7.4 Mb - FibroLAN

Converters
Fibrolan’s comprehensive line of media converters interconnect one type of media to another-typically copper to
fiber (MM, SM and SFS).
Available in stand-alone, fixed multi-channel and modular chassis, these media devices allow media conversion for
a wide range of protocols and speeds: Ethernet, Fast Ethernet, Gigabit Ethernet, Fibre Channel, 10/100, 1000, ATM,
E1/T1, RS232, RS485, and Fault Tolerant applications.
Most of the devices are available in SNMP managed version.
All products are equipped with high reliability internal wide range (100-240VAC) Power Supplies, for most products
12-24-48VDC variants are available as well. This, as well as robust metal housing and extended temperature range
option (up to -25º to +70ºC) make the devices suitable for a variety of vertical markets: Enterprise, Industrial,
Utilities, Defense, Education, Transportation and more.
With advanced features such as Auto-Negotiation, Auto-Cross, Far –End Fault, Fault Propagation, LST
(Link Segmentation Test), SLE ( Subscriber Link Emulation), Loop-Back, QoS, Statistics, and more, have made
Fibrolan media converters the number one choice in the industry.
Media Conversion technology solutions provide the ability to:
• add new devices- converters- without replacing costly cabling
• Extend network distances ( up to 150Km )
• Provide a link between media types – transparent to the infrastructure
• Provide Resiliency where needed
• Keep track with changing technology
Refer to section 4 for a complete SFP Transceivers List.
For more stringent requirements (hi density, advanced manageability etc) you may find the optimal solution also in
parts I and II of this guide. Although products listed in these parts are primarily addressing carriers, they are suitable
also for complex enterprise networks.
www.fibrolan.com
VI-1
Stand-Alone Devices
Fast Ethernet MC
•S.CON1/SCON1M
•H.CON
•F.CON1
•U.CON1
•F.CON12
•LTA41/31M
•DLA22/M
•ATARA100M
Gigabit Ethernet MC
•ATARA1000M
•GSM1000/GSM1000M
•GSM1010/GSM1010M
Low bit rate MC
•FC32
•FC42
Universal Extender
•U.CON2500
•U.CON4000
E1/T1 MC
•FEM/FEM4
•FTM/FTM4
VI-A1
FC32 Fiber Optic Line Converters
Fibrolan FC32 ias a stand-alone device allowing duplex transmission of RS232 signals over a fiber line at distances
of up to 2 Km using multimode fiber cable and up to 100Km with single mode fiber cables.
Transparent High-speed data multiplexing
Fiber Port: 1310nm, SC connectors
Distance: 2Km over MM fiber, up to 100Km SM fiber
Copper Port:
TIA/EIA-574 Standard Compliance
DB-9 Male Connector
Maximum baud rate: 256000 bauds automatic adjusting
Supports full 8 data and handshake lines
Diagnostic LEDs
DTE/DCE selection through DIP switch S3
Optional DC Power Supplies (12/24/48VDC)
Optional Extended Temperature Range
(-10º ÷ +70ºC) or (-25º ÷ +70ºC)
VI-2
• Supports full set of 8 RS232 signals
• Extends distance between devices up to 100km
• Extensive diagnostics for easy maintenance
• Plug and play operation
• Baud rates up to 256Kbauds
• DC powered and Industrial temperature range options
• 4W power consumption.
• FC32 devices must be deployed in pairs.
www.fibrolan.com
Typical Topology
A typical installation uses a set of two FC32 units connected to each other by a fiber cable
while their copper ports are connected to the serial ports of the user’s devices
Fibrolan’s FC32 line extender supports the full set of 8 RS232 signals
(TxD, RxD, RTS, CTS, DTR, DSR, DCD, Ri) as well as any subset of it.
The device utilizes a unique design that is transparent to the protocol details such as number
of stop bits or baud rate.
FC32 devices must be deployed in pairs.
VI-3
FC42 Fiber Optic Line Converters
Fibrolan’s FC42 is a stand alone device allowing the transmission of RS485 or RS422 signals over a fiber line at
distances of up to 3 km using multimode fiber cable and up to 150 km with single mode fiber cables.
Transparent High-speed data multiplexing
• Supports both RS-422 and RS-485
Fiber Port: 1310nm, SC connectors
Distance: 2Km over MM fiber, up to 100Km SM fiber
• Extends distance between devices up to 100km
Copper Port:
• Extensive diagnostics for easy maintenance
ANSI/TIA/EIA-485-A Standard Compliance
DB-9 Male Connector
• Plug and play operation
Maximum baud rate: 256000 bauds automatic adjusting
4 wire operation and P2P Topology only
• Baud rates up to 256Kbauds
2 wire operato and bus connection are not supported
• DC powered and Industrial temperature range options
Diagnostic LEDs
Optional DC Power Supplies (12/24/48VDC)
• 4W power consumption.
Optional Extended Temperature Range
• FC42 devices must be deployed in pairs.
(-10º ÷ +70ºC) or (-25º ÷ +70ºC)
VI-4
www.fibrolan.com
Typical Topology
A typical installation uses a set of two FC42 units connected to each other by a fiber cable
while their copper ports are connected to the serial ports of the user’s devices as illustrated
in the below drawing.
Fibrolan’s FC42 line extender supports RS485 4 wire full duplex operation and P2P only.
The device utilizes a unique design that is transparent to the types of data being transmitted
thus supporting NRZ and NRZI protocols.
VI-5
10/100 TX/FX Media Converter–S.CON series
SCON1- S.CON1M
• Single channel converter, 10/100BaseTX to
100BaseFX, L2 operation
• SNMP managed (S.CON1M), unmanaged (S.CON1)
• Frame size up to 1916 bytes (SCON1) 1536
bytes (S.CON1M)
• Auto-Negotiation is deployed on TP port to determine link options and optimal settings
• MDI-II/MDI-X frontal switch allows easy Installation and maintenance
• FEF: (Far End Fault) for F/O port Link integrity test
• SFS: (Single Fiber Strand) models for fiber
saving (20/80Km)
• Fault Propagation: for additional resiliency
• Flow Control: for optimal performance
• ETR: Optional Extended Temperature Range
for industrial environment
VI-6
• Front Panel DIP switches: TP and F/O port setup
Flexibility: desk-top, shelf or wall mount Installations
• Reliability: internal quality power-supply
(AC or optional DC P.S.)
• SNMP managed device (S.CONIM)
• Unmanaged device (S.CON1)
• Enterprise Applications
• The device is suitable for small/medium
enterprise solutions at low cost installations.
• Top Performance: maximum distances
(2KmMM, 150km SM, 100m TP port) in any
network architecture
www.fibrolan.com
Managed FO cost – effective SMB solution
Headquarters
Switch
100Base-TX
MetroView
100Base-TX
Main Servers
F.CON12M
100Base-FX FDX
Department A
S.CON1M
Department B
S.CON1M
Department C
S.CON1M
Department M
S.CON1M
100Base-TX
10Mb
Switch
Switch
Switch
Switch
VI-7
10/100TX-FX Media Converter/Access Device
10/100 TX-FX H.CON series
• Single channel converter, 10/100BaseTX to 100BaseFX, L2 operation
• Frame size up to 1536 bytes
• 1K Mac addresses
• Auto-Negotiation is deployed on TP port to determine link options and optimal settings
• FEF: (Far End Fault) for F/O port Link
integrity test
• The device supports 1K MAC addresses
• Flow Control for optimal performance
• The device does not require any setup and does not have any external control
• The F/O port operates at maximum
performance: 100Mbps Full Duplex
• ETR: Optional Extended Temperature Range for industrial environment (-10º ÷ +70ºC)
• Reliability: internal quality power-supply
(AC or optional DC P.S.)
• Flexibility: desk-top, shelf or wall mount
installations
VI-8
• FTTX Applications
The device provides a low cost, effective
solution for unmanaged CPE applications in FTTx environments
• Enterprise applications
• Top Performance: maximum distances 2Km
MM, 150km SM, Single Fiber 20/40/80Km, 100m copper port in any network architecture
www.fibrolan.com
Low cost subscribers connectivity solution
INTERNET
Service Provider
Metro Ethernet
Network
GE
Switch / Router
GE Links
100Base-TX
MetroStar System
Management
Up to 24*100Mb Links
F/O Links
Subscriber A
H.CON
10/100Mbps
100Base-FX FDX
Subscriber B
H.CON
10/100Mbps
Subscriber M
H.CON
10/100Mbps
VI-9
100BaseTX to 100BaseFX –F-CON series
• Single channel converter, 100BaseTX to
100BaseFX, L1 operation
• Transparent to frame size and higher layer protocols
• Frame size up to 10k bytes
• Auto-Negotiation is deployed on TP port to determine link options and optimal settings
Auto-Cross support
• FEF: (Far End Fault) for F/O port Link integrity test
• Bi-directional Fault Propagation mechanism
• DIP switches for basic configuration
• The F/O port operates at maximum performance: 100Mbps Full Duplex
• Reliability: internal quality power-supply
(AC or optional DC P.S. for Telco operations)
• Flexibility: desk-top, shelf or wall mount installation
• ETR: Optional Extended Temperature Range
for industrial environment
VI-10
•Enterprise applications
The device provides a low cost, effective
solution for unmanaged Small/Medium
Business (SMB) applications
•Top Performance: maximum distances 2Km MM, 150km SM, Single Fiber, 100m
copper port in any network architecture
www.fibrolan.com
Low cost unmanaged SME topology
Headquarters
Switch 10/100
100Base-TX
100Base-TX
Main Servers
F.CON12M
100Base-FX FDX
Building A
F.CON1
Building B
F.CON1
Building D
F.CON1
Building P
F.CON1
100Base-TX
10Mb
Switch
Switch
Switch
Switch
VI-11
Universal Fiber to Fiber Converters
U.CON2500 and U.CON4000 Series
• The U.CON2500 data rate is from 100Mbps
to 2.5Gbps and efficiently support Fast Ethernet
GE, OC3,0C12,0C48,STM1, STM4 and STM16
• The U.CON2500 operates with SFP transceivers including CWDM/DWDM
• The U.CON4000 device is protocol independent for the specified transmission speed and efficiently supports Fast
Ethernet, OC3/STM1, Gigabit Ethernet, 1/2/4G FC, FICON,
OC12/STM4, OC48/STM16, 4.0Gbps and WDM.
Data Rate:100Mbps to 4Gbps
• Refer to section 4 for a complete list of SFPs transceivers
• Frame size up to 10k bytes
• Reliability: internal quality power-supply
(AC or optional DC P.S.)
• Flexibility: desk-top, shelf or wall mount installations
• ETR: Optional Extended Temperature Range for industrial environment
VI-12
Universal Applications
The U.CON family products provide the Network designer with a
flexible and cost effective device for optical signals conversion
and network extension
These devices are plug-play universal protocol transparent
devices
Devices deployment is easy and do not require any settings or
measurements
The devices provide a low cost, effective solution covering a wide
range of protocols and applications
Top Performance:
Network extension up to 80Km (120Km for GbE)
CWDM 1GE: 40/80/100/120kM
DWDM 1GE: 80/100/120Km
CWDM 4 Gbps 40/80Km
DWDM 4 Gbps ITU Grid Channel 80Km
www.fibrolan.com
SONET/SDH topology
Site A
U.CON4000
SDH
FE/GE,FC1/2/4
STM1/4/16
OC3/12/48
CWDM/DWDM
Site B
MetroStar System
U.CON4000
Management
FE/GE,FC1/2/4
STM1/4/16
OC3/12/48
CWDM/DWDM
SAN
SNMP
Manager
FO Links
4Gb/s
FO Links
4Gb/s
MSM4000U
Modules
Fiber
Channel
Switch
VI-13
100Base-TX to 100Base-FX Multiple Channel
Converters
F.CON12/F.CON12M
•Multiple channel converter, 100BaseTX to 100BaseFX, L1 operation, providing 6 or 12
independent channels housed in a slim 1u chassis
•Frame size up to 10k bytes
•SNMP Ready: field upgrade to fully managed device (embedded management interface)
•SNMP agent module: FNM1612/FNM1613
•FDX/HDX for each channel selection
(Copper and FO port) via DIP switches
•Bi-directional Fault Propagation mechanism
•Link Test capability (for 6 channels)
•DIP switches setup for basic configuration
•Redundant Power Supply (AC or DC)
•Hot-Swapping Power Supply
•Reliability: internal quality power-supply
(AC or optional DC P.S.)
• Flexibility: desk-top, shelf or wall mount installations
VI-14
Enterprise Applications
The device provides a low cost solution for SMB
enterprise networks
Top Performance: maximum distances 2Km
MM, 150Km SM, 20Km SFS, 100m copper port
in any network architecture
www.fibrolan.com
Managed Fiber Optic cost effective SME topology
Headquarters
Switch 10/100
100Base-TX
MetroView
100Base-TX
Main Servers
F.CON12M
100Base-FX FDX
Department A
S.CON1M
Department B
S.CON1M
Department D
S.CON1M
Department P
LTA31M
100Mb
100Base-TX
10Mb
10Mb
Switch
Switch
Switch
Switch
VI-15
Fiber Local Traffic Aggregator – LTA series
LTA41/LTA31M
• Local traffic aggregator, 4/3 10/100M TP ports to 100BaseFX port, operating at L2
• Supports basic VLAN (port based) and QoS functionality
• FDX Flow Control, HDX back-pressure Flow Control
• Copper ports support Auto-Negotiation and Auto-Cross
• Unmanaged (LTA41) and SNMP managed (LTA31M) versions
• Frame size up to 1536 bytes
• The fiber link implements FEF
(Far End Fault) to provide a 2 way FO link integrity test
• DIP Switches for basic setup
• Extensive monitor and diagnostic LEDs
• Extended Temperature Range option for industrial
environment
• Reliability: internal quality power-supply
(AC or optional DC P.S.)
• Flexibility: desk-top, or wall mount installations
VI-16
Enterprise applications
The device provides a low cost, effective
solution for remote business users connectivity.
Suitable applications are also FTTD and FTTH
Top Performance: maximum distances 2Km
MM, 150Km SM, 20Km SFS, 100m TP port
in any network architecture
www.fibrolan.com
Cost effective managed FTTH topology
INTERNET
Service Provider
Metro Ethernet
Network
GE Links
MetroStar System
GE
Switch / Router
100Base-TX
Management
Up to 24*100Mb Links
100Base-FX FDX
Building A
LTA31M
LTA31M
Building C
10/100Mb
Subscribers
Building B
LTA31M
Subscribers
LTA31M
100Base-TX
Building M
100Base-TX
Typical Floor
Typical Floor
VI-17
Fast Ethernet Converter/Dual Fiber Link Access
DLA22/DLA22M
• Dual link access device, with 2 10/100 TP ports and 2
100BaseFX ports, L2 operation
• Supports basic VLAN (port based) and QoS functionality
• Unmanaged (DLA22) or SNMP managed (DLA22M) versions
• Suitable for string and ring applications (with proper
termination equipment)
• Features a backup mode for channel redundancy
• FEF feature: to test the FO Links integrity
• Hardware based 10/100, Full/Half, Flow Control,
Auto-Negotiation, and MDI/MDI-X Auto-Crossover
• Wire speed reception and transmission
• Support 1K MAC addresses
• Port based VLAN (via DIP switches)
• ETR: Extended Temperature Range (-10º ÷70º)
• DIP Switches facilitate the proper setting of the device
and individual ports
• Reliability: internal quality power-supply
(AC or optional DC P.S.)
• Flexibility: desk-top, or wall mount installations
VI-18
Miscellaneous applications
The device provides a Low cost, effective
solution for various topologies:
P2P configuration
ADM (add&drop architecture )
Ring / String configurations
Backup: redundant FO link for mission critical
applications
DLA22M Main Management features:
1. VLAN Tagging support
2. Per port based priority, 802.1p and TOS based
Priority schemes
3. Broadcast Storm protection
4. Telnet support
5. Remote software download
Top Performance: maximum distances 2Km
MM, 150Km SM, 20/40Km Single Fiber, 100m copper
ports in any network architecture
www.fibrolan.com
Managed Surveillance Network
Central Station
Enterprise
Switch
SNMP Manager
Servers
100Mbps FDX
DLA22M
Monitor
DLA22M
Typical station
DLA22M
DLA22M
DLA22M
Multimedia
Gateway
DLA22M
DLA22M
F/O Link
VI-19
ATARA100M
Any to Any Redundant SNMP Managed Fast Ethernet Access Device
• ATARA100M is an SNMP managed 100Base-TX to 100Base-FX Redundant Link Access Device
• 2 uplink (SC) and 2 local copper (RJ45) ports
• Any-to-Any protection (TP and F/O Main&Backup Links)
• Ultra fast Link switch-over
• Tunable switch-back filter enhances network stability
• FEF (Far End Fault), Loop-Back test, Flow Control
• Selective Fault Propagation
• SLE feature ( Subscriber Link Emulation)
• Bandwidth (Upstream and Downstream)
• Distance up to 100km, 20km over SFS
• Management: SNMP (Telnet, CLI)
• Remote software upgrade
VI-20
• Connection of medium/large customers
• Disaster recovery
• Extremely high availability and SLAs
• Data centers
• F/O Link and local servers protection
• Optional Dual Channel operation –optimized logistic
www.fibrolan.com
End to End FE redundancy network
Central Site
Switch-A
Switch-B
100Base-TX
Group A
Users
Group B
Users
Management
TP Main
100Base-TX
TP Backup
TP
MCM100-RL module
Main FO Link
Remote Site
Backup FO Link
ATARA100M
Mngmt
TPM1=TP Main Link
Enterprise Server
100Base-TX
TPM1
TPB1
TPB1=TP Backup Link
Switch
VI-21
ATARA1000M
Any to Any Redundant SNMP Managed GE Access Device
• ATARA1000M is a SNMP managed 1000Base-T to 1000Base-LX Redundant Link Layer 1 Access Device
• MTU: up to 10K octets
• 2 uplink (SC) and 2 local copper (RJ45) ports
• 1000Base-T ports: Auto-Cross, Cat.6 STP cabling, 100m
• Any-to-Any protection (TP and F/O Main&Backup Links)
• Ultra fast Link Switch-Over (~10µsec)
• Tunable switch-back filter enhances network stability
• FEF (Far End Fault)
• Loop-Back test on each port
• LST (Link Segmentation Test)
• Upstream and Downstream Bandwidth
• 1000Base-X Auto-Negotiation support
• Management: SNMP (Telnet, CLI)
• Possible covered distance: 10, 20, 40, 80Km SM fiber
• Remote software upgrade
VI-22
• Connection of medium/large users
• Disaster recovery
• Extremely high availability and SLAs
• Data centers
• F/O Link and local servers protection
• Dual Channel operation – optimized logistics
www.fibrolan.com
Railway Redundancy Network
North Railway Station
Main Central Railway Station
ATARA1000M
Tickets Machines
ATARA1000M
TP
Station A
Main
F/O Links
Backup
Management
F/O Links
TP
Station B
GE
Servers
Station C
F/O Links
ATARA1000M
South Railway Station
VI-23
Gigabit Ethernet Converters and Extenders – GSM1000 series
GSM1000/GSM1000M
• Single pass- through GE SX/LX to 1000Base LX channel link
• Two fiber ports (Port 1=1000SX-LX/UNI,
Port 2 = 1000Base-LX/OA)
• Based on 3R Technology
F/O ports: Simplex/Duplex SC, MM, SM, and SFS
• Distance up to 120Km, up to 20Km over SFS
• Jumbo frames:10K octets
• Loop-back for each FO port
• Features: LST, SLE, Rate Limiting
• Upstream bandwidth
• Dying Gasp (GSM1000M)
• Optional internal DC Power Supply (-48VDC)
• DIP Switches for basic setup
• Optional Extended Temperature Range
• Versatile installation: desktop, shelf, or wall mount
VI-24
• The GSM1000 series are unmanaged devices
• The GSM1000M series are Master Units
(SNMP managed & MA™ management protocol)
• Layer 1 GE services for business/residential
customers
• Data Centers
• Transmission/extension applications
• Remote site connectivity: Extender 120x120Km
• Medium/Large Enterprise networks
www.fibrolan.com
Remote LAN connectivity
10/100/1000Mb Switch
Headquarters
1000Base-T
File Servers
Management
10Base-T
GSM1000M
1000Base-LX - 120Km
Branch site
GSM1010/MA
1000Base-SX
10/100/1000Mb Switch
1000Base-T
Management
TP
VI-25
GE Converters and Extenders – GSM1010 series
GSM1010/GSM1010M
• Single pass- through 1000Base-T to
1000Base-SX/LX channel link
• One copper interface and one FO interface (S/LX)
• Based on 3R Technology
• F/O ports: Simplex/Duplex SC, MM, SM, and SFS
• Distance up to 120km, 20km over SFS
• Jumbo frames:10K octets
• Loop-back test, LST, SLE, Rate Limiting
• Upstream bandwidth
• Dying Gasp (GSM1010M)
• Front panel DIP switches for basic setup
• Optional internal DC Power Supply
• Optional ETR (Extended Temperature Range)
• Versatile installation: desktop, shelf, or wall mount
VI-26
• GSM1010 series are unmanaged devices
• GSM1010M series are SNMP and MA™
management protocol Master units
• Layer 1 GE services for business/residential customers
• Data Centers
• Medium/Large Enterprise networks
• Transmission/extension applications
• Remote site connectivity: Extender 120x120Km
• Remote In-Band FibroLAN MA™ rich
management
www.fibrolan.com
Managed Remote LAN connectivity
10/100/1000Mb Switch
Headquarters
1000Base-T
GSM1007MA
File Servers
Management
10Base-T
GSM1013M
1000Base-LX - 80Km
1000Base-LX - 80Km
Branch site
GSM1013M
1000Base-T
10/100/1000Mb Switch
1000Base-T
Management
TP
VI-27
Advanced Stand-Alone E1/T1 Fiber Converters
FEM/FTM
• Local Traffic Aggregator: 4x10/100BaseTX and 1E1or 4E1 ports (FEM/FEM4 series)
• Local Traffic Aggregator: 4x10/100BaseTX and 1T1or 4T1 ports (FTM/FTM4 series)
• User selectable Encoding ( HDB3/B8ZS/AMI)
• Link distances : up to 150Km
• Tx jitter attenuation
• Local and Remote Loop-back
• Far-End –Fault Signaling
(FO Link integrity test in both directions)
• Frame length range: 64÷1916 bytes
• AIS (Alarm Indicator Signal) on LOS
• 10/100Base-TX ports:
Auto-Negotiation and Auto-Cross
• DIP switches for basic setup
VI-28
• Optional internal DC Power Supply
• Optional ETR (Extended Temp. Range)
• Extensive LEDs status and diagnostics
• Fail safe deployment
• The FEM/FTM devices allow the migration of existing infrastructure from TDM to Metro Ethernet
• Mobile Backhaul requiring E1/T1 and Ethernet
• Legacy TDM and IP Networks are tunneled over
a single data flow stream
• The FEM/FTM utilize FibroLAN.s unique technology that multiplexes the time sensitive E1/T1 traffic together with standard IP traffic
• Business access offering Ethernet and PABX
interconnections
• Enterprise applications
www.fibrolan.com
E1 over Ethernet infrastructure
Site A
Site B
FEM4
FEM4
Optic Fiber
Legacy
PBX
PBX
Ethernet
Users
Servers Farm
VI-29