driveline - Custom Chrome

8mm
42874
43022
Gates HTD Replacement Primary Drive Belts
A wide selection of replacement primary drive belts to fit most belt drive units on the market
today. All belts, whether HTD Rubber belts or HTD Poly Chain belts, are manufactured by the Gates
Rubber Company. All CC replacement belts are listed showing their pitch, construction, width,
number of teeth, and their most common applications.
HTD and Poly Chain are registered trademarks of the Gates Rubber Company.
Note: The belts offered for sale on this page have no warranty whatsoever.
DRIVELINE
13.8mm
12
13.8mm Gates HTD Poly Chain Primary
Belts
43041
1-1/2"-wide, 78-teeth. Fits all Karata
HTD belt drives for Big Twins from
36-E84 with 4-speed trans-mission,
open or closed primaries, and kick or
electric start
11mm
11mm Gates HTD Rubber Primary Belts
42517
1-1/2"-wide, 92-teeth. Fits CC belt drive
kit #42589
43037
1-1/2"-wide, 96-teeth. Replaces belt
#30884 for Big Twins from 36-E84
with open or closed primaries, kick or
electric start, and either 29/44-tooth or
28/44-tooth pulley combinations
43038
1-1/2"-wide, 99-teeth. Replaces #1185
belt for Big Twins from 36-E84 with
open or closed primaries, kick or electric start, newer-style combinations
with a 31/47-tooth pulley combination.
Replacement belt for CC belt drive kits
#42585, 42586, 42587, and 42588
14mm
14mm Gates HTD Rubber Primary Belts
43039
1 1/2"-wide, 78-teeth. Replaces #38078
belt for all Big Twin applications with a
24/37-tooth pulley combination using the
Primo idler system
Replacement Kevlar Primary Drive Belts by BDL
A selection of primary drive belts to fit BDL ‘Bolt-In’ and Primo ‘Brute III’ belt drive kits.
42873
Primary belt 8 mm x 42mm, 130-teeth for rubber-mount applications (except Dyna Glide models). Fits CC belt drive kits #42670, 42671, 42672, 42673 and Primo Brute III belt drives for FXR,
FLT, FLHT, FLHS and Road King models with 68-tooth rear and 48-tooth front pulleys
42874
Primary belt 8,07 mm x 41mm, 138-teeth for Softail and Dyna Glide applications. Fits CC belt
drive kits #42518, 42519, 42520, 42674 and Primo Brute III belt drives for Softail and Dyna
Glide models with 68-tooth rear and 45-tooth front pulleys.
42875
38mm-wide, 8mm, 138-teeth. Fits CC belt drive kit #42521 with 68-tooth rear and 45-tooth
front pulleys
12.14
8mm Gates HTD Rubber Primary Belts
43030
1-1/2"-wide, 117-teeth. Fits all Karata
HTD belt drives for Sportster models from 71-81 with kick or electric
start. Also replaces belt #37117-1 for
Sportster applications with 45/76tooth pulleys
43032
'ST',1-1/2"-wide, 132-teeth. Fits all
Karata HTD belt drives for Big Twins
with closed primaries, and kick or electric start from 36-E84. Also re-places
belt #30853-1-ST. Replacement belt for
CC belt drive #42524
43033
1-1/2"-wide (Bullseye) belt, 132-teeth.
Fits all Karata HTD belt drives with tin
primaries, and replaces belt #30853-2BE for Big Twins with closed primary,
and kick or electric start from 36-E84.
Also replaces Phase III Bullseye belt.
Replacement belt for CC belt drive
kits #42525, 42526, 42527, 42528,
42529 and 42530 (+.050")
43034
1-1/2"-wide, 144-teeth. Replaces belt
#37144-1 for Big Twins from 36-E84
with open or tin primaries, and 47/76tooth pulleys. Also replaces Phase III
applications
42514
1-5/8"-wide, 141-teeth. Fits CC belt
drive kit #42509
42511
1-3/4"-wide, 132-teeth
42512
1-3/4"-wide, 141-teeth
43035
2"-wide, 144-teeth. Replaces #37144-2
belt for Big Twins from 36-E84 with
open primaries and 47/76-tooth pulleys.
42515
3"-wide, 141-teeth. Fits CC belt drive
kits #42536, 42537 and 42542
43036
3"-wide, 144-teeth. Fits all Karata HTD
belt drives for Big Twins from 36-E84
with open primaries. Also replaces
belt #37144-3 and Phase III applications. Replacement belt for CC belt
drive kits #42533 and 42534
070970 135 tooth. Fits Brute IV on FXR and
FLT models from 90-06
Dayco ‘Panther’ 3" Primary Belts
Fit 3"-wide, 8 mm open belt drives in racing
applications ONLY.
42755
144-teeth
42757
130-teeth