Imatch DT200 Operating instructions

Imatch DT200
Operating instructions
DVB-T MODULE
Legal Notice
This guide is copyrighted © 2012 by iCar-Tech Inc.
All rights reserved.
Under copright laws, this guide may not be reproduced neither completely or in parts
without written consent of iCar-Tech Inc.
iCar-Tech, the iCar-Tech-Logo, iMatch and the iMatch-Logo are trademarks or registered
trademarks of iCar-Tech Inc.
All other trademarks contained herein are the property of their respective owners.
Product features, specifications, sysrem requirements and availability are subject to change
without notice.
Documentation Feedback
We are constantly working to improve our documentation. Should you have comments,
corrections or suggestions about our Documentation, please send us an email to
[email protected]
Contents
1. Introduce.............................................................................................3
1.1 Features............................................................................................................................3
1.2 Remote Panel...................................................................................................................4
2. Search Channel..................................................................................5
2.1 Country Setting.................................................................................................................5
2.2 Automatic Search..............................................................................................................6
2.3 Manual Search..................................................................................................................6
2.4 Reset Default....................................................................................................................7
2.5 Search shortcut way..........................................................................................................7
3. Basic Operation...................................................................................7
3.1 Switching Channel............................................................................................................7
3.2 Volume control..................................................................................................................8
3.3 Program Information.........................................................................................................8
3.4 Subtitle..............................................................................................................................8
4. EPG (Electric Program Guide)............................................................9
4.1 Program Guide Information...............................................................................................9
5. TTXT(Teletext)....................................................................................9
6. Preferences setting...........................................................................10
6.1 Language setting.............................................................................................................10
6.2 A/V Control......................................................................................................................10
6.3 Personal Style.................................................................................................................10
7. System Setting.................................................................................. 11
7.1 Display System Situation................................................................................................ 11
7.2 Display signal status....................................................................................................... 11
8. Channels List.................................................................................... 11
8.1 edit channels................................................................................................................... 11
8.2 Edit Favorite Channels List.............................................................................................12
8.3 Operation favorite channel list........................................................................................12
8.4 TV/RADIO Switch............................................................................................................12
9. Menu Map.........................................................................................13
10. Trouble Shooting.............................................................................14
EN - 1
DVB-T
Guide
u Welcome to the wonderful world of mobile TV using mobile TV
features, you can signal coverage within the scope of mobile TV
signals from the suppliers to provide the best television programs,
real-time understanding of external information, in the process of
moving access to the spirit of joy ;
u When you want to use mobile TV features, the manual will provide
you with useful information;
u Please read carefully the “Guide” instructions and instructions and
use only the original accessories, can not be expected to avoid
the damage. If you do not follow the correct procedure to use the
system or connect incompatible accessories, such acts would
lead to automatic failure warranty, and you may even endanger
the safety of others. In response, the Company assumes no
responsibility;
u TV screen depends on the clarity of television signals in the strong
or weak, no programme for the fuzzy images or images to transfer
to open or use an external antenna, if it still can not receive, please
contact the local TV signal providers and distributors;
u Not to the module on the temperature is too high or too wet;
u Function due to the increase or change and improve the
performance of the manual version, without notice;
u The “Guide” in the picture for reference purposes only, are subject;
u I reserved to the “Guide” the ultimate power of interpretation.
EN - 2
1. Introduce
This DVB-T module is fully compliant with the international DVB
standard and thus transmits digital images, sounds and information
guides directly to your TV through the terrestrial broadcasting. Now
you can comfortably see and receive digitally transmitted music, news,
movie and sports terrestrial broadcasts in your office on at your home.
In the Channel Search section, both the automatic channel search
method and the manual Search mode are provided. The Menu is very
modern and supports different languages. All functions can be carried
out using the TSP, touch screen panel, and some of the functions can
also be carried out using the front panel.. The slim module is easy to
use and adaptable for future advances. Please be aware that new
software may change the functions of the slim module.
1.1 Features
Auto/Manual search
Supports multinational Language
Channel manager
Auto save channel
Supports high speed mobility
Strong to noise/good sensitivity
Compliant with full DVB-T standards
Audio output supports Stereo Audio R/L
Supports EPG,Teletext,Subbtitle
Video output supportsCVBS
EN - 3
1.2 Remote Panel
19
1
18
17
2
16
3
15
14
4
13
5
12
6
11
7
8
10
9
1. POWER: Power ON/OFF
2. TV/RADIO: Television and Broadcast
switch function key (Note: The broadcast
features rely on the existence of local
broadcast signals).
3. FAV: Into or exit you favorite TV program
list, With channel increase / decrease
switch to achieve.
4. RIGHT: Increased volume, the menu
operation in the right move the cursor.
5. DOWN:Channel reduced, the menu
operation in the down move the cursor.
6. INFO: TV program information browse.
7. CANCEL: Exit menu.
8. AUDIO: LEFT/RIGHT/ Stereo channel
switch.
9. SCAN: Scan Channels.
10.0-9:Number Keys: Number butter search
or characters input .
11.MENU: Into/exit main menu operation.
12.EPG: The Program Guide displays
program information about each channel,
based on the date and time.
13.OK: In the operation of the selected menu
features confirmed .
14.LEFT: Reduced volume, the menu
operation in the left move the cursor.
15.U P : C h a n n e l i n c r e a s e , t h e m e n u
operation in the up move the cursor.
16.SUB: TV Subtitle function set .
17.TTXT: Into or exit Teletext TV Program.
18.KEY COLOR: Point out that the key
according to corresponding colour
realizes corresponding controlling
according to the screen.
19.MUTE: Sound ON/OFF
EN - 4
2. Search Channel
If your slim module is connected to the aerial and
television, you can automatically search channels
without entering any other information. it is
because no channel storage search, you can set
up search mode and the country.
Remark:
a) Press the MENU button to enter the main
menu interface, a four-screen icon, that
were Installation, System, Channel list and
Preferences, press the or button to choose
the icon, to be elected
The icon was to enlarge highlighted (Figure
2.2 show). We selected to install icon and
press the OK button to enter the installation
menu, the installation menu can be set into the
country and search, it provides two channels
of the search method: automatic and manual
channel search channels.(Figure 2.3 show)
b) Press the / OK button to select next menu,
press the CANCEL button return the main
menu, press the CANCEL button to exit the
menu interface.
c) Used the / button to select menu items
from top to bottom. press OK button to confirm
the current operation.
Figure 2.1
Figure 2.2
2.1 Country Setting
You can set the country for Menu. Default country
is England.
1. Enter to the installation menu.
button to display the
2. Press the OK /
available Country List.
/
3. Select your desired country using the
button, and press the OK button to confirm
(Figure 2.4show)
Figure 2.3
Figure 2.4
EN - 5
2.2 Automatic Search
a) Use the
/
button to select automatic
search and press the OK button, Into the
automatic search interface, Wait while the
receiver searches for the channels, this may
take a few minutes.( Figure 2.5 show)
b) In automatic search period, the progress
instructed that the strip will have the search
progress indication, in search period, if will
press the OK button operation to pause,
press the / button to select Save button
and exit.
Figure 2.5
c) If search operation is successfully completed,
and the channel does not exist, press the
CANCEL button to select Exit and try to reset
the search operation again if necessary.
d) The auto search will complete the program which the automatic demonstration
will search in the left side program tabulation, please choose save and exit
menu.
2.3 Manual Search
a) Press the OK button and use / button to
select Manual Search, enter manual search
interface.
b) You can use / button to select channel
and frequency ,press the OK button to enter,
you can using / button to change channel
and frequency.
c) Use the / button to select search button,
press the OK button to search.
d) When completing Channel Search, press the
OK button can automatic to save the changes
and display program.
Figure 2.6
Remark
• Please wait for finishing the Channel Search. If you want to stop the Channel
Search, press the OK button. If the Channel Search is stopped or finished,
the result of Channel Search is automatic saved and display the channels
program.
• If search operation is successfully completed, and the channel does not exist,
press the OK button and try to reset the search operation again if necessary.
When completing Channel Search, the Channels automatic save to changes.
You can easily set-up using simple organization and options, and watch the
broadcasting after completing the set-up procedure.
• Press the CANCEL button to save the previous input information and exit
EN - 6
the installation wizard when running the installation wizard. If you exit the
install wizard without fully completing the setting procedures, you may not
watch any broadcasting normally. In this case, you can use the Installation
Menu to configure your receiver as you like.
2.4 Reset Default
1. Enter the installation menu
2. Press / button to select resest default,
and press the OK button to confirm
/
button to select yes , and
3. Using the
press the OK button to confirm, Select OK to
restore all setting to Factory Default. Select
CANCEL to return to System.
4. Reset default menu of restore all setting to
Factory Default, please note you to restore a
time default all data to be able to delete, for
example: Channel, menu, installation and so
on.
Figure 2.7
2.5 Search shortcut way
a) The first press search channel shortcut into
the Language Interface, press / and OK
button to select Language menu.(Figure 2.8
show )
b) The second press search channel shortcut
into the country Interface, press / and OK
button to confirm search country.(Figure 2.4
show )
c) The third press search channel shortcut reset
t Interface, press OK / CANCEL button to into
automatic interface and search channel. The
back of the parade with the above-mentioned.
(Figure 2.6 show)
Figure 2.8
3. Basic Operation
This chapter describes functions such as switching channel, volume control, and
basic features for watching programs.
3.1 Switching Channel
• Pressing the / button may transform to
the neighboring channel on panel
• Using panel’s numeric keyboard to be
possible to cut directly to the channel which
likes (Figure 3.1 show)
EN - 7
Figure 3.1
• You can switch channel using the channel list or program guide.
3.2 Volume control
Press the
button to high volume, pressing the
button to low volume.
3.3 Program Information
You can view the program information by press
the INFO button while watching a program.
Press the CANCEL button to hide the I-plate,
Information on the menu shows the current
channel number and name, the current time,
signal strength & signal quality and the current
frequency; You can see detailed information
about the current program. Press the INFO
button where I-plate is displayed to view detailed
information. (Figure 3.3 show)
Figure 3.3
3.4 Subtitle
You can select the language for the subtitle if the program provides subtitle
information.
a) Press the SUB button.
b) Select the required subtitle language with / button and press the OK
button. (Figure 3.4 show).
c) The subtitle will be displayed in the selected language. (Figure 3.5 show)
d) In the subtitle off the menu choices are not shown subtitles.
e) Repeat pressing the SUB / CANCEL button
to hide the subtitles.
Figure 3.4
Figure 3.5
EN - 8
4. EPG (Electric Program Guide)
The Program Guide displays program information
about each channel, based on the date and time.
(Figure 4.1show)
Remark:
Press the EPG button to into the program menu
pages, press the CANCEL button to exit, Some
local program providers do not provide services
in this area, may lead to the menu can not be
used.
Figure 4.1
4.1 Program Guide Information
You can view program information for all channels.
a) Press the EPG button to into the program guide information pages. Press the
Red button to switch channels, dates and program column window.
b) Move to previous or next program within the same channel use / button.
c) Move to another desired channel use / button.
d) Select your desired program, and press the OK button. Then you can watch
the program if it is on air, or you can reserve it if it is the future program.
e) Press the INFO button in the selected program to view detailed Information
for the selected program.
5. TTXT(Teletext)
The Program Guide displays program information about each channel, based on
the date ,time and the channel information.
Remark:
Press the TTXT button display, and press TTXT
/ CANCEL button to exit the teletext information;
Local operators do not provide by television
program, press the TTXT button Will display No
availavle picture, repeat press the TTXT button
to hide the screen. Use / button to look the
teletext content.( Figure 5.1 show)
Figure 5.1
EN - 9
6. Preferences setting
Remark:
a) You can set Parental Control/ the language for Menu/Audio/other, Default
language is English.
b) Pressing the MENU button to enter the main menu.
c) Pressing the button to select preferences setting, using the button to
enter preferences setting.
6.1 Language setting
a) Press the / button to select Language setting. ( Figure 6.1 show)
b) Press the MENU / button to display the available Language List. ( Figure 6.2
show)
c) Press the button that language choice needs, use the OK button to confirm
and exit
Figure 6.1
Figure 6.2
6.2 A/V Control
a) Press MENU button to select preferences.
/
button to select A/V control,
b) Use the
press the OK button to display option.
c) Use the / button to select ,then you can
change Video output/Screen Ratio/Display
format, press the OK button to confirm, press
the CANCEL button to exit. ( Figure 6.3
show)
Figure 6.3
6.3 Personal Style
a) Press MENU button to select preferences;
b) Use the / button to select other setting,
press the OK to display option;
/
button to set OSD
c) U s e t h e
demonstrating time , menu transparency
and colour, press the OK to revise, press the
CANCEL to exit. (Figure 6.4 show)
Figure 6.4
EN - 10
7. System Setting
Remark:
a) You can see the situation and signal status;
b) Press the MENU button to enter the main
menu interface;
c) Press the button to select system menu,
press the button to enter menu.(Figure 7.1
show)
7.1 Display System Situation
a) Enter the system parameter menu; press the
/ button to select system menu, press the
OK button to enter system menu.
/
button to select system
b) Press the
situation menu;
c) Press the OK button to confirm,, The screen
will display the current system status(Figure
7.2 show)
Figure 7.1
7.2 Display signal status
a) In the menu system used the / button to
select signal status menu;
b) Press the OK button to Into the signal status
display menu
c) The first line shows the signal strength, and
the second line shows the signal quality of
the state.(Figure 7.3 show)
8. Channels List
Remark:
a) Channel list menu can be set up and edit
channels like Channel;
b) Select channel list icon, press the OK button
to display the interface, (Figure 8.1 show);
Figure 7.2
Figure 7.3
8.1 edit channels
a) Into the channel menu list;
b) Press the / button to select edit menu
Figure 8.1
EN - 11
channel, using the OK button to into the edit
interface channel(Figure 8.2 show).
c) Red button is locked, is the key to unlock the
green, yellow button is removed, the blue
button is editing, The panel button to lock the
corresponding colors / unlock / Delete / editor,
and other functions;
8.2 Edit Favorite Channels List
a) Enter the favorite channels list menu;
b) Press the / button to Select the favorite
channels menu, use the OK button to into the
favorite interface channel(Figure 8.3 show)
c) Then you can edit your favorite channels list,
use / button to select channels,press red
button to add the channels into favorite list.
You can use green button to sort channels.
you can use / button select channels, and
press blue button to remove the channels.
d) Use the / button to select TV or favorite
list, Press CANCEL to exit.
Figure 8.2
Figure 8.3
8.3 Operation favorite channel list
When you have added some channels to Favorite
list, then exit press Menu and OK button Press
/
button change to RADIO/TV or favorite
channels list, In the list of favorite programs and
TV channels in the list, using / button and
OK button change to channel. (Figure 8.4 show)
8.4 TV/RADIO Switch
Figure 8.4
When display DVB-T, After press the OK button
can see the TV channel list, press TV/RADIO
button switch to broadcast mode. In this state of
the TV/RADIO button in the TV or switch back
and forth between RADIO mode.
Figure 8.5
EN - 12
9. Menu Map
Country setting
Your country
Installation
System
Channel List
Preferences
ENGLAND,GERM
ANY,FRANCE,IT
ALY,SPAIN,TURK
EY,PORTUGAL,G
REECE,RUSSIA
,CZECHREP,TAI
WAN,CHINA,HOL
AND,AUSTRALIA
Automatic Search
Manual Search
Reset Default
OK Cancel
System Status
Signal Status
Edit Channels
Favorite Channels
Menu Language
Language Setting Audio Language
Subtitle Language
TV Type
NTSC/PAL
Video Output
Stereo/Mono
A/V Control
Screen Ratio
4:3/16:9
Auto/ Letter Box/
Display Format
Center Mode
Display Time
1/3/5/10/15/20/
Personal Style
OSD transparency Disable/25/50/75
Palatte
EN - 13
10. Trouble Shooting
If the product does not work normally after completing the following trouble
shooting, please contact your local product distributor or service centre.
Error message
No or bad signal
The channel is
scrambled or not
available.
The channel is
scrambled.
The audio is not
available.
The antenna cable is
short-circuited.
Possible causes
What to do
The aerial is not pointing Adjust aerial.
properly.
Check the cable from
the aerial. If you cannot
resolve the problem you
may need to have your
aerial and installation
tested by a professional.
The channel has signal, Confirm if the channel is
but no audio or video.
currently on air.
The channel is not
deleted by broadcasting
company.
The channel is for data Cannot watch the
broadcasting.
channel in usual way.
This digital terrestrial
receiver does not
support the service that
enables to
descramble the
scrambled channels.
The channel has signal, Press the RED button to
but no Audio.
confirm if the
channel has Audio.
Antenna cable is
Replace antenna.
shorten.
Remove the alien
Antenna is internally
substance and contact
shorten.
local service center if it
Antenna in port is
is damaged.
inserted by alien
substance or damaged.
Note:
Specifications and the design are subject to change without notice due to
improvements.
EN - 14