maritime - ApolloMilitary

MARITIME
URBAN
COBRA SQR Ladder
TACTICAL BOARDING AND ASSAULT SOLUTIONS
Technical Manual
CONTENTS
SCOPE 1
INTRODUCTION 1
KEY FEATURES MARITIME 2
TECHNICAL DATA MARITIME 3
ASSEMBLY AND DISASSEMBLY MARITIME 4
ESTABLISHING THE COBRA LADDER MARITIME 5
KEY FEATURES URBAN 6
TECHNICAL DATA URBAN 7
ASSEMBLY AND DISASSEMBLY URBAN 8
ESTABLISHING THE COBRA LADDER URBAN 9
STORAGE SOLUTIONS
10
OPERATIONS GUIDE
11
OPERATIONS GUIDE FLEXIBLE JOINT
12
TABLE OF CONTENTS
13
MAINTENANCE AND WARRANTY
14
SCOPE
This document provides all necessary information and knowledge
about the use and maintenance of the COBRA SQR Titanium Tactical
Ladder /Pole for both Maritime & Urban use.
Manufactured in Australia & distributed by Apollo Australia Pty Ltd.
INTRODUCTION
Apollo products offer a high level of reliability strength, simplicity,
operational safety and easy maintenance characteristics that suit military
maritime and urban applications.
The Apollo COBRA SQR Titanium Tactical Ladder / Pole offers easy covert
access to vessels, rigs, decks, floors and buildings and is especially
effective for use from RIBs. The COBRA SQR Tactical Ladder is also
swimmable underwater.
It is made of non-magnetic titanium materials that are corrosion proof/resistant
against seawater and stable under all environmental conditions. The modular
design allows for easy transport and assembly under most circumstances.
To facilitate easy climbs and descents the ladders rungs are spaced and
incorporate an anti skid surface and side slippage protection.
The Apollo COBRA Tactical Ladder has implemented a unique coupling design called
the SQR (Secure Quick Release) self locking mechanism that allows the user to
connect and disconnect the ladder sections with absolute ease. Whether you are in
dark or have no visibility underwater the SQR locking mechanism is simple to use.
The buoyancy characteristics of the ladder modules can be adjusted to either
positive, neutral; or negative to suit end user applications.
1
Structural hook with
Stiffened ribs
KEY FEATURES MARITIME
LA00042
The main features of the COBRA SQR Tactical Ladder climbing pole
are:
Optional
Polyurethane Rollers
for quiet operation
• A Modular Design
• Long Reach: any number of sections can be joined together
• Built from water tight superlight Titanium pipe
(neutral weight in water)
SQR Quick connection
Hand protection
• 4 light Titanium steps for each section, equipped with hand protection
hilts for safe climbing and descent. To facilitate easy climbs and
descents the ladders rungs are spaced with an anti skid surface and
side slippage protection.
• SQR (Secure Quick Release) self locking mechanism that allows the
user to connect and disconnect the ladder sections with absolute ease.
• Colour is battleship grey to blend well with both the ocean and the hull of
a ship.
• The Apollo COBRA Titanium Tactical Ladder / Poles offer easy covert
access to decks, floors and buildings and is especially effective for use
from RIBs.
• Quiet Operation (Rollers and Optional rubber coated hooks)
Anti-skid rung
Side slippage
protection
LA00010
1.5mtr
• Structural Titanium Hook
• High Load Capacity of up to 1000kgs
• Protective Hand Grips/Steps
• Carries 4 – 6 Operators Simultaneously
• Corrosion Resistant materials
LA00026
• Non-Magnetic (all Titanium)
• Stable and Secure Deployment
LA00025
End connectors with and
without rungs
2
TECHNICAL DATA
MARITIME
Technical Specifications of Each Section:
Material: High Grade Titanium Alloy
Magnetic Signature: Non - Magnetic
Section Lengths: 1.5m or 3.0m
Section Weight 1.5 Meter: 2.3kg
Section Weight 3.0 Meter 4.2 kg
Total Load: 1000kgs
Step Load: 150kgs
Max. Load: 1000kg
Step Height: 37cm
Number of steps per 1.5m: 4
Safety features:
• Hand protection hilts
• Anti-skid step surface
• Step side lugs
• SQR safety locking system
Maximum Total Height: Operators choice
Technical Specifications of Grapnel Hook:
Material: High Grade Titanium
Coupling: High Grade Titanium
LA00020
LA00022 LITE
NSN 4030-66-158-4926
Weight: Size Dependant
Max. Load: 1000kgs
Hook Sizes: S,M,L
Custom hooks are available on request.
Optional Rubber Coating is also available.
LA00018
LA00016
3
ASSEMBLY AND DISASSEMBLY
MARITIME
The COBRA SQR Tactical Ladder is simple to assemble and disassemble due to the unique
SQR (Secure Quick Release) coupling. The coupling is automatically self locking.
1. Assembly / Disassembly - Section to Section
In order to assemble the sections see diagram below:
ASSEMBLY AND DISASSEMBLY OF HOOK /GRAPNEL
In order to assemble or disassemble the grapnel to the section, follow the same
connection system as above.
ASSEMBLY AND DISASSEMBLY OF LUG FOR S/STEEL ROPE LADDER
In order to assemble or disassemble the lug to the section, follow the same
connection system as above.
LA00025
4
ESTABLISHING THE COBRA
FOR MARITIME USE
1. When using the ladder always attempt to hang it freely, like a rope, and
support it only by the hook in a position as close to the pole as possible.
Where ever practical do not support the ladder from just the hook tips.
See Diagrams.
2. Always leave the opposite end of the ladder free hanging or use an elastic
“bungee” strap to secure. Do not support it on both ends. See Diagrams.
LA00042
Tritium Light Cell for night use
5
KEY FEATURES URBAN
The main features of COBRA SQR Tactical Ladder climbing pole are:
• A Modular Design
LA00005
• Long Reach: any number of sections can be joined together
• Built from water tight superlight Titanium pipe
• 4 light Titanium steps for each 1.25m section equipped with hand
protection hilts for safe climbing and descent. To facilitate easy
climbs and descents the ladders rungs are spaced with an anti
skid surface and side slippage protection.
• SQR (Secure Quick Release) self locking mechanism that allows
the user to connect and disconnect the ladder sections with
absolute ease.
SQR Quick connection
Anti-skid rung
Side slippage
protection
• Colour is a mid grey that blends well with most Urban & Maritime
environments.
The Apollo COBRA Titanium Tactical Ladder / Poles offer easy covert
access to decks, floors and buildings and are simple to assemble and
transport.
Hand protection
• Quiet Operation (incorporation Stealth Polyurethane (PU) Rollers on
both hooks and crossbars)
• Structural Titanium Hook
• High Load Capacity of up to 1000kgs
• Protective Hand Grips/Steps
• Carries multiple Operators simultaneously dependant on standoff
(see attached chart)
• Corrosion Resistant materials
• Non-Magnetic (all Titanium)
• Stable and Secure Deployment
LA00055
Bottom Stabiliser
6
TECHNICAL DATA URBAN
Technical Specifications of Each Section:
Material: Grade 5 Titanium Alloy
Magnetic Signature: Non- Magnetic
Section Lengths: 1.25m
Section Weight: 2.51kgs
Total Load: 1000kgs
Step Load: 150kgs
Number of steps per 1.25m: 4
Safety features:
• Hand protection hilts
• Anti-skid step surface
• Step side lugs
• SQR safety locking system
LA00042
OPTIONAL ACCESSORIES
Maximum Total Height: Operators choice
Technical Specifications of Top Stabilizer with PU Rollers:
Coupling: High Grade Titanium
Weight: 0.93kg
LA00025
Technical Specifications of base Stabilizer with Coupling:
Base & Coupling: High Grade Titanium
End connectors with and
without rungs
Weight: 1.42kgs
Technical Specifications of Grapnel Hooks (Optional for
Urban use):
Coupling: High Grade Titanium
Weight: Size of Hook dependant (See Spec’s)
Max. Load: 1000kgs
Custom hooks are available on request.
Hook Sizes: S, M, L
Custom hooks are available on request.
LA00026
Optional Rubber Coating is also available.
7
ASSEMBLY AND DISASSEMBLY
URBAN
The COBRA SQR Tactical Ladder is simple to assemble and disassemble due to the unique
SQR (Secure Quick Release) coupling. The coupling is automatically self locking.
1. Assembly / Disassembly - Section to Section
In order to assemble the sections see diagram below:
ASSEMBLY AND DISASSEMBLY OF HOOK /GRAPNEL OR TOP STABILIZER
1. In order to assemble or disassemble the grapnel or the top stabilizer to the
section, follow the same connection system as above.
ASSEMBLY AND DISASSEMBLY OF LUG FOR THE BASE STABILIZER
In order to assemble the lug for the Ladder base stabilizer, follow the same
connection system as above.
ASSEMBLY AND DISASSEMBLY OF LUG TO THE BASE STABILIZER
In order to assemble the Ladder to the base stabilizer push the Ladder with Lug
attached into the base then activate the double acting bulldog pin. Reverse for
disassembly.
LA00025
8
ESTABLISHING
THE COBRA FOR
URBAN USE
1. When using the ladder always attempt to
have the minimum amount of stand off, as
this proportionally affects the static load.See
Diagrams.
1500Kgs
1500Kgs
For Urban use with optional Hooks
2. When using the ladder always attempt to
hang it freely, like a rope, and support it only
by the hook in a position as close to the pole as
possible. Do not support it from just the hook
tips. See Diagrams page 5.
1000Kgs
500Kgs
0
0
2000Kgs
Static Load
2000Kgs
1500Kgs
1000Kgs
500Kgs
3. Always leave the opposite end of the ladder
2
4
4.5 “bungee” strap
free hanging
or3 use an elastic
to secure.
Do not support it on both ends. See
Standoff
Area
Diagrams.
0
1
0
1
2
3
4
4.5
Standoff from structure (meters)
Height 7.79 meters
7
6
5
Ladder length 9 meters
Static Load (400Kgs)
Ti 60mm OD - 1.6mm - 850MPA
4
3
2
1
0
300
0
1
2
3
4
4.5 mtr
Standoff from structure (meters)
9
2.2mtr
NSN 8145-66-158-4928
LA00032
STORAGE SOLUTIONS
DEPLOYMENT - SEA - AIR - LAND
The Spacecase© Storage Containers we provide with the Cobra
Ladder are ideal for storage and transit protection.
These Storage Containers are made from a high strength
UV stabilised polyethylene material; they are stackable and
interlocking and have pad-lockable quality catches as standard.
They offer ideal protection against harsh environmental conditions
as they are highly durable, impervious to most chemicals, moisture
and will not dent or rust.
LA00030
NSN 8105-66-158-4929
COBRA LADDER BAG
Customised self draining bag, will hold up to 10 x 1.5 meter sections
of ladder plus hooks. For easy transit to area of operations.
COBRA URBAN PACK
The Cobra Urban Pack has been developed and put together with over 30 years
of military pack experience. The Pack has been designed and manufactured by
SORD Australia in its Melbourne facility. The tried and tested 1606T Polymer
frame and straps combo compliments our Urban Pack. Offering comfort and
support, this combination allows you to go the distance with the weight solders
are used to.
1606T Polymer Pack Frame and Straps
•Compact and light weight
•Improved ergonomics
•Supports loads over 90 Kgs
•Re curved arms provide stable attachment points.
•Made from our proprietary fragmentation resistant polymer
•Contoured Shoulder Straps for effective weight transference over the back and shoulders
•Hardened foam padding, minimises bunching, sagging and hot spots by dispersing weight over a greater area.
•Open back ventilation for breathability in hot and tropical climates.
LA00030P
10
OPERATIONS GUIDE
LA00022 LITE
LARGE HOOK LIGHT
= 1000 Kgs =
PRIMARY
POSITION
LARGE HOOK LIGHT
= 650 Kgs =
SECONDARY
POSITION
LA00018
MEDIUM HOOK
= 1000 Kgs =
PRIMARY
POSITION
MEDIUM HOOK
= 650 Kgs =
SECONDARY
POSITION
LA00016
SMALL HOOK
= 1000 Kgs =
PRIMARY
POSITION
SMALL HOOK
= 1000 Kgs =
SECONDARY
POSITION
= 125 kg + 100% Safety Factor = 250kg
11
OPERATIONS GUIDE FLEXIBLE JOINT
Flexi-Hook Large
LA00044
Primary
position
=
1000 kg =
=
1000 kg =
=
1000 kg =
=
1000 kg =
Flexi-Hook Large
LA00044
Secondary
position
Flexi-Hook Medium
LA00042
Primary
position
Flexi-Hook Medium
LA00042
Secondary
position
20 0
200
LA00042
= 125 kg + 100% Safety Factor = 250kg
12
TABLE OF CONTENTS
LADDER MARITIME
CODE
NSN NUMBER
DESCRIPTION
SIZE / TYPE
WEIGHT
LA00010
5540-66-158-4925
Ladder 1.5M interlocking Sections 1.5 Meter
Titanium
2.3 Kilograms
Ladder 3M interlocking Sections 3 Meter
Titanium
4.2 Kilograms
LA00011
LA00016
4030-66-159-4581
Hook Small
Structural Titanium
2.4 Kilograms
LA00018
4030-66-159-4582
Hook Medium
Structural Titanium
1.24 Kilograms
LA00020
4030-66-158-4926
Hook Large
Structural Titanium
2.4 Kilograms
LA00022
4030-66-159-4583
Hook Large Light
Structural Titanium
1.8 Kilograms
LA00025
5340-66-158-4972
End Cap without rungs
Titanium
0.49 Kilogram
End Cap with rungs
Titanium
0.96 Kilogram
LA00026
LA00030
8105-66-158-4929
Ladder Bag
Heavy Duty Fabric
1.9 Kilograms
LA00032
8145-66-158-4928
Storage Box
2200cm x 550cm x 450cm
35 Kilograms
Easy Glide Teflon Lubricant
Propellant
LA00035
LA00042
4030-66-159-4584
Flexi-Hook Medium Tritium Lights and Rollers
Structural Titanium
1.48 Kilograms
LA00044
4030-66-159-4585
Flexi-Hook Large Tritium Lights and Rollers
Structural Titanium
1.82 Kilograms
LADDER URBAN
CODE
NSN NUMBER
DESCRIPTION
SIZE / TYPE
WEIGHT
LA00005
xxxx-xx-xxx-xxxx
Ladder 1.25M interlocking sections
Titanium
2.51 Kilograms
LA00050
xxxx-xx-xxx-xxxx
Top Stabilizer with Rollers
Structural Titanium
0.93 Kilogram
LA00055
xxxx-xx-xxx-xxxx
Bottom Stabilizer base
Structural Titanium
2.49 Kilograms
LA00030P
xxxx-xx-xxx-xxxx
Cobra Urban Pack
MILSPEC Fabrics &
Fastenings
4.9 Kilograms
LA00025
5340-66-158-4972
End Cap without rungs
Titanium
0.49 Kilogram
13
MAINTENANCE
The COBRA SQR Tactical Ladder is virtually maintenance free and should give you many years of service.
The following should be done after each use:
1.Freshwater-rinse to remove debris. A mild soapy solution may be used, but after cleaning, please
rinse with freshwater. Warm water will remove salt crystals far more efficiently than cold.
2.Store in a dry, shaded area.
3.After use we recommend the application of a dry Teflon lubricant on all couplings. This will ensure a
smooth easy connection.
WARRANTY
All products sold by Apollo Australia Pty Ltd are covered by a 12 month warranty, and as implied by law,
from date of purchase, by the end user, subject to the following conditions.
a) That upon “proof of warranty” and if required “relevant service record” Apollo Australia will
repair, replace, credit or offer an upgrade at our discretion for any product or part with defects
in workmanship or materials. Apollo Australia makes no representation as to suitability for use nor
accepts any responsibility for any incidental damage to persons or property.
b) If repairs are carried out on products void of warranty, all labour, parts and freight costs will be charged.
c) Damage, neglect, accident, improper repair, or fair wear and tear is not covered.
d) All items should be returned FIS to Apollo Australia P/L along with warranty details. For your
protection we suggest all items should be sent to us by traceable courier, certified or registered mail.
• e) An RGA (Returned Goods Authority) number is to be requested from Apollo Australia prior to
goods being returned for warranty or repair.
f) This warranty becomes null and void if:
• The product has not been properly serviced and maintained as per this manual.
• Unauthorized modifications have been made to the product.
• The product has been abused or subjected to conditions which are unusual or exceed the product’s
intended service.
• The product has been serviced by non authorized service agent and/or with non original spare parts.
14
Postal Address
PO Box 391, Winston Hills NSW 2153
Australia
Street Address
Unit 1 / 20 Artisan Road,
Seven Hills NSW 2147
Australia
Tel: (02) 9620 9577
Fax: (02) 9620 9744
Toll Free Fax: 1800 061 742
E-mail: [email protected]
www.apollomilitary.com