Relay Specialties, Inc.
Transcription
Relay Specialties, Inc.
Relays FUJITSU TAKAMISAWA AMERICA, INC. Signal Printed Circuit Board Relays FTR-B3 RELAY FTR-B4 RELAY L - 10.6 mm W - 7.2 mm H - 5.45mm L - 10.6 mm W - 5.7 mm H - 9.3 mm CONTACT DATA Arrangement - 2 form C Material -Gold-overlay silver-alloy Type - Bifurcated Resistance (initial)-Maximum 75mΩ (at1 A 6VDC) Ratings (resistive) - 1 A 30 VAC or 0.3A 125VDC Max.Carrying Current:1 A Max.Switching Power: 62.5 VA or 30W Max.Switching Voltage:250 VAC or 220 VDC Max.Switching Current: 2 A Min.Switching Load:0.01mA 10m VDC Life Expectancy - Mechanical:50 x 10 6 ops. min. (standard type), 20 x 10 6 ops. min. (latching type) Electrical:100 x 103 ops. min.(at 1A 30VDC at 0.5Hz), 100 x 10 3 ops. min.(at 0.3A 125VDC at 0.5Hz) COIL DATA Voltage (at 20˚C) - 1.5 to 12VDC Power (at 20˚C) - 0.14 W (non-latch), 0.100W (latch) Operate Power (at 20˚C) - 0.078 W (non-latch), 0.056W (latch) GENERAL DATA Insulation Resistance - Min.1,000 MΩ (at 500 VDC) Dielectric Strength - 1,000 VAC 1min.(between open contacts) 1,500 VAC 1min.(coil and contacts) Surge Strength - 1,500 V (at 10 x160µs) [FCCPart 68](between open contacts) 2,500 V (at 2 x 10µs) [Bellcore](coil and contacts) Temperature Range - -40˚C to +85˚C Time Value - Operate:3 msec./ Release:3 msec. Weight - Approx.0.8g Enclosure - LCP UL, 950, EN60950, IEC60950 Meet spacing basic insulation 1500 working voltage, pollution degree2. CONTACT DATA Arrangement - 2 form C Material -Gold-overlay silver-alloy Type - Bifurcated Resistance (initial)-Maximum 100mΩ (at1 A 6VDC) Ratings (resistive) - Max.Switching Power: 62.5 VA or 30W Max.Switching Voltage:250 VAC Max.Switching Current: 1 A Life Expectancy - Mechanical:50 x 106 ops. min.(at 3Hz) Electrical: 100 x 10 3 ops. min. (at 1A 30VDC at 0.5Hz), 100 x 10 3 ops. min.(at 0.3A 125VDC at 0.5Hz) COIL DATA Voltage (at 20˚C) - 1.5m to 12 V Power (at 20˚C) - 0.14 W(non-latch), 0.100 W (latch) Operate Power (at 20˚C) - 0.078 W (non-latch).0.056W (latch) GENERAL DATA Insulation Resistance - Min.1,000 MΩ (at 500 VDC) Dielectric Strength - 1,000 VAC 1min.(between open contacts) 1,500 VAC 1min.(coil and contacts) Surge Strength - 1,500 V (at 10 x160µs) [FCCPart 68](between open contacts) 1,500 V (at 10 x160µs) [FCCPart 68]2,500 V (at 2 x 10µs) [Bellcore](coil and contacts) Temperature Range - -40˚C to +85˚C Time Value - Operate:3 msec./ Release:3 msec. Weight - Approx.1.0 g Enclosure - LCP UL, 950, EN60950, IEC60950 Meet spacing basic insulation 1500 working voltage, pollution degree2. Standard Nominal Voltage Coil Resistance (±10%) Must Operate Voltage (VDC at 20˚C) Must Release Voltage (VDC at 20˚C) Nominal Power (mW, ±10%at 20˚C) Ordering Code 1.5 16.1Ω 1.13 0.15 140 FTR-B4 CA1.5Z Standard Coil Resistance (±10%) Must Operate Voltage (VDC at 20˚C) Must Release Voltage (VDC at 20˚C) Nominal Power (mW, ±10%at 20˚C) Ordering Code 1.5 16.1Ω 1.13 0.15 140 FTR-B3(G)A1.5Z 3 64.3 Ω 2.25 0.3 140 FTR-B3(G)A003Z 4.5 145 Ω 3.38 0.45 140 FTR-B3(G)A4.5Z 12 1,028 Ω 9.0 1.2 140 FTR-B3(G)A012Z Nominal Voltage Latching Type 1.5 508 22.5 Ω 1.13 -0.13 100 FTR-B3(G)B1.5Z 3 90 Ω 2.25 -2.25 100 FTR-B3(G)B003Z 4.5 203 Ω 3.38 -3.38 100 FTR-B3(G)B4.5Z 12 1,440 Ω 9.0 -9.0 100 FTR-B3(G)B012Z www.relayspec.com 3 64.3 Ω 2.25 0.3 140 FTR-B4 CA3Z 4.5 145 Ω 3.38 0.45 140 FTR-B4 CA4.5Z 12 1,028 Ω 9.0 1.2 140 FTR-B4 CA12Z Latching Type 1.5 22.5 Ω 1.13 0.13 100 FTR-B4 CB1.5Z 3 90 Ω 2.25 2.25 100 FTR-B4 CB003Z 4.5 203 Ω 3.38 3.38 100 FTR-B4 CB4.5Z 12 1,440 Ω 9.0 9.0 100 FTR-B4 CB012Z [email protected] Relays FUJITSU TAKAMISAWA AMERICA, INC. Signal Printed Circuit Board Relays Double Winding Latching RAL-D ( ) W-K Type RA / RA4 RELAY RA: 1 Amp DPDT, RA4: 1 Amp 4PDT L - RA: 0.795”, RA4:1.387” W - RA:0.394”, RA4:0.394” H - 0.394”, RA4:0.394” CONTACT DATA Arrangement - 2 form C (DPDT), 4 form C (4PDT) Material - Gold overlay silver palladium alloy vs. silver palladium alloy Type - Bifurcated Resistance (initial) -Maximum 100 mΩ Rating (resistive) - 24 VDC 1 A or 120 VAC 0.5 A Life Expectancy - Mechanical:2 x 107 ops. min. Electrical: 2 x 10 5 ops. min. (0.5 A 120 VAC) 2 x 10 5 ops. min. (1 A 24 VAC) Maximum Carrying Current: 2 A COIL DATA Voltage (at 20˚C) - 1.5 to 48 VDC Power (at 20˚C) - Operate:Standard: 67 to 90 mW Single winding latching: 35 to 100 mW Double winding latching: 75 to 180 mW Nominal:Standard: 150 to 200 mW Single winding latching: 75 to 200 mW Double winding latching: 150 to 200 mW Operate (at 20˚C) - Less than 70% of nominal voltage GENERAL DATA Insulation Resistance - 1000MΩ at 500 VDC (expect between P & S coil) Dielectric Strength - 1000 VAC (between open contacts) 1500 VAC (beween all other conductors) (expect between P & S coil) Surge Strength - 1500 V between coil and contact, adjacent contacts Temperature Range - -40˚C to +80˚C Time Value - Operate: RA, RA4:6 msec. Release: RA, RA4:4 msec.;RAL, RA4L:6msec. Enclosure - PBT nominal voltage Vibration Resistance -RA:30 G, RA4: 20 G (10 to 55 Hz) Unerror 30 G, RA4:30 G, (10 to 55 Hz) Destruction Shock Resistance -RA: 50 G, RA4:30 G, (11 ±1 mS) Unerror 100 G, RA4:100 G, (11±1 mS) Destruction Weight - Approx.RA: 3.7 g;RA4: 6.4 g Enclosure - PBT Nominal Voltage Coil Resistance (±10%) Must Operate Voltage (VDC at 20˚C) Must Release Voltage (VDC at 20˚C) P/S 15 Ω 1.0 0.15 RA 1.5W-K 60 Ω 2.0 0.3 RA 3W-K 4.5 135 Ω 3.1 0.45 RA 4.5W-K 5 167 Ω 3.4 0.5 RA 5W-K 6 240 Ω 4.0 0.6 RA 6W-K 9 540 Ω 6.1 0.9 RA 9W-K 12 960 Ω 8.1 1.2 RA 12W-K 18 2, 160 Ω 12.3 1.8 RA 18W-K 24 2, 880 Ω 16.1 2.4 RA 24W-K 48 11, 520 Ω 32.2 4.8 RA 48W-K -1.0 RAL 1.5W-K Single Winding Latching RAL ( ) W-K Type 1.5 510 30 Ω 1.0 Ordering Code 15 Ω 1.0 1.0 RAL D1.5W-K 3 P/S 60 Ω 2.0 2.0 RAL D3W-K P/S 135 Ω 3.1 3.1 RAL D4.5W-K 5 P/S 167 Ω 3.4 3.4 RAL D5W-K 6 P/S 240 Ω 4.0 4.0 RAL D6W-K 9 P/S 540 Ω 6.1 6.1 RAL D9W-K 12 P/S 960 Ω 8.1 8.1 RAL D12W-K 18 P/S 2,160 Ω 12.3 12.3 RAL D18W-K 24 P/S 2,880 Ω 16.1 16.1 RAL D24W-K 48 P/S 11,520 Ω 32.2 32.2 RAL D48W-K Standard RA4 ( ) W-K Type 1.5 11 Ω 1.0 0.15 RA4 1.5W-K 3 45 Ω 2.1 0.3 RA4 3W-K 4.5 101 Ω 3.1 0.45 RA4 4.5W-K 5 125 Ω 3.5 0.5 RA4 5W-K 6 180 Ω 4.2 0.6 RA4 6W-K 9 405 Ω 6.3 0.9 RA4 9W-K 12 720 Ω 8.4 1.2 RA4 12W-K 18 1,620 Ω 12.6 1.8 RA4 18W-K 24 2,880 Ω 16.8 2.4 RA4 24W-K 48 11,520 Ω 33.6 4.8 RA4 48W-K Single Winding Latching Type RA4L ( ) W-K Type 1.5 25Ω 1.0 -1.0 RA4L 1.5W-K 3 100 Ω 2.1 -2.1 RA4L 3W-K 4.5 225 Ω 3.1 -3.1 RA4L 4.5W-K 5 278 Ω 3.5 -3.5 RA4L 5W-K 6 400 Ω 4.2 -4.2 RA4L 6W-K 9 900 Ω 6.3 -6.3 RA4L 9W-K 12 1,600 Ω 8.4 -8.4 RA4L 12W-K 18 3,600 Ω 12.6 -12.6 RA4L 18W-K 24 6,400 Ω 16.8 -16.8 RA4L 24W-K 48 25,600 Ω 33,6 -33,6 RA4L 48W-K Standard 3 Reset Voltage (VDC at 20˚C) 4.5 Ordering Code 1.5 Must Operate Voltage (VDC at 20˚C) Standard 1.5 Non-Latching RA ( ) W-K Type Nominal Voltage Coil Resistance (±10%) DoubleWinding Latching Type RA4L-D ( ) W-K Type 1.5 P/S 12.5 Ω 1.0 1.0 3 P/S 50 Ω 2.1 2.1 RA4L D3W-K P/S 113 Ω 3.1 3.1 RA4L D4.5W-K RA4L D1.5W-K 3 120 Ω 2.1 -2.1 RAL 3W-K 4.5 4.5 270 Ω 3.1 -3.1 RAL 4.5W-K 5 P/S 139 Ω 3.5 3.5 RA4L D5W-K 5 335 Ω 3.4 -3.4 RAL 5W-K 6 P/S 200 Ω 4.2 4.2 RA4L D6W-K 6 480 Ω 4.1 -4.1 RAL 6W-K 9 P/S 450 Ω 6.3 6.3 RA4L D9W-K 9 1,080 Ω 6.3 -6.3 RAL 9W-K 12 P/S 800 Ω 8.4 8.4 RA4L D12W-K 12 1,920 Ω 8.3 -8.3 RAL 12W-K 18 4,320 Ω 12.5 -12.5 RAL 18W-K 18 P/S 1,800 Ω 12.6 12.6 RA4L D18W-K 24 5,760 Ω 16.6 -16.6 RAL 24W-K 24 P/S 3,200 Ω 16.8 16.8 RA4L D24W-K 48 11,520 Ω 21.0 -21.0 RAL 48W-K 48 P/S 12,800 Ω 33,6 33,6 RA4L D48W-K www.relayspec.com [email protected] Relays FUJITSU TAKAMISAWA AMERICA, INC. Power Printed Circuit Board Relays FTR-F1/H1K1 RELAY FTR-F2/H2/K2 RELAY 5,10, 16 Amp SPST-NO, SPDT L - 1.102 “ W - 0.504” H - 0.650” 5, 10, 16 Amp SPST-NO L - 0.945” W - 0.433” H - 0.984” CONTACT DATA Arrangement - F1: 2 form A, C; H1/K1:1 form A, C Material -Gold plate silver alloy Type - Single Resistance (initial)- Maximum 100mΩ (at 1 A 6 VDC), K1:277VA/300VDC Ratings (resistive) -F1: 5 A 250 VAC/24VDC/ H1:10A 250VDC/30VDC Max.Carrying Current: F1:7A, H1: 14A , K1:16A Max.Switching Power: F1: 1,250 VA/ 120W H1:2,500 VA/ 300W, K1:4000VA/480W Max.Switching Voltage:F1: 400 VAC/ 300 VDC H1:380 VAC/ 300VDC, K1:400 VAC/ 300VDC Max.Switching Current: F1:5 A, H1:10 A, K1:16A Max.Switching Load:10 mA 5VDC Life Expectancy - Mechanical:2x 107 ops. min. CONTACT DATA Arrangement - 1 form A (SPST-NO) Material -Silver-alloy Type - Single Resistance (initial)- Maximum 100mΩ (at 1 A 6 VDC) Ratings (resistive) -F2: 250VAC/30VDC, 5A, H2: 250VAC/30VDC,10A K2:250VAC/30VDC, 16A Max.Carrying Current:F2:5A, H2: 10A, K2:16A Max.Switching Power: F2:1250 VA/150W, H2: 2500 VA/300W, K2: 4000VA/480W Max.Switching Voltage:400 VAC /300 VDC Max.Switching Current: F2:5A, H2:10A, K2:16A Life Expectancy - Mechanical: 2 x 10 6 ops. min. Electrical:1x105 ops. mi.(Standard and sensitive types) 2.5 x 10 4 ops. min.(TV3/5 rating type) COIL DATA Voltage (at 20˚C) - 5 to 48 VDC Power (at 20˚C) - 0.53 W Standard, 0.4W Sensitive Operate Power (at 20˚C) - 0.26W Standard, 0.23W Sensitive GENERAL DATA Insulation Resistance - 1000 MΩ Dielectric Strength - 1,000 VAC 1min.(between open contacts) 5,000 VAC 1min.(coil and contacts) Surge Strength - 10,000 V (at 1.2 x 50µs) Temperature Range - -40˚C to +75˚C Time Value - Operate: F1:15 msec., H1: 10msec., K1:20msec. Release:5 msec.(F1/H1 at nominal voltage), K1:10msec. Weight - Approx.12 g Enclosure - PBT Electrical:100x103 ops. min.(contact rating) 25 x 10 3 ops. min. (lamp load) COIL DATA Voltage (at 20˚C) - 5 to 48VDC Power (at 20˚C) - 0.53W Operate Power (at 20˚C) - 0.26W GENERAL DATA Insulation Resistance - Min.1,000MΩ Dielectric Strength - 1,000 VAC 1min.(between open contacts) 4,000 VAC 1min.(coil and contacts) Surge Strength - 10,000 V (at 1.2 x 50 Ωµs) Temperature Range - -40˚C to +70˚C Time Value - Operate: 15 msec./ Release:5 msec.(at nominal voltage) Weight - Approx.12 g Enclosure - PBT Standard Type (530mW) Standard Type ** Insert F1, H1, or K1 Nominal Voltage Nominal Voltage Coil Resistance (±10%) Must Operate Voltage (VDC at 20˚C) Ordering Code Must Release Voltage (VDC at 20˚C) Standard 47 Ω 5 3.5 0.5 FTR-** (C,A)A005V TV- Rating Type FTR-** AA005T 6 68 Ω 4.2 0.6 FTR-** (C,A)A006V FTR-** AA006T 9 15 Ω 66.3 0.9 FTR-** (C,A)A009V FTR-** AA009T 12 270 Ω 8.4 1.2 FTR-** (C,A)A012V FTR-** AA012T 24 1,100 Ω 16.8 2.4 FTR-** (C,A)A024V FTR-** AA024T 48 4,400 Ω 33.6 4.8 FTR-** (C,A)A048V FTR-** AA048T Sensitive Type ** Insert F1, H1, or K1 62 Ω 5 90 Ω 6 516 3.75 4.5 Coil Resistance (±10%) 0.5 0.6 FTR-** (C,A) D005V FTR-** (C,A) D006V 9 202 Ω 6.75 0.9 FTR-** (C,A) D009V 12 360 Ω 9.0 1.2 FTR-** (C,A) D012V 24 1,440 Ω 18.0 2.4 FTR-** (C,A) D024V 48 5,760Ω 36.0 4.8 FTR-** (C,A) D048V www.relayspec.com Must Operate Voltage (VDC at 20˚C) Must Release Voltage (VDC at 20˚C) Ordering Code TV-3 Rating 5A Type TV-5 Rating 10A Type TV-8 Rating 16A Type 5 47 Ω 3.5 0.5 FTR-F2AK005T FTR-H2AK005T FTR-K2AK005T 6 68 Ω 4.2 0.6 FTR-F2AK006T FTR-H2AK006T FTR-K2AK006T 9 155 Ω 6.3 0.9 FTR-F2AK009T FTR-H2AK009T FTR-K2AK009T 12 270 Ω 8.4 1.2 FTR-F2AK012T FTR-H2AK012T FTR-K2AK012T 24 1,200 Ω 16.8 2.4 FTR-F2AK024T FTR-H2AK024T FTR-K2AK024T 48 4,400 Ω 33.6 4.8 FTR-F2AK048T FTR-H2AK048T FTR-K2AK048T Sensitive Type (250mW) 5 100Ω 4.0 0.25 FTR-F2AL005T FTR-H2AL005T 6 145 Ω 4.8 0.30 FTR-F2AL006T FTR-H2AL006T 9 325 Ω 7.2 0.45 FTR-F2AL009T FTR-H2AL009T 12 575 Ω 9.6 0.60 FTR-F2AL012T FTR-H2AL012T 24 2,310 Ω 19.2 1.20 FTR-F2AL024T FTR-H2AL024T [email protected] Relays FUJITSU TAKAMISAWA AMERICA, INC. Automotive Printed Circuit Board Relays FBR-51/52 RELAY FBR-512/522 RELAY 7 25 Amp L - 15.5 mm W - 12.1 mm H - 13.7 mm 25 Amp L - 24.0 mm W - 16.2 mm H - 14.1 mm CONTACT DATA Arrangement - 1 form C (SPDT) Material -Silver-tin oxide indium Type - Single Voltage Drop (Resistance) -Maximum 100 mΩ (at 2 A 12VDC) Ratings (resistive) -14 VDC 20 A (W, W1 type), 14 VDC inrush 20A, break 4 A (motor free load) (N type) Max.Carrying Current:35 A / 10 min., 25 A 1hr (25˚C, 100% rated coil voltage) Max.Inrush Current:60 A (W, W1 type), 40 A (N type) Max.Switching Current:35 A 16 VDC Min.Switching Load:1A 6 VDC Life Expectancy - Mechanical:10 x 10 6 ops. min. CONTACT DATA Arrangement - 1 form C x 2(SPDT x 2) Twin Material -Silver-tin oxide indium Type - Single Voltage Drop (Resistance) - Maximum 100 mV (at 2 A 12VDC) Ratings (resistive) -14 VDC 20 A (W), 14 VDC 25A (W1) Max.Carrying Current:35 A / 10 min., 25 A 1hr (25˚C, 100% rated coil voltage) Max.Inrush Current:60 A Max.Switching Current: 35 A 16 VDC Min.Switching Load:1A 6 VDC Life Expectancy - Mechanical:1 x 107 ops. min. Electrical:W:2 x 105 ops. min.(14VDC 20 A, Electrical:W:2 x 105 ops. min.(14VDC 20 A, locked motor load), W1:2 x 105 ops. min. (14VDC 25 A, locked motor load) COIL DATA Voltage (at 20˚C) - 9, 10, 12 VDC Power (at 20˚C) - 600 mW Operate Power (at 20˚C) - 220 mW locked motor load), W1:2 x 105 ops. min. (14VDC 25 A, locked motor load) R E L A Y S COIL DATA Voltage (at 20˚C) - 9, 10, 12 VDC Power (at 20˚C) - 600 mW Operate Power (at 20˚C) - 220 mW GENERAL DATA Temperature Range - -40˚C to +85˚C Time Value - Operate: 10 msec./ Release:5 msec. Weight - Approx.13 g Enclosure - Plastic sealed type GENERAL DATA Temperature Range - -40˚C to +85˚C Time Value - Operate:10 msec. / Release:5 msec. Weight - Approx.6 g Enclosure - Plastic sealed type FBR 512 Series FBR 51 Series Nominal Voltage Coil Resistance (±10%) Must Operate Voltage (VDC at 20˚C) Thermal Resistance Ordering Code Nominal Voltage Coil Resistance (±10%) Must Operate Voltage (VDC at 20˚C) 135 Ω 5.4 W contact W1 Ccntact 9 FBR51ND09-W FBR51ND09-W1 10 180 Ω 6.3 FBR51ND10-W FBR51ND10-W1 12 240 Ω 7.3 Thermal Resistance Ordering Code W contact W1 Ccntact FBR512ND09-W FBR512ND09-W1 FBR512ND10-W FBR512ND10-W1 FBR512ND12-W FBR512ND12-W1 9 135 Ω 5.4 10 180 Ω 6.3 12 240 Ω 7.3 FBR51ND12-W FBR51ND12-W1 9 100 Ω 5.4 FBR522ND09-W FBR522ND09-W1 9 100 Ω 5.4 FBR52ND09-W FBR52ND09-W1 10 135 Ω 6.3 FBR522ND10-W FBR522ND10-W1 10 135 Ω 6.3 FBR52ND10-W FBR52ND10-W1 12 180 Ω 7.3 FBR52ND12-W FBR522ND12-W1 12 280 Ω 7.3 FBR52ND12-W FBR52ND12-W1 73˚C/W FBR 52 Series 65˚C/W Toll Free 1-800-526-5376 73˚C/W FBR 522 Series 201-337-1000 65˚C/W Fax 201-337-1862 517