docHumbrol A2
download 
Report Transcription
Humbrol A2
HUMBROL PAINT COLOURS Revell Ref. No. Buying a model kit is only the start of a pastime enjoyed by millions the world over. 1 23 24 25 26 27 28 29 GREY PRIMER DUCK EGG BLUE TRAINER YELLOW BLUE KHAKI SEA GREY CAMOUFLAGE GREY DARK EARTH 30 31 32 33 34 49 60 61 DARK GREEN SLATE GREY DARK GREY BLACK WHITE VARNISH SCARLET FLESH 62 63 64 65 66 67 70 72 LEATHER SAND LIGHT GREY AIRCRAFT BLUE OLIVE DRAB TANK GREY BRICK RED KHAKI DRILL Generations of modellers, from beginner to experienced professional, have turned to Humbrol products to help them construct and decorate their models to make them works to be proud of. Humbrol have been producing paints, 74 75 76 77 78 79 80 WINE LINEN BRONZE GREEN UNIFORM GREEN NAVY BLUE COCKPIT GREEN BLUE GREY GRASS GREEN varnishes, brushes and other products to enable 81 82 83 84 86 87 88 89 you to get the best results out of your PALE YELLOW ORANGE LINING OCHRE MID STONE LIGHT OLIVE STEEL GREY DECK GREEN MIDDLE BLUE and as well as the famous Enamel product in the iconic Humbrol tinlet, the range includes glues, for use with their plastic model kits. 90 91 93 94 96 98 99 100 BEIGE GREEN BLACK GREEN DESERT YELLOW BROWN YELLOW RAF BLUE CHOCOLATE LEMON RED BROWN 101 102 103 104 105 106 109 110 MID GREEN ARMY GREEN CREAM OXFORD BLUE MARINE GREEN OCEAN GREY WWI BLUE NATURAL WOOD 113 116 117 118 119 120 121 140 RUST US DARK GREEN US LIGHT GREEN US TAN LIGHT EARTH LIGHT GREEN PALE STONE GULL GREY 144 145 147 148 149 150 153 154 INTERMEDIATE BLUE MEDIUM GREY LIGHT GREY RADOME TAN DARK GREEN FOREST GREEN INSIGNIA RED INSIGNIA YELLOW Visit Humbrol at: www.humbrol.com www.airfix.com ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ 35 49 22 34 21 33 85 41 69 24 Revell Ref. No. 16 30 31 35 36 37 45 47 48 51 Humbrol Ref. No. Revell Ref. No. ........ 94 ........ 18 ........ 19 ........ 61 ........ 60 ........ 70 ........ 86 ........ 106 ........ 88 ........ 48 52 53 55 56 57 66 67 71 75 77 Humbrol Ref. No. ........ 14 ........ 68 ........ 65 ........ 25 ........ 106 ........ 66 ........ 91 ........ 112 ........ 64 ........ 79 Revell Ref. No. 78 79 81 85 86 87 88 90 93 94 Humbrol Ref. No. ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ Revell Ref. No. Humbrol Ref. No. 95 ........ 55 96 ........ 51 97 ........ 50 98 ........ 52 99 ........ 56 99 ........ 56 301 ........ 130 302 ........ 85 311 ........ 24 314 ........ 94 67 92 10 62 26 29 94 11 54 16 Revell Ref. No. Humbrol Ref. No. 330 ........ 60 361 ........ 105 363 ........ 195 364 ........ 101 371 ........ 196 374 ........ 128 382 ........ 118 378 ........ 79 382 ........ 118 R.A.L. Humbrol Ref. No. R.A.L. Ref. No. 2004 ....... 18 3000 ....... 19 3004 ....... 20 3026 ....... 209 Humbrol Ref. No. R.A.L. Ref. No. 6003 ....... 117 6020 ....... 195 7000 ....... 145 7009 ....... 91 Humbrol Ref. No. R.A.L. Ref. No. Humbrol Ref. No. 8023 ....... 9001 ....... 9005 ....... 9005 ....... 7012 ....... 79 7031 ....... 27 7035 ....... 196 8017 ....... 10 R.A.L. Ref. No. Humbrol Ref. No. 9010 ....... 22 9010 ....... 130 9011 ....... 33 62 34 21 85 GUNZE SANGYO modelling experience. Humbrol products are recommended by Airfix 1 2 4 5 7 8 9 10 12 15 Humbrol Ref. No. R.A.L. Ref. No. 73 adhesives and other products for over 50 years CONVERSION TABLES REVELL Gunze Sangyo Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 22 21 19 69 15 3 10 11 16 12 34 33 73 18 14 38 Gunze Sangyo Ref. No. 17 19 20 22 23 25 26 27 28 30 31 36 37 39 42 43 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 10 200 49 5 60 48 2 9 201 35 90 75 10 68 144 20 44 45 46 50 52 53 55 56 57 61 64 66 67 68 71 72 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 61 47 2 38 155 128 15 144 147 146 116 62 65 27 84 29 73 74 75 76 78 79 81 87 88 89 98 301 302 303 304 305 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 30 23 27 53 66 93 26 51 52 50 209 32 149 117 155 125 306 307 308 309 310 311 312 313 314 316 317 318 320 325 327 330 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 126 128 127 116 119 28 120 121 122 22 140 148 30 129 153 163 331 332 333 334 335 337 338 340 343 344 346 Humbrol Ref. No. Testor Ref. No. 164 166 123 167 123 145 147 105 33 113 93 TESTOR 155 157 159 160 171 186 187 224 OLIVE DRAB AZURE BLUE KHAKI DRAB GERMAN CAMOUFLAGE RED BROWN ANTIQUE BRONZE BROWN DARK STONE DARK SLATE GREY 230 225 226 250 PRU BLUE MIDDLE STONE INTERIOR GREEN DESERT SAND MATT Testor Ref. No. 1501 1502 1503 1508 1511 1514 1524 1527 1540 Humbrol Ref. No. ...... ...... ...... ...... ...... ...... ...... ...... ...... PAINTS AND ACCESSORIES 1551 1569 1582 1583 1701 1704 1705 1706 1707 ...... 12 ...... 24 ...... 54 ...... 33 ...... 186 ...... 187 ...... 153 ...... 63 ...... 191 1708 1709 1710 1711 1712 1713 1714 1716 1720 ...... 154 ...... 148 ...... 116 ...... 155 ...... 105 ...... 117 ...... 150 ...... 120 ...... 144 1721 1723 1725 1728 1730 1732 1733 1735 1736 ...... 145 ...... 125 ...... 126 ...... 127 ...... 129 ...... 147 ...... 28 ...... 63 ...... 62 1740 1741 1742 1744 1745 1747 1749 1764 1768 ...... 140 ...... 128 ...... 118 ...... 16 ...... 22 ...... 21 ...... 33 ...... 149 ...... 34 1781 2702 2709 2713 2715 2734 Humbrol Ref. No. ...... 56 ...... 52 ...... 41 ...... 201 ...... 14 ...... 11 LIFECOLOR BS 381C 636 Lifecolor Ref. No. 71 85 123 125 126 127 128 129 OAK COAL BLACK EXTRA DARK SEA GREY US DARK GREY US MEDIUM GREY US GHOST GREY US COMPASS GREY US GULL GREY 130 131 132 133 135 156 163 164 WHITE MID GREEN RED BROWN VARNISH DARK CAMOUFLAGE GREY DARK GREEN DARK SEA GREY 168 165 166 167 174 195 196 HEMP MEDIUM SEA GREY LIGHT AIRCRAFT GREY RAF BARLEY GREY SIGNAL RED DARK GREEN LIGHT GREY SATIN 20 51 19 47 15 69 2 18 10 Testor Ref. No. LC01 LC02 LC06 LC08 LC16 LC10 LC21 LC22 LC35 LC36 LC37 LC39 LC51 LC52 Humbrol Ref. No. ..... 34 ..... 33 ..... 60 ..... 48 ..... 133 ..... 25 ..... 61 ..... 192 ..... 189 ..... 62 ..... 10 ..... 78 ..... 22 ..... 21 Lifecolor Humbrol Ref. No. Ref. No. LC53 LC55 LC56 LC65 LC60 LC66 LC67 LC74 LC75 LC76 UA001 UA002 UA003 UA004 ..... 69 ..... 18 ..... 19 ..... 9 ..... 14 ..... 20 ..... 98 ..... 11 ..... 16 ..... 53 ..... 116 ..... 86 ..... 155 ..... 154 Lifecolor Humbrol Ref. No. Ref. No. UA006 UA008 UA015 UA016 UA019 UA021 UA022 UA023 UA025 UA026 UA027 UA028 UA030 UA033 ..... 150 ..... 149 ..... 118 ..... 142 ..... 168 ..... 28 ..... 125 ..... 147 ..... 129 ..... 127 ..... 128 ..... 126 ..... 123 ..... 140 Lifecolor Humbrol Ref. No. Ref. No. UA035 UA037 UA038 UA039 UA041 UA042 UA042 UA044 UA045 UA046 UA055 UA055 UA059 UA060 ..... 92 ..... 47 ..... 145 ..... 72 ..... 146 ..... 186 ..... 188 ..... 181 ..... 144 ..... 27 ..... 76 ..... 145 ..... 31 ..... 120 Lifecolor Humbrol Ref. No. Ref. No. UA073 UA078 UA079 UA081 UA082 UA088 UA089 UA093 UA095 UA097 UA106 UA108 UA109 UA113 ..... 106 ..... 172 ..... 167 ..... 63 ..... 186 ..... 180 ..... 252 ..... 5 ..... 23 ..... 94 ..... 66 ..... 92 ..... 112 ..... 141 Lifecolor Humbrol Ref. No. Ref. No. UA119 UA124 UA125 UA140 UA134 UA139 UA142 UA143 ..... 108 ..... 65 ..... 119 ..... 154 ..... 81 ..... 122 ..... 114 ..... 98 BS 4800 / 10B21 GAMES WORKSHOP 2 3 5 7 9 10 14 15 EMERALD BRUNSWICK GREEN DARK ADMIRALTY GREY LIGHT BUFF TAN SERVICE BROWN FRENCH BLUE MIDNIGHT BLUE 18 19 20 21 22 35 38 40 ORANGE BRIGHT RED CRIMSON BLACK WHITE VARNISH LIME PALE GREY 41 47 48 68 69 200 208 209 IVORY SEA BLUE MEDITERRANEAN BLUE PURPLE YELLOW PINK FLUORESCENT SIGNAL GREEN FLUORESCENT FIRE ORANGE 220 Humbrol Ref. No. Games Workshop Ref. No. BESTIAL BROWN BLAZING ORANGE BLEACHED BONE BLOOD RED BRAZEN BRASS BUBONIC BROWN CHAINMAIL CHAOS BLACK CODEX GREY DARK FLESH DWARF BRONZE DWARF FLESH ENCHANTED BLUE FIERY ORANGE FORTRESS GREY GOBLIN GREEN ................................. 186 ................................. 82 ................................. 103 ................................. 174 ................................. 12 ................................. 225 ................................. 11 ................................. 33 ...................... 126, 140, 106, 224 ................................. 133 ................................. 55 ................................. 61 ................................. 14* ................................. 18 ................................. 167 ................................. 131 Humbrol Ref. No. Games Workshop Ref. No. GOLDEN YELLOW ................................. ........................... MITHRIL SILVER NAUSEATING BLUE ................................. ................................. RED GORE ................................. REGAL BLUE ................................. SCAB RED SCORCHED BROWN ................................. SCORPION GREEN ................................. ................................. SHADOW GREY ................................. SHINING GOLD ................................. SNOT GREEN SUNBURST YELLOW ................................. ULTRAMARINES BLUE ........................... ................................. VERMIN BROWN ................................. VOMIT BROWN FERRARI RED GLOSS 154 11 25 73 104 73 98 38 157 54 101 69 14* 9 61 *with matt varnish TAMIYA Tamiya Ref. No. 11 12 16 50 51 52 53 54 SILVER COPPER GOLD GREEN MIST SUNSET RED BALTIC BLUE GUNMETAL BRASS 55 56 191 201 222 BRONZE ALUMINIUM CHROME SILVER METALLIC BLACK MOONLIGHT BLUE 27001 27002 27003 27004 ALUMINIUM POLISHED ALUMINIUM POLISHED STEEL GUNMETAL METALLIC METALCOTE X1 ........ X2 ........ X3 ........ X4 ........ X5 ........ X6 ........ X7 ........ X8 ........ X9 ........ X10 ........ 1322 1325 RED ORANGE GREEN CLEAR Colours are reproduced as accurately as print process will allow. 21 22 15 14 3 18 19 69 10 53 Tamiya Ref. No. Humbrol Ref. No. X11 ........ 11 X12 ........ 16 X13 ........ 52 X14 ........ 48 X15 ........ 38 X16 ........ 68 X17 ........ 200 X18 ........ 85 XF1 ........ 33 XF2 ........ 34 Tamiya Ref. No. Humbrol Ref. No. XF3 ........ 99 XF4 ........ 81 XF5 ........ 101 XF6 ........ 12 XF7 ........ 60 XF8 ........ 25 XF9 ........ 73 XF10........ 98 XF11........ 75 XF12........ 64 Tamiya Ref. No. Humbrol Ref. No. XF13 ........116 XF14 ........147 XF15 ........ 61 XF16 ........ 11 XF17 ........104 XF18 ........ 96 XF19 ........ 64 XF20 ........126 XF21 ........ 90 XF22 ........ 92 Tamiya Ref. No. Humbrol Ref. No. XF23 ........ 65 XF24 ........ 112 XF25 ........ 87 XF26 ........ 149 XF27 ........ 91 XF49 ........ 26 XF50 ........ 96 XF52 ........ 29 XF53 ........ 156 XF54 ........ 27 Tamiya Ref. No. Humbrol Ref. No. XF55 ........ 28 XF56 ........ 56 XF57 ........ 83 XF58 ........123 XF59 ........ 63 XF60 ........ 84 XF61 ........ 30 XF62 ........ 66 F.S. F.S. Ref. No. 1321 Humbrol Ref. No. 17038 17178 17875 27038 30117 30219 Humbrol Ref. No. .... .... .... .... .... .... 21 191 22 85 186 118 F.S. Ref. No. 30277 31136 33531 33538 33613 34079 Humbrol Ref. No. .... .... .... .... .... .... 187 153 121 154 148 116 F.S. Ref. No. 34087 34092 34097 34102 34127 34227 Humbrol Ref. No. .... .... .... .... .... .... 155 149 105 117 150 120 F.S. Ref. No. 35164 35237 35622 36081 36118 36173 Humbrol Ref. No. .... .... .... .... .... .... 144 145 122 32 125 156 F.S. Ref. No. 36231 36270 36320 36375 36440 36495 Humbrol Ref. No. .... .... .... .... .... .... 140 126 128 127 129 147 F.S. Ref. No. 36622 37038 37875 27875 30219 Humbrol Ref. No. .... .... .... .... .... 28 33 34 130 119 Cross references are given to identical or similar colours, however no guarantee of accuracy can be given. HUMBROL PAINT COLOURS Revell Ref. No. Buying a model kit is only the start of a pastime enjoyed by millions the world over. 1 23 24 25 26 27 28 29 GREY PRIMER DUCK EGG BLUE TRAINER YELLOW BLUE KHAKI SEA GREY CAMOUFLAGE GREY DARK EARTH 30 31 32 33 34 49 60 61 DARK GREEN SLATE GREY DARK GREY BLACK WHITE VARNISH SCARLET FLESH 62 63 64 65 66 67 70 72 LEATHER SAND LIGHT GREY AIRCRAFT BLUE OLIVE DRAB TANK GREY BRICK RED KHAKI DRILL Generations of modellers, from beginner to experienced professional, have turned to Humbrol products to help them construct and decorate their models to make them works to be proud of. Humbrol have been producing paints, 74 75 76 77 78 79 80 WINE LINEN BRONZE GREEN UNIFORM GREEN NAVY BLUE COCKPIT GREEN BLUE GREY GRASS GREEN varnishes, brushes and other products to enable 81 82 83 84 86 87 88 89 you to get the best results out of your PALE YELLOW ORANGE LINING OCHRE MID STONE LIGHT OLIVE STEEL GREY DECK GREEN MIDDLE BLUE and as well as the famous Enamel product in the iconic Humbrol tinlet, the range includes glues, for use with their plastic model kits. 90 91 93 94 96 98 99 100 BEIGE GREEN BLACK GREEN DESERT YELLOW BROWN YELLOW RAF BLUE CHOCOLATE LEMON RED BROWN 101 102 103 104 105 106 109 110 MID GREEN ARMY GREEN CREAM OXFORD BLUE MARINE GREEN OCEAN GREY WWI BLUE NATURAL WOOD 113 116 117 118 119 120 121 140 RUST US DARK GREEN US LIGHT GREEN US TAN LIGHT EARTH LIGHT GREEN PALE STONE GULL GREY 144 145 147 148 149 150 153 154 INTERMEDIATE BLUE MEDIUM GREY LIGHT GREY RADOME TAN DARK GREEN FOREST GREEN INSIGNIA RED INSIGNIA YELLOW Visit Humbrol at: www.humbrol.com www.airfix.com ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ 35 49 22 34 21 33 85 41 69 24 Revell Ref. No. 16 30 31 35 36 37 45 47 48 51 Humbrol Ref. No. Revell Ref. No. ........ 94 ........ 18 ........ 19 ........ 61 ........ 60 ........ 70 ........ 86 ........ 106 ........ 88 ........ 48 52 53 55 56 57 66 67 71 75 77 Humbrol Ref. No. ........ 14 ........ 68 ........ 65 ........ 25 ........ 106 ........ 66 ........ 91 ........ 112 ........ 64 ........ 79 Revell Ref. No. 78 79 81 85 86 87 88 90 93 94 Humbrol Ref. No. ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ Revell Ref. No. Humbrol Ref. No. 95 ........ 55 96 ........ 51 97 ........ 50 98 ........ 52 99 ........ 56 99 ........ 56 301 ........ 130 302 ........ 85 311 ........ 24 314 ........ 94 67 92 10 62 26 29 94 11 54 16 Revell Ref. No. Humbrol Ref. No. 330 ........ 60 361 ........ 105 363 ........ 195 364 ........ 101 371 ........ 196 374 ........ 128 382 ........ 118 378 ........ 79 382 ........ 118 R.A.L. Humbrol Ref. No. R.A.L. Ref. No. 2004 ....... 18 3000 ....... 19 3004 ....... 20 3026 ....... 209 Humbrol Ref. No. R.A.L. Ref. No. 6003 ....... 117 6020 ....... 195 7000 ....... 145 7009 ....... 91 Humbrol Ref. No. R.A.L. Ref. No. Humbrol Ref. No. 8023 ....... 9001 ....... 9005 ....... 9005 ....... 7012 ....... 79 7031 ....... 27 7035 ....... 196 8017 ....... 10 R.A.L. Ref. No. Humbrol Ref. No. 9010 ....... 22 9010 ....... 130 9011 ....... 33 62 34 21 85 GUNZE SANGYO modelling experience. Humbrol products are recommended by Airfix 1 2 4 5 7 8 9 10 12 15 Humbrol Ref. No. R.A.L. Ref. No. 73 adhesives and other products for over 50 years CONVERSION TABLES REVELL Gunze Sangyo Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 22 21 19 69 15 3 10 11 16 12 34 33 73 18 14 38 Gunze Sangyo Ref. No. 17 19 20 22 23 25 26 27 28 30 31 36 37 39 42 43 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 10 200 49 5 60 48 2 9 201 35 90 75 10 68 144 20 44 45 46 50 52 53 55 56 57 61 64 66 67 68 71 72 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 61 47 2 38 155 128 15 144 147 146 116 62 65 27 84 29 73 74 75 76 78 79 81 87 88 89 98 301 302 303 304 305 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 30 23 27 53 66 93 26 51 52 50 209 32 149 117 155 125 306 307 308 309 310 311 312 313 314 316 317 318 320 325 327 330 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 126 128 127 116 119 28 120 121 122 22 140 148 30 129 153 163 331 332 333 334 335 337 338 340 343 344 346 Humbrol Ref. No. Testor Ref. No. 164 166 123 167 123 145 147 105 33 113 93 TESTOR 155 157 159 160 171 186 187 224 OLIVE DRAB AZURE BLUE KHAKI DRAB GERMAN CAMOUFLAGE RED BROWN ANTIQUE BRONZE BROWN DARK STONE DARK SLATE GREY 230 225 226 250 PRU BLUE MIDDLE STONE INTERIOR GREEN DESERT SAND MATT Testor Ref. No. 1501 1502 1503 1508 1511 1514 1524 1527 1540 Humbrol Ref. No. ...... ...... ...... ...... ...... ...... ...... ...... ...... PAINTS AND ACCESSORIES 1551 1569 1582 1583 1701 1704 1705 1706 1707 ...... 12 ...... 24 ...... 54 ...... 33 ...... 186 ...... 187 ...... 153 ...... 63 ...... 191 1708 1709 1710 1711 1712 1713 1714 1716 1720 ...... 154 ...... 148 ...... 116 ...... 155 ...... 105 ...... 117 ...... 150 ...... 120 ...... 144 1721 1723 1725 1728 1730 1732 1733 1735 1736 ...... 145 ...... 125 ...... 126 ...... 127 ...... 129 ...... 147 ...... 28 ...... 63 ...... 62 1740 1741 1742 1744 1745 1747 1749 1764 1768 ...... 140 ...... 128 ...... 118 ...... 16 ...... 22 ...... 21 ...... 33 ...... 149 ...... 34 1781 2702 2709 2713 2715 2734 Humbrol Ref. No. ...... 56 ...... 52 ...... 41 ...... 201 ...... 14 ...... 11 LIFECOLOR BS 381C 636 Lifecolor Ref. No. 71 85 123 125 126 127 128 129 OAK COAL BLACK EXTRA DARK SEA GREY US DARK GREY US MEDIUM GREY US GHOST GREY US COMPASS GREY US GULL GREY 130 131 132 133 135 156 163 164 WHITE MID GREEN RED BROWN VARNISH DARK CAMOUFLAGE GREY DARK GREEN DARK SEA GREY 168 165 166 167 174 195 196 HEMP MEDIUM SEA GREY LIGHT AIRCRAFT GREY RAF BARLEY GREY SIGNAL RED DARK GREEN LIGHT GREY SATIN 20 51 19 47 15 69 2 18 10 Testor Ref. No. LC01 LC02 LC06 LC08 LC16 LC10 LC21 LC22 LC35 LC36 LC37 LC39 LC51 LC52 Humbrol Ref. No. ..... 34 ..... 33 ..... 60 ..... 48 ..... 133 ..... 25 ..... 61 ..... 192 ..... 189 ..... 62 ..... 10 ..... 78 ..... 22 ..... 21 Lifecolor Humbrol Ref. No. Ref. No. LC53 LC55 LC56 LC65 LC60 LC66 LC67 LC74 LC75 LC76 UA001 UA002 UA003 UA004 ..... 69 ..... 18 ..... 19 ..... 9 ..... 14 ..... 20 ..... 98 ..... 11 ..... 16 ..... 53 ..... 116 ..... 86 ..... 155 ..... 154 Lifecolor Humbrol Ref. No. Ref. No. UA006 UA008 UA015 UA016 UA019 UA021 UA022 UA023 UA025 UA026 UA027 UA028 UA030 UA033 ..... 150 ..... 149 ..... 118 ..... 142 ..... 168 ..... 28 ..... 125 ..... 147 ..... 129 ..... 127 ..... 128 ..... 126 ..... 123 ..... 140 Lifecolor Humbrol Ref. No. Ref. No. UA035 UA037 UA038 UA039 UA041 UA042 UA042 UA044 UA045 UA046 UA055 UA055 UA059 UA060 ..... 92 ..... 47 ..... 145 ..... 72 ..... 146 ..... 186 ..... 188 ..... 181 ..... 144 ..... 27 ..... 76 ..... 145 ..... 31 ..... 120 Lifecolor Humbrol Ref. No. Ref. No. UA073 UA078 UA079 UA081 UA082 UA088 UA089 UA093 UA095 UA097 UA106 UA108 UA109 UA113 ..... 106 ..... 172 ..... 167 ..... 63 ..... 186 ..... 180 ..... 252 ..... 5 ..... 23 ..... 94 ..... 66 ..... 92 ..... 112 ..... 141 Lifecolor Humbrol Ref. No. Ref. No. UA119 UA124 UA125 UA140 UA134 UA139 UA142 UA143 ..... 108 ..... 65 ..... 119 ..... 154 ..... 81 ..... 122 ..... 114 ..... 98 BS 4800 / 10B21 GAMES WORKSHOP 2 3 5 7 9 10 14 15 EMERALD BRUNSWICK GREEN DARK ADMIRALTY GREY LIGHT BUFF TAN SERVICE BROWN FRENCH BLUE MIDNIGHT BLUE 18 19 20 21 22 35 38 40 ORANGE BRIGHT RED CRIMSON BLACK WHITE VARNISH LIME PALE GREY 41 47 48 68 69 200 208 209 IVORY SEA BLUE MEDITERRANEAN BLUE PURPLE YELLOW PINK FLUORESCENT SIGNAL GREEN FLUORESCENT FIRE ORANGE 220 Humbrol Ref. No. Games Workshop Ref. No. BESTIAL BROWN BLAZING ORANGE BLEACHED BONE BLOOD RED BRAZEN BRASS BUBONIC BROWN CHAINMAIL CHAOS BLACK CODEX GREY DARK FLESH DWARF BRONZE DWARF FLESH ENCHANTED BLUE FIERY ORANGE FORTRESS GREY GOBLIN GREEN ................................. 186 ................................. 82 ................................. 103 ................................. 174 ................................. 12 ................................. 225 ................................. 11 ................................. 33 ...................... 126, 140, 106, 224 ................................. 133 ................................. 55 ................................. 61 ................................. 14* ................................. 18 ................................. 167 ................................. 131 Humbrol Ref. No. Games Workshop Ref. No. GOLDEN YELLOW ................................. ........................... MITHRIL SILVER NAUSEATING BLUE ................................. ................................. RED GORE ................................. REGAL BLUE ................................. SCAB RED SCORCHED BROWN ................................. SCORPION GREEN ................................. ................................. SHADOW GREY ................................. SHINING GOLD ................................. SNOT GREEN SUNBURST YELLOW ................................. ULTRAMARINES BLUE ........................... ................................. VERMIN BROWN ................................. VOMIT BROWN FERRARI RED GLOSS 154 11 25 73 104 73 98 38 157 54 101 69 14* 9 61 *with matt varnish TAMIYA Tamiya Ref. No. 11 12 16 50 51 52 53 54 SILVER COPPER GOLD GREEN MIST SUNSET RED BALTIC BLUE GUNMETAL BRASS 55 56 191 201 222 BRONZE ALUMINIUM CHROME SILVER METALLIC BLACK MOONLIGHT BLUE 27001 27002 27003 27004 ALUMINIUM POLISHED ALUMINIUM POLISHED STEEL GUNMETAL METALLIC METALCOTE X1 ........ X2 ........ X3 ........ X4 ........ X5 ........ X6 ........ X7 ........ X8 ........ X9 ........ X10 ........ 1322 1325 RED ORANGE GREEN CLEAR Colours are reproduced as accurately as print process will allow. 21 22 15 14 3 18 19 69 10 53 Tamiya Ref. No. Humbrol Ref. No. X11 ........ 11 X12 ........ 16 X13 ........ 52 X14 ........ 48 X15 ........ 38 X16 ........ 68 X17 ........ 200 X18 ........ 85 XF1 ........ 33 XF2 ........ 34 Tamiya Ref. No. Humbrol Ref. No. XF3 ........ 99 XF4 ........ 81 XF5 ........ 101 XF6 ........ 12 XF7 ........ 60 XF8 ........ 25 XF9 ........ 73 XF10........ 98 XF11........ 75 XF12........ 64 Tamiya Ref. No. Humbrol Ref. No. XF13 ........116 XF14 ........147 XF15 ........ 61 XF16 ........ 11 XF17 ........104 XF18 ........ 96 XF19 ........ 64 XF20 ........126 XF21 ........ 90 XF22 ........ 92 Tamiya Ref. No. Humbrol Ref. No. XF23 ........ 65 XF24 ........ 112 XF25 ........ 87 XF26 ........ 149 XF27 ........ 91 XF49 ........ 26 XF50 ........ 96 XF52 ........ 29 XF53 ........ 156 XF54 ........ 27 Tamiya Ref. No. Humbrol Ref. No. XF55 ........ 28 XF56 ........ 56 XF57 ........ 83 XF58 ........123 XF59 ........ 63 XF60 ........ 84 XF61 ........ 30 XF62 ........ 66 F.S. F.S. Ref. No. 1321 Humbrol Ref. No. 17038 17178 17875 27038 30117 30219 Humbrol Ref. No. .... .... .... .... .... .... 21 191 22 85 186 118 F.S. Ref. No. 30277 31136 33531 33538 33613 34079 Humbrol Ref. No. .... .... .... .... .... .... 187 153 121 154 148 116 F.S. Ref. No. 34087 34092 34097 34102 34127 34227 Humbrol Ref. No. .... .... .... .... .... .... 155 149 105 117 150 120 F.S. Ref. No. 35164 35237 35622 36081 36118 36173 Humbrol Ref. No. .... .... .... .... .... .... 144 145 122 32 125 156 F.S. Ref. No. 36231 36270 36320 36375 36440 36495 Humbrol Ref. No. .... .... .... .... .... .... 140 126 128 127 129 147 F.S. Ref. No. 36622 37038 37875 27875 30219 Humbrol Ref. No. .... .... .... .... .... 28 33 34 130 119 Cross references are given to identical or similar colours, however no guarantee of accuracy can be given. HUMBROL PAINT COLOURS Revell Ref. No. Buying a model kit is only the start of a pastime enjoyed by millions the world over. 1 23 24 25 26 27 28 29 GREY PRIMER DUCK EGG BLUE TRAINER YELLOW BLUE KHAKI SEA GREY CAMOUFLAGE GREY DARK EARTH 30 31 32 33 34 49 60 61 DARK GREEN SLATE GREY DARK GREY BLACK WHITE VARNISH SCARLET FLESH 62 63 64 65 66 67 70 72 LEATHER SAND LIGHT GREY AIRCRAFT BLUE OLIVE DRAB TANK GREY BRICK RED KHAKI DRILL Generations of modellers, from beginner to experienced professional, have turned to Humbrol products to help them construct and decorate their models to make them works to be proud of. Humbrol have been producing paints, 74 75 76 77 78 79 80 WINE LINEN BRONZE GREEN UNIFORM GREEN NAVY BLUE COCKPIT GREEN BLUE GREY GRASS GREEN varnishes, brushes and other products to enable 81 82 83 84 86 87 88 89 you to get the best results out of your PALE YELLOW ORANGE LINING OCHRE MID STONE LIGHT OLIVE STEEL GREY DECK GREEN MIDDLE BLUE and as well as the famous Enamel product in the iconic Humbrol tinlet, the range includes glues, for use with their plastic model kits. 90 91 93 94 96 98 99 100 BEIGE GREEN BLACK GREEN DESERT YELLOW BROWN YELLOW RAF BLUE CHOCOLATE LEMON RED BROWN 101 102 103 104 105 106 109 110 MID GREEN ARMY GREEN CREAM OXFORD BLUE MARINE GREEN OCEAN GREY WWI BLUE NATURAL WOOD 113 116 117 118 119 120 121 140 RUST US DARK GREEN US LIGHT GREEN US TAN LIGHT EARTH LIGHT GREEN PALE STONE GULL GREY 144 145 147 148 149 150 153 154 INTERMEDIATE BLUE MEDIUM GREY LIGHT GREY RADOME TAN DARK GREEN FOREST GREEN INSIGNIA RED INSIGNIA YELLOW Visit Humbrol at: www.humbrol.com www.airfix.com ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ 35 49 22 34 21 33 85 41 69 24 Revell Ref. No. 16 30 31 35 36 37 45 47 48 51 Humbrol Ref. No. Revell Ref. No. ........ 94 ........ 18 ........ 19 ........ 61 ........ 60 ........ 70 ........ 86 ........ 106 ........ 88 ........ 48 52 53 55 56 57 66 67 71 75 77 Humbrol Ref. No. ........ 14 ........ 68 ........ 65 ........ 25 ........ 106 ........ 66 ........ 91 ........ 112 ........ 64 ........ 79 Revell Ref. No. 78 79 81 85 86 87 88 90 93 94 Humbrol Ref. No. ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ Revell Ref. No. Humbrol Ref. No. 95 ........ 55 96 ........ 51 97 ........ 50 98 ........ 52 99 ........ 56 99 ........ 56 301 ........ 130 302 ........ 85 311 ........ 24 314 ........ 94 67 92 10 62 26 29 94 11 54 16 Revell Ref. No. Humbrol Ref. No. 330 ........ 60 361 ........ 105 363 ........ 195 364 ........ 101 371 ........ 196 374 ........ 128 382 ........ 118 378 ........ 79 382 ........ 118 R.A.L. Humbrol Ref. No. R.A.L. Ref. No. 2004 ....... 18 3000 ....... 19 3004 ....... 20 3026 ....... 209 Humbrol Ref. No. R.A.L. Ref. No. 6003 ....... 117 6020 ....... 195 7000 ....... 145 7009 ....... 91 Humbrol Ref. No. R.A.L. Ref. No. Humbrol Ref. No. 8023 ....... 9001 ....... 9005 ....... 9005 ....... 7012 ....... 79 7031 ....... 27 7035 ....... 196 8017 ....... 10 R.A.L. Ref. No. Humbrol Ref. No. 9010 ....... 22 9010 ....... 130 9011 ....... 33 62 34 21 85 GUNZE SANGYO modelling experience. Humbrol products are recommended by Airfix 1 2 4 5 7 8 9 10 12 15 Humbrol Ref. No. R.A.L. Ref. No. 73 adhesives and other products for over 50 years CONVERSION TABLES REVELL Gunze Sangyo Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 22 21 19 69 15 3 10 11 16 12 34 33 73 18 14 38 Gunze Sangyo Ref. No. 17 19 20 22 23 25 26 27 28 30 31 36 37 39 42 43 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 10 200 49 5 60 48 2 9 201 35 90 75 10 68 144 20 44 45 46 50 52 53 55 56 57 61 64 66 67 68 71 72 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 61 47 2 38 155 128 15 144 147 146 116 62 65 27 84 29 73 74 75 76 78 79 81 87 88 89 98 301 302 303 304 305 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 30 23 27 53 66 93 26 51 52 50 209 32 149 117 155 125 306 307 308 309 310 311 312 313 314 316 317 318 320 325 327 330 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 126 128 127 116 119 28 120 121 122 22 140 148 30 129 153 163 331 332 333 334 335 337 338 340 343 344 346 Humbrol Ref. No. Testor Ref. No. 164 166 123 167 123 145 147 105 33 113 93 TESTOR 155 157 159 160 171 186 187 224 OLIVE DRAB AZURE BLUE KHAKI DRAB GERMAN CAMOUFLAGE RED BROWN ANTIQUE BRONZE BROWN DARK STONE DARK SLATE GREY 230 225 226 250 PRU BLUE MIDDLE STONE INTERIOR GREEN DESERT SAND MATT Testor Ref. No. 1501 1502 1503 1508 1511 1514 1524 1527 1540 Humbrol Ref. No. ...... ...... ...... ...... ...... ...... ...... ...... ...... PAINTS AND ACCESSORIES 1551 1569 1582 1583 1701 1704 1705 1706 1707 ...... 12 ...... 24 ...... 54 ...... 33 ...... 186 ...... 187 ...... 153 ...... 63 ...... 191 1708 1709 1710 1711 1712 1713 1714 1716 1720 ...... 154 ...... 148 ...... 116 ...... 155 ...... 105 ...... 117 ...... 150 ...... 120 ...... 144 1721 1723 1725 1728 1730 1732 1733 1735 1736 ...... 145 ...... 125 ...... 126 ...... 127 ...... 129 ...... 147 ...... 28 ...... 63 ...... 62 1740 1741 1742 1744 1745 1747 1749 1764 1768 ...... 140 ...... 128 ...... 118 ...... 16 ...... 22 ...... 21 ...... 33 ...... 149 ...... 34 1781 2702 2709 2713 2715 2734 Humbrol Ref. No. ...... 56 ...... 52 ...... 41 ...... 201 ...... 14 ...... 11 LIFECOLOR BS 381C 636 Lifecolor Ref. No. 71 85 123 125 126 127 128 129 OAK COAL BLACK EXTRA DARK SEA GREY US DARK GREY US MEDIUM GREY US GHOST GREY US COMPASS GREY US GULL GREY 130 131 132 133 135 156 163 164 WHITE MID GREEN RED BROWN VARNISH DARK CAMOUFLAGE GREY DARK GREEN DARK SEA GREY 168 165 166 167 174 195 196 HEMP MEDIUM SEA GREY LIGHT AIRCRAFT GREY RAF BARLEY GREY SIGNAL RED DARK GREEN LIGHT GREY SATIN 20 51 19 47 15 69 2 18 10 Testor Ref. No. LC01 LC02 LC06 LC08 LC16 LC10 LC21 LC22 LC35 LC36 LC37 LC39 LC51 LC52 Humbrol Ref. No. ..... 34 ..... 33 ..... 60 ..... 48 ..... 133 ..... 25 ..... 61 ..... 192 ..... 189 ..... 62 ..... 10 ..... 78 ..... 22 ..... 21 Lifecolor Humbrol Ref. No. Ref. No. LC53 LC55 LC56 LC65 LC60 LC66 LC67 LC74 LC75 LC76 UA001 UA002 UA003 UA004 ..... 69 ..... 18 ..... 19 ..... 9 ..... 14 ..... 20 ..... 98 ..... 11 ..... 16 ..... 53 ..... 116 ..... 86 ..... 155 ..... 154 Lifecolor Humbrol Ref. No. Ref. No. UA006 UA008 UA015 UA016 UA019 UA021 UA022 UA023 UA025 UA026 UA027 UA028 UA030 UA033 ..... 150 ..... 149 ..... 118 ..... 142 ..... 168 ..... 28 ..... 125 ..... 147 ..... 129 ..... 127 ..... 128 ..... 126 ..... 123 ..... 140 Lifecolor Humbrol Ref. No. Ref. No. UA035 UA037 UA038 UA039 UA041 UA042 UA042 UA044 UA045 UA046 UA055 UA055 UA059 UA060 ..... 92 ..... 47 ..... 145 ..... 72 ..... 146 ..... 186 ..... 188 ..... 181 ..... 144 ..... 27 ..... 76 ..... 145 ..... 31 ..... 120 Lifecolor Humbrol Ref. No. Ref. No. UA073 UA078 UA079 UA081 UA082 UA088 UA089 UA093 UA095 UA097 UA106 UA108 UA109 UA113 ..... 106 ..... 172 ..... 167 ..... 63 ..... 186 ..... 180 ..... 252 ..... 5 ..... 23 ..... 94 ..... 66 ..... 92 ..... 112 ..... 141 Lifecolor Humbrol Ref. No. Ref. No. UA119 UA124 UA125 UA140 UA134 UA139 UA142 UA143 ..... 108 ..... 65 ..... 119 ..... 154 ..... 81 ..... 122 ..... 114 ..... 98 BS 4800 / 10B21 GAMES WORKSHOP 2 3 5 7 9 10 14 15 EMERALD BRUNSWICK GREEN DARK ADMIRALTY GREY LIGHT BUFF TAN SERVICE BROWN FRENCH BLUE MIDNIGHT BLUE 18 19 20 21 22 35 38 40 ORANGE BRIGHT RED CRIMSON BLACK WHITE VARNISH LIME PALE GREY 41 47 48 68 69 200 208 209 IVORY SEA BLUE MEDITERRANEAN BLUE PURPLE YELLOW PINK FLUORESCENT SIGNAL GREEN FLUORESCENT FIRE ORANGE 220 Humbrol Ref. No. Games Workshop Ref. No. BESTIAL BROWN BLAZING ORANGE BLEACHED BONE BLOOD RED BRAZEN BRASS BUBONIC BROWN CHAINMAIL CHAOS BLACK CODEX GREY DARK FLESH DWARF BRONZE DWARF FLESH ENCHANTED BLUE FIERY ORANGE FORTRESS GREY GOBLIN GREEN ................................. 186 ................................. 82 ................................. 103 ................................. 174 ................................. 12 ................................. 225 ................................. 11 ................................. 33 ...................... 126, 140, 106, 224 ................................. 133 ................................. 55 ................................. 61 ................................. 14* ................................. 18 ................................. 167 ................................. 131 Humbrol Ref. No. Games Workshop Ref. No. GOLDEN YELLOW ................................. ........................... MITHRIL SILVER NAUSEATING BLUE ................................. ................................. RED GORE ................................. REGAL BLUE ................................. SCAB RED SCORCHED BROWN ................................. SCORPION GREEN ................................. ................................. SHADOW GREY ................................. SHINING GOLD ................................. SNOT GREEN SUNBURST YELLOW ................................. ULTRAMARINES BLUE ........................... ................................. VERMIN BROWN ................................. VOMIT BROWN FERRARI RED GLOSS 154 11 25 73 104 73 98 38 157 54 101 69 14* 9 61 *with matt varnish TAMIYA Tamiya Ref. No. 11 12 16 50 51 52 53 54 SILVER COPPER GOLD GREEN MIST SUNSET RED BALTIC BLUE GUNMETAL BRASS 55 56 191 201 222 BRONZE ALUMINIUM CHROME SILVER METALLIC BLACK MOONLIGHT BLUE 27001 27002 27003 27004 ALUMINIUM POLISHED ALUMINIUM POLISHED STEEL GUNMETAL METALLIC METALCOTE X1 ........ X2 ........ X3 ........ X4 ........ X5 ........ X6 ........ X7 ........ X8 ........ X9 ........ X10 ........ 1322 1325 RED ORANGE GREEN CLEAR Colours are reproduced as accurately as print process will allow. 21 22 15 14 3 18 19 69 10 53 Tamiya Ref. No. Humbrol Ref. No. X11 ........ 11 X12 ........ 16 X13 ........ 52 X14 ........ 48 X15 ........ 38 X16 ........ 68 X17 ........ 200 X18 ........ 85 XF1 ........ 33 XF2 ........ 34 Tamiya Ref. No. Humbrol Ref. No. XF3 ........ 99 XF4 ........ 81 XF5 ........ 101 XF6 ........ 12 XF7 ........ 60 XF8 ........ 25 XF9 ........ 73 XF10........ 98 XF11........ 75 XF12........ 64 Tamiya Ref. No. Humbrol Ref. No. XF13 ........116 XF14 ........147 XF15 ........ 61 XF16 ........ 11 XF17 ........104 XF18 ........ 96 XF19 ........ 64 XF20 ........126 XF21 ........ 90 XF22 ........ 92 Tamiya Ref. No. Humbrol Ref. No. XF23 ........ 65 XF24 ........ 112 XF25 ........ 87 XF26 ........ 149 XF27 ........ 91 XF49 ........ 26 XF50 ........ 96 XF52 ........ 29 XF53 ........ 156 XF54 ........ 27 Tamiya Ref. No. Humbrol Ref. No. XF55 ........ 28 XF56 ........ 56 XF57 ........ 83 XF58 ........123 XF59 ........ 63 XF60 ........ 84 XF61 ........ 30 XF62 ........ 66 F.S. F.S. Ref. No. 1321 Humbrol Ref. No. 17038 17178 17875 27038 30117 30219 Humbrol Ref. No. .... .... .... .... .... .... 21 191 22 85 186 118 F.S. Ref. No. 30277 31136 33531 33538 33613 34079 Humbrol Ref. No. .... .... .... .... .... .... 187 153 121 154 148 116 F.S. Ref. No. 34087 34092 34097 34102 34127 34227 Humbrol Ref. No. .... .... .... .... .... .... 155 149 105 117 150 120 F.S. Ref. No. 35164 35237 35622 36081 36118 36173 Humbrol Ref. No. .... .... .... .... .... .... 144 145 122 32 125 156 F.S. Ref. No. 36231 36270 36320 36375 36440 36495 Humbrol Ref. No. .... .... .... .... .... .... 140 126 128 127 129 147 F.S. Ref. No. 36622 37038 37875 27875 30219 Humbrol Ref. No. .... .... .... .... .... 28 33 34 130 119 Cross references are given to identical or similar colours, however no guarantee of accuracy can be given. HUMBROL PAINT COLOURS Revell Ref. No. Buying a model kit is only the start of a pastime enjoyed by millions the world over. 1 23 24 25 26 27 28 29 GREY PRIMER DUCK EGG BLUE TRAINER YELLOW BLUE KHAKI SEA GREY CAMOUFLAGE GREY DARK EARTH 30 31 32 33 34 49 60 61 DARK GREEN SLATE GREY DARK GREY BLACK WHITE VARNISH SCARLET FLESH 62 63 64 65 66 67 70 72 LEATHER SAND LIGHT GREY AIRCRAFT BLUE OLIVE DRAB TANK GREY BRICK RED KHAKI DRILL Generations of modellers, from beginner to experienced professional, have turned to Humbrol products to help them construct and decorate their models to make them works to be proud of. Humbrol have been producing paints, 74 75 76 77 78 79 80 WINE LINEN BRONZE GREEN UNIFORM GREEN NAVY BLUE COCKPIT GREEN BLUE GREY GRASS GREEN varnishes, brushes and other products to enable 81 82 83 84 86 87 88 89 you to get the best results out of your PALE YELLOW ORANGE LINING OCHRE MID STONE LIGHT OLIVE STEEL GREY DECK GREEN MIDDLE BLUE and as well as the famous Enamel product in the iconic Humbrol tinlet, the range includes glues, for use with their plastic model kits. 90 91 93 94 96 98 99 100 BEIGE GREEN BLACK GREEN DESERT YELLOW BROWN YELLOW RAF BLUE CHOCOLATE LEMON RED BROWN 101 102 103 104 105 106 109 110 MID GREEN ARMY GREEN CREAM OXFORD BLUE MARINE GREEN OCEAN GREY WWI BLUE NATURAL WOOD 113 116 117 118 119 120 121 140 RUST US DARK GREEN US LIGHT GREEN US TAN LIGHT EARTH LIGHT GREEN PALE STONE GULL GREY 144 145 147 148 149 150 153 154 INTERMEDIATE BLUE MEDIUM GREY LIGHT GREY RADOME TAN DARK GREEN FOREST GREEN INSIGNIA RED INSIGNIA YELLOW Visit Humbrol at: www.humbrol.com www.airfix.com ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ 35 49 22 34 21 33 85 41 69 24 Revell Ref. No. 16 30 31 35 36 37 45 47 48 51 Humbrol Ref. No. Revell Ref. No. ........ 94 ........ 18 ........ 19 ........ 61 ........ 60 ........ 70 ........ 86 ........ 106 ........ 88 ........ 48 52 53 55 56 57 66 67 71 75 77 Humbrol Ref. No. ........ 14 ........ 68 ........ 65 ........ 25 ........ 106 ........ 66 ........ 91 ........ 112 ........ 64 ........ 79 Revell Ref. No. 78 79 81 85 86 87 88 90 93 94 Humbrol Ref. No. ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ Revell Ref. No. Humbrol Ref. No. 95 ........ 55 96 ........ 51 97 ........ 50 98 ........ 52 99 ........ 56 99 ........ 56 301 ........ 130 302 ........ 85 311 ........ 24 314 ........ 94 67 92 10 62 26 29 94 11 54 16 Revell Ref. No. Humbrol Ref. No. 330 ........ 60 361 ........ 105 363 ........ 195 364 ........ 101 371 ........ 196 374 ........ 128 382 ........ 118 378 ........ 79 382 ........ 118 R.A.L. Humbrol Ref. No. R.A.L. Ref. No. 2004 ....... 18 3000 ....... 19 3004 ....... 20 3026 ....... 209 Humbrol Ref. No. R.A.L. Ref. No. 6003 ....... 117 6020 ....... 195 7000 ....... 145 7009 ....... 91 Humbrol Ref. No. R.A.L. Ref. No. Humbrol Ref. No. 8023 ....... 9001 ....... 9005 ....... 9005 ....... 7012 ....... 79 7031 ....... 27 7035 ....... 196 8017 ....... 10 R.A.L. Ref. No. Humbrol Ref. No. 9010 ....... 22 9010 ....... 130 9011 ....... 33 62 34 21 85 GUNZE SANGYO modelling experience. Humbrol products are recommended by Airfix 1 2 4 5 7 8 9 10 12 15 Humbrol Ref. No. R.A.L. Ref. No. 73 adhesives and other products for over 50 years CONVERSION TABLES REVELL Gunze Sangyo Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 22 21 19 69 15 3 10 11 16 12 34 33 73 18 14 38 Gunze Sangyo Ref. No. 17 19 20 22 23 25 26 27 28 30 31 36 37 39 42 43 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 10 200 49 5 60 48 2 9 201 35 90 75 10 68 144 20 44 45 46 50 52 53 55 56 57 61 64 66 67 68 71 72 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 61 47 2 38 155 128 15 144 147 146 116 62 65 27 84 29 73 74 75 76 78 79 81 87 88 89 98 301 302 303 304 305 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 30 23 27 53 66 93 26 51 52 50 209 32 149 117 155 125 306 307 308 309 310 311 312 313 314 316 317 318 320 325 327 330 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 126 128 127 116 119 28 120 121 122 22 140 148 30 129 153 163 331 332 333 334 335 337 338 340 343 344 346 Humbrol Ref. No. Testor Ref. No. 164 166 123 167 123 145 147 105 33 113 93 TESTOR 155 157 159 160 171 186 187 224 OLIVE DRAB AZURE BLUE KHAKI DRAB GERMAN CAMOUFLAGE RED BROWN ANTIQUE BRONZE BROWN DARK STONE DARK SLATE GREY 230 225 226 250 PRU BLUE MIDDLE STONE INTERIOR GREEN DESERT SAND MATT Testor Ref. No. 1501 1502 1503 1508 1511 1514 1524 1527 1540 Humbrol Ref. No. ...... ...... ...... ...... ...... ...... ...... ...... ...... PAINTS AND ACCESSORIES 1551 1569 1582 1583 1701 1704 1705 1706 1707 ...... 12 ...... 24 ...... 54 ...... 33 ...... 186 ...... 187 ...... 153 ...... 63 ...... 191 1708 1709 1710 1711 1712 1713 1714 1716 1720 ...... 154 ...... 148 ...... 116 ...... 155 ...... 105 ...... 117 ...... 150 ...... 120 ...... 144 1721 1723 1725 1728 1730 1732 1733 1735 1736 ...... 145 ...... 125 ...... 126 ...... 127 ...... 129 ...... 147 ...... 28 ...... 63 ...... 62 1740 1741 1742 1744 1745 1747 1749 1764 1768 ...... 140 ...... 128 ...... 118 ...... 16 ...... 22 ...... 21 ...... 33 ...... 149 ...... 34 1781 2702 2709 2713 2715 2734 Humbrol Ref. No. ...... 56 ...... 52 ...... 41 ...... 201 ...... 14 ...... 11 LIFECOLOR BS 381C 636 Lifecolor Ref. No. 71 85 123 125 126 127 128 129 OAK COAL BLACK EXTRA DARK SEA GREY US DARK GREY US MEDIUM GREY US GHOST GREY US COMPASS GREY US GULL GREY 130 131 132 133 135 156 163 164 WHITE MID GREEN RED BROWN VARNISH DARK CAMOUFLAGE GREY DARK GREEN DARK SEA GREY 168 165 166 167 174 195 196 HEMP MEDIUM SEA GREY LIGHT AIRCRAFT GREY RAF BARLEY GREY SIGNAL RED DARK GREEN LIGHT GREY SATIN 20 51 19 47 15 69 2 18 10 Testor Ref. No. LC01 LC02 LC06 LC08 LC16 LC10 LC21 LC22 LC35 LC36 LC37 LC39 LC51 LC52 Humbrol Ref. No. ..... 34 ..... 33 ..... 60 ..... 48 ..... 133 ..... 25 ..... 61 ..... 192 ..... 189 ..... 62 ..... 10 ..... 78 ..... 22 ..... 21 Lifecolor Humbrol Ref. No. Ref. No. LC53 LC55 LC56 LC65 LC60 LC66 LC67 LC74 LC75 LC76 UA001 UA002 UA003 UA004 ..... 69 ..... 18 ..... 19 ..... 9 ..... 14 ..... 20 ..... 98 ..... 11 ..... 16 ..... 53 ..... 116 ..... 86 ..... 155 ..... 154 Lifecolor Humbrol Ref. No. Ref. No. UA006 UA008 UA015 UA016 UA019 UA021 UA022 UA023 UA025 UA026 UA027 UA028 UA030 UA033 ..... 150 ..... 149 ..... 118 ..... 142 ..... 168 ..... 28 ..... 125 ..... 147 ..... 129 ..... 127 ..... 128 ..... 126 ..... 123 ..... 140 Lifecolor Humbrol Ref. No. Ref. No. UA035 UA037 UA038 UA039 UA041 UA042 UA042 UA044 UA045 UA046 UA055 UA055 UA059 UA060 ..... 92 ..... 47 ..... 145 ..... 72 ..... 146 ..... 186 ..... 188 ..... 181 ..... 144 ..... 27 ..... 76 ..... 145 ..... 31 ..... 120 Lifecolor Humbrol Ref. No. Ref. No. UA073 UA078 UA079 UA081 UA082 UA088 UA089 UA093 UA095 UA097 UA106 UA108 UA109 UA113 ..... 106 ..... 172 ..... 167 ..... 63 ..... 186 ..... 180 ..... 252 ..... 5 ..... 23 ..... 94 ..... 66 ..... 92 ..... 112 ..... 141 Lifecolor Humbrol Ref. No. Ref. No. UA119 UA124 UA125 UA140 UA134 UA139 UA142 UA143 ..... 108 ..... 65 ..... 119 ..... 154 ..... 81 ..... 122 ..... 114 ..... 98 BS 4800 / 10B21 GAMES WORKSHOP 2 3 5 7 9 10 14 15 EMERALD BRUNSWICK GREEN DARK ADMIRALTY GREY LIGHT BUFF TAN SERVICE BROWN FRENCH BLUE MIDNIGHT BLUE 18 19 20 21 22 35 38 40 ORANGE BRIGHT RED CRIMSON BLACK WHITE VARNISH LIME PALE GREY 41 47 48 68 69 200 208 209 IVORY SEA BLUE MEDITERRANEAN BLUE PURPLE YELLOW PINK FLUORESCENT SIGNAL GREEN FLUORESCENT FIRE ORANGE 220 Humbrol Ref. No. Games Workshop Ref. No. BESTIAL BROWN BLAZING ORANGE BLEACHED BONE BLOOD RED BRAZEN BRASS BUBONIC BROWN CHAINMAIL CHAOS BLACK CODEX GREY DARK FLESH DWARF BRONZE DWARF FLESH ENCHANTED BLUE FIERY ORANGE FORTRESS GREY GOBLIN GREEN ................................. 186 ................................. 82 ................................. 103 ................................. 174 ................................. 12 ................................. 225 ................................. 11 ................................. 33 ...................... 126, 140, 106, 224 ................................. 133 ................................. 55 ................................. 61 ................................. 14* ................................. 18 ................................. 167 ................................. 131 Humbrol Ref. No. Games Workshop Ref. No. GOLDEN YELLOW ................................. ........................... MITHRIL SILVER NAUSEATING BLUE ................................. ................................. RED GORE ................................. REGAL BLUE ................................. SCAB RED SCORCHED BROWN ................................. SCORPION GREEN ................................. ................................. SHADOW GREY ................................. SHINING GOLD ................................. SNOT GREEN SUNBURST YELLOW ................................. ULTRAMARINES BLUE ........................... ................................. VERMIN BROWN ................................. VOMIT BROWN FERRARI RED GLOSS 154 11 25 73 104 73 98 38 157 54 101 69 14* 9 61 *with matt varnish TAMIYA Tamiya Ref. No. 11 12 16 50 51 52 53 54 SILVER COPPER GOLD GREEN MIST SUNSET RED BALTIC BLUE GUNMETAL BRASS 55 56 191 201 222 BRONZE ALUMINIUM CHROME SILVER METALLIC BLACK MOONLIGHT BLUE 27001 27002 27003 27004 ALUMINIUM POLISHED ALUMINIUM POLISHED STEEL GUNMETAL METALLIC METALCOTE X1 ........ X2 ........ X3 ........ X4 ........ X5 ........ X6 ........ X7 ........ X8 ........ X9 ........ X10 ........ 1322 1325 RED ORANGE GREEN CLEAR Colours are reproduced as accurately as print process will allow. 21 22 15 14 3 18 19 69 10 53 Tamiya Ref. No. Humbrol Ref. No. X11 ........ 11 X12 ........ 16 X13 ........ 52 X14 ........ 48 X15 ........ 38 X16 ........ 68 X17 ........ 200 X18 ........ 85 XF1 ........ 33 XF2 ........ 34 Tamiya Ref. No. Humbrol Ref. No. XF3 ........ 99 XF4 ........ 81 XF5 ........ 101 XF6 ........ 12 XF7 ........ 60 XF8 ........ 25 XF9 ........ 73 XF10........ 98 XF11........ 75 XF12........ 64 Tamiya Ref. No. Humbrol Ref. No. XF13 ........116 XF14 ........147 XF15 ........ 61 XF16 ........ 11 XF17 ........104 XF18 ........ 96 XF19 ........ 64 XF20 ........126 XF21 ........ 90 XF22 ........ 92 Tamiya Ref. No. Humbrol Ref. No. XF23 ........ 65 XF24 ........ 112 XF25 ........ 87 XF26 ........ 149 XF27 ........ 91 XF49 ........ 26 XF50 ........ 96 XF52 ........ 29 XF53 ........ 156 XF54 ........ 27 Tamiya Ref. No. Humbrol Ref. No. XF55 ........ 28 XF56 ........ 56 XF57 ........ 83 XF58 ........123 XF59 ........ 63 XF60 ........ 84 XF61 ........ 30 XF62 ........ 66 F.S. F.S. Ref. No. 1321 Humbrol Ref. No. 17038 17178 17875 27038 30117 30219 Humbrol Ref. No. .... .... .... .... .... .... 21 191 22 85 186 118 F.S. Ref. No. 30277 31136 33531 33538 33613 34079 Humbrol Ref. No. .... .... .... .... .... .... 187 153 121 154 148 116 F.S. Ref. No. 34087 34092 34097 34102 34127 34227 Humbrol Ref. No. .... .... .... .... .... .... 155 149 105 117 150 120 F.S. Ref. No. 35164 35237 35622 36081 36118 36173 Humbrol Ref. No. .... .... .... .... .... .... 144 145 122 32 125 156 F.S. Ref. No. 36231 36270 36320 36375 36440 36495 Humbrol Ref. No. .... .... .... .... .... .... 140 126 128 127 129 147 F.S. Ref. No. 36622 37038 37875 27875 30219 Humbrol Ref. No. .... .... .... .... .... 28 33 34 130 119 Cross references are given to identical or similar colours, however no guarantee of accuracy can be given. HUMBROL PAINT COLOURS Revell Ref. No. Buying a model kit is only the start of a pastime enjoyed by millions the world over. 1 23 24 25 26 27 28 29 GREY PRIMER DUCK EGG BLUE TRAINER YELLOW BLUE KHAKI SEA GREY CAMOUFLAGE GREY DARK EARTH 30 31 32 33 34 49 60 61 DARK GREEN SLATE GREY DARK GREY BLACK WHITE VARNISH SCARLET FLESH 62 63 64 65 66 67 70 72 LEATHER SAND LIGHT GREY AIRCRAFT BLUE OLIVE DRAB TANK GREY BRICK RED KHAKI DRILL Generations of modellers, from beginner to experienced professional, have turned to Humbrol products to help them construct and decorate their models to make them works to be proud of. Humbrol have been producing paints, 74 75 76 77 78 79 80 WINE LINEN BRONZE GREEN UNIFORM GREEN NAVY BLUE COCKPIT GREEN BLUE GREY GRASS GREEN varnishes, brushes and other products to enable 81 82 83 84 86 87 88 89 you to get the best results out of your PALE YELLOW ORANGE LINING OCHRE MID STONE LIGHT OLIVE STEEL GREY DECK GREEN MIDDLE BLUE and as well as the famous Enamel product in the iconic Humbrol tinlet, the range includes glues, for use with their plastic model kits. 90 91 93 94 96 98 99 100 BEIGE GREEN BLACK GREEN DESERT YELLOW BROWN YELLOW RAF BLUE CHOCOLATE LEMON RED BROWN 101 102 103 104 105 106 109 110 MID GREEN ARMY GREEN CREAM OXFORD BLUE MARINE GREEN OCEAN GREY WWI BLUE NATURAL WOOD 113 116 117 118 119 120 121 140 RUST US DARK GREEN US LIGHT GREEN US TAN LIGHT EARTH LIGHT GREEN PALE STONE GULL GREY 144 145 147 148 149 150 153 154 INTERMEDIATE BLUE MEDIUM GREY LIGHT GREY RADOME TAN DARK GREEN FOREST GREEN INSIGNIA RED INSIGNIA YELLOW Visit Humbrol at: www.humbrol.com www.airfix.com ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ 35 49 22 34 21 33 85 41 69 24 Revell Ref. No. 16 30 31 35 36 37 45 47 48 51 Humbrol Ref. No. Revell Ref. No. ........ 94 ........ 18 ........ 19 ........ 61 ........ 60 ........ 70 ........ 86 ........ 106 ........ 88 ........ 48 52 53 55 56 57 66 67 71 75 77 Humbrol Ref. No. ........ 14 ........ 68 ........ 65 ........ 25 ........ 106 ........ 66 ........ 91 ........ 112 ........ 64 ........ 79 Revell Ref. No. 78 79 81 85 86 87 88 90 93 94 Humbrol Ref. No. ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ Revell Ref. No. Humbrol Ref. No. 95 ........ 55 96 ........ 51 97 ........ 50 98 ........ 52 99 ........ 56 99 ........ 56 301 ........ 130 302 ........ 85 311 ........ 24 314 ........ 94 67 92 10 62 26 29 94 11 54 16 Revell Ref. No. Humbrol Ref. No. 330 ........ 60 361 ........ 105 363 ........ 195 364 ........ 101 371 ........ 196 374 ........ 128 382 ........ 118 378 ........ 79 382 ........ 118 R.A.L. Humbrol Ref. No. R.A.L. Ref. No. 2004 ....... 18 3000 ....... 19 3004 ....... 20 3026 ....... 209 Humbrol Ref. No. R.A.L. Ref. No. 6003 ....... 117 6020 ....... 195 7000 ....... 145 7009 ....... 91 Humbrol Ref. No. R.A.L. Ref. No. Humbrol Ref. No. 8023 ....... 9001 ....... 9005 ....... 9005 ....... 7012 ....... 79 7031 ....... 27 7035 ....... 196 8017 ....... 10 R.A.L. Ref. No. Humbrol Ref. No. 9010 ....... 22 9010 ....... 130 9011 ....... 33 62 34 21 85 GUNZE SANGYO modelling experience. Humbrol products are recommended by Airfix 1 2 4 5 7 8 9 10 12 15 Humbrol Ref. No. R.A.L. Ref. No. 73 adhesives and other products for over 50 years CONVERSION TABLES REVELL Gunze Sangyo Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 22 21 19 69 15 3 10 11 16 12 34 33 73 18 14 38 Gunze Sangyo Ref. No. 17 19 20 22 23 25 26 27 28 30 31 36 37 39 42 43 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 10 200 49 5 60 48 2 9 201 35 90 75 10 68 144 20 44 45 46 50 52 53 55 56 57 61 64 66 67 68 71 72 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 61 47 2 38 155 128 15 144 147 146 116 62 65 27 84 29 73 74 75 76 78 79 81 87 88 89 98 301 302 303 304 305 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 30 23 27 53 66 93 26 51 52 50 209 32 149 117 155 125 306 307 308 309 310 311 312 313 314 316 317 318 320 325 327 330 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 126 128 127 116 119 28 120 121 122 22 140 148 30 129 153 163 331 332 333 334 335 337 338 340 343 344 346 Humbrol Ref. No. Testor Ref. No. 164 166 123 167 123 145 147 105 33 113 93 TESTOR 155 157 159 160 171 186 187 224 OLIVE DRAB AZURE BLUE KHAKI DRAB GERMAN CAMOUFLAGE RED BROWN ANTIQUE BRONZE BROWN DARK STONE DARK SLATE GREY 230 225 226 250 PRU BLUE MIDDLE STONE INTERIOR GREEN DESERT SAND MATT Testor Ref. No. 1501 1502 1503 1508 1511 1514 1524 1527 1540 Humbrol Ref. No. ...... ...... ...... ...... ...... ...... ...... ...... ...... PAINTS AND ACCESSORIES 1551 1569 1582 1583 1701 1704 1705 1706 1707 ...... 12 ...... 24 ...... 54 ...... 33 ...... 186 ...... 187 ...... 153 ...... 63 ...... 191 1708 1709 1710 1711 1712 1713 1714 1716 1720 ...... 154 ...... 148 ...... 116 ...... 155 ...... 105 ...... 117 ...... 150 ...... 120 ...... 144 1721 1723 1725 1728 1730 1732 1733 1735 1736 ...... 145 ...... 125 ...... 126 ...... 127 ...... 129 ...... 147 ...... 28 ...... 63 ...... 62 1740 1741 1742 1744 1745 1747 1749 1764 1768 ...... 140 ...... 128 ...... 118 ...... 16 ...... 22 ...... 21 ...... 33 ...... 149 ...... 34 1781 2702 2709 2713 2715 2734 Humbrol Ref. No. ...... 56 ...... 52 ...... 41 ...... 201 ...... 14 ...... 11 LIFECOLOR BS 381C 636 Lifecolor Ref. No. 71 85 123 125 126 127 128 129 OAK COAL BLACK EXTRA DARK SEA GREY US DARK GREY US MEDIUM GREY US GHOST GREY US COMPASS GREY US GULL GREY 130 131 132 133 135 156 163 164 WHITE MID GREEN RED BROWN VARNISH DARK CAMOUFLAGE GREY DARK GREEN DARK SEA GREY 168 165 166 167 174 195 196 HEMP MEDIUM SEA GREY LIGHT AIRCRAFT GREY RAF BARLEY GREY SIGNAL RED DARK GREEN LIGHT GREY SATIN 20 51 19 47 15 69 2 18 10 Testor Ref. No. LC01 LC02 LC06 LC08 LC16 LC10 LC21 LC22 LC35 LC36 LC37 LC39 LC51 LC52 Humbrol Ref. No. ..... 34 ..... 33 ..... 60 ..... 48 ..... 133 ..... 25 ..... 61 ..... 192 ..... 189 ..... 62 ..... 10 ..... 78 ..... 22 ..... 21 Lifecolor Humbrol Ref. No. Ref. No. LC53 LC55 LC56 LC65 LC60 LC66 LC67 LC74 LC75 LC76 UA001 UA002 UA003 UA004 ..... 69 ..... 18 ..... 19 ..... 9 ..... 14 ..... 20 ..... 98 ..... 11 ..... 16 ..... 53 ..... 116 ..... 86 ..... 155 ..... 154 Lifecolor Humbrol Ref. No. Ref. No. UA006 UA008 UA015 UA016 UA019 UA021 UA022 UA023 UA025 UA026 UA027 UA028 UA030 UA033 ..... 150 ..... 149 ..... 118 ..... 142 ..... 168 ..... 28 ..... 125 ..... 147 ..... 129 ..... 127 ..... 128 ..... 126 ..... 123 ..... 140 Lifecolor Humbrol Ref. No. Ref. No. UA035 UA037 UA038 UA039 UA041 UA042 UA042 UA044 UA045 UA046 UA055 UA055 UA059 UA060 ..... 92 ..... 47 ..... 145 ..... 72 ..... 146 ..... 186 ..... 188 ..... 181 ..... 144 ..... 27 ..... 76 ..... 145 ..... 31 ..... 120 Lifecolor Humbrol Ref. No. Ref. No. UA073 UA078 UA079 UA081 UA082 UA088 UA089 UA093 UA095 UA097 UA106 UA108 UA109 UA113 ..... 106 ..... 172 ..... 167 ..... 63 ..... 186 ..... 180 ..... 252 ..... 5 ..... 23 ..... 94 ..... 66 ..... 92 ..... 112 ..... 141 Lifecolor Humbrol Ref. No. Ref. No. UA119 UA124 UA125 UA140 UA134 UA139 UA142 UA143 ..... 108 ..... 65 ..... 119 ..... 154 ..... 81 ..... 122 ..... 114 ..... 98 BS 4800 / 10B21 GAMES WORKSHOP 2 3 5 7 9 10 14 15 EMERALD BRUNSWICK GREEN DARK ADMIRALTY GREY LIGHT BUFF TAN SERVICE BROWN FRENCH BLUE MIDNIGHT BLUE 18 19 20 21 22 35 38 40 ORANGE BRIGHT RED CRIMSON BLACK WHITE VARNISH LIME PALE GREY 41 47 48 68 69 200 208 209 IVORY SEA BLUE MEDITERRANEAN BLUE PURPLE YELLOW PINK FLUORESCENT SIGNAL GREEN FLUORESCENT FIRE ORANGE 220 Humbrol Ref. No. Games Workshop Ref. No. BESTIAL BROWN BLAZING ORANGE BLEACHED BONE BLOOD RED BRAZEN BRASS BUBONIC BROWN CHAINMAIL CHAOS BLACK CODEX GREY DARK FLESH DWARF BRONZE DWARF FLESH ENCHANTED BLUE FIERY ORANGE FORTRESS GREY GOBLIN GREEN ................................. 186 ................................. 82 ................................. 103 ................................. 174 ................................. 12 ................................. 225 ................................. 11 ................................. 33 ...................... 126, 140, 106, 224 ................................. 133 ................................. 55 ................................. 61 ................................. 14* ................................. 18 ................................. 167 ................................. 131 Humbrol Ref. No. Games Workshop Ref. No. GOLDEN YELLOW ................................. ........................... MITHRIL SILVER NAUSEATING BLUE ................................. ................................. RED GORE ................................. REGAL BLUE ................................. SCAB RED SCORCHED BROWN ................................. SCORPION GREEN ................................. ................................. SHADOW GREY ................................. SHINING GOLD ................................. SNOT GREEN SUNBURST YELLOW ................................. ULTRAMARINES BLUE ........................... ................................. VERMIN BROWN ................................. VOMIT BROWN FERRARI RED GLOSS 154 11 25 73 104 73 98 38 157 54 101 69 14* 9 61 *with matt varnish TAMIYA Tamiya Ref. No. 11 12 16 50 51 52 53 54 SILVER COPPER GOLD GREEN MIST SUNSET RED BALTIC BLUE GUNMETAL BRASS 55 56 191 201 222 BRONZE ALUMINIUM CHROME SILVER METALLIC BLACK MOONLIGHT BLUE 27001 27002 27003 27004 ALUMINIUM POLISHED ALUMINIUM POLISHED STEEL GUNMETAL METALLIC METALCOTE X1 ........ X2 ........ X3 ........ X4 ........ X5 ........ X6 ........ X7 ........ X8 ........ X9 ........ X10 ........ 1322 1325 RED ORANGE GREEN CLEAR Colours are reproduced as accurately as print process will allow. 21 22 15 14 3 18 19 69 10 53 Tamiya Ref. No. Humbrol Ref. No. X11 ........ 11 X12 ........ 16 X13 ........ 52 X14 ........ 48 X15 ........ 38 X16 ........ 68 X17 ........ 200 X18 ........ 85 XF1 ........ 33 XF2 ........ 34 Tamiya Ref. No. Humbrol Ref. No. XF3 ........ 99 XF4 ........ 81 XF5 ........ 101 XF6 ........ 12 XF7 ........ 60 XF8 ........ 25 XF9 ........ 73 XF10........ 98 XF11........ 75 XF12........ 64 Tamiya Ref. No. Humbrol Ref. No. XF13 ........116 XF14 ........147 XF15 ........ 61 XF16 ........ 11 XF17 ........104 XF18 ........ 96 XF19 ........ 64 XF20 ........126 XF21 ........ 90 XF22 ........ 92 Tamiya Ref. No. Humbrol Ref. No. XF23 ........ 65 XF24 ........ 112 XF25 ........ 87 XF26 ........ 149 XF27 ........ 91 XF49 ........ 26 XF50 ........ 96 XF52 ........ 29 XF53 ........ 156 XF54 ........ 27 Tamiya Ref. No. Humbrol Ref. No. XF55 ........ 28 XF56 ........ 56 XF57 ........ 83 XF58 ........123 XF59 ........ 63 XF60 ........ 84 XF61 ........ 30 XF62 ........ 66 F.S. F.S. Ref. No. 1321 Humbrol Ref. No. 17038 17178 17875 27038 30117 30219 Humbrol Ref. No. .... .... .... .... .... .... 21 191 22 85 186 118 F.S. Ref. No. 30277 31136 33531 33538 33613 34079 Humbrol Ref. No. .... .... .... .... .... .... 187 153 121 154 148 116 F.S. Ref. No. 34087 34092 34097 34102 34127 34227 Humbrol Ref. No. .... .... .... .... .... .... 155 149 105 117 150 120 F.S. Ref. No. 35164 35237 35622 36081 36118 36173 Humbrol Ref. No. .... .... .... .... .... .... 144 145 122 32 125 156 F.S. Ref. No. 36231 36270 36320 36375 36440 36495 Humbrol Ref. No. .... .... .... .... .... .... 140 126 128 127 129 147 F.S. Ref. No. 36622 37038 37875 27875 30219 Humbrol Ref. No. .... .... .... .... .... 28 33 34 130 119 Cross references are given to identical or similar colours, however no guarantee of accuracy can be given. OTHER HUMBROL MODELLING PRODUCTS PAINTS PRODUCT ENAMEL PAINT MODELLERS SPRAY PAINT PRODUCT GLUES POLY CEMENT LIQUID POLY PRECISION POLY CEMENT MODEL FILLER USAGE SUBSTRATE A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates (see right). Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour - please check colour chart on reverse). A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability). A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates (see right). Matt, Satin, Gloss, Metallic and Clear finishes are available (check stockist for colour availability). A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive (always try on a small test area to check suitability). USAGE SUBSTRATE APPLICATION Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners.Two thin coats are preferable to one thick coat.The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. DRYING TIME Gloss: 1-2 hours. Matt & Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight). 14ml tinlet covers approx. 0.3m2 depending on thickness of application. Drying times will vary according to ambient temperature and humidity. Recoat:When wet or after 24 hours. APPLICATION DRYING TIME Dependent on application and thickness of coats. Dependent on application and thickness of coat. A solvent-based cement suitable for plastic model kits only.The product is a low viscosity version of Polycement to enable application by brush. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. Directly onto plastic model kits; an integral brush is supplied. A cocktail stick can be useful to apply sparingly to small areas or fine details. Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Dependent on application and thickness of coat. A solvent-based cement suitable for plastic model kits only. Its viscosity is low to enable precision delivery of fine amounts of cement. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. Directly onto plastic model kits.The bottle lid features a very thin tube to deliver the product sparingly to small areas or fine details. Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Dependent on application and thickness of coat. Directly onto substrate without excessive application of product. If gaps are deep two thin coats are preferable to one thick coat. Surface dry in 1-2 hours. Fully dry in 24 hours. Drying times will vary according to ambient temperature and humidity. Can be removed if not fully dry with Humbrol Enamel Thinners. Product is permanent once dry. HOW TO CLEAN COVERAGE Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Plastic model kits. Product is permanent once dry. As for Enamel paint. Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action. Directly onto plastic model kits. A cocktail stick can be useful to apply sparingly to small areas or fine details. Fills hairline cracks and gaps between plastic parts.The product can be sanded when fully dry using a fine grade of sandpaper and painted. Brushes: use Humbrol Enamel Thinners Airbrush: flush thoroughly using Humbrol Enamel Thinners. Useful hints and tips Some useful things to bear in mind to ensure you get the best results with Humbrol products: PAINTING AND VARNISHING • Parts are best painted before being glued together. Always scrape any paint from the surfaces to be glued to ensure a good bond - glue’s effectiveness is much reduced on a painted surface. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. A solvent-based cement suitable for plastic model kits only. HOW TO CLEAN COVERAGE N.A. Can be removed if not fully dry by re-dissolving with Humbrol Liquid Poly or Precision Poly. • Always stir the paint to ensure a uniform mix throughout the container. • Always apply paint sparingly on important detail so as not to obscure it, or thin the paint down to apply. • When painting camouflage it is helpful to mark out the areas to be painted beforehand with a soft pencil. • When applying several coats of paint always make sure that the previous coats have thoroughly dried, or film ‘wrinkling’ can occur. Product is permanent once dry. • When painting a large area using a brush it is better to use a larger brush to eliminate any brush strokes. Can be removed if not fully dry by re-dissolving with more Liquid Poly or Precision Poly. • Metallics cannot be over-coated; they are designed as a topcoat product only. Product is permanent once dry. Can be removed if not fully dry by re-dissolving with Liquid Poly or more Precision Poly. Product is permanent once dry. • Occasionally deposits of white matting agent can be seen when using Matt or Satin varnish. This can be easily rectified by applying a coat of gloss varnish which will dissolve the matting agent. A coat of Matt or Satin varnish can then be re-applied. Excess filler should be wiped away using a damp cloth. • After using your tinlet of paint always clean around the neck of the container before putting the lid back on. This will give a better seal between lid and tin. Product is permanent once dry. • Allow at least 6 hours between coats - 24 hours is preferable. • When using aerosols it is better to apply several light ‘mist’ coats than one heavy coat. BALSA CEMENT APPLICATION PRODUCTS PRODUCT CLEARFIX DECALFIX MASKOL BRUSHES AIRBRUSH ENAMEL THINNERS A quick-drying transparent cement for balsa, other soft woods and cork. 20 to 30 minutes. Balsa, other soft woods and cork. USAGE SUBSTRATE A solvent-based polymer solution for use as an adhesive on clear plastic parts without the risk of the ‘frosting’ effect sometimes seen using traditional glues and for making small windows or translucent areas of 3mm or less. Common plastics used to manufacture model kits including polystyrene and ABS. A water-based solution for softening decals and securing them into position. Directly onto substrate. Drying times will vary according to ambient temperature and humidity. APPLICATION DRYING TIME N.A. Product is permanent once dry. Overnight. Common plastics used to manufacture model kits including polystyrene and ABS. Decals are usually applied onto painted surfaces. Care should be taken to avoid ‘silvering’ over matt paints. Brush on to decals or immerse them in Decalfix for approx. 45 seconds or until softened. Slide off using a brush and dab dry with tissue paper. 20-30 minutes. Do not try to force dry decals as they may crease or shrivel. N.A. A rubber solution that can be applied to surfaces to prevent them being painted. When the paint has dried the Maskol can be simply peeled off. Common plastics used to manufacture model kits including polystyrene and ABS and a wide variety of other applications including glass. Brush only. Apply to surface, allow to dry and paint over.When paint is dry peel off the Maskol. 15-20 minutes. N.A. Sable hair or pony hair brushes that come in a wide variety of sizes according to whether larger areas or fine detail are to be painted. Brushes can also be cut to a specific profile using fine scissors if required. A wide variety including virtually any modelling or artist’s material including common plastics, canvas, paper, cardboard and many others. A pressurised spray gun that enables spraying of a variety of paints and inks for many art, craft, graphic design and DIY usages. Airbrush and Aerosol Power Pack are purchased separately. Thinning down of solvent-based enamel paints, most commonly for airbrushing. According to the type of paint or ink being used. N.A. Paints will generally require thinning before being airbrushed. It is advisable to do test areas to ensure the right paint consistency and flow of paint through the airbrush. As for the paint being used. HOW TO CLEAN COVERAGE A cocktail stick is usually the most practical means of application. Run a small drop of Clearfix around the edge of the window then draw across the opening to produce a thin membrane. To suit circumstances and modeller. Excess cement should be wiped away using a damp cloth. N.A. Excess product should be wiped away using a damp cloth. Product is permanent once dry. AIRBRUSHING • Airbrushes vary in specification, so it’s useful to do some test spraying on spare plastic or cardboard to get the right application before spraying your model. Humbrol Enamel needs to be thinned for airbrushing: 1-2 parts paint to 1 part Enamel Thinners is usual. Remember, the thinner the paint the more coats you will have to apply. • Keep the paint in the pot uniform at all times when spraying by constantly stirring. This will ensure a consistent finish. • Always spray parallel to the surface being sprayed and don’t spray too close - heavy deposits will cause runs and sags. • Clean your airbrush immediately after use to prevent clogging by flushing through with Humbrol Enamel Thinners. Excess product should be wiped away using a damp cloth. • If the spray becomes weak when using an aerosol power pack it is because the can is starting to chill. Stop spraying and allow the can to warm up to room temperature, or use two cans so you can easily switch between them for efficiency. Peel off when painting is finished. N.A. N.A. According to the type of paint or ink being used. Paint drying times may vary with the additon of Enamel Thinners. According to the type of paint or ink being used and thickness of coating applied. N.A. Excess product should be wiped away using a damp cloth. Acrylic paints: clean using cold water. Enamel or oil-based paints: clean using Humbrol Enamel Thinners. GLUING • It can be useful to do a ‘dry run’ - fitting the parts together without glue to ensure you get it right when it comes to applying your glue. • Never apply too much glue to your model as this can cause bubbles of cement to be squeezed out from bonded surfaces. • Application is easier when using a cocktail stick or toothpick to apply glue. Acrylic paint/ink: flush thoroughly with water. • When glue has been applied the pieces can be held together to ensure optimum bonding. Masking tape, rubber bands or string can all be useful. A clothes peg is excellent for clamping wing halves and other flat items together. Enamel or oil-based paints: flush thoroughly with Humbrol Enamel Thinners. Ensure the airbrush is cleaned after every application, otherwise blocking of the nozzle or colour contamination can occur. • Clear parts need to be held with suction or a clean hand and the glue applied sparingly with a cocktail stick or toothpick. Tweezers are useful for putting these into place. N.A. • If there are gaps between the pieces that have been glued they can be filled with Humbrol Model Filler. When this has dried hard it can be sanded to the contour of the model with a light grade of sandpaper. DECALS PRODUCT USAGE SUBSTRATE APPLICATION DRYING TIME COVERAGE HOW TO CLEAN • Cut the decals out very carefully, keeping as near to the edge of the design as possible. FINISHING PRODUCTS • Immerse in Decalfix for about 45 seconds or until softened. MATT COTE SATIN COTE GLOSS COTE A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, low-sheen matt finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Mattcote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. • Slide the decal off its backing sheet and into position on the model using the tip of a paint brush as this reduces the chance of damage to the decal. • Once in position gently dab the decal with a piece of tissue paper to absorb any excess moisture. A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, mid-sheen satin/eggshell finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Satincote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, high-sheen gloss finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Glosscote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Hornby Hobbies Ltd. Westwood, Margate, Kent, CT9 4JX, England. Tel: +44(0)1843 233500 www.humbrol.com OTHER HUMBROL MODELLING PRODUCTS PAINTS PRODUCT ENAMEL PAINT MODELLERS SPRAY PAINT PRODUCT GLUES POLY CEMENT LIQUID POLY PRECISION POLY CEMENT MODEL FILLER USAGE SUBSTRATE A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates (see right). Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour - please check colour chart on reverse). A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability). A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates (see right). Matt, Satin, Gloss, Metallic and Clear finishes are available (check stockist for colour availability). A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive (always try on a small test area to check suitability). USAGE SUBSTRATE APPLICATION Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners.Two thin coats are preferable to one thick coat.The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. DRYING TIME Gloss: 1-2 hours. Matt & Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight). 14ml tinlet covers approx. 0.3m2 depending on thickness of application. Drying times will vary according to ambient temperature and humidity. Recoat:When wet or after 24 hours. APPLICATION DRYING TIME Dependent on application and thickness of coats. Dependent on application and thickness of coat. A solvent-based cement suitable for plastic model kits only.The product is a low viscosity version of Polycement to enable application by brush. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. Directly onto plastic model kits; an integral brush is supplied. A cocktail stick can be useful to apply sparingly to small areas or fine details. Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Dependent on application and thickness of coat. A solvent-based cement suitable for plastic model kits only. Its viscosity is low to enable precision delivery of fine amounts of cement. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. Directly onto plastic model kits.The bottle lid features a very thin tube to deliver the product sparingly to small areas or fine details. Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Dependent on application and thickness of coat. Directly onto substrate without excessive application of product. If gaps are deep two thin coats are preferable to one thick coat. Surface dry in 1-2 hours. Fully dry in 24 hours. Drying times will vary according to ambient temperature and humidity. Can be removed if not fully dry with Humbrol Enamel Thinners. Product is permanent once dry. HOW TO CLEAN COVERAGE Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Plastic model kits. Product is permanent once dry. As for Enamel paint. Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action. Directly onto plastic model kits. A cocktail stick can be useful to apply sparingly to small areas or fine details. Fills hairline cracks and gaps between plastic parts.The product can be sanded when fully dry using a fine grade of sandpaper and painted. Brushes: use Humbrol Enamel Thinners Airbrush: flush thoroughly using Humbrol Enamel Thinners. Useful hints and tips Some useful things to bear in mind to ensure you get the best results with Humbrol products: PAINTING AND VARNISHING • Parts are best painted before being glued together. Always scrape any paint from the surfaces to be glued to ensure a good bond - glue’s effectiveness is much reduced on a painted surface. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. A solvent-based cement suitable for plastic model kits only. HOW TO CLEAN COVERAGE N.A. Can be removed if not fully dry by re-dissolving with Humbrol Liquid Poly or Precision Poly. • Always stir the paint to ensure a uniform mix throughout the container. • Always apply paint sparingly on important detail so as not to obscure it, or thin the paint down to apply. • When painting camouflage it is helpful to mark out the areas to be painted beforehand with a soft pencil. • When applying several coats of paint always make sure that the previous coats have thoroughly dried, or film ‘wrinkling’ can occur. Product is permanent once dry. • When painting a large area using a brush it is better to use a larger brush to eliminate any brush strokes. Can be removed if not fully dry by re-dissolving with more Liquid Poly or Precision Poly. • Metallics cannot be over-coated; they are designed as a topcoat product only. Product is permanent once dry. Can be removed if not fully dry by re-dissolving with Liquid Poly or more Precision Poly. Product is permanent once dry. • Occasionally deposits of white matting agent can be seen when using Matt or Satin varnish. This can be easily rectified by applying a coat of gloss varnish which will dissolve the matting agent. A coat of Matt or Satin varnish can then be re-applied. Excess filler should be wiped away using a damp cloth. • After using your tinlet of paint always clean around the neck of the container before putting the lid back on. This will give a better seal between lid and tin. Product is permanent once dry. • Allow at least 6 hours between coats - 24 hours is preferable. • When using aerosols it is better to apply several light ‘mist’ coats than one heavy coat. BALSA CEMENT APPLICATION PRODUCTS PRODUCT CLEARFIX DECALFIX MASKOL BRUSHES AIRBRUSH ENAMEL THINNERS A quick-drying transparent cement for balsa, other soft woods and cork. 20 to 30 minutes. Balsa, other soft woods and cork. USAGE SUBSTRATE A solvent-based polymer solution for use as an adhesive on clear plastic parts without the risk of the ‘frosting’ effect sometimes seen using traditional glues and for making small windows or translucent areas of 3mm or less. Common plastics used to manufacture model kits including polystyrene and ABS. A water-based solution for softening decals and securing them into position. Directly onto substrate. Drying times will vary according to ambient temperature and humidity. APPLICATION DRYING TIME N.A. Product is permanent once dry. Overnight. Common plastics used to manufacture model kits including polystyrene and ABS. Decals are usually applied onto painted surfaces. Care should be taken to avoid ‘silvering’ over matt paints. Brush on to decals or immerse them in Decalfix for approx. 45 seconds or until softened. Slide off using a brush and dab dry with tissue paper. 20-30 minutes. Do not try to force dry decals as they may crease or shrivel. N.A. A rubber solution that can be applied to surfaces to prevent them being painted. When the paint has dried the Maskol can be simply peeled off. Common plastics used to manufacture model kits including polystyrene and ABS and a wide variety of other applications including glass. Brush only. Apply to surface, allow to dry and paint over.When paint is dry peel off the Maskol. 15-20 minutes. N.A. Sable hair or pony hair brushes that come in a wide variety of sizes according to whether larger areas or fine detail are to be painted. Brushes can also be cut to a specific profile using fine scissors if required. A wide variety including virtually any modelling or artist’s material including common plastics, canvas, paper, cardboard and many others. A pressurised spray gun that enables spraying of a variety of paints and inks for many art, craft, graphic design and DIY usages. Airbrush and Aerosol Power Pack are purchased separately. Thinning down of solvent-based enamel paints, most commonly for airbrushing. According to the type of paint or ink being used. N.A. Paints will generally require thinning before being airbrushed. It is advisable to do test areas to ensure the right paint consistency and flow of paint through the airbrush. As for the paint being used. HOW TO CLEAN COVERAGE A cocktail stick is usually the most practical means of application. Run a small drop of Clearfix around the edge of the window then draw across the opening to produce a thin membrane. To suit circumstances and modeller. Excess cement should be wiped away using a damp cloth. N.A. Excess product should be wiped away using a damp cloth. Product is permanent once dry. AIRBRUSHING • Airbrushes vary in specification, so it’s useful to do some test spraying on spare plastic or cardboard to get the right application before spraying your model. Humbrol Enamel needs to be thinned for airbrushing: 1-2 parts paint to 1 part Enamel Thinners is usual. Remember, the thinner the paint the more coats you will have to apply. • Keep the paint in the pot uniform at all times when spraying by constantly stirring. This will ensure a consistent finish. • Always spray parallel to the surface being sprayed and don’t spray too close - heavy deposits will cause runs and sags. • Clean your airbrush immediately after use to prevent clogging by flushing through with Humbrol Enamel Thinners. Excess product should be wiped away using a damp cloth. • If the spray becomes weak when using an aerosol power pack it is because the can is starting to chill. Stop spraying and allow the can to warm up to room temperature, or use two cans so you can easily switch between them for efficiency. Peel off when painting is finished. N.A. N.A. According to the type of paint or ink being used. Paint drying times may vary with the additon of Enamel Thinners. According to the type of paint or ink being used and thickness of coating applied. N.A. Excess product should be wiped away using a damp cloth. Acrylic paints: clean using cold water. Enamel or oil-based paints: clean using Humbrol Enamel Thinners. GLUING • It can be useful to do a ‘dry run’ - fitting the parts together without glue to ensure you get it right when it comes to applying your glue. • Never apply too much glue to your model as this can cause bubbles of cement to be squeezed out from bonded surfaces. • Application is easier when using a cocktail stick or toothpick to apply glue. Acrylic paint/ink: flush thoroughly with water. • When glue has been applied the pieces can be held together to ensure optimum bonding. Masking tape, rubber bands or string can all be useful. A clothes peg is excellent for clamping wing halves and other flat items together. Enamel or oil-based paints: flush thoroughly with Humbrol Enamel Thinners. Ensure the airbrush is cleaned after every application, otherwise blocking of the nozzle or colour contamination can occur. • Clear parts need to be held with suction or a clean hand and the glue applied sparingly with a cocktail stick or toothpick. Tweezers are useful for putting these into place. N.A. • If there are gaps between the pieces that have been glued they can be filled with Humbrol Model Filler. When this has dried hard it can be sanded to the contour of the model with a light grade of sandpaper. DECALS PRODUCT USAGE SUBSTRATE APPLICATION DRYING TIME COVERAGE HOW TO CLEAN • Cut the decals out very carefully, keeping as near to the edge of the design as possible. FINISHING PRODUCTS • Immerse in Decalfix for about 45 seconds or until softened. MATT COTE SATIN COTE GLOSS COTE A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, low-sheen matt finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Mattcote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. • Slide the decal off its backing sheet and into position on the model using the tip of a paint brush as this reduces the chance of damage to the decal. • Once in position gently dab the decal with a piece of tissue paper to absorb any excess moisture. A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, mid-sheen satin/eggshell finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Satincote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, high-sheen gloss finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Glosscote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Hornby Hobbies Ltd. Westwood, Margate, Kent, CT9 4JX, England. Tel: +44(0)1843 233500 www.humbrol.com OTHER HUMBROL MODELLING PRODUCTS PAINTS PRODUCT ENAMEL PAINT MODELLERS SPRAY PAINT PRODUCT GLUES POLY CEMENT LIQUID POLY PRECISION POLY CEMENT MODEL FILLER USAGE SUBSTRATE A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates (see right). Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour - please check colour chart on reverse). A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability). A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates (see right). Matt, Satin, Gloss, Metallic and Clear finishes are available (check stockist for colour availability). A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive (always try on a small test area to check suitability). USAGE SUBSTRATE APPLICATION Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners.Two thin coats are preferable to one thick coat.The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. DRYING TIME Gloss: 1-2 hours. Matt & Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight). 14ml tinlet covers approx. 0.3m2 depending on thickness of application. Drying times will vary according to ambient temperature and humidity. Recoat:When wet or after 24 hours. APPLICATION DRYING TIME Dependent on application and thickness of coats. Dependent on application and thickness of coat. A solvent-based cement suitable for plastic model kits only.The product is a low viscosity version of Polycement to enable application by brush. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. Directly onto plastic model kits; an integral brush is supplied. A cocktail stick can be useful to apply sparingly to small areas or fine details. Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Dependent on application and thickness of coat. A solvent-based cement suitable for plastic model kits only. Its viscosity is low to enable precision delivery of fine amounts of cement. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. Directly onto plastic model kits.The bottle lid features a very thin tube to deliver the product sparingly to small areas or fine details. Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Dependent on application and thickness of coat. Directly onto substrate without excessive application of product. If gaps are deep two thin coats are preferable to one thick coat. Surface dry in 1-2 hours. Fully dry in 24 hours. Drying times will vary according to ambient temperature and humidity. Can be removed if not fully dry with Humbrol Enamel Thinners. Product is permanent once dry. HOW TO CLEAN COVERAGE Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Plastic model kits. Product is permanent once dry. As for Enamel paint. Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action. Directly onto plastic model kits. A cocktail stick can be useful to apply sparingly to small areas or fine details. Fills hairline cracks and gaps between plastic parts.The product can be sanded when fully dry using a fine grade of sandpaper and painted. Brushes: use Humbrol Enamel Thinners Airbrush: flush thoroughly using Humbrol Enamel Thinners. Useful hints and tips Some useful things to bear in mind to ensure you get the best results with Humbrol products: PAINTING AND VARNISHING • Parts are best painted before being glued together. Always scrape any paint from the surfaces to be glued to ensure a good bond - glue’s effectiveness is much reduced on a painted surface. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. A solvent-based cement suitable for plastic model kits only. HOW TO CLEAN COVERAGE N.A. Can be removed if not fully dry by re-dissolving with Humbrol Liquid Poly or Precision Poly. • Always stir the paint to ensure a uniform mix throughout the container. • Always apply paint sparingly on important detail so as not to obscure it, or thin the paint down to apply. • When painting camouflage it is helpful to mark out the areas to be painted beforehand with a soft pencil. • When applying several coats of paint always make sure that the previous coats have thoroughly dried, or film ‘wrinkling’ can occur. Product is permanent once dry. • When painting a large area using a brush it is better to use a larger brush to eliminate any brush strokes. Can be removed if not fully dry by re-dissolving with more Liquid Poly or Precision Poly. • Metallics cannot be over-coated; they are designed as a topcoat product only. Product is permanent once dry. Can be removed if not fully dry by re-dissolving with Liquid Poly or more Precision Poly. Product is permanent once dry. • Occasionally deposits of white matting agent can be seen when using Matt or Satin varnish. This can be easily rectified by applying a coat of gloss varnish which will dissolve the matting agent. A coat of Matt or Satin varnish can then be re-applied. Excess filler should be wiped away using a damp cloth. • After using your tinlet of paint always clean around the neck of the container before putting the lid back on. This will give a better seal between lid and tin. Product is permanent once dry. • Allow at least 6 hours between coats - 24 hours is preferable. • When using aerosols it is better to apply several light ‘mist’ coats than one heavy coat. BALSA CEMENT APPLICATION PRODUCTS PRODUCT CLEARFIX DECALFIX MASKOL BRUSHES AIRBRUSH ENAMEL THINNERS A quick-drying transparent cement for balsa, other soft woods and cork. 20 to 30 minutes. Balsa, other soft woods and cork. USAGE SUBSTRATE A solvent-based polymer solution for use as an adhesive on clear plastic parts without the risk of the ‘frosting’ effect sometimes seen using traditional glues and for making small windows or translucent areas of 3mm or less. Common plastics used to manufacture model kits including polystyrene and ABS. A water-based solution for softening decals and securing them into position. Directly onto substrate. Drying times will vary according to ambient temperature and humidity. APPLICATION DRYING TIME N.A. Product is permanent once dry. Overnight. Common plastics used to manufacture model kits including polystyrene and ABS. Decals are usually applied onto painted surfaces. Care should be taken to avoid ‘silvering’ over matt paints. Brush on to decals or immerse them in Decalfix for approx. 45 seconds or until softened. Slide off using a brush and dab dry with tissue paper. 20-30 minutes. Do not try to force dry decals as they may crease or shrivel. N.A. A rubber solution that can be applied to surfaces to prevent them being painted. When the paint has dried the Maskol can be simply peeled off. Common plastics used to manufacture model kits including polystyrene and ABS and a wide variety of other applications including glass. Brush only. Apply to surface, allow to dry and paint over.When paint is dry peel off the Maskol. 15-20 minutes. N.A. Sable hair or pony hair brushes that come in a wide variety of sizes according to whether larger areas or fine detail are to be painted. Brushes can also be cut to a specific profile using fine scissors if required. A wide variety including virtually any modelling or artist’s material including common plastics, canvas, paper, cardboard and many others. A pressurised spray gun that enables spraying of a variety of paints and inks for many art, craft, graphic design and DIY usages. Airbrush and Aerosol Power Pack are purchased separately. Thinning down of solvent-based enamel paints, most commonly for airbrushing. According to the type of paint or ink being used. N.A. Paints will generally require thinning before being airbrushed. It is advisable to do test areas to ensure the right paint consistency and flow of paint through the airbrush. As for the paint being used. HOW TO CLEAN COVERAGE A cocktail stick is usually the most practical means of application. Run a small drop of Clearfix around the edge of the window then draw across the opening to produce a thin membrane. To suit circumstances and modeller. Excess cement should be wiped away using a damp cloth. N.A. Excess product should be wiped away using a damp cloth. Product is permanent once dry. AIRBRUSHING • Airbrushes vary in specification, so it’s useful to do some test spraying on spare plastic or cardboard to get the right application before spraying your model. Humbrol Enamel needs to be thinned for airbrushing: 1-2 parts paint to 1 part Enamel Thinners is usual. Remember, the thinner the paint the more coats you will have to apply. • Keep the paint in the pot uniform at all times when spraying by constantly stirring. This will ensure a consistent finish. • Always spray parallel to the surface being sprayed and don’t spray too close - heavy deposits will cause runs and sags. • Clean your airbrush immediately after use to prevent clogging by flushing through with Humbrol Enamel Thinners. Excess product should be wiped away using a damp cloth. • If the spray becomes weak when using an aerosol power pack it is because the can is starting to chill. Stop spraying and allow the can to warm up to room temperature, or use two cans so you can easily switch between them for efficiency. Peel off when painting is finished. N.A. N.A. According to the type of paint or ink being used. Paint drying times may vary with the additon of Enamel Thinners. According to the type of paint or ink being used and thickness of coating applied. N.A. Excess product should be wiped away using a damp cloth. Acrylic paints: clean using cold water. Enamel or oil-based paints: clean using Humbrol Enamel Thinners. GLUING • It can be useful to do a ‘dry run’ - fitting the parts together without glue to ensure you get it right when it comes to applying your glue. • Never apply too much glue to your model as this can cause bubbles of cement to be squeezed out from bonded surfaces. • Application is easier when using a cocktail stick or toothpick to apply glue. Acrylic paint/ink: flush thoroughly with water. • When glue has been applied the pieces can be held together to ensure optimum bonding. Masking tape, rubber bands or string can all be useful. A clothes peg is excellent for clamping wing halves and other flat items together. Enamel or oil-based paints: flush thoroughly with Humbrol Enamel Thinners. Ensure the airbrush is cleaned after every application, otherwise blocking of the nozzle or colour contamination can occur. • Clear parts need to be held with suction or a clean hand and the glue applied sparingly with a cocktail stick or toothpick. Tweezers are useful for putting these into place. N.A. • If there are gaps between the pieces that have been glued they can be filled with Humbrol Model Filler. When this has dried hard it can be sanded to the contour of the model with a light grade of sandpaper. DECALS PRODUCT USAGE SUBSTRATE APPLICATION DRYING TIME COVERAGE HOW TO CLEAN • Cut the decals out very carefully, keeping as near to the edge of the design as possible. FINISHING PRODUCTS • Immerse in Decalfix for about 45 seconds or until softened. MATT COTE SATIN COTE GLOSS COTE A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, low-sheen matt finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Mattcote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. • Slide the decal off its backing sheet and into position on the model using the tip of a paint brush as this reduces the chance of damage to the decal. • Once in position gently dab the decal with a piece of tissue paper to absorb any excess moisture. A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, mid-sheen satin/eggshell finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Satincote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, high-sheen gloss finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Glosscote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Hornby Hobbies Ltd. Westwood, Margate, Kent, CT9 4JX, England. Tel: +44(0)1843 233500 www.humbrol.com OTHER HUMBROL MODELLING PRODUCTS PAINTS PRODUCT ENAMEL PAINT MODELLERS SPRAY PAINT PRODUCT GLUES POLY CEMENT LIQUID POLY PRECISION POLY CEMENT MODEL FILLER USAGE SUBSTRATE A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates (see right). Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour - please check colour chart on reverse). A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability). A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates (see right). Matt, Satin, Gloss, Metallic and Clear finishes are available (check stockist for colour availability). A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive (always try on a small test area to check suitability). USAGE SUBSTRATE APPLICATION Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners.Two thin coats are preferable to one thick coat.The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. DRYING TIME Gloss: 1-2 hours. Matt & Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight). 14ml tinlet covers approx. 0.3m2 depending on thickness of application. Drying times will vary according to ambient temperature and humidity. Recoat:When wet or after 24 hours. APPLICATION DRYING TIME Dependent on application and thickness of coats. Dependent on application and thickness of coat. A solvent-based cement suitable for plastic model kits only.The product is a low viscosity version of Polycement to enable application by brush. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. Directly onto plastic model kits; an integral brush is supplied. A cocktail stick can be useful to apply sparingly to small areas or fine details. Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Dependent on application and thickness of coat. A solvent-based cement suitable for plastic model kits only. Its viscosity is low to enable precision delivery of fine amounts of cement. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. Directly onto plastic model kits.The bottle lid features a very thin tube to deliver the product sparingly to small areas or fine details. Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Dependent on application and thickness of coat. Directly onto substrate without excessive application of product. If gaps are deep two thin coats are preferable to one thick coat. Surface dry in 1-2 hours. Fully dry in 24 hours. Drying times will vary according to ambient temperature and humidity. Can be removed if not fully dry with Humbrol Enamel Thinners. Product is permanent once dry. HOW TO CLEAN COVERAGE Surface dry in 10-20 mins. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity. Plastic model kits. Product is permanent once dry. As for Enamel paint. Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action. Directly onto plastic model kits. A cocktail stick can be useful to apply sparingly to small areas or fine details. Fills hairline cracks and gaps between plastic parts.The product can be sanded when fully dry using a fine grade of sandpaper and painted. Brushes: use Humbrol Enamel Thinners Airbrush: flush thoroughly using Humbrol Enamel Thinners. Useful hints and tips Some useful things to bear in mind to ensure you get the best results with Humbrol products: PAINTING AND VARNISHING • Parts are best painted before being glued together. Always scrape any paint from the surfaces to be glued to ensure a good bond - glue’s effectiveness is much reduced on a painted surface. Common plastics used to manufacture model kits including polystyrene and ABS.The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond. A solvent-based cement suitable for plastic model kits only. HOW TO CLEAN COVERAGE N.A. Can be removed if not fully dry by re-dissolving with Humbrol Liquid Poly or Precision Poly. • Always stir the paint to ensure a uniform mix throughout the container. • Always apply paint sparingly on important detail so as not to obscure it, or thin the paint down to apply. • When painting camouflage it is helpful to mark out the areas to be painted beforehand with a soft pencil. • When applying several coats of paint always make sure that the previous coats have thoroughly dried, or film ‘wrinkling’ can occur. Product is permanent once dry. • When painting a large area using a brush it is better to use a larger brush to eliminate any brush strokes. Can be removed if not fully dry by re-dissolving with more Liquid Poly or Precision Poly. • Metallics cannot be over-coated; they are designed as a topcoat product only. Product is permanent once dry. Can be removed if not fully dry by re-dissolving with Liquid Poly or more Precision Poly. Product is permanent once dry. • Occasionally deposits of white matting agent can be seen when using Matt or Satin varnish. This can be easily rectified by applying a coat of gloss varnish which will dissolve the matting agent. A coat of Matt or Satin varnish can then be re-applied. Excess filler should be wiped away using a damp cloth. • After using your tinlet of paint always clean around the neck of the container before putting the lid back on. This will give a better seal between lid and tin. Product is permanent once dry. • Allow at least 6 hours between coats - 24 hours is preferable. • When using aerosols it is better to apply several light ‘mist’ coats than one heavy coat. BALSA CEMENT APPLICATION PRODUCTS PRODUCT CLEARFIX DECALFIX MASKOL BRUSHES AIRBRUSH ENAMEL THINNERS A quick-drying transparent cement for balsa, other soft woods and cork. 20 to 30 minutes. Balsa, other soft woods and cork. USAGE SUBSTRATE A solvent-based polymer solution for use as an adhesive on clear plastic parts without the risk of the ‘frosting’ effect sometimes seen using traditional glues and for making small windows or translucent areas of 3mm or less. Common plastics used to manufacture model kits including polystyrene and ABS. A water-based solution for softening decals and securing them into position. Directly onto substrate. Drying times will vary according to ambient temperature and humidity. APPLICATION DRYING TIME N.A. Product is permanent once dry. Overnight. Common plastics used to manufacture model kits including polystyrene and ABS. Decals are usually applied onto painted surfaces. Care should be taken to avoid ‘silvering’ over matt paints. Brush on to decals or immerse them in Decalfix for approx. 45 seconds or until softened. Slide off using a brush and dab dry with tissue paper. 20-30 minutes. Do not try to force dry decals as they may crease or shrivel. N.A. A rubber solution that can be applied to surfaces to prevent them being painted. When the paint has dried the Maskol can be simply peeled off. Common plastics used to manufacture model kits including polystyrene and ABS and a wide variety of other applications including glass. Brush only. Apply to surface, allow to dry and paint over.When paint is dry peel off the Maskol. 15-20 minutes. N.A. Sable hair or pony hair brushes that come in a wide variety of sizes according to whether larger areas or fine detail are to be painted. Brushes can also be cut to a specific profile using fine scissors if required. A wide variety including virtually any modelling or artist’s material including common plastics, canvas, paper, cardboard and many others. A pressurised spray gun that enables spraying of a variety of paints and inks for many art, craft, graphic design and DIY usages. Airbrush and Aerosol Power Pack are purchased separately. Thinning down of solvent-based enamel paints, most commonly for airbrushing. According to the type of paint or ink being used. N.A. Paints will generally require thinning before being airbrushed. It is advisable to do test areas to ensure the right paint consistency and flow of paint through the airbrush. As for the paint being used. HOW TO CLEAN COVERAGE A cocktail stick is usually the most practical means of application. Run a small drop of Clearfix around the edge of the window then draw across the opening to produce a thin membrane. To suit circumstances and modeller. Excess cement should be wiped away using a damp cloth. N.A. Excess product should be wiped away using a damp cloth. Product is permanent once dry. AIRBRUSHING • Airbrushes vary in specification, so it’s useful to do some test spraying on spare plastic or cardboard to get the right application before spraying your model. Humbrol Enamel needs to be thinned for airbrushing: 1-2 parts paint to 1 part Enamel Thinners is usual. Remember, the thinner the paint the more coats you will have to apply. • Keep the paint in the pot uniform at all times when spraying by constantly stirring. This will ensure a consistent finish. • Always spray parallel to the surface being sprayed and don’t spray too close - heavy deposits will cause runs and sags. • Clean your airbrush immediately after use to prevent clogging by flushing through with Humbrol Enamel Thinners. Excess product should be wiped away using a damp cloth. • If the spray becomes weak when using an aerosol power pack it is because the can is starting to chill. Stop spraying and allow the can to warm up to room temperature, or use two cans so you can easily switch between them for efficiency. Peel off when painting is finished. N.A. N.A. According to the type of paint or ink being used. Paint drying times may vary with the additon of Enamel Thinners. According to the type of paint or ink being used and thickness of coating applied. N.A. Excess product should be wiped away using a damp cloth. Acrylic paints: clean using cold water. Enamel or oil-based paints: clean using Humbrol Enamel Thinners. GLUING • It can be useful to do a ‘dry run’ - fitting the parts together without glue to ensure you get it right when it comes to applying your glue. • Never apply too much glue to your model as this can cause bubbles of cement to be squeezed out from bonded surfaces. • Application is easier when using a cocktail stick or toothpick to apply glue. Acrylic paint/ink: flush thoroughly with water. • When glue has been applied the pieces can be held together to ensure optimum bonding. Masking tape, rubber bands or string can all be useful. A clothes peg is excellent for clamping wing halves and other flat items together. Enamel or oil-based paints: flush thoroughly with Humbrol Enamel Thinners. Ensure the airbrush is cleaned after every application, otherwise blocking of the nozzle or colour contamination can occur. • Clear parts need to be held with suction or a clean hand and the glue applied sparingly with a cocktail stick or toothpick. Tweezers are useful for putting these into place. N.A. • If there are gaps between the pieces that have been glued they can be filled with Humbrol Model Filler. When this has dried hard it can be sanded to the contour of the model with a light grade of sandpaper. DECALS PRODUCT USAGE SUBSTRATE APPLICATION DRYING TIME COVERAGE HOW TO CLEAN • Cut the decals out very carefully, keeping as near to the edge of the design as possible. FINISHING PRODUCTS • Immerse in Decalfix for about 45 seconds or until softened. MATT COTE SATIN COTE GLOSS COTE A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, low-sheen matt finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Mattcote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. • Slide the decal off its backing sheet and into position on the model using the tip of a paint brush as this reduces the chance of damage to the decal. • Once in position gently dab the decal with a piece of tissue paper to absorb any excess moisture. A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, mid-sheen satin/eggshell finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Satincote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes.The product dries to a smooth, high-sheen gloss finish. Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Glosscote is usually applied as the final coat to a fully painted and decaled model. Brush or airbrush.Thin suitably when airbrushing using Humbrol Enamel Thinners. Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours. Dependent on application and thickness of coats. Brush: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Hornby Hobbies Ltd. Westwood, Margate, Kent, CT9 4JX, England. Tel: +44(0)1843 233500 www.humbrol.com HUMBROL PAINT COLOURS Revell Ref. No. Buying a model kit is only the start of a pastime enjoyed by millions the world over. 1 23 24 25 26 27 28 29 GREY PRIMER DUCK EGG BLUE TRAINER YELLOW BLUE KHAKI SEA GREY CAMOUFLAGE GREY DARK EARTH 30 31 32 33 34 49 60 61 DARK GREEN SLATE GREY DARK GREY BLACK WHITE VARNISH SCARLET FLESH 62 63 64 65 66 67 70 72 LEATHER SAND LIGHT GREY AIRCRAFT BLUE OLIVE DRAB TANK GREY BRICK RED KHAKI DRILL Generations of modellers, from beginner to experienced professional, have turned to Humbrol products to help them construct and decorate their models to make them works to be proud of. Humbrol have been producing paints, 74 75 76 77 78 79 80 WINE LINEN BRONZE GREEN UNIFORM GREEN NAVY BLUE COCKPIT GREEN BLUE GREY GRASS GREEN varnishes, brushes and other products to enable 81 82 83 84 86 87 88 89 you to get the best results out of your PALE YELLOW ORANGE LINING OCHRE MID STONE LIGHT OLIVE STEEL GREY DECK GREEN MIDDLE BLUE and as well as the famous Enamel product in the iconic Humbrol tinlet, the range includes glues, for use with their plastic model kits. 90 91 93 94 96 98 99 100 BEIGE GREEN BLACK GREEN DESERT YELLOW BROWN YELLOW RAF BLUE CHOCOLATE LEMON RED BROWN 101 102 103 104 105 106 109 110 MID GREEN ARMY GREEN CREAM OXFORD BLUE MARINE GREEN OCEAN GREY WWI BLUE NATURAL WOOD 113 116 117 118 119 120 121 140 RUST US DARK GREEN US LIGHT GREEN US TAN LIGHT EARTH LIGHT GREEN PALE STONE GULL GREY 144 145 147 148 149 150 153 154 INTERMEDIATE BLUE MEDIUM GREY LIGHT GREY RADOME TAN DARK GREEN FOREST GREEN INSIGNIA RED INSIGNIA YELLOW Visit Humbrol at: www.humbrol.com www.airfix.com ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ 35 49 22 34 21 33 85 41 69 24 Revell Ref. No. 16 30 31 35 36 37 45 47 48 51 Humbrol Ref. No. Revell Ref. No. ........ 94 ........ 18 ........ 19 ........ 61 ........ 60 ........ 70 ........ 86 ........ 106 ........ 88 ........ 48 52 53 55 56 57 66 67 71 75 77 Humbrol Ref. No. ........ 14 ........ 68 ........ 65 ........ 25 ........ 106 ........ 66 ........ 91 ........ 112 ........ 64 ........ 79 Revell Ref. No. 78 79 81 85 86 87 88 90 93 94 Humbrol Ref. No. ........ ........ ........ ........ ........ ........ ........ ........ ........ ........ Revell Ref. No. Humbrol Ref. No. 95 ........ 55 96 ........ 51 97 ........ 50 98 ........ 52 99 ........ 56 99 ........ 56 301 ........ 130 302 ........ 85 311 ........ 24 314 ........ 94 67 92 10 62 26 29 94 11 54 16 Revell Ref. No. Humbrol Ref. No. 330 ........ 60 361 ........ 105 363 ........ 195 364 ........ 101 371 ........ 196 374 ........ 128 382 ........ 118 378 ........ 79 382 ........ 118 R.A.L. Humbrol Ref. No. R.A.L. Ref. No. 2004 ....... 18 3000 ....... 19 3004 ....... 20 3026 ....... 209 Humbrol Ref. No. R.A.L. Ref. No. 6003 ....... 117 6020 ....... 195 7000 ....... 145 7009 ....... 91 Humbrol Ref. No. R.A.L. Ref. No. Humbrol Ref. No. 8023 ....... 9001 ....... 9005 ....... 9005 ....... 7012 ....... 79 7031 ....... 27 7035 ....... 196 8017 ....... 10 R.A.L. Ref. No. Humbrol Ref. No. 9010 ....... 22 9010 ....... 130 9011 ....... 33 62 34 21 85 GUNZE SANGYO modelling experience. Humbrol products are recommended by Airfix 1 2 4 5 7 8 9 10 12 15 Humbrol Ref. No. R.A.L. Ref. No. 73 adhesives and other products for over 50 years CONVERSION TABLES REVELL Gunze Sangyo Ref. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 22 21 19 69 15 3 10 11 16 12 34 33 73 18 14 38 Gunze Sangyo Ref. No. 17 19 20 22 23 25 26 27 28 30 31 36 37 39 42 43 Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 10 200 49 5 60 48 2 9 201 35 90 75 10 68 144 20 44 45 46 50 52 53 55 56 57 61 64 66 67 68 71 72 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 61 47 2 38 155 128 15 144 147 146 116 62 65 27 84 29 73 74 75 76 78 79 81 87 88 89 98 301 302 303 304 305 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 30 23 27 53 66 93 26 51 52 50 209 32 149 117 155 125 306 307 308 309 310 311 312 313 314 316 317 318 320 325 327 330 Humbrol Ref. No. Testor Ref. No. Gunze Sangyo Ref. No. Humbrol Ref. No. ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 126 128 127 116 119 28 120 121 122 22 140 148 30 129 153 163 331 332 333 334 335 337 338 340 343 344 346 Humbrol Ref. No. Testor Ref. No. 164 166 123 167 123 145 147 105 33 113 93 TESTOR 155 157 159 160 171 186 187 224 OLIVE DRAB AZURE BLUE KHAKI DRAB GERMAN CAMOUFLAGE RED BROWN ANTIQUE BRONZE BROWN DARK STONE DARK SLATE GREY 230 225 226 250 PRU BLUE MIDDLE STONE INTERIOR GREEN DESERT SAND MATT Testor Ref. No. 1501 1502 1503 1508 1511 1514 1524 1527 1540 Humbrol Ref. No. ...... ...... ...... ...... ...... ...... ...... ...... ...... PAINTS AND ACCESSORIES 1551 1569 1582 1583 1701 1704 1705 1706 1707 ...... 12 ...... 24 ...... 54 ...... 33 ...... 186 ...... 187 ...... 153 ...... 63 ...... 191 1708 1709 1710 1711 1712 1713 1714 1716 1720 ...... 154 ...... 148 ...... 116 ...... 155 ...... 105 ...... 117 ...... 150 ...... 120 ...... 144 1721 1723 1725 1728 1730 1732 1733 1735 1736 ...... 145 ...... 125 ...... 126 ...... 127 ...... 129 ...... 147 ...... 28 ...... 63 ...... 62 1740 1741 1742 1744 1745 1747 1749 1764 1768 ...... 140 ...... 128 ...... 118 ...... 16 ...... 22 ...... 21 ...... 33 ...... 149 ...... 34 1781 2702 2709 2713 2715 2734 Humbrol Ref. No. ...... 56 ...... 52 ...... 41 ...... 201 ...... 14 ...... 11 LIFECOLOR BS 381C 636 Lifecolor Ref. No. 71 85 123 125 126 127 128 129 OAK COAL BLACK EXTRA DARK SEA GREY US DARK GREY US MEDIUM GREY US GHOST GREY US COMPASS GREY US GULL GREY 130 131 132 133 135 156 163 164 WHITE MID GREEN RED BROWN VARNISH DARK CAMOUFLAGE GREY DARK GREEN DARK SEA GREY 168 165 166 167 174 195 196 HEMP MEDIUM SEA GREY LIGHT AIRCRAFT GREY RAF BARLEY GREY SIGNAL RED DARK GREEN LIGHT GREY SATIN 20 51 19 47 15 69 2 18 10 Testor Ref. No. LC01 LC02 LC06 LC08 LC16 LC10 LC21 LC22 LC35 LC36 LC37 LC39 LC51 LC52 Humbrol Ref. No. ..... 34 ..... 33 ..... 60 ..... 48 ..... 133 ..... 25 ..... 61 ..... 192 ..... 189 ..... 62 ..... 10 ..... 78 ..... 22 ..... 21 Lifecolor Humbrol Ref. No. Ref. No. LC53 LC55 LC56 LC65 LC60 LC66 LC67 LC74 LC75 LC76 UA001 UA002 UA003 UA004 ..... 69 ..... 18 ..... 19 ..... 9 ..... 14 ..... 20 ..... 98 ..... 11 ..... 16 ..... 53 ..... 116 ..... 86 ..... 155 ..... 154 Lifecolor Humbrol Ref. No. Ref. No. UA006 UA008 UA015 UA016 UA019 UA021 UA022 UA023 UA025 UA026 UA027 UA028 UA030 UA033 ..... 150 ..... 149 ..... 118 ..... 142 ..... 168 ..... 28 ..... 125 ..... 147 ..... 129 ..... 127 ..... 128 ..... 126 ..... 123 ..... 140 Lifecolor Humbrol Ref. No. Ref. No. UA035 UA037 UA038 UA039 UA041 UA042 UA042 UA044 UA045 UA046 UA055 UA055 UA059 UA060 ..... 92 ..... 47 ..... 145 ..... 72 ..... 146 ..... 186 ..... 188 ..... 181 ..... 144 ..... 27 ..... 76 ..... 145 ..... 31 ..... 120 Lifecolor Humbrol Ref. No. Ref. No. UA073 UA078 UA079 UA081 UA082 UA088 UA089 UA093 UA095 UA097 UA106 UA108 UA109 UA113 ..... 106 ..... 172 ..... 167 ..... 63 ..... 186 ..... 180 ..... 252 ..... 5 ..... 23 ..... 94 ..... 66 ..... 92 ..... 112 ..... 141 Lifecolor Humbrol Ref. No. Ref. No. UA119 UA124 UA125 UA140 UA134 UA139 UA142 UA143 ..... 108 ..... 65 ..... 119 ..... 154 ..... 81 ..... 122 ..... 114 ..... 98 BS 4800 / 10B21 GAMES WORKSHOP 2 3 5 7 9 10 14 15 EMERALD BRUNSWICK GREEN DARK ADMIRALTY GREY LIGHT BUFF TAN SERVICE BROWN FRENCH BLUE MIDNIGHT BLUE 18 19 20 21 22 35 38 40 ORANGE BRIGHT RED CRIMSON BLACK WHITE VARNISH LIME PALE GREY 41 47 48 68 69 200 208 209 IVORY SEA BLUE MEDITERRANEAN BLUE PURPLE YELLOW PINK FLUORESCENT SIGNAL GREEN FLUORESCENT FIRE ORANGE 220 Humbrol Ref. No. Games Workshop Ref. No. BESTIAL BROWN BLAZING ORANGE BLEACHED BONE BLOOD RED BRAZEN BRASS BUBONIC BROWN CHAINMAIL CHAOS BLACK CODEX GREY DARK FLESH DWARF BRONZE DWARF FLESH ENCHANTED BLUE FIERY ORANGE FORTRESS GREY GOBLIN GREEN ................................. 186 ................................. 82 ................................. 103 ................................. 174 ................................. 12 ................................. 225 ................................. 11 ................................. 33 ...................... 126, 140, 106, 224 ................................. 133 ................................. 55 ................................. 61 ................................. 14* ................................. 18 ................................. 167 ................................. 131 Humbrol Ref. No. Games Workshop Ref. No. GOLDEN YELLOW ................................. ........................... MITHRIL SILVER NAUSEATING BLUE ................................. ................................. RED GORE ................................. REGAL BLUE ................................. SCAB RED SCORCHED BROWN ................................. SCORPION GREEN ................................. ................................. SHADOW GREY ................................. SHINING GOLD ................................. SNOT GREEN SUNBURST YELLOW ................................. ULTRAMARINES BLUE ........................... ................................. VERMIN BROWN ................................. VOMIT BROWN FERRARI RED GLOSS 154 11 25 73 104 73 98 38 157 54 101 69 14* 9 61 *with matt varnish TAMIYA Tamiya Ref. No. 11 12 16 50 51 52 53 54 SILVER COPPER GOLD GREEN MIST SUNSET RED BALTIC BLUE GUNMETAL BRASS 55 56 191 201 222 BRONZE ALUMINIUM CHROME SILVER METALLIC BLACK MOONLIGHT BLUE 27001 27002 27003 27004 ALUMINIUM POLISHED ALUMINIUM POLISHED STEEL GUNMETAL METALLIC METALCOTE X1 ........ X2 ........ X3 ........ X4 ........ X5 ........ X6 ........ X7 ........ X8 ........ X9 ........ X10 ........ 1322 1325 RED ORANGE GREEN CLEAR Colours are reproduced as accurately as print process will allow. 21 22 15 14 3 18 19 69 10 53 Tamiya Ref. No. Humbrol Ref. No. X11 ........ 11 X12 ........ 16 X13 ........ 52 X14 ........ 48 X15 ........ 38 X16 ........ 68 X17 ........ 200 X18 ........ 85 XF1 ........ 33 XF2 ........ 34 Tamiya Ref. No. Humbrol Ref. No. XF3 ........ 99 XF4 ........ 81 XF5 ........ 101 XF6 ........ 12 XF7 ........ 60 XF8 ........ 25 XF9 ........ 73 XF10........ 98 XF11........ 75 XF12........ 64 Tamiya Ref. No. Humbrol Ref. No. XF13 ........116 XF14 ........147 XF15 ........ 61 XF16 ........ 11 XF17 ........104 XF18 ........ 96 XF19 ........ 64 XF20 ........126 XF21 ........ 90 XF22 ........ 92 Tamiya Ref. No. Humbrol Ref. No. XF23 ........ 65 XF24 ........ 112 XF25 ........ 87 XF26 ........ 149 XF27 ........ 91 XF49 ........ 26 XF50 ........ 96 XF52 ........ 29 XF53 ........ 156 XF54 ........ 27 Tamiya Ref. No. Humbrol Ref. No. XF55 ........ 28 XF56 ........ 56 XF57 ........ 83 XF58 ........123 XF59 ........ 63 XF60 ........ 84 XF61 ........ 30 XF62 ........ 66 F.S. F.S. Ref. No. 1321 Humbrol Ref. No. 17038 17178 17875 27038 30117 30219 Humbrol Ref. No. .... .... .... .... .... .... 21 191 22 85 186 118 F.S. Ref. No. 30277 31136 33531 33538 33613 34079 Humbrol Ref. No. .... .... .... .... .... .... 187 153 121 154 148 116 F.S. Ref. No. 34087 34092 34097 34102 34127 34227 Humbrol Ref. No. .... .... .... .... .... .... 155 149 105 117 150 120 F.S. Ref. No. 35164 35237 35622 36081 36118 36173 Humbrol Ref. No. .... .... .... .... .... .... 144 145 122 32 125 156 F.S. Ref. No. 36231 36270 36320 36375 36440 36495 Humbrol Ref. No. .... .... .... .... .... .... 140 126 128 127 129 147 F.S. Ref. No. 36622 37038 37875 27875 30219 Humbrol Ref. No. .... .... .... .... .... 28 33 34 130 119 Cross references are given to identical or similar colours, however no guarantee of accuracy can be given.
