WS Price January 2011

Transcription

WEB: http;//www.worksaver.com
•
E-Mail: [email protected]
PRICE SHEET
Effective Date: January 15, 2011
Dealer Price List – Confidential
Designed. Engineered. Remarkable Value
Prices shown are in U.S. Dollars u F. O. B. Factory
Product pictures shown are a reasonable reproduction and are not to scale.
Worksaver, Inc. reserves the right to change specifications, designs, and prices without notice.
WORKSAVER, INC. LIMITED WARRANTY
Worksaver, Inc. warrants it implements, parts and accessories to be free from defects in materials and
workmanship for a period of six (6) months from date of retail sale for non-commercial, state and
municipalities. Use ninety (90) days for commercial use from date of retail sale.
Replacement or repair parts installed in the equipment covered by this warranty are warranted for ninety
(90) days from the date of purchase of such part or to the expiration of the applicable new equipment
warranty period, whichever occurs later.
Such parts shall be provided at no cost to the user during regular working hours. Worksaver reserves the
right to inspect any equipment or parts, which are claimed to have been defective in material or
workmanship. Prior approval of warranty repairs is required.
DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES
Worksaver’s obligation under this warranty, to the extent allowed by law, is in lieu of all warranties,
implied or expressed, including implied warranties of merchantability and fitness for a particular purpose
and any liability for incidental and consequential damages with respect to the sale or use of the items
warranted. Such incidental and consequential damages shall include but not be limited to: transportation
charges other than normal freight charges; cost of installation other than cost approved by Worksaver;
duty; taxes; charges for normal service or adjustments; loss of crops or any other loss of income; rental or
substitute equipment, expenses due to loss, damage, detention or delay in the delivery of equipment or
parts resulting from acts beyond the control of Worksaver, Inc.
THIS WARRANTY SHALL NOT APPLY:
1. To vendor items which carry their own warranties, such as hydraulic motors, valves, and hydraulic
cylinders.
2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident.
3. If parts not made or supplied by Worksaver have been used in connection with the unit, if, in sole
judgment of Worksaver such use affects its performance, stability, or reliability.
4. If the unit has been altered or repaired outside of an authorized Worksaver dealership in a manner
which, in the sole judgment effects its performance, stability, or reliability.
5. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic
fluid, worn blades, or to normal deterioration of such things as belts and exterior finish, due to use or
exposure.
6. To expendable or wear items such as slide blocks, bumpers, springs, disc blades, cutting edges, digger
teeth, augers, tillage points, shanks and other items that in the company’s sole judgement is a wear
item.
NO EMPLOYEE OR REPRESENTATIVE OF WORKSAVER IS AUTHORIZED TO CHANGE THIS
WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS
MADE IN WRITING AND SIGNED BY WORKSAVER’S SERVICE MANAGER, POST OFFICE
BOX 100, LITCHFIELD, ILLINOIS 62056-0100
TABLE OF CONTENTS
ATV Attachments
Pull Type Landscape Rake & Box Scraper............................................................ 32
Pull Type Flip Over Disc ....................................................................................... 32
Pull Type Flip Over Culti-packer ........................................................................... 32
Pull Type 5-Bushel Seeder .................................................................................... 32
Pull Type Flip Over Harrow.................................................................................. 32
Mounted 1-Bushel Seeder / Spreader.................................................................... 32
Blades
Snow Blades
………………………………………16-17
3-pt Rear Tractor Blades....................................................................................... 28
Skid Shoes, End Plates.......................................................................................... 28
Hydraulic Top Link Cylinder…………………………………………………...42
Box Scrapers
3-pt Fixed Back Box Scraper ............................................................................... 29
Pull Type Box Scraper .......................................................................................... 32
Brackets - Optional Mounting Brackets for Front Loaders
Interfacing Quick Attach Brackets ......................................................................... 33-41
Brooms
3-pt. Rotary, Skid Steer Rotary…………………………………………………18
Hay Equipment
Three Point Attachments (Bale Spears, Bale Forks)............................................... 1
Front Loader Bucket Attachments (Bale Spear)..................................................... 2
Front Loader Attachments (Bale Spears, Bale Handlers)........................................ 3-4
John Deere & Global Integrated Frame Design ...................................................... 5-6
Skid Steer Attachments (Bale Spears, Bale Hand, Spin-off, Bale Unroller)…...8
RW Spin Off......................................................................................................... 6
Replacement Spears & Kits................................................................................... 7
Hitch Kits
2-pt Conversion Kits............................................................................................. 43-44
3-pt Hitch Kits...................................................................................................... 45-46
Landscape Rakes
3-pt Landscape Rakes .......................................................................................... 27
Pull Type Landscape Rakes................................................................................... 32
Material Handling Attachments
Front Loader Attachments (Grapple Rakes)........................................................... 9
Skid Steer Attachments (Grapple Rakes, Scrap Grapples) ..................................... 10-11
Compact Tractor Grapple & Brackets................................................................... 15
Pallet Forks……………………………………………………………………...13-14
Replacement Forks ............................................................................................... 42
3-pt. Mounted Crane Boom……………………………………………………..31
TABLE OF CONTENTS
Mixers
3-pt PTO Driven................................................................................................... 31
Skid Steer Mounted, Hydraulic Driven................................................................... 19
Post Drivers - Hydraulic
Complete Units………………………………………………………………20-21
Options................................................................................................................. 21
Return Line Packages............................................................................................ 22
Post Hole Diggers / Augers
PTO Driven Diggers.............................................................................................. 23
Hydraulic Driven Diggers....................................................................................... 23
Augers Standard / Heavy Duty.............................................................................. 25
Augers Industrial Duty........................................................................................... 26
Repair Parts .......................................................................................................... 42
Quick Hitches
3-pt Quick Hitches (Cat. I, II, III) ......................................................................... 31
Seeder / Spreaders
3-pt Cone Seeder / Spreaders............................................................................... 30
Electric Seeder / Spreaders ................................................................................... 30
ATV 1-bushel Seeder / Spreader .......................................................................... 32
Skid Steer Attachments
Agricultural (Bale Spears)...................................................................................... .8
Light Industrial (Pallet Forks, Grapple Rake) ………………………………10-13
Mixer…………………………………………………………………………….19
Tree Clipper……………………………………………………………………..19
Post Hole Digger………………………………………………………………...23
Small Attachments
3-pt Scoops, Platform Carrier, Boom Pole, pallet fork ........................................... 31
Stump Grinders
SmoothCut PTO and Hydraulic powered Stump Grinders...................................... 19
Tree Clippers
Tree Clipper (Front Loader, Skid Steer)................................................................ 19
Tillage
Small 3-pt Tillage (Ripper, Middle Buster)............................................................. 29
3-pt Tandem Disc Harrow..................................................................................... 29
Deep Tillage Roller Conditioner Attachments ......................................................... 47
Hay Handling Attachments
Designed for Use on Tractor 3-pt Hitch Only.
Product
Repl. Spear #831290
Repl. Spear #830928
Replacement Spears & Kits can be found on page 7.
Model
Item #
Description
3-pt Bale Spear. Rated for Round Bales
to 1,800 lbs. Main spear is tapered with
BSF-1523
830235
44” useable length. Features welded
balance spears. (Cat I / II) Ships UPS
Dual bolt-in spears
with, 42” useable length.
HS-3000
830775
Round bales maintain orientation.
Fits Cat I / II / Quick hitches.
BSFA-20
830920
HS-2200
832310
HS-330
832615
Repl. Spear #830928
Repl. Spear #830928
Adjustable height bale spear rated at
2,000 lbs. Bolt-in spear with useable
length of 42”. Spear adjusts up / down.
Fits Cat I / II. Two balance spears.
3-pt Bale Spear for Round Bales to
2,200 lbs. Bolt-in spear with useable
length of 42” Welded balance spikes.
Cat I / II quick hitch compatible.
Ships UPS.
3-pt. Triple Bale Spear rated 3,000 lbs.
Features bolt-in forged spears
(26”useable length) Cat. II & III.
For mid-size square bales.
Lbs.
List
57
220.00
78
370.00
78
360.00
72
310.00
163
620.00
251
890.00
144
499.00
186
670.00
310
930.00
26
299.00
Repl. Spear #830924
DBH-449
832610
F-1511
830030
F-3000
830101
HHU-2045
831340
TLC-3110
831619
Repl. Spear #830928
3-pt. Four Spear Bale Handler. Features
bolt-in forged spears(42” useable)
Overall width 96”.Cat.II & III
For two round bales - 4,000 lbs.
3-pt Bale Fork. Rated at 1,500 lbs. For
moving round bales. 3” x 2” patented
forks are internally reinforced. Forks are
55” long, spaced 37.5”. Fits Cat I /
Cat II Quick Hitches
3-pt Bale Fork. Rated at 3,000 lbs. For
moving round bales. 3” x 2” patented
forks are internally reinforced. Forks are
55” long, spaced 46.5”. Fits Cat I /
Cat II Quick Hitches
3-pt Hay Handler / Unroller. Rated at
2,000 lbs. For 4’and 5’ wide round bales
up to 6’ in diameter. Requires a 2.5” x
8” hydraulic cylinder (not included).
Fits Cat I / II quick hitches
Top Link Hydraulic Cylinder Cat. II
3” x 10” (21-1/4” ctr. / ctr. closed)
Note: All Weights shown are an estimated weight and do not include shipping materials.
1 (01/15/2011)
Designed for Use on Front Loader Buckets
Product
Repl. Spear #830928
Repl. Spear #830928
Model
Item #
Description
Bolt-on Bucket Bale Spear for round
bales. Rated at 2,000 lbs. Bolt-in spear
BBSF-20
830185
has useable length of 42”. Requires
drilling one 17/32” dia. hole in the
bucket. Bolt-together design.
Ships in one carton. (UPS)
Clamp-on Bucket Bale Spear for round
CBSF-2000
bales. Rated at 2,000 lbs. Uses chain &
830190
turnbuckle system. Bolt-in spear has
useable length of 42”. Bolt-together
design. Ships in one carton. (UPS)
Lbs.
List
65
280.00
76
325.00
102
510.00
180
610.00
832015
For pin-type loaders only. This unit is
rated at 2,200 lbs. Bolt-in spear has 42”
useable length. For use with round bales.
Includes pin-on brackets w / 1” pins.
Ships one carton
150
375.00
832020
For pin-type loaders only. This unit is
rated at 3,000 lbs. Bolt-in spears have
42” useable length. For use with round
bales. Includes pin-on brackets w / 1”
pins. Ships one carton
165
470.00
CBSF-2028
831920
Repl. Spear #830928
T-2000
832280
Clamp-on Bucket Dual Bale Spear for
round bales. Rated at 3,000 lbs. Uses
chain & turnbuckle. Bolt-in spears have
useable length of 42”. (Note: SPEARS
MUST BE INSERTED INTO BALE)
Clamp-on Bucket Bale Forks. Rated at
2,000 lbs. Uses chain & turnbuckle
system. Tubular forks are 3” x 2” and
50-3/4” in length. Upright backstop &
stabilizer spikes are included. (Note:
Don’t use as a spear or to lift pallets)
Designed for Use on Tractor Front Loaders
LSFB-22
Repl.Spear #830928
LSFB-28
Repl. Spear #830928
With the exception of the LSFB series, all units are priced less any brackets. Pin-on or quick attach
brackets must be ordered separately. (pgs. 31-38)
2 (01/15/2011)
Product
Model
Item #
Description
Lbs.
List
The FLBS Series is designed for use on tractor front loaders. Features all welded frame, cast steel
weld-on spear sockets (patent pending), and bolt-in spears for durability. 3 and 4 spear models
include sockets for optional uprights (831095), enabling the unit to handle two bales at once.
Instead of using #831110 bracket, consider SSB or SSRB Series Bale Spears, page 8.
Loader Bale Spear rated at 2,200 lbs.
Single tapered spear has useable length
FLBS-2200 832380
of 42” Optional interfacing brackets for
121
405.00
most quick attach systems available.
Repl. Spear #830928
FLBS-3000
832385
Repl. Spear #830928
FLBS-330
Repl. Spear #830924
832390
Shown with
optional
uprights
FLBS-340
832395
Repl. Spear #830928
FLBS-432
832405
FLBS-449
832410
Repl. Spear #830924
Repl. Spear #830928
Optional
Uprights
Option for FLBS Models
(Except FLBS-2200)
831095
Loader Bale Spear rated at 3,000 lbs.
Dual tapered spears have useable length
of 42”. Optional brackets for most quick
attach systems available.
Loader Bale Spear rated at 3,000 lbs for
handling mid-size square bales. Triple
spears have useable length of 26”, spaced
26-1/2” apart. Optional interfacing
brackets available.
Loader Bale Spear rated at 4,000 lbs for
larger square bales. Triple spears have
useable length of 42”, spaced 261/2”.
Optional interfacing brackets available.
Loader Bale Spear to handle mid-size
square bales. Features 79-1/2” wide
frame with 4 tapered spears - useable
length 26”, spaced 24”. Optional
interfacing brackets available.
Loader Bale Spear to handle large square
bales. 79-1/2” wide frame with 4 tapered
spears, useable length of 42”, spaced
24”. Optional interfacing brkts. available.
136
470.00
164
585.00
198
615.00
169
725.00
212
755.00
32
105.00
For handling two square bales. Fits
models FLBS-330 / 340 / 432 / 449
831815
Bolt on assembly allows FLBS
17
55.00
attachments to be used on a Cat. II 3-pt.
hitch.(also requires #830345 std. brkts.)
Note: On some multiple spear units, brackets may need to be welded to frame rather than bolted
due to loader arm spacing.
All units are priced less any brackets. Pin-on or quick attach brackets must be ordered separately.
(pgs. 31-38 )
3 (01/15/2011)
(pgs. 31-38 )
Product
Model
Item #
Description
Lbs.
List
TLC-3110 831619
Top Link Hydraulic Cylinder Cat II
26
299.00
3” x 10” (21-1/4” ctr. to ctr. closed)
Large Rectangular Bale Handler. Rated
at 4,000 lbs. Designed for tractor front
RBH-4000 831460
loaders only. Unit will handle either two
799 4,950.00
4’x4’x8’ or three 3’x3’x8’ rectangular
bales. Includes hydraulic cylinders.
Optional interfacing brackets for most
Loaders are available
Bale Hugger. Rated at 2,000 lbs
UBH-2000 832850
Designed to handle 4ft to 6ft round
401 1,725.00
bales. Features one stationary arm, one
opening arm. Hydraulic cylinder is
included. Optional interfacing brackets
are available. Not for 3-pt
Bale Hand. Rated at 2,200 lbs Designed
UBH-2072 832940
to handle 4-6 ft round bales. Both arms
520 1,950.00
open to clamp bale. Hydraulic cylinder is
included. Optional interfacing brackets
for most quick attach systems are
available. Not for 3-pt
4 (01/15/2011)
Integrated-Frame Design for John Deere Loaders-With Bolt-in Spears
Features all welded frame incorporating quick attach brackets welded to the unit.
For John Deere loaders using the Global carrier, see models on page 6.
Fits John Deere loaders: 300, 300CX, 305, 400X, 400CX, 410, 420, 430,
440, 460, 520, 521, 540, 541, 542, 553
NOTE: Make sure tractor and loader are rated to handle bale weight. Replacement spears page 7.
Product
Model
Item #
Description
Lbs.
List
Single bolt-in forged spear with useable
JDBS-412 832290
length of 42”. Rated at 2,200 lbs. Two
121
499.00
balance spikes, 1”x 8-1/2” useable.
Repl. Spear # 830928
JDBS-423
832320
JDBS-433
832330
Dual bolt-in forged spears spaced 26- ½”
apart, with useable length of 42”.
Rated at 3,000 lbs.
156
635.00
164
780.00
191
820.00
32
105.00
Repl. Spear # 830928
Triple bolt-in forged spears spaced 261/2” apart, 26” useable length. Rated at
3,000 lbs. For mid-sizes square bales.
Repl. Spear #830924
JDBS-434
832335
Upright Kit
831095
Triple bolt-in spears spaced 26-1/2”
apart, with useable length of 42”. 4,000
lb. Rating. For large-sized square bales.
Repl. Spear #830928
Optional bolt-on upright kit for handling
two square bales. For JDBS-433 & -434.
For John Deere loader models: 620, 640, 720, 721, 725, 726, 740, 741 and 746
JDBS-612
832340
Single bolt-in forged spear - 42” useable
length. Rated at 2,200 lbs. Two balance
spikes, 1”x 8-1/2”. For round bales.
JDBS-623
832350
Dual bolt-in forged spears spaced 30”
apart, with useable length of 42”.
Rated at 3,000lbs. For round bales
196
770.00
JDBS-633
832355
Triple bolt-in forged spears spaced 281/2” apart, useable length of 26”. Rated
at 3,000 lbs. For mid-sized square bales.
204
900.00
Repl. Spear #830928
Repl. Spear #830928
Repl. Spear #830924
176
665.00
Triple bolt-in forged spears spaced 28JDBS-634 832360
1/2” apart, with useable length of 42”.
231
950.00
Rated at 4,000 lbs. For large-sized
Repl. Spear #830928
square bales.
Upright Kit 831095
For JDBS-633 & 634.
32
105.00
Optional upright kit (831095) must be used when handling two bales with JDBS-433 / 434 / 633 / 634
Replacement Spears found on page 7.
5 (01/15/2011)
Euro / Global-Style Integrated Frame Bale Spears – With Bolt-in Spears
Features all welded frame that incorporates the Euro-Style quick attach brackets welded to
the unit. Designed to fit front loaders with the Global / Euro implement hook standard.
Features bolt-in forged spears.
Product
Repl. Spear #830928
Model
Item #
Description
Single bolt-in forged spear with useable
GLB-2200 832205
length of 42”. Two balance spikes, 1”x
8-1/2” useable. For round bales.
Rated at 2,200 lbs.
Dual bolt-in forged spears spaced 30”
GLB-3000 832220
apart, with useable length of 42”. For
round bales. Rated at 3,000 lbs.
Lbs.
List
130
455.00
144
545.00
179
680.00
195
710.00
Repl. Spear #830928
GLB-330
832245
Repl. Spear #830924
GLB-340
832240
Repl. Spear #830928
Triple bolt-in forged spears spaced 281/2” apart, with useable length of 26”.
Rated at 3,000 lbs.
For mid-sizes square bales.
Triple bolt-in forged spears spaced 281/2” apart, with useable length of 42”.
Rated at 4,000 lbs.
For large-sized square bales.
831095
32
105.00
two square bales. Fits GLB-330 / 340.
Optional upright kit (831095) must be used when handling two bales with GLB-330 / 340
Hydraulic RW Spin Off for Round Bales
Product
Model
Item #
FSO-906
831000
Pin Kit
830295
FLSO-907
831020
SSO-908
831030
Description
3-pt mounted hydraulically driven bale
spin off for Cat. II / III size tractors.
Requires 8-10 gpm of hydraulic flow.
Tapered forged spear, rated at 2,000 lbs.
Pin & Bushing Kit for FSO-906 to allow
use on Cat. 1 3-pt hitch tractors
Front Loader mounted hydraulically
driven bale spin off. Requires 8-10 gpm
of hydraulic flow. Tapered forged spear,
rated at 2,000 lbs. Opt. inter-facing
brackets(not included) for most quick
attach systems available – pages 30-37.
Skid Steer mounted hydraulically driven
bale spin off. Requires 8-10 gpm of hyd.
flow. Interfaces with “universal” SS
quick-attach. Rated at 2,000 lbs.
Lbs.
List
250
1,995.00
95.00
288
2,195.00
325
2,395.00
6 (01/15/2011)
Hay Handling attachments
Model
Item #
Description
Lbs
List
831290
1,800 lb replacement spear and nut only. 49” long
(44” useable)
21
79.00
831273
2,200 lb replacement spear only.
Includes Nut. 49” long. (44” useable)
17
99.00
830928
2,200 lb. Bolt-in replacement spear only.
47” long. (42” useable length)
21
99.00
23
115.00
20
129.00
32
195.00
29
129.00
26
109.00
21
109.00
12
85.00
831180
831190
830925
832215
832217
832214
830924
Boxed Forged replacement spear kit. Complete
with nut & sleeve, packaged in a carton. Rated
1,800 lbs. Weld in sleeve is 2” O.D.
49” long (44” useable)
Boxed Forged replacement spear kit. Complete
with nut, sleeve packaged in a carton. Rated
2,200 lbs. 49” long. (44” useable length) Weld in
sleeve is 2” O.D.
Bolt-on replacement forge spear kit. Includes
spear, mounting plate (for 3” x 3” square tube)
and hardware
Bolt-in replacement spear kit with cast steel
socket. Includes 47”spear, (42” useable length)
bolt, and casting that welds to your 3”x3”or larger
square frame. Spear rated at 2,200 lbs.
2,200 lb. Bolt-in replacement spear kit. Includes
47” spear, (42” useable length) sleeve, and bolt.
Weld in sleeve is 2 ¼” O.D.
Bolt-in replacement spear kit with weld-on cast
steel socket(Pat.Pend.) Includes 33½“ (26 ½
useable) spear, bolt and casting that welds to your
3”x 3”or larger square frame. Rated at 2200 lbs.
2,200 lb. Bolt-in replacement spear only. 33 ½”
long. (26 ½” useable)
7 (01/15/2011)
Designed for Front Loaders & Skid Steer Loaders
These products are manufactured to interface with the “Universal” skid steer quick attach mounting
Double check if unit was built prior to 1995
Product
Model
Item #
Description
Lbs.
List
Skid Steer Single Bale Spear. Rated at 2,200
lbs Designed to interface with ‘universal”
SSB-2200 831060
skid steer quick-attach system. Bolt-in
129
480.00
tapered spear has useable length of 42”
Repl. Spear
#830928
Repl. Spear
#830928
SSB-3000
831070
Skid Steer Double Bale Spear. Rated at 3,000
lbs Designed to interface with ‘universal”
skid steer quick-attach system. Bolt-in
tapered spears have useable length of 42”
146
570.00
Optional upright kit (831095) must be used when handling two bales with SSRB-330 / 340.
Skid Steer Triple Bale Spear. Rated at 4,000
lbs. For handling large-size square bales.
SSRB-340 831090
Bolt-in spears have useable length of 42”,
190
660.00
spaced
26-1/2”
apart.
Interfaces
with
Repl. Spear
“universal” skid steer quick-attach system
#830928
Skid Steer Triple Bale Spear. Rated at 3,000
lbs. For mid-size square bales. Bolt-in spears
SSRB-330 831080
have useable length of 26”, spaced 26-1/2”
165
640.00
apart.
Interfaces
with
“universal”
skid
steer
(Shown With
quick-attach system
Optional
Repl. Spear
#830924
Uprights)
Option for SSRB-340 &
SSRB-330
831095
Optional bolt on uprights for SSRB
For handling two square bales
Skid Steer Bale Hand. Rated at 2,200 lbs
Designed to handle 4 ft to 6 ft round bales.
SSBH-2072 832965
Both arms open to clamp bale. Hydraulic
cylinder is included. Interfaces with
“universal” skid steer quick-attach system
Skid Steer mounted hydraulically driven bale
SSO-908
831030
spin off. Requires 8-10 gpm of hydraulic
flow. Designed to interface with “universal”
skid steer quick-attach system.
Note: SSB and SSRB series will not fit Case model 1840.
Skid Steer Bale Handler / Unroller. Designed
for skid steers or front loaders with the
SSHU-2045 832485
“Universal” quick attach system. Rated at
2,000 lbs. For 4-ft. and 5-ft. wide round bales
up to 6-ft. in diameter. Requires a 2.5”x 8”
hydraulic cylinder. (not included)
8 (01/15/2011)
32
105.00
572
2,260.00
325
2,395.00
995.00
Units are priced less any brackets. Pin-on or quick attach brackets ordered separately. (pgs. 31-38 )
Product
Model
Item #
Description
Lbs.
List
Front Loader Split Top Grapple Rake. 62”
wide. Two upper grapples handle a variety of
FLGR-262 811380
materials. Two 2” x10” hydraulic cylinders.
704 2,810.00
Front Loader Split Top Grapple Rake. 77”
wide. Two upper grapples handle a variety of
FLGR-277 811400
materials. Two 2” x10” hydraulic cylinders.
804 3,225.00
Front Loader Root Rake. Ideal for pushing
RRFL-262 811420
piles of brush. Tines spaced 15-inches apart.
62” wide. Opt. interfacing brackets available.
378 1,560.00
RRFL-277
811425
Front Loader Root Rake. Ideal for pushing
piles of brush. Tines spaced 15-inches apart.
77” wide. Opt. interfacing brackets available.
523
1,870.00
Grapple Parking Stand Kit. Fits all grapples
except Low Profile models. Allows upright
26
165.00
storage and easy hook up on hard surfaces.
Global / Euro Style Integrated Frame Spilt Top Grapples
Features all welded frame that incorporates the Euro-Style implement hook standard integrated into them
allowing them to easily hook-up to the Euro / Global-Style quick-attach tool carrier.
Front Loader Split Top Integrated Grapple
FLGR-262G 811495
Rake 62” wide. Two upper grapples handle a
800 2,985.00
variety of materials. Two 2” x 10” hydraulic
cylinders. Integrated Euro / Global
implement hooks standard
Front Loader Split Top Integrated Grapple
FLGR-277G 811490
Rake 77” wide. Two upper grapples handle a
990 3,400.00
variety of materials. Two 2” x 10” hydraulic
cylinders. Integrated Euro / Global
implement hooks standard
Integrated ETG – Tine Grapple for John Deere 400 / 500 Series Loaders
Features all welded frame that incorporates the John Deere 400/500 series attachment brackets.
Low-Profile Tine Grapple, 61” wide w/
ETG-5-JD 811080
480
1,890.00
811395
ETG-6-JD
811085
single upper grapple for JD 400/500 series
loaders, includes hoses & couplers
Low-Profile Tine Grapple, 72” wide w/
single upper grapple for JD 400/500 series
loaders, includes hoses & couplers
510
9 (01/15/2011)
1,995.00
Designed for Use on Skid Steer Loaders
These products are manufactured to interface with the “Universal “ skid steer quick attach mounting.
Double check if unit was built prior to 1995.
Product
Model
Item #
Description
Lbs.
List
Low-Profile Tine Grapple for 30-80 hp
skid steers & tractor front loaders w/
“Universal” skid steer attaching system.
ETG-5
811020
61” wide w/ single upper grapple. 7
492
1,890.00
tines spaced 10”. Includes hyd hoses,
“connect under pressure” flat-faced
couplers.
Low-Profile Tine Grapple for 30-80 hp
skid steers & tractor front loaders w/
ETG-6
811025
“Universal” skid steer attaching system.
520
1,995.00
Same as ETG-5 above, but 72” wide, 8
tines spaced 10”.
Skid Steer Split Top Grapple Rake. Unit
is 62” wide with two upper grapples, for
SSGR-262 811435
handling a variety of materials. Unit is
784
3,020.00
equipped with two 2” x10” hyd.
cylinders.
Skid Steer Split Top Grapple Rake. Unit
is 77” wide with two upper grapples, for
SSGR-277 811440
handling a variety of materials. Unit is
964
3,435.00
equipped with two 2” x10” hyd.
cylinders.
Grapple Parking Stand Kit. Fits all
811395
grapples except Low Profile models.
26
165.00
Allows upright storage and easy hook
up on hard surfaces.
Skid Steer Root Rake, 62” wide. Ideal
RRSS-262 811445
for pushing piles of brush. Tines spaced
459
1,770.00
15-inches apart. Replaceable points.
RRSS-277
811450
SSTB3500
811140
Skid Steer Root Rake, 77” wide. Ideal
for pushing piles of brush. Tines spaced
15-inches apart. Replaceable points.
Skid Steer Tree Crane Boom. Ideal for
moving trees for transplanting. Booms’
overall length is 59.25-inches.Rated at
3,500 lbs.
603
2,080.00
182
620.00
10 (01/15/2011)
Designed for Use on Skid Steer Loaders
These products are manufactured to interface with the “Universal “ skid steer quick attach mounting.
Double check if unit was built prior to 1995.
Product
Model
Item #
Description
Lbs.
List
Heavy Duty Skid Steer Low Profile
Scrap Bucket. Cylinder guards protect
cylinders and components. 72” overall
LPSB-72 811780
width. Cutting edge is drilled to accept a
791
3,280.00
replaceable beveled cutting edge.
Complete with “connect under pressure”
flat-faced couplers
LPSB-78 811820
823
3,430.00
Scrap Bucket. Same as above,
but with 78” overall width.
LPSB-84 811860
855
3,690.00
Scrap Bucket. Same as above,
but with 84” overall width.
Bolt-on beveled cutting edge for LPSB811790
72. Reversible – protects/strengthens
115
385.00
original edge. ¾”x8”x72”.
Pre-drilled w/ hardware
811830 Bolt-on beveled cutting edge for LPSB125
415.00
811870 Bolt-on beveled cutting edge for LPSB135
445.00
Tine Grapple. Cylinder guards protect
LPTG-72
811750
cylinders and components. 72” overall
820
3,250.00
width. Tines spaced 5 ½”. Complete
with “connect under pressure”
flat-faced couplers
LPTG-78 811800
864
3,380.00
Tine Grapple. Same as above, but with
78” overall width
LPTG-84 811840
896
3,490.00
Tine Grapple. Same as above, but with
84” overall width.
11 (01/15/2011)
Manure Forks Designed for Use on Skid Steer Loaders / Tractor Loaders
These products (S-models) are manufactured to interface with the “Universal “ skid steer
quick attach system.
The JD-models is designed to interface with the John Deere 200 / 300 series Loaders
Product
Model
Item #
M/S-42JD
812300
M/S-60S
812305
M/S-72S
812315
M/SG-60S
812310
M/SG-72S
812320
Description
Manure / Silage Fork, 42-inches
in width. Unit features
6 -forged cranked tines spaced 7inches apart. Integrated mount to
interface with John Deere 200 /
300 series loaders
in width. Units features
8-forged cranked tines spaced 7inches apart. Integrated mount to
interface with “universal” skid
steer mounting system.
in width. Units features
10-forged cranked tines spaced 7inches apart. Integrated mount to
steer mounting system.
Manure / Silage Fork with upper
grapple, 60-inches in width. Unit
features 8-forged cranked tines
spaced 7-inches apart, 34-inch
wide upper grapples, hoses with
connect under pressure flat-faced
couplers and integrated mount to
steer mounting system
Manure / Silage Fork with upper
grapple, 72-inches in width. Unit
features 10-forged cranked tines
spaced 7-inches apart, 34-inch
wide upper grapples, hoses with
connect under pressure flat-faced
couplers and integrated mount to
steer mounting system
Lbs.
List
172
699.00
225
929.00
270
999.00
375
2,175.00
450
2,375.00
12 (01/15/2011)
Pallet Forks Designed for Use on Skid Steer Loaders
Interfaces with the “Universal “ skid steer quick attach mount. Check if unit was built before 1995.
Product
Model
Item #
Description
Lbs
List
Skid Steer Pallet Forks with step-through
SSPF-442
832400
backstop. Rated at 4,000 lbs. Rail style, 42”
345
940.00
x 1-1/4” x 4” solid forks w/ spring-loaded
toggle latch for positioning.
Skid Steer Pallet Forks with step-through
SSPF-448
832415
backstop. Rated at 4,000 lbs. Rail style, 48”
359
940.00
x 1-1/4” x 4” solid forks w/ spring-loaded
toggle latch for positioning.
Pallet Forks Designed for Use on Front Loaders
Rail Style Front Loader Pallet Forks. Rated
at 4,000 lbs. Solid 48” long (1-1/4” x 4”)
PF-448
831830
forks. Designed to mount to loaders with
438
center to center between arms up to 50”.
John Deere Integrated Frame Pallet Forks for 400/500 Series Loaders
Integrated frame pallet forks for John Deere
359
JDPF-5448 832435
400/500 series loaders, rated at 4,000 lbs.
Solid forks are 1-1/4”x 4”x 48” long.
345
JDPF-5442 832420
Solid forks are 1-1/4”x 4”x 42” long.
John Deere Integrated Frame Pallet Forks for 600 / 700 Series Loaders
JDPF-6748 832440
405
Solid forks are 1-1/2” x 4” x 48” long.
Integrated Frame Pallet Forks With Euro / Global Attaching Method
Integrated frame pallet forks for loaders
393
GLPF-5548 832460
with the Euro / Global attaching method.
Forks are 48” long (1 ½ “x 4”).
Rated at 5,500 lbs.
GLPF-442
832452
335
Forks are 42” long (1-1/4 “x 4”).
Rated at 4,000 lbs
GLPF-448
832458
350
Forks are 48” long (1-1/4 “x 4”).
Rated at 4,000 lbs
See Page 14 for Pallet Forks rated at 2,000 lbs for Compact Tractors
13 (01/15/2011)
960.00
940.00
940.00
1,135.00
1,025.00
940.00
940.00
Pallet Forks for Compact Tractors
Units feature Class I forks rated at 2,000 lbs for the pair.
FLPF-2000
832525
JDPF-2000
832530
SSPF-242
WSP
Rail style pallet forks Rated at 2,000 lbs.
Features solid forks, 1” x 3.5” x 42”, with
spring-loaded toggle latch for positioning.
Optional interfacing brackets for most quick
attach systems on page 15. For loaders with
ctr.-ctr. distance of 42” or less of
the loader arms. Not for 3-pt.
Cannot be used with 811275 bracket.
200/300 series loaders. Rail style rated at
2,000 lbs. Solid forks, 1”x 3.5”x 42” with
spring-loaded toggle latch for positioning.
Integrated frame pallet forks for compact
tractor loaders that utilize the “universal”
832520
skid steer attachment system. Rail style
rated at 2,000 lbs. Solid forks 1”x3.5”x42”
with spring-loaded toggle latch
for positioning
Weld-on Conversion Plate
Weld-on Plate simply welds to existing
832540
attachment to convert to “universal” quickattach mounting interface. CNC cut and
formed from ¼” hot rolled plate with solid
½” x 1-1/2” top bar.
270
750.00
280
799.00
290
660.00
46
139.00
78
340.00
102
380.00
168
620.00
Clamp-On Bucket Pallet Forks – Pair
BF-1000
831950
BF-2000
831930
BF-4000
831960
Clamp-On Bucket Pallet Forks – 1,000 lb.
capacity. 35”useable tine length. Fits most
loader buckets. Socket for 2x4 backstop.
14 (01/15/2011)
Grapple Rakes for Compact Tractors up to 40 HP
Model FLGR-4062 is priced less brackets. Brackets must be ordered separately (below).
Model FLGR-4062S design incorporates “universal” quick attach system.
Product
Model Item #
Description
Lbs.
List
Designed for Compact Tractor Front Loaders.
Grapple Rake is 60-inch wide for picking up
FLGR811460
hard to handle materials. Single cylinder
277 1,665.00
4062
controls upper grapple. Optional interfacing
brackets for most compact loaders available.
For Compact Tractor Front Loaders w/
“universal” quick attach system. 60-inch wide
FLGR811480
for picking up hard to handle materials.
355 1,770.00
4062S
Single cylinder controls upper grapple. Not
for skid steers (ETG Series Grapples page 10)
Interfacing Brackets for Compact Tractor Grapple Rake and ULF-2046 Pallet Fork
Model
Item #
Description
Lbs.
List
811235
Standard Pin-on Brackets. Designed for pin on
58
189.00
Loaders with 1” Pins (pair)
811220
Pin-on Brackets – Designed for pin-on loaders
58
189.00
with ¾” pins (pair)
811240
59
199.00
with 1-1/8” pins (pair)
811245
59
199.00
811250
60
199.00
Branson
811295
Branson Interfacing Brackets for Models
45
270.00
BL10A, BL20A
Case / IH
811255
Case/IH for LX-132 with 1-1/4” pins with large
59
225.00
offset (pair)
811260
John Deere Interfacing Brackets for models
55
John Deere
300, 300CX, 410, 420, 430, 440, 460, 400X
370.00
when used with FLGR-4062 / ULF-2046
Kubota
811280
Kubota Interfacing Brackets for Model LA1001
55
330.00
when using FLGR-4062 / ULF-2046
Kubota
811285
60
300.00
Kubota
811290
62
300.00
Massey
811265
MF Brackets for Models 1462, 1464, 1515,
58
330.00
Ferguson
1520, 1525, for FLGR-4062 / ULF-2046
TYM
811265
TYM Interfacing Brackets for Model TL-300
58
330.00
811275
Bolt-on “Universal” Skid Steer Style bracket
90
290.00
for FLGR-4062
NOTE: These interfacing brackets fit only compact tractor attachments.
Interfacing brackets for all other front loader attachments are listed on pages 31-38.
15 (01/15/2011)
Land Management Attachments
Snow Blades for Skid Steers & Front Loaders
All snow blades have trip springs for controlled break over in snow, or lock for light grading of loose dirt or gravel. All
have 3/8” x 6” reversible hard steel cutting edges and height adjustable skid shoes (6” x ½” thick) that rotate for long
wear. Manual angle adjustment is standard on 5-ft., 6-ft., & 7.5-ft. models (optional hyd. angle kits avail.). 9-ft. blades
have hyd. angle adj. & cross-over relief valve as std. equip. 7.5-ft. & 9-ft. models have 5° lateral oscillation feature as
std. equip.
Product
Model
Item #
Description
Lbs.
Recommended HP 35 – 80 / Maximum Operating Weight 8,000 lbs
HD 9-ft Snow Blade for Skid Steer Loaders.
5° lateral oscillation and hyd. angle adj. with
cross-over relief valve, 27” high moldboard.
SBS-27108A 360070
HD 9-ft Snow Blade for Tractor Front
Loaders. 5° lateral oscillation and hyd. angle
adj. With cross-over relief valve, 27” high
SBFL-27108A 360075
moldboard. Opt. interfacing brackets page 33-41.
HD 9-ft. Snow Blade for tractor front loaders
w/ Global / Euro carrier system. 5° degree
lateral oscillation and hyd. Angle adj. w/
SBG-27108A 360078
crossover relief valve, 27” high moldboard.
HD 9-ft. Snow Blade for JD 400/500 series
SBJD-27100A 360275
front loaders. 5° degree lateral oscillation and
hyd. Angle adj. w/ crossover relief valve,
27” high moldboard
Recommended HP 30 –80 / Maximum Operating Weight 8,000 lbs
HD 7.5-ft Snow Blade for Skid Steer Loaders.
5° lateral oscillation & man. angle adj. std.
SBS-2790A
360080
27” high moldboard.
Opt. Hyd. Angle Adj. Kit for SBS-2790A
installed on a skid steer. Cylinders, 6’ hoses /
360165
flat faced “connect under pressure” couplers
HD 7.5-ft Snow Blade for Tractor Front
Loaders.
5° lateral oscillation and man. angle
SBFL-2790A
360085
adj. std. 27” high moldboard. Opt. interfacing
brackets on pg. 33-41.
HD 7.5-ft. Snow Blade for tractor front
loaders w/ Global / Euro carrier system. 5°
SBG-2790A
360090
lateral oscillation and man. Angle adj. std. 27”
high moldboard.
SBJD-2790A 360270 HD 7.5-ft. Snow Blade for JD 400/500 series
front loaders. 5° lateral oscillation and man.
Angle adj. std. 27” high moldboard
Opt. Hyd. Angle Adj. Kit for SBFL-2790A,
SBG-2790A, or SBS-2790A installed on a
front
loader. Incl. cylinders, fittings / hoses
360168
between cylinders. Does not include remote
hoses / quick couplers.
Opt. crossover relief valve. Fits all hyd. angle
360065 adj. kits for snow blades. Protects blade from
damage.
List
665
3,520.00
690
3,460.00
3,520.00
3,590.00
530
2,515.00
45
510.00
555
2,455.00
2,515.00
2,650.00
40
310.00
7
235.00
16 (01/15/2011)
Snow Blades for Skid Steers & Front Loaders
Designed for Tractors and Skid Steers 40 hp and Less
All snow blades have trip springs for controlled break over in snow and lock for light grading of loose dirt or gravel. All
have 3/8” x 6” reversible hard steel cutting edge and height adjustable skid shoes (6” x ½” thick) that rotate for long
wear. Manual angle adjustment is standard on 5-ft., 6-ft. models
Product
Model
Item #
Description
Lbs.
Recommended HP 25 - 45 / Maximum Operating Weight 4,500 lbs
6-ft. Snow Blade for compact tractors 40-hp
or less w/ loaders that utilize the “Universal”
SBS-2172
360130
350
quick-attach system. 21” high moldboard.
or less. 21” high moldboard. Shipped less
SBFL-2172
360160
366
brackets. Optional interfacing brackets listed
on page 15.
SBJD-2172
360255 6-ft Snow Blade for JD 200, 300, 400 loaders
equipped with JD QA System.
Recommended HP 25 - 45 / Maximum Operating Weight 4,500 lbs
SBS-2160
or less w/ loaders that utilize the “Universal”
360100
334
quick-attach system. 21” high moldboard.
or less. 21” high moldboard. Shipped less
SBFL-2160
360140
347
brackets. Optional interfacing brackets listed
on page 15.
SBJD-2160
360250 5-ft Snow Blade for JD 200, 300, 400 loaders
equipped with JD QA System.
Optional Hydraulic Angle Adjustment Kit for
SBS & SBFL - 5-ft and 6-ft. snow blades.
Includes
cylinders, fittings and hoses between
360170
40
cylinders. Does not include hoses to tractor
remotes or quick couplers.
Optional crossover relief valve. Fits all
hydraulic angle adjustment kits for snow
360065
7
blades. Protects blade from damage.
Clamp-On Snow Blades for Compact Tractors up to 35 hp
6-ft Clamp-on Snow Blade for compact
360290
SBC-2172
SBC-2160
360280
tractors. Uses chain & turnbuckle system 21”
high moldboard
5-ft Clamp-on Snow Blade for compact
tractors. Uses chain & turnbuckle system 21”
high moldboard
List
1,910.00
1,825.00
1.940.00
1,850.00
1,800.00
1,835.00
$365.00
235.00
305
1,680.00
331
1,630.00
360220
Optional top deflector for 5-ft. blade
360223
Snow Options Below Fit Blades on Page 16 & 17.
360227
Optional top deflector for 7.5-ft. blade
360230
Optional
sight indicator for all snow blades
360235
models.
17 (01/15/2011)
$115.00
$135.00
$155.00
$195.00
$39.00
Rotary Brooms
Brooms angle 30-degrees right or left, and height adjustment chains maintain even operating position.
Available in 32” diameter poly (P) or poly /wire (PW) combination. Parking stand standard.
Either manual or hydraulic angle adjustment kit is required.
NOTE: For complete broom assembly, choose broom from Group I, and kit from Group 2 below.
Group 1 – Base Broom
PTO Driven Double Gearbox Drive
Product
Model
Item #
Description
Lbs.
List
RMB-325P
610705
5-ft. Wide Poly Broom. Angle kit req.
4,600.00
Cat. I Quick Hitch compatible.
640
RMB-325PW
610700
5-ft. Wide Poly / Wire Broom. Angle
kit req. Cat. I Quick Hitch compatible.
640
4,600.00
4,810.00
RMB-326P
610755
740
RMB-326PW
610750
kit req. Cat. I Quick Hitch compatible
740
4,810.00
RMB-327P
610805
840
5,250.00
RMB-327PW
610800
kit req. Cat. I Quick Hitch compatible
840
5,250.00
Skid Steer Mount Hydraulic Drive
SSMB-325P
610961
4,910.00
SSMB-325PW 610960
5-ft. Wide Poly / Wire Broom.
Angle kit required.
714
4,910.00
SSMB-326P
610966
5,230.00
SSMB-326PW 610965
Angle kit required.
774
5,230.00
SSMB-327P
610971
5,760.00
SSMB-327PW 610970
Angle kit required.
833
5,760.00
Group 2 – Angle Adjustment Kit
Item #
Description
Lbs.
List
610702
Manual Angle Adjustment Kit
6
130.00
610703
Hydraulic Angle Adjustment Kit. Includes cylinder, hoses less tips.
400.00
Use on units with two sets of remote couplers.
Hydraulic Angle Adjustment Kit with elec. hydraulic solenoid
610940
control. For skid steer rotary brooms used on units equipped with
1,279.00
only one set of remotes. Includes cylinder, hoses, valve,
& flat-faced couplers. Factory installed.
Note: All broom prices include a well-built crate and can be stacked and shipped 2-high.
610950
Field Installed Hydraulic Kit
Field Installed Hydraulic Angle Adjustment Kit with elec. hydraulic
solenoid control. For skid steer rotary brooms used on units
equipped with only one set of remotes. Includes cylinder, hoses,
valve, & flat-faced couplers..
18 (01/15/2011)
1,299.00
(pgs. 31-38 )
Product
Model
Item #
Description
Lbs.
List
Loader Mounted Tree Clipper. Solves
the problem of trimming hard to reach
TC-8-FL 811300
branches and unwanted trees. Cuts
702 4,740.00
trees up to 8” in dia. Min. hyd.
pressure - 2,000 psi
Optional Solenoid Kit for Tree
Solenoid Kit
811360
Clipper. Allows TC 8 to be used on
25
895.00
units equipped with only one remote
Designed for Use on Tractor 3-pt Hitch
SG-26
811500
SG – 36
811550
Replacement Teeth
811600
3-pt mounted PTO driven SmoothCut
stump grinder. Features 26” dia.
Cutting wheel, carbide steel bolt in
teeth. Includes parking stand.
Designed for tractors 22- 50 hp
Same features as above. Larger 36”
dia. cutting wheel. Designed for
tractors 45-100 hp
Box of 12 Carbide teeth for SG-26 /
SG-36, with bolts & washers
660
5,300.00
880
6,100.00
2
210.00
757
7,200.00
710
5,900.00
395
3,400.00
3
170.00
Designed for use on Skid Steer Loaders
SG-26H
811640
TC-8-SS
811305
SS-590
780950
2505650
Skid Steer Stump Grinder. 26” dia.
SmoothCut wheel w/ carbide steel
bolt in teeth. Req. one pair of hyd.
remotes. Incl. parking stand & flatfaced couplers. Req. 15-25 gpm flow.
Skid Steer Mounted Tree Clipper.
CutS trees up to 8” dia. Solenoid
valve is std., allowing the operator to
control cutting and rotating from a
single remote. Min. hyd. pressure
2000 psi. Hoses, less ends, included
Skid Steer Mixer. 5 Cu. Ft. (1 bag
mix). Hydraulic driven mixer with
parking stands. Internally welded
mixing paddles for proper mixing.
Includes flow control valve (on/off)
for easy operation. Hoses includes
flat-faced couplers.
Flat-Faced Coupler Set interfaces w/
standard ends on our SS attachments.
1 ea. ½” male 1 ea. ½” female coupler
19 (01/15/2011)
Fence Building Attachments
Hydraulic Post Drivers (Wood / Steel Post)
Complete Drivers (including mounts) for Tractors or Skid Steers. Skid Steer units are designed with
“Universal” style quick attach, return line fitting kit is required, unless noted.
Note: All post drivers now include a Post Holder as standard equipment. (see page 21)
Product
Model
Item #
Description
Lbs.
List
Center Mount for Tractor 3-pt (Cat I/II).
HPD-16
814400
Manual Adjustment driver w/ stabilizer legs.
600
3,140.00
Maximum post size 5” x 9’
HPD-16 HFL 814835
Front Loader Mounted all Hydraulic
1125 5,930.00
Adjustment driver. Maximum post size 6” x 9’
HPD-16MSS 814628
Skid Steer Mounted all Manual Adjustment
678
3,920.00
Maximum post size 6” x9’
HPD-16HSS 814630
Skid Steer Mounted all Hydraulic Adjustment
950
6,150.00
driver. Maximum post size 6” x 9’
Skid Steer Mounted self-contained all
HPD815020
Hydraulic Adjustment driver. No special
1283 9,180.00
16HSS/P
return line fittings are required. Maximum
post size 6” x 9’
Center Mount for Tractor 3-pt (Cat. I/II). All
HPD-16SHC 814825
Hydraulic Adjustment driver.
875
5,300.00
Offset Mount for Tractor 3-pt (Cat. I/II) All
HPD-16SWO 814855
1683 9,225.00
Center Mount for Tractor 3-pt (Cat I/II).
HPD-20
814500
Manual Adjustment driver w/ stabilizer legs.
795
4,275.00
Maximum post size 8-3/4” x 10’
Front Loader Mounted all Hydraulic
HPD-20 HFL 814935
Adjustment driver.
1275 7,065.00
HPD-20MSS 814633
Skid Steer Mounted all Manual Adjustment
828
5,055.00
Maximum post size 8-3/4” x10’
HPD-20HSS 814635
Skid Steer Mounted all Hydraulic Adjustment
1245 7,285.00
driver. Maximum post size 8-3/4” x 10’
HPD815025
1385 10,315.00
20HSS/P
post size 8-3/4” x 10’
Center Mount for Tractor 3-pt (Cat. I/II). All
HPD-20 SHC 814925
1035 6,43500
Offset Mount for Tractor 3-pt (Cat. I/II) All
HPD-20SWO 814955
1878 10,360.00
Note: MSS & HSS models for skid steer loaders require the purchase of a return line package for proper operation.
20 (01/15/2011)
Hydraulic Post Drivers (Wood / Steel Post)
Complete Drivers(including mount) for Tractors or Skid Steers. Skid Steer units are designed with
“Universal” style quick attach, return line fitting kit is required, unless noted. Post Holder Standard.
Product
Model
Item #
Description
Lbs.
List
Center Mount for Tractor 3-pt (Cat. II).
HPD-24SHC 814983
All Hydraulic Adjustment driver.
1215 7,760.00
HPD814982
Skid Steer Mounted all Hydraulic
1429 8,610.00
24HSS
Adjustment driver. Maximum post size
11” x 10’
HPD815030
1575 11,640.00
24HSS/P
post size 11” x 10’
Offset Mount for Tractor 3-pt (Cat. II) All
HPD814984
2194 11,685.00
24SWO
Post Driver Accessories and Mounts.
Mounting Kits are listed to allow conversion of standard Post Driver.
Fits Worksaver hydraulic post drivers
previously manufactured without post
Post Holder 815130
holders. Spring loaded, holds post in
position until post is started.
Not for “T” posts. Can ship UPS.
Manual Mount Kits
Manual Adjustment Base with 3-pt mount
For 3-pt Only
814580
and stabilizer legs
Front Loader Mount
814845
814637
814610
Skid Steer Mounts
815000
814680
Hydraulic Mount Kits
For 3-pt Only
814805
814490
Hydraulic Front Loader Mount (HFL)
For models 16 & 20 drivers only.
(Optional Q.A. Brackets pg. 33-41)
Manual Adjustment (MSS) mount for
Skid Steer. Models 16 & 20 drivers only.
Hydraulic Adjustment (HSS) mount for
Skid Steer. Models 16, 20 & 24 drivers
Optional Hydraulic Power Package for
hydraulic adjustment Skid Steer mounts.
Contains, hydraulic motor w/selfcontained hydraulic system.
(Use with mount 814610)
Hydraulic adj. center mount (SHC) only
for HPD-16, 20, & 24 drivers.
Offset Pivot Mount (SWO) for Models
16, 20 & 24 drivers.
Includes hydraulic package
Adapter for steel “T”posts
25
190.00
168
995.00
675
3,785.00
193
1,775.00
514
4,005.00
201
3,030.00
380
3,155.00
933
7,080.00
11
85.00
Note: MSS & HSS models for skid steer loaders require the purchase of a return line package for proper operation.
21 (01/15/2011)
Return Line Kits for Skid Steer Mounted Post Drivers
Return Line kits are required for all MSS & HSS (except HSS/P) models. These kits contain fittings to
allow the oil to be returned to the hydraulic reservoir.
Product
Model
Item #
Description
Lbs.
List
Return
line
fittings,
hoses,
and
hardware
for
S200,
Bobcat
814905
5
135.00
S250, S300, S330, T250, T300, T320, T630, T650
except 773G & 873G
(Note: approx. 4” dia. screw type plastic cap)
Bobcat
814908
Case
815105
Case
814915
Case
814915
Thomas
814915
Daewoo
814915
John Deere
814910
John Deere
200-Series
John Deere
814920
John Deere
815075
John Deere
815110
Gehl
814895
Mustang
814940
New Holland
814910
815075
For Models S130, S150, S160, S175, S185,
T140, T190 (Rubber plug type cap)
For most 1835, 1835B, 1835C, 1840, 1845,
1845B & 1845C (Large Diameter Cap)
For Models 410,420,430,440,435,445,450,465
Return line fitting
For Models 40XT, 60XT, 70XT, 75XT,
85XT, 90XT, 95XT Return line fitting
For All Models including 85, 105, 137, 153,
175, 205, 250, 255 Return line fitting
For All Models including 430, 440, 450, 460
Return line fitting
For Units prior to 1/99 Return line fittings,
hose and hardware
For early 200-series return line fittings, hose
and hardware.
For late models 260, 270, 280 with screw type
hydraulic reservoir cap, return line fittings
For Models 317,320, 325, 328, 332 return line
fittings (Side panel must be removed)
For Models 313, 315, 318D, 319D, 320D,
323D, 326D, 328D, 329D, 332D, 333D
Return line fitting
For All Models including SL 3635 SX,
SL3935 SX, SL 4640, SL 4840, SL 5640, SL
6640, SL 7810 Return line fitting
For All Models including 2022, 2032, 2044,
2054, 2066, 2076, 2086, 2099, 2109 Return
line fitting
For All Models including LS120, LS125,
LS140, LS150, LS160, LS170, LS175, LS180,
LS185.B, LS190.B Return line fittings, hose
& hardware
6
135.00
7
225.00
6
225.00
6
225.00
6
225.00
6
225.00
6
225.00
6
195.00
6
135.00
6
135.00
6
195.00
7
135.00
6
145.00
6
225.00
Note: Every attempt has been made to provide return line packages for current skid steer loader models. However, some models are not adaptable (i.e.:
Caterpillar Models, ASV Posi-Track and others). They can be fit with a hydraulic post driver by using a HSS/P model, which is a self-contained units and
requires no return line fitting. If you have questions, please consult the factory.
22 (01/15/2011)
Post Hole Diggers, PTO & Hydraulic Driven
Product
Post Hole Diggers for Tractors or Skid Steers.. Prices shown are less auger.
Model
Item #
Description
Lbs.
Low-profile model, 3-pt mounted. PTO
driven with shear-bolt protection. For sub300
170545
compact tractors (14-24 hp). Cat. O with 7/8’
149
pins. Requires use of 30” long augers.
Ships in one carton. (Uses 6”-12” augers)
Standard-duty model, 3-pt mounted. PTO
500
170990
driven. Shear-bolt protected. (6”-12” augers)
160
Cat. I/II with 7/8” pins. Ships in one carton.
720
706160
925
709540
614HC
702090
624HC
702095
714HC
702100
724HC
702105
814HC
702110
824HC
702115
Heavy-duty 3-pt mounted. PTO driven.
Shear-bolt protected. (6” –24” augers)
Industrial-duty 3-pt mounted. PTO driven.
Shear-bolt protected. (6” – 30” augers)
3-pt mounted Post Hole Digger. Hydraulically
driven. Requires 5 – 10 gpm Hydraulic Flow
@1500-3000 psi. (6”-14” augers)
Includes hoses less ends.
3-pt mounted Post Hole Digger. Hydraulically
driven. Requires 10 – 20 gpm hydraulic flow.
@1500-3000 psi. (6”-24” augers)
Includes hoses less ends.
Hydraulic, Bolts on side of loader bucket.
Requires 5 – 10 gpm hydraulic flow
@1500-3000 psi. (6”-14” augers) Less hoses.
Hydraulic, Bolts on side of loader bucket.
Requires 10 – 20 gpm hydraulic flow
@1500-3000 psi. Less hoses. (Uses 6”-24”)
Hydraulic, Clamp-on mount. Requires 5-10
gpm @ 1500-3000 psi (Uses 6”-14” augers)
Less hoses
Hydraulic, Clamp-on mount Requires 10-20
gpm @ 1500-3000 psi (Uses 6”-24” augers)
Less hoses
List
759.00
779.00
206
999.00
210
1,255.00
180
1,770.00
182
1,800.00
125
1,630.00
127
1,650.00
194
1,790.00
196
1,810.00
Hydraulic Post Hole Diggers for Skid Steer and Euro mount
Are list on Page 24
23 (01/15/2011)
Post Hole Diggers, PTO & Hydraulic Driven
Product
Post Hole Diggers for Tractors or Skid Steers.. Prices shown are less auger.
Model
Item #
Description
Lbs.
“Universal” Skid Steer Mount. Hydraulically
924HC
702125 Driven. Requires 10-20 gpm @1500-3000 psi. 210
( 6”-24” augers) Less Hoses
914HC
702120
“Universal” Skid Steer Mount. Hydraulically
driven. Requires 5-10 gpm @ 1500-3000 psi.
208
For tractor front loaders with “Universal” skid
steer mount. (less hoses)
924HC/Euro 702135
Euro / Global Mount. Hydraulically Driven.
220
Requires 10 – 20 gpm @ 1500-3000 psi
(6”-24” augers) Less Hoses.
List
1,710.00
1,680.00
1,680.00
Post Hole Diggers Accessories
Product
Model
Item #
Description
Lbs.
List
Optional Down Force Kits for Increased Digging Pressure.
Recommended when using IDA, IDRA & IDDRA Augers.
DFK-50
170810
Down Force Kit for Model 500 PHD.
Includes Hydraulic cylinder & hoses
DFK-70
706080
Down For Kit For Models 720, 614HC &
624HC. Includes Hydraulic cylinder & hoses
DFK-90
709025
Down Force Kit for Model 925 PHD.
Includes Hydraulic cylinders & hoses
39
415.00
40
415.00
42
415.00
Parking Stand Kits for Post Hole Diggers
102160
Parking Stand Kit for Model 300 PHD
11
95.00
102165
Parking Stand Kit for Models 500/720 PHD
12
100.00
102170
Parking Stand Kit for Model 925 PHD
13
110.00
Input / Output Replacement Guard Kits for Older Worksaver Post Hole Diggers Only
For Model 500 Post Hole Digger with Curtis
170520
Gearbox. (Note: Gearbox has cast hole for
9
35.00
INSTALL SAFETY
handle on side)
SHIELDS ON ANY AND
For Model 500 Post Hole Digger with Comer
ALL OLDER POST
170525
Gearbox (Note: No threaded holes in bottom
8
35.00
HOLE DIGGERS
of gearbox)
For Model 500 Post Hole Digger with Comer
Kits include mounting
170530
Gearbox (Note: Threaded holes in bottom of
7
35.00
hardware and safety signs.
gearbox)
170535
For Model 706 Post Hole Digger with Omni
9
35.00
Gearbox
170540
Guard for 12” Auger Extension manufactured
4
35.00
prior to 1/96 (Note: need to drill hole)
24 (01/15/2011)
Augers for Standard to Moderate Digging Conditions
All Augers are for 2” O.D. round output shafts only. Retained by two ½” bolt 90 degrees apart.
All Augers feature a Bolt-in Fishtail Center Point.
Product
Model
Item #
Description
Lbs.
List
30 Inch Long Augers for use with Model 300 Post Hole Digger Only
6” SF
170575
6” Single Flight Augers with Teeth
19
160.00
9” SF
170565
25
165.00
12” SF
170570
28
170.00
42 Inch Long Augers for All Models except Model 300
9” SF
170710
9” Std. Duty Single Flight Auger with teeth
28
165.00
12” SF
170720
32
170.00
6” SF
170585
20
160.00
6” HDSF
706150
6” HD Single Flight Auger with teeth.
22
180.00
6” HDDF
706155
6” HD Double Flight Auger with teeth
32
200.00
9” HDSF
706109
37
210.00
9” HDDF
706009
9” HD Double Flight Auger with teeth.
47
230.00
12” HDSF
706112
46
240.00
12” HDDF
706012
54
270.00
14” HDSF
706033
62
290.00
14” HDDF
706037
76
330.00
18” HDDF
706070
98
480.00
24” HDDF
706075
128
645.00
30” HDDF
709045
190
835.00
Landscape Augers
18” HDDFP
706018
24” HDDFP
706024
18” HD Double Flight Auger with 9” Pilot
with teeth and fish tail center point
24” HD Double Flight Auger with 9” Pilot
with teeth and fish tail center point
108
670.00
138
835.00
Extension & Replacement Center Point
170705
12” Auger Extension with guard
16
150.00
Fish Tail Center Point. Fish tail point is more
170802
aggressive than a screw type point. 1-1/4”
4
39.00
threaded top. (not for drilling through rocks)
170430
Bolt-in Fish Tail Center Point
4
39.00
Note: $10 packaging charge for Augers shipped UPS (under 70 lbs) Only. Larger Augers ship LTL
25 (01/15/2011)
Industrial Duty Dirt & Rock Augers
For Models 720, 925 and Hydraulic Diggers Only (Not for models 300 or 500)
Product
Model
Item #
Description
Lbs.
List
Industrial Duty Augers for drilling in difficult ground conditions, heavy clay, asphalt, frozen ground and
loose rock. Recommend use of down force kit with digger.
6” IDA
706210
6” IDA, 3/8” Double Flight Auger with cast
51
825.00
boring head, Pengo style teeth and fish tail pt.
9” IDA
706220
81
920.00
12” IDA
706230
92
945.00
Industrial Duty Dirt & Rock Augers for drilling dirt, clay loose rock, solid rock & concrete. Optional
down force kit recommended with models 720 / 925 diggers.
6” IDRA 3/8” Double Flight Auger with ¾”
6” IDRA
706310
thick double boring head, 6-carbide bullet
53
1,250.00
teeth for tough digging.
9” IDDRA 3/8” Double Flight Auger with ¾”
9” IDDRA
706350
thick double boring head, 8-carbide bullet
102
1,455.00
teeth for tough digging conditions.
12” IDDRA 3/8” Double Flight Auger with
12” IDDRA 706360
¾” thick double boring head, 12-carbide bullet
107
1,855.00
teeth for tough digging conditions.
Note: $10 packaging charge for Augers shipped UPS (under 70 lbs) Only. Larger Augers ship LTL
26 (01/15/2011)
Acreage Attachments
Landscape Rakes
Units feature 5/16” x 1” tines, individually bolted to the tinebar.
Tractor 3-pt mounted attachments
Product
Model
Item #
Description
Lbs.
List
4-ft Economy Landscape Rake for 3-pt hitch.
DCR-4
341700
Cat. 0/I shipped with 7/8” pins
124
489.00
For Tractors up to 25 hp
5-ft Economy Landscape Rake for 3-pt hitch.
DCR-5
341710
134
550.00
MCR-6
341890
6-ft Std-duty Landscape Rake for 3-pt hitch
187
635.00
Cat. I (7/8” pins) For Tractors up to 40 hp
MCR-7
341880
7-ft Std-duty Landscape Rake for 3-pt hitch
199
665.00
Cat. I (7/8” pins) For Tractors up to 40 hp
LRHD Landscape Rakes are Cat. I Quick Hitch Compatible. Includes Parking Stand
6-ft Heavy Duty Landscape Rake for
LRHD-6
342240
3-pt hitch. Cat. I (7/8” pins)
279
940.00
LRHD-7
342250
330
980.00
LRHD-8
342255
365
1,050.00
Landscape Rake Flip-Down Blades & Gauge Wheel Kits
SGW-10
DGW-20
341986
341987
341988
341785
341775
6-ft. Flip-Down Blade Kit for LRHD-6
Single Gauge Wheel Kit for DCR / MCR
Dual Gauge Wheel Kit for MCR / LRHD
Also will fit prior HLR-series rakes
62
69
75
26
57
27 (01/15/2011)
289.00
299.00
309.00
210.00
385.00
Acreage Attachments
Tractor 3-pt. Mounted Rear Blades
Product
Model
Item #
Description
Lbs.
4-ft Economy Rear Blade for 3-pt hitch. For
DC-4
345600
Tractors up to 25 hp. Cat. 0/I., shipped with
114
7/8” pins. Moldboard height 10.”
5-ft Economy Rear Blade for 3-pt hitch. For
DC-5
345500
Tractors up to 25 hp. Cat. 0/I., shipped with
126
7/8” pins. Moldboard height 10.”
6-ft Economy Rear Blade for 3-pt Hitch Cat. I
MCRB-72
346775
with 7/8” pins. Moldboard height is 12” with
185
reversible 6” cutting edge.
6-ft Standard-duty Rear Blade for 3-pt hitch.
RB-1272
346705
Cat. I with 7/8” pins. Moldboard height is 12”
190
½” x 6” cutting edge. For Tractors up to 40 hp
7-ft Standard-duty Rear Blade for 3-pt hitch.
RB-1284
346715
Cat. I with 7/8” pins. Moldboard height is 12”
206
½” x 6” cutting edge. For Tractors up to 40 hp
RBHD Blades are Cat. I Quick Hitch Compatible. Includes Parking Stand
6-ft Utility Rear Blade with offset for 3-pt
RBHD-6
346780
hitch. Cat. I with 7/8” pins. Will fit Cat. I
275
quick-hitch. Bolt-on ½” x 6” cutting edge.
7-ft Utility Rear Blade with offset for 3-pt
RBHD-7
346785
300
quick-hitch. Bolt-on ½” x 6” cutting edge.
6-ft Utility Rear Blade with offset / tilt for 3-pt
RBHD-6-T
346790
306
quich-hitch. Bolt-on ½” x 6” cutting edge
7-ft Utility Rear Blade with offset / tilt for 3-pt
RBHD-7-T
346795
331
quick-hitch. Bolt-on ½” x 6” cutting edge
SK-4
320035
Skid Shoes for EB series only (pair)
9
SK-5
343435
Skid Shoes for RB & MCRB series only (pair)
9
SK-8
346745
Skid Shoes for RBHD and older
24
URB / UB series only (pair)
EP-40
346765
End Plates for URB / RBHD series only (pair)
44
28 (01/15/2011)
List
335.00
345.00
470.00
535.00
575.00
695.00
715.00
835.00
875.00
55.00
60.00
230.00
200.00
Acreage Attachments
Small Tillage
Product
Model
ER-30
MBP-36
R-130
Tractor 3-pt mounted attachments
Item #
Description
3-pt mounted Economy Ripper. Reversible
800420
point, unit is shear-bolt protected.
Cat. 0/I shipped with 7/8” pins.
3-pt mounted Economy Middle Buster. Unit
800400
has 15” shovel, shear-bolt protected.
3-pt mounted Heavy-duty Single Shank
800120
Ripper. Unit features 30” long shank, shearbolt protected. Cat. I/II shipped with 7/8”
pins, frame width is 31”.
Minimum hp requirement is 30 hp
Lbs.
List
66
290.00
77
300.00
218
750.00
Lbs.
374
List
1,029.00
362
1,029.00
368
1,029.00
474
1,199.00
462
1,199.00
468
1,199.00
320
605.00
378
675.00
428
780.00
469
985.00
516
1,125.00
Tandem Disc Harrows
Product
Model
DH-55-16P
DH-55-16N
DH-55-16C
DH-65-16P
DH-65-16N
DH-65-16C
Tractor 3-pt mounted Disc Harrows w/ cast bearings
Item #
Description
940354
5-1/2 ft. Tandem Disc with 16” plain blades
Cat. I (7/8” pins)
940352
5-1/2 ft. Tandem Disc with 16” notched
blades Cat. I (7/8” pins)
940350
5-1/2 ft. Tandem Disc with 16’ notched
blades in the front and plain blades in the rear.
940364
6-1/2 ft. Tandem Disc with 16” plain blades
940362
blades Cat. I (7/8” pins)
940360
blades in the front and plain blades in the rear
Box Scrapers
Fixed back design with reversible 6” cutting edges. Cat. I (7/8” pins)
SBX-4
341320
4-ft Std. (3 Shanks) For Tractors 18 –25 hp
Will fit Cat. I quick hitch
SBX-5
341325
5-ft Std (4 Shanks) For Tractors 20-32 hp
SBX-6
341335
6 –ft Std (5 Shanks) For Tractors 25 – 40 hp
SBX-7
341340
7-ft Std (6 Shanks) For Tractors 25 –40 hp
SBX-8
341345
8-ft Std (7 Shanks) For Tractors 35 – 45 hp
29 (01/15/2011)
Acreage Attachments
Seeders / Spreaders – PTO Driven
Product
Model
CS-394
CS-694
CS-1094
CSP-1094
ES1.5
ES1.5 PKP
ES-33
Tractor 3-pt mounted Cat I w/ 7/8” pins
Item #
Description
3-bushel steel cone PTO Seeder / Spreader.
420775
Designed for compact tractors.
Holds approximately 240 lbs
420700
Designed for standard tractors.
420800
Designed for larger tractors.
10-bushel Poly cone PTO Seeder / Spreader.
420850
Designed for larger tractors.
420725
Optional wheel-type lime agitator for CS
series cone seeders
Electric Seeders / Spreaders
480001
1.5-bushel draw bar mounted steel hopper
electric seeder / spreader. Can ship UPS
1.5-bushel electric seeder / spreader for
480035
mounting to pick-up truck 2” hitch receiver.
Can ship UPS
420500
3-bushel draw bar mounted steel hopper
electric seeder / spreader
Lbs.
List
105
620.00
110
630.00
122
680.00
112
1,165.00
3
70.00
45
379.00
48
379.00
55
489.00
30 (01/15/2011)
Acreage Attachments
Miscellaneous Attachments
Product
Model
S-1030
C-5
C-20
C-95
580c
Tractor 3-pt mounted Cat I w/ 7/8” pins
Item #
Description
3-pt mounted 30-inch rear scoop.
312000
Designed for standard tractors (20 –40 hp).
Holds 10 cubic feet of material
811050
3-pt mounted bolt together standard-duty
crane boom rated at 500 lbs with 70-inch
reach (horizontal) for lower lift pins
3-pt mounted pallet forks; rated at 2,000 lbs.
821000
Tubular forks 44” in length, spaced 30.5”
outside to outside. Cat I /II (7/8” pins)
Cat II quick hitch compatible.
3-pt mounted platform carrier frame. Lower
820200
supports are drilled for platform and are 37.5”
in length and spaced 24” apart.
Rated for 500 lbs
3-pt mounted mixer. Capacity 5-cu.ft.(1 bag)
780620
PTO driven. Cat 1 (7/8” pins) Includes single
acting hydraulic top link cylinder.
Not recommended for compact tractors with
short lift arms
Lbs.
List
178
515.00
159.00
119
379.00
68
199.00
215
1,129.00
Quick Hitches
These Quick Hitches attach to the tractors 3-pt, allowing the operator to easily hook on to any implement
meeting the category standard without leaving the seat.
QH-101
862840
Cat. I for tractors up to 50 hp. Supplied with
76
315.00
one set of adapter bushings
QH-102
862845 Cat. II for tractors up to 100 hp. Supplied with
134
440.00
one set of adapter bushings.
QH-107HD 862850
Cat. II HD for tractors up to 150 hp. Supplied
160
525.00
with one set of adapter bushings
QH-103
862855
Cat III for tractors up to 225 hp.
182
625.00
QH-106N
862860
Cat. III Narrow for tractors up to 225 hp.
176
625.00
862500
Cat I adapter bushing kit for use with QH-101
3
35.00
862530
Cat. II adapter bushing kit for use with
3
38.00
QH-102 & QH-107HD
31 (01/15/2011)
ATV / Garden Tractor Attachments
Landscaping Attachments
Product
Model
PLR-48
PLR-60
PLR-72
PBX-42
Pull-type attachments (Not design for road use).
Item #
Description
341940
Pull-type 4-ft landscape rake with clevis
hitch. For ATV or Garden tractors up to 22 hp
341945
341950
341960
Pull-type 42-inch box scraper with clevis
Lbs.
195
List
759.00
205
799.00
225
849.00
190
799.00
Note: Pull-type chassis allows either a landscape rake or box scraper to be mounted. If complete unit is
purchase from above, additional assembly can be added see below
341970
Pull type chassis only (Implement Bridge) for
84
420.00
PLR & PBX series
341888
4-ft Landscape rake tinebar assembly only
111
339.00
341889
121
379.00
341891
132
429.00
341955
42-inch box scraper assembly only
106
379.00
Flip-over Attachments
ATV & Garden Tractor attachments, Flip-over for easy transportation. (Not designed for road use).
940420
5-ft single gang flip-over disc with clevis
240
675.00
FOD-16
hitch. 16” dia. notched blades. Requires 18 hp
or 400 cc minimum. Built-in weight rack
FOC-48
940400
Flip over Culti-packer, 4-ft wide with 9 ½”
274
875.00
cast iron notched packer wheels.
FOH-5
940500
5-ft flip-over 5-bar spike tooth harrow.
205
995.00
Requires 18hp or 400 cc minimum
ATV Seeder / Spreader
Mounts to rack of ATV, 1-bushel capacity poly hopper
ATVK-400
403425
ATV Seeder / Spreader. 1-bushel capacity
poly hopper. Universal mount designed to fit
most brands and models of ATV’s. Mounts to
ATV rack. Can Ship UPS
42
32 (01/15/2011)
430.00
Interfacing Quick Attach Brackets
These Brackets are Designed to Interface with the below listed OEM Quick Attach Systems.
These brackets bolt to Worksaver Front Loader Attachments, or can be welded.
Note: Item No. is one pair of brackets
OEM Manufacturer
STANDARD PIN-ON
Brackets
WSP
Allied
Allied
Allied
Allied
Allied
ALO
AGCO Allis
AGCO Allis
AGCO Allis
AGCO Allis
AGCO Allis
AGCO Allis
Item #
830345
Description
Universal Pin-on Brackets. 1” diameter pins.
Skid Steer “Universal” Bracket
Weld-on Skid Steer Plate, a very economical
832540
method to convert existing attachments to
interface with “universal” quick attach system
Bolt-on “Universal” skid steer kit for
831110
Worksaver front loader attachments, will
interface with most skid steer mfg ‘95
Quick-attach brackets for interfacing with
831140
New Holland 500, 700 series and John Deere
500, 600 series Skid Steers
Allied Loaders
831600
Semi-Q.A. Brackets for Allied loaders Models
390, 394, 580, 584, 590, 594, 594HSL
831650
Interfacing Brackets for Allied loaders Models
395,495,595,695,795
831720
895, 995
For Models equipped with optional
831110
“universal” skid steer QA system Models 495,
595, 2495,2595
831730
2495, 2595, 2596, 2795, 2895 (S & SL)
ALO Loaders
Interfacing Brackets for ALO “Quickie”
830120
loaders Models Q310, Q340, Q610, Q620,
Q640, Q660, Q670, Q710, Q720, Q730,
Q740, Q750, Q755, Q760, Q770, Q790,
Q910, Q920, Q930, Q940, Q950, Q960,
Q970, Q980, Q990, Q1080
AGCO Allis
830490
Interfacing Brackets for AGCO Allis
Models 680, 682, 684, FL100
830476
Interfacing Brackets for AGCO Allis loaders
Models FL 300, 400, 500, 600 Euro-style
831790
Interfacing Brackets for ST 35A, ST 40A
831110
For Models equipped with ‘universal” skid
steer Q.A. system, Models SL46, SL48
830492
Interfacing Brackets for AGCO-Allis loader
Models 780, 780SL, 784, 784SL, 884SL
830120
Interfacing Bracket for FL-45
Lbs.
82
List
145.00
46
139.00
95
290.00
90
360.00
51
360.00
76
415.00
98
485.00
95
290.00
104
435.00
84
260.00
68
270.00
88
290.00
62
95
225.00
290.00
65
360.00
84
260.00
33 (01/15/2011)
OEM Manufacturer
Item #
Bobcat
831110
Branson
831110
Branson
831890
Bush Hog
830319
Bush Hog
831110
Bush Hog
831625
Bush Hog
831670
Bush Hog
831680
Bush Hog
831695
Bush Hog
831740
Case-IH
831110
Case-IH
831630
Description
Bobcat
For Models equipped with “universal” skid
steer QA system. Models 6TL, 7TL, 8TL, 9TL
and Versahandler V417
Branson Loaders
“universal” skid steer QA system
Models BL30, BL20A, BL205, BL40, BL255
Interfacing Brackets for BL10A, BL20A
Bush Hog Loaders
Adapter Bushing (1” to 1.25”) for use with
standard channel brackets when used with
Bush Hog loaders Models 2400QT, 2640QT,
3450QT with semi QA kit #24H42141
steer QA system Models 246, 346, 446, 546,
646, M300, 495, 595, 2595, 2595TSL, 3545,
2045, 4045, 5045, 6045
Interfacing Brackets for Bush Hog loaders
Models 3860QT
Models 2345
Models 2425, 2440, 2445
Models 2346, 2426, 2446, 2846, M346,
M446, M546
Models 3226, 3446
Case-IH
“universal” skid steer QA system Models
LX114, LX116, LX118, LX132, LX152,
C160, LX232, LX252, L-340, L-350, L360
Interfacing Brackets for Case-IH loaders
Models L300, 510, 520
Lbs.
List
95
290.00
95
290.00
290.00
2
17.00
per pair
95
290.00
55
260.00
66
360.00
70
240.00
74
445.00
78
480.00
95
290.00
55
240.00
34 (01/15/2011)
Case-IH
831645
Case-IH
830120
Case-IH
831625
Cat
831110
Century
Challenger
831110
831110
Challenger
831790
Challenger
830120
Cub Cadet / Yanmar
831110
Degalman
831110
Deutz -Fahr
Deutz - Fahr
830120
831110
DuAl (Woods)
831560
DuAl (Woods)
831655
DuAl (Woods)
831110
DuAl (Woods)
830120
Models 2250, 2350, 2450, 2255
Models 550, 555, 650, 655, 750, 850, L400,
L500, L600, L700, L750, L850, LX156,
LX162, LX172, LX720, LX730, LX740,
LX750, LX760, LX770, LX780
Models 56L
Caterpillar
steer QA system. Models 904B, 906H, TH255
Challenger
Model 50HL
For Models equipped w/ “universal” skid steer
QA system Model ML 30B, ML 40B
Interfacing Brackets for Models ML 30A and
ML 40A
Interfacing Brackets for Model ML 77, 97B
Cub Cadet
QA system Models 485, 642, CL-300, CL-400
Degalman
Fits Telehandler Model D1EC!
Deutz - Fahr
Interfacing Brackets for Model LFZ-760M
For Models equipped with ”universal” skid
steer QA system Models 1950, 2150
DuAl (Woods)
Interfacing Brackets for DuAl loader Models
equipped with Spee-D-Change, 110, 115, 200,
205, 210, 215, 255, 260, 275, 305, 310,
315,355, 360,
Interfacing Brackets for DuAl loader Models
equipped with Speed Couplers 320, 340, 345,
3100, 3150
QA system Models 1009, 1012, 1016, 1020,
1027, LC-96, LC-102, LC-108, LC-114, LU126, LU-132
Interfacing Brackets for DuAl loaders.
Models LF-138, LF-156
64
310.00
84
260.00
55
260.00
95
290.00
95
95
290.00
290.00
62
225.00
84
260.00
95
290.00
95
290.00
84
95
260.00
290.00
225.00
55
280.00
69
290.00
95
84
35 (01/15/2011)
260.00
Farmhand (AGCO)
830377
Farmhand (AGCO)
830370
Farmhand (AGCO)
830240
Farmtrac
831110
Fendt
830476
Frey Loaders
830120
Frey Loaders
831110
New Holland (Ford)
830330
New Holland (Ford)
831605
New Holland (Ford)
831590
New Holland (Ford)
831110
New Holland (Ford)
831720
Models 82LB / 84LB
Farmhand (AGCO)
Interfacing Brackets for Farmhand loaders
(Semi-Q.A.) Models 740, XL740
Models 940, XL740, XL940, XL1140,
SL1140, XL1340, SL1340
Models XL945, SL945
QA system Models 5140M, 5040M, 5020M,
5045, 5245, 5340, 5345, 5440, 5445, 5545
Fendt (AGCO)
Interfacing Brackets for Fendt loaders
Models 450, 750HSL (Euro-style)
Frey Loaders
Interfacing Brackets for Models
ML180, ML200, ML280, ML360, ML460,
ML500, ML560, ML750
For models equipped with optional “Universal
skid steer QA system. Models ML-180,
ML-200, ML-280.
New Holland (Ford)
Pin-Type Mounting Brackets for NH loaders
Models 7109, 7209, 7210, 7309, 7310, 7410
Interfacing Brackets for NH loaders
Models 7210, 7309, 7310, 7410HD
Interfacing Brackets for NH loaders Models
7312, 7314, 7411, 7412, 7412HD, 7413,
7511, 72 LA
14LA, 16LA, 17LA, 18LA, 32LA, 33LA,
46LB, 52LA, 52LB, 52LC, 56LB, 270TL,
620TL, 210TL, 240TL, 250TL, 260TL.
810TL, 820TL
Interfacing Brackets for NH loaders
Models TV-140, TV-145
Note: not compatible with RBSF-449 / 432
78
240.00
80
260.00
86
330.00
95
290.00
88
290.00
84
260.00
95.00
290.00
83
415.00
95
340.00
86
290.00
95
290.00
98
490.00
36 (01/15/2011)
New Holland (Ford)
831120
Ford / Versatile / NH
830250
Great Bend
831705
Great Bend
831625
Great Bend
831685
Great Bend
831110
Gehl
831110
John Deere
830355
John Deere
831575
John Deere
831535
John Deere
831540
John Deere
831795
John Deere
831860
John Deere
830120
John Deere
John Deere
831880
831110
New Holland (Ford)
Interfacing Brackets for NH loaders Models
56LB, 62LB, 72LB, 810TL, 820TL, 830TL,
840TL, 850TL, 860TL, 870TL
Interfacing Brackets for Versatile / Ford New
Holland Bi-Directional with loader Models
256, 276, 9030
Great Bend
Interfacing Brackets for GB loader 990
Interfacing Brackets for GB loaders Models
330, 360, 440, 660, 760, 770, 860, 870, 880,
3424, 2140, 2144, 2157, 2166, M110
Interfacing Brackets for GB loader 332
“universal” skid steer QA systems, Models
224, 240, 244, 260, 280, 284, 332, 334, 440,
540, 626, 2125, 2130, 2133, 2136, 2140,
2144, 2166
Gehl
Interfacing Brackets for Model 340
Articulated Loader
John Deere
Pin Type (3/4” pins) Mounting Brackets for
JD loaders Models 60, 70
Pin Type Mounting Brackets for JD loaders
Models 620, 640, 720, 725, 740
Interfacing Brackets for JD loaders
Models 240, 245, 260, 265
Interfacing Brackets for JD loader 280
Interfacing brkts. for JD loader Models 300,
305, 300CX, 400X, 400CX, 410, 420, 430,
440, 460, 512, 520, 521, 540, 541, 542, 553
Interfacing Brackets for JD loaders Models
620, 640, 720, 721, 725, 726, 740, 741, 746
Interfacing brkts. for JD loaders equipped with
Global Carrier system Models 563, 673, 553
Interfacing Brackets for JD loader 840
“universal” skid steer QA system
84
290.00
120
625.00
72
320.00
55
260.00
74
445.00
95
290.00
95
290.00
81
225.00
98
370.00
98
330.00
88
360.00
55
330.00
110
460.00
84
260.00
122
95
425.00
290.00
37 (01/15/2011)
OEM Manufacturer
Item #
Kioti
831110
Koyker
831685
Koyker
831110
Kubota
831110
Kubota
831625
Kubota
831665
Kubota
831780
Kubota
831660
Kubota
831785
LS
831110
Mahindra
831110
Description
Kioti
1590, 1595, 1730, 1731, KL-130, KL351,
KL401, KL402, KL451, KL551,
KL901, KL1730S
Koyker
Interfacing Brackets for Koyker loaders
Models 210, 245, 300, 310, 345, 400, 500,
550, 565, 600, 645,
120/125, 140, 145, 155, 160, 180/190,
185/195, 220, 235, 245, 310, 345, 385, C-200
Kubota
“universal” skid steer QA system. Models
L39, L48, LA513, LA703, LA723, LA724
LA823, LA844, LA853, LA1153, LA1162,
LA1301S, LA1353, LA1403, LA1601S,
LA1953, TL1000, TL1150, TL1709, R520S
Interfacing Brackets for Kubota loaders
Models M1000, M1250, M1275, M1410
equipped w/ quick coupler
Models LA1001, LA1002
Models LA1251, LA1301, LA1601
Interfacing Brackets for LA 1001, LA 1002
with 1/3/16"
Interfacing Brackets for Kubota loader LA852
LS
For Models equipped “universal” skid steer
QA system. Models TL-3010, TL-4010,
LSL-1280, LL3100, LL3500, LL3101,
LL4100. LL5100, LL5101, LL7100
Mahindra
QA system Models ML108, ML108H,
ML111, ML112, ML114, ML120, ML130,
ML170, ML232, ML245, ML250, ML252
ML260, ML262, ML264, ML265, ML266,
ML270, ML272, ML275, ML282
Lbs.
List
95
290.00
71
445.00
95
290.00
95
290.00
55
260.00
55
310.00
60
300.00
62
310.00
95
290.00
95
290.00
38 (01/15/2011)
OEM Manufacturer
Item #
Massey Ferguson
830490
Massey Ferguson
830476
Massey Ferguson
830492
Massey Ferguson
831790
Massey-Ferguson
831110
Massey-Ferguson
831800
Massey-Ferguson
830120
Mc Cormick
830120
MDS
830255
Montana
831110
Rhino (Alamo, SMC)
830330
Rhino (Alamo, SMC)
831605
Rhino (Alamo, SMC)
831605
Rhino (Alamo, SMC)
831590
Rhino (Alamo, SMC)
831110
Description
Massey Ferguson
Interfacing Brackets for MF loader Models
232, 236, 832, 932, 1032, 838, 838SL
Interfacing Brackets (Euro-style) for MF
loader Models 1040, 1050, 1060, 1070,
1080, 1090, 1055
Interfacing Brackets for MF loader Models
238, 246, 848, 938, 948, 1036, 1038, 1038SL,
1048, 1048SL
Interfacing Brackets for MF Model 1530,
DL-120
QA system Models 1525, 1530, 1532, L200,
L210, DL250
Interfacing brkts. for MF loader model 1525
Interfacing Brackets for MF loaders equipped
with Euro tool carrier, Models 920, 925, 930.
935, 940, 945, 950, 955, 960, 965
Mc Cormick
Interfacing Brks. for L Series Models L720,
L118, L130, L135, L140, L145, L150, L155,
L160, L165, L175, L720, L1080 (ALO)
MDS Shurlock
Interfacing Brackets for Shurlock system
Montana
QA system Models 100R, 115, 5145, 5440
Rhino (Alamo, SMC)
Pin Type (1-1/4”) Mounting Brackets for
SMC loaders Models Q-series 2410, 2491
Interfacing Brackets for SMC loaders Models
2410, 2491, 102QX, 104QX
Interfacing Brackets for SMC loaders Models
2410, 2491, 102QX, 104QX
Interfacing Brackets for SMC loader models
114Q,124Q,124QX,134Q, 2411, 2412, 2414A
SMC 2408, 2409, 2410, 2491, 102QX,
104QX, 4211SS, 4211SS-MSL
Lbs.
List
68
270.00
88
290.00
65
340.00
225.00
95
290.00
90
350.00
84
260.00
84
260.00
70
310.00
290.00
83
415.00
95
340.00
95
340.00
86
290.00
95
290.00
39 (01/15/2011)
OEM Manufacturer
Item #
Stoll
830120
Stoll
831110
Swinger
831110
TYM
TYM
830476
831110
Valtra
830120
Westendorf
831550
Westendorf
831710
Westendorf
831110
White (AGCO)
White (AGCO)
White (AGCO)
White (AGCO)
831605
831590
830330
830490
White (AGCO)
830492
Description
Stoll
Interfacing Brackets for Stoll loaders Models
F4, F8, F15, F10, F30, F31, F35, F36, F50,
F51, F-60, F71, F-80
QA system Models F-4, F-8 Classic, FC-350P,
FC-450H/P
Swinger (articulated loader)
For Articulated Loaders with “universal” Skid
Steer Quick Attach. Model 200IND, 2K, 3K.
TYM
Interfacing Brackets for Model TL-300
Interfacing brackets for models LT-200,
LT-300, LT-353, LT-400, LT-450, LT-451,
LT-500, LT-600, LT-700, LT-900
Valtra
Interfacing Brkts. for Models 720, 740, 750,
760, 770, 920, 930, 940, 950, 960, 970, 980
Lbs.
List
84
260.00
95
290.00
95
290.00
88
95
290.00
290.00
84
260.00
74
300.00
98
360.00
Westendorf
Interfacing Brkts. for Westendorf loaders
Models 530, 540, 550, 560, 570, CC-330, CC340, CC360, CC-370, TA-25, TA26, TA27,
TA28, TA29, TA45, TA46, TA48, TA76,
TA77, TA340, XTA400, XTA-700, WL21,
WL27, WL42, WL44, WL46, WL49,WL64
Interfacing Brackets for Westendorf loaders
Models TA140, TA-111,
TA-160, TA170, TA180
Interfacing Brackets for Westendorf loaders
Models TA-175, TA-185, and other TA series
loaders with skid steer “Universal” QA system
White (AGCO)
Interfacing Brackets for Model 175QA
Interfacing Brackets for White loader
Models 656,658
Interfacing Brackets for White loader Models
676, 676SL, 678, 678SL, 688, 688SL, 686,
686SL
290.00
95
86
83
68
340.00
290.00
415.00
270.00
65
340.00
40 (01/15/2011)
OEM Manufacturer
Woods
Item #
831110
Woods
831655
Wrangler
831110
Zetor
830120
Description
For Models equipped w/ optional “universal”
skid steer QA system Models 1009, 1012,
1016, 1020, 1027
Interfacing brackets for Woods loaders
equipped w/speed couplers.
Models 340,345,3100,3150
Wrangler
For Articulated Loaders with “universal”
Skid Steer Quick Attach
Zetor
Interfacing Brackets for Zetor loaders (SemiQ.A.) Models 92, 101, 102H, 102SLX, 103H,
103SLX, 112SLX, 202, 202SL
Optional Pin-on Brackets
Pin-Type (3/4” pins) Brackets for loaders
requiring additional roll back
830335
Pin-Type (1” pins) Brackets for loaders
requiring additional roll back
830330
Pin-Type (1-1/4”) additional roll back
Optional Lift Pin Bushing Set (set of 4 bushings)
830322
1-1/8” Lift Pins for Std. Channel Brackets
(Channel must be drilled)
830323
Bushing set to convert from 1” to 1/3/16”
830324
Bushing set to convert from 1” to 1-1/4”
830328
Bushing set to convert from 1” to 1-1/2”
830345
Universal Pin-on Brackets. For Pin-type
loaders with 1 inch pins
830495
STANDARD PIN-ON
Brackets
Lbs.
95
List
290.00
69
280.00
95
290.00
84
260.00
81
435.00
81
360.00
83
415.00
9
85.00
2
2
2
82
55.00
55.00
55.00
145.00
46
139.00
110
625.00
Conversion Brackets
WSP
832540
Weld-on Plate simply welds to existing attachment to
convert to “universal” quick-attach mounting interface.
CNC cut and formed from ¼” hot rolled plate with
solid ½” x 1-1/2” top bar.
Euro to Skid Steer
832550
Interfaces with loader that use the Euro /
Global attaching system to allow the use of
skid steer type attachments
Interfaces with JD 400/500 series quick attach
loaders to allow the use of skid steer type
attachments.
JD 400/500 to Skid Steer
41 (01/15/2011)
550.00
Miscellaneous Items
Miscellaneous
Product
Model
TLC-3110
Item
Description
No.
Post Hole Diggers / Augers Repair Items
175010
(2) Red Claw cutting teeth w/bolts fits 9”30” dia. augers & 6” augers mfg. after 6/00
175040
Metric Series I U-joint repair kit fits models
300, 490, 500 Post Hole Diggers built with
push-pin on tractor end of PTO assembly
175080
Metric Series II U-joint repair kit fits
Models 300, 500 built with slide collar on
tractor end of PTO assembly mfg after 7/01
175050
Blister package of (5) grade 2 shear bolts,
nuts and washers for Models 300, 500
diggers
Industrial Duty Auger Items
706301
Carbide Bullet Tooth
706201
35 Flat Tooth
706202
35 HF Hard Faced Flat Tooth
706203
5T30 Spike Tooth
706204
5T30 HF Hard Face Flat Tooth
706206
SB45 (4.5) Fish Tail Point for 4.5” auger
706205
SB34 (3.5) Fish Tail Point for all augers
expect 4.5”
706302
Bullet Tooth Puller
706303
Soft Tooth Hammer
Misc. Forks
830550
55’ Tubular Forks for ULF series
Pair of 48” Replacement Forks (Rod Style)
831853
rated 4,000 lbs for ULF-348, SSPF-4048
will fit ULF-346, SSPF-40. Sold in pairs
831369
Pair of 42” Replacement Forks (Rail
Mount) rated 4,000 lbs for SSPF-3742,
SSPF-442, JDPF-442
831379
Pair of 48” Replacement Forks (Rail
Mount) rated 4,000 lbs for SSPF-3748,
SSPF-448, JDPF-5448
832475
Pair of 48” Replacement Forks rated at
5,000 lbs. for GLPF-5448
832480
Pair of 46” Replacement Forks rated at
2,000 lbs. for ULF-2046
Miscellaneous Items
831619
Top Link Hydraulic Cylinder Cat. II
3” x 10” (21-1/4” ctr / ctr closed)
Lbs.
List
1.35
24.80
.55
33.69
.55
33.69
1.40
5.47
11.95
5.65
7.55
5.45
10.75
55.00
55.00
67.00
54.00
120
425.00
253
498.00
175
489.00
196
550.00
42 (01/15/2011)
529.00
489.00
26
299.00
Conversion Hitch Kits
2-pt to 3-pt Conversion Kits
Specify Tractor Model When Ordering. All 2-pt to 3-pt conversion hitch kits can ship UPS. Please allow
three (3) weeks lead-time when ordering. Note: 26” = Cat I Spacing, 32” = Cat II Spacing
Product
Model
Item
Description
Lbs.
List
No.
26” spacing. For IHC/Farmall Models 300,
330, 340, 350, 450, 460, & 560, with exposed
HK-126
864126
round rockershaft.
68
289.00
(Note: Check Model, utility models require a
different toplink bracket refer to HK-826,
HK-1126, HK-1132)
32” spacing. For IHC/Farmall Models 300,
330, 340, 350, 450, 460, & 560, with exposed
HK-132
864132
round rockershaft.
70
319.00
(Note: Check Model, utility models require a
different toplink bracket refer to HK-826,
HK-1126, HK-1132)
HK-1126
864127
26” Spacing For IHC/Farmall
68
339.00
460 & 560 Utility Models
HK-1132
864133
32” Spacing For IHC/Farmall
70
349.00
460 & 560 Utility Models
HK226
864226 26” Spacing. For INC/Farmall 240 (3” prongs)
67
359.00
Note: top link bracket replaces casting at top
of tractor or belt pulley housing. (Check
tractor – 240 was built two ways, see HK-526)
HK326
864326
26” Spacing. For IHC/Farmall C, Super C,
67
369.00
200, 230 (2-1/2” prongs)
HK-426
864426
26” Spacing. For IHC/Farmall 544 & 656
72
405.00
HK-432
864432
32” Spacing. For IHC/Farmall 544 & 656
77
359.00
HK-526
864526 26” Spacing. For IHC/Farmall 240 (3” prongs)
67
319.00
Note: For models with 3-holes on rear housing
to mount 5”x5.5” flat plate top link bracket.
Note: Check tractor – 240 was built two ways,
see HK-226
HK-626
864626
26” Spacing. For IHC/Farmall 706, 756, 806,
72
329.00
826 & 856
HK-632
864632
32” Spacing. For IHC/Farmall 706, 756, 806,
77
339.00
826 & 856
HK-726
864726
26” Spacing. For IHC/Farmall 606
70
319.00
HK-732
864732
32” Spacing. For IHC/Farmall 606
72
329.00
43 (01/15/2011)
2-pt to 3-pt Conversion Kits
Specify Tractor Model When Ordering. All 2-pt to 3-pt conversion hitch kits can ship UPS. Please allow
Product
Model
Item
Description
Lbs.
List
No.
HK-826
864826
26” Spacing. For IHC/Farmall 404, 504 also
69
319.00
300, 330, 340, 350 & 574 Utility models.
Note: No exposed rockshaft, tractor has 3
threaded holes on rear housing.
HK-1026
864134
26” Spacing. For IHC/Farmall 400 row crop
72
399.00
HK-1032
864135
32” Spacing. For IHC/Farmall 400 row crop
74
409.00
HK-3026
864336
26” Spacing. For IHC/Farmall 300 row crop.
72
359.00
Note: with no exposed rockershaft and no
holes in rear of differential.
HK-926
864926
26” Spacing. Pair of lower 3-inch prong
44
199.00
assemblies only.
HK-932
864932
32” Spacing. Pair of lower 3-inch prong
50
209.00
assemblies only.
44 (01/15/2011)
3-pt Conversion Kits
Specify Tractor Model When Ordering. Selected 3-pt conversion hitch kits can ship UPS. Please allow
Product
Model
Item
Description
Lbs.
List
No.
International Harvester / Farmall
HK-90
862300 Hitch Kit for IHC/FARMALL Standard Cub –
122
679.00
Cat. 0/I uses existing hydraulic lift of tractor
Will ship UPS in 3 pkg. Note:
Not for use on L-Boy or Cadet Lawnmower
HK-91
862360
Hitch for IHC/FARMALL Cub Lo-Boy Cat.
124
689.00
0/I uses existing hydraulic lift of tractor.
Will ship UPS in 3 pkg. Note: Not for Models
154, 184, 185 or Cadet Cub Lawnmowers
HK-95
862330
Hitch Kit for IHC/FARMALL Super A, 100,
80
459.00
130, 140 with std. Pull-type drawbar.
Uses existing hydraulic lift of tractor.
Will ship UPS in 2 pkg.
HK-96
862331
Hitch Kit for IHC/FARMALL 100, 130, 140
65
399.00
with IH 1-pt fast hitch. Cat. I
Uses existing hydraulic lift of tractor.
Will ship UPS
HK-102
865102 Hitch Kit for IHC C, Super C, 200, 230 Cat. I
190
949.00
Uses existing hydraulic lift of tractor
John Deere
HK-201
861200
Hitch Kit for JD M & MT fixed 26” spacing.
68
349.00
Cat. I Will ship UPS
HK-202
865202
Hitch Kit for JD 520, 530, 620,630 Cat. I/II
134
749.00
Will ship UPS in 3 pkg
HK-203
865300
Hitch Kit for JD A, B, G, 50, 60, 70 Cat. I/II
176
879.00
Will ship UPS in 4 pkg. Note: If tractor serial
number is below the following, a later model
drawbar support bracket must be installed.
For Model A-A561903, Model B – B186134
Model G – G187000. Order bracket from JD
dealer for “A” order AA-3843, “B” order AB3507R, “G” order AF-904R
45 (01/15/2011)
3-pt Conversion Kits
Specify Tractor Model When Ordering. Selected 3-pt conversion hitch kits can ship UPS. Please allow
Product
Mode l
Item
Description
Lbs.
List
No.
Allis Chalmers
HK-305
865305
Hitch Kit for Allis Chalmers WD & WD-45
175
739.00
Cat. I/II uses original swinging drawbar.
Will ship UPS in 3-pkg
HK-306
865306
Hitch Kit for Allis Chalmers D14 & D15
175
929.00
Cat. I/II uses original swinging drawbar
HK-307
865307
Hitch Kit for Allis Chalmers CA Cat. I uses
120
869.00
original swinging drawbar
HK-308
862800
Hitch Kit for Allis Chalmers B, C Cat. I
110
669.00
Note: Tractor must be equipped with
hydraulic pump & standard drawbar.
Kit does include hydraulic cylinder and hose.
Will ship UPS in 2 pkg
HK-315
865315
Hitch Kit for Allis Chalmers D17 Series I-III
205
949.00
HK-317
865317
Hitch Kit for Allis Chalmers D17 Series IV
175
899.00
International Harvester
HK-1106
865000
Hitch Kit for IHC H, M, MTA, MD, 300,
237
919.00
340,350,400,460, 504 & Super H, M & MTA
Cat. I/II requires purchase of one 3” x 8” Cyl.
HK-11062
865100 Hitch Kit for IHC M, MTA, Super M & MTA,
260
999.00
MD, 400,450,460,504,560 and (544 / 656 with
spacer #861188) Cat. I/II requires purchase of
two 3” x 8” Cyl.
861190
Optional bracket to allow use of swinging
80
199.00
drawbar with HK-1106 & HK-11062
861188
Spacer kit for IHC 544 / 656 to allow use of
38
199.00
HK-11062
Oliver
HK-1678
865010
Hitch Kit for Oliver Models 66,77,88,
242
1,199.00
Super 66 & 77, 600, 770 Cat. I/II uses original
swinging drawbar.
Requires purchase one 3” X 8” cyl.
HK-16782
865200
Hitch Kit for Oliver Models 77, 88
265
1,299.00
Super 77 & 88, 660,770,880 Cat. I/II uses
original swinging drawbar.
Requires purchase two 3” X 8” cyl.
46 (01/15/2011)
“FIT-ALL” ROLLER CONDITIONERS
The roller conditioner should extend beyond the outer shank
centers by approximately 18 inches. If the outer shanks are
placed close to the frame ends, then the next longer roller
conditioner should be used.
Roller Package
(less Mounting Bracket Kit – see below)
Item #
Roller/Conditioner
803880
803900
803910
803925
803930
803940
6
8
10
12½
15
17½
Weight
List
523
608
702
812
928
1,043
$ 2,320
2,530
2,950
3,165
3,585
4,010
ft.
ft.
ft.
ft.
ft.
ft.
Mounting Bracket Kits
Item #
Rear Tube Frame Size
Weight
List
803946
4” x 4” (doubled 21” apart)
158 $ 500.00
803948
4” x 6” Horizontal
106
520.00
803950
4” x 6” Vertical
92
480.00
803952
108
540.00
803955
110
500.00
803960
5” x 5” Square
94
500.00
803965
108
520.00
803970
5” x 7” Vertical
94
520.00
803975
6” x 6” Square
94
510.00
803980
7” x 7” Square
110
500.00
803985
803990
For Deere V-Ripper
For Case / NH V-Ripper
110
118
500.00
520.00
47 (01/15/2011)
Implements Designed For Your Lifestyle
∗ Bale Spears for Loaders ∗ Rear Blades
∗ 3-pt Bale Spears
∗ Rotary Mowers
∗ Box Scrapers
3-pt & Pull Type Models
∗ Compact Grapples
∗ Flip-Over Disk
∗ Grapple Rakes
∗ Skid Steer Attachments
∗ Tree Clipper
∗ Landscape Rakes
3-pt & Pull Type Models
∗ Mixers
∗ Post Hole Diggers
∗ Post Drivers (Hydraulic)
∗ Snow Blades
∗ Rotary Brooms
∗
∗
∗
∗
Seeders/Spreaders
Quick Hitches
Hitch Kits
Tillage
Middle Buster
Rippers
Subsoiler
∗ 3-Point Accessories
Boom Pallet Fork
Scoop
Carry-All
∗ Pallet Fork Attachments
∗ ETG-Series Grapples
∗ Rear Hitch Kits
∗ Roller Conditioners

WS Price January 2011

Transcription

Similar documents

September 12 , 2011 - Kasco Manufacturing

2014 Wholegoods price book.indd

Laparoscopic - Symmetry Surgical