Low Res - 7Mb - SI Distributing

Transcription

2016 Catalog
Successful Innovations for
Agriculture Since 1979
800.368.7773
www.sidist.com
www.sidist.com
VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING
1
2016 Catalog
New Products!
MUDSMITH GAUGE
WHEEL TIRES
Gauge Wheels Re-Invented!
The MudSmith Gauge Wheel was created
on the Smith family farm in northeastern
South Dakota in an effort to improve planting
efficie y during wet soil conditions. The Smiths
began no-tilling in the early 1990’s, and the combination of no-till
and living in the prairie pot hole region caused wheel plugging
that caused delays, repairs and stress.
After trying different designs they progressed to the 3 spoke
wheel. This wheel has proven to be the most plug-free design
available in addition to offering outstanding durability.
More on page 32
Automate Your Sliding Shed Doors!
More on page 76-77
SWIFT TAILLIGHTS
SCH EASY CUT II
Now Available for John
Deere Flex Draper
Platforms!
Portable Wireless
Remote Control Taillights!
• Farm Trailers & Hay Trailers
• RV’s & Campers
• Horse Trailers
• Construction Equipment
More on pages 52-66
OEM REPLACEMENT
PARALLEL ARMS
Available for John Deere
MaxEmerge2, Plus, Pro, XP, XP Pro, 5, ExactEmerge
1530, 1535 with MaxEmerge row units
More on page 28
• Boat Trailers with Damaged Wiring
• Just-In-Case Emergency Lighting
• Utility Trailers
• Flashlight Mode Lighting
More on page 72
RADURA OEM REPLACEMENT
KNIFE ASSEMBLIES
Now Available for John
Deere Flex Draper
Platforms!
More on page 70
TABLE OF CONTENTS
Planting Products................................................2-41
Harvesting Products........................................ 42-71
Other Products.................................................. 72-78
S.I. Distributing Show Schedule.......................... 79
Acra-Plant Blu-Jet Parts........................................................... 40
Acra-Plant Conservation Ripper Points............................. 41
Acra-Plant Fertilizer Knives.................................................... 40
Acra-Plant Inserts & V-Shots.................................... 38
Acra-Plant Notched Disc Openers....................................... 39
Acra-Plant Quick Change Fertilizer Knives....................... 41
Acre Plus Seed Box Topper..................................................... 34
Air Design Drill Scrapers......................................................... 34
Air Design Planter Scrapers................................................... 34
Boule Cristal Strobe Light....................................................... 72
Bullseye Seed Tube................................................................... 19
Burvee Bubble-Up Auger....................................................... 48
Case-IH Replacement Cutting Parts.............................70-71
CleanSweep................................................................................. 12
Closing Wheels........................................................................... 27
Closing Wheel Brackets........................................................... 26
Depth-A-Matic............................................................................ 13
Down Pressure Spring Package........................................... 28
Gauge Wheel Arms................................................................... 31
Gauge Wheel Assemblies.......................................................30
Gauge Wheel Cover.................................................................. 31
Gauge Wheel Tires.................................................... 30
HCC Field Tracker...................................................... 44
HCC Flip Reel Kit........................................................................ 48
HCC Gateway Sieves & Chaffers........................................... 45
HCC Orbit Trac II Reel Kit......................................................... 46
HCC Complete Orbit Trac II Reel........................................... 47
HCC Paddle Tines....................................................................... 43
HCC Replacement Reel Tines................................................ 43
HCC Smart Till Replacement Parts....................................... 72
Insecticide Skirt.......................................................................... 37
John Deere Replacement Cutting Parts......................70-71
John Deere Seed Boots........................................................... 25
John Deere Stabilizer Kit......................................................... 69
Keeton Seed Firmers...............................................................2-4
Kinze Brush Meter Adapter.................................................... 36
Leatherman Tools...................................................................... 73
Lockease Hitch Pin.................................................................... 36
M3 Monitor System.................................................................. 35
MagnoJet Spray Nozzles......................................................... 50
Martin Planting Attachments........................................... 6-11
May Wes Products..................................................... 49
Bold Type indicates New Products for 2016
Mojo Wire........................................................................................5
Montezuma Toolboxes............................................................ 78
Mudsmith Guage Wheel Tires..................................32
Mur-Lok Fittings............................................................................5
Needham Ag V8 Firming Wheel........................................... 33
NH3 Disc Sealer.......................................................................... 33
One Wrench................................................................................. 25
Parallel Arms............................................................. 28
Parallel Linkage Rebuild Kits................................................. 28
Planter Replacement Parts..................................................... 29
Plastic Wear Blocks.................................................................... 42
Postboxx Mailbox...................................................................... 73
Precision Meter.......................................................................... 16
Precision Meter Parts............................................................... 17
Precision Planting eSet......................................................14-15
Propel Sliding Door Automation........................76-77
Quick Crank Trash Whipper Adjuster.................................. 13
Quick Finger................................................................................ 42
Radura Disc Mower Blades..................................................... 51
Radura Guards & Sections...................................................... 71
Radura Knife Assemblies........................................................ 70
SCH EasyCut II Cutting System.......................................52-53
SCH EasyCut II Kits...............................................................54-60
SCH EasyCut II Knifeheads................................................64-66
SCH EasyCut II Knife Assemblies.......................................... 61
SCH EasyCut II Parts............................................................62-63
SCH Pro-Flex Lifter.................................................................... 63
SCH Pro-Drive Kits..................................................................... 69
SCH Pro-Drive Knife Drive................................................67-68
Schuck Cushion Hitches....................................................74-75
Seed Level Indicator................................................................. 36
S.I. Belt Meter.............................................................................. 20
S.I. Belt Meter Kits................................................................21-23
S.I. Belt Meter Parts................................................................... 24
S.I. Distributing Show Schedule........................................... 79
Sure Mark Marker Weights..................................................... 25
Sure Stop...................................................................................... 44
Swift Hitch.................................................................................... 74
Swift Taillights...........................................................72
Tractor Safety Lights................................................................. 73
Trail-Jet Fertilizer Opener....................................................... 37
Trash Guard................................................................................. 36
V-Closing Wheel Bracket for Case IH
and White Planters.................................................................... 26
Vacuum Meters....................................................................14-15
VenHuizen AccuVac Kit........................................................... 14
WaveVision Seed Tube............................................................. 18
www.sidist.com
3
KEETON SEED FIRMERS
Keeton Seed Firmer Planter Application Guide
Make
Models
Great Plains Yield-Pro
7000
7100
7200
John Deere 7300
1700 Series
1530 Drill
1535 Drill
Installation Options Notes
Universal Bracket
Quick Attach
Kinze Bracket
Quick Attach
Quick Attach
4900 Series
KTN101001
$32.50
Standard dry tail
KTN101000
$31.50
Standard liquid tail
KTN101001
$32.50
Standard dry tail
KTN125012
$34.00
KTN115011
$34.00
Short low profile tai
KTN126008
$34.00
Quick Attach low profile tai
KTN109034
$35.00
Quick Attach standard tail
KTN109035
$35.00
Mounts to seed tube.
Will NOT fit dgeVac.
Will NOT fit 2013 mechanical me er planters.
Standard dry tail
KTN101000
$31.50
KTN101001
$32.50
Mounts inside row unit between scrapers.
Will NOT work with spring loaded disk scrapers.
Standard dry tail
KTN125014
$34.00
KTN115014
$34.00
KTN126011
$34.00
Mounts to seed disc opener shafts and lower seed
tube pin.
KTN109034
$35.00
KTN109035
$35.00
tube pin.
KTN110034
$35.00
KTN110035
$35.00
Standard dry tail
KTN101000
$31.50
KTN101001
$32.50
Bracket mounts to seed disk opener shafts and
around row unit shank.
Will fit axEmerge 5 row units with modific tions.
Will NOT fit Exa tEmerge row units.
tube pin.
Will fit axEmerge 2, Plus, Pro, XP, XP Pro, ME5
Will NOT fit Exa tEmerge row units.
Seed Tube Mount
Seed Tube Mount
Universal Bracket
9000 Series
Quick Attach
Seed Tube Mount
4
Mounts to seed tube. Also fits 1530, 1535 d ills and
MaxEmerge 5 but NOT ExactEmerge.
3000 Series
White
$31.50
Seed Tube Mount
Kinze
5000 Series
6000 Series
8000 Series
9000 Series
Price
KTN101000
2000 Series
3000 Series
All
Product ID
Standard dry tail
Seed Tube Mount
Seed Tube Mount
Monosem
Tail Options
800.368.7773
CALL TOLL-FREE TO ORDER TODAY.
Bracket mounts to seed disk opener shafts.
Bracket modific tion is required.
Will NOT fit 5000 se ies.
tube pin.
Kinze Bracket Mount
Standard dry tail
KTN101000
$31.50
KTN101001
$32.50
Standard dry tail
KTN125012
$34.00
KTN115011
$34.00
KTN126008
$34.00
KTN111034
$35.00
KTN111035
$35.00
Universal Bracket Mount
Quick Attach Bracket Mount
KEETON SEED FIRMERS
Firmer contact leads to
Uneven seed germination and uneven plant emergence sap yields. Plants
uniform emergence leads to
coming up even a little late can’t compete with their neighbors for resources and
1,000 more ears per acre.
at pollination they’re vulnerable to heat stress and insects. Keeton Seed Firmers
set the seed at the right depth and create consistent seed-to-soil contact. That
leads to uniform germination, uniform emergence, and tests show, an average increase of six bushels per acre.
• Set seeds to the bottom of the seed trench
• Hit the depth you set on your planter
• Ensures uniform seed-to-soil contact
• Ensures uniform seed germination
• Ensures uniform plant emergence
• Research proves an average six bushel increase in corn yield
Keeton Planter Replacement Parts
Product ID
Description
Price
KTN125011
Replacement Firmer, dry tail only, fits in Uni ersal or Kinze bracket
$29.00
KTN115013
Replacement Firmer, dual tube tail only, fits in Uni ersal or Kinze bracket
$29.00
KTN126010
Replacement Firmer, short low profile tail onl , fits in Uni ersal or Kinze bracket
$29.00
KTN121006
Replacement Firmer, long low profile tail onl , fits in Uni ersal or Kinze bracket
$29.00
KTN111505
Bracket, Kinze, with hardware
$10.50
KTN131500
Bracket, Universal, with hardware
$10.50
KTN150057
Pkg of 4, Bracket Kit for John Deere planters with Totally Tubular installed
$28.00
KTN900000
Tubing, blue, 1/4” diameter, per foot
$0.25
KTN900024
Tubing, red, 1/4” diameter, per foot
$0.25
KTN900017
Tubing, clear, 3/8” diameter x 2” long splice
$0.10
KTN900004
Splitter insert
$0.55
KTN900001
Hose clamp, for seed tube mount fi mers
$0.70
KTN900002
Zip tie, black; 14” long, used with seed tube mount Keetons & Bullseye seed tubes.
$0.40
KTN900003
Zip tie, white; 5” long, used with bracket style Keetons.
$0.20
HDW210245
Screw, 1/4-10 x 1-1/4, hex head slotted; for seed tube mount Keetons
$0.35
HDW210253
Screw, 1/4-20 x 1-3/4, hex head slotted; for bracket mount Keetons
$0.35
HDW210246
Screw, 1/4-10 x 1-3/4, hex head slotted; for seed tube mount Keetons with Mojo Wire
$1.63
Product ID
KTN140034
KTN140035
KTN150109
KTN150110
KTN150111
Description
Replacement Firmer, low profile tail onl , fits in uick Attach bracket
Replacement Firmer, standard tail, fits in uick Attach bracket
Bracket, Quick Attach, John Deere ME2, ME +, Pro, XP, ME5; Kinze 3000
Bracket, Quick Attach, Kinze 4900
Bracket, Quick Attach, White 9000
Quick Attach Replacement Parts
Price
$20.00
$20.00
$15.00
$15.00
$15.00
Keeton Planter Replacement Tails
Standard Dry Tail
Standard Liquid Tail
Short Low Profile Tail
Quick Attach Standard Tail
Quick Attach Low-Profile Tail
Standard replacement tail
with no liquid application
tube for Universal
and Kinze mounting
brackets. Compatible with
WaveVision seed tubes.
Recommended in nonsticky soil types and all
planting environments.
with two liquid application
tubes for Universal
and Kinze mounting
brackets. Compatible with
WaveVision seed tubes.
Recommended in nonsticky soil types and all
planting environments.
Low profile eplacement tail
with one liquid application
tube for Universal and
Kinze mounting brackets.
Compatible with WaveVision
seed tubes. Recommended
in sticky soil types and
no-till or minimum-till
planting environments. Not
recommended in sandy soil
types.
with one liquid application tube for Quick Attach
mounting brackets. Compatible with WaveVision seed
tubes. Recommended in
non-sticky soil types and all
planting environments
Low profile eplacement
tail with one liquid
application tube for Quick
Attach mounting brackets.
Compatible with WaveVision
seed tubes. Recommended
in sticky soil types and
no-till or minimum-till
planting environments. Not
recommended in sandy soil
types.
Product ID
Price
Product ID
Price
Product ID
Price
Product ID
Price
Product ID
Price
KTN125011
$29.00
KTN115013
$29.00
KTN126010
$29.00
KTN140035
$20.00
KTN140034
$20.00
www.sidist.com
5
KEETON SEED FIRMERS
Get the money-making advantages of Keeton Seed Firmers for your drill, too. New field t ials show that Firmers make you money in three ways:
• Reduced seed costs. Improved germination means you get better stands with fewer seeds. On average, tests show a 9.4% increase in soybean
germination. That translates to typical seed savings of about $2 per acre.
• Increased soybean yields. Field tests show an average yield increase of over 7%.
• Lower equipment and labor costs. Apply liquids as you plant with Keeton’s integrated liquid applicator tubes.
Seed savings alone will pay for the Keeton Seed Firmers during the first year. Then you’ll profit year after year from the additional yield. Keeton
Seed Firmers make a dramatic difference on shallow planted seeds like soybeans. Firming seeds into moisture and improving seed-to-soil
contact improves germination. So you can reduce seeding rates of expensive seeds while maintaining productive stands.
Make
Keeton Seed Firmer Drill Application Guide
Models
5100
5400
Case-IH
Notes
Tail Options
Product ID
Price
Mounts to scraper housing.
Standard liquid tail KTN210006
$29.50
CNH
CIH P-500
NH 2080, 2085
Mounts to opener on RIGHT side of drill.
Only works with Exapta closing wheel upgrade kit.
$42.25
CNH
CIH P-500
NH 2080, 2085
Mounts to opener on LEFT side of drill.
Only works with Exapta closing wheel upgrade kit.
$42.25
CNH
CIH P-500
NH 2080, 2085
Mounts to opener on RIGHT side of drill.
Works with OEM packer wheel.
Dry tail only
KTN210062
$43.25
CNH
CIH P-500
NH 2080, 2085
Mounts to opener on LEFT side of drill.
Works with OEM packer wheel.
Dry tail only
KTN210063
$43.25
Crustbuster
3700, 3800
3400 w/o parallel arms
Mounts on scraper bracket.
Will not fit 3400 ll-Plant or 3400 Min-Till openers.
$30.50
Crustbuster
3400 Series
4000 Series
Mounts to scraper support rod.
Fits All-Plant & Min-Till openers.
$30.50
Great Plains
Fluted Metering Wheel Drills: 00, 05, 06, 07,
Mounts to scraper bracket.
10 Series; 20 Series (-2003)
$29.50
Great Plains
Precision Drills (singulating & volumetric
metering wheel): 10, 20 Series
$29.50
Great Plains
15, 25 Series Planter Style Row Units and
HD10 Series Row Units
$29.50
$29.50
Great Plains All 00HD Series Row Units
John Deere
1560, 1860
1590, 1890
1690, 1990
Mounts to back of t-handle slotted bracket.
$35.50
John Deere
450, 455
1520
Mounts to seed disk scraper.
$29.50
John Deere
750, 1850
$35.50
Krause
Most
Mounts to fertilizer opener.
Will not fit 5200 and 5400
$30.50
Marliss
Most
Mounts to seed disk opener.
Will not fit 2038
$30.50
Sunfl wer
9411, 9412, 9421
Mounts to back of disk opener casting.
Modified d y tail
KTN210024
$30.50
Tye
All
$30.50
Product ID
KTN210054
Product Description
Replacement Firmer, drill, standard liquid
Replacement Firmer, drill, narrow liquid
Recommended for Great Plains Yield Pro planters.
Replacement Firmer, Sunfl wer drill, modified d y tail
Replacement Firmer, CIH P-500, NH 2080, 2085, modified liquid tai
Replacement Firmer, CIH P-500, NH 2080, 2085, modified d y tail
Tubing, blue, 1/4” diameter, per foot
Tubing, clear, 3/8” diameter x 2” long splice
Keeton Drill Replacement Parts
KTN210055
KTN210025
KTN210056
KTN210059
KTN900000
KTN900017
6
800.368.7773
Price
$27.50
$27.50
$30.50
$31.50
$32.50
$0.25
$0.10
• Mounting brackets and
instructions are included.
• Drill fi mers are only available
with liquid tails.
• For non-liquid use simply
remove the tube from the tail.
Standard Liquid Drill Tail
MOJO WIRE
In North America, most seeders were never really engineered to plant no-till. For instance, the original press wheels on all planters (and so-called
“no-till” drills) were designed for the loose, dry conditions found in tilled seedbeds—they were intended to pack the soil from the surface all the way
down to the seed, which was easily done in loose tilled soil. Substantial packing was desirable to help the seed draw moisture from beneath, since
the soil near the surface had dried with tillage.
In no-till, this concept is terribly fl wed. No-till soils are resilient (structured) and don’t readily fall back into the furrow. Plus, an
enormous amount of pressure must be applied at the surface to do any seed fi ming at all down in the bottom of the furrow. In notill, to get even 5 lbs of pressure at seed depth might require 50 to 150 lbs. applied to the press wheel at the surface, and even then it
might not be enough and certainly won’t be consistent at seed depth. You are severely packing the sidewalls and soil over the seed
(thru which it must push) in attempting to do something down at the bottom of the furrow. Why not just apply a precise amount
of pressure exactly where it’s needed—at the bottom of the furrow?
In the early ’90s, this is exactly what the introduction of the Keeton seed fi mer was supposed to do. However, the Keetons
applied only a few ounces to (at most) ~ 1.5 lbs of pressure on the business end of the Keeton. In many cases, that
wasn’t enough force. The situation is made worse by the fact that the nylon material used to mold the Keetons
loses its integrity (springiness) after awhile (apparently due to absorbing moisture, ‘cold fl wing,’ and
UV degradation).
To remedy the situation, Exapta introduced the Mojo Wire stiffener in 2006, which supplies
up to 5 times the pressure to the standard Keeton. In our testing and our customers’
experience, we’ve simply been amazed at how much better the germination
Why the Mojo Wire?
consistency was—both in terms of higher percentages of seeds emerging, and in
• 3x to 5x pressure of standard Keeton
uniformity of timing of emergence.
• Ensures fast, uniform germination
Another noticeable improvement was in the self-cleaning action of the Keeton
• Large payback potential, especially in
against the furrow sidewalls. Adding the Mojo Wire has improved this selfresilient no-till soils
cleaning action, at least in low-disturbance no-till.
• Quick fix or limp, aging Keeton firmer
Mojo Wire Kits
Product Description
Price
Mojo Wire, for Keeton seed tube mount
$23.00
Mojo Wire, for standard Keeton bracket mount
$20.00
Mojo Wire, for Wave Vision Keeton bracket mount, dry & liquid tails $20.00
Mojo Wire, for Wave Vision Keeton bracket mount, dry tails only
$9.00
Mojo Wire, for Keeton drill fi mer
$9.00
Mojo Wire, for CNH Keeton drill fi mer
$12.00
Mojo Wire Replacement Parts
Product ID Product Description
Price
KTN400900 Plastic mounting block for tubing
$5.50
KTN400901 Hose clamp
$1.25
KTN400902 Wire for KTN400100
$4.50
KTN400903 Steel mounting block for KTN400100
$5.50
$7.00
$7.00
HDW210246 Screw, 1/4-10 x 1-3/4, hex head slotted for KTN400100
$1.63
Product ID
KTN400100
KTN400200
KTN400211
KTN400212
KTN400600
KTN400608
Features Include:
• Leak Resistant Dual EPDM O-Rings
• Chemical Resistant Polypropylene
• NSF Standard 58 Certifie
• 150 psi @ 70ºF
• 60 psi @ 140ºF
• For Use with Plastic or Soft Metal Tubing
Mur-lok® Fitting Installation Instructions
NOTE: One drawback to increasing the pressure on the Keeton
is that the tail wears more quickly. If you put lots of acres on your
planter in a season, expect to completely wear out a set of Keetons
with the Mojo Wire installed.
Mojo Wires fit most pl nter Keetons. Will NOT fit l w profile
tails.
MUR-LOK FITTINGS
Product ID
KTN500000
KTN500001
KTN500002
KTN500003
KTN500004
KTN500005
KTN500006
KTN500100
KTN500101
Product Description
Mur-Lok union, 1/4” to 1/4”
Mur-Lok divider, 1/4” to 1/4”
Mur-Lok divider, 3/8” to 3/8”
Price
$2.07
$2.82
$2.80
$3.80
$3.22
$2.27
$2.20
$3.25
$3.76
1. MAKE A CLEAN TUBE CUT
2. INSERT TUBE INTO FITTING
3. TEST AND INSPECT
Cut the tube squarely and if using plastic tubing,
ensure that the cut has not made the tube out of
round. Also ensure that the tube has a smooth
outside diameter without any burrs or score marks
prior to inserting it into the fittin .
Push the tubing through the collet and dual o-rings
until it bottoms out against the tube stop. The collet
holds the tube in place and the dual o-rings provide
a leak resistant seal.
Push and pull the tubing toward and away from the
fitting o ensure that it has been installed properly.
Test & inspect for any leaks.
www.sidist.com
7
MARTIN PLANTING
ATTACHMENTS
Martin Row Cleaners
Properly designed row cleaners provide a very desirable type of tillage. The row cleaner teeth continuously
engage the soil to the shallow depth of 1” to 1-1/2”. This scarifying of the soil’s surface layer makes it easier
for the seed openers to open a well-defined “V” but without furrowing out or causing slabbing or fla ing.
Eliminating furrows is the key to preventing erosion in the row on slopes and the ponding of water over the
row in level areas.
All Martin Row Cleaners
Feature the Following:
•Heavy duty frame
• 3/8” thick, heat treated, T-1
wheels
• Stationary triple-lip seals
• Heavy gauge dust caps
• Double tapered bearings
• Greaseable hubs
Martin Row Cleaners come in two basic types:
Pin Adjust: Our pin adjust models are more aggressive
row cleaners and are particularly useful when a furrow is needed to reach moisture. Pin Adjust
models are available for all popular planters.
Floating: The WA1360 flo ting row cleaners are designed to follow the contours of the soil
surface, consistently moving residue away from the path of the gauge wheels. This allows
the gauge wheels to run in the cleared zone to promote uniform depth control and facilitate
quicker soil warning and rapid emergence. Floating models fit most pla ters and may be used
ahead of most no-till coulters and certain fertilizer openers including the Martin UMO-100.
1. Row cleaners move residue and lightly till the row
2. Fertilizer opener places liquid fertilizer beside the row
3. Keetons fi m the seed in the bottom of the seed trench
4. Spading closing wheels lift and fracture the sidewall
5. Drag chains level and lightly fi m the row top
WA1360 Floating Row Cleaner
• Most compact flo ting row cleaner available. Only requires 19” of clearance from planter face plate, 22”
when using with no-till coulter and 25” when using with Martin UMO-100 fertilizer opener
• Optional cam dial depth adjustment
• Wheels can be installed in the intersected, offset, or retracted operating positions
Product ID
MRT001360
Vendor ID
WA1360
Product ID
MRT001361
MRT001363*
MRT001362
MRT001368
MRT001365*
Vendor ID
MT1360KS
MT1360KU
MT1360DS
MT1360DC
MT1360DU
Martin WA1360 Floating Row Cleaners
Description
Wrap around flo ting row cleaner, 13” wheels (mounting bracket not included)
Martin WA1360 Mounting Brackets
Price
$374.50
Description
Price
John Deere 7000, 7100, Kinze, White 6000, 8000 series w/o no-till coulters
$68.50
John Deere 7000, 7100, Kinze, White 6000, 8000 series with Martin UMO
$78.50
John Deere 7200, 7300, 1700 including ME5 without no-till coulters
$68.50
John Deere 7200, 7300, 1700 including ME5 with OEM unit mount, no-till coulter $68.50
John Deere 7200, 7300, 1700 including ME5, White 9000 series with Martin UMO
$78.50
WA1360 Operating Positions
John Deere 7200, 7300, 1700 including ME5 with OEM double disc fertilizer
MRT001376 MT1360DD
$73.00
openers
A. Intersected
Good for no-till conditions
MRT001367 MT1360KC Kinze with OEM double arm, unit mount, no-till coulter
$68.50
MRT001377 MT1360K4 Kinze 4900 series without no-till coulters
$68.50
B. Offset
$68.50
Use in freshly worked soil or loose sandy MRT001378 MT1360K4C Kinze 4900 series with OEM double arm, unit mount, no-till coulter
MTconditions. Suitable for no-till. May be
MRT001379*
Kinze 4900 series with Martin UMO
$78.50
1360K4U
used behind certain forward mounted
fertilizer openers
MRT001369 MT1360CIH Case-IH 800-1300 series without no-till coulters
$92.50
*Only one bracket is required to mount both Martin WA1360 row cleaner and Martin UMO-100 fertilizer opener.
C. Retracted
Use this position if the overall length is
Martin WA1360 Accessories
too long.
Product ID Vendor ID Description
Price
MRT003002 STW-04
Aluminum side treader wheel (2 required per row) 4-bolt
$32.00
MRT003146 WW-04
Wheel weight, for row cleaner wheel, 4-bolt, 4 lbs. each
$21.00
Cam adjustment kit, all JD; Kinze w/o no-till coulters; White 6000, 8000 series
MRT003154 CA-03D
$63.50
with UMO; Case-IH 1200 series with UMO, WA1360 row cleaners
Cam adjustment kit, Kinze with OEM no-till coulters, WA1360 row cleaners
MRT003155 CA-03K
$66.50
Does NOT fit inze 4900 series
Optional
cam dial
MRT003500 USB-70
Unit set back bracket, John Deere 7000, 7100, Kinze
$81.50
depth
MRT003510 USB-72
Unit set back bracket, John Deere 7200, 7300, 1700 Series
$116.50
adjustment
MRT007106 HDP-CIH01 Heavy duty lower parallel linkage set, Case-IH 1200, 1300 series
$115.50
8
800.368.7773
MARTIN PLANTING
ATTACHMENTS
Martin Row Cleaners
C125 Floating Row Cleaner
•
•
•
•
•
•
The C-125 was replaced by the WA1360; however it is still available for certain planter
configu ations such as with aftermarket no-till coulters.
Floats to follow ground contour
Threaded depth adjustment limits down travel while allowing the semi-mounted frame to
follow the contour of the land
Moveable axles with the Martin Exclusive D-lock System allow several mounting positions
(intersect, offset, retracted)
13” diameter left- and right-toothed steel wheels with diamond shaped points (15” wheels may be
used on certain planters)
Includes internal defle tors protected under U.S. Patent #5,507,351
C125
Shown with optional side
treader wheels (STW-04)
Side Treader Wheels
Our side treader wheels are a very good option, one most customers order, for the flo ting row cleaners
because they help prevent unwanted trenching in softer parts of the fiel . Recent Farm Journal tests
show a large yield increase when using this option.
Product ID Vendor ID
MRT012504 C125
MRT112504 C125-GPTL
MRT212504 C125-GPTR
Martin C125 Mounting Brackets
MRT001412 C125MTR-G1
Product ID
MRT003000
MRT003001
MRT003002
MRT003143
MRT003145
MRT003146
MRT003147
MRT003500
MRT003510
Vendor ID
STW-01
STW-01K
STW-04
CA-02
DP-01
WW-04
CDP-01
USB-70
USB-72
Description
Aluminum side treader wheel (2 required per row) 6-bolt, for Kinze
Cam adjustment kit, C125 flo ting row cleaners
Down pressure kit, C125 flo ting row cleaners
Wheel weight, for row cleaner wheel, 4-bolt, 4 lbs. each
Cam adjustment & down pressure kit, C125 flo ting row cleaners
Unit set back bracket, John Deere 7000, 7100, Kinze
Unit set back bracket, John Deere 7200, 7300, 1700 Series
Product ID
MRT003900
MRT003901
MRT003905
MRT003906
MRT003909
MRT003910
MRT004158
MRT004159
MRT004177
MRT004178
MRT003908
MRT003902
MRT003907
MRT003903
MRT004167
MRT004190
MRT004175
Vendor ID Description
TW3813-L3 Wheel, 13” 3-bolt, LH on row cleaner, RH on closing wheels
TW3813-R3 Wheel, 13” 3-bolt, RH on row cleaner, LH on closing wheels
TW3813-LK Wheel, 13” 6-bolt, LH on row cleaner, RH on closing wheels
TW3813-RK Wheel, 13” 6-bolt, RH on row cleaner, LH on closing wheels
HA13305-D Hub & Axle, 3-bolt, for Martin pin adjust row cleaners, WA1317, WA1330
HA13270-D Hub & Axle, 3-bolt, for Martin flo ting row cleaners, C125
HA44270-D Hub & Axle, 4-bolt, for Martin row cleaners, C125, WA1360, WA1332, WA1334, WA1532
CHU024
Hub, 3-bolt, for Martin closing wheels with single bearing, 5/8” I.D.
CHU022
Hub, 3-bolt, for Martin closing wheels with two bearings, 17mm I.D.
CHU044-B2 Hub, 4-bolt, for Martin closing wheels with single bearing, 5/8” I.D.
CHU44-A
Hub, 4-bolt, for Martin closing wheels with two bearings, 17mm I.D.
Note: 13” wheels should be replaced when 12” or less and 15” wheels when 13-3/4” or less
MRT001401 C125MTS-XP
MRT001402 C125MTR-IH
MRT001409 C125MTR-81
MRT001404 C125MTR-XP
C125MTR-IH
Martin C125 Floating Row Cleaners
Description
Price
Wrap around flo ting row cleaner, 13” wheels (mounting bracket not included) $374.50
Wrap around flo ting row cleaner, 13” single wheel, Great Plains Twin Row, LH
$321.50
Includes single wheel row cleaner, mounting bracket & side treader wheel
Wrap around flo ting row cleaner, 13” single wheel, Great Plains Twin Row, RH
$321.50
Includes single wheel row cleaner, mounting bracket & side treader wheel
Description
John Deere 7000, 7100, Kinze, White 6000 series, with no-till coulters, 24-3/4”
long
John Deere 7200-1700 including ME5, White 9000, without no-till coulters,
19-5/16” long
Case-IH 800-1300 series with no-till coulters, 28” long
White 8000 series with no-till coulters, 24-3/4” long
John Deere 7200-1700 will fit ME5, White 9000 with no-till coulters; Great Plains
6030; 24-3/4” long
Great Plains Yield-Pro Planter, 30” rows, use standard C125 row cleaner
MRT001400 C125MTR
C125MTR
Martin C125 Accessories
Martin Row Cleaner & Spader Wheel Replacement Parts
Price
$68.50
$68.50
$73.00
$68.50
$68.50
$68.50
Price
$32.00
$36.50
$32.00
$44.00
$44.00
$21.00
$65.00
$81.50
$116.50
Price
$56.00
$56.00
$56.00
$56.00
$61.50
$61.50
$65.50
$65.50
$65.50
$65.50
$81.50
$81.50
$81.50
$44.00
$44.00
$63.50
$63.50
C125MTR-81
C125MTR-XP
STW-04
Side treader wheels
increase traction and
flot tion. Useful in
loose soil or extremely
heavy residue. Two
required per row.
CA-02
Allows adjustment
in 1/4” increments.
DP-01
Adds up to 20 lbs of
down pressure to row
cleaner. For use when
planting in severe soil
conditions.
CDP-01
Allows adjustment in
1/4” increments and
adds up to 20 lbs of
down pressure.
USB70
Unit set back kit.
Moves planter unit
back 6”.
USB72
Unit set back kit.
Moves planter unit
back 6”.
WW-04
Wheel weights add
weight to row cleaner.
Helpful when planting
in heavy residue
situations.
www.sidist.com
9
MARTIN PLANTING
ATTACHMENTS
Martin Pin Adjust Row Cleaners
The Martin original style row cleaner clears the widest path of any tooth wheel row cleaner on the market.
The 15” diameter, 3/8” thick, T-1 heat-treated wheels are made left and right in order to shed the residue
better. The axles are located to the rear of the adjustable stem in order to insure a simultaneous stretching
and cutting of the residue. The teeth on the cleaning wheels actually reach past the edge of the planter
gauge wheel rubber.
WA1532 Martin Original Style Row Cleaner
• Rigidly mounted directly to planter unit face plate
• Easily adjustable in 1/4” increments with lift assist handle and spring
• 3/8” thick, 15” diameter, toothed steel wheels with diamond shaped points - largest on the market
• Includes internal defle tors protected under U.S. Patent #5,507,351
• Cast 4-bolt hub
• Double tapered bearings
• Triple lip seals
WA1532
WA1332 and WA1334 Row Cleaners
• Rigidly mounted directly to planter unit face plate
• Easily adjustable in 1/4” increments with lift assist handle and spring
• Movable axles with the Martin Exclusive D-Lock System allow for several mounting positions (intersect,
offset, retracted)
• 13” diameter toothed steel wheels with diamond shaped points allow plenty of upward adjustment in
loosely worked soils
• Includes internal defle tors protected under U.S. Patent #5,507,351
A. Intersected
For use in fi m soil conditions
and severe residue.
WA1332 and WA1334 Operating Positions
A.
B.
WA1532 Dimensions
C.
B. Left or Right Offset
For moderate residue and
freshly tilled soil.
C. Retracted
Can be used behind certain
frame mounted coulters.
Product ID
MRT001320
MRT001332
MRT001334
MRT001532
Vendor ID
WA1320N
WA1332
WA1334
WA1532
Martin Pin-Adjust Row Cleaners
Description
Pin-adjust row cleaner, narrow row, 1-½” stem, 13” wheels
Pin-adjust row cleaner, 1-½” stem, 13” wheels
Pin-adjust row cleaner, 2” stem for Case-IH planters, 13” wheels
Pin-adjust row cleaner, 1-½” stem, 15” wheels
Price
$344.00
$346.00
$346.00
$365.00
Martin Pin-Adjust Mounting Brackets
John Deere, Kinze, White EARLY 6000 series with REGULAR down pressure springs and
MRT002000 MT772
White 9000, accepts 1-½” stem wheel assemblies
Case-IH 800, 900 series without heavy duty down pressure springs, accepts 2” stem
MRT000892 MT892
wheel assemblies
MRT001250 MT1250
Case-IH 1200, 1300 series, accepts 2” stem wheel assemblies
MRT002200 MT512
White 5000 series, accepts 1-½” stem wheel assemblies
White EARLY 6000 series with HEAVY duty down pressure springs, accepts 1-½” stem
MRT000610 MT610
wheel assemblies
MRT002100 MT810
White LATE 6000 series and all 8000 series, accepts 1-½” stem wheel assemblies
MRT002400 MT385
Deutz-Allis Quadra Disk, Landoll, accepts 1-½” stem wheel assemblies
MRT004772 MT4772
Kinze 4900 w/o pneumatic down pressure, accepts 1-½” stem wheel assemblies
MT772
MT892
800.368.7773
10 CALL TOLL-FREE TO ORDER TODAY.
MT1250
MT512
MT610
Price
$77.00
$63.00
$63.00
$64.00
$78.00
$82.00
$64.00
$77.00
WA1334
WA1332
WA1332 Row Cleaner
1-1/2” stem wheel assembly. For use with all
pin adjust brackets that
accept 1-1/2” stem.
WA1334 Row Cleaner
2” stem wheel assembly.
For use with MT892 and
MT1250 bracket.
MT810
MT385
MARTIN PLANTING
ATTACHMENTS
UMO-100 Fertilizer Opener
The fertilizer opener mounts directly to the planting unit and is compact enough to be mounted
within the WA1360 and C125 flo ting row cleaners. Because the opener mounts directly to the
planter unit, the fertilizer is always precisely the same distance from the seed even when planting on
the contour. The lateral spacing from the seed can be 1”, 2”, or 3”, and there are three vertical settings
that allow fertilizer to be placed 3/4” above, even with, or 3/4” below seed depth. We like the way it
consistently places the fertilizer in the ground without splattering on the planter.
Requires 13-1/2” of clearance from face plate of row unit.
Apply nitrogen to side of seed furrow in a single pass.
UMO-100
FEATURES OF UMO-100:
Martin Unit Mounted Fertilizer Opener
Price
MRT100100 UMO-100L Single disk unit mounted fertilizer opener, left
$384.00
MRT200100 UMO-100R Single disk unit mounted fertilizer opener, right
$384.00
Martin Unit Mounted Fertilizer Opener Brackets
Price
MRT000300 UMO-MTJ
Bracket, John Deere 7200-1700 including ME5, White 9000 series
$35.50
MRT000301 UMO-MTA
Bracket, John Deere 7000, 7100 and Kinze planters
$35.50
MRT000302 UMO-MTW Bracket, White 8000 series planters
$35.50
MRT000303 UMO-MTG
$35.50
Bracket, Great Plains Yield-Pro Planter, mounts on top of standard C125 bracket
• Sturdy compact design
• Double tapered bearing hub
• 5mm thick (0.197”) blade
• Adjustable furrow control
device
• Can be set to place liquids 1”,
2”, or 3” from seed row
• Can also be set to place
liquids 3/4” above, even with
or 3/4” below seed depth
• Fit John Deere 7000-1700
series, all Kinze, White 6000 &
8000 series and Case-IH 1200
& 1300 series.
• Patent #7,481,171
Reduced Inner Diameter Gauge Tires
RID-01 Tire
• Reduced inner diameter gauge tires
• Allows seed trench to lift and fracture
• Softer, more fl xible compound better sheds wet soil
• Fits existing John Deere, Kinze, and White rims
• Two required per row
Note: Reduced inner diameter gauge tires are NOT
recommended for use in tilled soil conditions.
Product ID
Vendor ID
MRT003730
RID-01
MRT003731
N/A
Description
Gauge wheel tire, RID, John Deere MaxEmerge, MaxEmerge 2, MaxEmerge Plus, Pro planters; John Deere 750,
1560, 1850, 1860 drills; John Deere 1530, 1535 drills with MaxEmerge Plus row units; John Deere early 1590, 1690,
1835, 1890, 1895, 1990 drills; Kinze planters; Case-IH 800, 900, 950, 955, 1200 planters; Case-IH SDX30, SDX40 air
drills; New Holland SP280, SP380, SP480, SP580 planters.
Gauge wheel tire, RID, John Deere XP, XP Pro planters; John Deere 1530, 1535 drills with XP row units; John Deere
late 1590, 1690, 1835, 1890, 1895, 1990 drills.
Price
$28.95
$34.95
Twisted Drag Chain
DCK-01 drag chain kit
• Crumbles, fills unclosed a eas and levels soil above
the seed slot
• Heavy-duty, square-edged cross chain and brackets
• Attaches to closing wheel brackets
• Bolts to all John Deere Max-Emerge units
• Fits Kinze and White units with bolt-on wheels
• Kinze units with roll pin attached closing wheels will
need holes drilled for mounting
Price
MRT003600
$38.00
DCK-01
Drag chain kit
www.sidist.com
11
MARTIN PLANTING
ATTACHMENTS
Spading Closing Wheels
Pictures above illustrate the difference between the
seed trench after the Martin Spading-Closing wheel
set passes on the left, compared to the seed trench
after the regular closing wheel set passes on the right.
Martin spading closing wheels move soil
toward the seed at planting depth, while lifting
and fracturing the surface layer to achieve
compaction-free closing of the seed trench in
wet, hard or sod conditions. With soil fi med
around the seed from each side and the surface
layer loosened, crops emerge sooner and
planting can be done at the proper depth, even
in wetter conditions, without fear of crushed
soil above the seed preventing emergence.
Available for John Deere, Kinze,
White, Case-IH & Great Plains
SPECIFIC ADVANTAGES
• Speeds up warming of the row
area
• Closing wheel arm pressure can be
greatly reduced
• Seed trench is closed in the most
severe conditions
• Seed depth does not have to be
raised to insure emergence
• Soil above the seed is loose and
slightly mounded allowing quicker
emergence in a compaction-free
environment
• Sidewall compaction is greatly
reduced
Planter Spading Closing Wheels
SCW1341 Closing Wheels
• 3/8” thick, 13” diameter right and
left toothed steel wheels with
diamond shaped points
• Cast hubs
• Adaptor axles
• For planters with roll-pin attached hubs: Deere 7000 & 7100
series, early Kinze series planters
• Two 17mm I.D. bearings
• 3/8” thick, 15” diameter right or
left toothed steel wheel with
• Cast hub
• Adaptor axle
• For planters with roll-pin attached hubs: Deere 7000 & 7100
series and early Kinze planters
• 3/8” thick, 15” diameter right or
left toothed steel wheel with
• Cast hub
• For Deere 7200 & 7300 series
planters
DK-01
• Bolts to John Deere or Kinze closing
wheel frame with bolt-on closing wheels.
• Lowers the closing wheels so the frame
runs level.
• Designed for paired 13” spading closing
wheels when used in loose soils
ITDSCW
MRT001341
BSCW1341
MRT001343
BSCW1343
MRT001344
BSCW1344
MRT101541
BSCW1541SL
MRT201541
BSCW1541SR
MRT101543
BSCW1543SL
MRT201543
BSCW1543SR
MRT101544
BSCW1544SL
MRT201544
BSCW1544SR
800.368.7773
MRT004191
DK-01
MRT003149
ITDSCWSET
• Cast hubs
• For Deere 7200-7300 series
planters
• Cast hubs
• For planters with bolt-on hubs:
Deere 1700 series, Kinze & White
6000 & 8000 series planters
• Single 2-row 5/8” I.D. ball bearing
•
•
•
3/8” thick, 15” diameter right or left
toothed steel wheel with diamond
shaped points
Cast hub
For planters with bolt-on hubs:
Deere1700 series, Kinze and White
6000 & 8000 series planters
• Single 2-row 5/8” I.D. ball bearing
Martin Planter Spading Closing Wheels
Description
13” double closing wheel set, John Deere and Kinze planters with roll pin attached
closing wheels, water pump bearing
13” double closing wheel set, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded spindle on closing wheel bracket) and Great Plains 6030, 17mm bearing
13” double closing wheel set, John Deere, Kinze, White, Great Plains planters with
bolt-on closing wheels, 5/8” bearing
15” single closing wheel, John Deere and Kinze planters with roll pin attached closing wheels, left side of row, water pump bearing
15” single closing wheel, John Deere and Kinze planters with roll pin attached closing wheels, right side of row, water pump bearing
15” single closing wheel, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded
spindle on closing wheel bracket) GP 6030, left side of row, 17mm bearing
15” single closing wheel, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded
spindle on closing wheel bracket) GP 6030, right side of row, 17mm bearing
15” single closing wheel, John Deere, Kinze, White, Great Plains planters with bolton closing wheels, left side of row, 5/8” bearing
15” single closing wheel, John Deere, Kinze, White, Great Plains planters with bolton closing wheels, right side of row, 5/8” bearing
Martin Planter Spading Closing Wheels Options
Description
Drop down kit. Bolts to John Deere or Kinze closing wheel frame with bolt-on 13”
spading closing wheels. Lowers the closing wheels so the frame runs level.
Internal defle tors (scrapers) for spading closing wheels. Reduces buildup of mud
and residue to insure fractured soil is placed evenly over seed trench. Only works
with 5/8” bolt-on style 13” and 15” spading closing wheels.
Price
$252.00
$239.00
$239.00
$135.50
$135.50
$129.00
$129.00
$129.00
$129.00
Price
$22.00
$28.00
MARTIN PLANTING
ATTACHMENTS
Planter Spading Closing Wheels
SCW514 & SCW614 Double Closing Wheel Sets. These closing wheels can be added to the White 5000
or 6000 series planters that have single closing tires. The Martin Spading-Closing Wheels enhance closing
of the seed trench while the smooth wheel gently fi ms the surface.
Moist soil is moved toward the seed at seeding depth even in wet, hard or sod conditions. In wet conditions, the soil is prevented from forming a continuous ribbon by the lifting action of the teeth as they
rotate up out of the soil.
Other benefits include
• Closing wheel arm pressure can be greatly reduced
• Seed trench is closed in the most severe conditions
• Seeding depth does not have to be raised to insure
emergence
• Soil above the seed is loose allowing quicker
emergence in a compaction free environment
• Sidewall compaction is eliminated
Advantages:
• Double 3/8” thick, 13” diameter, left &
right toothed steel wheels with diamond
shaped points
• Cast hubs with single 2-row ball bearing
• Left & right angled brackets
• Does not change planter’s overall length
White Planter
Martin Planter Spading Closing Wheels
MRT005104 BSCW514 13” double closing wheel set, White 5100 planters with single 4” x 12” factory closing wheel option, attaches to H-frame
MRT006104 BSCW614 13” double closing wheel set, White 6100 planters with single 4” x 12” factory closing wheel option, attaches to H-frame
9” double closing wheel set, Case IH planters and John Deere & Kinze planters with shallow closing attachments, replaces
MRT089903 BSCW899
OEM covering discs
SCW899
BSCW51
Price
$279.00
$279.00
$125.00
• 9” diameter toothed steel
wheels & ball bearing hubs
• Replaces offset closing disk
on Case IH planters
• Also fit JD & inze shallow
closing systems
Case-IH Planter
BSCW61
Martin Drill Spading Closing Wheels
Product ID
MRT175404
MRT275404
MRT075104
MRT075204
MRT115604
MRT215604
MRT315604
Vendor ID
BSCW75B4L
BSCW75B4R
BSCW75B4D-20R
BSCW75B4D-20L
BSCW1564L
BSCW1564R
BSCW1564D-20
SCW75B4
Spading-Closing
Wheel
Description
13” single spiked closing wheel, John Deere 750, 1850 drill, LH
13” single spiked closing wheel, John Deere 750, 1850 drill, RH
13” single 20 pt. dimple closing wheel, John Deere 750, 1850, RH
13” single 20 pt. dimple closing wheel, John Deere 750, 1850, LH
13” single spiked closing wheel, John Deere 1560-1990 drills, LH
13” single spiked closing wheel, John Deere 1560-1990 drills, RH
13” single 20 pt. dimple closing wheel, John Deere 1560-1990 drills
SCW1564
Spading-Closing
Wheel
SCW75B4D
20 Point
Dimple-Closing
Wheel
Price
$130.00
$130.00
$127.00
$127.00
$89.50
$89.50
$86.50
SCW1564D
20 Point
Dimple-Closing
Wheel
www.sidist.com
13
CLEANSWEEP
NOW, with CleanSweep™, you no longer have to hope, but you can manage your row cleaner
performance, from the cab, on the go.
Row Cleaners are a great planter attachment for handling excessive residue during planting. They remove the plant debris and
create a uniform seedbed; However, too light of setting leaves residue in the row competing for moisture and nutrients. Too heavy
of setting tills and moves soil creating trenches and potentially alter planting depth.
Properly set row cleaners and flo ting row cleaners are ways growers could look to reduce these negative impacts, but conditions
can vary greatly from field o fiel , day to day, even row to row. And, making these adjustments are time consuming. Thus, most
growers set for the average and hope for good performance.
CleanSweep is a dual air cylinder that lets you set and adjust your row cleaners’
down pressure from the cab.
1..Have heavy residue? Add more pressure to sweep away the debris.
2..Have light residue or soft ground? Lighten the pressure and keep the
row cleaner flo ting across the top.
The cylinders have a control box mounted in the cab. You set the pounds
of pressure from your cab based on the condition you are in. Plus, the
pressurized cylinder gives the row cleaner the ability to adjust or “flo t”
across the small changes you encounter such as terrain or varying amounts
of debris
The CleanSweep system includes air cylinders, lines, air tank, compressor
and controller. Available for these row cleaner models:
•
•
•
•
Martin C125 MTS, MTS-XP, MTS-81, MTS-IH; with or without Martin UMO
Martin C125 MTR, MTR-XP, MTR-81, MTR-IH; with or without Martin UMO
Martin WA1360 BD, BK, BW, BCIH, BDC; with or without Martin UMO
.Yetter 2967-007, 2967-029, 2967-035 (short bracket), 2967-035, 2967042, 2967-043, 2967-115
• Kinze OEM row cleaner & no-till coulter combo; welded or cast style
CleanSweep System
Planter Rows
With Air Compressor
Without Air Compressor
8
$2,736.00
$1,986.00
12
$3,404.00
$2,654.00
16
$4,072.00
$3,322.00
24
$5,408.00
$4,658.00
36
$7,412.00
$6,662.00
48
$9,416.00
$8,666.00
54
$10,418.00
$9,668.00
Air Compressor & Tank
Basic system includes cab controller, air line kit, cylinders & mounting brackets.
800.368.7773
Cab Controller
QUICK CRANK
TRASHWHIPPER ADJUSTER
For Factory Installed, Pin-Adjust, Yetter Residue Managers on John Deere Planters
Will only work with Yetter model #2967-15 fi ed row cleaners
Provides the Opportunity to Raise Height
of Residue Managers an Additional 3/4”
Features:
• Converts fi ed pin-adjust residue managers to screw-adjust
• Height adjustments can be made in seconds while standing in front of the planter
• Extremely quick – approximately 60 seconds to adjust 12 rows
• Allows adjustments to be made easily in the field as conditions
change
• Installation requires no cutting or welding of original residue
managers or on the planter
• Provides the opportunity to raise height of
residue managers an additional 3/4”
• Powder coat painted
Quick Crank Trashwhipper Adjuster
Product ID
Description
PLT130602
PLT130601
Quick Crank Trashwhipper Adjuster
Crank Handle
Price
$99.00
$20.00
PLT130601
DEPTH-A-MATIC
The Depth-A-Matic can easily be installed on your planter in approximately ten minutes per
row. Simply remove one depth control wheel, remove snap ring from pin, remove pin that
holds depth stop and remove old depth stop. Then install the Depth-A-Matic in its place, with
our replacement bolt and locknut.
Advantages include:
• It allows the depth gauge wheels to follow the ground terrain allowing the unit to travel
smoothly in all field onditions
• More equal compaction on either side of the disk
enhances seed to soil contact and equal emergence
• Consistent seed depth control
• Longer seed disk life in rocky conditions
• Life of depth gauge wheels is greatly extended in
all rocky and no-till conditions
• Less bearing failure on depth gauge wheels
• Includes installation hardware
John Deere
7200
7300
1700
Depth-A-Matic
Product ID
Description
DAM001000
Depth-A-Matic, John Deere 7000, 7100; Kinze and New Idea planters.
Does not fit inze 3000 series row units.
$32.95
DAM002000
Depth-A-Matic, John Deere 7200, 7300 and 1700 series.
Does not fit John eere XP, XP Pro row units.
$42.95
John Deere
7000
7100
Price
Depth-A-Matic Replacement Parts
DAM003100
Rocker, for Depth-A-Matic
$13.95
DAM003200
Roll pin, for Depth-A-Matic
$0.50
Rocker
www.sidist.com
15
VENHUIZEN ACCUVAC KIT
The VenHuizen AccuVac kit for John Deere can also plant most sizes of seed corn, even mixed
sizes, without changing the plate and with minimal vacuum level changes on the planter.
Kit includes:
• A VenHuizen AccuVac 40-hole seed corn plate
• The modified adjustable “Seed Singulator Kit”
• Adjustment tool to properly set the singulator kit
• New seed guide
• Installation hardware and detailed instructions
BMP001775
PPM930004
PPM930006
VenHuizen AccuVac Kits
Product ID
AVC020000
AVC020560
Description
AccuVac Kit, all John Deere except Pro-Series
AccuVac Kit, John Deere Pro-Series
Product ID
AVC020100
AVC020660
AVC021100
AVC021200
AVC030001
BMP001775
PPM930015
PPM930004
Description
Singulator Kit, all John Deere except Pro-Series
Singulator Kit, Pro-Series
Package of 4, Seed Guide Kit
Package of 6, Seed Guide Kit
Replacement AccuVac Seed Plate
Graphite, 1-lb. bottle
Graphite, 5lb. jug
Efl w, 80% graphite, 20% talc, 8-lb. container
Dispenser lid, works with 8-lb. jugs of Precision Planting eFlow & talc; CNH 8-lb. talc/graphite & graphite; EZ Slide 8-lb. talc; Rural King
8-lb. talc/graphite. Does NOT fit John eere containers.
PPM930006
Price
$65.00
$75.00
VenHuizen AccuVac Service Parts
Price
$35.00
$45.00
$20.00
$30.00
$29.95
$5.95
$18.95
$25.95
$8.95
PRECISION PLANTING eSET
•.Selecting the eSet meter is a no-brainer. It has a fl t disk with a single vac setting,
eliminating constant adjustments. It releases seeds down the center of the tube – critical to
optimum spacing. It has a 5-lobed singulator that makes sure no two seeds of any kind can
occupy the same hole. One seed locks in and one seed drops. Every time. eSet is a star of
simplicity. It handles any seed size or shape without finic y tweaks to vac pressure, disk or
singulator settings. Just pour in the seed and go. Then get ready for your best possible yield.
A simple replacement for OEM vacuum disks on John Deere planters. You get the disk, baffle,
singulator, brushes and seed extractor. Everything mounts to your existing meter housing
(1991 or later).
•.Our standard model fits John eere vacuum planters that use standard sized hoppers.
Our Deere ProSeries Meter model fits acuum planters that have the mini-hopper used in
planters with the central hopper. MaxEmerge 5 now available. All components mount to
your existing meter housing, simply.
Product ID
PPM720196
PPM720206
PPM720244
PPM720245
PPM720248
Precision Planting eSet Pro-Series Options
Description
Step Kit, JD 1790 with 20” rows. Moves OEM steps out & away from ProFlo hoppers.
Elbow Kit, JD 1790 with 15” or 30” rows. Reroutes supply tube to ProFlo hopper on 4 center rows .
Flap Kit, JD 1790 with 15” or 20” rows. Prevents seed from fl wing out of hopper when folded. 4 rows.
Y-Tube Kit, Deere Bauer 32-rows or more. One kit required for each row over 32.
Stop Kit, JD 1790 with 15” split rows. Limits over extension of parallel arms. 4 rows.
800.368.7773
Price
$125.00
$28.00
$12.50
$36.00
$78.00
PRECISION PLANTING eSET
PPM720242 eSet Standard Service Parts
KEY
1
2
3
4
5
6
7
8
9
10
11
12
Product ID
PPM720242
PPM720003
PPM720149
PPM720230
PPM720012
N/A
PPM720023
N/A
PPM720185
PPM720235
PPM720033
PPM720045
Description
Complete eSet Kit
Disk
Liner
Singulator Assembly
Long brush holder
Long brush* *
Short brush holder
Short brush**
Fragment Extractor
Vent
Wedge
T-Shaped Retainer
**
PPM720061
Brush Kit (4pk. of long & short)
Price
$122.00
$45.00
$8.10
$45.00
$4.15
N/A
$2.75
N/A
$5.00
$6.00
$1.30
$1.95
$18.25
PPM720136 eSet Pro Series Service Parts
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Product ID
PPM720136
PPM720003
PPM720176
PPM720230
PPM720209
PPM720023
N/A
N/A
PPM720067
PPM720185
PPM720177
PPM720246
PPM720225
PPM720252
Description
Complete eSet Kit
Disk
Liner
Singulator Assembly
Mini Hopper
Short brush holder
Short brush **
Long brush**
Singulator Shim
Fragment Extractor
Vent
D-Tube assembly, spring steel
Vented hopper L
Foam Gasket
Price
$136.00
$45.00
$8.10
$45.00
$19.00
$2.75
N/A
N/A
$1.30
$5.00
$5.50
$8.75
$9.00
$1.50
**
PPM720061
PPM720270
D-Tube assembly
$18.25
$10.00
PPM720370 eSet MaxEmerge 5 Service Parts
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Product ID
PPM720370
PPM720003
PPM720149
PPM720372
PPM720371
N/A
PPM720023
N/A
PPM720185
PPM720235
PPM720374
PPM720033
PPM720045
PPM720377
PPM720378
Description
Complete eSet Kit
Disk
Liner
Singulator Assembly
Long brush holder
Long brush* *
Short brush holder
Short brush**
Fragment Extractor
Vent
Shim
Wedge
T-Shaped Retainer
Hardware Kit (standard)
Hardware Kit
**
PPM720061
Product ID
PPM720003
PPM720061
PPM720185
PPM720230
PPM720268
PPM730169
Precision Planting eSet Service Parts
PPM720242 eSet Standard
Max Emerge 2, Plus, XP with single seed inlet
PPM720136 eSet Pro Series
Max Emerge Pro, XP Pro
PPM720370 eSet MaxEmerge 5
Price
$136.00
$45.00
$8.10
$45.00
$5.50
N/A
$2.75
N/A
$5.00
$6.00
$5.50
$1.30
$1.95
$1.00
$1.00
$18.25
Description
Seed Disk, 30-cell corn, .176”
Brush Kit, includes 4 long and 4 short brushes.
Fragment Extractor
Singulator Assembly
Seed Defle tor Kit, includes 4 liner springs and 4 screws.
30” Vacuum Gauge with Filter
Price
$45.00
$18.25
$5.00
$45.00
$3.00
$100.00
www.sidist.com
17
PRECISION METER
Better Seed Spacing for More Harvestable Ears
At 5 mph on 30-inch rows, your meter is turning at 65 rpm. At that speed, precision matters. Springs, finger ,
cams, backing plates, belts, housings, covers, brushes, bearings – everything must work together to get seed
to the ground every 6.8 inches.
In the Precision Meter, everything does work together. Every part is precisely designed, engineered and
manufactured to work with every other part. So every 6.8 inches, it plants one seed. Compared to ordinary,
less precise meters, this instantly produces more ears, 6+ bushels more, from every acre.
At $4.00 per bushel, that’s $24.00 per acre. No wonder many top producers are upgrading to Precision Meters
or ordering new planters without meters and adding Precision Meters.
When everything works
together, every seed ends up
where it belongs, producing
picket fence stands, maximum
yields and an extra $36 per
acre for you.
Please reference chart on
pages 18-19 to identify
correct seed tube
applications.
Product ID
PPM343022
PPM343072
PPM343063
PPM343113
PPM343116
PPM343110
Description
Precision Meter, field orn, 12-finger
Precision Meter, sweet corn, 12-finger
Precision Meter, popcorn, 12-finger
Precision Meter, pumpkin, 6-finger
Precision Meter, sunfl wer, 12-finger
PPM343025
PPM343099
PPM343101
PPM343114
PPM343117
PPM343111
PPM343030
PPM343071
PPM343109
PPM343112
PPM343115
PPM343105
Precision Meters
Make/Model
John Deere 7000, 7100; Kinze 2000 series
Price
$180.00
$184.00
$210.00
$210.00
$210.00
$240.00
John Deere 7200, 7300, 1700 series
$180.00
$184.00
$195.00
$210.00
$210.00
$240.00
Precision Meter, field orn, 12 finger
Kinze 3000 series
Kinze 3000 series
Kinze 3000 series
Kinze 3000 series
Kinze 3000 series
Kinze 3000 series
$180.00
$184.00
$195.00
$210.00
$210.00
$240.00
PPM343050 Precision Meter, field orn, 12-finger
PPM343051 Precision Meter, field orn, 6-finger
PPM343055 Precision Meter, sunfl wer, 12-finger
Great Plains planters
$180.00
$180.00
$240.00
Product ID
PPM345020
PPM345021
PPM345022
Description
Precision Meter (PPM343022) & Bullseye (PPM700150)
Make/Model
Kinze 3000 series
Price
$188.50
$188.50
$188.50
Product ID
PPM345026
PPM345027
PPM345028
Description
Make/Model
Precision Meter (PPM343022) & Wave Vision (PPM700250) John Deere 7000, 7100; Kinze 2000 series
Precision Meter (PPM343025) & Wave Vision (PPM700200) John Deere 7200, 7300, 1700 series
Precision Meter (PPM343030) & Wave Vision (PPM700250) Kinze 3000 series
Note: For planters with Keeton Seed Firmers the new WaveVision fi mer tail is required.
Price
$307.00
$307.00
$307.00
Precision Meter & Universal Bullseye Seed Tube Kits Save $8.00 per row
Precision Meter & Wave Vision Seed Tube Kits Save $13.00 per row
The Precision Meter contains the following parts:
Precision Finger Set – The shape and design of the finger de ermines how well it can singulate and hold a single seed – round or fl t. The Precision Finger Set’s
unique finger shape locks both flat and round seeds under the flag or secure delivery to the seed belt.
Population Max Backing Plate – The special Kevlar® impregnated poly backing plate presents a fl tter more consistent platform for the Precision Finger Set. Its
exclusive metal wear strip delivers far longer life than metal plates. Interchangeable inserts let you make adjustments for varying seed sizes and shapes.
Adjustable Brush – For the first tim , with just a set screw, you can change the aggressiveness of your meter. Set the brush toward the outside of the finger or
large seeds so they don’t dislodge. Set the brush further inside the finger or small seeds so it can aggressively remove doubles.
SkipStop – With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pic -up meters.
When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube.
SureFire Seed Belt – A seed released down the center of the tube can catch up with one bouncing around because it was released off o the side. That leaves
two seeds in one spot and none in the next, a virtual skip/ double. The new SureFireTM cupped seed belt releases down the center every time for sure spacing
and more ears.
800.368.7773
PRECISION METER PARTS
Precision Finger Set
The shape and design of the finger de ermines how well it can singulate and hold a single seed – round
or fl t. The Precision Finger Set’s unique finger shape locks both flat and round seeds under the flag or
secure delivery to the seed belt.
Product ID
PPM343029
PPM343053
PPM343064
PPM343065
PPM343067
PPM343104
Description
Precision Finger set, 12-finge , corn
Precision Finger set, 6-finge , narrow row corn
Precision Finger set, 12-finge , sweet corn
Precision Finger set, 6-finge , pumpkin
Precision Finger set, 12-finge , sunfl wer
Precision Finger set, 12-finge , popcorn
Price
$35.00
$37.00
$57.00
$57.00
$135.00
$57.00
Precision Finger Set
Precision Population Max Backing Plate
The special Kevlar® impregnated poly backing plate presents a fl tter more consistent platform for the
Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeable
inserts let you make adjustments for varying seed sizes and shapes. Includes adjustable brush.
Product ID
PPM342103
PPM342111
PPM342110
PPM342107
PPM342108
Description
Precision Population Max Backing Plate with “A” insert & adjustable brush
Precision Population Max Backing Plate with “C” insert & brushless blank
Replacement “A” Insert, most field orn and larger popcorn
Replacement “B” Insert, fl t field orn with heavy seed treatment and small to medium popcorn
Replacement “C” Insert, sunfl wer, sweet corn and edible beans
Price
$38.00
$38.00
$7.00
$7.00
$7.00
Population Max
Backing Plate
Precision Brushes
For the first tim , with just a set screw, you can change the aggressiveness of the Precision meter. Set the
brush toward the outside of the finger or large seeds so they don’t dislodge. Set the brush further inside
the finger or small seeds so it can aggressively remove doubles.
Product ID
PPM343052
PPM343049
PPM343060
Description
Precision Adjustable Brush
Pkg of 2, Precision Maroon Brush, Non-Adjustable, for Precision Population Max plate
T-Handle for Adjustable Brush
Price
$10.00
$5.50
$4.25
Adjustable Brush
Precision SkipStop Cover
With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips
that you see in other finger pic -up meters. When seeds hit the cushion, they drop directly onto the seed
belt for delivery to the seed tube. Includes cushion.
Product ID
PPM343024
PPM343014
PPM343073
Description
Precision SkipStop Cover, with cushion, all except Great Plains
Replacement SkipStop Cushion
Replacement SkipStop Cushion, Great Plains
Precision SureFire Seed Belt
The new SureFire™ cupped seed belt releases seed down
the center every time for sure spacing and more ears.
Price
$23.00
$16.50
$17.00
Product ID Description
PPM343066 Precision SureFire Seed Belt
SkipStop Cover
Price
$14.00
Meter Re-Power Plus Kit
Includes: Precision Finger Set, Population Max Backing Plate with Adjustable Brush, Skipstop Cover,
SureFire Seed Belt, Bullseye Seed Tube and T-Handle for Adjustable Brush.
Precision Re-Power Kits Save $5.25 Per Row
PPM345024 Precision Re-Power Kit, John Deere 7000, 7100; Kinze with PPM700150 Bullseye
PPM345025 Precision Re-Power Kit, John Deere 7200, 7300, 1700 series with PPM700160 Bullseye
Please reference chart on pages 10-11 to identify correct seed tube applications.
Product ID
PPM343062
PPM343098
PPM343102
BMP001775
PPM930015
PPM930004
Miscellaneous Service Parts
Description
Drive Wheel for seed belt
Cover for Precision Meter, John Deere 7000, Kinze 2000
Ash Tray, finger holde
Graphite, 1-lb. bottle
Graphite, 5-lb. jug
Efl w, 80% graphite, 20% talc, 8-lb. container
Dispenser lid, works with 8-lb. jugs of Precision Planting eFlow & talc;
PPM930006 CNH 8-lb. talc/graphite & graphite; EZ Slide 8-lb. talc; Rural King 8-lb.
talc/graphite. Does NOT fit John eere containers.
Price
$125.50
$125.50
SureFire Seed Belt
Price
$6.50
$8.90
$8.00
$5.95
$18.95
$25.95
$8.95
BMP001775
PPM930004
PPM930006
www.sidist.com
19
WAVEVISION SEED TUBE
Better information in. Better information out.
For measuring population, seed spacing, skips and doubles, you depend on the
accuracy of your seed sensors. But optical sensors have four big problems:
•
•
•
•
Dust looks just like seeds
Doubles look like singles
Dust coats the eyes
They mount at the middle of the seed tube
Because optical sensors use light beams, they are susceptible to all the things that can falsely break that beam. That’s why dust is such a problem. Dust that blows up the seed tube looks like seed. So the optical sensor routinely over counts seeds, which undercuts your population. Of
course there are times when you can tell dust is the issue – when you’re planting with the wind and your population spikes ten or twenty thousand seeds. But more harmful impact is the day-in day-out over reporting of seeds because of dust.
And then there is the problem of dust coating the sensor eyes and failing all together. Optical sensors must be mounted at the middle of the
seed tube in order to keep them out of the dust. But most of the seed-delaying seed tube bounce happens in the lower part of the tube. So you
really don’t have a good idea of seed spacing with an optical sensor.
And finall , optical sensors look at the surface of the seed – just the plane that breaks
the beam. So, two seeds (a double) that move along the seed tube
together will be reported as a single seed, again under reporting
the actual population and accurate numbers.
WaveVision eliminates these problems and provides good
clean information to your monitor.
High frequency radio waves, rather
than light, engulf seeds so that
you get a “three-dimensional”
look at seeds. It sees mass, not
shape. So doubles look like
doubles. The radio waves
also see through dust. And
that means we can mount
the seed sensor where it
belongs, at the bottom of
the seed tube.
Optical sensors can’t distinguish dust and
debris from seeds. WaveVision can, and gives
you an accurate count.
WaveVision Seed Tubes
Product ID
Description
Make/Model
PPM700200 WaveVision Seed Tube
John Deere 7200, 7300, 1700 series including MaxEmerge 5
Seed Tube Opening
Price
3” x 2-1/4”
$140.00
John Deere 7000, 7100; Kinze; Great Plains Yield Pro
2-1/4” x 1-1/2”
$140.00
White 5000, 6000, 8000, 9000 series
2-1/4” x 1-1/2”
$140.00
Monosem
2-1/4” x 1-1/2”
$140.00
Case-IH 1200 series (2009+ & vSet only)
3” x 2”
$150.00
PPM700266 WaveVision Power Module Planters without 2020 SeedSense
Note: For planters without Precision Planting’s 2020 SeedSense a power module is required.
See page 10 for Seed Tube Mounting Accessories
Not compatible with these monitors:
AGCO GTA, KPM I, II or III, Kinze Vision, Monosem MPM, SM400SE and GTA.
800.368.7773
$300.00
BULLSEYE SEED TUBE
Seed Tube Bounce or Ricochet Can Ruin the Best Meter Singulation.
Every time a seed hits the seed tube wall it slows down. Slow seeds lead to erratic spacing, causing the familiar skip/
double pattern that leads to lost yields.
It happens because ordinary seed tubes have catch points that interfere with the seed’s descent. So we eliminated them. In our
new BullsEye seed tube, we moved the sensor out of the way - offset it just enough so that it won’t snag the seed. So there’s
nothing in the way of a smooth, consistent ride down the tube. And we made that tube out of a special nylon that speeds the seed
on its way.
We also eliminated the biggest wear issue with seed tubes: the way openers wear away their tips. That not only shortens the tube’s
life, it leads to spotty spacing because seeds scatter when they hit that worn spot. Tungsten carbide tips insure that the BullsEye
will long outlast ordinary seed tubes. Your replacement costs will plummet.
Offset Sensor to Reduce
Seed Catchpoints
Redesigned Tip for Less Wear
• Bullseye (left)
• Conventional (right)
Not Available Not Available
Make
Case-IH
Bullseye Seed Tubes
Model
All
Seed Tube Opening Notes
Price
PPM700150
Bullseye Seed Tube Great Plains Yield Pro Planters
2-1/4” x 1-1/2”
$16.50
PPM700150
PPM700150
PPM700160
Bullseye Seed Tube
7000, 7100 series
Bullseye Seed Tube
7200, 7300 series
Bullseye Seed Tube John Deere 7200, 7300 series
2-1/4” x 1-1/2”
2-1/4” x 1-1/2”
3” x 2-1/4”
PPM700160
Bullseye Seed Tube
1700 series
3” x 2-1/4”
$16.50
$16.50
Model year -2006 requires PPM700137 $16.50
Model year 2007- requires PPM700167
$16.50
Fits MaxEmerge 5 row units
PPM700150
PPM700150
PPM700160
Bullseye Seed Tube
Bullseye Seed Tube Kinze
Bullseye Seed Tube
2000 series
3000 series
3000 series
2-1/4” x 1-1/2”
2-1/4” x 1-1/2”
3” x 2-1/4”
PPM700158
Bullseye Seed Tube Monosem
All
2-1/4” x 1-1/2”
PPM700155
PPM700155
PPM700155
PPM700155
Bullseye Seed Tube
5100 series
2-1/4” x 1-1/2”
Modific tion required
Bullseye Seed Tube
6000 series
2-1/4” x 1-1/2”
White
Bullseye Seed Tube
8000 series
2-1/4” x 1-1/2”
Bullseye Seed Tube
9000 series
2-1/4” x 1-1/2”
Bullseye Seed Tubes accept 1/2” and 3/4” diameter sensors
Except EdgeVac or KPM III sensors
$16.50
$16.50
$16.50
$16.50
$16.50
$16.50
$16.50
$16.50
Seed Tube Mounting Accessories
Product ID
Description
Price
PPM700137
Pkg of 4, pin & clip for John Deere 7200, 1700 series model year
-2006.
For Bullseye seed tubes on planters with mounting holes in
shank. Pin is 1/4” x 2-5/8” long.
$6.00
PPM700167
Pkg of 4, spring pin for John Deere 7200, 1700 series model year
2007For Bullseye seed tubes on planters without mounting holes in
shank
$12.00
Bullseye Advantages:
• Reduces seed tube bounce
• Reduces excessive wear
www.sidist.com
21
S.I. BELT METER
The First Signifi ant Technology Change In Grain Drill Meters In Decades
Features:
• The S.I. Belt Meter allows the operator to seed with one
setting at a determined rate of fl w for most seed sizes
• A regular even rate of seed fl wing from the meter at all times
• Seed damage at the meter is greatly reduced or eliminated
• There is a positive setting by adjusting meter speed
• The fl w rate remains constant up to 10 mph
• Plants soybeans, wheat and oats
Case-IH Transmission
Benefits
• You save money due to no over seeding
• You make money due to no under seeding
• Any variation in seeding rate is eliminated
Information:
Great Plains Transmission
Now you can plant the seed population per acre you
choose without guessing. Accurate population control is
possible even on large seed crops such as soybeans. The S.I.
Belt Meter, when mounted on a grain drill, will singulate the
seed and maintain accurate population control over a wide
range of seed sizes (2,000 to 4,000 actual seeds per pound).
The S.I. Belt Meter is designed to primarily plant the following crops:
Soybeans at 2,000 to 4,000 actual seeds per pound, wheat and oats. The S.I. Belt Meter
is not designed (and does not work well) on crops planted at low rate or of a nonsymmetrical shape such as milo/sorghum, corn, sunfl wer, cotton and edible beans.
Any guess work in setting rate is eliminated. For most seed sizes, the meter will plant your seed
at the rate you establish.
John Deere Transmission
The conversion pays for itself through seed savings and virtually eliminating seed damage.
The S.I. Belt Meter adapts to most John Deere, Great Plains and Case-IH grain drills.
S.I. BELT METER KITS
All kits include:
• S.I. Belt Meter for each opener
• Transmission conversion kit(s)
• New seed charts
• Installation instructions
• Extra belt meter, cutoff brush,
cotter pin
Each Kit
Includes An Extra
Belt Meter, Cutoff
Brush & Cotter Pin!
Call For Pricing And Availability Of Makes And Models Not Listed.
Important: The S.I. Belt Meter is not designed nor will it work properly when planting soybeans
that are larger than 2,000 actual seeds per pound. Soybeans must be properly graded so as to
not contain soybeans that are larger than 2,000 actual seeds per pound.
Larger beans such as tofu and edible beans generally will not work with the S.I. Belt Meter
because of the size of the bean.
800.368.7773
Each Kit
Includes An Extra
Belt Meter, Cutoff
Brush & Cotter Pin!
John Deere Belt Meter Kits
Product ID
Description
BMK12560455
Belt Meter Kit-JD455 25’ 6”
Make
Model
Width
Spacing
Meters
Drives
Lift Kit
Price
John Deere
455
25’
6”
49
2
0
$4,696.00
BMK12575455
Belt Meter Kit-JD455 25’ 7.5”
John Deere
455
25’
7.5”
40
2
0
$4,029.00
BMK12510455
John Deere
455
25’
10”
30
2
0
$3,292.00
BMK12515455
John Deere
455
25’
15”
20
2
0
$2,555.00
BMK13060455
John Deere
455
30’
6”
60
3
0
$6,044.00
BMK13075455
John Deere
455
30’
7.5”
48
3
0
$5,160.00
BMK13010455
John Deere
455
30’
10”
36
3
0
$4,275.00
BMK13015455
John Deere
455
30’
15”
24
3
0
$3,391.00
BMK13575455
John Deere
455
35’
7.5”
56
3
0
$5,749.00
BMK13510455
John Deere
455
35’
10”
42
3
0
$4,717.00
BMK11075750
John Deere
750
10’
7.5”
16
1
0
$1,720.00
$1,425.00
BMK11010750
John Deere
750
10’
10”
12
1
0
BMK11015750
John Deere
750
10’
15”
8
1
0
$1,130.00
BMK11575750
John Deere
750
15’
7.5”
24
1
0
$2,310.00
BMK11510750
John Deere
750
15’
10”
18
1
0
$1,867.00
BMK11515750
John Deere
750
15’
15”
12
1
0
$1,425.00
BMK12075750
John Deere
750
20’
7.5”
32
2
0
$3,440.00
BMK12010750
John Deere
750
20’
10”
24
2
0
$2,850.00
BMK12015750
John Deere
750
20’
15”
16
2
0
$2,260.00
BMK13075750
John Deere
750
30’
7.5”
48
2
0
$4,619.00
BMK13010750
John Deere
750
30’
10”
36
2
0
$3,735.00
BMK13015750
John Deere
750
30’
15”
24
2
0
$2,850.00
BMK115751520
John Deere
1520
15’
7.5”
24
1
0
$2,310.00
BMK120751520
John Deere
1520
20’
7.5”
32
2
0
$3,440.00
BMK120101520
John Deere
1520
20’
10”
24
2
0
$2,850.00
BMK115151530
John Deere
1530
15’
15”
12
1
0
$1,425.00
BMK120151530
John Deere
1530
20’
15”
16
1
0
$1,720.00
BMK110751560
John Deere
1560
10’
7.5”
16
1
0
$1,720.00
BMK110151560
John Deere
1560
10’
15”
8
1
0
$1,130.00
BMK115751560
John Deere
1560
15’
7.5”
24
1
0
$2,310.00
BMK115101560
John Deere
1560
15’
10”
18
1
0
$1,867.00
BMK115151560
John Deere
1560
15’
15”
12
1
0
$1,425.00
BMK120751560
John Deere
1560
20’
7.5”
32
2
0
$3,440.00
BMK120101560
John Deere
1560
20’
10”
24
2
0
$2,850.00
BMK120151560
John Deere
1560
20’
15”
16
2
0
$2,260.00
BMK130751560
John Deere
1560
30’
7.5”
48
2
0
$4,619.00
BMK130101560
John Deere
1560
30’
10”
36
2
0
$3,735.00
BMK130151560
John Deere
1560
30’
15”
24
2
0
$2,850.00
BMK110751590
John Deere
1590
10’
7.5”
16
1
0
$1,720.00
BMK110151590
John Deere
1590
10’
15”
8
1
0
$1,130.00
BMK115751590
John Deere
1590
15’
7.5”
24
1
0
$2,310.00
BMK115101590
John Deere
1590
15’
10”
18
1
0
$1,867.00
BMK115151590
John Deere
1590
15’
15”
12
1
0
$1,425.00
BMK120751590
John Deere
1590
20’
7.5”
32
2
0
$3,440.00
BMK120101590
John Deere
1590
20’
10”
24
2
0
$2,850.00
BMK130751590
John Deere
1590
30’
7.5”
48
2
0
$4,619.00
BMK130101590
John Deere
1590
30’
10”
36
2
0
$3,735.00
BMK130151590
John Deere
1590
30’
15”
24
2
0
$2,850.00
Continued on next page
www.sidist.com
23
Each Kit
Includes An Extra
Belt Meter, Cutoff
Brush & Cotter Pin!
Great Plains Belt Meter Kits*
Product ID
Description
BMK212601200
Belt Meter Kit-GP1200 12’ 6”
Make
Model
Width
Spacing
Meters
Drives
Lift Kit
Price
Great Plains
1200
12’
6”
24
1
0
$2,310.00
BMK212701200
Great Plains
1200
12’
7”
20
1
0
$2,015.00
BMK212751200
Belt Meter Kit-GP1200 12’ 7.5”
Great Plains
1200
12’
7.5”
19
1
0
$1,944.00
BMK212801200
Great Plains
1200
12’
8”
18
1
0
$1,867.00
BMK212101200
Great Plains
1200
12’
10”
14
1
0
$1,572.00
BMK212701205
Great Plains
1205
12’
7”
20
1
0
$2,015.00
BMK212701210
Great Plains
1210
12’
7”
20
1
1
$2,179.00
BMK212751210
Great Plains
1210
12’
7.5”
19
1
1
$2,108.00
BMK212801210
Great Plains
1210
12’
8”
18
1
1
$2,031.00
BMK212101210
Great Plains
1210
12’
10”
14
1
1
$1,736.00
BMK215601500
Great Plains
1500
15’
6”
30
1
0
$2,752.00
BMK215701500
Great Plains
1500
15’
7”
26
1
0
$2,457.00
BMK215751500
Great Plains
1500
15’
7.5”
24
1
0
$2,310.00
BMK215801500
Great Plains
1500
15’
8”
22
1
0
$2,162.00
BMK215101500
Great Plains
1500
15’
10”
18
1
0
$1,867.00
BMK215151500
Great Plains
1500
15’
15”
12
1
0
$1,425.00
BMK215161500
Great Plains
1500
15’
16”
12
1
0
$1,425.00
BMK215701510
Great Plains
1510
15’
7”
26
1
1
$2,621.00
BMK215751510
Great Plains
1510
15’
7.5”
24
1
1
$2,473.00
BMK215801510
Great Plains
1510
15’
8”
22
1
1
$2,326.00
BMK215101510
Great Plains
1510
15’
10”
18
1
1
$2,031.00
BMK220602000
Great Plains
2000
20’
6”
40
2
0
$4,029.00
BMK220702000
Great Plains
2000
20’
7”
34
2
0
$3,587.00
BMK220752000
Great Plains
2000
20’
7.5”
32
2
0
$3,440.00
BMK220802000
Great Plains
2000
20’
8”
30
2
0
$3,292.00
BMK220102000
Great Plains
2000
20’
10”
24
2
0
$2,850.00
BMK220142000
Great Plains
2000
20’
14”
17
2
0
$2,337.00
BMK220152000
Great Plains
2000
20’
15”
16
2
0
$2,260.00
BMK220702010
Great Plains
2010
20’
7”
34
2
1
$3,751.00
BMK220752010
Great Plains
2010
20’
7.5”
32
2
1
$3,604.00
BMK220802010
Great Plains
2010
20’
8”
30
2
1
$3,456.00
BMK220102010
Great Plains
2010
20’
10”
24
2
1
$3,014.00
BMK220152015
Great Plains
2015
20’
15”
16
2
0
$2,260.00
BMK224602400
Great Plains
2400
24’
6”
48
2
0
$4,619.00
BMK224702400
Great Plains
2400
24’
7”
40
2
0
$4,029.00
BMK224752400
Great Plains
2400
24’
7.5
38
2
0
$3,882.00
BMK224802400
Great Plains
2400
24’
8”
36
2
0
$3,735.00
BMK224102400
Great Plains
2400
24’
10”
28
2
0
$3,145.00
BMK224152400
Great Plains
2400
24’
15”
19
2
0
$2,484.00
BMK224752410
Great Plains
2410
24’
7.5”
38
2
1
$4,046.00
BMK224802410
Great Plains
2410
24’
8”
36
2
1
$3,898.00
BMK224102410
Great Plains
2410
24’
10”
28
2
1
$3,309.00
BMK224152410
Great Plains
2410
24’
15”
19
2
1
$2,648.00
BMK230753010
Great Plains
3010
30’
7.5”
48
2
1
$4,783.00
BMK230803010
Great Plains
3010
30’
8”
44
2
1
$4,488.00
BMK230103010
Great Plains
3010
30’
10”
36
2
1
$3,898.00
Continued on next page
800.368.7773
Each Kit
Includes An Extra
Belt Meter, Cutoff
Brush & Cotter Pin!
Great Plains Belt Meter Kits* - Continued
Product ID
Description
Make
Model
Drives
Lift Kit
Price
BMK230153010
Great Plains
3010
Width Spacing Meters
30’
15”
24
2
1
$3,014.00
BMK224752SF24
Belt Meter Kit-GP2SF24 24’ 7.5”
Great Plains
2SF24
24’
7.5”
38
2
0
$3,882.00
BMK212603PD12
Belt Meter Kit-GP3PD12 12’ 6”
Great Plains
3PD12
12’
6”
24
1
0
$2,310.00
BMK212703PD12
Great Plains
3PD12
12’
7”
20
1
0
$2,015.00
BMK212753PD12
Belt Meter Kit-GP3PD12 12’ 7.5”
Great Plains
3PD12
12’
7.5”
19
1
0
$1,944.00
BMK212803PD12
Great Plains
3PD12
12’
8”
18
1
0
$1,867.00
BMK212103PD12
Great Plains
3PD12
12’
10”
14
1
0
$1,572.00
BMK214083PD14
Great Plains
3PD14
14’
8”
20
1
0
$2,015.00
BMK214083PD14-1
Belt Meter Kit-GP3PD14 14’ 8” W/MARKERS
Great Plains
3PD14
14’
8”
20
1
0
$2,015.00
BMK215603PD15
Great Plains
3PD15
15’
6”
30
1
0
$2,752.00
BMK215703PD15
Great Plains
3PD15
15’
7”
26
1
0
$2,457.00
BMK215703PD15-1
Great Plains
3PD15
15’
7”
26
1
0
$2,457.00
BMK215753PD15
Great Plains
3PD15
15’
7.5”
24
1
0
$2,310.00
BMK215753PD15-1
Belt Meter Kit-GP3PD15 15’ 7.5” W/MARKERS
Great Plains
3PD15
15’
7.5”
24
1
0
$2,310.00
BMK215803PD15
Great Plains
3PD15
15’
8”
22
1
0
$2,162.00
BMK215803PD15-1
Great Plains
3PD15
15’
8”
22
1
0
$2,162.00
BMK215103PD15
Great Plains
3PD15
15’
10”
18
1
0
$1,867.00
BMK215153PD15
Great Plains
3PD15
15’
15”
12
1
0
$1,425.00
BMK220753PD20
Great Plains
3PD20
20’
7.5”
32
2
0
$3,440.00
BMK220803PD20
Great Plains
3PD20
20’
8”
30
2
0
$3,292.00
BMK220803PD20-1
Great Plains
3PD20
20’
8”
30
2
0
$3,292.00
BMK220103PD20-1
Great Plains
3PD20
20’
10”
24
2
0
$2,850.00
BMK220153PD20
Great Plains
3PD20
20’
15”
16
2
0
$2,260.00
BMK230702SF30
Belt Meter Kit-GP2SF30 30’ 7”
Great Plains
SF30
30’
7”
52
2
0
$4,914.00
BMK24580SS45
Belt Meter Kit-GPSS45 45’ 8”
Great Plains
SS45
45’
8”
66
3
0
$6,044.00
BMK23075SS87
Belt Meter Kit-GPSS’87 30’ 7.5”
Great Plains
SS87
30’
7.5”
48
2
0
$4,619.00
BMK23015SS87
Belt Meter Kit-GPSS’87 30’ 15”
Great Plains
SS87
30’
15”
24
2
0
$2,850.00
Case-IH Belt Meter Kits
Product ID
Description
Make
Model
Width
Spacing
Meters
Drives
Lift Kit
Price
BMK415705400
Belt Meter Kit-CIH5400 15’ 7”
Case IH
5400
15’
7”
26
1
0
$2,457.00
BMK415755400
Belt Meter Kit-CIH5400 15’ 7.5”
Case IH
5400
15’
7.5”
24
1
0
$2,310.00
BMK415805400
Case IH
5400
15’
8”
22
1
0
$2,162.00
BMK415105400
Case IH
5400
15’
10”
18
1
0
$1,867.00
BMK415155400
Case IH
5400
15’
15”
12
1
0
$1,425.00
BMK420705400
Case IH
5400
20’
7”
34
2
0
$3,587.00
BMK420755400
Case IH
5400
20’
7.5”
32
2
0
$3,440.00
BMK420805400
Case IH
5400
20’
8”
30
2
0
$3,292.00
BMK420105400
Case IH
5400
20’
10”
24
1
0
$2,310.00
BMK420205400
Case IH
5400
20’
20”
12
1
0
$1,425.00
BMK430705500
Case IH
5500
30’
7”
52
2
0
$4,914.00
BMK430755500
Case IH
5500
30’
7.5”
48
2
0
$4,619.00
BMK430105500
Case IH
5500
30’
10”
36
2
0
$3,735.00
BMK415155400-11
Belt Meter Kit-CIH5400 SS 15’ 15”
Case IH
5400SS
15’
15”
11
1
0
$1,354.00
BMK415155400-12
Case IH
5400SS
15’
15”
12
1
0
$1,425.00
BMK420155400-14
Case IH
5400SS
20’
15”
14
1
0
$1,572.00
BMK420155400-15
Case IH
5400SS
20’
15”
15
1
0
$1,649.00
BMK420155400-16
Case IH
5400SS
20’
15”
16
1
0
$1,720.00
BMK430155500
Case IH
5500SS
30’
15”
24
2
0
$2,850.00
www.sidist.com
25
S.I. BELT METER PARTS
Key
1
2
3
7
8
6
5
4
10
11
9
S.I. Belt Meter Parts
Product ID
Description
BMP001000
BMP001005
BMP001500
BMP002000
BMP002005
BMP003000
BMP003005
BMP005000
BMP005001
BMP005002
BMP005003
BMP005004
BMP005005
BMP005008
BMP005009
BMP005011
BMP005012
BMP005013
BMP005014
BMP005015
BMP005016
BMP005018
BMP005022
Belt Meter, John Deere, complete
Retaining cap, John Deere (not shown); fits on op of meter
Belt Meter, clear, with handle, for display purposes only, complete
Belt Meter, Great Plains, angled top, complete
Retaining cap, angled top (not shown); fits on op of meter
Belt Meter, Great Plains, Case-IH, fl t top, complete
Retaining cap, Great Plains, Case-IH, fl t top (not shown); fits on op of meter
Meter housing, John Deere, right hand
Meter housing, John Deere, left hand
Meter housing, Great Plains, Case-IH, fl t top, left hand
Meter housing, Great Plains, Case-IH, fl t top, right hand
Meter housing, Great Plains, angled top, left hand
Meter housing, Great Plains, angled top, right hand
Seed belt
Brush, cutoff
Brush, drop
Drive sprocket
Spool
Lower idler
Screw, Phillips head, #10-24 x 1/2
Flange nut, #10-24
Cap, plastic, for grass seed tube (not shown)
Cotter pin, humped
S.I. Belt Meter Service Parts
BMP008151
Qty/Meter Price/Each
1
1
1
1
1
1
1
1
2
1
1
1
1
1
7
7
1
1
PPM930006
Price/Ea.
BMP001775 Graphite, 1-lb. bottle
BMP006169 Soybean Screen, used to accurately check seed size
Meter disassembly, inspection, repair & reassembly
BMP008100 (plus parts)
Meter fi ture, makes disassembly & reassembly of
BMP008151 meters easier
Dispenser lid, works with 8-lb. jugs of Precision
Planting eFlow & talc; CNH 8-lb. talc/graphite &
PPM930006
graphite; EZ Slide 8-lb. talc; Rural King 8-lb. talc/
graphite. Does NOT fit John eere containers.
$5.95
$17.50
PPM930015 Graphite, 5-lb. jug
$18.95
800.368.7773
$79.00
$7.20
$79.00
$79.00
$7.20
$79.00
$7.20
$11.85
$11.85
$11.85
$11.85
$11.85
$11.85
$5.95
$6.95
$9.95
$18.75
$3.25
$3.25
$0.12
$0.25
$0.60
$0.95
1
$8.00
$36.95
$8.95
BMP006169
BMP001775
ONE WRENCH
Adjusts John Deere 750 & 1850 Grain Drills
Depth Using Only One Hand and One Wrench
The unique design of the new One WrenchTM allows you to adjust the
depth of the John Deere 750 & 1850 Grain Drills
Product ID Description Price
with only one hand in one quick motion. The design
incorporates several pads that are used to depress
DRL010001
One Wrench
$59.95
the locking pin of the adjusting plate. Upon releasing
the locking pin you can adjust the grain drill to the desired depth. Patent No. 7249391
Works in Seconds - One Hand, One Motion
JOHN DEERE SEED BOOTS
DRL283730
DRL282788
DRL283731
DRL282789
DRL283432
Product ID
DRL280446
DRL280447
DRL282788
DRL282789
DRL283432
DRL283433
DRL283730
DRL283731
DRL280447
DRL283433
John Deere Drill Seed Boots
Product Description
Seed Boot, right hand
Seed Boot, left hand
Seed Boot, top right hand
Seed Boot, top left hand
Seed Boot, bottom right hand
Seed Boot, bottom left hand
Seed Boot, 1-piece right hand
For drills converted to the 1-piece seed boot
Seed Boot, 1-piece left hand
For drills converted to the 1-piece seed boot
Make
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
Model
750, 1850
750, 1850
1560, 1565, 1860
1560, 1565, 1860
1560, 1565, 1860
1560, 1565, 1860
Price
$26.75
$26.75
$15.50
$15.50
$15.00
$15.00
John Deere 1560, 1590, 1890
$33.00
John Deere 1560, 1590, 1890
$33.00
DRL280446
SURE MARK MARKER WEIGHT
Marker Weight For No-Till
SURE MARK is a 12-1/2 pound weight that simply bolts on the dish of your marker
disk. The additional weight of SURE MARK will assist the disk to cut a much deeper
furrow in No-Till planting. For extremely hard No-Till conditions, another weight can
be added.
Description
Price
Sure Mark
Please specify make, model and hub bolt pattern when ordering.
$39.95
When placing an order please measure the hub bolt pattern from center-to-center of
each bolt and the distance that the hub extends beyond the marker blade.
www.sidist.com
Longer bolts for installation are not included.
27
CLOSING WHEEL BRACKETS
Update Your John Deere And Kinze Planter For Quick And Easy Down Pressure Adjustment
Closing Wheel Bracket Kits
PLT120700
Closing Wheel Bracket Replacement Parts
Price
Closing Wheel Bracket, John
Deere 7000, 7100 with roll pin
attached wheels
$59.95
PLT120710
Closing Wheel Bracket, Kinze
1993 and earlier with roll pin
attached wheels
PLT120720
Closing Wheel Bracket, Kinze
1994 and newer with bolt-on
wheels
PLT120730
Deere 7000, 7100 converted to
bolt-on wheels.
Includes hardware kit to bolt
wheels on bracket.
$59.95
Deere 7200, 7300, 1700 converted to bolt-on wheels.
Includes hardware kit to bolt
wheels on bracket.
$59.95
PLT120740
$59.95
$59.95
Price
PLT120550
Eccentric bushing, for 1/8” ears, each
$2.39
PLT120650
Eccentric bushing, for 1/4” hardened ears, each
$5.95
PLT120660
Eccentric bushing, for hex style ears, each
$4.79
PLT120661
Hex step bushing, each
$1.89
PLT120750
T-handle, painted green, each
$8.95
PLT120753
T-handle, painted black, each
$8.95
PLT120751
Spring, each
$7.95
White 6000 Series Rebuild Kit
Product ID
Description
Price
PLT120618
Rebuild Kit, White 6000. Kit includes new bolton arms, eccentric bushings, hex bushings
and hardware.
$25.00
White 6000
Series Bracket
Note: Bolts to install bracket on planter and closing wheels are not included
V-CLOSING WHEEL CONVERSION
BRACKET
Product ID
PLT125001
V-Closing Wheel Bracket, White 5000 & 6000 Series Planters
Description
Bracket kit, to convert planter to v-closing
wheels
Includes shim washers for spacing wheels
to desired width
Will only fit pla ters if H-bracket arm is
straight and down pressure springs are on
the inside.
Price
$39.95
V-Closing Wheel Bracket, Case-IH 800 & 900 Series Planters
PLT125101
Case-IH Planter
White Planter
Bracket kit, to convert planter to v-closing
wheels
Includes shim washers for spacing wheels
to desired width
$79.95
Rebuilt John Deere
7200, 7300 Bracket
Rebuild Your OEM Closing
Wheel Bracket
S.I. Distributing offers a service to rebuild existing
John Deere V-Closing wheel brackets. The old
worn-out ears are cut off and new h x style ears
are welded on while in a jig
to insure proper alignment.
Closing Wheel Bracket Rebuild Service
Includes hex step bushings
Product ID
Description
and new eccentric bushings.
800.368.7773
Rebuilt John Deere
Cast Bracket
Price
PLT120610
Rebuild John Deere 7200, 7300 closing wheel bracket
$29.95
PLT120630
Rebuild John Deere 1700 cast closing wheel bracket
$29.95
PLT120640
Rebuild Kinze closing wheel bracket with bolt-on closing wheels
$29.95
Closing wheel bracket is sent to S.I. Distributing where the old worn-out ears are cut off and new h x style ears are
welded on in a jig to insure proper alignment. Price includes new eccentric bushings, hex step bushings and repainting.
CLOSING WHEELS
Rubber Closing Wheels
Product ID OEM#
Description
Make
Model
Price Each
PLT043899
AA43899
AA43899
GA3086
7074
12” Rubber closing wheel assembly
Water pump style bearing
Wheels attach with roll pin
John Deere planters
John Deere drills
Kinze planters
Monosem planters
MaxEmerge 7000, 7100
515, 520
1993 & prior
Early models
$31.95
PLT043898
AA43898
AA34211
Bearing ID = 17mm
Wheels slide over threaded stud
John Deere planters
John Deere drills
MaxEmerge 2; 7200, 7300, 1700
455, 750, 1520
$31.95
Bearing ID = 5/8”
Wheels attach with 5/8” bolt
John Deere planters
John Deere drills
Kinze planters
White planters
Case-IH air drills
Monosem planters
MaxEmerge Plus, Pro, XP, XP Pro, ME5
1530, 1535
1994 & newer
6000, 8000, 9000 series
SDX30, SDX40
Plus models
$31.95
AA39968
AA39968
GA6434
PLT039968
854262
87695406
7071.N
Cast Iron Closing Wheels
12” cast iron closing wheel
PLT110000 Water pump style bearing
PLT110010 Bearing ID = 17mm
Wheels slide on threaded stud
PLT110021 Bearing ID = 5/8”
Wheels attach with 5/8” bolts
Make
Model
Price Each
John Deere
Kinze
1993 & prior
$67.00
John Deere
MaxEmerge 2; 7200, 7300, 1700
$67.00
John Deere
Kinze
White
1994 & newer
6000, 8000, 9000
$67.00
Close-N-Till Cast Wheels
13” Close-N-Till Wheel
Description Description
Price Each
John Deere
Kinze
1993 & prior
$80.00
John Deere
MaxEmerge 2; 7200, 7300, 1700
$80.00
John Deere
Kinze
White
1994 & newer
6000, 8000, 9000
$80.00
Finger-Till Cast Wheels
15” Finger-Till Wheel
Description Description
Price Each
John Deere
Kinze
1993 & prior
$98.00
John Deere
MaxEmerge 7200, 7300, 1700
$98.00
John Deere
Kinze
White
1994 & newer
6000, 8000, 9000
$98.00
Closing Wheel Replacement Parts
Bearing. Water pump style bearing
PLT110001
1 bearing per wheel
PLT110002 Snap ring
Make
John Deere
Kinze
John Deere
Kinze
Bearing, outside. Bearing ID = 17mm
John Deere
1 outside & 1 inside bearing per wheel
Bearing, inside. Bearing ID = 17mm
PLT110022
John Deere
1 outside & 1 inside bearing per wheel
John Deere
Bearing. Bearing ID = 5/8”
PLT110250
Kinze
1 bearing per wheel
White
PLT110011
Model
1993 & prior
1993 & prior
Price
$16.50
$1.00
MaxEmerge 2; 7200, 7300, 1700
$7.50
MaxEmerge 2; 7200, 7300, 1700
$10.95
1994 & newer
6000, 8000, 9000
Comparison Weight
of Closing Wheels (each)
Rubber Wheel............................3.5 lbs.
13” Martin Spike Wheel....... 12.0 lbs.
15” Martin Spike Wheel....... 14.5 lbs.
Finger-Till Wheel.................... 16.2 lbs.
Close-N-Till Wheel................. 17.3 lbs.
Regular Cast Iron Wheel...... 23.0 lbs.
$7.95
www.sidist.com
29
DOWN PRESSURE
SPRING PACKAGE
Down Pressure Spring Kit
Product ID
Description
PLT141000
Down pressure spring kit, per row
$79.00
Price
PLT141001
Down pressure spring kit with plate, per row
Note: The spring kit with plate is for planter row units that
currently do not have a plate installed to hold the u-bolts
square and keep the parallel linkage arms from twisting.
$99.00
Product ID
Description
Price
PLT141010
Detent pin, 4 per kit, each
$3.89
PLT141011
Anchor, 4 per kit, each
$9.75
PLT141012
Spring, 4 per kit, each
$7.25
Down Pressure Spring Kit Components
Each package includes:
4 - Detent pins
4 - Anchors
4 - Heavy duty down pressure springs
This Package Equals or Exceeds Competitive Designs
in Down Force in the Normal Working Range.
PARALLEL ARMS
Product ID OEM #
PLT843820
Description
Upper parallel arm,
PLT762230 A76223
16” standard length
Upper parallel arm,
PLT615710 A61571
23” extended length
Lower parallel arm,
PLT520920 A52092
16” standard length
A84382, Lower parallel arm,
PLT843820
A65304 23” extended length
Parallel Arms
Make
John Deere planters
John Deere drills
John Deere planters
John Deere drills
John Deere planters
John Deere drills
John Deere planters
John Deere drills
Model
Price/Each
$19.95
$24.50
$114.95
$199.95
PLT762230
PARALLEL LINKAGE REBUILD KITS
For John Deere 7000, 7100 and
Kinze 2000, 3000 Series Planters
Benefits include
• Replaces worn bushings in parallel linkage for John Deere 7000, 7100 and Kinze Planters
• Oversized bushings last up to four times longer
• Special designed bolts have a shoulder so the bushings don’t wear on the bolt threads
• No need to replace parallel linkage because holes are enlarged to accept the new bushings
• Insures a precise fit o eliminate movement between the bushing and the bolt
• For John Deere 7000, 7100 and Kinze planters must drill out parallel linkage to 1-3/32”.
• For John Deere 7200, 7300, 1700 series planters no drilling is required. Kit includes same size
bushing as original.
Parallel Linkage Rebuild Kit
Product ID
PLT130100
Description
Parallel linkage rebuild kit, per row
Note: Will not work with parallel linkage mounted attachments
Product ID
PLT130101
PLT130102
PLT130103
PLT130104
Description
Bushing, 8 per kit, each
Bolt, 5/8-11 x 1-3/4, 6 per kit, each
Bolt, 5/8-11 x 2-1/4, 2 per kit, each
Nut, 5/8-11 lock, 8 per kit, each
Price
$29.95
Parallel Linkage Rebuild Kit Components
800.368.7773
Price
$1.95
$1.90
$2.10
$0.40
Kit includes:
• 8 oversized bushings
• 8 special shouldered grade 5 bolts
• 8 grade 5 locknuts
PLANTER REPLACEMENT
PARTS
Product ID OEM#
AA20242,
AA37474,
AA55927
PLT037474
GA8324
852063
PLT065248 AA65248
PLT061577
A41692
A61577
AA54755
GB0241
PLT080203 A80203
PLT054179
A54179,
A79647
PLT079648 A79648
Description
Double Disc Opener Assembly
15” diameter x 3.5mm thick
Includes blade, bearing, hub,
dust cap
Double Disc Opener Assembly
15” diameter x 3.5mm thick
Includes blade, bearing, hub,
dust cap
Seed Tube Guard
Seed tube guide welded to
guard
Seed Tube Guard
Seed tube guide welded to
guard
Gauge Wheel Arm
Gauge wheel arms mounts to
planter with 16mm x 100mm
bolt
Gauge wheel mounts to arm
with set screw
Gauge Wheel Arm
Gauge wheel arm mounts to
planter with 16mm x 100mm
bolt
with bolt
Planter Replacement Parts
Picture
Make
Model
MaxEmerge, MaxEmerge 2, MaxEmerge
John Deere Plus, MaxEmerge Pro
Kinze
All planters
White
6000 series
Price
$30.95
John Deere MaxEmerge XP, MaxEmerge XP Pro
$35.00
John Deere
All planters with curved seed tube except
XP
Kinze
All planters with curved seed tube except
3000 series
John Deere
MaxEmerge XP series row units with curved
seed tube
John Deere
1700 series with MaxEmerge Plus & Pro
row units
$23.25
John Deere
1700 series with MaxEmerge XP & XP Pro
row units
$23.25
$8.95
$8.95
PLT154179 A57058
Self Aligning Bushing, 16mm
(5/8”) inside diameter
Used in PLT054179 and
PLT079648 kits
John Deere
Late MaxEmerge 2; all MaxEmerge Plus, Pro,
XP, XP Pro
PLT041968 AA41968
Gauge Wheel Arm
planter on 1” diameter pin
with set screw
John Deere
7200, 7300 and early 1760, 1780 MaxEmerge 2 row units
$24.25
PLT006614 GA6614
Gauge Wheel Arm
planter on 1” diameter pin
with bolt
Kinze
2000 series, 1993-1999
$23.25
John Deere
7200, 7300 and early 1760, 1780 MaxEmerge 2
A57057
PLT141968
Self Aligning Bushing, 1” inside
diameter
Used in PLT006614 and
PLT041968 kits
AA35951
GA2022
Bearing with Sleeve, Gauge
PLT035951 128558C91 Wheel
For roll pin style gauge wheels
Kinze
$9.95
2000 series, 1993-1999
John Deere MaxEmerge, MaxEmerge 2 prior to 1992
Kinze
All planters prior to 1993
Case-IH
800, 900, 1200 series to S/N CBJ0001610
White
$9.95
$8.95
5100, 5700 series
www.sidist.com
31
GAUGE WHEEL
ASSEMBLIES & TIRES
Gauge Wheel Assemblies
Product ID OEM#
PLT435392
PLT441359
PLT466604
PLT421864
PLT466604
PLT421864
Description
Gauge Wheel Assembly
AA35392 4.5” x 16” standard profile ti e
AA32046 Yellow metal halves
Water pump style bearing (roll pin)
4.5” x 16” standard profile ti e
Black metal halves
AA41359
Black plastic hub cap
Set screw style bearing
AA66604 Black metal halves
5/8” bearing
AN211864
Yellow metal halves
5/8” bearing
PLT428163
AA66604
AN281630
Black metal halves
7073.N
5/8” bearing
PLT216518
Black metal halves
5/8” bearing
PLT316571
2.5” x 16” reduced inner diameter
tire
Black metal halves
5/8” bearing
Product ID OEM#
A22884
A84050
Standard Tire
800.368.7773
Model
Price/ Each
All MaxEmerge and MaxEmerge 2 prior to
John Deere planters
1992
Uses PLT204008 gauge wheel tire
$59.95
John Deere planters MaxEmerge Plus, MaxEmerge Pro
John Deere drills
1530, 1535 with MaxEmerge Pro row units
White planters
6000 series
$69.95
John Deere planters MaxEmerge XP, XP Pro
John Deere drills
1530, 1535 with MaxEmerge XP row units
$69.95
John Deere drills
750, 1850
750, 1560, 1565, 1590, 1690, 1835, 1850,
1860, 1890, 1895, 1990
Kinze planters
1993 and after except 3000 series
Great Plains planters YP series
Monosem Plus
Late model Plus series
White planters
8000 series
Case-IH
Fits most planters and grain drills that utilize
John Deere
a 5/8” or 16mm mounting bolt. Designed for
Kinze
twin row seeders and no-till conditions so
Great Plains
less residue is contacting the tire improving
Monosem
the seed depth consistency.
White
Case-IH
Fits most planters and grain drills that utilize
John Deere
a 5/8” or 16mm mounting bolt. Designed for
Kinze
twin row seeders and no-till conditions so
Great Plains
less residue is contacting the tire improving
Monosem
the seed depth consistency. Not recomWhite
mended for use in tilled soil conditions.
$59.95
John Deere drills
Gauge Wheel Tires
Make
John Deere planters
John Deere drills
Gauge Wheel Tire
John Deere drills
PLT204008
Standard profile o set
John Deere drills
4.5” x 16”
GD1086
Kinze planters
852060
White planters
John Deere planters
A84450
Gauge Wheel Tire
John Deere drills
A82740
Reduced inner diameter (RID)
John Deere drills
4.5” x 16”
John Deere drills
MRT003730
Kinze planters
RID tire allows seed trench to lift &
White planters
fracture. Not recommended for use in Case-IH planters
128633C1
tilled soil conditions.
Case-IH air drills
87602293
New Holland planters
Gauge Wheel Tire
John Deere planters
A84062
PLT204095
Standard profile o set
John Deere drills
A77881
4.5” x 16”
John Deere drills
Gauge Wheel Tire
Reduced inner diameter (RID)
John Deere planters
4.5” x 16”
A84451
John Deere drills
MRT003731
A82253
John Deere drills
RID tire allows seed trench to lift &
fracture. Not recommended for use in
tilled soil conditions.
RID Tire
Description
Make
Model
MaxEmerge, MaxEmerge 2, MaxEmerge Plus, MaxEmerge Pro
750, 1560, 1850, 1860
1530, 1535 with MaxEmerge Plus row units
Early 1590, 1690, 1835, 1890, 1895, 1990 (3/8” flange
All
5100, 5700, 6000, 8000
MaxEmerge, MaxEmerge 2, MaxEmerge Plus, MaxEmerge Pro
750, 1560, 1850, 1860
1530, 1535 with MaxEmerge Plus row units
Early 1590, 1690, 1835, 1890, 1895, 1990 (3/8” flange
All
5100, 5700, 6000, 8000
800, 900, 950, 955, 1200
SDX30, SDX40
SP280, SP380, SP480, SP580
MaxEmerge XP, XP Pro
Late 1590, 1690, 1835, 1890, 1895, 1990 (7/8” flange
MaxEmerge XP, XP Pro
Late 1590, 1690, 1835, 1890, 1895, 1990 (7/8” flange
$69.95
$59.95
$59.95
Price/Each
$24.95
$28.95
$24.95
$34.95
GAUGE WHEEL ARMS
Gauge Wheel Arm Kits, Roll Pin Style
PLT110120
Make Model
Gauge Wheel Arm Kit. Gauge wheel
arm mounts to planter on 1” diameter John
Deere
pin.
Gauge wheel mounts to arm with
Kinze
roll pin.
7000, 7100, 7200, 7300
2000 series prior to
1993
Gauge Wheel Arms Kits, Bolt-On Style
PLT110100
PLT110115
Make Model
arm mounts to planter on 1” diameter
pin.
Gauge wheel mounts to arm with bolt.
arm mounts to planter with 16mm x
100mm bolt.
Gauge wheel mounts to arm with bolt.
John Deere’s self-aligning bushing is
not re-used. Kit includes new threaded
spindle, bolt and lock washer.
John
Deere
Kinze
John
Deere
7000, 7100, 7200,
7300, 1700
2000 series 1993-1999
Note: For XP row units
must purchase 5/8”
bolts for gauge wheels.
PLT110140
PLT110146
Make Model
Gauge Wheel Arm Kit
Gauge wheel arm mounts to planter
on 1” diameter pin.
Gauge wheel mounts to arm with set
screw.
Gauge Wheel Arm Kit
Gauge wheel arm mounts to planter
with 16mm x 100mm bolt.
Gauge wheel mounts to arm with set
screw.
John Deere’s self-aligning bushing is
not re-used.
Kit includes new threaded spindle,
bolt and lock washer.
All pivot arm kits include:
• 2- Heavy duty cast pivot arms with o-ring grooves
• 2- Counterbored, heat-treated bushings with a grease groove
• 4- O-rings for pivot arms
$64.95 • 2- Key handle wrenches used for adjustment
• 2- 7-gauge fl t washers used for installation
• 10- 14 gauge shim washers used for adjustment
Price • Installation instructions
$64.95
1700 series with selfaligning bushing
Gauge Wheel Arm Kits, Set Screw Style
Price/
Row
$74.95
Price
John
Deere
7200, 7300 (1992 and
newer), 1700
$64.95
John
Deere
1700 series with selfaligning bushing
$74.95
Gauge Wheel Arm Replacement Parts
Product ID
PLT110200
PLT110210
PLT110220
PLT110180
PLT110250
PLT110251
PLT110254
PLT110256
PLT110257
PLT110264
Description
Gauge wheel arm only, threaded, each
Gauge wheel arm only, roll pin, each
Gauge arm only, set screw, each
Bearing Kit, includes 2 gauge wheel bearings, 5/8” x 3” bolts and
lock washers
Bearing, 40mm, for gauge wheels
Counterbored bushing, each
O-ring, (2 required per arm) each
Shim washer, 14-gauge, each
Key handle wrench, without washer, each
Flat washer, 7-gauge, 1/2” ID, each
Price
$29.95
$29.95
$29.95
$17.95
$7.95
$5.95
$0.40
$0.30
$3.75
$0.95
GAUGE WHEEL COVER
For John Deere, Kinze and White Planters
• Prevents rocks from bending planter units and twisting depth control arms
• Reduces bending and breaking of depth gauge wheels
• Helps prevent plugging of rocks and residue between depth gauge wheel and
planter drive wheel
• Made of heavy gauge steel
• Includes all mounting hardware
Product ID
Description
Price
PLT130500
Gauge wheel cover, each
$12.95
www.sidist.com
33
MUDSMITH GAUGE
WHEEL TIRES
GAUGE WHEELS RE-INVENTED!
• Greatly improves planting efficie
wet soil conditions.
y during
• Reduces wheel plugging that causes delays,
repairs and stress.
• Wheel has proven to be the most plugfree design available in addition to offering
outstanding durability.
Product ID
MSW535450
MSW535451
MSW870300
MSW870301
MSW530450
MSW535451
MSW830300
MSW830301
MSW630450
MSW630451
MSW850300
MSW850301
MSW553450
MSW653450
MSW873300
MSW810300
MSW760250
MSW730250
MSW750250
Description
MudSmith Gauge Wheel Assembly
4.5” x 16” reduced inner diameter tire
3” x 16” standard profile ti e
3” x 16” reduced inner diameter tire
800.368.7773
MudSmith Gauge Wheel Assemblies
Make
Bearing Type
Price/Each
John Deere, Kinze, Monosem, White Water pump style bearing (roll pin)
$130.00
$130.00
$130.00
$130.00
John Deere, White
$130.00
John Deere, White
$130.00
John Deere, White
$130.00
John Deere, White
$130.00
5/8” bearing
$130.00
5/8” bearing
$130.00
5/8” bearing
$130.00
5/8” bearing
$130.00
Case-IH
$130.00
Case-IH
5/8” bearing
$130.00
Case-IH
$130.00
Case-IH
5/8” bearing
$130.00
Great Plains, John Deere, Kinze,
Monosem, White
Monosem, White
Monosem, White
Monosem, White
$130.00
John Deere, White
$130.00
Monosem, White
5/8” bearing
$130.00
NEEDHAM AG
V8 FIRMING WHEEL
Needham Ag Technologies, LLC
Designed a New and Improved
Seed Firming Wheel Called V8.
DRL400001
Price
Needham AG V8 fi ming wheel,
John Deere drill
$39.95
Features:
• John Deere’s single disc opener creates a seed
slot that is almost vertical on the disc side with
an angled sidewall on the opposite boot side
• John Deere’s fi ming wheel is too wide to fit
down into the angled seed slot, especially in notill conditions
• Needham Ag V8 fi ming wheel is designed to
closely match the profile of the seed slo
• Needham Ag V8 fi ming wheel pushes the
seed into the bottom of the seed slot for
uniform access to soil moisture
• Needham Ag V8 fi ming wheel promotes
more even seed emergence, even in low soil
moisture conditions
• Needham Ag V8 fi ming wheel incorporates a
5203 bearing for longer service life
• Needham Ag V8 fi ming wheel includes
mounting bolt, lock nut, spacer and installation
instructions
• Fit John Deere 50, 60 and 90 Series drills and
air seeders, plus Case-IH SDX air seeders
Needham Ag V8 wheel installed
on John Deere drill
Needham Ag V8
wheel is down
within the seed slot
John Deere 1” firming
wheel is too wide to fit
down within the seed
slot
Firming Wheels Compared
Maximum
Width
(Inches)
Durometer
(compound
hardness)
Wheel Design
Characteristics
Ability to
Flex Within
Seed Slot
John Deere
Part Number
AN281359
0.982
82
Rubber tire with 2
steel wheel halves
No
John Deere
Part Number
AN282296
0.831
80
Rubber tire with
2 plastic wheel
halves
No
95
Flexible rubber
wheel design with
tapered shape to
match seed slot
Yes
Wheel
Information
Tire
Design
Profil
Needham Ag
V8
Firming Wheel
0.596
www.needhamag.com
NH3 DISC SEALERS
• Start applying anhydrous and 28% fertilizer when crop is smaller.
• Drive faster without covering corn.
• Moves ground where knife ran for better sealing.
• Prevents loss of anhydrous and 28% fertilizer.
• Prevents the possibility of open slots in dry conditions.
• Purchasing without discs and using your planter’s worn seed discs makes it
economical.
• Independent arms reduce clogging and dragging of residue.
• Powder coat painted frames.
• No springs; simple and low maintenance.
• Only needs greased every 200-300 acres and before storing for the season.
NH3 Disc Sealers
Product ID
Description
GRB100000
Disc Sealer, straight shank, 2” wide
$215.00
Price
GRB200000
Disc Sealer, straight shank, 1” wide
$215.00
GRB300000
Disc Sealer, coiled shank
$215.00
www.sidist.com
35
AIR DESIGN
PLANTER SCRAPERS
The AIR DESIGN scrapers feature an extremely simple design with a special tungsten carbide
edge. The tungsten carbide provides outstanding abrasion resistance along with toughness to
give superior, long-lasting performance and reduces the need for replacement.
Scraper kit, outside. Includes 2 scrapers.
ADC210560
Reuse original Case-IH arms and rivets.
Scraper kit, outside
ADC210570
Includes 2 scrapers & arms.
ADC210670 Scraper kit, inside, left disc. Scraper & bracket.
ADC210680 Scraper kit, inside, right disc. Scraper & bracket.
ADC210580 Scraper kit, inside, left & right discs. Scrapers only.
Scraper kit, outside. 1-piece design.
ADC210490
Includes 2 scaper/arm assemblies & 1 spring
ADC210500
Includes 2 scrapers, 2 arms & 1 spring.
ADC210880
Includes 2 scraper/arm assemblies & 1 spring.
ADC210510 Includes 2 scrapers. Reuse original John Deere arms
and spring.
Scraper kit, outside. Includes 2 scrapers, 2 springs,
ADC210890
and 2 bolts
ADC210700 Scraper kit, inside
ADC210740 Scraper kit, inside
ADC210480 Scraper kit, outside. Includes 2 scrapers
Scraper kit, outside.
ADC210530 Includes 2 scrapers, 2 adapter plates & 2 shims.
Reuse original White arms.
Scraper kit, outside.
ADC210540
Includes 2 scraper/arm assemblies & 1 spring.
Make
Model
Price
Case-IH
800, 900, 1200
$29.95
Case-IH
800, 900, 1200
$36.95
Case-IH
Case-IH
Case-IH
John Deere
Kinze
John Deere
Kinze
955, 1200
955, 1200
955, 1200
7000, 7100 series
2000, 3000 series
7000, 7100 series
2000, 3000 series
$24.95
$24.95
$26.95
$36.95
$34.95
$36.95
$24.95
John Deere MaxEmerge 5, Exact Emerge
$42.95
John Deere 7200, 7300, 1700; non-cast shank $33.95
John Deere 7200, 7300, 1700; cast shank
$33.95
Kinze
4000 series
$36.95
White
6000, 8000 series
$26.95
White
9000 series
$36.95
• Aggressive cleaning
action
• Enhances seed depth
placement accuracy
• Easy to install
• No drilling or other
hardware required
Tungsten carbide edge
will outlast OEM steel
scrapers by a factor of
100 to 1.
AIR DESIGN DRILL SCRAPERS
Save time, labor and money. The Air Design scraper will outlast and outwear standard cast
scrapers and they can’t flip ver and fall off. The scraper features a special tungsten carbide
cutting edge. Includes hardware for installation.
Product ID
ADC210821
ADC210822
ADC700000
ADC700200
ADC700300
ADC210801
ADC210802
ADC210950
ADC800000
ADC210601
ADC210602
Description
Scraper kit, right disc
Scraper kit, left disc
Scraper kit
Scraper kit, left leading disc
Scraper kit, right leading disc
Scraper kit
Scraper kit
Scraper kit. Includes 2 scrapers.
ADC210750
Reuse original Krause arms.
ADC210920 Scraper kit
Make
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Great Plains
John Deere
John Deere
John Deere
Model
500 series
500 series
620, 6200
5400, 5500
5400, 5500
SDX series
SDX series
00HD opener series
455, 730, 1060, 8300, 9350
1590, 1890, 1895, 1990
1590, 1890, 1895, 1990
Price
$39.95
$39.95
$19.95
$23.95
$23.95
$39.95
$39.95
$26.95
$19.95
$39.95
$39.95
Krause
All
$24.95
Salford
500 series air drills
$79.95
ACRE PLUS SEED BOX TOPPER
• OEM color matched plastic construction
• Adds one bushel to seed box capacity - Plant more acres between fill
• Fit John Deere 7200, 7300 (1995 and newer), & John Deere 1700 series poly boxes
• Fit Kinze 3000 series poly boxes (2001 and newer)
• Not recommended for fibe glass constructed boxes
PDM030000 Acre Plus
PDM031000 Acre Plus
Make
John Deere
Kinze
800.368.7773
Model
7200, 7300 (1995 & newer with poly boxes). 1700 series
3000 series (2001 & newer with poly boxes)
Kinze
Price
$31.95
$31.95
John Deere
M3 MONITOR SYSTEM
Population Monitor for Planters and Grain Drills
The M3 was designed from the ground up to be accurate, user friendly, dependable and affordable. Using an Intel® microprocessor the M3
monitors speed, area, population, hopper levels, limit switch status, seed spacing, and row failure to keep the operator informed of the current
status of the planter or drill.
The M3 has two separate sets of setup parameters that may be entered and retained, eliminating the need to re-enter values when switching
planters or drills. Every feature of the M3 has been designed to be as simple to operate as possible, thereby eliminating confusion and
unnecessary down time in the fiel .
Each Kits Includes:
• M3 Monitor Console
• Power Cable
• Cab Harness
• Planter or Grain Drill
Harness
• DICKEY-john® HighRate Seed Sensors
• New Seed Tubes for
Planters
• Seed Tube Adapters for
Drills (if required)
• Instruction Manual
M3 Monitor Drill Kits
Product ID
AGT30040102
AGT30040202
AGT30040302
AGT30040402
AGT30060102
AGT30060302
AGT30080102
AGT30080302
AGT30080402
AGT30120102
AGT30160202
AGT30160203
Description
M3 Kit, 4-row drill, rigid, 10-20’
M3 Kit, 4-row drill, folding, 20-25’
M3 Kit, 4-row drill, folding, 30’
M3 Kit, 4-row drill, tandem, 10-15’
M3 Kit, 6-row drill, 3-fold, 30’
M3 Kit, 8-row drill, front fold, 30’
M3 Kit, 8-row drill, tandem, 10-15’
M3 Kit, 16-row drill, folding, 20-25’
M3 Kit, 16-row drill, folding, 30’
Price
$1,209.00
$1,375.00
$1,430.00
$1,485.00
$1,650.00
$1,650.00
$1,925.00
$2,035.00
$2,035.00
$2,475.00
$3,135.00
$3,135.00
Product ID
AGT30045051
AGT30045052
AGT30065051
AGT30065052
AGT30085051
AGT30085052
AGT30085251
AGT30085252
AGT30085351
AGT30085352
AGT30125051
AGT30125052
AGT30125251
AGT30125252
AGT30125351
AGT30125352
AGT30165051
AGT30165052
AGT30165251
AGT30165252
AGT30165351
AGT30165352
Description
M3 Kit, 4-row planter, rigid, John Deere 7000, 7100, Kinze
M3 Kit, 4-row planter, rigid, John Deere 7200, 7300, 1700 series
M3 Kit, 8-row planter, rear fold, John Deere 7000, 7100, Kinze
M3 Kit, 8-row planter, rear fold, John Deere 7200, 7300, 1700 series
M3 Kit, 8-row planter, front fold, John Deere 7000, 7100, Kinze
M3 Kit, 8-row planter, front fold, John Deere 7200, 7300, 1700 series
Price
$1,375.00
$1,375.00
$1,650.00
$1,650.00
$1,925.00
$1,925.00
$2,035.00
$2,035.00
$2,035.00
$2,035.00
$2,475.00
$2,475.00
$2,585.00
$2,585.00
$2,585.00
$2,585.00
$3,025.00
$3,025.00
$3,135.00
$3,135.00
$3,135.00
$3,135.00
Product ID
AGT10003389
AGT10003795
AGT10005800
AGT10006552
AGT10006518
AGT10006525
AGT10009000
AGT1050300001
AGT1050300002
MTS901425
MTS901413
Description
Sensor, drill, Dickey-john, high-rate
Power cable, M3 monitor, 18’
Cab cable, M3 monitor, Computer-Trak pinout, 12’
Adapter kit, John Deere drill seed tubes
Limit switch kit (disables acre counter when implement is raised)
Gear tooth sensor kit, for RPM or ground speed sensing
Cab cable, M3 monitor, DICKEY-john pinout, 12’
M3 console, includes DICKEY-john cab cable
M3 console, includes Computer-Trak cab cable
Astro 5 GPS Speed Sensor, 5Hz update rate
Astro II GPS Speed Sensor, 1Hz update rate
M3 Monitor Planter Kits
M3 Monitor Accessories
www.sidist.com
Price
$101.95
$28.00
$85.00
$20.00
$90.00
$120.00
$85.00
$925.00
$925.00
$449.00
$339.00
37
SEED LEVEL INDICATOR
Are you ready for planting?
Price
Where will you be when the planter runs
PLT100500
Seed Level Indicator
$ 99.95
out of seed? Eliminate the frustration of
the uncertain. You can save time and steps
during the busy planting season by installing the Seed Level Indicator on one or more
of your planter seed boxes. It’s easy and will save you time.
KINZE BRUSH METER ADAPTER
Conversion Kit to Adapt to Kinze Brush-Type Seed Meter
to Fit a John Deere 7200, 7300 and 1700 Series Finger Pick-up Seed Box
Conversion kit includes:
1. Seed block for finger pic -up seed box
2. Metric bolt and nut
3. Detailed instructions for complete installation
Price
PLT000100
$9.95
Adapter kit, to install Kinze brush meter on John Deere 7200, 7300 and 1700 series planter
Note: Will not work with Kinze Brush Meters manufactured after July 2010 because the shaft is now hardened and very difficult o modify.
TRASH GUARD
• Keeps your planter V-Closing wheels free of old stalks, lumps of soil and other
field deb is
• Improves planting results
• Saves time and money on maintenance
• For all John Deere, Kinze and White planters
• Bolts easily between the closing wheels
• Includes installation hardware
Product ID
Description
Price
PLT126000
Trash guard kit, John Deere, Kinze and White planters
$9.95
LOCKEASE HITCH PINS
Product ID
LEP010001
LEP010002
LEP010003
LEP010004
LEP010005
LEP010006
LEP010008
LEP010009
LEP010010
LEP080005
Lockease Hitch Pin
Description
Lockease hitch pin, 3/4” x 6”
Lockease hitch pin, 7/8” x 6”
Lockease hitch pin, 1” x 6”
Lockease hitch pin, 1-1/8” x 7”
Lockease hitch pin, 3/4” x 4-1/2”
Lockease repair kit, includes thumb latch,
spring & roll pin
800.368.7773
Price
$21.75
$23.25
$25.50
$30.25
$32.00
$39.00
$19.50
$22.25
$18.50
$6.50
TRAIL-JET FERTILIZER OPENER
Applies Liquid Fertilizer Behind the Planter
•
•
•
•
•
•
•
•
•
Frees up the front of the planter for other attachments
Allows for split applications of two different types of fertilizer
No sideways movement of residue
High pressure assures excellent placement of fertilizer
Mounts directly on the planter unit – no extra tool bars required
Low maintenance and low draft
13” double-beveled coulter blade
Applies fertilizer approximately 3” to either side of the row
Trail-Jet requires a constant pressure pump; not a squeeze pump
Product ID
TJT008000
TJT001200
TJT001255
TJT007000
TJT007200
TJT007500
TJT007600
TJT007700
TJT007000
TJT003000
TJT001000
TJT006000
TJT008100
Product ID
TJT830002
TJT830003
TJT830004
TJT830005
TJT830006
TJT830008
TJT830010
TJT830012
Trail-Jet Fertilizer Opener
Description Make
Model
Trail-Jet
Case-IH
800, 900 series
Trail-Jet
Case-IH
1200 series, except 1220
Trail-Jet
Case-IH
1215-1265 series
Trail-Jet
John Deere
7000, 7100 series with MaxEmerge row units
Trail-Jet
John Deere
7200, 7300, 1700 series with MaxEmerge 2 row units
Trail-Jet
John Deere
1700 series with MaxEmerge Plus row units
Trail-Jet
John Deere
1700 series with MaxEmerge XP row units
Trail-Jet
John Deere
1700 series with XP Pro row units
Trail-Jet
Kinze
2000 series
Trail-Jet
Kinze
3000 series
Trail-Jet
Monosem
All row units
Trail-Jet
White
6000 series
Trail-Jet
White
8000 series
Note: Price is per row and does not include pump or hoses. Nozzles are sold separately.
Trail-Jet Nozzles
Description
Stainless steel nozzle, 5 gallons per acre
Price
$269.00
$249.00
$249.00
$235.00
$235.00
$249.00
$251.00
$251.00
$235.00
$249.00
$259.00
$249.00
$249.00
Price
$16.16
$16.16
$16.16
$16.16
$16.16
$16.16
$16.16
$16.16
Available For:
John Deere Series
7000-7300
1700
Kinze Series
2000
3000
Case-IH Series
800
900
1200
White Series
6000
8000
INSECTICIDE SKIRT
PDM050000
Insecticide skirt, only
fits whi e All Terrain
Bander (ATB)
Price
$5.75
• Designed to keep insecticide
in place during windy planting
conditions
• Soft fl xible material will not affect
fl w pattern of insecticide
• Uses existing hardware to mount to
bander
• Available for Kinze, John Deere, and
models using insecticide bander as
shown in picture
www.sidist.com
39
ACRA-PLANT V-SHOTS
•V-Slice proven technology improves seed-soil contact
•Eliminates seed roll-and-bounce for uniform and early emergence
•Apply starter fertilizer where it belongs, below the seed
•Includes v-slice insert, tube holder attachment, seed tube clip, 42” of ¼”
tubing and all hardware
Acra-Plant V-Shots
Product ID
APL909885
APL911785
APL921785
APL901785
APL901985
APL901885
APL904985
APL901685
APL901690
Made of
Chrome-Alloy
For Longer Life.
Description
Make
Acra-Plant V-Shot Case-IH
John Deere
Acra-Plant V-Shot
Kinze
Acra-Plant V-Shot John Deere
Acra-Plant V-Shot Kinze
Acra-Plant V-Shot Kinze
Acra-Plant V-Shot White
Acra-Plant V-Shot White
Model
1200 series
MaxEmerge, 7000, 7100
Before 1984
2000 series
MaxEmerge 1984-1986
MaxEmerge 2, Plus, Pro
XP, XP Pro, ME5 row units
3000 series
4900 series
6000, 8000 series
9000 series
Price
$69.95
$69.95
$69.95
$69.95
$69.95
$69.95
$69.95
$69.95
$69.95
ACRA-PLANT INSERTS
Acra-Plant V-Slice Inserts
Product ID
Description
Make
Model
Price
APL001685
Acra-Plant V-Slice insert
White
6000, 8000 series
$26.95
APL001785
John Deere
Kinze
All, except XP row units
2000 series
$28.95
APL001885
Includes special socket-head cap screws with Loctite.
Kinze
3000 series
$39.95
APL201985
John Deere
XP, XP Pro, ME5 row units
$43.95
APL001772
Seed tube extension bracket
Required when a straight seed tube is used.
John Deere
All
$7.95
Product ID
Description
Make
Model
Price
APL009040
Acra-Plant V-9 opener
IHC
400, 500 series with offset discs
$183.95
APL009840
Case-IH
800, 900, 1200 series
$143.00
APL034550
White
5100, 5700 series
$150.15
Acra-Plant V-Slice Openers
800.368.7773
ACRA-PLANT NOTCHED DISC OPENERS
Acra-Plant® Notched Disc Openers
• Discs are 4mm thick and constructed of chrome-boron-moly steel alloy to handle
the abuse seen in No-Till planting
• Alternating 11-notch and 15-notch discs aggressively slice through the toughest
residue and hardest ground without hairpinning
• Discs shed wet/sticky soils without excessive use of power-robbing scrapers
• Heavy-Duty Gothic Arch bearing design extends wear life and resists the loads that
tear up seed tubes
• Complete your No-Till Retrofit pac age with the V-slice insert required for your
planter model
Special Features of Acra-Plant No-Till/Min-Till Planter Notched Disc Opener Kit
1. The two disc blades in the set each have a different number of notches, 15 notches on
Convert your standard
one blade and 11 notches on the other. This assures that the blades will self-turn instead
planter to a No-Till machine
of skidding over old crop residue, and the blade notches overlap as they work together to
without increasing row unit
actually CUT the trash ahead of the V-slice opener system. This feature converts the planter
down-pressure and without
openers to a true NO-TILL operation that is equally suited for Minimum Till and Conservation
the high cost of residue
Tillage plans.
management systems or
2. The disc blades themselves are up to 50% thicker than the smooth OEM blades that they
coulters
replace. Combine that with the Chrome-Boron-Moly alloy, and you get a strength and
durability unmatched by other replacement blades. Cutting through heavy residue and trash
acre after acre requires tough, durable, and thick opener blades. Acra-Plant answers the call to duty with these blades.
3. Note that the opener discs feature a fl t ground edge, rather than the cheaper alternative of hollow grinding the edge. Flat grinding a true
bevel allows the blades to self sharpen as they wear, rather than immediately going dull.
4. The bearings used in Acra-Plant opener discs are of the true Gothic Arch design. Gothic Arch 4-race bearings cost more, but they allow the
bearings to transmit radial load, axial thrust & overturning moments to a much greater extent than the cheaper twin-race ball bearings.
5. The alloy casting V-slice opener that actually produces the uniform seed trench is made of 25% chrome for longer life and durability.
Acra-Plant Notched Disc Openers
Product ID
Description
Make
John Deere
Kinze
White
John Deere
Kinze
White
Case-IH
White
Case-IH
White
APL101711
Acra-Plant notched disc opener, 15”-11 notch
APL101715
APL109811
APL109815
APL001760
Bearing & flange epair kit, notched disc openers
Model
All except XP row units
2000, 3000 series
6000, 8000 series
All except XP row units
2000, 3000 series
6000, 8000 series
400, 500, 800, 900, 1200 series
5000 series
400, 500, 800, 900, 1200 series
5000 series
Price
$96.95
$96.95
$96.95
$96.95
$51.95
Note: A fi ming point must be installed when using notched disc openers.
Acra-Plant Notched Marker Discs
Product ID
Description
Price
APL430000
Acra-Plant 13” notched marker disc
Note: For John Deere prior to 1974, must purchase AA27924 from dealer.
Note: For Case-IH must purchase additional
bracket shown below.
APL430001
Marker bracket, Case-IH with folding markers and
Case-IH
round shaft
Round shaft
$40.55
APL430002
Marker bracket, Case-IH with non-folding markers and fl t plate
Flat plate
$45.95
John Deere 7000, 7100, 7200, 7300, 1700 series
Kinze
2000, 3000 series
Case-IH
800, 900 series
Case-IH
www.sidist.com
$115.95
41
ACRA-PLANT
FERTILIZER KNIVES
• Acra-Plant replaceable point fertilizer knives outlast “throwaway” knives 3–5 times - reducing
downtime and saving money in the long run
• Chrome Carbide Points scour quickly to a high polish, slipping through the soil and pulling easier
than “throwaway” knives — you’ll save more fertilizer with the unique self-sealing design
• Acra-Tuff Ch ome Carbide alloy point continues to perform like new throughout its life with no
degradation of performance after just a few hundred acres
• Acra knives are designed for minimum surface disturbance — perfect for your No-Till cropping plan
• With a choice of three Acra-Tuff Ch ome Carbide replacement points and many NH3 and liquid
tube options, you can tailor your fertilizer rig to match your conditions and switch very easily if your
crop rotation or nutrient plan changes
Acra-Plant Fertilizer Knives
Shank with NH3 tube (.408 OD). Universal hole and slot to fit most applic tors.
APL700010 Remove spirol pin for quick point replacement. Dead air space insulates point to
prevent freeze-ups.
Fertilizer point, standard wing. The most widely used and effective in a wide
APL700041
variety of soil types. Includes 3/8” x 1-3/8” spiral pin
Fertilizer point, super wing. Ideal for use in sandy soils that need to be loosened
APL700042 or fractured to allow maximum penetration of fertilizer. Includes 3/8” x 1-3/8”
spiral pin
Fertilizer point, heavy duty super wing. Ideal for use in sandy soils that need to
APL700043 be loosened or fractured to allow maximum penetration of fertilizer. Includes
3/8” x 1-3/8” spiral pin
Fertilizer point, super wing with closer. Designed for sandy or clay soils that are both
APL700044 tough to open and tough to close. Incorporates a “Super Wing” as well as “Closing
Wing” to seal the fertilizer at the desired location. Includes 3/8” x 1-3/8” spiral pin
APL700142 Strip till point, has a fl t wedge point on bottom like a strip till knife
ST-16 heavy duty strip till point. Designed for 8-12” deep application and subsoil
APL701600
shattering on strip till rigs. Protected liquid tube for delivery of anhydrous or liquid.
Acra-Plant Fertilizer Tubes
Product ID
APL700020
APL700021
APL700022
Description
Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled
Replacement tube, 3/8” liquid (.408” outside diameter) open end
Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled,
APL700023
with clip rings for 1/2” plastic hose for dual applications.
APL700025 Replacement tube, 1/2” anhydrous (.569” outside diameter) crimped and drilled
APL700041
APL700042
APL700043
APL700044
APL700010
• Quick-Change
• Side Mount
3/8˝ and 1/2˝ NH3 or liquid
tubes available in just about
any combination
High-strength steel shank is
punched to accept most
side-mount applicators
Price
$46.65
Change worn inserts in
seconds with spring pin
$28.95
$29.95
Three styles of Chrome
Carbide replacement
points available to match
your ground conditions
$33.95
$49.95
$35.95
$76.95
Price
$10.95
$10.45
$12.95
$25.20
$13.75
Gas/liquid expel point is low, forward, and
protected by the Chrome Carbide point to
minimize freeze-up, plugging and tube
wear, even in dual application
APL701600
ACRA-PLANT BLU-JET PARTS
APL801300
Made Of 26% Chrome-Alloy For Longer Life
V-crown ripper “Spring” point, Blu-Jet Sub-Tiller II with 1-1/2” shank. Narrow point is 2” wide and
APL801300
14” long for deep tillage. Heavy duty; weighs 11 lbs. vs. 7 lbs. for OEM.
V-crown ripper “Fall” point, Blu-Jet Sub-Tiller II with 1-1/2” shank. Wider point is 2-7/8” wide and
APL801400 15-1/2” long for deeper tillage and more shattering action. Heavy duty; weighs 16 lbs. vs. 13.6
lbs. for OEM.
APL801600 Shin guard, Blu-Jet Sub-Tiller II with 1-1/2” shank.
800.368.7773
Price
$72.95
APL801400
$99.95
$91.95
APL801600
CAUTION: S.I. Distributing Inc. warrants these products to be free of defects in material and workmanship. Liability under warranty shall extend to replacement
or credit of product found to be defective on examination by S.I. Distributing Inc. This warranty does not extend to misuse or damage by accident or negligence.
Chrome castings are not guaranteed for use in rocky, stony or frozen ground. S.I. Distributing Inc. will not honor any claim for warranty on chrome castings that
have been altered or welded on in any way. S.I. Distributing Inc. will not recognize any claims for consequential or incidental damages.
ACRA-PLANT
CONSERVATION RIPPER POINTS
Features & Benefits
Conservation Points are
now available in 2-1/2”
(no wing), 7” winged, &
10” winged for just about
any application!
• Relieves soil compaction zone for yield improvement
• Improves soil tilth to increase nutrient availability and root uptake
• Produces a subsoil profile th t assures improved root penetration
• Assures moisture retention in the driest conditions
• Provides fracture and lift with little surface disruption or “slabbing”
• Allows fl xibility in running depth
• Scours up, pulls easy and fl ws soil around the shank to reduce wear
• Provides long wear life in the widest variety of soil conditions
The CRP line of points is the
newest evolution of Subsoiler
& Ripper points designed by
combining Acra-Plant technology
with the years of experience
ShieldAg has in supplying longlasting high-performance Chrome
Carbide Ripper Points.
2-1/2”
7”
10”
CRP points are available with wings and without wings for inner row and spring field ork. The unique design allows for the use of solid 25%
chrome carbide in all the wear surfaces with mounting boots designed specifically or the most popular makes and models of disc rippers and
subsoilers.
Please call with make and model of ripper for pricing.
ACRA-PLANT QUICK-CHANGE
FERTILIZER KNIVES
For Chisel Plow Applicators
Features & Benefit
• Long-lasting Alloy replaceable points outwear ˝throwaway˝ chisel knives 3–5 times
• Continues to perform like new throughout its life, no degradation of performance after just a few
hundred acres
• Convert from fertilizer placement to standard chisel in just a few minutes by replacing the
APL708041 fertilizer point with the APL705141 chisel plow point
• Tube options available for nearly any NH3 or liquid application
Key
1
2
3
4
5
6
6
6
Product ID
APL708041
APL705141
APL705011
APL708003
APL705029
APL705020
APL705021
APL705022
6
APL705023
6
APL705024
Acra-Plant Chisel Plow Applicators
Description
Chisel plow fertilizer point. Includes APL500657, 1/2” x 1-1/4” spiral pin
Chisel plow tillage point. Reversible. Includes APL500657, 1/2” x 1-1/4” spiral pin.
Chisel plow shank
Adjusting wedge to change shank angle
Tube mounting kit
Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled, with clip rings
for 1/2” plastic hose for dual applications.
www.sidist.com
Price
$21.95
$28.25
$27.45
$9.45
$14.05
$11.15
$10.95
$13.35
$27.35
$14.15
43
QUICK FINGER
+
Broken Reel Finger
=
Quick Finger Installation
Repaired Reel Finger
in a Snap!
The Quick Finger will Fit the Following Pipe Reels:
AGCO
300, 400, 500, 700, 800 series heads
Case-IH
1010, 1020, 2020, series heads
Caterpillar
1998 and later
John Deere
900, 600 series heads
Massey Ferguson
9700, 9750, 9800, 9850 series heads
New Holland
971, 973, 71C, 73C, 72C, 74C series heads
Product ID
Description
Price
PDM020000
Quick Finger, 10-Pack
$16.00
• Quick repair
• Saves time and money
• Easy installation, no
tools required
• Cost effective vs. OEM
replacements
• Patented
Note: Will only properly fit evel II pipe reels with 6” tine spacing. Quick Finger will fit ML eels with 4.5” tine spacing
but it will be 3/8” shorter than the original tine.
PLASTIC WEAR BLOCKS
Long Lasting Self-Lubricating Plastic Chain Tightner and/or Wear Block with 9/16” Hole
• Decreases wood block replacement
• Reduces chain wear and friction
• Saves labor, money and downtime
• Increases chain life and keeps chain tight
• Lasts 4 To 5 times longer than wood blocks
• Replaces any idler on chain driven equipment
The Plastic Wear Block has characteristics that are very high in lubrication which
reduces chain wear. After several years of continuous testing, this type of plastic
has shown an outstanding capability to replace chain sprocket idlers on all types
of machinery. As well as being used on the earlier models of Gleaner combines,
there has been excellent success with them on the more recent models, where
idler bearing pulleys and sprockets were being used. This Plastic Wear Block can
defini ely reduce your operating costs since the Plastic Wear Block is priced
considerably lower than the current idler bearing.
800.368.7773
Product ID
Description
CBM500000
Plastic wear block
Price
$6.95
HCC PADDLE TINES
High Performance Tines for Short or Sparse Crops
Maximized Pickup
• The “Paddle” is a cost-effective alternative to the standard pickup reel tine when crop
conditions make harvesting difficult and ineffi
t.
• The “Paddle” is 6 inches wide to lift and feed crop that standard tines miss. With full crop
contact, feeding into the header is positive and even. Increase your harvest in light, sparse,
or special crop conditions.
• The “Paddle” is designed to provide a complete sweep of the header with each reel rotation.
By limiting the number of “Paddles” used, you save installation time and money.
• Installation is fast and easy with HCC’s patented tine mounting system. Remove one screw
and replace the standard tine with a “Paddle” tine. In less than one hour, you can easily
replace enough standard tines with “Paddle” tines to dramatically improve your harvest.
Original tines can be used for spares or reinstalled, as needed.
Original Tine Spacing
Reel Width
18’
20’
25’
30’
36’
4.5”
40
40
50
60
N/A
6.0”
30
40
40
50
60
The “Paddle” is packaged ten to a box
and includes “Paddles”, screws and
complete installation instructions.
HCC Paddle Tines
The “Paddle” offers several
advantages over standard tines
including:
• Increased Harvest
• Improved Feeding
• Cleaner Cutterbar
• Faster Harvesting
Paddle Tines, 10-pack, Polytine reel (1)
$62.50
HCC783845
Paddle Tines, 10-pack, ML reel (3)
$58.00
HCC783846
Paddle Tines, 10-pack, Level II reel (4)
$58.00
HCC783949
Paddle Tines, 10-pack, wood bat reel (5) $60.00
HCC REPLACEMENT REEL TINES
HCC OEM Replacement Reel Tines
(1)
(2)
(3)
The Paddle is designed to provide
a complete sweep of the header
with each rotation. By limiting the
number of Paddles used, you save
installation time & money.
Price
HCC783950
HCC224014 Polytine reel tine (1)
Price
$1.40
HCC224015 Love reel tine (2)
$3.85
HCC224016
HCC224017
HCC224018
HCC224019
ML reel tine, double wing (3)
ML reel tine, right hand wing (3)
ML reel tine, left hand wing (3)
ML reel tine, no wing (3)
$2.14
$2.55
$2.55
$3.28
HCC224047
HCC224048
HCC224049
HCC224050
Level II reel tine, full wing (4)
Level II reel tine, left hand wing (4)
Level II reel tine, right hand wing (4)
Level II reel tine, no wing (4)
$2.73
$2.92
$2.92
$2.92
HCC480056 Wood bat steel tine (5)
HCC480057 Clip, for wood bat steel tine (5)
$2.52
$0.29
Installation hardware included.
(4)
(5)
Reel Tine Identifi ation
(1) Polytine Reels have a teardrop shaped metal bat with notches spaced 4.5” (114 mm) apart. The tines fit i to the notches and are fastened to the back of the
metal bat approximately 3” (76 mm) above the notch. Supplied from 1984-1989.
(2) Love Reels have a sheet metal bat and the tine fastens over the bottom edge. There is a projection that fits i to a hole on the front of the bat approximately 2.5”
(64 mm) above the edge. The Love Reel was not manufactured by HCC Inc.
(3) ML Reels have a 1.375” (35 mm) tube with 0.4” (10 mm) round holes spaced approximately 4.5” (114 mm) apart. The tines have a round nub that fits into a round
hole in the tube. Supplied from 1989-1999.
(4) Level II Reels have a 1.375” (35 mm) tube with 0.5” (12.7 mm) hex holes spaced 6.0” (152 mm) apart. The tines have a hex nub that fits i to a hex hole in the
tube. Standard since 1999/2000.
(5) Wood Bat Reels have a wood bat with steel tines spaced approximately 4.5” (114 mm) apart. The tines are pressed into the bat and there is a metal clip riveted
to the bat to provide support to the tine.
www.sidist.com
45
HCC FIELD TRACKER
The HCC Field Tracker is designed for CaseIH combines to allow headers to automatically tilt 4 degrees right and left to follow
the contour of the ground. This is especially important with today’s wider headers
and around-the-clock harvesting.
Field Tracker products are custom designed to fit the fun tion and quality requirements of Case-IH customers with cost
effective performance for the end user. The
HCC Field Tracker has electronic and hydraulic components that provide reliable,
high speed response to “track” the fiel .
HCC Field Tracker Notes
1) HCC002213 Hydraulic Update Kit required for 1640
combines S/N JJC0097190 and above; 1660 combines S/N JJC0103800 and above; 1680 combines
S/N JJC0117060 and above; all 1644, 1666 and 1688
combines.
2) HCC002207 Feeder Adapter Kit required for combines 1640, 1644, 1660 and 1666.
3) HCC002237 Conversion Package required for
combines 2144 and 2166.
4) HCC002237 Conversion Package required for
combines 2188.
5) HCC002208 Flex Head Sensor Kit required for 1020
headers S/N before JJC0215001.
6) Corn Head Adapter Kit required. These are
mechanical tilt kits only. Sensor kit and PTO sold
separately.
7) HCC002220 Flex Head Sensor Kit required for 1020
headers S/N JJC0215001 and above.
8) HCC002219 Corn Head Sensor Kit replaces Case-IH
1994880C4.
9) Sensor Replacement Kits to replace Case-IH
100283A1 depending on where it is used.
Product ID OEM #
HCC Field Tracker for Case-IH Combines
Description
Model
Notes
Price
Field Tracker Packages
HCC002005 1994874C3 Field Tracker Package 1640, 1644, 1660, 1666, 1680, 1688
1, 2 $5,493.85
HCC002013 282718A3 Field Tracker Package 2144, 2166, 2344, 2366
3
$5,896.68
HCC002015 282723A2 Field Tracker Package 2188, 2377, 2388, 2577, 2588
4
$5,911.99
Field Tracker Adapters
HCC002207 1994875C1 Feeder Adapter Kit
1640, 1644, 1660, 1666
2
$300.97
HCC002213 106256A1 Hydraulic Update Kit 1640, 1644, 1660, 1666, 1680, 1688
1
$576.16
Field Tracker Conversion Package
Field Tracker ConverHCC002237 282727A1
2144, 2166, 2188
3, 4
$128.10
sion Package
Replacement Field Tracker Frame Assemblies
Field Tracker Frame
HCC800288 144254A3
2188, 2388, 2588
$2,807.48
Assembly
Field Tracker Frame
HCC800290 188075A4
2144, 2166, 2344, 2366
$2,807.48
Assembly
Flex Head Kits
HCC002208 1994876C1 Flex Head Sensor Kit 1020, S/N before JJC0215001
5
$532.26
HCC002220 143154A1 Flex Head Sensor Kit 1020, S/N JJC0215001 and above
7
$533.92
Corn Head Kits
Corn Head Adapter
HCC002214 113620A3
1044
6
$760.19
Kit
Corn Head Adapter
HCC002215 113622A3
1064, 1084
6
$1,312.73
Kit
Corn Head Adapter
HCC002216 113621A3
1063
6
$1,026.28
Kit
Corn Head Adapter
HCC002217 113623A3
1083
6
$1,237.50
Kit
Corn Head Sensor Kit
HCC002219 187101A3
1600, 2100, 2300 series
8
$826.63
with Height Control
Corn Head Sensor
1600 series to fit 2100 or 2300
HCC002221 188061A3
$386.25
Retrofit it
series
Miscellaneous Sensor Kits
Sensor Replacement Replaces 100283A1 old style
HCC002242 87458774
9
$226.89
Kit, Corn Head
potentiometer
9
$226.89
HCC002243 87458775
potentiometer
Kit, Grain Head
HCC002244 87458776
9
$226.89
Kit, Self Center
potentiometer
THE SURE STOP
FEATURES:
• 90 Decibel Alarm & LED Light Signals Your Exact
Stopping Position
• Operates on 110V, 8‐Foot Cord Included
• Weather Resistant
• Proven Technology for 10+ Years
• Accurate up to 13 Feet
• Includes 4 Pieces of Refle tive Tape
Tri‐Pod
Not
Included
APPLICATIONS:
•
•
•
•
•
Trailer Placement under Bins
Trailer Placement over Pit Screws
Alignment with Transport Augers
Alignment on Truck Scales
Permanent Mount or Portable with Optional Tri‐Pod (not included)
800.368.7773
Product ID
Description
WPS100000
WPS200000
Sure Stop
$595.00
Refle tive Tape, 8” piece
$1.50
Price
HCC GATEWAY SIEVES & CHAFFERS
Gateway™ Sieves & Chaffers offer a number of advantages
over standard steel sieves and chaffers including:
Made By
•
•
•
•
•
•
Lightweight – up to 50% lighter
Rustproof – made of plastic slats
Less chaff build-u
Improved grain cleaning
Infini ely adjustable slats
Easy to repair- main frame bolts together
The Gateway® Sieves aluminum / plastic construction is up to 50% lighter
than most OEM steel frame construction, making it easier to change sieves and
chaffers for various crops. This is especially important when harvesting a variety of grains
in all types of crop and weather conditions.
The smooth, plastic slats offer less resistance than conventional steel teeth, which helps
prevent build-up. They perform well when cleaning both lighter crops (small grain) and heavy
crops (high-yield corn).
Two slat design options for a
variety of crops. The “LT” (top
45mm) and “ST” (bottom
33mm) are available.
Easy-to-use adjuster(s) on each frame allow you to quickly and accurately change the louver
angle. Depending on the combine model, more than one adjuster may be used.
Modular construction allows for easy and cost-effective
repair. All components on Gateway® Sieves are replaceable
for fast, economical repair. Slat connectors allow consistent
and precise slat adjustment for infini e angles and optimal
cleaning performance.
Why spacing options?
Narrow spacing (33mm) is used for small grains such as
wheat, alfalfa and cereal grains. Use 33mm short tooth top
chaffer and 33mm short tooth bottom sieve.
Handle makes it easy to
adjust slats.
Modular construction permits
easy and cost-effective repair.
Wide spacing (45mm) is used for large crops such as corn
and soybeans; provides faster operation through highyielding crops. Use 45mm long tooth top chaffer and
33mm long tooth bottom sieve.
Product ID
HCC406001
HCC406002
HCC409000
HCC409001
HCC409002
HCC409003
HCC409004
HCC409005
HCC212366
Gateway Service Parts
Product ID
Slat, Short Tooth, 28”
Slat, Long Tooth, 28”
Connector, Female
Connector, Male
Center Connector, Long
Center Connector, Short
End Connector, RH
End Connector, LH
Push Nut, .25 diameter
Price
$9.15
$9.15
$2.87
$2.87
$1.80
$1.80
$2.87
$2.87
$0.52
Currently available for most combines. Please check our website
www.sidist.com or call for current pricing on specific ma es and models.
Slats are infini ely adjustable to
match your specific c op needs. Slat
opening is uniform and repeatable.
The number of adjustment controls
will match most units.
Slat connectors are durable and
provide reliable adjustment
consistency. All components are
replaceable for quick and economic
repair.
www.sidist.com
47
HCC ORBIT TRAC II REEL KIT
Eliminating the Reel - Auger Gap
Harvest more crop in less time. The
Orbit™ Trac II Reel closes the gap
between the reel and the auger
to provide more control of crop
entry into the header. By creating
a continuous crop fl w, the Orbit™
Trac II Reel provides the best overall
performance, especially harvesting
tough crops.
Go with the fl w. The
Orbit Trac II™ allows you to
harvest more crop in less
time:
• Positively places crop
into auger
• Reduces or eliminates
slugging
• Resists wrapping in
green crop
• On-farm installation in
a few hours
• Lower Half of Track is
Now Made of Steel!
800.368.7773
The Orbit™ Trac II Reel is tailored to today’s highperformance headers. Crop fl w is positive. Build-up
and slugging are reduced. The old-fashioned reel
design has been replaced with a double-track system.
The unique shape allows reel tines to swing directly
past the auger. This pushes crop directly into the
auger instead of dropping onto the header floor
where it creates build-up. Installation is easy and can
be done on equipment you already own. Designed as
a retro-fit or all HCC tube-type reels built since 1990. The ML 4-1/2” tine spacing reels
or Level II 6” tine spacing reels are designed to work with the Orbit Kit.
Price
AGCO 400-8000 Series
HCC031371 AGCO, 400, 500, 800, 8000 series, 25-35’
$2,795.29
HCC031372 AGCO, 400, 500, 800, 8000 series, 22’ & shorter
$1,466.50
AGCO 8200
HCC031373 AGCO, 8200 series, 25-35’
$2,793.62
HCC031396 AGCO, 8200 series, 20’ & shorter
$1,465.72
Case-IH 1010 & 1020 (Verify single eccentric or double eccentric reel.)
1994 & prior, 22’ & longer
HCC031382 Case-IH,
$2,794.87
1010 headers (-JJC0200000) & 1020 headers (-JJC0215000)
1994 & prior, 20’ & shorter
HCC031383 Case-IH,
$1,466.32
1010 headers (-JJC0200000) & 1020 headers (-JJC0215000)
Case-IH,
1995-1997,
22’
&
longer
HCC031380 1010 headers (JJC0200001-JJC0300000) & 1020 headers (JJC0215001-JJC0315000)
$2,796.16
1995-1997, 20’ & shorter
HCC031381 Case-IH,
$1,466.88
1010 headers (JJC0200001-JJC0300000) & 1020 headers (JJC0215001-JJC0315000)
Case-IH,
1998
&
newer,
22’
&
longer
HCC031369 1010 headers (JJC0300001- & CBJ023001-) & 1020 headers (JJC0315001- & CBJ023003-)
$2,795.99
1998 & newer, 20’ & shorter
HCC031370 Case-IH,
$1,466.73
1010 headers (JJC0300001- & CBJ023001-) & 1020 headers (JJC0315001- & CBJ023003-)
Case-IH 2010 & 2020
HCC031376 Case-IH, 2010, 2020, 22-35’
$2,794.76
HCC031377 Case-IH, 2010, 2020, 20’ & shorter
$1,466.21
Case-IH 3020
HCC031532 Case-IH, 3020, 25-35’
$2,795.12
HCC031533 Case-IH, 3020, 20’
$1,466.24
Honey Bee
HCC031385 Honey Bee, double eccentric
$2,793.70
John Deere 600 Series
HCC031374 John Deere, 600 series, 25’ & longer (Will not fit lex Draper)
$2,793.41
HCC031375 John Deere, 600 series, 22’ & shorter (Will not fit lex Draper)
$1,467.02
HCC031603 John Deere, 640 FD Flex Draper, 40’
$2,792.91
HCC031367 John Deere, 900 series, (serial # 645301-) 25’ & longer
$2,794.91
HCC031368 John Deere, 900 series, (serial # 645301-) 22’ & shorter
$1,467.22
Massey Ferguson
HCC031388 Massey Ferguson, draper, double eccentric
$2,793.68
HCC031384 Massey Ferguson, 1859, single eccentric
$1,465.80
HCC031373 Massey Ferguson, 8200 series, 25-35’
$2,793.62
HCC031396 Massey Ferguson, 8200 series, 20’ & shorter
$1,465.72
New Holland
HCC031378 New Holland, 970-973, 25’ & longer
$2,795.23
HCC031379 New Holland, 970-973, 22’ & shorter
$1,466.47
HCC031376 New Holland 72C, 74C, 22-35’
$2,794.76
HCC031377 New Holland 72C, 74C, 20’ & shorter
$1,466.21
HCC031400 New Holland 73C, 22’ & longer
$2,794.79
HCC031401 New Holland 73C, 20’ & shorter
$1,466.25
HCC031532 New Holland 740CF, 22’ & longer
$2,795.12
HCC031533 New Holland 740CF, 20’ & shorter
$1,466.24
Orbit Trac II Update Kits
HCC031410 Orbit Trac II Update Kit, Double Eccentric (Steel track for bottom half of Orbit Reel)
$505.95
HCC031411 Orbit Trac II Update Kit, Single Eccentric, LH (Steel track for bottom half of Orbit Reel)
$252.97
HCC031412 Orbit Trac II Update Kit, Single Eccentric, RH (Steel track for bottom half of Orbit Reel)
$252.97
Note: The Orbit Trac II Reel kit has the bottom half of the track made out of steel. The Orbit Trac II Reel kit is designed
only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
HCC COMPLETE ORBIT TRAC II REEL
For Combines and Swathers - Smoother crop fl
w, Less downtime & superior component strength
HCC Orbit™ Trac II Reels excel in moving crops into the combine. New design concepts effectively divide, lift, and feed standing or down crops,
including soybeans, canola, wheat, lentils, irrigated crops, rice, and milo. Dependability and lower maintenance result from fewer parts and
tough polymer tines made with exclusive material. HCC Orbit™ Trac II Reels have advantages such as 35-40% improved visibility, up to 25%
less weight to decrease load on harvesting equipment, and superior bat strength versus sheet metal or aluminum. The HCC Orbit™ Trac II Reel
provides lower cost, more effective crop movement, and less down time for combines and swathers. The Orbit™ Trac II Reel closes the gap
between the reel and the auger to provide more control of crop entry into the header. By creating a continuous crop fl w, the Orbit™ Trac II Reel
provides the best overall performance, especially harvesting tough crops.
Product ID
Product Description
AGCO 400-8000 Series
HCC031392
Orbit II attaching package, AGCO, 25’ & 30’
25’
HCC030561
Reel bundle, Level II, AGCO, CIH, 25’
HCC031392
Orbit II attaching package, AGCO, 25’ & 30’
30’
HCC030581
AGCO 8200
HCC031397
Orbit II attaching package, AGCO 8200, 25’ & 30’
25’
HCC030561
HCC031397
Orbit II attaching package, AGCO 8200, 25’ & 30’
30’
HCC030581
HCC031395
Orbit II attaching package, AGCO 8200, 35’
35’
HCC032082
Reel bundle, Level II, AGCO 8200, 35’
Case-IH 1020 (1)
HCC031387
Orbit II attaching package, CIH 1020, 25’ & 30’
25’
HCC030561
HCC031387
30’
HCC030581
Case-IH 2020
HCC031393
25’
HCC030560
Reel bundle, Level II, CIH 2020, 25’
HCC031393
30’
HCC030580
Reel bundle, Level II, CIH, JD, NH, 30’
HCC031398
Orbit II attaching package, CIH 2020, 35’
35’
HCC032023
Case-IH 3020
HCC031534
Orbit II attaching package, CIH 3020, NH 740CF, 25’ & 30’
25’
HCC030562
HCC031534
30’
HCC030582
Reel bundle, Level II, AGCO, JD, CAT, HB, NH, 30’
HCC031535
Orbit II attaching package, CIH 3020, NH 740CF, 35’
35’
HCC032023
John Deere 600 Series (Will not fit lex Draper)
HCC031389
Orbit II attaching package, JD 600, 25’ & 30’
25’
HCC030562
HCC031389
30’
HCC030582
HCC031402
Orbit II attaching package, JD 600, 35’
35’
HCC032023
HCC031390
25’
HCC030562
HCC031390
30’
HCC030580
New Holland 740CF
HCC031534
25’
HCC030562
HCC031534
30’
HCC030582
HCC031535
Orbit II attaching package, CIH 3020, NH 740CF, 35’
35’
HCC032023
Pkg. Price
Total Price
$4,238.05
$2,144.15
$4,238.05
$2,481.91
$4,127.54
$2,144.15
$4,127.54
$2,481.91
$5,171.94
$3,581.76
$4,423.16
$2,144.15
$4,423.16
$2,481.91
$4,459.65
$2,100.59
$4,459.65
$2,336.77
$5,236.88
$3,588.18
$4,615.04
$1,993.70
$4,615.04
$2,499.06
$5,633.26
$3,588.18
$4,254.73
$1,993.70
$4,254.73
$2,499.06
$5,348.46
$3,588.18
$4,344.87
$1,993.70
$4,344.87
$2,336.77
$4,615.04
$1,993.70
$4,615.04
$2,499.06
$5,633.26
$3,588.18
$6,382.20
$6,719.96
$6,271.69
$6,609.45
$8,753.70
$6,567.31
$6,905.07
$6,560.24
$6,796.42
$8,825.06
• Lower Weight
• Stronger Construction
• Increased Visibility
• More Effective Crop
Movement
$6,608.74
$7,114.10
$9,221.44
$6,248.43
$6,753.79
$8,936.64
$6,338.57
$6,681.64
$6,608.74
$7,114.10
$9,221.44
Advance Engineering has
allowed a stronger reel with
fewer parts. Steel tine reel
option also available.
Lighter weight reels require
less horsepower and lower
drive loads.
Made By
1) For Case-IH headers 1998 and newer with serial number #JJC0315001 & CBJ023003 and up.
Please call for complete Reel replacement options for other combines and swathers not listed above.
Note: The Orbit Trac II Reel kit has the bottom half of the track made out of steel.
The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels.
They have been original equipment on most headers since 1990.
www.sidist.com
49
HCC FLIP REEL KIT
Eliminate Crop Wrapping Around Bat Tubes
The Flip Reel Kit is designed to eliminate wrapping around bat
tubes and is particularly effective in canola and other tall, stringy
crops.
Installation is easy and can be done on equipment you already
own. Designed as a retro-fit or all HCC tube-type reels built
since 1990. ML 4-1/2” tine spacing or Level II 6” tine spacings are
designed to work with the Flip Reel Kit. You can install it yourself
in just a few hours using the Installation Instruction Manual.
HCC Flip Reel Kit
AGCO
HCC031515
HCC031520
HCC031510
HCC031521
HCC031511
HCC031522
Price
AGCO, 400, 500, 800, 8000 series, double eccentric
AGCO, 400, 500, 800, 8000 series, single eccentric
AGCO, 8200, 9250 series, double eccentric
AGCO, 8200, 9250 series, single eccentric
AGCO, 5100, 5200 draper, double eccentric
AGCO 5100, 5200 draper, single eccentric
$1,936.75
$1,052.13
$2,105.41
$1,135.89
$1,989.53
$1,078.52
Case-IH, 1010, 1020, 3020, double eccentric
Case-IH, 1010, 1020, 3020 single eccentric
Case-IH, 2010, 2020, double eccentric
Case-IH, 2010, 2020, single eccentric
$1,957.40
$1,052.13
$1,957.40
$1,071.63
Honey Bee, clamp mounted, double eccentric
Honey Bee, bracket mounted, double eccentric
$2,134.10
$2,154.75
John Deere, 600 fl x series, 900 draper, double eccentric
John Deere, 600 fl x series, single eccentric
John Deere, 900 series, double eccentric
John Deere, 900 series, single eccentric
John Deere, fl x draper; 625FD, 630FD, 635FD, double eccentric
John Deere, fl x draper; 640FD, double eccentric
$2,048.04
$1,103.76
$2,517.31
$1,550.00
$2,090.08
$2,081.78
Case-IH
HCC031516
HCC031520
HCC031517
HCC031523
Honey Bee
HCC031357
HCC031513
John Deere
HCC031518
HCC031524
HCC031519
HCC031525
HCC031365
HCC031351
New Holland
Flip Reel
Standard Reel
• Eliminates crop wrapping around bat tubes
• Designed to fit H C tube type reels built
since 1990
HCC031515 New Holland, 971, 973, double eccentric
HCC031520 New Holland, 971, 973, single eccentric
HCC031517 New Holland 72C, 74C, double eccentric
HCC031523 New Holland 72C, 74C, single eccentric
HCC031515 New Holland 73C, double eccentric
HCC031520 New Holland 73C, single eccentric
HCC031516 New Holland 740 CF, double eccentric
HCC031520 New Holland 740 CF, single eccentric
End Shield Kit (Recommended)
HCC031591 End Shield Kit, double eccentric
HCC031600 End Shield Kit, single eccentric
$1,936.75
$1052..13
$1,957.40
$1,071.63
$1,936.75
$1,052.13
$1,957.40
$1,052.13
$738.39
$421.18
BURVEE BUBBLE-UP AUGER
Completely Fill Your Grain Bin Extension
E
TH INAL
G
I
OR
• Reduces grain damage
• Reduces wear & load on combine bin fill s stem
• Utilizes “super edge” helicoid for longer wear
• Large trouble free orbit motor for high torque
• Mounting brackets attach quickly & easily
• Installs in less than one hour
• Quickly folds down lower than the cab
• Includes a one year warranty
The Bubble-Up Auger Fits All Popular Makes - Regardless of Their Bin Fill System.
Burvee Bubble-Up Auger
Product ID
Description
BRV500100
Bubble-Up Auger
Price
Product ID
Description
BRV500200
Hydraulic kit for John Deere 20 series
$150.00
BRV500300
Hydraulic kit for John Deere 9000 series
$200.00
BRV500400
Hydraulic kit for IH/Case-IH, before mid-1995 (1400, 1600)
$150.00
BRV500500
Hydraulic kit for Case-IH, mid 1995-2000
$200.00
BRV500600
Hydraulic kit for Case-IH, 2001-current
$200.00
BRV500700
Hydraulic kit for New Holland, TR96, TR97, TR98
$200.00
BRV500900
Hydraulic kit for other makes (specify make, model and year)
$200.00
$895.00
Optional Hydraulic Kits
Mounting Brackets
Attach Quickly
Reduces Grain Damage
Relieves Wear & Load
800.368.7773
Allows Bubble-Up Auger to operate at full speed when harvesting small grain.
Price
STALK STOMPERS
Knock down corn stalks ahead of combine and
tractor tires preventing tire stubble damage.
Call For Pricing!
•All components are made of high quality steel
•Bottom of each shoe is lined with 1/4” thick poly
•No-Tillage application for residue management
POLY SKID SHOES
•Replacement for OEM
•Machine cut
•Solid UHMW Poly
•Formed to fit our head
•Available predrilled or undrilled.
•Sold in complete kits or as individual
replacement parts
•We carry an extensive line of brands and
models
Call For Pricing!
PRO CHUTE
Empty your seed boxes directly into your planter.
Used for loading and unloading your planter. Seed fl ws smoothly
and quickly when you attach the PRO Chute to your bulk seek box. The
funnel system is made of UHMW for durability, wear resistance, and slick
properties. In as little as two minutes you can empty your seed box with the
PRO Chute II.
Call For Pricing!
www.sidist.com
51
MAGNOJET SPRAY NOZZLES
New
Product
•
•
•
•
Ceramic spray nozzles at affordable prices.
Highest quality 99% alumina ceramic.
Ceramic nozzles last 5-15 times longer.
All MagnoJet nozzles are pre-orifi ed. This reduces internal pressure, produces
larger droplets and can reduce drift by 50%.
• Full line of standard and air inducted spray nozzles; fl t fan, twin outlet, super turbo,
flood defl tor.
• All MagnoJet nozzles meet International Standards and use Standard Color Codes.
MagnoJet Spray Nozzles
Product ID Vendor ID Color
Price
Lowered Drift Flat Fan 80° Standard
MNJ220110
BD-01
Orange $4.18
MNJ220115 BD-015
Green $4.18
MNJ220120
BD-02
Yellow $4.18
MNJ220130
BD-03
Blue
$4.18
MNJ220140
BD-04
Red
$4.18
MNJ220150
BD-05
Brown $4.18
Also available in 110° nozzles
Anti-Drift Flat Fan 80° Air Inducted
MNJ211810 AD-IA-01 Orange $10.32
MNJ211815 AD-IA-015 Green $10.32
MNJ211820 AD-IA-02 Yellow $10.32
MNJ211825 AD-IA-025 Lilac $10.32
MNJ211830 AD-IA-03
Blue $10.32
MNJ211840 AD-IA-04
Red $10.32
MNJ211850 AD-IA-05 Brown $10.32
MNJ211860 AD-IA-06
Gray $10.32
Anti-Drift Flat Fan 110° Standard
MNJ200110
AD-01
Orange $4.18
MNJ200115 AD-015
Green $4.18
MNJ200120
AD-02
Yellow $4.18
MNJ200130
AD-03
Blue
$4.18
MNJ200140
AD-04
Red
$4.18
MNJ200150
AD-05
Brown $4.18
Anti-Drift Flat Fan 110° Air Inducted
MNJ211110 AD-IA-01 Orange $10.32
MNJ211115 AD-IA-015 Green $10.32
MNJ211120 AD-IA-02 Yellow $10.32
MNJ211125 AD-IA-025 Lilac $10.32
MNJ211130 AD-IA-03
Blue $10.32
MNJ211140 AD-IA-04
Red $10.32
MNJ211150 AD-IA-05 Brown $10.32
MNJ211160 AD-IA-06
Gray $10.32
Twin Outlet Flat Fan 110° Standard
MNJ300110 AD-01.D Orange $7.27
MNJ300115 AD-015.D Green $7.27
MNJ300120 AD-02.D Yellow $7.27
MNJ300125 AD-025.D
Lilac
$7.27
MNJ300130 AD-03.D
Blue
$7.27
MNJ300140 AD-04.D
Red
$7.27
MNJ300150 AD-05.D Brown $7.27
MNJ300160 AD-06.D
Gray
$7.27
MNJ300180 AD-08.D
White
$7.27
Twin Outlet Flat Fan 110° Air Inducted
MNJ311110 AD-IA/D-01 Orange $11.64
ADMNJ311115
Green $11.64
IA/D-015
MNJ311120 AD-IA/D-02 Yellow $11.64
ADMNJ311125
Lilac $11.64
IA/D-025
MNJ311130 AD-IA/D-03 Blue $11.64
MNJ311140 AD-IA/D-04 Red $11.64
MNJ311150 AD-IA/D-05 Brown $11.64
800.368.7773
Color
Super Turbo Flat Fan 135° Standard
MNJ400310
ST-01
Orange
MNJ400315
ST-015
Green
MNJ400320
ST-02
Yellow
MNJ400325
ST-025
Lilac
MNJ400330
ST-03
Blue
MNJ400340
ST-04
Red
MNJ400350
ST-05
Brown
MNJ400360
ST-06
Gray
Super Turbo Flat Fan 140° Air Inducted
MNJ411310 ST-IA-01
Orange
MNJ411315 ST-IA-015
Green
MNJ411320 ST-IA-02
Yellow
MNJ411325 ST-IA-025
Lilac
MNJ411330 ST-IA-03
Blue
MNJ411340 ST-IA-04
Red
Defle tor/Flood 130° Standard
MNJ500310 MDC-1.0
Yellow
MNJ500315 MDC-1.5
Blue
MNJ500320 MDC-2.0
Red
MNJ500325 MDC-2.5
Brown
MNJ500330 MDC-3.0
Gray
MNJ500340 MDC-4.0
White
MNJ500350 MDC-5.0
Light Blue
MNJ500375 MDC-7.5
Light Green
Defle tor/Flood 150° Air Inducted
MNJ511310 TM-IA-1.0
Yellow
MNJ511315 TM-IA-1.5
Blue
MNJ511320 TM-IA-2.0
Red
MNJ511325 TM-IA-2.5
Brown
MNJ511330 TM-IA-3.0
Gray
MNJ511340 TM-IA-4.0
White
MNJ511350 TM-IA-5.0
Light Blue
MNJ511375 TM-IA-7.5
Light Green
MagnoJet Quick Coupling Caps
MNJ000110
M-223
White; AD
MNJ000111
M-224
MNJ000112
M-231
MNJ000100
MNJ000101
MNJ000102
Green; AD-IA, ADIA/D, ST-IA, TM-IA
Yellow; AD-D, ST,
MDC
MagnoJet Filters
M-142
Red; 50 Mesh
M-143
Blue; 80 Mesh
M-144
Green; 100 Mesh
Price
$5.88
$5.88
$5.88
$5.88
$5.88
$5.88
$5.88
$5.88
$10.32
$10.32
$10.32
$10.32
$10.32
$10.32
$4.92
$4.92
$4.92
$4.92
$4.92
$4.92
$4.92
$4.92
$11.64
$11.64
$11.64
$11.64
$11.64
$11.64
$11.64
$11.64
$0.98
$1.48
$0.98
$0.81
$0.81
$0.81
MagnoJet Rubber Seals
MNJ000103
M-217
For all caps
$0.26
THE ADVANTAGES OF CERAMICS FOR
AGRICULTURAL SPRAYING
A large percentage of farmers are using GPS
guidance systems on their tractors, sprayers
and combines. These systems can place seeds,
herbicides, insecticides and fertilizer accurately
to within fractions of an inch. And yet expensive
sprayers are still being equipped with spray nozzles
that only last from 200 to 500 acres before they
should be replaced with new nozzles.
Why not look at spray nozzle capabilities in
the same way, only without anywhere near the
investment? Simply put, if you can spray 100 acres
with stainless steel, then you should be able to
spray 500 acres with HD plastic and you should be
able to spray 1,600 acres or more with ceramic! Just
the down time to change the spray nozzles makes
MagnoJet ceramic nozzles a great bargain.
CERAMIC SPRAY NOZZLES CAN SAVE
CHEMICALS
Chemical costs have gone through the roof, so you
must do a good job of applying your chemicals.
Spraying expensive farm fungicides and insecticides
with inferior spray nozzles, makes no business sense
and will produce poor results and poor results can
be devastating to your yields. You are using the
best chemicals and yet not utilizing the best spray
nozzles for the job.
ALL MAGNOJET CERAMIC NOZZLES ARE PREORIFICED
Pre-orifi ed nozzles are better because this reduces
the pressure inside the nozzle which produces
larger droplets that can reduce drift by 50 percent.
It also reduces the wear on the spray nozzle tip.
Reduces Drift – Longer Lasting
Save Time Not Changing Nozzles as Often
Easy Removal of Pre-Orifi e for Cleaning
BETTER SPRAY PATTERNS
As spray nozzles wear their spray patterns and
droplet sizes change and diminish the effectiveness
of the spray. High quality MagnoJet ceramic spray
nozzles can last 5 to 15 times longer than plastic or
stainless nozzles.
NOTE: Not compatible with the Wilger Combo-Jet®
system.
RADURA DISC MOWER BLADES
Product ID
RSP041864
RSP041870
RSP041874
RSP041879
RSP041882
RSP041887
RSP041895
RSP041896
RSP041899
RSP041926
RSP041928
RSP041966
RSP041967
RSP041973
RSP041974
RSP041986
RSP041987
RSP042006
RSP042007
RSP042010
RSP042011
RSP042014
RSP042015
RSP042018
RSP042019
RSP042022
RSP042026
RSP042030
RSP042031
RSP042034
RSP042037
RSP042049
RSP042050
RSP042051
RSP042052
RSP042055
RSP042056
RSP042057
RSP042059
RSP042064
RSP042066
RSP051238
RSP051239
RSP052697
RSP052698
Radura Disc Mower Blades
Application
Width Length Hole Size
Claas, Deutz-Fahr, Fella, Krone
Flat 1.575 3.780
0.748
Deutz-Fahr
LH 1.575 3.780
0.748
Deutz-Fahr
LH 1.575 3.543
0.748
Greenland, John Deere, Kuhn, Massey
LH 1.575 3.425
0.640
Ferguson, New Holland, PZ Zweegers
Greenland, John Deere, Kuhn, Massey
RH 1.575 3.425
0.640
Ferguson, New Holland, PZ Zweegers
Deutz-Fahr SM55
Flat 1.575 3.780
0.748
Galfre, Maragon, 108D
Flat 1.811 4.252
0.827
Galfre, Maragon, 108P
Flat 1.811 4.252
0.827
PZ Zweegers
Dome 1.811 4.134
0.827
Gehl, John Deere, Kuhn, New Holland,
LH 1.772 3.740
0.640
Sitrex
Gehl, John Deere, Kuhn, New Holland,
RH 1.772 3.740
0.640
Sitrex
Marangon, 105 MEL
LH 1.890 4.134
0.827
Marangon, 105 MER
RH 1.890 4.134
0.827
Krone
LH 1.890 4.409
0.748
Krone
RH 1.890 4.409
0.748
Case-IH, New Holland
LH 1.969 4.331
0.896
RH 1.969 4.331
0.896
0.725
Vicon
LH 1.890 4.213
Vicon
RH 1.890 4.213
0.725
Case-IH, Challenger, Gehl, Hesston,
RH 1.850 4.213
0.728
Massey Ferguson, New Idea
Case-IH, Challenger, Gehl, Hesston,
LH 1.850 4.213
0.728
Claas DISCO 210/250/260/290/300/340/3
RH 1.890 4.527
0.748
000/3050/8500
Claas DISCO 210/250/260/290/300/340/3
LH 1.890 4.527
0.748
000/3050/8500
Fella
LH 1.890 4.173
0.748
Fella
RH 1.890 4.173
0.748
Case-IH, Challenger, Gehl, Hesston, John
Deere, Kuhn, Massey Ferguson, New HolLH 1.772 4.213
0.717
land, New Idea
Case-IH, Challenger, Gehl, Hesston, John
Deere, Kuhn, Massey Ferguson, New HolRH 1.772 4.213
0.717
land, New Idea
AGCO, Case-IH, Challenger, Hesston,
RH 1.850 4.213
0.728
LH 1.850 4.213
0.728
Gehl, John Deere, Kuhn, New Holland
LH 1.772 4.843
0.717
Gehl, John Deere, Kuhn, New Holland
RH 1.772 4.843
0.717
RH 1.890 4.252
0.718
LH 1.890 4.252
0.718
Krone
LH 1.969 3.780
0.748
0.748
Krone
RH 1.969 3.780
RH 1.969 4.331
0.896
LH 1.969 4.331
0.896
AGCO, Bush Hog, Challenger, Hesston,
RH 1.969 4.724
0.906
AGCO, Bush Hog, Challenger, Hesston,
LH 1.969 4.724
0.906
Bush Hog, Case-IH, Fella, Gehl, Greenland,
LH 1.890 4.724
0.728
Lely, Massey Ferguson, New Idea, Vicon
Bush Hog, Case-IH, Fella, Gehl, Greenland,
RH 1.890 4.724
0.728
Lely, Massey Ferguson, New Idea, Vicon
Galfre
LH 1.929 4.213
0.827
Galfre
RH 1.929 4.213
0.827
Bush Hog, Case-IH, Challenger, Hesston,
RH 1.969 4.724
0.896
Bush Hog, Case-IH, Challenger, Hesston,
LH 1.969 4.724
0.896
Please specify make and model so correct blade(s) can be selected.
Price
$1.05
$1.20
$1.10
$1.23
$1.23
$1.43
$1.80
$1.80
$1.40
$1.65
$1.65
$2.08
$2.08
$2.00
$2.00
$2.13
$2.13
$2.10
$2.10
$2.10
$2.10
$1.78
$1.78
$2.00
$2.00
$2.00
$2.00
$2.10
$2.10
$2.08
$2.08
$2.10
$2.10
$1.80
$1.80
$2.13
$2.13
Rolled Edges for Greater Strength
and Durability with Less Chipping
and Breakage than other Brands
with Ground Edges.
The trademark RADURA® is world famous for
disc mower blades with a long service life and
a clean cut.
A special cold rolling process of the cutting
edges on the RADURA® blade results in a more
durable cutting edge and maintains a sharp
edge longer than blades with ground edges.
RADURA® blades are used by the leading disc
mower manufacturers and are the first choi e
in the replacement market worldwide.
Advantages of RADURA® quality blades
•Highest wear life due to special edge
making process
•Maximum safety due to rigorous quality
control and testing
•Tens of millions used by OEM and
aftermarket customers
•Excellent corrosive protection
$1.95
$1.95
$1.98
$1.98
$2.08
$2.08
$2.15
$2.15
www.sidist.com
53
SCH EASYCUT II CUTTING SYSTEM
High Quality, Effective and Effici
t
The ProCut Section The greatest damage to knife sections and guards is caused by bent sections. With
ProCut sections, this is eliminated because the entire knife section is heat-treated, not just the cutting
edge as with conventional made sections. Therefore the section does not bend. This considerably
lengthens the life of the knife and reduces damage to the guards. All ProCut sections are secured
with special serrated bolts. The shoulder of the bolt wedges itself in the section and the knifeback.
Self-locking nuts ensure a secure and durable splice. The cutouts in the center of the section
help clean out residue buildup and also reduce the weight of the knife. The sections are not
chrome plated. They are zinc plated and have a self-sharpening effect. Chromed sections have a surface that is much harder than
the guards and wear the guards faster and do not stay sharp as long. Also, chrome plating is a very hazardous process and an
environmental concern.
The Sectional Knife All SCH cutter bars are manufactured as sectional knives. Now you can
transport a sickle bar of any length in a car, pickup or ship it by overnight carrier. The spliced
knife assemblies can be packaged in easy to handle nine foot or less lengths to virtually
eliminate delays in delivery, damage in transport or injury in handling. Dealers can make up
any length of knife from a minimal amount of segments. The special knife joint allows the
sectional knife to perform in the same way as a one-piece knife and is as strong or stronger
than the original knifeback.
fl tter +
optimized cutting edge
The Double Guard The guard is made out of high quality spring steel with
wider ridge
an extremely hard and wear resistant surface. Because the bottom and top
of the guard are bolted to the cutterbar, the guards hardly ever bend and
never have the top lip break off, a common problem of standard guards.
This extraordinary high stability has made the use of croplifters much more
reliable, even under extreme working conditions. Beveled guard cutting
edges hold the crop more fi mly, and do not pull it into the cutting gap;
this considerably improves the discharge of the cut crop. The cutting forces
square hole
blunt guard causes
and therefore the power expended is reduced substantially. The depth
less spearing of trash
of hardening on the cutting edge of the guard is increased by about 30%
because of the beveled edge. As a result, the guards last longer. The SCH EasyCut II guard gets more crop through the cutting
system. The cutting edge was lengthened by 7% and the cutaway was enlarged for better fl w. In addition, the blunt guard
eliminates spearing of residue, especially in no-till conditions.
The Cutting System The combination of the SCH EasyCut II guard and cutterbar knife create a cutting system which can be used
for cutting almost everything in the world of forestry and agriculture. Even onions or
hedges present no problem to the SCH EasyCut II system. The design of the EasyCut
II guard also eliminates hold down clamps, shims and all of the adjusting that goes
with them. Unlike other cutting systems, there’s no upward pressure on the knife. With
the section alternately cutting against the top and bottom of the guards, the cutting
edges stay close together. Because the knife remains balanced, you get top cutting
performance from start to finish. nd with our system always in balance, it keeps cutting
under more severe conditions, it’s easier to drive, and we have less breakage.
800.368.7773
SCH EasyCut II cutting systems can be retrofit ed on almost all types of combine
harvesters, swathers, mower conditioners and sickle bar mowers.
SCH EASYCUT II CUTTING SYSTEM
SCH WEAR PLATE SYSTEM
A standard SCH EasyCut conversion kit includes wear plates that
are hardened for longer life. The wear plate supports the knife
back from behind ensuring a linear knife movement. In addition,
the back edge of the knife section overlaps the knife back and
rides on top of the wear plate keeping the cutting system in balance. With these features it creates a tight fit in the double gua d
and eliminates the need for hold downs and the adjusting that
goes with them.
The SCH wear plate system is a big improvement over the standard cutting system and provides superior performance even in
the most difficult cutting onditions. The SCH wear plate system
is an economical option and is recommended when cutting high
moisture crops such as alfalfa or when harvesting in the dirt and
mud such as in edible beans.
SCH Wear Plate System:
• Linear knife movement
• Balanced cutting system
• No hold downs or adjustments
• Economically priced
Wear plates come in
different thicknesses
based upon the make
and model of the machine that the SCH EasyCut kit is being installed on. In addition,
there are different lengths to match the guards they are used with and to work around
bolts or other obstacles on the header’s backbone. The wear plates can be replaced
later with the SCH roller guide system but a new knife assembly is highly recommended
at that time.
SCH ROLLER GUIDE SYSTEM
Replaces the standard wear plates on machines equipped with the SCH EasyCut II cutting
system. Typically, a wear plate supports the knife. With today’s wider platforms and demand
for better cutting performance this leads to more wear on the knifeback and wear plates. The
SCH Bridge Rollers reduces the friction on the knifeback and allows the knife to run more
smoothly for superior cutting performance.
Top Bridge Roller
The Bridge Rollers are made with a hardened roller, sealed bearings and a cap to keep the dirt
out. With reduced knife resistance there is less load on the wobble box. Replace existing wear
plates on current SCH cutting systems or a new conversion kit can be ordered with Bridge
Rollers. When replacing worn wear plates a new knifeback is required to maintain proper
tolerances.
Please refer to next page for kit prices.
SCH Roller Guide System:
• Less knifeback wear
• Less friction
• Less knifeback breakage
• Easier knife installation
• Less power required to drive the knife
• Less platform vibration
Bottom Bridge Roller
www.sidist.com
55
SCH EASYCUT II KITS
For Most Combines, Windrowers, Mower Conditioners & Mowers
Kit price includes all parts to convert to the SCH EasyCut II SYSTEM, including
one pre-assembled knife with knifehead, (less bearing) all guards, and hardware,
plus ten extra replacement sections with hardware and two guards. Please specify
coarse (7 serrations per inch) or fine (10 se rations per inch) knife sections. Coarse is
recommended for soybeans and alfalfa; fine is ecommended for wheat and grasses.
Also includes 10mm socket and 10mm wrench for section bolts.
Note: The ideal cutter bar speed is 540 RPM for optimum cutting performance.
SCH EasyCut Kit Prices
Width
7
8
9
10
11
12
13
14
15
16
16.5
17
17.5
18
18.5
SCH Kit w/
SCH Kit w/
SCH Roller
SCH Kit w/
SCH Kit w/
SCH Roller
Width
Wear Plates
Rollers
Guide Kit*
Wear Plates
Rollers
Guide Kit*
$686.00
$748.00
$92.00
19
$1,354.00
$1,514.00
$233.00
$735.00
$803.00
$95.00
20
$1,403.00
$1,574.00
$233.00
$784.00
$864.00
$110.00
21
$1,446.00
$1,623.00
$251.00
$832.00
$920.00
$129.00
22
$1,494.00
$1,685.00
$269.00
$882.00
$975.00
$129.00
22.5
$1,538.00
$1,734.00
$269.00
$936.00
$1,041.00
$148.00
24
$1,587.00
$1,795.00
$283.00
$986.00
$1,097.00
$159.00
25
$1,630.00
$1,844.00
$300.00
$1,049.00
$1,170.00
$171.00
27
$1,716.00
$1,955.00
$318.00
$1,116.00
$1,244.00
$184.00
30
$1,832.00
$2,089.00
$362.00
$1,170.00
$1,305.00
$196.00
35
$2,028.00
$2,329.00
$422.00
$1,201.00
$1,342.00
$196.00
36
$2,077.00
$2,383.00
$435.00
$1,231.00
$1,378.00
$203.00
39
$2,252.00
$2,635.00
$473.00
$1,263.00
$1,410.00
$208.00
40
$2,310.00
$2,690.00
$485.00
$1,293.00
$1,446.00
$208.00
42
$2,406.00
$2,802.00
$506.00
$1,323.00
$1,483.00
$220.00
45
$2,527.00
$2,827.00
$529.00
*Installing a roller guide kit on an existing SCH EasyCut cutting system requires a new knifeback.
All double drive kits
Add
$232.00
All Hiniker bars
Add
$141.00
All Massey Ferguson/Claas combine models
Add
$141.00
All Massey Ferguson 8450 & 8460 models
Add
$141.00
White combines with wobble box & Hart Carter flo ting cutter bar
Deduct
$78.00
Massey Ferguson combines with wobble box & Hart Carter flo ting cutter bar
Deduct
$78.00
Pitman arm style drives, Love and Hart Carter (combines only)
Deduct
$78.00
$82.62
SCH EasyCut Sickle Bar Mower Kit Prices
Width
SCH Kit with Wear Plates
SCH Kit with Rollers
5
$313.00
$360.00
6
$387.00
$445.00
7
$447.00
$509.00
8
$509.00
$579.00
9
$569.00
$651.00
10
$631.00
$724.00
Kit price includes pre-assembled knife, without knifehead, all guards and hardware. Must re-use original equipment manufacturer (OEM) knifehead. No extra replacement parts are included. Please specify coarse (7 serrations
per inch) or fine (10 se rations per inch) knife sections. Coarse is recommended for soybeans and alfalfa; fine is
recommended for wheat and grasses.
800.368.7773
• EasyCut II guard gets more
crop through the cutting
system
• SCH knife system never
needs adjustment
• SCH guards bolt to top and
bottom of platform
• SCH guards are fully heat
treated
Price Adjustments to SCH EasyCut Kits
SCP083690: Optional 540 RPM, 11-1/2” backshaft pulley for Case-IH oil bath header.
• EasyCut II blunt guard
eliminates spearing of
residue
• SCH guards have two
beveled cutting edges
• SCH sections are fully heat
treated
• SCH sections will not bend
• Optional SCH rollers
improve performance
• Optional SCH rollers reduce
friction & vibration
SCH EASYCUT II KITS
The SCH EasyCut II Kits pages are a list of the most common machines that can be converted to the SCH EasyCut
II cutter bar system. This may also be helpful in determining which parts to order for certain machines. If your
machine is not listed, this does not mean that we do not fit th t machine. Please call for assistance.
Mfg.
AGCO
AGCO
AGCO
AGCO
AGCO
AGCO
AGCO
AGCO
AGCO
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Type
Model Description
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Rigid
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Rigid
Platform, Rigid
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
9250
300 Series, Early Style
300, 500, 800, 8000, Series, 3/4” knifehead
300, 500, 800, 8000 Series, 7/8” knifehead
7200, 8200
Hart Carter, Pitman Drive (1pc head)
Hart Carter, Pitman Drive (2pc head)
Hart Carter, Series 2
300, 700 Series, Rigid
#9, 7/16” BB
#9, 1/2” BB
#31
1100, 100, 7/16” BB
1100, 100, 1/2” BB
1200
1300
990
1190
1490, 1590
8330
SC414
2042, 2052, 2062 Flex
2142, 2152, 2162 Rigid
4000
503
810 (4-1/2” COFS)
810 (5” COFS)
810 Hiniker
810 Pitman Drive
820
1020
2020, early style
2020, S/N all “HAJ” & up to CBJ021301
2020, S/N CBJ021301 and after
3020
403 Hiniker
1010
201
230
275
375
721
725
1275
5000, 7/16” BB
5000, 1/2” BB
6000
8220
8340
Lefthand
Knifehead
OEM
SCP011195
SCP011222
SCP013997
OEM
OEM
OEM
SCP11252
SCP011195
OEM
OEM
OEM
OEM
OEM
OEM
OEM
SCP011259
SCP011185
SCP011186
SCP015474
SCP015474
SCP081373
SCP081379
SCP011185
OEM
SCP011252
SCP011227
SCP011227
OEM
SCP011226
SCP014266
SCP083792
SCP011213
SCP083815
SCP002401
OEM
SCP014266
OEM
SCP011185
OEM
OEM
OEM
OEM
SCP011229
SCP011185
SCP011185
SCP015428
SCP015474
SCP015474
Guards
Wear Plates or Spacers
12mm 14mm 17mm 4mm 5mm 6mm
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
OEM
SCP081380
SCP083793
SCP011214
SCP083816
www.sidist.com
57
SCH EASYCUT II KITS
Mfg.
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Caterpillar
Caterpillar
Caterpillar
Claas
Ford
Ford
Ford
Ford
Frontier
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Gehl
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Type
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Platform, Flex
Platform, Flex
Platform, Flex
Windrower
Mower
Mower
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Windrower
Windrower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
800.368.7773
Model Description
8360, 7/16” BB
8370, 8830, 3/8” BB
8370, 8830, 7/16” BB
8380
8820
8840, 8870
HDX162
Caterpillar, 3/8” BB
S450
501
505
515
642
1477
1070
1090
1216 Hydra Swing
2130
2160, 1/4” BB
2160, 7/16” BB
2170
2270
2650
2850
HK108
2230
2240
1010
1070, 1071, 3/8” BB
1070, 1071, 1/2” BB
1085, 1090, 1091, 1095
1110
1120
1150
1160, 8200, 1/4” BB
1160, 8200, 3/8” BB
1160, 8200, 7/16” BB
1170
1260, 7/16” BB
1265 Hydra Swing
1275
1660, 1/4” BB
PT 10
320
420
500, 1/2” BB
520, 7/16” BB
600
1014 Hydra Swing
2262, 1/2” BB
5200
6400, 6600, 5/16” BB
6400, 6600, 3/8” BB
Lefthand
Knifehead
SCP015474
SCP015474
SCP015474
SCP083616
SCP015474
SCP083616
SCP083614
SCP016326
SCP016326
SCP016326
SCP011125
OEM
OEM
OEM
OEM
OEM
SCP083618
SCP083618
SCP013667
SCP014534
SCP014534
SCP014534
SCP011280
SCP011280
SCP011229
SCP011229
OEM
SCP011229
SCP011280
SCP011258
SCP014534
SCP014534
SCP014534
SCP014534
SCP015474
SCP014534
SCP015474
SCP015474
SCP015474
SCP083616
SCP011229
SCP011229
SCP083616
SCP083616
SCP011258
SCP011229
SCP011229
SCP014534
SCP014534
SCP011258
SCP011229
SCP014534
SCP081363
SCP011229
SCP011229
Guards
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
SCP083617
SCP015475
SCP083617
SCP083615
SCP083617
SCP083617
SCP014535
SCH EASYCUT II KITS
Mfg.
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Hesston
Honey Bee
Honey Bee
Honey Bee
Honey Bee
Honey Bee
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
Type
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Platform, Draper
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Flex
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Auger
Platform, Auger
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Rigid
Model Description
6400, 6600, 7/16” BB
6450, 6465
6455
6550
6600, 6610, 3/8” BB
6600, 7/16” BB
6655, 6665
8100
8400, 3/8” BB
8400, 7/16” BB
8450, 3/8” BB
8450, 8840, 8870, 7/16” BB
9300
Draper
Draper, 8mm wear plates
3/16” BB, 8mm wear plates
1/4” BB
Series 3
#5, 3/8” BB
#5, 7/16” BB
#8, #38, #39
#8W
#9
#10
#11
#37
50 (Bushing Knifehead)
250, 350, 450 (Bearing Knifehead)
250, 350, 450 (Bushing Knifehead)
3700
485 (Ball Joint Knifehead)
710
720 (Ball Joint Knifehead)
720, 820, 7/16” BB
720, 820, 1/2” BB
820, 1/2” BB (Ball Joint Knifehead)
1207, 1209, 1219 (Ball Joint Knifehead)
1207, 1209, 1219 (Bearing Knifehead)
1207, 1209, 1219 (Bushing Knifehead)
1380, 1424 (K10)
1380, 1424 (K42)
1600 (Bearing Knifehead)
78
160
130, 3/8” BB
130, 7/16” BB
220, 230 (Ball Joint Knifehead)
230, 240 (Needle Bearing)
930, 936
200 Series
600 Series HydraFlex
600 Series HydraFlex Draper
900 Series
Hart Carter, Pitman Drive
55
Lefthand
Knifehead
SCP011229
SCP014534
SCP014534
SCP014534
SCP011229
SCP011229
SCP014534
SCP015474
SCP083616
SCP083616
SCP083616
SCP083616
SCP013667
SCP014226
SCP014226
SCP014226
SCP014226
OEM
OEM
OEM
OEM
OEM
OEM
OEM
OEM
OEM
SCP083662
SCP083663
SCP083662
SCP083663
SCP011220
SCP011220
SCP011220
SCP015427
SCP015427
SCP011220
SCP011220
SCP015427
SCP011196
SCP011196
SCP015427
SCP015427
SCP011220
SCP015427
SCP011196
SCP011196
SCP011220
SCP015427
SCP081352
SCP011207
SCP015421
SCP103187
SCP011207
OEM
SCP011207
Guards
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
*
x
*
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
SCP014535
SCP014535
SCP014535
SCP014535
SCP015475
SCP083617
SCP083617
SCP083617
SCP013668
SCP014227
SCP014227
SCP081378
SCP103188
www.sidist.com
59
SCH EASYCUT II KITS
Mfg.
Type
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
John Deere
Kosch
Lexion
Lexion
Love
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
Massey Ferguson
M/F-Claas
M/F-Claas
M/F-White
M/F-White
M/F-White
M/F-White
M/F-White
M/F-Claas
MacDon
MacDon
MacDon
MacDon
Platform, Rigid
Platform, Rigid
Platform, Rigid
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Mower
Platform, Flex
Platform, Flex
Platform, Flex
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Platform, Auger
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Rigid
Mower Cond.
Platform, Auger
Platform, Draper
Platform, Draper
Model Description
55, Hart Carter, Pitman Drive
200 Series
900 Series
300 (Bushing Knifehead)
300, 1380,1424 (Bearing Knifehead)
580, 1/4” BB
580, 5/16” BB
800, 2250, 2270, 3/8” BB
800, 7/16” BB
800, 1/2” BB
830
880
890
2250
2270
2280
2320, 2420
2360
2420, 1/2” BB
4840
F30, F530
F535, F540; 8mm plates
Love Bar
#41
#42
410
81
725
925
1880
220
655, 675, 775, 785
885
9250
1859, 9100 Series; Hart Carter
7200, 8200
9224 Rotary
9850 (AGCO Manufactured)
35
200
775
785
3850
36, 44
8450, 8460
8560, 9520, 1/4” BB
8560, 9520, 3/8” BB
8920
9300
9330
8460
4000
920
942
972
800.368.7773
Lefthand
Knifehead
OEM
SCP011207
SCP011207
SCP011196
SCP015427
OEM
OEM
SCP011220
SCP011220
SCP011220
SCP011220
SCP011220
SCP015427
SCP011220
SCP011220
SCP011196
SCP015427
SCP015428
SCP015427
OEM
SCP016326
SCP002413
OEM
OEM
OEM
OEM
OEM
SCP011263
SCP011263
OEM
OEM
SCP011188
SCP015428
OEM
OEM
OEM
SCP011255
SCP013997
OEM
OEM
SCP011220
SCP011188
SCP011222
OEM
SCP011125
SCP011255
SCP011255
SCP011255
SCP011255
SCP011255
SCP011125
SCP083669
SCP015428
SCP015428
SCP013667
Guards
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
SCP011197
SCP081378
SCP002412
OEM
SCP081351
SCP081351
SCP013668
SCH EASYCUT II KITS
Mfg.
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
MacDon
Mccormick
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
Type
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Draper
Platform, Flex
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Draper
Platform, Draper
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Rigid
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Model Description
974 Flex
FD70 Flex
FD75 Flex
D60 Rigid
973
910
920
960
3000
5000, 5020
5010
7000
Mower, 7/16” BB
405
450, 455, 1/4” BB
450, 455, 3/8” BB
450, 455, 7/16” BB
451, 456, 1/4” BB
451, 456, 3/8” BB
451, 456, 7/16” BB
451, 456, 1/2” BB
467
461, 469
472, 477, 478
474, 3/8” BB
488, 479
489, 3/8” BB
489, 7/16” BB
490
492, 3/8” BB
492, 7/16” BB
495, 1495
880
1496
73C
74C, S/N all HAJ & up to PNL018301
74C, S/N PNL018301 and after
740CF
84C Flex
88C Flex, 1/4” BB
94C, 8mm Plates
972
973
9750 Rotary
971
114
116, 1116
499, 1469, 1499
905
910, 3/8” BB
910, 7/16” BB
912
1100
1112
1114
Lefthand
Knifehead
SCP081373
SCP081379
SCP081379
SCP081379
SCP015428
SCP015428
SCP015428
SCP015428
OEM
SCP013667
SCP013667
SCP015428
OEM
OEM
OEM
OEM
OEM
OEM
OEM
OEM
OEM
SCP011219
SCP011219
SCP011192
SCP011191
SCP011192
SCP011191
SCP011191
SCP011219
SCP011191
SCP011191
SCP011224
OEM
OEM
SCP011213
SCP011213
SCP083815
SCP002401
SCP081373
SCP014226
SCP014226
SCP011213
SCP011213
SCP011255
SCP011213
SCP083678
SCP011276
OEM
OEM
SCP011276
SCP011276
SCP011276
SCP011276
SCP011276
SCP011276
Guards
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
SCP081380
SCP081380
SCP081380
SCP081351
OEM
SCP011214
SCP011214
SCP083816
SCO014227
SCP011214
SCP083679
SCP011277
OEM
SCP011277
SCP011277
SCP011277
SCP011277
www.sidist.com
61
SCH EASYCUT II KITS
Mfg.
New Holland
New Holland
New Holland
New Holland
New Holland
New Holland
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
New Idea
Oliver
Oliver
Oliver
Owatonna
Owatonna
Owatonna
Owatonna
Owatonna
Owatonna
Owatonna
Renn
Rowse
Rowse
Versatile
Versatile
Versatile
Versatile
Versatile
Versatile
Versatile
Versatile
Versatile
Vicon
White
White
Type
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Mower
Mower
Mower
Mower
Mower
Mower
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Mower Cond.
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Platform, Flex
Mower
Platform, Flex
Platform, Flex
Mower
Mower Cond.
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Mower
Mower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Windrower
Platform, Flex
Windrower
Model Description
1118
1465, 3/8” BB
1475, 3/8” BB
1475, 2450, 2550, 2300
2216
2326
#40
251, 254
252
522, 3/8” BB
522, 7/16” BB
522, 1/2” BB
290
299
509
5107
5109
5112
5114
711
713, 813 Uni Harvester
715 Uni Harvester
716S
815
82
525
7600
20, Pitman Drive
200
235
260, 270, 280
265, 275, 285
280
280, 7/8”-18 Threaded Knifehead
2000
3/8” BB
7/16” BB
#10
400, 3” C.O.F.S.
400, 3/1/2” C.O.F.S.
2800
4018
4022, 4750
4025
4030
4400
722
Kwik Cut
6200
Lefthand
Knifehead
SCP011276
SCP011191
SCP083614
SCP083614
SCP083614
SCP083614
OEM
OEM
OEM
OEM
OEM
OEM
OEM
OEM
SCP011186
OEM
OEM
SCP011186
SCP011186
SCP011282
OEM
OEM
SCP011282
SCP011282
OEM
OEM
OEM
OEM
SCP011280
SCP011280
SCP011280
SCP011280
SCP015428
SCP011281
SCP011220
OEM
OEM
SCP011193
SCP011217
SCP011193
OEM
OEM
OEM
OEM
SCP083677
SCP011217
SCP011188
OEM
SCP011188
Guards
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Righthand
Knifehead
SCP011277
SCP083615
SCP083615
SCP083615
OEM
SCP083680
These SCH EasyCut II Kits pages are a list of the most common machines that can be converted to the SCH EasyCut
II cutter bar system. This may also be helpful in determining which parts to order for certain machines. If your
machine is not listed, this does not mean that we do not fit th t machine. Please call for assistance.
800.368.7773
SCH EASYCUT II KNIFE ASSEMBLIES
Coarse Section
7 Serrations/Inch
Description
Section, SCH, Coarse, Box of 25 (standard on all SCH kits)
Section, SCH, Coarse, 10-Pack (includes 10 sections & hardware)
Price
$39.92
$21.61
SCP110961
SCP080504
Section, SCH, Fine, Box of 25 (wheat or grass only applications)
Section, SCH, Fine, 10-Pack (includes 10 sections & hardware)
$39.92
$21.61
SCP080503
Hardware, SCH Bolt & Nut 50-Pack (hardware for 25 SCH sections)
$14.31
SCP013935
Half Section, SCH, Single
Coarse sections (7 serrations per inch) are recommended for soybeans and alfalfa.
Fine sections (10 serrations per inch) are recommended for wheat and grasses.
Product ID
SCB081602
SCB081603
SCB081604
SCB081605
SCB081606
SCB081607
SCB081608
SCB081609
SCB081610
SCB081611
Fine Section
10 Serrations/Inch
Entire knife section is heat
treated, not just the cutting
edge, as with most sections.
Therefore, the Schumacher
section will not bend.
SCH Sections
Product ID
SCP110978
SCP080502
Product ID
SCP012022
SCP012031
SCP012023
SCP012032
SCP012024
SCP012025
SCP012026
SCP012027
SCP012030
SCP012028
SCH Knife Assembly Pieces
Description
Length Where Used
Knife Assembly, #1 Bar
102.25” Left hand end, 32 sections + 1/2 section, original
Knife Assembly, #1R Bar 99.25” Left hand end, 31 sections + 1/2 section, replacement
100.25” Left hand end, 32 sections, original
Knife Assembly, #2R Bar 97.25” Left hand end, 31 sections, replacement
89.75” Middle piece, 27 sections
106.25” Right hand end, 28 sections
Where used is in reference to left hand single-drive platforms.
SCH Knifeback
Description
Length Where Used
Knifeback, #1 Bar
102.25” Left hand end, drilled for 1/2 section, original
Knifeback, #1R Bar
99.25” Left hand end, drilled for 1/2 section, replacement
Knifeback, #2 Bar
100.25” Left hand end, drilled for full section, original
Knifeback, #2R Bar
97.25” Left hand end, drilled for full section, replacement
Knifeback, #3 Bar
89.75” Middle piece
Knifeback, #4 Bar
106.25” Right hand end
Knifeback, #5 Bar
Knifeback, #6 Bar
Knifeback, #7 Bar
Knifeback, #8 Bar
Where used is in reference to left hand single-drive platforms.
SCH Knife Assemblies
Starting With A HALF Section
Knife
Number Original Knife Replacement
Assembly
of
Assembly
Knife Assembly
Length
Sections Product ID (1) Product ID (2)
(1)
•
•
•
•
•
(2)
7’
8’
9’
10’
11’
12’
13’
15’
16’
17’
18’
20’
22’
24’
25’
27’
30’
35’
36’
1/2 + 30
1/2 + 34
1/2 + 38
1/2 + 42
1/2 + 46
1/2 + 50
1/2 + 54
1/2 + 62
1/2 + 66
1/2 + 70
1/2 + 74
1/2 + 82
1/2 + 90
1/2 + 98
1/2 + 102
1/2 + 110
1/2 + 122
1/2 + 142
1/2 + 146
SCB210300
SCB210340
SCB210380
SCB210420
SCB210460
SCB210500
SCB210540
SCB210620
SCB210660
SCB210700
SCB210740
SCB210820
SCB210900
SCB210980
SCB211020
SCB211100
SCB211220
SCB211420
SCB211460
$2.22
SCB210301
SCB210341
SCB210381
SCB210421
SCB210461
SCB210501
SCB210541
SCB210621
SCB210661
SCB210701
SCB210741
SCB210821
SCB210901
SCB210981
SCB211021
SCB211101
SCB211221
SCB211421
SCB211461
Price
$132.35
$128.22
$132.35
$128.22
$111.68
$115.81
$90.99
$57.91
$33.08
$16.53
Price
$49.37
$48.48
$49.37
$48.48
$46.47
$52.27
$40.65
$34.86
$16.82
$11.60
SCH Knife Assemblies
Starting With A FULL Section
Price
$123.95
$140.47
$157.00
$173.53
$190.06
$206.58
$223.10
$256.15
$272.69
$289.21
$305.73
$338.78
$371.84
$404.89
$421.41
$454.47
$504.04
$586.67
$603.20
Knife Number Original Knife Replacement
Assembly
of
Assembly
Knife Assembly
Length Sections Product ID (3) Product ID (4)
7’
8’
9’
10’
11’
12’
13’
15’
16’
17’
18’
20’
22’
24’
25’
27’
30’
35’
36’
30
34
38
42
46
50
54
62
66
70
74
82
90
98
102
110
122
142
146
SCB220300
SCB220340
SCB220380
SCB220420
SCB220460
SCB220500
SCB220540
SCB220620
SCB220660
SCB220700
SCB220740
SCB220820
SCB220900
SCB220980
SCB221020
SCB221100
SCB221220
SCB221420
SCB221460
SCB220301
SCB220341
SCB220381
SCB220421
SCB220461
SCB220501
SCB220541
SCB220621
SCB220661
SCB220701
SCB220741
SCB220821
SCB220901
SCB220981
SCB221021
SCB221101
SCB221221
SCB221421
SCB221461
Price
$123.95
$140.47
$157.00
$173.53
$190.06
$206.58
$223.10
$256.15
$272.69
$289.21
$305.73
$338.78
$371.84
$404.89
$421.41
$454.47
$504.04
$586.67
$603.20
(3)
(1) & (3) Original knife assembly has the knife sections installed the same way as the original knife assembly.
(2) & (4) Replacement knife assembly has the knife sections installed the opposite way as the original knife assembly.
If unsure how the knife assembly starts, order the knife with a half section because the half section can be easily removed.
Some knife assemblies may need cut to length to match original knife.
Please specify coarse (7 serrations per inch) or fine (10 se rations per inch) knife sections.
www.sidist.com
Coarse is recommended for soybeans and alfalfa; fine is ecommended for wheat and grasses.
(4)
63
SCH EASYCUT II PARTS
SCH Knife Connector Kits & Knifeback
Price
SCP083607 Connector bar with 1 extra bolt & insert
$17.14
Connector bar with 3 extra sections, 1 extra bolt
SCP080000
$21.69
& insert
SCH knifeback (without sections); average cost
N/A
$6.04
per foot
SCH EasyCut II 2-Point Standard Guard
Price
SCP016538 12mm 2-point standard guard
$19.30
$19.30
$19.30
SCH EasyCut II 2-Point Open Top Guard
Knife Connector Kits
SCH Wear Plates
Price
SCP017011 Wear plate, 4mm, 2-hole, (brown)
$3.24
SCP017012 Wear plate, 5mm, 2-hole, (blue)
$3.89
SCP017013 Wear plate, 6mm, 2-hole, (black)
$4.52
$3.69
$4.19
$4.70
$4.07
$4.52
$5.03
SCP010753 Wear plate, 5mm, 4-hole, double sided, (blue)
$5.79
SCP010754 Wear plate, 6mm, 4-hole, double sided, (black)
$6.30
Note: Number stamped on top of wear plate indicates thickness in
millimeters. Color also indicates thickness. See above.
SCH Bridge Rollers
• Improved Positioning
• Improved Wear Resistance
• Simplified ounting
800.368.7773
SCP016518 14mm 2-point open top guard
$32.04
$32.04
Price
17mm 2-point head guard, for
SCP017573
$35.10
Case-IH 1020*
*For most other models an open top guard can be
used instead of a head guard.
SCH EasyCut II 3-Point Standard Guard
Price
$36.35
$36.35
$36.35
Guard Size
12mm
14mm
17mm
All SCH Guards Are Color Coded & Numbered
Paint Color
Gloss black
Burnt orange
Light gray
Number Identifi ation
Stamped with 5-digit product ID or a “2” on the bottom
SCH Spacer Plates
Price
$13.98
$13.98
Product ID
SCP114927
SCP016445
SCP016588
SCP016587
SCP016589
$32.04
SCH EasyCut II 2-Point Head Guard
Wear Plates
SCH bridge roller, bottom.
Introduced in 2007; bolts
SCP015768 on top of guard and edge
of roller rides on bottom
of the section
SCH bridge roller, top.
Introduced in 2010; bolts
SCP016330 on top of guard and edge
of roller rides on top of
section.
Price
SCP015810
SCP015811
SCP015813
SCP015814
SCP015816
SCP015817
SCP083789
SCP083790
SCH spacer plate, 4mm, 2-hole (used with bridge roller)
SCH Croplifters
$2.36
$3.50
$2.36
$3.50
$2.36
$3.50
$2.90
$5.09
Description
Price
SCH ASX-100 croplifter; guards that are 5.7 - 6.0” long; SCH EasyCut I only
$21.64
SCH ASK-100 croplifter; guards that are 5.7 - 6.0” long; SCH EasyCut I & II
$26.64
SCH ASK-121 croplifter; guards that are 5.75 - 6.125” long
$26.64
$26.64
$26.64
SCH AS-100/2 croplifter; JD 600 series rigid & draper, 900 series draper with 4” OEM long guards;
SCP010142
$26.64
H213405, H229539
SCH AS-100/5 croplifter; JD 200, 900 series auger platforms with OEM guards, H113571,
SCP013549
$26.64
H145791, H153719, H171031
SCP010658 SCH spool fastener, required to install croplifters
$1.60
Note: Croplifters for other guards not listed above may be available. Call with measurement from tip of guard point
to the center of the guard bolt hole for correct fi .
SCH EASYCUT II PARTS
Center Guard
Product ID
SCP010045
SCP010071
SCP016519
SCP016520
SCP016469
SCP013666
SCP013665
SCP013961
SCP016222
SCP016223
Overlap Strap
Knife
Hardware
SCH Double Drive Parts
Description
Bolt, countersunk, 6mm x 16mm
Bolt, 6mm x 25mm, for knifehead
12mm 2-point open top center guard
Overlap strap, 2 sections
Overlap strap, 3 sections
Nut, flang , 6mm
Section, countersunk, fin
Section, countersunk, coarse
SCH Knife Hardware
Product ID
Price
$0.22
$0.35
$32.04
$32.04
$32.04
$22.56
$23.84
$0.15
$2.87
$2.87
SCH Inserts
Product ID
Description
Price
SCP010937
Insert, for splice kit
$0.70
SCP010941
Insert, for knifehead
$0.64
Splice Kit
Knifehead
SCH Skid Plates
Description
Price
$0.29
SCP010931
Bolt, 6mm x 16mm, for section
SCP010067
Bolt, 6mm x 18mm, for knifehead & splice
$0.26
SCP083610
$0.30
SCP010071
$0.35
SCP010072
$0.38
SCP013961
Nut, flang , 6mm
$0.15
SCP083611
Screw, 1/4” x 1” fl t head, for H/C 2 piece head
$0.33
SCP083612
Nut, 1/4”-20 center lock, for H/C 2 piece head
$0.11
Product ID
Description
Price
Skid Plate, fits model ear
2006 and after, MacDon
973, 974, FD60, FD70, D60;
Case-IH 2052, 2062, 2152,
$12.75
2162;
Required when installing
SCH EasyCut on these
headers.
SCP082817
SCH Skid Plates
SCH Guard Hardware
16mm Nut
Machined Washer
SCH Miscellaneous Parts
Nut, 16mm for ball joint
SCP010050
knifeheads
Washer, for ball joint
SCP010660
knifeheads
Bottom strap for H/C
SCP083613
2-piece head
Price
$2.61
$1.91
$45.14
Product ID
HDW210118
HDW210117
HDW210119
HDW210120
HDW210122
HDW210121
HDW210124
HDW210159
HDW210184
HDW210183
Description
HHCS, 3/8”-16 x 1-1/4”
HHCS, 3/8”-16 x 1-1/2”
HHCS, 3/8”-16 x 1-3/4”
HHCS, 3/8”-16 x 2”
HHCS, 3/8”-16 x 2-1/4”
HHCS, 3/8”-16 x 2-1/2”
HHCS, 3/8”-16 x 3”
Nut, serrated flang , 3/8”-16
Washer, USS fl t, 3/8”
Washer, SAE fl t, 3/8”
Price
$0.17
$0.18
$0.20
$0.22
$0.26
$0.30
$0.32
$0.06
$0.03
$0.02
Product ID
HDW210221
HDW210222
HDW210223
HDW210225
HDW210224
HDW220002
HDW220015
HDW220016
HDW220027
HDW220003
Description
HHCS, 10-1.5mm x 40mm
Carriage bolt, 10-1.5mm x 40mm
Nut, flang , 10-1.5mm
Price
$0.20
$0.28
$0.36
$0.48
$0.60
$0.40
$0.45
$0.50
$0.60
$0.10
SCH Pro Flex Lifter
Schumacher pulse crop lifters combine simple design
with durability for your easy pulse crop harvest:
• Compact design and easy mounting
• Guarantees tight fit on all ypes of guards (long slot)
• Length and angle of lifter finger is fully adjustable o allow for optimal working conditions
• White color of lifter finger p ovides maximum visibility in all crop conditions
• High quality material ensures extended durability of the lifter finge
• Specially designed for down edible beans, lentils, peas and other short crops
With the specially designed slot, the PRO FLEX lifter can fit pe fectly on
most types of guards. That’s why the SCH pulse lifter guarantees a tight fi .
Product ID
SCP017646
SCP017937
SCP080178
SCP080179
SCP080181
Description
SCH Pro Flex Lifter, with spacer
Replacement Finger
Package of 25, hardware kit *
Price
52.23
8.90
19.50
16.00
23.25
* Hardware kit is required for installation. Determined by make and model of guard.
PRO FLEX lifter will fit chumacher guards as well as most forged guards
www.sidist.com
65
SCH EASYCUT II KNIFEHEADS
AGCO
Price
5100, 5200
SCP081363 AGCO,
draper, LH
Case-IH - Continued
Price
$146.82
AGCO, 300 series fl x,
late model, LH
400 series rigid, LH
800, 8000 series
SCP013997 500,
fl x; 7/8” tie rod style, LH $107.32
Note: Replaces OEM
knifeheads with adjustable register
late model, LH
400 series rigid, LH
800, 8000 series
SCP011222 500,
fl x; 3/4” tie rod style, LH $107.32
Note: Replaces OEM
knifeheads with adjustable register
SCP011195 early model bushing
$117.20
style, 300 & 700 rigid, LH
Hart Carter Series
SCP011252 AGCO,
2 flo ting cutter bar, LH $117.20
Hiniker flo ting
SCP011279 AGCO,
cutter bar, LH
$146.82
crank arm style,
SCP011266 AGCO,
rigid, LH
$117.20
Case-IH
Price
SCP002401 Case-IH, 3020, LH
$253.98
3020, double
SCP002896 Case-IH,
drive, RH
$253.98
$94.98
2162, fl x
SCP081380 Case-IH,
draper, double drive, RH
$94.98
$102.39
2152, rigid
SCP013668 Case-IH,
draper, double drive, RH $102.39
2062, fl x
SCP081373 Case-IH,
draper, LH
$94.98
2062, fl x
SCP081381 Case-IH,
draper, double drive, RH
$94.98
2020, S/N
SCP083815 Case-IH,
CBJ021301 and after, LH
$94.98
Case-IH, 2020, S/N
SCP083816 CBJ021301 and after,
double drive, RH
Case-IH, 2020, S/N
SCP011213 all “HAJ” & up to
CBJ021301, LH
Case-IH, 2020, S/N
“HAJ” & up to
SCP011214 all
CBJ021301, double
drive, RH
$94.98
$94.98
$94.98
2020, double
SCP083792 Case-IH,
drive early style, LH
$94.98
Case-IH, 2020, double
SCP083793 drive early style, double
drive, RH
$94.98
800.368.7773
$146.82
$117.20
Case-IH, 810, 5-1/4”
center of knifeSCP011227 from
head bearing to center
of first full se tion, LH
Case-IH, 810, 4-1/4”
$117.20
$117.20
230, 1190,
SCP011185 Case-IH,
4000, 5000, LH
$146.82
$117.20
SCP011186 Case-IH, 1490, 1590, LH
$146.82
Case-IH, 8220, 8330,
SCP015474 8340, 8360, 8370, 8820,
8830, SC414, LH
Case-IH, 8220, 8330,
8360, 8370, 8820,
SCP015475 8340,
8830, SC414, double
drive, RH
$94.98
$94.98
8380, 8840,
SCP083616 Case-IH,
8870, LH
$94.98
8380, 8840,
SCP083617 Case-IH,
8870, double drive, RH
$94.98
Caterpillar
2162, fl x
SCP081379 Case-IH,
draper, LH
Case-IH, 2152, rigid
SCP013667 draper, LH
SCP014266 Case-IH, 1010, 1020, LH
Price
SCP016326 Caterpillar, fl x head, LH $192.70
Claas
Claas, 8450, 8460, 20’
SCP016326 and more, bearing not
included, LH
Price
$192.70
bearing for
SCP015949 Claas,
SCP016326 knifehead
$139.75
Claas 642, 8450, 8460,
SCP011125 S450, 15’ and less, bearing not included, LH
$132.01
bearing for
SCP011127 Claas,
SCP011125 knifehead
$120.42
Hart Carter Series
SCP011252 Claas,
2 flo ting cutter bar, LH $117.20
Gehl
SCP083618 Gehl, 1070, 1090, LH
2230, 2650, 2850,
SCP011229 Gehl,
LH
Price
$94.98
$102.39
SCH Hardware Kits for Knifeheads
Price
SCP083601 Parts package, for knifeheads with top strap
$4.14
SCP083784 Parts package, for knifeheads without top strap
$4.14
Hesston
Price
9300, lap
SCP013668 Hesston,
double drive, RH
$102.39
5100, 5200
SCP081363 Hesston,
draper, LH
$146.82
SCP014534
SCP014535
SCP083616
SCP083617
SCP011229
Hesston, 500, 520, 1070,
1071, 1085, 1090, 1091,
1095, 1110, 1150, 6450,
$94.98
6455, 6465, 6550, 6655,
6665, LH
Hesston, 1014+2, 6450,
6455, 6550, 6655, 6665,
$94.98
double drive, RH
Hesston, 1170, 1275,
1160, 8400, 8450, 8840,
$94.98
8870 LH
Hesston, 1170, 1275,
8400, 8450, 8840, 8870,
$94.98
double drive, RH
Hesston, 320, 420, 1014,
1260, 1265, 6400, 6600, $102.39
6610, LH
600, 1010, PTSCP011258 Hesston,
7, PT-10, LH
SCP015428 John Deere 2360, LH
$94.98
$94.98
1120, 1160,
SCP015474 Hesston,
8100, 8200, 8400, LH
$94.98
Hesston, 1120, 1160,
SCP015475 8100, 8200, 8400,
double drive, RH
$94.98
Honey Bee
John Deere
Price
John Deere, 130, 160,
230, 300, 710, 720,
890, 895, 1207,
SCP015427 820,
$94.98
1209, 1219, 1380, 1424,
1600, 2280, 2320, 2420,
needle bearing style, LH
1600 double drives, $94.98
SCP081378 895,
needle bearing style,
double drive, RH
230, 485, 710, 800, 830,
SCP011220 880, 1207, 1209, 2250,
$146.82
2270, ball joint style (serial # -285000), LH
SCP083663 350, 450, 3700, bearing
$94.98
style, LH
SCP083662 350, 450, bushing style,
$94.98
LH
Price
Bee, model year
SCP014226 Honey
2002-current, LH
$146.82
Honey Bee, model year
SCP014227 2002-current, double
drive, RH
$146.82
Lexion
Price
SCP002413 Lexion, F535, F540, LH
$253.98
F535, F540,
SCP002412 Lexion,
double drive, RH
$253.98
SCP016326 Lexion, F30, F530, LH
$192.70
MacDon
Price
FD70, FD75,
SCP081379 MacDon,
A30-S, LH
$94.98
FD70, FD75,
SCP081380 MacDon,
double drive, RH
$94.98
$146.82
SCP081373 MacDon, 974, LH
$94.98
John Deere 600FD
SCP103188 Hydrafl x draper,
double drive, RH
$146.82
974, double
SCP081381 MacDon,
drive, RH
$94.98
Deere, 600 series
SCP015421 John
fl x, LH
$146.82
972, 5000,
SCP013667 MacDon,
5010, 5020, D60, LH
$102.39
Deere, 900 series
SCP081352 John
draper, LH
$146.82
972, D60,
SCP013668 MacDon,
double drive, RH
$102.39
Deere, 200 & 900
SCP011207 John
series fl x & rigid, LH
$146.82
John Deere, crank arm
SCP011121 style, rigid, bearing not
included, LH
$94.98
John Deere
SCP103187
John Deere 600FD
Hydrafl x draper, LH
Deere, bearing for
SCP011122 John
SCP011121 knifehead
Price
$151.23
1209, 1219, 1380,
SCP011196 1207,
1424, bushing style (se- $102.39
rial #285000-), LH
John Deere, 300 double
bushing style (se- $102.39
SCP011197 drives,
rial #285000-), double
drive, RH
MacDon, 910, 920 lap
SCP015428 double drive, 942, 960,
973, 7000, LH
MacDon, 920 lap double
SCP081351 drive, 942 double drive,
RH
$94.98
$94.98
$94.98
920, double
SCP081378 MacDon,
drive, RH
$94.98
$117.20
Price
$4.14
$4.14
www.sidist.com
67
New Holland
Massey-Ferguson
Price
7000, $107.32
SCP013997 Massey-Ferguson,
9850, LH
Massey-Ferguson, 8560,
SCP011255 8920, 9300, 9520, 9750, $132.01
Rotary, LH
20’ and more,
SCP016326 8460,
$192.70
bearing not included,
LH
Massey-Ferguson,
SCP015949 bearing for SCP016326
knifehead
$139.75
8460, S450, 15’
SCP011125 8450,
and less, bearing not
included, LH
$132.01
Massey-Ferguson,
SCP011127 bearing for SCP011125
knifehead
$120.42
Massey-Ferguson, Hart
Carter & Hiniker flo ting
cutter bar, knifehead
at 0-degree
SCP011211 bushing
$146.82
angle, LH
Note: For replacement
only. New kits will reuse
the OEM knifehead.
Massey-Ferguson, Hart
Carter & Hiniker flo ting
cutter bar, knifehead
at 5-degree
SCP011212 bushing
$146.82
angle, LH
Note: For replacement
only. New kits will reuse
the OEM knifehead.
725,
925, LH
$117.20
655,
675, 775, 785, LH
$86.34
885,
LH
$94.98
220
windrower, LH
$146.82
New Holland
Price
SCP002401 New Holland, 740CF, LH $253.98
Holland, 740CF,
SCP002896 New
double drive, RH
New Holland, 73C; 74C
all “HAJ” & up to
SCP011213 S/N
PNL018301; 970, 971,
972, 973, LH
New Holland, 73C; 74C
S/N all “HAJ” & up to
SCP011214 PNL018301; 970, 971,
972, 973, double drive,
RH
New Holland, 74C S/N
and after,
SCP083815 PNL018301
all S/N Y9ZL double
drives, LH
800.368.7773
$253.98
$94.98
$94.98
$94.98
New Holland, 74C S/N
and after,
SCP083816 PNL018301
all S/N Y9ZL
double drive, RH
Price
$94.98
Holland, 88C, 94C,
SCP014226 New
LH
$146.82
Holland, 88C, 94C,
SCP014227 New
double drive, RH
$146.82
Holland, 474, 489,
SCP011191 New
492, 1465, LH
$94.98
Holland, 472, 477,
SCP011192 New
478, 479, 488, LH
$94.98
Holland, 114 wind- $111.03
SCP083678 New
rower, LH
Holland, 114 windSCP083679 New
rower, double drive, RH $111.03
New Holland, 116, 910,
SCP011276 912, 1100, 1112, 1114,
1116, 1118, LH
New Holland, 116, 910,
SCP011277 912, 1112, 1114, 1116,
1118, double drive, RH
$86.34
$86.34
Holland, 461, 467,
SCP011219 New
469, 490, LH
$94.98
Holland, 495, 1495,
SCP011224 New
LH
$94.98
New Holland, 1475,
SCP083614 2216, 2300, 2326, 2450,
2550, H7150, LH
New Holland, 1475,
2300, 2326, 2450,
SCP083615 2216,
2550, H7150, double
drive, RH
$94.98
$94.98
Owatonna
Price
Owatonna, 200, 206,
235, 260, 265, 270,
SCP011280 217,
275, 285, 7/8-18 threads $102.39
per inch, LH
Owatonna, 260, 280,
SCP011281 7/8-14 threads per inch, $102.39
LH
Versatile
Price
SCP083677 Versatile, 4030, LH
$94.98
4030, double
SCP083680 Versatile,
drive, RH
$94.98
Versatile, 10, 400, 3-1/2”
Versatile, 400, 4400, 3”
$86.34
$86.34
Price
$4.14
$4.14
SCH PRO-DRIVE KNIFE DRIVE
Comparison of SCH Pro-Drive to conventional cutterbar knife drives
Almost all conventional cutterbar knife drives in combine harvesters have a knife stroke of between
3” and 3-1/3”. When a crop that is difficult o cut loads the cutting knife, the knife rarely travels the
full length of the stroke. A considerable amount of the stroke is lost in defle ting gear housings,
gear brackets, ball and socket joints and installed wobble boxes. Drives have been tested in which
the stroke has fallen to 2-1/2” under load. The knocking and shaking this produces in the cutterbar is
known to almost every expert in the fiel . It gives the impression that dull sections are being used.
The SCH Pro-Drive high performance cutterbar knife drive eliminates all these problems. Built using
planetary gears, these drives produce an absolutely linear knife movement when compared with
wobble boxes or other oscillating and pendulum drives. The gears are in exact alignment with
the knife. This means there is no need for reversing or oscillating levers, which causes the loss of
stroke in other drives. The full length of the stroke generated by the planetary gears is transmitted
to the knife. The SCH Pro-Drive high performance knife drives can be driven either horizontally or
vertically.
Advantages of SCH Pro-Drive to conventional cutterbar knife drives
The SCH Pro-Drive high performance knife drive in conjunction with the uniquely simple SCH
cutterbar system achieve cutting performances that had never been considered possible in the
past, particularly in the case of self-propelled harvesters. The Pro-Drive planetary gear system
is in rotation at all times. Therefore, there are no dead spots as in wobble or crank drives where
arms and levers have to come to a full stop twice per revolution to change direction. These
advantages mean that a change to a SCH Pro-Drive knife drive and cutterbar system will pay for
itself in just a short time.
The problem most knife
drives have, is the loss of
stroke length and force.
This is addressed with the
SCH ProDrive.
• Higher ground travel cutting speeds
• Improved material fl w with less reel work
• Low maintenance
• Minimal wear and easy service
• Less plugging with “reverse gear” not used as often
• Longer harvesting days, crops can be cut when there is dew on the ground
• Very easy knife change, remove two bolts for easy in-the-field change
• Grease lubricated, eliminates the possibility of oil loss due to seal failure
Changing knives with the SCH Pro-Drive
The engineers have devised a brilliant method
of attaching the knifehead to the drive that is a major advancement. Designed as a
trapezoidal claw, the connection is easy and accurate. No bolts to line up, no bearings to
adjust or shim, no fear that dirt might get into bearings, bushings, etc. Makes changing
knives even in the field a b eeze.
Overstroke in the SCH Pro-Drive. The special construction of the planetary drive results
in a precisely defined nife stroke. With a stroke of 85mm or 3-1/3” there is an overstroke of
4.4mm or 1/6” to either side.
www.sidist.com
69
SCH PRO-DRIVE KNIFE DRIVE
Product ID
SCP014869
SCP012457
SCP012466
SCP012472
Vertical Pro-Drive
Case-IH Flex Mounting Bracket
John Deere Flex Mounting Bracket
Pro-Drive Knifeheads
Description
Pulley, 6-bolt, 180mm
Hub, required if replacing keyed pulley with 6-bolt pulley
Product ID
SCP012573
SCP012563
SCP012564
Description
Adapter, for 25.4mm (1”) shaft
Adapter, for 31.7mm (1-1/4”) shaft
Adapter, for 32.0mm shaft
Product ID
SCP083748
SCP011329
SCP011339
SCP011340
SCP011341
Description
Knifehead, Massey-White 9750
Knifehead, Massey-Ferguson/Hart Carter
Knifehead, John Deere fl x and rigid
Knifehead, Case-IH fl x and rigid
Knifehead, AGCO fl x and rigid
Price
$146.82
$146.82
$146.82
$146.82
$146.82
Product ID
SCP011236
SCP081353
SCP081354
SCP083629
SCP081355
SCP081357
Description
Clamp, used to manufacture custom knifehead
Clamp, AGCO 300-800 series, 3/4”
Clamp, AGCO 300-800 series, 7/8”
Knifehead, Claas
Knifehead, Case-IH 3” system
Knifehead, John Deere fl x and rigid
Price
$45.14
$60.38
$60.38
$146.82
$146.82
$146.82
Product ID
SCP010099
SCP010258
SCP012543
SCP012766
SCP014739
Description
Bolt, 10mm x 35mm allen head
Bearing, for greaseable bearing block
Nylon ring, for Pro-Drive knifehead
Bearing block assembly, SCH Pro-Drive 85V, 85H, 130V, 130H; greaseable
Bearing block assembly, SCH Pro-Drive 85V, 85H, 130V, 130H; sealed bearing
Bearing block assembly, AGCO/MF 7200, 8200, 9250 (#71416424), JD Early 900D
(#DE19373), greaseable bearing
Bearing block assembly, AGCO/MF 7200, 8200, 9250 (#71416424), JD Early 900D
(#DE19373), sealed bearing
Bearing block assembly, JD 600F, 600R, 600D; JD Late 900D (#DE19294), greaseable
U-bracket, for John Deere fl x mount
U-bracket, for AGCO fl x mount
Mounting plate, used to manufacture custom bracket
Clevis, 16mm, for John Deere late 900 series
Clevis, 12mm, for John Deere early 900 series
Clevis, 1/2”, for John Deere 200 series
Price
$0.50
$95.29
$8.84
$151.23
$151.23
SCP014742
800.368.7773
SCH Pulleys for Vertical Pro-Drive
Product ID
SCP012775
SCP083744
SCP012780
SCP012782
SCP012785
SCP012788
SCP012802
SCP012579
SCP092601
Bearing Block Assembly
SCH Pro-Drive
Description
Price
SCH Pro-Drive 85V, vertical, 85mm (3.3”) stroke
$1,625.00
$1,825.00
SCH Pro-Drive 85H, horizontal, 85mm (3.3”) stroke
$1,625.00
SCH Pro-Drive 130H, horizontal, 130mm (5.1”) stroke
$1,625.00
Replaces John Deere #DE19785 on 620F, 622F, 625F, 630F and 635F fl x platforms &
SCP014714
$1,725.00
622R, 625R and 630R rigid platforms.
Note: Does not include pulley and knifehead bearing block assembly.
SCP014697 Replaces John Deere #DE19786 on 925D, 930D, 936D draper platforms.
$1,725.00
SCP014811 Replaces drive on AGCO & Massey Ferguson 7200, 8200.
$1,725.00
Warranty: SCH Pro-Drives have a 1 year warranty on parts and labor from date in service.
SCP014230
SCP082702
SCP082705
SCP083625
SCP083626
SCP083627
SCP083628
SCH Adapters for Horizontal Pro-Drive
SCH Knifeheads for Pro-Drive With SCH Cutter Bar
SCH Knifeheads for Pro-Drive With OEM Cutter Bar
SCH Pro-Drive Miscellaneous Parts
Price
$152.55
$152.55
$152.55
$152.55
$152.55
$152.55
$152.55
$45.26
Price
$68.01
$68.01
$68.01
$229.50
$229.50
$189.00
$125.00
$125.00
$68.01
$29.56
$29.56
$29.56
SCH PRO-DRIVE KITS
All SCH Pro-Drive Conversion Kits Include:
• 1-SCH Pro-Drive, vertical, 85mm (3.3”) stroke
• 1-mounting bracket for SCH Pro-Drive
• 1-drive pulley for SCH Pro-Drive
• 1-extra nylon ring for knifehead
• 1-knifehead
Warranty: SCH Pro-Drives have a 1 year
warranty on parts and labor from date in
service.
John Deere 200-900 Series Headers
With SCH SCH Cutter
With JD
JD Cutter
Description
Cutter Bar Bar Price
Cutter Bar Bar Price
Flex, 4420, 6620 & 7720 through 1985 with 1/2” clevis*
SCK100100
$2,150.00
SCK100110 $2,150.00
Flex, 9000 Series with 1/2” clevis*
Flex, 6620 & 7720 after 1985 with 1/2” clevis*
SCK100101
$2,150.00
SCK100111 $2,150.00
Flex, 8820 with 1/2” clevis*
Flex, 4420, 6620 & 7720 through 1985 with 12mm clevis*
SCK100102
$2,150.00
SCK100112 $2,150.00
Flex, 9000 Series with 12mm clevis*
Flex, 6620 & 7720 after 1985 with 12mm clevis*
SCK100103
$2,150.00
SCK100113 $2,150.00
Flex 8820 with 12mm clevis*
Flex, 4420, 6620 & 7720 through 1985 with 16mm clevis*
SCK100104
$2,150.00
SCK100114 $2,150.00
Flex, 9000 Series with 16mm clevis*
Flex, 6620 & 7720 after 1985 with 16mm clevis*
SCK100105
$2,150.00
SCK100115 $2,150.00
Flex, 8820 with 16mm clevis*
Rigid, 4420, 6620 & 7720 through 1985
SCK100106
$2,100.00
SCK100116 $2,100.00
Rigid, 9000 Series
Rigid, 6620 & 7720 after 1985
SCK100107
$2,100.00
SCK100117 $2,100.00
Rigid, 8820
*The clevis size refers to the size of the bolt used on the fl x knife drive horizontal stabilizer spring
Size of the Bolt
in the Clevis
Case-IH 1010, 1020 Series Headers
With SCH
SCH Cutter
With CIH
CIH Cutter
Description
Cutter Bar
Bar Price
Cutter Bar
Bar Price
SCK100130
$2,150.00 Flex, 1020, greaseable wobble box, S/N JJC0215000 and lower
SCK100140
$2,150.00
SCK100131
$2,150.00 Fex, 1020, oil bath wobble box, S/N JJC0215001 - JJC0323604
SCK100141
$2,150.00
SCK100132
$2,150.00 Flex 1020, oil bath wobble box, S/N JJC0323605 and up; CBJ023001 and up
SCK100142
$2,150.00
SCK100133
$2,100.00 Rigid, 1010
SCK100143
$2,100.00
Note: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will be
added to the above kit price and credited back if a runner is returned in useable condition.
AGCO 300-8000 Series Headers
With SCH
SCH Cutter
With AGCO
AGCO Cutter
Description
Cutter Bar
Bar Price
Cutter Bar
Bar Price
SCK100150
$2,150.00 Flex, 300-8000 Series
SCK100155
$2,100.00
Note: Please specify the tie rod bolt size (3/4” or 7/8”) with AGCO cutter bar.
Massey-White 9750 Series Headers
With SCH
SCH Cutter
With M/F
M/F Cutter
Description
Cutter Bar
Bar Price
Cutter Bar
Bar Price
SCK100160
$2,150.00 Flex, 9750 series
SCK100162
$2,100.00
Note: Knifehead for Massey-White cutting system is not available. A knifehead clamp is provided that must be welded to original knifehead strap.
JOHN DEERE STABILIZER KIT
Recommended for John Deere 25’ - 30’ Flex Heads to Reduce Vibration
John Deere Stabilizer Kit
Product ID
SCP082802
Description
Stabilizer kit, for John Deere 900 series fl x heads
Price
$210.00
Product ID
SCP082706
SCP082707
SCP082708
SCP082709
Description
Tie rod assembly
Bracket, anchor
Bracket, angle
“H” bracket
Price
$115.00
$17.00
$118.00
$25.00
Stabilizer Replacement Parts
www.sidist.com
71
RADURA KNIFE ASSEMBILES
Why spend big money on OEM replacement parts?
The Radura line offers ultra high quality German OEM replacement
parts for a fraction of the cost of those offered by the manufacturer.
Radura offers components, which significa tly support the overall
performance of harvesters. They are often subject to high wear and
must be replaced regularly. Providing high quality and sure fitting
spare parts, Radura ensures a simple application and great results
whether it is grain, soybeans, or grass crops.
Radura OEM Replacement Knife Assemblies
John Deere 600 Series Flex Draper Platform with 4” Knife Sections
RSP080080 Hardware kit for OEM knifehead, includes 10 bolts and nuts
Knife Assembly, John Deere 630FD, w/o knifehead, single drive,
RSP080086 7-SPI sections
Knife Assembly, John Deere 630FD, w/o knifehead, double drive, LH
RSP080727 knife, 7-SPI sections
Knife Assembly, John Deere 630FD, w/o knifehead, double drive, RH
RSP080094 Connector Kit, John Deere 600 series, 7-SPI sections
Knife Assembly, John Deere 630FD, w/o knifehead, single drive,
RSP080061 14-SPI sections
RSP080573 Knifehead, John Deere 900 series draper, replaces AH220050
RSP080080 Hardware kit for RSP080573 knifhead, includes 10 bolts and nuts
RSP080060 Knife Assembly, John Deere 925D, w/o knifehead, 14-SPI sections
RSP080076 Connector Kit, John Deere 900 series draper, 14-SPI sections
Price
$16.65
$581.17
$344.37
$313.88
$380.12
$342.05
$390.38
$358.42
$32.50
$581.17
$344.37
$313.88
$380.12
$342.05
$390.38
$358.42
$32.50
$95.75
$16.65
$467.75
$581.17
$685.75
$32.50
For double drive knife assemblies, select both a right hand (RH) and left hand (LH)
assembly.
Coarse (7-SPI) is recommended for soybeans and alfalfa; fine (14-SPI) is ecommended for
wheat and grasses.
800.368.7773
• UPS Shippable
• Hardware is included
• OEM quality parts
• Available with Coarse or Fine Sections
• Entire knife section is heat-treated,
not just the cutting edge as with
conventional made sections.
Therefore the section does not bend.
Radura OEM Replacement Sectional Knife Assemblies
John Deere 600 Series with 4” Knife Sections
Price
RSP002559 Knifehead, John Deere 600 series, replaces AH220051
$82.50
RSP080080 Hardware kit for RSP002559 knifhead, includes 10 bolts and nuts
$16.65
RSP080059 Knife Assembly, John Deere 620, w/o knifehead, 14-SPI sections
$368.55
$467.75
$581.17
$667.17
$32.50
$368.55
$467.75
$581.17
$667.17
$32.50
wheat and grasses.
John Deere 900 Series Draper with 4” Knife Sections
Product ID
RSP080573
RSP080080
RSP080060
RSP080061
RSP080609
RSP080076
Description
Knifehead, John Deere 900 series draper, replaces AH220050
Hardware kit for RSP080573 knifhead, includes 10 bolts and nuts
Knife Assembly, John Deere 925D, w/o knifehead, 14-SPI sections
Connector Kit, John Deere 900 series draper, 14-SPI sections
Price
$95.75
$16.65
$467.75
$581.17
$685.75
$32.50
Product ID
RSP051520
RSP080159
RSP080160
RSP080161
RSP080162
RSP080163
RSP080174
Description
Knifehead, Case-IH 1010 & 1020 series
Knife Assembly, Case-IH 1010 & 1020 series, 17.5’
Knife Assembly, Case-IH 1010 & 1020 series, 20’
Knife Assembly, Case-IH 1010 & 1020 series, 22.5’
Connect Kit, Case-IH 1010 & 1020 series, 9-SPI sections
Price
$93.18
$328.00
$359.47
$395.83
$400.63
$473.67
$22.50
Case-IH 1010 & 1020 Series
John Deere 200 & 900 Series with 3” Knife Sections
Price
Knifehead, John Deere 200 & 900 series, replaces AH121075,
RSP052094 KXE10217
$59.95
RSP080019 Knife Assembly, John Deere 218, 918, w/ knifehead, 11-SPI sections $293.80
RSP080040 Connector Kit, John Deere 200 & 900 series, 11-SPI sections
$22.50
RSP080057 Connector Kit, John Deere 200 & 900 series, 7-SPI sections
$22.50
wheat and grasses.
RADURA GUARDS/SECTIONS
AGCO
Case IH
Case IH
John Deere
John Deere
John Deere
John Deere
John Deere
RSP122500
RSP129901
RSP121501
RSP124002
RSP133981
RSP187011
RSP134051
RSP187030
Product ID OEM #
RSP122500
AGCO OEM Rplacment Guards
71341601,
71116504
71386962
Price
Product ID OEM Part Number Description
Price
Guard, 2-point, double hardened
AGCO early model non-flo ting, all
AGCO Series 3, 300, 400, 500, 700, 800, 7000, 8000,
8200, 9250
$8.75
SCP011003
71135135, 71348175
$34.95
SCP011001
71135135, 71348175
Case-IH OEM Replacement Guards
Product ID OEM #
RSP129901
RSP121501
Description
1307299C2 Guard, 2-point without trash bar, double hardened
334305A1 Case-IH 1010, 1020; 2010, 2020 SN #CBJ020001 & up
Guard, 2-point with trash bar, 4-1/4” long, double
86615982 hardened
700707147 Case-IH 2010, 2020 prior to SN #CBJ020000 & all SN
#HAJ
John Deere OEM Replacement Guards
Product ID OEM #
RSP124002
RSP134000
H113571,
H145791
H153719,
H171031
H25603,
H171032
H153855
RSP133981
H213398
H229537
RSP135071
H213507
H229538
RSP187021
RSP187011
H218702
H218701
RSP134051
H213405
H229539
RSP135081
H213508
H229540
RSP187030
H218703
RSP183441 118344
Price
$10.85
$10.90
Description
Price
Guard, 2-point, 3” cutting system, double hardened
John Deere 200, 900 series rigid & fl x headers
$8.45
Standard blunt point guard, long-short-long
John Deere, 600 series fl x & fl x draper
Standard blunt point guard, short-long-short
John Deere 600 series fl x & fl x draper
No-till blunt point guard, guard doesn’t have a cross
bar, long-short-long
John Deere 600 series fl x headers
No-till blunt point guard, guard doesn’t have a cross
bar, short-long-short
John Deere 600 series fl x headers
Long point guard, long-short-long
John Deere, 600 series rigid & draper; 900 series draper
Long point guard, short-long-short
John Deere, 600 series rigid & draper; 900 series draper
Guard, 3-point, 4” cutting system
Non-clog guard; guard doesn’t have a cross bar, longlong-long
Used in conditions where crop gets tangled
John Deere, 600 series rigid, fl x and draper; 900 series
draper
Description
Guard, 2-point, double hardened
MacDon 960, 962, 963, 972, 973, 974, D40, D50,
FD70
$15.20
Box of 25, AGCO coarse section, 7
serrations per inch
AGCO non-flo ting platforms, Series
3, 300, 400, 500, 700, 800, 7000, 8000,
8200, 9250 and Challenger.
Box of 25, AGCO fine se tion, 10
serrations per inch
AGCO non-flo ting platforms, Series
3, 300, 400, 500, 700, 800, 7000, 8000,
8200, 9250 and Challenger.
Case-IH OEM Replacement Sections
RSP080140
112074A1
RSP041830
102053, 158516
RSP042737
Guard, 3-point, 3” cutting system
John Deere 200, 900 series rigid & fl x headers
MacDonOem Replacement Guards
Product ID OEM #
AGCO OEM Replacement Sections
Description
John Deere OEM 3” Replacement Sections
RSP010992
RSP080017
H136807, H207929
$14.15
$14.15
RSP042737
Box of 25, John Deere 3” coarse section, 7 serrations per inch. John Deere
200, 900 series with 3” cutting system
Box of 25, John Deere 3” fine se tion,
11 serrations per inch. John Deere
200, 900 series with 3” cutting system
Hardware, pkg of 50; 5/8” long ribbed
bolts & locknuts
John Deere OEM 4” Replacement Sections
$11.80
$29.25
$11.55
RSP080010
H163131
$56.25
RSP080012
H163131
RSP080011
H153329
RSP080013
H153329
$12.80
RSP080079
Box of 25, John Deere 4” coarse
section, 7 serrations per inch, plated.
John Deere 600F, 600R, 600D, 600FD,
900D with 4” cutting system
Box of 25, John Deere 4” coarse section, 7 serrations per inch, unplated.
John Deere 600F, 600R, 600D, 600FD,
900D with 4” cutting system
14 serrations per inch, plated. John
Deere 600F, 600R, 600D, 600FD, 900D
with 4” cutting system
14 serrations per inch, unplated. John
Deere 600F, 600R, 600D, 600FD, 900D
with 4” cutting system
Hardware, pkg of 50; 6mm long bolts
& locknuts
MacDon OEM Replacement Sections
$11.45
$29.25
Price
$12.80
Price
Price
$11.80
$12.20
Price
Box of 25, Case-IH section, 9 serrations
per inch. Case-IH 820, 1010, 1020,
$29.25
2010, 2020
Box of 25, Case-IH coarse section,
7 serrations per inch. Case-IH 1042,
$31.50
1052, 2042, 2052, 2062, 2142, 2152,
2162
Hardware, pkg of 50; 5/8” long ribbed
$11.55
bolts & locknuts
H160251, H168316,
H207930
$34.95
$45.95
$56.25
$45.95
$18.95
Price
RSP041830
$31.50
102053, 158516
Box of 25, MacDon coarse section, 7
serrations per inch. MacDon 960, 962,
963, 972, 973, 974, D50, D60, D65,
FD70, FD75
New Holland OEM Replacement Sections
SCP011007
848091
SCP011005
848091
RSP041830
102053, 158516
Price
Box of 25, New Holland coarse section,
7 serrations per inch. New Holland
$34.95
970, 971, 972, 973
Box of 25, New Holland fne section, 10
serrations per inch. New Holland 970, $34.95
971, 972, 973
Box of 25, New Holland coarse section,
7 serrations per inch. New Holland
$31.50
84C, 86C
www.sidist.com
73
BOULE CRISTAL STROBE LIGHT
Unbreakable &
fl xible rotating
beacon
A High Quality, Unbreakable, Flexible & Rotating
Strobe Light for Agricultural Equipment
• Single voltage power supply
• Flexible rubber base
• Vibration proof and watertight
• Unbreakable polycarbonate dome
• Fast, clamp mounting
• Worm gear drive
• Metallized steel refle tor with
balance counterweight and
stepped device for manual rotation
• Radio interference fil er
Bracket B
LGT010000
Bracket FZ
Bracket R
SWIFT TAILLIGHTS
Portable Wireless
Remote Control Taillights!
• Farm Trailers & Hay Trailers
• RV’s & Campers
• Horse Trailers
• Construction Equipment
!
uct
Prod here!
W
NE
Anyw
ch
a
t
At
• Boat Trailers with Damaged Wiring
• Just-In-Case Emergency Lighting
• Utility Trailers
• Flashlight Mode Lighting
Product ID
Description
Price
TPL200000
Swift Taillights
$279.00
HCC SMART-TILL PARTS
We are now stocking replacement tines, bearings and other wear
items for the HCC Smart-Till residue management tool.
Product ID
HCC202925
HCC212500
HCC226334
HCC231250
HCC231251
HCC243748
HCC243749
HCC553001
HCC Smart-Till Replacement Parts
Description
Bolt for Tine
Lock Nut for Tine
Heavy Duty Spindle & Hub Assembly
Tine, Left Hand Carriage
Tine, Right Hand Carriage
Pillow Block Housing
Pillow Block Bearing
Roller Thrust Plate
HCC553237 C-Flex, 1” x 3”, 3-Hole
Notes
2 required per tine
2 required per tine
Casting Mark: LF/RR
Casting Mark: RF/LR
For 2010 and newer models; beginning
with serial number 310xxx
HCC553238 Rock Guard
HCC553239 Retainer for Rock Guard
HCC853092 C-Flex, 1” x 3”, 4-Hole
800.368.7773
Price
$2.67
$1.16
$127.37
$25.45
$25.45
$34.94
$40.02
$4.03
$87.25
$43.61
$8.00
For 2009 and earlier models;
serial number prior to 310xxx
Product ID
$95.57
Description
Boule Cristal
light, bracket sold
separately
Price
$79.95
LGT020000
Mounting bracket,
“B” style
$9.95
LGT020010
Mounting bracket,
“FZ” style
$9.95
LGT020020
Mounting bracket,
“R” style
$9.95
LGT029000
Halogen bulb
$9.95
LEATHERMAN TOOLS
100% Stainless Steel Multi-Purpose Tools
with 25 Year Guarantee
Leatherman Tools
LTH831102 Super Tool 300 with leather sheath
LTH830009 Charge Xti with leather sheath
Price
$69.99
$79.99
Notes
Large tool.
Discontinued. Price reduced!
Super Tool 300
Charge XTi
POSTBOXX
Unique Design and Function - No Holes to Dig!
The Postboxx is the only patented and certified mailb x that is free standing
using Sand or Gravel. Simply fill the pedestal with the desi ed ballast and
you have an elegant mailbox that is safe and durable.
Are You Tired of Having Your Mailbox Smashed?
The Postboxx may possibly be the last mailbox you’ll ever buy. Made from high
quality, sturdy, heavy impact polyethylene, this mailbox is
able to withstand the toughest abuse.
Sick of Looking at a Dingy, Unappealing Mailbox?
The Postboxx is made to complement the beauty and
charm of your home and comes in a variety of colors that
never needs repainted. The Postboxx is made to withstand
the elements and cleans easily, just wipe it or hose it off.
Price
PBX010000
Postboxx mailbox, black
$89.99
PBX020000
Postboxx mailbox, estate brown
$89.99
PBX030000
Postboxx mailbox, hunter green
$89.99
PBX040000
Postboxx mailbox, stone gray
$89.99
PBX050000
Postboxx mailbox, brick red
$89.99
PBX060000
Postboxx mailbox, white
$89.99
TRACTOR SAFETY LIGHTS
Universal Mounting
Brackets Included
• Designed to comply with Ohio’s lighting law
• Breakaway extensions prevents damage to light
bar and or tractor
• Can be easily folded in for field ope ation and in
close quarters
• Adjustable width extensions that extend from
9-1/2’ up to 14’
• Adjustable width universal mounting brackets
that fit most t actors with minimal modific tions
• Powder coat paint finis
• Draws only 4.7 AMPS
Product ID
Description
LGT090000
Tractor safety light bar
www.sidist.com
Price
$367.00
75
SWIFT HITCH
PORTABLE WIRELESS BACK-UP CAMERA
Quickly hitch up any trailer, camper or snow plow with Swift Hitch:
• Hi-Resolution Color Display
• Camera with Magnetic Base
• Water Resistant
• Transmission Distance of 300 Feet
• Night Vision Viewing Range of 15 Feet
• Battery Run Time of 10 hours
New
Product
Swift Hitch
Product ID
Description
TPL100000
Swift Hitch, includes camera, display, storage case, suction cup mount
Price
$259.00
SCHUCK CUSHION HITCHES
Model 320
The Custom Hitch Advantage
Save time and effort on every hook-up, and that means saving money for you. It eliminates the frustrating job of backing
into an exact position for hookup. The telescoping, swivel cushion tongue extends out a full (7) seven inches beyond the
“Tow” position and swivels 60o laterally (or 12” left to right) for fast, easy hook-ups.
Schuck 300 Series Hitches
750 lbs tongue weight, 20,000 lbs. pulling capacity
For 1 or 2 axle trailers up to 10,000 lbs.
SHU103100 Model 310 cushion hitch. Weld on (not shown)
Model 320 cushion hitch. Bolt on for 8-12” bolt pattern
SHU103200
For factory bumpers with a fl t mounting surface and all Schuck bumpers
Model 340 cushion hitch. For 2” receiver tube, includes pin and clip
SHU103400
Note: Hitch can be turned over for a 4” tongue height difference
Price
$195.00
Model 720 cushion hitch. Bolt on for 8-12” bolt pattern, includes stiffening brackets
SHU107200
Model 740 cushion hitch. For 2” receiver tube, includes pin and clip.
SHU107402
Note: There is a 2-1/2” drop from center of receiver tube to top of tongue.
Model 740 cushion hitch. For 2-1/2” receiver tube, includes pin and clip.
SHU107403
Note: There is a 2-1/2” drop from center of receiver tube to top of tongue.
Model 750 cushion hitch with pullout swivel. Bolt on for 10-1/2” to 12” bolt pattern, includes stiffening brackets
SHU107500
Model 750RTR cushion hitch with pullout swivel. For 2” receiver tube, includes pin and clip.
SHU107507 Note: There is a 3-1/2” drop from center of receiver tube to top of tongue. Tongue height should be 16-18” off
the ground. Measure from center of receiver tube to ground and subtract the 3-1/2” drop.
Model 750RTR cushion hitch with pullout swivel. For 2-1/2” receiver tube, includes pin and clip.
Model 750RT cushion hitch with pullout swivel. For 2” receiver tube, includes pin and clip.
Model 750RT cushion hitch with pullout swivel. For 2-1/2” receiver tube, includes pin and clip.
Price
$260.00
1,000 lbs tongue weight, 40,000 lbs. pulling capacity
Requires 12” from center of bumper mounting holes to spare tire
800.368.7773
$215.00
Model 340
Model 720
$215.00
Model 740
$305.00
$305.00
$330.00
Model 750
$510.00
$510.00
$535.00
Model 750 RT
$510.00
$535.00
Model RTR
SCHUCK CUSHION HITCHES
Swivel Tongue for
quick, easy hook-ups
A Urethane Tips “Compress” to Absorb
Minor Shocks!
B Urethane Cushions “Compress” to
Absorb Major Shocks!
A
Model 750
B
2,000 lbs tongue weight, 50,000 lbs. pulling capacity
For 2 Ton Trucks
Model 820 cushion hitch. Bolt on for 8-12” bolt pattern, includes stiffening brackets
SHU108200
SHU108400 Model 840 cushion hitch. For 2” receiver tube, includes pin and clip.
SHU108401 Model 840 cushion hitch. For 2-1/2” receiver tube, includes pin and clip.
Model 850 cushion hitch with pullout swivel. Bolt on for 12-15” bolt pattern, includes stiffenSHU108500 ing brackets. For factory bumpers with a fl t mounting surface and all Schuck bumpers
Requires 13-1/2” from center of bumper mounting holes to spare tire
Schuck Receiver Tube
2” Receiver tube
SHU100003
For 8-12” bolt pattern, includes chain hooks and stiffening brackets
Product ID
SHU900300
SHU900700
SHU900800
SHU900002
SHU900003
SHU900004
SHU900005
SHU900011
SHU900012
SHU900013
SHU900010
SHU900001
SHU900014
Model 850
Price
$330.00
$410.00
$410.00
$435.00
$710.00
Price
$145.00
Schuck Parts & Accessories
Description
300 Series replacement kit; 2 cushions, 3 bearings
Cushion, 300, 700 series
Bearing, 300, 700 series
Cushion, 800 series
Bearing, 800 series
Replacement tongue, 300 series
Replacement tongue, 700 series
Replacement tongue, 800 series, one hole
Replacement tongue, 800 series, two holes
Stone shield, for Schuck bumper
Stiffening brackets; 20” long
Mounting brackets, for Schuck bumper; specify make, model and year
Price
$48.00
$89.00
$117.00
$14.00
$7.00
$14.00
$7.00
$48.00
$63.00
$103.00
$113.00
$58.00
$30.45
$112.00
2” Receiver Tube
Replacement Kits
Cushion & Bearing
SCHUCK BUMPER
The Model 1000 Bumper is specifically desi ned
for all pickup trucks. The 50,000 P.S.I. yield strength
tubing makes this the strongest commercial bumper
available. The bumper also requires a model specific
mounting bracket, stone shield and a hitch to
complete. Custom installation such as drilling holes
or welding braces to frame may be required in some
cases. Available in black only.
Schuck Bumper
Product ID
Description
SHU001000
Model 1000 heavy duty bumper
Must order mounting brackets, stone shield and hitch to complete
Price
$405.00
www.sidist.com
77
PROPEL SLIDING DOOR AUTOMATION
Automate Your Sliding Shed Doors!
800.368.7773
PROPEL SLIDING DOOR AUTOMATION
SLIDING DOOR AUTOMATION PRICING
Single Doors
Opening
Price
Width
7’
$1,095.00
8’
$1,175.00
9’
$1,265.00
10’
$1,297.00
11’
$1,329.00
12’
$1,387.00
13’
$1,498.00
14’
$1,561.00
15’
$1,625.00
16’
$1,699.00
17’
$1,772.00
18’
$1,810.00
19’
$1,849.00
20’
$1,929.00
21’
$2,071.00
22’
$2,114.00
23’
$2,158.00
24’
$2,252.00
Twin Doors
Opening
Price
Width
14’
$2,132.00
16’
$2,292.00
18’
$2,473.00
20’
$2,537.00
22’
$2,601.00
24’
$2,827.00
26’
$2,882.00
28’
$2,938.00
30’
$3,098.00
32’
$3,341.00
34’
$3,487.00
36’
$3,566.00
38’
$3,645.00
40’
$3,812.00
42’
$4,104.00
44’
$4,180.00
46’
$4,257.00
48’
$4,521.00
Single System includes:
Twin System includes:
• 1 Pro 1000 plug ‘n play
controller/wall station
• 1 motor & drive track
• 1 cincher
• pre-wired refle tive
photocell
• door guides
• 1 wireless wall station
• 2 four-button remote
controls
• all mounting hardware.
controller/wall stations
• 2 motors & drive track
• 2 cinchers
photocell
• door guides
controls
Small Twin Doors
Opening
Price
Width
8’
$1,484.00
9’
$1,522.00
10’
$1,574.00
11’
$1,647.00
12’
$1,738.00
Small Twin System (for
doors up to 12’ tall)
includes:
controller/wall stations
• 2 motors & drive track
• 2 cinchers
photocell
• door guides
controls
Accessories
Product
Keyless Entry
4-button remote
Wireless wall station
Cincher
Door Guide & Shims with
hardware
Price
$48.00
$32.00
$35.00
$42.00
$40.00
www.sidist.com
79
MONTEZUMA TOOLBOXES
FEATURES:
•
•
•
•
•
•
16 gauge steel or .100” thick tread aluminum construction
Welded seams, no spot welding
Holds metric and/or S.A.E. tools
Lid secures tools in position when closed
Gas spring raises lid when unlatched for easy tool access
Weather stripping creates a tight seal against dust and
moisture
• Chrome plated side handles on both sides of chest
• Locking latch secures tools from unauthorized use
• Lock cylinder has double-cut keys for easier locking and
unlocking
• Powder coated with a tough, scratch resistance, textured,
powder paint
• Full width wrap around aluminum drawer pull
• 5 year warranty
• Tool inventory at a glance
Montezuma Portable Steel Toolbox
36” wide x 17-3/8” deep x 21-1/2” high. Weighs 91 lbs.
Product ID
Vendor ID
Description
CPL364500
XL450B
Portable steel toolbox, 36” x 17-3/8” x 21-1/2”, black
Price
$495.00
30” wide x 19” deep x 20-1/8” high. Weighs 89 lbs.
Product ID
Vendor ID
Description
CPL003100
LA400B
Portable steel toolbox, 30” x 19” x 20-1/8”, black
$475.00
Price
CPL003101
LA400R
Portable steel toolbox, 30” x 19” x 20-1/8”, red
$475.00
XL450
Product ID
Vendor ID
Description
CPL002203
ME300AL
Portable aluminum toolbox, 30” x 15” x 18-1/8”, brite
Price
$450.00
LA400
Product ID
Vendor ID
Description
CPL002200
ME300B
Portable steel toolbox, 30” x 15” x 18-1/8”, black
Price
$375.00
CPL002201
ME300R
Portable steel toolbox, 30” x 15” x 18-1/8”, red
$375.00
CPL002202
ME300W
Portable steel toolbox, 30” x 15” x 18-1/8”, white
$375.00
26” wide x 17-3/8” deep x 21-1/2” high. Weighs 73 lbs.
Product ID
CPL263501
IM350R
Price
Portable steel toolbox, 26” x 17-3/8” x 21-1/2”, red
$395.00
Product ID
CPL001200
SM200B
Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, black
$295.00
Price
CPL001201
SM200R
Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, red
$295.00
ME300AL
800.368.7773
ME300
IM350
SM200
2016 SHOW SCHEDULE
January 5-7, 2016
Keystone Farm Show
York, Pennsylvania
Booth 420-423
July 22-24, 2016
Four State Farm Show
Pittsburg, Kansas
Lot 425-426
September 13-15, 2016
Husker Harvest Days
Grand Island, Nebraska
Lot 354
August 2-4, 2016
Farm Fest
Redwood Falls, Minnesota
Lot 214
Farm Science Review
Columbus, Ohio
Lot 581
August 9-11, 2016
Empire Farm Days
Seneca Falls, New York
West Time Saver Ave., Lot 709
October 13-15, 2016
WKMA 3i Show
Dodge City, Kansas
Lot I-62, I-64, I-66
February 10-13, 2016
National Farm & Machinery Show
Louisville, Kentucky
August 16-18, 2016
Pavilion, Booth 8004
Ag Progress Days
Rock Springs, Pennsylvania
February 26-27, 2016
January 12-14, 2016
West 2nd Street
Mid-South Farm & Gin Supply
Fort Wayne Farm Show
Memphis, Tennessee
Fort Wayne, Indiana
August 16-18, 2016
Booth 919-921
Booth 760-766
Dakotafest
Mitchell, South Dakota
March 1-3, 2016
January 17-19, 2016
Lot 532
Quad Cities Farm Equipment Show Hawkeye Farm Show
Rock Island, Illinois
Cedar Falls, Iowa
August 30-September 1, 2016
Booth 701-703
Booth 406-412
Farm Progress Show
Boone, Iowa
January 27-28, 2016
March 9-10, 2016
Lot 524
Midwest Ag Expo-Illinois
Triumph of Ag Expo
Gordyville USA, Gifford, Illinois
Omaha, Nebraska
Booth 225
Booth 631-633
Clay County Fair
Spencer, Iowa
January 28-30, 2016
March 29-31, 2016
7th Avenue & 2nd Street
Power Show Ohio
WPS Farm Show
Columbus, Ohio
Oshkosh, Wisconsin
Booth D6538-D6541
Bricker Building, Booth 012
Big Iron Farm Show & Expo
West Fargo, North Dakota
April 14-16, 2016
February 2-4, 2016
Ag Building, Booth A32-A34
Iowa Power Farming Show
Oklahoma City Farm Show
Des Moines, Iowa
Oklahoma City, Oklahoma
Booth 1241
Booth AB515
February 3-5, 2016
Southern Farm Show
Raleigh, North Carolina
Booth 3305
November 29-30, Dec. 1, 2016
Greater Peoria Farm Show
Peoria, Illinois
Booth H0827-H0831
December 6-8, 2016
Nebraska Power Farming Show
Lincoln, Nebraska
Booth 1430
December 8-10, 2016
Tulsa Farm Show
Tulsa, Oklahoma
December 13-15, 2016
Indiana-Illinois Farm Equip. Show
Indianapolis, Indiana
Booth 203, 204, 204A
July 19-21, 2016
Wisconsin Farm Technology Days
Lake Geneva, Wisconsin
Lot 648
www.sidist.com
81
S.I. Distributing Inc. would like to thank you for your business.
Successful Innovations describes the type of products that we offer. Our goal is to provide the best
service and quality products for your dealership and
your customers.
This is our 2016 catalog, which we publish at the
beginning of each year. If you would like additional
copies of our catalog, or if we can be of any assistance,
please feel free to call 800-368-7773 and ask for any
member of our friendly staff.
The
2016 Catalog
PRICES & SPECIFICATIONS: Prices and
specific tions are subject to change without notice. All shipments are billed at the price prevailing at the time of shipment.
All prices are F.O.B. Spencerville, Ohio.
TERMS: A satisfactory credit reference must be furnished before shipment can be made. Initial orders will be shipped
C.O.D., or credit card until a credit line is established. All dealers are required to have a blanket certific te of exemption form
for general sales tax on file with u . Any checks returned because of insuffici t funds will be charged $25 per occurrance.
ORDERS: Phone orders may be placed by calling 800-368-7773.
Orders may be mailed to: S.I. Distributing Inc.
13540 Spencerville Road
Spencerville, Ohio 45887
Orders may be faxed to: 877-398-8074
Orders may be emailed to: [email protected]
For best service please fax or email orders to guarantee accuracy.
SHIPMENT: All orders will be shipped in the order they are received. Most orders are shipped the same day if they are
received before 12:00 p.m. EST. Orders can be shipped UPS ground, UPS second day air, UPS next day air, or any other
available means. Orders will be shipped UPS ground unless specified di erently by the customer. Truck freight will be
used when price competitive to UPS. Shipments to an address other than the billing address will be charged an additional
$10.00 drop ship charge. An expedited order charge of $10.00 will be added to all orders received after 12:00 p.m. that
request same day shipment by ground.
SHORTAGES & DAMAGES: S.I. Distributing Inc. is not responsible for goods damaged or lost in transit. All claims of
freight shortages and/or damages must be noted on the bill of lading or with the driver at the time of delivery. Failure to
note any freight shortages and/or damages makes the consignee responsible for all shortages and/or damages to that
shipment. S.I. Distributing Inc. will assist the consignee in filing f eight shortage and/or damage claims when the consignee
noted such at time of delivery.
RETURN POLICY: Any merchandise being returned must have a Return Goods Authorization number (RGA#) printed
clearly on the outside of the box. A Return Goods Authorization number can be obtained by calling S.I. Distributing Inc.
Authorized returns must be returned freight prepaid and will be subject to a minimum restocking charge of 15%. A copy of
the original sales invoice must be included with all returns. No exceptions. An additional charge will be made if the
merchandise is received in less than saleable condition. All merchandise shipped to S.I. Distributing without prior authorization is subject to refusal and may be returned freight collect. Warranty returns must fully explain the nature of the defect
and the Return Goods Authorization number must be present.
800.368.7773
Spencerville, Ohio
800-368-7773
www.sidist.com
Spencerville, Ohio 45887
800.368.7773 • www.sidist.com
Successful Innovations for Agriculture Since 1979

Low Res - 7Mb - SI Distributing

Transcription

Similar documents

Logging onto JDParts for the first time - Wickham

John Deere tractor

Saturday, June 2 – 10:00 AM

PRINT the Sell Sheet PDF

33 Series Sweeperweb

2016 Poster

GATOR™ - John Deere

175th Anniversary Collector Edition Models

Nachusa Bison – John Deere Loop Bike Route

Why would you buy a used John Deere?