winter - Cub Cadet

cubcadet.eu
BE PREPARED!
TH
W
PRODUCT PROGRAM 2014/15
E
SNO
WINTER
OLU
TH
T
AG
REV
REE-S
TIO
NAR
RO WERS
Y
THREE-STAGE
THE RIGHT SOLUTION
FOR ANY DEMAND!
The Cub Cadet snow thrower programm. The best size and technique for all snow conditions. A single-stage model for regions with
little snow fall and small areas, the 2-stage models for medium to heavy snow and the revolutionary 3-stage models which even pull
through packed and wet snow with ease.
INNOVATIVE FEATURES FOR AN INCREDIBLE EXPERIENCE
CUB CADET
The core of the 1X Series exists of a rugged and cord reinforced rubber auger. Once
in action, this rubber auger clears the path down to ground. Thanks to its ergo handle
with remote control for the chute channel, a working light and even an electric start,
this small power pack delivers highest comfort in a compact design.
• FOR LIGHT SNOW FALL
• GENTLE TO THE PAVEMENT
• IDEAL FOR WALKWAYS AND DOORWAYS
2
cubcadet.eu
The 2X Series removes snow with a 2-stage system. At first stage, several "X-treme"
segments, at right angle to the drive direction bite their way even through harsh and
packed snow and pull it into the auger housing. The second stage is a fast rotating
impeller which powerfully throws the snow far away through the chute channel.
• FOR MEDIUM TO HEAVY SNOW FALL
• FAST AND EFFICIENT SNOW CLEARING
• IDEAL FOR WIDE WALKWAYS, PARKINGS, ETC.
The revolutionary 3X-Series with 3-stage technology. At first stage two X-treme
segments in the outer part of the auger housing are pushing the snow to the center,
where at second stage a central X-treme segment drills through the snow and pushes
it to the third stage, the impeller, which powerfully throws the snow through the chute
channel far away into the desired direction.
THREE-STAGE
THE REVOLUTIONARY 3X SERIES WITH 3-STAGE TECHNOLOGY
1. STAGE
25%
2. STAGE
MORE SNOW
THROUGHPUT
30%
3. STAGE
TIME
SAVING
MUCH EASIER AND
EFFORTLESS CONTROL
•FOR HEAVY AND WET SNOW CONDITIONS
• POWERFUL AND TIME-SAVING SNOW CLEARING
• IDEAL FOR FAST SNOW CLEARING OF LARGER AREAS
3
THREE-STAGE
THREE-STAGE
KEEP THE PATH
TO YOUR HOME CLEAN AND CLEAR.
All Cub Cadet snow throwers are made of solid steel and other high quality components. All technical features and advantages are
premium level and designed for many years of hard work. The following technical details are just some of many advantages which
make it so easy and comfortable to clear the path through the snow with Cub Cadet.
INNOVATIVE FEATURES FOR AN INCREDIBLE EXPERIENCE
CUB CADET
OHV Winter engines with large fuel tanks
The Cub Cadet 4-cycle OHV winter engines offer improved starting and a low emission
and are especially developed for low temperatures. The large fuel tank allows for a long
working without refueling. Thanks to their large displacement they offer enough power even
in toughest conditions.
Electric start
Thanks to the 230 Volt electric start, you can conveniently start your snow thrower by just
connecting it with a socket-outlet and pressing the starter button. One push and you are
ready to go.
Clutch lock
The clutch lock system keeps both the drive clutch and auger clutch engaged with just
one hand. This gives the possibility to change the chute direction or ground speed during
operation. A big time saving element and more comfort while out in the snow.
Fingertip trigger controls
Zero-turn power steering is at the tip of your fingers to help you get the job done faster with
effortless, single-hand turning. Easily manoeuvre driveways of all shapes and sizes, so you
can get the job done in less time and with less effort.
4
THREE-STAGE
cubcadet.eu
THREE-STAGE
Heated hand grips
Keep your hands warm to finish the job in comfort! To activate the heated grips, just move
the switch found on the rear of the dash panel into the ON position. The handles stay warm
and you can keep working through the coldest weather.
Shear bolts
The shear bolts connect the "Xtreme Auger" segments with the drive shaft. If one "Xtreme
Auger" segment blocks, the shear bolt of this particular segment will act as a rated break
point, which prevents other turning parts from breaking. After replacing the shear bolt, the
snow thrower is ready for use again. This extends the life-cycle of the machine and reduces
maintenance and repair costs to a minimum.
High discharge chute
The discharge chute is exceedingly high and consists of plastic on the 2X Series and rugged
steel on the 3X Series. It is clog-resistant and assures an optimal discharge of the snow.
Snow throwing direction and width can be adjusted conveniently from the dashboard.
COOL BLUE skid shoes
The revolutionary COOL BLUE skid shoes glide along surfaces for better manoeuverability.
The advanced long-lasting material won’t rust or mar your drive way. The space between
the shave plate and the ground can be adjusted by raising or lowering the skid shoes. For
close snow removal, e.g. on a smooth concrete or asphalt driveway, place them in the low
position. Use the middle or high position when the area to be cleared is uneven. When
operating on gravel, choose the high position.
Working lights
The bright in-dash headlights allow a safe handling even in the darkness.
Drift cutters
The drift cutters which are mounted on both sides of the auger housing, break deep snow
banks away and thus allow the snow thrower to power through even the heaviest drifts.
Better performance and easier working in extremely deep snow.
Shovel
Conveniently fastened to the rear of the auger housing, the shovel is designed to clear the
discharge chute when it is clogged. Quick and easy access.
LOCATE A DEALER AT
CUBCADET.EU
PLEASE ASK YOUR DEALER FOR MORE INFORMATIONS.
5
THREE-STAGE
SNOW
THROWERS
SERIES 500 & 700
526 HD SWE
528 HD SWE
530 HD SWE
730 HD TDE
THREE-STAGE
FEATURES
..................................
REVOLUTIONARY
3-STAGE AUGER SYSTEM
..................................
UP TO 76 CM
CLEARING WIDTH
..................................
58 CM INTAKE HEIGHT
..................................
FULL METAL DISCHARGE
CHUTE
..................................
ONE STEP AHEAD
The revolutionary 3X Series from Cub Cadet pulls through harsh and wet packed snow like a tunnel drilling
machine through a mountain. That's basically what our 3-stage auger system does. It no longer scratches
and break up the snow, it rather drills into it and presses it to the next stage, a vertical impeller which throws
out the snow far up and away from the path. Another innovative technique made by Cub Cadet.
CUB CADET
INNOVATIVE FEATURES FOR AN INCREDIBLE EXPERIENCE
CONVENIENT
ADJUSTMENT OF SNOW
THROWING DIRECTION
AND WIDTH FROM BEHIND
THE DASHBOARD
3X Steel accelerator auger system
The innovative design of our auger system is now drilling into the
snow with a central auger built in drive direction. It is supported by
each an auger element on the L.H. and R.H. side to move the snow
to the center accelerator which pushes it to the vertical impeller, that
throws the snow far out.
..................................
COMFORTABLE 230 V
ELECTRIC START
..................................
CUB CADET 4-CYCLE
OHV WINTER ENGINE
Steel chute channel & chute flap
..................................
The chute channel on all our 3X Series snow throwers is made
of thick solid steel to do the job reliably for many years. With
the remote chute flap you can adjust the throwing distance and
height from throwing right next beside the machine up to as far as
18 metres away.
HEATED HAND GRIPS
..................................
CLUTCH LOCK SYSTEM
..................................
WORKING LIGHT
..................................
COOL BLUE
POLYMER SKID SHOES
..................................
Remote chute control
DRIFT CUTTERS
Turn the chute channel conveniently 200° from left to right from
behind the dashboard in no time. The throwing distance can easily
be adjusted with the on dash lever.
..................................
Balance system (730 HD TDE)
1.
cubcadet.eu
6
2. 3.
4.
1. Packed snow: Bringing the lever
in the „packed snow“ position, the
weight is shifted to the front end of
the snow thrower and presses this on
to the ground.
2. Normal snow: This position allows
the user to easily manoeuver the unit
in normal snow conditions.
3. Gravel position: Use this position
when clearing gravel or split walkways
from snow to prevent gravel to be
picked up.
4. Transport position: In this position
the auger housing is lifted off the
ground for easy moving without
leaving scratches on the pavement.
THREE-STAGE
THREE-STAGE
Model name
Engine
4-cycle OHV Winter engine
Nominal power (kW / min-1)
Starter
Fuel capacity
Clearing width / Intake height
Auger system
Cool Blue skid shoes
Auger diameter / material
Auger system
Safety &
Comfort
Chute
system
Drive system
Impeller diameter
526 HD SWE
528 HD SWE
530 HD SWE
730 HD TDE
Cub Cadet 90, 357 cm³
Cub Cadet 90, 357 cm³
Cub Cadet 130, 420 cm³
Cub Cadet 130, 420 cm³
7,4 / 3600
7,4 / 3600
8,3 / 3600
8,3 / 3600
230 V electric start
230 V electric start
230 V electric start
230 V electric start
4,7 l
4,7 l
4,7 l
4,7 l
66 cm / 58 cm
71 cm / 58 cm
76 cm / 58 cm
76 cm / 58 cm
Heavy duty polymer
– prevent scratches
Heavy duty polymer
– prevent scratches
Heavy duty polymer
– prevent scratches
Heavy duty polymer
– prevent scratches
30 cm / steel
30 cm / steel
30 cm / steel
30 cm / steel
3-stage, with Xtreme-Auger
segments
3-stage, with Xtreme-Auger
segments
3-stage, with Xtreme-Auger
segments
3-stage, with Xtreme-Auger
segments
30 cm
30 cm
30 cm
30 cm
Grease fittings
maintenance free
maintenance free
maintenance free
maintenance free
Power Steering
Fingertip trigger controls
Fingertip trigger controls
Fingertip trigger controls
Fingertip trigger controls
Speeds
6 forward / 2 reverse
6 forward / 2 reverse
6 forward / 2 reverse
6 forward / 2 reverse
Tires
16" x 4,8", X-Trac
bolded Winter tread
16" x 6,5", X-Trac
bolded Winter tread
16" x 6,5", X-Trac
bolded Winter tread
Track drive
crank / 200°
crank / 200°
crank / 200°
crank / 200°
2-way-joystick
2-way-joystick
2-way-joystick
2-way-joystick
28 V / 28 W
28 V / 28 W
28 V / 28 W
28 V / 28 W
116 kg
118 kg
120 kg
125 kg
Chute rotation
Pitch control
Heated hand grips
Headlight
Weight (approx.)
= included
– = not available
7
TWO-STAGE
SNOW
THROWERS
SERIES 500 & 900
524 SWE
933 SWE
FEATURES
..................................
UP TO 84 CM
CLEARING WIDTH
..................................
UP TO 56 CM
INTAKE HEIGHT
..................................
CONVENIENT
ADJUSTMENT OF SNOW
THROWING DIRECTION
AND WIDTH FROM BEHIND
THE DASHBOARD
..................................
COMFORTABLE 230 V
ELECTRIC START
..................................
CUB CADET 4-CYCLE OHV
WINTER ENGINE
..................................
MADE BY THE BEST
TO HANDLE THE WORST.
The Cub Cadet 2X Series 2-stage snow throwers can tackle winter’s biggest storms. Electric start Cub Cadet
OHV 4-cycle engines, power steering and heavy-duty steel augers mean these snow throwers start quickly
and move effortlessly through the harshest conditions. The high-impact polymer chute and steel shave plate
make it amazingly easy to operate through heavy snow and ice, so you’re out of the cold faster.
INNOVATIVE FEATURES FOR AN INCREDIBLE EXPERIENCE
CUB CADET
Safety first
All our snow throwers are equipped with a spring loaded finger
guard, which prevents you from injuries but can tilt back when heavy
snow loads need to get through.
HEATED HAND GRIPS
..................................
COOL BLUE
POLYMER SKID SHOES
..................................
STEEL DRIFT CUTTERS
..................................
CLUTCH LOCK SYSTEM
..................................
Chute control (524 SWE)
4-way chute control allows you to quickly and effortlessly change
the direction and pitch of the snow you throw with one hand, so you
don’t waste time. You will spend less time in the cold as you control
where you want the snow to be thrown.
X-trac tires
The tires have a special X-Trac tread. This allows for a perfect grip
in the snow. No snow chains required!
2X Xtreme-Auger
Instead of one shear pin per auger half, the „Xtreme Auger“ has one
shear pin in each individual Xtreme Auger segment. This reduces
maintenance costs. Snow and ice are „chopped“ up by the auger
blades before being fed into the impeller, which transfers the snow
through the chute. Advanced technology for better performance.
cubcadet.eu
8
Chute control
(Modell 933 SWE)
Engine
Model name
524 SWE
933 SWE
4-cycle OHV Winter engine
Cub Cadet 70, 208 cm³
Cub Cadet 110, 357 cm³
Nominal power (kW / min-1)
3,9 / 3600
7,4 / 3600
230 V electric start
230 V electric start
1,9 l
4,7 l
Starter
Fuel capacity
Clearing width / Intake height
61 cm / 53 cm
84 cm / 56 cm
Heavy duty polymer – prevent
scratches
Heavy duty polymer – prevent
scratches
30 cm / steel
41 cm / steel
2-stage, with Xtreme-Auger
segments
2-stage, with Xtreme-Auger
segments
30 cm
41 cm
Grease fittings
on auger bearings
on auger bearings
Fingertip trigger controls
Fingertip trigger controls
6 forward / 2 reverse
6 forward / 2 reverse
15" x 5", X-Trac bolded
Winter tread
16" x 6,5", X-Trac bolded
Winter tread
4-way-joystick / 200°
crank / 200°
4-way-joystick
2-way-joystick
Auger system
Cool Blue skid shoes
Auger diameter / material
Auger system
Drive system
Power Steering
Chute
system
Chute rotation
Safety &
Comfort
Impeller diameter
Heated hand grips
Speeds
Tires
Pitch control
Headlight
Weight (approx.)
= included
28 V / 28 W
28 V / 28 W
84 kg
150 kg
Remote chute
flap control
Adjust the throwing distance conveniently with the 2-way joystick on the
dashboard during operation.
Chute crank
system
Turn the chute from side to side simply
by using the crank. Due to the clutch
lock system this can be done during
operation.
– = not available
9
200 SERIES
SINGLE-STAGE
SNOW THROWER
221 LHP
FEATURES
..................................
53 CM CLEARING WIDTH
..................................
33 CM INTAKE HEIGHT
..................................
CHUTE ROTATION
190 DEGREES
..................................
CUB CADET OHV
4-CYCLE WINTER ENGINE
..................................
ELECTRIC START AND
RECOIL START, EASY
STARTING EVEN WITH
MITTENS
..................................
REVERSIBLE, POLYMER
SCRAPER
..................................
HEADLIGHT
..................................
FUEL LEVEL INDICATOR
..................................
FOLDABLE, ERGONOMIC
HANDLE
..................................
SMALL JOBS
JUST GOT SMALLER.
The 1X Series has the superior quality and performance you expect in a compact, easy-to-use machine. The
adjustable ergonomic handle and high-impact, clog-resistant polymer chute make it easy for you to clear
light to moderate snow with speed and comfort. And the in-dash headlight allows for a nice clean driveway
at any time of day or night.
INNOVATIVE FEATURES FOR AN INCREDIBLE EXPERIENCE
CUB CADET
Remote chute control
Throw the snow in any direction you want, with the on-dash remote
control. Conveniently, comfortable and effortless.
Electric start & large control buttons
Large and easy to access control elements make it simple to control
the power even with winter gloves. It's incredibly easy to start in
tough winter conditions thanks to the 230 Volt electric starter.
High-performance auger system
This specially designed auger system works like a paddle and
shovels the snow into the auger housing and then throws it out
through the discharge chute. The auger is made of reinforced heavy
duty rubber to avoid damages to the pavement. You will clear your
driveway and sidewalk with less effort.
cubcadet.eu
10
Mitten grip
Model name
221 LHP
Auger system
Engine
4-cycle OHV Winter engine
Nominal power (kW / min-1)
Starter
Cub Cadet 70, 208 cm³
3,9 / 3600
230 V electric start
Fuel capacity
1,9 l
Clearing width
84 cm
Intake height
56 cm
Scraper
Polymer / reversible
Auger diameter / material
Auger system
41 cm / reinforced heavy duty rubber
Single stage
Chute
Drive
system system
Drive system
Oil fill tube
Extended for easy service
Headlight
12,8 V / 21 W
Tires
Pitch control
Remote lever / operator position / 190°
Remote lever / operator position
Weight (approx.)
= included
Provides clear information on the fuel
level without the need
for opening the gas
cap.
Auger-assist
8" x 2", ball bearings
Chute rotation
Fuel level
indicator
23 cm
Safety &
Comfort
Impeller diameter
The extra large mitten
grip starter handle is
just another well engineered detail which
makes the difference
of this premium snow
thrower.
Ergo-handle
with full bail switch
allows for fatigueproof operation.
41 kg
– = not available
11
WINTER
EQUIPMENT
FOR CUB CADET LAWN- AND GARDEN TRACTORS
Use your Cub Cadet lawn- or garden tractor all year around with the right attachments. With a front mounted dozer blade or snow
thrower in combination with snow chains and spreader you are prepared for the challenges of a long lasting winter season.
INNOVATIVE FEATURES FOR AN INCREDIBLE EXPERIENCE
CUB CADET
Dozer blades
• OEM-190-833
117 cm dozer blade, fits all 700 and 1000 series lawn tractors.
• With adjustable spring loaded overload protection system
• 3 angling options (left, right, straight)
• With remote lifting handle to operate from the driver's seat
• 19A40022100
117 cm dozer blade for garden tractor GTX 2100.
• Heavy duty fabricated version
• With adjustable spring loaded overload protection system
• 3 angling options (left, right, straight)
• With remote control handle to fully operate and lift from the driver's seat
Rubber lip for dozer blades
• 196-718-678
Universal rubber blade lip for all our dozer blades.
Simply cut it to your desired length.
Front mount 2-stage snow thrower
• OEM-190-032
Fits 1000 series side discharge tractors.
• 107 cm clearing width
• Full remote control from driver's seat
• Belt drive system and front mount bracket included
Front mount sweeper
12
• 196-226C678
Fits 1000 series rear discharge tractors.
• 105 cm working width
• Full remote control from driver's seat
• Belt drive system and front mount bracket included
• 196-227A678
Front collector for front sweeper model 196-226C678
cubcadet.eu
Snow chains
• 196-664-6431 set of tire chains, for tire dimension 18" x 6.5"
• 196-898A6991 set of tire chains, for tire dimension 18" x 9.5"
• 196-964-6781 set of tire chains, for tire dimension 23" x 9.5"
Broadcast spreader
• 196-031-000Tow-Broadcast spreader, weight approx. 8 kg, volume 39 kg, spread width up to 300 cm,
pneumatic tires
Battery charger
• 196-967-678Electric battery charger with 12 V plug, 1000 mA for all tractor models
13
ACCESSORIES
FOR CUB CADET SNOW THROWERS
Make more out of your snow thrower with an additional dozer blade. Use this dozer blade, when having little snow fall only, or thin
layers of heavy wet snow.
INNOVATIVE FEATURES FOR AN INCREDIBLE EXPERIENCE
CUB CADET
Dozer blade
• 396-004-678
Suitable for all Cub Cadet 2X and 3X Series snow throwers
• 100 cm working width
• Zinc coated
• Pivoting to the right and left
• With fast attach system
• 396-005-678
Optional rubber lip
Cover for snow throwers
• 2024-U1-0005
Fits all Cub Cadet snow throwers
• Heavy gauge vinyl cover with straps
• It is UV-resistant and water-repellent
• Measurements: approx. 170 x 80 x 100 cm
Shear bolts
• 7011-M6-0010
• For all models except 933 SWE
The shear bolts connect the auger with the drive shaft.
In case of unintended blocking of the auger, the shears act as rated break points.
Set of 4 bolts and cotter pins.
• 7011-M6-0011
• For model 933 SWE
Winter engine oil
• 6012-X1-0040
We recommend the use of Cub Cadet winter oil for all Cub Cadet snow throwers.
• Special winter engine oil (SAE 5W-30)
• Capacity: 1000 ml
Fuel stabilizer „Easy-Run“
• 6012-X1-0045
14
Snow throwers have often long period of non-use. Therefore, we recommend to use
a fuel stabilizer. This fuel conservation with oxidation protection binds water and protects
the system against rust and corrosion. A reliable starting is thus assured.
• Capacity: 250 ml
*Manufacturin
g gu
ara
nty
of
MT
D
Benefit from a 3-years warranty when
buying a Cub Cadet snow thrower!
ary performanc
lement
e, va
lid o
supp
nly
ited
m
i
thr
,l
G
ou
A
gh
s
ct
re
u
d
*
det.eu
c.cubca
://b2
ttps
nh
no
tio
ra
st
gi
WARRANTY
Pr
o
cubcadet.eu
In order to acquire the 3-years warranty,
you only have to register your snow thrower within
a maximum of 60 days from the day of purchase.
For more information, please visit the registration page:
https://b2c.cubcadet.eu
The 3-years warranty is then valid according to the MTD Products AG warranty conditions.
Please ask your authorized dealer for more information.
* Manufacturing guaranty of MTD Products AG, limited supplementary performance, valid only through registration on https://b2c.cubcadet.eu
.............................................................................................................................................
LOCATE A DEALER AT
CUBCADET.EU
PLEASE ASK YOUR DEALER FOR MORE INFORMATIONS.
Your parts specialist
Perfect match, high durability.
Since November 2011 ARNOLD offers a various range of
wearing parts and accessories for gardening, forestry and
landscaping use all over Europe.
Cub Cadet spare parts
Additional to our variety of spare parts for all common
brands ARNOLD is offering high quality workshop equipment
and various accessories.
Designed for your machine
Offer the best performance & reliability
From Air filter till Wheels
Only original parts get your machine warranty
The ARNOLD program includes all products to make working
in and around the garden more comfortable and safe.
Rapid and sustained availability in Europe
All ARNOLD articles are available for you in the market.
Tested according to our highest standards
15
cubcadet.eu
SERVICE AND MORE
Cub Cadet equipment is only available from an authorized
Cub Cadet dealer, who can offer you a wide range of products
and services. The dealer aims to provide fast, convenient
service for you, whether you are interested in a new piece of
equipment or simply need more information about a product
or service.
Delivery service:
Each Cub Cadet dealer's sales staff is specially trained in
selling lawn and garden equipment as well as snow throwers.
They have been advising customers for many years and will
help you choose the right piece of equipment.
Large pieces of equipment that you are unable to transport
yourself can be delivered right to your door by the Cub Cadet dealer.
Demonstration:
Repair service:
Your Cub Cadet dealer offers you the chance to start up
the equipment and try it out yourself before you buy. At
Cub Cadet, you know what you’re getting!
If your equipment ever breaks down, your Cub Cadet dealer
won’t send it away but will repair it in his own workshop.
Cub Cadet dealers specialize in providing repairs and
replacement parts.
Professional assembly:
Financing:
Cub Cadet dealers fully assemble all equipment so you can
start using it right away. Only well-assembled equipment and
thorough instructions guarantee satisfaction.
Would you like to pay for your new equipment conveniently
over the next few years? No problem! Your Cub Cadet
dealer can offer you a suitable financing option.
Art.No. 092.59.629
Professional advice:
Further information on Cub Cadet products: www.cubcadet.eu
European Headquarters:
MTD Products Aktiengesellschaft • Industriestraße 23 • D-66129 Saarbrücken • Tel.: 0049 (0) 68 05 / 79-202
Fax: 0049 (0) 68 05 / 79-4 01 • www.mtdproducts.eu • e-mail: [email protected]
© 2014 MTD Products Aktiengesellschaft, Germany
Text and photographs, specifications of dimensions and performance are composed with greatest care. The correctness of the information cannot be
guaranteed, especiallyit is not guaranteed that the products comply with the images regarding technique, color, form and equipment or that the products
comply with the proportion of the images. Amendments due to misprints or errors are reserved. Please see the operator’s manual and the warning labels
posted on the vehicle itself for more details. Subject to changes in prices. This catalog is valid to the publication of the new Cub Cadet snow thrower catalog.
(Status: March, 2014)