Backhoe Front End Loader

Transcription

Backhoe Front End Loader
EU_DS4110-4510_C(09.08)2009.8.2511:45AM페이지1
DS4110 / DS4510
KIOTI VALUE TRACTOR
Backhoe
The subframe-mounted KB2485 backhoe can be easily
attached and detached using locking pins and quickconnect hydraulics. The Backhoe’s offset subframe design
provides a large approach angle for the easiest trailer
loading in its class.
Backhoe Model : KB2485 Tractor Model : DS4510
Front End Loader
The KIOTI KL4510 loader is specifically designed for the
DS series tractors, providing efficient performance with
single joystick control. The KIOTI loader is designed to be
quickly and easily attached and detached.
Backhoe Specifications
KB2485
Loader Specifications
KL4510
A Maximum lift height to pivot pin
2,690 mm
105.9 "
B Maximum lift height under level bucket
2,400 mm
94.5 "
C Clearance with bucket dumped
1,857 mm
73.1 "
D Reach at maximum lift height
201 mm
7.9 "
E Maximum dump angle
58.0 °
58.0 °
A
B
C
D
E
F
G
H
I
J
K
Digging Depth (two foot flat bottom)
Reach from center line of Swing Pivot
Loading Height (bucket at 60°)
Maximum Leveling Angle
Swing Arc
Transport Height (maximum)
Transport Overhang
Bucket Rotation
Stabilizer Spread (down position)
Stabilizer Spread (up position)
Angle of Departure
Shipping Weight (without bucket)
Bucket Digging Force
Dipperstick Digging Force
Operating Pressure
2,400 mm
3,460mm
2,040mm
10°
180°
2,360mm
1,280mm
180°
1,745mm
1,180mm
21°
500Kg
1700Kg
1000Kg
170bar
94.4”
136.1”
80.3”
10°
180°
92.9”
50.4”
180°
68.7”
46.4”
21°
1,102lbs
3,748lbs
2,205lbs
2,466psi
F Reach with bucket on ground
1,939 mm
76.3 "
G Maximum rollback angle
48.0 °
48.0 °
H Digging depth
210 mm
8.3 "
Cylinder
Bore DIA
Stroke
Rod DIA
mm (inch)
mm (inch)
mm (inch)
mm (inch)
Boom
Bucket
Dipperstick
Swing
Stabilizer
70 (2.75)
60 (2.36)
70 (2.75)
60 (2.36)
60 (2.36)
636 (25.04)
630 (24.80)
708 (27.87)
398 (15.67)
446 (17.56)
386 (15.20)
395 (15.55)
505 (19.88)
223 (8.78)
262 (10.31)
40 (1.57)
35 (1.38)
40 (1.57)
35 (1.38)
35 (1.38)
J Overall height in carry position
1,648 mm
64.9 "
L Bucket depth
584 mm
23.0 "
M Bucket height
563 mm
22.2 "
N Bucket length
798 mm
31.4 "
Lift capacity to maximum height-at pivot pin
1,450 Kgf
3,198 lbs
Breakout force-at pivot pin
2,073 Kgf
4,570 lbs
Bucket width
1,702 mm
67.0 "
Boom cylinder
35x60x700x480ST mm
1.38x2.36x27.56x18.90ST "
Bucket cylinder
35x60x998x332ST mm
1.38x2.36x39.29x13.07ST "
Cylinders
Retracted Length
Buckets
Bucket
Teeth Q'TY
Struck Capacity
Heaped Capacity
Shipping Weight
9” Bucket
12” Bucket
16” Bucket
18” Bucket
24” Bucket
36” Bucket
3
3
3
4
5
6
0.73 cu. ft.
1.01 cu. ft.
1.38 cu. ft.
1.56 cu. ft.
2.11 cu. ft.
2.78 cu. ft.
0.87 cu. ft.
1.24 cu. ft.
1.76 cu. ft.
2.02 cu. ft.
2.82 cu. ft.
4.00 cu. ft.
46 lbs.
56 lbs
64 lbs
70 lbs
94 lbs
114 lbs
EU_DS4110-4510_C(09.08)2009.8.2511:45AM페이지2
ISO 9001
NO:954596
ISO 14001
NO:771475
OHSAS 18001
NO:K033008
Specifications
MODEL
DS4110
Standard Equipment
DS4510
ENGINE
�Single Remote Hyd. Valve
Model
Type
Engine Horsepower
Displacement
Rated revolution
Fuel tank
HP
cc
rpm
ℓ
4A200LWE
4A220LWE
4cyl., In-line Vertical, Water Cooled, 4Cycle Diesel Engine
41
45
1,999
2,197
2,600
42
mm
Dry single stage
Mechanical
260
CLUTCH
Type
Method of operation
Clutch size
�Parking brake (side)
�Foldable ROPS with Seat Belt
�Horn
�Head Lamp
�7 pin socket
�Rear View Mirror
�Draw bar (clevis)
Optional Equipment
TRANSMISSION
Type
Travel Speeds
-Forward
-Reverse
Diff. Lock
Brake
Constant Mesh
8 Forward, 8 Reverse
2.0-26.6
1.8-24.0
Rear (standard)
Wet multi disc type
km/h
�2nd Remote Hyd. Valve
�Front Suitcase Weights
�Rear Wheel Weights
�Working Lamp
�Beacon
POWER TAKE-OFF
Type
PTO revolution
Hydraulic, Independent
540
rpm
3-POINT HITCH
Type
Lift Capacity at lift point
Drawbar
Top Link
Lower Link
Category 1
1,100 (max)
Standard (Clevis)
Turn buckle
Ball
kg
HYDRAULICS
ℓ /min
Pump Capacity
3-pt. Hitch control
No. of standard remote valves
Steering
49.9
Position Control
1EA
Hydrostatic Power Steering
STANDARD TIRES
Front
Rear
8 - 16
13.6 - 24
DIMENSIONS
mm
mm
mm
mm
mm
m
kg
3,168
1,574
2,521
1,850
348
3
1,600
Kioti Tractor/
Daedong Industrial. Co., Ltd.
1422-5, Seocho-Dong, Seocho-Ku, Seoul, Korea
tel 82-2-3470-7454~9�fax 82-2-3470-7485
web www.daedong.co.kr
3,168
1,574
2,521
1,850
348
3
1,605
Dealer Imprint Area
Kioti Tractor / Daedong Ind. Co., Ltd. / EU_DS4110-4510(C)_0908
Overall length (including 3-pt hitch)
Overall width(minimum tread)
Overall height(from top of ROPS)
Wheelbase
Min. ground clearance
Min. turning radius(with brake)
Weight with ROPS and tires
EU_DS4110-4510_C(09.08)2009.8.2511:45AM페이지3
KIOTI VALUE TRACTOR
DS4110/ DS4510
EU_DS4110-4510_C(09.08)2009.8.2511:45AM페이지4
KIOTI
Value Tractor
Exceptional quality and
features in the DS series tractors
Keep you
ahead of the pack
�The implements in the photo are for your reference only.
Environmentally Friendly Engine
Air Filter
Shuttle Lever
The Daedong engine complies with EEC
Stage IIIA standards with low emission and
proven performance and durability.
The easily accessible air filter cartridge
protects the engine from harmful particles
and prolongs the life of the engine.
The DS series shuttle lever provides easy
back and forth operation as well as faster
reverse speeds. The shuttle lever makes
loader operation easier for the operator.
EU_DS4110-4510_C(09.08)2009.8.2511:45AM페이지5
Easy Open Hood
The maintenance friendly design enables you to do easier service
for fuel filter, fuel system, engine oil filter, fill the oil and even
change the air filter from the right side of the hood.
High capacity Hydraulic Pump
High capacity hydraulic pump
enables to perform
multiple functions with
either the backhoe or
loader with power to
spare.
Tractor Model : DS4510
Innovative Design
The slanted hood design on
the DS series tractors
ensures the best visibility
in its class as well as
creating an attractive,
sleek profile.
�Some features
will be adjusted
according to EU
standard.
EU_DS4110-4510_C(09.08)2009.8.2511:45AM페이지6
KIOTI VALUE TRACTOR
DS4110 / DS4510
Independent PTO
Front Axle
The electro-hydraulic PTO clutch allows you to turn the PTO ON and OFF with just a simple
flip of a switch. A safety start switch prevents starting the tractor while the PTO is engaged.
A field proven front axle design ensures
durability and strength for loader operations.
Lift Capacity
Power Steering
With a lift of 1,100kg, the DS series Cat. I
3 point hitch has power to spare when
carrying large implements, such as brush
cutters, mowers and blades.
Responsive, powerful and comfortable
steering reduces operator's fatigue.
The power steering system is robustly
designed for maneuvering in soft soil
and for front loader operation.
Foldable ROPS
Heavy Duty Transmission
A fold-down roll bar makes it quick and easy
to move in low clearance areas.
The heavy duty design of the DS series
transmission adds strength to the tractor
chassis and provides excellent draw bar pull.
DS Series
The DS series tractors are ready for
any job that demands a durable
tractor. An efficient engine,
powerful lift capacity, convenient
shuttle transmission, and sleek
design makes the DS series
tractor a great value.
�Some features will be adjusted
according to EU standard.