8 H7
Weight
kg
2,1
With magnetic base
concentricity, parallelism,
thickness etc. on workpieces.
Magnet can be switched
on and off
Clamping by only one
clamp handle
Fine adjustment on dial
gauge holder
Combined reception for
dial gauge, comparator
gauge, measuring probes
with shank Ø 8 H7 or dial
test indicators with dovetail
-
Ref.No.
23130001
Magnetic base LxWxH
mm
70x46x65
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Gauge Stands
With rigid arm
length, parallelism and
thickness on small
workpieces.
Heavy ribbed cast iron base
with three-point support
Table plate hardened
and precision-ground,
with dust grooves
Table surface 65 x 65 mm
Measuring column ground
and chromed, with helical
thread and nut
Shank Ø 8 H6 for dial gauges,
comparator gauges or electronic
measuring instruments
-
Ref.No.
23252005
Measuring height
mm
80
Column -Ø
mm
26
Arm reach
mm
55
Reception
mm
8 H6
Weight
kg
3,7
Column -Ø
mm
22
Arm reach
mm
50
Reception
mm
8 H6
Weight
kg
2,3
With rigid arm
length, parallelism and
thickness on small
workpieces.
With rigid arm
Table plate hardened
and lapped
Shank Ø 8 H6 for dial
gauges, comparator gauges
or electronic measuring
instruments
Table Ø 50 mm
-
Ref.No.
23252002
Measuring height
mm
100
4
4
Dial Gauges,
Bore Gauges,
Depth Gauges,
Gauge Stands
Magnetic Holders for Dial Gauges
With flat base
Ref.No. 23246001
With pivotable arm
Dimensions
70 x 35 x 10 mm
Shank Ø 8 H6
Weight 200 g
-
Delivery
Without dial gauge
-
Ref. No. 23246001
With prismatic base
Ref.No. 23246002
With pivotable arm
Dimensions
70 x 35 x 25 mm
Shank Ø 8 H6
Weight 310 g
-
Delivery
Without dial gauge
-
Ref. No. 23246002
Inspection Gauges,
Fixed Gauges,
Testing Equipment Surveillance
Universal Protractor
With magnifier
Vernier reading with fine
adjustment
Scale and reading parts
dull-chromed
Wide-angle magnifier
Graduation of base plate
4 x 90o
-
Delivery
In wooden case
-
Accessories
(optional extras):
-
Ref.No.
Read. angular min.
5o
Weight
g
430
Calibration certif.
Ref.No.
71611001
24149001
24149002
mm
mm
5o
470
71611001
24149003
mm
5
5
Inspection Gauges,
Fixed Gauges,
Ref.No.
Read. angular min.
5o
570
71611001
780
71611001
Weight
g
24149004
mm
Calibration certif.
Ref.No.
5o
Inspection Gauges,
Fixed Gauges,
Protractors
Accuracy 1/2 degree
Locking screw
Available in dull-chromed
or blank design
-
Accessories
(optional extras):
-
dull-chromed
Ref.No.
24150101
24150102
24150103
24150104
Measuring range
Angle
0-180o
0-180o
0-180o
0-180o
Protractor - Ø
mm
80
120
150
200
Rail length
mm
120
150
200
300
Reading
Angle
1o
1o
1o
1o
Weight
g
100
160
245
410
Calibration certif.
Ref.No.
71612001
71612001
71612001
71612001
Reading
Angle
1o
1o
1o
1o
Weight
g
100
160
245
410
Calibration certif.
Ref.No.
71612001
71612001
71612001
71612001
blank
Ref.No.
24150001
24150002
24150003
24150004
Measuring range
Angle
0-180o
0-180o
0-180o
0-180o
Protractor - Ø
mm
80
120
150
200
Rail length
mm
120
150
200
300
5
5
Inspection Gauges,
Fixed Gauges,
Squares for Inspection purposes and
Workshop Use
Flat squares
Stainless steel, unhardened
or special steel
Accuracy 0/1/2
Squareness, parallelism
and planeness acc. to DIN 875
-
Accessories
(optional extras):
Wooden case
-
Stainless steel
Ref.No.
24410002
24410003
24410004
24410005
24410102
24410103
24410104
24410105
Rail length
mm
75x50
100x70
150x100
200x130
75x50
100x70
150x100
200x130
Cross section
mm
15x5
20x5
25x5
30x6
15x5
20x5
25x5
30x6
Accuracy
0
0
0
0
1
1
1
1
Net weight
g
60
100
200
400
60
100
200
400
Wooden case
Ref.No.
21912239
21912240
21912241
21912242
21912239
21912240
21912241
21912242
Calibration certif.
Ref.No.
71620302
71620303
71620304
71620305
71620302
71620303
71620304
71620305
Net weight
g
60
100
200
400
60
100
200
400
60
100
200
400
Wooden case
Ref.No.
21912239
21912240
21912241
21912242
21912239
21912240
21912241
21912242
21912239
21912240
21912241
21912242
Calibration certif.
Ref.No.
71620302
71620303
71620304
71620305
71620302
71620303
71620304
71620305
71620302
71620303
71620304
71620305
Special steel
Ref.No.
24400002
24400003
24400004
24400005
24400102
24400103
24400104
24400105
24400202
24400203
24400204
24400205
Rail length
mm
75x50
100x70
150x100
200x130
75x50
100x70
150x100
200x130
75x50
100x70
150x100
200x130
Cross section
mm
15x5
20x5
25x5
30x6
15x5
20x5
25x5
30x6
15x5
20x5
25x5
30x6
Accuracy
0
0
0
0
1
1
1
1
2
2
2
2
Workshop Use
Inspection Gauges,
Fixed Gauges,
Back squares
Stainless steel, unhardened
or special steel
Accuracy 0/1/2
Squareness, parallelism
and planeness acc. to DIN 875
-
Accessories
(optional extras):
Wooden case
-
Stainless steel
Ref.No.
24510002
24510003
24510004
24510005
24510102
24510103
24510104
24510105
24500003
24500004
24500005
24500102
24500103
24500104
24500105
24500202
24500203
24500204
24500205
Rail length
mm
75x50
100x70
150x100
200x130
75x50
100x70
150x100
200x130
100x70
150x100
200x130
75x50
100x70
150x100
200x130
75x50
100x70
150x100
200x130
Cross section
mm
15x5
20x5
25x5
30x6
15x5
20x5
25x5
30x6
20x5
25x5
30x6
15x5
20x5
25x5
30x6
15x5
20x5
25x5
30x6
Accuracy
0
0
0
0
1
1
1
1
0
0
0
1
1
1
1
2
2
2
2
Net weight
g
90
160
300
600
90
160
300
600
160
300
600
90
160
300
600
90
160
300
600
Wooden case
Ref.No.
21912248
21912249
21912250
21912251
21912248
21912249
21912250
21912251
21912249
21912250
21912251
21912248
21912249
21912250
21912251
21912248
21912249
21912250
21912251
Calibration certif.
Ref.No.
71620302
71620303
71620304
71620305
71620302
71620303
71620304
71620305
71620303
71620304
71620305
71620302
71620303
71620304
71620305
71620302
71620303
71620304
71620305
5
5
Inspection Gauges,
Fixed Gauges,
Bevel Edge Squares DIN 875
With two bevel edges
Accuracy 00, i.e.
highest accuracy, squareness,
parallelism and planeness
Squareness:
(2+L/100)lm, L = mm
Hardened
Test faces lapped
-
Accessories
(optional extras):
Wooden case
-
Stainless steel
Ref.No.
24610001
24610002
24610003
24610004
24610005
Rail length
mm
50x40
75x50
100x70
150x100
200x130
Cross section
mm
13x4
14x4
20x5
26x6
32x7
Net weight
g
30
55
120
290
460
Wooden case
Ref.No.
21912238
21912239
21912240
21912241
21912242
Calibration certif.
Ref.No.
71620401
71620401
71620401
71620402
71620402
Wooden case
Ref.No.
21912238
21912239
21912240
21912241
21912242
Calibration certif.
Ref.No.
71620401
71620401
71620401
71620402
71620402
Special steel
Ref.No.
24600001
24600002
24600003
24600004
24600005
Rail length
mm
50x40
75x50
100x70
150x100
200x130
Cross section
mm
13x4
14x4
20x5
26x6
32x7
Net weight
g
30
55
120
290
460
Inspection Gauges,
Fixed Gauges,
Knife-Edge Straightedges DIN 874
Accuracy 00
Measuring edges
precision-ground
and lapped
Insulation against
hand heat transfer
Blackened measuring
surfaces for better contrast
-
Accessories
(optional extras):
Wooden case
-
Ref. No. 24346101
Stainless steel
Ref.No.
24346101
24346102
24346103
24346104
24346105
24346106
24346107
24346108
24346109
Length
mm
50
75
100
125
150
200
300
400
500
Net weight
g
35
50
75
90
115
200
415
740
980
Wooden case
Ref.No.
21912219
21912219
21912220
21912222
21912222
21912223
21912224
21912225
21912226
Calibration certif.
Ref.No.
71620101
71620101
71620101
71620101
71620101
71620101
71620102
71620102
71620102
Wooden case
Ref.No.
21912219
21912219
21912220
21912222
21912222
21912223
21912224
21912225
21912226
Calibration certif.
Ref.No.
71620101
71620101
71620101
71620101
71620101
71620101
71620102
71620102
71620102
Special steel
Ref.No.
24346001
24346002
24346003
24346004
24346005
24346006
24346007
24346008
24346009
Length
mm
50
75
100
125
150
200
300
400
500
Net weight
g
35
50
75
90
115
200
415
740
980
5
5
Inspection Gauges,
Fixed Gauges,
Measuring tool set 5 parts
Ref.No. 24620102
Special steel, hardened
Measuring surfaces lapped
Weight 420 g
-
Contents
1 Knife-edge
straightedge 100 mm
1 Bevel edge square
with two bevel edges
75 x 50 mm
1 Bevel edge square
with one inside bevel
edge 25 x 20 mm
1 Bevel edge square
with one inside bevel
edge 40 x 28 mm
1 Gauge block scriber
point 60 x 9 x 9 mm
-
Delivery
- In wooden case
Accessories
(optional extras):
Ref.No. 71900014
-
Measuring Tool Set
Inspection Gauges,
Fixed Gauges,
Precision Levels
Sensitivity acc. to DIN 877
Precision level
Precision-ground V-groove
base
Housing made of special
cast iron
With parallel and cross vial
Parallel vial made of ground
special glass
Protection glass over vial
heat transfer
-
Delivery
In wooden case
-
Accessories
(optional extras):
-
Ref.No.
24335101
24335102
24335301
24335302
Scale division
mm/m
0,02
0,02
0,1
0,1
Length
mm
160
200
160
200
Weight
kg
1,2
1,5
1,2
1,5
Calibration certif.
Ref.No.
71900014
71900014
71900014
71900014
Sensitivity acc. to DIN 877
Special light alloy level
For levelling and ajsuting
operations on surfaces
and cylinders.
V-groove base
-
Accessories
(optional extras):
-
Ref.No.
24336001
24336003
Scale divis. value
mm
0,6
0,6
Length
mm
100
200
Weight
g
100
175
Calibration certif.
Ref.No.
71900014
71900014
5
5
Inspection Gauges,
Fixed Gauges,
V-Blocks and Magnetic V-Blocks
Hardened V-blocks with clamps
For machining and checking of
cylindrical workpieces of up to
approx. Ø 70 mm.
Parallelism of V-face to
base face for:
Class 00 = 0.002 mm,
precision-ground and lapped
Class 0 = 0.004 mm,
precision-ground
With two different 90o
V-blocks
-
-
Delivery
- In pairs
Accessories
(optional extras):
Wooden case
-
Accuracy 00
Ref.No.
24363001
24363002
24363003
LengthxWidthxHeight
mm
50x40x40
75x55x55
100x75x75
for shaft - Ø
mm
5-30
6-50
7-70
Weight
kg
1,1 je Paar
3,1 je Paar
6,1 je Paar
Wooden case
Ref.No.
21912235
21912236
21912237
Calibration certif.
Ref.No.
71900014
71900014
71900014
Weight
kg
1,1 je Paar
3,1 je Paar
6,1 je Paar
Wooden case
Ref.No.
21912235
21912236
21912237
Calibration certif.
Ref.No.
71900014
71900014
71900014
Accuracy 0
Ref.No.
24363101
24363102
24363103
LengthxWidthxHeight
mm
50x40x40
75x55x55
100x75x75
for shaft - Ø
mm
5-30
6-50
7-70
Inspection Gauges,
Fixed Gauges,
With on-off magnets
The workpiece is held in a
ground and lapped 90o
V-block.
Clamping of cylindrical
and square workpieces
is possible.
Special steel, hardened
Precision-ground
Accuracy 0.004 mm
-
Delivery
- In wooden case
Accessories
(optional extras):
-
Magnetic V-blocks
Ref.No.
24366101
24366102
LengthxWidthxHeight
mm
80x67x96
100x70x96
for shaft - Ø
mm
6-66
6-70
Adhesive force in N
V-block
390
880
Adhesive force in N
Surface
390
1750
Weight
kg
1,0
4,3
Calibration certif.
Ref.No.
71900014
71900014
5
5
Inspection Gauges,
Fixed Gauges,
Granite Surface Plates
Planeness acc. to DIN 876
Made of high-grade granite
Hard and resistant to wear
Expansion 7.5x10(-6)
Acid-proof
Antiglare
-
Delivery
- With carrier
Accessories
(optional extras):
T-Slot
acc. to customer’ s desire
on request
Accuracy acc. to DIN 650
nominal size 14 H7
Rail stainless steel,
dull-chromed
On request, T-slot can be
bolted to the granite service
plate
-
Surface plate with profile steel frame
14H7
-
Adjusting feets for alignment
of surface plates
Ref.No. 24393103
Ø 60 mm
Adjusting range 90-120 mm
Adjusting spindle M 27x1,5
Weight approx. 1.4 kg
-
40
9 +2
-
25 +2
0.5
Profile steel frame
Welded profile steel
construction with adjusting
spindles for alignment of the
surface plate
Delivery by carrier
23 +2
40
T-slot
Accuracy 00
Ref.No.
24394001
24394007
24394010
24394013
24394016
Dimensions
mm
250x250x50
400x250x50
400x400x50
500x400x90
600x500x100
Weight
kg
10
15
24
54
90
Ref.No.
24394019
24394022
24394025
24394028
24394031
Dimensions
mm
630x400x70
630x630x70
800x600x120
1000x630x100
1000x600x140
Weight
kg
53
83
173
189
252
Ref.No.
24394034
24394037
24394040
24394046
24394049
Dimensions
mm
1000x1000x100
1000x1000x160
1200x800x160
1600x1000x160
2000x1000x220
Weight
kg
300
480
460
768
1320
Dimensions
mm
1000x1000x100
Weight
kg
300
Accuracy 0
Ref.No.
24394101
Dimensions
mm
250x250x50
Weight
kg
10
Ref.No.
24394119
Dimensions
mm
630x400x70
Weight
kg
53
Ref.No.
24394134
Inspection Gauges,
Fixed Gauges,
Accuracy 0
Ref.No.
24394107
24394110
Dimensions
mm
400x250x50
400x400x50
Weight
kg
15
24
24394113
24394116
500x400x90
600x500x100
54
90
Ref.No.
24394122
24394125
Dimensions
mm
630x630x70
800x600x120
Weight
kg
83
173
24394128
24394131
1000x630x100
1000x600x140
Ref.No.
24394137
24394140
Dimensions
mm
1000x1000x160
1200x800x160
Weight
kg
480
460
189
252
24394146
24394149
1600x1000x160
2000x1000x220
768
1320
Weight
kg
53
83
173
189
252
Ref.No.
Dimensions
mm
1000x1000x100
1000x1000x160
1200x800x160
1600x1000x160
2000x1000x220
Weight
kg
300
480
460
768
1320
Dimensions
mm
1600x1000
2000x1000
Weight
kg
45
48
Accuracy 1
Ref.No.
24394201
24394207
24394210
24394213
24394216
Dimensions
mm
250x250x50
400x250x50
400x400x50
500x400x90
600x500x100
Weight
kg
10
15
24
54
90
Ref.No.
24394219
24394222
24394225
24394228
24394231
Dimensions
mm
630x400x70
630x630x70
800x600x120
1000x630x100
1000x600x140
24394234
24394237
24394240
24394246
24394249
Profile steel frame
Ref.No.
24393003
24393006
24393008
Dimensions
mm
630x400
630x630
800x600
Weight
kg
20
21
24
Ref.No.
24393013
24393016
24393019
Dimensions
mm
1000x630
1000x1000
1200x800
Weight
kg
32
36
36
Ref.No.
24393022
24393025
5
5
Inspection Gauges,
Fixed Gauges,
Fully cylindrical
For checking bores for
GO and NO GO.
Gauge steel, hardened
Dimensions acc. to DIN
2245/2246/2247
Accuracy acc. to DIN 7162/7164
-
Limit Plug Gauges
Special measures
available
-
Accessories
(optional extras):
-
Additional dimensions
on request
Fit H7
Ref.No.
25010001
25010002
25010003
25010004
25010005
25010006
25010007
25010008
25010009
25010010
25010011
25010012
25010013
25010014
25010015
25010016
25010017
25010018
25010019
25010020
25010021
25010022
25010023
Nominal size
mm
2
2,2
2,5
2,8
3
3,5
4
4,5
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Calibration certif.
Ref.No.
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
Ref.No.
25010024
25010025
25010026
25010027
25010028
25010029
25010030
25010031
25010032
25010033
25010034
25010035
25010036
25010037
25010038
25010039
25010040
25010041
25010042
25010043
25010044
25010045
25010046
Nominal size
mm
20
21
22
23
24
25
26
27
28
30
32
33
34
35
36
37
38
40
42
44
45
46
47
Calibration certif.
Ref.No.
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
71640101
Ref.No.
25010047
25010048
25010049
25010050
25010051
25010052
25010053
25010054
25010055
25010056
25010057
25010058
25010059
25010060
25010061
25010062
25010063
25010064
25010065
25010066
25010067
25010068
Nominal size
mm
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
88
90
92
95
98
100
Calibration certif.
Ref.No.
71640101
71640101
71640102
71640102
71640102
71640102
71640102
71640102
71640102
71640102
71640102
71640102
71640103
71640103
71640103
71640103
71640103
71640103
71640103
71640103
71640103
71640103
Inspection Gauges,
Fixed Gauges,
Plain Ring Gauges / Setting Gauges
DIN 2250-C
Setting rings
Gauge steel
Hardened and lapped
-
Accessories
(optional extras):
-
Ring gauges GO and NO GO
on request
Special measures
available
on request
Setting rings
Ref.No.
25015003
25015004
25015005
25015006
25015007
25015008
25015009
25015010
25015011
25015012
25015013
25015014
25015015
25015016
25015017
25015018
25015019
25015020
25015021
25015022
25015023
25015024
25015025
25015026
25015027
25015028
25015029
25015030
25015031
25015032
25015033
25015034
25015035
25015036
25015037
Nominal size
to mm
1,5
1,8
2
2,2
2,5
2,8
3
3,5
4
4,5
5
6
7
8
8,5
9
10
11
12
12,5
13
14
15
16
17
17,5
18
19
20
21
22
23
24
25
26
Calibration certif.
Ref.No.
71640301
71640301
71640301
71640301
71640301
71640301
71640301
71640301
71640301
71640301
71640301
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
Ref.No.
25015038
25015039
25015040
25015041
25015042
25015043
25015044
25015045
25015046
25015047
25015048
25015049
25015050
25015051
25015052
25015053
25015054
25015055
25015056
25015057
25015058
25015059
25015060
25015061
25015062
25015063
25015064
25015065
25015066
25015067
25015068
25015069
25015070
25015071
25015072
Nominal size
to mm
27
28
30
32
33
34
35
36
37
38
40
42
44
45
46
47
48
50
52
55
58
60
62
65
68
70
72
75
78
80
82
85
88
90
92
Calibration certif.
Ref.No.
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640302
71640303
71640303
71640303
71640303
71640303
71640303
71640303
71640303
71640303
71640303
71640303
71640303
71640303
71640303
71640303
71640303
71640303
Ref.No.
25015073
25015074
25015075
25015076
25015077
25015078
25015079
25015080
25015081
25015082
25015083
25015084
71640304
25015086
25015087
25015088
25015089
25015090
25015091
25015092
25015093
25015094
25015095
25015096
25015097
25015098
25015099
25015100
25015101
25015102
25015103
25015104
25015105
25015106
25015107
Nominal size
to mm
95
98
100
105
110
115
120
130
79
135
140
145
150
155
160
165
170
175
180
185
190
195
200
210
220
230
240
250
260
270
280
290
300
310
315
Calibration certif.
Ref.No.
71640303
71640303
71640303
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640304
71640305
71640305
71640305
71640305
71640305
71640306
71640306
71640306
71640306
71640306
71640307
71640307
5
5
Inspection Gauges,
Fixed Gauges,
Thread Plug Gauges
ISO metric coarse-pitch thread
DIN 13
Limit thread plug gauge
Made of gauge steel
-
Special measures
available
Accessories
(optional extras):
-
on request
Additional threads
on request
Thread plug gauges ISO metric
Ref.No.
25200001
25200002
25200003
25200004
25200005
25200006
25200007
25200008
25200009
25200010
25200011
25200012
25200013
25200015
25200017
25200019
25200020
25200021
25200022
25200023
25200024
25200025
25200026
25200027
25200028
25200029
25200030
Thread nominal - Ø
Tol.
M1 5H
M1,2 5H
M1,4 5H
M1,6 6H
M1,8 6H
M2 6H
M2,2 6H
M2,5 6H
M3 6H
M3,5 6H
M4 6H
M5 6H
M6 6H
M8 6H
M10 6H
M12 6H
M14 6H
M16 6H
M18 6H
M20 6H
M22 6H
M24 6H
M27 6H
M30 6H
M33 6H
M36 6H
M39 6H
Pitch
mm
(x0,25)
(x0,25)
(x0,3)
(x0,35)
(x0,35)
(x0,4)
(x0,45)
(x0,45)
(x0,5)
(x0,6)
(x0,7)
(x0,8)
(x1)
(x1,25)
(x1,5)
(x1,75)
(x2)
(x2)
(x2,5)
(x2,5)
(x2,5)
(x3)
(x3)
(x3,5)
(x3,5)
(x4)
(x4)
Calibration certif.
Ref.No.
71650101
71650101
71650101
71650101
71650101
71650101
71650101
71650101
71650101
71650102
71650102
71650102
71650102
71650102
71650102
71650102
71650102
71650102
71650102
71650102
71650103
71650103
71650103
71650103
71650103
71650103
71650103
Inspection Gauges,
Fixed Gauges,
Thread Ring Gauges
DIN 13
Thread ring gauges GO
Made of gauge steel
-
Accessories
(optional extras):
-
on request
Special measures
available
Additional threads
on request
Thread ring gauges Go
Ref.No.
25203001
25203002
25203003
25203004
25203005
25203006
25203007
25203008
25203009
25203010
25203011
25203012
25203013
25203015
25203017
25203019
25203020
25203021
25203022
25203023
25203024
25203025
25203026
25203027
25203028
25203029
25203030
25203031
25203032
25203034
25203035
25203036
25203037
25203038
Thread nominal - Ø
Tol.
M1,0 6h
M1,2 6h
M1,4 6h
M1,6 6g
M1,8 6g
M2,0 6g
M2,2 6g
M2,5 6g
M3 6g
M3,5 6g
M4 6g
M5 6g
M6 6g
M8 6g
M10 6g
M12 6g
M14 6g
M16 6g
M18 6g
M20 6g
M22 6g
M24 6g
M27 6g
M30 6g
M33 6g
M36 6g
M39 6g
M42 6g
M45 6g
M52 6g
M56 6g
M60 6g
M64 6g
M68 6g
Pitch
mm
(x0,25)
(x0,25)
(x0,3)
(x0,35)
(x0,35)
(x0,4)
(x0,45)
(x0,45)
(x0,5)
(x0,6)
(x0,7)
(x0,8)
(x1)
(x1,25)
(x1,5)
(x1,75)
(x2)
(x2)
(x2,5)
(x2,5)
(x2,5)
(x3)
(x3)
(x3,5)
(x3,5)
(x4)
(x4)
(x4,5)
(x4,5)
(x5)
(x5,5)
(x5,5)
(x6)
(x6)
Calibration certif.
Ref.No.
71650301
71650301
71650301
71650301
71650301
71650301
71650301
71650301
71650302
71650302
71650302
71650302
71650302
71650302
71650302
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650304
71650304
5
5
Inspection Gauges,
Fixed Gauges,
Thread Ring Gauges
DIN 13
Thread ring gauges NO GO
Made of gauge steel
-
Accessories
(optional extras):
-
on request
Special measures
available
Additional threads
on request
Thread ring gauges No Go
Ref.No.
25204001
25204002
25204003
25204004
25204005
25204006
25204007
25204008
25204009
25204010
25204011
25204012
25204013
25204015
25204017
25204019
25204020
25204021
25204022
25204023
25204024
25204025
25204026
25204027
25204028
25204029
25204030
25204031
25204032
25204033
25204034
25204035
25204036
25204037
25204038
Thread nominal - Ø
Tol.
M1 h6
M1,2 6h
M1,4 6h
M1,6 6g
M1,8 6g
M2 6g
M2,2 6g
M2,5 6g
M3 6g
M3,5 6g
M4 6g
M5 6g
M6 6g
M8 6g
M10 6g
M12 6g
M14 6g
M16 6g
M18 6g
M20 6g
M22 6g
M24 6g
M27 6g
M30 6g
M33 6g
M36 6g
M39 6g
M42 6g
M45 6g
M48 6g
M52 6g
M56 6g
M60 6g
M64 6g
M68 6g
Pitch
mm
(x0,25)
(x0,25)
(x0,3)
(x0,35)
(x0,35)
(x0,4)
(x0,45)
(x0,45)
(x0,5)
(x0,6)
(x0,7)
(x0,8)
(x1)
(x1,25)
(x1,5)
(x1,75)
(x2)
(x2)
(x2,5)
(x2,5)
(x2,5)
(x3)
(x3)
(x3,5)
(x3,5)
(x4)
(x4)
(x4,5)
(x4,5)
(x5)
(x5)
(x5,5)
(x5,5)
(x6)
(x6)
Calibration certif.
Ref.No.
71650301
71650301
71650301
71650301
71650301
71650301
71650301
71650301
71650302
71650302
71650302
71650302
71650302
71650302
71650302
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650303
71650304
71650304
Measuring Force Testing Device for
Micrometers
Measuring Force Testing
device for micrometers
Ref.No. 22188010
Capacity 5-10 N
For anvil Ø of up to 8 mm
Length 22 mm,
Also suitable for larger
measuring ranges by
using extensions
Weight 50 g
-
Accessories
(optional extras):
Ref.No. 71900014
-
Extensions
Length 25 mm, weight 20 g
Ref.No. 22188011
Ref.No. 22188012
Ref.No. 22188013
-
Inspection Gauges,
Fixed Gauges,
Extension
Ref. No. 22188010
5
5
Inspection Gauges,
Fixed Gauges,
Gauge Blocks - Sets
DIN EN ISO 3650 (replaces DIN 861)
Special alloyed, hardened
and aged steel
Expansion coefficient
4.6x10(-6)K(-1)
Superfinished measuring
surfaces
Cross sections:
Below 0.5 mm: 20 x 9 mm
0.5-10 mm: 30 x 9 mm
Above 10 mm: 35 x 9 mm
-
Delivery
In wooden case
-
Accessories
(optional extras):
-
Gauge block holder
for control of micrometers
Ref.No. 25135010
Gauge block maintenance kit
Ref.No. 25140001
The measuring surfaces of the
gauge blocks must be degreased
before use, wringing or slipping-on
and after use must be careful
cleaned with special grease.
Contents:
1 Line cloth for degreasing
1 Hair pencil
1 Whetstone for smoothing
of scratched gauge blocks
1 Can with special grease
1 Suede cloth
1 Pencil for grease
Delivery in wooden case
-
Additional gauge block sets
and other set combinations
on request
Single gauge blocks
on request
Ref. No. 25105034
Inspection Gauges,
Fixed Gauges,
Gauge Blocks - Sets
Accuracy 0
Ref.No.
25105033
25105043
25105053
25105073
25105093
Size of set
Piece
111
103
87
47
32
Nominal sizes
mm
1,001-100
1,005-100
1,001-100
1,005-100
1,005-50
Weight
kg
4,6
4,6
3,8
3,3
1,5
Calibration certif.
Ref.No.
71631215
71631214
71631213
71631212
71631211
Weight
kg
4,6
4,6
3,6
3,2
1,5
Calibration certif.
Ref.No.
71631215
71631214
71631213
71631212
71631211
Weight
kg
4,6
4,6
3,8
3,3
1,5
Calibration certif.
Ref.No.
71631215
71631214
71631213
71631212
71631211
Accuracy 1
Ref.No.
25105034
25105044
25304002
25305002
25105094
Size of set
Piece
111
103
87
47
32
Nominal sizes
mm
1,001-100
1,005-100
1,001-100
1,001-100
1,005-50
Accuracy 2
Ref.No.
25105035
25105045
25105055
25105075
25105095
Size of set
Piece
111
103
87
47
32
Nominal sizes
mm
1,001-100
1,005-100
1,001-100
1,005-100
1,005-50
5
5
Inspection Gauges,
Fixed Gauges,
Cylindrical Measuring Pins DIN 2269
For various testing tasks
Made of high-quality
non-twisting and wear
resistant gauge steel
Hardened, ground and lapped,
hardness 63 HRC
Each measuring pin will
be checked and signed at
a reference temperature
of 20oC
Degree of accuracy 1: +/-1 lm
Degree of accuracy 2: +/-2 lm
Facet grinding on one side for
facilitating work and protection
against damages
-
Delivery
In plastic case
-
Accessories
(optional extras):
Measuring pin holder
-
Accuracy 1
Ref.No.
25145101
25145102
25145103
25145104
25145105
25145106
25145107
25145108
25145109
25145110
25145111
25145112
25145113
25145114
25145115
25145116
25145117
25145118
25145119
25145120
25145121
25145122
Range
mm
1,00-20,00
0,50-20,00
1,00-5,00
1,00-10,00
10,10-20,00
0,50-5,00
5,05-10,00
0,50-2,00
2,02-4,00
4,02-6,00
6,02-8,00
8,02-10,00
0,50-1,00
1,00-2,00
2,01-3,00
3,01-4,00
4,01-5,00
5,01-6,00
6,01-7,00
7,01-8,00
8,01-9,00
9,01-10,00
Increments - Ø
mm
1
0,5
0,1
0,1
0,1
0,05
0,05
0,02
0,02
0,02
0,02
0,02
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
Number of pins
Piece
20
40
41
91
100
91
100
76
100
100
100
100
51
101
100
100
100
100
100
100
100
100
Weight
kg
2,5
4,0
0,9
2,8
12,0
1,8
5,9
1,3
1,9
2,2
3,2
4,6
1,0
1,2
1,6
1,3
1,6
2,0
2,9
3,4
4,0
4,9
Calibration certif.
Ref.No.
71630405
71630406
71630407
71630410
71630411
71630410
71630411
71630409
71630411
71630411
71630411
71630411
71630408
71630411
71630411
71630411
71630411
71630411
71630411
71630411
71630411
71630411
Inspection Gauges,
Fixed Gauges,
Accuracy 2
Ref.No.
Range
mm
1,00-20,00
0,50-20,00
1,00-5,00
1,00-10,00
10,10-20,00
0,50-5,00
5,05-10,00
0,50-2,00
2,02-4,00
4,02-6,00
6,02-8,00
8,02-10,00
0,50-1,00
1,00-2,00
2,01-3,00
3,01-4,00
4,01-5,00
5,01-6,00
6,01-7,00
7,01-8,00
8,01-9,00
9,01-10,00
25145201
25145202
25145203
25145204
25145205
25145206
25145207
25145208
25145209
25145210
25145211
25145212
25145213
25145214
25145215
25145216
25145217
25145218
25145219
25145220
25145221
25145222
Increments - Ø
mm
1
0,5
0,1
0,1
0,1
0,05
0,05
0,02
0,02
0,02
0,02
0,02
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
0,01
Number of pins
Piece
20
40
41
91
100
91
100
76
100
100
100
100
51
101
100
100
100
100
100
100
100
100
Weight
kg
2,5
4,0
0,9
2,8
12,0
1,8
5,9
1,3
1,9
2,2
3,2
4,6
1,0
1,2
1,6
1,3
1,6
2,0
2,9
3,4
4,0
4,9
Calibration certif.
Ref.No.
71630405
71630406
71630407
71630410
71630411
71630410
71630411
71630409
71630411
71630411
71630411
71630411
71630408
71630411
71630411
71630411
71630411
71630411
71630411
71630411
71630411
71630411
Measuring pin holder
Ref.No.
25180001
25180002
Range
mm
1-2
2-4
Weight
g
20
30
Ref.No.
25180003
25180004
Range
mm
4-6
6-8
Weight
g
35
45
Ref.No.
25180005
25137001
Range
mm
8-10
Weight
g
80
5
5
Inspection Gauges,
Fixed Gauges,
Inspection Gauges,
Fixed Gauges,
5
5
Inspection Gauges,
Fixed Gauges,
E
126
B
Bevel Edge Squares DIN 875
146
Bore gauges
127-128, 130-131
Bore Gauges - Accessories
132
Bore Gauges - Adjustment / Application
129
Pistol Grip Holder
94
Pistol Grip Holder - Accessories
95
Bore Micrometers Digital
92
Bore Micrometers Digital - Sets and
Displays
93
C
Caliper Gauges Digital/Analog for
Internal and External Measurements
Caliper Gauges for External
Measurements
Caliper Gauges for Internal
Measurements
Comparative Gauge - Uhrtast Accessories and Examples for Application
Comparator Gauges
Crankshaft Tester with Dial Indicator
123
Gauge Blocks - Sets
Gauge Stands
125
I
49-52
43
44-45
47-48
133
134
136
135
19-20
104-105
106-107
108-111
113-116
117-118
103
79
82
78
76
75
83
160-161
138-139
152-153
H
124
97-99
119
137
162-163
77
69-74
67-68
G
Instruments
D
Depth Caliper for One-Hand-Operation
Protection IP 65
Depth Gauge Digital
Depth Gauge Digital - Accessories
Depth Gauges with Dial Indicator
Depth Micrometers
Dial Gauges Digital
Dial Gauges DIN 878
Dial Test Indicator
Display Unit for Precision Gauge Heads
External Micrometer Digital
External Micrometers for External
Threads
External Micrometers for Pipe Wall
Thicknesses
External Micrometers for Tooth Pitches
External Micrometers with Counter
External Micrometers with Indicator
External Micrometers with Scale Disc
Internal and External Caliper in
Lightweight Design
Internal Micrometers Analog
Internal Micrometers Analog - Sets
59-61
53
90
91
80-81
87-89
K
Knife-Edge Straightedges DIN 874
147
L
Limit Plug Gauges
Linear Measuring Instrument Digital
Long Range Gauge Head Digital
Long Range Gauge Head Digital Examples for Applications / Accessories
154
66
62-63
100
101
M
Magnetic Holders for Dial Gauges
Marking Caliper
Measuring Force Testing Device for
140
58
Alles
auf einen Blick
Alphabetisches Inhaltsverzeichnis
Micrometers
Measuring Tool Set
Micrometer Heads
Micrometer Heads Digital
Micrometer Holders
Mini Depth Caliper
159
148
86
85
84
46
37-42
P
Plain Ring Gauges / Setting Gauges
Pocket Caliper, Digital, DIN 862 , System
of Protection IP 65
Lightweight Design
Precision Dial Gauges
Precision Gauge Head Electronic
Precision Levels
Protractors
155
21-23
13-16
12
10-11
112
102
149
143
R
Radio Data Transfer - Set
17
S
Saw Tooth Setting Gauge
Software OptoFace
Workshop Use
122
18
6-9
54-57
144-145
T
Thread Plug Gauges
Thread Ring Gauges
Tool Presetter
Tool Presetter - Accessories
120-121
156
157-158
64
65
U
Universal Comparative Gauge Uhrtast
96
141-142
V
150-151
W
Workshop
Workshop
Workshop
Workshop
Workshop
Design
Workshop
Caliper DIN 862
Caliper in Lightweight Design
Caliper Lightweight Design
Caliper, Digital, DIN 862
Caliper, Digital, in Lightweight
34-36
33
32
26-30
24-25
31

Helios - Full Line Catalog

Transcription

Similar documents

PROMOTIOn PRICE! - Utensileria Lughese

HIAB ACCESSORIES

Metrology

QUALITY TOOLS

Shrink Fit Holders - Lyndex

Market structure, scale economies, and industry