R5 Field Attachables Section 8

Section 8
R5 Field Attachables
8-1
0808-2
08
INFORMATION
INFORMATION
- R5
- R5
FIELD
FIELD
ATTACHABLES
ATTACHABLES
GENERAL
GENERAL
INFORMATION
INFORMATION
PAP
Hydraulink
range
of hose
couplings
available
in three
main
series;
Swage,
Field
Attachable
TheThe
Hydraulink
range
of hose
couplings
areare
available
in three
main
series;
Swage,
Field
Attachable
(often
referred
to as
reusable)
Push-on.
(often
referred
to as
reusable)
andand
Push-on.
TheT
berb
eld
attachable
series
coupling
a specialised
type
eld
attachable,
designed
with
TheThe
R5R5
eld
attachable
series
coupling
is aisspecialised
type
of ofeld
attachable,
designed
for for
useuse
with
Gates
C5C,
C5D
C5M
hoses
(SAE
100R5).
hosetail
is supplied
complete
with
ferrule
Gates
C5C,
C5D
andand
C5M
hoses
(SAE
100R5).
TheThe
hosetail
is supplied
complete
with
ferrule
to to
ensure
compatibility
of hosetail
ferrule.
ensure
compatibility
of hosetail
andand
ferrule.
Mod
M
Hydraulink
thread
formsHydraulink
and
sealing
are
manufactured
to the
relevant
international
standards
NOTE:
Please
contact
Hydraulink
for
further
details
availability
of
hose
couplings
to suit
Gates
NOTE:
Please
contact
formethods
further
details
andand
availability
of hose
couplings
to suit
Gates
where
applicable.
All dimensions shown are nominal, and subject to change due to ongoing
C5E
hose.
C5E
hose.
product development. For critical applications, please contact Hydraulink to confirm dimensions.
Hydraulink
thread
forms
sealing
methods
manufactured
to the
relevant
international
stanHydraulink
thread
forms
andand
sealing
methods
areare
manufactured
to the
relevant
international
stanHydraulink
Australia
Pty Ltd,
reserves
the
right
to
or
to alter
the
and
specification
dards
where
applicable.
dimensions
shown
are
nominal,
and
subject
todesign
change
due
to ongoing
dards
where
applicable.
All All
dimensions
shown
arediscontinue,
nominal,
and
subject
to change
due
to
ongoing
product
development.
critical
applications,
please
contact
Hydraulink
to con
dimensions.
product
development.
critical
applications,
please
contact
Hydraulink
to con
rm rm
dimensions.
of any
product
listed in For
thisFor
catalogue.
Mod
M
Hydraulink
Fluid
Connectors
reserves
right
to discontinue,
or alter
to alter
design
speci
Hydraulink
Fluid
Connectors
Ltd.Ltd.
reserves
thethe
right
to discontinue,
or to
thethe
design
andand
speci
- cation
of any
product
listed
in this
catalogue.
cation
of any
product
listed
in this
catalogue.
Mod
M
Mod
M
88
Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice
8-2
08-308
INFORMATION - R5 FIELD ATTACHABLES
PART NUMBERING SYSTEM – R5 FIELD ATTACHABLE COUPLINGS
ble
The Hydraulink part numbering system is a concise product description in coded form. The part number consists of four modules as follows:
with
Module 1.
s
g
i-
Prex letter; denotes coupling type.
S = Swage
R = Field Attachable (Reusable)
P = Push-on
R5 = Field Attachable (Reusable) to suit SAE 100R5 hose
SU = Suction tail.
Module 2.
Series Numbers; denotes the thread form or sealing method (coupling end) and the
conguration of the hosetail.
E.g.;
series code #51 denotes a BSPP swivel nut female in a swept 90° conguration,
series code #29 denotes a JIC female swivel nut in a compact 90° conguration.
Please refer to the following “Series Codes and Descriptions” for further information
regarding coupling ends and congurations.
Module 3.
Coupling end size; denotes the size of the thread form or sealing method of the
hosetail. Sizes are expressed as follows;
English/American threads; expressed in 1/16th inch increments denoting the key diameter.
For example; 08 = 8/16 = 1/2” and 19 = 19/16 = 1 3/16”.
Metric threads; expressed in millimetres with prex M, denoting the key diameter.
For example; M10 = 10mm O.D. thread.
Flanges; express the nominal size of the ange head. Nominal sizing refers to the maximum
internal bore.
For example a 12 ange head would have a maximum internal bore of 12/16 = 3/4”.
Please refer technical section for further information regarding coupling ends, thread forms
and sealing methods.
Module 4.
Hosetail outside diameter; denotes both the nominal O.D. of the hosetail and the I.D
of the hose it would suit. Sizes are expressed in 1/16th inch increments.
For example; 06 = 6/16 = 3/8” and 20 = 20/16 = 1 1/4”.
Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice
8
8-3
0808-408
INFORMATION
INFORMATION
- R5- R5
FIELD
FIELD
ATTACHABLES
ATTACHABLES
PART
PART
NUMBERING
NUMBERING
SYSTEM
SYSTEM
– R5–FIELD
R5 FIELD
ATTACHABLE
ATTACHABLE
COUPLINGS
COUPLINGS
Part number:
Part number:
R503-1006
R503-1006
Complete
Complete
desription:
desription:
5/8” SAE
5/8” swivel
SAE swivel
nut nut
female
female
x hose
x hose
tail totail
suitto3/8”
suitnominal
3/8” nominal
bore SAE
bore SAE
100R5
100R5
hose hose
(true bore
(true 5/16”),
bore 5/16”),
straight
straight
eld eld
attachable
attachable
coupling.
coupling.
R5 R5
03 -0310- 10
06 06
Module
Module
1. Prefix
1. Prefix
letter letter
“R5” for
“R5”
field
forattachable
field attachable
to
to
suit SAE
suit 100R5
SAE 100R5
hose hose
Module
Module
4. Hosetail
4. Hosetail
O.D. O.D.
“06” for
“06”
6/16ths
for 6/16ths
= 3/8”= 3/8”
N.B. Size
N.B.matches
Size matches
nominal
nominal
internal
internal
diameter
diameter
of hose
of hose
Module
2. Series
code code
Module
2. Series
“03” for
SAE
nut nut
“03”
for swivel
SAE swivel
female,
straight
coupling
female,
straight
coupling
Module
Module
3. Coupling
3. Coupling
end size
end size
“10” for
“10”
10/16ths
for 10/16ths
= 5/8”= 5/8”
Part number:
Part number:
R555-1208
R555-1208
Complete
Complete
desription:
desription:
3/4” JIC
3/4”swivel
JIC swivel
nut nut
female
female
x hose
x hose
tail totail
suitto1/2”
suitnominal
1/2” nominal
bore SAE
bore SAE
100R5
100R5
hose hose
(true bore
(true 13/32”),
bore 13/32”),
sweptswept
90° eld
90° eld
attachable
attachable
coupling.
coupling.
R5 R5
55 -5512- 12
08 08
8 8
Module
Module
1. Prefix
1. Prefix
letter letter
“R5” for
“R5”
field
forattachable
field attachable
to
to
suit SAE
suit 100R5
SAE 100R5
hose hose
Module
Module
4. Hosetail
4. Hosetail
O.D. O.D.
“08” for
“08”
8/16ths
for 8/16ths
= 1/2”= 1/2”
N.B. Size
N.B.matches
Size matches
nominal
nominal
internal
internal
diameter
diameter
of hose
of hose
Module
2. Series
code code
Module
2. Series
“55” for
SAE
nut nut
“55”
for swivel
SAE swivel
female,
sweptswept
90° coupling
female,
90° coupling
Module
Module
3. Coupling
3. Coupling
end size
end size
“12” for
“12”
12/16ths
for 12/16ths
= 3/4”= 3/4”
Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice
SE
CODE
01
02
03
04
05
06
07
08
09
10
11
110
12
13
13R
133
135
14
15
16
17
18
19
20
21
22
225
226
23
236
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
39N
39F
40
S40N
41
42
43
44
45
456
46
465
466
47
48
49
50
GS
8-4
08-508
INFORMATION - R5 FIELD ATTACHABLES
SERIES CODES AND DESCRIPTIONS - HOSETAILS
CODE
DESCRIPTION
CODE DESCRIPTION
01
PARALLEL
SWIVEL
NUT FEMALE
01
BSPBSP
PARALLEL
SWIVEL
NUT FEMALE
02
PARALLEL
SWIVEL
NUT FEMALE
FLATFACE
02
BSPBSP
PARALLEL
SWIVEL
NUT FEMALE
FLATFACE
03
SAE
SWIVEL
NUT
FEMALE
03
SAE SWIVEL NUT FEMALE
04
JIC SOLID
(FIXED)
FEMALE
05
JIC SWIVEL
NUT
FEMALE
05
JIC SWIVEL
NUT FEMALE
07
NPSM SWIVEL
NUT FEMALE
06
BSPT
SOLID
(FIXED) FEMALE
09
SAE
MALE
07
NPSM
SWIVEL
NUT FEMALE
10
SAE
INVERTED
FLARE MALE
08
BSPNPTF
PARALLEL
SOLID
(FIXED)
FEMALE
11
SOLID
(FIXED)
FEMALE
09
SAESAE
MALE
110
CODE 61 FLANGE 110° SWEPT BEND
10
SAEBSP
INVERTED
FLARE
MALE
12
PARALLEL
MALE
11
NPTF
SOLID
(FIXED)NUT
FEMALE
13
ORFS
SWIVEL
FEMALE
110
SAESAE
CODE
61 FLANGE
110° SWEPT
BENDBEND
135
CODE
61 FLANGE
135° SWEPT
12
BSPBSP
PARALLEL
14
TAPERMALE
MALE SWIVEL
13
ORFS
SWIVEL
NUT
FEMALE
15
BSP TAPER MALE
13R
ORFS
SWIVEL
16
NPT
MALENUT FEMALE, SHORT STEM
133
ORFS
18
JICSWIVEL
MALE NUT FEMALE 30° SWEPT BEND
135
SAEUNO
CODE
61 FLANGE
19
MALE
SWIVEL135° SWEPT BEND
14
BSPUNO
TAPER
MALE SWIVEL
20
MALE
15
BSPSAE
TAPER
MALE
22
CODE
62 FLANGE STRAIGHT
16
NPTF
MALE
225
CAT
STYLE FLANGE STRAIGHT
17
METRIC
(STUD
END) 62 FLANGE STRAIGHT
226
O&KMALE
STYLE
SAE CODE
18
JIC
MALE
23
SAE CODE 61 FLANGE STRAIGHT
19
UNOO&K
MALE
SWIVEL
236
STYLE
SAE CODE 61 FLANGE STRAIGHT
20
UNOBSP
MALE
25
PARALLEL SWIVEL NUT FEMALE 90 COMPACT
21
POCLAIN
FLANGE
29
JIC SWIVEL NUT FEMALE 90° COMPACT
22
SAEWATERBLAST
CODE 62 FLANGE
STRAIGHT
30
SWIVEL
NUT FEMALE
225
CAT
XT5 FLANGE
STRAIGHT
KARCHER KARCHER
STYLE
MALE HOSETAIL
226
O&KUNO
SAE MALE
CODE SWIVEL
62 FLANGE
32
90° STRAIGHT
COMPACT
23
SAE CODE 61 FLANGE STRAIGHT
38BANJO
236
O&K SAE CODE 61 FLANGE STRAIGHT
40
ORFS MALE
24
BSPT MALE SWIVEL 90°
41
SAE SWIVEL NUT FEMALE 90° SWEPT BEND
25
BSP PARALLEL SWIVEL NUT FEMALE 90° COMPACT
42
SAE INVERTED FLARE MALE 45 SWEPT BEND
26
BSPT MALE 90° COMPACT
43
SAE INVERTED FLARE MALE 90 SWEPT BEND
27
SAE SWIVEL NUT FEMALE 90° COMPACT
44
KOBELCO STYLE METRIC MALE
28
JIC MALE SWIVEL 90° COMPACT
45
SAE CODE 61 FLANGE 30° SWEPT BEND
29
JIC SWIVEL NUT FEMALE 90° COMPACT
465
CAT STYLE XT5 FLANGE 30° SWEPT BEND
30
WATERBLAST SWIVEL NUT FEMALE
47
METRIC MALE FRENCH GAZ
31
DIN METRIC 60° CONE MALE STRAIGHT
50
STAPLELOCK MALE
32
UNO MALE SWIVEL 90° COMPACT
51
BSPP 90°
S/NUT
F/M 90° SWEPT BEND
33
JIC MALE
COMPACT
52
ORFS S/NUT
F/M 90°
SWEPT BEND
34
JIS (KOMATSU)
METRIC
MALE
545
CAT
SAE
CODE
62 FLANGE
60° SWEPT BEND
35
JIS 30° FLARE (MITSUBISHI)
MALE
36
BSP TAPER MALE 45°
37
SAE SWIVEL NUT FEMALE 45° SWEPT BEND
38
BANJO
39
POCLAIN FLANGE
P/N
CODES
39N SUFFIX
POCLAIN
FLANGE 90°
G
GATES
MEGACRIMP
BRAIDED NON SKIVE
39F
POCLAIN
FLANGE
45°
GL
GATES
40
ORFS MALEMEGAVAC COUPLINGS
GS
GATES
SPIRAL
S40N ORFS
MALEGLOBAL
90° SWEPT
BENDNON-SKIVE
GSH
SPIRAL
-24&-32 ONLY
41
SAEGATES
SWIVELGLOBAL
NUT FEMALE
90°NON-SKIVE
SWEPT BEND
42
SAE INVERTED FLARE MALE 45° SWEPT BEND
43
SAE INVERTED FLARE MALE 90 SWEPT BEND
44
KOBELCO METRIC MALE
45
SAE CODE 61 FLANGE 30° SWEPT BEND
456
O&K SAE CODE 61 FLANGE 30° SWEPT BEND
46
SAE CODE 62 FLANGE 30° SWEPT BEND
465
CAT XT5 FLANGE 30° SWEPT BEND
466
O&K SAE CODE 62 FLANGE 30° SWEPT BEND
47
FRENCH GAZ METRIC MALE
48
JIS ( KOMATSU ) METRIC MALE
49
STAPLELOCK FEMALE
50
STAPLELOCK MALE
CODE DESCRIPTION
CODE
DESCRIPTION
55
JIC
S/NUTNUT
F/M FEMALE
90° SWEPT
51
BSPP
SWIVEL
90° BEND
SWEPT BEND
56
ORFS
S/NUT
90° LONG
LEG SWEPT
52
ORFS
SWIVEL
NUTF/M
FEMALE
90° SWEPT
BEND BEND
58
JIC
S/NUT
F/M
90°
LONG
LEG
SWEPT
BEND BEND
53
METRIC ISO/GAZ SWIVEL NUT FEMALE
90° SWEPT
54
SAE SAE
CODE
62 FLANGE
60° SWEPT
BEND BEND
59
CODE
61 FLANGE
90° SWEPT
545
CAT BSPP
XT5 FLANGE
BENDBEND
60
S/NUT 60°
F/MSWEPT
45° SWEPT
55
JIC SWIVEL
NUT62
FEMALE
90°90°
SWEPT
BEND
61
SAE CODE
FLANGE
SWEPT
BEND
56
ORFS
SWIVEL
NUT
FEMALE
LONGBEND
LEG SWEPT BEND
615
CAT
STYLE
FLANGE
90°90°
SWEPT
57
BSPP
SWIVEL
NUT
FEMALE
LEG
SWEPT
BEND
616
O&K
STYLE
SAE
CODE90°
62 LONG
FLANGE
90°
SWEPT
BEND
58
JIC SWIVEL
NUT62
FEMALE
90°45°
LONG
LEG BEND
SWEPT BEND
62
SAE CODE
FLANGE
SWEPT
59
SAE CAT
CODE
61 FLANGE
90°45°
SWEPT
BEND
625
STYLE
FLANGE
SWEPT
BEND
60
BSPP
SWIVEL
NUT
FEMALE
626
O&K
STYLE
SAE
CODE45°
62 SWEPT
FLANGEBEND
45° SWEPT BEND
61
SAE ORFS
CODE S/NUT
62 FLANGE
90° SWEPT
SWEPT BEND
BEND
63
F/M 45°
615
CAT JIC
XT5S/NUT
FLANGE
90°
SWEPT
BEND
64
F/M
45°
SWEPT
BEND
616
O&KMC
SAETEST
CODE
62 FLANGE
90°FEMALE/SPIGOT
SWEPT BEND
65
POINT
METRIC
62
SAE SAE
CODE
62 FLANGE
45° SWEPT
BEND BEND
66
CODE
61 FLANGE
60° SWEPT
625
CAT SAE
XT5 FLANGE
SWEPT22.5°
BEND
67
CODE 6145°
FLANGE
SWEPT BEND
626
O&KCAT
SAESTYLE
CODE 62
FLANGE
45° SWEPT
SWEPT BEND
675
FLANGE
22.5°
BEND
63
ORFS
SWIVEL
FEMALE 45°
68
SAE
CODENUT
61 FLANGE
45° SWEPT
SWEPTBEND
BEND
64
JIC SWIVEL
NUT61
FEMALE
45°67.5°
SWEPT
BENDBEND
69
SAE CODE
FLANGE
SWEPT
65
MINI-CHECK
TEST
POINT METRIC
FEMALE/SPIGOT
695
CAT STYLE
FLANGE
67.5° SWEPT
BEND
66
SAE METRIC
CODE 61JIS
FLANGE
60° SWEPT
BEND
70
( KOMATSU
STYLE
) S/NUT F/M
67
SAE JIS
CODE
61 FLANGE
22.5° )SWEPT
BEND
71
( KOMATSU
STYLE
FLANGE
STRAIGHT
674
SAE JIS
CODE
62 FLANGE
22.5° )SWEPT
BEND
72
( KOMATSU
STYLE
FLANGE
90° SWEPT BEND
675
CAT JIS
XT5(FLANGE
22.5°
SWEPT
BEND 45° SWEPT BEND
73
KOMATSU
STYLE
) FLANGE
68
SAE
CODE
61
FLANGE
45°
SWEPT
BEND
74
METRIC FRENCH GAZ S/NUT F/M
69
SAE JIS
CODE
FLANGE
67.5° SWEPT
BENDS/NUT F/M
75
30°61
FLARE
( MITSUBISHI
STYLE)
695
CAT
XT5 FLANGE
67.5° SWEPT
BEND
77
METRIC
GLOBESEAL
S/NUT
F/M
70
JIS ( METRIC
KOMATSU
) METRIC
78
HEAVY
DIN SWIVEL
MALE NUT FEMALE
71
JIS ( KOMATSU ) FLANGE STRAIGHT
79
METRIC HEAVY DIN S/NUT F/M
72
JIS ( KOMATSU ) FLANGE 90° SWEPT BEND
80
METRIC LIGHT DIN MALE
73
JIS ( KOMATSU ) FLANGE 45° SWEPT BEND
81
METRIC LIGHT DIN S/NUT F/M
74
FRENCH GAZ METRIC SWIVEL NUT FEMALE
82
METRIC STANDPIPE
75
JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEMALE
83
METRIC HEAVY DIN S/NUT F/M 90° SWEPT BEND
76
DIN METRIC 60° CONE SWIVEL NUT FEMALE
84
METRIC HEAVY DIN S/NUT F/M 45° SWEPT BEND
77
METRIC GLOBESEAL SWIVEL NUT FEMALE
86
METRIC LIGHT DIN S/NUT F/M 90° SWEPT BEND
78
HEAVY DIN METRIC MALE
87
METRIC LIGHT DIN S/NUT F/M 45° SWEPT BEND
79
HEAVY DIN METRIC SWIVEL NUT FEMALE
89
METRIC JIS ( KOMATSU STYLE ) S/NUT F/M 90° SWEPT BEND
80
LIGHT DIN METRIC MALE
90
HOSE JOINER
81
LIGHT DIN METRIC SWIVEL NUT FEMALE
92
IMPERIAL
STANDPIPE
82
METRIC
STANDPIPE
96LIFESAVER
83
HEAVY DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BEND
97
WEO
STRAIGHT
S/PIPENUT FEMALE 45° SWEPT BEND
84
HEAVY DIN METRIC SWIVEL
85
HEAVY DIN METRIC SWIVEL NUT FEMALE 90° COMPACT
86
LIGHT DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BEND
87
LIGHT DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BEND
88
LIGHT DIN METRIC SWIVEL NUT FEMALE 90° COMPACT
SUFFIXJIS
CODES
FOR CODE
NUMBERS
89
( KOMATSU
) METRIC
SWIVEL NUT FEMALE 90° SWEPT BEND
N
NINETY
DEGREE EG;S40N
90
HOSE
JOINER
F
FORTYFIVE
DEGREE
S40F NUT FEM. 90° SWEPT BEND
91
JIS 30° FLARE ( MITSUBISHI EG;
) SWIVEL
S
SWIVEL
MALE
EG; SI8S
92
IMPERIAL
STANDPIPE
C
CYLINDRICAL/ROUND
BAR TAIL STYLE e.g. S01C
93
METRIC
90° STANDPIPE
H
BAR TAIL
e.g. S01H
94
SAE HEX
IMPERIAL
TUBESTYLE
CONNECTOR
L
LONG
DROP
90’
e.g. S59L-1616
95
DIN 60° METRIC SWIVEL NUT FEMALE 90° SWEPT
BEND
MMETRIC
96
LIFESAVER
XH
97
WEOHEAVY
(CEJN)DUTY
STRAIGHT STANDPIPE
SUFFIX CODES FOR SERIES CODES
N
F
S
K
C
H
NINETY DEGREE
e.g. S40N
FORTY FIVE DEGREE
e.g. S40F
SWIVEL MALE
e.g. SI8S
COMPACT BLOCK 45°
e.g. S64K, S60K
CYLINDRICAL/ROUND BAR TAIL STYLE e.g. S01C
HEXAGONAL BAR TAIL STYLE e.g. S05H
SUFFIX CODES FOR PART NUMBERS
GS
PCM
GATES GLOBAL SPIRAL NON-SKIVE e.g. S66-2020GS
GATES SPIRAL SKIVE TYPE
e.g. SMS15-24PCM
Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice
8
8-5
0808-6
08
INFORMATION
INFORMATION
- R5
- R5
FIELD
FIELD
ATTACHABLES
ATTACHABLES
08
ASSEMBLY
ASSEMBLY
INSTRUCTIONS
INSTRUCTIONS
INFORMATION - R5 FIELD ATTACHABLES
Non-Skive
Non-Skive
Field
Field
Attachable
Attachable
Couplings
Couplings
Ensure
Ensure
hosehose
is cut
is square,
cut square,
withwith
minimal
minimal
end end
ASSEMBLY
INSTRUCTIONS
“aring”.
“aring”.
JIC
Screw
Screw
ferrule
ferrule
body
body
ontoonto
hosehose
in aninantian antiNon-Skive
Field
Attachable
Couplings
clockwise
clockwise
direction
direction
until
until
hose
hose
is
3
is
to
3
5mm
to end
5mm
clearclear
Ensure hose is cut square, with minimal
of
inside
of
inside
body.
body.
“aring”.
JIC
Lightly
lubricate
the onto
tailpiece
the
female
Lightly
lubricate
tailpiece
the tailpiece
and
and
theantifemale
the female
Screw
ferrule
body
hoseand
in an
thread
of
the
ferrule
body,
then
screw
the
thread
of
ferruke
the
ferruke
body,
body,
then
then
screw
screw
the clear
the
clockwise direction until hose is 3 to 5mm
tailpiece
into
the
ferrule
body
in
a
clockwise
tailpiece
into
ferrule
the
ferrule
body
body
in
a
in
clockwise
a
clockwise
of inside body.
direction
untiluntil
the hex
abuts
the
direction
the on
hex
on the
the
ontailpiece
tailpiece
the tailpiece
abuts
abuts
the the
Lightly
lubricate
ferrule
body.
ferrule
body.the tailpiece and the female
thread of the ferruke body, then screw the
tailpiece into the ferrule body in a clockwise
direction until the hex on the tailpiece abuts the
ferrule body.
JIC
JIC
SAE
SAE
SAE
SAE
88
8
Please
Please
refer
refer
to training
to training
manual
manual
for more
for more
detailed
detailed
assembly
assembly
instructions.
instructions.
Please refer to training manual for more detailed assembly instructions.
Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice
8-6
R5 FIELD ATTACHABLE COUPLINGS INDEX
NPTF
NPTF MALE STRAIGHT
R516
Page 8 - 8
NPTF MALE STRAIGHT
FOR C5E
R5E16
Page 8 - 8
JIC
JIC FEMALE STRAIGHT
R505
Page 8 - 9
JIC FEM. SWEPT 90°
R555
Page 8 - 11
JIC FEMALE STRAIGHT
FOR C5E
R5E05
Page 8 - 10
JIC FEM. SWEPT 90° FOR
C5E
R5E55
Page 8 - 12
JIC FEM. SWEPT 45°
R564
Page 8 - 10
JIC FEM. SWEPT 45° FOR
C5E
R5E64
Page 8 - 11
8-7
R5 FIELD ATTACHABLE COUPLINGS INDEX
SAE
SAE FEMALE STRAIGHT
R503
Page 8 - 12
SAE FEMALE SWEPT 90°
R541
Page 8 - 14
SAE FEMALE STRAIGHT
FOR C5E
R5E03
Page 8 - 13
SAE FEMALE SWEPT 45°
R537
Page 8 - 13
SAE FEMALE SWEPT 45°
FOR C5E
R5E37
Page 8 - 13
SAE FEMALE SWEPT 90°
FOR C5E
R5E41
Page 8 - 14
INVERTED SAE
SAE MALE SWIVEL
STRAIGHT
SAE MALE SWIVEL
STRAIGHT FOR C5E
SAE INVERTED FLARE
45° SWEPT
SAE INVERTED FLARE
45° SWEPT FOR C5E
R510
Page 8 - 14
R5E10
Page 8 - 15
R542
Page 8 - 15
R5E42
Page 8 - 15
SAE MALE SWIVEL
SWEPT 90°
SAE MALE SWIVEL
SWEPT 90° FOR C5E
R543
Page 8 - 16
R5E43
Page 8 - 16
8-8
R5 FIELD ATTACHABLE COUPLINGS
NPTF
R516
NPTF MALE STRAIGHT
NPTF MALE 60° CONE SUIT C5C C5D & C5M HOSE
Part Number
BSPT Male
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose
I.D - inches
True Hose
I.D - mm
Dash size
Hex A/F (E)
Cutoff - C
R516-0204
1/8-27
1/4
6.4
3/16
4.8
04
12.7
23.9
R516-0404
1/4-18
1/4
6.4
3/16
4.8
04
14.3
28.7
R516-0606
3/8-18
3/8
9.5
5/16
8
06
17.5
31
R516-0808
1/2-14
1/2
12.7
13/32
10.3
08
22.2
40.4
R516-1212
3/4-14
3/4
19
5/8
15.9
12
27
42.9
R516-1616
1-11.1/2
1
25.4
7/8
22.2
16
34.9
43.7
NPTF
R5E16
NPTF MALE STRAIGHT FOR C5E
NPTF MALE 60° CONE SUIT C5E HOSE
Part Number
BSPT Male
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose
I.D - inches
True Hose
I.D - mm
Dash size
Hex A/F (E)
Cutoff - C
R5E16-0204
1/8-27
1/4
6.4
3/16
4.8
04
12.7
20.6
R5E16-0404
1/4-18
1/4
6.4
3/16
4.8
04
14.3
26.2
R5E16-0606
3/8-18
3/8
9.5
5/16
8
06
17.5
26.4
R5E16-0808
1/2-14
1/2
12.7
13/32
10.3
08
22.2
32.8
R5E16-1212
3/4-14
3/4
19
5/8
15.9
12
27
36.6
R5E16-1616
1-11.1/2
1
25.4
7/8
22.2
16
34.9
44.2
8-9
R5 FIELD ATTACHABLE COUPLINGS
JIC
R505
JIC FEMALE STRAIGHT
JIC FEMALE 37° CONE CRIMPED NUT
Part Number
JIC Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
R505-0704
R505-0805
True Hose True Hose
I.D - inches I.D - mm
Dash size
Hex A/F (E)
Hex A/F
(E1)
Cutoff - C
7/16-20
1/4
6.4
3/16
1/2-20
5/16
8
1/4
4.8
04
14.3
14.3
31
6.4
05
17.5
17.5
34
R505-0906
9/16-18
3/8
9.5
5/16
8
06
19
19
36.6
R505-1206
3/4-16
3/8
9.5
5/16
8
06
22.2
22.2
38.9
R505-1208
3/4-16
1/2
12.7
13/32
10.3
08
22.2
22.2
41.4
R505-1410
7/8-14
5/8
15.9
1/2
12.7
10
27
27
46
R505-1712
1.1/16-12
3/4
19
5/8
15.9
12
31.8
31.8
49.3
R505-2116
1.5/16-12
1
25.4
7/8
22.2
16
38.1
38.1
49.3
R505-2620
1.5/8-12
1.1/4
31.8
1.1/8
28.6
20
50.8
50.8
55.6
R505-3024
1.7/8-12
1.1/2
38.1
1.3/8
34.9
24
57.2
57.2
60.2
R505-4032
2.1/2-12
2
50.8
1.13/16
46
32
73
63.5
69.1
8 - 10
R5 FIELD ATTACHABLE COUPLINGS
JIC
R5E05
JIC FEMALE STRAIGHT FOR C5E
JIC FEMALE 37° CONE CRIMPED NUT
Part Number
JIC Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
R5E05-0704
R5E05-0805
True Hose True Hose
I.D - inches I.D - mm
Dash size
Hex A/F (E)
Hex A/F
(E1)
Cutoff - C
7/16-20
1/4
6.4
3/16
1/2-20
5/16
8
1/4
4.8
04
14.3
12.7
27.9
6.4
05
17.5
12.7
30.7
R5E05-0906
9/16-18
3/8
9.5
5/16
8
06
19
19
30.2
R5E05-1208
3/4-16
1/2
12.7
13/32
10.3
08
22.2
22.2
36.8
R5E05-1410
7/8-14
5/8
15.9
1/2
12.7
10
27
27
41.9
R5E05-1712
1.1/16-12
3/4
19
5/8
15.9
12
31.8
31.8
45.2
R5E05-2116
R5E05-2620
1.5/16-12
1
25.4
7/8
22.2
16
38.1
38.1
46.7
1.5/8-12
1.1/4
31.8
1.1/8
28.6
20
50.8
39.7
55.9
Dash size
Hex A/F (E)
Drop - H
Cutoff - C
JIC
R564
JIC FEM. SWEPT 45°
JIC 45° SWEPT ELBOW 37° CONE ROLLED NUT
Part Number
JIC Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
R564-0704
7/16-20
1/4
6.4
3/16
4.8
04
14.3
8.6
30.7
R564-0906
9/16-18
3/8
9.5
5/16
8
06
17.5
10.4
36.8
R564-1208
3/4-16
1/2
12.7
13/32
10.3
08
22.2
14.2
47.2
R564-1410
7/8-14
5/8
15.9
1/2
12.7
10
25.4
16
58.7
R564-1712
1.1/16-12
3/4
19
5/8
15.9
12
31.8
19.8
68.8
8 - 11
R5 FIELD ATTACHABLE COUPLINGS
JIC
R5E64
JIC FEM. SWEPT 45° FOR C5E
JIC 45° SWEPT ELBOW 37° CONE ROLLED NUT
Part Number
JIC Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
Dash size
Hex A/F (E)
Drop - H
Cutoff - C
R5E64-0704
7/16-20
1/4
6.4
3/16
4.8
04
14.3
8.6
30.5
R5E64-0906
9/16-18
3/8
9.5
5/16
8
06
17.5
10.4
37.6
R5E64-1208
3/4-16
1/2
12.7
13/32
10.3
08
22.2
14.2
43.9
R5E64-1410
7/8-14
5/8
15.9
1/2
12.7
10
25.4
16
53.6
R5E64-1712
1.1/16-12
3/4
19
5/8
15.9
12
31.8
19.8
63.3
Dash size
Hex A/F (E)
Drop (H)
Cutoff - C
JIC
R555
JIC FEM. SWEPT 90°
JIC FEMALE 37° CONE CRIMPED NUT
Part Number
JIC Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
R555-0704
R555-0805
True Hose True Hose
I.D - inches I.D - mm
7/16-20
1/4
6.4
3/16
4.8
04
14.3
17.5
27.4
1/2-20
5/16
8
1/4
6.4
05
15.9
19.8
31.8
R555-0906
9/16-18
3/8
9.5
5/16
8
06
17.5
21.3
33.8
R555-1208
3/4-16
1/2
12.7
13/32
10.3
08
22.2
27.7
42.4
R555-1410
7/8-14
5/8
15.9
1/2
12.7
10
25.4
31.8
53.9
R555-1712
1.1/16-12
3/4
19
5/8
15.9
12
31.8
46
67.6
R555-2116
1.5/16-12
1
25.4
7/8
22.2
16
38.1
54.9
70.1
8 - 12
R5 FIELD ATTACHABLE COUPLINGS
JIC
R5E55
JIC FEM. SWEPT 90° FOR C5E
JIC FEMALE 37° CONE CRIMPED NUT
Part Number
JIC Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
Dash size
Hex A/F (E)
Drop (H)
Cutoff - C
R5E55-0704
7/16-20
1/4
6.4
3/16
4.8
04
14.3
17.5
25.4
R5E55-0906
9/16-18
3/8
9.5
5/16
8
06
17.5
21.3
34.5
R5E55-1208
3/4-16
1/2
12.7
13/32
10.3
08
22.2
27.7
39.1
R5E55-1410
7/8-14
5/8
15.9
1/2
12.7
10
25.4
31.8
48.5
R5E55-1712
1.1/16-12
R5E55-2116
1.5/16-12
3/4
19
5/8
15.9
12
31.8
46
62
1
25.4
7/8
22.2
16
38.1
54.9
67.6
Dash size
Hex A/F (E)
Hex A/F
(E1)
Cutoff - C
SAE
R503
SAE FEMALE STRAIGHT
SAE FEMALE STRAIGHT CRIMPED NUT
Part Number
SAE
Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
R503-1006
5/8-18
3/8
9.5
5/16
8
06
19
19
37.3
R503-1712
1.1/16-14
3/4
19
5/8
15.9
12
31.8
31.8
49.3
8 - 13
R5 FIELD ATTACHABLE COUPLINGS
SAE
R5E03
SAE FEMALE STRAIGHT FOR C5E
SAE FEMALE 45° CONE CRIMPED NUT
Part Number
SAE
Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
Dash size
R5E03-1006
5/8-18
3/8
9.5
5/16
8
06
R5E03-1712
1.1/16-14
3/4
19
5/8
15.9
12
Dash size
Hex A/F (E)
Hex A/F
(E1)
Cutoff - C
19
19
32.5
31.8
31.8
45.7
Hex A/F (E)
Drop (H)
Cutoff - C
SAE
R537
SAE FEMALE SWEPT 45°
SAE FEMALE SWEPT 45° CRIMPED NUT
Part Number
SAE
Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
R537-1006
5/8-18
3/8
9.5
5/16
8
06
19
10.4
37.3
R537-1712
1.1/16-14
3/4
19
5/8
15.9
12
31.8
18.8
68.8
Dash size
Hex A/F (E)
Drop (H)
Cutoff - C
SAE
R5E37
SAE FEMALE SWEPT 45° FOR C5E
SAE FEMALE SWEPT 45° CRIMPED NUT
Part Number
SAE
Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
R5E37-1006
5/8-18
3/8
9.5
5/16
8
06
19
10.4
37.6
R5E37-1712
1.1/16-14
3/4
19
5/8
15.9
12
31.8
19.8
63.3
8 - 14
R5 FIELD ATTACHABLE COUPLINGS
SAE
R541
SAE FEMALE SWEPT 90°
SAE FEMALE SWEPT 90° CRIMPED NUT
Part Number
SAE
Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
R541-1006
5/8-18
3/8
9.5
5/16
R541-1712
1.1/16-14
3/4
19
5/8
Dash size
Hex A/F (E)
Drop (H)
Cutoff - C
8
06
19
21.3
33.8
15.9
12
31.8
46
67.6
Dash size
Hex A/F (E)
Drop (H)
Cutoff - C
SAE
R5E41
SAE FEMALE SWEPT 90° FOR C5E
SAE FEMALE 45° CONE CRIMPED NUT
Part Number
SAE
Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
R5E41-1006
5/8-18
3/8
9.5
5/16
8
06
19
21.3
34.5
R5E41-1712
1.1/16-14
3/4
19
5/8
15.9
12
31.8
46
62
Dash size
Hex A/F (E)
Hex A/F
(E1)
Cutoff - C
INVERTED SAE
R510
SAE MALE SWIVEL STRAIGHT
SAE MALE 45° INVERTED FLARE SWIVEL STRAIGHT
Part Number
SAE Male
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
R510-0704
7/16-20
1/4
6.4
3/16
4.8
04
11.1
11.1
43.7
R510-0805
1/2-20
5/16
8
1/4
6.4
05
12.7
11.1
46.7
R510-0806
1/2-20
5/16
8
1/4
6.4
05
12.7
12.7
41.9
R510-1006
5/8-18
3/8
9.5
5/16
8
06
15.9
12.7
48.5
R510-1208
3/4-16
1/2
12.7
13/32
10.3
08
19
15.9
60.2
8 - 15
R5 FIELD ATTACHABLE COUPLINGS
INVERTED SAE
R5E10
SAE MALE SWIVEL STRAIGHT FOR C5E
SAE MALE 45° INVERTED FLARE SWIVEL
Part Number
SAE Male
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
Dash size
Hex A/F (E)
Hex A/F
(E1)
Cutoff - C
R5E10-0704
7/16-20
1/4
6.4
3/16
4.8
04
11.1
12.7
33.8
R5E10-0805
1/2-20
5/16
8
1/4
6.4
05
12.7
12.7
36.8
R5E10-0806
1/2-20
3/8
9.5
5/16
8
05
12.7
12.7
39.1
R5E10-1006
5/8-18
3/8
9.5
5/16
8
06
15.9
12.7
47.2
R5E10-1208
3/4-16
1/2
12.7
13/32
10.3
08
19
17.5
56.9
Dash size
Hex A/F (E)
Drop (H)
Cutoff - C
INVERTED SAE
R542
SAE INVERTED FLARE 45° SWEPT
SAE MALE 45° INVERTED FLARE SWIVEL SWEPT 45°
Part Number
SAE
Female
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
R542-1006
5/8-18
3/8
9.5
5/16
8
06
16
23.9
53.1
R542-1208
3/4-16
1/2
12.7
13/32
10.3
08
19
27.7
58.9
Dash size
Hex A/F (E)
Drop (H)
Cutoff - C
INVERTED SAE
R5E42
SAE INVERTED FLARE 45° SWEPT FOR C5E
SAE MALE 45° INVERTED FLARE SWIVEL SWEPT 45°
Part Number
SAE Male
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
R5E42-1006
5/8-18
3/8
9.5
5/16
8
06
16
21.3
74.7
R5E42-1208
3/4-16
1/2
12.7
13/32
10.3
08
19
27.7
82.3
8 - 16
R5 FIELD ATTACHABLE COUPLINGS
INVERTED SAE
R543
SAE MALE SWIVEL SWEPT 90°
SAE MALE 45° INVERTED FLARE SWIVEL SWEPT 90°
Part Number
SAE Male
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
True Hose True Hose
I.D - inches I.D - mm
Dash size
Hex A/F (E)
Drop (H)
Cutoff - C
R543-0704
7/16-20
1/4
6.4
3/16
4.8
04
11.1
39.6
37.3
R543-0805
1/2-20
5/16
8
1/4
6.4
05
12.7
42.2
42.2
R543-1006
5/8-18
3/8
9.5
5/16
8
06
15.9
42.9
42.9
R543-1208
3/4-16
1/2
12.7
13/32
10.3
08
19
45.2
45.2
Dash size
Hex A/F (E)
Drop (H)
Cutoff - C
INVERTED SAE
R5E43
SAE MALE SWIVEL SWEPT 90° FOR C5E
SAE MALE 45° INVERTED FLARE SWIVEL
Part Number
SAE Male
Thread (T)
Nominal
Hose I.D inches
Nominal
Hose I.D mm
R5E43-0704
7/16-20
1/4
6.4
R5E43-0805
1/2-20
5/16
R5E43-0806
1/2-20
3/8
R5E43-1006
5/8-18
3/8
R5E43-1208
3/4-16
1/2
True Hose True Hose
I.D - inches I.D - mm
3/16
4.8
04
11.1
31.8
33.8
8
1/4
6.4
05
12.7
38.1
37.1
9.5
5/16
8
05
12.7
38.1
39.1
9.5
5/16
8
06
15.9
41.4
47.2
12.7
13/32
10.3
08
19
50.8
56.9