PAINTS AND COATINGS

Industrial & Consumer Specialties
PAINTS AND
COATINGS
CLARIANT INTERNATIONAL LTD
Clariant International Ltd.
Industrial & Consumer Specialties
Global Marketing Paints & Coatings
4132 Muttenz
Switzerland
Phone +41 61 469 7612
Clariant Produkte (Deutschland) GmbH
Industrial & Consumer Specialties
Global Marketing Paints & Coatings
65926 Frankfurt am Main
Germany
Phone +49 69 305 6308
Internet
http://www.clariant.com
http://www.paints-coatings.clariant.com
E-Mail
[email protected]
© Copyright 2012 The Clariant Corporation
This information corresponds to the present state
of our knowledge and is intended as a general
description of our products and their possible
applications. Clariant makes no warranties, express
or implied, as to the information’s accuracy,
adequacy, sufficiency or freedom from defect
and assumes no liability in connection with any
use of this information. Any user of this product
is responsible for determining the suitability of
Clariant’s products for its particular application.
Nothing included in this information waives any of
Clariant’s General Terms and Conditions of Sale,
which control unless it agrees otherwise in writing.
Any existing intellectual/industrial property rights
must be observed. Due to possible changes in our
products and applicable national and international
regulations and laws, the status of our products
could change. Material Safety Data Sheets providing
safety precautions, that should be observed when
handling or storing Clariant products, are available
upon request and are provided in compliance with
applicable law. You should obtain and review the
applicable Material Safety Data Sheet information
before handling any of these products. For
additional information, please contact Clariant.
For sales to customers located within the
United States and Canada the following
applies in addition NO EXPRESS OR
IMPLIED WARRANTY IS MADE OF THE
MERCHANTABILITY, SUITABILITY,
FITNESS FOR A PARTICULAR PURPOSE
OR OTHERWISE OF ANY PRODUCT OR
SERVICE.
®
Product and service marks protected by Clariant in many countries
TM Trademark at introductory stage
© 2010 Clariant International Ltd,
Rothausstrasse 61, 4132 Muttenz, Switzerland
Content
1 Decorative paints 1.1 Biocide 1.2 Special effects additive 1.3 Wetting agent 2 Emulsion polymerization 2.1 Biocide 2.2 Emulsifier (anionic) 2.3 Emulsifier (nonionic) 3 Intermediates for paint additives Clariant understands that the nature of the paints & coatings
industry requires a deep understanding of its value chain. Our
products have to fulfill stringent regulatory guidelines while
meeting high performance expectations at our customers.
No matter if an emulsifier has to generate an outstanding
particle size distribution in your monomer emulsion or a
dispersing agent should support the color strength of your
paint. Our portfolio meets the latest regulatory targets
concerning low levels of volatile organic components (VOC). Our brands stand for quality and consistency: • Emulsogen® helps you achieve excellent particle sizes
in emulsion polymerization to meet VOC and APEO
free requirements
• Dispersogen® helps you maintain and improve the
color strength of your pigments in a formulated paint
• JMAC®, our proprietary silver technology, combines
antimicrobial protection of your coating with anti-allergy
protection for your operators
Clariant: your partner for the paints and coatings industry 3.1 Intermediate 3.2 Solvent 4 Pigment preparations 4.1 Biocide 4.2 Dispersing agent 4.3 Humectant 3 3 3 5 5 5 7 7 13 13 13 13 13 15 17 Decorative paints
Special features
•
•
FDA registration n°
Appearance
Active content
Excellent temperature and pH
stability
Powder
100%
Excellent temperature and pH
stability
Liquid / Dispersion
10%
Excellent temperature and pH
stability
Powder
100%
Solution
9.5%
Excellent temperature and pH
stability
Liquid
20%
FDA approved
•
Product class
Low VOC
•
Description
APEO free
Solvent-borne paints
Name
Properties
Water-borne paints
Application
Biocide
JMAC Composite PG
JMAC LP 10
JMAC S 10
Nipacide BIT 10 W
Nipacide BIT 20
Nipacide BIT AS 20
Nipacide BK
Nipacide BSM
Nipacide BSM2
Nipacide CFX 2
Nipacide CFX 3
Nipacide CFX 4
Versatile biocide based on silver chloride onto titanium dioxide Silver Biocide
•
•
•
•
•
•
•
•
Versatile biocide based on silver chloride onto titanium dioxide Silver Biocide
•
•
•
•
•
•
Versatile biocide based on silver chloride onto titanium dioxide Silver Biocide
•
•
In-can biocide based on BIT
Isothiazolinone
In-can biocide based on BIT
Isothiazolinone
In-can biocide based on BIT
Isothiazolinone
Excellent temperature and pH
stability
Liquid / Dispersion
20%
In-can biocide based on Hexahydrotriazine (HHT)
Formaldehyde releaser
Provides head-space protection
Liquid
75%
In-can biocide based on BIT/MIT
Mixture of isothiazolinones
In-can biocide based on BIT/MIT
Mixture of isothiazolinones
In-can biocide based on CMIT/MIT + EDDM
Mixture of isothiazolinones and
formaldehyde releaser
•
In-can biocide based on CMIT/MIT + EDDM
Mixture of isothiazolinones and
formaldehyde releaser
•
In-can biocide based on CMIT/MIT + EDDM
Mixture of isothiazolinones and
formaldehyde releaser
•
•
•
•
•
•
Good temperature and pH
stability
Liquid
5%
•
•
Good temperature and pH
stability
Yellow liquid
10%
Provides head-space protection
Solution
Provides head-space protection
Liquid
23%
Provides head-space protection
Solution
35%
Nipacide CI
•
In-can biocide based on CMIT/MIT
Isothiazolinone
•
•
Concentrated biocide
Liquid
14%
Nipacide CI 15
•
In-can biocide based on CMIT/MIT
Isothiazolinone
•
•
Broad spectrum activity
Liquid
1.50%
Nipacide CI 15 MV
•
In-can biocide based on CMIT/MIT
Isothiazolinone
•
•
Broad spectrum activity
Solution
1.5%
In-can biocide based on EDDM
Formaldehyde releaser
Provides hHead-space
protection
Liquid
99%
In-can biocide based on CMIT/MIT +Bronopol
Mixture of isothiazolinones and halogen
active biocide
Broad spectrum activity
Solution
11%
Dry-film and in-can biocide based on IPBC
Carbamate
Broad spectrum fungicide
Liquid
30%
Nipacide FC
Nipacide IB
•
•
Nipacide IPBC 30
•
Nipacide JMBT 11
•
In-can biocide based on silverchloride on Titandioxide + BIT
Inorganic Biocide
•
In-can biocide based on silverchloride on titandioxide +
DBDCB
Inorganic Biocide
Nipacide KBS
•
In-can biocide based isothiazolinone and bronopol
Mixture of organic biocides
Nipacide PZI
•
Dry-film biocide based on zinc-pyrithione and IPBC
Mixture of pyrithione and carbamate
Nipacide PZT
•
Dry-film biocide based on zinc-pyrithione and s-triazine
Mixture of pyrithione and s-triazine
In-can biocide based on isothiazolinone and formaldehyde
donor biocide
Mixture of organic biocides
Dispersing agent for paints and coatings
Surfactant based dispersing agent
Nipacide JMDB 46
Nipacide TBXB
•
•
•
•
•
•
•
Dispersion
•
Dispersion
•
Liquid
15%
Carbendazim & diuron-free
Liquid / dispersion
25%
Carbendazim & diuron free
Liquid / dispersion
25%
Liquid
60%
Colourless, clear to cloudy
liquid
50%
Special effects additive
Dispersogen SNW
3
•
•
Compatibilizer for solventborne coatings
4
Decorative paints
Properties
Special features
Silicate paint stabilizer
Quaternary ammonium compound
Silicate paint stabilizer
Amine derivative
Wetting agent for decorative paints
Alkyl polyethylene glycol ether
Wetting agent, tinting strength enhancer and paint stabilizer
EO/PO block copolymer
Low-foaming, nonionic surfactant for the chemical industry
EO/PO block copolymer
Low-foaming, nonionic surfactant for the chemical industry
EO/PO block copolymer
FDA registration n°
Appearance
Active content
FDA approved
Product class
Low VOC
Description
APEO free
Solvent-borne paints
Name
Water-borne paints
Application
•
•
Stabilizes the viscosity of
silicate paints
Yellowish liquid
16%
•
•
Stabilizes the viscosity of
silicate paints
Yellowish liquid
20%
•
•
•
•
•
•
•
•
Special effects additive
Dispersogen SPS
Dispersogen SPV
•
•
Wetting agent
Emulsogen LCN 118
Genapol ED 3060
Genapol PF 10
Genapol PF 20
•
•
•
•
•
Improves latex stability
Chapter 21 § 175.105 / §
Clear liquid
176.170 / § 176.180 / § 181.30
Strong wetting, improves
compatibility and prevents
rubout
Chapter 21 § 181.30 / §
176.200 / § 176.210
80%
Yellowish liquid
100%
Clear, colorless liquid
100%
Clear, colorless liquid
100%
Emulsion polymerization
•
Special features
FDA registration n°
Appearance
Active content
Liquid / Dispersion
10%
Solution
9.5%
Excellent temperature
and pH stability
Liquid
20%
FDA approved
•
Product class
Low VOC
Styrene/Acrylate
•
Description
APEO free
Butadiene/Styrene latex
•
Name
E-PVC
Acrylate
Properties
Vinyl Acetate
Application
Biocide
JMAC LP 10
Nipacide BIT 10 W
Nipacide BIT 20
Nipacide BIT AS 20
Nipacide BK
Nipacide BSM
Nipacide BSM2
Nipacide CFX 2
5
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Versatile biocide based on silver chloride onto titanium dioxide Silver Biocide
Excellent temperature
and pH stability
In-can biocide based on BIT
Isothiazolinone
In-can biocide based on BIT
Isothiazolinone
In-can biocide based on BIT
Isothiazolinone
Excellent temperature
and pH stability
Liquid / Dispersion
20%
In-can biocide based on Hexahydrotriazine (HHT)
Formaldehyde releaser
Provides head-space
protection
Liquid
75%
In-can biocide based on BIT/MIT
Mixture of isothiazolinones
In-can biocide based on BIT/MIT
Mixture of isothiazolinones
In-can biocide based on CMIT/MIT + EDDM
Mixture of isothiazolinones and
formaldehyde releaser
•
•
•
•
•
Good temperature and
pH stability
Liquid
5%
•
•
Good temperature and
pH stability
Yellow liquid
10%
Provides head-space
protection
Solution
•
6
Emulsion polymerization
Acrylate
Butadiene/Styrene latex
Styrene/Acrylate
Properties
Vinyl Acetate
Application
•
•
•
•
•
•
•
•
Nipacide CI
•
•
•
•
In-can biocide based on CMIT/MIT
Isothiazolinone
•
•
Concentrated biocide
Liquid
14%
Nipacide CI 15
•
•
•
•
In-can biocide based on CMIT/MIT
Isothiazolinone
•
•
Broad spectrum activity
Liquid
1.50%
Nipacide CI 15 MV
•
•
•
•
In-can biocide based on CMIT/MIT
Isothiazolinone
•
•
Broad spectrum activity
Solution
1.5%
•
•
•
•
In-can biocide based on EDDM
Formaldehyde releaser
Provides hHead-space
protection
Liquid
99%
•
•
•
•
In-can biocide based on CMIT/MIT +Bronopol
Mixture of isothiazolinones and halogen
active biocide
Broad spectrum activity
Solution
11%
•
•
•
•
In-can biocide based isothiazolinone and bronopol
Mixture of organic biocides
Liquid
15%
•
•
•
•
In-can biocide based on isothiazolinone and formaldehyde
donor biocide
Mixture of organic biocides
Liquid
60%
Anionic emulsifier for emulsion polymerization
•
•
•
Alkyl polyethylene glycol ether sulfate,
sodium salt
•
•
•
•
•
•
•
•
•
•
•
•
In-can biocide based on CMIT/MIT + EDDM
Mixture of isothiazolinones and
formaldehyde releaser
•
In-can biocide based on CMIT/MIT + EDDM
Mixture of isothiazolinones and
formaldehyde releaser
•
FDA registration n°
Appearance
Active content
Provides head-space
protection
Liquid
23%
Provides head-space
protection
Solution
35%
FDA approved
Special features
Low VOC
Product class
APEO free
Description
E-PVC
Name
Biocide
Nipacide CFX 3
Nipacide CFX 4
Nipacide FC
Nipacide IB
Nipacide KBS
Nipacide TBXB
•
•
Emulsifier (anionic)
Emulsogen EPA 073
Emulsogen EPA 1954
Emulsogen SF 8
Genapol LRO liquid
Genapol LRO paste
•
Hostapal BV conc.
•
•
•
Hostaphat 1306
Hostapur OS liquid
Hostapur SAS 30
Hostapur SAS 60
Hostapur SAS 93
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Alkyl polyethylene glycol ether sulfate,
sodium salt
•
Anionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether sulfate,
sodium salt
•
Anionic emulsifier for emulsion polymerization
Tributyl phenol polyethylene glycol ether
sulfate, sodium salt
Alpha-olefin sulfonate, sodium salt
Anionic emulsifier for emulsion polymerization
Secondary n-alkyl sulfonate, sodium salt
Anionic emulsifier for emulsion polymerization
Secondary n-alkyl sulfonate, sodium salt
Anionic emulsifier for emulsion polymerization
Secondary n-alkyl sulfonate, sodium salt
Chapter 21 § 175.300 / Colourless, clear to
§ 176.170 / § 176.210 / cloudy liquid
§ 178.3400
50%
•
•
Anionic emulsifier for emulsion polymerisation
Anionic Surfactant for Industrial Applications
28%
•
Sulfosuccinate sodium salt
•
Chapter 21 § 175.105 / Clear, colourless to
§ 175.300 / § 176.170 / yellowish liquid
§ 178.3400
•
Anionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether phosphoric
acid mono /diester
•
•
Alkyl polyethylene glycol ether sulfate,
sodium salt
Anionic emulsifier for emulsion polymerization
28%
•
Anionic emulsifier for emulsion polymerization
•
Chapter 21 CFR §
Clear, colourless liquid
176.170 / § 176.180 / §
175.105
•
Provides good particle
size-control and
prevents particle
coagulation
•
•
•
•
•
•
•
•
•
•
•
Provides good particle
size-control and
prevents particle
coagulation
•
•
clear liquid
27%
Paste
68%-70%
Colourless to yellowish
paste
51%
Provides good particle
size-control and
prevents particle
coagulation
Chapter 21 § 178.3400
Clear, yellowish liquid
100%
Strong foaming agent
Chapter 21 § 175.105 /
§ 178.3400
Yellowish clear liquid
42%
Chapter 21 § 175.170 / Clear, slightly yellowish
§ 175.180 / § 178.3400 liquid
30%
Chapter 21 § 175.170 / Yellowish soft paste
§ 175.180 / § 178.3400
60%
Chapter 21 § 175.170 / Yellowish tablets
§ 175.180 / § 178.3400
93%
Emulsifier (nonionic)
7
8
Emulsion polymerization
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Emulsogen TS 200
•
•
Genapol PF 10
•
•
Nonionic emulsifier for emulsion polymerization
EO/PO block copolymer
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
FDA registration n°
Appearance
Active content
Pale yellow wax
100%
FDA approved
•
Special features
Low VOC
•
Product class
APEO free
Acrylate
•
Description
E-PVC
Vinyl Acetate
Name
Styrene/Acrylate
Properties
Butadiene/Styrene latex
Application
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Emulsifier (nonionic)
Emulsogen 4084
Emulsogen EPN 118
Emulsogen EPN 217
Emulsogen EPN 287
Emulsogen EPN 407
Emulsogen LCN 070
Emulsogen LCN 118
Emulsogen LCN 217
Emulsogen LCN 287
Emulsogen LCN 407
Emulsogen PF 20 S
Genapol PF 20
Genapol X 1003
Genapol X 1005
9
Alkyl polyethylene glycol ether
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
Anionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
Nonionic emulsifier for emulsion polymerization
•
•
•
•
•
Genapol PF 40
Genapol X 080
Nonionic emulsifier for emulsion polymerization
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Alkyl polyethylene glycol ether sulfate,
ammonium salt
•
•
Nonionic emulsifier for emulsion polymerization
Arylphenol-polyethylene glycol ether
•
Low-foaming, nonionic surfactant for the chemical industry
EO/PO block copolymer
Low-foaming, nonionic surfactant for the chemical industry
EO/PO block copolymer
Low-foaming, nonionic surfactant for the chemical industry
EO/PO block copolymer
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
•
Chapter 21 § 175.105 / Clear, colourless liquid
§ 176.170 / § 176.180 /
§ 181.30
80%
Improves latex stability
Chapter 21 § 175.105 / Clear, colourless liquid
§ 176.170 / § 176.180 /
§ 181.30
70%
Improves latex stability
Chapter 21 § 175.105 / Clear, colourless liquid
§ 176.170 / § 176.180 /
§ 181.30
70%
Improves latex stability; Chapter 21 § 175.105 / Clear, colourless liquid
open time enhancer
§ 176.170 / § 176.180 /
§ 181.30
70%
Improves latex stability
Chapter 21 § 175.105 / Clear to cloudy liquid
§ 176.170 / § 176.180 /
§ 181.30
100%
Improves latex stability
Chapter 21 § 175.105 / Clear liquid
§ 176.170 / § 176.180 /
§ 181.30
80%
Improves latex stability
Chapter 21 § 175.105 / Clear liquid
§ 176.170 / § 176.180 /
§ 181.30
70%
Improves latex stability
Chapter 21 § 175.105 / Clear liquid
§ 176.170 / § 176.180 /
§ 181.30
70%
Improves latex stability; Chapter 21 § 175.105 / Clear liquid
open time enhancer
§ 176.170 / § 176.180 /
§ 181.30
70%
Yellowish brown liquid
50%
•
Yellowish liquid
100%
•
•
Clear, colorless liquid
100%
•
•
•
Chapter 21 § 181.30 / § Slightly cloudy, colorless 100%
176.200 / § 176.210
liquid
•
•
•
Chapter 21 § 175.105 / Slightly cloudy, colorless 100%
§ 176.180 / §
liquid
176.200 / § 176.210 / §
177.1200
•
•
Chapter 21 § 175.105 / Colourless, slightly
§ 176.170 / § 176.180 / cloudy liquid
§ 181.30
100%
•
•
•
Chapter 21 § 175.105 / Clear, colourless liquid
§ 176.170 / § 176.180 /
§ 181.30
35%
•
•
•
•
Chapter 21 § 175.105 / Clear, colourless liquid
§ 176.170 / § 176.180 /
§ 181.30
50%
Improves latex stability
10
Emulsion polymerization
•
•
•
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
Nonionic emulsifier for emulsion polymerization
Alkyl polyethylene glycol ether
FDA approved
•
Low VOC
•
Product class
APEO free
Acrylate
•
Description
E-PVC
Vinyl Acetate
Name
Styrene/Acrylate
Properties
Butadiene/Styrene latex
Application
•
•
•
•
•
•
Special features
FDA registration n°
Appearance
Active content
Improves latex stability
Chapter 21 § 175.105 / Clear, colourless liquid
§ 176.170 / § 176.180 /
§ 181.30
70%
Improves latex stability
Chapter 21 § 175.105 / Clear, colourless liquid
§ 176.170 / § 176.180 /
§ 181.30
70%
Emulsifier (nonionic)
Genapol X 307
Genapol X 407
11
12
Intermediates for paint additives
Properties
Polyglykol 20000 S
Chemical intermediates
Polyglykol 4000 S
Special features
FDA registration n°
Appearance
Active content
Polyethylene glycol
Flakes
100%
Chemical intermediates
Polyethylene glycol
Flakes
100%
Polyglykol 6000 FL
Chemical intermediates
Polyethylene glycol
Liquid
100%
Polyglykol 6000 PF
Chemical intermediates
Polyethylene glycol
Fine powder
100%
Polyglykol 6000 S
Chemical intermediates
Polyethylene glycol
Flakes
100%
Polyglykol 8000 S
Chemical intermediates
Polyethylene glycol
Flakes
100%
Polyglykol 9000 FL
Chemical intermediates
Polyethylene glycol
Liquid
100%
Polyglykol 9000 S
Chemical intermediates
Polyethylene glycol
Flakes
100%
Polyglykol M 2000 FL
Chemical intermediates
Monomethoxy polyethylene glycol
Liquid
100%
Polyglykol M 2000 S
Chemical intermediates
Monomethoxy polyethylene glycol
Flakes
100%
Polyglykol M 350
Chemical intermediates
Monomethoxy polyethylene glycol
Liquid
100%
Polyglykol M 350 PU
Chemical intermediates
Monomethoxy polyethylene glycol
Liquid
100%
Polyglykol M 500
Chemical intermediates
Monomethoxy polyethylene glycol
Liquid
100%
Polyglykol M 500 PU
Chemical intermediates
Monomethoxy polyethylene glycol
Liquid
100%
Polyglykol M 5000 FL
Chemical intermediates
Monomethoxy polyethylene glycol
Liquid
100%
Polyglykol M 750
Chemical intermediates
Monomethoxy polyethylene glycol
Waxy
100%
Polyglykol M 750 A
Chemical intermediates
Monomethoxy polyethylene glycol
Low sodium content
Waxy
100%
Dipropylene glycol dimethyl
ether
Glyme
Polyalkylene ether
Solvent for polyurethane
dispersions
Colorless liquid
100%
Tetraethylene glycol dimethyl
ether
Glyme
Polyalkylene ether
Solvent for coatings
Liquid
100%
FDA approved
Product class
Low VOC
Description
APEO free
Name
Intermediate
Low sodium content
Low sodium content
Solvent
Pigment preparations
•
Special features
•
•
FDA registration n°
Appearance
Active content
Powder
100%
FDA approved
•
Product class
Low VOC
Carbon black
•
Description
APEO free
Inorganic pigment
Name
Properties
Organic pigment
Application
Biocide
JMAC Composite PG
13
Versatile biocide based on silver chloride onto titanium dioxide Silver Biocide
Excellent temperature and
pH stability
14
Pigment preparations
•
•
•
•
•
Special features
APEO free
Product class
FDA registration n°
Appearance
Active content
Excellent temperature and
pH stability
Liquid / Dispersion
10%
Excellent temperature and
pH stability
Powder
100%
Solution
9.5%
Excellent temperature and
pH stability
Liquid
20%
FDA approved
Carbon black
•
Description
Low VOC
Inorganic pigment
Name
Properties
Organic pigment
Application
Biocide
JMAC LP 10
JMAC S 10
Nipacide BIT 10 W
Nipacide BIT 20
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Nipacide CI
•
•
Nipacide CI 15
•
Nipacide CI 15 MV
Nipacide BIT AS 20
Nipacide BK
Nipacide BSM
Versatile biocide based on silver chloride onto titanium dioxide Silver Biocide
Versatile biocide based on silver chloride onto titanium dioxide Silver Biocide
•
•
In-can biocide based on BIT
Isothiazolinone
In-can biocide based on BIT
Isothiazolinone
In-can biocide based on BIT
Isothiazolinone
Excellent temperature and
pH stability
Liquid / Dispersion
20%
In-can biocide based on Hexahydrotriazine (HHT)
Formaldehyde releaser
Provides head-space
protection
Liquid
75%
In-can biocide based on BIT/MIT
Mixture of isothiazolinones
In-can biocide based on BIT/MIT
Mixture of isothiazolinones
In-can biocide based on CMIT/MIT + EDDM
Mixture of isothiazolinones and
formaldehyde releaser
In-can biocide based on CMIT/MIT + EDDM
•
•
•
•
•
Good temperature and pH
stability
Liquid
5%
•
•
Good temperature and pH
stability
Yellow liquid
10%
•
Provides head-space
protection
Solution
Mixture of isothiazolinones and
formaldehyde releaser
•
Provides head-space
protection
Liquid
23%
In-can biocide based on CMIT/MIT + EDDM
Mixture of isothiazolinones and
formaldehyde releaser
•
Provides head-space
protection
Solution
35%
•
In-can biocide based on CMIT/MIT
Isothiazolinone
•
•
Concentrated biocide
Liquid
14%
•
•
In-can biocide based on CMIT/MIT
Isothiazolinone
•
•
Broad spectrum activity
Liquid
1.50%
•
•
•
In-can biocide based on CMIT/MIT
Isothiazolinone
•
•
Broad spectrum activity
Solution
1.5%
•
•
•
In-can biocide based on EDDM
Formaldehyde releaser
Provides hHead-space
protection
Liquid
99%
•
•
•
In-can biocide based on CMIT/MIT +Bronopol
Mixture of isothiazolinones and halogen
active biocide
Broad spectrum activity
Solution
11%
Nipacide IPBC 30
•
•
•
Dry-film and in-can biocide based on IPBC
Carbamate
Broad spectrum fungicide
Liquid
30%
Nipacide KBS
•
•
•
In-can biocide based isothiazolinone and bronopol
Mixture of organic biocides
Liquid
15%
Nipacide PZI
•
•
Dry-film biocide based on zinc-pyrithione and IPBC
Mixture of pyrithione and carbamate
Carbendazim & diuron-free
Liquid / dispersion
25%
Nipacide PZT
•
•
Dry-film biocide based on zinc-pyrithione and s-triazine
Mixture of pyrithione and s-triazine
Carbendazim & diuron free
Liquid / dispersion
25%
•
•
In-can biocide based on isothiazolinone and formaldehyde
donor biocide
Mixture of organic biocides
Liquid
60%
Polymeric dispersing agent for organic pigments
Novoloac derivative
Anionic
Yellowish viscous or pasty
liquid
35%
Polymeric dispersing agent for organic pigments
Novoloac derivative
Nonionic
Yellowish to brownish,
viscous liquid
100%
•
Anionic
Brownish, clear liquid
30%
•
Anionic
Brownish, turbid liquid
80%
Nipacide BSM2
Nipacide CFX 2
Nipacide CFX 3
Nipacide CFX 4
Nipacide FC
Nipacide IB
Nipacide TBXB
•
•
•
Dispersing agent
Dispersogen 1728
•
•
•
•
Dispersogen 3169
•
•
Polymeric dispersing agent for organic pigments
Novoloac derivative
Dispersogen 4387
•
•
Anionic dispersing agent
Surfactant based dispersing agent
Dispersogen 2774
15
•
•
•
•
16
Pigment preparations
•
•
•
•
Dispersing agent for universal colorants
Blend of dispersing agents
Anionic dispersing agent
Surfactant based dispersing agent
Dispersing agent for inorganic pigments
Surfactant based dispersing agent
Dispersing agent for inorganic pigments
Blend of dispersing agents
Special features
FDA registration n°
Appearance
Active content
FDA approved
•
Product class
Low VOC
Carbon black
•
Description
APEO free
Inorganic pigment
Name
Properties
Organic pigment
Application
•
•
3-in-1 product for inorganic
pigments
Yellowish, cloudy, viscous
liquid
85%
•
•
Suitable for universal
pigment pastes
Clear, yellowish liquid
30%
•
•
Inorganic pigments with
negative zeta potentials
Liquid
90%
•
•
Inorganic pigments with
negative zeta potentials
Clear, yellowish liquid
100%
Dispersing agent
Dispersogen AN 100
Dispersogen ECS
Dispersogen FA
•
Dispersogen FSE
•
Dispersogen LFH
•
•
Dispersing agent for pigments
Surfactant based dispersing agent
•
•
Phosphate ester
Brownish, viscous liquid
100%
Dispersogen LFS
•
•
Dispersing agent for pigments
Surfactant based dispersing agent
•
•
Phosphate ester, neutralized
Brownish, viscous liquid
100%
Polymeric dispersing agent for inorganic pigments
Polycarboxylate ether
•
•
Highly effective for inorganic
nano-pigments
Yellowish, turbid liquid
100%
Synergist for inorganic pigments
Amine derivative
•
•
Reduces viscosity of
inorganic pigment
preparations
Yellow to brownish, viscous
liquid
30%
•
Dispersing agent for organic pigments
Surfactant based dispersing agent
•
•
Nonionic
Yellowish clear liquid
90%
•
Mixture of nonionic wetting and dispersing agents
Blend of dispersing agents
•
•
Nonionic
Yellowish, cloudy liquid
100%
Nonionic dispersing agent for organic pigment
Alkyl polyethylene glycol ether
Clear liquid
70%
•
•
Dispersogen PCE
•
Dispersogen PSM
•
Dispersogen PTS
•
Dispersogen UDN
•
•
Emulsogen LCN 217
•
Genamin CC 100
•
Genamin TA 100
Genapol X 1003
Genapol X 1005
•
•
•
•
•
Hostapal BV conc.
•
Hostaphat MDAH
•
•
Chapter 21 § 175.105 / §
176.170 / § 176.180 / §
181.30
Synergist for inorganic pigments
Fatty amine
Reduces viscosity of
inorganic pigment
preparations
Yellow to brownish, viscous
liquid
30%
Synergist for inorganic pigments
Fatty amine
Reduces viscosity of
inorganic pigment
preparations
Yellow to brownish wax
30%
Dispersing agent for organic pigments
Alkyl polyethylene glycol ether
Dispersing agent for organic pigments
Alkyl polyethylene glycol ether
Dispersing agent for pigments
Tributyl phenol polyethylene glycol ether
sulfate, sodium salt
•
•
Improves latex stability
•
•
•
•
•
•
•
•
Anionic wetting and dispersing agent
Alkyl phosphoric acid mono / diester, acid
form
•
Improves latex stability
Chapter 21 § 175.105 / §
176.170 / § 176.180 / §
181.30
Clear, colourless liquid
35%
Dispersing agent for PR 122
Chapter 21 § 175.105 / §
176.170 / § 176.180 / §
181.30
Clear, colourless liquid
50%
Provides good particle sizecontrol and prevents particle
coagulation
Colourless to yellowish paste 51%
Dispersing agent for ball
point pens
Clear, yellowish liquid
100%
Humectant
Polyglykol 200 USP
•
•
•
Humectant for pigment preparations
Glycerol ethoxylate
•
•
For low VOC-levels
Liquid
100%
Polyglykol 300
•
•
•
Humectant for pigment preparations
Polyethylene glycol
•
•
For low VOC-levels
Liquid
100%
Polyglykol 400
•
•
•
Humectant for pigment preparations
Polyethylene glycol
•
•
For low VOC-levels
Liquid
100%
Polyglykol G 300
•
•
•
Humectant for pigment preparations
Glycerol ethoxylate
•
•
For low VOC-levels
Liquid
100%
Triethylene glycol
•
•
•
Humectant for pigment preparations
Trietheylene glycol ether
•
•
For low VOC-levels
Liquid
100%
17
18
Industrial & Consumer Specialties
PAINTS AND
COATINGS
CLARIANT INTERNATIONAL LTD
Clariant International Ltd.
Industrial & Consumer Specialties
Global Marketing Paints & Coatings
4132 Muttenz
Switzerland
Phone +41 61 469 7612
Clariant Produkte (Deutschland) GmbH
Industrial & Consumer Specialties
Global Marketing Paints & Coatings
65926 Frankfurt am Main
Germany
Phone +49 69 305 6308
Internet
http://www.clariant.com
http://www.paints-coatings.clariant.com
E-Mail
[email protected]
© Copyright 2012 The Clariant Corporation
This information corresponds to the present state
of our knowledge and is intended as a general
description of our products and their possible
applications. Clariant makes no warranties, express
or implied, as to the information’s accuracy,
adequacy, sufficiency or freedom from defect
and assumes no liability in connection with any
use of this information. Any user of this product
is responsible for determining the suitability of
Clariant’s products for its particular application.
Nothing included in this information waives any of
Clariant’s General Terms and Conditions of Sale,
which control unless it agrees otherwise in writing.
Any existing intellectual/industrial property rights
must be observed. Due to possible changes in our
products and applicable national and international
regulations and laws, the status of our products
could change. Material Safety Data Sheets providing
safety precautions, that should be observed when
handling or storing Clariant products, are available
upon request and are provided in compliance with
applicable law. You should obtain and review the
applicable Material Safety Data Sheet information
before handling any of these products. For
additional information, please contact Clariant.
For sales to customers located within the
United States and Canada the following
applies in addition NO EXPRESS OR
IMPLIED WARRANTY IS MADE OF THE
MERCHANTABILITY, SUITABILITY,
FITNESS FOR A PARTICULAR PURPOSE
OR OTHERWISE OF ANY PRODUCT OR
SERVICE.
®
Product and service marks protected by Clariant in many countries
TM Trademark at introductory stage
© 2010 Clariant International Ltd,
Rothausstrasse 61, 4132 Muttenz, Switzerland