American V-Twin Catalogue

Transcription

2013 American V-Twin Catalog
0.050
Replacement Valves
Valve Guides
Valve Spring Kits
Valve Seat I nserts
Valve Seals
Comp. Release Valves
Valve Guides Reamers
-It always pays to buy the best-
Part #: AV&V
157°
WELCOME
4.590
Curiosity is the mother of creativity.
167°
0.130 (45 deg.)
AV&V is and always has been a pioneer when
it comes to technological innovations for the
Harley-Davidson cylinder head components.
Systematic and advanced development is part
valvetrain components .
0.100
17 valve guide models and 14 different valve
R0.150
HANFER
High Flow Valves
R0.600
0.236
line of High Performance valvetrain components in
the industry.
0.3108 `0.0002
0.265
.0
AV&V Black Tulip & Chrome tulip Extreme Duty valves
These superb valves feature the highest flow level on the
market. They are one piece forged from a racing grade stainless
steel alloy.
Each valve has a bearing quality hardened tip at the end of the
stem to prevent premature wear with high-lift applications.
AV&V's 5/16 stem valves also features a 45o angle below the
lock groove to facilitate the valve seal installation.
Each valve is heat treated with a special process and the stem
is centerless grinded to a micro finish for a longer life.
Evolution Big Twin & Twin Cam (5/16 stem)
Part No.
Type
Head Dia.
Overall Lenght
Stem Dia.
Coating
Note
AV1570
Exhaust
1.570"
4.520"
.3106"
Black
-
AV1610D
Exhaust
1.610"
4.510"
.3106"
Black
-
AV1610S
Exhaust
1.610"
4.565"
.3106"
Black
For S&S heads
Overs. valve for Jims 120 & SE 110 heads
AV1650
Exhaust
1.650"
4.510"
.3106"
Black
AV1700C
Exhaust
1.700"
4.470"
.3106"
Chrome
For Merch heads
AV1700A
Exhaust
1.700"
4.535"
.3106"
Black
.250" tip (Hardened tip can be grinded to shorten valve)
AV1700U
Exhaust
1.700"
4.635"
.3106"
Black
For ULTIMA heads
AV1813
Intake
1.812''
4.485''
.3108''
Chrome
For Buell heads
HD11
Intake
1.845"
4.458"
.3108"
Black
(Also good for stock replacement)
AV1900
Intake
1.900"
4.440"
.3108"
Black
-
AV1900S
Intake
1.900"
4.415"
.3108"
Black
.025" shorter
AV1940
Intake
1.940"
4.440"
.3108"
Black
-
AV1990
Intake
1.990"
4.440"
.3108"
Black
-
AV2020A
Intake
2.020"
4.440"
.3108"
Black
For Merch heads or other
AV2020
Intake
2.020"
4.490"
.3108"
Black
.050" longer
AV2020S
Intake
2.020"
4.480"
.3108"
Black
For S&S heads
AV2060LC
Intake
2.060"
4.510"
.3108"
Chrome
Overs. valve for S&S heads
AV2100
Intake
2.100"
4.475"
.3108"
Black
Overs. valve for Jims 120& SE 110 heads
AV2100U
Intake
2.100"
4.590"
.3108"
Black
For ULTIMA heads
AV2150
Intake
2.150"
4.480"
.3108"
Chrome
Overs. valve for Jims 120 / 131 heads
Twin Cam (7MM stem, Triple Groove)
Part No.
Type
Head Dia.
Overall Lenght
Stem Dia.
Coating
AV1575-7TGB
Exhaust
1.575"
4.560"
.2755"
Black
Note
-
AV1575-7TGC
Exhaust
1.575"
4.560"
.2755"
Chrome
-
AV1610-7TGB
Exhaust
1.610"
4.555"
.2755"
Black
.035" overs. valve
AV1610-7TGC
Exhaust
1.610"
4.555"
.2755"
Chrome
.035" overs. valve
AV1810-7TGB
Intake
1.810"
4.455"
.2757"
Black
-
AV1810-7TGC
Intake
1.810"
4.455"
.2757"
Chrome
-
AV1850-7TGB
Intake
1.850"
4.455"
.2757"
Black
.040" overs. valve
AV1850-7TGC
Intake
1.850"
4.455"
.2757"
Chrome
.040" overs. valve
AV1900-7TGB
Intake
1.900"
4.455"
.2757"
Black
.090 "overs. valve
AV1900-7TGC
Intake
1.900"
4.455"
.2757"
Chrome
.090" overs. valve
AV1980-7TGB
Intake
1.980"
4.455"
.2757"
Black
.170" overs. valve
2
Sportster 1200 & Buell (5/16 stem)
Part No.
Type
Head Dia.
Overall Lenght
Stem Dia.
Coating
Note
AV1485
Exhaust
1.485"
4.560"
.3106"
Black
Also good for stock replacement
AV1580
Exhaust
1.580''
4.575''
.3106''
Chrome
For Buell heads
AV1720B
Intake
1.720"
4.480"
.3108"
Black
Also good for stock replacement
AV1770
Intake
1.770"
4.480"
.3108"
Black
Overs. valve
AV1813
Intake
1.812''
4.485''
.3108''
Chrome
For Buell heads
AV1851
Intake
1.851''
4.485''
.3108''
Chrome
Oversized valve for Buell heads
Sportster 1200 & Buell XB9 / XB12 (7mm stem)
Head Dia.
Overall Lenght
Stem Dia.
Coating
Note
AV1576-7TGB Exhaust
1.575"
4.620"
7mm
Black
Also good for stock replacement, triple groove valve
AV1811-7TGB Intake
1.810"
4.480"
7mm
Black
Also good for stock replacement, triple groove valve
AV1851-7TGB Intake
1.851"
4.520"
7mm
Black
Overs. valve, triple groove valve
Part No.
Type
Sportster 883 to 1200 Conversion (5/16 stem)
Part No.
Type
Head Dia.
Overall Lenght
Stem Dia.
Coating
Note
AV1480
Exhaust
1.480"
4.640"
.3106"
Black
Seats must be machined deeper and their I.D.
AV1720
Intake
1.720"
4.560"
.3108"
Black
must be enlarged to accept these valves.
V-Rod
Part No.
Type
Head Dia.
Overall Lenght
Stem Dia.
Coating
Note
AV34-6TGC
Exhaust
34.4MM
116.9MM
.2346"
Chrome
Triple groove valve
AV35-6TGC
Exhaust
35.4MM
116.9MM
.2346"
Chrome
Triple groove valve
AV40-6TGC
Intake
40MM
116.28MM
.2351"
Chrome
Triple groove valve
AV41-6TGC
Intake
41MM
116.28MM
.2351"
Chrome
Triple groove valve
35.4MM
116.9MM
.2346"
Chrome
Single groove valve(Use with AV&V R6MMSGOE-4)
41MM
116.28MM
.2351"
Chrome
Single groove valve(Use with AV&V R6MMSGOE-4)
Note
AV35-6SGC Exhaust
AV41-6SGC
Intake
Blank Valves (no tip, no groove)
Part No.
Type
Head Dia.
Overall Lenght
Stem Dia.
Coating
AV35-6B
Exhaust
35.4MM
5"
.2346"
Chrome
-
AV41-6B
Intake
41MM
5"
.2351"
Chrome
-
AV1650BC
Exhaust
1.650"
5.7"
.3106"
Chrome
-
AV1700BC
Exhaust
1.700"
5.7"
.3106"
Chrome
-
AV2100BC
Intake
2.100"
5.7"
.3108"
Chrome
-
AV2200BC
Intake
2.200"
5.7"
.3108"
Chrome
-
3
AV&V Extreme Duty Replacement valves
These superb valves are one piece forged from a racing grade
stainless steel alloy. Our liquid nitriding process creates a valve that
is smoother and stronger than traditional O.E.M. or replacement
valves.
The stems are centerless grinded to a micro finish for a longer life.
AV&V Extreme Duty valves also feature a 45 o angle below the lock
groove to facilitate the valve seal installation.
Type
Head Dia.
Overall Lenght
Stem Dia.
Coating
Model
Part No.
Exhaust
1.355"
4.635"
.3106"
Black
883 Sportster (5/16 stem)
AV1355
Intake
1.590"
4.550"
.3108"
Black
AV1590
-
-
-
-
-
-
-
Exhaust
1.562"
3.510"
.3392"
Black
900 / 1000 Ironhead Sportster
HD03
Intake
1.812"
3.600"
.3110"
Black
900 Ironhead Sportster
HD04
Intake
1.940"
3.600"
.3110"
Black
1000 Ironhead Sportster
HD05
-
-
-
-
-
-
-
Exhaust
1.485"
4.560"
.3106"
Black
AV1485
Intake
1.720"
4.480"
.3108"
Black
AV1720B
-
-
-
-
-
-
-
Exhaust
1.575''
4.620''
.2755"
Black
1200 Sportster (7mm stem)
AV1576-7TGB
Intake
1.810''
4.480''
.2757"
Black
1200 Sportster (7mm stem)
AV1811-7TGB
-
-
-
-
-
-
-
Int/Exh
1.750"
3.825"
.3765"
Black
Panhead
HD07
-
-
-
-
-
-
-
Exhaust
1.750"
3.825"
.3765"
Black
Shovel Head 1966-1984
HD07
Intake
1.940"
3.875"
.3770"
Black
Shovel Head 1966-1984
HD09
-
-
-
-
-
-
-
Exhaust
1.615"
4.525"
.3106"
Black
Evolution 1340 1984 & up
HD10
Intake
1.845"
4.455"
.3108"
Black
Evolution 1340 1984 & up
HD11
-
-
-
-
-
-
-
Exhaust
1.570"
4.525"
.3106"
Black
Twin Cam (5/16 stem)
HD12
Exhaust
1.575"
4.545"
.2755"
Black
Twin Cam (7mm stem)
AV1575-7TGB
Exhaust
1.575"
4.545"
.2755"
Chrome
Twin Cam (7mm stem)
AV1575-7TGC
Intake
1.810"
4.455"
.2757"
Black,
Twin Cam (7mm stem)
AV1810-7TGB
Intake
1.810"
4.455"
.2757"
Chrome,
Twin Cam (7mm stem)
AV1810-7TGC
Intake
1.845"
4.455"
.3108"
Black
Twin Cam (5/16 stem)
HD11
4
AV&V Extreme Duty Manganese bronze valve guides
AV&V's Manganese bronze alloy allows you to fit the valve at a
tighter clearance for better heat dissipation, longer life and quieter
engine.
Special Hi-temp. Viton O'ring to prevent oil infiltration between guide
& head.
Tapered & radiused nose for easier installation and better air flow.
Unique Super Grip valve seal section : use either OEM style or
viton seals.
CNC machined
Unfinished I.D. ready to be easily finished with AV&V's Carbide
reamers ( see reamers section)
V-Rod
Use with O.E. style valve seals
(V6MM).
Profiled for optimum airflow.
Oversize
O.D.
I.D.
Intake & Exhaust
Std.
.3955"
5.9MM
VG7000
.001"
.3965"
5.9MM
VG7001
.002"
.3975"
5.9MM
VG7002
.003"
.3985"
5.9MM
VG7003
Twin Cam, Evo & Sportster (High lift & high flow application)
Use with .530" Viton valve
seals (V312531).
Shorter seal area for high
lift application.
Profiled for optimum
airflow.
Same guides as above
except for the seal
diameter.
Use with .421" Viton valve
seals (V312421),or O.E.
style valve seals (K312420)
Oversize
O.D.
I.D.
Intake
Exhaust
Std.
.5625"
.309"
VG5600
VG5700
.001"
.5635"
.309"
VG5601
VG5701
.002"
.5645"
.309"
VG5602
VG5702
.003"
.5655"
.309"
VG5603
VG5703
.004"
.5665"
.309"
VG5604
VG5704
.005"
.5675"
.309"
VG5605
VG5705
.006"
.5685"
.309"
VG5606
VG5706
.010"
.5725"
.309"
VG5610
VG5710
.025"
.5875"
.309"
VG5625
VG5725
Oversize
O.D.
I.D.
Intake
Exhaust
Std.
.5625"
.309"
VG5600S
VG5700S
.0005''
.5630''
.309''
.001"
.5635"
.309"
VG5600-5S VG5700-5S
VG5601S
VG5701S
Twin Cam, Evo & Sportster (Stock replacement)
Oversize
O.D.
I.D.
Use with .530" O.E. style valve seals
Std.
.5625"
.309"
VG5500
.001"
.5635"
.309"
VG5501
Stock lenght
.002"
.5645"
.309"
VG5502
.003"
.5655"
.309"
VG5503
(K312530).
Intake & Exhaust
.004"
.5665"
.309"
VG5504
.025"
.5875"
.309"
VG5525
5
Twin Cam, Evo & Sportster 7MM (High lift & high flow application)
Use with O.E. style valve seals
(V7MMOE).
Oversize
O.D.
I.D.
Intake
Exhaust
Std.
.5625"
.273"
VG6600
VG6700
.001"
.5635"
.273"
VG6601
VG6701
.002"
.5645"
.273"
VG6602
VG6702
.003"
.5655"
.273"
VG6603
VG6703
.004"
.5665"
.273"
VG6604
VG6704
.010"
.5725"
.273"
VG6610
VG6710
.025"
.5875"
.273"
VG6625
VG6725
Shovel Head 1340 (1979-1984)
Use with .625" O.E. style valve
seals (K375625).
Oversize
O.D.
I.D.
Std.
.6250"
.375"
Intake & Exhaust
VG5400
.001"
.6260"
.375"
VG5401
.002"
.6270"
.375"
VG5402
.003"
.6280"
.375"
VG5403
.004"
.6290"
.375"
VG5404
.005"
.6300"
.375"
VG5405
.006"
.6310"
.375"
VG5406
.010"
.6350"
.375"
VG5410
.015"
.6400"
.375"
VG5415
.025"
.6500"
.375"
VG5425
Intake & Exhaust
Shovel & Pan Head 1200 (1948-1979)
Oversize
O.D.
I.D.
Std.
.5660"
.375"
VG5300
.001"
.5670"
.375"
VG5301
.002"
.5680"
.375"
VG5302
.003"
.5690"
.375"
VG5303
Use with .562" O.E. style valve
seals (K375562).
.004"
.5700"
.375"
VG5304
.005"
.5710"
.375"
VG5305
.006"
.5720"
.375"
VG5306
.008''
.5740''
.375''
VG5308
.010"
.5760"
.375"
VG5310
.015"
.5810"
.375"
VG5315
.025"
.5910"
.375"
VG5325
XL 1957 to early 1983
Made from G2 Cast Iron
Shortened seal section allows
.530" valve seal installation
(K312530 & K341530).
Oversize
O.D.
I.D.
Intake
Std.
.5645"
.309"
VG5100C
Exhaust
.001"
.5655"
.309"
VG5101C
.002"
.5665"
.309"
VG5102C
.003"
.5675"
.309"
VG5103C
Std.
.5645"
.339"
VG5200C
.001"
.5655"
.339"
VG5201C
.002"
.5665"
.339"
VG5202C
.003"
.5675"
.339"
VG5203C
6
Universal repair guides
Ready to be machined as custom
guide.
O.D.
I.D.
Intake & Exhaust
.740"
.273"
UVG7MM
Manganese bronze
.740"
.308"
UVG308
.740"
.375"
UVG375
AV&V's Solid Carbide Valve Guide Reamers
For Manganese bronze only; Do not use with cast iron guides
Tired of loosing your time honing and fitting valve guides?
Here is why AV&V reamers are now used by the top cylinder head shops
in the industry
Specially designed by AV&V for use with manganese bronze material, these unique reamers feature a unique
design and a longer pilot for a perfect alignment with the valve guide while reaming.
You will ream a valve guide to exact dimension without any taper in 4 to 5 seconds only.
Guides will last longer than with the honing method because there is no crosshatch left after reaming.
One size allows you to fit both intake & exhaust if you use AV&V valves & guides.
Diameter
Application
Part No.
4.0MM
4.0MM guides
VGRC4MM
4.5MM
4.5MM guides
VGRC4.5MM
5.0MM
5.0MM guides
VGRC5MM
5.5MM
5.5MM guides
VGRC5.5MM
6.0MM
V-Rod & 6.0MM guides
VGRC6MM
6.5MM
6.5MM guides
VGRC6.5MM
6.6MM
6.6MM guides
VGRC6.6MM
7.0MM
7.0MM guides
VGRC7MM
.2766"
* 7MM TC/Sportster
VGRC2766
.3110"
Evo/TC/Sportster
VGRC3110
.3115"
Evo/TC/Sportster
VGRC3115
.3120"
**Evo/TC/Sportster
VGRC3120
8MM
8MM guides
VGRC8MM
9MM
9MM guides
VGRC9MM
.3777"
Pan / Shovel
VGRC3777
.3782"
*** Pan / Shovel
VGRC3782
* Harley-Davidson 7MM valve guides I.D.are actually 7MM+.001" (.2766")
**Recommended size for all Evo/TC AV&V 5/16 valves
*** Recommended size for all Pan/Shovel AV&V valves
7
AV&V Viton Valve Seals
Made from a special Viton compound, these seals can resist higher temperatures than regular viton seals.
Application
Stem
Dia.
Guide
O.D.
Qty. per
pkg.
Part No.
Replacement seal for V-Rod
6MM
8.5MM
100
V6MM100
Replace 7MM O.E. seal when using larger spring&lower collar.
We strongly recommend the use of our valve seal driver
#VSD7MM to install this seal.
7MM
.562"
100
V7MM100
7MM
.562"
100
V7MMOE100
5/16
.421"
100
V312421100
5/16
.531"
100
V312531100
Replacement for the 7MM O.E. seal.
The viton and the steel section are bounded together to prevent oil
infiltration.
5/16 valves Evo/Twin Cam
This new seal from AV&V offers more press fit on the guide
allowing installation on both Bronze and Cast iron guides.
We strongly recommend the use of our valve seal driver #VSD312
to install this seal.
5/16 valves Evo/Twin Cam
This new seal from AV&V offers more press fit on the guide
allowing installation on both Bronze and Cast iron guides.
We strongly recommend the use of our valve seal driver #VSD312
to install this seal.
AV&V valve seal drivers
-Allows easier and more precise installation of both O.E. or
viton valve seals.
-Valve seal is installed in centerline with the guide.
-Prevent costly comeback caused by a loose seal.
Application
Part No.
For 6MM V-Rod valve seals
VSD6MM
For all 7MM valve seals
VSD7MM
For all 5/16 valve seals
VSD312
For all 3/8 valve seals
VSD378
O.E. Style Valve Seals
Application
Guide
O.D.
Stem
Dia.
Qty. per
pkg.
Part No.
Evo / Twin Cam
.421"
.312"
100
K312420-100
Evo / TC/Iron Head Sportster
.530"
.312"
100
K312530-100
Iron Head Sportster (Exhaust)
.530"
.341"
100
K341530-100
Pan/Shovel Head (1948-1979)
.562"
.375"
100
K375562-100
Shovel Head (1980-1984)
.625"
.375"
100
K375625-100
8
Valve Seat Inserts
AV&V valve seats are made from a highly alloyed
material and feature the following :
Easy oversize identification by the part number
Easy to machine with cutter and stone
Resists severe pounding and dissipates heat better
Work-hardens during running-in
Radiused for easier installation
Replacement Valve Seats for Shovel Heads (No machining required)
O.D.
I.D.
Thickness
Note
Part No.
1.944"
1.575"
.400"
No machining required
AV1944
2.135"
1.750"
.400"
No machining required
AV2135
Oversize Valve Seats (Machining required)
For all cylinder head models
O.D.
I.D.
Thickness
Note
Part No.
1.630"
1.180"
.385"
-
AV1630
1.757"
1.410"
.430"
-
AV1757
1.882"
1.530"
.410"
-
AV1882
2.008"
1.610"
.440"
-
AV2008
2.040"
1.700"
.425"
-
AV2040
2.070"
1.610"
.460"
-
AV2070
2.132"
1.800"
.460"
Ideal size for AV&V 1.990" or 1980-7TGB Int. valve
AV2132
2.163"
1.750"
.455"
-
AV2163
1.757"
1.371"
.315"
Iron Head Sportster (Exhaust)
AV1757S
2.068"
1.750"
.315"
Iron Head Sportster (Intake)
AV2068
1.820"
1.375"
.450"
Universal repair seat
AV1820
1.880"
1.435"
.410"
AV1880
1.945"
1.375"
.440"
AV1945
2.257"
1.550"
.500"
AV2257
9
AV&V Extreme Duty Valve Spring Kit
for V-ROD
Manufactured from ultra clean high silicon
Kobe alloy wire then micro shot peened
and nitrided, these springs have been
designed to be used with high
performance cams.
Recommended for up to .580" lift.
AV&V exclusive POSI-CLAMP keepers that
clamp the valve above and below the 3
grooves for a 55% strenght increase compared to
the stock style triple groove keepers. (see our
technical info section for more details)
Chromoly lightweight retainers.
Maximum
Seat pressure / Open
pressure
Coil bind
height
recommended lift
Retainers
(set of 8)
Lower
collars
use the stock
(set of 8 pr.)
units
Valve locks
.580"
83#@1.500"/280#@0.900"
0.870"
R7000S-8
VL6MMTGC
.580"
83#@1.500"/280#@0.900"
0.870"
R7000S-8
VL6MMSG
Part No.
Complete kit
VSK7000TG
(For triple groove valves)
VSK7000SG
(For single groove valves)
AV&V High Performance Valve Spring Kits
for Twin Cam, Evo & Sportster (for 5/16 v alves)
Manufactured from ultra clean high
silicon/vanadium Kobe alloy wire.
1.375" Top retainers for better clearance
inside rocker covers.
Available with chromoly(S) or
titanium(T) retainers.
Maximum
Seat pressure/ Open
pressure
Coil bind
height
recommended lift
.600"
.600"
.650"
.650"
ves)
Retainers
(set of 4)
155#@1.885"/175#@1.825"
" " " " " "
185#@1.860"/460#@1.160"
" " " " " "
1.080"
1.080"
1.080"
1.080"
R311CS-4
R311CT-4
R311CS-4
R311CT-4
Valve locks
(set of 4
pr.)
VL311A
VL311A
VL311A
VL311A
Lower
collars
(set of 4)
LSC600-4
LSC600-4
LSC600-4
LSC600-4
Part No.
Complete
kit
VSK600S
VSK600T
VSK650S
VSK650T
"S" at the end of part numbers is for Steel retainers and "T" is for Titanium
10
AV&V Extreme Duty Valve Spring Kit
for Twin Cam, Evo & Sportster (for 5/16 valves)
silicon Kobe alloy wire then micro shot
peened and nitrided, these springs have
been designed to be used with Wood
Performance's and other serious high
performance cams.
Recommended for .640" to .675" lift.
1.365" Top retainers for better clearance
inside rocker covers.
Titanium retainers.
Maximum
pressure
Coil bind
height
recommended lift
.675"
Retainers Valve locks
(set of 4)
185#@1.860"/460#@1.160"
1.080"
R311CT-4
(set of 4
pr.)
VL311A
Lower
collars
Part No.
Complete
(set of 4)
kit
LSC600-4 VSK675T
AV&V High Performance BEEHIVE Spring Kits
for 5/16 Valves
peened and nitrided to resist in the most
severe environnements.
CNC machined Extreme Duty 9 deg.
locks.
Ultralite Chromoly forged retainers.
Maximum
pressure
Coil bind
height
recommended lift
.600"
.650"
Retainers
(set of 4)
165#@1.860"/384#@1.250"
180#@1.880"/385#@1.200"
1.200"
1.150"
R6000-4
R6500-4
Valve locks
(set of 4
pr.)
VL311C
VL311C
Lower
collars
(set of 4)
LSC6000-4
LSC6500-4
Part No.
Complete
kit
VSK6000
VSK6500
NOTE: 6000 springs - Small end ID: .650", OD: 1.085" / Large end ID: 1.000", OD: 1.445"
6500 springs - Small end ID: .740", OD: 1.185" / Large end ID: 1.055", OD: 1.500"
11
AV&V High Performance BEEHIVE Spring Kits
for 7MM Valves (Fit both Single Groove and Triple Groove valves)
peened and nitrided to resist in the most
severe environnements.
CNC machined Extreme Duty 9 deg.
locks.
(VSK65007SG )
Ultralite Chromoly forged retainers.
Maximum
pressure
Coil bind
height
recommended lift
.600"
.650"
165#@1.860"/384#@1.250"
178#@1.860"/385#@1.200"
1.200"
Retainers
Valve locks Lower collars
Part No.
(set of 4)
(set of 4
pr.)
Complete kit
R60007SG-4
VL7MMSG
Use O.E. seals VSK60007SG
1.150"
R6500-4
VL7MMSGC
LSC6500-4
VSK65007SG
This kit must
be used with
AV&V V7MM
valve seals
NOTE: 6000 springs - Small end ID: .650", OD: 1.085" / Large end ID: 1.000", OD: 1.445"
6500 springs - Small end ID: .740", OD: 1.185" / Large end ID: 1.055", OD: 1.500"
AV&V Retainer & Lock Kit for stock Beehive Springs
Stronger design than O.E.M. to be used with 7MM Single
groove or triple groove valves.
Kit includes 4 retainers and 4 pair of valve locks
R7MMSGOE-4
12
AV&V High Performance Valve Spring Kits
for Pan & Shovel Heads
silicon & vanadium alloy wire.
CNC machined tight fit locks.
Light weight Chromoly retainers.
Maximum
pressure
Coil bind
height
recommended
lift
Retainers
Valve locks Lower collars
(set of 4)
(set of 4
pr.)
Part No.
Part No.
(set of 4 pr.) Springs only Complete kit
.470"
155#@1.375"/300#@.980"
.850"
R530-4
VL375-4
Use O.E.M.
S470-4
VSK470
.530"
155#@1.455"/320#@.980"
.850"
R530-4
VL375-4
Use O.E.M.
S530-4
VSK530
.625"
175#@1.455"/350#@.980"
.850"
R530-4
VL375-4
Use O.E.M.
S590-4
VSK590
* Note : These Pan/Shovel valve springs are not bolt-in items. Always make sure to check the minimum spring
spacing and to keep a minimum of .060" before coil bind, at full lift.
Early 1948-1980 heads must be machined to accept AV&V's late style lower collars.
You may need to machine the spring seat with Goodson spring seat cutter #VSS-1680HD and/or use AV&V upper
spring collar kit #R530-4 and/or machine the valve seats deeper to get the correct spring spacing.
AV&V Retainers, Lower Collars and Valve Locks for Pan & Shovel
Heads
Description
Part No.
Chromoly Retainers (allows .060" more spring travel)
R530-4
Late style Shovel Lower Spring Collars
LSC530-4
CNC machined Valve Locks
VL375-4
13
AV&V Valve Spring Shims
Perfect Evo / Twin Cam fit
No more automotive adaptation
Hardened steel
Application Thickness
I.D.
O.D.
Part No.
Evo / Twin
.015"
0.600'' 1.480'' VSS5015-20 (pkg of 20)
Cam
Evo / Twin
.015"
0.600'' 1.480'' VSS5015-100 (pkg of 100)
Cam
Evo / Twin
.030"
0.600'' 1.480'' VSS5030-20 (pkg of 20)
Cam
Evo / Twin
.030"
0.600'' 1.480'' VSS5030-100 (pkg of 100)
Cam
TC w/ O.E.
.022''
1.010'' 1.441'' VSS6022-20 (pkg of 20)
style seals
TC w/ O.E.
.022''
1.010'' 1.441'' VSS6022-100 (pkg of 100)
style seals
Compression release valves
AV&V compression release valves are easier to install due to their
short thread section.(# JCR10A & JCR10B). You don't need to
machine the heads as deep like if you were using O.E.M. style .
O.E.M. style also available (# JCR10D)
Ideal for stock replacement
Also their high-temperature resistant knobs are charcoal colored for
a better match with black or silver heads.
14

American V-Twin Catalogue

Transcription

Similar documents