1] Catalogue in pdf format
Transcription
1] Catalogue in pdf format
DASHMESH PRECISION TOOL HOLDER TECHNOLOGY MILLENNIUM SERIES Dashmesh Engineering ISO/SK - Taper DIN: 69 871 Gage Plane g Taper ØD Ø D1 Ø D2 Ø D3 L1 L2 L3 L4 L5 33.5 24 5.5 42.5 32 8.2 ± 0.05 30 31.75 44.3 50 59.3 47.8 40 44.45 56.25 63.55 72.3 68.4 45 57.15 75.25 82.55 91.35 82.7 52.5 40 10 50 69.85 91.25 97.50 107.25 101.75 61.5 47 11.5 Ød Roller 7 Ø d1 h7 19.1 d2 g V t 6H ±0.1 ±0.1 -0.4 t1 -0.4 t2 -0.3 H12 b 16.4 19 15 16.1 22.8 25 18.5 16.1 13 M12 17 M16 21 M20 29.1 31.3 24 19.3 25 M24 35.5 37.7 30 25.7 3.2 11.1 All dimensions in mm as per DIN: 69 871 (IS: 11173 - 1985) Available in Coolant Thru’ Flange & Pull Stud type also. 1 Dashmesh Engineering BT - Taper MAS 403 - 1982. Gage Plane g BT D D1 D2 D3 h8 ±0.05 d d1 d2 H7 L2 L3 L4 L5 L6 +0.5 30 31.75 38 50 56.144 8 12.5 M 12 48.4 20 34 24 7 17 40 44.45 53 63 75.679 10 17 M 16 65.4 25 43 30 9 21 45 57.15 73 85 100.215 12 21 M 20 82.8 30 53 38 11 26 50 69.85 85 100 119.019 15 25 M 24 101.8 35 62 45 13 31 BT g ±0.4 x x1 V ±0.1 b H12 t -0.2 30 2 4 8 13.6 16.1 16.3 40 2 5 10 16.6 16.1 22.6 45 3 6 12 21.2 19.3 29.1 50 3 7 15 23.2 25.7 35.4 All dimensions in mm as per MAS 403 (IS: 11173 - 1985) 2 L1 ±0.2 Dashmesh Engineering ISO Taper Details DIN 2080 / IS 2340. Ød 2 Gage Gap Ød x Ød 1 A ØD 8°17'50" Y-Max . L2 L1 b L3 . . W VA L 7/24 Taper ØD Ød Ød1 Ød2 L L1 L2 L3 b W H 12 Y Max x ISO 30 31.75 17.4 16.5 50 70 17 3 50 8 16.1 16.2 1.6 ISO 40 44.45 25.3 24 63 95 23 5 67 10 16.1 22.5 ±0.4 ISO 50 69.85 39.6 38 100 130 17 8 105 12 25.7 35.3 3.2 ISO 60 107.95 60.2 58 160 210 35 10 165 16 25.7 60 ±0.4 All Taper Dimensions as per DIN:2080 / IS:2340 - 1972 confirming to ISO/R 297. 3 Dashmesh Engineering Long Milling Arbor 7/24 Taper 7/24 Taper 30 40 50 60 D1 50 63 100 160 e 8 10 12 16 L1 20 25 30 40 D2 min d h6 63 100 160 200 250 315 400 500 630 800 1000 27 16 X X X X X X ---- ---- ---- ---- ---- M 16x1.5 16 34 22 X X X X X X X ---- ---- ---- ---- M 20x2 22 41 27 X X X X X X X X ---- ---- ---- M 24x2 28 27 16 X X X X X X X ---- ---- ---- ---- M 16x1.5 16 34 22 X X X X X X X X ---- ---- ---- M 20x2 22 41 27 X X X X X X X X X ---- ---- M 24x2 28 47 32 X X X X X X X X X ---- ---- M 27x2 32 55 40 --- X X X X X X X X ---- ---- M 33x2 40 34 22 X X X X X X X X X ---- ---- M 20x2 22 41 27 X X X X X X X X X X ---- M 24x2 28 47 32 X X X X X X X X X X X M 27x2 32 55 40 --- X X X X X X X X X X M 33x2 40 69 50 --- ---- ---- ---- ---- ---- X X X X X M 39x3 46 84 60 --- ---- ---- ---- ---- ---- X X X X X M 45x3 56 69 50 --- ---- ---- ---- ---- ---- ---- ---- X X X M 39x3 46 84 60 --- ---- ---- ---- ---- ---- ---- ---- X X X M 45x3 56 109 80 --- ---- ---- ---- ---- ---- ---- ---- ---- X X M 56x4 63 134 100 --- ---- ---- ---- ---- ---- ---- ---- ---- X X M 68x4 70 Sizes marked ‘X’ are standard, however other sizes can also be manufactured on request. Dimensions as per IS:8614 - 1977, confirming to ISO 839/1 - 1976 Also manufactured in inch size and as per drawing. Available in Morse Taper Shanks also. 4 d1 L2 Dashmesh Engineering Stub Arbor for Shell End Mill Ø D2 Ø D1 ISO Taper Ø D Holding Screw L1 L2 L ISO Taper 30 40 50 D2 50 63 100 D L2 Max D1 Min 16 17 32 22 19 40 27 21 16 L Holding Screw 120 M8 122 M 10 48 124 M 12 17 32 147 M8 22 19 40 149 M 10 27 21 48 151 M 12 32 24 58 169 M 16 40 27 70 172 M 20 27 21 48 203 M 12 32 24 58 206 M 16 40 27 70 209 M 20 50 30 90 212 M 24 L1 25 25 40 40 Available in Morse & Metric Taper Shank also. All dimensions as per IS:8615 - 1977. Also manufactured in inch sizes. 5 Dashmesh Engineering Stub Arbor For Side & Face Cutter Ø d2 Ø d1 Ød 7/24 Taper wxh Retaining Screw K l1 l2 L Overall Length L 7/24 Taper 30 40 50 d h6 K d2 l2 wxh 30 4 x 2.8 M8 40 6 x 4.4 M 10 Ret. Screw 25 63 16 133 171 -- 28 22 143 181 -- 36 27 163 201 -- 43 60 7x5 M 12 16 158 196 293 28 30 4 x 2.8 M8 22 168 206 303 36 40 6 x 4.4 M 10 27 188 226 323 43 60 7x5 M 12 32 188 226 323 48 60 8x5 M 16 40 188 226 323 56 60 10 x 5.5 M 20 22 207 245 342 36 40 6 x 4.4 M 10 27 227 265 362 43 60 7x5 M 12 32 227 265 362 48 60 8x5 M 16 40 227 265 362 56 60 10 x 5.5 M 20 50 227 265 362 70 60 12 x 5.5 M 24 All dimensions as per IS: 8616 - 1977. Also manufactured in inch sizes. Available in Morse & R8 Taper also. 6 d1 For Collar Length l1 160 8 10 12 50 63 100 Dashmesh Engineering Collet Chuck Gage Plane L 7/24 Taper ØD Stopper Screw Taper Collet L ØD ISO 30 E-40 S & T 90 63 ISO 40 E-40 S & T 60 63 ISO 50 E-40 S & T 55 63 Morse / R8-M1TR E-40 S & T 90 63 All Dimensions in mm. L = Distance from Gage plane to Nut face in locked position. Hook spanner supplied with each adapter. E - 40 S & T implies (S = Schaublin and T = Tail Type). Collets available to suit above Adapters. Also available in ER Series. 7 Dashmesh Engineering Reduction Milling Socket ØD 7/24 Taper Morse Taper L1 L 7/24 Taper Morse Taper D L1 L 1 25 37 105 2 32 50 118 3 40 72 140 1 25 27 120 2 32 32 125 3 40 52 145 4 48 77 170 1 25 33 160 2 32 33 160 3 40 33 160 4 48 53 180 5 65 88 215 3 40 45 251 4 48 45 251 5 65 45 251 6 80 85 291 30 40 50 60 7/24 Taper dimensions as per IS:2340-1972. Morse Taper dimensions as per IS:1715-1973. Available in B-Type and C-Type also. 8 Dashmesh Engineering Side Lock Adapter Shank 30 Shank 50 ØD Ø D1 6 L1 L2 G 20 15 - M6 8 24 15 - 10 30 16 - 12 35 20 - 16 40 23 - 55/70 20/25 50 25 55/70 55/70 32 60 30 55/70 40 70 30 55/70 L1 L2 G 20 15 - M6 8 24 15 - 10 30 16 - 12 35 20 - 16 40 23 - 20 50 95 25 25 50 95 25 ØD Ø D1 6 L 65 L Shank M8 40 M10 L1 L2 min/max G 20 15 - M6 8 24 15 - 10 30 16 - 12 35 20 - 16 40 23 - 20 50 25 55/70 25 50 25 55/70 32 60 30 55/70 40 80 30 55/70 75 105 ØD Ø D1 6 L 65 90 M8 M10 M8 M10 For “WELDON” Type End Mills (DIN 1835). Available in ISO Shanks & Inch sizes also. 9 Dashmesh Engineering Morse Taper Adapter (Tang Type) L Gage Plane ØD Morse Taper Shank 30 40 50 Morse Taper ØD L 1 25 50/120 2 32 65/120 3 40 80/135 1 25 45/120 2 32 60/120 3 40 75/120 4 50 95/165 1 25 45/120/180 2 32 45/135/180 3 40 45/150/180 4 50 75/180 5 70 105 Nomenclature: BT 40 / MTA 2 / 120 BT 40 = Shank Type (Also available in DIN:69871 Taper) MTA 2 =Morse Taper No. 2 Tang Type 120 =Gage Plane Length (L). Gage Plane Length & Morse Taper No. However remain same for ISO Taper. 10 Dashmesh Engineering Morse Taper Adapter (Screw Type) L Gage Plane ØD Morse Taper Screw to Lock MT Shank (or) Special Long Pull Stud. Screw Type Shank Morse Taper ØD L 1 25 50/120 2 32 65/120 3 40 80/135 1 25 45/120 2 32 60/120 3 40 75/120 4 50 95/165 1 25 45/120/180 2 32 45/135/180 3 40 45/150/180 4 50 75/180 5 70 105 30 40 50 Nomenclature: BT 40 / MTB 3 / 75 BT 40 = Shank Type (Also available in DIN:69871 Taper) MTB 3 =Morse Taper No. 3 Screw Type 75 =Gage Plane Length (L). Gage Plane Length & Morse Taper No. However remain same for ISO Taper. Please specify Lock method, with Screw (Supplied) or with Pull Stud (Please order). 11 Dashmesh Engineering Drill Chuck Adapter Jacobs & DIN 238 Taper. Gage Plane L H JT / B # ØD ØC Jacobs Shank 40 JT # L ØD 1 9.754 2 Short 13.94 2 45/90 14.199 33 15.85 6 17.17 3 20.599 ØC H Shank 3 30 JT # ØD ØC 1 9.754 2 Short 13.94 50 2 4 35 L 5 45/105 14.199 33 15.85 6 17.17 3 20.599 3 30 4 35 DIN 238 Shank 40 B# L ØD B6 6.35 B 10 10.095 B 12 45/90 12.065 B 16 15.733 B 18 17.431 Jacobs Taper as per IS: 9094 - 1979. B6 - 18 Taper as per DIN: 238. 12 ØC H Shank 3 30 4 5 50 B# L ØD B6 6.35 B 10 10.095 B 12 45/105 12.065 B 16 15.733 B 18 17.431 ØC H 3 30 H 4 5 5 Dashmesh Engineering Shell End Mill Arbor (SMS) Gage Plane Shank 40 50 ØD L L1 Ø D1 W G 16 60/120 14 34 8 M8 22 60/120 16 42 10 M 10 27 45/105 18 50 12 32 45/75 20 60 16 75/120 14 22 75/120 27 Shank ØD L L1 Ø D1 W G 16 60/120 14 34 8 M8 22 60/120 16 42 10 M 10 M 12 27 60/105 18 50 12 M 12 14 M 16 32 45/75 20 60 14 M 16 34 8 M8 16 42 10 M 10 60/105 18 50 12 M 12 32 45/75 20 60 14 M16 40 45/75 23 70 16 M 20 50 60 26 90 18 M 24 45 Nomenclature: BT 40/SMS/27 - 120 BT 40 = Shank; SMS = Shell End Mill; 27 = Bore dia of Cutter; 120 = Gage plane length. Order Spanners separately. Available in ISO Shanks and Inch sizes also. All dimensions are in mm. Note: Gage plane length is upto Face of dia ‘D1'. 13 Dashmesh Engineering Shoulder Cutter Arbor (FMC) Ø D1 Gage Plane Ø D1 ØD ØD G G W W L L1 L1 L Fig 1 SHANK 40 45 50 Fig 2 D L1 D1 L W G FIG CUTTER Ø 22 18 45 45 / 90 10 M 10 1 50 & 63 27 20 70 45 / 60 / 90 12 M 12 2 80 32 22 85 60 / 75 14 M 16 2 100 22 18 45 45 / 120 10 M 10 1 50 & 63 27 20 70 60 / 120 12 M 12 1 80 32 22 85 60 / 105 14 M 16 1 100 22 18 45 60 / 105 / 150 10 M 10 1 50 & 63 27 20 70 45 / 90 / 150 12 M 12 1 80 32 22 85 45 / 75 / 105 14 M 16 1 100 Nomenclature: BT 40 / FMC 22 / 90 BT 40 = Shank Type (Also available in ISO Taper). FMC = Shoulder Cutter. 22 = Bore Dia of Shoulder Cutter ‘D’. 90 = Gage plane length. Available in ISO shanks also. Note: Gage Plane Length is only upto Face of Dia D1. 14 Gage Plane Dashmesh Engineering Face Mill Arbor (FMB) Gage Plane Ø D1 ØD G W Fig 1 L L1 Gage Plane Ø D1 ØD W G1 ØP G Fig 2 L L1 D L1 D1 L W G G1 P FIG CUTTER Ø 27 26 80 60 / 90 12 M 12 - - 32 26 80 60 / 90 14 M 16 - - 40 26 85 60 / 75 16 M 20 - - 125 27 26 80 45 / 90 / 150 12 M 12 - - 80 32 26 80 60 / 90 14 M 16 - - 40 26 85 45 / 75 / 105 16 M 20 - - 40 F 26 110 75 16 M 20 M 12 66.7 2 160 60 25 140 75 25.4 - M 16 101.6 2 200 - 500 SHANK 40 50 Nomenclature: BT 40 / FMB / 32 / 60 BT 40 = Shank Type (Also available in ISO Taper). FMB = Face Mill. 32 = Bore Dia of Face Mill ‘D’. 60 = Gage plane length. Available in ISO / TC shanks also. Spanners to be ordered separately. Note: Gage Plane Length is only upto Face of Dia D1. 80 1 1 100 100 125 Dashmesh Engineering Side & Face Mill Arbor (Stub Arbor) SCA ØC Gage Plane G A/F W ØD 30 L H Shank 40 45 ØD L H A/F C W G 13 75/105 120/150 17 20 - M12x1.25 16 75/105 121/151 23 26 4 M14x1.5 22 75/120 126/171 29 34 6 M20x1.5 27 75/120 130/175 32 40 7 M24x2.0 32 90 150 41 46 8 M30x2.0 13 75/105 120/150 17 20 - M12x1.25 16 90/120 136/166 23 26 4 M14x1.5 141/186 29 34 6 M20x1.5 145/190 32 40 7 M24x2.0 150/195 41 46 8 M30x2.0 22 27 90/135 32 50 13 75/105 120/150 17 20 - M12x1.25 16 90/120 136/166 23 26 4 M14x1.5 144/186 29 34 6 M20x1.5 145/190 32 40 7 M24x2.0 32 150/195 41 46 8 M30x2.0 40 156/201 46 55 10 M36x3.0 22 27 90/135 Nomenclature : BT 40 / SCA / 32 / 135 BT 40 = Shank.SCA = Side & Face Cutter. 32 = Bore dia of Cutter.135 = Length from Gage Plane. Also available in ISO Taper Shanks and Inch sizes . All dimensions in mm. Note: Gage Plane Length is only upto the Face of dia ‘C’. 15 Dashmesh Engineering Rough Boring Bar Angular Mounting (BSA) Gage Plane Gage Plane Shank 40 45 16 Ø D Min Ø D Max L C W G E 25 38 135 20 8 M6 1.0 30 42 150 24 8 M6 1.6 38 52 165 30 10 M8 2.6 50 65 165/210 40 12 62 90 165/225 50 72 110 165/225 60 90 125 165/210 75 25 38 135 20 30 42 165 24 38 52 180 30 42 56 210 34 50 65 180/225 40 62 90 195/270 50 72 110 195/285 60 90 125 195/285 75 3.0 M10 16 8 2.0 2.4 M12 4.0 M6 1.0 1.6 10 M8 2.6 2.0 12 3.0 M10 16 2.0 2.4 M12 4.0 Dashmesh Engineering Rough Boring Bar Angular Mounting (BSA) Gage Plane Gage Plane Shank 50 Ø D Min Ø D Max L C W G E 25 38 135 20 8 M6 1.0 30 42 165 24 38 52 180 30 42 56 210 34 50 65 180/240 40 62 90 195/270 50 72 110 195/285 60 90 125 210/300 75 105 160 195/285 90 130 190 255 110 1.6 10 M8 2.6 2.0 12 3.0 M10 2.0 2.4 16 4.0 M12 3.0 6.0 Driving Slot and Tool are in same plane. L & E correspond to D Minimum. Boring Bar supplied without Tool / Cartridge. Also same sizes available for Micro (Fine) Boring (BCA) & Rough Boring Square Mounting (BSB). 17 Dashmesh Engineering Collet Chuck L Gage Plane ØD Stopper Screw Shank Collet Type L ER 16 30 ER 20 50 28 70 34 ER 32 50 ER 16 28 ER 20 40 ØD 70 34 ER 25 42 ER 32 50 ER 40 80 63 ER 32 100 50 ER 40 80 63 ER 50 100 78 Nomenclature: BT 40 / 70 / ER 40 BT-40 = Shank; 70 = Gage Plane Length; ER 40 = Collet Type. Also available for collets like, M - Series; E - Series; Double Angle, TG - Series etc. Collet chucks are offered with nut and hook spanner. Available in ISO Taper Shanks also. 19 Dashmesh Engineering Pull Studs Ød 2 Ød 2 L1 L1 L Ød 2 L1 L L G G G ØD ØD ØD Fig-1 Fig-2 Fig-3 Fig - 2 DIN:69872 Fig - 1 MAS-403 Shank G L L1 D è d Shank G L L1 D è d 30 M12 43 23 16.5 45 / 60 - 30 M12 44 24 13 15 - 40 M16 60 35 23 45 / 60 / 90 - 40 M16 54 26 17 15 7.5 45 M20 70 40 31 45 / 60 / 90 - 45 M20 65 30 21 15 9.5 50 M24 85 45 38 45 / 60 / 90 - 50 M24 74 34 25 15 11.5 ISO 7388/2 Shank G L L1 D è d 40 M16 44.5 16.4 22.5 45 / 60 7.5 45 M20 56 20.95 30 45 / 60 9.5 50 M24 65.5 25.55 37 45 / 60 11.5 Also available as Per JIS:B6339, ANSI, CAT, OTT etc. with & without thru’ coolant. 20 Dashmesh Engineering Running Bush r b Ø D g6 L ± 0.1 Ød H7 a C11 b Ø d H7 r D L D L D L D L D L D L D L Max 42 60 48 70 56 80 70 100 85 120 110 140 140 160 16 4 17.7 +0.1 0.5 X X X X X X 22 6 24.1 0 1.0 X X X X X X X X X X 27 7 29.8 X X X X X X X X X X 32 8 34.8 X X X X X X X X 40 10 43.5 X X X X X X 50 12 53.5 +0.2 X X X X 60 14 64.2 0 80 18 85.5 2.0 100 25 107 2.5 1.2 1.6 y 0.05 X X X X X X 0.08 X Parallelism of Faces, t 0.004 0.005 0.006 Concentricity, Z 0.008 0.010 0.012 X Items marked ‘X’ are standard sizes, however other sizes can be made on request. All dimensions are in mm & as per IS: 8619 - 1977 confirming to ISO 839/II - 1977. Available in inch sizes also. 21 Dashmesh Engineering Spacers Ø d 16 22 27 32 40 50 60 80 100 Ø D1 h11 for L$10 27 34 41 47 55 69 84 109 134 Ø D2 h11 for L<10 26 33 40 46 54 68 83 -- -- 4 6 7 8 10 12 14 18 25 17.7 24.1 29.8 34.8 43.5 53.5 64.2 85.5 107 a C11 C11 b Tolerance on b r Max c +0.1 0 +0.2 0 0.6 1 1.2 1.2 1.2 1.6 1.6 2 2 .5 0.4 0.4 0.4 0.6 0.6 0.6 0.6 1 1 z 0.05 0.08 1, 2, 3, 6 10 -20 L ± 0.1 30 -- 60 -- t Parallelism of faces 100 0.004 * Recess only for L š 60mm. All Dimensions in mm and as per IS:8618 - 1977. Available in Inch sizes also. 22 0.005 0.006 Dashmesh Engineering MORSE TAPER COLLET CHUCK ØD Morse Taper L1 L COLLET E - 45:- COLLET E - 40 & ER - 40: TAPER ØD L1 L TAPER ØD L1 L 2 63 74 146 2 71 80 152 3 63 74 165 3 71 80 171 4 63 74 190 4 71 80 196 5 63 70 226 5 71 70 226 6 63 42 260 6 71 42 260 Ordering Nomenclature : MT-3 x E-40. The dimensions remain same for Screw Type, except Dim L. Morse Taper will have Cotter Pin Slot. Spanned included in Standard Supply 23 Dashmesh Engineering R8 / M1TR Collet Chuck Ø 48 8°25'30" ØD Ø 24.1 l L Taper R8 / M1TR Collet ØD E / ER 32 50 E / ER 40 63 E / ER 50 78 Collet adapter supplied with Hook Spanner. Available for collets of customers choice against request. 24 l L 76 176 Dashmesh Engineering Reduction Milling Socket R8 / M1TR Taper. L1 2 8°25'30" ØD Ø 24.1 78 24 L Morse Taper ØD L L1 1 32 114 14 2 32 114 14 3 36 174 74 L1 = Distance from Gage Plane, based on our own design. Morse Taper dimensions as per IS:1715-1973. 25 Dashmesh Engineering R8 / M1TR Stub Arbor Ø d1 8°25'30" Ød Ø 24.1 l1 l L Taper R8 / M1TR Ød l Ø d1 16 17 32 22 19 40 27 21 48 R8 Taper Standard. Gage Gap 2mm. “Ød” & “l” Dimensions as per IS:8615 - 1977. Also manufactured in “INCH” sizes. 26 l1 L 144 25 146 148 Dashmesh Engineering Drill Sleeve IS:6702 - 1972 ØD L OD 2 3 3 4 4 4 5 5 5 6 6 6 ID 1 1 2 1 2 3 2 3 4 3 4 5 ØD 18.6 24.1 24.8 31.6 31.6 32.3 44.7 44.7 45.4 63.8 63.8 63.8 L 91 98 111 123 123 139 155 155 170 217 217 217 Morse Taper dimensions as per IS:1715-1973. Case Hardened and Ground 56/58 HRc. 27 Dashmesh Engineering EXTENSION SOCKET IS : 6692-1972 ØD L1 L2 Outer MT 1 1 2 2 2 3 3 3 3 Inner MT 1 2 1 2 3 1 2 3 4 ØD 20 30 20 30 36 20 30 36 48 L- 1 76 91 76 91 112 76 91 112 137 L- 2 145 160 160 175 196 175 194 215 240 Outer MT 4 4 4 4 4 5 5 5 5 5 Inner MT 1 2 3 4 5 1 2 3 4 5 ØD 20 30 36 48 63 20 30 36 48 63 L- 1 76 91 112 137 172 76 91 112 137 172 L- 2 200 215 240 265 300 232 247 268 300 335 Ordering Nomenclature : ES-23 (Extension Socket Outer MT-2 x Inner MT-3) 28 Dashmesh Engineering Micro Boring Bars Fig 1 Fig 2 Fig 3 29 Dashmesh Engineering Micro Boring Bars Taper Shank Boring Bar Ø D Boring Range L C1 C2 12.7 - 105 12.7 - 15 105 - 12.5 165 44 105 - 165 44 105 - 165 44 120 - 180 44 135 - 195 44 150 - 195 55 150 - 35 210 55 37 172 150 - 41 115 225 55 44 182 165 - 51 133 225 - 57 185 165 - 63 - 225 - 165 - 12.7 - 165 14.5 - 105 14.5 - 17 14.5 - 165 16 - 105 16 - 22.5 16 - 165 19 - 120 19 - 23 19 - 180 23 - 135 23 - 29 23 - 195 29 - 150 40 29 - 41 29 - 195 38 - 150 38 - 49 38 - 210 46 - 150 46 - 66 46 - 225 62 - 165 62 - 87 62 - 225 83 - 165 83 - 108 83 - 225 98 - 165 98 - 142 Note: Drive Slot & Tool are in Same Plane. ‘L’ & ‘L1" Show size at ‘D’ Min. 30 L1 Microbore Unit Fig #. M1 S2 Approx Wt. 1.5 67 2.0 14 1.5 2.0 15 73 M1 L2 1.5 2.0 18 86 M2 S2 1.5 1 22 105 M3 S2 2.0 1.5 2.0 28 M3 L2 1.5 115 2.0 M5 S2 1.5 2.5 M5 L2 2.5 3.0 M7 L2 2 3.5 1 4.5 2 4.5 83 - 6.0 M10 L2 3 6.0 Dashmesh Engineering Micro Boring Bars Taper Shank Boring Bar Ø D Boring Range L 12.7 - 120 12.7 - 15 120 12.7 - 195 14.5 - 120 14.5 - 17 16 - 22.5 19 - 23 50 23 - 29 29 - 41 38 - 49 46 - 66 46 - 225 62 - 180 62 - 87 62 - 240 83 - 165 83 - 108 83 - 240 98 - 165 98 - 142 98 - 240 132 - 210 132 - 176 132 - 315 166 - 225 166 - 210 166 - 315 200 - 210 M1 S2 200 - 244 Approx Wt. 4 67 5 14 4 5 120 15 73 M1 L2 4 44 135 5 18 86 M2 S2 4 1 150 22 105 M3 S2 5 4 5 165 28 225 38 - 225 46 - 165 Fig #. 225 29 - 225 38 - 165 Microbore Unit 210 23 - 225 29 - 165 12.5 120 195 19 - 210 23 - 150 L1 195 16 - 195 19 - 135 C2 195 14.5 - 195 16 - 120 C1 M3 L2 4.5 115 165 - 35 225 55 37 172 165 - 41 115 225 55 44 182 180 - 51 137 240 - 57 184 165 - 63 122 240 - 70 190 165 - 83 122 240 - 210 - 315 - 225 - 315 - 210 - 5.5 M5 S2 4.5 5.5 M5 L2 5 5.5 M7 L2 2 6 1 7 1 6.5 9 2 197 11.5 108 12 M10 L2 142 8.5 - 18.5 3 13 18.5 176 20 31 DASHMESH ENGINEERING # 255, 8th Cross, 4th Phase Peenya Industrial Area Bangalore – 560 058. INDIA Telephone : 080-28397330, 28392371 Fax : 91-80-51179160 E-mail : [email protected] COMPANY–PROFILE Mr. Pritam Singh Mogewala established a Small Scale Industry in the eve of 1979 at Bangalore, the cradle of Machine Tool building in India. In 1981 we moved to our own premises at Peenya (Bangalore) Asia’s largest Industrial complex. With a humble beginning, having started with a small area of 750 Sq. Ft, today we cover nearly 8000 Sq. Ft. space. We started with manufacturing of Long Milling Arbors as OEM suppliers to reputed Milling Machine builders in India. With his hard work and Mr. Pritam Singh Mogewala sincerity he developed the “DASHMESH” brand to be synonym with quality and precision. Today, apart from manufacture of Long Milling Arbors & Hob Arbors, we are also into CNC Toolings, Main Spindles, Splined Shafts, Draw-Bars etc., & Heavy Parts like Column, Saddle, Cross Slide, HeadStock for Milling Machines, VMC’s, HMC’s and CNC Lathes. Few of our Products We are India’s largest manufacturers of Long & Stub Milling arbors and have the reputation of being second to none, and are exporting to highly quality conscious markets in North America, Europe, Singapore & Japan. We have an impressive list of OEM customers like BFW, BATLIBOI, LMW, AMS, ACE DESIGNERS etc., and among our Mitsubishi MPA 80A HMC Overseas OEM’s we have MAKINO, WMW, & DMG. Apart from this our end users include the best from Automotive, Aeronautics – Aerospace and Defence sector. After a decade of operations at the existing facility, we were again cramped for space and in 1994 we added an additional facility having 5000 square feet of space as our Unit-II equipped with latest CNC Machines and Digital measuring Warner & Swasey WSU-12 Universal Turning Center instruments. We have installation of highly acclaimed Mother Machines like MITSUBISHI Horizontal Machining Center, WARNER & SWASEY Universal Turning Center, BFW Vertical & Horizontal Milling Machines, HMT Center Lathes, HMT Cylindrical & Universal Grinders, FRITZ WERNER Spline Grinder, TOS Surface Grinder, COOPER Slotting Machine and supporting machines like Bench Drills, 2-D Pantograph, Bench Grinders, Power Hacksaw, Tool & Cutter Grinder. Dashmesh Engineering Bangalore -58 Machinery - List • CNC HORIZONTAL MACHINING CENTER MITSUBISHI DIAMATIC MPA 80 A Table:Pallet = 1000 x 1000mm Twin. Index = 360 x 1° min. Loading Capacity = 2000Kg. Max. each Pallet. X-axis Travel for Table:Total Travel = 1500mm. From Spindle Centre = " 750mm. Y-axis Travel for Table:Total Travel = 1000mm. Above Table = 0 - 1000mm. Z-axis Travel for Column:Total Travel = 800mm. Between Spindle & Table Centre = 350 - 1150mm. ATC:- 60 Tools Magazine. CNC System:Fanuc 6M model B. Spindle Nose Taper:BT-50 (7/24 Taper) JIS B6101 No.50. Speed 20 – 2000 RPM Infinitely Variable. • CNC UNIVERSAL TURNING CENTER MIVEN WARNER & SWASEY WSU – 12. Main Spindle = A2 – 8. Chuck Size = Ø 315mm Hollow Hyd. Actuation. Max. Turning Dia between Centers = Ø 380mm. Max. Turning Dia Chucking = Ø 660mm. Max. Turning Length = 1000mm. Spindle Speed Range = 30 - 3000rpm Infinitely Variable. Spindle Power Rating = 18.5/22 kW. Rapid Traverse = 12 M/min. Turret = 12 Station W & S Drum Type. Tail Stock = MT-4 Programmable. CNC System = Fanuc Oi TA Color Display with AC unit. Steady Rest = 30 - 150mm Hydraulic. Dashmesh Engineering Bangalore -58 • Centre Lathe HMT H – 22 / 1000 = 2 Nos. HMT VIKRAM / 1500 = 1 No. HMT L – 22 / 1000 = 1 No. VINOD / 4.5 Ft = 1 No. • Milling BFW VF – 2 = 1 No. BFW UF – 1 = 1 No. • Slotting COOPER CH – 25 = 1 No. (Stroke length 250mm with Rotary Index Table) • Surface Grinding TOS 600 x 200 HORIZONTAL = 1 No. • Cylindrical Grinding HMT K – 130 / 800 U = 1 No. HMT G – 13 / 500 = 1 No. • Spline Grinding Fritz Werner 3.275/1.2 = 1 No. (Max. Length 1000mm Spline Shaft) • 2 – D Pantograph F.I.E. Denmark = 1 No. • Bench Drilling TOOL CRAFT = 1 No. JAYESH = 1 No. • Tool & Cutter Grinder AMBASANA 225 x 150 U = 1 No. • Power Hacksaw VEEKAY Ø 175mm Capacity = 1 No. VEEKAY Ø 200mm Capacity = 1 No. • Bench Grinder ELMACO = 2 Nos. DASHMESH ENGINEERING Bangalore – 560 058. Measuring Instruments • Vernier Calipers 0 - 200 = 3 Nos. 0 - 200 = 1 No 0 - 300 = 1 No 0 - 150 = 1 No 0 - 300 = 2 Nos. 0 - 200 = 1 No. 0 - 1000 = 1 No. • Micrometers 0 - 25 0 - 25 25 - 50 50 - 75 75 - 100 100 - 125 150 - 300 • = 1 No. = 3 Nos. = 3 Nos. = 2 Nos. = 1 No = 1 No = 1 No Mitutoyo Digital Mitutoyo Mitutoyo Mitutoyo Mitutoyo Mitutoyo Mitutoyo Internal Micrometers 3-Point 12 – 20 20 – 50 50 – 100 • Mitutoyo Mitutoyo Digital Baker Digital JIS Digital Mitutoyo Depth Vernier Mitutoyo Mitutoyo = 1 Set Mitutoyo = 1 Set Mitutoyo = 2 Sets Mitutoyo Bore dial Gage 10 - 18mm = 2 Set Mitutoyo 18 - 35mm = 2 Set Mitutoyo 35 - 60mm = 1 Set Mitutoyo 50 - 150mm = 2 Set Mitutoyo • Height Gage 0 – 300 = 1No • Mitutoyo Dial Gages 0.001 = 1 No. 0.01 = 3 Nos. 0.001 = 3 Nos. 0.01 = 1 No 0.002 = 1No 0.01 = 1 No. Mahr Millimess Mitutoyo - Plunger Type Mitutoyo - Plunger Type Baker - Lever Type Mitutoyo - Lever Type Mitutoyo - Lever Type DASHMESH ENGINEERING Bangalore – 560 058. • Bevel Protractor "VIS" Poland = 1 No "Mitutoyo" Japan = 1 No • Thread Plug Gages M M M M M M • - 06 10 12 16 24 30 = = = = = = 2 2 2 2 2 2 Nos. Nos. Nos. Nos. Nos. Nos. Accurate/HIP Accurate/HIP Accurate/HIP Accurate/HIP Accurate/HIP Accurate/HIP Ring Gages ISO – 30 7/24 = 1 No Self ISO – 35 7/24 = 1 No Self ISO – 40 7/24 = 1 No Self ISO – 45 7/24 = 1 No Self ISO – 50 7/24 = 1 No Sonalkar ISO – 60 7/24 = 1 No Sonalkar M1TR / R8 = 1 no Self MT – 1 / 2 / 3 / 4 / 5 / 6 = 1 No Each Self Ø 16 - Ø 50 = 1 No Each "Accurate" E - 40 Schaublin Collet Gage = 1 No Self E - 40 Tail Type Collet Gage = 1 No Self E - 32 Collet Gage = 1 No Self • Plug Gages ISO – 30 7/24 = 1 No Self ISO – 35 7/24 = 1 No Self ISO – 40 7/24 = 1 No Self ISO – 45 7/24 = 1 No Self ISO – 50 7/24 = 1 No Self ISO – 60 7/24 = 1 No Self MT - 1/2/3/4/5/6 = 1 No Each Self 1/16 Taper = 1 No Self E - 40 Schaublin Collet Gage = 1 No Self E - 32 Collet Gage = 1 No Self ER - 40 Collet Gage = 1 No Self E – 40 Tail Collet Gage = 1 No. Self Metric 80 = 1No Self Ø 5 - Ø50mm - 1 No Each "Accurate" & "HIP" • Sine Bar 100mm Long = 1 No DASHMESH ENGINEERING Bangalore – 560 058. • Slip Gage USSR Make = 1 No "Matrex" Indian = 1 No • Hardness Tester "Fine" Make = 1 No • Concentricity Tester Self-made = 1 No. • Test Mandrels ISO-40 Ø 30 x 300 = 1 No. Run-Out 0.002mm. Self made. SK-40 Ø 30 x 300 = 1 No. Run-Out 0.002mm. Self made. BT-40 Ø 30 x 300 = 1 No. Run-Out 0.002mm. Self made. ISO-50 Ø 40 x 300 = 1 No. Run-Out 0.002mm. Self made. SK-50 Ø 40 x 300 = 1 No. Run-Out 0.002mm. Self made. BT-50 Ø 40 x 300 = 1 No. Run-Out 0.002mm. Self made. Mores Taper Test Mandrels MT-2/3/4/5/6 = 1 No each Run-Out 0.002mm, Self Made. • Granite Table 600 x 600 = 1 No " VTG" 1600 x 1200 x 200 = 1 No. “MMT” -- * -- * -- * -- Dashmesh Engineering Bangalore - 560058. CUSTOMER LIST 1. M/s. BHARAT FRITZ WERNER LIMITED, BANGALORE. 2. M/s. BATLIBOI LIMITED, UDHNA. 3. M/s. WMW MACHINERY INC., NEW YORK, USA. 4. M/s. LAKSHMI MACHINE WORKS LIMITED, COIMBATORE. 5. M/s. BATLIBOI SPM’s LIMITED, BANGALORE. 6. M/s. DECKEL MAHO GILDEMEISTER (INDIA) LIMITED, BANGALORE. 7. M/s. MAKINO ASIA LIMITED, BANGALORE. 8. M/s. ACE DESIGNERS LIMITED, BANGALORE. 9. M/s. ACE MANUFACTURING SYSTEMS LIMITED, BANGALORE. 10. M/s. MIVEN MACHINE TOOLS LIMITED, HUBLI, KARNATAKA. 11. M/s. ELGI EQUIPMENTS LIMITED, COIMBATORE. 12. M/s. L & T DEMAG PLASTIC MACHINERY LIMITED, CHENNAI. Dashmesh Engineering Bangalore - 560058. PRODUCTS 1. MAIN SPINDLES for Milling Machines, Vertical & Horizontal Machining Centers, CNC Lathes and Special Purpose Machines. 2. TOOL HOLDERS like Long & Stub Milling arbors, Hob Arbors, CNC Toolings, Milling Sockets, ATC Alignment Fixtures, Drawbars, Test Mandrels and other special machine tool accessories. Dashmesh Engineering Bangalore - 560058. 3. Heavy Parts for VMC, HMC & CNC Lathes. Saddle of ACE Designers CNC Lathe Column of HOWA HMC Column of AMS VMC Cross Slide of Warner & Swasey CNC Lathe Contact POST: - DASHMESH ENGINEERING D-423, 10th MAIN, 2nd STAGE, PEENYA INDISTRIAL ESTATE, BANGALORE – 560058. KARNATAKA INDIA PHONES: Land Phones = 00-91-80-28397330 / 28392371 / 28360769 Hand Phone = 0094483-65962 Facsimile = 00-91-80-41179160 E-MAIL: 1) [email protected] 2) [email protected] DIRECTIONS: From Bangalore drive down NH-4 towards Pune. (Approx. 11Kms from City Railway Stn.) At Jalahalli Cross take left to enter Peenya Industrial Area. (Traffic Junction with Signals) Continue for Approx. 1Km to reach TVS Cross. (Traffic Junction with Signals) Here take Right Turn and continue for Approx. 1KM towards NTTF Cross. At NTTF Cross turn Left towards Peenya II Stage, and take immediate left on 8th Cross. As you enter 8th Cross, the LEFT CORNER is your Destination.
Similar documents
MACTURN250/350 Multifunction machines
The M-spindle motor provides full-power from the low to the high speed range for robust live-tool machining.
More information