PLASMA CUTTING LTE-120H LTE-120M LTE-150H LTE

PLASMA CUTTING LTE-120H LTE-120M LTE-150H LTE

PLASMA CUTTING
The new series of RPT-Torches
with High Frequency Start
EASY FIT
With “EASY
FIT”
A revolutionary solution to save time and money
LTE-120H
LTE-120M
LTE-150H
LTE-150M
LTE-81H
LTE-81M
LTE-101H
LTE-101M
LTE-141H
LTE-141M
LTE-151H
LTE-151M
NEW
able
Coaxial C
Suitable for: LINCOLN® T100
Suitable for: CEBORA® P150 - CP160
Suitable for: TRAFIMET® A80 - Ergocut A81
Suitable for: TRAFIMET® A90 - Ergocut A101
Suitable for: TRAFIMET® A140 - Ergocut A141
Suitable for: TRAFIMET® A145 - Ergocut A151
EAStYPenFdinITg
n
Higher performances
Cleaner cut
Pate
Faster speed
TEC.MO. s.r.l. Via Rio Fabbiani 8 - 40067 RASTIGNANO - BOLOGNA - ITALY E-mail: [email protected]
2010-03-A-LTE-RPT
plasma cutting torches
EASY FIT
LTE-120H
IEC 60974-7
1
ÿþýüûúùø
3
LTE-120M
ÿþýüûúùø
2
LTE-150H
4
ÿþýüûúùø
6
LTE-150M
ÿþýüûúùø
5
LTE-81H
EAStYPenFdinITg
n
7
LTE-81M
Pate
ÿþýüûúùø
8
LTE-101H
NEW
able
Coaxial C
10
LTE-101M
ÿþýüûúùø
11
ÿþýüûúùø
9
LTE-141H
12
LTE-141M
13
LTE-151H
14
LTE-151M
ÿþýüûúùø
16
+ 6m (20ft)
15
ÿþýüûúùø
TEC.MO.® srl is in no way affiliated with CEBORA® TRAFIMET® and LINCOLN®. The parts advertised for sale are not genuine CEBORA® TRAFIMET®
and LINCOLN® parts, but are parts made for and by TEC.MO.® srl. Reference to CEBORA® TRAFIMET® and LINCOLN® machine, torches and numbers
2
are for your convenience only. We reserve the right to substitute genuine CEBORA® TRAFIMET® and LINCOLN® parts in place of TEC.MO.® srl parts.
2010-03-A-LTE-RPT
plasma cutting torches
LTE-Torches
LTE-120 Suitable for: LINCOLN® T100
item#
1
2
3
16
Catalog #
01201E
01400E
09781FX
05285FX
Description
LTE-120H Hand torch head EASY FIT, w/ handle & parts.
LTE-120M Machine torch head EASY FIT, w/positioning tube & parts
Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable, (central connector)
Extension, 6m (20 ft), complete with EASY FIT, Coaxial Cable
LTE-150 Suitable for: CEBORA® P150 - CP160
item#
4
5
6
16
Catalog #
02001E
04300E
09781FX-C
05285FX
Description
LTE-150H Hand torch head EASY FIT, w/ handle & parts.
LTE-150M Machine torch head EASY FIT, w/positioning tube & parts
Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable, (central connector)
Extension, 6m (20 ft), complete with EASY FIT, Coaxial Cable
LTE-81 Suitable for: TRAFIMET® A80 - Ergocut A81
item#
7
8
9
16
Catalog #
06802E
06811E
09781FX-T
05285FX
Description
LTE-81H Hand torch head EASY FIT, w/ handle & parts.
LTE-81M Machine torch head EASY FIT, w/positioning tube & parts
Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable, (central connector)
Extension, 6m (20 ft), complete with EASY FIT, Coaxial Cable
LTE-101 Suitable for: TRAFIMET® A90 - Ergocut 101
item#
10
11
9
16
Catalog #
06001E
06600E
09781FX-T
05285FX
Description
LTE-101H Hand torch head EASY FIT, w/ handle & parts.
LTE-101M Machine torch head EASY FIT, w/positioning tube & parts
Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable, (central connector)
Extension, 6m (20 ft), complete with EASY FIT, Coaxial Cable
LTE-141 Suitable for: TRAFIMET® A140 - Ergocut 141
item#
12
13
9
16
Catalog #
06201E
06400E
09781FX-T
05285FX
Description
LTE-141H Hand torch head EASY FIT, w/ handle & parts.
LTE-141M Machine torch head EASY FIT, w/positioning tube & parts
Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable, (central connector)
Extension, 6m (20 ft), complete with EASY FIT, Coaxial Cable
LTE-151 Suitable for: TRAFIMET® R145 - Ergocut A151
item#
14
15
9
16
Catalog #
06901E
06910E
09781FX-T
05285FX
TEC.MO.® s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Description
LTE-151H Hand torch head EASY FIT, w/ handle & parts.
LTE-151M Machine torch head EASY FIT, w/positioning tube & parts
Lead Assembly, 6m (20 ft) EASY FIT, Coaxial Cable, (central connector)
Extension, 6m (20 ft), complete with EASY FIT, Coaxial Cable
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: [email protected]
3
2010-03-A-LTE-RPT
plasma cutting torches
LTE120H
TE-120H
LTE120M
TE-120M
Suitable for: LINCOLN® T100
Max Current :
Duty Cycle:
Gas:
Gas Pressure:
Gas Flow:
Post Flow Time:
Pilot :
Ignition:
100Amps
100 Amps - 60%
Air
70 psi ( 4.5-5.0 bar )
380 scfh ( 180 lpm )
90 sec. recommended
Electrode to Tip
HF
EAStYPenFdinITg
n
Pate
NEW
able
Coaxial C
IEC 60974-7
1
2a
2b
1a
1b
30
1c
9
8
4
3
31
3b
5
5
3a
6
7
10
11
11
1a
1b
11
1c
12
26
27
13
13
14
17
13
13
13
21
21
22
18
15
16
28
13
23
24
12
4
5
25
25a
6
7
13
13
20
19
24
29
Standard Layout
Hand Torch
Machine Torch
TEC.MO.® srl is in no way affiliated with LINCOLN®. The parts advertised for sale are not genuine LINCOLN® parts, but are parts made for and by TEC.MO.®
4
srl. Reference to LINCOLN® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine LINCOLN® parts
in place of TEC.MO.® srl parts.
plasma cutting torches
2010-03-A-LTE-RPT
LTE120H
TE-120H
LTE120M
TE-120M
Replacement Parts Suitable for: LINCOLN® T100
Torch parts
Item#
1
1a
1b
1c
2a
2b
3
3a
3b
4
5
6
7
8
9
10
11
12
13
ref.
W0300121
W0300122
W0300103
W0300123
W0300124
W0300174
W0300175
W0300128
W0300135
W0300137
W0300133
W0300134
W0300178
W0300179
W0300129
W0300138
14
W0300244
15
W0300245
16
17
W0300180
18
19
W0300181
20
21
W0300182
22
W0300183
23
24
W0300184
25
WO300187
25a
W0300188
26
WO300130
27
W0300131
28
W0300177
29
W0300132
30
W0300142
31
W0300119
Accessories
51851
51807
TEC.MO.® s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Catalog #
01201E
02000.60
60085
06004
07301.20
09605.42
01400E
01400
03310
52540
60020
51140/S
51141/S
51142/S
51144.24
51410
51411
06005
52549
51148
51148.13
51148.16
60328
60348
60348/V
51952
51911
51953
51950
51930
51951
51935
51957
51958
51974
51959
60380
60381
51910
60370
60371
60373
60369
60368
Description
LTE-120H Hand torch head EASY FIT, w/ handle & parts.
O - Ring
Front insulator
Diffusor
Switch
Safety Tab
LTE-120M Machine torch head EASY FIT, w/ positioning tube & parts.
Machine torch head
Positioning Tube
Electrode
Swirl ring
Tip long life ø 1,10 ( replaces W0300125 )
Tip long life ø 1,35 ( replaces W0300126)
Tip long life ø 1,60 ( replaces W0300127 )
Gouging tip ø 2,4
Contact tip ø 1,35
Contact tip ø 1,6
Extended diffusor
Extended electrode
Extended tip ( for contact cutting max. 50A )
Extended tip ø 1,35 - 90A - ( for 51958 + 51959 or 60380 )
Extended tip ø 1,6 - 120A - ( for 51958 + 51959 or 60380 )
Nozzle retaining cap
Contact nozzle retaining cap
Contact nozzle retaining cap, Max.life
Spring holder protection nut
Spacer spring for code 51952
Gouging spacer
Spacer for contact cutting, hand ( for use with item. 6 only )
Spacer for contact cutting, hand ( for use with item. 7 only )
Shield cup, machine ( for use with item. 6 only )
Shield cup, machine ( for use with item. 7 only )
Shield cup, hand ( max. 50A )
Spacer for contact cutting, hand
Spacer for extended tips High Amp.
Locking nut
Spacer complete with springs
Spare springs
Spacer spring
Double pointed spacer
Crown spacer
Gouging spacer
Extractor for swirl ring
Wrench for electrode
Circle cutting attachment
Cutting guide
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: [email protected]
5
2010-03-A-LTE-RPT
plasma cutting torches
LTE150H
TE-150H
LTE150M
TE-150M
Suitable for: CEBORA® P150 - CP160
Max Current :
Duty Cycle:
Gas:
Gas Pressure:
Gas Flow:
Post Flow Time:
Pilot :
Ignition:
150Amps
150 Amps - 60%
Air
70 psi ( 4.5-5.0 bar )
470 scfh ( 220 lpm )
90 sec. recommended
Electrode to Tip
HF
EAStYPenFdinITg
n
Pate
NEW
able
Coaxial C
IEC 60974-7
1
2a
2b
1a
1b
30
1c
9
8
4
3
31
3b
5
5
3a
6
7
10
11
11
1a
11
1b
12
26
1c
13
13
14
17
13
13
15
16
21
23
12
22
25
25a
5
6
7
24
28
29
13
4
18
21
27
13
13
13
Standard Layout
Hand Torch
Machine Torch
20
19
24
TEC.MO.® srl is in no way affiliated with CEBORA®. The parts advertised for sale are not genuine CEBORA® parts, but are parts made for and by TEC.MO.®
6
srl. Reference to CEBORA® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine CEBORA® parts in
place of TEC.MO.® srl parts.
plasma cutting torches
2010-03-A-LTE-RPT
LTE150H
TE-150H
LTE150M
TE-150M
Replacement Parts Suitable for: CEBORA® P150 - CP160
Torch parts
Item#
1
1a
1b
1c
2a
2b
3
3a
3b
4
5
6
ref.
1398
1378
1376
1377
1371
1372
1373
1374
1375
7
8
9
10
11
12
13
1517
1369
1389
14
15
16
17
18
19
20
21
22
23
24
25
25a
1386
26
27
1408
28
29
1406
30
1509
31
3.045.010
Accessories
169
155
TEC.MO.® s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Catalog #
02001E
02000.60
60080
05004
07301.20
09605.42
04300E
04300
03310
52540
60020
51140/S
51141/S
51142/S
51143/S
51144
51410
51411
51412
05005
52549
51148
51148.13
51148.16
51148.18
60330
60350
60350/V
51952
51911
51953
51950
51930
51951
51935
51957
51958
51974
51959
60380
60381
51910
60370
60371
60373
60369
60368
Description
LTE-105H Hand torch head EASY FIT, w/ handle & parts.
O - Ring
Front insulator
Diffusor
Switch
Safety Tab
LTE-150M Machine torch head EASY FIT, w/ positioning tube & parts.
Machine torch head
Positioning Tube
Electrode
Swirl ring
Tip long life ø 1,10
Tip long life ø 1,35
Tip long life ø 1,60
Tip long life ø 1,80
Gouging tip ø 3.0
Contact tip ø 1,35
Contact tip ø 1,6
Contact tip ø 1,8
Extended diffusor
Extended electrode
Extended tip ( for contact cutting max. 50A )
Extended tip ø 1,35 - 90A - ( for 51958 + 51959 or 60380 )
Extended tip ø 1,6 - 120A - ( for 51958 + 51959 or 60380 )
Extended tip ø 1,8 - 150A - ( for 51958 + 51959 or 60380 )
Nozzle retaining cap
Contact nozzle retaining cap
Contact nozzle retaining cap, Max.life
Spring holder protection nut
Spacer spring for code 51952
Gouging spacer
Spacer for contact cutting, hand ( for use with item. 6 only )
Spacer for contact cutting, hand ( for use with item. 7 only )
Shield cup, machine ( for use with item. 6 only )
Shield cup, machine ( for use with item. 7 only )
Shield cup, hand ( max. 50A )
Spacer for contact cutting, hand
Spacer for extended tips High Amp.
Locking nut
Spacer complete with springs
Spare springs
Spacer spring
Double pointed spacer
Crown spacer
Gouging spacer
Extractor for swirl ring
Wrench for electrode
51851
51807
Circle cutting attachment
Cutting guide
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: [email protected]
7
2010-03-A-LTE-RPT
plasma cutting torches
LTE81H
TE-81H
LTE81M
TE-81M
Suitable for: TRAFIMET® A80 - Ergocut A81
Max Current :
Duty Cycle:
Gas:
Gas Pressure:
Gas Flow:
Post Flow Time:
Pilot :
Ignition:
80 Amps
80 Amps- 60%
Air
70 psi ( 4.5-5.0 bar )
340 scfh ( 160 lpm )
90 sec. recommended
Electrode to Tip
HF
EAStYPenFdinITg
n
Pate
NEW
able
Coaxial C
IEC 60974-7
1
2a
1a
1b
7
4
8
2b
3
3b
3a
5
1a
9
6
4
10
5
12
6
11
10
13
Standard Layout
Hand Torch
Machine Torch
8
TEC.MO.® srl is in no way affiliated with TRAFIMET®. The parts advertised for sale are not genuine TRAFIMET® parts, but are parts made for and by TEC.MO.®
srl. Reference to TRAFIMET® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine TRAFIMET® parts
in place of TEC.MO.® srl parts.
plasma cutting torches
2010-03-A-LTE-RPT
LTE81H
TE-81H
LTE81M
TE-81M
Replacement Parts Suitable for: TRAFIMET® A80 - Ergocut A81
Torch parts
Item#
ref.
1
Catalog # Description
06802E
LTE-81H Hand torch head EASY FIT, w/ handle & parts.
1a
EA 0125
07300.60
O - Ring
1b
FH 0560
06801.42
Diffusor
2a
BX 0020
07301.20
Switch
2b
09605.42
Safety Tab
3
06811E
LTE-81M Machine torch head EASY FIT, w/ positioning tube & parts.
3a
06811
Machine torch head
3b
03310
Positioning Tube
4
PR 0109
52580/S
Electrode - Maximum Life
5
PE 0107
60029
Swirl ring
6
PD 0105-10
51170
Tip 1.0
PD 0105-11
51172
Tip 1.1
PD 0105-12
51172.12
Tip 1.2
7
FH 0561
06801.43
Extended diffusor
8
PR 0115
52581/S
Extended electrode - Maximum Life
9
PD 0106-10
51171.10
Extended tip 1.0
PD 0106-12
51173
Extended tip 1.2
10
PC 0115
60384
Nozzle retaining cap
11
CV 0201
51976
Spacer for contact cutting
12
CV 0033
60378
Crown spacer
13
CV 0028
51902
Spacer spring
51861
Circle cutting attachment
51817
Cutting guide
Accessories
TEC.MO.® s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: [email protected]
9
2010-03-A-LTE-RPT
plasma cutting torches
LTE101H
TE-101H
LTE101M
TE-101M
Suitable for: TRAFIMET® A90 - Ergocut 101
Max Current :
Duty Cycle:
Gas:
Gas Pressure:
Gas Flow:
Post Flow Time:
Pilot :
Ignition:
100Amps
100 Amps - 60%
Air
70 psi ( 4.5-5.0 bar )
380 scfh ( 180 lpm )
90 sec. recommended
Electrode to Tip
HF
EAStYPenFdinITg
n
Pate
NEW
able
Coaxial C
IEC 60974-7
1
2b
1a
1b
2a
26
1c
3
7
8
4
5
5
6
9
3b
27
3a
10
1a
10
1b
1c
11
12
12
12
12
11
4
5
23
13
17
19
24
14
15
25
16
22
20
6
22a
21
Standard Layout
Hand Torch
Machine Torch
12
18
21
TEC.MO.® srl is in no way affiliated with TRAFIMET®. The parts advertised for sale are not genuine TRAFIMET® parts, but are parts made for and by TEC.MO.®
10
srl. Reference to TRAFIMET® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine TRAFIMET® parts
in place of TEC.MO.® srl parts.
plasma cutting torches
2010-03-A-LTE-RPT
LTE101H
TE-101H
LTE101M
TE-101M
Replacement Parts Suitable for: TRAFIMET® A90 - Ergocut 101
Torch parts
Item#
1
1a
1b
1c
2a
2b
3
3a
3b
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
22a
23
24
25
26
27
Accessories
ref.
EA 0131
BX 0020
Catalog #
06001E
06000.60
60085
06004
07301.20
09605.42
06600E
06600
03310
PR 0101
PE 0101
PD 0101-11
PD 0101-14
PD 0101-17
52535
60030
51154
51155
51156
06005
52538
51159
51159.14
51159.17
PC 0109/0111 60376
PC 0113/0130 60386
PC 0113/0130 60386/V
CV 0023
51940
CV 0039
51945
51952
51911
51950
51951
CV 0008
51957
CV 0009
51958
51959
60380
60381
CV 0011
51910
CV 0012
60370
CV 0014
60371
GR 60
60369
60368
51851
51807
TEC.MO.® s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Description
LTE-101H Hand torch head EASY FIT, w/ handle & parts.
O - Ring
Front insulator
Diffusor
Switch
Safety Tab
LTE-101M Machine torch head EASY FIT, w/ positioning tube & parts.
Machine torch head
Positioning Tube
Electrode
Swirl ring
Tip ø 1.1
Tip ø 1.4
Tip ø 1.7
Extended Diffusor
Extended electrode
Extended tip ( max. 50A )
Extended tip ø 1.4 - ( for 51958 + 51959 or 60380 )
Extended tip ø 1.7 - ( for 51958 + 51959 or 60380 )
Nozzle retaining cap, long life
Contact nozzle retaining cap
Contact nozzle retaining cap, Max.life
Spacer for contact cutting
Large spacer for contact cutting
Spring holder protection nut
Spacer spring for code 51952
Spacer for contact cutting, hand ( for use with item. 6 only )
Spacer for contact cutting, Machine ( for use with item. 6 only )
Shield cup, hand ( max. 50A ) ( for use with item. 21 only )
Spacer for contact cutting, hand ( for use with item. 21 only )
Locking nut
Spacer complete with springs
Spare springs
Spacer spring
Double pointed spacer
Crown spacer
Extractor for swirl ring
Wrench for electrode
Circle cutting attachment
Cutting guide
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: [email protected]
11
2010-03-A-LTE-RPT
plasma cutting torches
LTE141H
TE-141H
LTE141M
TE-141M
Suitable for: TRAFIMET® A140 - Ergocut 141
Max Current :
Duty Cycle:
Gas:
Gas Pressure:
Gas Flow:
Post Flow Time:
Pilot :
Ignition:
150Amps
150 Amps - 60%
Air
70 psi ( 4.5-5.0 bar )
470 scfh ( 220 lpm )
90 sec. recommended
Electrode to Tip
HF
EAStYPenFdinITg
n
Pate
NEW
able
Coaxial C
IEC 60974-7
1
2b
1a
1b
2a
28
1c
7
3
29
8
3b
4
5
5
3a
6
10
9
10
1a
1b
11
24
25
12
13
27
18
12
20
21
23
23a
5
6
22
12
16
17
12
1c
4
14
15
26
12
11
Standard Layout
Hand Torch
Machine Torch
19
22
TEC.MO.® srl is in no way affiliated with TRAFIMET®. The parts advertised for sale are not genuine TRAFIMET® parts, but are parts made for and by TEC.MO.®
12
srl. Reference to TRAFIMET® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine TRAFIMET® parts
in place of TEC.MO.® srl parts.
plasma cutting torches
2010-03-A-LTE-RPT
LTE141H
TE-141H
LTE141M
TE-141M
Replacement Parts Suitable for: TRAFIMET® A140 - Ergocut 141
Torch parts
Item#
1
1a
1b
1c
2a
2b
3
3a
3b
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
23a
24
25
26
27
28
29
Accessories
ref.
Catalog #
06201E
EA 0131
06000.60
60080
05004
BX 0020
07301.20
09605.42
06400E
06400
03310
PR 0101
52535
PE 0101
60030
PD 0101-11 51154
PD 0101-14 51155
PD 0101-17 51156
PD 0101-19 51157
PD 0101-30 51158
05005
52538
51159
51159.14
51159.17
51159.19
PC 0101/0102 60375
PC 0103/0131 60385
PC 0103/0131 60385/V
CV 0023
51940
CV 0039
51945
51952
51911
51953
51950
51951
CV 0008
51957
CV 0009
51958
51959
60380
60381
CV 0011
51910
CV 0012
60370
CV 0014
60371
CV 0013
60373
GR 60
60369
60368
51851
51807
TEC.MO.® s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Description
LTE-141H Hand torch head EASY FIT, w/ handle & parts.
O - Ring
Front insulator
Diffusor
Switch
Safety Tab
LTE-141M Machine torch head EASY FIT, w/ positioning tube & parts.
Machine torch head
Positioning Tube
Electrode
Swirl ring
Tip ø 1.1
Tip ø 1.4
Tip ø 1.7
Tip ø 1.9
Gouging tip ø 3.0
Extended Diffusor
Extended electrode
Extended tip ( max. 50A )
Extended tip ø 1.4 - ( for 51958 + 51959 or 60380 )
Extended tip ø 1.7 - ( for 51958 + 51959 or 60380 )
Extended tip ø 1.9 - ( for 51958 + 51959 or 60380 )
Nozzle retaining cap, long life
Contact nozzle retaining cap
Contact nozzle retaining cap, Max.life
Spacer for contact cutting
Large spacer for contact cutting
Spring holder protection nut
Spacer spring for code 51952
Gouging spacer
Spacer for contact cutting, hand ( for use with item. 6 only )
Spacer for contact cutting, Machine ( for use with item. 6 only )
Shield cup, hand ( max. 50A ) ( for use with item. 21 only )
Spacer for contact cutting, hand ( for use with item. 21 only )
Locking nut
Spacer complete with springs
Spare springs
Spacer spring
Double pointed spacer
Crown spacer
Gouging spacer
Extractor for swirl ring
Wrench for electrode
Circle cutting attachment
Cutting guide
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: [email protected]
13
2010-03-A-LTE-RPT
plasma cutting torches
LTE151H
TE-151H
LTE151M
TE-151M
Suitable for: TRAFIMET® R145 - Ergocut A151
Max Current :
Duty Cycle:
Gas:
Gas Pressure:
Gas Flow:
Post Flow Time:
Pilot :
Ignition:
150Amps
150 Amps - 60%
Air
70 psi ( 4.5-5.0 bar )
470 scfh ( 220 lpm )
90 sec. recommended
Electrode to Tip
HF
EAStYPenFdinITg
n
Pate
NEW
able
Coaxial C
IEC 60974-7
1
2a
2b
1a
Standard Layout
Hand Torch
Machine Torch
1b
3
3b
3a
1c
7
8
4
1a
5
1b
5
1c
6
9
10
4
5
6
11
14
12
15
14
14
18
20
16
13
17
14
22
21
14
19
11
22
TEC.MO.® srl is in no way affiliated with TRAFIMET®. The parts advertised for sale are not genuine TRAFIMET® parts, but are parts made for and by TEC.MO.®
14
srl. Reference to TRAFIMET® machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine TRAFIMET® parts
in place of TEC.MO.® srl parts.
2010-03-A-LTE-RPT
plasma cutting torches
LTE151H
TE-151H
LTE151M
TE-151M
Replacement Parts Suitable for: R145 - Ergocut A151
Torch parts
Item#
ref.
1
Catalog # Description
06901E
LTE-151H Hand torch head EASY FIT, w/ handle & parts.
06000.60
O - Ring
1b
60080
Front insulator
1c
05004
Diffusor
07301.20
Switch
2b
09605.42
Safety Tab
3
06910E
LTE-151M Machine torch head EASY FIT, w/ positioning tube & parts.
3a
06910
Machine torch head
3b
03310
Positioning Tube
1a
2a
EA 0131
BX 0020
4
PR 0111
52534
Electrode
5
PE 0103
60031
Insulating spacer
6
PD 0109-14
51241
Tip ø 1.4
PD 0109-16
51242
Tip ø 1.6
PD 0109-18
51243
Tip ø 1.8
PD 0109-30
51244
Gouging tip ø 3.0
05005
Extended Diffusor
7
8
PR 0116
52530
Extended electrode
9
PD 0111
51149
Extended tip ø 1.2 ( max 50A )
10
PD 0117-14
51149.14
Extended tip ø 1.4 - ( for use with item. 25+26 )
PD 0117-17
51149.17
Extended tip ø 1.7 - ( for use with item. 25+26 )
PD 0117-19
51149.19
Extended tip ø 1.9 - ( for use with item. 25+26 )
11
PC 0120
60387
Nozzle retaining cap
12
BW 0139
60388
Nozzle shield
13
CV 1105
60379
Cage spacer
14
PC 0103/0131 60385
Contact nozzle retaining cap
PC 0103/0131 60385/V
Contact nozzle retaining cap, Max.life
15
51952
Spring holder protection nut
16
51911
Spacer spring for code 51952
17
51953
Gouging spacer
18
51950
Spacer for contact cutting, hand
19
51951
Spacer for contact cutting, Machine ( for use with item. 6 only )
( for use with item. 6 only )
20
CV 0008
51957
Shield cup, hand ( tip max. 50A ) (for use with item. 26 only )
21
CV 0009
51958
Spacer for contact cutting, hand (for use with item. 26 only )
51959
Locking nut
51851
Circle cutting attachment
51807
Cutting guide
22
Accessories
TEC.MO.® s.r.l.
Via Rio Fabbiani 8
40067 RASTIGNANO (BO) ITALY
Tel. 051 - 743.123 / Fax 051 - 743.758
Website: http://WWW.tecmo.it
E-mail: [email protected]
15