Print Quality PDF

ELITE PLUS
ELITE PLUS SLIDE SYSTEM
Undermount drawer technology with a precision roller
carriage and smooth closing action
Bringing together the advances of undermount technology
with a precision roller carriage.
With an even better Soft-close action
Elite Plus pulls open easily and the unique closing
action with the Airmatic is smooth and silent.
2
The innovative Elite Plus drawer slide draws
attention to the beauty of your cabinetry and
leaves the mounted hardware completely
out of sight.
The Elite Plus brings together the advances of
undermount technology with a precision roller
carriage and features the Airmatic closing device.
The Aimatic uses natural, clean air to deliver a
soft, quiet closing action every time.
Offered in a full range of lengths for frameless and
face frame construction, the Elite Plus features a
full drawer extension for maximum use of interior
space. It is a proven undermount slide with an
ample load capacity of 75 lbs. that meets and
exceeds ANSI/BHMA Grade 1 testing standards.
Year after year, Elite Plus enables drawers to
function quietly and flawlessly with the quality
construction and Grass standard of excellence you
have come to expect.
Grass Elite Plus
Table of Content
Description
Adjustment
4-5
Features and Benefits
adjustment (2.5 mm)
tolerance, left side (max. ± 1.5 mm)
6
adjustment (2.5 mm)
tolerance, left side (max. ± 1.5 mm)
8
Elite Plus 16
Airmatic Soft-close
• Full extension
• For 5/8” (16mm) material
• Height
• Integrated
• Side
Elite Plus 19
Airmatic Soft-close
• Full extension
• For 3/4” (19mm) material
• Height
• Integrated
Page
• Side
V-notch Brackets
Brackets, 19mm
10
• V-notch
Accessories
Template
• Screws
11
• Drilling
Weight Capacities per pair of slides
Elite Plus: 75 lbs dynamic load raiting; 100 lbs static load rating
Elite Plus meets and exceeds the minimum requirements of ANSI/BHMA 156.1 standard, Grade 1.
lbs.
3
Elite Plus
Features and Benefits
Features
•
•
•
•
•
Standard locking device
Flange mount locking device
with height adjustment
with height adjustment
Self-aligning rear mount brackets
The standard front locking device
This special front locking device features
Brackets self-align the drawer when
allows aligning the height of the
a flange for easy mounting to the bottom
cabinets are out of square, ± 2mm
drawer. A 2.5mm [3/32”] upwards
of the drawer. The height of the drawer
[3/32”] adjustment range.
adjustment is achieved via the green
can be adjusted by 2.5mm [3/32”] via the
adjustment plate by moving it forward
green adjustment plate.
and back.
• Frame stop tab
Quickly locates the slide on the face
frame at the correct setback.
• Multiple cleats
For secure front locking.
• Minimal opening force
Superb soft-closing action.
4
Slides mount underneath to give full view of finely crafted drawers
Airmatic shock absorber softly glides drawers to a stop
Weight capacity: 75 lbs dynamic, 100 lbs static.
Available for 5/8” and 3/4” drawer side thickness
For frameless and face frame construction
Features
•
The repositioned Airmatic damper provides:
- Narrower drawer widths (9” inside width)
- Easier insertion and removal of drawer
- More compact and appealing design
- No protruding parts inside cabinet
- Basic proven slide concept has not changed
• Unique and integrated oil-free damper
• Wide drawer member
Utilizes a cushion of air for safe and
Provides superior stability.
hygenic use.
• Repositioned Airmatic damper
Gives the Elite Plus an improved
closing action.
• Depth adjustment
• Tilt adjustment
4mm (5/32”) allows perfect alignment for
4mm (5/32”) allows tilting the drawer for
the drawer front.
perfect front alignment.
5
Elite Plus 16
Full Extension Slide for 16mm (5⁄8”) maximum drawer thickness
•
•
•
•
•
•
Slides mount underneath to give a full view of finely crafted drawers
Zinc plated, roll formed steel components
Precision, smooth-running synthetic roller carriages
Airmatic damper softly glides drawers to a stop
Self-latching front locking devices have comfortable release
levers for drawer removal
Front locking device height adjustable 2.5mm [3⁄32”]
•
Positive tracked right side, ± 1.5mm [1⁄16”] side tolerance on left side
•
Self-closing springs engage 30mm [1 1⁄4”] before closed position
Weight capacity: 75 lbs. dynamic, 100 lbs. static
Exceeds ANSI/BHMA 156.9, Grade 1, Type B05011 drawer slide, test standards
•
•
Elite Plus 16
Drawer length
Nominal length
Min Installation Depth
Max Installation Depth
Item No.
PU
240 (9 7⁄16")
250 (9 27⁄32”)
259 (10 3⁄16")
296 (11 5⁄8")
13031-03
5
305 (12”)
317 (12 15⁄32”)
329 (12 15⁄16")
363 (14 5⁄16")
13033-03
5
381 (15”)
394 (15 1⁄2”)
407 (16")
440 (17 5⁄16")
13035-03
5
457 (18”)
470 (18 1⁄2”)
479 (18 7⁄8”)
516 (20 5⁄16”)
13039-03
5
533 (21”)
550 (21 21⁄32”)
562 (22 1⁄8”)
596 (23 7⁄16”)
13043-03
5
1
5
381 (15”)
394 (15 ⁄2”)
407 (16")
440 (17 ⁄16”)
13035-12
200
457 (18”)
470 (18 1⁄2”)
479 (18 7⁄8”)
516 (20 5⁄16”)
13039-12
200
533 (21”)
550 (21 21⁄32”)
562 (22 1⁄8”)
596 (23 7⁄16”)
13043-12
200
*For frameless applications, deduct 1.5mm [1/16”] for minimum installation depth.
Locking devices and Rear mount bracket
1a
Description
Item No.
PU
(Please order separately)
1a 7523 Front locking device kit*
02614-12
200
Locking device Left
02615-12
200
Locking device Right
02616-12
200
02613-03
5
1b 7523 Front locking device kit* with flange
1b
Locking device Left with flange
02611-12
200
Locking device Right with flange
02612-12
200
2 7523 Universal rear mount bracket**
7523 Universal rear mount bracket**
7950.VE20
20
7950.VE300
300
*Kit: Left/ Right locking device, (4) #6 x 1/2” flat head phillips screws, **Plug-in brackets available on page 12.
2
2
2
1
a, b
1
6
www.grassusa.com
U.S. Patent # 6,932,200
a, b
PU = Packaging Unit
Dimensions in millimeters, fractional inch equivalents as noted.
Drawer installation dimensions
Max. drawer side
Elite 16 = 16 [5/8"]
Interior cabinet width (ICW)
Rear Bracket Position
21
[13/16"]
11
[7/16"]
13 [1/2"]
Recess
36.5
[1 7/16"]
25.5
[1"]
Drawer Measurements
Drawer
Front
Ø6 x 10
[1/4" x 3/8"]
hole in back of drawer
for catch hook
14 [9/16"]
Bottom clearance
9
[11/32"]
Frame
rail
Drawer
Back
4th Side
9
13 mm (1/2")
"
Rear notch
7
[9/32"]
21
35
[1 3/8"]
For face frame applications
only. Use minimum of 3
screws per bracket, #6 x
1/2” truss head screws.
16
[5/8"]
Opening height
- 20 [13/16"]
= Max. drawer height
7/ L
16 e
" ng
- th
12 o
" f
- D
15 ra
" w
- er
18
"
-
6 [1/4"]
Min. top
clearance
32
[1 1/4"]
Interior drawer width formula
Elite 16 = ICW - 42 [1 5/8"]
Elite 19 . . . ICW - [1-15/16"]
6"]
17.5
[11/16"]
Frame stile
Elite 16 = 21 [13/16"]
#7 wood screw
location at face frame
Euro screw Ø5 x 13mm or #7 x 5/8” flat
head wood screw location on
panel cabinets
Hole-ø 6mm (1/4”)
10mm (3/8”) deep
Min. 35 mm
(1 3/8")
11 mm (7/16”)
7 mm
Frameless cabinet member boring specifications
Face Frame cabinet member boring specifications
517 [20 3/8"]
Cabinet depth
421 [16 9/16"]
250/240*
293 [11 9/16"]
Setback
4 [5/32"]
229 [9"]
96
64
64
305 [12"]
Interior depth
325 [12 13/16"]
37 32
(9/32”)
32
96
317/305*
96
250/240*
394/381*
Setback
4 [5/32"]
317/305*
470/457*
64
394/381*
381 [15"]
457 [18"]
533 [21"]
610 [24"]
550/533*
54
10
[3/8"]
470/457*
54
9
9
550/533*
19
192
96
96
78
54
Slotted hole locations for inset applications
*Cabinet member length / Drawer length (mm)
All dimensions in millimeters.
Subject to technical modifications without notice.
7
Elite Plus 19
Full Extension Slide for 19mm (3⁄4”) maximum drawer thickness
•
•
•
•
•
•
Slides mount underneath to give a full view of finely crafted drawers
Zinc plated, roll formed steel components
Precision, smooth-running synthetic roller carriages
Airmatic damper softly glides drawers to a stop
Self-latching front locking devices have comfortable release
levers for drawer removal
Front locking device height adjustable 2.5mm [3⁄32”]
•
Positive tracked right side, ± 1.5mm [1⁄16”] side tolerance on left side
•
Self-closing springs engage 30mm [1 1⁄4”] before closed position
Weight capacity: 75 lbs. dynamic, 100 lbs. static
Exceeds ANSI/BHMA 156.9, Grade 1, Type B05011 drawer slide, test standards
•
•
Elite Plus 19
Drawer length
Nominal length
Min Installation Depth
Max Installation Depth
Item No.
PU
240 (9 7⁄16")
250 (9 27⁄32”)
259 (10 3⁄16")
296 (11 5⁄8")
13032-03
5
305 (12”)
317 (12 15⁄32”)
329 (12 15⁄16")
363 (14 5⁄16")
13034-03
5
381 (15”)
394 (15 1⁄2”)
407 (16")
440 (17 5⁄16")
13037-03
5
457 (18”)
470 (18 1⁄2”)
479 (18 7⁄8”)
516 (20 5⁄16”)
13041-03
5
533 (21”)
550 (21 21⁄32”)
562 (22 1⁄8”)
596 (23 7⁄16”)
13046-03
5
1
7
5
457 (18”)
470 (18 ⁄2”)
479 (18 ⁄8”)
516 (20 ⁄16”)
13041-12
200
533 (21”)
550 (21 21⁄32”)
562 (22 1⁄8”)
596 (23 7⁄16”)
13046-12
200
*For frameless applications, deduct 1.5mm [1/16”] for minimum installation depth.
Locking devices and Rear mounting bracket
1a
Description
Item No.
PU
(Please order separately)
1a 7523 Front locking device kit*
02614-12
200
Locking device Left
02615-12
200
Locking device Right
02616-12
200
02613-03
5
1b 7523 Front locking device kit* with flange
1b
Locking device Left with flange
02611-12
200
Locking device Right with flange
02612-12
200
2 7523 Universal rear mount bracket**
7523 Universal rear mount bracket**
7950.VE20
20
7950.VE300
300
*Kit: Left/ Right locking device, (4) #6 x 1/2” flat head phillips screws, **Plug-in brackets available on page 12.
2
2
2
1
a, b
1
8
www.grassusa.com
U.S. Patent # 6,932,200
a, b
PU = Packaging Unit
Dimensions in millimeters, fractional inch equivalents as noted.
Drawer installation dimensions
Max. drawer side
Elite 19 = 19 [3/4"]
Interior cabinet width (ICW)
Rear Bracket Position
21
[13/16"]
11
[7/16"]
13 [1/2"]
Recess
36.5
[1 7/16"]
25.5
[1"]
Drawer Measurements
Drawer
Front
Ø6 x 10
[1/4" x 3/8"]
hole in back of drawer
for catch hook
14 [9/16"]
Bottom clearance
Drawer
Back
4th Side
9
13 mm (1/2")
"
Rear notch
9
[11/32"]
Frame
rail
21
35
[1 3/8"]
For face frame applications
only. Use minimum of 3
screws per bracket, #6 x
1/2” truss head screws.
7
[9/32"]
16
[5/8"]
Opening height
- 20 [13/16"]
= Max. drawer height
7/ L
16 e
" ng
- th
12 o
" f
- D
15 ra
" w
- er
18
"
-
6 [1/4"]
Min. top
clearance
32
[1 1/4"]
Interior drawer width formula
Elite 19 = ICW - 49 [1 15/16"]
Elite 19 . . . ICW - [1-15/16"]
6"]
17.5
[11/16"]
Frame stile
Elite 19 = 24.5 [15/16"]
#7 wood screw
location at face frame
Euro screw Ø5 x 13mm or #7 x 5/8” flat
head wood screw location on
panel cabinets
Hole-ø 6mm (1/4”)
10mm (3/8”) deep
Min. 35 mm
(1 3/8")
11 mm (7/16”)
7 mm
Frameless cabinet member boring specifications
Face Frame cabinet member boring specifications
517 [20 3/8"]
Cabinet depth
421 [16 9/16"]
250/240*
293 [11 9/16"]
Setback
4 [5/32"]
229 [9"]
96
64
64
305 [12"]
Interior depth
325 [12 13/16"]
37 32
(9/32”)
32
96
317/305*
96
250/240*
394/381*
Setback
4 [5/32"]
317/305*
470/457*
64
394/381*
381 [15"]
457 [18"]
533 [21"]
610 [24"]
550/533*
54
10
[3/8"]
470/457*
54
9
9
550/533*
19
192
96
96
78
54
Slotted hole locations for inset applications
*Cabinet member length / Drawer length (mm)
All dimensions in millimeters.
Subject to technical modifications without notice.
9
Elite Plus
Accessories and assembly aides
V-notch rear mounting brackets, 19mm
3
[1/8"]
Ø10
No socket
PU
02212-12
200
V-notch, metal, no socket, right
02213-12
200
V-notch, metal, with socket, left
02216-12
200
V-notch, metal, with socket, right
02217-12
200
19mm rear mounting brackets
Side-to-side adjustment ± 6mm [1⁄4”]
Frame
rail
Frame stile
32
[1 1/4"]
•
Item No.
V-notch, metal, no socket, left
With socket
3
[1/8"]
•
Description
Drilling Template
•
•
Use to precisely bore holes in the drawer back
Use with a standard 1/4” drill bit and stop collar
Left side drilling
Right side drilling
Description
Item No.
PU
Elite Plus drilling template
02511-01
1
Wood screw, nickel plated
(Phillips)
Item No.
PU
Flathead
Ø 6 x 5/8”
81001-43
500
Flathead
Ø 6 x 3/4”
81003-43
500
Item No.
PU
Type
Ø 3.5
Steel, nickel plated
Length
Ø7
Euro screw, nickel plated
Steel, nickel plated
Type
(Pozi)
Euro Screw
Ø6.3 x 11mm (7/16”) 499.360.61.1015
500
Euro Screw
Ø6.3 x 13mm (1/2”)
500
499.360.61.3015
PU = Packaging Unit
10
www.grassusa.com
Dimensions in millimeters, fractional inch equivalents as noted.
Notes
11
GRASS Canada Inc.
10 Newgale Gate, Unit 7
Toronto, ON M1X 1C5
Phone: 1-800-334-3512
Fax: 1-800-525-8406
Phone 1-800-461-4975
Fax
1-416-335-5907
Website: www.grassusa.com
E-mail: [email protected]
Internet: www.grasscanada.com
E-Mail: [email protected]
www.grassusa.com
Item #01744-01-EPB-5M-MAP-3/13 (OL_V2_12/15)
GRASS America Inc.
1202 NC Highway 66 South
Kernersville, NC 27284