dynamic nt slide system

Transcription

DYNAMIC NT SLIDE SYSTEM
Concealed roller bearing slides for
superior wooden drawer boxes.
2
Organizing systems
Drawer slides
System Information
Dynamic NT
Concealed roller bearing slides for 3 and 4 sided
wooden drawer boxes.
Dynamic NT means innovation in drawer slide
technology.
New features of the Dynamic principle guarantee excellent running conditions and side stability.
Dynamic NT full extension slides with 40 kg load capacity cover all requirements that are needed when using
an undermount slide on a wooden drawer box.
Mounting Aids
Dynamic NT undermount slides, precise and
dependable.
• Soft and controlled closing of the drawer through
Soft-close technology
• 40 kg load capacity with all Dynamic NT
full extension slides
• Height adjustment within the front bracket
• The integrated tolerance compensation compensates
side tolerance of the cabinet with ease
• System compatibility,single and full extension are
completely interchangeable.
• Efficient installation with slide-on mounting
Technical
Information
Single and full extension slides with integrated
Soft-close soft closing system.
Dynamic NT roller bearing slides convince through
superior running conditions:
With ease you can extend the drawer, and with a gentle
push the slides glide back into the closed position.
Soft-close slows your drawer softly down and closes it
quietly until it stops.
The Dynamic NT is a unique element in your cabinet
that your customer will appreciate.
3
Concealed full extension slide, 40 kg
Slide-on mounting with integrated
Soft-close or Self-close.
•
Full extension , 40 kg load capacity (based on 500 mm slide)
•
Soft-close soft closing system
Self-close, alternative
Self adjusting of drawer when sliding on slide
Integrated height adjustment, tool-less +2.5 mm
•
•
•
Dynamic NT Full extension, 40 kg
Nominal length
Ref. No. Soft-close
Ref. No. Self-close
250
7012.250
270
7002.270
300
7002.300
7012.300
350
7002.350
7012.350
400
7002.400
7012.400
450
7002.450
7012.450
500
7002.500
7012.500
550
7002.550
7012.550
600
7002.600
650
7002.650
PU/Packing Unit
PU 5
PU 5
Carrying capacity for excessive lengths 30 kg dyn.
VPE 5 = 5 pairs per box
Front fixing bracket with integrated height adjustment
(Please order separately)
PU/Packing Unit
Ref. No.
Ref. No.
7900.VE1AA
7900.VE10AA
PU 1
PU 10
PU 1 = 1 set, l/r
PU 10 = 10 set
4 sided drawer
3 sided drawer
Inset drawer
Accessories and Mounting Aids
Dynamic NT Single extension
Page 6
Mini Sidewing
Page 10
Mounting Aids
Page 14
Dynamic NT Tipmatic Plus
Page 8 - 9
Magic Sorto
Page 12
Technical Information
Page 16
4
Min. installation depth
250
240
250
270
260
270
300
290
300
350
340
350
400
390
400
450
440
450
500
490
500
550
540
550
600
590
600
650
640
650
Drawer
Inset drawer
System Information
Drawer length
SK = Drawer length
NL = Nominal length of slide
Drawer cut-outs and borings
Drawer slides
NL
Cabinet fixing positions
Front edge of cabinet
160
96
Back
Organizing systems
250
Back
270
Drawer installation measurements
224
300
128
350
Zuschnittmaße Blendenprofil und Reling
Mounting Aids
192
400
288
450
Technical
Information
500
550
LSB = Inside drawer width
LW = Inside cabinet width
Identical mounting positions for single and full extension slides.
600
650
14
28
32
Single extension
on page 6
Full extension
352
37
All measurements in millimeter.
5
Concealed single extension slide, 30 kg
Slide-on mounting with integrated
Soft-close or Self-close.
•
Single extension , 30 kg load capacity (based on 500 mm slide)
•
Soft-close soft closing system
Self-close, alternative
Self adjusting of drawer when sliding on slide
Integrated height adjustment, tool-less +2.5 mm
•
•
•
Dynamic NT Single extension, 30 kg
Nominal length
Ref. No. Soft-close
Ref. No. Self-close
250
7512.250
300
7502.300
7512.300
350
7502.350
7512.350
400
7502.400
7512.400
450
7502.450
7512.450
500
7502.500
7512.500
550
7502.550
7512.550
PU 10
PU 10
PU/Packing Unit
VPE 10 = 10 pairs per box
Front fixing bracket with integrated height adjustment
(Please order separately)
PU/Packing Unit
Ref. No.
Ref. No.
7900.VE1AA
7900.VE10AA
PU 1
PU 10
PU 1 = 1 set, l/r
PU 10 = 10 set
4 sided drawer
3 sided drawer
Inset drawer
Dynamic NT Full extension
Page 4
Mini Sidewing
Page 10
Mounting Aids
Page 14
Page 8 - 9
Magic Sorto
Page 12
Page 16
6
Min. installation depth
Extension loss Drawer
250
240
250
52
300
290
300
52
350
340
350
63
400
390
400
63
450
440
450
74
500
490
500
96
550
540
550
107
Inset drawer
System Information
Drawer length
NL
Drawer cut-outs and borings
Drawer slides
SK = Drawer length
NL = Nominal length of slide
Cabinet fixing positions
Front edge of cabinet
160
96
Back
Organizing systems
250
224
Back
300
Drawer installation measurements
128
350
192
Mounting Aids
400
450
500
9
550
14
Technical
Information
28
18
LSB = Inside drawer width
LW = Inside cabinet width
288
37
Identical mounting positions for single and full extension slides.
Single
extension
Full extension
on page 4
7
The full extension for handle-free furniture design.
•
Top Grass running performance
Load capacity up to 40 kg
Tool-free height adjustment
Simple drawer insertion and removal
Convenient opening and closing of the drawer or pull-out by gently tapping at any point over
the entire width of the front.
The unique and synchronised locking mechanism makes closing thdrawer a delightful
and satisfying experience for the user.
Comfortable access to drawer contents thanks to the large opening distance.
•
Convenient front gap adjustment by means of eccentric element: ±1.5 mm
•
•
•
•
•
•
Dynamic NT Tipmatic Plus full extension
Ordering information
1
For a pair, you will need to order one
Lengths
Grass Dynamic NT Tipmatic® Plus full
270
71090-03
extension as well as Grass snap-in
300
71091-03
devices, locking units and synchroni-
350
71092-03
sation bars. One packing unit of full
400
71093-03
extensions consists of 5 pairs. One
450
71094-03
4
set of snap-in devices consists of 5
500
71095-03
Set of 5 snap-in devices
550
71096-03
Set: 5 left and 5 right
left-hand and 5 right-hand devices.
One set of locking units consists of
2
Drawer drill jig
68257-04
3
Locking units
71115-03
66836-00
Cabinet member drill jig
95253
Pilot drill
35692
Drill bit with stop ring
92594
Drilling jig for the
back panel adapter
67897-03
71098-01
Drilling jig for
the locking unit
200 snap-in devices
Packing unit 5 pairs
Assembly aids
Synchronisation unit
full extension
71097-01
67897-12
Box of 200 snap-in devices containing
5 pairs of locking units and 5 pairs
packs of 5 pairs each
of back panel adapters. One set of
synchronisation units consists of 10
synchronisation bars, length 1079
2
mm, and 20 synchronisation levers.
3
1
4
Page 4
Mini Sidewing
Page 10
8
Magic Sorto
Page 12
Mounting Aids
Page 14
Page 16
Drill hole pattern (detail)
Drawer lenght = Nominal length -10 mm
9 99
System Information
Assembly of the snap-in device
min 5
Dimension diagram of the drawer
9
12
7,3
Height adjustment
+2,5 mm
max. 16
27
32
27
22
Cabinet member fastening
Euro screw:
38
10-13
28.5
9.5
60
7.5
12
11.5
5
37
dia 6/11 deep
dia. 6 x at least 13 mm
±1.5mm
(21)
Drawer slides
with dia. 7 mm countersunk head
Inside drawer width = ICW-42
Installation depth = Nominal length + 26
Inside cabinet width (ICW)
Drawer
Drill hole pattern – cabinet members
4,5 ±1,5
SK = NL - 10
160
96
32
35,3 ±0,3
35,5
Nominal
length
270
NL - 20
Minimum installation depth = NL + 26
300
35,3 ±0,3
330 ±0,3
128
Adapter drill holes
21
350
380 ±0,3
35,3
192
±0,3
37
280 ±0,3
35,3 ±0,3
224
21
Organizing systems
250 ±0,3
min. 12
400
Mounting Aids
10
35,3 ±0,3
430 ±0,3
288
24,5
480 ±0,3
35,3 ±0,3
450
530 ±0,3
35,3
12
±0,3
500
550
17
28
32
14
37
Minimum installation depth = NL + 26
Technical
Information
Front gap adjustment
4,5 (±1,5)
Cutting the
synchronisation
2
bar to size
+
ICW - 97
–
9
Magic Mini Sidewing
Organizing system for tall wooden drawers.
•
Optimum space organisation for tall drawers
•
Tool-less mounting
•
Adjustable elements for individual arrangement
possibilities
Easy to cut to size Aluminium Dividing Rails
•
Magic Mini Sidewing
Ref. No. alu-grey
12650
PU/Packing Unit
PU 4
PU 4 = 4 pcs.
Magic Classic Dividing Set
Cabinet width in mm
Ref. No. alu-metallic
600
12700.495.17
1200
12700.1095.17
PU/Packing Unit
PU 1/25
PU 1/25 = 1 set per bag / 25 sets per box
Magic Dividing Set
Magic Dividing Set
600 mm
1200 mm
1 set for 600 cabinet width consists of:
2 Length Rails 462 mm
2 Divider Rails 495 mm
4 Fixing parts
1 set for 1200 cabinet width consists of:
3 Length Rails 462 mm
2 Divider Rails 1095 mm
6 Fixing parts
Page 4
Page 6
10
Page 8 - 9
Page 16
System Information
Mounting measurements Magic Mini Side Wing
40
12
38
32
Drawer slides
120
32
Magic Classic Dividing Set
Organizing systems
X
Y
Length Rail
Divider Rail
Y = Drawer interior length -14 mm
X = Drawer interior width -41 mm
Technical
Information
Mounting Aids
cut to size
Drawer interior width
X
Y
Drawer interior length
11
Magic Sorto
Organizing system for wooden drawers.
•
•
•
•
Modular-based expandable system
Individual components, dishwasher resistant
Safe for foods, hygienically approved
Trays made of stainless steel, Divider supports
alu-metallic, plastic components alu-grey
Magic Sorto Set
Ref. No. alu-metallic
1
Magic Sorto set NL 550 B3
12039.550.17
2
Magic Sorto set NL 550 B4
12049.550.17
PU/Packing Unit
PU 1
PU 1 = 1 set
Sorto trays: stainless steel, plastic parts light-grey
Divider Support: alu-metallic, plastic parts light-grey
1 Magic Sorto Set NL 550 B3
2 Magic Sorto Set NL 550 B4
NL 550 and cabinet widths
from 450 mm or more.
NL 550 and cabinet widths
from 600 mm or more.
Consisting of:
Consisting of:
3 Sorto trays 270 x 90 mm
1 Divider Support
1 Divider Support
Page 4
Page 6
12
Page 8 - 9
Page 16
A
362
Installation measurements for wide cabinets 500 and 550 mm depth
System Information
Installation measurements for wide cabinets 400 and 450 mm depth
D
D
362
DIL
DIL
65.5
65.5
DIL -363 mm
DIL -454 mm
Installation measurements for small cabinets 400 und 450 mm depth
Installation measurements for small cabinets 500 and 550 mm depth
271
271
Drawer slides
DIL = Drawer
Interior Length
181
Organizing systems
181
Divider Support cut to size
Sorto trays 180, 270 mm
B
C
Spring Loaded
Divider Support
Mounting Aids
End Cap
90.5
181
65
271.5
Technical
Information
DIL -87 mm
Cut to size
Legend
A
Measure drawer interior length (DIL). Remove spring loaded end caps to aluminum.
B
Cut aluminum bar (length = DIL -87 mm).
C
Attach spring loaded end caps to aluminum profile.
D
Cut wooden spacer.
13
Mounting Aids
for Dynamic NT.
7990 Boring jig for rear hook and front fixing bracket borings
For rear hook and front fixing
bracket borings
Ref. No.
7990
PU 1
PU/Packing Unit 1 = 1 pc.
Ø 2,5 mm
Ø 2,5 mm
Ø 6 mm
Page 4
Page 6
14
Page 8 - 9
Page 16
Drill bit for boring jig
7990
Ref. No.
7992
PU 1
PU/Packing Unit 1 = 1 set
1 set consisting of:
1 Shaft, 3 Drilling bit 2,5 mm, 1 Allen key
System Information
Drill bit
Length
Ø 7.1
Ref. No. / Ø 6,3 x 10,5 mm
Ref. No. / Ø 6,3 x 14 mm
191
192
PU 1000
PU 1000
Drawer slides
Ø 6.3
191 / 192 Euro screw, nickel plated
PU/Packing Unit 1000 = 1000 pcs.
198 Wood screw, nickel plated
Organizing systems
Ø 3.5
Ref. No. / Ø 3,5 x 15 mm
198
PU 1000
PU/Packing Unit 1000 = 1000 pcs.
Mounting Aids
Ø7
Technical
Information
15
15
for Dynamic NT.
Drawer insertion
Place onto extended Dynamic NT
drawer slides and close.
Height adjustment
Integrated tool-less height adjustment up to 2.5 mm.
Drawer removal
Extend drawer, press the lever
of the front fixing bracket and
remove the drawer from the
Dynamic NT slides.
Side tolerance
Side tolerance ±1,5 mm.
Information
Fixing of cabinet members:
The specified data is based on reference particle board according to DIN 68858, MDF and hardwood.
If other types of woods and qualities are used, please consider the proper screw type as well as numbers of screws used.
16
Technical
Information
Mounting Aids
Organizing systems
Drawer slides
System Information
Notes
17
Notes
18
Notes
19
71172-00 – 05|2009 – 5.000 (ENG) – GRASS Advertising All errors and omissions excepted
Grass GmbH
Movement Systems
Grass Platz 1
A 6973 Höchst, Österreich
Telefon +43 (0) 5578 701-0
Telefax +43 (0) 5578 701-59
E-Mail [email protected]

dynamic nt slide system

Transcription

Similar documents

Parallelschnitte ganz einfach

Description of exhibits

Description of exhibits