Contents Norgren Pneumatic Actuator Products

Transcription

APC-103
11/02
Supersedes 12/01
Norgren Pneumatic
Actuator Products
Contents
Pneumatic Actuator Products Overview . . . . . . . . . . . . . . .ACT-2
NFPA Aluminum & Steel Actuators . . . . . . . . . . . . . . . . .ACT-1-1
Series SS Stainless Steel Actuators . . . . . . . . . . . . . . . . .ACT-2-1
Series N Non-Rotating Actuators . . . . . . . . . . . . . . . . . . .ACT-3-1
Series 8000 & 8000/M ISO/VDMA Actuators . . . . . . . . . . .ACT-4-1
Tiny Tim Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-1
Roundline Stainless Steel Actuators . . . . . . . . . . . . . . . .ACT-6-1
Miniature Roundline Cylinders . . . . . . . . . . . . . . . . . . . . .ACT-7-1
Series 90000 Compact Actuators . . . . . . . . . . . . . . . . . . .ACT-8-1
Compact Interchangeable Actuators . . . . . . . . . . . . . . . .ACT-9-1
Lintra Series 46000 Rodless Actuators . . . . . . . . . . . . .ACT-10-1
Lintra-Lite Series A44000 Rodless Actuators . . . . . . . .ACT-11-1
Rack & Pinion Rotary Actuators . . . . . . . . . . . . . . . . . . .ACT-12-1
Miniature Rotary Actuators . . . . . . . . . . . . . . . . . . . . . . .ACT-13-1
Vane Rotary Actuators . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-14-1
Pneumatic Grippers . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-15-1
Fittings, Accessories, and Helpful
Engineering Information . . . . . . . . . . . . . . . . . . . . . .ACT-16-1
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1
Norgren Actuator Products
Norgren Pneumatic Actuators
Section 1 – NFPA Aluminum & Steel Actuators
Fluids: Filtered compressed air to 250 psi (17 bar)
Operating Pressure: 250 psi (17 bar)
Operating Temperature:
Series EA -20˚F to 200˚F (-29˚C to 107˚C)
with Viton Seals -20˚F to 400˚F (-29˚C to 204˚C)
Bore Sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6", 7", 8", 10”, 12”
Section 2 – Series SS Stainless Steel Actuators
Fluids: Filtered compressed air to 250 PSI
Petroleum based hydraulic fluid to 400 PSI
Lubrication: None required
Operating Pressure:
250 psig air(17.2 bar)
400 psig hydraulic (27.6 bar)
Operating Temperatures:
Series SS: -40° to 200°F (-40° to 93°C)
Series D: -20° to 250°F (-29° to 204°C)
with Viton Seals: -20° to 400°F (-29° to 204°C)
Bore Sizes: 1.125" (29mm), 1.50" (38mm), 2.0" (51mm), 2.50" (64mm), 3.25"
(83mm), 4.0" (102mm), 5.0" (127mm), 6.0" (152mm), 8.0" (203mm)
Section 3– Series N Non-Rotating Actuators
Fluids: Filtered compressed air to 250 psi
(For hydraulic service consult factory.)
Operating Pressure: 250 psig (17.2 bar)
Operating Temperatures: -20° to 200°F (-29° to 93°C)
Bore Sizes: 1.125" (29mm), 1.50" (38mm), 2.0" (51mm), 2.50" (64mm),
3.25" (83mm), 4.0" (102mm)
Section 4 – 8000 & 8000/M ISO VDMA Actuators
Fluids: Compressed air, filtered, lubricated and non-lubricated
Operating Pressure: 1 to 16 bar (14.5 to 232 psig)
Operating Temperature: -20° to 80°C max (-4° to 176°F max)
(Consult Technical Services for use below 2°C (35°F)
Bore Sizes: 32, 40, 50, 63, 80, 100, 125, 160, 200, 250, 320 mm
Note: Corrosion Resistant available.
Section 5 – Tiny Tim Actuators
-20° to 225°F (-30° to 110°C) with Standard Seals
-40° to 200°F (-40° to 90°C) with Buna N Seals
-40° to 350°F (-40° to 175°C) with Viton Seals
Bore Sizes: 3/4", 1", 1-1/8"
ACT-2
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Section 6 – Roundline Stainless Steel Body Actuators
Fluids: Filtered, lubricated or non-lubricated, compressed air
Maximum Operating Pressure: 250 psig (17.2 bar)
Temperature Range:
Standard Nitrile Seals: -20° to 200°F (-29° to 93°C)
Viton Seals: -20° to 400°F (-29° to 205°C)
Bore Sizes: .438" (11mm), .563" (14mm), .75" (19mm), 1.063" (27mm),
1.25" (32mm), 1.50" (40mm), 2.0" (50mm), 2.50" (63)
Section 7– Mini Roundline Pneumatic Cyinder
Fluids: Compressed air filtered, lubricated or non-lubricated
Operating Pressure: 50.75 to 101.5 psig (3.5 to 7 bar)
Operating Temperature: 32°F to 140°F (0°C to 60°C)
Bore Sizes: ø 2.5 mm & 4 mm
Section 8 – Series 90000 Compact Actuators
Fluids: Compressed air, filtered, lubricated or non-lubricated
Operating Pressure: 14.5 to 145 PSI (1 to 10 bar)
Operating Temperature: 23°* to 176°F (-5°* to 80 °C)
* Consult Technical Service for use below 35°F (2° C)
Bore Sizes: 0.50"(12mm), 0.625" (16mm), 0.75" (20mm), 1.0" (25mm),
1.25" (32mm), 1.50" (40mm), 2.0" (50mm) 2.50" (63mm),
3.125" (80mm), 4.0" (100mm)
Section 9 – Compact Interchangeable Pneumatic Actuator
Operating Pressure: 14.5 to 145 psig (1 to 10 bar)
Operating Temperature: -25°F to 250°F (-32°C to 121°C)
Bore Sizes: 0.5" (12mm), 0.63" (16mm), 0.79 (20mm), 0.98 (25mm), 1.26"
(32mm), 1.57" (40mm), 1.97" (50mm), 2.48” (63mm), 3.15”
(80mm), 3.94” (100mm), 4.92” (125mm), 5.51” (140mm),
6.3” (160mm).
Section 10 – Lintra Series 46000 Rodless Actuators
Fluids: Compressed air filtered to 50µ and lubricated
Operating Pressure
16 mm: 22 to 150 psig (1.5 to 10 bar)
20 mm to 80 mm: 15 to 150 psig (1 to 10 bar)
Operating Temperatures
-22° to 180°F* (-30°C to 80°C)
*With dewpoint of supply air less than ambient air temperature.
Bore Sizes: 0.63" (16mm), 0.79 (20mm), 0.98 (25mm), 1.26" (32mm),
1.57" (40mm), 1.97" (50mm),2.48" (63mm), 3.15" (80mm)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-3
Section 11 – Lintra-Lite Series A440000 Rodless Actuators
Fluids: Compressed air, filtered to 50µ and lubricated
Operating Pressure: 15 to 118 psig ( 1 to 8 bar)
Operating Temperatures: -22° to 180°F* (-30° to 80°C)
*With dewpoint of supply air less than ambient air temperature at cylinder,
consult our Technical Service for use below 36°F (2°C)
Bore Sizes: 1.0" (25mm), 1.25" (32mm), 1.50" (40mm)
Section 12 – Rack and Pinion Rotary Actuators
-20° to 200°F (-29° to 93°C) with Standard Nitrile Seals
-20° to 400°F (-29° to 204°C) with Viton® Seals
-20° to 250°F (-29° to 121°C) with Low Friction Seals
Bore Sizes: 0.50" (12mm), 0.75" (20mm), 1.125" (29mm), 1.50" (38mm), 2.00"
(50mm), 2.50" (64mm)
Section 13 – Mini Pneumatic Rotary Actuators
Operating Pressure: 14.5 to 101.5 psig ( 1 to 7 bar)
Operating Temperatures: 32°F to 140°F* (5°C to 60°C)
*With dewpoint of supply air less than ambient air temperature at cylinder,
consult our Technical Service for use below 36°F (2°C)
Size Range: ø 0.47" to 0.87" (12 mm to 22 mm)
Section 14 – Rotary Vane Actuators
Fluids: Lubricated or non-lubricated, filtered, compressed air
Operating Pressure:
M/60280, M/60281: 44 to 102 psig (3 to 7 bar)
M/60282, C/60283: 29 to 102 psig (2 to 7 bar)
C/60284, C/60084/TI: 29 to 145 psig (2 to 10 bar)
Operating Temperature: 40° to 140°F (5° to 60°C)
Section 15 – Pneumatic Grippers
Operating Pressure
29 to 101.5 psig (2 to 7 bar) - See individual components for pressures
Operating Temperatures
32°F to 140°F* (0°C to 60°C)
ACT-4
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Section 1
NFPA Aluminum & Steel Cylinders
Page ACT-1-18
Cylinder with
01 (MS4)
Side Tapped
Page ACT-1-22
Cylinder with
03 (MF1) Head
Rectangular Flange
Page ACT-1-24
Cylinder with
03 (ME3) Head
Square Flange
Page ACT-1-24
Cylinder with
04 (ME4) Cap
Square Flange
Page ACT-1-26
Cylinder with
04 (MF2) Cap
Rectangular Flange
Page ACT-1-28
Cylinder with
05 (MX0) Basic
Page ACT-1-32
Cylinder with
06 (MX1) Tie Rod-4,
6C (MX2) Cap, 6R (MX3)
Head, 6B (MX4) Tie Rod-2
Page ACT-1-36
Cylinder with
07 (MT1)
Head Trunnion
Page ACT-1-40
Cylinder with
08 (MT2)
Cap Trunnion
Page ACT-1-44
Cylinder with
09 (MS2)
Side Lugs
Page ACT-1-48
Cylinder with
10 (MT4) Intermediate
Center Trunnion
Page ACT-1-52
Cylinder with
11 (MS1)
Side End Angles
Page ACT-1-56
Cylinder with
12 (MP1) Cap
Fixed Clevis
Page ACT-1-60
Cylinder with
15 (MS7)
Side End Lugs
Page ACT-1-62
Cylinder with 16
Sleeve Nut Construction
Side Tapped (Universal)
Page ACT-1-64
Cylinder with
20 (MF5) Head
Square Flange
Page ACT-1-66
Cylinder with
21 (MF6) Cap
Square Flange
Page ACT-1-68
Cylinder with
22 (MP2) Detachable
Clevis
Page ACT-1-70
Cylinder with
32 (MP3) Cap
Fixed Eye
Page ACT-1-74
Cylinder with
42 (MP4) Detachable
Cap Eye
Page ACT-1-76
Cylinder with
52 Spherical Bearing
Series “A” Aluminum (1-1/2" to 8") &
Series “J” Steel (1-1/2"to 12") Bore Cylinder Features
Series “A” and “J” Technical Features . . . . . . . . . . . . . . . . ACT-1-2, ACT-1-6
Series “EA” Aluminum (1-1/2" to 8") &
Series “EJ” Steel (1-1/2"to 12") Bore Cylinder Features
Series “EA” and “EJ” Impact Dampening Seals . . . . ACT-1-4, ACT-1-8, ACT-1-12
Series “EA” and “EJ” Technical Features . . . . . . . . . . . . . . ACT-1-5, ACT-1-9
Decel Cushioned Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACT-1-10
General Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACT-1-13
Code
01
03
03
04
04
05
06
6C
6R
6B
7R
07
8R
08
09
10
11
12
15
16
20
21
22
32
42
52
60
NFPA
MS4
MF1
ME3
ME4
MF2
MX0
MX1
MX2
MX3
MX4
MT1
MT1
MT2
MT2
MS2
MT4
MS1
MP1
MS7
N/A
MF5
MF6
MP2
MP3
MP4
N/A
N/A
Bore Sizes
1-1/2" – 12"
1-1/2" – 6"
7" – 12"
7" – 12"
1-1/2" – 6"
1-1/2" – 12"
1-1/2" – 12"
1-1/2" – 12"
1-1/2" – 12"
1-1/2" – 12"
1-1/2" – 8"
1-1/2" – 12
1-1/2" – 8"
1-1/2" – 12
1-1/2" – 12"
1-1/2" – 12"
1-1/2" – 12"
1-1/2" – 12"
1-1/2" – 8"
1-1/2" – 6"
1-1/2" – 6"
1-1/2" – 6"
1-1/2" – 8"
1-1/2" – 12"
1-1/2" – 8"
1-1/2" – 8"
1-1/2" – 6"
Description
Side Tapped . . . . . . . . . . . . . . . . . . . . . ACT-1-18
Head Rectangular Flange . . . . . . . . . . . . ACT-1-22
Head Square Flange . . . . . . . . . . . . . . . . ACT-1-24
Cap Square Flange . . . . . . . . . . . . . . . . ACT-1-24
Cap Rectangular Flange . . . . . . . . . . . . . ACT-1-26
Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . ACT-1-28
4 Tie Rods Both Ends . . . . . . . . . . . . . . ACT-1-32
Cap Tie Rods . . . . . . . . . . . . . . . . . . . . . ACT-1-32
Head Tie Rods . . . . . . . . . . . . . . . . . . . . ACT-1-32
2 Tie Rods Both Ends . . . . . . . . . . . . . . ACT-1-32
Removable Head Trunnion (A & EA Only) . . . . ACT-1-36
Head Trunnion (J & EJ Only) . . . . . . . . . . . ACT-1-36
Removable Cap Trunnion . . . . . . . . . . . . ACT-1-40
Cap Trunnion . . . . . . . . . . . . . . . . . . . . . ACT-1-40
Side Lugs . . . . . . . . . . . . . . . . . . . . . . . ACT-1-44
Intermediate Center Trunnion . . . . . . . . . ACT-1-48
Side End Angles . . . . . . . . . . . . . . . . . . . ACT-1-52
Cap Fixed Clevis . . . . . . . . . . . . . . . . . . ACT-1-56
Side End Lugs . . . . . . . . . . . . . . . . . . . . ACT-1-60
Sleeve Nut Construction Universal . . . . . . ACT-1-62
Head Square Flange . . . . . . . . . . . . . . . . ACT-1-64
Cap Square Flange . . . . . . . . . . . . . . . . ACT-1-66
Detachable Cap Clevis . . . . . . . . . . . . . . ACT-1-68
Cap Fixed Eye . . . . . . . . . . . . . . . . . . . . ACT-1-70
Detachable Cap Eye . . . . . . . . . . . . . . . . ACT-1-74
Spherical Bearing . . . . . . . . . . . . . . . . . . ACT-1-76
Base Bar (A & EA) . . . . . . . . . . . . . . . . . ACT-1-78
Series DA & EDA (Aluminum) and
DJ & EDJ (Steel) Double Rod End Cylinders . . . . . . . . . . . . . . . . . . . ACT-1-80
Series A & EA (1-1/2" to 8") and
Series J & EJ (1-1/2" to12") Cylinder Accessories . . . . . . . . . . . . . . . ACT-1-84
Series A & EA and J & EJ Optional Features & Custom Cylinders . . . . ACT-1-86
Stroke Signal Valve/Pneulectric Valve . . . . . . . . . . . . . . . . . . . . . . . . . ACT-1-88
Reed & Solid State Switch Information . . . . . . . . . . . . . . . . . . . . . . . . ACT-1-90
Flow Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACT-1-92
Rod Alignment Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACT-1-94
Air-Oil Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACT-1-94
Series A & EA and J & EJ Standard and Special Options . . . . . . . . . . ACT-1-95
Series A & EA (1-1/2" - 8") and Series J & EJ (1-1/2" - 12")
Order Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACT-1-96
Seal Replacement Kits for Series A, EA, J & EJ . . . . . . . . . . . . . . . . . ACT-1-97
NFPA - National Fluid Power Association
Page ACT-1-80
Page ACT-1-78
Cylinder with 60 Base Bar Double Rod End Cylinders
(A & EA Only)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-1
Series A, NFPA Aluminum Air Cylinders (ø1-1/2" to 8"), Cylinder Features
Series A Cylinders are constructed with the finest materials for each component!
1 Piston Rod: Hard chrome plated
high-tensile steel, ground and polished.
2 Rod Bearing: External removable
threaded steel bearing housing (black
oxide finish), with an oil-impregnated
sintered iron rod bearing.
3 Rod Seal: Nitrile lip-type seal
is pressure energized and wear
compensating for durability and long life.
4 Head/Cap: Precision machined from
alloy aluminum, then anodized for
corrosion resistance (black finish).
5 Ultra Cushion® Seals: Advanced
design features a unique, one-piece,
compound seal of nitrile* captured within
a precision machined groove. Linear and
radial “float” of the cushion seals
eliminates misalignment. Ultra Cushions
provide exceptionally fast “out of
cushion” stroke reversal. (Head and Cap
Cushions are optional.)
7 Tie Rods: High-strength steel maintains
uniform compression on tube end seals.
8 Piston: Machined solid aluminum
alloy, light-weight for low inertia, yet
strong. Threaded piston is installed with
high strength threadlocker adhesive then
staked to the piston rod.
*Nitrile seals on the 5/8" & 1" rod diameter.
For rod sizes 1-3/8" and larger, urethane seals are standard.
9 Adjustable Captive Cushion
Needle: A one-piece, precision threaded
6 O-Ring Tube Seal: Buna is
standard. (Viton is optional.)
brass cushion adjustment screw with a
threaded steel capture ring. It provides
safe and precise cushion adjustment.
6
8
7
9
5
4
3
6
1
2
11
9
10 Wiper Seal: Lip-type urethane
wiper seal keeps contaminates
from getting into cylinder by
aggressively wiping foreign materials
from the piston rod, enhancing the
rod seal life.
Application Information
Series A NFPA interchangeable aluminum air
cylinders are offered with a variety of accessories,
standard and optional equipment to meet your
application needs.
ACT-1-2
12
12
10
11 Cylinder Tube: High-strength
aluminum alloy ideally suited for air
service. The tube is clear anodized on the
O.D. and hard anodic coated on the I.D.,
resulting in a smooth, file hard (60RC),
corrosion and score resistant
surface finish.
The addition of a Teflon® wear ring to the
outer perimeter of the piston permits us to
guarantee its operation against failure due
to lack of lubrication for ONE FULL YEAR,
regardless of cycles! See page ACT-1-98 for
complete warranty.
Brookville, OH USA
Phone 937-833-4033
4
13
12 Piston Seals: Long-wearing
nitrile seals.
13 Wear Ring: Reinforced Teflon®
compounded with polyphenylene sulfide
provides supreme wear and excellent
bearing support.
Standard non-cushioned Series A cylinders are
recommended for applications that require full
bottoming of the piston and where the noise
emitted by the metal-to-metal impact between the
piston and cylinder end caps is tolerable. We
recommend that optional non-adjustable cushions
be added for piston speeds (moving light tools)
ranging from 15 to 30 in/sec. For speeds exceeding
30 in/sec, the cylinders should be equipped with
adjustable air cushions.
www.norgren.com
Series EA, NFPA Aluminum Air Cylinders (ø1-1/2" to 8"), Cylinder Features
Series EA Ecology Cylinders are constructed with the finest
materials for each component!
provide exceptionally fast “out of cushion”
stroke reversal. (Head and Cap Cushions
are optional.)
3 Piston: Machined solid aluminum
alloy, light-weight for low inertia, yet
strong. Threaded piston is installed with
4 O-Ring Tube Seal: Buna is standard.
(Viton is optional.)
1
2
5 Adjustable Captive Cushion Needle
(not shown): Fine thread allows
for safe and precision adjustment of
cushion. (See page 2.)
2 Impact Dampening Piston Seals:
Our impact dampening piston seals, in
conjunction with our advanced cushion
design, decelerate and reduce
end-of-stroke noise.
2
6 Wiper Seal: Lip-type urethane wiper
seal keeps contaminates from getting
into cylinder by aggressively wiping
foreign materials from the piston rod,
enhancing the rod seal life.
3
4
6
7
9
8
4
10
12
11
1
alloy aluminum, then anodized for
corrosion resistance (black finish).
bearing support.
10 Tie Rods: High-strength steel
maintains uniform compression on
tube end seals.
aluminum alloy ideally suited for air
service. The tube is clear anodized on the
O.D. and hard anodic coated on the I.D.,
resulting in a smooth, file hard (60RC),
corrosion and score resistant surface
finish.
Brookville, OH USA
Phone 937-833-4033
13
8
12 Rod Seal: Nitrile lip-type seal is
pressure energized and wear
compensating for durability
and long life.
steel bearing housing (black oxide
finish), with an oil-impregnated
www.norgren.com
ACT-1-3
Series A & EA, NFPA Aluminum Air Cylinders, Impact Dampening Seals
Norgren Ecology Cylinders offer these advantages:
1
Norgren Guarantees
Non-lubricated Operation
for a Full Year!
The piston rod is self-lubricated by the
oil-impregnated rod bearing during operation.
Lubrication between piston and cylinder barrel
is derived from the polishing qualities of the
reinforced Teflon® wear ring.
Series EA cylinders provide substantial reductions
in impact noise, which reduces overall machine
noise and helps meet government regulations.
PSI Air Sound
Pressure
Level+
95
PSI+
Series EA cylinders are NFPA interchangeable
and are available in many different mounting styles.
3
The impact-dampening
Piston Seals in the Series EA cylinder
allow for guaranteed, repeatable cushioning.
The compressive qualities of the piston seals are
predictable. The degree of seal compression at
various supply pressures is documented. (See
Energy Absorption Chart.) This allows you to
compute the exact cylinder size required by
knowing the weight (pounds) you are stopping
at a given speed.
Series EA cylinders have a impact dampening
piston seal that accomplishes 80% of the actual
load stopping. The air cushion accounts for only
20%. (A conventional air cushioning cylinder
depends 100% on the compressibility of air to do
the stopping.) The EA seal absorbs high impact
loads allowing the effect of the air cushion to be
reduced by using a larger air cushion bleed
orifice. As a result the piston can move at a faster
speed for a longer period of time before the EA
seal does the final stopping.
See illustration at top of ACT-1-5 for cushion
operation.
The impact dampening qualities of the
Piston Seals are guaranteed for ONE FULL YEAR!
Summary of Sound Levels in Decibels
The low friction surfaces extend the life of the
seals beyond normal expectations, permitting
Norgren to unconditionally guarantee nonlubricated
operation for one full year. See page ACT-1-98 for
complete warranty.
Energy Absorption
Capacity of the Impact
Dampening Seals
2
The summary of sound decibels chart illustrates the
operating sound levels.
Operates Quietly
to Meet
OSHA Specifications.
50
PSI+
A133B3
5" x 6"
+ Peak sound pressure is given in decibels (dB)
Cylinder Model
re:2 x 10 5 N/m2.
EA155B3 A1133A3 EA1155A3
++End position of mike was 3' on centerline from end of
5" x 6"
2" x 6"
2" x 6"
cylinder; side position of mike was 3' perpendicular to
73
110
74
centerline abeam of end of cylinder.
End++
108
Side++
112
84
110
81
End++
108
73
113
74
Side++
113
85
110
81
Note: At 5 feet, cylinder sound levels would be less by 9 dB
from side figure and 13 dB from end figure. The total noise
emitted will depend on the structure to which the cylinder is
attached. If it is mounted on a thin flat plate of considerable
area, the noise will be increased by a sounding board effect.
Energy Absorption Capacity of the Impact Dampening Seals
*Usable Pounds Stoppable at the Following Piston Speeds
This chart features the energy absorption capacity of the impact dampening piston seals
with Non-Adjustable cushions. For higher loads and velocities please refer to the Decel-Air™ Cushion
Option on ACT-1-10.
In/Sec
6
12
18
24
30
36
42
48
54
60
11/2
155.6
38.4
16.7
9.2
5.6
3.7
2.6
1.8
1.3
1.0
2
275.5
68.1
29.7
16.3
10.0
6.7
4.6
3.2
2.4
1.8
21/2
499.8
123.4
53.7
29.4
18.1
11.9
8.2
5.8
4.2
3.0
31/4
969.3
239.7
104.6
57.3
35.4
23.5
16.3
11.7
8.5
6.2
Cylinder Bore
4
5
1505.4
2603.2
372.6
644.8
162.8
282.1
89.4
155.2
55.4
96.4
37.0
64.5
25.8
45.3
18.6
32.8
13.6
24.2
10.1
18.1
6
4159.8
1030.2
450.6
247.8
153.9
102.9
72.2
52.2
38.5
28.7
7
5794.2
1435.8
628.7
346.2
215.4
144.4
101.6
73.8
54.7
41.1
8
8067.6
2000.4
876.8
483.6
301.6
202.7
143.1
104.4
77.9
58.9
7
10,429
2,583
1,130
622
387
259
181
131
97
74
8
4,520
3,800
1,576
869
541
363
257
187
138
106
*The weight of the cylinder piston has been deducted from the figures shown above.
Note: The use of Viton® Seals limits the absorption of the impact dampening seals by 50%.
Energy absorption capacity of the impact dampening
piston seals with an adjustable cushion.
In/Sec
6
12
18
24
30
36
42
48
54
60
11/2
279
68
30
16
10
6.7
4.7
3.4
2.3
1.8
2
495
122
53
29
18
12
8.3
5.7
4.3
3.2
21/2
899
221
95
52
32
21.6
14.7
10.4
7.6
5.4
31/4
1,744
430
187
102
63
42
29
21
15.3
11
Cylinder Bore
4
2,709
699
291
160
99
66
46
33
24
18
5
4,685
1,159
507
279
172
116
81
59
43
33
6
7,486
1,854
810
444
275
183
129
93
68
52
Effect of Impact Dampening Seals on Total Stroke of Cylinders
PSI
0
20
40
60
80
100
11/2
.14
.10
.07
.04
.02
0
2
.15
.10
.07
.04
.02
0
21/2
.17
.12
.08
.05
.02
0
31/4
.19
.14
.09
.05
.02
0
Cylinder Bore
4
.22
.16
.10
.06
.03
0
5
.25
.18
.12
.07
.03
0
6
.28
.20
.13
.07
.03
0
7
.32
.22
.14
.08
.04
0
Note: These figures are for new cylinders. The impact dampening seals will take some compression set during operation
of the cylinder and the stroke loss will decrease. Also, the pressure at zero stroke loss will decrease to about 80 psi.
At pressures above those of zero stroke loss, a slight clicking sound may be produced during impact.
To determine the stroke loss for either the head or cap end, divide the value shown by 2.
ACT-1-4
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
8
.32
.22
.14
.08
.04
0
Series A & EA, NFPA Aluminum Air Cylinders (ø1-1/2" to 8"), Technical Features
Cushion Function
As the cushion spear enters the cushion cavity, the
exhaust port becomes sealed off creating an air brake. This
provides the initial deceleration in piston speed. The
oversized air cushion bleed orifice permits the cushion
pressure to exhaust with minimal restriction. This allows
the piston to move quickly and smoothly through the
cushion length.
As the piston continues its travel to the point of impact
with the end caps, the compressive qualities of the EJ seal
provide the final decelerating force. This action compresses
the EJ seal and absorbs the remaining kinetic shock
vibration and noise created by the impact.
On the reverse stroke the EJ seal releases its compressive
energy to propel the piston away from the end caps,
producing an immediate breakaway.
Lubrication:
Side Loading:
Series EA
None required
Norgren Air Cylinders are rated for “no lube
added” service. All internal components are
lubricated at time of assembly with a Teflon®
based grease.
Cylinders are specifically designed to push and
pull. Side loading(misalignment)
of the piston rod should be avoided to ensure
maximum operating performance and life.
with Viton Seals
-20˚F to 200˚F
(-29˚C to 107˚C)
-20˚F to 400˚F
(-29˚C to 204˚C)
Operating Pressure:
Materials:
250 PSIG Air (17 Bar)
EA Cylinders cannot be used
in hydraulic applications.
Bore Sizes: 1-1/2", 2", 2-1/2", 3-1/4",
4", 5", 6", 7", 8"
Head and End Caps: black anodized
6061-T6 aluminum
Tube: 6063-T832 aluminum, clear
anodized O.D., hardcoat anodized I.D.
Rod: hard chrome plated steel
Piston: machined high-strength
aluminum alloy
Rod Bearing: oil impregnated sintered iron
Seals: nitrile rod seal, urethane rod wiper,
nitrile piston seals, nitrile tube end seals
Tie Rods: high-tensile strength steel
Supply:
Filtered compressed air to 250 PSI
Air Cylinder Selection:
The proper application and selection of an air
cylinder requires full consideration of the
following: the fluid medium, operating
pressures, mounting style, length of stroke,
type of rod connection to the load, thrust or
mounting tension on the rod, mounting
attitude, speed of the stroke and how the load
motion will be stopped.
The data that follows provides the necessary
information in the evaluation of
an average application and will help you in
selecting the proper cylinder model and size
for your particular application.
Note: 1-1/2", 2", 2-1/2", 3-1/4", 4" and 5" bore
cylinders with 1/2" to 2" strokes will be
furnished with a short head cushion sleeve
and short cap cushion spear.
Only available on 5/8" and 1" rods.
Care should be taken during installation
to properly align the load to be moved with the
center line of the cylinder.
The use of a rod alignment coupler (see
page ACT-1-94) is strongly recommended
whenever possible.
Series EA Fixed Cushions
Piston and rod assembly
for 1-1/2" thru 5"
bore cylinders with
less than 1/2" stroke,
and 6" thru 8"
bore cylinders
with less than 2" stroke.
Piston and rod
assembly for
1-1/2" thru 5"
bore cylinders
with 1/2" to 2" stroke.
The above specification applies to Series EA
cylinders with standard non-adjustable or
optional adjustable cushions.
Ultra Cushion®
A Major Design and Performance Breakthrough in Air Cylinder Cushioning Systems!
Norgren’s advanced cushion design features a unique, onepiece, nitrile compound seal that is captured within a
precision machined groove. This allows both linear
and radial “float” of the cushion seal which
virtually eliminates problems associated
with misalignment. Integral flow paths
molded in the periphery of the seal provide
exceptionally fast “out of cushion” stroke
reversal without the use of ball checks.
Figure 1
Brookville, OH USA
Figure 2 shows spear
exiting cushion seal.
Phone 937-833-4033
www.norgren.com
ACT-1-5
Series J, NFPA Steel Air Cylinders (ø1-1/2" to 12"), Cylinder Features
Series J Cylinders are constructed with the finest materials for each component!
threaded steel bearing housing (black
oxide finish), with an oil-impregnated
3 Rod Seal: Nitrile lip-type seal
is pressure energized and wear
steel, then black oxide finished 1-1/2" to
2-1/2" bores. Painted black finish on
3-1/4" to 12" bores.
provide exceptionally fast “out of
cushion” stroke reversal. (Head and Cap
Cushions are optional.)
tube end seals.
Needle: A one-piece, precision threaded
brass cushion adjustment screw with a
threaded steel capture ring. It provides
safe and precise cushion adjustment.
8 Piston: Machined solid steel,
for high strength. Threaded piston is
installed with high strength threadlocker
adhesive then staked to the piston rod.
6 O-Ring Tube Seal: Buna is
standard. (Viton is optional.)
6
7
9
8
5
4
3
6
1
2
10
11
Application Information
Series J NFPA interchangeable steel air cylinders
are offered with a variety of accessories, standard
and optional equipment to meet your application
needs.
ACT-1-6
12
4
12 Piston Seals: Long-wearing
nitrile seals.
9
10 Wiper Seal: Lip-type urethane
wiper seal keeps contaminates
from getting into cylinder by
aggressively wiping foreign materials
from the piston rod, enhancing the
rod seal life.
12 13
aluminum alloy 1-1/2", 2", 2-1/2" bore
anodized on the O.D. and hard coat I.D.
Steel cylinder tube hard chrome plated
I.D. 3-1/4" to 12" bore.
bearing support.
The addition of a Teflon® wear ring to the outer
perimeter of the piston permits us to guarantee its
operation against failure due to lack of lubrication
for ONE FULL YEAR, regardless of cycles! See page
ACT-1-98 for complete warranty.
Standard non-cushioned Series J cylinders are
recommended for applications that require full
bottoming of the piston and where the noise emitted
by the metal-to-metal impact between the piston and
cylinder end caps is tolerable. We recommend that
optional non-adjustable cushions be added for
piston speeds (moving light tools) ranging from 15
to 30 in/sec. For speeds exceeding 30 in/sec, the
cylinders should be equipped with adjustable air
cushions.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series J, NFPA Steel Air Cylinders (ø1-1/2" to 12"), Cylinder Features
Series EJ Ecology Cylinders are constructed with the finest
materials for each component!
compound seal of nitrile* captured
within a precision machined groove.
Linear and radial “float” of the cushion
seals eliminates misalignment. Ultra
Cushions provide exceptionally fast “out
of cushion” stroke reversal. (Head and
Cap Cushions are optional.)
4 O-Ring Tube Seal: Buna is standard.
(Viton is optional.)
2 Impact Dampening Piston Seals:
Our impact dampening piston seals, in
conjunction with our advanced cushion
design, decelerate and reduce
end-of-stroke noise.
3 Piston: Machined solid steel, for high
strength. Threaded piston is installed with
1
(not shown): Fine thread allows
for safe and precision adjustment of
cushion. (See page ACT-1-6.)
6 Wiper Seal: Lip-type urethane wiper
seal keeps contaminates from getting
into cylinder by aggressively wiping
foreign materials from the piston rod,
enhancing the rod seal life.
2
2
3
4
6
7
9
8
4
10
12
11
steel, then black oxide finished 1-1/2" to
2-1/2" bores. Painted black finish 3-1/4"
to 12" bores.
bearing support.
1
13
8
tube end seals.
12 Rod Seal: Nitrile lip-type seal is
pressure energized and wear
aluminum alloy 1-1/2", 2". 2-1/2" bore
anodized on the O.D. and hard coat I.D.
Steel cylinder tube hard chrome plated
I.D. 3-1/4" to 12" bore.
Rod Bearing: External removable
13 steel bearing housing (black oxide
finish), with an oil-impregnated sintered
iron rod bearing.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-7
Series J & EJ, NFPA Steel Air Cylinders, Impact Dampening Seals
Norgren Ecology Cylinders offer these advantages:
1
Norgren Guarantees
Non-lubricated Operation
for a Full Year!
The piston rod is self-lubricated by the
oil-impregnated rod bearing during operation.
Lubrication between piston and cylinder barrel
is derived from the polishing qualities of the
reinforced Teflon® wear ring.
The low friction surfaces extend the life of the
seals beyond normal expectations, permitting
Norgren to unconditionally guarantee nonlubricated operation for one full year.
See page ACT-1-98 for complete warranty.
Series EJ cylinders are NFPA interchangeable
and are available in many different mounting styles.
3
Energy Absorption
Capacity of the Impact
Dampening Seals
The impact-dampening
Piston Seals in the Series EJ cylinder
allow for guaranteed, repeatable cushioning.
The compressive qualities of the piston seals are
predictable. The degree of seal compression at
various supply pressures is documented. (See
Energy Absorption Chart.) This allows you to
compute the exact cylinder size required by
knowing the weight (pounds) you are stopping
at a given speed.
Series EJ cylinders have a impact dampening
piston seal that accomplishes 80% of the actual
load stopping. The air cushion accounts for only
20%. (A conventional air cushioning cylinder
depends 100% on the compressibility
of air to do the stopping.) The EJ seal absorbs
high impact loads allowing the effect of the air
cushion
to be reduced by using a larger air cushion bleed
orifice. As a result the piston can move at a faster
speed for a longer period of time before the EJ
seal does the final stopping. See illustration at top
of ACT-1-9 for cushion operation.
2
The summary of sound decibels chart illustrates the
operating sound levels.
Operates Quietly
to Meet
OSHA Specifications.
Series EJ cylinders provide substantial reductions in
impact noise, which reduces overall machine noise
and helps meet government regulations.
The impact dampening qualities of the
Piston Seals are guaranteed for ONE FULL YEAR!
Summary of Sound Levels in Decibels
PSI Air Sound
Pressure
Level+
95
PSI+
50
PSI+
J133B3
5" x 6"
Cylinder Model
EJ155B3 J1133A3 EJ1155A3
5" x 6"
2" x 6"
2" x 6"
End++
108
73
110
74
Side++
112
84
110
81
End++
108
73
113
74
Side++
113
85
110
81
+ Peak sound pressure is given in decibels (dB)
re:2 x 10 5 N/m2.
++End position of mike was 3' on centerline from end of
cylinder; side position of mike was 3' perpendicular to
centerline abeam of end of cylinder.
Note: At 5 feet, cylinder sound levels would be less by 9 dB
from side figure and 13 dB from end figure. The total noise
emitted will depend on the structure to which the cylinder is
attached. If it is mounted on a thin flat plate of considerable
area, the noise will be increased by a sounding board effect.
Energy Absorption Capacity of the Impact Dampening Seals
*Usable Pounds Stoppable at the Following Piston Speeds
This chart features the energy absorption capacity of the impact dampening piston seals
with a Non-Adjustable cushions. For higher loads and velocities please refer to the Decel- Air
Cushion option on ACT-1-10.
In/Sec
6
12
18
24
30
36
42
48
54
60
11/2
155.6
38.4
16.7
9.2
5.6
3.7
2.6
1.8
1.3
1.0
21/2
499.8
123.4
53.7
29.4
18.1
11.9
8.2
5.8
4.2
3.0
2
275.5
68.1
29.7
16.3
10.0
6.7
4.6
3.2
2.4
1.8
31/4
969.3
239.7
104.6
57.3
35.4
23.5
16.3
11.7
8.5
6.2
4
1505.4
372.6
162.8
89.4
55.4
37.0
25.8
18.6
13.6
10.1
Cylinder Bore
5
6
2603.2
4159.8
644.8
1030.2
282.1
450.6
155.2
247.8
96.4
153.9
64.5
102.9
45.3
72.2
32.8
52.2
24.2
38.5
18.1
28.7
7
5794.2
1435.8
628.7
346.2
215.4
144.4
101.6
73.8
54.7
41.1
8
8067.6
2000.4
876.8
483.6
301.6
202.7
143.1
104.4
77.9
58.9
10
12,242
3026
1319.3
722
445.5
295.3
204.8
146
105.7
76.9
12
20,139
4971
2162.1
1179
724
476.8
327.7
231
164.7
117.2
*The weight of the cylinder piston has been deducted from the figures shown above.
Note: The use of Viton® Seals limits the absorption of the impact dampening seals by 50%.
Energy absorption capacity of the impact dampening
piston seals with an adjustable cushion.
In/Sec
11/2
279
68
30
16
10
6.7
4.7
3.4
2.3
1.8
6
12
18
24
30
36
42
48
54
60
21/2
899
221
95
52
32
21.6
14.7
10.4
7.6
5.4
2
495
122
53
29
18
12
8.3
5.7
4.3
3.2
31/4
1,744
430
187
102
63
42
29
21
15.3
11
Cylinder Bore
4
5
2,709
4,685
699
1,159
291
507
160
279
99
172
66
116
46
81
33
59
24
43
18
33
6
7,486
1,854
810
444
275
183
129
93
68
52
7
10,429
2,583
1,130
622
387
259
181
131
97
74
8
4,520
3,800
1,576
869
541
363
257
187
138
106
10
22,035
5,446
2,374
1,299
801
531
367
262
189
138
12
36,250
8,947
3,891
1,414
1,303
856
588
415
295
211
PSI
0
20
40
60
80
100
11/2
.14
.10
.07
.04
.02
0
2
.15
.10
.07
.04
.02
0
21/2
.17
.12
.08
.05
.02
0
31/4
.19
.14
.09
.05
.02
0
4
.22
.16
.10
.06
.03
0
Cylinder Bore
5
.25
.18
.12
.07
.03
0
6
.28
.20
.13
.07
.03
0
7
.32
.22
.14
.08
.04
0
8
.32
.22
.14
.08
.04
0
10
.36
.24
.15
.09
.04
0
Note: These figures are for new cylinders. The impact dampening seals will take some compression set during operation
of the cylinder and the stroke loss will decrease. Also, the pressure at zero stroke loss will decrease to about 80 psi.
At pressures above those of zero stroke loss, a slight clicking sound may be produced during impact.
To determine the stroke loss for either the head or cap end, divide the value shown by 2.
ACT-1-8
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
12
.40
.26
.16
.10
.04
0
Series J & EJ, NFPA Steel Air Cylinders (ø1-1/2" to 12"), Technical Features
Cushion Function
As the cushion spear enters the cushion cavity, the
exhaust port becomes sealed off creating an air brake. This
provides the initial deceleration in piston speed. The
oversized air cushion bleed orifice permits the cushion
pressure to exhaust with minimal restriction. This allows
the piston to move quickly and smoothly through the
cushion length.
As the piston continues its travel to the point of impact
with the end caps, the compressive qualities of the EJ seal
provide the final decelerating force. This action compresses
the EJ seal and absorbs the remaining kinetic shock
vibration and noise created by the impact.
On the reverse stroke the EJ seal releases its compressive
energy to propel the piston away from the end caps,
producing an immediate breakaway.
Lubrication:
Side Loading:
Series J
None required
Norgren Air Cylinders are rated for “no lube
added” service. All internal components are
lubricated at time of assembly with a Teflon®
based grease.
Cylinders are specifically designed to push and
pull. Side loading (misalignment)
of the piston rod should be avoided to ensure
maximum operating performance and life.
with Viton Seals
-20°F to 200°F
(-29°C to 107°C)
-20˚F to 400˚F
(-29˚C to 204˚C)
Operating Pressure:
Materials:
250 PSIG Air (17.2 Bar)
400 PSIG Hydraulic (27.6 Bar)
Bore Sizes: 1-1/2", 2", 2-1/2", 3-1/4",
4", 5", 6", 7", 8", 10", 12"
Supply:
Filtered compressed air to 250 PSI Petroleum
based hydraulic fluid to 400 PSI
Air Cylinder Selection:
The proper application and selection of an air
cylinder requires full consideration of the
following: the fluid medium, operating
pressures, mounting style, length of stroke,
type of rod connection to the load, thrust or
mounting tension on the rod, mounting
attitude, speed of the stroke and how the load
motion will be stopped.
The data that follows provides the necessary
information in the evaluation of
Head and End Caps: precision
machined steel
anodized O.D., hard coat anodized I.D.
Rod: hard chrome plated steel
Piston: machined high-strength
aluminum alloy
Rod Bearing: oil impregnated sintered iron
Seals: nitrile rod seal, urethane rod wiper,
nitrile piston seals, nitrile tube
end seals
Tie Rods: high-tensile strength steel
an average application and will help you in
selecting the proper cylinder model and size
for your particular application.
Care should be taken during installation
to properly align the load to be moved with the
center line of the cylinder.
The use of a rod alignment coupler (see page
ACT-1-94 is strongly recommended whenever
possible.
Series J Fixed Cushions
Piston and rod
assembly for
1-1/2" thru 5"
bore cylinders
with 1/2" to 2" stroke.
Note: 1-1/2", 2", 2-1/2", 3-1/4", 4" and 5" bore
cylinders with 1/2" to 2" strokes will be
furnished with a short head cushion sleeve
and short cap cushion spear.
Only available on 5/8" and 1" rods.
The above specification applies to Series J
cylinders with optional non-adjustable or
adjustable cushions.
Ultra Cushion®
Norgren’s advanced cushion design features a unique, onepiece, nitrile compound seal that is captured within a
precision machined groove. This allows both linear
and radial “float” of the cushion seal which
virtually eliminates problems associated
with misalignment. Integral flow paths
molded in the periphery of the seal provide
exceptionally fast “out of cushion” stroke
reversal without the use of ball checks.
Figure 1
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-9
Series A & EA, NFPA Aluminum Decel-Air Cushioned Cylinder
Series J & EJ, NFPA Steel Decel-Air Cushioned Cylinder
Decel-Air™ Cushioned Cylinder
Adjustable Captive
Cushion Needle is a
one-piece, precision
threaded brass cushion
adjustment screw with a
threaded steel capture
ring. It provides safe and
precise cushion
adjustment
Eliminates the need for shock absorbers on air cylinder applications.
Decel-Air Cushion Spacer
Block allows for extra
cushion length and longer
deceleration
Impact Dampening
“Ecology” Piston Seals
absorb final impact and
provide end of stroke
cushioning assistance.
Extra cushion sleeve and
stud length for longer
deceleration
Ultra Cushion Seals are made of nitrile*
captured within a precision machined groove.
The seal’s linear and radial “float” eliminates
misalignment and provides exceptionally fast
“out of cushion” stroke reversal.
*Nitrile seals on the 5/8" and 1" rod diameter. For rod
sizes 1-3/8" and larger urethane seals are standard.
Explanation of Decel-Air Cushion:
Norgren’s Decel Cushioned cylinder was designed for
applications where high velocity, low mass, material transfer or
machine function is required, and where the kinetic energy to
be absorbed during cushioning exceeds the parameters of our
standard Series EA or EJ air cylinders equipped with nonadjustable or adjustable cushions. Decel cushions employ
longer-than-standard air cushions to assist our Impact
Dampening Piston Seal.
Why does our Decel-Air Cushion work?
The extra cushion length of the Decel cushioned cylinder
provides an additional deceleration capability to slow the
cylinder’s moving mass to a point where the positive
cushioning effect of our Impact Dampening Piston Seals can
perform the final cushioning.
Norgren’s Decel-Air Cushioned Cylinders
Versus
Cylinder Mounted Shock Absorbers
The first extensive evaluation of pneumatic cylinder cushion
performance was undertaken by the Mechanical Engineering
Department of The Ohio State University. The test was
conducted on 2-1/2” bore, 12” stroke.
The OSU tests found the Decel Cushioned cylinders absorbed
almost three times as much kinetic energy with a lower level of
peak cushion as a standard Ecology seal configured cylinder.
ACT-1-10
Brookville, OH USA
Because air is compressible and is exhausted out of the
cylinder each cycle, the internal heat buildup is minimized. The
“Maximum Inch Pounds Per Hour” rating which is essential in
determining the effectiveness of shock absorber performance
is not needed to judge Decel cushion performance.
The test indicated that Norgren Decel-Air Cushioned cylinders
could prove to be superior to a hydralic shock absorber
assisted cylinder for high cycle, high velocity applications with
light to moderate loading (precisely the area where most
severe cylinder applications exist). The cycle rates and the
cushioning times of the Decel-Air Cushioned cylinders and the
hydraulic shock absorber assisted cylinders were
comparable.*
Decel-Air Cushioned cylinders are also less costly than shock
absorber mounted cylinders and are self-contained units.
*For comparative evaluation, a well-known hydraulic shock
absorber was chosen. The OSU tests showed a smooth shockabsorbing operation was achieved at very low velocities using
the shock absorbers, but at comparable Decel Cushion cylinder
velocities, a high mechanical impact took place on the shock
absorber mounted cylinder.
Potential Decel-Air Cushion Applications
1.
2.
3.
4.
5.
Conveyors & Material Handling Equipment
Transfer Machines & Shuttle Tables
Packaging Machinery
Foundry Equipment
Automatic Gate Opening & Closing
Phone 937-833-4033
www.norgren.com
Series A & EA, NFPA Aluminum Decel-Air Cushioned Cylinder
Series J & EJ, NFPA Steel Decel-Ar Cushioned Cylinder
All Dimensions in Inches (mm)
● The Decel Cushioned cylinder increases the kinetic
energy absorption capability by increasing the effective
cushion spear length in the cylinder.
● The Decel Cushioned cylinder increases the standard
cushion spear length by 100%, allowing an increase in
kinetic energy absorption capability by two times.
Decel Cushioned Cylinder
Fully Cushioned Load Stopping Capacity in Pounds*
In/
Sec
6
12
18
24
30
36
42
48
54
1-1/2
558
136
60
32
20
13.4
9.4
6.8
4.6
2
990
244
106
58
36
24
16.6
11.4
8.6
2-1/2
1.798
442
190
104
64
43
29
20.8
10.8
3-1/4
3.488
860
374
204
126
84
58
42
30
Cylinder Bore
4
5
6
5.418 9.370 14.972
1.338 2.318 3.708
582
1.014 1.620
320
558
888
198
344
550
132
232
366
92
162
258
66
118
186
48
86
136
7
20.040
5.166
2.260
1.244
774
518
362
262
194
8
20.858
7.600
3.152
1.738
1.082
726
514
374
276
10
44.070
10.892
4.748
2.598
1.602
1.062
734
524
378
12
72.500
17.894
7.782
2.828
2.606
1.712
1.176
830
590
Piston Rod Dia. Weights*
5/8"
1"
1-3/8"
1-3/4"
2"
2-1/2"
- .30 lb. + 0.09 lb./in. stroke
- .90 lb. + 0.22 lb./in. stroke
- 2.2 lb. + 0.42 lb./in. stroke
- 4.0 lb. + 0.68 lb./in. stroke
- 5.5 lb. + 0.90 lb./in. stroke
- 10.1 lb. + 1.40 lb./in. stroke
Double Weight for double rod end cylinders
*Include piston rod wight in total load to be stopped.
G
J
J
J
MB + Stroke
NOTE:
• All dimensions not shown are per STD NFPA dimensions
• For cylinders with (1) Decel Cushion AOL dimension wil be “MB”-“J”.
Basic Envelope Dimensions
Decel Cushioned cylinder envelope dimensions are not NFPA
dimensionally interchangeable over the stroke length.
NOTE: See page ACT-1-8 for “Effect of Impact Dampening
Seals on Total Stroke of Cylinders,” and page ACT-1-19 for
Rod End Dimensions.
Brookville, OH USA
Cyl.
Bore
1-1/2
2
2-1/2
3-1/4
4
5
6
7
8
Phone 937-833-4033
G
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
1-3/4
2
2
2
J
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
www.norgren.com
Add Stroke
MB
5-5/8
5-5/8
5-3/4
6-3/4
6-3/4
7
8
8-1/8
8-1/8
ACT-1-11
Series EA, NFPA Aluminum Air Cylinders (ø1-1/2" to 8"), Impact Dampening Seals
Series EJ, NFPA Steel Air Cylinders (ø1-1/2" to 12"), Impact Dampening Seals
Tests by the Milwaukee School of Engineering confirm
Ecology Cylinder Cushions are more efficient, faster acting
and bounce less!
NORGREN ECOLOGY CYLINDERS
with Non-Adjustable Cushions
NORGREN ECOLOGY CYLINDERS
with Adjustable Cushions
COMPETITIVE CYLINDERS
with Adjustable Cushions
2" Bore Rod End Cushion Test
Average deceleration force = 15 G's
Time consumed during cushioning = 0.030 sec.
Number of bounces: 1 Pneumatic – 1 Metallic
Number of bounces: 1/2 Pneumatic – 0 Metallic
Acceleration:
1 div. = 10
G’s
X Axis: 1 div.
= .03 seconds
Acceleration:
1 div. = 10
G’s
X Axis: 1 div.
= .03 seconds
Acceleration:
1 div. = 10
G’s
X Axis: 1 div.
= .03 seconds
Velocity: 1 div.
= 20 in/sec.
14.5 lbs.
added to rod
Velocity: 1 div.
= 20 in/sec.
2.5 lbs.
added to rod
Velocity: 1 div.
= 20 in/sec.
14.5 lbs.
added to rod
2" Bore Cap End Cushion Test
Number of bounces: 1/2 Pneumatic – 0 Metallic
Average deceleration force = 17.5 G's
Acceleration:
1 div. = 10
G’s
X Axis: 1 div.
= .03 seconds
Acceleration:
1 div. = 10
G’s
X Axis: 1 div.
= .03 seconds
Acceleration:
1 div. = 10 G’s
X Axis: 1 div. =
.02 seconds
Velocity: 1 div.
= 20 in/sec.
14.5 lbs.
added to rod
Velocity: 1 div.
= 20 in/sec.
2.5 lbs. added
to rod
Velocity: 1 div.
= 20 in/sec.
14.5 lbs.
added to rod
2" Bore Cylinder Tests Results
4" Bore Cylinder Tests Results
Figures shown are average and not the result of each individual test. Piston velocity was
regulated at 45 in/sec.
Figures shown are average and not the result of each individual test. Piston velocity was
regulated at 25 in/sec.
Cylinders with
Cushions
Norgren Ecology
Adjustable
Norgren Ecology
Non-Adjustable
Competitor A
Adjustable
Competitor B
Adjustable
Competitor C
Adjustable
Weight attached Cushion Efficiency Cushioning Bounce Cycles
to Piston Rod (lbs) (G’s* Created) Time (Ms) During Cushioning
8.5
8.5
8.5
8.5
8.5
14.50
17.50
48.00
32.75
50.50
25.00
26.25
107.50
102.50
81.25
Cylinders with
Cushions
Weight attached Cushion Efficiency Cushioning Bounce Cycles
to Piston Rod (lbs) (G’s* Created) Time (Ms) During Cushioning
1.00
Norgren Ecology
Adjustable
54
5.25
40.00
3.25
1.75
Norgren Ecology
Non-Adjustable
54
12.00
28.75
2.75
7.25
Competitor A
Adjustable
54
11.50
92.50
6.75
6.50
Competitor B
Adjustable
54
8.00
77.50
5.25
9.25
Competitor C
Adjustable
54
6.50
67.50
6.25
*Measured in G’s of deceleration force created. All cylinders tested were NFPA types,
front flange mounting, 6" stroke with standard diameter piston rods.
*Measured in G’s of deceleration force created. All cylinders tested were NFPA types,
front flange mounting, 6" stroke with standard diameter piston rods.
ACT-1-12
Phone 937-833-4033
Brookville, OH USA
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders, Technical Information
Series J & EJ, NFPA Steel Air Cylinders, Technical Information
All Forces in Pounds (Newtons)
Cylinder Force and Volume Charts
Extend Forces in pounds (newtons)
Bore
(14)
Volume
Cu Ft (cm3)
Displacement
Per Inch
353
(1570)
.00102 (29)
628
(2793)
.00182 (52)
982
(4368)
.00284 (80)
PSI (bar)
Piston
Area
40
(3)
60
(4)
80
(6)
100
(7)
150
(10)
200
177
(786)
314
(1398)
266
(1179)
471
(2097)
491
830
(2185)
737
(3277)
(3692)
1245 (5538)
1659 (7379)
.00480 (136)
1005 (4473)
1571 (6988)
1257 (5592)
1886 (8388)
2513 (11178)
.00727 (206)
1964 (8736)
2946 (13104) 3928 (17472)
.01137 (322)
11/2"
1.77
(11.40)
71
(315)
106
(472)
142
(629)
2"
3.14
(20.27)
126
(559)
189
(839)
251
(1119)
21/2"
4.91
(31.67)
196
(874)
295
(1311)
393
(1748)
31/4"
8.30
(53.32)
332
(1477)
498
(2215)
664
(2953)
4"
12.57
(81.07)
503
(2237)
754
(3355)
5"
19.64
(126.71) 785
(3491)
1178 (5240)
6"
28.27
(182.39) 1130 (5026)
1696 (7544)
2262 (10061) 2827 (12574) 4240 (18860) 5654 (25149)
.01636 (463)
7"
38.49
(247.91) 1540 (6831)
2309 (10242) 3079 (13658) 3849 (17074) 5774 (25613) 7698 (34148)
.02227 (631)
8"
50.26
(324.26) 2010 (8940)
3015 (13411) 4020 (17881) 5026 (22356) 7539 (33533) 10052 (44711)
.02909 (829)
10"
78.54
(506.74) 3141 (13974) 4712 (20961) 6283 (27948) 7854 (34935) 11781 (52402) 15700 (69834)
12"
113.10
.04545 (1282)
(729.72) 4524 (20123) 6786 (30184) 9048 (40246) 11310 (50307) 16965 (75460) 22620 (100614) .06545 (1852)
Deduct these Forces for Retract Strokes
Rod
(14)
Volume
Cu Ft (cm3)
Displacement
Per Inch
61
(271)
.00018
(5)
157
(698)
.00045
(13)
297
(1321)
.00086
(24)
480
(2135)
.00139
(39)
628
(2795)
.00182
(52)
981
(4367)
.00284
(80)
PSI (bar)
Rod
Area
40
(3)
60
(4)
80
(6)
100
5/8"
.307
(1.98)
12
(53)
18
(80)
25
(111)
1"
.785
(5.06)
31
(138)
47
(209)
63
(280)
13/8"
1.485
(9.58)
59
(262)
89
(396)
119
(529)
13/4"
2.404 (15.51)
96
(423)
144
(641)
192
(854)
2"
3.142 (20.16)
126
(559)
189
(839)
251
(1118)
21/2"
4.909 (31.67)
196
(873)
295
(1310)
393
(1747)
Bore Size Selection:
Use the following formulas in the selection
of the proper bore size:
• Extended force in pounds =
Bore area (in2) times
pressure to cap in psig.
• Retract force in pounds =
Bore area minus rod area (in2)
times pressure to head in psig.
(7)
150
31
(138)
78
(351)
149
(663)
240
(1068)
314
(1398)
491
(2184)
Bore Areas
(10)
200
46
(205)
118
(525)
222
(997)
360
(1601)
471
(2096)
736
(3275)
Rod Areas
Cylinder
Bore
Area (sq. in.)
Rod
Diameter
Area (sq. in.)
1-1/2"
1.77
5/8"
.31
2"
3.14
1"
.78
2-1/2"
4.91
1-3/8"
1.49
3-1/4"
8.30
1-3/4"
2.41
4"
12.57
2"
3.14
2-1/2"
4.91
5"
19.64
6"
28.27
7"
38.49
8"
50.26
10"
78.54
12"
113.10
NOTE:
A & EA Rod Dia. (5/8" – 1-3/4")
J & EJ Rod Dia. (5/8" – 2-1/2")
NOTE:
A & EA Bore Sizes (1-1/2" – 8")
J & EJ Bore Sizes (1-1/2" – 12")
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-13
Series A & EA, NFPA Aluminum Air Cylinders, Technical Information
Series J & EJ, NFPA Steel Air Cylinders, Technical Information
Piston Rod Diameter Selection:
Applications requiring long extend (push) strokes may require
oversize piston rod diameters to prevent buckling.
To determine the correct rod diameter for your application
follow these simple steps:
1. Select the thrust from the Cylinder Force and Volume Chart
(page ACT-1-13) that is required for your application.
Thrust = Piston Surface Area x Operating Pressure
2. From the Cylinder Mounting Diagram Chart
(page ACT-1-15) select the mounting style being used.
3. With the piston rod fully extended, calculate the value of L (in
inches). Multiply cylinder stroke by appropriate stroke factor
located in Cylinder Mounting Diagram Chart to obtain
effective length L.
4. Locate the value of L (in inches) from the Determining
Adequate Rod Diameter Chart.
5. Selecting Stop Tubes: Stop tubes enhance the transverse load
carrying capability of a long stroke cylinder by increasing the distance
between the piston and rod bearing at full extension (Refer to page
ACT-1-87). When the value of L (calculated from the Adequate Rod
Diameter Chart) is less than 40", a stop tube is not required.
However, if L is 40" or more, 1" of stop tube is recommended for every
10" (or fraction thereof) over 40".
6. Recommended Mounting Styles for Maximum Stroke and
Thrust Load:
• Multiply cylinder stroke by appropriate stroke factor to obtain
effective length L.
• If cylinder has extra rod extension, add this extension to the stroke
length before obtaining effective length.
Determining Adequate Rod Diameter Chart
Extended
Force
(lbs)
5/8"
95
65
50
43
34
25
20
17
13
11
9
7
–
–
–
–
–
–
–
50
100
150
200
300
500
750
1000
1500
2000
3000
4000
5000
6000
8000
10000
12500
15000
20000
Maximum effective length “L”
recommended for rod diameters
1"
1-3/8"
1-3/4"
–
–
–
170
–
–
135
260
–
115
220
–
93
180
300
70
135
250
56
110
185
48
94
160
38
80
130
33
64
110
26
51
90
22
44
75
20
39
66
18
35
60
15
30
52
12
26
46
10
22
41
–
19
37
–
14
29
2"
–
–
–
–
–
–
250
220
170
140
115
100
88
79
68
60
52
48
41
2-1/2"
–
–
–
–
–
–
–
–
260
225
180
155
140
125
110
95
86
79
68
Note: In some cases it may be necessary to use a larger bore cylinder than is required
for force in order to obtain an adequate rod diameter.
Recommended Torques for Tightening Tie Rods
Tie Rod Tightening:
In order to reduce the possibility of cylinder binding or damage,
tighten to quarter unit increments of the final torque value in the
following order: #1, #2, #3, #4.
Then torque fully to the recommended foot pounds in the same order.
1
4
ACT-1-14
3
2
Brookville, OH USA
Cylinder
Bore
Standard
Steel Tie Rods
Stainless Steel
Tie Rods
1-1/2"
6.6 ft. lbs.
3.75 ft. lbs.
2"
11 ft. lbs.
7.5 ft. lbs.
2-1/2"
13 ft. lbs.
7.5 ft. lbs.
3-1/4"
20 ft. lbs.
13-14 ft. lbs.
4"
24 ft. lbs.
13-14 ft. lbs.
5"
40 ft. lbs.
33 ft. lbs.
6"
48 ft. lbs.
33 ft. lbs.
7" & 8"
100 ft. lbs.
65 ft. lbs.
10"
150 ft. lbs.
75 ft. lbs.
12"
175 ft. lbs.
87.5 ft. lbs.
Phone 937-833-4033
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders (ø1-1/2" to 8"), Technical Information
Series J & EJ, NFPA Steel Air Cylinders (ø1-1/2" to 12"), Technical Information
Cylinder Mounting Diagram Chart
Cylinder
Mounting
Rod End
Connection
Side Tapped, Head or
Fixed and
Cap Flange, Tie Rod,
Rigidly Guided
Example
Stroke
Factor
.50
Center or Side Lug
Pivoted and
Rigidly Guided
.70
Center or Side Lug
Supported but
not Rigidly Guided
2.00
None
5.00
Pivoted and
1.00
Center or Side Lug
Center or Side Lug
Head Trunnion
Rigidly Guided
Center Trunnion
Pivoted and
1.50
Rigidly Guided
Cap Trunnion
or Clevis
Pivoted and
Rigidly Guided
2.00
Number of Tie Rod Supports Required
Tie Rod Supports:
For long strokes, tie rod supports are provided.
These supports are of the same envelope dimensions as
the cylinder end caps.
NOTE: See chart for number of tie rod supports required.
Brookville, OH USA
Cylinder
Bore
60
Cylinder Stroke (in)
75
95
115
1-1/2"
1
1
2
2
3
2"
–
1
1
2
2
2-1/2"
–
–
1
1
1
3-1/4"
–
–
–
1
1
4"
–
–
–
–
1
5" and over
–
–
–
–
–
Phone 937-833-4033
www.norgren.com
135
ACT-1-15
Series A & EA, NFPA Aluminum Air Cylinders (ø1-1/2 to 8"), Technical Information
Series J & EJ, NFPA Steel Air Cylinders (ø1-1/2 to 12"), Technical Information
All Weights in Pounds (Kilograms)
Series A & EA Cylinder Weights
In pounds (kilograms)
Mounting Code
Bore
Inch (mm)
11/2" (38.10)
2"
(50.80)
21/2" (63.50)
31/4" (82.55)
4"
(101.60)
5"
(127.00)
6"
(152.40)
7"
(177.80)
8"
(203.20)
Rod
Inch (mm)
5/8" (15.88)
01, 05, 16
(.86)
1.9
2.6
(1.18)
2.7
(.23)
5/8" (15.88)
2.8
(1.27)
3.9
(.77)
4.0
(1.81)
3.1
(1.41)
3.5
(1.59)
3.3
(1.50)
4.0 (1.81)
3.8 (1.72)
4.2
(1.91)
3.9 (1.77)
0.21 (.10)
(25.40)
3.4
(1.54)
4.4
(2.00)
4.6
(2.09)
3.7
(1.68)
4.1
(1.86)
3.9
(1.77)
4.6 (2.09)
4.4 (2.00)
4.8
(2.18)
4.5 (2.04)
0.35 (.16)
5/8" (15.88)
3.9
(1.77)
5.3
(2.40)
5.5
(2.49)
4.1
1.86)
4.6
(2.09)
4.4
(2.00)
5.3 (2.40)
5.3 (2.40)
5.5
(2.49)
5.3 (2.40)
0.23 (.10)
1"
(25.40)
4.5
(2.04)
5.9
(2.68)
6.1
(2.77)
4.7
(2.13)
5.2
(2.36)
5.1
(2.31)
5.9 (2.68)
6.0 (2.72)
6.1
(2.77)
5.9 (2.68)
0.38 (.17)
1"
1"
03
04
06
2.1
7R, 8R, 09, 60
(.95) 2.5
(1.13)
11
2.3 (1.04)
12
2.8 (1.27)
15
20, 21, 22, 32
2.5 (1.13)
3.0 (1.36)
10, 42, 52
2.8 (1.27)
Add Per Inch
of Stroke
0.18 (.08)
(25.40)
7.3
(3.31) 10.8
(4.90) 11.1
(5.03)
7.7
(3.49)
8.9
(4.04)
8.2
(3.72) 11.1 (5.03)
9.7 (4.40)
11.8
(5.35) 11.4 (5.17)
0.42 (.19)
13/8" (34.93)
8.2
(3.72) 11.5
(5.22) 12.1
(5.49)
8.7
(3.95)
9.9
(4.50)
9.2
(4.17) 12.1 (5.49) 10.7 (4.85)
12.8
(5.80) 12.4 (5.62)
0.63 (.29)
(25.40)
9.8
(4.45) 14.8
(6.71) 15.1
(6.85) 10.2
(4.63) 11.5
(5.22) 10.9
(4.94) 14.8 (6.71) 13.3 (6.03)
15.5
(7.03) 15.2 (6.89)
0.45 (.20)
13/8" (34.93) 10.8
(4.90) 15.5
(7.03) 16.1
(7.30) 11.2
(5.08) 12.5
(5.67) 11.9
(5.40) 15.8 (7.17) 14.3 (6.49)
16.5
(7.48) 16.2 (7.35)
0.66 (.30)
(25.40) 15.1
(6.85) 22.7 (10.30) 23.1 (10.48) 16.1
(7.30) 18.7
(8.48) 17.6
(7.98) 22.2 (10.07) 20.8 (9.43)
22.8 (10.34) 22.5 (10.21)
0.51 (.23)
13/8" (34.93) 16.2
(7.35) 23.5 (10.66) 24.1 (10.93) 17.2
(7.80) 19.7
(8.94) 18.6
(8.44) 23.2 (10.52) 21.9 (9.93)
23.9 (10.84) 23.5 (10.70)
0.73 (.33)
13/8" (34.93) 23.5 (16.19) 35.6 (16.15) 36.3 (16.47) 24.5 (11.11) 27.3
(12.38) 26.6 (12.07) 35.7 (10.66) 32.1 (14.56)
37.0 (16.78) 36.3 (16.47)
0.77 (.35)
13/4" (44.45) 24.8 (11.27) 36.9 (16.77) 37.6 (17.09) 25.8 (11.73) 28.3
(12.86) 27.9 (12.68) 37.0 (16.82) 33.4 (15.18)
38.3 (17.41) 37.6 (17.09)
1.03 (.47)
13/8" (34.93) 32.1 (14.56) 32.1 (14.56) 32.1 (14.56) 33.4 (15.15) 33.5
(15.20) 36.8 (16.69) 35.2 (15.97) 32.1 (14.56)
48.9 (22.18) 48.2 (21.86)
1.00 (.45)
13/4" (44.45) 33.4 (15.18) 33.4 (15.18) 33.4 (15.18) 34.7 (15.77) 34.8
(15.82) 38.1 (17.32) 36.5 (16.59) 33.4 (15.18)
50.2 (22.82) 49.5 (22.50)
1.26 (.57)
13/8" (34.93) 40.0 (18.14) 40.0 (18.14) 40.0 (18.14) 41.3 (18.73) 41.4
(18.78) 45.7 (20.73) 43.0 (19.50) 40.0 (18.14)
60.5 (27.44) 59.7 (27.08)
1.06 (.48)
13/4" (44.45) 47.3 (21.50) 41.3 (18.77) 41.3 (18.77) 42.6 (19.36) 42.7
(19.41) 47.0 (21.36) 44.3 (20.14) 41.3 (18.77)
61.8 (28.09) 61.0 (27.73)
1.32 (.60)
1"
1"
Series J & EJ Cylinder Weights
Mounting Code
Bore
Inch (mm)
11/2" (38.10)
2"
(50.80)
21/2" (63.50)
1
3 /4" (82.55)
4"
5"
6"
7"
8"
(101.60)
(127.00)
(152.40)
(177.80)
(203.20)
10" (254.00)
12" (304.80)
ACT-1-16
Rod
Inch (mm)
5/8" (15.88)
01, 05, 16
3.1 (1.42)
03
3.7 (1.67)
04
3.7 (1.67)
06
3.2 (1.48)
07, 08, 09
3.8 (1.73)
11
12
3.9 (1.76)
Add Per Inch
10, 42, 52
of Stroke
4.9 (2.24) .18 (.08)
15
20, 21, 22, 32
3.1 (1.42) 4.1 (1.87)
4.9
(2.24)
5/8"
(15.88)
5.0
(2.27)
5.9
(2.67)
5.9
(2.67)
5.2
(2.35)
5.7
(2.58)
7.6
(3.46)
5.8
(2.61)
5.0
(2.27)
6.2 (2.82)
7.6
(3.46) .28 (.13)
1"
(25.40)
5.1
(2.33)
6.0
(2.73)
6.0
(2.73)
5.3
(2.42)
5.8
(2.64)
7.8
(3.52)
5.9
(2.67)
5.1
(2.33)
6.4 (2.89)
7.8
(3.52) .42 (.19)
5/8"
(15.88)
7.2
(3.26)
8.1
(3.68)
8.1
(3.68)
7.4
(3.35)
7.9
(3.57)
10.3
(4.68)
7.9
(3.60)
7.2
(3.26)
9.3 (4.20) 10.3
(4.68) .40 (.18)
1"
(25.40)
7.3
(3.32)
8.3
(3.75)
8.3
(3.75)
7.5
(3.41)
8.0
(3.64)
10.5
(4.74)
8.1
(3.66)
7.3
(3.32)
9.4 (4.26) 10.5
(4.74) .54 (.25)
1"
(25.40) 11.1
(5.02)
14.3
(6.50) 14.3
(6.50) 11.4
(5.16)
11.7
(5.30)
16.8
(7.63) 12.6
(5.70) 11.1
(5.02) 16.0 (7.26) 16.8
(7.63) .72 (.33)
13/8" (34.93) 11.3
(5.11)
14.5
(6.59) 14.5
(6.59) 11.6
(5.25)
11.9
(5.39)
17.0
(7.72) 12.8
(5.79) 11.3
(5.11) 16.2 (7.35) 17.0
(7.72) .92 (.42)
(25.40) 20.3
(9.22)
24.9 (11.29) 24.9 (11.29) 20.6
(9.36)
20.8
(9.45)
27.4 (12.43) 21.8
(9.90) 20.3
(9.22) 26.9 (12.20) 27.4 (12.43) .81 (.37)
13/8" (34.93) 20.5
(9.31)
25.1 (11.38) 25.1 (11.38) 20.8
(9.45)
21.0
(9.54)
27.6 (12.52) 22.0
(9.99) 20.5
(9.31) 27.1 (12.29) 27.6 (12.52) 1.1
1"
(.50)
(25.40) 34.6 (15.72)
40.4 (18.33) 40.4 (18.33) 35.2 (15.97)
38.0 (17.25)
43.2 (19.60) 36.3 (16.49) 34.6 (15.72) 43.2 (19.60) 43.2 (19.60) .98 (.45)
13/8" (34.93) 34.8 (15.81)
40.6 (18.42) 40.5 (18.42) 35.4 (16.06)
38.2 (17.34)
43.4 (19.69) 36.5 (16.58)
13/8" (34.93) 53.1 (24.09)
63.9 (29.02) 63.9 (29.02) 54.3 (24.66)
56.4 (25.59)
65.3 (29.65) 57.1 (25.93) 53.1 (24.09) 68.1 (39.81) 65.3 (29.65) 1.68 (.76)
13/4" (44.45) 53.3 (24.21)
64.2 (31.41) 64.2 (31.41) 54.6 (24.78)
56.7 (25.72)
65.6 (29.77) 57.4 (26.05) 53.3 (24.21) 68.1 (30.93) 65.6 (29.77) 1.94 (.88)
13/8" (34.93) 73.0 (33.14)
73.0 (33.14) 73.0 (33.14) 74.0 (33.60)
76.5 (34.73)
96.0 (43.58) 85.0 (38.59) 73.0 (33.14)
—
13/4" (44.45) 73.3 (33.26)
73.3 (33.26) 73.3 (33.26) 74.3 (33.71)
76.8 (34.85)
96.3 (43.70) 85.3 (38.71) 73.3 (33.26)
—
96.3 (43.70) 2.01 (.91)
13/8" (34.93) 92.3 (41.88)
92.3 (41.88) 92.3 (41.88) 93.6 (42.50)
95.8 (43.47) 120.0 (54.48) 97.8 (44.41) 92.3 (41.88)
—
120.0 (54.48) 2.18 (.99)
13/4" (44.45) 92.5 (42.00)
92.5 (42.00) 92.5 (42.00) 93.9 (42.62)
1"
34.8 (15.81) 43.4 (19.69) 43.4 (19.69) 1.18 (.54)
96.0 (43.58) 1.75 (.80)
96.0 (43.59) 120.3 (54.60) 98.1 (44.52) 92.5 (42.00)
—
120.3 (54.60) 2.44 (1.11)
13/4" (44.45) 179.9 (81.66) 179.9 (81.66) 179.9 (81.66) 181.6 (82.46) 184.3 (83.65) 228.0 (103.51) 186.1 (84.50) 179.9 (81.66)
—
228.0 (103.51) 3.43 (1.56)
2"
(50.80) 180.0 (81.72) 180.1 (81.76) 180.1 (81.76) 181.8 (82.55) 184.5 (83.74) 228.2 (103.61) 186.3 (84.59) 180.1 (81.76)
—
228.2 (103.61) 3.64 (1.65)
2"
(50.80) 288.0 (130.75) 288.0 (130.75) 288.0 (130.75) 289.0 (131.21) 293.0 (133.02) 380.0 (172.52) 297.0 (134.84) 288.0 (130.75)
—
380.0 (172.52) 4.12 (1.87)
21/2" (63.50) 288.5 (130.98) 288.5 (130.98) 288.5 (130.98) 289.5 (131.43) 293.5 (133.25) 380.5 (172.75) 297.5 (135.20) 288.5 (130.98)
—
380.5 (172.75) 4.62 (2.10)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders (ø1-1/2" to 8"), Breakaway Pressures
Series J & EJ, NFPA Steel Air Cylinders (ø1-1/2" to 12"), Breakaway Pressures
Breakaway Pressures
An average of 5 pounds (psig) is necessary to breakaway noncushioned Series J air cylinders when mounted horizontally
with no load on the piston rod. Double rod end cylinders
require an average of 7 pounds (psig).
These figures are for non-cushioned
cylinders with strokes of 6 inches or
less with factory lubrication. Consult
the factory if your application requires
a lower breakaway pressure or a
guaranteed minimum breakaway.
Series A & J cylinders with 3-1/4" thru
12" diameter pistons are counterbored
to provide a larger area for the
pressure
to act upon.
Listed are the average breakaway
pressures in PSI for all Series J & EJ
Cylinders. If your application requires a
lower breakaway pressure than
indicated for a particular bore size,
consult the factory.
Brookville, OH USA
An average of 6 pounds (psig) is required to breakaway single
rod and Series A & J and Series EA & EJ air cylinders
equipped with optional non-adjustable air cushions. Double
rod end cylinders require an average of 8 pounds (psig).
Breakaway Pressures in PSI
Bore
Series A
Extend
Retract
11/2", 2", 21/2"
31/4", 4"
5", 6", 7", 8"
Bore
5
4
3
6
5
4
Series J
Extend
Retract
11/2", 2", 21/2"
31/4", 4"
5", 6", 7", 8"
10"
12"
5
4
3
3
3
6
5
4
4
4
Low Friction Seals (LF)
Extend
Retract
3
2
1
4
3
2
Low Friction Seals (LF)
Extend
Retract
3
2
1
1
1
4
3
2
2
2
Note: Breakaway pressures were established with
the cylinders mounted horizontally and no load on
the piston rod.
Phone 937-833-4033
www.norgren.com
ACT-1-17
Series A & EA, NFPA Aluminum Air Cylinders (ø1-1/2 to 8")
Series J & EJ, NFPA Steel Air Cylinders (ø1-1/2 to 12")
● NFPA (MS4) 01 Side Tapped Mount
for 1-1/2" to 6" bore sizes.
● Series A &J Cylinders rated to 250 PSI air,
400 PSI hydraulic (non-shock).
Series EA & EJ Cylinders rated to 250 PSI air only.
● Designed for non-lube service.
● Switches available on all bore sizes.
(See pages ACT-1-90 & 91 for ordering information.)
Cylinder Order Information
01
A
EA
J
EJ
–
–
Bore and Stroke (write out )
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
Additional Options – order alphabetically – More on page ACT-1-95
HR
Case Hardened (45 Rc)
L(_ _) Port Location position 1 standard: L(Head Cap)
(specify position 1 thru 4 for head and/or cap)
MS
Metal Rod Scraper
N(_ _) Cushion Adjust Screw Location position 2 standard: N(Head
Cap) (specify position 1 thru 4 for head and/or cap)
P(_)* Non-Standard Port Sizes: [specify port size for P(_H) head
only, P(_C) cap only, or P(_) both head & cap]
PS
Magnetic Piston – includes aluminum tube option for J & EJ - Std. for Alum
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
Rod Extensions (specify length of additional rod extension)
SC
Single Acting Spring Extend (Cap End)–See page ACT-1-86
SR
Single Acting Spring Retract (Rod End)–See page ACT-1-86
SS
303 Stainless Steel (Hard Chrome Plated)
ST(_C) Stop Tube (Cap End) (specify stop tube length)
ST(_R) Stop Tube (Rod End) (specify stop tube length)
T
Special Rod Threads (specify rod thread)
TK
Thrust Key
TX
Thread Extensions (specify length of thread extension)
V
Viton® Seals
Mounting Options
01 Side Tapped (MS4)
03 Head Rectangular Flange (MF1)
03 Head Square (ME3)– 7" to 12" Bores
04 Cap Rectangular Flange (MF2)
04 Cap Square (ME4)– 7" to 12" Bores
05 Basic Cylinder No Mounting (MX0)
06 Both Ends (4) Tie Rods Ext. (MX1)
6B Both Ends (2) Tie Rods Ext. (MX4)
6C Cap Tie Rods Ext. (MX2)
6R Head Tie Rods Ext. (MX3)
7R Removable Head Trunion (MT1) - A & EA
07 Head Trunnion (MT1) - J & EJ
8R Cap Trunion (MT2) - A & EA
08 Cap Trunnion (MT2( - J & EJ
09 Side Lugs (MS2)
10 Center Trunnion (MT4)
11 Side End Angles (MS1)
12 Cap Fixed Clevis (MP1)
15 Side End Lugs (MS7)
16 Sleeve Nut Construction (Universal)
20 Head Square Flange (MF5)
21 Cap Square Flange (MF6)
22 Detachable Cap Clevis (MP2)
32 Cap Fixed Eye (MP3)
42 Detachable Cap Eye (MP4)
60 Base Bar (Not NFPA - A & EA Only)
*11/2", 2", 21/2" bore cylinders have 3/8" NPT Standard, 1/2" NPT oversize.
31/4", 4", 5" bore cylinders have 1/2" NPT Standard, 3/4" NPT oversize.
This will add 1/8" to the overall cylinder length.
Piston Rod Threads Type
1
Small Male (Solid)
2
Intermediate Thread Male (Solid)
3
Female
6
Full Thread Male (Solid)
7
Plain Rod End
Cushion in Head
3 None
5† Non-Adjustable Cushion
7 Adjustable Cushion (Position 2)
9 Decel Cushion
†
Standard with EA & EJ
Cushion in Cap
3 None
9 Decel Cushion
†
See page ACT-1-96 for complete
instructions on how to order cylinders.
ACT-1-18
–
–
Brookville, OH USA
1
Piston Rod Diameters
A** 5/8"
Standard on 11/2", 2", 21/2"
Standard on 31/4", 4", 5"
B**
1"
Oversized on 11/2", 2", 21/2"
Standard on 6", 7", 8"
C** 13/8"
Oversized on 31/4", 4", 5"
Standard
on 10"
D** 13/4"
Oversized on 6", 7", 8"
Standard on 12"
E
2"
Oversized on 10"
F
21/2" Oversized on 10", 12"
4
2
3
Port and Cushion Adjustment
Positions (As viewed from rod end:
Port standard position 1, Cushion
Adjustment standard position 2.)
NOTE: A Port and a Cushion Adjustment
cannot be in the same position.
** A & EA uses A-D only.
Phone 937-833-4033
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 01 (MS4) Side Tapped
Series J & EJ, NFPA Steel Air Cylinders with 01 (MS4) Side Tapped
Y
EE NPT (2)
P + Stroke
WF
øB Bushing
øMM
KK
Thds
E
2
A
D
(Flats)
TN
Standard &
Optional Rod Ends
R
VF
øB
CC
Thds.
øMM
A
A
D
Across
Flats
LB + Stroke
ZB + Stroke
øB
CC
Thds.
øMM
VF
øB
KK
Thds.
A Deep
øMM
A
C
C
K
SN + Stroke
XT
E Sq.
øB
KK
Thds.
øB
KK
Thds.
J
G
C
NT Tap
ND Deep
øB
FF
Thds.
øMM
øMM
A
C
VF
A
C
VF
øMM
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
(Studded Male Optional)
(Intermediate Thread
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50) 31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (203.20)
Std.
ø Rod
O.S.
Std.
A
O.S.
+.000 Std.
B
-.002 O.S.
Std.
C
O.S.
Std.
CC
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(9.53)
.375
1/4 – 20
(59.44)
2.340
(36.27)
1.428
(57.15)
2.250
(15.88)
.625
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(49.21)
1.938
(58.74)
2.313
(46.74)
1.840
(56.39)
2.220
4.875 (123.83)
5.250 (133.35)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(9.53)
.375
5/16 – 18
(59.44)
2.340
(46.68)
1.838
(57.15)
2.250
(22.23)
.875
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(49.21)
1.938
(58.74)
2.313
(46.74)
1.840
(56.39)
2.220
4.938 (125.41)
5.313 (134.94)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(12.70)
.500
3/8 – 16
(62.74)
2.470
(55.67)
2.192
(60.33)
2.375
(31.75)
1.250
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(49.21)
1.938
(58.74)
2.313
(46.74)
1.840
(56.39)
2.220
5.063 (128.59)
5.438 (138.11)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(19.05)
.750
1/2 – 13
(68.33)
2.690
(84.40)
3.323
(66.68)
2.625
(52.37)
2.063
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(61.91)
2.438
(68.26)
2.688
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
5/8 – 11
(74.68)
2.940
4.101 (104.16)
(73.03)
2.875
(68.28)
2.688
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(61.91)
2.438
(68.26)
2.688
(60.45)
2.380
(66.80)
2.630
6.313 (160.34)
6.563 (166.69)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
(28.58)
1.125
3/4 – 10
(79.38)
3.125
4.879 (123.92)
(79.38)
3.125
(82.55)
3.250
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
(71.44)
2.813
(77.79)
3.063
7.063 (179.39)
7.313 (185.74)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
7.500 (190.50)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
(28.58)
1.125
3/4 – 10
(82.55)
3.250
5.730 (145.54)
(82.55)
3.250
(88.90)
3.500
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
(71.44)
2.813
(77.79)
3.063
7.313 (185.74)
7.563 (192.10)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
8.500 (215.90)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
(28.58)
1.125
3/4 – 10
(82.55)
3.250
6.442 (163.63)
(82.55)
3.250
4.500 (114.30)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
(71.44)
2.813
(77.79)
3.063
7.313 (185.74)
7.563 (192.10)
O.S.
D
Std.
O.S.
E
EE
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
MM
Std.
O.S.
ND
NT
P
R
SN
TN
VF
WF
XT
Y
ZB
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Brookville, OH USA
.1"
(25.40)
1.3/8"
(34.93)
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(19.05)
.750
1/2 – 13
(68.33)
2.690
(70.05)
2.758
(66.68)
2.625
(38.10)
1.500
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(61.91)
2.438
(68.26)
2.688
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
Phone 937-833-4033
www.norgren.com
ACT-1-19
Cylinder with 01 (MS4) Sided Tapped
● NFPA (MS4) 01 Side Tapped Mount
for 7" to 12" bore sizes.
● Series A & J Cylinders rated to 250 PSI air,
01
–
–
–
–
A
EA
J
EJ
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TK
Thrust Key
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-20
1
Brookville, OH USA
4
2
3
Phone 937-833-4033
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 01 (MS4) Side Tapped
Series J & EJ, NFPA Steel Air Cylinders with 01 (MS4) Side Tapped
Y
EE NPT (2)
P + Stroke
WF
øB Bushing
øMM
KK
Thds
E
2
A
D
(Flats)
TN
VF
D
Across
Flats
LB + Stroke
ZB + Stroke
øB
CC
Thds.
øB
CC
Thds.
øMM
øMM
A
A
VF
øB
FF
Thds.
øB
KK
Thds.
A Deep
øMM
øMM
øMM
øMM
A
A
C
C
K
SN + Stroke
E Sq.
øB
KK
Thds.
øB
KK
Thds.
J
XT
R
Standard &
Optional Rod Ends
G
C
NT Tap
ND Deep
C
VF
A
C
VF
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
Std.
O.S.
MM
Std.
O.S.
Std.
O.S.
ND
NT
P
R
SN
TN
VF
WF
XT
Y
ZB
13/8 – 12
13/4 – 12
(50.80)
(38.10)
(14.29)
2.000
1.500
.563
LB
1 – 14
11/4 – 12
(130.18)
(34.93)
(44.45)
(28.58)
5.125
1.375
1.750
1.125
3/4 – 10
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
8" Bore (203.20)
1.3/8"
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
3.250
5.730
3.250
3.500
1.000
1.125
1.625
1.875
2.813
3.063
2.813
3.063
7.313
7.563
10" Bore (254.00)
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
.2"
2.000
2.250
2.374
2.624
.750
.875
11/4 – 12
11/2 – 12
(28.58)
(38.10)
(190.50)
(19.05)
1.125
1.500
7.500
.750
Std.
O.S.
G
J
K
KK
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
11/4 – 12
11/2 – 12
O.S.
E
EE
FF
7" Bore (177.80)
1.3/8"
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
(82.55)
(145.54)
(82.55)
(88.90)
(25.40)
(28.58)
(41.28)
(47.63)
(71.44)
(77.79)
(71.44)
(77.79)
(185.74)
(192.10)
Brookville, OH USA
12" Bore (304.80)
.2"
2.1/2"
2.250
3.000
2.624
3.124
.875
1.000
11/2 – 12
13/4 – 12
(28.58)
(38.10)
(215.90)
(19.05)
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
(130.18)
5.125
(34.93)
1.375
(44.45)
1.750
(28.58)
1.125
3/4 – 10
(82.55)
3.250
(163.63)
6.442
(82.55)
3.250
(114.30)
4.500
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
(71.44)
2.813
(77.79)
3.063
(185.74)
7.313
(192.10)
7.563
1.125
1.500
8.500
.750
(44.45)
(50.80)
(50.80)
(57.15)
(60.30)
(66.65)
(19.05)
(22.23)
1.500
1.688
10.625
1.000
2.250
2.000
.688
6.375
1.750
2.000
1.500
4.125
7.969
4.125
5.500
1.125
1.125
1.875
2.000
3.125
3.250
3.125
3.250
8.938
9.063
(38.10)
(42.86)
(269.88)
(25.40)
13/4 – 12
2 – 12
(57.15)
(50.80)
(17.46)
11/4 – 12
11/2 – 12
(161.93)
(44.45)
(50.80)
(38.10)
1–8
(104.78)
(202.41)
(104.78)
(139.70)
(28.58)
(28.58)
(47.63)
(50.80)
(79.38)
(82.55)
(79.38)
(82.55)
(227.01)
(230.19)
Phone 937-833-4033
(50.80)
(63.50)
(57.15)
(76.20)
(66.65)
(79.35)
(22.23)
(25.40)
13/4 – 12
21/4 – 12
1.688
2.063
12.750
1.000
(42.86)
(52.39)
(323.85)
(25.40)
2 – 12
21/2 – 12
2.250
2.000
.688
(57.15)
(50.80)
(17.46)
11/2 – 12
17/8 – 12
(174.63)
6.875
(50.80)
2.000
(63.50)
2.500
(38.10)
1.500
1–8
(117.48)
4.625
(238.92)
9.406
(117.48)
4.625
(184.15)
7.250
(28.58)
1.125
(31.75)
1.250
(50.80)
2.000
(57.15)
2.250
(82.55)
3.250
(88.90)
3.500
(82.55)
3.250
(88.90)
3.500
(242.89)
9.563
(249.24)
9.813
www.norgren.com
ACT-1-21
Cylinder with 03 (MF1) Head Rectangular Flange
● NFPA (MF1) 03 Head Rectangular Flange Mount
03
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-22
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
4
2
3
Phone 937-833-4033
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 03 (MF1) Head Rectangular Flange
Series J & EJ, NFPA Steel Air Cylinders with 03 (MF1) Head Rectangular Flange
FB Holes (4)
Y
øB Bushing
EE NPT(2)
R
P + Stroke
WF
øMM
KK
Thds
E
R
A
D
(Flats)
V
W
TF
Standard &
Optional Rod Ends
øB
KK
Thds.
F
UF
øB
KK
Thds.
D
Across
Flats
A
C
WF
Y
ZB
V
C
C
V
V
Type 2 Solid
Type 3 Female
Type 6 Solid
(Optional)
(Full Thread
Male Optional)
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
P
R
TF
UF
W
C
V
Male Optional)
LB
V
A
Type 2 Studded
G
J
K
MM
øMM
øMM
A
Male Optional)
E
EE
F
FB
KK
F
Type 1 Studded
-.002
FF
øB
FF
Thds.
+.000
D
F
(Small Male)
A
CC
øB
KK
Thds.
A Deep
øMM
øMM
C
V
F
Type 1 Solid
ø Rod
C
K
LB + Stroke
F
øB
CC
Thds.
F
A
C
V
Dimension
B
øB
CC
Thds.
øMM
A
J
ZB + Stroke
F
øMM
G
C
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50)
31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(9.53)
.375
(9.53)
.375
(7.94)
.313
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 –16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
(69.85)
2.750
(85.73)
3.375
(6.35)
.250
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(25.40)
1.000
(34.93)
1.375
(46.74)
1.840
(56.39)
2.220
4.875 (123.83)
5.250 (133.35)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
(9.53)
.375
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 –16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
(85.73)
3.375
4.125 (104.78)
(6.35)
.250
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(25.40)
1.000
(34.93)
1.375
(46.74)
1.840
(56.39)
2.220
4.938 (125.41)
5.313 (134.94)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(50.78)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
(9.53)
.375
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 –16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
(98.43)
3.875
4.625 (117.48)
(6.35)
.250
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(25.40)
1.000
(34.93)
1.375
(46.74)
1.840
(56.39)
2.220
5.063 (128.59)
5.438 (138.11)
.1"
(25.40)
1.3/8"
(34.93)
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
(15.88)
.625
(11.11)
.438
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
4.688 (119.06)
5.500 (139.70)
(6.35)
.250
(9.53)
.375
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(41.27)
1.625
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
(15.88)
.625
(11.11)
.438
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.40)
3.323
5.438 (138.11)
6.250 (158.75)
(6.35)
.250
(9.53)
.375
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(41.27)
1.625
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(60.30)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
(15.88)
.625
(14.29)
.563
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(74.68)
2.940
4.101 (104.16)
6.625 (168.28)
7.625 (193.68)
(6.35)
.250
(9.53)
.375
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(41.27)
1.625
(60.45)
2.380
(66.80)
2.688
6.630 (160.34)
6.563 (166.69)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
(19.05)
.750
(14.29)
.563
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
(79.38)
3.125
4.879 (123.92)
7.625 (193.68)
8.625 (219.08)
(6.35)
.250
(9.53)
.375
(22.23)
.875
(28.58)
1.125
(41.27)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
7.063 (179.39)
7.313 (185.74)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
8.500 (215.90)
(19.05)
.750
–
(17.45)
.687
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
5.125 (130.18)
(34.42)
1.355
(43.94)
1.730
(79.38)
3.250
6.435 (163.44)
–
–
(9.53)
.375
(9.53)
.375
(41.28)
1.625
(47.63)
1.875
–
–
(71.44)
2.813
(77.79)
3.063
7.313 (185.74)
7.625 (193.68)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-23
Series A & EA, NFPA Aluminum Air Cylinders (ø7" & 8")
Series J & EJ, NFPA Steel Air Cylinders (ø7" to 12")
Cylinder with 03 (ME3) Head Square
and Cylinder with 04 (ME4) Cap Square
● NFPA (ME3) 03 Head Square Mount and
NFPA (ME4) 04 Cap Square Mount
for 7" to 12" bore sizes only.
A
EA
J
EJ
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
03
04
–
–
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-24
–
–
Brookville, OH USA
Phone 937-833-4033
1
4
2
3
www.norgren.com
Series A & EA Cylinder with 03 (ME3) Head Square & 04 (ME4) Cap Square
Series J & EJ NFPA Cylinder with 03 (ME3) Head Square & 04 (ME4) Cap Square
03 (ME3)
04 (ME4)
EE NPT (2)
Y
øB Bushing
EB
Holes (4)
Y
P + Stroke
A
D
(Flats)
A
G
C
R
TE
E Sq.
EE NPT (2)
EB
Holes (4)
øMM
KK
Thds
øMM
KK
Thds
E
2
P + Stroke
øB Bushing
J
LB + Stroke
ZB + Stroke
VF
J
G
C
K
R
LB + Stroke
ZJ + Stroke
VF
TE
E
Standard & Optional Rod Ends
øB
KK
Thds.
øB
KK
Thds.
øMM
VF
B
+.000
-.002
C
CC
D
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EB
EE
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
MM
Std.
O.S.
P
R
TE
VF
WF
Y
ZB
ZJ
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
øB
FF
Thds.
øB
KK
Thds.
A Deep
øMM
øMM
C
VF
A
C
VF
øMM
øMM
A
A
C
C
Dimension
Std.
ø Rod
O.S.
Std.
A
O.S.
øMM
A
A
D
Across
Flats
øB
CC
Thds.
øB
CC
Thds.
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
7" Bore (177.80)
1.3/8" (34.93)
1.3/4" (44.45)
1.625 (41.28)
2.000 (50.80)
(50.78)
1.999 Std.
2.374 (60.30)
.625 (15.88)
.750 (19.05)
11/4 – 12
11/2 – 12
1.125 (28.58)
1.500 (38.10)
7.500 (190.50)
.563 (14.29)
.750 (19.05)
13/8 – 12
13/4 – 12
2.000 (50.80)
1.500 (38.10)
.563 (14.29)
1 – 14
11/4 – 12
5.125 (130.18)
1.375 (34.93)
1.750 (44.45)
3.250 (82.55)
5.730 (145.54)
6.750 (171.45)
1.000 (25.40)
1.125 (28.58)
1.625 (41.28)
1.875 (47.63)
2.813 (71.44)
3.063 (77.79)
7.313 (185.74)
7.563 (192.09)
–
–
03 (ME3) Head Square
8" Bore (203.20)
10" Bore (254.00)
1.3/8" (34.93)
1.3/4" (44.45)
(50.80)
1.3/4" (44.45)
.2"
1.625 (41.28)
2.000 (50.80)
2.000 (50.80)
2.250 (57.15)
1.999 (50.78)
2.374 (60.30)
2.374 (60.30)
2.624 (66.65)
.625 (15.88)
.750 (19.05)
.750 (19.05)
.875 (22.23)
11/4 – 12
11/2 – 12
11/2 – 12
13/4 – 12
1.125 (28.58)
1.500 (38.10)
1.500 (38.10)
1.688 (42.86)
8.500 (215.90)
10.625 (269.88)
.688 (17.46)
.813 (20.64)
.750 (19.05)
1.000 (25.40)
13/8 – 12
13/4 – 12
13/4 – 12
2 – 12
2.000 (50.80)
2.250 (57.15)
1.500 (38.10)
2.000 (50.80)
.563 (14.29)
.688 (17.46)
1 – 14
11/4 – 12
11/4 – 12
11/2 – 12
5.125 (130.18)
6.375 (161.93)
1.375 (34.93)
1.750 (44.45)
1.750 (44.45)
2.000 (50.80)
3.250 (82.55)
4.125 (104.78)
6.442 (163.63)
7.969 (202.41)
7.570 (192.27)
9.406 (238.92)
1.000 (25.40)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.625 (41.28)
1.875 (47.63)
1.875 (47.63)
2.000 (50.80)
2.813 (71.44)
3.125 (79.38)
3.063 (77.79)
3.250 (82.55)
7.313 (185.74)
8.938 (227.01)
7.563 (192.09)
9.063 (230.19)
–
–
–
–
12" Bore (304.80)
.2"
(50.80)
(63.50)
2.1/2"
2.250 (57.15)
3.000 (76.20)
2.624 (66.65)
3.124 (79.35)
.875 (22.23)
1.000 (25.40)
13/4 – 12
21/4 – 12
1.688 (42.86)
2.063 (52.39)
12.750 (323.85)
.813 (20.64)
1.000 (25.40)
2 – 12
21/2 – 12
2.250 (57.15)
2.000 (50.80)
.688 (17.46)
11/2 – 12
17/8 – 12
6.875 (174.63)
2.000 (50.80)
2.500 (63.50)
4.625 (117.48)
9.406 (238.92)
11.109 (282.18)
1.125 (28.58)
1.250 (31.75)
2.000 (50.80)
2.250 (57.15)
3.250 (82.55)
3.500 (88.90)
9.563 (242.89)
9.813 (249.24)
–
–
Brookville, OH USA
7" Bore (177.80)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
7.500 (190.50)
(14.29)
.563
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
(82.55)
3.250
5.730 (145.54)
6.750 (171.45)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
–
–
6.750 (171.45)
7.000 (177.80)
Phone 937-833-4033
04 (ME4) Cap Square
8" Bore (203.20)
10" Bore (254.00)
1.3/8"
(34.93)
1.3/4"
(44.45)
(44.45)
(50.80)
1.3/4"
.2"
(41.28)
(50.80)
1.625
2.000
(50.80)
(57.15)
2.000
2.250
(50.78)
(60.30)
1.999
2.374
(60.30)
(66.65)
2.374
2.624
(15.88)
(19.05)
.625
.750
(19.05)
(22.23)
.750
.875
11/4 – 12
11/2 – 12
11/2 – 12
13/4 – 12
(28.58)
(38.10
1.125
1.500
(38.10)
(42.86)
1.500
1.688
8.500 (215.90) 10.625 (269.88)
(17.46)
(20.64)
.688
.813
(19.05)
(25.40)
.750
1.000
13/8 – 12
13/4 – 12
13/4 – 12
2 – 12
(50.80)
(57.15)
2.000
2.250
(38.10)
(50.80)
1.500
2.000
(14.29)
(17.46)
.563
.688
1 – 14
11/4 – 12
11/4 – 12
11/2 – 12
5.125 (130.18)
6.375 (161.93)
(34.93)
(44.45)
1.375
1.750
(44.45)
(50.80)
1.750
2.000
(82.55)
3.250
4.125 (104.78)
6.442 (163.63)
7.969 (202.41)
7.570 (192.27)
9.406 (238.92)
(25.40)
(28.58)
1.000
1.125
(28.58)
(28.58)
1.125
1.125
(41.28)
(47.63)
1.625
1.875
(47.63)
(50.80)
1.875
2.000
(71.44)
(79.38)
2.813
3.125
(77.79)
(82.55)
3.063
3.250
–
–
–
–
6.750 (171.45)
8.250 (209.55)
7.000 (177.80)
8.375 (212.73)
www.norgren.com
12" Bore (304.80)
.2"
(50.80)
(63.50)
2.1/2"
2.250 (57.15)
3.000 (76.20)
2.624 (66.65)
3.124 (79.35)
.875 (22.23)
1.000 (25.40)
13/4 – 12
21/4 – 12
1.688 (42.86)
2.063 (52.39)
12.750 (323.85)
.813 (20.64)
1.000 (25.40)
2 – 12
21/2 – 12
2.250 (57.15)
2.000 (50.80)
.688 (17.46)
11/2 – 12
17/8 – 12
6.875 (174.63)
2.000 (50.80)
2.500 (63.50)
4.625 (117.48)
9.406 (238.92)
11.109 (282.18)
1.125 (28.58)
1.250 (31.75)
2.000 (50.80)
2.250 (57.15)
3.250 (82.55)
3.500 (88.90)
–
–
8.875 (225.43)
9.125 (231.78)
ACT-1-25
Cylinder with 04 (MF2) Cap Rectangular Flange
● NFPA (MF2) 04 Cap Rectangular Flange Mount
04
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-26
–
–
Brookville, OH USA
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard
on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
1
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 04 (MF2) Cap Rectangular Flange
Series J & EJ, NFPA Steel Air Cylinders with 04 (MF2) Cap Rectangular Flange
Y
P + Stroke
FB Holes (4)
EE NPT (2)
WF
øB Bushing
øMM
KK
Thds
E
R
A
G
C
J
F
TF
LB + Stroke
VF
UF
ZF + Stroke
øB
KK
Thds.
øB
KK
Thds.
øMM
øMM
A
A
D
Across
Flats
VF
C
C
VF
VF
VF
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
F
FB
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
MM
Std.
O.S.
P
R
TF
UF
ZF
C
VF
A
Y
A
(Small Male)
ø Rod
WF
øMM
øMM
Type 1 Solid
Dimension
VF
øMM
A
C
VF
øB
FF
Thds.
øB
KK
Thds.
A Deep
øMM
A
C
C
B
øB
CC
Thds.
øB
CC
Thds.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
11/2" Bore (38.10)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.124
(28.55)
1.499
(38.08)
.375
(9.53)
.500
(12.70)
1/2 – 20
7/8 –14
.500
(12.70)
.813
(20.64)
2.000
(50.80)
.375
(9.53)
.375
(9.53)
.313
(7.94)
5/8 – 18
1 – 14
1.500
(38.10)
1.000
(25.40)
.250
(6.35)
7/16 – 20
3/4 – 16
3.625
(92.08)
.625
(15.88)
1.000
(25.40)
2.340
(59.44)
1.428
(36.27)
2.750
(69.85)
3.375
(85.73)
.625
(15.88)
.875
(22.23)
1.000
(25.40)
1.375
(34.93)
1.840
(46.74)
2.220
(56.39)
5.000 (127.00)
5.375 (136.53)
2" Bore (50.80)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.124
(28.55)
1.499
(38.08)
.375
(9.53)
.500
(12.70)
1/2 – 20
7/8 –14
.500
(12.70)
.813
(20.64)
2.500
(63.50)
.375
(9.53)
.375
(9.53)
.375
(9.53)
5/8 – 18
1 – 14
1.500
(38.10)
1.000
(25.40)
.313
(7.94)
7/16 – 20
3/4 – 16
3.625
(92.08)
.625
(15.88)
1.000
(25.40)
2.340
(59.44)
1.838
(46.68)
3.375
(85.73)
4.125 (104.78)
.625
(15.88)
.875
(22.23)
1.000
(25.40)
1.375
(34.93)
1.840
(46.74)
2.220
(56.39)
5.000 (127.00)
5.375 (136.53)
21/2" Bore (63.50)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.124
(28.55)
1.499
(38.08)
.375
(9.53)
.500
(12.70)
1/2 – 20
7/8 –14
.500
(12.70)
.813
(20.64)
3.000
(76.20)
.375
(9.53)
.375
(9.53)
.375
(9.53)
5/8 – 18
1 – 14
1.500
(38.10)
1.000
(25.40)
.313
(7.94)
7/16 – 20
3/4 – 16
3.750
(95.25)
.625
(15.88)
1.000
(25.40)
2.470
(62.74)
2.192
(55.67)
3.875
(98.43)
4.625 (117.48)
.625
(15.88)
.875
(22.23)
1.000
(25.40)
1.375
(34.93)
1.840
(46.74)
2.220
(56.39)
5.125 (130.18)
5.500 (139.70)
Brookville, OH USA
31/4" Bore (82.55)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.499
(38.08)
1.999
(50.78)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.813
(20.64)
1.125
(28.58)
3.750
(95.25)
.500
(12.70)
.625
(15.88)
.438
(11.11)
1 – 14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.375
(9.53)
3/4 – 16
1 – 14
4.250 (107.95)
1.000
(25.40)
1.375
(34.93)
2.690
(68.33)
2.758
(70.05)
4.687 (119.05)
5.500 (139.70)
.875
(22.23)
1.000
(25.40)
1.375
(34.93)
1.625
(41.27)
2.380
(60.45)
2.630
(66.80)
6.250 (158.75)
6.500 (165.10)
4" Bore (101.60)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.499
(38.08)
1.999
(50.78)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.813
(20.64)
1.125
(28.58)
4.500 (114.30)
.500
(12.70)
.625
(15.88)
.438
(11.11)
1 – 14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.375
(9.53)
3/4 – 16
1 – 14
4.250 (107.95)
1.000
(25.40)
1.375
(34.93)
2.690
(68.33)
3.323
(84.40)
5.438 (138.11)
6.250 (158.75)
.875
(22.23)
1.000
(25.40)
1.375
(34.93)
1.625
(41.27)
2.380
(60.45)
2.630
(66.80)
6.250 (158.75)
6.500 (165.10)
Phone 937-833-4033
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.499
(38.08)
1.999
(50.78)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.813
(20.64)
1.125
(28.58)
5.500 (139.70)
.500
(12.70)
.625
(15.88)
.563
(14.29)
1 – 14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.438
(11.11)
3/4 – 16
1 – 14
4.500 (114.30)
1.000
(25.40)
1.375
(34.93)
2.940
(74.68)
4.101 (104.16)
6.625 (168.28)
7.625 (193.68)
.875
(22.23)
1.000
(25.40)
1.375
(34.93)
1.625
(41.27)
2.380
(60.45)
2.630
(66.80)
6.500 (165.10)
6.750 (171.45)
1.3/8"
1.3/8"
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
1.999
(50.78)
2.374
(60.30)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
8.500 (215.90)
.750
(19.05)
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
1.999
(50.78)
2.374
(60.30)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
6.500 (165.10)
.750
(19.05)
.750
(19.05)
.563
(14.29)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.500
(38.10)
.438
(11.11)
1 – 14
11/4 – 12
5.000 (127.00)
1.375
(34.93)
1.750
(44.45)
3.125
(79.38)
4.879 (123.93)
7.625 (193.68)
8.625 (219.08)
1.000
(25.40)
1.125
(28.58)
1.625
(41.27)
1.875
(47.63)
2.813
(71.44)
3.063
(77.79)
7.375 (187.33)
7.625 (193.68)
www.norgren.com
.687
(17.45)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.500
(38.10)
.563
(14.29)
1 – 14
11/4 – 12
5.125 (130.18)
1.355
(34.42)
1.730
(43.94)
3.250
(82.55)
6.435 (163.44)
–
–
1.000
(9.53)
1.000
(9.53)
2.813
3.063
6.750
7.000
(71.44)
(77.79)
(171.45)
(177.80)
ACT-1-27
Cylinder with 05 (MX0) Basic
● NFPA (MX0) 05 Basic Mount,
05
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-28
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard
on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
4
2
3
Phone 937-833-4033
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 05 (MX0) Basic
Series J & EJ, NFPA Steel Air Cylinder with 05 (MX0) Basic
Y
EE NPT (2)
P + Stroke
WF
øB Bushing
øMM
KK
Thds
A
D
(Flats)
G
C
R
J
K
LB + Stroke
VF
ZB + Stroke
E Sq.
øB
KK
Thds.
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
A
øB
CC
Thds.
øMM
A
VF
øMM
øB
FF
Thds.
øMM
A
C
C
øB
KK
Thds.
A Deep
øMM
A
C
VF
A
C
VF
øMM
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
MM
Std.
O.S.
P
R
VF
WF
Y
ZB
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
11/2" Bore (38.10)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
(15.88)
.625
(22.23)
.875
1.000 (25.40)
1.375 (34.93)
(46.74)
1.840
(56.39)
2.220
4.875 (123.83)
5.250 (133.35)
2" Bore (50.80)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(46.74)
1.840
(56.39)
2.220
4.938 (125.41)
5.313 (134.94)
21/2" Bore (63.50) 31/4" Bore (82.55)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(46.74)
1.840
(56.39)
2.220
5.063 (128.59)
5.438 (138.11)
Brookville, OH USA
.1"
(25.40)
1.3/8"
(34.93)
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
4" Bore (101.60)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.40)
3.323
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
Phone 937-833-4033
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (203.
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(74.68)
2.940
4.101 (104.16)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(60.45)
2.380
(66.80)
2.630
6.313 (160.34)
6.563 (166.69)
1.3/8"
1.3/8"
1.3/8"
(34.
(44.
1.3/4"
(41.
1.625
(50.
2.000
(50.
1.999
(60.
2.374
(15.
.625
(19.
.750
11/4 – 12
11/2 – 12
(28.
1.125
(38.
1.500
8.500 (215.
(19.
.750
13/8 – 12
13/4 – 12
(50.
2.000
(38.
1.500
(14.
.563
1 – 14
11/4 – 12
5.125 (130.
(34.
1.375
(44.
1.750
(82.
3.250
6.442 (163.
(25.
1.000
(28.
1.125
(41.
1.625
(47.
1.875
(71.
2.813
(77.
3.063
7.313 (185.
7.563 (192.
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
(79.38)
3.125
4.879 (123.92)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
7.063 (179.39)
7.313 (185.74)
www.norgren.com
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
7.500 (190.50)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
(82.55)
3.250
5.730 (145.54)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
7.313 (185.74)
7.563 (192.10)
ACT-1-29
● NFPA (MX0) 05 Basic Mount,
05
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-30
–
–
Brookville, OH USA
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
1
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 05 (MX0) Basic
Series J & EJ, NFPA Steel Air Cylinders with 05 (MX0) Basic
Y
EE NPT (2)
P + Stroke
WF
øB Bushing
øMM
KK
Thds
A
D
(Flats)
G
C
R
J
K
LB + Stroke
VF
ZB + Stroke
E Sq.
øB
KK
Thds.
øB
KK
Thds.
øMM
D
Across
Flats
øB
CC
Thds.
øB
CC
Thds.
øMM
A
A
øMM
øMM
VF
C
VF
øMM
øMM
A
A
C
C
øB
FF
Thds.
øB
KK
Thds.
A Deep
A
C
VF
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
P
R
VF
WF
Y
ZB
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
1.3/8"
1.3/4"
1.500
1.688
10.625
1.000
13/8 – 12
13/4 – 12
(50.80)
(38.10)
(14.29)
(50.80)
(38.10)
(14.29)
2.000
1.500
.563
1 – 14
11/4 – 12
2.250
2.000
.688
1 – 14
11/4 – 12
(130.18)
(34.93)
(44.45)
(82.55)
(145.54)
(25.40)
(28.58)
(41.28)
(47.63)
(71.44)
(77.79)
(185.74)
(192.09)
5.125
1.375
1.750
3.250
6.442
1.000
1.125
1.625
1.875
2.813
3.063
7.313
7.563
Brookville, OH USA
(44.45)
(50.80)
(50.80)
(57.15)
(60.30)
(66.65)
(19.05)
(22.23)
.2"
2.000
2.250
2.374
2.624
.750
.875
12" Bore (304.80)
(130.18)
(34.93)
(44.45)
(82.55)
(163.63)
(25.40)
(28.58)
(41.28)
(47.63)
(71.44)
(77.79)
(185.74)
(192.09)
6.375
1.750
2.000
4.125
7.969
1.125
1.125
1.875
2.000
3.125
3.250
8.938
9.063
(38.10)
(42.86)
(269.88)
(25.40)
13/4 – 12
2 – 12
(57.15)
(50.80)
(17.46)
11/4 – 12
11/2 – 12
(161.93)
(44.45)
(50.80)
(104.78)
(202.41)
(28.58)
(28.58)
(47.63)
(50.80)
(79.38)
(82.55)
(227.01)
(230.19)
Phone 937-833-4033
14" Bore ()
(50.80)
(63.50)
(57.15)
(76.20)
(66.65)
(79.35)
(22.23)
(25.40)
.2"
2.1/2"
2.250
3.000
2.624
3.124
.875
1.000
11/2 – 12
13/4 – 12
(28.58)
(38.10)
(215.90)
(19.05)
1.125
1.500
8.500
.750
13/8 – 12
13/4 – 12
5.125
1.375
1.750
3.250
5.730
1.000
1.125
1.625
1.875
2.813
3.063
7.313
7.563
10" Bore (254.00)
11/4 – 12
11/2 – 12
(28.58)
(38.10)
(190.50)
(19.05)
1.125
1.500
7.500
.750
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
11/4 – 12
11/2 – 12
Std.
O.S.
Std.
O.S.
8" Bore (203.20)
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
2.000
1.500
.563
LB
MM
1.3/8"
Std.
O.S.
G
J
K
KK
7" Bore (177.80)
13/4 – 12
21/4 – 12
1.688
2.063
12.750
1.000
(42.86)
(52.39)
(323.85)
(25.40)
2 – 12
21/2 – 12
2.250
2.000
.688
(57.15)
(50.80)
(17.46)
11/2 – 12
17/8 – 12
(174.63)
6.875
(50.80)
2.000
(63.50)
2.500
(117.48)
4.625
(238.92)
9.406
(28.58)
1.125
(31.75)
1.250
(50.80)
2.000
(57.15)
2.250
(82.55)
3.250
(88.90)
3.500
(242.89)
9.563
(249.24)
9.813
www.norgren.com
ACT-1-31
Cylinder with 06 (MX1) Both Ends (4)
Tie Rods Extended Shown
● NFPA (MX1) 06 (4) Extended Tie Rods Both Ends Mount
NFPA (MX2) 6C Cap Tie Rods Extended Mount
NFPA (MX3) 6R Head Tie Rods Extended Mount
NFPA (MX4) 6B (2) Extended Tie Rods Both Ends Mount
A
EA
J
EJ
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
06
6B
6C
6R
–
–
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-32
–
–
Brookville, OH USA
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
1
4
3
Phone 937-833-4033
2
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders Combinations with Extended Tie Rods
Series J & EJ, NFPA Steel Air Cylinders Combinations with Extended Tie Rods
Y
06 (MX1)
EE NPT (2)
P + Stroke
WF
øB Bushing
DD
Thds
F
øMM
AA
KK
Thds
A
D
(Flats)
R
G
C
J
LB + Stroke
ZB + Stroke
VF
E Sq.
R
K
BB
BB
BB
6C (MX2)
6R (MX3)
ZB + Stroke
DD
Thds.
BB
DD
Thds.
6B (MX4)
ZB + Stroke
ZB + Stroke
DD
Thds.
BB
øB
KK
Thds.
øB
KK
Thds.
øMM
D
Across
Flats
øMM
A
A
øB
CC
Thds.
øB
CC
Thds.
VF
øMM
øMM
C
VF
A
C
VF
øMM
øMM
A
A
C
C
øB
FF
Thds.
øB
KK
Thds.
A Deep
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
Std.
O.S.
Std.
O.S.
AA
B
+.000
-.002
Std.
O.S.
BB
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
DD
E
EE
F
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
MM
Std.
O.S.
P
R
VF
WF
Y
ZB
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
11/2" Bore (38.10)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(51.31)
2.020
(28.55)
1.124
(38.08)
1.499
(25.40)
1.000
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
1/4 – 28
(50.80)
2.000
(9.53)
.375
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
(15.88)
.625
(22.23)
.875
1.000 (25.40)
1.375 (34.93)
(46.74)
1.840
(56.39)
2.220
4.875 (123.83)
5.250 (133.35)
2" Bore (50.80)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(66.04)
2.600
(28.55)
1.124
(38.08)
1.499
(28.58)
1.125
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 –14
(12.70)
.500
(20.64)
.813
5/16 – 24
(63.50)
2.500
(9.53)
.375
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(46.74)
1.840
(56.39)
2.220
4.938 (125.41)
5.313 (134.94)
21/2" Bore (63.50) 31/4" Bore (82.55)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(78.74)
3.100
(28.55)
1.124
(38.08)
1.499
(28.58)
1.125
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
5/16 – 24
(76.20)
3.000
(9.53)
.375
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(46.74)
1.840
(56.39)
2.220
5.063 (128.59)
5.438 (138.11)
Brookville, OH USA
.1"
(25.40)
1.3/8"
(34.93)
(28.58)
1.125
(41.28)
1.625
(99.06)
3.900
(38.08)
1.499
(50.78)
1.999
(34.93)
1.375
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
3/8 – 24
(95.25)
3.750
(12.70)
.500
(15.88)
.625
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
4" Bore (101.60)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
4.700 (119.38)
(38.08)
1.499
(50.78)
1.999
(34.93)
1.375
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
3/8 – 24
4.500 (114.30)
(12.70)
.500
(15.88)
.625
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.40)
3.323
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
Phone 937-833-4033
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (203
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
5.800 (147.32)
(38.08)
1.499
(50.78)
1.999
(46.04)
1.813
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
1/2 – 20
5.500 (139.70)
(12.70)
.500
(15.88)
.625
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(74.68)
2.940
4.101 (104.16)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(60.45)
2.380
(66.80)
2.630
6.313 (160.34)
6.563 (166.69)
1.3/8"
1.3/8"
1.3/8"
(34
(44
1.3/4"
(41
1.625
(50
2.000
9.100 (231
(50
1.999
(60
2.374
(58
2.313
(15
.625
(19
.750
11/4 – 12
11/2 – 12
(28
1.125
(38
1.500
5/8 – 18
8.500 (215
(19
.750
(19
.750
13/8 – 12
13/4 – 12
(50
2.000
(38
1.500
(14
.563
1 – 14
11/4 – 12
5.125 (130
(34
1.375
(44
1.750
(82
3.250
6.442 (163
(25
1.000
(28
1.125
(41
1.625
(47
1.875
(71
2.813
(77
3.063
7.313 (185
7.563 (192
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
6.900 (175.26)
(50.78)
1.999
(60.30)
2.374
(46.04)
1.813
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
1/2 – 20
6.500 (165.10)
(19.05)
.750
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
(79.38)
3.125
4.879 (123.92)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
7.063 (179.39)
7.313 (185.74)
www.norgren.com
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
8.100 (205.74)
(50.78)
1.999
(60.30)
2.374
(58.74)
2.313
(15.88)
.625
(19.05
.625
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
5/8 – 18
7.500 (190.50)
(19.05)
.750
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
(82.55)
3.250
5.730 (145.54)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
7.313 (185.74)
7.563 (192.10)
ACT-1-33
Cylinder with 06 (MX1) Both Ends (4)
Tie Rods Extended Shown
● NFPA (MX1) 06 (4) Extended Tie Rods Both Ends Mount
NFPA (MX2) 6C Cap Tie Rods Extended Mount
NFPA (MX3) 6R Head Tie Rods Extended Mount
NFPA (MX4) 6B (2) Extended Tie Rods Both Ends Mount
A
EA
J
EJ
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
06
6B
6C
6R
–
–
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-34
–
–
Brookville, OH USA
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
1
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder Combinations with Extended Tie Rods
Series J & EJ, NFPA Steel Air Cylinder Combinations with Extended Tie Rods
Y
06 (MX1)
EE NPT (2)
P + Stroke
WF
øB Bushing
DD
Thds
F
øMM
AA
KK
Thds
A
D
(Flats)
R
G
C
J
LB + Stroke
ZB + Stroke
VF
E Sq.
R
K
BB
BB
6C (MX2)
BB
BB
6R (MX3)
ZB + Stroke
DD
Thds.
6B (MX4)
DD
Thds.
ZB + Stroke
BB
ZB + Stroke
DD
Thds.
øB
KK
Thds.
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
øMM
A
A
øB
CC
Thds.
øMM
VF
øMM
A
C
VF
øB
FF
Thds.
øMM
A
C
C
øB
KK
Thds.
A Deep
øMM
A
C
VF
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
Std.
O.S.
Std.
O.S.
AA
B
+.000
-.002
Std.
O.S.
BB
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
DD
E
EE
F
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
MM
Std.
O.S.
P
R
VF
WF
Y
ZB
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
7" Bore (177.80)
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(205.74)
8.100
(50.78)
1.999
(60.30)
2.374
(58.74)
2.313
(15.88)
.625
(19.05
.625
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
5/8 – 18
(190.50)
7.500
(19.05)
.750
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
(130.18)
5.125
(34.93)
1.375
(44.45)
1.750
(82.55)
3.250
(145.54)
5.730
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
(185.74)
7.313
(192.09)
7.563
8" Bore (203.20)
1.3/8"
1.3/4"
1.625
2.000
9.100
1.999
2.374
2.313
.625
.750
10" Bore (254.00)
(34.93)
(44.45)
(41.28)
(50.80)
(231.14)
(50.78)
(60.30)
(58.74)
(15.88)
(19.05)
1.3/4"
2"
2.000
2.250
11.313
2.374
2.624
2.688
.750
.875
(28.58)
(38.10)
1.500
1.688
(215.90)
(19.05)
(19.05)
10.625
1.000
(50.80)
(38.10)
(14.29)
2.250
2.000
.688
(130.18)
(34.93)
(44.45 )
(82.55)
(163.63)
(25.40)
(28.58)
(41.28)
(47.63)
(71.44)
(77.79)
(185.74)
(192.09)
6.375
1.750
2.000
4.125
7.969
1.125
1.125
1.875
2.000
3.125
3.250
8.938
9.063
11/4 – 12
11/2 – 12
1.125
1.500
5/8 – 18
8.500
.750
.750
13/8 – 12
13/4 – 12
2.000
1.500
.563
1 – 14
11/4 – 12
5.125
1.375
1.750
3.250
6.442
1.000
1.125
1.625
1.875
2.813
3.063
7.313
7.563
Brookville, OH USA
(44.45)
(50.80)
(50.80)
(57.15)
(287.34)
(60.30)
(66.65)
(68.26)
(19.05)
(22.23)
11/2 – 12
13/4 – 12
(38.10)
(42.86)
3/4 – 16
(269.88)
(25.40)
—
13/4 – 12
2 – 12
(57.15)
(50.80)
(17.46)
11/4 – 12
11/2 – 12
(161.93)
(44.45)
(50.80)
(104.78)
(202.41)
(28.58)
(28.58)
(47.63)
(50.80)
(79.38)
(82.55)
(227.01)
(230.19)
Phone 937-833-4033
12" Bore (304.80)
(50.80)
(63.50)
(57.15)
(76.20)
(338.14)
(66.65)
(79.35)
(68.26)
(22.23)
(25.40)
13/4 – 12
21/4 – 12
(42.86)
1.688
(52.39)
2.063
3/4 – 16
(323.85)
12.750
(25.40)
1.000
—
2 – 12
21/2 – 12
(57.15)
2.250
(50.80)
2.000
(17.46)
.688
11/2 – 12
17/8 – 12
(174.63)
6.875
(50.80)
2.000
(63.50)
2.500
(117.48)
4.625
(238.92)
9.406
(28.58)
1.125
(31.75)
1.250
(50.80)
2.000
(57.15)
2.250
(82.55)
3.250
(88.90)
3.500
(242.89)
9.563
(249.24)
9.813
2"
2.1/2"
2.250
3.000
13.313
2.624
3.124
2.688
.875
1.000
www.norgren.com
ACT-1-35
Cylinder with 07 (MT1) Head Trunnion
● NFPA (MT1) 07 Head Trunnion Mount
(See page ACT-1-90 & 91 for ordering information.)
● Head Trunnions are removable.
A
EA
J
EJ
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
07
7R
–
–
Mounting Options
09 Side Lugs (MS2)
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-36
–
–
Brookville, OH USA
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard
on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
1
4
3
NOTES: A Port and a Cushion Adjustment
Port or cushion cannot be located in
position 2 or 4 on the head end.
Phone 937-833-4033
2
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 7R (MT1) Head Trunnion
Series J & EJ, NFPA Steel Air Cylinders with 07 (MT1) Head Trunnion
Y
P + Stroke
EE NPT (2)
WF
øB Bushing
øMM
KK
Thds
øTD
A
D
(Flats)
R
TL
G
C
J
XG
TL
E Sq.
K
LB + Stroke
VF
ZB + Stroke
UT
øB
KK
Thds.
øB
KK
Thds.
øMM
D
Across
Flats
øMM
A
A
øB
CC
Thds.
øB
CC
Thds.
VF
øMM
øMM
C
VF
A
C
VF
øMM
øMM
A
A
C
C
øB
FF
Thds.
øB
KK
Thds.
A Deep
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
Std.
ø Rod
O.S.
Std.
A
O.S.
+.000 Std.
B
-.002 O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
EE
Std.
FF
O.S.
G
J
K
Std.
KK
O.S.
LB
Std.
MM
O.S.
P
R
TD +.000 -.001
TL
UT
Std.
VF
O.S.
Std.
WF
O.S.
Std.
XG
O.S.
Std.
Y
O.S.
Std.
ZB
O.S.
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
(25.40)
1.000
(25.40)
1.000
4.000 (101.60)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(53.98)
2.125
(46.74)
1.840
(56.39)
2.220
4.875 (123.83)
5.250 (133.35)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
(25.40)
1.000
(25.40)
1.000
4.500 (114.30)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(53.98)
2.125
(46.74)
1.840
(56.39)
2.220
4.938 (125.41)
5.313 (134.94)
21/2" Bore (63.50) 31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
(25.40)
1.000
(25.40)
1.000
5.000 (127.00)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(53.98)
2.125
(46.74)
1.840
(56.39)
2.220
5.063 (128.59)
5.438 (138.11)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.40)
3.323
(25.40)
1.000
(25.40)
1.000
6.500 (165.10)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(57.15)
2.250
(63.50)
2.500
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(74.68)
2.940
4.101 (104.16)
(25.40)
1.000
(25.40)
1.000
7.500 (190.50)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(57.15)
2.250
(63.50)
2.500
(60.45)
2.380
(66.80)
2.630
6.313 (160.34)
6.563 (166.69)
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
(79.38)
3.125
4.879 (123.92)
(34.93)
1.375
(34.93)
1.375
9.250 (234.95)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(66.68)
2.625
(73.03)
2.875
(71.44)
2.813
(77.79)
3.063
7.063 (179.39)
7.313 (185.74)
Brookville, OH USA
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
(25.40)
1.000
(25.40)
1.000
5.750 (146.05)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(57.15)
2.250
(63.50)
2.500
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
Phone 937-833-4033
www.norgren.com
7" Bore (177.80)
8" Bore (20
(34.93) 1.3/8"
(3
1.3/8"
(44.45) 1.3/4"
(4
1.3/4"
(41.28) 1.625
(4
1.625
(50.80) 2.000
(5
2.000
(50.78) 1.999
(5
1.999
(60.30) 2.374
(6
2.374
(15.88)
(1
.625
.625
(19.05)
(1
.750
.750
11/4 – 12
11/4 – 1
11/2 – 12
11/2 – 1
(28.58) 1.125
(2
1.125
(38.10) 1.500
(3
1.500
7.500 (190.50) 8.500 (21
(19.05)
(1
.750
.750
13/8 – 12
13/8 – 1
13/4 – 12
13/4 – 1
(50.80) 2.000
(5
2.000
(38.10) 1.500
(3
1.500
(14.29)
(1
.563
.563
1 – 14
1 – 14
11/4 – 12
11/4 – 1
5.125 (130.18) 5.125 (13
(34.93) 1.375
(3
1.375
(44.45) 1.750
(4
1.750
(82.55) 3.250
(8
3.250
5.730 (145.54) 6.435 (16
(34.93) 1.375
(3
1.375
(34.93) 1.375
(3
1.375
10.250 (260.35) 11.250 (28
(25.40) 1.000
(2
1.000
(28.58) 1.125
(2
1.125
(41.28) 1.625
(4
1.625
(47.63) 1.875
(4
1.875
(66.68) 2.625
(6
2.625
(73.03) 2.875
(7
2.875
(71.44) 2.813
(7
2.813
(77.79) 3.063
(7
3.063
7.313 (185.74) 7.313 (18
7.563 (192.10) 7.563 (19
ACT-1-37
Cylinder with 07 (MT1) Heaad Trunnion
● NFPA (MT1) 7R & 07 Head Trunnion Mount
● Head Trunnions are removable.
A
EA
J
EJ
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
07
7R
–
–
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
08 Cap Trunnion (MT2) - J & EJ
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-38
–
–
Brookville, OH USA
1
4
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard
on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
2
3
position 2 or 4 on the head end.
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 7R (MT1) Head Trunnion
Series J & EJ, NFPA Steel Air Cylinder with 07 (MT1) Head Trunnion
Y
P + Stroke
EE NPT (2)
WF
øB Bushing
øMM
KK
Thds
øTD
A
D
(Flats)
R
TL
G
C
J
VF
XG
TL
E Sq.
K
LB + Stroke
ZB + Stroke
UT
øB
KK
Thds.
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
A
øB
CC
Thds.
øMM
A
øMM
A
C
C
VF
øB
KK
Thds.
A Deep
øMM
øMM
øMM
A
C
VF
øB
FF
Thds.
A
C
VF
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
P
R
TD
TL
UT
VF
WF
XG
Y
ZB
+.000 -.001
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
10" Bore (254.00)
1.3/4"
2."
2.000
2.250
2.374
2.624
.750
.875
(50.80)
(38.10)
(14.29)
(28.58)
(38.10)
(215.90)
(19.05)
(50.80)
(38.10)
(14.29)
2.000
1.500
.563
1.500
1.688
10.625
1.000
2.250
2.000
.688
1 – 14
11/4 – 12
(130.18)
(34.93)
(44.45)
(82.55)
(145.54)
(34.93)
(34.93)
(260.35)
(25.40)
(28.58)
(41.28)
(47.63)
(66.68)
(73.03)
(71.44)
(77.79)
(185.74)
(192.09)
5.125
1.375
1.750
3.250
6.435
1.375
1.375
11.250
1.000
1.125
1.625
1.875
2.625
2.875
2.813
3.063
7.313
7.563
Brookville, OH USA
12" Bore (304.80)
(44.45)
(50.80)
(50.80)
(57.15)
(60.30)
(66.65)
(19.05)
(22.23)
(130.18)
(34.93)
(44.45)
(82.55)
(163.44)
(34.93)
(34.93)
(285.75)
(25.40)
(28.58)
(41.28)
(47.63)
(66.68)
(73.03)
(71.44)
(77.79)
(185.74)
(192.09)
6.375
1.750
2.000
4.125
7.969
1.750
1.750
14.125
1.125
1.125
1.875
2.000
3.000
3.125
3.125
3.250
8.938
9.063
Phone 937-833-4033
(50.80)
(63.50)
(57.15)
(76.20)
(66.65)
(79.35)
(22.23)
(25.40)
2."
2.1/2"
2.250
3.000
2.624
3.124
.875
1.000
11/2 – 12
13/4 – 12
13/8 – 12
13/4 – 12
1 – 14
11/4 – 12
5.125
1.375
1.750
3.250
5.730
1.375
1.375
10.250
1.000
1.125
1.625
1.875
2.625
2.875
2.813
3.063
7.313
7.563
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
1.125
1.500
8.500
.75
13/8 – 12
13/4 – 12
Std.
O.S.
Std.
O.S.
8" Bore (203.20)
1.3/8"
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
11/4 – 12
11/2 – 12
(28.58)
(38.10)
(190.50)
(19.05)
1.125
1.500
7.500
.750
2.000
1.500
.563
LB
MM
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
11/4 – 12
11/2 – 12
Std.
O.S.
G
J
K
KK
7" Bore (177.80)
1.3/8"
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
13/4 – 12
21/4 – 12
(38.10)
(42.86)
(269.88)
(25.40)
13/4 – 12
2 – 12
(57.15)
(50.80)
(17.46)
11/4 – 12
11/2 – 12
(161.93)
(44.45)
(50.80)
(104.78)
(202.41)
(44.45)
(44.45)
(358.78)
(28.58)
(28.58)
(47.63)
(50.80)
(76.20)
(79.38)
(79.38)
(82.55)
(227.01)
(230.19)
(42.86)
(52.39)
(323.85)
(25.40)
1.688
2.063
12.750
1.000
2 – 12
21/2 – 12
2.250
2.000
.688
(57.15)
(50.80)
(17.46)
11/2 – 12
17/8 – 12
(174.63)
6.875
(50.80)
2.000
(63.50)
2.500
(117.48)
4.625
(238.92)
9.406
(44.45)
1.750
(44.45)
1.750
(412.75)
16.250
(28.58)
1.125
(31.75)
1.250
(50.80)
2.000
(57.15)
2.250
(79.38)
3.125
(85.73)
3.375
(82.55)
3.250
(88.90)
3.500
(242.89)
9.563
(249.24)
9.813
www.norgren.com
ACT-1-39
Cylinder with 08 (MT2) Cap Trunnion
● NFPA (MT2) 8R & 08 Cap Trunnion Mount
● Cap Trunnions are removable.
A
EA
J
EJ
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
08
8R
–
–
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
8R Removable Cap Trunion (MT2) - A & EA
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-40
–
–
Brookville, OH USA
1
4
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
2
3
NOTEA: A Port and a Cushion Adjustment
position 2 or 4 on the cap end.
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 8R (MT2) Cap Trunnion
Series J & EJ, NFPA Steel Air Cylinders with 08 (MT2) Cap Trunnion
Y
P + Stroke
EE NPT (2)
WF
øB Bushing
øMM
KK
Thds
øTD
A
G
C
J
VF
R
K
LB + Stroke
E Sq.
XJ + Stroke
UT
TL
ZB + Stroke
øB
KK
Thds.
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
A
øB
CC
Thds.
øMM
A
øMM
A
C
C
VF
øB
KK
Thds.
A Deep
øB
FF
Thds.
øMM
øMM
øMM
A
C
VF
A
C
VF
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
MM
P
R
TD +.000
TL
UT
VF
WF
XJ
Y
ZB
Std.
O.S.
-.001
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
11/2" Bore (38.10)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
(25.40)
1.000
(25.40)
1.000
4.000 (101.60)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
4.125 (104.78)
4.500 (114.30)
(46.74)
1.840
(56.39)
2.220
4.875 (123.83)
5.250 (133.35)
2" Bore (50.80)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
(25.40)
1.000
(25.40)
1.000
4.500 (114.30)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
4.125 (104.78)
4.500 (114.30)
(46.74)
1.840
(56.39)
2.220
4.938 (125.41)
5.313 (134.94)
21/2" Bore (63.50) 31/4" Bore (82.55)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
(25.40)
1.000
(25.40)
1.000
5.000 (127.00)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
4.250 (107.95)
4.625 (117.48)
(46.74)
1.840
(56.39)
2.220
5.063 (128.59)
5.438 (138.11)
Brookville, OH USA
.1"
(25.40)
1.3/8"
(34.93)
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
(25.40)
1.000
(25.40)
1.000
5.750 (146.05)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
5.000 (127.00)
5.250 (133.35)
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
4" Bore (101.60)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.40)
3.323
(25.40)
1.000
(25.40)
1.000
6.500 (165.10)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
5.000 (127.00)
5.250 (133.35)
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
Phone 937-833-4033
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(74.68)
2.940
4.101 (104.16)
(25.40)
1.000
(25.40)
1.000
7.500 (190.50)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
5.250 (133.35)
5.500 (139.70)
(60.45)
2.380
(66.80)
2.630
6.313 (160.34)
6.563 (166.69)
1.3/8"
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
(79.38)
3.125
4.879 (123.92)
(34.93)
1.375
(34.93)
1.375
9.250 (234.95)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
5.875 (149.23)
6.125 (155.58)
(71.44)
2.813
(77.79)
3.063
7.063 (179.39)
7.313 (185.74)
www.norgren.com
8" Bore (2
(34.93) 1.3/8"
(
(44.45) 1.3/4"
(
1.3/4"
(41.28) 1.625
(
1.625
(50.80) 2.000
(
2.000
(50.78) 1.999
(
1.999
(60.30) 2.374
(
2.374
(15.88)
(
.625
.625
(19.05)
(
.750
.750
11/4 – 12
11/4 –
11/2 – 12
11/2 –
(28.58) 1.125
(
1.125
(38.10) 1.500
(
1.500
7.500 (190.50) 8.500 (2
(19.05)
(
.750
.750
13/8 – 12
13/8 –
13/4 – 12
13/4 –
(50.80) 2.000
(
2.000
(38.10) 1.500
(
1.500
(14.29)
(
.563
.563
1 – 14
1–1
11/4 – 12
11/4 –
5.125 (130.18) 5.125 (1
(34.93) 1.375
(
1.375
(44.45) 1.750
(
1.750
(82.55) 3.250
(
3.250
5.730 (145.54) 6.435 (1
(34.93) 1.375
(
1.375
(34.93) 1.375
(
1.375
10.250 (260.35) 11.250 (2
(25.40) 1.000
(
1.000
(28.58) 1.125
(
1.125
(41.28) 1.625
(
1.625
(47.63) 1.875
(
1.875
6.000 (152.40) 6.000 (1
6.250 (158.75) 6.250 (1
(71.44) 2.813
(
2.813
(77.79) 3.063
(
3.063
7.313 (185.74) 7.313 (1
7.563 (192.10) 7.563 (1
ACT-1-41
Cylinder with 08 (MT2) Cap Trunnion
● NFPA (MT2) 8R & 08 Cap Trunnion Mount
● Cap Trunnions are removable.
A
EA
J
EJ
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
08
8R
–
–
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
8R Removable Cap Trunion (MT2) - A & EA
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-42
–
–
Brookville, OH USA
1
4
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
2
3
position 2 or 4 on the cap end.
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 8R (MT2) Cap Trunnion
Series J & EJ, NFPA Steel Air Cylinders with 08 (MT2) Cap Trunnion
Y
P + Stroke
EE NPT (2)
WF
øB Bushing
øMM
KK
Thds
øTD
A
G
C
J
VF
R
K
LB + Stroke
E Sq.
XJ + Stroke
UT
TL
ZB + Stroke
øB
KK
Thds.
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
øB
CC
Thds.
øMM
A
A
øMM
A
C
C
VF
øB
KK
Thds.
A Deep
øB
FF
Thds.
øMM
øMM
øMM
A
C
VF
A
C
VF
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
P
R
TD +.000
TL
UT
VF
WF
XJ
Y
ZB
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
-.001
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
1.3/4"
1.500
1.688
10.625
1.000
13/8 – 12
13/4 – 12
(50.80)
(38.10)
(14.29)
(50.80)
(38.10)
(14.29)
2.000
1.500
.563
1 – 14
11/4 – 12
2.250
2.000
.688
1 – 14
11/4 – 12
(130.18)
(34.93)
(44.45)
(82.55)
(145.54)
(34.93)
(34.93)
(260.35)
(25.40)
(28.58)
(41.28)
(47.63)
(152.40)
(158.75)
(71.44)
(77.79)
(185.74)
(192.09)
5.125
1.375
1.750
3.250
6.435
1.375
1.375
11.250
1.000
1.125
1.625
1.875
6.000
6.250
2.813
3.063
7.313
7.563
Brookville, OH USA
(44.45)
(50.80)
(50.80)
(57.15)
(60.30)
(66.65)
(19.05)
(22.23)
2."
2.000
2.250
2.374
2.624
.750
.875
12" Bore (304.80)
2."
2.1/2"
2.250
3.000
2.624
3.124
.875
1.000
11/2 – 12
13/4 – 12
(28.58)
(38.10)
(215.90)
(19.05)
1.125
1.500
8.500
.750
13/8 – 12
13/4 – 12
5.125
1.375
1.750
3.250
5.730
1.375
1.375
10.250
1.000
1.125
1.625
1.875
6.000
6.250
2.813
3.063
7.313
7.563
10" Bore (254.00)
11/4 – 12
11/2 – 12
(28.58)
(38.10)
(190.50)
(19.05)
1.125
1.500
7.500
.750
Std.
O.S.
Std.
O.S.
8" Bore (203.20)
1.3/8"
11/4 – 12
11/2 – 12
2.000
1.500
.563
LB
MM
1.3/8"
Std.
O.S.
G
J
K
KK
7" Bore (177.80)
(130.18)
(34.93)
(44.45)
(82.55)
(163.44)
(34.93)
(34.93)
(285.75)
(25.40)
(28.58)
(41.28)
(47.63)
(152.40)
(158.75)
(71.44)
(77.79)
(185.74)
(192.09)
6.375
1.750
2.000
4.125
7.969
1.750
1.750
14.125
1.125
1.125
1.875
2.000
7.250
7.375
3.125
3.250
8.938
9.063
(38.10)
(42.86)
(269.88)
(25.40)
13/4 – 12
2 – 12
(57.15)
(50.80)
(17.46)
11/4 – 12
11/2 – 12
(161.93)
(44.45)
(50.80)
(104.78)
(202.41)
(44.45)
(44.45)
(358.78)
(28.58)
(28.58)
(47.63)
(50.80)
(184.15)
(187.33)
(79.38)
(82.55)
(227.01)
(230.19)
Phone 937-833-4033
(50.80)
(63.50)
(57.15)
(76.20)
(66.65)
(79.35)
(22.23)
(25.40)
13/4 – 12
21/4 – 12
1.688
2.063
12.750
1.000
(42.86)
(52.39)
(323.85)
(25.40)
2 – 12
21/2 – 12
2.250
2.000
.688
(57.15)
(50.80)
(17.46)
11/2 – 12
17/8 – 12
(174.63)
6.875
(50.80)
2.000
(63.50)
2.500
(117.48)
4.625
(238.92)
9.406
(44.45)
1.750
(44.45)
1.750
(412.75)
16.250
(28.58)
1.125
(31.75)
1.250
(50.80)
2.000
(57.15)
2.250
(200.03)
7.875
(206.38)
8.125
(82.55)
3.250
(88.90)
3.500
(242.89)
9.563
(249.24)
9.813
www.norgren.com
ACT-1-43
Cylinder with 09 (MS2) Side Lug
● NFPA (MS2) 09 Side Lug Mount
09
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TK
Thrust Key
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-44
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 09 (MS2) Side Lugs
Series J & EJ, NFPA Steel Air Cylinders with 09 (MS2) Side Lugs
EE NPT (2)
E Sq.
R
Y
P + Stroke
WF
øB Bushing
øMM
KK
Thds
øSB
E
2
SH
A
ST
D
(Flats)
TS
US
Standard &
Optional Rod Ends
øB
KK
Thds.
øB
KK
Thds.
D
Across
Flats
VF
K
SW
øB
KK
Thds.
A Deep
øMM
øB
FF
Thds.
øMM
A
C
VF
LB + Stroke
SS + Stroke
ZB + Stroke
øB
CC
Thds.
øMM
A
C
SW
J
SJ
SU
XS
øB
CC
Thds.
øMM
A
G
C
øMM
A
C
VF
C
VF
øMM
A
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
Std.
ø Rod
O.S.
Std.
A
O.S.
+.000 Std.
B
-.002 O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
EE
Std.
FF
O.S.
G
J
K
Std.
KK
O.S.
LB
Std.
MM
O.S.
P
R
SB
SH
SJ
SS
ST
SU
SW
TS
US
Std.
VF
O.S.
Std.
WF
O.S.
Std.
XS
O.S.
Std.
Y
O.S.
Std.
ZB
O.S.
11/2" Bore (38.10)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
(11.11)
.438
(25.40)
1.000
(15.88)
.625
(73.03)
2.875
(12.70)
.500
(28.58)
1.125
(9.53)
.375
(69.85)
2.750
(88.90)
3.500
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(34.93)
1.375
(44.45)
1.750
(46.74)
1.840
(56.39)
2.220
4.875 (123.83)
5.250 (133.35)
2" Bore (50.80)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
(11.11)
.438
(31.75)
1.250
(15.88)
.625
(73.03)
2.875
(12.70)
.500
(28.58)
1.125
(9.53)
.375
(82.55)
3.250
4.000 (101.60)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(34.93)
1.375
(44.45)
1.750
(46.74)
1.840
(56.39)
2.220
4.938 (125.41)
5.313 (134.94)
21/2" Bore (63.50) 31/4" Bore (82.55)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
(11.11)
.438
(38.10)
1.500
(15.88)
.625
(76.20)
3.000
(12.70)
.500
(28.58)
1.125
(9.53)
.375
(95.25)
3.750
4.500 (114.30)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(34.93)
1.375
(44.45)
1.750
(46.74)
1.840
(56.39)
2.220
5.063 (128.59)
5.438 (138.11)
Brookville, OH USA
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
(14.29)
.563
(47.63)
1.875
(19.05)
.750
(82.55)
3.250
(19.05)
.750
(31.75)
1.250
(12.70)
.500
4.750 (120.65)
5.750 (146.05)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(47.63)
1.875
(53.98)
2.125
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
4" Bore (101.60)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.40)
3.323
(14.29)
.563
(57.15)
2.250
(19.05)
.750
(82.55)
3.250
(19.05)
.750
(31.75)
1.250
(12.70)
.500
5.500 (139.70)
6.500 (165.10)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(47.63)
1.875
(53.98)
2.125
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
Phone 937-833-4033
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(74.68)
2.940
4.101 (104.16)
(20.64)
.813
(69.85)
2.750
(20.64)
.813
(79.38)
3.125
(25.40)
1.000
(26.99)
1.063
(17.46)
.688
6.875 (174.63)
8.250 (209.55)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(52.37)
2.062
(58.74)
2.313
(60.45)
2.380
(66.80)
2.630
6.313 (160.34)
6.563 (166.69)
1.3/8"
1.3/8"
8" Bore (203
(34.93)
(34.93) 1.3/8"
(3
(44.45) 1.3/4"
(44.45) 1.3/4"
(4
1.3/4"
(41.28) 1.625
(41.28) 1.625
(4
1.625
(50.80) 2.000
(50.80) 2.000
(5
2.000
(50.78)
(50.78) 1.999
(5
1.999
1.999
(60.30)
(60.30) 2.374
(6
2.374
2.374
(15.88)
(15.88)
(1
.625
.625
.625
(19.05)
(19.05)
(1
.750
.750
.750
11/4 – 12
11/4 – 12
11/4 – 1
11/2 – 12
11/2 – 12
11/2 – 1
(28.58) 1.125
(28.58) 1.125
(2
1.125
(38.10) 1.500
(38.10) 1.500
(3
1.500
6.500 (165.10) 7.500 (190.50) 8.500 (21
(19.05)
(19.05)
(1
.750
.750
.750
13/8 – 12
13/8 – 12
13/8 – 1
13/4 – 12
13/4 – 12
13/4 – 1
(50.80) 2.000
(50.80) 2.000
(5
2.000
(38.10) 1.500
(38.10) 1.500
(3
1.500
(11.11)
(14.29)
(1
.438
.563
.563
1 – 14
1 – 14
1 – 14
11/4 – 12
11/4 – 12
11/4 – 1
5.000 (127.00) 5.125 (130.18) 5.125 (13
(34.93) 1.375
(34.93) 1.375
(3
1.375
(44.45) 1.750
(44.45) 1.750
(4
1.750
(79.38) 3.250
(82.55) 3.250
(8
3.125
4.879 (123.92) 5.730 (145.54) 6.442 (16
(20.64)
(20.64)
(2
.813
.813
.813
(82.55) 3.750
(95.25) 4.250 (10
3.250
(20.64)
(20.64)
(2
.813
.813
.813
(92.08) 3.750
(95.25) 3.750
(9
3.625
(25.40) 1.000
(25.40) 1.000
(2
1.000
(33.34) 1.313
(33.34) 1.313
(3
1.313
(17.46)
(17.46)
(1
.688
.688
.688
7.875 (200.03) 8.875 (225.43) 9.875 (25
9.250 (234.95) 10.250 (260.35) 11.250 (28
(25.40) 1.000
(25.40) 1.000
(2
1.000
(28.58) 1.125
(28.58) 1.125
(2
1.125
(41.28) 1.625
(41.28) 1.625
(4
1.625
(47.63) 1.875
(47.63) 1.875
(4
1.875
(58.74) 2.313
(58.74) 2.313
(5
2.313
(65.07) 2.562
(65.07) 2.562
(6
2.562
(71.44) 2.813
(71.44) 2.813
(7
2.813
(77.79) 3.063
(77.79) 3.063
(7
3.063
7.063 (179.39) 7.313 (185.74) 7.313 (18
7.313 (185.74) 7.563 (192.10) 7.563 (19
www.norgren.com
ACT-1-45
Cylinder with 09 (MS2) Side Lug
● NFPA (MS2) 09 Side Lug Mount
09
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TK
Thrust Key
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-46
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
3
C** 1 /8"
Standard on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 09 (MS2) Side Lugs
Series J & EJ, NFPA Steel Air Cylinders with 09 (MS2) Side Lugs
EE NPT (2)
E Sq.
R
Y
P + Stroke
WF
øB Bushing
øMM
KK
Thds
øSB
E
2
SH
A
ST
D
(Flats)
TS
US
Standard &
Optional Rod Ends
øB
KK
Thds.
VF
A
VF
LB + Stroke
SS + Stroke
ZB + Stroke
K
SW
øB
FF
Thds.
øB
KK
Thds.
A Deep
øMM
øMM
øMM
øMM
A
A
C
C
J
SJ
SU
øB
CC
Thds.
øB
CC
Thds.
øMM
A
SW
XS
øB
KK
Thds.
øMM
D
Across
Flats
G
C
C
VF
A
C
VF
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
Std.
O.S.
WF
XS
Y
ZB
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
8" Bore (203.20)
1.3/8"
1.500
1.688
10.625
1.000
13/8 – 12
13/4 – 12
(50.80)
(38.10)
(14.29)
(50.80)
(38.10)
(14.29)
2.000
1.500
.563
1 – 14
11/4 – 12
2.250
2.000
.688
1 – 14
11/4 – 12
(130.18)
(34.93)
(44.45)
(82.55)
(145.54)
(20.64)
(95.25)
(20.64)
(95.25)
(25.40)
(39.69)
(17.46)
(225.43)
(260.35)
(25.40)
(28.58)
(41.28)
(47.63)
(58.74)
(65.09)
(71.44)
(77.79)
(185.74)
(192.09)
5.125
1.375
1.750
3.250
6.442
.813
4.250
.813
3.750
1.000
1.563
.688
9.875
11.250
1.000
1.125
1.625
1.875
2.313
2.563
2.813
3.063
7.313
7.563
Brookville, OH USA
(44.45)
(50.80)
(50.80)
(57.15)
(60.30)
(66.65)
(19.05)
(22.23)
2."
2.000
2.250
2.374
2.624
.750
.875
12" Bore (304.80)
(130.18)
(34.93)
(44.45)
(82.55)
(163.63)
(20.64)
(107.95)
(20.64)
(95.25)
(25.40)
(39.69)
(17.46)
(250.83)
(285.75)
(25.40)
(28.58)
(41.28)
(47.63)
(58.74)
(65.09)
(71.44)
(77.79)
(185.74)
(192.09)
6.375
1.750
2.000
4.125
7.969
1.063
5.313
2.000
4.625
1.250
2.000
.875
12.375
14.125
1.125
1.125
1.875
2.000
2.750
2.875
3.125
3.250
8.938
9.063
(38.10)
(42.86)
(269.88)
(25.40)
13/4 – 12
2 – 12
(57.15)
(50.80)
(17.46)
11/4 – 12
11/2 – 12
(161.93)
(44.45)
(50.80)
(104.78)
(202.41)
(26.99)
(134.94)
(50.80)
(117.48)
(31.75)
(50.80)
(22.23)
(314.33)
(358.78)
(28.58)
(28.58)
(47.63)
(50.80)
(69.85)
(73.03)
(79.38)
(82.55)
(227.01)
(230.19)
Phone 937-833-4033
(50.80)
(63.50)
(57.15)
(76.20)
(66.65)
(79.35)
(22.23)
(25.40)
2."
2.1/2"
2.250
3.000
2.624
3.124
.875
1.000
11/2 – 12
13/4 – 12
(28.58)
(38.10)
(215.90)
(19.05)
1.125
1.500
8.500
.750
13/8 – 12
13/4 – 12
5.125
1.375
1.750
3.250
5.730
.813
3.750
.813
3.750
1.000
1.563
.688
8.875
10.250
1.000
1.125
1.625
1.875
2.313
2.563
2.813
3.063
7.313
7.563
1.3/4"
11/4 – 12
11/2 – 12
(28.58)
(38.10)
(190.50)
(19.05)
1.125
1.500
7.500
.750
10" Bore (254.00)
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
11/4 – 12
11/2 – 12
Std.
O.S.
P
R
SB
SH
SJ
SS
ST
SU
SW
TS
US
VF
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
2.000
1.500
.563
LB
MM
1.3/8"
Std.
O.S.
G
J
K
KK
7" Bore (177.80)
13/4 – 12
21/4 – 12
1.688
2.063
12.750
1.000
(42.86)
(52.39)
(323.85)
(25.40)
2 – 12
21/2 – 12
2.250
2.000
.688
(57.15)
(50.80)
(17.46)
11/2 – 12
17/8 – 12
(174.63)
6.875
(50.80)
2.000
(63.50)
2.500
(117.48)
4.625
(238.92)
9.406
(26.99)
1.063
(161.93)
6.375
(50.80)
2.000
(130.18)
5.125
(31.75)
1.250
(50.80)
2.000
(22.23)
.875
(368.30)
14.500
(412.75)
16.250
(28.58)
1.125
(31.75)
1.250
(50.80)
2.000
(57.15)
2.250
(73.03)
2.875
(79.38)
3.125
(82.55)
3.250
(88.90)
3.500
(242.89)
9.563
(249.24)
9.813
www.norgren.com
ACT-1-47
Cylinder with 10 (MT4) Center Trunnion
● NFPA(MT4) 10 Center Trunnion Mount
10
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-48
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder 10 (MT4) with Center Trunnion
Series J & EJ, NFPA Steel Air Cylinder 10 (MT4) with Center Trunnion
EE NPT (2)
E Sq.
Y
R
P + Stroke
WF
øB Bushing
øMM
KK
Thds
UV
øTD
A
D
(Flats)
TM
TL
Standard &
Optional Rod Ends
øB
KK
Thds.
J
BD
K
XI (Min.)
LB + Stroke
VF
ZB + Stroke
øB
KK
Thds.
A
Customer
Must Specify
XI
TL
UM
øB
CC
Thds.
øMM
D
Across
Flats
G
C
øB
CC
Thds.
øMM
A
øMM
A
C
C
VF
øB
KK
Thds.
A Deep
øB
FF
Thds.
øMM
øMM
øMM
A
C
VF
A
C
VF
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
Std.
O.S.
Std.
O.S.
Std.
O.S.
BD
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
MM
P
R
TD +.000
TL
TM
UM
UV
Std.
O.S.
-.001
Std.
O.S.
Std.
WF
O.S.
Std.
XI min.
O.S.
Std.
Y
O.S.
Std.
ZB
O.S.
VF
11/2" Bore (38.10)
2" Bore (50.80)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(31.75)
1.250
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
(25.40)
1.000
(25.40)
1.000
(63.50)
2.500
4.500 (114.30)
(63.50)
2.500
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(79.38)
3.125
(88.90)
3.500
(46.74)
1.840
(56.39)
2.220
4.875 (123.83)
5.250 (133.35)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(38.10)
1.500
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
(25.40)
1.000
(25.40)
1.000
(76.20)
3.000
5.000 (127.00)
(76.20)
3.000
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(82.55)
3.250
(92.08)
3.625
(46.74)
1.840
(56.39)
2.220
4.938 (125.41)
5.313 (134.94)
21/2" Bore (63.50) 31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(38.10)
1.500
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
(25.40)
1.000
(25.40)
1.000
(88.90)
3.500
5.500 (139.70)
(88.90)
3.500
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(82.55)
3.250
(92.08)
3.625
(46.74)
1.840
(56.39)
2.220
5.063 (128.59)
5.438 (138.11)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.83)
3.323
(25.40)
1.000
(25.40)
1.000
5.250 (133.35)
7.250 (184.15)
5.000 (127.00)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
4.125 (104.78)
4.375 (111.13)
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
.1"
(25.40) 1.3/8"
(34.93)
(34.93) 1.3/4"
(44.45)
1.3/8"
(28.58) 1.625
(41.28)
1.125
(41.28) 2.000
(50.80)
1.625
(38.08) 1.999
(50.78)
1.499
(50.78) 2.374
(60.30)
1.999
(50.80) 2.500
(63.50)
2.000
(12.70)
(15.88)
.500
.625
(15.88)
(19.05)
.625
.750
7/8 – 14
11/4 – 12
11/4 – 12
11/2 – 12
(20.64) 1.125
(28.58)
.813
(28.58) 1.500
(38.10)
1.125
5.500 (139.70) 6.500 (165.10)
(12.70)
(19.05)
.500
.750
1 – 14
13/8 – 12
13/8 – 12
13/4 – 12
(44.45) 2.000
(50.80)
1.750
(31.75) 1.500
(38.10)
1.250
(11.11)
(11.11)
.438
.438
3/4 – 16
1 – 14
1 – 14
11/4 – 12
4.500 (114.30) 5.000 (127.00)
(25.40) 1.375
(34.93)
1.000
(34.93) 1.750
(44.45)
1.375
(74.68) 3.125
(79.38)
2.940
4.101 (104.16) 4.879 (123.92)
(25.40) 1.375
(34.93)
1.000
(25.40) 1.375
(34.93)
1.000
6.250 (158.75) 7.625 (193.68)
8.250 (209.55) 10.375 (263.53)
6.000 (152.40) 7.000 (177.80)
(22.23) 1.000
(25.40)
.875
(25.40) 1.125
(28.58)
1.000
(34.93) 1.625
(41.28)
1.375
(41.28) 1.875
(47.63)
1.625
4.125 (104.78) 4.625 (117.48)
4.375 (111.13) 4.875 (123.83)
(60.45) 2.813
(71.46)
2.380
(66.80) 3.063
(77.79)
2.630
6.313 (160.34) 7.063 (179.39)
6.563 (166.69) 7.313 (185.74)
Brookville, OH USA
.1"
(25.40)
1.3/8"
(34.93)
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
(25.40)
1.000
(25.40)
1.000
4.500 (114.30)
6.500 (165.10)
4.250 (107.95)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
4.125 (104.78)
4.375 (111.13)
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
Phone 937-833-4033
6" Bore (152.40)
www.norgren.com
7" Bore (177.80)
8" Bore (2
1.3/8"
(34.93) 1.3/8"
(
(44.45) 1.3/4"
(
1.3/4"
(41.28) 1.625
(
1.625
(50.80) 2.000
(
2.000
(50.78) 1.999
(
1.999
(60.30) 2.374
(
2.374
(63.50) 2.500
(
2.500
(15.88)
(
.625
.625
(19.05)
(
.750
.750
11/4 – 12
11/4 –
11/2 – 12
11/2 –
(28.58) 1.125
(
1.125
(38.10) 1.500
(
1.500
7.500 (190.50) 8.500 (2
(19.05)
(
.750
.750
13/8 – 12
13/8 –
13/4 – 12
13/4 –
(50.80) 2.000
(
2.000
(38.10) 1.500
(
1.500
(14.29)
(
.563
.563
1 – 14
1–1
11/4 – 12
11/4 –
5.125 (130.18) 5.125 (1
(34.93) 1.375
(
1.375
(44.45) 1.750
(
1.750
(82.55) 3.250
(
3.250
5.730 (145.54) 6.435 (1
(34.93) 1.375
(
1.375
(34.93) 1.375
(
1.375
8.750 (222.25) 9.750 (2
11.500 (292.10) 12.500 (3
8.500 (215.90) 9.500 ((2
(25.40) 1.000
(
1.000
(28.58) 1.125
(
1.125
(41.28) 1.625
(
1.625
(47.63) 1.875
(
1.875
4.875 (123.83) 4.875 (1
5.125 (130.18) 5.125 (1
(71.46) 2.813
(
2.813
(77.79) 3.063
(
3.063
7.313 (185.74) 7.313 (1
7.563 (192.10) 7.563 (1
ACT-1-49
Cylinder with 10 (MT4) Center Trunnion
● NFPA(MT4) 10 Center Trunnion Mount
10
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-50
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 10 (MT4) with Center Trunnion
Series J & EJ, NFPA Steel Air Cylinders with 10 (MT4) with Center Trunnion
EE NPT (2)
E Sq.
Y
R
P + Stroke
WF
øB Bushing
øMM
KK
Thds
UV
øTD
A
D
(Flats)
TM
TL
Standard &
Optional Rod Ends
J
BD
K
XI (Min.)
LB + Stroke
VF
ZB + Stroke
øB
CC
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
Customer
Must Specify
XI
TL
UM
øB
KK
Thds.
øB
KK
Thds.
G
C
øMM
A
A
VF
øMM
øMM
øMM
øMM
A
A
C
C
øB
FF
Thds.
øB
KK
Thds.
A Deep
C
VF
A
C
VF
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
Std.
O.S.
Std.
O.S.
Std.
O.S.
BD
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
P
R
TD +.000
TL
TM
UM
UV
VF
WF
XI min.
Y
ZB
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(63.50)
(15.88)
(19.05)
1.3/4"
1.625
2.000
1.999
2.374
2.500
.625
.750
-.001
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(63.50)
(15.88)
(19.05)
1.3/4"
1.625
2.000
1.999
2.374
2.500
.625
.750
1.3/4"
1.500
1.688
10.625
1.000
13/8 – 12
13/4 – 12
(50.80)
(38.10)
(14.29)
(50.80)
(38.10)
(14.29)
2.000
1.500
.563
1 – 14
11/4 – 12
2.250
2.000
.688
1 – 14
11/4 – 12
(130.18)
(34.93)
(44.45)
(82.55)
(145.54)
(34.93)
(34.93)
(222.25)
(292.10)
(215.90)
(25.40)
(28.58)
(41.28)
(47.63)
(123.83)
(130.18)
(71.46)
(77.79)
(185.74)
(192.10)
5.125
1.375
1.750
3.250
6.435
1.375
1.375
9.750
12.500
9.500
1.000
1.125
1.625
1.875
4.875
5.125
2.813
3.063
7.313
7.563
Brookville, OH USA
(44.45)
(50.80)
(50.80)
(57.15)
(60.30)
(66.65)
(76.20)
(19.05)
(22.23)
2."
2.000
2.250
2.374
2.624
3.000
.750
.875
12" Bore (304.80)
2."
2.1/2"
2.250
3.000
2.624
3.124
3.000
.875
1.000
11/2 – 12
13/4 – 12
(28.58)
(38.10)
(215.90)
(19.05)
1.125
1.500
8.500
.750
13/8 – 12
13/4 – 12
5.125
1.375
1.750
3.250
5.730
1.375
1.375
8.750
11.500
8.500
1.000
1.125
1.625
1.875
4.875
5.125
2.813
3.063
7.313
7.563
10" Bore (254.00)
11/4 – 12
11/2 – 12
(28.58)
(38.10)
(190.50)
(19.05)
1.125
1.500
7.500
.750
Std.
O.S.
Std.
O.S.
8" Bore (203.20)
1.3/8"
11/4 – 12
11/2 – 12
2.000
1.500
.563
LB
MM
1.3/8"
Std.
O.S.
G
J
K
KK
7" Bore (177.80)
(130.18)
(34.93)
(44.45)
(82.55)
(163.44)
(34.93)
(34.93)
(247.65)
(317.50)
((241.30)
(25.40)
(28.58)
(41.28)
(47.63)
(123.83)
(130.18)
(71.46)
(77.79)
(185.74)
(192.10)
6.375
1.750
2.000
4.125
7.969
1.750
1.750
12.000
15.500
11.750
1.125
1.125
1.875
2.000
5.625
5.750
3.125
3.250
8.938
9.063
(38.10)
(42.86)
(269.88)
(25.40)
13/4 – 12
2 – 12
(57.15)
(50.80)
(17.46)
11/4 – 12
11/2 – 12
(161.93)
(44.45)
(50.80)
(104.78)
(202.41)
(44.45)
(44.45)
(304.80)
(393.70)
(298.45)
(28.58)
(28.58)
(47.63)
(50.80)
(142.88)
(146.05)
(79.38)
(82.55)
(227.01)
(230.19)
Phone 937-833-4033
(50.80)
(63.50)
(57.15)
(76.20)
(66.65)
(79.35)
(76.20)
(22.23)
(25.40)
13/4 – 12
21/4 – 12
1.688
2.063
12.750
1.000
(42.86)
(52.39)
(323.85)
(25.40)
2 – 12
21/2 – 12
2.250
2.000
.688
(57.15)
(50.80)
(17.46)
11/2 – 12
17/8 – 12
(174.63)
6.375
(50.80)
2.000
(63.50)
2.500
(117.48)
4.625
(238.92)
9.406
(44.45)
1.750
(44.45)
1.750
(355.60)
14.000
(444.50)
17.500
(349.25)
13.750
(28.58)
1.125
(31.75)
1.250
(50.80)
2.000
(57.15)
2.250
(146.05)
5.750
(152.40)
6.000
(82.55)
3.250
(88.90)
3.500
(242.89)
9.563
(249.24)
9.813
www.norgren.com
ACT-1-51
Cylinder with 11 (MS1) Side End Angles
● NFPA (MS1) 11 Side End Angle Mount
11
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-52
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 11 (MS1) Side End Angles
Series J & EJ, NFPA Steel Air Cylinders with 11 (MS1) Side End Angles
XA + Stroke
EE NPT (2)
E Sq.
Y
R
P + Stroke
WF
øB Bushing
K
øMM
KK
Thds
AH
A
D
(Flats)
Standard &
Optional Rod Ends
øB
KK
Thds.
NF
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
A
LB + Stroke
VF
S
C
C
VF
øB
KK
Thds.
A Deep
øMM
A
AL
øB
FF
Thds.
øMM
øMM
A
C
VF
AO
SA + Stroke
øB
CC
Thds.
øMM
A
AT
J
G
C
øAB
C
VF
øMM
A
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
Std.
O.S.
Std.
O.S.
AB
AH
AL
AO
AT
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
MM
Std.
O.S.
NF
P
R
S
SA
VF
WF
XA
Y
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
11/2" Bore (38.10)
.5/8"
(15.88)
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(11.11)
.438
(30.16)
1.188
(25.40)
1.000
(9.53)
.375
(3.18)
.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 –14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(34.93)
1.375
(59.44)
2.340
(36.27)
1.428
(31.75)
1.250
6.000 (152.40)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.625 (142.88)
6.000 (152.40)
(46.74)
1.840
(56.39)
2.220
2" Bore (50.80)
.5/8"
(15.88)
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(11.11)
.438
(36.51)
1.438
(25.40)
1.000
(9.53)
.375
(3.18)
.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 –14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(34.93)
1.375
(59.44)
2.340
(46.68)
1.838
(44.45)
1.750
6.000 (152.40)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.625 (142.88)
6.000 (152.40)
(46.74)
1.840
(56.39)
2.220
21/2" Bore (63.50) 31/4" Bore (82.55)
.5/8"
(15.88)
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(11.11)
.438
(41.28)
1.625
(25.40)
1.000
(9.53)
.375
(3.18)
.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
5/8 –18
1 –14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(34.93)
1.375
(62.74)
2.470
(55.67)
2.192
(57.15)
2.250
6.125 (155.58)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.750 (146.05)
6.125 (155.58)
(46.74)
1.840
(56.39)
2.220
Brookville, OH USA
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(14.29)
.563
(49.21)
1.938
(31.75)
1.250
(12.70)
.500
(3.18)
.125
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(47.63)
1.875
(68.33)
2.690
(70.05)
2.758
(69.85)
2.750
7.375 (187.33)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.875 (174.63)
7.125 (180.98)
(60.45)
2.380
(66.80)
2.630
4" Bore (101.60)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(14.29)
.563
(57.15)
2.250
(31.75)
1.250
(12.70)
.500
((3.18)
.125
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(47.63)
1.875
(68.33)
2.690
(84.40)
3.323
(88.90)
3.500
7.375 (187.33)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.875 (174.63)
7.125 (180.98)
(60.45)
2.380
(66.80)
2.630
Phone 937-833-4033
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (2
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(17.46)
.688
(69.85)
2.750
(34.93)
1.375
(15.88)
.625
(4.75)
.187
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(50.80)
2.000
(74.68)
2.940
4.101 (104.16)
4.250 (107.95)
7.875 (200.03)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
7.250 (184.15)
7.500 (190.50)
(60.45)
2.380
(66.80)
2.630
1.3/8"
1.3/8"
1.3/8"
(
(
1.3/4"
(
1.625
(
2.000
(
.813
4.250 (1
(
1.813
(
.688
.250
(
1.999
(
2.374
(
.625
(
.750
11/4 –
11/2 –
(
1.125
(
1.500
8.500 (2
(
.750
13/8 –
13/4 –
(
2.000
(
1.500
(
.563
1–1
11/4 –
5.125 (1
(
1.375
(
1.750
(
1.813
(
3.250
6.442 (1
7.125 (1
8.750 (2
(
1.000
(
1.125
(
1.625
(
1.875
8.562 (2
8.813 (2
(
2.813
(
3.063
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(20.64)
.813
(82.55)
3.250
(34.93)
1.375
(15.88)
.625
(4.75)
.187
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
(53.98)
2.125
(79.38)
3.125
4.879 (123.92)
5.250 (133.35)
8.500 (215.90)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
8.000 (203.20)
8.250 (209.55)
(71.44)
2.813
(77.79)
3.063
www.norgren.com
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(20.64)
.813
(95.25)
3.750
(46.04)
1.813
(17.46)
.688
(6.35)
.250
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
7.500 (190.50)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
(46.04)
1.813
(82.55)
3.250
5.730 (145.54)
6.125 (155.58)
8.750 (222.25)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
8.562 (217.47)
8.813 (223.84)
(71.44)
2.813
(77.79)
3.063
ACT-1-53
Cylinder with 11 (MS1) Side End Angles
● NFPA (MS1) 11 Side End Angle Mount
11
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-54
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 11 (MS1) Side End Angles
Series J & EJ, NFPA Steel Air Cylinder with 11 (MS1) Side End Angles
XA + Stroke
EE NPT (2)
E Sq.
Y
R
P + Stroke
WF
øB Bushing
K
øMM
KK
Thds
AH
A
D
(Flats)
Standard &
Optional Rod Ends
øB
KK
Thds.
NF
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
LB + Stroke
VF
S
A
A
VF
øB
KK
Thds.
A Deep
øMM
A
C
C
AL
øB
FF
Thds.
øMM
øMM
A
C
VF
AO
SA + Stroke
øB
CC
Thds.
øMM
AT
J
G
C
øAB
øMM
A
C
VF
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
Std.
O.S.
Std.
O.S.
AB
AH
AL
AO
AT
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
Std.
O.S.
WF
XA
Y
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
8" Bore (203.20)
1.3/8"
1.3/4"
1.625
2.000
.813
4.250
1.813
.688
.250
1.999
2.374
.625
.750
11/4 – 12
11/2 – 12
1.125
1.500
8.500
.750
13/8 – 12
13/4 – 12
(34.93)
(44.45)
(41.28)
(50.80)
(20.64)
(107.95)
(46.04)
(17.46)
(6.35)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
(28.58)
(38.10)
(215.90)
(19.05)
1.500
1.688
10.625
1.000
(50.80)
(38.10)
(14.29)
2.250
2.000
.688
(130.18)
(34.93)
(44.45)
(46.04)
(82.55)
(163.63)
(180.98)
(222.25)
(25.40)
(28.58)
(41.28)
(47.63)
(217.47)
(223.84)
(71.44)
(77.79)
6.375
1.750
2.000
1.813
4.125
7.969
8.875
10.625
1.125
1.125
1.875
2.000
10.375
10.500
3.125
3.250
.2"
2.000
2.250
1.063
5.313
2.125
.875
.250
2.374
2.624
.750
.875
13/8 – 12
13/4 – 12
(50.80)
(38.10)
(14.29)
2.000
1.500
.563
1 – 14
11/4 – 12
5.125
1.375
1.750
1.813
3.250
5.730
6.125
8.750
1.000
1.125
1.625
1.875
8.562
8.813
2.813
3.063
10" Bore (254.00)
11/4 – 12
11/2 – 12
(28.58)
(38.10)
(190.50)
(19.05)
1.125
1.500
7.500
.750
Std.
O.S.
NF
P
R
S
SA
VF
(34.93)
(44.45)
(41.28)
(50.80)
(20.64)
(95.25)
(46.04)
(17.46)
(6.35)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
1.625
2.000
.813
3.750
1.813
.688
.250
1.999
2.374
.625
.750
2.000
1.500
.563
LB
MM
1.3/8"
Std.
O.S.
G
J
K
KK
7" Bore (177.80)
1 – 14
11/4 – 12
(130.18)
(34.93)
(44.45)
(46.04)
(82.55)
(145.54)
(155.58)
(222.25)
(25.40)
(28.58)
(41.28)
(47.63)
(217.47)
(223.84)
(71.44)
(77.79)
5.125
1.375
1.750
1.813
3.250
6.442
7.125
8.750
1.000
1.125
1.625
1.875
8.562
8.813
2.813
3.063
Brookville, OH USA
(44.45)
(50.80)
(50.80)
(57.15)
(26.99)
(134.94)
(53.98)
(22.23)
(6.35)
(60.30)
(66.65)
(19.05)
(22.23)
11/2 – 12
13/4 – 12
(38.10)
(42.86)
(269.88)
(25.40)
13/4 – 12
2 – 12
(57.15)
(50.80)
(17.46)
11/4 – 12
11/2 – 12
(161.93)
(44.45)
(50.80)
(46.04)
(104.78)
(202.41)
(225.43)
(269.53)
(28.58)
(28.58)
(47.63)
(50.80)
(263.53)
(266.70)
(79.38)
(82.55)
Phone 937-833-4033
12" Bore (304.80)
.2"
2.1/2"
2.250
3.000
1.063
6.375
2.125
.875
.250
2.624
3.124
.875
1.000
(50.80)
(63. 50)
(57.15)
(76.20)
(26.99)
(161.93)
(53.98)
(22.23)
(6.35)
(66.65)
(79.35)
(22.23)
(25.40)
13/4 – 12
21/4 – 12
(42.86)
1.688
(52.39)
2.063
(323.85)
12.750
(25.40
1.000
2 – 12
21/2 – 12
(57.15)
2.250
(50.80)
2.500
(17.46)
.688
11/2 – 12
17/8 – 12
(174.63)
6.875
(50.80)
2.000
(63.50)
2.500
(46.04)
1.813
(117.48)
4.625
(238.92)
9.406
(279.40)
11.000
(282.58)
11.125
(28.58)
1.125
(31.75)
1.250
(50.80)
2.000
(57.15)
2.250
(279.40)
11.000
(285.75)
11.250
(82.55)
3.250
(88.90)
3.500
www.norgren.com
ACT-1-55
Cylinder with 12 (MP1) Cap Fixed Clevis
● NFPA (MP1) 12 Cap Fixed Clevis Mount
for 1-1/2" to 6" steel bore sizes.
12
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-56
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 12 (MP1) Cap Fixed Clevis
Series J & EJ, NFPA Steel Air Cylinder with 12 (MP1) Cap Fixed Clevis
Y
P + Stroke
EE NPT (2)
WF
øB Bushing
øMM
LR
Supplied with
Standard Pin
(See page 145)
øCD
KK
Thds
MR
A
J
G
C
VF
øB
KK
Thds.
A
CW
CB
M
XC + Stroke
øB
CC
Thds.
øMM
D
Across
Flats
L
E Sq.
Standard &
Optional Rod Ends
øB
KK
Thds.
CW
K
LB + Stroke
øB
CC
Thds.
øMM
A
VF
øMM
A
C
C
øB
KK
Thds.
A Deep
øB
FF
Thds.
øMM
øMM
A
C
VF
A
C
VF
øMM
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
Std.
ø Rod
O.S.
Std.
A
O.S.
+.000 Std.
B
-.002 O.S.
Std.
C
O.S.
CB
Std.
CC
O.S.
CD
CW
Std.
D
O.S.
E
EE
Std.
FF
O.S.
G
J
K
Std.
KK
O.S.
L
LB
LR
M
Std.
MM
O.S.
MR
P
Std.
VF
O.S.
Std.
WF
O.S.
Std.
XC
O.S.
Std.
Y
O.S.
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(19.05)
.750
(92.08)
3.625
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(59.44)
2.340
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.375 (136.53)
5.750 (146.05)
(46.74)
1.840
(56.39)
2.220
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(19.05)
.750
(92.08)
3.625
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(59.44)
2.340
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.375 (136.53)
5.750 (146.05)
(46.74)
1.840
(56.39)
2.220
21/2" Bore (63.50) 31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (20
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(19.05)
.750
(95.25)
3.750
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(62.74)
2.470
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.500 (139.70)
5.875 (149.23)
(46.74)
1.840
(56.39)
2.220
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(15.88)
.625
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
(31.75)
1.250
4.250 (107.95)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(68.33)
2.690
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.875 (174.63)
7.125 (180.98)
(60.45)
2.380
(66.80)
2.630
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(15.88)
.625
(20.64)
.813
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
(31.75)
1.250
4.500 (114.30)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(74.68)
2.940
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
7.125 (180.98)
7.375 (187.33)
(60.45)
2.380
(66.80)
2.630
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(19.05)
.750
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
(38.10)
1.500
5.000 (127.00)
(38.10)
1.500
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(30.16)
1.188
(79.38)
3.125
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
8.125 (206.38)
8.375 (212.73)
(71.44)
2.813
(77.79)
3.063
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(19.05)
.750
(28.58)
1.125
(38.10)
1.500
7.500 (190.50)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
(38.10)
1.500
5.125 (130.18)
(38.10)
1.500
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(30.16)
1.188
(82.55)
3.250
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
8.250 (209.55)
8.500 (215.90)
(71.44)
2.813
(77.79)
3.063
1.3/8"
(3
(4
1.3/4"
(4
1.625
(5
2.000
(5
1.999
(6
2.374
(1
.625
(1
.750
(3
1.500
11/4 – 1
11/2 – 1
(2
1.000
(1
.750
(2
1.125
(3
1.500
8.500 (21
(1
.750
13/8 – 1
13/4 – 1
(5
2.000
(3
1.500
(1
.563
1 – 14
11/4 – 1
(3
1.500
5.125 (13
(3
1.500
(2
1.000
(3
1.375
(4
1.750
(3
1.188
(8
3.250
(2
1.000
(2
1.125
(4
1.625
(4
1.875
8.250 (20
8.500 (21
(7
2.813
(7
3.063
Brookville, OH USA
.1"
(25.40)
1.3/8"
(34.93)
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(15.88)
.625
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
(31.75)
1.250
4.250 (107.95)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(68.33)
2.690
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.875 (174.63)
7.125 (180.98)
(60.45)
2.380
(66.80)
2.630
Phone 937-833-4033
www.norgren.com
ACT-1-57
Cylinder with 12 (MP1) Cap Fixed Clevis
for 7" to 12" steel bore sizes.
12
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-58
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard
on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 12 (MP1) Cap Fixed Clevis
Series J & EJ, NFPA Steel Air Cylinder with 12 (MP1) Cap Fixed Clevis
Y
P + Stroke
EE NPT (2)
WF
øB Bushing
øMM
LR
Supplied with
Standard Pin
(See page 145)
øCD
KK
Thds
MR
A
J
G
C
LB + Stroke
VF
CW
CB
M
XC + Stroke
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
L
E Sq.
Standard &
Optional Rod Ends
øB
KK
Thds.
CW
K
øB
CC
Thds.
øMM
A
A
øMM
A
C
C
VF
øB
KK
Thds.
A Deep
øB
FF
Thds.
øMM
øMM
A
A
C
VF
øMM
C
VF
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
C
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
CB
CC
Std.
O.S.
E
EE
FF
MR
P
VF
WF
XC
Y
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
(38.10)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
1.500
1.3/4"
1.375
1.000
1.500
1.688
10.625
1.000
13/8 – 12
13/4 – 12
(50.80)
(38.10)
(14.29)
(50.80)
(38.10)
(14.29)
2.000
1.500
.563
1 – 14
11/4 – 12
2.250
2.000
.688
1 – 14
11/4 – 12
(38.10)
(130.18)
(38.10)
(25.40)
(34.93)
(44.45)
(30.16)
(82.55)
(25.40)
(28.58)
(41.28)
(47.63)
(209.55)
(215.90)
(71.44)
(77.79)
1.500
5.125
1.500
1.000
1.375
1.750
1.188
3.250
1.000
1.125
1.625
1.875
8.250
8.500
2.813
3.063
Brookville, OH USA
(44.45)
(50.80)
(50.80)
(57.15)
(60.30)
(66.65)
(19.05)
(22.23)
(50.80)
2."
2.000
2.250
2.374
2.624
.750
.875
2.000
12" Bore (304.80)
2."
2.1/2"
2.250
3.000
2.624
3.124
.875
1.000
2.500
11/2 – 12
13/4 – 12
(25.40)
(19.05)
(28.58)
(38.10)
(215.90)
(19.05)
1.000
.750
1.125
1.500
8.500
.750
13/8 – 12
13/4 – 12
1.500
5.125
1.500
1.000
1.375
1.750
1.188
3.250
1.000
1.125
1.625
1.875
8.250
8.500
2.813
3.063
10" Bore (254.00)
11/4 – 12
11/2 – 12
(25.40)
(19.05)
(28.58)
(38.10)
(190.50)
(19.05)
1.000
.750
1.125
1.500
7.500
.750
Std.
O.S.
Std.
O.S.
8" Bore (203.20)
1.3/8"
11/4 – 12
11/2 – 12
2.000
1.500
.563
L
LB
LR
M
MM
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
(38.10)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
1.500
Std.
O.S.
G
J
K
KK
1.3/8"
Std.
O.S.
CD
CW
D
7" Bore (177.80)
(38.10)
(130.18)
(38.10)
(25.40)
(34.93)
(44.45)
(30.16)
(82.55)
(25.40)
(28.58)
(41.28)
(47.63)
(209.55)
(215.90)
(71.44)
(77.79)
2.125
6.375
1.875
1.375
1.750
2.000
1.625
4.125
1.125
1.125
1.875
2.000
10.375
10.500
3.125
3.250
(34.93)
(25.40)
(38.10)
(42.86)
(269.88)
(25.40)
13/4 – 12
2 – 12
(57.15)
(50.80)
(17.46)
11/4 – 12
11/2 – 12
(53.98)
(161.93)
(47.63)
(34.93)
(44.45)
(50.80)
(41.28)
(104.78)
(28.58)
(28.58)
(47.63)
(50.80)
(263.53)
(266.70)
(79.38)
(82.55)
Phone 937-833-4033
(50.80)
(63.50)
(57.15)
(76.20)
(66.65)
(79.35)
(22.23)
(25.40)
(63.50)
()
()
()
()
()
()
()
()
()
(44.45)
(31.75)
(42.86)
(52.39)
(323.85)
(25.40)
()
()
()
()
()
()
13/4 – 12
21/4 – 12
1.750
1.250
1.688
2.063
12.750
1.000
2 – 12
21/2 – 12
(57.15)
(50.80)
(17.46)
()
()
()
(57.15)
(174.63)
(53.98)
(44.45)
(50.80)
(63.50)
(53.98)
(117.48)
(28.58)
(31.75)
(50.80)
(57.15)
(282.58)
(288.93)
(82.55)
(88.90)
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
()
2.250
2.000
.688
11/2 – 12
17/8 – 12
2.250
6.875
2.125
1.750
2.000
2.500
2.125
4.625
1.125
1.250
2.000
2.250
11.125
11.375
3.250
3.500
www.norgren.com
ACT-1-59
Cylinder with 15 (MS7) Side End Lugs
● NFPA (MS7) 15 End Lug Mount
15
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TK
Thrust Key
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-60
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard
on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 15 (MS7) Side End Lugs
Series J & EJ, NFPA Steel Air Cylinder with 15 (MS7) Side End Lugs
XE + Stroke
Y
EE NPT (2)
P + Stroke
WF
øB Bushing
øMM
KK
Thds
øEB Hole (4)
E
2
ET
VF
D
(Flats)
ZE + Stroke
E Sq.
SE + Stroke
øB
CC
Thds.
øMM
D
Across
Flats
EO
R
øB
KK
Thds.
A
J
øB
CC
Thds.
øMM
A
VF
øB
KK
Thds.
A Deep
øMM
øB
FF
Thds.
øMM
A
C
C
EL
LB + Stroke
EF
Standard &
Optional Rod Ends
øB
KK
Thds.
G
C
øMM
A
C
VF
C
VF
øMM
A
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
Std.
ø Rod
O.S.
Std.
A
O.S.
+.000 Std.
B
-.002 O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
EB
EE
EF
EL
EO
ET
Std.
FF
O.S.
G
J
Std.
KK
O.S.
LB
Std.
MM
O.S.
P
R
SE
Std.
VF
O.S.
Std.
WF
O.S.
Std.
XE
O.S.
Std.
Y
O.S.
Std.
ZE
O.S.
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(7.94)
.313
(9.53)
.375
(28.58)
1.125
(19.05)
.750
(6.35)
.250
(12.70)
.500
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
5.500 (139.70)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.375 (136.53)
5.750 (146.05)
(46.74)
1.840
(56.39)
2.220
5.625 (142.88)
6.000 (152.40)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
(9.53)
.375
(33.34)
1.313
(23.81)
.938
(7.94)
.313
(19.05)
.750
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
5.875 (149.23)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.563 (141.29)
5.938 (150.81)
(46.74)
1.840
(56.39)
2.220
5.875 (149.23)
6.250 (158.75)
21/2" Bore (63.50) 31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (203.20)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
(9.53)
.375
(36.51)
1.438
(26.99)
1.063
(7.94)
.313
(19.05)
.750
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
6.250 (158.75)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.813 (147.64)
6.188 (157.16)
(46.74)
1.840
(56.39)
2.220
6.125 (155.58)
6.500 (165.10)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(11.11)
.438
(12.70)
.500
(41.28)
1.625
(25.40)
1.000
(9.53)
.375
(31.75)
1.250
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.40)
3.323
6.875 (174.63)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.625 (168.28)
6.875 (174.63)
(60.45)
2.380
(66.80)
2.630
7.000 (177.80)
7.250 (184.15)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
5.500 (139.70)
(14.29)
.563
(12.70)
.500
(42.88)
1.688
(26.99)
1.063
(12.70)
.500
(38.10)
1.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(74.68)
2.940
4.101 (104.16)
7.250 (184.15)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.938 (176.21)
7.188 (182.56)
(60.45)
2.380
(66.80)
2.630
7.438 (188.91)
7.688 (195.26)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(14.29)
.563
(19.05)
.750
(44.45)
1.750
(25.40)
1.000
(12.70)
.500
(38.10)
1.500
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
1 – 14
11/4 – 12
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
(79.38)
3.125
4.879 (123.92)
7.750 (196.85)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
7.625 (193.68)
7.875 (200.03)
(61.91)
2.813
(77.79)
3.063
8.125 (206.38)
8.375 (212.73)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
7.500 (190.50)
(17.46)
.688
(19.05)
.750
(44.45)
1.750
(28.58)
1.125
(15.88)
.625
(44.45)
1.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
1 – 14
11/4 – 12
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
(82.55)
3.250
5.730 (145.54)
7.375 (187.33)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
7.875 (200.03)
8.125 (206.38)
(71.44)
2.813
(77.79)
3.063
8.500 (215.90)
8.750 (222.25)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
8.500 (215.90)
(17.46)
.688
(19.05)
.750
(44.45)
1.750
(28.58)
1.125
(15.88)
.625
(52.39)
2.063
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
1 – 14
11/4 – 12
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
(82.55
3.250
6.442 (163.63)
7.375 (187.33)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
7.875 (200.03)
8.125 (206.38)
(71.44)
2.813
(77.79)
3.063
8.500 (215.90)
8.750 (222.25)
.1"
(25.40)
1.3/8"
(34.93)
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(11.11)
.438
(12.70)
.500
(38.10)
1.500
(22.23)
.875
(9.53)
.375
(25.40)
1.000
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
6.625 (168.28)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.500 (165.10)
6.750 (171.45)
(60.45)
2.380
(66.80)
2.630
6.875 (174.63)
7.125 (180.98)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-61
Cylinder 16 Sleeve Nut Construction Side Tapped (Universal)
● 16 Sleeve Nut Constuction
Side Tapped (Universal Mount)
16
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-62
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard
on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA Cylinder with 16 Sleeve Nut Construction Side Tapped (Universal)
Series J & EJ Cylinder with 16 Sleeve Nut Construction Side Tapped (Universal)
16 Sleeve Nut Construction
Basic Cylinder Side Tapped (Universal)
Y
P + Stroke
WF
EE NPT (2)
øB Bushing
øMM
AA
KK
Thds
DD Thds.
4 Places
Both Ends
C
A
D
(Flats)
G
NT Tap
ND Depth
TN
Standard &
Optional Rod Ends
øB
KK
Thds.
R
E Sq.
ZJ + Stroke
øB
KK
Thds.
A
LB + Stroke
SN + Stroke
XT
øB
CC
Thds.
øMM
D
Across
Flats
J
VF
øB
CC
Thds.
øMM
A
VF
øMM
øB
FF
Thds.
øMM
A
C
C
øB
KK
Thds.
A Deep
øMM
A
C
VF
A
C
VF
øMM
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
Std.
O.S.
Std.
O.S.
AA
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
DD
E
EE
FF
Std.
O.S.
G
J
KK
Std.
O.S.
LB
MM
Std.
O.S.
NT
ND
P
R
SN
TN
VF
WF
XT
Y
ZJ
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
11/2" Bore (38.10)
2" Bore (50.80)
.5/8"
(15.88)
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(51.31)
2.020
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
1/4 – 28
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
1/4 – 20
(9.53)
.375
(59.44)
2.340
(36.27)
1.428
(57.15)
2.250
(15.88)
.625
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(49.21)
1.938
(58.74)
2.313
(46.74)
1.840
(56.39)
2.220
4.625 (117.48)
5.000 (127.00)
.5/8"
(15.88)
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(66.04)
2.600
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
5/16 – 24
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
5/16 – 18
(9.53)
.375
(59.44)
2.340
(46.68)
1.838
(57.15)
2.250
(22.23)
.875
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(49.21)
1.938
(58.74)
2.313
(46.74)
1.840
(56.39)
2.220
4.625 (117.48)
5.000 (127.00)
21/2" Bore (63.50) 31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (203
.5/8"
(15.88)
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(78.74)
3.100
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(20.64)
.813
5/16 – 24
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
3/8 – 16
(12.70)
.500
(62.74)
2.470
(55.67)
2.192
(60.33)
2.375
(31.75)
1.250
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(49.21)
1.938
(58.74)
2.313
(46.74)
1.840
(56.39)
2.220
4.750 (120.65)
5.125 (130.18)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
4.700 (119.38)
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
3/8 – 24
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
1/2 – 13
(19.05)
.750
(68.33)
2.690
(84.40)
3.323
(66.68)
2.625
(52.39)
2.063
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(61.91)
2.438
(68.26)
2.688
(60.45)
2.380
(66.80)
2.630
5.625 (142.88)
5.875 (149.23)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
5.800 (147.32)
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
1/2 – 20
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
5/8 – 11
(23.81)
.938
(74.68)
2.940
4.101 (104.16)
(73.03)
2.875
(68.26)
2.688
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(61.91)
2.438
(68.26)
2.688
(60.45)
2.380
(66.80)
2.630
5.625 (142.88)
5.875 (149.23)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
6.900 (175.26)
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
1/2 – 20
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
1 – 14
11/4 – 12
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
3/4 – 10
(28.58)
1.125
(79.38)
3.125
4.879 (123.92)
(79.38)
3.125
(82.55)
3.250
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
(71.44)
2.813
(77.79)
3.063
6.625 (168.28)
6.875 (174.63)
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
8.100 (205.75)
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
(34
1.3/8"
(44
1.3/4"
(41
1.625
(50
2.000
9.100 (231
(50
1.999
(60
2.374
(15
.625
(19
.750
11/4 – 12
11/2 – 12
(28
1.125
(38
1.500
7.500 (190.50)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
1 – 14
11/4 – 12
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
8.500 (215
(19
.750
13/8 – 12
13/4 – 12
(50
2.000
(38
1.500
1 – 14
11/4 – 12
5.125 (130
(34
1.375
(44
1.750
Brookville, OH USA
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(99.06)
3.900
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(20.64)
.813
(28.58)
1.125
3/8 – 24
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
1/2 – 13
(19.05)
.750
(68.33)
2.690
(70.05)
2.758
(66.68)
2.625
(38.10)
1.500
..875 (22.23)
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(61.91)
2.438
(68.26)
2.688
(60.45)
2.380
(66.80)
2.630
5.625 (142.88)
5.875 (149.23)
Phone 937-833-4033
www.norgren.com
3.250
5.730
(82.55)
(145.54)
3.250
6.435
(82
(163
1.000
1.125
1.625
1.875
(25.40)
(28.58)
(41.28)
(47.63)
1.000
1.125
1.625
1.875
(25
(28
(41
(47
2.813
3.063
(71.44)
(77.79)
2.813
3.063
(71
(77
ACT-1-63
Cylinder with 20 (MF5) Head Square Flange
● NFPA (MF5) 20 Head Square Flange Mount
20
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-64
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinders with 20 (MF5) Head Square Flange
Series J & EJ, NFPA Steel Air Cylinder with 20 (MF5) Head Square Flange
Y
EE NPT (2)
FB Holes (8)
P + Stroke
WF
øB Bushing
øMM
KK
Thds
UF TF
A
Standard &
Optional Rod Ends
øB
KK
Thds.
F
øB
KK
Thds.
F
Y
ZB
øMM
C
A
C
V
V
C
C
V
V
Type 2 Solid
Type 3 Female
Type 6 Solid
(Optional)
(Full Thread
Male Optional)
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
P
R
TF
UF
WF
øMM
A
Male Optional)
LB
W
øMM
F
Type 2 Studded
G
J
K
V
øB
FF
Thds.
F
Male Optional)
E
EE
F
FB
MM
V
øB
KK
Thds.
A Deep
Type 1 Studded
-.002
KK
øMM
A
C
F
+.000
FF
øB
CC
Thds.
F
(Small Male)
A
D
LB + Stroke
F
Type 1 Solid
ø Rod
CC
øB
CC
Thds.
øMM
V
Dimension
C
K
ZB + Stroke
A
C
J
E Sq.
A
B
V
W
R
øMM
D
Across
Flats
G
C
D
(Flats)
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
11/2" Bore (38.10)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.124
(28.55)
1.499
(38.08)
.375
(9.53)
.500
(12.70)
1/2 – 20
7/8 – 14
.500
(12.70)
.813
(20.64)
2.000
(50.80)
.375
(9.53)
.375
(9.53)
.313
(7.94)
5/8 –18
1 – 14
1.500
(38.10)
1.000
(25.40)
.250
(6.35)
7/16 – 20
3/4 –16
3.625
(92.08)
.625
(15.88)
1.000
(25.40)
2.340
(59.44)
1.428
(36.27)
2.750
(69.85)
3.375
(85.73)
.250
(6.35)
.500
(12.70)
.625
(15.88)
1.000
(25.40)
1.000
(25.40)
1.375
(34.92)
1.840
(46.74)
2.220
(56.39)
4.875 (123.83)
5.250 (133.35)
2" Bore (50.80)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.124
(28.55)
1.499
(38.08)
.375
(9.53)
.500
(12.70)
1/2 – 20
7/8 – 14
.500
(12.70)
.813
(20.64)
2.500
(63.50)
.375
(9.53)
.375
(9.53)
.375
(9.53)
5/8 –18
1 – 14
1.500
(38.10)
1.000
(25.40)
.313
(7.94)
7/16 – 20
3/4 –16
3.625
(92.08)
.625
(15.88)
1.000
(25.40)
2.340
(59.44)
1.838
(46.68)
3.375
(85.73)
4.125 (104.78)
.250
(6.35)
.500
(12.70)
.625
(15.88)
1.000
(25.40)
1.000
(25.40)
1.375
(34.92)
1.840
(46.74)
2.220
(56.39)
4.938 (125.41)
5.313 (134.94)
21/2" Bore (63.50)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.124
(28.55)
1.499
(38.08)
.375
(9.53)
.500
(12.70)
1/2 – 20
7/8 – 14
.500
(12.70)
.813
(20.64)
3.000
(76.20)
.375
(9.53)
.375
(9.53)
.375
(9.53)
5/8 –18
1 – 14
1.500
(38.10)
1.000
(25.40)
.313
(7.94)
7/16 – 20
3/4 –16
3.750
(95.25)
.625
(15.88)
1.000
(25.40)
2.470
(62.74)
2.192
(55.67)
3.875
(98.43)
4.625 (117.48)
.250
(6.35)
.500
(12.70)
.625
(15.88)
1.000
(25.40)
1.000
(25.40)
1.375
(34.92)
1.840
(46.74)
2.220
(56.39)
5.063 (128.59)
5.438 (138.11)
Brookville, OH USA
31/4" Bore (82.55)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.499
(38.08)
1.999
(50.78)
.500
(12.70)
.625
(15.88)
7/8 – 14
11/4 – 12
.813
(20.64)
1.125
(28.58)
3.750
(95.25)
.500
(12.70)
.625
(15.88)
.438
(11.11)
1 – 14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.375
(9.53)
3/4 – 16
1 – 14
4.250 (107.95)
1.000
(25.40)
1.375
(34.93)
2.690
(68.33)
2.758
(70.05)
4.688 (119.06)
5.500 (139.70)
.250
(6.35)
.375
(9.53)
.750
(19.05)
1.000
(25.40)
1.375
(34.92)
1.625
(41.27)
2.380
(60.45)
2.630
(66.80)
6.000 (152.40)
6.250 (158.75)
4" Bore (101.60)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.499
(38.08)
1.999
(50.78)
.500
(12.70)
.625
(15.88)
7/8 – 14
11/4 – 12
.813
(20.64)
1.125
(28.58)
4.500 (114.30)
.500
(12.70)
.625
(15.88)
.438
(11.11)
1 – 14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.375
(9.53)
3/4 – 16
1 – 14
4.250 (107.95)
1.000
(25.40)
1.375
(34.93)
2.690
(68.33)
3.323
(84.40)
5.438 (138.11)
6.250 (158.75)
.250
(6.35)
.375
(9.53)
.750
(19.05)
1.000
(25.40)
1.375
(34.92)
1.625
(41.27)
2.380
(60.45)
2.630
(66.80)
6.000 (152.40)
6.250 (158.75)
Phone 937-833-4033
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.499
(38.08)
1.999
(50.78)
.500
(12.70)
.625
(15.88)
7/8 – 14
11/4 – 12
.813
(20.64)
1.125
(28.58)
5.500 (139.70)
.500
(12.70)
.625
(15.88)
.563
(14.29)
1 – 14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.438
(11.11)
3/4 – 16
1 – 14
4.500 (114.30)
1.000
(25.40)
1.375
(34.93)
2.940
(74.68)
4.101 (104.16)
6.625 (168.28)
7.625 (193.68)
.250
(6.35)
.375
(9.53)
.750
(19.05)
1.000
(25.40)
1.375
(34.92)
1.625
(41.27)
2.380
(60.45)
2.630
(66.80)
6.313 (160.34)
6.563 (166.69)
1.3/8"
1.3/8"
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
1.999
(50.78)
2.374
(60.30)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
8.500 (215.90)
.750
(19.05)
–
.688
(17.45)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.500
(38.10)
.563
(14.29)
1 – 14
11/4 – 12
5.125 (130.18)
1.355
(34.42)
1.730
(43.94)
3.250
(82.55)
6.435 (163.44)
–
–
.375
(9.53)
.375
(9.53)
1.625
(41.28)
1.875
(47.63)
–
–
2.813
(71.44)
3.063
(77.79)
7.313 (185.74)
7.625 (193.68)
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
1.999
(50.78)
2.374
(60.30)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
6.500 (165.10)
.750
(19.05)
.750
(19.05)
.563
(14.29)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.500
(38.10)
.438
(11.11)
1 – 14
11/4 – 12
5.000 (127.00)
1.375
(34.93)
1.750
(44.45)
3.125
(79.38)
4.879 (123.92)
7.625 (193.68)
8.625 (219.08)
.250
(6.35)
.375
(9.53)
.875
(22.23)
1.125
(28.58)
1.625
(41.27)
1.875
(47.63)
2.813
(71.44)
3.063
(77.79)
7.063 (179.39)
7.313 (185.74)
www.norgren.com
ACT-1-65
Cylinder with 21 (MF6) Cap Square Flange
● NFPA (MF6) 21 Cap Square Flange Mount
21
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
7R Removable Head Trunnion (MT1) - A & EA
8R Cap Trunnion (MT2) - A & EA
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-66
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 21 (MF6) Cap Square Flange
Series J & EJ, NFPA Steel Air Cylinder with 21 (MF6) Cap Square Flange
XF + Stroke
Y
øB Bushing
EE NPT (2)
FB Holes (8)
P + Stroke
WF
øMM
KK
Thds
TF UF
A
G
C
VF
Standard &
Optional Rod Ends
øB
KK
Thds.
øB
KK
Thds.
A
VF
Y
ZF
C
C
VF
VF
VF
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
P
R
TF
UF
XF
C
VF
LB
WF
C
VF
(Small Male)
G
J
K
VF
øMM
A
Type 6 Solid
E
EE
F
FB
MM
øMM
Type 3 Female
-.002
KK
øMM
A
Type 2 Solid
+.000
FF
øMM
øB
FF
Thds.
Type 2 Studded
A
D
øB
KK
Thds.
A Deep
Type 1 Studded
ø Rod
CC
øB
CC
Thds.
Type 1 Solid
Dimension
C
E Sq.
A
C
C
B
R
ZF + Stroke
øMM
A
F
LB + Stroke
øB
CC
Thds.
øMM
D
Across
Flats
J
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
11/2" Bore (38.10)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.124
(28.55)
1.499
(38.08)
.375
(9.53)
.500
(12.70)
1/2 – 20
7/8 – 14
.500
(12.70)
.813
(20.64)
2.000
(50.80)
.375
(9.53)
.375
(9.53)
.313
(7.94)
5/8 – 18
1 – 14
1.500
(38.10)
1.000
(25.40)
.250
(6.35)
7/16 – 20
3/4 – 16
3.625
(92.08)
.625
(15.88)
1.000
(25.40)
2.340
(59.44)
1.428
(36.27)
2.750
(69.85)
3.375
(85.73)
.625
(15.88)
.875
(22.23)
1.000
(25.40)
1.375
(34.92)
4.625 (117.48)
5.000 (127.00)
1.840
(46.74)
2.220
(56.39)
5.000 (127.00)
5.375 (136.53)
2" Bore (50.80)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.124
(28.55)
1.499
(38.08)
.375
(9.53)
.500
(12.70)
1/2 – 20
7/8 – 14
.500
(12.70)
.813
(20.64)
2.500
(63.50)
.375
(9.53)
.375
(9.53)
.375
(9.53)
5/8 – 18
1 – 14
1.500
(38.10)
1.000
(25.40)
.313
(7.94)
7/16 – 20
3/4 – 16
3.625
(92.08)
.625
(15.88)
1.000
(25.40)
2.340
(59.44)
1.838
(46.68)
3.375
(85.73)
4.125 (104.78)
.625
(15.88)
.875
(22.23)
1.000
(25.40)
1.375
(34.92)
4.625 (117.48)
5.000 (127.00)
1.840
(46.74)
2.220
(56.39)
5.000 (127.00)
5.375 (136.53)
21/2" Bore (63.50)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.124
(28.55))
1.499
(38.08)
.375
(9.53)
.500
(12.70)
1/2 – 20
7/8 – 14
.500
(12.70)
.813
(20.64)
3.000
(76.20)
.375
(9.53)
.375
(9.53)
.375
(9.53)
5/8 – 18
1 – 14
1.500
(38.10)
1.000
(25.40)
.313
(7.94)
7/16 – 20
3/4 – 16
3.750
(95.25)
.625
(15.88)
1.000
(25.40)
2.470
(62.74)
2.192
(55.67)
3.875
(98.43)
4.625 (117.48)
.625
(15.88)
.875
(22.23)
1.000
(25.40)
1.375
(34.92)
4.750 (120.65)
5.125 (130.18)
1.840
(46.74)
2.220
(56.39)
5.125 (130.18)
5.500 (139.70)
Brookville, OH USA
31/4" Bore (82.55)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.499
(38.08)
1.999
(50.78)
.500
(12.70)
.625
(15.88)
7/8 – 14
11/4 – 12
.813
(20.64)
1.125
(28.58)
3.750
(95.25)
.500
(12.70)
.625
(15.88)
.438
(11.11)
1 – 14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.375
(9.53)
3/4 – 16
1 – 14
4.250 (107.95)
1.000
(25.40)
1.375
(34.93)
2.690
(68.33)
2.758
(70.05)
4.688 (119.06)
5.500 (139.70)
.875
(22.23)
1.000
(25.40)
1.375
(34.92)
1.625
(41.27)
5.625 (142.88)
5.875 (149.23)
2.380
(60.45)
2.630
(66.80)
6.250 (158.75)
6.500 (165.10)
4" Bore (101.60)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.499
(38.08)
1.999
(50.78)
.500
(12.70)
.625
(15.88)
7/8 – 14
11/4 – 12
.813
(20.64)
1.125
(28.58)
4.500 (114.30)
.500
(12.70)
.625
(15.88)
.438
(11.11)
1 – 14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.375
(9.53)
3/4 – 16
1 – 14
4.250 (107.95)
1.000
(25.40)
1.375
(34.93)
2.690
(68.33)
3.323
(84.40)
5.438 (138.11)
6.250 (158.75)
.875
(22.23)
1.000
(25.40)
1.375
(34.92)
1.625
(41.27)
5.625 (142.88)
5.875 (149.23)
2.380
(60.45)
2.630
(66.80)
6.250 (158.75)
6.500 (165.10)
Phone 937-833-4033
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.499
(38.08)
1.999
(50.78)
.500
(12.70)
.625
(15.88)
7/8 – 14
11/4 – 12
.813
(20.64)
1.125
(28.58)
5.500 (139.70)
.500
(12.70)
.625
(15.88)
.563
(14.29)
1 – 14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.438
(11.11)
3/4 – 16
1 – 14
4.500 (114.30)
1.000
(25.40)
1.375
(34.93)
2.940
(74.68)
4.101 (104.16)
6.625 (168.28)
7.625 (193.68)
.875
(22.23)
1.000
(25.40)
1.375
(34.92)
1.625
(41.27)
5.875 (149.23)
6.125 (155.58)
2.380
(60.45)
2.630
(66.80)
6.500 (165.10)
6.750 (171.45)
1.3/8"
1.3/8"
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
1.999
(50.78)
2.374
(60.30)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
8.500 (215.90)
.750
(19.05)
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
1.999
(50.78)
2.374
(60.30)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
6.500 (165.10)
.750
(19.05)
.750
(19.05)
.563
(14.29)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.500
(38.10)
.438
(11.11)
1 – 14
11/4 – 12
5.000 (127.00)
1.375
(34.93)
1.750
(44.45)
3.125
(79.38)
4.879 (123.92)
7.625 (193.68)
8.625 (219.08)
1.000
(25.40)
1.125
(28.58)
1.625
(41.27)
1.875
(47.63)
6.625 (168.27)
6.875 (174.63)
2.813
(71.44)
3.063
(77.79)
7.375 (187.33)
7.625 (193.68)
www.norgren.com
.687
(17.45)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.500
(38.10)
.625
(15.88)
1 – 14
11/4 – 12
5.125 (130.18)
1.355
(34.42)
1.730
(43.94)
3.250
(82.55)
6.435 (163.44)
–
–
1.000
(9.53)
1.000
(9.53)
2.813
3.063
6.750
7.000
(71.44)
(77.80)
(171.45)
(177.80)
ACT-1-67
Cylinder with 22 (MP2) Detachable Cap Clevis
● NFPA (MP2) 22 Detachable Cap Clevis Mount
22
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-68
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 22 (MP2) Detachable Cap Clevis
Series J & EJ, NFPA Steel Air Cylinder with 22 (MP2) Detachable Cap Clevis
Y
P + Stroke
EE NPT (2)
WF
øB Bushing
øMM
LR
Supplied with
Standard Pin
(See page
ACT-11-85)
øCD
KK
Thds
MR
A
øB
KK
Thds.
A
øB
CC
Thds.
ø Rod
A
B
+.000
-.002
C
CB
CC
Std.
O.S.
CD
CW
D
Std.
O.S.
E
EE
FF
Std.
O.S.
FL
G
J
K
KK
Std.
O.S.
L
LB
LR
M
MM
Std.
O.S.
MR
P
VF
WF
XD
Y
A
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
CW
E Sq.
øB
KK
Thds.
A Deep
øMM
øB
FF
Thds.
øMM
A
C
VF
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
øB
CC
Thds.
øMM
C
Dimension
M
XD + Stroke
øMM
D
Across
Flats
CB
CW
FL
VF
Standard &
Optional Rod Ends
øB
KK
Thds.
L
G
C
øMM
A
C
VF
A
C
VF
øMM
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
11/2" Bore (38.10)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(28.58)
1.125
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(19.05)
.750
(92.08)
3.625
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(59.44)
2.340
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.750 (146.05)
6.125 (155.58)
(46.74)
1.840
(56.39)
2.220
2" Bore (50.80)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(28.58)
1.125
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(19.05)
.750
(92.08)
3.625
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(59.44)
2.340
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.750 (146.05)
6.125 (155.58)
(46.74)
1.840
(56.39)
2.220
21/2" Bore (63.50) 31/4" Bore (82.55)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(28.58)
1.125
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(19.05)
.750
(95.25)
3.750
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(62.74)
2.470
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.875 (149.23)
6.250 (158.75)
(46.74)
1.840
(56.39)
2.220
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(15.88)
.625
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(47.63)
1.875
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
(31.75)
1.250
4.250 (107.95)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(68.33)
2.690
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
7.500 (190.50)
7.750 (196.85)
(60.45)
2.380
(66.80)
2.630
Brookville, OH USA
4" Bore (101.60)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(15.88)
.625
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(47.63)
1.875
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
(31.75)
1.250
4.250 (107.95)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(68.33)
2.690
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
7.500 (190.50)
7.750 (196.85)
(60.45)
2.380
(66.80)
2.630
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (203.20)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(15.88)
.625
(20.64)
.813
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(47.63)
1.875
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
(31.75)
1.250
4.500 (114.30)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(74.68)
2.940
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
7.750 (196.85)
8.000 (203.20)
(60.45)
2.380
(66.80)
2.630
1.3/8"
1.3/8"
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(19.05)
.750
(28.58)
1.125
(38.10)
1.500
8.500 (215.90)
(19.05)
.750
13/8 – 12
13/4 – 12
(57.15)
2.250
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
(38.10)
1.500
5.125 (130.18)
(38.10)
1.500
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(30.16)
1.188
(82.55)
3.250
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.62)
1.875
9.000 (228.60)
9.250 (234.95)
(71.44)
2.813
(77.79)
3.063
Phone 937-833-4033
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(19.05)
.750
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(57.15)
2.250
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
(38.10)
1.500
5.000 (127.00)
(38.10)
1.500
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(30.16)
1.188
(79.38)
3.125
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.62)
1.875
8.875 (225.43)
9.125 (231.78)
(71.44)
2.813
(77.79)
3.063
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(19.05)
.750
(28.58)
1.125
(38.10)
1.500
7.500 (190.50)
(19.05)
.750
13/8 – 12
13/4 – 12
(57.15)
2.250
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
(38.10)
1.500
5.125 (130.18)
(38.10)
1.500
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(30.16)
1.188
(82.55)
3.250
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.62)
1.875
9.000 (228.60)
9.250 (234.95)
(71.44)
2.813
(77.79)
3.063
www.norgren.com
ACT-1-69
Cylinder with 32 (MP3) Cap Fixed Eye
● NFPA (MP3) 32 Cap Fixed Eye
32
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-70
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 32 (MP3) Cap Fixed Eye
Series J & EJ, NFPA Steel Air Cylinder with 32 (MP3) Cap Fixed Eye
Y
P + Stroke
E Sq.
WF
øB Bushing
øMM
LR
øCD
KK
Thds
MR
A
G
C
J
VF
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
CB
L
M
XC + Stroke
Standard &
Optional Rod Ends
øB
KK
Thds.
K
LB + Stroke
øB
CC
Thds.
øMM
A
øMM
A
A
C
C
VF
øB
KK
Thds.
A Deep
øB
FF
Thds.
øMM
øMM
A
C
VF
C
VF
øMM
A
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50) 31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (203.20
Std.
ø Rod
O.S.
Std.
A
O.S.
+.000 Std.
B
-.002 O.S.
Std.
C
O.S.
CB
Std.
CC
O.S.
CD
Std.
D
O.S.
E
EE
Std.
FF
O.S.
G
J
K
Std.
KK
O.S.
L
LB
LR
M
Std.
MM
O.S.
MR
P
Std.
VF
O.S.
Std.
WF
O.S.
Std.
XC
O.S.
Std.
Y
O.S.
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(19.05)
.750
(92.08)
3.625
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(59.44)
2.340
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.375 (136.53)
5.750 (146.05)
(46.74)
1.840
(56.39)
2.220
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(19.05)
.750
(92.08)
3.625
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(59.44)
2.340
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.375 (136.53)
5.750 (146.05)
(46.74)
1.840
(56.39)
2.220
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(19.05)
.750
(95.25)
3.750
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(62.74)
2.470
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.500 (139.70)
5.875 (149.23)
(46.74)
1.840
(56.39)
2.220
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
(31.75)
1.250
4.250 (107.95)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(68.33)
2.690
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.875 (174.63)
7.125 (180.98)
(60.45)
2.380
(66.80)
2.630
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(20.64)
.813
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
(31.75)
1.250
4.500 (114.30)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(74.68)
2.940
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
7.125 (180.98)
7.375 (187.33)
(60.45)
2.380
(66.80)
2.630
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
(38.10)
1.500
5.000 (127.00)
(38.10)
1.500
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(30.16)
1.188
(79.38)
3.125
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
8.125 (206.38)
8.375 (212.73)
(71.44)
2.813
(77.79)
3.063
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(28.58)
1.125
(38.10)
1.500
7.500 (190.50)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
(38.10)
1.500
5.125 (130.18)
(38.10)
1.500
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(30.16)
1.188
(82.55)
3.250
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
8.250 (209.55)
8.500 (215.90)
(71.44)
2.813
(77.79)
3.063
(34.93
1.3/8"
(44.45
1.3/4"
(41.28
1.625
(50.80
2.000
(50.78
1.999
(60.30
2.374
(15.88
.625
(19.05
.750
(38.10
1.500
11/4 – 12
11/2 – 12
(25.40
1.000
(28.58
1.125
(38.10
1.500
8.500 (215.90
(19.05
.750
13/8 – 12
13/4 – 12
(50.80
2.000
(38.10
1.500
(14.29
.563
1 – 14
11/4 – 12
(38.10
1.500
5.125 (130.18
(38.10
1.500
(25.40
1.000
(34.93
1.375
(44.45
1.750
(30.16
1.188
(82.55
3.250
(25.40
1.000
(28.58
1.125
(41.28
1.625
(47.63
1.875
8.250 (209.55
8.500 (215.90
(71.44
2.813
(77.79
3.063
Brookville, OH USA
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
(31.75)
1.250
4.250 (107.95)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(68.33)
2.690
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.875 (174.63)
7.125 (180.98)
(60.45)
2.380
(66.80)
2.630
Phone 937-833-4033
www.norgren.com
ACT-1-71
Cylinder with 32 (MP3) Cap Fixed Eye
● NFPA (MP3) 32 Cap Fixed Eye
32
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-72
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 32 (MP3) Cap Fixed Eye
Series J & EJ, NFPA Steel Air Cylinder with 32 (MP3) Cap Fixed Eye
Y
P + Stroke
E Sq.
WF
øB Bushing
øMM
LR
øCD
KK
Thds
MR
A
J
G
C
VF
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
CB
L
M
XC + Stroke
Standard &
Optional Rod Ends
øB
KK
Thds.
K
LB + Stroke
øB
CC
Thds.
øMM
A
A
øMM
A
C
C
VF
øB
KK
Thds.
A Deep
øB
FF
Thds.
øMM
øMM
øMM
A
C
VF
A
C
VF
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
C
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
CB
CC
Std.
O.S.
E
EE
FF
MR
P
VF
WF
XC
Y
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
(38.10)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
1.500
1.3/4"
1.375
1.500
1.688
10.625
1.000
13/8 – 12
13/4 – 12
(50.80)
(38.10)
(14.29)
(50.80)
(38.10)
(14.29)
2.000
1.500
.563
1 – 14
11/4 – 12
2.250
2.000
.688
1 – 14
11/4 – 12
(38.10)
(130.18)
(38.10)
(25.40)
(34.93)
(44.45)
(30.16)
(82.55)
(25.40)
(28.58)
(41.28)
(47.63)
(209.55)
(215.90)
(71.44)
(77.79)
1.500
5.125
1.500
1.000
1.375
1.750
1.188
3.250
1.000
1.125
1.625
1.875
8.250
8.500
2.813
3.063
Brookville, OH USA
(44.45)
(50.80)
(50.80)
(57.15)
(60.30)
(66.65)
(19.05)
(22.23)
(50.80)
.2"
2.000
2.250
2.374
2.624
.750
.875
2.000
12" Bore (304.80)
.2"
2.1/2"
2.250
3.000
2.724
3.124
.875
1.000
2.500
11/2 – 12
13/4 – 12
(25.40)
(28.58)
(38.10)
(215.90)
(19.05
1.000
1.125
1.500
8.500
.750
13/8 – 12
13/4 – 12
1.500
5.125
1.500
1.000
1.375
1.750
1.188
3.250
1.000
1.125
1.625
1.875
8.250
8.500
2.813
3.063
10" Bore (254.00)
11/4 – 12
11/2 – 12
(25.40)
(28.58)
(38.10)
(190.50)
(19.05)
1.000
1.125
1.500
7.500
.750
Std.
O.S.
Std.
O.S.
8" Bore (203.20)
1.3/8"
11/4 – 12
11/2 – 12
2.000
1.500
.563
L
LB
LR
M
MM
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
(38.10)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
1.500
Std.
O.S.
G
J
K
KK
1.3/8"
Std.
O.S.
CD
D
7" Bore (177.80)
(38.10)
(130.18)
(38.10)
(25.40)
(34.93)
(44.45)
(30.16)
(82.55)
(25.40)
(28.58)
(41.28)
(47.63)
(209.55)
(215.90)
(71.44)
(77.79)
2.125
6.375
1.875
1.375
1.750
2.000
1.625
4.125
1.125
1.125
1.875
2.000
10.375
10.500
3.125
3.250
(34.93)
(38.10)
(42.86)
(269.88)
(25.40
13/4 – 12
2 – 12
(57.15)
(50.80)
(17.46)
11/4 – 12
11/2 – 12
(53.98)
(161.93)
(47.63)
(34.93)
(44.45)
(50.80)
(41.28)
(104.78)
(28.58)
(28.58)
(47.63)
(50.80)
(263.53)
(266.70)
(79.38)
(82.55)
Phone 937-833-4033
(50.80)
(63.50)
(57.15)
(76.20)
(66.65)
(79.35)
(22.23)
(25.40)
(63.50)
13/4 – 12
21/4 – 12
1.750
1.688
2.063
12.750
1.000
(44.45)
(42.86)
(52.39)
(323.85)
(25.40)
2 – 12
21/2 – 12
(57.15)
(50.80)
(17.46)
2.250
2.000
.688
11/2 – 12
17/8 – 12
2.250
6.875
2.125
1.750
2.000
2.500
2.125
4.625
1.125
1.250
2.000
2.250
11.125
11.375
3.250
3.500
(57.15)
(174.63)
(53.98)
(44.45)
(50.80)
(63.50)
(53.98)
(117.48)
(28.58)
(31.75)
(50.80)
(57.15)
(282.58)
(288.93)
(82.55)
(88.90)
www.norgren.com
ACT-1-73
Cylinder with 42 (MP4) Detachable Cap Eye
● NFPA (MP4) 42 Detachable Cap Eye Mount
42
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-74
–
–
Brookville, OH USA
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
1
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 42 (MP4) Detachable Cap Eye
Series J & EJ, NFPA Steel Air Cylinder with 42 (MP4) Detachable Cap Eye
Y
P + Stroke
E Sq.
WF
øB Bushing
øMM
LR
øCD
KK
Thds
MR
A
G
C
øB
KK
Thds.
A
M
XD + Stroke
øB
CC
Thds.
øMM
D
Across
Flats
CB
FL
VF
Standard &
Optional Rod Ends
øB
KK
Thds.
L
øB
CC
Thds.
øMM
A
VF
øMM
øB
FF
Thds.
øMM
A
C
C
øB
KK
Thds.
A Deep
øMM
A
C
VF
C
VF
øMM
A
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
Std.
ø Rod
O.S.
Std.
A
O.S.
+.000 Std.
B
-.002 O.S.
Std.
C
O.S.
CB
Std.
CC
O.S.
CD
Std.
D
O.S.
E
EE
Std.
FF
O.S.
FL
G
J
K
Std.
KK
O.S.
L
LB
LR
M
Std.
MM
O.S.
MR
P
Std.
VF
O.S.
Std.
WF
O.S.
Std.
XD
O.S.
Std.
Y
O.S.
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(20.64)
.813
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(28.58)
1.125
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(19.05)
.750
(92.08)
3.625
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(59.44)
2.340
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.750 (146.05)
6.125 (155.58)
(46.74)
1.840
(56.39)
2.220
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(20.64)
.813
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(28.58)
1.125
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(19.05)
.750
(92.08)
3.625
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(59.44)
2.340
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.750 (146.05)
6.125 (155.58)
(46.74)
1.840
(56.39)
2.220
21/2" Bore (63.50) 31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (203.20)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
(19.05)
.750
1/2 – 20
7/8 – 14
(12.70)
.500
(12.70)
.500
(20.64)
.813
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(28.58)
1.125
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(19.05)
.750
(95.25)
3.750
(19.05)
.750
(12.70)
.500
(15.88)
.625
(25.40)
1.000
(15.88)
.625
(62.74)
2.470
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.875 (149.23)
6.250 (158.75)
(46.74)
1.840
(56.39)
2.220
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(20.64)
.813
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(47.63)
1.875
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
(31.75)
1.250
4.250 (107.95)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(68.33)
2.690
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
7.500 (190.50)
7.750 (196.85)
(60.45)
2.380
(66.80)
2.630
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(20.64)
.813
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(47.63)
1.875
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
(31.75)
1.250
4.500 (114.30)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(74.68)
2.940
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
7.750 (196.85)
8.000 (203.20)
(60.45)
2.380
(66.80)
2.630
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(57.15)
2.250
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
(38.10)
1.500
5.000 (127.00)
(38.10)
1.500
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(30.16)
1.188
(79.38)
3.125
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.62)
1.875
8.875 (225.43)
9.125 (231.78)
(71.44)
2.813
(77.79)
3.063
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(28.58)
1.125
(38.10)
1.500
7.500 (190.50)
(19.05)
.750
13/8 – 12
13/4 – 12
(57.15)
2.250
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
(38.10)
1.500
5.125 (130.18)
(38.10)
1.500
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(30.16)
1.188
(82.55)
3.250
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.62)
1.875
9.000 (228.60)
9.250 (234.95)
(71.44)
2.813
(77.79)
3.063
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(28.58)
1.125
(38.10)
1.500
8.500 (215.90)
(19.05)
.750
13/8 – 12
13/4 – 12
(57.15)
2.250
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
(38.10)
1.500
5.125 (130.18)
(38.10)
1.500
(25.40)
1.000
(34.93)
1.375
(44.45)
1.750
(30.16)
1.188
(82.55)
3.250
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.62)
1.875
9.000 (228.60)
9.250 (234.95)
(71.44)
2.813
(77.79)
3.063
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 – 14
11/4 – 12
(19.05)
.750
(20.64)
.813
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(47.63)
1.875
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
(31.75)
1.250
4.250 (107.95)
(31.75)
1.250
(19.05)
.750
(25.40)
1.000
(34.93)
1.375
(23.81)
.938
(68.33)
2.690
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
7.500 (190.50)
7.750 (196.85)
(60.45)
2.380
(66.80)
2.630
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-75
Series A & EA Aluminum Air Cylinders (ø1-1/2 to 8")
Series J & EJ Steel Air Cylinders (ø1-1/2 to 12")
Cylinder with 52 (Not NFPA) Spherical Bearing
● 52 (Not NFPA) Spherical Bearing Mount
52
A
EA
J
EJ
–
–
Series A Cylinder
Series EA Cylinder
Series J Cylinder
Series EJ Cylinder
HR
MS
Metal Rod Scraper
PS
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
09 Side Lugs (MS2)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
ACT-1-76
–
–
Brookville, OH USA
1
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Phone 937-833-4033
4
2
3
www.norgren.com
Series A & EA, NFPA Aluminum Air Cylinder with 52 (Not NFPA) Spherical Bearing
Series J & EJ, NFPA Steel Air Cylinder with 52 (Not NFPA) Spherical Bearing
XR + Stroke
EE NPT (2)
Y
P + Stroke
WF
øB Bushing
FT
øMM
KK
Thds
øDC
KL
A
D
(Flats)
R
J
G
C
AM
K
BI
LB + Stroke
VF
E Sq.
XC + Stroke
øB
KK
Thds.
øB
KK
Thds.
øB
CC
Thds.
øMM
A
D
Across
Flats
øMM
A
VF
Std.
O.S.
FT
G
J
K
KK
Std.
O.S.
KL
LB
MM
Std.
O.S.
P
R
VF
WF
XC
XR
Y
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
C
VF
C
VF
C
VF
VF
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(19.05)
.750
(28.55)
1.124
(38.08)
1.499
(11.11)
.438
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(12.70)
.500
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(15.88)
.625
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(24.61)
.969
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.375 (136.53)
5.750 (146.05)
6.125 (155.58)
6.500 (165.10)
(46.74)
1.840
(56.39)
2.220
FF
C
øMM
A
Type 2 Studded
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(19.05)
.750
(28.55)
1.124
(38.08)
1.499
(11.11)
.438
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
.500 Std.(12.70)
(22.23)
.875
(12.70)
.500
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(15.88)
.625
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(24.61)
.969
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.375 (136.53)
5.750 (146.05)
6.125 (155.58)
6.500 (165.10)
(46.74)
1.840
(56.39)
2.220
O.S.
øMM
Type 1 Studded
Std.
ø Rod
O.S.
Std.
A
O.S.
AM
+.000 Std.
B
-.002 O.S.
BI
Std.
C
O.S.
Std.
CC
O.S.
DC
E
EE
øMM
Type 1 Solid
2" Bore (50.80)
+.000
øB
FF
Thds.
A
VF
11/2" Bore (38.10)
-.001
øB
KK
Thds.
A Deep
øMM
A
C
C
Dimension
D
øB
CC
Thds.
21/2" Bore (63.50) 31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (203.20)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(19.05)
.750
(28.55)
1.124
(38.08)
1.499
(11.11)
.438
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(12.70)
.500
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(15.88)
.625
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(24.61)
.969
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
5.500 (139.70)
5.875 (149.23)
6.250 (158.75)
6.625 (168.28)
(46.74)
1.840
(56.39)
2.220
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(25.40)
1.000
(38.08)
1.499
(50.78)
1.999
(16.67)
.656
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
(19.05)
.750
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(25.40)
1.000
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
(35.71)
1.406
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.40)
3.323
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.875 (174.63)
7.125 (180.98)
7.875 (200.03)
8.125 (206.38)
(60.45)
2.380
(66.80)
2.630
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(25.40)
1.000
(38.08)
1.499
(50.78)
1.999
(16.67)
.656
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
(19.05)
.750
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(25.40)
1.000
(44.45)
1.750
(31.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
(35.71)
1.406
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(74.68)
2.940
4.101 (104.16)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
7.125 (180.98)
7.375 (187.33)
8.125 (206.38)
8.375 (212.73)
(60.45)
2.380
(66.80)
2.630
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(31.75)
1.250
(50.78)
1.999
(60.30)
2.374
(22.23)
.875
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
(25.40)
1.000
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(31.75)
1.250
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
(43.66)
1.719
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
(79.38)
3.125
4.879 (123.92)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.62)
1.875
8.125 (206.38)
8.375 (212.73)
9.375 (238.13)
9.625 (244.48)
(71.44)
2.813
(77.79)
3.063
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(31.75)
1.250
(50.78)
1.999
(60.30)
2.374
(22.23)
.875
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
(25.40)
1.000
7.500 (190.50)
(19.05)
.750
13/8 – 12
13/4 – 12
(31.75)
1.250
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
(43.66)
1.719
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
(82.55)
3.250
5.730 (145.54)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.62)
1.875
8.250 (209.55)
8.500 (215.90)
9.500 (241.30)
9.750 (247.65)
(71.44)
2.813
(77.79)
3.063
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(31.75)
1.250
(50.78)
1.999
(60.30)
2.374
(22.23)
.875
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
(25.40)
1.000
8.500 (215.90)
(19.05)
.750
13/8 – 12
13/4 – 12
(31.75)
1.250
(50.80)
2.000
(38.10)
1.500
(14.29)
.563
1 – 14
11/4 – 12
(43.66)
1.719
5.125 (130.18)
(34.93)
1.375
(44.45)
1.750
(82.55)
3.250
6.435 (163.44)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.62)
1.875
8.250 (209.55)
8.500 (215.90)
9.500 (241.30)
9.750 (247.65)
(71.44)
2.813
(77.79)
3.063
.1"
(25.40)
1.3/8"
(34.93)
(28.58)
1.125
(41.28)
1.625
(25.40)
1.000
(38.08)
1.499
(50.78)
1.999
(16.67)
.656
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
(19.05)
.750
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(25.40)
1.000
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
(35.71)
1.406
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
6.875 (174.63)
7.125 (180.98)
7.875 (200.03)
8.125 (206.38)
(60.45)
2.380
(66.80)
2.630
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-77
Series A & EA Aluminum Air Cylinders (ø1-1/2 to 6")
Cylinder with 60 (Not NFPA) Base Bar
● 60 Base (Not NFPA) Bar Mount
● Series A Cylinders rated to 250 PSI air,
Series EA Cylinders rated to 250 PSI air only.
60
A
EA
–
–
–
–
Series A Cylinder
Series EA Cylinder
Additional Options – order alphabetically – More on page ACT-1-95.
HR
MS
Metal Rod Scraper
PS
Magnetic Piston
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
03 Head Square (ME3) – 7" & 8" Bores
04 Cap Square (ME4) – 7" & 8" Bores
7R Head Trunnion (MT1)
8R Cap Trunnion (MT2)
09 Side Lugs (MS2)
60 Base Bar (Not NFPA)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Standard with EA
5/8"
A
Standard on 11/2", 2", 21/2"
B
1"
Oversized on 11/2", 2", 21/2"
C
13/8"
D
13/4" Oversized on 6", 7", 8"
Cushion in Cap
3 None
9 Decel Cushion
†
Standard with EA
See page ACT-1-96 for complete instructions on how to order cylinders.
ACT-1-78
Brookville, OH USA
Phone 937-833-4033
1
4
2
3
www.norgren.com
Series A, NFPA Aluminum Air Cylinders with 60 (Not NFPA) Base Bar
EE NPT (2)
Y
E Sq.
R
P + Stroke
WF
øB Bushing
øMM
KK
Thds
øSB
SH
A
ST
D
(Flats)
TS
SW
Standard &
Optional Rod Ends
øMM
A
A
D
Across
Flats
VF
A
VF
C
VF
C
VF
C
VF
VF
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
-.002
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
MM
Std.
O.S.
P
R
SB
SH
SS
ST
SU
SW
TS
US
ZB
A
C
Type 3 Female
C
Y
øMM
øMM
Type 2 Solid
+.000
XS
øMM
Type 2 Studded
A
WF
øB
FF
Thds.
øB
KK
Thds.
A Deep
Type 1 Studded
ø Rod
VF
K
Type 1 Solid
Dimension
B
SU
LB + Stroke
SS + Stroke
ZB + Stroke
øMM
A
C
C
SW
SU
øB
CC
Thds.
øB
CC
Thds.
øMM
G
VF
XS
US
øB
KK
Thds.
øB
KK
Thds.
C
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50)
31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(6.35)
.250
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
(11.11)
.438
(31.75)
1.250
(73.03)
2.875
(6.35)
.250
(28.58)
1.125
(9.53)
.375
(69.85)
2.750
(88.90)
3.500
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(34.93)
1.375
(44.45)
1.750
(46.74)
1.840
(56.39)
2.220
4.875 (123.83)
5.250 (133.35)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(92.08)
3.625
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
(11.11)
.438
(38.10)
1.500
(73.03)
2.875
(6.35)
.250
(28.58)
1.125
(9.53)
.375
(82.55)
3.250
4.000 (101.60)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(34.93)
1.375
(44.45)
1.750
(46.74)
1.840
(56.39)
2.220
4.938 (125.41)
5.313 (134.94)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(25.40)
1.000
(7.94)
.313
7/16 – 20
3/4 – 16
(95.25)
3.750
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
(11.11)
.438
(47.63)
1.875
(76.20)
3.000
(9.53)
.375
(28.58)
1.125
(9.53)
.375
(95.25)
3.750
4.500 (114.30)
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(34.93)
1.375
(44.45)
1.750
(46.74)
1.840
(56.39)
2.220
5.063 (128.59)
5.438 (138.11)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
(14.29)
.563
(60.33)
2.375
(82.55)
3.250
(12.70)
.500
(31.75)
1.250
(12.70)
.500
4.750 (120.65)
5.750 (146.05)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(47.63)
1.875
(53.98)
2.125
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
4.500 (144.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(9.53)
.375
3/4 – 16
1 – 14
4.250 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.40)
3.323
(14.29)
.563
(69.85)
2.750
(82.55)
3.250
(12.70)
.500
(31.75)
1.250
(12.70)
.500
5.500 (139.70)
6.500 (165.10)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(47.63)
1.875
(53.98)
2.125
(60.45)
2.380
(66.80)
2.630
6.000 (152.40)
6.250 (158.75)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(41.75)
1.250
(11.11)
.438
3/4 – 16
1 – 14
4.500 (114.30)
(25.40)
1.000
(34.93)
1.375
(74.68)
2.940
4.101 (104.16)
(20.64)
.813
(88.90)
3.500
(79.38)
3.125
(19.05)
.750
(26.99)
1.063
(17.44)
.688
6.875 (174.63)
8.250 (209.55)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(52.39)
2.063
(58.74)
2.313
(60.45)
2.380
(66.80)
2.630
6.313 (160.34)
6.563 (166.69)
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(11.11)
.438
1 – 14
11/4 – 12
5.000 (127.00)
(34.93)
1.375
(44.45)
1.750
(79.38)
3.125
4.879 (123.92)
(20.64)
.813
4.000 (101.60)
(92.08)
3.625
(19.05)
.750
(33.34)
1.313
(17.44)
.688
7.875 (200.03)
9.250 (234.95)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(58.74)
2.313
(65.09)
2.563
(71.44)
2.813
(77.79)
3.063
7.063 (179.39)
7.313 (185.74)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-79
Series DA & EDA NFPA Aluminum Air Cylinders (ø1-1/2 to 8")
Series DJ & EDJ, NFPA Steel Air Cylinders (ø1-1/2 to 12")
Double Rod End Cylinder with 05 (MX0) Basic
● NFPA (MX0) 05 Basic with Double Rod End Cylinder
● Series DA & EDA Cylinders rated to 250 PSI air,
Series EDA Cylinders rated to 250 PSI air only.
05
–
–
–
–
DA
EDA
DJ
EDJ
Additional Options – order alphabetically – More on page ACT-1-95.
HR
MS
Metal Rod Scraper
PS
Magnetic Piston
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Series DA Double Rod End Cylinder
Series EDA Double Rod End Cylinder
Series DJ Double Rod End Cylinder
Series EDJ Double Rod End Cylinder
Mounting Options
7R Head Trunnion (MT1)
09 Side Lugs (MS2)
60 Base Bar (Not NFPA) - A & EA Only
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Head
3 None
9 Decel Cushion
†
Standard with EDA & EDJ
Cushion in Cap
3 None
9 Decel Cushion
†
NOTE: Double Rod End cylinders have a (Head Rod End)
and the opposite end cap is considered the (Cap Rod End).
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
3
C** 1 /8"
D** 13/4" Oversized on 6", 7", 8"
Standard on 12"
E
2"
Oversized on 10"
F
21/2 Oversized on 10", 12"
1
4
3
NOTE: A Port and a Cushion
Adjustment cannot be in the same
position.
See page ACT-1-96 for complete instructions on how to order cylinders.
ACT-1-80
Brookville, OH USA
Phone 937-833-4033
2
www.norgren.com
Series DA & EDA, NFPA Aluminum Double Rod End Air Cylinder with 05 (MX0) Basic
Series DJ & EDJ, NFPA Steel Double Rod End Air Cylinder with 05 (MX0) Basic
Y
EE NPT (2)
Y + Stroke
P + Stroke
WF
øB Bushing
øB
Bushing
øMM
øMM
KK
Thds.
KK
Thds
C + Stroke
A
D
(Flats)
G
G
K
C
R
LD + Stroke
VF
E Sq.
A
ZL + Stroke
ZM + 2x Stroke
Standard &
Optional Rod Ends
øB
KK
Thds.
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
A
øB
CC
Thds.
øMM
A
øMM
VF
øMM
A
C
VF
øB
FF
Thds.
øMM
A
C
C
øB
KK
Thds.
A Deep
C
VF
øMM
A
C
C
VF
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
Std.
ø Rod
O.S.
Std.
A
O.S.
+.000 Std.
B
-.002 O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
EE
Std.
FF
O.S.
G
K
Std.
KK
O.S.
LD
Std.
MM
O.S.
P
R
Std.
VF
O.S.
Std.
WF
O.S.
Std.
Y
O.S.
Std.
ZL
O.S.
Std.
ZM
O.S.
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(50.80)
2.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(6.35)
.250
7/16 – 20
3/4 – 16
(92.08)
4.125
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(36.27)
1.428
(15.88)
.625
(22.23)
.875
1.000 (25.40)
1.375 (34.93)
(46.74)
1.840
(56.39)
2.220
5.375 (136.53)
5.750 (146.05)
6.125 (155.58)
6.875 (174.63)
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(63.50)
2.500
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(7.94)
.313
7/16 – 20
3/4 – 16
(92.08)
4.125
(15.88)
.625
(25.40)
1.000
(59.44)
2.340
(46.68)
1.838
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(46.74)
1.840
(56.39)
2.220
5.438 (138.11)
5.813 (147.64)
6.125 (155.58)
6.875 (174.63)
21/2" Bore (63.50) 31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
7" Bore (177.80)
8" Bore (203.2
.5/8"
(15.88)
.1"
(25.40)
(19.05)
.750
(28.58)
1.125
(28.55)
1.124
(38.08)
1.499
(9.53)
.375
(12.70)
.500
1/2 – 20
7/8 – 14
(12.70)
.500
(22.23)
.875
(76.20)
3.000
(9.53)
.375
5/8 – 18
1 – 14
(38.10)
1.500
(7.94)
.313
7/16 – 20
3/4 – 16
(95.25)
4.250
(15.88)
.625
(25.40)
1.000
(62.74)
2.470
(55.67)
2.192
(15.88)
.625
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(46.74)
1.840
(56.39)
2.220
5.563 (141.29)
5.938 (150.81)
6.250 (158.75)
7.000 (177.80)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
4.500 (114.30)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(9.53)
.375
3/4 – 16
1 – 14
4.750 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(84.40)
3.323
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(60.45)
2.380
(66.80)
2.630
6.500 (165.10)
6.750 (171.45)
7.500 (190.50)
8.000 (203.20)
.1"
(25.40)
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
5.500 (139.70)
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(11.11)
.438
3/4 – 16
1 – 14
5.000 (127.00)
(25.40)
1.000
(34.93)
1.375
(74.68)
2.940
4.101 (104.16)
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(60.45)
2.380
(66.80)
2.630
6.813 (174.04)
7.063 (178.47)
7.500 (190.50)
8.000 (203.20)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(11.11)
.438
1 – 14
11/4 – 12
5.500 (139.70)
(34.93)
1.375
(44.45)
1.750
(79.38)
3.125
4.879 (123.92)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
7.563 (192.09)
7.813 (198.44)
8.750 (222.25)
9.250 (234.95)
1.3/8"
(34.93)
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.78)
1.999
(60.30)
2.374
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
7.500 (190.50)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(14.29)
.563
1 – 14
11/4 – 12
5.625 (142.88)
(34.93)
1.375
(44.45)
1.750
(82.55)
3.250
5.730 (145.54)
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
(71.44)
2.813
(77.79)
3.063
7.813 (198.44)
8.125 (206.38)
8.875 (225.43)
9.375 (238.13)
1.3/8"
(34.9
(44.4
1.3/4"
(41.2
1.625
(50.8
2.000
(50.7
1.999
(60.3
2.374
(15.8
.625
(19.0
.750
11/4 – 12
11/2 – 12
(28.5
1.125
(38.1
1.500
8.500 (215.9
(19.0
.750
13/8 – 12
13/4 – 12
(50.8
2.000
(14.2
.563
1 – 14
11/4 – 12
5.625 (142.8
(34.9
1.375
(44.4
1.750
(82.5
3.250
6.435 (163.4
(25.4
1.000
(28.5
1.125
(41.2
1.625
(47.6
1.875
(71.4
2.813
(77.7
3.063
7.813 (198.4
8.125 (206.3
8.875 (225.4
9.375 (238.1
Brookville, OH USA
.1"
(25.40)
1.3/8"
(34.93)
(28.58)
1.125
(41.28)
1.625
(38.08)
1.499
(50.78)
1.999
(12.70)
.500
(15.88)
.625
7/8 – 14
11/4 – 12
(22.23)
.875
(28.58)
1.125
(95.25)
3.750
(12.70)
.500
1 – 14
13/8 – 12
(44.45)
1.750
(9.53)
.375
3/4 – 16
1 – 14
4.750 (107.95)
(25.40)
1.000
(34.93)
1.375
(68.33)
2.690
(70.05)
2.758
(22.23)
.875
(25.40)
1.000
(34.93)
1.375
(41.28)
1.625
(60.45)
2.380
(66.80)
2.630
6.500 (165.10)
6.750 (171.45)
7.500 (190.50)
8.000 (203.20)
Phone 937-833-4033
www.norgren.com
ACT-1-81
Series DA & EDA, NFPA Aluminum Air Cylinders (ø1-1/2 to 8")
Series DJ & EDJ, NFPA Steel Air Cylinders (ø1-1/2 to 12")
● NFPA (MX0) 05 Basic with Double Rod End Cylinder
available in 7" thru 12" bore sizes.
● Series DJ & EDJ Cylinders rated to 250 PSI air,
Series EDJ Cylinders rated to 250 PSI air only.
05
DA
EDA
DJ
EDJ
–
–
Series DA Double Rod End Cylinder
Series EDA Double Rod End Cylinder
Series DJ Double Rod End Cylinder
Series EDJ Double Rod End Cylinder
HR
MS
Metal Rod Scraper
PS
Magnetic Piston – includes aluminum tube option
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
03 Head Square (ME3) – 7" to 12" Bores
07 Head Trunnion (MT1)
09 Side Lugs (MS2)
60 Base Bar (Not NPFA - A & EA Only)
Cushion in Head
3 None
9 Decel Cushion
†
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
Cushion in Cap
3 None
9 Decel Cushion
†
NOTE: Double Rod End cylinders have a (Head Rod End)
and the opposite end cap is considered the (Cap Rod End).
ACT-1-82
–
–
Brookville, OH USA
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard on 10"
3
D** 1 /4"
Standard on 12"
E
2"
Oversized on 10"
F
1
4
3
Adjustment cannot be in the same
position.
Phone 937-833-4033
2
www.norgren.com
Series DA & EDA, NFPA Aluminum Double Rod End Air Cylinder with 05 (MX0) Basic
Series DJ & EDJ, NFPA Steel Double Rod End Air Cylinder with 05 (MX0) Basic
Y
EE NPT (2)
Y + Stroke
P + Stroke
WF
øB Bushing
øB
Bushing
øMM
øMM
KK
Thds.
KK
Thds
A
C + Stroke
A
D
(Flats)
G
G
K
C
R
LD + Stroke
VF
E Sq.
ZL + Stroke
ZM + 2x Stroke
Standard &
Optional Rod Ends
øB
KK
Thds.
øB
KK
Thds.
øB
CC
Thds.
øMM
D
Across
Flats
øB
CC
Thds.
øMM
A
A
øMM
A
C
C
VF
øB
KK
Thds.
A Deep
øMM
øMM
øMM
A
C
VF
øB
FF
Thds.
A
C
VF
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
Male Optional)
Male Optional)
(Optional)
(Full Thread
Male Optional)
Dimension
ø Rod
A
B
+.000
-.002
C
CC
D
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
E
EE
FF
Std.
O.S.
WF
Y
ZL
ZM
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
Std.
O.S.
8" Bore (203.20)
1.3/8"
1.500
1.688
10.625
1.000
13/8 – 12
13/4 – 12
(50.80)
(14.29)
(50.80)
(14.29)
2.000
.563
1 – 14
11/4 – 12
2.250
.688
1 – 14
11/4 – 12
(142.88)
(34.93)
(44.45)
(82.55)
(145.54)
(25.40)
(28.58)
(41.28)
(47.63)
(71.44)
(77.79)
(198.44)
(206.38)
(225.43)
(238.13)
5.625
1.375
1.750
3.250
6.442
1.000
1.125
1.625
1.875
2.813
3.063
7.813
8.125
8.875
9.375
Brookville, OH USA
(44.45)
(50.80)
(50.80)
(57.15)
(60.30)
(66.65)
(19.05)
(22.23)
.2"
2.000
2.250
2.374
2.624
.750
.875
12" Bore (304.80)
(142.88)
(34.93)
(44.45)
(82.55)
(163.63)
(25.40)
(28.58)
(41.28)
(47.63)
(71.44)
(77.79)
(198.44)
(206.38)
(225.43)
(238.13)
6.625
1.750
2.000
4.125
7.969
1.125
1.125
1.875
2.000
3.125
3.250
10.375
10.625
9.250
9.375
(38.10)
(42.86)
(269.88)
(25.40)
13/4 – 12
2 – 12
(57.15)
(17.46)
11/4 – 12
11/2 – 12
(168.28)
(44.45)
(50.80)
(104.78)
(202.41)
(28.58)
(28.58)
(47.63)
(50.80)
(79.38)
(82.55)
(263.53)
(168.28)
(234.95)
(238.13)
Phone 937-833-4033
(50.80)
(63.50)
(57.15)
(76.20)
(66.65)
(79.35)
(22.23)
(25.40)
.2"
2.1/2"
2.250
3.000
2.624
3.124
.875
1.000
11/2 – 12
13/4 – 12
(28.58)
(38.10)
(215.90)
(19.05)
1.125
1.500
8.500
.750
13/8 – 12
13/4 – 12
5.625
1.375
1.750
3.250
5.730
1.000
1.125
1.625
1.875
2.813
3.063
7.813
8.125
8.875
9.375
10" Bore (254.00)
1.3/4"
11/4 – 12
11/2 – 12
(28.58)
(38.10)
(190.50)
(19.05)
1.125
1.500
7.500
.750
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
11/4 – 12
11/2 – 12
Std.
O.S.
P
R
VF
(34.93)
(44.45)
(41.28)
(50.80)
(50.78)
(60.30)
(15.88)
(19.05)
1.3/4"
1.625
2.000
1.999
2.374
.625
.750
2.000
.563
LD
MM
1.3/8"
Std.
O.S.
G
K
KK
7" Bore (177.80)
13/4 – 12
21/4 – 12
(42.86)
(52.39)
(323.85)
(25.40)
1.688
2.063
12.750
1.000
2 – 12
21/2 – 12
2.250
.688
(57.15)
(17.46)
11/2 – 12
17/8 – 12
(180.98)
7.125
(50.80)
2.000
(63.50)
2.500
(117.48)
4.625
(238.92)
9.406
(28.58)
1.125
(31.75)
1.250
(50.80)
2.000
(57.15)
2.250
(82.55)
3.250
(88.90)
3.500
(282.58)
11.125
(295.28)
11.625
(250.83)
9.675
(263.53)
10.375
www.norgren.com
ACT-1-83
Series A & EA, NFPA Aluminum Air Cylinders (ø1-1/2" to 8") Accessories
Series J & EJ, NFPA Steel Air Cylinders (ø1-1/2" to 12") Accessories
NFPA Rod Clevis
ER Radius
CW
Rod Clevis Rod Clevis Assy.
49028
49028A
49029
49029A
49097
49097A
49030
49030A
49098
49098A
49032
49032A
49033
49033A
49099
49099A
49034
49034A
49100
49100A
49036
49036A
49101
49101A
49102
49102A
49103
49103A
CB
CW
øCD
L
CE
KK Thds.
CH Across
Hex Flats
Note: Rod Clevis Assembly 49102A and 49103A are
supplied with NFPA Pin. All others are with Standard Pin
KK
7/16 – 20
1/2 – 20
5/8 – 18
3/4 – 16
7/8 – 14
1 – 14
11/4 – 12
13/8 – 12
11/2 – 12
13/4 – 12
17/8 – 12
2 – 12
21/4 – 12
21/2 – 12
.750
.750
.750
1.250
1.250
1.500
2.000
2.000
2.500
2.500
2.500
2.500
3.000
3.000
CB
(19.05)
(19.05)
(19.05)
(31.75)
(31.75)
(38.10)
(50.80)
(50.80)
(63.50)
(63.50)
(63.50)
(63.50)
(76.20)
(76.20)
CD
.500 (12.70)
.500 (12.70)
.500 (12.70)
.750 (19.05)
.750 (19.05)
1.000 (25.40)
1.375 (34.93)
1.375 (34.93)
1.750 (44.45)
1.750 (44.45)
2.000 (50.80)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
CE
1.500 (38.10)
1.500 (38.10)
1.500 (38.10)
2.375 (60.33)
2.375 (60.33)
3.125 (79.38)
4.125 (104.78)
4.125 (104.78)
4.500(114.30)
4.500(114.30)
5.500(139.70)
5.500(139.70)
6.500(165.10)
6.750(171.45)
CH
1.000 (25.40)
1.000 (25.40)
1.000 (25.40)
1.250 (31.75)
1.250 (31.75)
1.500 (38.10)
2.000 (50.80)
2.000 (50.80)
2.375 (60.33)
2.375 (60.33)
2.937 (74.60)
2.937 (74.60)
3.500 (88.90)
3.875 (98.45)
CW
.500 (12.70)
.500 (12.70)
.500 (12.70)
.625 (15.88)
.625 (15.88)
.750 (19.05)
1.000 (25.40)
1.000 (25.40)
1.250 (31.75)
1.250 (31.75)
1.250 (31.75)
1.250 (31.75)
1.500 (38.10)
1.500 (38.10)
ER
.500 (12.70)
.500 (12.70)
.500 (12.70)
.750 (19.05)
.750 (19.05)
1.000 (25.40)
1.375 (34.93)
1.000 (25.40)
1.750 (44.45)
1.750 (44.45)
2.000 (50.80)
2.000 (50.80)
2.750 (69.85)
2.750 (69.85)
.750
.750
.750
1.250
1.250
1.500
2.125
2.125
2.250
2.250
2.500
2.500
3.000
3.250
L
(19.05)
(19.05)
(19.05)
(31.75)
(31.75)
(38.10)
(53.98)
(53.98)
(57.15)
(57.15)
(63.50)
(63.50)
(76.20)
(82.55)
Small Rod Clevis & Jam Nut
N
CW
CB
CW
Rod Clevis Rod Clevis Assy.
49218
49218A
49219
49219A
øCD
L
CE
KK
1/2 – 20
3/4 – 16
CB
.500 (12.70)
.750 (19.05)
CD
CE
CH
.500 (12.70) 1.375 (34.93) 1.000 (25.40)
.750 (19.05) 1.750 (44.45) 1.500 (38.10)
CW
L
.250 (6.35) .750 (19.05)
.375 (9.53) 1.000 (25.40)
N
.375 (9.53)
.500 (12.70)
CH
KK Thds.
Note: Rod Clevis Assembly is supplied with Jam Nut and Standard Pin.
Rod Jam Nut
KK Thds.
KK
AF
H
KK
AF
H
H
AF
NFPA Rod Eye
CD
CD
ER Radius
CD
52025
7/16 – 20
.688 (17.46)
.250
(6.35)
52026
1/2 – 20
.750 (19.05)
.313
(7.94)
52027
5/8 – 18
.938 (23.81)
.375
(9.53)
52010
3/4 – 16
1.125 (28.58)
.422 (10.72)
52029
7/8 – 14
1.313 (33.34)
.484 (12.30)
52030
1 – 14
1.500 (38.10)
.547 (13.89)
52085
11/4 – 12
1.875 (47.63)
.719 (18.26)
52092
52068
13/8 – 12
11/2 – 12
2.063 (53.39) 2.250 (57.15)
.781 (19.84) .844 (21.43)
52082
13/4 – 12
2.625 (66.68)
.969 (24.61)
52070
17/8 – 12
2.938 (74.61)
1.031 (26.19)
52093
2 – 12
3.125 (79.38)
1.094 (27.78)
52083
21/4 – 12
3.500 (88.90)
1.203 (30.56)
52075
21/2 – 12
3.875 (98.43)
1.453 (36.91)
Rod Eye
49015
49014
49091
49013
49092
49011
49010
49093
49009
49094
49007
49095
49062
49096
CB
øCD
CE
A
KK Thds.
Note: Rod Eye Assembly 49062A and 49096A are supplied
with NFPA Pin. All others are supplied with Standard Pin
Spherical Rod Eye
W
øD
H
a˚ Clevis
Mounted
øB
A
Zerk
Fitting
C
KK Thds.
K
ACT-1-84
Rod Eye Assy.
49015A
49014A
49091A
49013A
49092A
49011A
49010A
49093A
49009A
49094A
49007A
49095A
49062A
49096A
J
Brookville, OH USA
KK
a°
A
B
C
D
H
J
K
W
KK
7/16 – 20
1/2 – 20
5/8 – 18
3/4 – 16
7/8 – 14
1 – 14
11/4 – 12
13/8 – 12
11/2 – 12
13/4 – 12
17/8 – 12
2 – 12
21/4 – 12
21/2 – 12
Spherical Rod Eye
Spherical Rod Eye Assy.
Bore
UNF-2B
Misalignment Angle
± .015
+ .0025 / -.0005
+ .062/ -.031
± .010
Reference
± .010
± .010
+ .000 / -.005
.750
.750
.750
1.125
1.125
1.625
2.000
1.625
2.250
2.250
3.000
2.250
3.000
3.000
A
(19.05)
(19.05)
(19.05)
(28.58)
(28.58)
(41.28)
(50.80)
(41.28)
(57.15)
(57.15)
(76.20)
(57.15)
(76.20)
(76.20)
.750
.750
1.250
1.250
1.250
1.500
2.000
2.000
2.500
2.500
2.500
2.500
3.000
3.000
CB
(19.05)
(19.05)
(31.75)
(31.75)
(31.75)
(38.10)
(50.80)
(50.80)
(63.50)
(63.50)
(63.50)
(63.50)
(76.20)
(76.20)
49220
49220A
11/2, 2 & 21/2
1/2 – 20
12
2.125
(53.98)
.500
(12.70)
1.063
(26.99)
1.313
(33.34)
.453
(11.49)
.750
(19.05)
.875
(22.23)
.625
(15.88)
Phone 937-833-4033
CD
.500 (12.70)
.500 (12.70)
.750 (19.05)
.750 (19.05)
.750 (19.05)
1.000 (25.40)
1.375 (34.93)
1.375 (34.93)
1.750 (44.45)
1.750 (44.45)
2.000 (50.80)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
CE
1.500 (38.10)
1.500 (38.10)
2.063 (52.39)
2.063 (52.39)
2.063 (52.39)
2.813 (71.44)
3.438 (87.31)
3.438 (87.31)
4.000 (101.60)
4.000 (101.60)
5.000 (127.00)
5.000 (127.00)
5.813 (147.64)
6.125 (155.58)
49221
49221A
31/4, 4 & 5
3/4 – 16
14
2.875
(73.03)
.750
(19.05)
1.563
(39.69)
1.750
(44.45)
.593
(15.06)
1.000
(25.40)
1.125
(28.58)
.875
(22.23)
www.norgren.com
ER
.563 (14.29)
.563 (14.29)
.500 (12.70)
.938 (23.81)
.750 (19.05)
1.125 (28.58)
1.563 (39.69)
1.375 (34.93)
2.500 (63.50)
2.500 (63.50)
2.875 (73.00)
2.875 (73.00)
3.250 (82.55)
3.250 (82.55)
49222
49222A
6&8
1 – 14
14
4.125 (104.78)
1.000
(25.40)
2.125
(53.98)
2.750
(69.85)
1.000
(25.40)
1.500
(38.10)
1.625
(41.28)
1.375
(34.93)
Series A & EA, NFPA Aluminum Air Cylinders (ø1-1/2" to 8") Accessories
Series J & EJ, NFPA Steel Air Cylinders (ø1-1/2" to 12") Accessories
øDD
4 Places
NFPA Eye Bracket
NFPA
Eye Bracket
LR Radius
Eye Bracket
Assembly
BA
CB
CD
DD
E
F
FL
LR
M
øCD
E BA
M Radius
CB
F
BA
Note: NFPA Eye Bracket
Assembly is supplied
with Standard Pin.
FL
Norgren Eye Bracket
Norgren
Eye Bracket
øDD
4 Places
Eye Bracket
Assembly
BA
CB
CD
DD
E
F
FL
LR
M
LR Radius
øCD
E BA
M
Radius
CB
F
BA
E
FL
E
Note: Norgren Eye Bracket Assembly is
supplied with Standard Pin.
NFPA Clevis Bracket
49021
49021A
1.625
.750
.500
.406
2.500
.375
1.125
.750
.500
(41.28)
(19.05)
(12.70)
(10.32)
(63.50)
(9.53)
(28.58)
(19.05)
(12.70)
49240
49241
49242
49243
49240A
49241A
49242A
49243A
1.438 (36.51) 1.844 (46.83) 2.188 (55.56) 2.938 (74.61)
.750 (19.05) .750 (19.05) .750 (19.05) 1.250 (31.75)
.500 (12.70) .500 (12.70) .500 (12.70) .750 19.05)
.281 (7.14) .344 (8.73) .344 (8.73) .469 (11.91)
2.000 (50.80) 2.500 (63.50) 3.000 (76.20) 3.750 (95.25)
.375 (9.53) .375 (9.53) .375 (9.53) .500 (12.70)
1.125 (28.58) 1.125 (28.58) 1.125 (28.58) 1.750 (44.45)
.563 (14.29) .563 (14.29) .563 (14.29) 1.000 (25.40)
.625 (15.88) .625 (15.88) .625 (15.88) .875 (22.23)
49020
49020A
2.563
1.250
.750
.531
3.500
.625
1.875
1.250
.750
(65.08)
(31.75)
(19.05)
(13.49)
(88.90)
(15.88)
(47.63)
(31.75)
(19.05)
49244
49244A
3.563 (90.49)
1.250 (31.75)
.750 (19.05)
.469 (11.91)
4.500(114.30)
.500 (12.70)
1.750 (44.45)
1.000 (25.40)
.875 (22.23)
øDD
4 Places
BA
M Radius
CB
CW
FL
Note: NFPA Clevis Bracket Assembly is
supplied with Standard Pin.
BA
CW
E
Norgren
Clevis Bracket
Norgren Clevis Bracket
MR
Radius
LR
Radius
CW
CB
CW
CD
+ .001
M
Pin Dia.
FL
F
R
øDD
4 Places
E
Note: Norgren Clevis Bracket Assembly is supplied with Standard Pin.
NFPA Pin
49017
49019A
49016A
3.813 (96.84)
2.000 (50.80)
1.375 (34.93)
.656 (16.67)
5.000 (127.00)
.875 (22.23)
3.000 (76.20)
2.125 (53.98)
1.375 (34.93)
49019
49019A
3.250
1.500
1.000
.656
4.500
.750
2.250
1.500
1.000
(82.55)
(38.10)
(25.40)
(16.67)
(114.30)
(19.05)
(57.15)
(38.10)
(25.40)
49017A
4.937
2.500
1.750
.906
6.500
.875
3.125
2.250
1.750
49016
(125.40)
(63.50)
(44.45)
(23.02)
(165.10)
(22.23)
(79.38)
(57.15)
(44.45)
49017
49018
49018A
5.750(146.05)
2.500 (63.50)
2.000 (50.80)
1.026 (26.06)
7.500 (190.50)
1.000 (25.40)
3.500 (88.90)
2.500 (63.50)
2.000 (50.80)
49018
49016A
49017A
49018A
3.813 (96.84)
2.000 (50.80)
1.375 (34.93)
.656 (16.67)
5.000 (127.00)
.875 (22.23)
3.000 (76.200
2.125 (53.98)
1.375 (34.93)
4.950 (125.73)
2.500 (63.50)
1.750 (44.45)
.906 (23.01)
6.500 (165.10)
.875 (22.23)
3.125 (79.38)
2.250 (57.15)
1.750 (44.45)
5.730(145.54)
2.500 (63.50)
2.000 (50.80)
1.062 (26.98)
7.500(190.50)
1.000 (25.40)
3.500 (88.90)
2.500 (63.50)
2.000 (50.80)
49250
49251
49252
Clevis Bracket
49250A
49251A
49252A
Assembly
1.625 (41.28) 2.563 (65.09) 3.250 (82.55)
BA
.750 (19.05) 1.250 (31.75) 1.500 (38.10)
CB
.500 (12.70) .750 (19.05) 1.000 (25.40)
CD
.500 (12.70) .625 (15.88) .750 (19.05)
CW
DD
3/8 – 24
1/2 – 20
5/8 – 18
2.500 (63.50) 3.500 (88.90) 4.500 (114.30)
E
.375 (9.53) .625 (15.88) .750 (19.05)
F
1.125 (28.58) 1.875 (47.63) 2.250 (57.15)
FL
.750 (19.05) 1.250 (31.75) 1.500 (38.10)
LR
.500 (12.70) .813 (20.64) 1.000 (25.40)
M
øCD
F
49016
3.250 (82.55)
1.500 (38.10)
1.000 (25.40)
.656 (16.67)
4.500 (114.30)
.750 (19.05)
2.250 (57.15)
1.500 (38.10)
1.000 (25.40)
NFPA Clevis
Bracket
LR Radius
E
49019
49022
49023
49024
49027
49025
49026
Clevis Bracket
49022A
49023A
49024A
49027A
49025A
49026A
Assembly
.750 (19.05) 1.250 (31.75) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 2.500 (63.50)
CB
.500 (12.70) .750 (19.05) 1.000 (25.40) 1.375 (34.93) 1.750 (44.45) 2.000 (50.80)
CD
.500 (12.70) .625 (15.88) .750 (19.05) 1.000 (25.40) 1.250 (31.75) 1.500 (38.10)
CW
.406 (10.32) .531 (13.49) .656 (16.67) .656 (16.67) .906 (23.02) 1.026 (26.06)
DD
3.500 (88.90) 5.000 (127.00) 6.500 (165.10) 8.000 (203.20) 10.000 (254.00) 12.000 (304.80)
E
.500 (12.70) .625 (15.88) .750 (19.05) .875 (22.23) .875 (22.23) 1.000 (25.40)
F
1.500 (38.10) 1.875 (47.63) 2.250 (57.15) 3.000 (76.20) 3.625 (92.08) 4.520 (114.94)
FL
.750 (19.05) 1.188 (30.16) 1.500 (38.10) 2.000 (50.80) 2.750 (69.85) 3.188 (80.96)
LR
.500 (12.70) .750 (19.05) 1.000 (25.40) 1.375 (34.93) 1.750 (44.45) 2.250 (57.15)
M
.625 (15.88) .906 (23.02) 1.250 (28.58) 1.656 (42.07) 2.219 (56.36) 2.781 (70.64)
MR
2.547 (64.69) 3.828 (97.23) 4.953 (125.81) 5.734 (145.65) 7.500 (190.50) 9.938 (252.41)
R
øD
øCD
LP
LH
Note: ø.500, .750, 1.000 are Retainer type
design ø1.375 and larger are Cotter Pin design.
NFPA Pin
CD
LH
LP
D
49006-R
49005-R
49004-R
49003
49002
49001
.500 (12.70) .750 (19.05) 1.000 (12.70) 1.375 (34.93) 1.750 (44.45) 2.000 (50.80)
2.219 (56.30) 3.125 (79.38) 3.750 (95.25) 4.750 (120.65) 5.812 (147.62) 5.812 (147.62)
1.875 (47.63) 2.750 (69.85) 3.250 (82.55) 4.250 (107.95) 5.250 (133.35) 5.281 (134.14)
–
–
–
.173 (4.39) .173 (4.39) .204 (5.18)
49000
2.000 (50.80)
6.312 (160.33)
5.770 (146.56)
.204 (5.18)
49126
49127
2.500 (63.50) 3.000 (76.20)
6.875 (174.60) 6.875 (174.60)
6.312 (160.33) 6.344 (161.14)
(6.35)
.219 (5.56) .250
Standard Pin
HP
Std. Pin
LP
CD
HP
LH
LP
øCD
LH
49207*
49208*
49206
49205
49204
49203
49202
.500 (12.70) .750 (19.05) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.375 (34.93) 1.750 (44.45)
.156 (3.97) .156 (3.97) .156 (3.97) .156 (3.97) .203 (5.16) .250 (6.35) .250 (6.35)
1.421 (36.09) 2.000 (50.80) 2.250 (57.15) 3.000 (76.20) 3.500 (88.90) 5.000 (127.00) 6.000(152.40)
1.266 (32.16) 1.843 (46.83) 2.093 (53.16) 2.843 (72.22) 3.297 (83.74) 4.500 (114.30) 5.500(139.70)
49201
2.000 (50.80)
.250 (6.35)
6.000 (152.40)
5.500 (139.70)
*For small rod clevis only, see page ACT-1-84.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-85
Series A & EA Aluminum Optional Features & Custom Cylinders
Series J & EJ Steel Optional Features & Custom Cylinders
Adjustable Stroke
Provides variable reduction of the retract stroke
and serves as a positive stop for the cylinder
piston. Consists of a threaded stud located in
the cap end of the cylinder. Milled wrench flats
on the end of the adjustment stud allow for
simple yet precise positioning to accommodate
varying retract stroke requirements.
TO ORDER: Enter option code A(_).
Specify adjustable stroke length.
Adjustable Stroke with Piston
A(_)
AA(_)
Provides variable reduction of the retract
stroke and serves as a positive stop for the
cylinder piston. Consists of an adjustable stop
piston attached to a threaded stud located in
K min.
the cap end of the cylinder. Milled wrench flats
Adjustment Length (L)
on the end of the adjustment stud allow for
simple yet precise positioning of the stop
piston to accommodate varying retract stroke requirements.
TO ORDER: Enter option code AA(_). Specify adjustable stroke length.
K min.
Adjustment Length (L)
Maximum Adjustable Stroke Length
Bore
Kmin.
A (L max.)
AA (L max.)
11/2" (38.10)
1
(25.40)
5
(127.00)
10
(254.00)
2"
1
5
10
(50.80)
(25.40)
(127.00)
(254.00)
21/2" (63.50)
1.375 (34.93)
8
(203.20)
16
(406.40)
31/4" (82.55)
1.375 (34.93)
8
(203.20)
16
(406.40)
Metallic Rod Scraper
5"
(127.00)
1.625 (41.28)
9
(228.60)
18
(457.20)
6"
(152.40)
1.625 (41.28)
9
(228.60)
18
(457.20)
7"
2
12
20
(177.80)
(50.80)
(304.80)
(508.00)
Piston Rod
Thread Locker
Applied Here
During Assembly
Rod Stud
Pinned Piston to Rod
1
Cushion Adjust Screw
Optional Locations
1
Option code N(– –)
Specify optional location.
Example: N(4 2) cushion location 4 Head end,
standard position 2 Cap end.
When using option code N, head and cap
locations must be specified 1, 2, 3, or 4.
4
4
Cap
Head
3
When position sensing of the cylinder rod is
required, a “magnetic piston” must be specified.
A magnetic band is placed at the center of the
piston which creates a magnetic field to actuate
Norgren’s reed, solid state or hall effect switch.
NOTE: We cannot guarantee the operation of other
manufacturers’ switches.
TO ORDER: Enter option code PS.
Single Acting Spring Extend
Single Acting Spring Retract
Available on Cap End of Cylinder for 11/2", 2",
and 21/2" bore sizes, 12" maximum stroke.
NOTE: Standard spring extend cylinder
has 12 lbs. force pre-load, 30 lbs. force
compressed. For other spring forces, bore
sizes or longer strokes, consult factory.
TO ORDER: Enter option code SC.
Available on Rod End of Cylinder for 11/2", 2",
and 21/2" bore sizes, 12" maximum stroke.
NOTE: Standard spring retract cylinder
has 12 lbs. force pre-load, 30 lbs. force
compressed. For other spring forces, bore
sizes or longer strokes, consult factory.
TO ORDER: Enter option code SR.
Note: Standard on A & J. Consult factory
for EA & EJ.
Additional Female Thread
Depth
Additional Male Thread Length
A
Piston rod thread extension can
be ordered over standard.
TO ORDER: Enter option code TX(_)
and specify additional “A” length.
Depth
Brookville, OH USA
Phone 937-833-4033
2
2
Magnetic Piston
(No Wear Ring)
Norgren will supply a full size piston rod to
piston joint, in addition to pinning the piston
to the rod, for severe applications. If under
normal operating conditions, the pinned piston
and rod become detached, Norgren will replace
the piston and rod assembly free of charge.
TO ORDER: Enter option code PN.
ACT-1-86
(203.20)
(50.80)
(304.80)
(508.00)
Pre-loaded lip seal has a very low leakage
at low pressure. Excellent for low pressure
hydraulic applications. TO ORDER, enter:
Option code H – Rod seal only.
Option code PP – Rod and piston seals.
Piston Rod Stud
Piston rod thread depth can
be ordered over standard.
TO ORDER: Enter option code TF(–)
and specify additional “A” depth.
8"
2
12
20
Piston Rod Seal
O-Ring Loaded (A & J Only)
Aggressively scrapes the exposed portion of
the piston rod free of weld spatter, paint spray,
abrasive powders or many other foreign
materials that could damage the rod seal.
TO ORDER: Enter option code MS.
Reduces the chance for piston rod failure.
The rod stud can be installed with different
thread locker. TO ORDER, enter:
Option code BL – removable
adhesive sealant.
Option code RS – high strength thread
locker adhesive.
NOTE: Type 2 studded rod shown.
4"
(101.60)
1.375 (34.93)
8
(203.20)
16
(406.40)
A
Length
www.norgren.com
3
Series A & EA Aluminum Optional Features & Custom Cylinders
Series J & EJ Steel Optional Features & Custom Cylinders
ST(–C)
Stop Tube
Enhances the transverse load carrying
capability of a long stroke cylinder by
increasing the distance between the piston and
rod bearing at full extension when placed on
head end. Ideal for those applications requiring
longer strokes or where additional rod stability
is desired.
TO ORDER: Enter option code ST(–C) Cap End
or ST(–R) Rod End. Specify stop tube length.
NOTE: ST(–R) Alternate design: the stop tube
rod end design changes when the stop tube
exceeds J lengths in the chart.
Bore
J
11/2"
1
(38.10)
(25.40)
2"
1
ST(–R)
Cap Stop Tube
Head Stop Tube
consisting of Spacer
Tube and Block
Head Stop Tube
J
Stop Tube Length
21/2"
1
(50.80)
(25.40)
(63.50)
(25.40)
Norgren’s Standard
Thrust Key Plate
Thrust key plates eliminate the use of fitted
bolts or dowel pins on side mountings.
They prevent movement of the cylinder
under shock loading, which might otherwise
occur due to normal clearance between
mounting holes and bolt diameters.
Option code TK available on
01(MS4), 09(MS2) and 15(MS7) mounts.
NOTE: Other manufacturers’ thrust key plates
can vary. Consult factory for information.
ST(–R)
Stop Tube Length
31/4" (82.55)
1.250 (31.75)
4" (101.60)
1.250 (31.75)
Stop Tube Length
5" (127.00)
1.250 (31.75)
E
6" (152.40)
1.500 (38.10)
7" (177.80)
1.500 (38.10)
8" (203.20)
1.500 (38.10)
F
E
PD LN +.000
-.005
FA
Bore
E
F
FA
LN
PD
11/2"
2.000
.375
.313
1.000
1.188
(38.10)
(50.80)
(9.53)
(7.94)
(25.40)
(30.18)
2"
2.500
.375
.313
1.250
1.438
(50.80)
(63.50)
(9.53)
(7.94)
(31.75)
(36.53)
21/2"
3.000
.375
.313
1.500
1.688
(63.50)
(76.20)
(9.53)
(7.94)
(38.10)
(42.88)
31/4"
3.750
.625
.563
1.875
2.188
(82.55)
(95.25)
(15.88)
(14.29)
(47.63)
(57.58)
+.000
-.002
4" (101.60)
4.500 (114.30)
.625 (15.88)
.563 (14.29)
2.250 (57.15)
2.563 (65.10)
5"
(127.00)
5.500 (139.70)
.625 (15.88)
.563 (14.29)
2.750 (69.85)
3.063 (77.80)
6"
6.500
.750
.688
3.250
3.625
(152.40)
(165.10)
(19.05)
(17.46)
(82.55)
(92.08)
NOTE: Care should be taken in machining the keyway slot for a tight fit. Only one keyway should be used per cylinder.
Valve In Head
Integral Shock Absorber
Shock
Mounting
Block
Multi-Position Duplex
Shock
Multi-Position Back-to-Back
Oversize Piston Rod
Air to Air Booster/Pump
Force Multiplication Tandem
Protective Rod Boot
Other Custom Cylinders:
Norgren designs and manufactures
literally hundreds of specialty
cylinders. We welcome the
opportunity to provide you with a
customized cylinder that meets the
specific requirements of your
application. For more information
on how to order custom cylinders
consult factory.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-87
Pneumatic & Pneulectric Valves Shown
Stroke Signal Valve
Stroke Signal Valves emit a positive pneumatic signal to indicate
the position of the piston at each end of the cylinder stroke.
It can be used to energize other air or electrical mechanisms
in a control circuit.
The design involves a three-way normally closed poppet valve that
uses the same pressure that drives the cylinder piston
to provide a pneumatic signal.
Stroke Signal Valves are positioned on either or both ends of the
cylinder according to your specifications. Each cylinder bore has
minimum stroke limitations (See page ACT-1-89.) The standard
Signal Valve begins to give a pneumatic signal when the cylinder
piston is within 1/8" of the end of the stroke. For signal distances
less than 1/8", consult factory.
How the Valve Works
SUPPLY PRESSURE
EXHAUST PRESSURE
Start of the Stroke
OUTLET PORT
1
Pneulectric Valve
2
Pneulectric valves incorporate a single-pole, double-throw electric
conversion switch with a Stroke Signal Valve. (Optional double-pole,
double-throw switches are available.)
The electric conversion switch screws directly into the outlet port
of the Stroke Signal Valve, enabling the Pneulectric Valve to convert
air pulses into electrical signals without the need of complicated
electro-pneumatic circuitry.
At the start of the stroke, the stroke signal valve is closed
because areas (1) and (2) are equally pressurized (A), with
area (1) being several times greater than area (2). Outlet
port is vented to atmosphere.
Mid-Stroke
How to Order Stroke Signal Valves
1
Add suffix SV ( ) after cylinder model number.
Indicate in ( ) Stroke Signal Valve location: list head position first,
cap position last.
Valve position on head and/or cap should be indicated by position
number 1, 2, 3 or 4.
Example: J333A1-SV(02) – Bore x Stroke = Stroke Signal Valve
mounted on cap end only, position 2.
How to Order Pneulectric Valves
The same condition exists at mid-stroke with the
exception that a greater pressure (B) has been applied
to drive the piston.
End of the Stroke†
OUTLET PORT
Add suffix EV after cylinder model number.
Example: J333A1-EV(42S)** – Bore x Stroke = Pneulectric Valve
mounted on head end, position 4 and cap end, position 2, with
single-pole – Double-throw.
** S = Single-pole – Double-throw switch
D = Double-pole – Double-throw switch
1
Brookville, OH USA
2
At the end of the stroke the piston seal has passed the
inboard air hole (3), supplying full pressure against area
(2) When air has exhausted through (A) the valve stem
shifts and pressure is supplied to the outlet port of the
signal valve.
†
ACT-1-88
2
1/8" from bottoming.
Phone 937-833-4033
www.norgren.com
Series A & EA Cylinder, Stroke Signal Valve/Pneulectric Valve
Series J & EJ Cylinder, Stroke Signal Valve/Pneulectric Valve
Dimensions and Mountings: Pneulectric Valve
3.125 (79.38)
1.875
(47.63)
3.500
(88.90)
.375 (9.53)
1.344 (34.13)
18 (457.20)
Leads
1
G
1/2" NPT
Conduit
Connection
Two Valves Mounted on the
Same Side (Type F)
3.188
(80.96)
2
4
.750
(19.05)
3.469
(88.11)
5/8" Hex
(Steel)
3
Adjustable
.688
(17.46)
1/8" – 27 NPT
Stroke signal valves cannot
be mounted on same side
as port location or cushion
adjustment location.
1/8" Air Inlet
2.063
(52.39)
One or Two Valves Mounted on
Different Sides (Type E)
Minimum Stroke
Cylinder Bore
Minimum
Stroke
Type E
Type F
G
11/2"
.813 (20.64)
2.750 (69.85)
4.500 (114.30)
2"
.813 (20.64)
2.750 (69.85)
4.750 (120.65)
21/2"
.688 (17.46)
2.625 (66.68)
5.000 (127.00)
Mounting Specifications
Position 4 Standard on Mounting Styles
1, 3, 4, 5, 6, 9, 11, 12, 15, 16, 20, 21,
22, 32, 42, 52 & 60.
Position 3 Standard on Mounting Styles
7*, 8*& 10.
1
*SV or EV cannot be specified
with cushion (adjustable) on
same end (head or cap).
Stroke signal valves cannot
be mounted on same side as
port location or cushion
adjustment location.
4
2
31/4"
.688 (17.46)
2.625 (66.68)
5.375 (136.53)
4"
.688 (17.48)
2.625 (66.68)
5.750 (146.05)
5"
.438 (11.11)
2.375 (60.33)
6.250 (158.75)
Design Features
Electrical Ratings:
10 amp 110-220 v-ac
10 amp 28 v-dc
Pressure Ratings: Actuation – 30 psig
Modes of Operation:
• Single-pole – Double-throw
• Double-pole – Double-throw
Single-pole – Double-throw is standard.
(For Double-pole – Double-throw specify DP-DT.)
6"
.438
2.375
6.750
(11.11)
(60.33)
(171.45)
7"
.688 (17.46)
3.000 (76.20)
7.250 (184.15)
8"
.688
3.000
7.750
(17.46)
(76.20)
(196.85)
Lead Lengths: 18" standard
Maximum Pressure: 250 psi
Ambient Temperature Rating:
-40°F to 250°F
(-40°C to 121°C)
3 Wire Switch:
Black = Common
Red = N.O. Contact
Green = N.C. Contact
3
Type E
One or Two Stroke
Signal Valves Mounted
on Opposite Sides
Brookville, OH USA
Type F
Two Stroke
Signal Valves Mounted
on the Same Side
Phone 937-833-4033
www.norgren.com
ACT-1-89
Series A & EA Cylinder Switches
Series J & EJ Cylinder Switches
Switches for 1-1/2" to 2-1/2" Cylinders
•
Magnetically operated, non-contact
sensing system.
•
Consists of a magnet in the piston, and a
sensing switch clamped on the cylinder tie rod.
•
One or more switches may be mounted to
provide an indication of piston position or to control
or initiate any sequence function.
•
Adjustable mounting brackets allow for switches
to be securely positioned anywhere along the
range of piston travel.
•
LED indicator light facilitates installation
and troubleshooting.
•
Mounting brackets standard with switches.
Specifications
*Metal Oxide Varsitor Surge Suppression. NOTE: All CS8 Series Switches are supplied with 9 foot leads.
Switch Model
CS8-2-04 Reed
CS8-2-31 Solid State
CS8-2-32 Solid State
Bore Sizes
Switch Type
11/2" thru 21/2"
Solid State & Light,
Sourcing PNP
Normally Open
6-24 VDC
11/2" thru 21/2"
Sinking NPN
Normally Open
6-24 VDC
.5 Amp Max
.5 Amp Max
Switching Power
Max Voltage Drop
Magnetic Sensitivity
11/2" thru 21/2"
Reed Switch
*MOV & Light
SPST Normally Open
5-120 VDC/VAC
50/60 Hz
.5 Amp Max
.005 Amp Min
10 VA
3.5 Volts
85 Gauss
12 Watts Max
.5 Volts
85 Gauss
12 Watts Max
.5 Volts
85 Gauss
Enclosure Classification
Temperature Range
NEMA 6 & CSA Approved
-22°F to +176°F
-22°F to +176°F
-22°F to +176°F
Function
Switching Voltage
Switching Current
Wiring Diagrams
WHT
–
+
Supply
120V Max
+
BRN
0.45
Load
Center of Sensing Area
BRN
Supply
6-24 VDC
–
–
WHT GRN
Supply
6-24 VDC
0.10
Load
+
WHT
BRN
GRN
Load
0.10
Switch & Mounting Bracket Dimensions
CS8-2 Series
1.263"
.53"
.698"
.425"
1.078"
ACT-1-90
Brookville, OH USA
NOTE:
1-1/2" to 2-1/2" bore steel cylinder is
supplied with an aluminum tube as
standard. If a 3-1/4" to 12" bore steel
cylinder requires switches, the aluminum
tube and magnetic piston options must
be selected.
Phone 937-833-4033
www.norgren.com
Switches for 2" to 8" Series A & EA Cylinders
Switches for 2" to 12" Series J & EJ Cylinders
Solid State/Magnetoresistive Working Principle
The solid state (no moving parts) magnetoresistive sensor
responds to a parallel magnetic pole by providing a digital signal
to the output control circuit. This technique enables the sensing
of weak magnetic fields, with no limit to the maximum strength of
the magnetic field. Norgren solid state switches are similar to the
Hall effect switch.
Reed Switch Working Principle
Reed switch sensors contain hermetically sealed reed elements
(mechanical contacts) which are open in their normal state. When
a magnetic field moves within proximity of the switch, magnetism
is induced into the leads and forces the contacts to close.
Normally Open Reed
Normally Open Reed
N
+
+
Output
N
Sensor
S
Sensor
V=0
V<>0
–
Switch Closed
Switch Open
Output
Supply
–
Supply
S
Magnet
Application Recommendations and Precautions
To provide maximum reliability.
1. Always stay within the specifications and power rating limitations of the
unit installed.
2. Primary and control circuit wiring should not be mixed in the same conduit.
Motors will produce high pulses that will be introduced into the control wiring
if the wiring is carried in the same conduit.
3. Never connect the switch without a load present. The switch will be
destroyed.
4. Some electrical loads may be capacitive. Capacitive loading may occur due to
distributed capacity in cable runs over 25 feet. Use switch Model CS7-24
whenever capacitive loading may occur.
In order to obtain optimum performance and long life, magnetically operated
limit switches should not be subjected to: (1) strong magnetic fields,
(2) extreme temperature, and (3) excessive ferrous filing or chip buildup.
Improper wiring may damage or destroy the switch. The wiring diagram, along
with the listed power ratings, must be carefully observed before connecting
power to the switch.
Lower power switches are designed for signaling electronic circuits. Do not use
on relay loads or with incandescent bulbs. Resistive loads only.
CS7-04 Reed
CS7-24 Reed
CS7-31 Solid State
CS7-32 Solid State
2" thru 8"
Reed Switch
*MOV & Light
Normally Open
5-240 VDC/VAC
50/60 Hz
1 Amp Max
2" thru 8"
Reed Switch
*MOV & Light, 3 Wire
Normally Open
24-240 VAC
50/60 Hz
4 Amp Max
50 Amp Inrush
100 Watts Max
N/A
85 Gauss
Parallel
-22°F to +176°F
2" thru 8"
Sourcing PNP
Normally Open
6-24 VDC
2" thru 8"
Sinking NPN
Normally Open
6-24 VDC
1 Amp Max
1 Amp Max
24 Watts Max
.5 Volts
85 Gauss
Parallel
-22°F to +176°F
24 Watts Max
.5 Volts
85 Gauss
Parallel
-22°F to +176°F
30 Watts Max
3 Volts
85 Gauss
Parallel
-22°F to +176°F
+
Load
Supply
AC/DC
RED
AC
Supply
+
WHT
–
WHT
–
RED
–
BLK
Supply
6-24 VDC
Load
BLK
BLK
RED
BLK
+
Load
RED
Supply
AC/DC
WHT
Load
NOTE: For 8" bore add 9 to part number. Example: CS7-9-04. For 10" and 12" bore, consult the factory.
CS7 Series
1.28"
Indicator Light
.86"
Hook Up
Cable
1.66"
.68"
1.27"
.68"
.327"
.85"
1.40"
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-91
Flow Controls
Right Angle (Banjo) Flow Controls
● 360° rotation of the banjo body around the bolt allows for ideal
positioning of tubing.
● Low profile and reduced physical size provide space saving
installations, while internal configuration provides the flow
capacity of much bulkier designs.
● Tapered adjustment needles with large adjustment ranges
provide linear flows and greater precision.
● Knurled adjustment knobs (w/screw driver slot) and lock nuts on
12 VA0 and 10 TA0 series provide finger tip adjustment. Tamper
resistance on the 10 K51 is provided by a slotted adjustment
screw covered by a protective plastic cap.
● Direct mounting of flow controls on pneumatic actuators
minimizes the adjustment problems encountered due to
the compressibility of air in long tubing runs between the
actuator and control valving. Additionally, direct mounted flow
controls end the confusion over which actuator in a circuit is
being controlled.
● Metallic components are limited to nickel plated all brass
construction, eliminating the potential problems encountered
with products constructed of dissimilar metals.
● Adjustment needles and banjo bodies are retained, preventing
accidental loss of the needle or lock nut.
Operation
Flow Controls are checked adjustable controls of the meter out type.
Compressed air passes freely into the push-in fitting portion of the flow
control, flowing past the check seal and entering the connected
component. In reverse flow conditions, air passes back into the flow
control and energizes the check seal. Air must now flow through the
metered passage controlled by the tapered adjustment needle of the flow
control, and finally exits through the push-in fitting end.
Specifications
Fluid: Compressed air. For other types of compressed gases, please
consult factory.
Working Pressure: 0 to 150 psig (0 to 10 bar)
Temperature Range: 0° to 175°F (-20° to 80°C)
Tapered
Adjustment Needle
Free Flow In
(Metered Flow Out)
Materials of Construction
Banjo bolt, collet, adjustment knob and lock nut: Nickel plated brass
Tapered adjusting needle: Brass
Banjo Body 10 TA0 and 12 VA0 XXXX: Thermoplastic
10 K51 XXXX: Nickel plated brass
O-rings and check-seal: Silicone free Nitrile
Sealing washer: Thermoplastic (ISO G and 10-32 UNF)
Tubing: Nylon 11 or 12, 95 durometer polyurethane.
Thread Sealant: Thread sealant is applied to the full circumference of
tapered male threads.
Check Seal
Free Flow Out
(Metered Flow In)
neumaticSymbol
Pneumatic Symbol
Options
Special versions of the flow controls are available, including meter-out
and bi-directional control configurations. Please consult factory with
specific quantities and requirements.
ACT-1-92
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Flow Controls
G
Square
ØF
ØE
L Adjustment
D
VAO Banjo Flow Control
Flow Characteristics
(10-32, 1/8, 1/4, and 3/8 NPTF)
(8)
Flow of Air (scfm)
17.0
(7)
14.8
(6)
12.7
(5)
10.
(I/s)
VAO Banjo Flow Control
Flow Characteristics
(1/2 NPTF)
(I/s)
(40)
Flow of Air (SCFM)
84.8
(30)
63.6
(20)
42
(10)
21
3/8 NPTF
H (Closed)
ØC ØA
J
(4)
8.
(3)
6.4
(2)
4.2
(1)
2
(0)
0
1/2 NPTF
1/4 NPTF
1/8 NPTF
10-32 UNF
0
0
.5
1
1.5
2
2.5
3
4
5
3.5
4.5
Number of Turns
6
5.5
7
6.5
7.5
0
8
1
2
3
4
5
6
7
8
9
10
11
Number of Turns
Inlet pressure 90 psig (6 bar), flow to atmoshpere
Inlet pressure 90 psig (6 bar), flow to atmosphere
B
‘K’ A/F Hex
A
Tube
O.D.
5/32"
1/4"
3/8"
1/2"
B
NPTF or
UNF
Thread Part Number
10-32 UNF
1/8
1/8
1/4
1/4
3/8
1/2
12 VA0 0210
12 VA0 0218
12 VA0 0418
12 VA0 0428
12 VA0 0628
12 VA0 0638
12 VA0 0748
C
0.31
0.30
0.43
0.43
0.57
0.57
0.71
D
(7.87)
(7.62)
10.93)
(10.93)
(14.48)
(14.48)
(18.03)
0.37
0.45
0.51
0.53
0.77
0.77
0.91
E
(9.40)
(11.43)
(12.95)
(13.46)
(19.56)
(19.56)
(23.11)
K51 Series
1.04
0.87
0.91
1.00
0.24
1.28
1.50
F
(26.41)
(22.10)
(23.11)
(25.4)
(6.10)
(32.51)
(38.10)
0.16
0.31
0.31
0.39
0.39
0.47
0.63
G
(4.06)
(7.87)
(7.87)
(9.90)
(9.90)
(11.94)
(16.00)
0.74
0.35
0.35
0.43
0.43
0.51
0.71
J
(18.80)
(8.89)
(8.89)
(10.93)
(10.93)
(12.95)
(18.03)
0.10
0.63
0.63
0.79
0.79
0.87
1.06
K
A/F
H
(2.54)
(16.00)
(16.00)
(20.07)
(20.07)
(22.09)
(26.92)
2.09
2.09
2.64
2.64
3.07
3.66
–
(53.09)
(53.09)
(67.06)
(67.06)
(77.97)
(92.97)
K51 BANJO FLOW CONTROL
FLOW CHARACTERISTICS
(84.8)
40
(63.6)
30
(42.0)
20
(21.0)
10
(23.0) 11
G 1/4
(21.0) 10
(19.0)
9
(17.0)
8
(14.8)
7
(12.7)
6
G 1/2
G 3/8
E
G
B
–
9/16"
9/16"
11/16"
11/16"
3/4"
7/8"
Flow of Air I/s
(scfm)
(scfm)
L
ØD ØA
–
(22.61)
(22.61)
(29.46)
(29.46)
(33.02)
(41.91)
K51 BANJO FLOW CONTROL
FLOW CHARACTERISTICS
Flow of Air I/s
C
A/F
0.89
0.89
1.16
1.16
1.30
1.65
L
ADJ
(10.6)
5
(8.5)
4
(6.4)
3
0
ØS
(4.2)
2
(2.1)
1
(0)
0
G 1/8
0
1
2
3
4
5
6
7
8
9
10
11
Number of Turns
Inlet pressure 6 BAR (90 PSIG), flow to atmosphere
0
1
.5
1.5
2
2.5
3
4
5
3.5
4.5
Number of Turns
5.5
6
6.5
7
7.5
8
Inlet pressure 6 BAR (90 psig), flow to atmosphere
B
A
ISO G or
Tube Metric
O.D.
Thread Part Number
4"
5"
6"
8"
10"
12"
M5 X .8
1/8
M5 X .8
1/8
M5 X .8
1/8
1/4
1/4
3/8
3/8
1/2
10 K51 0405
10 K51 0418
10 K51 0505
10 K51 0518
10 K51 0605
10 K51 0618
10 K51 0628
10 K51 0828
10 K51 0838
10 K51 1038
10 K51 1248
C
A/F
0.31
0.55
0.31
0.55
0.31
0.55
0.67
0.67
0.87
0.87
1.06
D
(7.87)
(13.97)
(7.87)
(13.97)
(7.87)
(13.97)
(17.01)
(17.01)
(22.10)
(22.10)
(26.92)
0.37
0.43
0.43
0.45
0.49
0.49
0.51
0.55
0.65
0.67
0.69
(9.40)
(10.92)
(10.92)
(11.43)
(12.45)
(12.45)
(12.95)
(13.97)
(16.51)
(17.01)
(17.53)
E
1.04
1.34
1.04
1.34
1.04
1.34
1.44
1.44
2.03
2.03
2.26
(26.41)
(34.03)
(26.41)
(34.04)
(26.41)
(34.04)
(36.57)
(36.57)
(51.56)
(51.56)
(57.40)
Brookville, OH USA
G
0.16
0.26
0.16
0.26
0.16
0.26
0.28
0.28
0.43
0.43
0.39
(4.06)
(6.60)
(4.06)
(6.60)
(4.06)
(6.60)
(7.11)
(7.11)
(10.92)
(10.92)
(9.91)
L
0.74
0.81
0.80
0.85
0.87
0.93
0.95
0.97
1.05
1.23
1.50
(18.80)
(20.57)
(20.32)
(21.59)
(22.10)
(23.62)
(24.13)
(24.64)
(26.67)
(31.24)
(38.10)
S
0.10
0.20
0.10
0.20
0.10
0.20
0.33
0.33
0.39
0.39
Phone 937-833-4033
(2.54)
(5.08)
(2.54)
(5.08)
(2.54)
(5.08)
(8.38)
(8.38)
(9.90)
(9.90)
-
www.norgren.com
ACT-1-93
Series A, NFPA Aluminum Air Cylinders (ø1-1/2" to 8"), Cylinder Features
øF Shank
Rod Alignment Coupler
G Across Flats
A Thds.
The Rod Alignment Coupler allows 1/16" of radial
float and 2° of spherical movement. This prevents
cylinder binding due to misalignment thus
extending bearing and seal life, and permits
greater tolerance between the centerline of the
cylinder and mating part for simplified installation.
A Thds.
.062
Radial Float
2˚ Spherical
Motion
E
H Across
Flats
øB
E
D
C
Rod Alignment Coupler Dimensions
A
B
C
D
E
F
G
H
Max Pull (lbs.)
CC-1-07
7/16 – 20
1.250 (31.75)
2.000 (50.80)
.500 (12.70)
.750 (19.05)
.625 (28.58)
.500 (12.70)
1.125 (28.58)
10,000
CC-1-08
1/2 – 20
1.250 (31.75)
2.000 (50.80)
.500 (12.70)
.750 (19.05)
.625 (28.58)
.500 (12.70)
1.125 (28.58)
14,000
CC-1-10
5/8 – 18
1.250 (31.75)
2.000 (50.80)
.500 (12.70)
.750 (19.05)
.625 (28.58)
.500 (12.70)
1.125 (28.58)
19,000
CC-1-12
3/4 – 16
1.750 (44.45)
2.312 (58.72)
.500 (12.70)
1.125 (28.58)
.969 (24.61)
.812 (20.62)
1.500 (38.10)
34,000
CC-1-14
7/8 – 14
1.750 (44.45)
2.312 (58.72)
.500 (12.70)
1.125 (28.58)
.969 (24.61)
.812 (20.62)
1.500 (38.10)
39,000
CC-1-16
1 – 14
2.500 (63.50)
2.937 (74.60)
.500 (12.70)
1.625 (41.28)
1.375 (34.93)
1.156 (29.36)
2.250 (57.15)
64,000
CC-1-20
11/4 – 12
2.500 (63.50)
2.937 (74.60)
.500 (12.70)
1.625 (41.28)
1.375 (34.93)
1.156 (29.36)
2.250 (57.15)
78,000
CC-1-24
11/2 – 12
3.250 (82.50)
4.375 (111.13)
.812 (20.62)
2.250 (57.15)
1.750 (44.45)
1.500 (38.10)
3.000 (76.20)
134,000
CC-1-28
13/4 – 12
3.250 (82.50)
4.375 (111.13)
.812 (20.62)
2.250 (57.15)
1.750 (44.45)
1.500 (38.10)
3.000 (76.20)
134,000
1 1/8" Bore only
Air-Oil Tank
Available in 5 practical bore sizes: 11/8", 2", 31/4",
5", and 8", the Air-Oil Tank includes a translucent
fiberglass tube which permits viewing of the tank
oil level from any position, internal baffles that
reduce foaming and aeration of the system oil
resulting in maximum cylinder control, and
standard angle mounting brackets (except 11/8"
bore) easily removed for convenient fluid
port positioning.
G
H
L NPT
Fill Port
øJ (4)
A
L NPT
Fill
Port
K NPT
Port
E
K NPT
Port
*C *B
*B *C *D
D
A
F
*plus internal length
E
How to Figure Length of Volume
The following equations are given to help you in selecting the right air/oil tank volume for your particular application.
Volume of Cylinder: • Cap End Cylinder Bore Area x Stroke = Volume
• Head End Cylinder Bore Area – (Piston Rod Area*) x Stroke = Volume *Reference Page ACT-1-13 for Areas.
Length of Tank = Volume of Cylinder x 1.3** (See chart below.) **30% minimum recommended reserve working volume.
Tank Bore Area
Final Length of Volume of Tank = Working length of tank + 2" minimum safety factor to prevent aeration of oil.
Note: Length must be at least 3".
Air-Oil Tank Volumes (cubic inches)
Bore
1-1/8"
2"
3-1/4"
AOT-225
AOT-04
AOT-065
1.500 (38.10) 2.687 (68.25) 4.000 (101.60)
A
1.250 (31.75) 2.000 (50.80) 2.500 (63.50)
B
.750 (19.05) 4.000 (101.60) 5.000 (127.00)
C
.750 (19.05) 4.750 (120.65) 6.000 (152.40)
D
(9.53) .500 (12.70)
.375
E
–
(3.18) .187
(4.75)
.125
F
–
2.500 (63.50) 3.750 (95.25)
G
–
1.750 (44.45) 2.750 (69.85)
H
–
.437 (11.10) .562 (14.27)
øJ
–
(3.18) .375
(9.53) .500 (12.70)
.125
K
(3.18) .250
(6.35) .375
(9.53)
.125
L
Note: Maximum operating pressure 250 PSI.
ACT-1-94
5"
AOT-10
5.625 (142.88)
2.500 (63.50)
5.000 (127.00)
6.000 (152.40)
.500 (12.70)
(4.75)
.187
5.500 (139.70)
4.250 (107.95)
.562 (14.27)
.500 (12.70)
(9.53)
.375
8"
AOT-16
8.625 (219.08)
3.000 (76.20)
6.625 (168.28)
8.000 (203.20)
.687 (17.45)
(6.35)
.250
8.500 (215.90)
7.125 (180.98)
.812 (20.62)
.750 (19.05)
.500 (12.70)
Brookville, OH USA
Internal Length of Tank
Air-Oil Tank Dimensions
Bore
Area
6"
8"
10"
12"
14"
16"
18"
20"
1-1/8"
.995 sq."
5.9
7.9
9.9
11.9
13.9
15.9
17.9
19.9
2"
3.14 sq."
18.6
25.1
31.4
37.6
43.9
50.2
56.5
62.8
3-1/4"
8.30 sq."
49.8
66.4
83.0
99.6
116.2
132.8
149.4
166.0
5"
19.64 sq."
117.8
157.1
196.4
235.6
274.9
314.2
353.5
392.8
How to Order: Specify air-oil tank part number and internal length.
Example: 2" bore with 6" internal length = AOT-04 x 6
Phone 937-833-4033
www.norgren.com
8"
50.26 sq."
301.5
402.0
502.6
603.1
703.6
804.1
904.5
1005.2
Series A & EA, NFPA Aluminum Air Cylinders (ø1-1/2" to 8"), Standard & Special Options
Series J & EJ, NFPA Steel Air Cylinders (ø1-1/2" to 12"), Standard & Special Options
Option
Code
A(–)
AA(–)
AN
AP
BL
EN
EV(– –)
FG
H
HR
L(– –)
LF
MS
N(– –)
NW
P(–)
PP
PN
PS
RS
RX(–)
S
SB
SC†
SL
SR†
SS
ST(–C)
ST(–R)
SV(– –)
T(–)
TF(–)
TX(–)
V
XI(–)
Description
Stroke Adjustment Single Piston (specify adjustment length) – see page ACT-1-86
Stroke Adjustment Double Piston (specify adjustment length) – see page ACT-1-86
Acorn Tie Rod Nuts (Stainless Steel)
Air/Oil Piston (Piston supplied with O-ring hooded U-cup on cap end for air/oil operation)
Removable Piston Rod Stud (installed with removable adhesive sealant)
Electroless Nickel Plated Cylinder
Pneulectric Stroke Signal Valve(s): EV(Head Cap) (specify position) – see pages ACT-1-88 & 89
Black Fiberglass Cylinder Tube
Piston Rod Seals O-ring loaded U-cups – see page ACT-1-86 (A & J Only)
Case Hardened Piston Rod
Non-Standard Port Location position 1 standard: L(Head Cap) (specify position 1 thru 4 for head and/or cap)
Low Friction Cylinder (Nitrile compounded with Teflon® rod and piston seals) (Not available with Ecology series)
Metal Scraper – see page ACT-1-86
Cushion Adjust Screw Location position 2 standard:N(Head Cap) (specify position 1 thru 4 for head and/or cap)
No Wearstrip in Cylinder
Non-Standard Port Sizes – [specify port size for P(–H) head only, P(–C) cap only, or P(–) both head & cap]
Seals in Cylinder O-ring loaded U-cups (rod and piston seals) – see page ACT-1-86 (A & J Only)
Pinned Piston and Rod Assembly – see page ACT-1-86
Magnetic Piston Modification (no wearstrip) – see page ACT-1-86
Studded Male Piston Rod End
Piston Rod Extension Over Standard (specify additional “C” length)
303/304 Stainless Steel Tie Rods & Nuts
Stainless Steel Rod Bushing Nut
Single Acting Spring Extend Cap End of Cylinder – see page ACT-1-86
Steel Cylinder Tubing
Single Acting Spring Retract Rod End of Cylinder – see page ACT-1-86
303 Stainless Steel Piston Rod
Stop Tube on Cap End (C) of Cylinder: ST(stop tube length C) – see page ACT-1-87
Stop Tube on Rod End (R) of Cylinder: ST(stop tube length R) – see page ACT-1-87
Stroke Signal Valve(s): SV(Head Cap) – see pages ACT-1-88 & 89
Non-Standard Piston Rod Thread (specify thread)
Piston Rod Thread Depth Over Standard (Female) (specify additional “A” length) – see page ACT-1-86
Piston Rod Thread Extension Over Standard (Male) (specify additional “A” length) – see page ACT-1-86
Viton® Seals in Cylinder
Type #10 Trunnion Set Dimension (MT4 Model Only) (customer must specify length)
Standard available for 11/2", 2", 21/2" bores, 12" max stroke. (Stroke length doubles – 24" max); 12 lbs. force preload, 30 lbs. force compressed.
Cushions not available on spring end. For other spring forces, bore sizes or longer strokes, consult factory.
†
Consult Factory for These Options:
Option
Code
AS
BB
BP
BT
CT
EX
LA
NI
NS
NT
OE
OV
PB
RB
SA
SM
TE
TK
VM
XE
Description
Airsaver Stroke Adjustment
Cylinders Mounted Back to Back
British Standard Pipe Cylinder Ports (Parallel) (BSPP)
British Standard Pipe Cylinder Ports (Tapered) (BSPT)
Close Tolerance on Cylinder Stroke
Ecology Piston Seal on Rod End of Cylinder
Low Friction Cylinder (Pak-LapTM style seals)
Nituff® Coated Cylinder
No Silicone Used in Cylinder Assembly
Nicotef® Coated Cylinder
Zero Stroke/Pneulectric Stroke Signal Valve(s)
Zero Stroke/Stroke Signal Valve(s)
Piston Seal O-ring loaded deep U-cup shape
Rod Boot over Piston Rod
SAE Cylinder Ports (Straight Thread)
Stroke Signal Valve (Mounting Only)
Nituff® Coated Cylinder Tubing
Thrust Key Plate Mounting – see page ACT-1-87 [01 (MS4), 09 (MS2), and 15 (MS7)
Valve Mounting Only
Ecology Piston Seal on Cap End of Cylinder
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-95
Series A, DA, EA & EDA, NFPA Aluminum Air Cylinders (ø1-1/2" to 8") Special Order Information
Series J, DJ, EJ & EDJ, NFPA Steel Air Cylinders (ø1-1/2" to 12") Special Order Information
EJ
A
DA
EA
EDA
J
DJ
EJ
EDJ
01
–
7 7
–
A 1
–
HR–L(1 4)–MS–P(1/4)–V
Series A Cylinder
Series A Double Rod End Cylinder
Series EA Cylinder
Series EA Double Rod End Cylinder
Series J Cylinder
Series J Double Rod End Cylinder
Series EJ Cylinder
Series EJ Double Rod End Cylinder
2" X 6"
HR
MS
Metal Rod Scraper
P(_)* Non-Standard Port Sizes: [specify port size for P(_H)
head only, P(_C) cap only, or P(_) both head & cap]
PS
Magnetic Piston – includes aluminum tube option - J & EJ
RS
Rod Stud
Type 1 (5/8" – 13/4" øRod)
Type 2 (5/8" & 1" øRod)
RX
SC
SR
SS
T
TX
V
Viton® Seals
Mounting Options
04 Cap Square (ME4) – 7" & 8" Bores
8R Removable Cap Trunnion (MT2) - A & EA
09 Side Lugs (MS2)
60 Base Bar (Not NFPA A & EA Only)
1
Small Male (Solid)
2
3
Female
6
7
Plain Rod End
A** 5/8"
Standard on 11/2", 2", 21/2"
B**
1"
Oversized on 11/2", 2", 21/2"
C** 13/8"
Standard
on 10"
D** 13/4"
Standard on 12"
E
2"
Oversized on 10"
F
Cushion in Head
3 None
9 Decel Cushion
†
Cushion in Cap
3 None
9 Decel Cushion
†
EXAMPLE: Series EJ Cylinder – MS4 side tapped mount – Adjustable
cushion in head (Position 2) – Adjustable cushion in cap (Position 2) – 5/8"
piston rod diameter – Small male (solid) piston rod thread – Case hardened
rod – Head port location at 1 – Cap port location at 4 – Metal rod scraper
option – 1/4" special port size – Viton seals option – 2" X 6" bore and stroke.
IMPORTANT: Write out bore and stroke completely as shown in example.
Reed & Solid State Switches
Available on all bore sizes – order separately.
See pages ACT-1-90 & ACT-1-91 for specifications.
Port and Cushion
Adjustment Positions
(As viewed from rod end:
Port standard position 1,
Cushion Adjustment standard
position 2.)
Adjustment cannot be in the
same position.
Brookville, OH USA
1
4
2
3
NOTE: Consult factory when using competitive position sensing devices.
ACT-1-96
–
Phone 937-833-4033
www.norgren.com
Series A, EA, J & EJ, NFPA Air Cylinder Seal Replacement Kits
Piston Seal Kits (Includes: 2 piston seals, 1 wear ring and 2 tube end seals.)
Bore
Inches (mm)
1-1/2" (38.10)
2"
(50.80)
2-1/2" (63.50)
3-1/4" (82.55)
4"
(101.80)
5"
(127.00)
6"
(152.40)
7"
(177.80)
8"
(203.20)
10"
(254.00)
12"
(304.80)
Series A & J
Buna N
Viton
AJK-153
VAJK-153
AJK-203
VAJK-203
AJK-253
VAJK-253
AJK-323
VAJK-323
AJK-403
VAJK-403
AJK-503
VAJK-503
AJK-603
VAJK-603
AJK-703
VAJK-703
AJK-803
VAJK-803
AJK-1003
VAJK-1003
AJK-1203
VAJK-1203
Series EA & EJ
Buna N
Viton
EJK-153
VEJK-153
EJK-203
VEJK-203
EJK-253
VEJK-253
EJK-323
VEJK-323
EJK-403
VEJK-403
EJK-503
VEJK-503
EJK-603
VEJK-603
EJK-703
Consult Factory
EJK-803
Consult Factory
EJK-1003
Consult Factory
EJK-1203
Consult Factory
Piston Seal Kit
(2) Tube End Seals
(2) Piston Seals
Wear Ring
Rod Bearing Kits for Series A, EA, J & EJ
Rod Bearing Kit*
(Includes: Bearing Assembly, Rod Seal, Wiper & O-Ring.)
Rod
Diameter
Buna N
Viton
5/8"
(15.88)
RBK-15
VRBK-15
1"
(25.40)
RBK-25
VRBK-25
1-3/8"
(34.93)
RBK-35
VRBK-35
1-3/4"
(44.45)
RBK-45
VRBK-45
Rod Seal*
O-Ring*
Bearing Assembly*
2"
(50.80)
RBK-55
VRBK-55
2-1/2"
(63.50)
RBK-65
VRBK-65
Wiper*
Piston Rod Seal Kits for Series A, EA, J & EJ
(Includes: Rod Seal, Wiper & O-Ring.)
Rod
Diameter
Buna N
Viton
5/8"
(15.88)
SWK-15
VSWK-15
1"
(25.40)
SWK-25
VSWK-25
1-3/8"
(34.93)
SWK-35
VSWK-35
1-3/4"
(44.45)
SWK-45
VSWK-45
2"
(50.80)
SWK-55
VSWK-55
2-1/2"
(63.50)
SWK-65
VSWK-65
Wiper**
Piston Rod Seal Kit**
Rod Seal** O-Ring**
Cushion Seal Kits for Series A, EA, J & EJ (Single Rod End includes: 1 head and 1 cap cushion seal.)
Rod
Bore
1-1/2"
2"
2-1/2"
3-1/4 – 5"
6" – 8"
10" – 12"
(38.10)
(50.80)
(63.50)
(82.55 – 127.00)
(152.40 – 203.20)
(254.00 – 304.80)
CSK-15-13
VCSK-15-13
CSK-25-13
VCSK-25-13
CSK-35-53
VCSK-35-53
CSK-15-13
VCSK-15-13
CSK-25-13
VCSK-25-13
CSK-35-13
VCSK-35-13
CSK-45-13
VCSK-45-13
CSK-25-23
VCSK-25-23
CSK-35-23
VCSK-35-23
CSK-45-23
VCSK-45-23
CSK-55-23
VCSK-55-23
CSK-65-23
VCSK-65-23
CSK-35-33
VCSK-25-33
CSK-45-33
VCSK-45-33
CSK-55-33
VCSK-55-33
CSK-65-33
VCSK-65-33
Buna N CSK-15-13
5/8"
Viton
VCSK-15-13
Buna N CSK-25-43
1"
Viton
VCSK-25-43
Buna N
1-3/8"
Viton
Buna N
1-3/4"
Viton
Buna N
2"
Viton
Buna N
2-1/2"
Viton
CSK-65-23
VCSK-65-23
CSK-55-33
VCSK-55-33
CSK-65-53
VCSK-65-53
Single Rod End Cushion Seal Kit
Cap
Cushion Seal
Head
Cushion Seal
Cushion Seal Kits for Series A, EA, J & EJ (Double Rod End includes: 2 head cushion seals.)
Rod
Bore
1-1/2"
2"
2-1/2"
3-1/4 – 5"
6" – 8"
10" – 12"
(38.10)
(50.80)
(63.50)
(82.55 – 127.00)
(152.40 – 203.20)
(254.00 – 304.80)
CSK-15-23
VCSK-15-23
CSK-25-53
VCSK-25-53
CSK-35-63
VCSK-35-63
CSK-15-23
VCSK-15-23
CSK-25-53
VCSK-25-53
CSK-35-43
VCSK-35-43
CSK-45-43
VCSK-45-43
CSK-25-53
VCSK-25-53
CSK-35-43
VCSK-35-43
CSK-45-43
VCSK-45-43
CSK-55-43
VCSK-55-43
CSK-65-43
VCSK-65-43
CSK-35-43
VCSK-35-43
CSK-45-43
VCSK-45-43
CSK-55-43
VCSK-55-43
CSK-65-43
VCSK-65-43
Buna N CSK-15-23
Viton
VCSK-15-23
Buna N CSK-25-63
1"
Viton
VCSK-25-63
Buna N
1-3/8"
Viton
Buna N
1-3/4"
Viton
Buna N
2"
Viton
Buna N
2-1/2"
Viton
5/8"
CSK-45-43
VCSK-45-43
CSK-55-43
VCSK-55-43
CSK-65-43
VCSK-65-43
Double Rod End Cushion Seal Kit
Head
Cushion Seal
Head
Cushion Seal
NOTE: When ordering repair kits for Series A, EA, J and EJ cylinders, please specify the type of kit, the cylinder model number, and the
cylinder bore. This will ensure that you receive the proper repair kit(s).
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-1-97
Section 2
Series SS
Stainless Steel Cylinders
Series SS 1-1/2" thru 8" Cylinder Features ...........................................ACT-2-2
Ultra Cushion & Soft Touch Bumper Seal ............................................ACT-2-3
Technical Information............................................................................ACT-2-4
Cylinder with 01 (MX0) Basic................................................................ACT-2-6
Cylinder with 02 (MS4) Bottom Tap .....................................................ACT-2-8
Cylinder with 04 (MF1) Front Flange .................................................ACT-2-10
Cylinder with 05 (MF2) Rear Flange ..................................................ACT-2-12
Cylinder with 06 (MP1) Cap Fixed Clevis ...........................................ACT-2-14
8" Cylinder with 10 (ME3) Head Square & 11 (ME4) Cap Square ....ACT-2-16
Cylinder with 15 (MT1) Head Trunnion ..............................................ACT-2-18
Cylinder with 16 (MT2) Cap Trunnion.................................................ACT-2-20
Double Rod End Cylinder with 01 (MX0) Basic .................................ACT-2-22
1-1/2" thru 8" Cylinder Accessories ....................................................ACT-2-24
Optional Features & Custom Cylinders...............................................ACT-2-25
1-1/2" thru 8" Order Information..........................................................ACT-2-26
Series SS 1-1/8" Cylinder Features ......................................................ACT-2-27
1-1/8" Cylinder with 01 (MX0) Basic, 03 (MS8) Bolt Thru,
04 (MF7) Front Flange, 05 (MF2) Rear Flange ............................ACT-2-28
1-1/8" Cylinder with 17 (MP3) Fixed Eye, 22 (MS9) Side Tap,
30 (MR1) Head Face ....................................................................ACT-2-30
1-1/8" Double Rod End Cylinder with 01 (MX0) Basic .......................ACT-2-30
1-1/8" Cylinder Accessories & Optional Features...............................ACT-2-32
1-1/8" Order Information .....................................................................ACT-2-33
Switch Information .................................................................................ACT-2-34
ACT-2-6 –
ACT-2-8 –
ACT-2-10 –
ACT-2-12 –
ACT-2-14 –
ACT-2-16 –
Cylinder with
01 (MX0)
Basic
Cylinder with
02 (MS4)
Bottom Tap
Cylinder with
04 (MF1)
Front Flange
Cylinder with
05 (MF2)
Rear Flange
Cylinder with
06 (MP1)
Cap Fixed Clevis
8" Cylinder with
10 (ME3)
Head Square
ACT-2-16 –
ACT-2-18 –
ACT-2-20 –
ACT-2-22 –
ACT-2-28 –
ACT-2-28 –
8" Cylinder with
11 (ME4)
Cap Square
Cylinder with
15 (MT1)
Head Trunnion
Cylinder with
16 (MT2)
Cap Trunnion
Double Rod End
Cylinder with
01 (MX0) Basic
1-1/8" Cylinder
with 01 (MX0)
Basic
1-1/8" Cylinder
with 03 (MS8)
Bolt Thru
ACT-2-28 –
ACT-2-28 –
ACT-2-30 –
ACT-2-30 –
ACT-2-30 –
ACT-2-30 –
1-1/8" Cylinder
with 04 (MF7)
Front Flange
1-1/8" Cylinder
with 05 (MF2)
Rear Flange
1-1/8" Cylinder
with 17 (MP3)
Fixed Eye
1-1/8" Cylinder
with 22 (MS9)
Side Tap
1-1/8" Cylinder
with 30 (MR1)
Head Face
1-1/8" Double Rod
End Cylinder with
01 (MX0) Basic
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-1
Series SS Actuators
The finest materials for each component!
1 Piston Seals: Lip-type nitrile seals
2 Piston: Solid aluminum alloy,
are pressure energized and wear
compensating. Their excellent lubrication
retention characteristics lower seal friction
and ensure long life.
6 Piston Rod: 303 stainless steel,
3 Head/Cap: Precision machined
40,000 PSI minimum yield, hard chrome
plated, ground and polished.
from solid corrosion-resistant 304
stainless steel bar.
8
3
5 Rod Seals: Rounded lip-type urethane is
pressure energized and wear compensating.
light-weight for low inertia, yet strong.
4 Rod Wiper: Lip-type urethane
aggressively wipes foreign material from
piston rod and enhances rod seal life.
1
1
2
3
5
4
6
7
9
10
11
7
13
12
8
7 Ultra Cushion®: State-of-the-art
design features a unique, one-piece, nitrile
compound seal, captured within a precision
machined groove. Linear and radial “float”
of cushion seal eliminates misalignment.
Ultra Cushions provide exceptionally fast
“out of cushion” stroke reversal. (Head and
Needle
Allows for safe and precise adjustment
under pressure.
9 Wear Strip: Teflon® and graphite
composition for minimum friction,
maximum wear and side load resistance.
(Magnetic band under wear strip optional.)
14
12 Retainer: Stainless steel snap ring
securely retains bushing in head.
13 Rod Bearings: Machined from 304
10 Tube: Corrosion-resistant 304
stainless steel.
stainless steel, with a Teflon® composite
wear band insert that eliminates metal-tometal contact.
11 Tie Rods: High-strength 303
stainless steel maintains compression
on tube end seals.
14 Acorn Nut: Tie rod threads are
covered by stainless steel acorn nuts which
eliminate another bacteria hiding place.
Series D
Series D cylinders are designed for extremely smooth stroke performance on applications requiring very slow extension
and/or retraction speeds. They are identical to the Series SS in design, function and dimensions, but have “ELF” carboxylated
nitrile piston seals, rod seals, and rod wipers.
“ELF” carboxylated nitrile is a blend of Teflon® and other low friction additives that are molded into the substrate of the base seal material.
Incorporating this compound in the dynamic seals of the cylinder results in diminished friction, lower breakaway and superior stroke performance.
Features:
• Extra smooth performance throughout the entire stroke of the cylinder.
• Available in standard SS series bore sizes.
ACT-2-2
Brookville, OH USA
Phone 937-833-4033
• NFPA interchangeable.
• Cylinders rated to 250 PSI air.
www.norgren.com
Series SS Actuators
Ultra Cushion®
Norgren’s state-of-the-art cushion design features a unique,
one-piece, nitrile compound seal that is captured within a
precision machined groove. This allows both linear and
radial “float” of the cushion seal which virtually eliminates
problems associated with misalignment. Integral flow paths
molded in the periphery of the seal provide exceptionally
fast “out of cushion” stroke reversal without the use of
ball checks.
Figure 1
Soft Touch Bumper Seal
The solution for noise pollution!
Norgren’s Low Friction Soft Touch Bumper Seal, in conjunction with our state-of-the-art
cushion design, decelerates and reduces end-of-stroke noise.
Figure 1: Cylinder deceleration starts when the cushion
spear enters the cushion seal, creating a chamber of
compressed air metered by an optional Adjustable
Cushion Needle or Fixed Cushion (orifice).
Figure 2: The final inertia load is absorbed by the
Bumper, providing that final end-of-stroke “Soft Touch”.
11/2"_5" bore
Figure 2
Figure 1
Note: 11/8" bore configuration.
Operating PSI will control the reduction of total cylinder stroke.
The chart shows the approximate average (new cylinder) stroke
reductions in inches based on PSI.
Stroke length will vary based on PSI.
Not recommended for applications that require 100% repeatable
stroke increment.
Bore
0 PSI
20 PSI
40 PSI
60 PSI
80 PSI
100 PSI
1 1/8 "
.12
.08
.06
.03
.02
0
1 1/2 "
.12
.04
.03
.02
.01
0
2"
.12
.10
.06
.03
.02
0
2 1/2 "
.16
.10
.08
.04
.02
0
3 1/4"
.18
.10
.08
.04
.02
0
4"
.20
.14
.10
.06
.02
0
5"
.22
.14
.10
.06
.02
0
Available on 1-1/8" thru 5" bores.
(Not available in 1-1/2" bore with 1" diameter rod.)
Can be incorporated into cylinders with no cushions,
fixed cushions or adjustable cushions.
See ACT-2-26 for complete instructions on how to order cylinders.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-3
Series SS Actuators
Lubrication:
Side Loading:
Series SS
None required
Norgren Air Cylinders are rated for “no lube added”
service. All internal components are lubricated at time
of assembly with a Teflon® based grease.
Cylinders are specifically designed to push and pull.
Side loading of the piston rod should be avoided to
ensure maximum operating performance and life.
Care should be taken during installation to
properly align the load to be moved with the center
line of the cylinder. The use of a rod alignment coupler
(see ACT-2-24) is strongly recommended whenever
possible.
Series D
with Viton Seals
-40°F to 200°F
(-40°C to 93°C)
-20°F to 250°F
(-29°C to 121°C)
-20°F to 400°F
(-29°C to 204°C)
Materials:
Head and End Caps: 304 stainless steel
Tube: 304 stainless steel
Piston Rod: hard chrome plated 303 stainless steel
Piston: 2011-T451 aluminum with Teflon®
composite wearband
Rod Bearings: 304 stainless steel with Teflon®
composite wearband
Seals: urethane rod seal and wiper, nitrile piston seals
Tie Rods: 303 stainless steel
Operating Pressure:
250 PSIG Air (17.2 Bar)
400 PSIG Hydraulic (27.6 Bar)
Bore Sizes: 1-1/8", 1-1/2", 2", 2-1/2", 3-1/4",
4", 5", 6", 8"
Supply:
Filtered compressed air to 250 PSI
Petroleum based hydraulic fluid to 400 PSI
Cylinder Weights
Mounting Code
Bore
Rod
01, 02, 03, 10, 11, 22 & 30
11/8"
(28.58)
11/2"
(38.10)
2"
(50.80)
21/2"
(63.50)
31/4"
(82.55)
4"
(101.60)
5"
(127.00)
6"
(152.40)
8"
(203.20)
04 & 05
*06 & 17
15 & 16
3/8"
(9.53)
1.1
(.49)
1.5
(.68)
1.3
(.58)
–
–
.13
(.05)
1/2"
(12.70)
1.2
(.54)
1.6
(.72)
1.4
(.63)
–
–
.15
(.06)
5/8"
(15.88)
3.3
(1.49)
4.0
(1.81)
3.8
(1.72)
3.8
(1.72)
.3
(.13)
1"
(25.40)
4.1
(1.85)
4.8
(2.17)
4.6
(2.08)
4.6
(2.08)
.4
(.18)
5/8"
(15.88)
5.9
(2.67)
7.0
(3.17)
6.4
(2.90)
6.4
(2.90)
.5
(.22)
1"
(25.40)
6.3
(2.85)
7.4
(3.35)
6.8
(2.94)
6.8
(3.08)
.6
(.27)
5/8"
(15.88)
8.0
(3.62)
9.5
(4.30)
8.7
(3.94)
8.5
(3.85)
.6
(.27)
1"
(25.40)
8.5
(3.85)
10.0
(4.53)
9.2
(4.17)
9.0
(4.08)
.7
(.31)
1"
(25.40)
15.0
(6.80)
18.7
(8.48)
16.0
(7.25)
15.5
(7.03)
.8
(.36)
13/8"
(34.93)
15.5
(7.03)
19.2
(8.70)
16.5
(7.48)
16.0
(7.25)
1.0
(.45)
1"
(25.40)
23.0
(10.43)
28.0
(12.70)
27.0
(12.24)
23.5
(10.65)
1.0
(.45)
13/8"
(34.93)
23.5
(10.65)
28.5
(12.92)
27.5
(12.47)
24.0
(10.88)
1.2
(.54)
1"
(25.40)
34.5
(15.64)
42.0
(19.05)
41.0
(18.59)
35.0
(15.87)
1.1
(.49)
13/8"
(34.93)
35.0
(15.87)
42.5
(19.27)
41.5
(18.82)
35.5
(16.10)
1.3
(.58)
13/8"
(34.93)
60.0
(27.21)
71.9
(32.61)
69.0
(31.29)
61.2
(27.76)
1.5
(.68)
13/4"
(44.45)
62.0
(28.12)
73.9
(33.52)
71.0
(32.20)
63.2
(28.66)
1.7
(.77)
13/8"
(34.93)
79.0
(35.83)
–
–
88.0
(39.91)
80.2
(36.37)
2.0
(.90)
13/4"
(44.45)
82.0
(37.19)
–
–
91.0
(41.27)
83.2
(37.73)
2.3
(1.04)
*Weight includes pivot pin
Breakaway Pressures in PSI
Listed are the average breakaway pressures
in PSI for all Series SS and Series D cylinder
bore sizes.
If your application requires a lower
breakaway pressure than indicated for a
particular bore size, consult the factory.
ACT-2-4
Add Per Inch
of Stroke
Bore
SS Series
D Series
Extend
Retract
Extend
11/8"
6
7
3
Retract
4
11/2", 2", 21/2"
5
6
3
4
31/4", 4"
4
5
2
3
5", 6", 8"
3
4
1
2
Note: Breakaway pressures were established with the cylinders mounted horizontally
and no load on the piston rod.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series SS Actuators
Piston Rod Diameter Selection:
Applications requiring long extend (push) strokes may require oversize piston rod diameters to prevent buckling. To determine the correct rod diameter for your
application follow these simple steps:
1. Select the thrust from the Cylinder Force and Volume Chart that is required for your application.
Thrust = Piston Surface Area x Operating Pressure
2. From the Cylinder Mounting Diagrams select the mounting style being used.
3. With the piston rod fully extended, calculate the value of D (in inches) using the formula shown or the cylinder mounting diagram selected in step #2.
4. Locate the value of D (in inches) at the bottom of the Selection Chart. Enter the chart at this point and move vertically upward until intersecting with the horizontal
line representing the required thrust which was selected in step #1. The band within which these lines intersect represents the minimum recommended
piston rod diameter.
Stop Tube Selection:
Stop tubes enhance the transverse load carrying capability of a long stroke cylinder by increasing the distance between the piston and rod bearing at full extension. When
the value of D (calculated from the piston rod diameter selection instructions above) is less than 40", a stop tube is not required. However, if D is 40" or more, 1" of stop
tube is recommended for every 10" (or fraction thereof) over 40".
Cylinder Mounting Diagrams
Firmly Guided Rod End
Head Trunnion
Unsupported Rod End
S
D
S
S
D=4S
D=D
D=1/2S
Supported Rod End
D=S
d
Supported Rod End
Firmly Guided Rod End
Unsupported Rod End
S
S
D=1/2S
D=S
Cap Clevis or Cap Trunnion
S
D
D=4S
D=D
d
Selection Chart
Cylinder Force and Volume Charts
Extend Forces in pounds (newtons)
Bore
50000
40000
150 (10)
149 (664)
200 (14)
200 (890)
Volume
Cu Ft (cm3)
Displacement
Per Inch
(16)
.00057
177 (786)
266 (1179)
353 (1570)
.00102
(29)
314 (1398)
471 (2097)
628 (2793)
.00182
(52)
737 (3277)
982 (4368)
.00284
(80)
1245 (5538)
1659 (7379)
.00480
(136)
11/8"
Piston
Area
.99 (6.41)
PSI (bar)
80 (6)
100 (7)
80 (354)
99 (442)
40
40
(3)
(177)
60 (4)
60 (265)
11/2"
1.77 (11.40)
71
(315)
106 (472)
142 (629)
2"
3.14 (20.27) 126
(559)
189 (839)
251 (1119)
21/2"
4.91 (31.67) 196
(874)
295 (1311)
393 (1748)
491 (2185)
31/4"
8.30 (53.32) 332
(1477)
498 (2215)
664 (2953)
830 (3692)
4"
12.57 (81.07) 503
(2237)
754 (3355)
1005 (4473)
1257 (5592)
1886 (8388)
2513 (11178)
.00727
(206)
5"
19.64 (126.71) 785
(3491) 1178 (5240)
1571 (6988)
1964 (8736)
2946 (13104)
3928 (17472)
.01137
(322)
6"
28.27 (182.39) 1130
(5026) 1696 (7544)
2262 (10061) 2827 (12574) 4240 (18860)
5654 (25149)
.01837
(520)
8"
50.26 (324.26) 2010
(8940) 3015 (13411) 4020 (17881) 5026 (22356) 7539 (33533) 10052 (44711)
.02227
(631)
30000
20000
10000
8000
6000
5000
4000
3000
2000
1000
Deduct these Forces for Retract Strokes
Rod
(.72)
40
5
(3)
(20)
60 (4)
7 (30)
PSI (bar)
80 (6)
100 (7)
9 (40)
11 (50)
.196 (1.26)
8
(35)
12 (52)
16 (70)
20 (87)
.307 (1.98)
12
(53)
18 (80)
25 (111)
31 (138)
.785 (5.06)
31
(138)
47 (209)
63 (280)
70 (351)
13/8"
1.485 (9.58)
59
(262)
89 (396)
119 (529)
149 (663)
13/4"
2.404 (15.51)
95
(423)
144 (641)
192 (854)
240 (1068)
3/ "
8
1/ "
2
5/ "
8
1"
Rod
Area
.112
800
150 (10)
17 (75)
200 (14)
22 (100)
30 (131)
Volume
Cu Ft (cm3)
Displacement
Per Inch
(2)
.00007
600
500
400
300
1-3/4"
200
39 (174)
.00011
(3)
46 (205)
61 (271)
.00018
(5)
118 (525)
157 (698)
.00045
(13)
100
222 (997)
297 (1321)
.00086
(24)
360 (1601)
480 (2135)
.00139
(39)
80
70
60
50
1-3/8"
200
150
1"
100
5/8"
50
0
Axial
thrust
in lbs
Value of D in inches
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-5
Series SS Actuators
Actuator with 01 (MX0) Basic
● NFPA (MX0) 01 Basic Mount
available in 1-1/2" thru 8" bore sizes.
● Precision machined 300 Series
stainless steel components.
● Cylinders rated to 250 PSI air,
(See pages ACT-2-34/35 for ordering information.)
■ ■ ■ ■ ■
1
S
D
2
3
4
–
■ 0 1
5
6
7
–
8
■ ■ ■ ■ ■
9
10 11 12 13
Series SS
Series D
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"
8"
No Options
00
Magnetic
Piston Only**
90
Special∆
98
**See ACT-2-34/35.
∆
For any cylinder modifications not
listed use “98” and please specify.
Single Rod End
C
D
E
F
G
L
J
M
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
Full Inches in Strokes
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
xx
99" Stroke
Special
Fractional Increments of Stroke
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Rod Size & Style
Standard
A Male KK
B Male CC*
C Full Dia. Thd.
D Female XX
E Studded
X Special
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
†
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
2†
B
G
N
C
H
M
2
B
G
3
C
H
Brookville, OH USA
10
11
15
16
XX
(As viewed from
rod end)
Phone 937-833-4033
D
J
P
E
K
R
4
D
J
X
Head Square (ME3)*
Cap Square (ME4)*
Head Trunnion (MT1)
Cap Trunnion (MT2)
Special
1
4
2
3
ACT-2-6
4
U
X
Port and Cushion
Needle Positions
*On 11/2", 2" & 21/2" Bore Sizes with
5/8" Rod, CC = 7/16 - 20 (NFPA)
3
A
Standard position
Ports
Position
1†
Standard
A
Oversized*
E
Special
†
Standard position
*NFPA
Mounting Options
01 Basic (MX0)
02 Bottom Tap (MS4)
04 Front Flange (MF1)
05 Rear Flange (MF2)
*8" Bores Only
Oversized
H
Male KK
J
Male CC
K
Full Dia. Thd.
M Female XX
N
Studded
1
A
1
3
5
6
X
www.norgren.com
Series SS Actuators
EE NPT (2)
∅ B Bushing
Y
Y
P + Stroke
∅ MM
KK
Thds.
A
Standard
& Optional Rod Ends
KK Thds.
D
Across
Flats
∅B
ZB + Stroke
∅B
CC
Thds.
K
LB + Stroke
VF
RE
ESq.
∅B
J
G
C
D
Across Flats
∅B
XX
Thds.
FF
Thds.
XX
Thds.
∅B
A Deep
A
A
C
VF
(Small Male)
C
VF
Style #1
A
A
C
C
VF
Style #2
(Optional Male)
C
VF
VF
Style #3
Style #4
(Small Female)
(Optional Full Diameter Threads)
Style #5
(Optional Studded)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50)
31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
ø Rod Std.
(MM) O.S.
Std.
A
O.S.
Std.
B
O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
Std.
EE
O.S.
Std.
FF
O.S.
G
J
K
Std.
KK
O.S.
LB
P
RE
Std.
VF
O.S.
Std.
XX
O.S.
Std.
Y
O.S.
Std.
ZB
O.S.
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(50.80)
2.000
(6.35)
.250
(9.53)
.375
5/8 –18
1 –14
(38.10)
1.500
(25.40)
1.000
(11.91)
.469
1/2 – 20
3/4 – 16
(92.08)
3.625
(53.98)
2.125
(36.32)
1.430
(15.88)
.625
(22.23)
.875
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.094 (129.39)
5.469 (138.91)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(63.50)
2.500
(6.35)
.250
(9.53)
.375
5/8 –18
1 –14
(38.10)
1.500
(25.40)
1.000
(13.49)
.531
1/2 – 20
3/4 – 16
(92.08)
3.625
(53.98)
2.125
(46.74)
1.840
(15.88)
.625
(22.23)
.875
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.156 (130.96)
5.531 (140.49)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(76.20)
3.000
(6.35)
.250
(9.53)
.375
5/8 –18
1 –14
(38.10)
1.500
(25.40)
1.000
(13.49)
.531
1/2 – 20
3/4 – 16
(95.25)
3.750
(57.15)
2.250
(55.63)
2.190
(15.88)
.625
(22.23)
.875
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.281 (134.14)
5.656 (143.66)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
(95.25)
3.750
(9.53)
.375
(12.70)
.500
1 –14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(15.88)
.625
3/4 – 16
1 – 14
4.250 (107.95)
(66.68)
2.625
(70.10)
2.760
(22.23)
.875
(25.40)
1.000
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.250 (158.75)
6.500 (165.10)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
4.500 (114.30)
(9.53)
.375
(12.70)
.500
1 –14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(15.88)
.625
3/4 – 16
1 – 14
4.250 (107.95)
(66.68)
2.625
(84.33)
3.320
(22.23)
.875
(25.40)
1.000
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.250 (158.75)
6.500 (165.10)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
5.500 (139.70)
(9.53)
.375
(12.70)
.500
1 –14
13/8 – 12
(44.45)
1.750
(38.10)
1.500
(21.08)
.830
3/4 – 16
1 – 14
4.500 (114.30)
(73.03)
2.875
4.100 (104.14)
(22.23)
.875
(25.40)
1.000
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.705 (170.31)
6.955 (176.66)
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.80)
2.000
(60.33)
2.375
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(12.70)
.500
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(21.08)
.830
1 – 14
11/4 – 12
5.000 (127.00)
(76.20)
3.000
4.880 (123.95)
(25.40)
1.000
(28.58)
1.125
1 – 14
11/4 – 12
(73.03)
2.875
(79.38)
3.125
7.455 (189.36)
7.705 (195.71)
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.80)
2.000
(60.33)
2.375
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
8.500 (215.90)
(12.70)
.500
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.1)
1.500
(25.40)
1.000
1 – 14
11/4 – 12
5.125 (130.18)
(79.38)
3.125
6.435 (163.45)
(25.40)
1.000
(28.58)
1.125
1 – 14
11/4 – 12
(73.03)
2.875
(79.38)
3.125
7.750 (196.85)
8.000 (203.20)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-7
Series SS Actuators
Actuator with 02 (MS4) Bottom Tap
● NFPA (MS4) 02 Bottom Tap Mount
■ ■ ■ ■ ■
1
S
D
2
3
4
–
■ 0 2
5
6
7
–
8
■ ■ ■ ■ ■
9
10 11 12 13
Series SS
Series D
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"
8"
No Options
00
Magnetic
Piston Only**
90
Special∆
98
**See ACT-2-34/35.
∆
Single Rod End
C
D
E
F
G
L
J
M
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
xx
99" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Rod Size & Style
Standard
A Male KK
B Male CC*
C Full Dia. Thd.
D Female XX
E Studded
X Special
11/2",
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
1
2†
3
4
D
J
P
E
K
R
A
B
G
N
C
H
M
U
X
†
Standard position
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Ports
Position
1†
Standard
A
Oversized*
E
Special
†
Standard position
*NFPA
Mounting Options
01 Basic (MX0)
02 Bottom Tap (MS4)
*8" Bores Only
Oversized
H
Male KK
J
Male CC
K
Full Dia. Thd.
M Female XX
N
Studded
2
B
G
3
C
H
10
11
15
16
XX
(As viewed from
rod end)
21/2"
Head Square (ME3)*
Cap Square (ME4)*
Head Trunnion (MT1)
Cap Trunnion (MT2)
Special
1
4
Phone 937-833-4033
2
3
Brookville, OH USA
4
D
J
X
Port and Cushion
Needle Positions
*On
2" &
Bore Sizes with
5/8" Rod, CC = 7/16 - 20 (NFPA)
ACT-2-8
A
1
3
5
6
X
www.norgren.com
Series SS Actuators
EE NPT (2)
∅ B Bushing
Y
P + Stroke
∅ MM
KK
Thds.
ESq.
A
D
(Flats)
Standard &
Optional Rod Ends
KK Thds.
D
Across
Flats
TN
RE
J
G
C
NT Tap
TK Deep
K
SN + Stroke
XT
LB + Stroke
VF
ZB + Stroke
∅B
∅B
∅B
CC
Thds.
∅B
XX
Thds.
FF
Thds.
XX
Thds.
∅B
A Deep
A
A
C
VF
Style #1
(Small Male)
A
A
C
C
VF
C
VF
Style #2
(Optional Male)
C
VF
VF
Style #3
Style #4
(Small Female)
Style #5
(Optional Studded)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50)
31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
ø Rod Std.
(MM) O.S.
Std.
A
O.S.
Std.
B
O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
Std.
EE
O.S.
Std.
FF
O.S.
G
J
K
Std.
KK
O.S.
LB
NT
P
RE
SN
TK
TN
Std.
VF
O.S.
Std.
XT
O.S.
Std.
XX
O.S.
Std.
Y
O.S.
Std.
ZB
O.S.
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(50.80)
2.000
(6.35)
.250
(9.53)
.375
5/8 –18
1 –14
(38.10)
1.500
(25.40)
1.000
(11.91)
.469
1/2 – 20
3/4 – 16
(92.08)
3.625
1/4 – 20
(53.98)
2.125
(36.32)
1.430
(57.15)
2.250
(9.53)
.375
(15.88)
.625
(15.88)
.625
(22.23)
.875
(49.20)
1.937
(58.72)
2.312
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.094 (129.39)
5.469 (138.91)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(63.50)
2.500
(6.35)
.250
(9.53)
.375
5/8 –18
1 –14
(38.10)
1.500
(25.40)
1.000
(13.49)
.531
1/2 – 20
3/4 – 16
(92.08)
3.625
5/16 – 18
(53.98)
2.125
(46.74)
1.840
(57.15)
2.250
(12.70)
.500
(22.23)
.875
(15.88)
.625
(22.23)
.875
(49.20)
1.937
(58.72)
2.312
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.156 (130.96)
5.531 (140.49)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(76.20)
3.000
(6.35)
.250
(9.53)
.375
5/8 –18
1 –14
(38.10)
1.500
(25.40)
1.000
(13.49)
.531
1/2 – 20
3/4 – 16
(95.25)
3.750
3/8 – 16
(57.15)
2.250
(55.63)
2.190
(60.33)
2.375
(15.88)
.625
(31.75)
1.250
(15.88)
.625
(22.23)
.875
(49.20)
1.937
(58.72)
2.312
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.281 (134.14)
5.656 (143.66)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
(95.25)
3.750
(9.53)
.375
(12.70)
.500
1 –14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(15.88)
.625
3/4 – 16
1 – 14
4.250 (107.95)
1/2 – 13
(66.68)
2.625
(70.10)
2.760
(66.68)
2.625
(19.05)
.750
(38.10)
1.500
(22.23)
.875
(25.40)
1.000
(61.90)
2.437
(68.25)
2.687
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.250 (158.75)
6.500 (165.10)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
4.500 (114.30)
(9.53)
.375
(12.70)
.500
1 –14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
(15.88)
.625
3/4 – 16
1 – 14
4.250 (107.95)
1/2 – 13
(66.68)
2.625
(84.33)
3.320
(66.68)
2.625
(19.05)
.750
(52.37)
2.062
(22.23)
.875
(25.40)
1.000
(61.90)
2.437
(68.25)
2.687
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.250 (158.75)
6.500 (165.10)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
5.500 (139.70)
(9.53)
.375
(12.70)
.500
1 –14
13/8 – 12
(44.45)
1.750
(38.10)
1.500
(21.08)
.830
3/4 – 16
1 – 14
4.500 (114.30)
5/8 – 11
(73.03)
2.875
4.100 (104.14)
(73.03)
2.875
(25.40)
1.000
(68.25)
2.687
(22.23)
.875
(25.40)
1.000
(61.90)
2.437
(68.25)
2.687
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.705 (170.31)
6.955 (176.66)
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.80)
2.000
(60.33)
2.375
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(12.70)
.500
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
(21.08)
.830
1 – 14
11/4 – 12
5.000 (127.00)
3/4 – 10
(76.20)
3.000
4.880 (123.95)
(79.38)
3.125
(28.58)
1.125
(82.55)
3.250
(25.40)
1.000
(28.58)
1.125
(71.42)
2.812
(77.77)
3.062
1 – 14
11/4 – 12
(73.03)
2.875
(79.38)
3.125
7.455 (189.36)
7.705 (195.71)
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.80)
2.000
(60.33)
2.375
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
8.500 (215.90)
(12.70)
.500
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.1)
1.500
(25.40)
1.000
1 – 14
11/4 – 12
5.125 (130.18)
3/4 – 10
(79.38)
3.125
6.435 (163.45)
(82.55)
3.250
(28.58)
1.125
4.500 (114.30)
(25.40)
1.000
(28.58)
1.125
(71.42)
2.812
(77.77)
3.062
1 – 14
11/4 – 12
(73.03)
2.875
(79.38)
3.125
7.750 (196.85)
8.000 (203.20)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-9
Series SS Actuators
Actuator with 04 (MF1) Front Flange
● NFPA (MF1) 04 Front Flange Mount
■ ■ ■ ■ ■
1
S
D
2
3
4
–
■ 0 4
5
6
7
–
8
■ ■ ■ ■ ■
9
10 11 12 13
Series SS
Series D
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"
8"
No Options
00
Magnetic
Piston Only**
90
Special∆
98
**See ACT-2-34/35.
∆
Single Rod End
C
D
E
F
G
L
J
*
*See ACT-2-16/17
for ME3 mount
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
xx
99" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Rod Size & Style
Standard
A Male KK
B Male CC*
C Full Dia. Thd.
D Female XX
E Studded
X Special
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
1
2†
3
4
D
J
P
E
K
R
A
B
G
N
C
H
M
U
X
†
Standard position
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Ports
Position
1†
Standard
A
Oversized*
E
Special
†
Standard position
*NFPA
Mounting Options
01 Basic (MX0)
02 Bottom Tap (MS4)
*8" Bores Only
Oversized
H
Male KK
J
Male CC
K
Full Dia. Thd.
M Female XX
N
Studded
2
B
G
3
C
H
10
11
15
16
XX
Head Square (ME3)*
Cap Square (ME4)*
Head Trunnion (MT1)
Cap Trunnion (MT2)
Special
(As viewed from
rod end)
1
4
Phone 937-833-4033
2
3
Brookville, OH USA
4
D
J
X
Port and Cushion
Needle Positions
5/8" Rod, CC = 7/16 - 20 (NFPA)
ACT-2-10
A
1
3
5
6
X
www.norgren.com
Series SS Actuators
FB
EE NPT (2)
∅ B Bushing
Y
P + Stroke
∅ MM
KK
Thds.
E
R
A
D
Across Flats
TF
Standard &
Optional Rod Ends
KK Thds.
D
Across
Flats
J
K
VF
LB + Stroke
W
UF
FH
∅B
∅B
G
C
ZB + Stroke
∅B
CC
Thds.
∅B
XX
Thds.
FF
Thds.
XX
Thds.
∅B
A Deep
A
A
C
VF
C
VF
Style #1
(Small Male)
A
A
C
C
VF
Style #2
(Optional Male)
C
VF
VF
Style #3
Style #4
(Small Female)
Style #5
(Optional Studded)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50)
31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
ø Rod Std.
(MM) O.S.
Std.
A
O.S.
Std.
B
O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
Std.
EE
O.S.
FB
Std.
FF
O.S.
FH
G
J
K
Std.
KK
O.S.
LB
P
R
TF
UF
Std.
VF
O.S.
Std.
W
O.S.
Std.
XX
O.S.
Std.
Y
O.S.
Std.
ZB
O.S.
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(50.80)
2.000
(6.35)
.250
(9.53)
.375
(7.92)
.312
5/8 –18
1 –14
(9.53)
.375
(38.10)
1.500
(25.40)
1.000
(11.91)
.469
1/2 – 20
3/4 – 16
(92.08)
3.625
(53.98)
2.125
(36.32)
1.430
(69.85)
2.750
(85.73)
3.375
(15.88)
.625
(22.23)
.875
(15.88)
.625
(25.40)
1.000
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.094 (129.39)
5.469 (138.91)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(63.50)
2.500
(6.35)
.250
(9.53)
.375
(9.53)
.375
5/8 –18
1 –14
(9.53)
.375
(38.10)
1.500
(25.40)
1.000
(13.49)
.531
1/2 – 20
3/4 – 16
(92.08)
3.625
(53.98)
2.125
(46.74)
1.840
(85.73)
3.375
4.125 (104.78)
(15.88)
.625
(22.23)
.875
(15.88)
.625
(25.40)
1.000
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.156 (130.96)
5.531 (140.49)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(76.20)
3.000
(6.35)
.250
(9.53)
.375
(9.53)
.375
5/8 –18
1 –14
(9.53)
.375
(38.10)
1.500
(25.40)
1.000
(13.49)
.531
1/2 – 20
3/4 – 16
(95.25)
3.750
(57.15)
2.250
(55.63)
2.190
(98.43)
3.875
4.625 (117.48)
(15.88)
.625
(22.23)
.875
(15.88)
.625
(25.40)
1.000
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.281 (134.14)
5.656 (143.66)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
(95.25)
3.750
(9.53)
.375
(12.70)
.500
(11.10)
.437
1 –14
13/8 – 12
(15.88)
.625
(44.45)
1.750
(31.75)
1.250
(15.88)
.625
3/4 – 16
1 – 14
4.250 (107.95)
(66.68)
2.625
(70.10)
2.760
4.687 (119.08)
5.500 (139.70)
(22.23)
.875
(25.40)
1.000
(19.05)
.750
(25.40)
1.000
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.250 (158.75)
6.500 (165.10)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
4.500 (114.30)
(9.53)
.375
(12.70)
.500
(11.10)
.437
1 –14
13/8 – 12
(15.88)
.625
(44.45)
1.750
(31.75)
1.250
(15.88)
.625
3/4 – 16
1 – 14
4.250 (107.95)
(66.68)
2.625
(84.33)
3.320
5.437 (138.10)
6.250 (158.75)
(22.23)
.875
(25.40)
1.000
(19.05)
.750
(25.40)
1.000
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.250 (158.75)
6.500 (165.10)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
5.500 (139.70)
(9.53)
.375
(12.70)
.500
(14.27)
.562
1 –14
13/8 – 12
(15.88)
.625
(44.45)
1.750
(38.10)
1.500
(21.08)
.830
3/4 – 16
1 – 14
4.500 (114.30)
(73.03)
2.875
4.100 (104.14)
6.625 (168.28)
7.625 (193.68)
(22.23)
.875
(25.40)
1.000
(19.05)
.750
(25.40)
1.000
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.705 (170.31)
6.955 (176.66)
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.80)
2.000
(60.33)
2.375
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(12.70)
.500
(19.05)
.750
(14.27)
.562
13/8 – 12
13/4 – 12
(19.05)
.750
(50.80)
2.000
(38.10)
1.500
(21.08)
.830
1 – 14
11/4 – 12
5.000 (127.00)
(76.20)
3.000
4.880 (123.95)
7.625 (193.68)
8.625 (219.08)
(25.40)
1.000
(28.58)
1.125
(22.23)
.875
(28.58)
1.125
1 – 14
11/4 – 12
(73.03)
2.875
(79.38)
3.125
7.455 (189.36)
7.705 (195.71)
(41.28)
1.625
(50.80)
2.000
(50.80)
2.000
(60.33)
2.375
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
8.500 (215.90)
(12.70)
.500
(19.05)
.750
(17.45)
.687
13/8 – 12
13/4 – 12
–
(50.80)
2.000
(44.45)
1.750
(25.40)
1.000
1 – 14
11/2 – 12
5.125 (130.18)
(79.38)
3.125
7.570 (192.28)
–
–
(25.40)
1.000
(28.58)
1.125
(41.28)
1.625
(47.63)
1.875
1 – 14
11/4 – 12
(73.03)
2.875
(79.38)
3.125
7.750 (196.85)
8.000 (203.20)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-11
Series SS Actuators
Actuator with 05 (MF2) Rear Flange
● NFPA (MF2) 05 Rear Flange Mount
■ ■ ■ ■ ■
1
S
D
2
3
4
–
■ 0 5
5
6
7
–
8
■ ■ ■ ■ ■
9
10 11 12 13
Series SS
Series D
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"
8"
No Options
00
Magnetic
Piston Only**
90
Special∆
98
**See ACT-2-34/35.
∆
Single Rod End
C
D
E
F
G
L
J
*
*See ACT-2-16/17
for ME3 mount
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
xx
Rod Size & Style
Standard
A Male KK
B Male CC*
C Full Dia. Thd.
D Female XX
E Studded
X Special
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
99" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
11/2",
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
†
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
2†
B
G
N
C
H
M
2
B
G
3
C
H
10
11
15
16
XX
Brookville, OH USA
Phone 937-833-4033
E
K
R
4
D
J
Head Square (ME3)*
Cap Square (ME4)*
Head Trunnion (MT1)
Cap Trunnion (MT2)
Special
1
4
2
3
ACT-2-12
D
J
P
X
(As viewed from
rod end)
*On
2" &
Bore Sizes with
5/8" Rod, CC = 7/16 - 20 (NFPA)
4
U
X
Port and Cushion
Needle Positions
21/2"
3
A
Standard position
Ports
Position
1†
Standard
A
Oversized*
E
Special
†
Standard position
*NFPA
Mounting Options
01 Basic (MX0)
02 Bottom Tap (MS4)
*8" Bores Only
Oversized
H
Male KK
J
Male CC
K
Full Dia. Thd.
M Female XX
N
Studded
1
A
1
3
5
6
X
www.norgren.com
Series SS Actuators
∅ B Bushing
Y
FB
P + Stroke
EE
NPT (2)
∅ MM
KK
Thds.
E
R
A
J
G
C
FH
TF
LB + Stroke
VF
UF
ZF + Stroke
KK Thds.
D
Across
Flats
∅B
∅B
∅B
CC
Thds.
∅B
XX
Thds.
FF
Thds.
XX
Thds.
∅B
A Deep
A
A
C
VF
C
VF
Style #1
(Small Male)
A
A
C
C
VF
Style #2
(Optional Male)
C
VF
VF
Style #3
Style #4
(Small Female)
Style #5
(Optional Studded)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50)
31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
ø Rod Std.
(MM) O.S.
Std.
A
O.S.
Std.
B
O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
Std.
EE
O.S.
FB
Std.
FF
O.S.
FH
G
J
Std.
KK
O.S.
LB
.P
R
TF
UF
Std.
VF
O.S.
Std.
XX
O.S.
Std.
Y
O.S.
Std.
ZF
O.S.
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(50.80)
2.000
(6.35)
.250
(9.53)
.375
(7.92)
.312
5/8 –18
1 –14
(9.53)
.375
(38.10)
1.500
(25.40)
1.000
1/2 – 20
3/4 – 16
(92.08)
3.625
(53.98)
2.125
(36.32)
1.430
(69.85)
2.750
(85.73)
3.375
(15.88)
.625
(22.23)
.875
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.000 (127.00)
5.375 (136.53)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(63.50)
2.500
(6.35)
.250
(9.53)
.375
(9.53)
.375
5/8 –18
1 –14
(9.53)
.375
(38.10)
1.500
(25.40)
1.000
1/2 – 20
3/4 – 16
(92.08)
3.625
(53.98)
2.125
(46.74)
1.840
(85.73)
3.375
4.125 (104.78)
(15.88)
.625
(22.23)
.875
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.000 (127.00)
5.375 (136.53)
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
7/16 – 20
7/8 –14
(12.70)
.500
(20.62)
.812
(76.20)
3.000
(6.35)
.250
(9.53)
.375
(9.53)
.375
5/8 –18
1 –14
(9.53)
.375
(38.10)
1.500
(25.40)
1.000
1/2 – 20
3/4 – 16
(95.25)
3.750
(57.15)
2.250
(55.63)
2.190
(98.43)
3.875
4.625 (117.48)
(15.88)
.625
(22.23)
.875
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
5.125 (130.18)
5.500 (139.70)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
(95.25)
3.750
(9.53)
.375
(12.70)
.500
(11.10)
.437
1 –14
13/8 – 12
(15.88)
.625
(44.45)
1.750
(31.75)
1.250
3/4 – 16
1 – 14
4.250 (107.95)
(66.68)
2.625
(70.10)
2.760
4.687 (119.08)
5.500 (139.70)
(22.23)
.875
(25.40)
1.000
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.250 (158.75)
6.500 (165.10)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
4.500 (114.30)
(9.53)
.375
(12.70)
.500
(11.10)
.437
1 –14
13/8 – 12
(15.88)
.625
(44.45)
1.750
(31.75)
1.250
3/4 – 16
1 – 14
4.250 (107.95)
(66.68)
2.625
(84.33)
3.320
5.437 (138.10)
6.250 (158.75)
(22.23)
.875
(25.40)
1.000
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.250 (158.75)
6.500 (165.10)
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
7/8 –14
11/4 – 12
(20.62)
.812
(28.58)
1.125
5.500 (139.70)
(9.53)
.375
(12.70)
.500
(14.27)
.562
1 –14
13/8 – 12
(15.88)
.625
(44.45)
1.750
(38.10)
1.500
3/4 – 16
1 – 14
4.500 (114.30)
(73.03)
2.875
4.100 (104.14)
6.625 (168.28)
7.625 (193.68)
(22.23)
.875
(25.40)
1.000
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
6.500 (165.10)
6.750 (171.45)
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.80)
2.000
(60.33)
2.375
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
(12.70)
.500
(19.05)
.750
(14.27)
.562
13/8 – 12
13/4 – 12
(19.05)
.750
(50.80)
2.000
(38.10)
1.500
1 – 14
11/4 – 12
5.000 (127.00)
(76.20)
3.000
4.880 (123.95)
7.625 (193.68)
8.625 (219.08)
(25.40)
1.000
(28.58)
1.125
1 – 14
11/4 – 12
(73.03)
2.875
(79.38)
3.125
7.375 (187.33)
7.625 (193.68)
(41.28)
1.625
(50.80)
2.000
(50.80)
2.000
(60.33)
2.375
(15.88)
.625
(19.05)
.750
11/4 – 12
11/2 – 12
(28.58)
1.125
(38.10)
1.500
8.500 (215.90)
(12.70)
.500
(19.05)
.750
(17.45)
.687
13/8 – 12
13/4 – 12
–
(50.80)
2.000
(44.45)
1.750
1 – 14
11/2 – 12
5.125 (130.18)
(79.38)
3.125
7.570 (192.28)
–
–
(25.40)
1.000
(28.58)
1.125
1 – 14
11/4 – 12
(73.03)
2.875
(79.38)
3.125
6.750 (171.68)
7.000 (177.80)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-13
Series SS Actuators
Actuator with 06 (MP1) Cap
Fixed Clevis
■ ■ ■ ■ ■
1
S
D
2
3
4
5
–
■ 0 6
6
7
–
8
■ ■ ■ ■ ■
9
10 11 12 13
Series SS
Series D
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"
8"
No Options
00
Magnetic
Piston Only**
90
Special∆
98
**See ACT-24/35.
∆
Single Rod End
C
D
E
F
G
L
J
M
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
xx
99" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Rod Size & Style
Standard
A Male KK
B Male CC*
C Full Dia. Thd.
D Female XX
E Studded
X Special
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
†
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
2†
B
G
N
C
H
M
2
B
G
3
C
H
Brookville, OH USA
10
11
15
16
XX
(As viewed from
rod end)
Phone 937-833-4033
D
J
P
E
K
R
4
D
J
X
Head Square (ME3)*
Cap Square (ME4)*
Head Trunnion (MT1)
Cap Trunnion (MT2)
Special
1
4
2
3
ACT-2-14
4
U
X
Port and Cushion
Needle Positions
5/8" Rod, CC = 7/16 - 20 (NFPA)
3
A
Standard position
Ports
Position
1†
Standard
A
Oversized*
E
Special
†
Standard position
*NFPA
Mounting Options
01 Basic (MX0)
02 Bottom Tap (MS4)
*8" Bores Only
Oversized
H
Male KK
J
Male CC
K
Full Dia. Thd.
M Female XX
N
Studded
1
A
1
3
5
6
X
www.norgren.com
Series SS Actuators
EE NPT (2)
∅ B Bushing
Y
P + Stroke
∅ MM
CD
KK
Thds
A
J
G
C
L
M
CW
VF
CB
CW
ESq.
LB + Stroke
XC + Stroke
KK Thds.
D
Across
Flats
∅B
∅B
∅B
CC
Thds.
∅B
XX
Thds.
FF
Thds.
XX
Thds.
∅B
A Deep
A
A
C
VF
Style #1
(Small Male)
A
A
C
C
VF
C
VF
Style #2
(Optional Male)
C
VF
VF
Style #3
Style #4
(Small Female)
Style #5
(Optional Studded)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50)
31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
ø Rod Std.
(MM) O.S.
Std.
A
O.S.
Std.
B
O.S.
Std.
C
O.S.
CB
Std.
CC
O.S.
CD
CW
Std.
D
O.S.
E
Std.
EE
O.S.
Std.
FF
O.S.
G
J
Std.
KK
O.S.
L
LB
M
P
Std.
VF
O.S.
Std.
XC
O.S.
Std.
XX
O.S.
Std.
Y
O.S.
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
(19.05)
.750
7/16 – 20
7/8 –14
(12.70)
.500
(12.70)
.500
(12.70)
.500
(20.62)
.812
(50.80)
2.000
(6.35)
.250
(9.53)
.375
5/8 –18
1 –14
(38.10)
1.500
(25.40)
1.000
1/2 – 20
3/4 – 16
(19.05)
.750
(92.08)
3.625
(15.88)
.625
(53.98)
2.125
(15.88)
.625
(22.23)
.875
5.375 (136.53)
5.750 (146.05)
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
(19.05)
.750
7/16 – 20
7/8 –14
(12.70)
.500
(12.70)
.500
(12.70)
.500
(20.62)
.812
(63.50)
2.500
(6.35)
.250
(9.53)
.375
5/8 –18
1 –14
(38.10)
1.500
(25.40)
1.000
1/2 – 20
3/4 – 16
(19.05)
.750
(92.08)
3.625
(15.88)
.625
(53.98)
2.125
(15.88)
.625
(22.23)
.875
5.375 (136.53)
5.750 (146.05)
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
(15.88)
.5/8"
(25.40)
.1"
(19.05)
.750
(28.58)
1.125
(28.58)
1.125
(38.10)
1.500
(9.53)
.375
(12.70)
.500
(19.05)
.750
7/16 – 20
7/8 –14
(12.70)
.500
(12.70)
.500
(12.70)
.500
(20.62)
.812
(76.20)
3.000
(6.35)
.250
(9.53)
.375
5/8 –18
1 –14
(38.10)
1.500
(25.40)
1.000
1/2 – 20
3/4 – 16
(19.05)
.750
(95.25)
3.750
(15.88)
.625
(57.15)
2.250
(15.88)
.625
(22.23)
.875
5.500 (139.70)
5.875 (149.23)
7/16 – 20
3/4 – 16
(50.80)
2.000
(60.33)
2.375
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 –14
11/4 – 12
(19.05)
.750
(15.88)
.625
(20.62)
.812
(28.58)
1.125
(95.25)
3.750
(9.53)
.375
(12.70)
.500
1 –14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
3/4 – 16
1 – 14
(31.75)
1.250
4.250 (107.95)
(22.23)
.875
(66.68)
2.625
(22.23)
.875
(25.40)
1.000
6.875 (174.63)
7.125 (180.98)
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 –14
11/4 – 12
(19.05)
.750
(15.88)
.625
(20.62)
.812
(28.58)
1.125
4.500 (114.30)
(9.53)
.375
(12.70)
.500
1 –14
13/8 – 12
(44.45)
1.750
(31.75)
1.250
3/4 – 16
1 – 14
(31.75)
1.250
4.250 (107.95)
(22.23)
.875
(66.68)
2.625
(22.23)
.875
(25.40)
1.000
6.875 (174.63)
7.125 (180.98)
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
(25.40)
.1"
(34.93)
1.3/8"
(28.58)
1.125
(41.28)
1.625
(38.10)
1.500
(50.80)
2.000
(12.70)
.500
(15.88)
.625
(31.75)
1.250
7/8 –14
11/4 – 12
(19.05)
.750
(15.88)
.625
(20.62)
.812
(28.58)
1.125
5.500 (139.70)
(9.53)
.375
(12.70)
.500
1 –14
13/8 – 12
(44.45)
1.750
(38.10)
1.500
3/4 – 16
1 – 14
(31.75)
1.250
4.500 (114.30)
(22.23)
.875
(73.03)
2.875
(22.23)
.875
(25.40)
1.000
7.125 (180.98)
7.375 (187.33)
3/4 – 16
1 – 14
(61.90)
2.437
(68.25)
2.687
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.80)
2.000
(60.33)
2.375
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(19.05)
.750
(28.58)
1.125
(38.10)
1.500
6.500 (165.10)
.500 (112.70)
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.10)
1.500
1 – 14
11/4 – 12
(38.10)
1.500
5.000 (127.00)
(25.40)
1.000
(76.20)
3.000
(25.40)
1.000
(28.58)
1.125
8.125 (206.38)
8.375 (212.73)
1 – 14
11/4 – 12
(73.03)
2.875
(79.38)
3.125
(34.93)
1.3/8"
(44.45)
1.3/4"
(41.28)
1.625
(50.80)
2.000
(50.80)
2.000
(60.33)
2.375
(15.88)
.625
(19.05)
.750
(38.10)
1.500
11/4 – 12
11/2 – 12
(25.40)
1.000
(19.05)
.750
(28.58)
1.125
(38.10)
1.500
8.500 (215.90)
(12.70)
.500
(19.05)
.750
13/8 – 12
13/4 – 12
(50.80)
2.000
(38.1)
1.500
1 – 14
11/4 – 12
(38.10)
1.500
5.125 (130.18)
(25.40)
1.000
(79.38)
3.125
(25.40)
1.000
(28.58)
1.125
8.250 (209.55)
8.500 (215.90)
1 – 14
11/4 – 12
(73.03)
2.875
(79.38)
3.125
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-15
Series SS Actuators
Actuator with 10 (ME3) Head Square and
Actuator with 11 (ME4) Cap Square
● NFPA (ME3) 10 Head Square Mount and
NFPA (ME4) 11 Cap Square Mount
available in 8" bore size only.
■ M ■ ■ ■
1
S
D
2
3
4
5
–
■ 1 0
6 1 1
Series SS
Series D
Bore
8"
7
–
■ ■ ■ ■ ■
9
10 11 12 13
No Options
00
Magnetic
Piston Only**
90
Special∆
98
**See ACT-2-34/35.
∆
8
Single Rod End
M
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
xx
99" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Rod Size & Style
Standard
A Male KK
B Male CC*
C Full Dia. Thd.
D Female XX
E Studded
X Special
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
†
5/8" Rod, CC = 7/16 - 20 (NFPA)
2†
B
G
N
C
H
M
2
B
G
3
C
H
10
11
15
16
XX
E
K
R
4
D
J
Head Square (ME3)*
Cap Square (ME4)*
Head Trunnion (MT1)
Cap Trunnion (MT2)
Special
1
Port and Cushion
Needle Positions
Phone 937-833-4033
D
J
P
X
4
2
3
Brookville, OH USA
4
U
X
(As viewed from
rod end)
ACT-2-16
3
A
Standard position
Ports
Position
1†
Standard
A
Oversized*
E
Special
†
Standard position
*NFPA
Mounting Options
01 Basic (MX0)
02 Bottom Tap (MS4)
*8" Bores Only
Oversized
H Male KK
J
Male CC
K
Full Dia. Thd.
M Female XX
N Studded
1
A
1
3
5
6
X
www.norgren.com
Series SS Actuators
10 (ME3)
EE NPT (2)
∅ B Bushing
FB Holes (4)
P + Stroke
Y
∅ MM
KK
Thds.
A
D
across flats
K
LB + Stroke
VF
R
J
G
C
ZB + Stroke
E Sq.
11 (ME4)
EE NPT (2)
∅ B Bushing
Y
P + Stroke
FB Holes (4)
∅ MM
KK
Thds.
A
G
C
VF
Standard &
Optional Rod Ends
∅B
KK Thds.
A
C
VF
Style #1
(Small Male)
∅B
∅B
XX
Thds.
A Deep
A
C
C
VF
VF
Style #2
Style #3
(Small Female)
(Optional Male)
∅B
XX
Thds.
FF
Thds.
∅B
A
A
C
C
VF
VF
Style #4
ESq.
10 (ME3) Head Square
D
Across
Flats
CC
Thds.
R
J
LB + Stroke
ZF + Stroke
Style #5
(Optional Studded)
Brookville, OH USA
Dimension
ø Rod Std.
(MM) O.S.
Std.
A
O.S.
Std.
B
O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
Std.
EE
O.S.
FB
Std.
FF
O.S.
G
J
K
Std.
KK
O.S.
LB
P
R
Std.
VF
O.S.
Std.
XX
O.S.
Std.
Y
O.S.
Std.
ZB
O.S.
Std.
ZF
O.S.
11 (ME4) Cap Square
8" Bore (203.20)
(34.93)
(44.45)
(41.28)
(50.80)
(50.80)
(60.33)
(15.88)
(19.05)
1.3/8"
1.3/4"
1.625
2.000
2.000
2.375
.625
.750
11/4 – 12
11/2 – 12
11/4 – 12
11/2 – 12
(28.58)
(38.10)
(215.90)
(12.70)
(19.05)
(17.45)
1.125
1.500
8.500
.500
.750
.687
13/8 – 12
13/4 – 12
(50.80)
(44.45)
(25.40)
1 – 14
11/4 – 12
(130.18)
(79.38)
(192.28)
(25.40)
(28.58)
1 – 14
11/4 – 12
(73.03)
(79.38)
(196.85)
(203.30)
–
–
Phone 937-833-4033
(130.18)
(79.38)
(192.28)
(25.40)
(28.58)
5.125
3.125
7.570
1.000
1.125
1 – 14
11/4 – 12
2.875
3.125
7.750
8.000
(50.80)
(44.45)
(25.40)
2.000
1.750
1.000
1 – 14
11/4 – 12
5.125
3.125
7.570
1.000
1.125
(28.58)
(38.10)
(215.90)
(12.70)
(19.05)
(17.45)
1.125
1.500
8.500
.500
.750
.687
13/8 – 12
13/4 – 12
2.000
1.750
1.000
(34.93)
(44.45)
(41.28)
(50.80)
(50.80)
(60.33)
(15.88)
(19.05)
1.3/8"
1.3/4"
1.625
2.000
2.000
2.375
.625
.750
(73.03)
(79.38)
2.875
3.125
–
–
6.750
7.000
www.norgren.com
(171.45)
(177.80)
ACT-2-17
Series SS Actuators
Actuator with 15 (MT1)
Head Trunnion
● NFPA (MT1) 15 Head Trunnion Mount
■ ■ ■ ■ ■
1
S
D
2
3
4
5
–
■ 1 5
6
7
–
8
■ ■ ■ ■ ■
9
10 11 12 13
Series SS
Series D
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"
8"
No Options
00
Magnetic
Piston Only**
90
Special∆
98
**See ACT-2-34/35.
∆
Single Rod End
C
D
E
F
G
L
J
M
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
xx
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
99" Stroke
Special
†
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Rod Size & Style
Standard
A Male KK
B Male CC*
C Full Dia. Thd.
D Female XX
E Studded
X Special
Oversized
H Male KK
J
Male CC
K
Full Dia. Thd.
M Female XX
N Studded
2
B
G
N
N/A
H
N/A
2
B
G
3
C
H
Brookville, OH USA
10
11
15
16
XX
(As viewed from
rod end)
Phone 937-833-4033
D
J
P
N/A
K
N/A
4
D
J
X
Head Square (ME3)*
Cap Square (ME4)*
Head Trunnion (MT1)
Cap Trunnion (MT2)
Special
1
4
2
3
ACT-2-18
4
U
X
Port and Cushion
Needle Positions
5/8" Rod, CC = 7/16 - 20 (NFPA)
3†
A
Standard position
Ports
Position
1†
Standard
A
Oversized*
E
Special
†
Standard position
*NFPA
Mounting Options
01 Basic (MX0)
02 Bottom Tap (MS4)
*8" Bores Only
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1
A
1
3
5
6
X
www.norgren.com
Series SS Actuators
EE NPT (2)
∅ B Bushing
Y
P + Stroke
∅ MM
KK
Thds.
∅ TD
(Typ.)
A
D
Across Flats
RE
KK Thds.
D
Across
Flats
J
K
LB + Stroke
VF
ZB + Stroke
E Sq.
Standard &
Optional Rod Ends
G
C
TL
(Typ.)
XG
UT
∅B
∅B
∅B
CC
Thds.
∅B
XX
Thds.
FF
Thds.
XX
Thds.
∅B
A Deep
A
C
VF
A
(Small Male)
C
VF
Style #1
A
A
C
C
VF
Style #2
(Optional Male)
C
VF
VF
Style #3
Style #4
(Small Female)
Style #5
(Optional Studded)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50)
31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
ø Rod Std.
(MM) O.S.
Std.
A
O.S.
Std.
B
O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
Std.
EE
O.S.
Std.
FF
O.S.
G
J
K
Std.
KK
O.S.
LB
P
RE
TD
TL
UT
Std.
VF
O.S.
Std.
XG
O.S.
Std.
XX
O.S.
Std.
Y
O.S.
Std.
ZB
O.S.
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.125
(28.58)
1.500
(38.10)
.375
(9.53)
.500
(12.70)
7/16 – 20
7/8 –14
.500
(12.70)
.812
(20.62)
2.000
(50.80)
.250
(6.35)
.375
(9.53)
5/8 –18
1 –14
1.500
(38.10)
1.000
(25.40)
.469
(11.91)
1/2 – 20
3/4 – 16
3.625
(92.08)
2.125
(53.98)
1.430
(36.32)
1.000
(25.40)
1.000
(25.40)
4.000 (101.60)
.625
(15.88)
.875
(22.23)
1.750
(44.45)
2.125
(53.98)
7/16 – 20
3/4 – 16
2.000
(50.80)
2.375
(60.33)
5.094 (129.39)
5.469 (138.91)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.125
(28.58)
1.500
(38.10)
.375
(9.53)
.500
(12.70)
7/16 – 20
7/8 –14
.500
(12.70)
.812
(20.62)
2.500
(63.50)
.250
(6.35)
.375
(9.53)
5/8 –18
1 –14
1.500
(38.10)
1.000
(25.40)
.531
(13.49)
1/2 – 20
3/4 – 16
3.625
(92.08)
2.125
(53.98)
1.840
(46.74)
1.000
(25.40)
1.000
(25.40)
4.500 (114.30)
.625
(15.88)
.875
(22.23)
1.750
(44.45)
2.125
(53.98)
7/16 – 20
3/4 – 16
2.000
(50.80)
2.375
(60.33)
5.156 (130.96)
5.531 (140.49)
.5/8"
(15.88)
.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.125
(28.58)
1.500
(38.10)
.375
(9.53)
.500
(12.70)
7/16 – 20
7/8 –14
.500
(12.70)
.812
(20.62)
3.000
(76.20)
.250
(6.35)
.375
(9.53)
5/8 –18
1 –14
1.500
(38.10)
1.000
(25.40)
.531
(13.49)
1/2 – 20
3/4 – 16
3.750
(95.25)
2.250
(57.15)
2.190
(55.63)
1.000
(25.40)
1.000
(25.40)
5.000 (127.00)
.625
(15.88)
.875
(22.23)
1.750
(44.45)
2.125
(53.98)
7/16 – 20
3/4 – 16
2.000
(50.80)
2.375
(60.33)
5.281 (134.14)
5.656 (143.66)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.500
(38.10)
2.000
(50.80)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.812
(20.62)
1.125
(28.58)
3.750
(95.25)
.375
(9.53)
.500
(12.70)
1 –14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.625
(15.88)
3/4 – 16
1 – 14
4.250 (107.95)
2.625
(66.68)
2.760
(70.10)
1.000
(25.40)
1.000
(25.40)
5.750 (146.05)
.875
(22.23)
1.000
(25.40)
2.250
(57.15)
2.500
(63.50)
3/4 – 16
1 – 14
2.437
(61.90)
2.687
(68.25)
6.250 (158.75)
6.500 (165.10)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.500
(38.10)
2.000
(50.80)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.812
(20.62)
1.125
(28.58)
4.500 (114.30)
.375
(9.53)
.500
(12.70)
1 –14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.625
(15.88)
3/4 – 16
1 – 14
4.250 (107.95)
2.625
(66.68)
3.320
(84.33)
1.000
(25.40)
1.000
(25.40)
6.500 (165.10)
.875
(22.23)
1.000
(25.40)
2.250
(57.15)
2.500
(63.50)
3/4 – 16
1 – 14
2.437
(61.90)
2.687
(68.25)
6.250 (158.75)
6.500 (165.10)
.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.500
(38.10)
2.000
(50.80)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.812
(20.62)
1.125
(28.58)
5.500 (139.70)
.375
(9.53)
.500
(12.70)
1 –14
13/8 – 12
1.750
(44.45)
1.500
(38.10)
.830
(21.08)
3/4 – 16
1 – 14
4.500 (114.30)
2.875
(73.03)
4.100 (104.14)
1.000
(25.40)
1.000
(25.40)
7.500 (190.50)
.875
(22.23)
1.000
(25.40)
2.250
(57.15)
2.500
(63.50)
3/4 – 16
1 – 14
2.437
(61.90)
2.687
(68.25)
6.705 (170.31)
6.955 (176.66)
1.3/8"
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
2.000
(50.80)
2.375
(60.33)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
6.500 (165.10)
.500
(12.70)
.750
(19.05)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.500
(38.10)
.830
(21.08)
1 – 14
11/4 – 12
5.000 (127.00)
3.000
(76.20)
4.880 (123.95)
1.375
(34.93)
1.375
(34.93)
9.250 (234.95)
1.000
(22.23)
1.125
(28.58)
2.625
(66.68)
2.875
(73.03)
1 – 14
11/4 – 12
2.875
(73.03)
3.125
(79.38)
7.455 (189.36)
7.705 (195.71)
1.3/8"
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
2.000
(50.80)
2.375
(60.33)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
8.500 (215.90)
.500
(12.70)
.750
(19.05)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.500
(38.1)
1.000
(25.40)
1 – 14
11/4 – 12
5.125 (130.18)
3.125
(79.38)
6.435 (163.45)
1.375
(34.93)
1.375
(34.93)
11.250 (285.75)
1.000
(22.23)
1.125
(28.58)
2.625
(66.68)
2.875
(73.03)
1 – 14
11/4 – 12
2.875
(73.03)
3.125
(79.38)
7.750 (196.85)
8.000 (203.20)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-19
Series SS Actuators
Actuator with 16 (MT2) Cap Trunnion
● NFPA (MT2) 16 Cap Trunnion Mount
■ ■ ■ ■ ■
1
S
D
2
3
4
5
–
■ 1 6
6
7
–
8
■ ■ ■ ■ ■
9
10 11 12 13
Series SS
Series D
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"
8"
No Options
00
Magnetic
Piston Only**
90
Special∆
98
**See ACT-2-34/35.
∆
Single Rod End
C
D
E
F
G
L
J
M
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
xx
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
99" Stroke
Special
1
A
1
3
5
6
X
2
3†
4
D
J
P
E
N/A
N/A
A
B
G
N
C
N/A
N/A
U
X
†
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Rod Size & Style
Standard
A Male KK
B Male CC*
C Full Dia. Thd.
D Female XX
E Studded
X Special
Standard position
Ports
Position
1†
Standard
A
Oversized*
E
Special
†
Standard position
*NFPA
Mounting Options
01 Basic (MX0)
02 Bottom Tap (MS4)
*8" Bores Only
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Oversized
H Male KK
J
Male CC
K
Full Dia. Thd.
M Female XX
N Studded
2
B
G
3
C
H
X
10
11
15
16
XX
Head Square (ME3)*
Cap Square (ME4)*
Head Trunnion (MT1)
Cap Trunnion (MT2)
Special
Port and Cushion
Needle Positions
(As viewed from
rod end)
5/8" Rod, CC = 7/16 - 20 (NFPA)
1
4
Brookville, OH USA
Phone 937-833-4033
2
3
ACT-2-20
4
D
J
www.norgren.com
Series SS Actuators
EE NPT (2)
∅ B Bushing
Y
P + Stroke
∅ MM
KK
Thds.
∅ TD
(Typ.)
A
D
Across Flats
RE
Standard &
Optional Rod Ends
KK Thds.
UT
∅B
ø Rod Std.
(MM) O.S.
Std.
A
O.S.
Std.
B
O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
Std.
EE
O.S.
Std.
FF
O.S.
G
J
K
Std.
KK
O.S.
LB
P
RE
TD
TL
UT
Std.
VF
O.S.
Std.
XJ
O.S.
Std.
XX
O.S.
Std.
Y
O.S.
Std.
ZB
O.S.
∅B
∅B
XX
Thds.
FF
Thds.
XX
Thds.
∅B
A Deep
A
A
A
C
C
VF
Style #1
Dimension
ZB + Stroke
XJ + Stroke
CC
Thds.
(Small Male)
K
J
LB + Stroke
VF
E Sq.
∅B
A
D A
Across C C
Flats
VF
G
C
TL
(Typ.)
C
VF
Style #2
(Optional Male)
C
VF
VF
Style #3
Style #4
(Small Female)
Style #5
(Optional Studded)
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50)
31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
1.5/8"
(15.88)
1.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.125
(28.58)
1.500
(38.10)
.375
(9.53)
.500
(12.70)
7/16 – 20
7/8 –14
.500
(12.70)
.812
(20.62)
2.000
(50.80)
.250
(6.35)
.375
(9.53)
5/8 –18
1 –14
1.500
(38.10)
1.000
(25.40)
.469
(11.91)
1/2 – 20
3/4 – 16
3.625
(92.08)
2.125
(53.98)
1.430
(36.32)
1.000
(25.40)
1.000
(25.40)
4.000 (101.60)
.625
(15.88)
.875
(22.23)
4.125 (104.78)
4.500 (114.30)
7/16 – 20
3/4 – 16
2.000
(50.80)
2.375
(60.33)
5.094 (129.39)
5.469 (138.91)
1.5/8"
(15.88)
1.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.125
(28.58)
1.500
(38.10)
.375
(9.53)
.500
(12.70)
7/16 – 20
7/8 –14
.500
(12.70)
.812
(20.62)
2.500
(63.50)
.250
(6.35)
.375
(9.53)
5/8 –18
1 –14
1.500
(38.10)
1.000
(25.40)
.531
(13.49)
1/2 – 20
3/4 – 16
3.625
(92.08)
2.125
(53.98)
1.840
(46.74)
1.000
(25.40)
1.000
(25.40)
4.500 (114.30)
.625
(15.88)
.875
(22.23)
4.125 (104.78)
4.500 (114.30)
7/16 – 20
3/4 – 16
2.000
(50.80)
2.375
(60.33)
5.156 (130.96)
5.531 (140.49)
1.5/8"
(15.88)
1.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.125
(28.58)
1.500
(38.10)
.375
(9.53)
.500
(12.70)
7/16 – 20
7/8 –14
.500
(12.70)
.812
(20.62)
3.000
(76.20)
.250
(6.35)
.375
(9.53)
5/8 –18
1 –14
1.500
(38.10)
1.000
(25.40)
.531
(13.49)
1/2 – 20
3/4 – 16
3.750
(95.25)
2.250
(57.15)
2.190
(55.63)
1.000
(25.40)
1.000
(25.40)
5.000 (127.00)
.625
(15.88)
.875
(22.23)
4.250 (107.95)
4.625 (117.48)
7/16 – 20
3/4 – 16
2.000
(50.80)
2.375
(60.33)
5.281 (134.14)
5.656 (143.66)
1.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.500
(38.10)
2.000
(50.80)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.812
(20.62)
1.125
(28.58)
3.750
(95.25)
.375
(9.53)
.500
(12.70)
1 –14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.625
(15.88)
3/4 – 16
1 – 14
4.250 (107.95)
2.625
(66.68)
2.760
(70.10)
1.000
(25.40)
1.000
(25.40)
5.750 (146.05)
.875
(22.23)
1.000
(25.40)
5.000 (127.00)
5.250 (133.35)
3/4 – 16
1 – 14
2.437
(61.90)
2.687
(68.25)
6.250 (158.75)
6.500 (165.10)
1.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.500
(38.10)
2.000
(50.80)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.812
(20.62)
1.125
(28.58)
4.500 (114.30)
.375
(9.53)
.500
(12.70)
1 –14
13/8 – 12
1.750
(44.45)
1.250
(31.75)
.625
(15.88)
3/4 – 16
1 – 14
4.250 (107.95)
2.625
(66.68)
3.320
(84.33)
1.000
(25.40)
1.000
(25.40)
6.500 (165.10)
.875
(22.23)
1.000
(25.40)
5.000 (127.00)
5.250 (133.35)
3/4 – 16
1 – 14
2.437
(61.90)
2.687
(68.25)
6.250 (158.75)
6.500 (165.10)
1.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.500
(38.10)
2.000
(50.80)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.812
(20.62)
1.125
(28.58)
5.500 (139.70)
.375
(9.53)
.500
(12.70)
1 –14
13/8 – 12
1.750
(44.45)
1.500
(38.10)
.830
(21.08)
3/4 – 16
1 – 14
4.500 (114.30)
2.875
(73.03)
4.100 (104.14)
1.000
(25.40)
1.000
(25.40)
7.500 (190.50)
.875
(22.23)
1.000
(25.40)
5.250 (133.35)
5.500 (139.70)
3/4 – 16
1 – 14
2.437
(61.90)
2.687
(68.25)
6.705 (170.31)
6.955 (176.66)
1.3/8"
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
2.000
(50.80)
2.375
(60.33)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
6.500 (165.10)
.500
(12.70)
.750
(19.05)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.500
(38.10)
.830
(21.08)
1 – 14
11/4 – 12
5.000 (127.00)
3.000
(76.20)
4.880 (123.95)
1.375
(34.93)
1.375
(34.93)
9.250 (234.95)
1.000
(22.23)
1.125
(28.58)
5.875 (149.23)
6.125 (155.58)
1 – 14
11/4 – 12
2.875
(73.03)
3.125
(79.38)
7.455 (189.36)
7.705 (195.71)
1.3/8"
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
2.000
(50.80)
2.375
(60.33)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
8.500 (215.90)
.500
(12.70)
.750
(19.05)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.500
(38.1)
1.000
(25.40)
1 – 14
11/4 – 12
5.125 (130.18)
3.125
(79.38)
6.435 (163.45)
1.375
(34.93)
1.375
(34.93)
11.250 (285.75)
1.000
(22.23)
1.125
(28.58)
6.000 (152.40)
6.250 (158.75)
1 – 14
11/4 – 12
2.875
(73.03)
3.125
(79.38)
7.750 (196.85)
8.000 (203.20)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-21
Series SS Actuators
Double Rod End Cylinder with 01
(MX0) Basic
● NFPA (MX0) 01 Basic Double Rod End Cylinder
available in 1-1/2" thru 8" bore size.
■ ■ ■ ■ ■
1
S
D
2
3
4
–
■ 0 1
5
6
7
–
8
■ ■ ■ ■ ■
9
10 11 12 13
Series SS
Series D
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"
8"
No Options
00
Magnetic
Piston Only**
90
Special∆
98
**See ACT-2-34/35.
∆
Double Rod End
Q
R
S
T
U
Y
W
Z
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
xx
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
99" Stroke
Special
1
A
1
3
5
6
X
2†
3
4
D
J
P
E
K
R
A
B
G
N
C
H
M
U
X
†
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Rod Size & Style
Standard
A Male KK
B Male CC*
C Full Dia.Thd.
D Female XX
E Studded
X Special
Standard position
Ports
Position
1†
2
3
4
Standard
A
B
C
D
Oversized*
E
G
H
J
Special
X
†
Standard position
*NFPA
Mounting Options
01 Basic (MX0)
10 Head Square (ME3)*
02 Bottom Tap (MS4)
15 Head Trunnion (MT1)
XX Special
*8" Bores Only
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Oversized
H Male KK
J Male CC
K Full Dia. Thd.
M Female XX
N Studded
Port and Cushion
Needle Positions
(As viewed from
rod end)
5/8" Rod, CC = 7/16 - 20 (NFPA)
1
4
3
ACT-2-22
Brookville, OH USA
Phone 937-833-4033
2
www.norgren.com
Series SS Actuators
EE NPT (2)
∅ B Bushing
Y
P + Stroke
Y + Stroke
∅ MM
∅ B Bushing
KK
Thds.
∅ MM
KK
Thds.
C + Stroke
A
D
Across Flats
G
C
RE
G
K
LD + Stroke
VF
A
VF
ZM + (2 x Stroke)
E Sq.
Standard &
Optional Rod Ends
∅B
∅B
KK Thds.
∅B
CC
Thds.
D
Across
Flats
∅B
XX
Thds.
FF
Thds.
XX
Thds.
∅B
A Deep
A
A
C
VF
C
VF
Style #1
(Small Male)
A
A
C
C
VF
Style #2
(Optional Male)
C
VF
VF
Style #3
Style #4
(Small Female)
Style #5
(Optional Studded)
Dimension
11/2" Bore (38.10)
2" Bore (50.80)
21/2" Bore (63.50)
31/4" Bore (82.55)
4" Bore (101.60)
5" Bore (127.00)
6" Bore (152.40)
8" Bore (203.20)
ø Rod Std.
(mm) O.S.
Std.
A
O.S.
Std.
B
O.S.
Std.
C
O.S.
Std.
CC
O.S.
Std.
D
O.S.
E
Std.
EE
O.S.
Std.
FF
O.S.
G
K
Std.
KK
O.S.
LD
P
RE
Std.
VF
O.S.
Std.
XX
O.S.
Std.
Y
O.S.
Std.
ZM
O.S.
.5/8"
(15.88)
1.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.125
(28.58)
1.500
(38.10)
.375
(9.53)
.500
(12.70)
7/16 – 20
7/8 –14
.500
(12.70)
.812
(20.62)
2.000
(50.80)
.250
(6.35)
.375
(9.53)
5/8 –18
1 –14
1.500
(38.10)
.469
(11.91)
1/2 – 20
3/4 – 16
4.125 (104.78)
2.125
(53.98)
1.430
(36.32)
.625
(15.88)
.875
(22.23)
7/16 – 20
3/4 – 16
2.000
(50.80)
2.375
(60.33)
6.125 (155.58)
6.875 (174.63)
.5/8"
(15.88)
1.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.125
(28.58)
1.500
(38.10)
.375
(9.53)
.500
(12.70)
7/16 – 20
7/8 –14
.500
(12.70)
.812
(20.62)
2.500
(63.50)
.250
(6.35)
.375
(9.53)
5/8 –18
1 –14
1.500
(38.10)
.531
(13.49)
1/2 – 20
3/4 – 16
4.125 (104.78)
2.125
(53.98)
1.840
(46.74)
.625
(15.88)
.875
(22.23)
7/16 – 20
3/4 – 16
2.000
(50.80)
2.375
(60.33)
6.125 (155.58)
6.875 (174.63)
.5/8"
(15.88)
1.1"
(25.40)
.750
(19.05)
1.125
(28.58)
1.125
(28.58)
1.500
(38.10)
.375
(9.53)
.500
(12.70)
7/16 – 20
7/8 –14
.500
(12.70)
.812
(20.62)
3.000
(76.20)
.250
(6.35)
.375
(9.53)
5/8 –18
1 –14
1.500
(38.10)
.531
(13.49)
1/2 – 20
3/4 – 16
4.250 (107.95)
2.250
(57.15)
2.190
(55.63)
.625
(15.88)
.875
(22.23)
7/16 – 20
3/4 – 16
2.000
(50.80)
2.375
(60.33)
6.250 (158.75)
7.000 (177.80)
1.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.500
(38.10)
2.000
(50.80)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.812
(20.62)
1.125
(28.58)
3.750
(95.25)
.375
(9.53)
.500
(12.70)
1 –14
13/8 – 12
1.750
(44.45)
.625
(15.88)
3/4 – 16
1 – 14
4.750 (120.65)
2.625
(66.68)
2.760
(70.10)
.875
(22.23)
1.000
(25.40)
3/4 – 16
1 – 14
2.437
(61.90)
2.687
(68.25)
7.500 (190.50)
8.000 (203.20)
1.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.500
(38.10)
2.000
(50.80)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.812
(20.62)
1.125
(28.58)
4.500 (114.30)
.375
(9.53)
.500
(12.70)
1 –14
13/8 – 12
1.750
(44.45)
.625
(15.88)
3/4 – 16
1 – 14
4.750 (120.65)
2.625
(66.68)
3.320
(84.33)
.875
(22.23)
1.000
(25.40)
3/4 – 16
1 – 14
2.437
(61.90)
2.687
(68.25)
7.500 (190.50)
8.000 (203.20)
1.1"
(25.40)
1.3/8"
(34.93)
1.125
(28.58)
1.625
(41.28)
1.500
(38.10)
2.000
(50.80)
.500
(12.70)
.625
(15.88)
7/8 –14
11/4 – 12
.812
(20.62)
1.125
(28.58)
5.500 (139.70)
.375
(9.53)
.500
(12.70)
1 –14
13/8 – 12
1.750
(44.45)
.830
(21.08)
3/4 – 16
1 – 14
5.000 (127.00)
2.875
(73.03)
4.100 (104.14)
.875
(22.23)
1.000
(25.40)
3/4 – 16
1 – 14
2.437
(61.90)
2.687
(68.25)
7.750 (196.85)
8.250 (209.55)
1.3/8"
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
2.000
(50.80)
2.375
(60.33)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
6.500 (165.10)
.500
(12.70)
.750
(19.05)
13/8 – 12
13/4 – 12
2.000
(50.80)
.830
(21.08)
1 – 14
11/4 – 12
5.500 (139.70)
3.000
(76.20)
4.880 (123.95)
1.000
(22.23)
1.125
(28.58)
1 – 14
11/4 – 12
2.875
(73.03)
3.125
(79.38)
8.750 (222.25)
9.250 (234.95)
1.3/8"
(34.93)
1.3/4"
(44.45)
1.625
(41.28)
2.000
(50.80)
2.000
(50.80)
2.375
(60.33)
.625
(15.88)
.750
(19.05)
11/4 – 12
11/2 – 12
1.125
(28.58)
1.500
(38.10)
8.500 (215.90)
.500
(12.70)
.750
(19.05)
13/8 – 12
13/4 – 12
2.000
(50.80)
1.000
(25.40)
1 – 14
11/4– 12
5.500 (139.70)
3.125
(79.38)
6.435 (163.45)
1.000
(22.23)
1.125
(28.58)
1 – 14
11/4 – 12
2.875
(73.03)
3.125
(79.38)
8.750 (222.25)
9.250 (234.95)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-23
Series SS Actuators
Rod Clevis Dimensions
Rod Clevis 303 Stainless Steel
CW
CB
CW
CB
CD
CE
CH
CW
ER
KK
L
ER Radius
Ø CD
L
CE
KK Thds.
S-92-03
.750 (19.05)
.500
(12.70)
1.500 (38.10)
1.000 (25.40)
.500 (12.70)
.500 (12.70)
1/2-20
.750 (19.05)
S-92-12
1.500 (38.10)
1.000
(25.40)
3.125 (79.38)
1.500 (38.10)
.750 (19.05)
1.000 (25.40)
1-14
1.500 (38.10)
S-92-16
2.000 (50.80)
1.375
(34.93)
4.125 (104.78)
2.000 (50.80)
1.000 (25.40)
1.375
(34.93)
11/4 - 12
2.125 (53.98)
CH Across
Hex Flats
Eye Bracket 304 Stainless Steel
LR Radius
NFPA Eye Bracket Dimensions
Ø DD
4 Places
BA
CB
CD
DD
E
F
FL
LR
M
Ø CD
M Radius
E BA
F
S-92-065
1.250 (31.75)
.750
(19.05)
2.375 (60.33)
1.250 (31.75)
.625 (15.88)
.750 (19.05)
3/4-16
1.250 (31.75)
CB
FL
BA
S-89-03A
1.625 (41.28)
.750 (19.05)
.500 (12.70)
.406 (10.31)
2.500 (63.50)
(9.53)
.375
1.125 (28.58)
.750 (19.05)
.500 (12.70)
S-89-065A
2.562 (65.07)
(31.75)
1.250
.750 (19.05)
.531 (13.49)
3.500 (88.90)
.625 (15.88)
(47.63)
1.875
1.250 (31.75)
(19.05)
.750
S-89-12A
3.250 (82.55)
(38.10)
1.500
1.000 (25.40)
.656 (16.66)
4.500 (114.30)
.750 (19.05)
2.250 (57.15)
1.500 (38.10)
(25.40)
1.000
S-96-12A
1.000 (25.40)
3.750 (95.25)
3.250 (82.55)
S-96-16A
1.375 (34.93)
5.625 (144.88)
4.375 (111.13)
E
NFPA Pin 303 Stainless Steel
NFPA Pin Dimensions
Ø CD
CD
LH
LP
LP
LH
;;
;;
;;
;;
;;;
;;
;;;
;;;
;;;
;;
;;
.062
radial float
2° spherical
motion
A Thds.
ØB
H
Across
Flats
E
E
D
S-96-065A
.750 (19.05)
3.125 (79.38)
2.750 (69.85)
NFPA Rod Alignment Coupler Dimensions
Ø F Shank
G Across Flats
A Thds.
S-96-03A
.500 (12.70)
2.219 (56.36)
1.875 (47.63)
C
A
B
C
D
E
F
G
H
Maximum Pull (lbs)
SC-107
7/16-20
1.250(31.75)
2.000(50.80)
.500(12.70)
.750 (19.05)
.625(15.88)
.563(12.70)
1.125(28.58)
2.250
SC-1-08
1/2 – 20
1.250(31.75)
2.000(50.80)
.500(12.70)
.750 (19.05)
.625(15.88)
.563(12.70)
1.125(28.58)
3.150
SC-1-12
3/4 – 16
1.750(44.45)
2.31258.72)
.500(12.70)
1.125(25.58)
.969(24.61)
.812(20.62)
1.500(38.10)
7.750
SC-1-16
1-14
2.500(63.50)
2.937(74.60)
.500(12.70)
1.625(41.28)
1.375(34.93)
1.156(29.36)
2.250(57.15)
12.250
Made of 303 Stainless Steel, the Rod Alignment Coupler allows 1/16" of radial float and 2° of spherical movement.
This prevents cylinder binding due to misalignment thus extending bearing and seal life, and permits greater tolerance
between the center line of the cylinder and mating part for simplified installation.
ACT-2-24
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series SS Actuators
Optional Features
;;;;
;;;;
;;;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;;;;;;;;;;;;;;;;;;;;;;;;
;
;;;;;;;;;;;;
Aggressively scrapes foreign materials
from the exposed portion of the piston
rod during retract, thereby protecting
the rod seal.
TO ORDER: enter 5 in position 11 of
the model number.
;;
;;;
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;;
;;
;;;;;;;;;;
;;
;;;
;;;
;;;
Stop Tube
Provides increased stability to long
stroke cylinders.
TO ORDER: Indicate full working
stroke in positions 3, 4 & 5 of the
model number. Enter 98 in positions
12 & 13 of the model number and
specify: 98 = _____inches of
stop tube.
;;
;;;;;;;;;
;;
;;
;;
;;
303 Stainless Steel Piston
When internal corrosion is a concern,
specify the 303 Stainless Steel
Piston.
;;
;;
;
;
;;
Air/Oil Piston Seal
Prevents leakage past the seal in
air/oil applications. This added
protection is accomplished by using
one loaded lip-type piston seal.
TO ORDER: enter 3 in position 11 of
the model number.
Optional features should be specified at the time of cylinder order. Enter 98 in positions 12 & 13 of the model number and specify: Example 98 = 303 stainless steel piston.
Custom Cylinders
●
●
●
●
●
●
●
Air-to-Air Booster/Pump
Multi-Position Duplex
Force Multiplication Tandem
Protective Rod Boot
Extra long cushions.
Extremely low breakaway.
High temperature.
Stop tube.
Spring extend/retract.
Non-rotating rod.
Oversized piston rods.
Multi-Position Back-to-Back
Norgren designs and manufactures literally hundreds of specialty cylinders. We welcome the opportunity to provide you with a customized cylinder that
meets the specific requirements of your application. For more information on how to order custom cylinders consult factory.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-25
Series SS Actuators
Cylinder Order Information for 1-1/2" to 8"
S C 0 4 J
1
S
D
2
3
4
–
5
A 0 1
6
7
8
–
A A 6 0 0
9
10 11 12 13
Series SS
Series D
Single Rod End
C
D
E
F
G
L
J
M
Bore
11/2"
2"
21/2"
31/4"
4"
5"
6"
8"
No Options
Magnetic
Piston Only**
Special∆
Double Rod End
Q
R
S
T
U
Y
W
Z
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
99" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Rod Size & Style
Standard
A Male KK
B Male CC*
C Full Dia. Thd.
D Female XX
E Studded
X Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
†
1
Oversized
H Male KK
J Male CC
K Full Dia. Thd.
M Female XX
N Studded
B
G
N
3
C
H
Brookville, OH USA
4
10
11
15
16
XX
D
J
P
E
K
R
4
D
J
Head Square (ME3)*
Cap Square (ME4)*
Head Trunnion (MT1)
Cap Trunnion (MT2)
Special
2
3
Phone 937-833-4033
4
X
1
C
H
M
2
B
G
Port and Cushion Needle Positions
(As viewed from rod end)
Reed & Hall Effect Switches
Available on all bore sizes – order separately. See ACT-2-34/35
for specifications.
3
U
X
*8" Bores only
IMPORTANT: When using X, XX, or 98 in a model number, please be specific!
X = (Description).
2†
Standard position
Mounting Options
01 Basic (MX0)
02 Bottom Tap (MS4)
EXAMPLE: Series SS – 11/2" bore – 41/2" stroke – standard rod end – MX0 Basic
mount – standard ports at position #1 – no cushions – Soft Touch Bumper Seal –
no options.
A
1
3
5
6
X
A
Ports
Position
1†
Standard
A
Oversized*
E
Special
†
Standard position
*NFPA
5/8" Rod, CC = 7/16 - 20 (NFPA)
ACT-2-26
90
98
**See ACT-2-34/35.
∆
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
XX
00
www.norgren.com
Series SS Actuators
Superior operating performance in a 1-1/8" bore size!
provides positive wiping action and low
friction. Lip-type nitrile seal is pressure
energized and wear compensating for
long life.
seals are pressure energized and wear
compensating. Their excellent lubrication
retention characteristics lower seal friction
and ensure long life.
1
5 Bearing Seal: Teflon® rod wiper
1 Piston Seals: Lip-type nitrile
3 Head/Cap: Precision machined
from solid corrosion-resistant 304
stainless steel bar.
4 Piston Rods: 303 stainless steel,
40,000 PSI minimum yield, hard chrome
plated, ground and polished.
1
3
5
2
3
7
6
8
4
9
10
8 Tie Rods: High-strength 303
stainless steel maintains compression
on tube and seals.
9 Rod Bearing: Incorporates a sintered
bronze rod bearing which is pressed into the
cylinder head.
7 Tube: Corrosion-resistant 304
stainless steel.
10 Acorn Nut: Tie rod threads are
covered by stainless steel acorn nuts
which eliminate another bacteria
hiding place.
Optional Features
Norgren’s state-of-the-art Ultra Cushion® design
and Soft Touch Bumper Seal are also available
on our 11/8" bore. (See ACT-2-3.)
Cushions permit the trapping of cylinder exhaust
volume prior to the completion of full rod
extension or retraction. This volume is then
metered through a finely tapered needle to deliver
smooth, adjustable deceleration of the
cylinder load.
#10 - 40 Thread
.173
.062
1.094
.500
.480
.480
Note: Cushion block increases stroke related
dimensions by .500 per end.
.500
.844
Cushions are not available on 11/8" bore with
1/2" diameter rod.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-2-27
Series SS Actuators
Cylinder
Cylinder
Cylinder
Cylinder
with
with
with
with
01
03
04
05
(MX0) Basic
(MS8) Bolt Thru
(MF7) Front Flange
(MF2) Rear Flange
1-1/8" Cylinder with
01 (MX0) Basic
EE NPT (2)
P + Stroke
Y
∅ MM
CC
Thds.
A
C
D
(Flats)
∅ RM
ESq.
03 (MS8) Bolt Thru
J
G
∅ DB Hole Thru
∅ TB C'Bore for
SB Screws
3 Places
K
LB + Stroke
ZB + Stroke
V
SD + Stroke
XB
H
.375 (9.53)
∅ MM
CC
Thds.
DN
A
C
D
(Flats)
∅ RM
ESq.
04 (MF7) Front Flange
G
J
LB + Stroke
ZB + Stroke
V
K
EE
NPT (2)
FB Holes (4)
Y
P + Stroke
∅ MM
CC
Thds.
E
R
A
W
D
(Flats)
TF
UF
05 (MF2) Rear Flange
Y
G
J
FB Holes (4)
P + Stroke
K
LB + Stroke
ZB + Stroke
FH
EE
NPT (2)
∅ MM
CC
Thds.
R
E
A
C
V
G
J
LB + Stroke
ZF + Stroke
FH
ACT-2-28
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
TF
UF
Series SS Actuators
Standard
& Optional Rod Ends
CC Thds.
KK Thds.
XX Thds.
A Deep
D
Across
Flats
A
C
A
V
Style #1
ø Rod
A
Std.
O.S.
Std.
O.S.
C
CC
D
Std.
O.S.
Std.
O.S.
DB
DN
E
EE
FB
FH
G
H
J
K
KK
Style #2
SB
Y
ZB
ZF
Cylinder with 03 (MS8) Bolt Thru
.3/8"
.1/2"
.625
.750
.250
(7.92)
(11.10)
(38.10)
(3.18)
.875
Std.
O.S.
Std.
O.S.
(22.23)
(15.88)
(10.16)
.312
.437
.203
1.000
1.500
.125
.750
1.000
(57.15)
(9.40)
(12.57)
(34.93)
2.250
.370
.495
(19.05)
(25.40)
.750
1.000
–
–
–
–
–
–
.125
(57.15)
(9.40)
(12.57)
–
–
.312
.437
1.500
.125
.219
.250
.875
2.250
.370
.495
1.375
1.000
(3.18)
–
(15.88)
1/4 - 28
3/8 - 24
–
2.625
(66.68)
1.500
.125
.219
.250
.875
(15.88)
(10.16)
.625
(57.15)
(9.40)
(12.57)
(34.93)
(25.40)
2.250
.370
.495
1.375
1.000
.938
2.625
–
Phone 937-833-4033
(38.10)
(3.18)
(5.56)
(6.35)
(22.23)
–
(15.88)
–
5/16 - 24
7/16 - 20
(57.15)
(9.40)
(12.57)
(34.93)
(25.40)
–
–
–
–
–
–
(50.80)
(63.50)
(3.18)
(3.18)
2.000
2.500
.125
(23.82)
(66.68)
.938
(50.80)
(63.50)
(3.18)
–
–
1/4 - 28
3/8 - 24
–
1/4 - 28
3/8 - 24
–
Brookville, OH USA
(38.10)
(3.18)
(5.56)
(6.35)
(22.23)
–
–
–
–
–
–
2.000
2.500
.125
.125
(7.92)
(11.10)
–
–
–
.625
.400
(9.53)
(12.70)
(15.88)
(19.05)
(6.35)
.312
.437
–
–
(44.45)
(8.33)
.625
.3/8"
.1/2"
.625
.750
.250
3/8 - 24
1/2 - 20
(7.92)
(11.10)
(19.05)
(25.40)
.125
Cylinder with 05 (MF2) Rear Flange
5/16 - 24
7/16 - 20
–
–
(23.82)
(66.68)
–
(22.23)
(15.88)
(15.88)
(10.16)
1.750
.328
(3.18)
.938
2.625
(9.53)
(12.70)
(15.88)
(19.05)
(6.35)
#10
#10
–
–
1/4 - 28
3/8 - 24
Std.
O.S.
.3/8"
.1/2"
.625
.750
.250
5/16 - 24
7/16 - 20
–
Std.
O.S.
Std.
O.S.
(7.92)
(11.10)
(5.16)
(25.40)
(38.10)
(3.18)
.875
.625
.625
.400
5/16 - 24
7/16 - 20
2.250
.370
.495
1.375
Cylinder with 04 (MF7) Front Flange
3/8 - 24
1/2 - 20
–
–
–
.625
.400
(9.53)
(12.70)
(15.88)
(19.05)
(6.35)
(Optional Female)
3/8 - 24
1/2 - 20
–
–
SD
TB
TF
UF
V
W
XB
XX
.312
.437
Style #3
(Optional Male)
3/8 - 24
1/2 - 20
1.500
.125
P
R
RM
(9.53)
(12.70)
(15.88)
(19.05)
(6.35)
–
–
LB
MM
Cylinder with 01 (MXO) Basic
.3/8"
.1/2"
.625
.750
.250
V
V
(Standard Male)
Dimension
C
C
(23.82)
–
2.875
www.norgren.com
(73.03)
ACT-2-29
Series SS Actuators
Cylinder with 17 (MP3) Fixed Eye
Cylinder with 22 (MS9) Side Tap
Cylinder with 30 (MR1) Head Face
17 (MP3) Fixed Eye
EE NPT (2)
P + Stroke
Y
∅ MM
CC
Thds.
∅ CD
A
C
22 (MS9) Side Tap
J
G
L
LB + Stroke
XC + Stroke
V
M
CB
ESq.
EE NPT (2)
P + Stroke
Y
∅ MM
CC
Thds.
ESq.
A
C
TN
30 (MR1) Head Face
NT Tap
TK Deep
G
J
K
SN + Stroke
XT
LB + Stroke
ZB + Stroke
V
EE NPT (2)
Y
P + Stroke
∅ MM
CC
Thds.
ESq.
A
D
(Flats)
∅ RM
RE
1-1/8" Double Rod End
C
RT Thds.
on ∅ BC
Bolt Circle
G
J
K
LB + Stroke
V
ZB + Stroke
EE NPT (2)
P + Stroke
Y
∅ MM
CC
Thds.
A
G
G
D
(Flats)
∅ RM
ESq.
K
LB + Stroke
ZB + (2 x Stroke)
ACT-2-30
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
C
V
Series SS Actuators
Standard
& Optional Rod Ends
KK Thds.
CC Thds.
D
Across
Flats
XX Thds.
A Deep
A
A
C
V
Style #2
Cylinder with 17 (MP3) Fixed Eye
.3/8"
.1/2"
.625
.750
Cylinder with 22 (MS9) Side Tap
(9.53)
(12.70)
(15.88)
(19.05)
.3/8"
.1/2"
.625
.750
(6.35)
(9.53)
.250
–
.250
.375
(9.53)
(7.92)
(11.10)
(38.10)
(3.18)
(22.23)
(15.88)
–
5/16 - 24
7/16 - 20
.437
2.250
.375
.370
.495
(11.10)
(57.15)
(9.53)
(9.40)
(12.57)
–
–
–
–
–
–
–
–
1/4 - 28
3/8 - 24
.312
.437
1.500
.125
.875
.625
.400
(7.92)
(11.10)
(38.10)
(3.18)
(22.23)
(15.88)
(10.16)
2.250
(9.53)
(12.70)
(15.88)
(19.05)
(40.46)
(6.35)
.312
.437
1.500
.125
.875
.625
.400
5/16 - 24
7/16 - 20
–
(57.15)
.370
.495
1.375
1.750
.250
1.000
.125
2.250
(9.40)
(12.57)
.370
.495
(34.93)
1.375
1.125
.750
1.000
–
(7.92)
(11.10)
(38.10)
(3.18)
(22.23)
(15.88)
(10.16)
.312
.437
1.500
.125
.875
.625
.400
(57.15)
2.250
(15.88)
(23.83)
(66.68)
(9.40)
(12.57)
.370
.495
(34.93)
(28.58)
(19.05)
(25.40)
1.375
Phone 937-833-4033
(57.15)
(9.40)
(12.57)
–
(34.93)
–
.750
1.000
(19.05)
(25.40)
–
–
–
–
(3.18)
.938
2.625
–
5/16 - 24
7/16 - 20
–
(7.92)
(11.10)
(38.10)
(3.18)
(22.23)
(15.88)
(10.16)
–
.125
–
–
1/4 - 28
3/8 - 24
1/4 - 28
3/8 - 24
(6.35)
–
3/8 - 24
1/2 - 20
–
10 - 32
–
–
–
.125
(9.53)
(12.70)
(15.88)
(19.05)
.250
–
–
Brookville, OH USA
.3/8"
.1/2"
.625
.750
–
(44.45)
(6.35)
(25.40)
(3.18)
.938
2.625
Double Rod End Cylinder with 01 (MX0)
5/16 - 24
7/16 - 20
–
–
.625
(23.83)
–
.3/8"
.1/2"
.625
.750
1.593
.250
–
3/8 - 24
1/2 - 20
–
–
–
–
–
(3.18)
(77.77)
.938
Cylinder with 30 (MR1) Head Face
10 - 32
(34.93)
.125
3.062
(6.35)
(Optional Female)
–
3/8 - 24
1/2 - 20
–
–
1.375
(9.53)
(12.70)
(15.88)
(19.05)
–
3/8 - 24
1/2 - 20
.375
.312
.437
1.500
.125
.875
.625.
Style #3
(Optional Male)
(Standard Male)
Std.
ø Rod
O.S.
Std.
A
O.S.
BC
C
CB
Std.
CC
O.S.
CD
Std.
D
O.S.
E
EE
G
J
K
Std.
KK
O.S.
L
LB
M
Std.
MM
O.S.
NT
P
RE
Std.
RM
O.S.
RT
SN
TK
TN
V
XC
XT
Std.
XX
O.S.
Y
ZB
V
V
Style #1
Dimension
C
C
(3.18)
–
–
1/4 - 28
3/8 - 24
(23.83)
(66.68)
.938
3.250
www.norgren.com
(23.83)
(82.55)
ACT-2-31
Series SS Actuators
Rod Eye Dimensions
Rod Eye 303 Stainless Steel
CB
ER Radius
A
CA
CB
CD
ER
H
KK
N
Ø CD
N
CA
A
KK Thds.
A Deep
HSq.
S-97-225*
.437 (11.10)
(22.23)
.875
(9.53)
.375
(9.53)
.375
(9.53)
.375
.750 (19.05)
3/8-24
(5.56)
.219
S-97-225A*
.437 (11.10)
(22.23)
.875
(9.53)
.375
(9.53)
.375
(9.53)
.375
.750 (19.05)
1/2-20
(7.92)
.312
*Includes Jam Nut
Clevis Bracket 304 Stainless Steel
Ø CD
Clevis Bracket Dimensions
Ø DD
Ø DB C’Bore
TB Deep
4 Places
M Radius
E BA
LR Radius
CB
CW
F
FL
BA
CW
E
BA
CB
CD
CW
DB
DD
E
F
FL
LR
M
TB
S-91-225
1.125 (28.58)
(9.53)
.375
(9.53)
.375
(6.35)
.250
(8.33)
.328
(5.16)
.203
.500 (12.70)
.500 (12.70)
1.125 (28.58)
.625 (15.88)
(9.53)
.375
(7.92)
.312
Pivot Pin Dimensions
Pivot Pin 303 Stainless Steel
Ø CD
CD
LH
LP
LP
LH
S-96-225A**
.375
(9.53)
1.250 (31.75)
1.032 (26.21)
**Use with S-91-225, S-97-225
;;
;;
;;
;;
;;;
;;
;;;
;;;
;;;
A Thds.
;;
;;
.062
radial float
2° spherical
motion
NFPA Rod Alignment Coupler Dimensions
Ø F Shank
G Across Flats
A Thds.
ØB
H
Across
Flats
E
E
D
C
A
B
C
D
E
F
G
H
Maximum Pull (lbs.)
SC-1-06
3/8 – 24
(22.23)
.875
(31.75)
1.250
(6.35)
.250
(15.88)
.625
(9.53)
.375
(7.92)
.312
(19.05)
.750
1,375
Made of 303 Stainless Steel, the Rod Alignment Coupler allows 1/16" of radial float and 2° of spherical movement.
This prevents cylinder binding due to misalignment thus extending bearing and seal life, and permits greater tolerance
between the center line of the cylinder and mating part for simplified installation.
ACT-2-32
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series SS Actuators
Cylinder Order Information for 1-1/8"
S B 0 4 J
1
S
D
2
3
4
–
5
B 0 1
6
7
8
–
A A 6 0 0
9
10 11 12 13
Series SS
Series D
Single Rod End
B
Bore
11/8"
No Options
00
Magnetic
Piston Only**
90
Special∆
98
**See ACT-2-34/35.
∆
Double Rod End
P
Optional Seals
No Option
Viton Seals
Air/Oil Seal
Soft Touch
Special
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
99
XX
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Fixed
Special
99" Stroke
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
2†
3
4
D
J
P
E
K
R
A
B
G
N
C
H
M
U
X
†
Standard position
Note: Cushions are not available on 11/8" bore
with 1/2" diameter rod.
Ports
Position
Standard
Special
†
Rod Size & Style
Standard
A Male KK
B Male CC*
D Female XX
X Special
1
A
1
3
5
6
X
Oversized
H Male KK
J Male CC
M Female XX
2
B
3
C
4
D
X
Standard position
Mounting Options
01 Basic (MX0)
03 Bolt Thru (MS8)
*Standard Rod End 11/8" Bore (3/8 - 24)
1†
A
17
22
30
XX
Fixed Eye (MP3)
Side Tap (MS9)
Head Face (MR1)
Special
Port and Cushion Needle Positions
(As viewed from rod end)
EXAMPLE: Series SS – 11/8" bore – 41/2" stroke – standard rod end – MX0 Basic
mount – standard ports at position #1 – no cushions – Soft Touch Bumper Seal –
no options.
X = (Description).
1
4
Available on all bore sizes – order separately. See ACT-2-34/35
for specifications.
3
Brookville, OH USA
2
Phone 937-833-4033
www.norgren.com
ACT-2-33
Series SS Actuators
Switches for 1-1/8" to 2-1/2"
Cylinders
● Magnetically operated, non-contact
sensing system.
● Consists of a magnet in the piston, and a
sensing switch clamped on the cylinder tie rod.
● One or more switches may be mounted to
provide an indication of piston position.
● Switches are provided with vinyl molded cable.
● Adjustable mounting brackets allow for switches
● Indicator light facilitates installation
and troubleshooting.
● Several switches may be mounted to control
or initiate any sequence function.
● Mounting brackets standard with switches.
Specifications
*Metal Oxide Varsitor Surge Suppression. NOTE: All CS7 and CS8 Series Switches are supplied with 9 foot leads.
Switch Model
CS8-2-04 Reed
CS8-2-31 Hall
CS8-2-32 Hall
Bore Sizes
Switch Type
11/8" thru 21/2"
Hall Effect & Light,
Sourcing PNP
Normally Open
6-24 VDC
11/8" thru 21/2"
Sinking NPN
Normally Open
6-24 VDC
.5 Amp Max
.5 Amp Max
Switching Power
Max Voltage Drop
11/8" thru 21/2"
Reed Switch
*MOV & Light
SPST Normally Open
5-120 VDC/VAC
50/60 Hz
.5 Amp Max
.005 Amp Min
10 VA
3.5 Volts
85 Gauss
12 Watts Max
.5 Volts
85 Gauss
12 Watts Max
.5 Volts
85 Gauss
Temperature Range
-22°F to +176°F
-22°F to +176°F
-22°F to +176°F
Function
Switching Voltage
Switching Current
Wiring Diagrams
BRN
WHT
+
–
Supply
120V Max
+
Supply
6-24 VDC
BRN
0.45
Load
–
WHT
–
WHT
Supply
6-24 VDC
GRN
0.10
Load
+
BRN
GRN
Load
CS8-2 Series
.53
(13.5)
1.26 (32)
.7
(17.7)
.43
(10.8)
1.1 (27.4)
ACT-2-34
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
0.10
Series SS Actuators
Hall Effect/Magnetoresistive Working Principle
The solid state (no moving parts) magnetoresistive sensor
responds to a north or south magnetic pole by providing a digital
signal to the output control circuit. This technique enables the
sensing of weak magnetic fields, with no limit to the maximum
strength of the magnetic field.
(mechanical contacts) which are open in their normal state. When
a magnetic field moves within proximity of the switch, magnetism
is induced into the leads and forces the contacts to close.
Normally Open Reed
N
Normally Open Reed
+
Output
Output
Sensor
N
S
Switch Open
Sensor
V=0
Magnet
+
V<>0
–
S
Supply
Switch Closed
–
Supply
Magnet
1. Always stay within the specifications and power rating limitations of the
unit installed.
Motors will produce high pulses that will be introduced into the control wiring
if the wiring is carried in the same conduit.
3. Never connect the switch without a load present. The switch will be
destroyed.
4. Some electrical loads may be capacitive. Capacitive loading may occur due
to distributed capacity in cable runs over 25 feet. Use switch Model CS7-24
In order to obtain optimum performance and long life, magnetically operated
limit switches should not be subjected to: (1) strong magnetic fields, (2)
extreme temperature, and (3) excessive ferrous filing or chip buildup.
with the listed power ratings, must be carefully observed before connecting
Lower power switches are designed for signaling electronic circuits. Do not use
on relay loads or with incandescent bulbs. Resistive loads only.
CS7-04 Reed
CS7-24 Reed
CS7-31 Hall
CS7-32 Hall
2" thru 8"*
Reed Switch
*MOV & Light
Normally Open
5-240 VDC/VAC
50/60 Hz
1 Amp Max
2" thru 8"*
Reed Switch
Normally Open
24-240 VAC
50/60 Hz
4 Amp Max
50 Amp Inrush
100 Watts Max
N/A
85 Gauss
Parallel
-22°F to +176°F
2" thru 8"*
Sourcing PNP
Normally Open
6-24 VDC
2" thru 8"*
Sinking NPN
Normally Open
6-24 VDC
1 Amp Max
1 Amp Max
24 Watts Max
.5 Volts
85 Gauss
Parallel
-22°F to +176°F
24 Watts Max
.5 Volts
85 Gauss
Parallel
-22°F to +176°F
30 Watts Max
3 Volts
85 Gauss
Parallel
-22°F to +176°F
+
Load
RED
AC
Supply
+
WHT
Supply
AC/DC
RED
BLK
–
BLK
Supply
6-24 VDC
Load
–
BLK
RED
BLK
WHT
–
Supply
AC/DC
+
Load
RED
WHT
Load
*Note: for 8" bore add 9 to part number. Example: CS7-9-04
CS7 Series
1.28
(32.5)
1.66
(42.2)
Indicator Light
.86
(21.8)
.68
(17.3)
Hook Up
Cable
.68
(17.3)
1.27 (32.3)
.33
(8.3)
Brookville, OH USA
.85
(21.6)
1.40 (35.6)
Phone 937-833-4033
www.norgren.com
ACT-2-35
Section 3
Series N
Non-Rotating Cylinders
Series N and Series Q Features................................................ACT-3-2
Technical Information ................................................................ACT-3-3
Basic Cylinder 01 (MX0) ............................................................ACT-3-4
Cylinder with 20 (Not NFPA) Base Bar ....................................ACT-3-6
Cylinder with 02 (MS4) Bottom Tap..........................................ACT-3-8
Cylinder with 04 (MF1) Front Flange ......................................ACT-3-10
Cylinder with 05 (MF2) Rear Flange .......................................ACT-3-12
Cylinder with 07 (MP2) Detachable Clevis.............................ACT-3-14
Cylinder with 18 (MP4) Detachable Eye .................................ACT-3-16
Double Rod End Cylinder........................................................ACT-3-18
Double Rod End Cylinder with 20 (Not NFPA) Base Bar ........ACT-3-20
Double Rod End Cylinder with 02 (MS4) Bottom Tap ..........ACT-3-22
Double Rod End Cylinder with 04 (MF1) Front Flange.........ACT-3-24
Cylinder Tooling Plates/Accessories .....................................ACT-3-26
Switch Information ...................................................................ACT-3-28
Series N Order Information .....................................................ACT-3-30
Cylinder Weights and Seal Kits ..............................................ACT-3-31
ACT-3-4 –
01 (MX0) Basic Cylinder
ACT-3-6 –
Cylinder with
20 (Not NFPA) Base Bar
ACT-3-8 –
Cylinder with
02 (MS4) Bottom Tap
ACT-3-10 –
Cylinder with
04 (MF1) Front Flange
ACT-3-12 –
Cylinder with
05 (MF2) Rear Flange
ACT-3-14 –
Cylinder with
07 (MP2) Detachable Clevis
ACT-3-16 –
Cylinder with
18 (MP4) Detachable Eye
ACT-3-18 –
Double Rod End Cylinder
ACT-3-20 –
with 20 (Not NFPA) Base Bar
ACT-3-22 –
with 02 (MS4) Bottom Tap
ACT-3-24 –
with 04 (MF1) Front Flange
ACT-3-24 –
with 05 (MF2) Rear Flange
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-3-1
Series N Actuators
The finest materials for each component!
1 Piston Seals: Lip-type carboxylated
nitrile incorporating Teflon® and other
non-lube additives as integral parts of
the compound. Extremely smooth stroke
performance and “no lube added”
operation results from reduced friction.
5 Rod Seals: Rounded lip-type
carboxylated nitrile incorporating Teflon®
and other non-lube additives as integral
parts of the compound. Extremely smooth
stroke performance and “no lube added”
operation results from reduced friction.
Rod Seal is pressure-energized and
wear-compensating.
(6061-T6) solid aluminum bar, anodized
for corrosion resistance.
4 Rod Wiper: Lip-type urethane
aggressively wipes foreign material from
piston rod.
3
1
6 Piston Rods: High-strength, hardchrome plated, ground and polished steel.
2
5
3
4
6
8
7
9
10
11
8
7 Ultra Cushion®: State-of-the-art
12
design features a unique, one-piece, nitrile
compound seal, captured within a precision
machined groove. Linear and radial “float”
Ultra Cushions provide exceptionally fast
“out of cushion” stroke reversal. (Head and
13
10 Tube: 6063-T832 aluminum alloy
ideally suited for air service. Tube is clear
anodized on the O.D. and “hard anodic
coated” on the I.D. resulting in a smooth,
file-hard (60RC), corrosion-resistant
and score-resistant surface finish.
14
maintains compression on tube end seals.
12 Retainer: High-strength steel is used
to retain rod bearings.
13 Rod Bearings: Machined from durable,
close-grained cast iron, then completely
coated with Teflon® to insure permanent
lubrication and corrosion resistance.
14 Tooling Plate: Machined from solid
steel and notched for secure attachment.
Modular and pilot adaptor plates are
available to add to the tooling plate
mounting. (Use of modular and pilot
adapter plates adds to overall length.)
Series Q
Series Q cylinders are designed for corrosive environments. They are identical to the Series N in design, function, and dimensions, but
have electroless nickel plating and stainless steel components to create significant resistance to corrosion.
Features:
Head, cap, tube , bushings, front plate, mounts, tooling plate, tie rod nuts, and screws are plated with electroless nickel to a minimum
thickness of .0005".
Piston rod, tie rods, and cushion needles are made from 300 series stainless steel.
ACT-3-2
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series N Actuators
Transverse Loads
40 (178)
4" Bore
Load
35 (156)
30 (133)
25 (111)
80 (9.0)
75 (8.5)
70 (7.9)
65 (7.3)
NOTE: For strokes or loads not
listed consult factory.
31/4" Bore
60 (6.8)
4" Bore
31/4" Bore
11/2" Bore
15 (67)
11/8" Bore
Load
50 (5.6)
Transverse or torsional loads
placed on the cylinder will cause
some deflection of the piston
rods. Excessive deflection will
adversely affect cylinder life and
should be considered at the time
of initial application design.
20 (89)
45 (5.1)
40 (4.5)
35 (4.0)
30 (3.4)
25 (2.8)
21/2" Bore
2"
Bore
11/2"
Bore
20 (2.3)
15 (1.7)
5 (22)
11/8"
Bore
10 (1.1)
TORQUE
INCH POUNDS
(NEWTON METERS)
0 (0)
POUNDS
(NEWTONS)
Load
55 (6.2)
21/2" Bore
2" Bore
10 (44)
Torsional Loads
The transverse and torsional load
graphs shown are to be utilized as
a guideline with respect to the
maximum load and stroke of each
bore size.
0
(0)
5 (.56)
0 (0)
0
(0)
5
10
15
20
25
30
35
40
(127) (254) (381) (508) (635) (762) (889) (1016)
5
(127)
10
(254)
15
(381)
20
(508)
25
(635)
30
(762)
35
(889)
STROKE INCHES (mm)
STROKE INCHES (mm)
Extend
Extend
Retrac
Retrac
Theoretical Extend and Retract Forces in pounds (newtons)
Bore
Movement
Effective
Piston
Area In2 (cm2)
Extend
.99 (6.41)
1-1/8"
Retract
.84 (5.43)
Extend
1.77 (11.40)
1-1/2"
Retract
1.55 (9.97)
Extend
3.14 (20.27)
2"
Retract
2.53 (16.31)
Extend
4.91 (31.67)
2-1/2"
Retract
4.30 (27.71)
Extend
8.30 (53.32)
3-1/4"
Retract
7.51 (48.45)
Extend
12.57 (81.07)
4"
Retract 11.78 (76.01)
Extend Double Rod Forces
Standard
.88 (5.69)
1-1/8"
Oversize
.80 (5.15)
Standard 1.46 (9.42)
1-1/2"
Oversize
.98 (6.34)
Standard 2.84 (18.29)
2"
Oversize 2.36 (15.21)
Standard 4.60 (29.69)
2-1/2"
Oversize 4.12 (26.61)
Standard 7.51 (48.46)
3-1/4"
Oversize 6.81 (43.94)
Standard 11.78 (76.01)
4"
Oversize 11.08 (71.49)
PSI (bar)
Cu Ft (cm3)
Displacement
Per In of Stroke
20
20
17
35
31
63
51
98
86
166
150
251
236
(1)
(88)
(75)
(157)
(138)
(280)
(225)
(437)
(382)
(738)
(668)
(1118)
(1049)
40
40
34
71
62
126
101
196
172
332
300
503
471
(3)
(177)
(150)
(315)
(275)
(559)
(450)
(874)
(765)
(1477)
(1337)
(2237)
(2097)
50
50
42
88
77
157
126
245
215
415
376
628
589
(3)
(221)
(187)
(393)
(344)
(699)
(562)
(1092)
(956)
(1846)
(1671)
(2796)
(2621)
60
60
50
106
93
189
152
295
258
498
451
754
707
(4)
(265)
(225)
(472)
(413)
(839)
(675)
(1311)
(1147)
(2215)
(2005)
(3355)
(3146)
80
80
67
141
124
251
202
393
344
664
601
1005
943
(6)
(354)
(299)
(629)
(550)
(1119)
(900)
(1748)
(1529)
(2953)
(2674)
(4473)
(4194)
100
99
84
177
155
314
253
491
430
830
751
1257
1178
(7)
(442)
(374)
(786)
(688)
(1398)
(1125)
(2185)
(1911)
(3692)
(3342)
(5592)
(5243)
125
124
105
221
193
393
316
614
537
1037
939
1571
1473
(9)
(553)
(468)
(983)
(860)
(1748)
(1406)
(2731)
(2389)
(4615)
(4177)
(6990)
(6553)
150
149
126
265
232
471
379
736
644
1244
1127
1885
1767
(10)
(664)
(561)
(1179)
(1032)
(2097)
(1687)
(3277)
(2867)
(5538)
(5013)
(8388)
(7864)
.00058 (16)
.00049 (14)
.00102 (29)
.00089 (25)
.00182 (52)
.00146 (41)
.00284 (80)
.00249 (71)
.00480 (136)
.00435 (123)
.00727 (206)
.00682 (193)
18
16
29
20
57
47
92
82
150
136
236
222
(79)
(71)
(130)
(87)
(252)
(210)
(410)
(367)
(668)
(606)
(1049)
(986)
35
32
58
39
113
94
184
165
300
272
471
443
(157)
(142)
(260)
(175)
(505)
(420)
(819)
(734)
(1337)
(1212)
(2097)
(1972)
44
40
73
49
142
118
230
206
376
341
589
554
(196)
(178)
(325)
(218)
(631)
(524)
(1024)
(918)
(1671)
(1515)
(2621)
(2466)
53
48
88
59
170
141
276
247
451
409
707
665
(235)
(213)
(390)
(262)
(757)
(629)
(1229)
(1101)
(2005)
(1819)
(3146)
(2959)
71
64
117
79
227
189
368
330
601
545
942
886
(314)
(284)
(520)
(350)
(1009)
(839)
(1638)
(1468)
(2674)
(2425)
(4194)
(3945)
88
80
146
98
284
236
460
412
751
681
1178
1108
(392)
(355)
(650)
(437)
(1262)
(1049)
(2048)
(1835)
(3342)
(3031)
(5243)
(4931)
110
100
183
123
354
295
575
516
939
851
1473
1385
(491)
(444)
(812)
(546)
(1577)
(1311)
(2560)
(2294)
(4178)
(3789)
(6553)
(6164)
132
120
219
147
425
354
690
619
1127
1022
1767
1662
(589)
(533)
(975)
(655)
(1892)
(1573)
(3072)
(2753)
(5014)
(4546)
(7864)
(7397)
.00051 (14)
.00047 (13)
.00084 (24)
.00057 (16)
.00164 (46)
.00137 (39)
.00266 (75)
.00239 (68)
.00435 (123)
.00394 (112)
.00682 (193)
.00641 (181)
-20°F to 200°F
(-29°C to 93°C)
Operating Pressure:
250 psig (17.2 bar)
1-1/8" Bore pressure rating
150 psi
Bore Sizes: 1-1/8", 1-1/2", 2", 2-1/2",
3-1/4", 4"
Supply:
Filtered compressed air to 250 psi
(for hydraulic service consult factory.)
Materials:
Head and end caps - anodized 6061-T6
aluminum
anodized O.D., hard coat anodized I.D.
Brookville, OH USA
Phone 937-833-4033
Piston Rod: C1141 hard chrome plated
steel
Piston: 2011-T451aluminum
Rod Bearings: G2 Durabar cast iron, teflon
coated
Seals: carboxylated nitrile
Tie Rods: 12L14 steel
www.norgren.com
ACT-3-3
Series N Actuators
Basic Actuator 01 (MX0)
● Basic Cylinders available in 1-1/8" thru 4" bore sizes.
● Cylinders rated to 250 PSI air.
(For hydraulic service consult factory)
● Low breakaway seal design.
● Position sensing switches available on all bore
sizes.
(See ACT-3-28/29 for ordering information.)
■ ■ ■ ■ ■
1
N
Q
2
3
4
5
–
■ 0 1
6
7
–
8
■ ■ B ■ ■
9
10 11 12 13
Series N
Series Q Electroless Nickel
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
* Double Rod End has two Piston Rods on one
end and one Piston Rod on opposite end.
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
1
2**
3
4
D
J
P
E
K
R
A
B
G
N
C
H
M
X
Cushions not available on 11/8" Bore.
**Standard position
†
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
E
Horizontal Rod Axis
N
Vertical Rod Axis
A
No Tooling Plate - Horizontal Rod
B
No Tooling Plate - Vertical Rod
C
Blank Rod End - Horizontal Rod*
D
Blank Rod End - Vertical Rod*
X
Special
* Does not include tooling plate
Brookville, OH USA
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
Switch, Port, and
Cushion Needle
Positions
(As viewed from
twin rod end)
ACT-3-4
Design Level
†
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Magnetic Option
No Magnet
Magnetic Piston
B
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Double Rod W/OS Cap Rod
Stainless Piston Rods
Viton Seals
Special
O
M
P
R
S
V
X
Phone 937-833-4033
07
18
20
XX
Det. Clevis (MP2)
Det. Eye (MP4)
Base Bar
Special
Vertical Rod Axis
Horizontal Rod Axis
1
1
4
2 4
3
www.norgren.com
2
3
Series N Actuators
MM Rod ∅
B Bushing ∅
1
Y
P1 *
EE NPT Port
Each End
P + Stroke
D
4
2 E Sq.
3
A
*Head Port is off center on
vertical rod axis with
port in position 1 or 3,
horizontal rod axis with
port in position 2 or 4.
C
RE Sq.
J
V
G
F
DD Tap
BB Deep
4 Places
LB + Stroke
AC
KK Tap
B1 Deep
4 Places
ZB + Stroke
.031 x 45°
Chamfer
GS∅
BM∅
Dimension
A
AC
B
B1
BB
BM
C
D
DD
E
EE
F
G
GS
HD
J
KK
LB
MM
N
P
P1
RE
RG
TT
TZ
V
Y
ZB
.1-1/8" Bore (28.58)
.625
1.250
.500
.188
.270
.625
.627
1.500
.250
1.000
.190
.250
.625
2.250
.312
.400
1.469
.241
1.125
.580
.750
1.250
2.031
3.750
(15.88)
(31.75)
N/A
(12.70)
(4.78)
(6.86)
(15.88)
(15.93)
10 – 32
(38.10)
1/8
(6.35)
(25.4)
(4.83)
(6.35)
(15.88)
6 – 32
(57.15)
(7.92)
(10.16)
(37.31)
(6.12)
(28.58)
(14.73)
(19.05)
(31.75)
N/A
(51.59)
(95.25)
Standard Tooling Plate
N
HD
Across
Flats
(Included with Cylinder)
RG
TT Sq.
A
TZ Sq.
.1-1/2" Bore (38.10)
.625
1.500
.590
.312
.330
.875
.750
2.000
.375
1.500
.250
.312
1.000
3.625
.375
.400
2.125
.303
1.428
.580
1.125
1.500
.250
2.875
5.500
(15.88)
(38.10)
(14.99)
Thru
(7.92)
(8.38)
(22.23)
(19.05)
1/4 – 28
(50.80)
1/4
(9.53)
(38.10)
(6.35)
(7.92)
(25.40)
10 – 32
(92.08)
(9.53)
(10.16)
(53.98)
(7.70)
(36.27)
(14.73)
(28.58)
(38.10)
(6.35)
(73.03)
(139.70)
Brookville, OH USA
.2" Bore (50.80)
.750
1.500
.900
.312
.550
.750
1.052
2.500
.375
1.500
.500
.500
1.000
3.625
.625
.526
2.125
.480
1.840
.705
1.430
2.000
.250
2.875
5.500
(19.05)
(38.10)
(22.86)
Thru
(7.92)
(13.97)
(19.05)
(26.72)
5/16 – 24
(63.50)
1/4
(9.53)
(38.10)
(12.70)
(12.70)
(25.40)
1/4 – 28
(92.08)
(15.88)
(13.36)
(53.98)
(12.19)
(46.74)
(17.91)
(36.32)
(50.80)
(6.35)
(73.03)
(139.70)
.2-1/2" Bore (63.50)
.750
1.750
.900
.312
.550
1.000
1.398
3.000
.375
1.500
.500
.500
1.000
3.750
.625
.526
2.250
.635
2.192
.705
1.840
2.500
.250
3.125
5.875
(19.05)
(44.45)
(22.86)
Thru
(7.92)
(13.97)
(25.40)
(35.51)
5/16 – 24
(76.20)
1/4
(9.53)
(38.10)
(12.70)
(12.70)
(25.40)
5/16 – 24
(95.25)
(15.88)
(13.36)
(57.15)
(16.13)
(55.68)
(17.91)
(46.74)
(63.50)
(6.35)
(79.38)
(149.23)
Phone 937-833-4033
.3-1/4" Bore (82.55)
1.250
1.750
1.498
.437
.900
.500
2.000
3.750
.625
1.750
.750
.812
1.250
4.250
1.000
.784
2.625
.845
2.758
1.205
1.790
3.250
.250
3.437
6.625
(31.75)
(44.45)
(38.05)
Thru
(11.10)
(22.86)
(12.70)
(50.80)
3/8 – 24
(95.25)
3/8
(15.88)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(107.95)
(25.40)
(19.81)
(66.68)
(21.46)
(70.05)
(30.61)
(45.47)
(82.55)
(6.35)
(87.30)
(168.28)
www.norgren.com
.4" Bore (101.60)
1.250
1.750
1.498
.437
.900
.500
2.360
4.500
.625
1.750
.750
.812
1.250
4.250
1.000
.784
2.625
.875
3.323
1.205
3.440
4.000
.250
3.437
6.625
(31.75)
(44.45)
(38.05)
Thru
(11.10)
(22.86)
(12.70)
(59.94)
3/8 – 24
(114.30)
3/8
(15.88)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(107.95)
(25.40)
(19.81)
(66.68)
(22.23)
(84.40)
(30.61)
(87.38)
(101.60)
(6.35)
(87.30)
(168.28)
ACT-3-5
Series N Actuators
Cyinder with 20 (Not NFPA) Base Bar
● (Not NFPA) 20 Base Bar Mounts available in
1-1/8" thru 4" bore sizes.
● New low breakaway design.
■ ■ ■ ■ ■
1
N
Q
2
3
4
–
■ 2 0
5
6
7
–
8
■ ■ B ■ ■
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
E
N
A
B
C
D
X
Design Level
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
†
1
2**
B
G
N
C
H
M
4
D
J
P
E
K
R
X
**Standard position
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
Horizontal Rod Axis
Vertical Rod Axis
Special
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
Switch, Port, and
Cushion Needle
Positions
(As viewed from
twin rod end)
07
18
20
XX
Det. Clevis (MP2)
Det. Eye (MP4)
Base Bar
Special
Vertical Rod Axis
Horizontal Rod Axis
1
1
4
2 4
2
ACT-3-6
3
A
†
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Magnetic Option
No Magnet
Magnetic Piston
B
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
Brookville, OH USA
Phone 937-833-4033
3
3
www.norgren.com
Series N Actuators
MM Rod ∅
B Bushing ∅
1
SB Holes
4 Places
P1 *
EE NPT Port
Each End
P + Stroke
Y
D
E
Sq.
2
4
SH
ST
3
SW
C
RE Sq.
J
SU
V
A
TS
SU
G
DD Tap
BB Deep
4 Places
SW
SS + Stroke
US
AC
LB + Stroke
F
ZB + Stroke
KK Tap
B1 Deep
4 Places
XS
.031 x 45°
Chamfer
GS∅
BM∅
N
HD
Across
Flats
RG
A
TT Sq.
TZ Sq.
Dimension
A
AC
B
B1
BB
BM
C
D
DD
E
EE
F
G
GS
HD
J
KK
LB
MM
N
P
P1
RE
RG
SB
SH
SS
ST
SU
SW
TS
TT
TZ
US
V
XS
Y
ZB
.1-1/8" Bore (28.58)
.625
1.250
.500
.188
.270
.625
.627
1.500
.250
1.000
.190
.250
.625
2.250
.312
.400
1.469
.241
1.125
.580
.203
1.000
1.750
.250
.750
.250
1.875
.750
1.250
2.375
1.750
2.031
3.750
(15.88)
(31.75)
N/A
(12.70)
(4.78)
(6.86)
(15.88)
(15.93)
10 – 32
(38.10)
1/8
(6.35)
(25.40)
(4.83)
(6.35)
(15.88)
6 – 32
(57.15)
(7.92)
(10.16)
(37.31)
(6.12)
(28.58)
(14.73)
(5.16)
(25.40)
(44.45)
(6.35)
(19.05)
(6.35)
(47.63)
(19.05)
(31.75)
(60.33)
N/A
(44.45)
(51.59)
(95.25)
.1-1/2" Bore (38.10)
.625
1.500
.590
.312
.330
.875
.750
2.000
.375
1.500
.250
.312
1.000
3.625
.375
.400
2.125
.303
1.428
.580
.437
1.250
2.875
.250
1.125
.375
2.750
1.125
1.500
3.500
.250
2.250
2.875
5.500
(15.88)
(38.10)
(14.99)
Thru
(7.92)
(8.38)
(22.23)
(19.05)
1/4 – 28
(50.80)
1/4
(9.53)
(38.10)
(6.35)
(7.92)
(25.40)
10 – 32
(92.08)
(9.53)
(10.16)
(53.98)
(7.70)
(36.27)
(14.73)
(11.10)
(31.75)
(73.03)
(6.35)
(25.58)
(9.53)
(69.85)
(28.58)
(38.10)
(88.90)
(6.35)
(57.15)
(73.03)
(139.70)
Brookville, OH USA
.2" Bore (50.80)
.750
1.500
.900
.312
.550
.750
1.052
2.500
.375
1.500
.500
.500
1.000
3.625
.625
.526
2.125
.480
1.840
.705
.437
1.500
2.875
.250
1.125
.375
3.250
1.430
2.000
4.000
.250
2.250
2.875
5.500
(19.05)
(38.10)
(22.86)
Thru
(7.92)
(13.97)
(19.05)
(26.72)
5/16 – 24
(63.50)
1/4
(9.53)
(38.10)
(12.70)
(12.70)
(25.40)
1/4 – 28
(92.08)
(15.88)
(13.36)
(53.98)
(12.19)
(46.74)
(17.91)
(11.10)
(38.10)
(73.03)
(6.35)
(25.58)
(9.53)
(82.55)
(36.32)
(50.80)
(101.60)
(6.35)
(57.15)
(73.03)
(139.70)
.2-1/2" Bore(63.50)
.750
1.750
.900
.312
.550
1.000
1.398
3.000
.375
1.500
.500
.500
1.000
3.750
.625
.526
2.250
.635
2.192
.705
.437
1.875
3.000
.375
1.125
.375
3.750
1.840
2.500
4.500
.250
2.500
3.125
5.875
(19.05)
(44.45)
(22.86)
Thru
(7.92)
(13.97)
(25.40)
(35.51)
5/16 – 24
(76.20)
1/4
(9.53)
(38.10)
(12.70)
(12.70)
(25.40)
5/16 – 24
(95.25)
(15.88)
(13.36)
(57.15)
(16.13)
(55.68)
(17.91)
(11.10)
(47.63)
(76.20)
(9.53)
(25.58)
(9.53)
(95.25)
(46.74)
(63.50)
(114.30)
(6.35)
(63.50)
(79.38)
(149.23)
Phone 937-833-4033
.3-1/4" Bore (82.55)
1.250
1.750
1.498
.437
.900
.500
2.000
3.750
.625
1.750
.750
.812
1.250
4.250
1.000
.784
2.625
.845
2.758
1.205
.563
2.375
3.250
.500
1.250
.500
4.750
1.790
3.250
5.750
.250
2.875
3.437
6.625
(31.75)
(44.45)
(38.05)
Thru
(11.10)
(22.86)
(12.70)
(50.80)
3/8 – 24
(95.25)
3/8
(15.88)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(107.95)
(25.40)
(19.81)
(66.68)
(21.46)
(70.05)
(30.61)
(14.30)
(60.33)
(82.55)
(12.70)
(31.75)
(12.70)
(120.65)
(45.47)
(82.55)
(146.05)
(6.35)
(73.03)
(87.30)
(168.28)
www.norgren.com
.4" Bore (101.60)
1.250
1.750
1.498
.437
.900
.500
2.360
4.500
.625
1.750
.750
.812
1.250
4.250
1.000
.784
2.625
.875
3.323
1.205
.563
2.750
3.250
.500
1.250
.500
5.500
3.440
4.000
6.500
.250
2.875
3.437
6.625
(31.75)
(44.45)
(38.05)
Thru
(11.10)
(22.86)
(12.70)
(59.94)
3/8 – 24
(114.30)
3/8
(15.88)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(107.95)
(25.40)
(19.81)
(66.68)
(22.23)
(84.40)
(30.61)
(14.30)
(69.85)
(82.55)
(12.70)
(31.75)
(12.70)
(139.70)
(87.38)
(101.60)
(165.10)
(6.35)
(73.03)
(87.30)
(168.28)
ACT-3-7
Series N Actuators
Cylinder with 02 (MS4) Bottom Tap
● NFPA (MS4) 02 Bottom Tap Mounts available in
■ ■ ■ ■ ■
1
N
Q
2
3
4
–
■ 0 2
5
6
7
–
8
■ ■ B ■ ■
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
1
2**
3
4
D
J
P
E
K
R
A
B
G
N
C
H
M
X
**Standard position
†
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
E
Horizontal Rod Axis
N
Vertical Rod Axis
A
B
C
D
X
Special
Brookville, OH USA
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
Switch, Port, and
Cushion Needle
Positions
(As viewed from
twin rod end)
Phone 937-833-4033
07
18
20
XX
Det. Clevis (MP2)
Det. Eye (MP4)
Base Bar
Special
Vertical Rod Axis
Horizontal Rod Axis
1
1
4
ACT-3-8
Design Level
†
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Magnetic Option
No Magnet
Magnetic Piston
B
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
2 4
2
3
3
www.norgren.com
Series N Actuators
MM Rod ∅
B Bushing ∅
1
Y
P1*
EE NPT Port
Each End
P + Stroke
D
4
2 E
Sq.
3
V
TN
C
A
NT Tap
TK Deep
4 Places
SN + Stroke
F
AC
LB + Stroke
XT
.031 x 45°
Chamfer
GS∅
BM∅
A
AC
B
B1
BB
BM
C
D
DD
E
EE
F
G
GS
HD
J
KK
LB
MM
N
NT
P
P1
RE
RG
SN
TK
TN
TT
TZ
V
XT
Y
ZB
.1-1/8" Bore (28.58)
.625
1.250
.500
.188
.270
.625
.627
1.500
.250
1.000
.190
.250
.625
2.250
.312
.400
1.469
.241
1.125
.580
1.500
.250
.500
.750
1.250
2.000
2.031
3.750
(15.88)
(31.75)
N/A
(12.70)
(4.78)
(6.86)
(15.88)
(15.93)
10 – 32
(38.10)
1/8
(6.35)
(25.4)
(4.83)
(6.35)
(15.88)
6 – 32
(57.15)
(7.92)
(10.16)
10 – 32
(37.31)
(6.12)
(28.58)
(14.73)
(38.10)
(6.35)
(12.70)
(19.05)
(31.75)
N/A
(50.80)
(51.59)
(95.25)
N
HD
Across
Flats
Dimension
DD Tap
BB Deep
4 Places
KK Tap
B1 Deep
4 Places
ZB + Stroke
RE Sq.
J
G
RG
TT Sq.
A
TZ Sq.
.1-1/2" Bore (38.10)
.625
1.500
.590
.312
.330
.875
.750
2.000
.375
1.500
.250
.312
1.000
3.625
.375
.400
2.125
.303
1.428
.580
2.250
.375
.625
1.125
1.500
.250
2.812
2.875
5.500
(15.88)
(38.10)
(14.99)
Thru
(7.92)
(8.38)
(22.23)
(19.05)
1/4 – 28
(50.80)
1/4
(9.53)
(38.10)
(6.35)
(7.92)
(25.40)
10 – 32
(92.08)
(9.53)
(10.16)
1/4 – 20
(53.98)
(7.70)
(36.27)
(14.73)
(57.15)
(9.53)
(15.88)
(28.58)
(38.10)
(6.35)
(71.42)
(73.03)
(139.70)
Brookville, OH USA
.2" Bore (50.80)
.750
1.500
.900
.312
.550
.750
1.052
2.500
.375
1.500
.500
.500
1.000
3.625
.625
.526
2.125
.480
1.840
.705
2.250
.375
.875
1.430
2.000
.250
2.812
2.875
5.500
(19.05)
(38.10)
(22.86)
Thru
(7.92)
(13.97)
(19.05)
(26.72)
5/16 – 24
(63.50)
1/4
(9.53)
(38.10)
(12.70)
(12.70)
(25.40)
1/4 – 28
(92.08)
(15.88)
(13.36)
5/16 – 18
(53.98)
(12.19)
(46.74)
(17.91)
(57.15)
(9.53)
(22.23)
(36.32)
(50.80)
(6.35)
(71.42)
(73.03)
(139.70)
.2-1/2" Bore (63.50)
.750
1.750
.900
.312
.550
1.000
1.398
3.000
.375
1.500
.500
.500
1.000
3.750
.625
.526
2.250
.635
2.192
.705
2.375
.625
1.250
1.840
2.500
.250
3.063
3.125
5.875
(19.05)
(44.45)
(22.86)
Thru
(7.92)
(13.97)
(25.40)
(35.51)
5/16 – 24
(76.20)
1/4
(9.53)
(38.10)
(12.70)
(12.70)
(25.40)
5/16 – 24
(95.25)
(15.88)
(13.36)
3/8 – 16
(57.15)
(16.13)
(55.68)
(17.91)
(60.33)
(15.88)
(31.75)
(46.74)
(63.50)
(6.35)
(77.80)
(79.38)
(149.23)
Phone 937-833-4033
.3-1/4" Bore (82.55)
1.250
1.750
1.498
.437
.900
.500
2.000
3.750
.625
1.750
.750
.812
1.250
4.250
1.000
.784
2.625
.845
2.758
1.205
2.625
.625
1.500
1.790
3.250
.250
3.437
3.437
6.625
(31.75)
(44.45)
(38.05)
Thru
(11.10)
(22.86)
(12.70)
(50.80)
3/8 – 24
(95.25)
3/8
(15.88)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(107.95)
(25.40)
(19.81)
1/2 – 13
(66.68)
(21.46)
(70.05)
(30.61)
(66.68)
(15.88)
(38.10)
(45.47)
(82.55)
(6.35)
(87.30)
(87.30)
(168.28)
www.norgren.com
.4" Bore (101.60)
1.250
1.750
1.498
.437
.900
.500
2.360
4.500
.625
1.750
.750
.812
1.250
4.250
1.000
.784
2.625
.875
3.323
1.205
2.625
.750
2.063
3.440
4.000
.250
3.437
3.437
6.625
(31.75)
(44.45)
(38.05)
Thru
(11.10)
(22.86)
(12.70)
(59.94)
3/8 – 24
(114.30)
3/8
(15.88)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(107.95)
(25.40)
(19.81)
1/2 – 13
(66.68)
(22.23)
(84.40)
(30.61)
(66.68)
(19.05)
(52.40)
(87.38)
(101.60)
(6.35)
(87.30)
(87.30)
(168.28)
ACT-3-9
Series N Actuators
Cylinder with 04 (MF1) Front Flange
● NFPA (MF1) 04 Front Flange Mounts available in
■ ■ ■ ■ ■
1
N
Q
2
3
4
5
–
■ 0 4
6
7
–
8
■ ■ B ■ ■
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
1
2**
3
4
D
J
P
E
K
R
A
B
G
N
C
H
M
X
**Standard position
†
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
E
Horizontal Rod Axis
N
Vertical Rod Axis
A
B
C
D
X
Special
Brookville, OH USA
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
Det. Clevis (MP2)
Det. Eye (MP4)
Base Bar
Special
Horizontal Rod Axis
1
1
Switch, Port, and
Cushion Needle
Positions
(As viewed from
twin rod end)
07
18
20
XX
Vertical Rod Axis
4
ACT-3-10
Design Level
†
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Magnetic Option
No Magnet
Magnetic Piston
B
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
Phone 937-833-4033
2 4
2
3
3
www.norgren.com
Series N Actuators
MM Rod ∅
B Bushing ∅
1
FB Holes
4 Places
P1 *
EE NPT Port
Each End
P + Stroke
E Sq.
D
2
4
R
3
A
C
UF
RE Sq.
J
V
TF
G
DD Tap
BB Deep
4 Places
FH
W
LB + Stroke
KK Tap
B1 Deep
4 Places
ZB + Stroke
.031 x 45°
Chamfer
GS∅
BM∅
N
HD
Across
Flats
RG
TT Sq.
Dimension
.1-1/8" Bore (28.58)
.1-1/2" Bore (38.10)
.2" Bore (50.80)
.2-1/2" Bore (63.50)
A
B
B1
BB
BM
C
D
DD
E
EE
FB
FH
G
GS
HD
J
KK
LB
MM
N
P
P1
R
RE
RG
TF
TT
TZ
UF
V
W
Y
ZB
.625
.625
.590
.750
.900
.750
.900
.500
.188
.270
.625
.627
1.500
.219
.250
1.000
.190
.250
.625
2.250
.312
.400
1.469
.241
1.000
1.125
.580
2.000
.750
1.250
2.500
1.250
2.031
3.750
(15.88)
N/A
(12.70)
(4.78)
(6.86)
(15.88)
(15.93)
10 – 32
(38.10)
1/8
(5.56)
(6.35)
(25.4)
(4.83)
(6.35)
(15.88)
6 – 32
(57.15)
(7.92)
(10.16)
(37.31)
(6.12)
(25.40)
(28.58)
(14.73)
(50.80)
(19.05)
(31.75)
(63.50)
N/A
(31.75)
(51.59)
(95.25)
A
TZ Sq.
.312
.330
.875
.750
2.000
.312
.375
1.500
.250
.312
1.000
3.625
.375
.400
2.125
.303
1.430
1.428
.580
2.750
1.125
1.500
3.750
.250
1.500
2.875
5.500
(15.88)
(14.99)
Thru
(7.92)
(8.38)
(22.23)
(19.05)
1/4 – 28
(50.80)
1/4
(7.92)
(9.53)
(38.10)
(6.35)
(7.92)
(25.40)
10 – 32
(92.08)
(9.53)
(10.16)
(53.98)
(7.70)
(36.32)
(36.27)
(14.73)
(69.85)
(28.58)
(38.10)
(95.25)
(6.35)
(38.10)
(73.03)
(139.70)
Brookville, OH USA
.312
.550
.750
1.052
2.500
.375
.375
1.500
.500
.500
1.000
3.625
.625
.526
2.125
.480
1.840
1.840
.705
3.375
1.430
2.000
4.125
.250
1.500
2.875
5.500
(19.05)
(22.86)
Thru
(7.92)
(13.97)
(19.05)
(26.72)
5/16 – 24
(63.50)
1/4
(9.53)
(9.53)
(38.10)
(12.70)
(12.70)
(25.40)
1/4 – 28
(92.08)
(15.88)
(13.36)
(53.98)
(12.19)
(46.74)
(46.74)
(17.91)
(85.73)
(36.32)
(50.80)
(104.78)
(6.35)
(38.10)
(73.03)
(139.70)
.312
.550
1.000
1.398
3.000
.375
.375
1.500
.500
.500
1.000
3.750
.625
.526
2.250
.635
2.190
2.192
.705
3.875
1.840
2.500
4.625
.250
1.750
3.125
5.875
(19.05)
(22.86)
Thru
(7.92)
(13.97)
(25.40)
(35.51)
5/16 – 24
(76.20)
1/4
(9.53)
(9.53)
(38.10)
(12.70)
(12.70)
(25.40)
5/16 – 24
(95.25)
(15.88)
(13.36)
(57.15)
(16.13)
(55.63)
(55.68)
(17.91)
(98.43)
(46.74)
(63.50)
(117.48)
(6.35)
(44.45)
(79.38)
(149.23)
Phone 937-833-4033
.3-1/4" Bore (82.55)
1.250
1.498
.437
.900
.500
2.000
3.750
.437
.625
1.750
.750
.812
1.250
4.250
1.000
.784
2.625
.845
2.760
2.758
1.205
4.688
1.790
3.250
5.500
.250
1.750
3.437
6.625
(31.75)
(38.05)
Thru
(11.10)
(22.86)
(12.70)
(50.80)
3/8 – 24
(95.25)
3/8
(11.10)
(15.88)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(107.95)
(25.40)
(19.81)
(66.68)
(21.46)
(70.10)
(70.05)
(30.61)
(119.08)
(45.47)
(82.55)
(139.70)
(6.35)
(44.45)
(87.30)
(168.28)
www.norgren.com
.4" Bore (101.60)
1.250
1.498
.437
.900
.500
2.360
4.500
.437
.625
1.750
.750
.812
1.250
4.250
1.000
.784
2.625
.875
3.320
3.323
1.205
5.437
3.440
4.000
6.250
.250
1.750
3.437
6.625
(31.75)
(38.05)
Thru
(11.10)
(22.86)
(12.70)
(59.94)
3/8 – 24
(114.30)
3/8
(11.10)
(15.88)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(107.95)
(25.40)
(19.81)
(66.68)
(22.23)
(84.33)
(84.40)
(30.61)
(138.10)
(87.38)
(101.60)
(158.75)
(6.35)
(44.45)
(87.30)
(168.28)
ACT-3-11
Series N Actuators
Cylinder with 05 (MF2) Rear Flange
● NFPA (MF2) 05 Rear Flange Mounts available in
■ ■ ■ ■ ■
1
N
Q
2
3
4
5
–
■ 0 5
6
7
–
8
■ ■ B ■ ■
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
1
2**
3
4
D
J
P
E
K
R
A
B
G
N
C
H
M
X
**Standard position
†
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
E
Horizontal Rod Axis
N
Vertical Rod Axis
A
B
C
D
X
Special
Brookville, OH USA
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
(As viewed from
twin rod end)
07
18
20
XX
Det. Clevis (MP2)
Det. Eye (MP4)
Base Bar
Special
Vertical Rod Axis
Horizontal Rod Axis
1
1
Switch, Port, and
Cushion Needle
Positions
4
ACT-3-12
Design Level
Cushions†
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Magnetic Option
No Magnet
Magnetic Piston
B
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
Phone 937-833-4033
2 4
2
3
3
www.norgren.com
Series N Actuators
MM Rod ∅
B Bushing ∅
1
Y
P1*
EE NPT Port
Each End
P + Stroke
FB Holes
4 Places
RE Sq.
D
4
2
R
3
J
V
E Sq.
A
TF
FH
UF
G
C
F
AC
LB + Stroke
ZB + Stroke
KK Tap
B1 Deep
4 Places
ZF + Stroke
.031 x 45°
Chamfer
GS∅
BM∅
N
HD
Across
Flats
RG
TT Sq.
A
TZ Sq.
Dimension
A
AC
B
B1
BM
C
D
E
EE
F
FB
FH
G
GS
HD
J
KK
LB
MM
N
P
P1
R
RE
RG
TF
TT
TZ
UF
V
Y
ZB
ZF
.1-1/8" Bore (28.58)
.625
1.250
.500
.270
.625
.627
1.500
.250
.219
.250
1.000
.190
.250
.625
2.250
.312
.400
1.469
.241
1.000
1.125
.580
2.000
.750
1.250
2.500
2.031
3.750
4.000
(15.88)
(31.75)
N/A
(12.70)
(6.86)
(15.88)
(15.93)
(38.10)
1/8
(6.35)
(5.56)
(6.35)
(25.4)
(4.83)
(6.35)
(15.88)
6 – 32
(57.15)
(7.92)
(10.16)
(37.31)
(6.12)
(25.40)
(28.58)
(14.73)
(50.80)
(19.05)
(31.75)
(63.50)
N/A
(51.59)
(95.25)
(101.60)
.1-1/2" Bore (38.10)
.625
1.500
.590
.330
.875
.750
2.000
.375
.312
.375
1.500
.250
.312
1.000
3.625
.375
.400
2.125
.303
1.430
1.428
.580
2.750
1.125
1.500
3.750
.250
2.875
5.500
5.875
(15.88)
(38.10)
(14.99)
Thru
(8.38)
(22.23)
(19.05)
(50.80)
1/4
(9.53)
(7.92)
(9.53)
(38.10)
(6.35)
(7.92)
(25.40)
10 – 32
(92.08)
(9.53)
(10.16)
(53.98)
(7.70)
(36.32)
(36.27)
(14.73)
(69.85)
(28.58)
(38.10)
(95.25)
(6.35)
(73.03)
(139.70)
(149.23)
Brookville, OH USA
.2" Bore (50.80)
.750
1.500
.900
.550
.750
1.052
2.500
.375
.375
.375
1.500
.500
.500
1.000
3.625
.625
.526
2.125
.480
1.840
1.840
.705
3.375
1.430
2.000
4.125
.250
2.875
5.500
5.875
(19.05)
(38.10)
(22.86)
Thru
(13.97)
(19.05)
(26.72)
(63.50)
1/4
(9.53)
(9.53)
(9.53)
(38.10)
(12.70)
(12.70)
(25.40)
1/4 – 28
(92.08)
(15.88)
(13.36)
(53.98)
(12.19)
(46.74)
(46.74)
(17.91)
(85.73)
(36.32)
(50.80)
(104.78)
(6.35)
(73.03)
(139.70)
(149.23)
.2-1/2" Bore (63.50)
.750
1.750
.900
.550
1.000
1.398
3.000
.375
.375
.375
1.500
.500
.500
1.000
3.750
.625
.526
2.250
.635
2.190
2.192
.705
3.875
1.840
2.500
4.625
.250
3.125
5.875
6.250
(19.05)
(44.45)
(22.86)
Thru
(13.97)
(25.40)
(35.51)
(76.20)
1/4
(9.53)
(9.53)
(9.53)
(38.10)
(12.70)
(12.70)
(25.40)
5/16 – 24
(95.25)
(15.88)
(13.36)
(57.15)
(16.13)
(55.63)
(55.68)
(17.91)
(98.43)
(46.74)
(63.50)
(117.48)
(6.35)
(79.38)
(149.23)
(158.75)
Phone 937-833-4033
.3-1/4" Bore (82.55)
1.250
1.750
1.498
.900
.500
2.000
3.750
.625
.437
.625
1.750
.750
.812
1.250
4.250
1.000
.784
2.625
.845
2.760
2.758
1.205
4.688
1.790
3.250
5.500
.250
3.437
6.625
7.250
(31.75)
(44.45)
(38.05)
Thru
(22.86)
(12.70)
(50.80)
(95.25)
3/8
(15.88)
(11.10)
(15.88)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(107.95)
(25.40)
(19.81)
(66.68)
(21.46)
(70.10)
(70.05)
(30.61)
(119.08)
(45.47)
(82.55)
(139.70)
(6.35)
(87.30)
(168.28)
(184.15)
www.norgren.com
.4" Bore (101.60)
1.250
1.750
1.498
.900
.500
2.360
4.500
.625
.437
.625
1.750
.750
.812
1.250
4.250
1.000
.784
2.625
.875
3.320
3.323
1.205
5.437
3.440
4.000
6.250
.250
3.437
6.625
7.250
(31.75)
(44.45)
(38.05)
Thru
(22.86)
(12.70)
(59.94)
(114.30)
3/8
(15.88)
(11.10)
(15.88)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(107.95)
(25.40)
(19.81)
(66.68)
(22.23)
(84.33)
(84.40)
(30.61)
(138.10)
(87.38)
(101.60)
(158.75)
(6.35)
(87.30)
(168.28)
(184.15)
ACT-3-13
Series N Actuators
Cylinder with 07 (MP2)
Detachable Clevis
● NFPA (MP2) 07 Detachable Clevis Mounts
■ ■ ■ ■ ■
1
N
Q
2
3
4
5
–
■ 0 7
6
7
–
8
■ ■ B ■ ■
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
1
2**
3
4
D
J
P
E
K
R
A
B
G
N
C
H
M
X
**Standard position
†
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
E
Horizontal Rod Axis
N
Vertical Rod Axis
A
B
C
D
X
Special
Brookville, OH USA
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
(As viewed from
twin rod end)
07
18
20
XX
Det. Clevis (MP2)
Det. Eye (MP4)
Base Bar
Special
Vertical Rod Axis
Horizontal Rod Axis
1
1
Switch, Port, and
Cushion Needle
Positions
4
ACT-3-14
Design Level
†
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Magnetic Option
No Magnet
Magnetic Piston
B
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
Phone 937-833-4033
2 4
2
3
3
www.norgren.com
Series N Actuators
MM Rod ∅
B Bushing ∅
1
Y
P 1*
EE NPT Port
Each End
L
P + Stroke
CD∅
D
4
2
E Sq.
3
C
M
J
V
A
CW
FL
G
CB
RE Sq.
CW
F
AC
LB + Stroke
ZB + Stroke
KK Tap
B1 Deep
4 Places
ZF + Stroke
.031 x 45°
Chamfer
BM∅
A
AC
B
B1
BM
C
CB
CD
CW
D
E
EE
F
FL
G
GS
HD
J
KK
L
LB
M
MM
N
P
P1
RE
RG
TT
TZ
V
XD
Y
ZB
N
HD
Across
Flats
Dimension
GS∅
RG
TT Sq.
A
TZ Sq.
.1-1/8" Bore (28.58)
.625
1.250
.500
.270
.625
.375
.375
.250
.627
1.500
.250
1.125
1.000
.190
.250
.625
.625
2.250
.375
.312
.400
1.469
.241
1.125
.580
.750
1.250
4.875
2.031
3.750
(15.88)
(31.75)
N/A
(12.70)
(6.86)
(15.88)
(9.53)
(9.53)
(6.35)
(15.93)
(38.10)
1/8
(6.35)
(28.58)
(25.4)
(4.83)
(6.35)
(15.88)
6 – 32
(15.88)
(57.15)
(9.53)
(7.92)
(10.16)
(37.31)
(6.12)
(28.58)
(14.73)
(19.05)
(31.75)
N/A
(123.83)
(51.59)
(95.25)
.1-1/2" Bore (38.10)
.625
1.500
.590
.330
.875
.750
.500
.500
.750
2.000
.375
1.125
1.500
.250
.312
1.000
.750
3.625
.625
.375
.400
2.125
.303
1.428
.580
1.125
1.500
.250
6.625
2.875
5.500
(15.88)
(38.10)
(14.99)
Thru
(8.38)
(22.23)
(19.05)
(12.70)
(12.70)
(19.05)
(50.80)
1/4
(9.53)
(28.58)
(38.10)
(6.35)
(7.92)
(25.40)
10 – 32
(19.05)
(92.08)
(15.88)
(9.53)
(10.16)
(53.98)
(7.70)
(36.27)
(14.73)
(28.58)
(38.10)
(6.35)
(168.28)
(73.03)
(139.70)
Brookville, OH USA
.2" Bore (50.80)
.750
1.500
.900
.550
.750
.750
.500
.500
1.052
2.500
.375
1.125
1.500
.500
.500
1.000
.750
3.625
.625
.625
.526
2.125
.480
1.840
.705
1.430
2.000
.250
6.625
2.875
5.500
(19.05)
(38.10)
(22.86)
Thru
(13.97)
(19.05)
(19.05)
(12.70)
(12.70)
(26.72)
(63.50)
1/4
(9.53)
(28.58)
(38.10)
(12.70)
(12.70)
(25.40)
1/4 – 28
(19.05)
(92.08)
(15.88)
(15.88)
(13.36)
(53.98)
(12.19)
(46.74)
(17.91)
(36.32)
(50.80)
(6.35)
(168.28)
(73.03)
(139.70)
.2-1/2" Bore (63.50)
.750
1.750
.900
.550
1.000
.750
.500
.500
1.398
3.000
.375
1.125
1.500
.500
.500
1.000
.750
3.750
.625
.625
.526
2.250
.635
2.192
.705
1.840
2.500
.250
7.000
3.125
5.875
(19.05)
(44.45)
(22.86)
Thru
(13.97)
(25.40)
(19.05)
(12.70)
(12.70)
(35.51)
(76.20)
1/4
(9.53)
(28.58)
(38.10)
(12.70)
(12.70)
(25.40)
5/16 – 24
(19.05)
(95.25)
(15.88)
(15.88)
(13.36)
(57.15)
(16.13)
(55.68)
(17.91)
(46.74)
(63.50)
(6.35)
(177.80)
(79.38)
(149.23)
Phone 937-833-4033
.3-1/4" Bore (82.55)
1.250
1.750
1.498
.900
.500
1.250
.750
.625
2.000
3.750
.625
1.875
1.750
.750
.812
1.250
1.250
4.250
.875
1.000
.784
2.625
.845
2.758
1.205
1.790
3.250
.250
8.375
3.437
6.625
(31.75)
(44.45)
(38.05)
Thru
(22.86)
(12.70)
(31.75)
(19.05)
(15.88)
(50.80)
(95.25)
3/8
(15.88)
(47.63)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(31.75)
(107.95)
(22.23)
(25.40)
(19.81)
(66.68)
(21.46)
(70.05)
(30.61)
(45.47)
(82.55)
(6.35)
(212.73)
(87.30)
(168.28)
www.norgren.com
.4" Bore (101.60)
1.250
1.750
1.498
.900
.500
1.250
.750
.625
2.360
4.500
.625
1.875
1.750
.750
.812
1.250
1.250
4.250
.875
1.000
.784
2.625
.875
3.323
1.205
3.440
4.000
.250
8.375
3.437
6.625
(31.75)
(44.45)
(38.05)
Thru
(22.86)
(12.70)
(31.75)
(19.05)
(15.88)
(59.94)
(114.30)
3/8
(15.88)
(47.63)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(31.75)
(107.95)
(22.23)
(25.40)
(19.81)
(66.68)
(22.23)
(84.40)
(30.61)
(87.38)
(101.60)
(6.35)
(212.73)
(87.30)
(168.28)
ACT-3-15
Series N Actuators
Cylinder with 18 (MP4) Detachable Eye
● NFPA (MP4) 18 Detachable Eye Mounts available in
■ ■ ■ ■ ■
1
N
Q
2
3
4
–
■ 1 8
5
6
7
–
8
■ ■ B ■ ■
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
E
N
A
B
C
D
X
Design Level
†
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
1
2**
4
B
G
N
C
H
M
D
J
P
E
K
R
X
**Standard position
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
Horizontal Rod Axis
Vertical Rod Axis
Special
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
(As viewed from
twin rod end)
07
18
20
XX
Det. Clevis (MP2)
Det. Eye (MP4)
Base Bar
Special
Vertical Rod Axis
Horizontal Rod Axis
1
1
Switch, Port, and
Cushion Needle
Positions
4
2 4
2
ACT-3-16
3
A
†
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Magnetic Option
No Magnet
Magnetic Piston
B
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
Brookville, OH USA
Phone 937-833-4033
3
3
www.norgren.com
Series N Actuators
MM Rod ∅
B Bushing ∅
1
Y
EE NPT Port
Each End
L
P + Stroke
CD∅
D
4
2 E Sq.
3
G
C
M
J
V
A
CB
RE Sq.
FL
F
AC
LB + Stroke
ZB + Stroke
KK Tap
B1 Deep
4 Places
XD + Stroke
.031 x 45°
Chamfer
BM∅
A
AC
B
B1
BM
C
CB
CD
D
E
EE
F
FL
G
GS
HD
J
KK
L
LB
M
MM
N
P
P1
RE
RG
TT
TZ
V
XD
Y
ZB
.500
.270
.625
.375
.375
.627
1.500
.250
1.125
1.000
.190
.250
.625
.625
2.250
.375
.312
.400
1.469
.241
1.125
.580
.750
1.250
4.875
2.031
3.750
RG
TT SQ.
E
TZ SQ.
.1-1/8" Bore (28.58)
.625
1.250
N
HD
Across
Flats
Dimension
GS∅
(15.88)
(31.75)
N/A
(12.70)
(6.86)
(15.88)
(9.53)
(9.53)
(15.93)
(38.10)
1/8
(6.35)
(28.58)
(25.4)
(4.83)
(6.35)
(15.88)
6 – 32
(15.88)
(57.15)
(9.53)
(7.92)
(10.16)
(37.31)
(6.12)
(28.58)
(14.73)
(19.05)
(31.75)
N/A
(123.83)
(51.59)
(95.25)
.1-1/2" Bore (38.10)
.625
1.500
.590
.330
.875
.750
.500
.750
2.000
.375
1.125
1.500
.250
.312
1.000
.750
3.625
.625
.375
.400
2.125
.303
1.428
.580
1.125
1.500
.250
6.625
2.875
5.500
(15.88)
(38.10)
(14.99)
Thru
(8.38)
(22.23)
(19.05)
(12.70)
(19.05)
(50.80)
1/4
(9.53)
(28.58)
(38.10)
(6.35)
(7.92)
(25.40)
10 – 32
(19.05)
(92.08)
(15.88)
(9.53)
(10.16)
(53.98)
(7.70)
(36.27)
(14.73)
(28.58)
(38.10)
(6.35)
(168.28)
(73.03)
(139.70)
Brookville, OH USA
.2" Bore (50.80)
.750
1.500
.900
.550
.750
.750
.500
1.052
2.500
.375
1.125
1.500
.500
.500
1.000
.750
3.625
.625
.625
.526
2.125
.480
1.840
.705
1.430
2.000
.250
6.625
2.875
5.500
(19.05)
(38.10)
(22.86)
Thru
(13.97)
(19.05)
(19.05)
(12.70)
(26.72)
(63.50)
1/4
(9.53)
(28.58)
(38.10)
(12.70)
(12.70)
(25.40)
1/4 – 28
(19.05)
(92.08)
(15.88)
(15.88)
(13.36)
(53.98)
(12.19)
(46.74)
(17.91)
(36.32)
(50.80)
(6.35)
(168.28)
(73.03)
(139.70)
.2-1/2" Bore (63.50)
.750
1.750
.900
.550
1.000
.750
.500
1.398
3.000
.375
1.125
1.500
.500
.500
1.000
.750
3.750
.625
.625
.526
2.250
.635
2.192
.705
1.840
2.500
.250
7.000
3.125
5.875
(19.05)
(44.45)
(22.86)
Thru
(13.97)
(25.40)
(19.05)
(12.70)
(35.51)
(76.20)
1/4
(9.53)
(28.58)
(38.10)
(12.70)
(12.70)
(25.40)
5/16 – 24
(19.05)
(95.25)
(15.88)
(15.88)
(13.36)
(57.15)
(16.13)
(55.68)
(17.91)
(46.74)
(63.50)
(6.35)
(177.80)
(79.38)
(149.23)
Phone 937-833-4033
.3-1/4" Bore (82.55)
1.250
1.750
1.498
.900
.500
1.250
.750
2.000
3.750
.625
1.875
1.750
.750
.812
1.250
1.250
4.250
.875
1.000
.784
2.625
.845
2.758
1.205
1.790
3.250
.250
8.375
3.437
6.625
(31.75)
(44.45)
(38.05)
Thru
(22.86)
(12.70)
(31.75)
(19.05)
(50.80)
(95.25)
3/8
(15.88)
(47.63)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(31.75)
(107.95)
(22.23)
(25.40)
(19.81)
(66.68)
(21.46)
(70.05)
(30.61)
(45.47)
(82.55)
(6.35)
(212.73)
(87.30)
(168.28)
www.norgren.com
.4" Bore (101.60)
1.250
1.750
1.498
.900
.500
1.250
.750
2.360
4.500
.625
1.875
1.750
.750
.812
1.250
1.250
4.250
.875
1.000
.784
2.625
.875
3.323
1.205
3.440
4.000
.250
8.375
3.437
6.625
(31.75)
(44.45)
(38.05)
Thru
(22.86)
(12.70)
(31.75)
(19.05)
(59.94)
(114.30)
3/8
(15.88)
(47.63)
(44.45)
(19.05)
(20.62)
(31.75)
3/8 – 24
(31.75)
(107.95)
(22.23)
(25.40)
(19.81)
(66.68)
(22.23)
(84.40)
(30.61)
(87.38)
(101.60)
(6.35)
(212.73)
(87.30)
(168.28)
ACT-3-17
Series N Actuators
● Double Rod End Cylinders available in 1-1/8"
thru 4" bore sizes.
■ ■ ■ ■ ■
1
N
Q
2
3
4
–
■ 0 1
5
6
7
–
8
■ ■ B ■ ■
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
E
N
A
B
C
D
X
Design Level
Cushions†
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
1
2**
3
4
D
J
P
E
K
R
A
B
G
N
C
H
M
X
**Standard position
†
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
Horizontal Rod Axis
Vertical Rod Axis
Special
Note: 11/8" diameter not NFPA
Brookville, OH USA
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
Vertical Rod Axis
(As viewed from
twin rod end)
20
XX
4
Phone 937-833-4033
Base Bar
Special
Horizontal Rod Axis
1
Switch, Port, and
Cushion Needle
Positions
ACT-3-18
Magnetic Option
No Magnet
Magnetic Piston
B
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
1
2
2 4
3
3
www.norgren.com
Series N Actuators
SHOWN WITH ROD EXTENDED TO THE LEFT
MM Rod ∅
B Bushing ∅
1
EE NPT Port Each End
P + Stroke
Y + Stroke
P1*
BA Bushing ∅
MA Rod ∅
KA
Thds.
D
4
2
E Sq.
AA
3
A
G
V
C + Stroke
F
CA
RM
VA
AC + Stroke
LD + Stroke
FA
ZM 2 x Stroke
.031 x 45°
Chamfer
KK Tap
B1 Deep
4 Places
DA
Across
Flats
GS∅
BM∅
N
HD
Across
Flats
.1-1/8" Bore (28.58)
A
.625
.625
.750
1.250
Standard
Oversize
AC
B
B1
BA
.500
Standard
Oversize
BM
C
CA
.270
.625
.250
.250
.627
.312
.437
1.500
Standard
Oversize
D
DA
Standard
Oversize
E
EE
F
FA
G
GS
HD
KA
.250
.125
1.00
.190
.250
Standard
Oversize
KK
LD
MA
†
Standard
Oversize
MM
N
P
P1
RG
RM
Standard
Oversize
TT
TZ
V
VA
Y
ZM
TT Sq.
A
TZ Sq.
Dimension
AA
RG
2.875
.375
.500
.312
.400
†
1.844
.241
.580
.750
1.000
.750
1.250
Standard
Oversize
2.031
4.625
†
(15.88)
(15.88)
(19.05)
(31.75)
N/A
(12.70)
N/A
N/A
(6.86)
(15.88)
(6.35)
(6.35)
(15.93)
(7.92)
(11.10)
(38.10)
1/8
(6.35)
(3.18)
(25.40)
(4.83)
(6.35)
3/8 – 24
1/2 – 20
6 – 32
†
(73.03)
(9.53)
(12.70)
(7.92)
(10.16)
†
(46.84)
(6.12)
(14.73)
(19.05)
(25.40)
(19.05)
(31.75)
N/A
N/A
N/A
(51.59)
†
(117.48)
.1-1/2" Bore (38.10)
.625
.750
1.125
1.500
.590
(15.88)
(19.05)
(28.58)
(38.10)
(14.99)
Thru
1.125
(28.58)
1.400
(35.56)
.330
(8.38)
.875
(22.23)
.375
(9.53)
.500
(12.70)
.750
(19.05)
.500
(12.70)
.812
(20.62)
2.000
(50.80)
1/4
.375
(9.53)
.375
(9.53)
1.500
(38.10)
.250
(6.35)
.312
(7.92)
1/2 – 20
3/4 – 16
10 – 32
4.125
(104.78)
.625
(15.88)
1.000
(25.40)
.375
(9.53)
.400
(10.16)
2.125
(53.98)
.303
(7.70)
.580
(14.73)
2.000sq
(50.80)
2.000sq
(50.80)
1.125
(28.58)
1.500
(38.10)
.250
(6.35)
.250
(6.35)
.500
(12.70)
2.875
(73.03)
7.000
(177.80)
.2" Bore (50.80)
.750
.750
1.125
1.500
.900
(19.05)
(19.05)
(28.58)
(38.10)
(22.86)
Thru
1.125
(28.58)
1.500
(38.10)
.550
(13.97)
.750
(19.05)
.375
(9.53)
.500
(12.70)
1.052
(26.72)
.500
(12.70)
.812
(20.62)
2.500
(63.50)
1/4
.375
(9.53)
.375
(9.53)
1.500
(38.10)
.500
(12.70)
.500
(12.70)
1/2 – 20
3/4 – 16
1/4 – 28
4.125
(104.78)
.625
(15.88)
1.000
(25.40)
.625
(15.88)
.526
(13.36)
2.125
(53.98)
.480
(12.19)
.705
(17.91)
2.000
(50.80)
2.500sq
(63.50)
1.430
(36.32)
2.000
(50.80)
.250
(6.35)
.250
(6.35)
.500
(12.70)
2.875
(73.03)
7.000
(177.80)
.2-1/2" Bore (63.50)
.750
.750
1.125
1.750
.900
(19.05)
(19.05)
(28.58)
(44.45)
(22.86)
Thru
1.125
(28.58)
1.500
(38.10)
.550
(13.97)
1.000
(25.40)
.375
(9.53)
.500
(12.70)
1.398
(35.51)
.500
(12.70)
.812
(20.62)
3.000
(76.20)
1/4
.375
(9.53)
.375
(9.53)
1.500
(38.10)
.500
(12.70)
.500
(12.70)
1/2 – 20
3/4 – 16
5/16 – 24
4.250
(107.95)
.625
(15.88)
1.000
(25.40)
.625
(15.88)
.526
(13.36)
2.250
(57.15)
.635
(16.13)
.705
(17.91)
2.000
(50.80)
3.000sq
(76.20)
1.840
(46.74)
2.500
(63.50)
.250
(6.35)
.250
(6.35)
.500
(12.70)
3.125
(81.66)
7.375
(187.33)
.3-1/4" Bore (82.55)
1.250
1.125
1.625
1.750
1.498
1.500
2.000
.900
.500
.500
.625
2.000
.812
1.125
3.750
.625
.625
1.750
.750
.812
4.750
1.000
1.375
1.000
.784
2.625
.845
1.205
2.625
3.375
1.790
3.250
.250
.250
.375
3.437
8.500
(31.75)
(28.58)
(41.28)
(44.45)
(38.05)
Thru
(38.10)
(50.80)
(22.86)
(12.70)
(12.70)
(15.88)
(50.80)
(20.62)
(28.58)
(95.25)
3/8
(15.88)
(15.88)
(44.45)
(19.05)
(20.62)
3/4 – 16
1 – 14
3/8 – 24
(120.65)
(25.40)
(34.93)
(25.40)
(19.81)
(66.68)
(21.46)
(30.61)
(66.68)
(85.73)
(45.47)
(82.55)
(6.35)
(6.35)
(9.53)
(87.30)
(215.90)
.4" Bore (101.60)
1.250
1.125
1.625
1.750
1.498
1.500
2.000
.900
.500
.500
.625
2.360
.812
1.125
4.500
.625
.625
1.750
.750
.812
4.750
1.000
1.375
1.000
.784
2.625
.875
1.205
2.625
3.375
3.440
4.000
.250
.250
.375
3.437
8.500
(31.75)
(28.58)
(41.28)
(44.45)
(38.05)
Thru
(38.10)
(50.80)
(22.86)
(12.70)
(12.70)
(15.88)
(59.94)
(20.62)
(28.58)
(114.30)
3/8
(15.88)
(15.88)
(44.45)
(19.05)
(20.62)
3/4 – 16
1 – 14
3/8 – 24
(120.65)
(25.40)
(34.93)
(25.40)
(19.81)
(66.68)
(22.23)
(30.61)
(66.68)
(85.73)
(87.38)
(101.60)
(6.35)
(6.35)
(9.53)
(87.30)
(215.90)
Note: 11/8" bore overall body is 3/8" longer than our standard Series “C” Double Rod End Cylinder.
†
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-3-19
Series N Actuators
(Not NFPA) Base Bar
● (Not NFPA) 20 Base Bar Mounts available in
● Switches available on all bore sizes
■ ■ ■ ■ ■
1
N
Q
2
3
4
–
■ 2 0
5
6
7
8
–
■ ■ B ■ ■
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
Design Level
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
†
1
2**
4
B
G
N
C
H
M
D
J
P
E
K
R
X
**Standard position
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
Rod Axis
E
Horizontal Rod Axis
N
Vertical Rod Axis
A
B
C
D
X
Special
Vertical Rod Axis
20
XX
Horizontal Rod Axis
1
4
Base Bar
Special
1
2
2 4
ACT-3-30 for complete instructions on how to order cylinders.
ACT-3-20
3
A
†
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Magnetic Option
No Magnet
Magnetic Piston
B
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
Brookville, OH USA
Phone 937-833-4033
3
3
www.norgren.com
Series N Actuators
1
SB Holes
4 Places
P1*
MM Rod ∅
B Bushing ∅
Y + Stroke
EE NPT Port Each End
P + Stroke
BA Bushing ∅
MA Rod∅
KA
Thds.
D
2
4
E Sq.
ST
SF
AA
CA
3
SW
VA
LD + Stroke
FA
SS + Stroke
XS + Stroke
.031 x 45°
Chamfer
DA
Across
Flats
RM
SW
ZM 2 x Stroke
KK Tap
B1 Deep
4 Places
A
GS∅
TT Sq.
BM∅
HD
Across
Flats
A
SU
F
AC + Stroke
US
Dimension
C + Stroke
G
SU
V
A
TS
TZ Sq.
N
RG
.1-1/8" Bore (28.58)
.625
.625
.750
1.250
(15.88)
(15.88)
(19.05)
(31.75)
N/A
(12.70)
N/A
N/A
(6.86)
(15.88)
(6.35)
(6.35)
(15.93)
(7.92)
(11.10)
(38.10)
1/8
(6.35)
(3.18)
.1-1/2" Bore (38.10)
.625
.750
1.125
1.500
.590
(15.88)
Standard
(19.05)
AA
Oversize
(28.58)
AC
(38.10)
B
(14.99)
B1
.500
Thru
Standard
1.125
(28.58)
BA
Oversize
1.400
(35.56)
BM
.270
.330
(8.38)
C
.625
.875
(22.23)
Standard
.250
.375
(9.53)
CA
Oversize
.250
.500
(12.70)
D
.627
.750
(19.05)
Standard
.312
.500
(12.70)
DA
Oversize
.437
.812
(20.62)
E
1.500
2.000
(50.80)
EE
1/4
F
.250
.375
(9.53)
FA
.125
.375
(9.53)
G
1.000
(25.4)
1.500
(38.10)
GS
.190
(4.83)
.250
(6.35)
HD
.250
(6.35)
.312
(7.92)
Standard
3/8 – 24
1/2 – 20
KA
Oversize
1/2 – 20
3/4 – 16
KK
6 – 32
10 – 32
†
†
LD
2.875
(73.03)
4.125
(104.78)
Standard
.375
(9.53)
.625
(15.88)
MA
Oversize
.500
(12.70)
1.000
(25.40)
MM
.312
(7.92)
.375
(9.53)
N
.400
(10.16)
.400
(10.16)
†
†
P
1.844
(46.84)
2.125
(53.98)
P1
.241
(6.12)
.303
(7.70)
RG
.580
(14.73)
.580
(14.73)
Standard
.750
(19.05)
2.000sq
(50.80)
RM
Oversize
1.000
(25.40)
2.000sq
(50.80)
SB
.203
(5.16)
.437
(11.10)
SH
1.000
(25.40)
1.250
(31.75)
SS
2.250
(57.15)
3.375
(85.73)
ST
.250
(6.35)
.250
(6.35)
SU
.750
(19.05)
1.125
(28.58)
SW
.250
(6.35)
.375
(9.53)
TS
1.875
(47.63)
2.750
(69.85)
TT
.750
(19.05)
1.125
(28.58)
TZ
1.250
(31.75)
1.500
(38.10)
US
2.375
(60.33)
3.500
(88.90)
V
N/A
.250
(6.35)
Standard
N/A
.250
(6.35)
VA
Oversize
N/A
.500
(12.70)
XS
1.750
(44.50)
2.250
(57.15)
Y
2.031
(51.59)
2.875
(73.03)
†
†
ZM
4.625
(117.48)
7.000
(177.80)
†
Brookville, OH USA
.2" Bore (50.80)
.750
.750
1.125
1.500
.900
(19.05)
(19.05)
(28.58)
(38.10)
(22.86)
Thru
1.125
(28.58)
1.500
(38.10)
.550
(13.97)
.750
(19.05)
.375
(9.53)
.500
(12.70)
1.052
(26.72)
.500
(12.70)
.812
(20.62)
2.500
(63.50)
1/4
.375
(9.53)
.375
(9.53)
1.500
(38.10)
.500
(12.70)
.500
(12.70)
1/2 – 20
3/4 – 16
1/4 – 28
4.125
(104.78)
.625
(15.88)
1.000
(25.40)
.625
(15.88)
.526
(13.36)
2.125
(53.98)
.480
(12.19)
.705
(17.91)
2.000
(50.80)
2.500sq
(63.50)
.437
(11.10)
1.500
(38.10)
3.375
(85.73)
.250
(6.35)
1.125
(28.58)
.375
(9.53)
3.250
(82.55)
1.430
(36.32)
2.000
(50.80)
4.000
(101.60)
.250
(6.35)
.250
(6.35)
.500
(12.70)
2.250
(57.15)
2.875
(73.03)
7.000
(177.80)
.2-1/2" Bore (63.50)
.750
.750
1.125
1.750
.900
(19.05)
(19.05)
(28.58)
(44.45)
(22.86)
Thru
1.125
(28.58)
1.500
(38.10)
.550
(13.97)
1.000
(25.40)
.375
(9.53)
.500
(12.70)
1.398
(35.51)
.500
(12.70)
.812
(20.62)
3.000
(76.20)
1/4
.375
(9.53)
.375
(9.53)
1.500
(38.10)
.500
(12.70)
.500
(12.70)
1/2 – 20
3/4 – 16
5/16 – 24
4.250
(107.95)
.625
(15.88)
1.000
(25.40)
.625
(15.88)
.526
(13.36)
2.250
(57.15)
.635
(16.13)
.705
(17.91)
2.000
(50.80)
3.000sq
(76.20)
.437
(11.10)
1.875
(47.63)
3.500
(88.90)
.375
(9.53)
1.125
(28.58)
.375
(9.53)
3.750
(95.25)
1.840
(46.74)
2.500
(63.50)
4.500
(114.30)
.250
(6.35)
.250
(6.35)
.500
(12.70)
2.250
(57.15)
3.125
(81.66)
7.375
(187.33)
Phone 937-833-4033
.3-1/4" Bore (82.55)
1.250
1.125
1.625
1.750
1.498
1.500
2.000
.900
.500
.500
.625
2.000
.812
1.125
3.750
.625
.625
1.750
.750
.812
4.750
1.000
1.375
1.000
.784
2.625
.845
1.205
2.625
3.375
.563
2.375
3.750
.500
1.250
.500
4.750
1.790
3.250
5.750
.250
.250
.375
2.875
3.437
8.500
(31.75)
(28.58)
(41.28)
(44.45)
(38.05)
Thru
(38.10)
(50.80)
(22.86)
(12.70)
(12.70)
(15.88)
(50.80)
(20.62)
(28.58)
(95.25)
3/8
(15.88)
(15.88)
(44.45)
(19.05)
(20.62)
3/4 – 16
1 – 14
3/8 – 24
(120.65)
(25.40)
(34.93)
(25.40)
(19.81)
(66.68)
(21.46)
(30.61)
(66.68)
(85.73)
(14.30)
(60.33)
(95.25)
(12.70)
(31.75)
(12.70)
(120.65)
(45.47)
(82.55)
(146.05)
(6.35)
(6.35)
(9.53)
(73.03)
(87.30)
(215.90)
www.norgren.com
.4" Bore (101.60)
1.250
1.125
1.625
1.750
1.498
1.500
2.000
.900
.500
.500
.625
2.360
.812
1.125
4.500
.625
.625
1.750
.750
.812
4.750
1.000
1.375
1.000
.784
2.625
.875
1.205
2.625
3.375
.563
2.750
3.750
.500
1.250
.500
5.500
3.440
4.000
6.500
.250
.250
.375
2.875
3.437
8.500
(31.75)
(28.58)
(41.28)
(44.45)
(38.05)
Thru
(38.10)
(50.80)
(22.86)
(12.70)
(12.70)
(15.88)
(59.94)
(20.62)
(28.58)
(114.30)
3/8
(15.88)
(15.88)
(44.45)
(19.05)
(20.62)
3/4 – 16
1 – 14
3/8 – 24
(120.65)
(25.40)
(34.93)
(25.40)
(19.81)
(66.68)
(22.23)
(30.61)
(66.68)
(85.73)
(14.30)
(69.85)
(95.25)
(12.70)
(31.75)
(12.70)
(139.70)
(87.38)
(101.60)
(165.10)
(6.35)
(6.35)
(9.53)
(73.03)
(87.30)
(215.90)
ACT-3-21
Series N Actuators
(MS4) Bottom Tap
● NFPA (MF1) 02 Bottom Tap Mounts available in
■ ■ ■ ■ ■
1
N
Q
2
3
4
5
–
■ 0 2
6
7
–
8
■ ■ B ■ ■
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
E
N
A
B
C
D
X
Design Level
Cushions†
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
1
2**
B
G
N
C
H
M
4
D
J
P
E
K
R
X
**Standard position
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
Horizontal Rod Axis
Vertical Rod Axis
Special
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
Vertical Rod Axis
4
Det. Clevis (MP2)
Det. Eye (MP4)
Base Bar
Special
Horizontal Rod Axis
1
Switch, Port, and
Cushion Needle
Positions
(As viewed from
twin rod end)
07
18
20
XX
1
2
2 4
ACT-3-22
3
A
†
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Magnetic Option
No Magnet
Magnetic Piston
B
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
Brookville, OH USA
Phone 937-833-4033
3
3
www.norgren.com
Series N Actuators
MM Rod ∅
1
B Bushing ∅
Y + Stroke
P 1*
EE NPT Port
Each End
BA Bushing ∅
P + Stroke
MA Rod ∅
KA Thds.
D
2
4
E Sq.
AA
3
G
V
A
TN
C + Stroke
F
AC + Stroke
horizontal rod axis with .031 x 45°
Chamfer
RM
VA
LD + Stroke
NT Tap
TK Deep
4 Places
FA
KK Tap
B1 Deep
4 Places
ZM 2 x Stroke
XT + Stroke
DA
Across
Flats
CA
SN + Stroke
GS∅
TZ Sq.
BM∅
N
HD
Across
Flats
Dimension
.1-1/8" Bore (28.58)
A
AA
.625
.625
.750
1.250
Standard
Oversize
AC
B
B1
BA
.500
Standard
Oversize
BM
C
CA
Standard
Oversize
D
DA
Standard
Oversize
E
EE
F
FA
G
GS
HD
KA
MA
1.000
.190
.250
Standard
Oversize
†
†
Standard
Oversize
SN
TK
TN
TT
TZ
V
VA
XT
Y
ZM
2.875
.375
.500
.312
.400
Standard
Oversize
MM
N
NT
P
P1
RG
RM
.270
.625
.250
.250
.627
.312
.437
1.500
.250
.125
KK
LD
RG
1.844
.241
.580
.750
1.000
1.875
.250
.500
.750
1.250
Standard
Oversize
2.000
2.031
†
4.625
(15.88)
(15.88)
(19.05)
(31.75)
N/A
(12.70)
N/A
N/A
(6.86)
(15.88)
(6.35)
(6.35)
(15.93)
(7.92)
(11.10)
(38.10)
1/8
(6.35)
(3.18)
(25.4)
(4.83)
(6.35)
3/8 – 24
1/2 – 20
6 – 32
†
(73.03)
(9.53)
(12.70)
(7.92)
(10.16)
10 – 32
†
(46.84)
(6.12)
(14.73)
(19.05)
(25.40)
(47.63)
(6.35)
(12.70)
(19.05)
(31.75)
N/A
N/A
N/A
(50.80)
(51.59)
†
(117.48)
TT Sq.
.1-1/2" Bore (38.10)
.625
.750
1.125
1.500
.590
(15.88)
(19.05)
(28.58)
(38.10)
(14.99)
Thru
1.125
(28.58)
1.400
(35.56)
.330
(8.38)
.875
(22.23)
.375
(9.53)
.500
(12.70)
.750
(19.05)
.500
(12.70)
.812
(20.62)
2.000
(50.80)
1/4
.375
(9.53)
.375
(9.53)
1.500
(38.10)
.250
(6.35)
.312
(7.92)
1/2 – 20
3/4 – 16
10 – 32
4.125
(104.78)
.625
(15.88)
1.000
(25.40)
.375
(9.53)
.400
(10.16)
1/4 – 20
2.125
(53.98)
.303
(7.70)
.580
(14.73)
2.000sq
(50.80)
2.000sq
(50.80)
2.250
(57.15)
.375
(9.53)
.625
(15.88)
1.125
(28.58)
1.500
(38.10)
.250
(6.35)
.250
(6.35)
.500
(12.70)
2.812
(71.42)
2.875
(73.03)
7.000
(177.80)
.2" Bore (50.80)
.750
.750
1.125
1.500
.900
(19.05)
(19.05)
(28.58)
(38.10)
(22.86)
Thru
1.125
(28.58)
1.500
(38.10)
.550
(13.97)
.750
(19.05)
.375
(9.53)
.500
(12.70)
1.052
(26.72)
.500
(12.70)
.812
(20.62)
2.500
(63.50)
1/4
.375
(9.53)
.375
(9.53)
1.500
(38.10)
.500
(12.70)
.500
(12.70)
1/2 – 20
3/4 – 16
1/4 – 28
4.125
(104.78)
.625
(15.88)
1.000
(25.40)
.625
(15.88)
.526
(13.36)
5/16 – 18
2.125
(53.98)
.480
(12.19)
.705
(17.91)
2.000
(50.80)
2.500sq
(63.50)
2.250
(57.15)
.375
(9.53)
.875
22.23
1.430
(36.32)
2.000
(50.80)
.250
(6.35)
.250
(6.35)
.500
(12.70)
2.812
(71.42)
2.875
(73.03)
7.000
(177.80)
.2-1/2" Bore (63.50)
.750
.750
1.125
1.750
.900
(19.05)
(19.05)
(28.58)
(44.45)
(22.86)
Thru
1.125
(28.58)
1.500
(38.10)
.550
(13.97)
1.000
(25.40)
.375
(9.53)
.500
(12.70)
1.398
(35.51)
.500
(12.70)
.812
(20.62)
3.000
(76.20)
1/4
.375
(9.53)
.375
(9.53)
1.500
(38.10)
.500
(12.70)
.500
(12.70)
1/2 – 20
3/4 – 16
5/16 – 24
4.250
(107.95)
.625
(15.88)
1.000
(25.40)
.625
(15.88)
.526
(13.36)
3/8 – 16
2.250
(57.15)
.635
(16.13)
.705
(17.91)
2.000
(50.80)
3.000sq
(76.20)
2.375
(60.33)
.625
(15.88)
1.250
(31.75)
1.840
(46.74)
2.500
(63.50)
.250
(6.35)
.250
(6.35)
.500
(12.70)
3.063
(77.80)
3.125
(81.66)
7.375
(187.33)
A
.3-1/4" Bore (82.55)
1.250
1.125
1.625
1.750
1.498
1.500
2.000
.900
.500
.500
.625
2.000
.812
1.125
3.750
.625
.625
1.750
.750
.812
4.750
1.000
1.375
1.000
.784
2.625
.845
1.205
2.625
3.375
2.625
.625
1.500
1.790
3.250
.250
.250
.375
3.437
3.437
8.500
(31.75)
(28.58)
(41.28)
(44.45)
(38.05)
Thru
(38.10)
(50.80)
(22.86)
(12.70)
(12.70)
(15.88)
(50.80)
(20.62)
(28.58)
(95.25)
3/8
(15.88)
(15.88)
(44.45)
(19.05)
(20.62)
3/4 – 16
1 – 14
3/8 – 24
(120.65)
(25.40)
(34.93)
(25.40)
(19.81)
1/2 – 13
(66.68)
(21.46)
(30.61)
(66.68)
(85.73)
(66.68)
(15.88)
(38.10)
(45.47)
(82.55)
(6.35)
(6.35)
(9.53)
(87.30)
(87.30)
(215.90)
.4" Bore (101.60)
1.250
1.125
1.625
1.750
1.498
1.500
2.000
.900
.500
.500
.625
2.360
.812
1.125
4.500
.625
.625
1.750
.750
.812
4.750
1.000
1.375
1.000
.784
2.625
.875
1.205
2.625
3.375
2.625
.750
2.063
3.440
4.000
.250
.250
.375
3.437
3.437
8.500
(31.75)
(28.58)
(41.28)
(44.45)
(38.05)
Thru
(38.10)
(50.80)
(22.86)
(12.70)
(12.70)
(15.88)
(59.94)
(20.62)
(28.58)
(114.30)
3/8
(15.88)
(15.88)
(44.45)
(19.05)
(20.62)
3/4 – 16
1 – 14
3/8 – 24
(120.65)
(25.40)
(34.93)
(25.40)
(19.81)
1/2 – 13
(66.68)
(22.23)
(30.61)
(66.68)
(85.73)
(66.68)
(19.05)
(52.40)
(87.38)
(101.60)
(6.35)
(6.35)
(9.53)
(87.30)
(87.30)
(215.90)
†
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-3-23
Series N Actuators
(MF1) Front Flange
● NFPA (MF1) 04 Front Flange Mounts available in
■ ■ ■ ■ ■
1
N
Q
2
3
4
–
■ 0 4
5
6
7
–
8
■ ■ B ■ ■
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
E
N
A
B
C
D
X
Design Level
†
Cushions
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
1
2**
B
G
N
C
H
M
4
D
J
P
E
K
R
X
**Standard position
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
Horizontal Rod Axis
Vertical Rod Axis
Special
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
Vertical Rod Axis
4
Det. Clevis (MP2)
Det. Eye (MP4)
Base Bar
Special
Horizontal Rod Axis
1
Switch, Port, and
Cushion Needle
Positions
(As viewed from
twin rod end)
07
18
20
XX
1
2
2 4
ACT-3-24
3
A
†
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
Magnetic Option
No Magnet
Magnetic Piston
B
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
Brookville, OH USA
Phone 937-833-4033
3
3
www.norgren.com
Series N Actuators
1
MM Rod ∅
FB Holes
4 Places
Y + Stroke
P1 *
BA Bushing ∅
EE
NPT Port
Each
End
B Bushing ∅
P + Stroke
MA Rods ∅
KA
Thds.
E Sq.
D
4
R
2
AA
3
TF
W + Stroke
N
Standard
Oversize
B
B1
.500
Standard
Oversize
BM
C
.270
.625
.250
.250
.627
.312
.437
1.500
Standard
Oversize
D
KA
Standard
Oversize
.125
.219
.250
1.000
.190
.250
Standard
Oversize
KK
LD
MA
†
Standard
Oversize
MM
N
P
P1
R
RG
RM
Standard
Oversize
TF
TT
TZ
UF
V
VA
W
Y
ZM
RG
.625
.625
.750
E
EE
FA
FB
FH
G
GS
HD
KK Tap
B1 Deep
4 Places
FA
2.875
.375
.500
.312
.400
†
1.844
.241
1.000
.580
.750
1.000
2.000
.750
1.250
2.500
Standard
Oversize
1.250
2.031
†
4.625
DA
Across
Flats
TZ Sq.
.1-1/8" Bore (28.58)
DA
VA
LD + Stroke
FH
BM∅
A
CA
RM
GS∅
Dimension
BA
CA
ZM 2 x Stroke
.031 x 45°
Chamfer
HD
Across
Flats
†
C + Stroke
A
UF
AA
G
V
(15.88)
(15.88)
(19.05)
N/A
(12.70)
N/A
N/A
(6.86)
(15.88)
(6.35)
(6.35)
(15.93)
(7.92)
(11.10)
(38.10)
1/8
(3.18)
(5.56)
(6.35)
(25.4)
(4.83)
(6.35)
3/8 – 24
1/2 – 20
6 – 32
†
(73.03)
(9.53)
(12.70)
(7.92)
(10.16)
†
(46.84)
(6.12)
(25.40)
(14.73)
(19.05)
(25.40)
(50.80)
(19.05)
(31.75)
(63.50)
N/A
N/A
N/A
(31.75)
(51.59)
†
(117.48)
.1-1/2" Bore (38.10)
.625
.750
1.125
.590
(15.88)
(19.05)
(28.58)
(14.99)
Thru
1.125
(28.58)
1.400
(35.56)
.330
(8.38)
.875
(22.23)
.375
(9.53)
.500
(12.70)
.750
(19.05)
.500
(12.70)
.812
(20.62)
2.000
(50.80)
1/4
.375
(9.53)
.312
(7.92)
.375
(9.53)
1.500
(38.10)
.250
(6.35)
.312
(7.92)
1/2 – 20
3/4 – 16
10 – 32
4.125
(104.78)
.625
(15.88)
1.000
(25.40)
.375
(9.53)
.400
(10.16)
2.125
(53.98)
.303
(7.70)
1.430
(36.32)
.580
(14.73)
2.000sq
(50.80)
2.000sq
(50.80)
2.750
(69.85)
1.125
(28.58)
1.500
(38.10)
3.750
(95.25)
.250
(6.35)
.250
(6.35)
.500
(12.70)
1.500
(38.10)
2.875
(73.03)
7.000
(177.80)
.2" Bore (50.80)
.750
.750
1.125
.900
(19.05)
(19.05)
(28.58)
(22.86)
Thru
1.125
(28.58)
1.500
(38.10)
.550
(13.97)
.750
(19.05)
.375
(9.53)
.500
(12.70)
1.052
(26.72)
.500
(12.70)
.812
(20.62)
2.500
(63.50)
1/4
.375
(9.53)
.375
(9.53)
.375
(9.53)
1.500
(38.10)
.500
(12.70)
.500
(12.70)
1/2 – 20
3/4 – 16
1/4 – 28
4.125
(104.78)
.625
(15.88)
1.000
(25.40)
.625
(15.88)
.526
(13.36)
2.125
(53.98)
.480
(12.19)
1.840
(46.74)
.705
(17.91)
2.000
(50.80)
2.500sq
(63.50)
3.375
(85.73)
1.430
(36.32)
2.000
(50.80)
4.125
(104.78)
.250
(6.35)
.250
(6.35)
.500
(12.70)
1.500
(38.10)
2.875
(73.03)
7.000
(177.80)
.2-1/2" Bore (63.50)
.750
.750
1.125
.900
(19.05)
(19.05)
(28.58)
(22.86)
Thru
1.125
(28.58)
1.500
(38.10)
.550
(13.97)
1.000
(25.40)
.375
(9.53)
.500
(12.70)
1.398
(35.51)
.500
(12.70)
.812
(20.62)
3.000
(76.20)
1/4
.375
(9.53)
.375
(9.53)
.375
(9.53)
1.500
(38.10)
.500
(12.70)
.500
(12.70)
1/2 – 20
3/4 – 16
5/16 – 24
4.250
(107.95)
.625
(15.88)
1.000
(25.40)
.625
(15.88)
.526
(13.36)
2.250
(57.15)
.635
(16.13)
2.190
(55.63)
.705
(17.91)
2.000
(50.80)
3.000sq
(76.20)
3.875
(98.43)
1.840
(46.74)
2.500
(63.50)
4.625
(117.48)
.250
(6.35)
.250
(6.35)
.500
(12.70)
1.750
(44.45)
3.125
(81.66)
7.375
(187.33)
TT Sq.
.31/4" Bore (82.55)
1.250
1.125
1.625
1.498
1.500
2.000
.900
.500
.500
.625
2.000
.812
1.125
3.750
.625
.437
.625
1.750
.750
.812
4.750
1.000
1.375
1.000
.784
2.625
.845
2.760
1.205
2.625
3.375
4.688
1.790
3.250
5.500
.250
.250
.375
1.750
3.437
8.500
(31.75)
(28.58)
(41.28)
(38.05)
Thru
(38.10)
(50.80)
(22.86)
(12.70)
(12.70)
(15.88)
(50.80)
(20.62)
(28.58)
(95.25)
3/8
(15.88)
(11.10)
(15.88)
(44.45)
(19.05)
(20.62)
3/4 – 16
1 – 14
3/8 – 24
(120.65)
(25.40)
(34.93)
(25.40)
(19.81)
(66.68)
(21.46)
(70.10)
(30.61)
(66.68)
(85.73)
(119.08)
(45.47)
(82.55)
(139.70)
(6.35)
(6.35)
(9.53)
(44.45)
(87.30)
(215.90)
A
.4" Bore (101.60)
1.250
1.125
1.625
1.498
1.500
2.000
.900
.500
.500
.625
2.360
.812
1.125
4.500
.625
.437
.625
1.750
.750
.812
4.750
1.000
1.375
1.000
.784
2.625
.875
3.320
1.205
2.625
3.375
5.437
3.440
4.000
6.250
.250
.250
.375
1.750
3.437
8.500
(31.75)
(28.58)
(41.28)
(38.05)
Thru
(38.10)
(50.80)
(22.86)
(12.70)
(12.70)
(15.88)
(59.94)
(20.62)
(28.58)
(114.30)
3/8
(15.88)
(11.10)
(15.88)
(44.45)
(19.05)
(20.62)
3/4 – 16
1 – 14
3/8 – 24
(120.65)
(25.40)
(34.93)
(25.40)
(19.81)
(66.68)
(22.23)
(84.33)
(30.61)
(66.68)
(85.73)
(138.10)
(87.38)
(101.60)
(158.75)
(6.35)
(6.35)
(9.53)
(44.45)
(87.30)
(215.90)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-3-25
Series N Actuators
Modular Adaptor Plate Dimensions
Bore
Modular Adaptor Plate
A
TE
TZ
Y
Ø.406 C’Bore
.250 Deep
Ø.281 Thru 2 Places
1-1/8"
NB-172-225K
.625 (15.88)
3.000 (76.20)
1.250 (31.75)
.625 (15.88)
1-1/2"
NB-172-03K
.625 (15.88)
3.000 (76.20)
1.500 (38.10)
.750 (19.05)
2"
NB-172-04K
.625 (15.88)
3.000 (76.20)
2.000 (50.80)
1.000 (25.40)
2-1/2"
NB-172-05K
.625 (15.88)
3.000 (76.20)
2.500 (63.50)
1.250 (31.75)
TZ
Y
2.00
A
TE
Kit includes screws
Eye Bracket
NFPA Eye Bracket Dimensions
DDØ
4 Places
LR Radius
BA
CB
CD
DD
E
F
FL
LR
M
CDØ
M Radius
BA
E
CB
F
FL
BA
C-89-03A
1.625 (41.28)
.750 (19.05)
.500 (12.70)
.406 (10.31)
2.500 (63.50)
.375
(9.53)
1.125 (28.58)
.750 (19.05)
.500 (12.70)
C-89-065A
2.562 (65.07)
1.250
(31.75)
.750 (19.05)
.531 (13.49)
3.500 (88.90)
.625 (15.88)
1.875
(47.63)
1.250 (31.75)
.750
(19.05)
C-89-12A
3.250 (82.55)
1.500
(38.10)
1.000 (25.40)
.656 (16.66)
4.500 (114.30)
.750 (19.05)
2.250 (57.15)
1.500 (38.10)
1.000
(25.40)
E
Clevis Bracket
NFPA Clevis Bracket Dimensions
DD Thds.
4 Places
LR Radius
BA
CB
CD
CW
DD
E
F
FL
LR
M
CDØ
M Radius
BA
E
CB
F
FL
CW
CW
1-1/8" Bore Eye & Clevis Bracket
CDØ
M Radius
E
BA
E
BA
LR Radius
F
FL
CB
C-91-065A
2.562 (65.07)
1.250
(31.75)
.750 (19.05)
.625 (15.88)
1/2-20
3.500 (88.90)
.625 (15.88)
1.875
(47.63)
1.250 (31.75)
.812
(20.62)
CW
CB
BA
BA
E
E
CW
BA
CB
CD
CW
DB
DD
E
F
FL
LR
M
TB
W-89-225K Eye
1.125 (28.58)
.375
(9.53)
.375
(9.53)
–
.328
(8.33)
.203
(5.16)
1.500 (38.10)
.500 (12.70)
1.125 (28.58)
.625 (15.88)
.375
(9.53)
.312
(7.92)
W-91-225K Clevis
1.150
(29.21)
.375
(9.53)
.375
(9.53)
.250
(6.35)
.328
(8.33)
.203
(5.16)
1.500
(38.10)
.500
(12.70)
1.125
(28.58)
.625
(15.88)
.375
(9.53)
.312
(7.92)
Note: 1-1/8" bore eye and clevis brackets include standard pivot pin and mounting screws.
ACT-3-26
C-91-12A
3.250 (82.55)
1.500
(38.10)
1.000 (25.40)
.750 (19.05)
5/8-18
4.500 (114.30)
.750 (19.05)
2.250 (57.15)
1.500 (38.10)
1.000
(25.40)
1-1/8" Bore Eye & Clevis Bracket Dimensions
DDØ Drill Thru
DBØ C’Bore
TB Deep 4 Places
DDØ Drill Thru
DBØ C’Bore
TB Deep 4 Places
C-91-03A
1.625 (41.28)
.750 (19.05)
.500 (12.70)
.500 (12.70)
3/8-24
2.500 (63.50)
.375
(9.53)
1.125 (28.58)
.750 (19.05)
.500 (12.70)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series N Actuators
Pilot Adaptor Plate
Pilot Adaptor Plate Dimensions
CC Thds.
Thru 2 Place
GG
Bore
TZ
1-1/2"
2"
2-1/2"
3/4"
4"
NB-171-03K
NB-171-04K
NB-171-05K
NB-171-065K
NB-171-08K
A
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.875 (22.23)
.875 (22.23)
CC
1/4-20
5/16-18
5/16-18
3/8-16
1/2-13
1/2-13
D 1.260 (32.00) 1.575 (40.01) 1.969 (50.01) 2.480 (62.99) 3.150 (80.01) 3.937 (99.99)
Sq.
D∅
V
A
GG .750 (19.05)
Kit includes screws
.860 (21.84) 1.180 (29.97) 1.500 (38.10) 1.970 (50.04) 2.760 (70.10)
TZ 1.250 (31.75) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.250 (82.55) 4.000(101.60)
V
.160 (4.06)
.160 (4.06)
Y
.625 (15.88)
.750 (19.05) 1.000 (25.40) 1.250 (31.75) 1.625 (41.28) 2.000 (50.80)
.200 (5.08)
.200
(5.08)
.200
(5.08)
.200 (5.08)
Rod Clevis Dimensions
Rod Clevis
CW
CB
CW
ER Radius
CB
CD
CE
CH
CW
ER
KK
L
CDØ
L
CE
KK Thds.
C-92-03
.750 (19.05)
.500
(12.70)
1.500 (38.10)
1.000 (25.40)
.500 (12.70)
.500 (12.70)
1/2-20
.750 (19.05)
C-92-065
1.250 (31.75)
.750
(19.05)
2.375 (60.33)
1.250 (31.75)
.625 (15.88)
.750 (19.05)
3/4-16
1.250 (31.75)
C-92-12
1.500 (38.10)
1.000
(25.40)
3.125 (79.38)
1.500 (38.10)
.750 (19.05)
1.000 (25.40)
1-14
1.500 (38.10)
CH Across Hex Flats
Rod Eye Dimensions
Rod Eye
CD
1-1/8"
NB-171-225K
CD
ER Radius
CB
CB
CD
CE
ER
KK
CD
CDØ
C-97-03
.750 (19.05)
.500
(12.70)
1.500 (38.10)
.562 (14.27)
1/2-20
C-97-065
1.250 (31.75)
.750
(19.05)
2.062 (52.37)
.937 (23.80)
3/4-16
C-97-12
1.500 (38.10)
1.000
(25.40)
2.812 (71.42)
1.125 (28.58)
1-14
CE
A
KK Thds.
Standard Pin Dimensions
Standard Pin
HP
CD
HP
LH
LP
CDØ
LP
LH
NFPA Pin
C-96-225
.375
(9.53)
.156
(3.96)
1.250 (31.75)
1.032 (26.21)
C-96-03
.500 (12.70)
.156
(3.96)
2.250 (57.15)
2.093 (53.16)
C-96-065
.750 (19.05)
.156
(3.96)
3.000 (76.20)
2.843 (72.21)
C-96-12
1.000 (25.40)
.203 (5.18)
3.500 (88.90)
3.297 (83.74)
NFPA Pin Dimensions
øD
CD
LH
LP
øCD
LP
C-96-03A
.500 (12.70)
2.219 (56.36)
1.875 (47.63)
C-96-065A
.750 (19.05)
3.125 (79.38)
2.750 (69.85)
C-96-12A
1.000 (25.40)
3.750 (95.25)
3.250 (82.55)
LH
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-3-27
Series N Actuators
Switches for 1-1/8" to 2-1/2"
Cylinders
● Magnetically operated, non-contact sensing
system.
● Consists of a magnet in the piston, and a
sensing switch clamped to the tie rod holding it
against the cylinder tube.
● One or more switches may be mounted to
provide an indication of piston position.
● Switches are provided with vinyl molded cable.
● Adjustable mounting brackets allow for switches
● Indicator light facilitates installation and
troubleshooting.
● Several switches may be mounted to control or
initiate any sequence function.
● Mounting brackets standard with switches.
Specifications
*Metal Oxide Varistor Surge Suppression. NOTE: All CS7 and CS8 Series Switches are supplied with 9 foot leads.
Switch Model
CS8-2-04 Reed
CS8-2-31 Hall
CS8-2-32 Hall
Bore Sizes
Switch Type
11/8" thru 21/2"
Sourcing PNP
Normally Open
6-24 VDC
11/8" thru 21/2"
Sinking NPN
Normally Open
6-24 VDC
.5 Amp Max
.5 Amp Max
Switching Power
Max Voltage Drop
11/8" thru 21/2"
Reed Switch
*MOV & Light
SPST Normally Open
5-120 VDC/VAC
50/60 Hz
.5 Amp Max
.005 Amp Min
10 VA
3.5 Volts
85 Gauss
12 Watts Max
.5 Volts
85 Gauss
12 Watts Max
.5 Volts
85 Gauss
Temperature Range
-22°F to +176°F
-22°F to +176°F
-22°F to +176°F
Function
Switching Voltage
Switching Current
Wiring Diagrams
–
WHT
+
Supply
120V Max
+
Supply
6-24 VDC
BRN
Load
BRN
0.45
–
–
WHT
Supply
6-24 VDC
GRN
0.10
Load
WHT
+
CS8-2 Series
CS7 Series
1.263
.53
1.28
.698
.425
Indicator Light
1.078
.86
.68
ACT-3-28
Brookville, OH USA
Phone 937-833-4033
Hook Up
Cable
www.norgren.com
BRN
GRN
Load
0.10
Series N Actuators
Hall Effect/Magnetoresistive Working Principle
(mechanical contacts) which are open in their normal state. When a magnetic
field moves within proximity of the switch, magnetism is induced into the leads
and forces the contacts to close.
The solid state (no moving parts) magnetoresitive sensor responds to a north or
south magnetic pole by providing a digital signal to the output control circuit.
This technique enables the sensing of weak magnetic fields, with no limit to the
maximum strength of the magnetic field.
Normally Open Reed
Normally Open Reed
N
+
+
Output
Output
Sensor
S
N
V<>0
–
–
Swith Closed
Switch Open
Sensor
V=0
Magnet
Supply
S
Magnet
Supply
1. Always stay within the specifications and power rating limitations of the unit
installed.
Motors will produce high pulses that will be introduced into the control wiring if
the wiring is carried in the same conduit.
3. Never connect the switch without a load present. The switch will be destroyed.
4. Some electrical loads may be capacitive. Capacitive loading may occur due to
distributed capacity in cable runs over 25 feet. Use switch Model CS7-24
In order to obtain optimum performance and long life, magnetically operated limit
switches should not be subjected to: (1) strong magnetic fields, (2) extreme
temperature, and (3) excessive ferrous filing or chip buildup.
with the listed power ratings, must be carefully observed before connecting power
to the switch.
Lower power switches are designed for signaling electronic circuits. Do not use on
relay loads or with incandescent bulbs. Resistive loads only.
CS7-04 Reed
CS7-24 Reed
CS7-31 Hall
CS7-32 Hall
2" thru 4"
Reed Switch
*MOV & Light
Normally Open
5-240 VDC/VAC
50/60 Hz
1 Amp Max
2" thru 4"
Reed Switch
Normally Open
24-240 VAC
50/60 Hz
4 Amp Max
50 Amp Inrush
100 Watts Max
N/A
85 Gauss
Parallel
-22°F to +176°F
2" thru 4"
Sourcing PNP
Normally Open
6-24 VDC
2" thru 4"
Sinking NPN
Normally Open
6-24 VDC
1 Amp Max
1 Amp Max
24 Watts Max
.5 Volts
85 Gauss
Parallel
-22°F to +176°F
24 Watts Max
.5 Volts
85 Gauss
Parallel
-22°F to +176°F
30 Watts Max
3 Volts
85 Gauss
Parallel
-22°F to +176°F
+
Load
RED
AC
Supply
BLK
WHT
Supply
AC/DC
–
+
Load
RED
BLK
Supply
6-24 VDC
–
BLK
RED
–
BLK
WHT
Load
Supply
AC/DC
+
RED
WHT
Load
1.66
(42.2)
.68
(17.3)
1.27 (32.3)
.33
(8.3)
Brookville, OH USA
.85 (21.6)
1.40 (35.6)
Phone 937-833-4033
www.norgren.com
ACT-3-29
Series N Actuators
N C 0 4 J
1
N
Q
2
3
4
–
E 0 2
5
6
7
–
8
A M B O O
9
10 11 12 13
Series N
Single Rod End
B
C
D
E
F
G
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Double Rod End*
P
Q
R
S
T
U
O
M
00
0" Stroke
01
1" Stroke
02
2" Stroke
03
3" Stroke
04
4" Stroke
05
5" Stroke
06
6" Stroke
...
...
30
xx
Magnetic Option
No Magnet
Magnetic Piston
B
Design Level
Cushions†
Needle Position
No Cushions
Head Only
Cap Only
Head and Cap
Special
30" Stroke
Special
A
0"
J
B
1/16"
K
C
1/8"
M
D
3/16"
N
E
1/4"
P
F
5/16"
R
G
3/8"
S
H
7/16"
T
X
Special
E
N
A
B
C
D
X
Options
No Options
Metal Rod Scraper
Air/Oil Piston
Viton Seals
Special
O
M
P
R
S
V
X
1
2**
4
B
G
N
C
H
M
D
J
P
E
K
R
X
**Standard position
†
Ports
Position
Standard
Special
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
Rod Axis
Horizontal Rod Axis
Vertical Rod Axis
Special
1**
A
2
B
3
C
4
D
X
**Standard position
Mounting Options
01
No Mounts (MX0)
02
Bottom Tap (MS4)
04
Front Flange (MF1)
05
Rear Flange (MF2)
07
18
20
XX
(As viewed from
twin rod end)
Det. Clevis (MP2)
Det. Eye (MP4)
Base Bar
Special
Horizontal Rod Axis
Vertical Rod Axis
1
Switch, Port, and
Cushion Needle
Positions
1
4
2
2 4
3
3
11/2"
3
A
41/2"
EXAMPLE: Series “N” –
bore –
stroke – horizontal rod axis – standard tooling plate – MS4 Mount – standard ports at position #1 –
standard cushion head and cap at position #2 – no options.
X = (Description).
Switch, Port, and Cushion Needle Positions
(As viewed from twin rod end)
Available on all bore sizes – order separately. See pages 28 and 29
for specifications.
Vertical Rod Axis
Horizontal Rod Axis
1
1
Proximity Switches
Available on 11/2" thru 4" bores only. See page 30 for specifications.
2
4
4
2
To indicate switch mounting location, use “98” and specify end cap
designations and the desired switch location.
NOTE: Proximity switch position must be 90° from rod axis.
ACT-3-30
Brookville, OH USA
3
Phone 937-833-4033
3
www.norgren.com
Series N Actuators
Cylinder Weights
Bore
1-1/8"
1-1/2"
2"
2-1/2"
3-1/4"
4"
01–02
1 lb
1 lb 3 ozs
1 lb 4 ozs
2 lbs 4 ozs
2 lbs 10 ozs
3 lbs 4 ozs
4 lbs 3 ozs
4 lbs 9 ozs
5 lbs 3 ozs
4 lbs 4 ozs
4 lbs 10 ozs
5 lbs 4 ozs
12 lbs 5 ozs
13 lbs 9 ozs
14 lbs 10 ozs
16 lbs 10 ozs
17 lbs 14 ozs
18 lbs 15 ozs
Single Rod End
Standard Double Rod End
Oversize Double Rod End
Single Rod End
Single Rod End
Single Rod End
Single Rod End
Single Rod End
Mounting Code
04
05
1 lb 2 ozs
1 lb 4 ozs
1 lb 5 ozs
1 lb 7 ozs
1 lb 6 ozs
1 lb 8 ozs
2 lbs 10 ozs
2 lbs 15 ozs
3 lbs
3 lbs 5 ozs
3 lbs 10 ozs
3 lbs 15 ozs
4 lbs 12 ozs
5 lbs 4 ozs
5 lbs 2 ozs
5 lbs 10 ozs
5 lbs 12 ozs
6 lbs 4 ozs
4 lbs 15 ozs
5 lbs 12 ozs
5 lbs 5 ozs
6 lbs 2 ozs
5 lbs 15 ozs
6 lbs 12 ozs
13 lbs 10 ozs
15 lbs 12 ozs
14 lbs 14 ozs
17 lbs
15 lbs 15 ozs
18 lbs 1 oz
17 lbs 13 ozs
21 lbs 1 oz
19 lbs 1 oz
22 lbs 5 ozs
20 lbs 2 ozs
23 lbs 6 ozs
07–18
1 lb 6 ozs
1 lb 9 ozs
1 lb 10 ozs
2 lbs 14 ozs
3 lbs 4 ozs
3 lbs 14 ozs
5 lbs 4 ozs
5 lbs 10 ozs
6 lbs 4 ozs
5 lbs 7 ozs
5 lbs 13 ozs
6 lbs 7 ozs
15 lbs 3 ozs
16 lbs 7 ozs
17 lbs 8 ozs
20 lbs 8 ozs
21 lbs 12 ozs
22 lbs 13 ozs
Add Per Inch
of Stroke
2 ozs
2.5 ozs
2.8 ozs
4 ozs
5.4 ozs
7.6 ozs
4 ozs
5.4 ozs
7.6 ozs
6 ozs
7.4 ozs
9.6 ozs
11 ozs
14.6 ozs
17.7 ozs
12 ozs
15.6 ozs
1 lb 2.7 ozs
20
1 lb 3 ozs
1 lb 6 ozs
1 lb 7 ozs
2 lbs 8 ozs
2 lbs 8 ozs
3 lbs 14 ozs
4 lbs 8 ozs
4 lbs 14 ozs
5 lbs 8 ozs
4 lbs 13 ozs
5 lbs 3 ozs
5 lbs 13 ozs
13 lbs 5 ozs
14 lbs 9 ozs
15 lbs 5 ozs
17 lbs 12 ozs
19 lbs
20 lbs 1 oz
Standard
Pilot
Modular
Tooling Plate Adaptor Plate Adaptor Plate
4 ozs
1.2 ozs
3.4 ozs
6 ozs
1.8 ozs
4.1 ozs
12 ozs
3.3 ozs
5.8 ozs
1 lb 3 ozs
5.2 ozs
7.0 ozs
3 lbs 6 ozs
11.4 ozs
N/A
5 lbs 6 ozs
19.4 ozs
N/A
Single Rod End Cylinder
1
2
Single Rod End Seal Kits
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Number
NBSK-225
NBSK-03
NBSK-04
NBSK-05
NBSK-065
NBSK-08
Seal Kit Consists of:
Item
Description
1
Rod wiper
2
Rod seal
3
Tube seal
4
Piston seal
5
Wear band
4
3
5
3
Double Rod End Seal Kits
Quantity
2
2
2
2*
1
Bore
11/8"
11/2"
2"
21/2"
31/4"
4"
Number
NBSK-225D
NBSK-03D
NBSK-04D
NBSK-05D
NBSK-065D
NBSK-08D
*One bidirectional piston seal for the 11/8" bore
Seal Kit Consists of:
Item
Description
1
Rod wiper
2
Rod seal
3
Tube seal
4
Piston seal
5
Wear band
6
Bushing Seal
7
Rod seal
8
Rod wiper
Quantity
2
2
2
2
1
1
1
1
1
2
3
Brookville, OH USA
4
Phone 937-833-4033
5
3 7
www.norgren.com
6
8
ACT-3-31
Section 4
8000 & 8000/M
Lightweight Cylinders to ISO
Standard 6431 and VDMA 24562
Series 8000, 8000/M, P/8000, P/8000/M and PV/8000/M Pneumatic Cylinders
Technical Features: 8000 and 8000/M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-2
Technical Features: P/8000 and P/8000/M Profile, PV/8000/M Corrosive Resistant . . . . . . . . . . .ACT-4-3
Cylinder Model Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-4
Theoretical Forces, Technical Features, Materials, Surface Treatments . . . . . . . . . . . . . . . . . . . .ACT-4-5
Important Information about ISO/VDMA Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-6
How to Order Numbering System
8000, 8000/M Basic Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-6
P/8000, P/8000/M Profile Cylinder, PV/8000/M Corrosive Resistant Cylinder . . . . . . . . . . . . .ACT-4-7
Basic Dimensions 8000, 8000/M, P/8000, P/8000/M and PV/8000/M . . . . . . . . . . . . . . . . . . . . . .ACT-4-8
8000J, 8000/JM, P/8000/JM and PV/8000/JM Double Ended Piston Rod . . . . . . . . . . . . . . . . . . .ACT-4-9
8000/N1, P/8000/N1 and 8000/N2, P/8000/N2 Non-rotating Piston Rod . . . . . . . . . . . . . . . . . . . .ACT-4-9
8000/IT, P/8000/IT and 8000/MT, P/8000/MT Four-position Cylinders . . . . . . . . . . . . . . . . . . . . .ACT-4-9
8000/G, P/8000/G and 8000/MG, P/8000/MG with Piston Rod Bellows . . . . . . . . . . . . . . . . . . .ACT-4-10
8000/L2, P/8000/L2 and 8000/L4, P/8000/L4 with Locking Units . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-10
8000, 8000/M, P/8000, P/8000/M and PV/8000 Mountings
8000/35 Front or Rear Stud, Style A & 8000/22 Rear Flange, Style B . . . . . . . . . . . . . . . . . . . .ACT-4-11
8000/22 Front Flange, Style G & 8000/21 Foot, Style C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-11
8000/25 Piston Rod Clevis, Style F & 8000/26 Front Hinge, Style M . . . . . . . . . . . . . . . . . . . . .ACT-4-12
M/P199 Hinge Bracket for Piston Rod Clevis, Style SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-12
8000/23 Rear Clevis, Style D & 8000/24 Rear Hinge, Style L . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-13
M/P19 or M/P40 Hinge Bracket for Rear Clevis, Style SW . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-13
8000/42 Rear Clevis, Style D2 & 8000/43 Universal Rear Hinge, Style UL . . . . . . . . . . . . . . . . .ACT-4-14
M/P Hinge Bracket for Rear Clevis, Style US . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-14
8000/27 Rear Eye, Style R & 8000/33 Universal Rear Eye, Style UR . . . . . . . . . . . . . . . . . . . . .ACT-4-15
8000/28 Central Trunnion, Style H & 8000/40 Adjustable Intermediate Trunnion, Style UH . . . . .ACT-4-16
PQA/8000/40 Style UH for P/8000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-16
8000/34 Head Detachable Trunnion, Style FH & 8000/34 Cap Detachable Trunnion, Style FH . .ACT-4-17
8000/41 Swivel Bearing, Style S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-17
8000/38 Piston Rod Swivel, Style AK & 8000/32 Universal Piston Rod Eye, Style UF . . . . . . . . .ACT-4-18
QA/8000/51 Guide Blocks (with sintered bronze bearings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-19
QA/8000/61 Guide Blocks (with roller bearings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-20
Load Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-21
Mounting Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-22
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-24
Switch Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-26
Seal Replacement Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-4-27
ACT-5-8 –
8000 Basic Cylinder
ACT-5-8 –
P/8000 Profile Cylinder
ACT-5-8 –
PV/8000 Corrosive
Resistent Cylinder
ACT-5-9 –
Cylinder with Double
Ended Piston Rod
ACT-5-9 –
Cylinder with
Non-Rotating Piston Rod
ACT-5-9 –
Four-position Cylinders
ACT-5-10 –
Cylinder with
Piston Rod Bellows
ACT-5-10 –
Cylinder with
Locking Units
ACT-5-11 –
Cylinder with Front or
Rear Stud, Style A
ACT-5-11 –
Cylinder with Front or
Rear Flange, Style B or G
ACT-5-11 –
Cylinder with Foot, Style C
ACT-5-12 –
Cylinder with Piston Rod
Clevis, Style F
ACT-5-12 –
Cylinder with
Front Hinge, Style M
ACT-5-13 –
Cylinder with Rear Clevis,
Style D
ACT-5-13 –
Cylinder with Rear Hinge,
Style L
ACT-5-14 –
Cylinder with Rear Clevis,
Style D2
ACT-5-14 –
Cylinder with Universal
Rear Hinge, Style UL
ACT-5-15 –
Cylinder with
Rear Eye, Style R
ACT-5-15 –
Rear Eye, Style UR
ACT-5-16 –
Cylinder with Central
Trunnion, Style H
ACT-5-16 –
Adjustable Intermediate
Trunnion, Style UH
ACT-5-17 –
Head Detachable
Trunnion, Style FH
ACT-5-17 –
Cap Detachable
Trunnion,Style FH
ACT-5-17 –
Cylinder with Swivel
Bearing, Style S
ACT-5-18 –
Cylinder with Piston Rod
Swivel, Style AK
ACT-5-18 –
Piston Rod Eye, Style UF
ACT-5-19 –
Cylinder with Guide
Blocks
ACT-5-20 –
Cylinder with Guide Blocks
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-4-1
ISO/VDMA – Pneumatic Cylinders contain the finest materials for each component!
● ISO/VDMA cylinders are known worldwide as
the metric standard for pneumatic cylinders.
● Numerous standard variants for
specialized applications.
● Comprehensive range of standard mounts.
● Non-contact position sensing option.
● Suitable for lubricated and non-lubricated
air supplies.
The complete selection from ø32 to ø320 mm,
corresponds to ISO 6431, NFE 49-003-1
and VDMA 24562.
High performance ISO/VDMA cylinders are
rugged, reliable and ideal for the demands
of today.
Norgren ISO/VDMA Cylinders are available in three models to meet a wide
range of applications:
• Basic
• Profile • Corrosion Resistant
Basic Cylinder Series 8000
1 Tie Rod Nuts: Heavy duty steel (zinc
5 Tube: Precision aluminum tube
ideally suited for air service. Anodized
corrosion resistant surface.
plated) sleeve nuts.
2 Cushioning: Heavy duty cushioning
with fine adjustment is standard.
6 Rod Seal Wiper: The combination
seal/wiper design is molded from tough
abrasion resistant materials for long life
and ease of maintenance.
3 Piston Rod: High performance,
high-strength, ground and polished 303
stainless steel, hard-chrome plated for
excellent protection against wear.
7 Bearing: Heavy duty long wearing
nylon rod bearing.
4 Cushion Sleeves: Smooth
operating polyamide cushion sleeves.
5
4
Basic Cylinder Series 8000
ø32 to ø320 mm
The standard cylinder for all applications.
Robust, technically advanced, superior in
function and efficiency. All sizes are
available with or without a magnetic piston.
Technical Data
Medium: Compressed air, filtered,
lubricated and non-lubricated
Operation: Double acting
8000
Adjustable cushioning
8000/M
Magnetic piston,
adjustable cushioning
Operating Pressure:
1 to 16 bar (14.5 to 232 PSIG)
1 to 10 bar (14.5 to 145 PSIG) for
ø250 mm and ø320 mm
-20°C to +80°C max (-4°F to +176°F max)
3
2
1
[Consult Technical Services for use below +2°C (35°F)]
10
9
6
7
8
8 Cushion Seal: One piece, nitrile
compound seal. Linear and radial float
Designed to provide exceptionally fast
out of cushion stroke reversal.
ACT-4-2
9 Piston Seals: Durable lip type
seals are pressure energized and
wear compensating.
10 Piston: Wear band is standard.
Optional magnetic piston for
non-contact sensing.
Brookville, OH USA
Phone 937-833-4033
Cylinder Diameters: 32, 40, 50, 63, 80,
100,
125, 160, 200, 250, 320 mm
Strokes Lengths: Non-standard strokes
(10 mm to 3000 mm) available
Materials:
Anodized aluminum tube
Pressure diecast aluminum end covers:
ø32
to ø160 mm (gravity cast
aluminum ø200 to ø320 mm)
Chrome plated stainless steel piston rod
Polyurethane piston rod seals: ø32 to ø100
mm
(nitrile rubber ø125 to ø320 mm )
Polyurethane piston seals: ø32 to ø100 mm
(nitrile rubber ø125 to ø320 mm )
Nitrile rubber O-rings
Tie Rod: High strength steel
www.norgren.com
Profile Cylinder Series P/8000
Profile Cylinder Series P/8000
ø32 to ø125 mm
With the same advantages of the basic
cylinder, but a specially shaped profile
aluminum tube with enclosed tie rods to
provide high rigidity and a clean look.
The Profile Series is available with or
without a magnetic piston.
5 Tube: Precision aluminum profile
tube with enclosed tie rods. Clear coat
anodized corrosion resistant surface.
5
Technical Data
Operation: Double acting
P/8000
Adjustable cushioning
P/8000/M
Magnetic piston,
adjustable cushioning
Operating Pressure: 1 to 16 bar (14.5 to 232 PSIG)
Operating Temperature: -20°C to +80°C max (-4°F to +176°F max)
[Consult Technical Services for use below +2°C (+35°F)]
Cylinder Diameters: 32, 40, 50, 63, 80,
100, 125 mm
Materials:
Anodized aluminum profile tube
Profile Tube
Integral Switch Grooves
Tie Rod Construction
Corrosion Resistant Cylinder Series PV/8000/M
Technical Data
Standard on P/8000
and PV/8000
Corrosion Resistant Cylinder Series
PV/8000 ø32 to ø100 mm
A perfect blend of design and function,
incorporating cleanline profile tube and
end caps. Corrosion resistant and
stainless steel materials make this
cylinder ideal for the chemical,
pharmaceutical and food industries.
Magnetic piston is standard.
1 Tie Rod Nuts:
Delta-MCS coated tie rod
Operation: PV/8000/M
sleeve nuts with stainless
Double acting with magnetic piston
steel tie rods.
and adjustable cushioning (corrosion
resistant construction)
Operating Pressure: 1 to 16 bar (14.5 to 232 PSIG)
OperatingTemperature: -20°C to +80°C max (-4°F to +176°F max)
5 Tube: Precision aluminum profile
tube with enclosed tie rods. Clear coat
anodized corrosion resistant surface.
5
2
1
[Consult Technical Services for use below +2°C (+35°F)]
Cylinder Diameters: 32, 40, 50, 63, 80, 100 mm
Materials:
Anodized aluminum profile tube
Black anodized solid aluminum end covers
Chrome plated stainless steel piston rod
303 Series
316 Series stainless steel tie rods
2 Cushioning:
303 Series cushion needle
Stainless steel
cushioning needle.
Brookville, OH USA
11
10
10 Piston: Magnetic
piston is standard.
11 End Covers: Black anodized solid
aluminum ideal for corrosion resistance.
Phone 937-833-4033
www.norgren.com
ACT-4-3
8000, 8000/M, P/8000, P/8000/M and PV/8000/M Pneumatic Cylinders
Cylinder Model Code (Reference)
Symbol
Model
Non-magnetic piston
NA/8000
DA/8000
PDA/8000
Symbol
CA/8000
PCA/8000
RA/8000
PRA/8000
SA/8000
PSA/8000
DA/8000/W1
PDA/8000/W1
DA/8000/X1
PDA/8000/X1
T DA/8000
DA/8000/IU,
PDA/8000/IU
DA/8000/W5
PDA/8000/W5
DA/8000/G
PDA/8000/G
DA/8000/W
PDA/8000/W
DA/8000/X3
PDA/8000/X3
Model
Magnetic piston
NA/8000/M
DA/8000/M
PDA/8000/M
PVA/8000/M
CA/8000/M
PCA/8000/M
RA/8000/M
PRA/8000/M
SA/8000/M
PSA/8000/M
DA/8000/W2
PDA/8000/W2
PVA/8000/W2
DA/8000/X2
PRA/8000/X2
TDA/8000/M
TPDA/8000/M
TPVA/8000/M
DA/8000/MU
PDA/8000/MU
PVA/8000/MU
DA/8000/W6
PDA/8000/W6
PVA/8000/W6
DA/8000/MG
PDA/8000/MG
RA/8000/N1
PRA/8000/N1
DA/8000/MW
PDA/8000/MW
DA/8000/X4
PDA/8000/X4
HDA/8000/M
HPDA/8000/M
HPVA/8000/M
DA/8000/JM
PDA/8000/JM
PVA/8000/JM
DA/8000/W4
PDA/8000/W4
PVA/8000/W4
DA/8000/MT
PDA/8000/MT
PVA/8000/MT
RA/8000/N2
PRA/8000/N2
DA/8000/L2
PDA/8000/L2
DA/8000/L4
PDA/8000/L4
DA/8000/J
PDA/8000/J
DA/8000/W3
PDA/8000/W3
DA/8000/IT
PDA/8000/IT
Description
Dimensions
Page
303 Stainless steel chromium plated piston rod series 303 SS tie rods
Standard cylinder with hard chromium plated stainless steel piston rod (Austenitic) 8
Cylinder with hard chromium plated steel piston rod
8
Cylinder with non-chrome plated stainless steel piston rod (Martensitic)
8
Cylinder with non-chrome plated stainless steel piston rod (Austenitic)
8
Cylinder with special wiper/seal for applications with arizona sand,
cement, plaster (stucco), hoar-frost or ice (ø32 mm to ø125 mm)
8
Low friction cylinders (ø32 mm to ø200 mm)
Medium: Compressed air, filtered and non-lubricated recommended
Cylinder with heat resistant seal 150°C max (302°F max)
8
Cylinder with extended piston rod
9
Cylinder with extended piston rod and special wiper/seal for
applications with arizona sand, cement, plaster (stucco),
hoar-frost or ice (ø32 mm to ø125 mm)
Cylinder with piston rod bellows
8
10
Cylinder without cushioning
8
Low friction cylinders without cushioning (ø32 mm to ø200 mm)
Medium: Compressed air, filtered and non-lubricated recommended
Cylinder with hydraulic (ø32 mm to ø100 mm)
8
Cylinder with double ended piston rod
9
Cylinder with double ended piston rod and special wiper/seal for
applications with arizona sand, cement, plaster (stucco), hoar-frost
or ice (ø32 mm to ø125 mm)
Four position cylinders, ø32 mm to ø200 mm
8
Cylinder with non-rotating piston rod, ø32 mm to ø100 mm
9
Cylinders with locking unit (PASSIVE). Locking is achieved by
spring force on removal of the signal to the unit, ø32 mm to ø125 mm
Operating Pressure for locking unit: 4 to 10 bar (58 to 145 PSI)
10
For combinations of cylinder variants consult Technical Service.
ACT-4-4
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
8
8
9
Theoretical Forces l Cushioning l Air Consumption
ø Cylinder
32
40
50
63
80
100
125
160
200
250
320
Theoretical forces at 6 bar (lbs. at 87 PSI)
Extend
Retract
lbs. Force (Newtons)
108
(482)
93
(414)
169
(754)
142
(633)
265
(1178)
222
(990)
420
(1870)
378
(1680)
678
(3016)
612
(2722)
1059
(4710)
993
(4416)
1656
(7363)
1547
(6882)
2713
(12064)
2543
(11310)
4236
(18840)
4068
(18090)
6619
(29436)
6349
(28236)
10846
(48228)
10634
(47292)
Cushion length
Inch
(mm)
.75
(19)
.87
(22)
.94
(24)
.94
(24)
1.06
(27)
1.34
(34)
1.61
(41)
1.77
(45)
1.77
(45)
2.36
(60)
2.56
(65)
Spring Forces for Cylinder with Locking Unit
ø
32
40
Locking Unit
8032/L2, P/8032/L2 and 8032/L4, P/8032/L4
8040/L2, P/8040/L2 and 8040/L4, P/8040/L4
Spring forces
135
(600)
225
(1000)
50
63
80
100
125
8050/L2, P/8050/L2 and 8050/L4, P/8050/L4
8063/L2, P/8063/L2 and 8063/L4, P/8063/L4
8080/L2, P/8080/L2 and 8080/L4, P/8080/L4
8100/L2, P/8100/L2 and 8100/L4, P/8100/L4
8125/L2, P/8125/L2 and 8125/L4, P/8125/L4
337
495
1124
1124
1574
(1500)
(2200)
(5000)
(5000)
(7000)
●
Initial cushion volume
Inches3
(cm3 )
.75
(12.3)
1.26
(20.7)
2.20
(36)
3.90
(64)
7.08
(116)
14.76
(242)
27.51
(451)
49.78
(816)
80.76
(1324)
176.9
(2900)
317.2
(5200)
Air consumption – Liters/cm of stroke (cubic inches/inch)
Extend
Retract
Inch3
(Liters)
Inch3
(Liters)
8.7
(0.056)
7.5
(0.048)
13.7
(0.088)
11.5
(0.074)
21.3
(0.137)
17.7
(0.114)
33.9
(0.218)
30.3
(0.195)
54.4
(0.35)
49.8
(0.32)
85.5
(0.55)
79.3
(0.51)
133.7
(0.86)
122.9
(0.79)
219.3
(1.41)
205.3
(1.32)
342.1
(2.20)
326.6
(2.10)
534.0
(3.44)
513.2
(3.30)
875.6
(5.63)
841.4
(5.41)
Stroke and Torque for Non-Rotating Piston Rod Cylinders
ø
32
40
Non-Rotating Piston Rod Cylinder
8032/N1, P/8032/N1 and 8032/N2, P/8032/N2
8040/N1, P/8040/N1 and 8040/N2, P/8040/N2
Stroke max.
Inches (mm)
11.8
(300)
15.7
(400)
Torque max.
Inch lbs. (Nm)
4.4
(0.5)
8.9
(1.0)
50
63
80
100
8050/N1, P/8050/N1 and 8050/N2, P/8050/N2
8063/N1, P/8063/N1 and 8063/N2, P/8063/N2
8080/N1, P/8080/N1 and 8080/N2, P/8080/N2
8100/N1, P/8100/N1 and 8100/N2, P/8100/N2
19.7
19.7
23.6
23.6
13.3
13.3
22.1
22.1
(500)
(500)
(600)
(600)
(1.5)
(1.5)
(2.5)
(2.5)
Materials and Surface Treatment of Mountings
Standard
Style A
Corrosion Resistant Construction
Zinc plated steel
Style AK
Zinc plated steel
Styles B, G
Clear anodized aluminum
Style C
Painted steel (zinc plated steel 32 to 63 mm bore)
Style D
Diecast aluminum mounting, stainless steel (Martensitic) bolt
Style D2
Painted cast iron, stainless steel (Martensitic) bolt
Style F
Zinc plated steel
Clear anodized aluminum. Screws: A2
Black corrosion protected diecast aluminum mounting, certified for most food industries.
Bolt: X 10 Cr Ni S 18 9 (1.4305, AISI 303). Circlip: stainless steel (Martensitic). Screws: A2
Nickel plated steel mounting. Circlip: X 10 Cr Ni S 18 9 (1.4305, AISI 303).
Bolt: X 10 Cr Ni S 18 9 (1.4305, AISI 303).
Style FH
Painted cast iron
Style L
Diecast aluminum mounting, stainless steel (Martensitic) bolt
Style M
Zinc plated steel clevis mounting, diecast aluminum hinge
Bolt: X 10 Cr Ni S 18 9 (1.4305, AISI 303). Circlip: stainless steel (Martensitic). Screws: A2
Style R
Diecast aluminum
Style S
Zinc plated steel, sintered bronze bearing bushing
Style SS
Painted cast iron
Style SW
Diecast aluminum
Style UF
Zinc plated steel, mounting hardened steel ball and roller-bearing elements
Nickel plated steel mounting. Inner ring: stainless steel (Austenitic).
Outer ring: nickel plated hardened steel.
Style UH, H
Clear anodized aluminum
Painted cast iron clevis mounting, stainless steel (Martensitic) bolt,
diecast aluminum hinge, hardened steel ball and roller-bearing elements
Style UL
Black corrosion protected diecast aluminum mounting, certified for most food industries. Screws: A2
Style UR
Painted diecast aluminum mounting, hardened steel ball and
roller-bearing elements
Style US
Diecast aluminum (125 mm bore painted cast iron) mounting,
hardened steel ball and roller-bearing elements
Brookville, OH USA
Black corrosion protected diecast aluminum mounting, certified for most food industries. Inner
ring: stainless steel (Austenitic). Outer ring: nickel plated hardened steel.
Phone 937-833-4033
www.norgren.com
ACT-4-5
8000 and 8000/M Pneumatic Cylinders
Important information to know when ordering ISO/VDMA Cylinders:
• ISO 6431 standard defines that cylinders with their
mountings attached are interchangeable.
• ISO 6431/VDMA 24562 further defines that cylinders are
interchangeable with or without mountings.
ISO/VDMA Cylinders are unique: after selecting bore, stroke and
type of cylinder, the desired mounting kit is chosen. These kits
come complete with required mounting hardware. (ACT-4- 22/23)
ISO/VDMA basic cylinder Series 8000 and the Profile Series
P/8000 can be ordered with or without a magnetic piston.
The Corrosive Resistant Cylinder PV/8000 is supplied with a
magnetic piston as standard.
The original Norgren RM/8000 Cylinder was designed to meet
the ISO 6431 standard. The redesigned DA/8000 Cylinder was
designed to meet the ISO 6431 and the VDMA 24562 standard.
Remember, it may be necessary to purchase new mountings
when replacing cylinders that meet only the ISO 6431 standard.
Contact Technical Services with any questions.
EXAMPLES:
DA/8000
DA/8000/M
PDA/8000
PDA/8000/M
PVA/8000/M
The Norgren ISO/VDMA Cylinder is produced worldwide, so
the piston rod ordering code may vary slightly from country to
country. For example, in the USA, the top of the line chrome
plated 303 stainless steel piston rod currently is standard in all
ISO/VDMA Cylinders. Therefore, the cylinder code will have the
letter D /8000 as the piston rod material code designator.
Basic Cylinder
Basic Cylinder, magnetic piston
Profile Cylinder
Profile Cylinder, magnetic piston
Corrosive Resistant Cylinder, magnetic piston
A magnetic piston is required for cylinders that will utilize reed
and solid state switches. See ACT-4-24/26 for a complete list of
switches and mounting brackets.
Alternative letter codes are used on Norgren ISO/VDMA
Cylinders from other countries, such as:
C /8000 = chrome plated steel
R /8000 = 400 series stainless steel (Martensitic) non-chrome plated
S /8000 = 300 series stainless steel (Austenitic) non-chrome plated
N /8000 = 300 series SS (Austenitic) hard chromium plated piston
rod and 300 series SS tie rods non-chrome plated
ISO 6431/VDMA 24562 Basic Cylinder Series 8000
Model Codes
■ ■ ■– 8 ■ ■ ■–■ ■– ■ ■ –■
1
2
3
4
5 6
7
8
9
10
Special Optional
Standard (blank)
H
Hydraulic (ø32mm to ø100mm)
T
Temperature
Option IU or MU
Enter _ _ _ /8 _ _ _ /IU or MU/_ _ /_ _
the additional piston rod length (ACT-4-9)
Mounting style H or UH
Enter _ _ _ /8 _ _ _ /_ /_ _ /H,XV
the XV distance (ACT-4-16)
Piston Rod Material
D
Chrome plated stainless steel
R
Stainless steel non-chrome plated (options N1 and N2)
Stroke (mm)
3000 maximum
Port Threads
A
ISO G
C
NPT
Options
Non-magnetic Piston
Series 8000
Bore Size (Diameters)
032
32mm
040
40mm
050
50mm
063
63mm
080
80mm
100
100mm
125
125mm
160
160mm
200
200mm
250
250mm
320
320mm
ACT-4-6
11
Ordering Examples
Cylinders
To order a basic ø80 mm bore
magnetic piston cylinder with a 50 mm
stroke specify: DA/8080/M/50.
Mountings
To order a front flange mounting style
G for ø80 mm bore cylinder specify:
QA/8080/22. (ACT-4-11)
Brookville, OH USA
W1
X1
IU
W5
G
W
X3
J
W3
IT
N1
L2
Magnetic Piston
Standard cylinder
M
Special wiper/seal (ø32mm to ø125mm)
W2
Low friction (ø32mm to ø200mm)
X2
Additional piston rod length
MU
Additional piston rod, special wiper/seal (ø32mm to ø125mm)
W6
Piston rod boot/bellows (gaiter)
MG
Without cushioning
MW
Without cushioning, low friction (ø32mm to ø200mm)
X4
Double ended piston rod
JM
Double ended piston rod, special wiper/seal (ø32mm to ø125mm)
W4
Four position cylinder (ø32mm to ø200mm) See page 9.
MT
*Non-rotating piston rod (ø32mm to ø100mm)
N2
Passive locking unit (ø32mm to ø125mm)
L4
Phone 937-833-4033
*Requires piston rod material R
www.norgren.com
P/8000, P/8000/M and PV/8000/M Pneumatic Cylinders
ISO 6431/VDMA 24562 Profile Cylinder Series P/8000
Model Codes
■ P ■ ■– 8 ■ ■ ■–■ ■– ■ ■ –■
1
2
3
4
5
6 7
8
9 10
11
12
Option IU or MU
Enter _ _ _ /8 _ _ _ /IU or MU/_ _ /_ _ the
additional piston rod length (ACT-4-9)
Special Optional
Standard (blank)
H
Hydraulic (ø32mm to ø100mm)
T
Temperature
Mounting style H or UH
Enter _ _ _ /8 _ _ _ /_ /_ _ /H,XV
the XV distance (ACT-4-16)
Stroke (mm)
3000 maximum
Profile Cylinder
P
Profile
Options
Piston Rod Material
D Chrome plated stainless steel
R Stainless steel non-chrome plated (options N1 and N2)
Non-magnetic Piston
W1
X1
IU
W5
G
W
X3
J
W3
IT
N1
L2
Port Threads
A
ISO G
C
NPT
Series 8000
032
32mm
040
40mm
050
50mm
063
63mm
080
80mm
100
100mm
125
125mm
Ordering Examples
Magnetic Piston
Standard cylinder
M
Special wiper/seal
W2
Low friction
X2
MU
Additional piston rod, special wiper/seal
W6
Piston rod boot/bellows (gaiter)
MG
Without cushioning
MW
Without cushioning, low friction
X4
JM
Double ended piston rod, special wiper/seal
W4
Four position cylinder
MT
*Non-rotating piston rod (ø32mm to ø100mm)
N2
Passive locking unit
L4
Cylinders
To order a Profile ø100 mm bore magnetic
piston cylinder with a 63 mm stroke specify: PDA/8100/M/63.
Mountings
To order a cap detachable trunnion mounting style FH for ø100 mm bore
cylinder specify: QA/8100/34. (ACT-4-17)
*Requires piston rod material R
ISO 6431/VDMA 24562 Corrosive Resistant Cylinder Series PV/8000
Model Codes
■ P V ■– 8 ■ ■ ■–M– ■ ■ –■
1
2
3
4
5
6 7
8
9
10
Special Optional
Standard (blank)
H
Hydraulic
T
Temperature
11
Option MU
Enter _ _ _ /8 _ _ _ /MU/_ _ /_ _ the
additional piston rod length
Stroke (mm)
3000 maximum
Corrosive Resistant Cylinder
PV Profile tube, chrome plated
300 series stainless steel piston
rod and tie rods, black anodized
solid aluminum end caps,
Delta-MCS coated tie rod nuts.
Options include Magnetic Piston
M
Standard cylinder
W2
Special wiper/seal
MU
W6
Additional piston rod, special wiper/seal
JM
W4
Double ended piston rod, special wiper/seal
MT
Four position cylinder
Port Threads
A
ISO G
C
NPT
Series 8000
Ordering Examples
032
32mm
040
40mm
050
50mm
063
63mm
080
80mm
100
100mm
Cylinders
To order a ø50 mm bore Corrosive Resistant Cylinder with
magnetic piston and a 100 mm stroke specify: PVA/8050/M/100.
Mountings
To order a rear hinge mounting style L for ø40 mm bore cylinder
specify: PVQA/8040/24. (ACT-4-13)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-4-7
Basic Dimensions
WH
L8 + stroke
L2
E
VD
R
G
L12
AM
G
PL
PL
Cushion screw
EE
VA
EE
KW
øMM h 9
øB e 11 KK
AP øBA e 11
RT
BH
SW (Across Flats)
L9
BG
KV (Across Flats)
ø80 to 320 mm
ø80 to 320 mm
BH (Across Flats)
RT
BG
Ø
32
40
50
63
80
100
125
160
200
250
320
AM
0.87 (22)
0.94 (24)
1.26 (32)
1.26 (32)
1.57 (40)
1.57 (40)
2.13 (54)
2.83 (72)
2.83 (72)
3.31 (84)
3.78 (96)
AP
0.14 (3.5)
0.18 (4.5)
0.24 (6)
0.39 (10)
0.33 (8.5)
0.35 (9)
0.39 (10)
0.71 (18)
0.71 (18)
0.89 (22.5)
0.89 (22.5)
Ø
32
40
50
63
80
100
125
160
200
250
320
L12
0.24 (6)
0.26 (6.5)
0.31 (8)
0.31 (8)
0.39 (10)
0.39 (10)
0.51 (13)
0.63 (16)
0.63 (16)
0.79 (20)
0.94 (24)
ØMM h 9
0.47 (12)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
1.26 (32)
1.57 (40)
1.57 (40)
1.97 (50)
2.48 (63)
ACT-4-8
ØB e11
1.18 (30)
1.38 (35)
1.57 (40)
1.77 (45)
1.77 (45)
2.17 (55)
2.36 (60)
2.56 (65)
2.95 (75)
3.54 (90)
4.33 (110)
ØBA e 11
1.18 (30)
1.38 (35)
1.57 (40)
1.77 (45)
1.77 (45)
2.17 (55)
2.36 (60)
2.56 (65)
2.95 (75)
3.54 (90)
4.33 (110)
BG
0.71 (18)
0.71 (18)
0.71 (18)
0.69 (17.5)
0.85 (21.5)
0.85 (21.5)
1.26 (32)
1.12 (28.5)
1.12 (28.5)
1.38 (35)
1.18 (30)
BH
0.24 (6)
0.24 (6)
0.31 (8)
0.31 (8)
0.75 (19)
0.75 (19)
0.94 (24)
1.26 (32)
1.26 (32)
1.42 (36)
1.81 (46)
❑E
1.85 (47)
2.09 (53)
2.56 (65)
2.95 (75)
3.74 (95)
4.53 (115)
5.51 (140)
7.22 (183.5)
8.82 (224)
11.02 (280)
13.78 (350)
G
1.08 (27.5)
1.26 (32)
1.22 (31)
1.30 (33)
1.30 (33)
1.46 (37)
1.81 (46)
1.97 (50)
1.97 (50)
2.28 (58)
2.36 (60)
8000
Weight at
zero stroke
PL
❑R
RT SW
VA
VD
WH
lbs (kg)
0.51 (13) 1.26 (32.5) M 6 0.39 (10) 0.12 (3) 0.24 (6)
1.02 (26) 1.12 (0.51)
0.59 (15) 1.50 (38) M 6 0.51 (13) 0.14 (3.5) 0.24 (6)
1.18 (30) 1.76 (0.80)
0.73 (18.5) 1.83 (46.5) M 8 0.67 (17) 0.14 (3.5) 0.24 (6)
1.46 (37) 2.93 (1.33)
0.75 (19) 2.22 (56.5) M 8 0.67 (17) 0.16 (4) 0.24 (6)
1.46 (37) 3.97 (1.80)
0.75 (19) 2.83 (72) M 10 0.87 (22) 0.16 (4) 0.24 (6)
1.81 (46) 7.17 (3.25)
0.71 (18) 3.50 (89) M 10 0.87 (22) 0.16 (4) 0.24 (6)
2.01 (51) 10.61 (4.81)
0.79 (20) 4.33 (110) M 12 1.06 (27) 0.24 (6) 0.61 (15.5) 2.56 (65) 17.64 (8.00)
0.83 (21) 5.51 (140) M 16 1.42 (36) 0.16 (4) 0.59 (15)
3.15 (80) 32.85 (14.9)
0.83 (21) 6.89 (175) M 16 1.42 (36) 0.20 (5) 0.59 (15)
3.74 (95) 47.85 (21.7)
1.14 (29) 8.66 (220) M 20 1.61 (41) 0.28 (7) 0.51 (13)
4.13 (105) 71.88 (32.6)
1.18 (30) 10.63 (270) M 24 2.17 (55) 0.28 (7) 0.51 (13)
4.72 (120) 131.86 (59.8)
Brookville, OH USA
EE
G 1/8 (1/8"NPT)
G 1/4 (1/4"NPT)
G 1/4 (1/4"NPT)
G 3/8 (3/8"NPT)
G 3/8 (3/8"NPT)
G 1/2 (1/2"NPT)
G 1/2 (1/2"NPT)
G 3/4 (3/4"NPT)
G 3/4 (3/4"NPT)
G 1 (1"NPT)
G 1 (1"NPT)
Phone 937-833-4033
KK
M 10 x 1.25
M 12 x 1.25
M 16 x 1.5
M 16 x 1.5
M 20 x 1.5
M 20 x 1.5
M 27 x 2
M 36 x 2
M 36 x 2
M 42 x 2
M 48 x 2
KV
KW
L2
L8
L9
0.67 (17) 0.20 (5)
0.79 (20) 3.70 (94) 0.16 (4)
0.75 (19) 0.24 (6)
0.87 (22) 4.13 (105) 0.16 (4)
0.94 (24) 0.31 (8)
1.06 (27) 4.17 (106) 0.20 (5)
0.94 (24) 0.31 (8)
1.14 (29) 4.76 (121) 0.20 (5)
1.18 (30) 0.39 (10) 1.30 (33) 5.04 (128) –
1.18 (30) 0.39 (10) 1.42 (36) 5.43 (138) –
1.61 (41) 0.53 (13.5) 1.77 (45) 6.30 (160) –
2.17 (55) 0.71 (18) 2.28 (58) 7.09 (180) –
2.17 (55) 0.71 (18) 2.64 (67) 7.09 (180) –
2.56 (65) 0.83 (21) 3.15 (80) 7.87 (200) –
2.95 (75) 0.94 (24) 3.54 (90) 8.66 (220) –
P/8000
PV/8000
Weight per Weight at
Weight per Weight at
Weight per
25mm In zero stroke 25mm In zero stroke 25mm In
lbs (kg) lbs (kg)
lbs (kg) lbs (kg) lbs (kg)
0.13 (0.06) 1.12 (0.51) 0.13 (0.06) 1.41 (0.64) 0.13 (0.06)
0.18 (0.08) 1.76 (0.80) 0.18 (0.08) 2.09 (0.95) 0.18 (0.08)
0.26 (0.12) 2.93 (1.33) 0.26 (0.12) 3.33 (1.51) 0.26 (0.12)
0.29 (0.13) 3.97 (1.80) 0.29 (0.13) 4.63 (2.10) 0.29 (0.13)
0.44 (0.20) 7.17 (3.25) 0.44 (0.20) 8.27 (3.75) 0.44 (0.20)
0.51 (0.23) 10.61 (4.81) 0.51 (0.23) 12.37 (5.61) 0.51 (0.23)
0.73 (0.33) 17.64 (8.00) 0.73 (0.33) –
–
1.21 (0.55) –
–
–
–
1.32 (0.60) –
–
–
–
2.03 (0.92) –
–
–
–
3.22 (1.46) –
–
–
–
www.norgren.com
8000, 8000/M, P/8000, P/8000/M and PV/8000/M Pneumatic Cylinder Variations
8000J, P/8000J, 8000/JM, P/8000/JM and PV/8000/JM – Cylinders with Double Ended Piston Rod
ZM + 2 x stroke
Cylinder Ø
32
40
50
63
80
100
125
160
200
ZM
5.75 (146)
6.50 (165)
7.09 (180)
7.68 (195)
8.66 (220)
9.45 (240)
11.42 (290)
13.39 (340)
14.57 (370)
L8
3.70 (94)
4.13 (105)
4.17 (106)
4.76 (121)
5.04 (128)
5.43 (138)
6.30 (160)
7.09 (180)
7.09 (180)
L8 + stroke
8000/N1, P/8000/N1 and 8000/N2, P/8000/N2 – Cylinders with Non-rotating Piston Rod
SW 1 (Across Flats)
Cylinder Ø
SW 1
32
0.39 (10)
40
0.51 (13)
50
0.63 (16)
63
0.63 (16)
80
0.83 (21)
100
0.83 (21)
See ACT-4-5 for maximum stroke, length and torque
8000/IT, P/8000/IT and 8000/MT, P/8000/MT – Four-position Cylinders
L10 + stroke 1 + stroke 2
L8 + stroke 1
Cylinder Ø
32
40
50
63
80
100
125
160
200
L8
3.70 (94)
4.13 (105)
4.17 (106)
4.76 (121)
5.04 (128)
5.43 (138)
6.30 (160)
7.09 (180)
7.09 (180)
L10
9.72 (247)
10.94 (278)
11.57 (294)
12.80 (325)
14.06 (357)
15.24 (387)
18.19 (462)
20.87 (530)
22.05 (560)
L11
0.28 (7)
0.31 (8)
0.31 (8)
0.35 (9)
0.35 (9)
0.35 (9)
0.47 (12)
0.39 (10)
0.39 (10)
L11
L8 + stroke 2
Four Position Cylinders are ordered as a complete unit
Examples:
Non-Magnetic Cylinders
8000/IT/Stroke #1/Stroke #2
P/8000/IT/Stroke #1/Stroke #2
Magnetic Cylinders
8000/MT/Stroke #1/Stroke #2
P/8000/MT/Stroke #1/Stroke #2
Four Position Unit with ø80 mm, Stroke #1 = 200 mm, Stroke #2 = 160 mm,
magnetic piston, complete with foot mounting, and reed switches.
4 Position Cylinder
DA/8080/MT/200/160
Qty 1
Foot Mounting
QA/8080/21
Qty 1 Pair
Reed Switch
QM/34/2
Qty 4
Switch Clamps
QM/27/2/1
Qty 4
8000/IU, P/8000/IU and 8000/MU, P/8000/MU – Additional Piston Rod Length
Additional Rod Length (mm)
Order Example:
Additional Rod Length (mm)
*
DA/8000/MU/100/50
Stroke
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-4-9
8000, 8000/M, P/8000 and P/8000/M Pneumatic Cylinder Variations
All Dimensions in inches (mm)
8000/G, P/8000/G and 8000/MG, P/8000/MG – Cylinder with Piston Rod Bellows
B
øA
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
ØA
1.57 (40)
2.48 (63)
2.48 (63)
2.48 (63)
3.15 (80)
3.15 (80)
3.15 (80)
4.57 (116)
4.57 (116)
4.57 (116)
5.63 (143)
Maximum stroke
per bellow
2.36 (60)
5.71 (145)
5.71 (145)
5.71 (145)
9.84 (250)
9.84 (250)
9.84 (250)
13.78 (350)
13.78 (350)
13.78 (350)
19.69 (500)
Piston rod extension B
first bellow
additional bellows
1.18 (30)
0.98 (25)
1.97 (50)
1.26 (32)
1.57 (40)
1.26 (32)
1.57 (40)
1.26 (32)
1.97 (50)
1.77 (45)
1.97 (50)
1.77 (45)
1.97 (50)
1.77 (45)
2.76 (70)
2.36 (60)
2.76 (70)
2.36 (60)
2.76 (70)
2.36 (60)
4.33 (110)
3.94 (100)
Example: To determine B dimension for a
cylinder ø40 mm x 325 mm stroke
Step 1
Calculate the number of bellows that will be required.
To do this, divide 325 mm (cylinder stroke length) by
145 mm (the maximum stroke per bellow) = 2.242 rounded
up to 3. A total of three rod bellows will be required.
Step 2
B dimension (additional piston rod extension required)
with three rod bellows = 50 mm (first rod bellows) + 32 mm
+ 32 mm (two remaining rod bellows): 50 + 32 + 32 = 114.
B dimension = 114 mm.
8000/L2, P/8000/L2 and 8000/L4, P/8000/L4 – Cylinder with Passive Locking Unit
AB
L 8 + stroke
AJ
AO
SW (Across Flats)
EE
AM
øAC
Separate
Locking Cartridge
for Locking Unit
RT
R E1
Cylinder Ø
32
40
50
63
80
100
125
160
200
ø B e11
AN
VD AD
AK
AE
AF
AL
E
WH
AH
Model
QA/8032/63
QA/8040/63
QA/8050/63
QA/8063/63
QA/8100/63
QA/8100/63
QA/8125/63
QA/8100/63
QA/8125/63
*Locking Forces
135 (600)
225 (1000)
337 (1500)
495 (2200)
1124 (5000)
1124 (5000)
1574 (7000)
5000 (1124)
7000 (1574)
AG
Cylinder Ø
32
40
50
63
80
100
125
160
200
AB
1.26 (32)
1.40 (35.5)
1.93 (49)
1.93 (49)
2.44 (62)
2.56 (65)
3.35 (85)
67 (2.64)
83 (3.27)
ØAC
0.39 (10)
0.39 (10)
0.59 (15)
0.59 (15)
0.75 (19)
0.75 (19)
0.75 (19)
19 (0.75)
19 (0.75)
AD
0.47 (12)
0.47 (12)
0.63 (16)
0.59 (15)
0.63 (16)
0.71 (18)
1.06 (27)
20.5 (0.81)
25 (0.98)
AE
0.31 (8)
0.39 (10)
0.59 (15)
0.59 (15)
0.63 (16)
0.63 (16)
0.98 (25)
16 (0.63)
25 (0.98)
AF
1.57 (40)
1.81 (46)
2.13 (54)
2.17 (55)
2.76 (70)
2.76 (70)
3.74 (95)
70 (2.76)
95 (3.74)
AG
0.17 (4.2)
0.18 (4.5)
0.43 (11.5)
0.30 (7.5)
0.39 (10)
0.39 (10)
0.43 (11)
10 (0.39)
11 (0.43)
AH
1.89 (48)
2.17 (55)
2.76 (70)
2.76 (70)
3.54 (90)
3.62 (92)
4.80 (122)
94.5 (3.72)
120 (4.72)
❏ AJ
0.89 (22.5)
1.08 (27.5)
1.28 (32.5)
1.61 (41)
2.15 (54.5)
2.15 (54.5)
2.56 (65)
54.5 (2.15)
65 (2.56)
AK
M5
M5
M6
M8
M8
M8
M 10
M8
M 10
AL
0.63 (16)
0.83 (21)
0.94 (24)
1.26 (32)
1.73 (44)
2.36 (60)
2.95 (75)
60 (2.36)
75 (2.95)
Cylinder Ø
32
40
50
63
80
100
125
160
200
AO
0.16 (4)
0.16 (4)
0.16 (4)
0.16 (4)
0.16 (4)
0.16 (4)
0.16 (4)
4 (0.16)
4 (0.16)
ØB e11
1.18 (30)
1.38 (35)
1.57 (40)
1.77 (45)
1.77 (45)
2.17 (55)
2.36 (60)
55 (2.17)
60 (2.36)
E
1.89 (48)
2.20 (56)
2.68 (68)
3.23 (82)
3.94 (100)
4.72 (120)
5.51 (140)
120 (4.72)
140 (5.51)
E1
1.97 (50)
2.28 (58)
2.76 (70)
3.35 (85)
4.13 (105)
5.12 (130)
5.91 (150)
130 (5.12)
150 (5.91)
EE
M5
M5
G 1/8
G 1/8
G 1/8
G 1/8
G 1/8
G 1/8
G 1/8
L8
3.70 (94)
4.13 (105)
4.17 (106)
4.76 (121)
5.04 (128)
5.43 (138)
6.30 (160)
138 (5.43)
160 (6.30)
❏R
1.28 (32.5)
1.50 (38)
1.83 (46.5)
2.22 (56.5)
2.83 (72)
3.50 (89)
4.33 (110)
89 (3.50)
110 (4.33)
RT
M6
M6
M8
M8
M 10
M 10
M 12
M 10
M 12
SW
0.31 (8)
0.31 (8)
0.51 (13)
0.51 (13)
0.67 (17)
0.67 (17)
0.67 (17)
17 (0.67)
17 (0.67)
VD
WH
Forces*
0.39 (10)
0.63 (16)
135 (600)
0.39 (10)
0.71 (18)
225 (1000)
0.47 (12)
0.87 (22)
337 (1500)
0.47 (12)
0.79 (20)
495 (2200)
0.79 (20)
1.30 (33)
1124 (5000)
0.91 (23)
1.50 (38)
1124 (5000)
1.26 (32)
2.56 (65)
1574 (7000)
20.5 (0.81) *All
35.5
(1.40)
5000
Forces
in Inch
lbs.(1124)
(Newtons)
32 (1.26)
52 (2.05)
7000 (1574)
ACT-4-10
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
AM
2.78 (70.5)
2.93 (74.5)
3.60 (91.5)
4.27 (108.5)
5.57 (141.5)
5.57 (141.5)
5.98 (152)
142 (5.59)
152 (5.98)
AN
0.31 (8)
0.39 (10)
0.47 (12)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
16 (0.63)
20 (0.79)
8000, 8000/M, P/8000, P/8000/M and PV/8000/M Pneumatic Cylinder Mounts
8000/35 – Front or Rear Stud Mounting Style A
(Corresponds to DIN ISO 6431, Style MX1)
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
ZT + stroke
WH
TG
8000, P/8000
QM/8032/35
QM/8032/35
QM/8050/35
QM/8050/35
QM/8080/35
QM/8080/35
QM/8125/35
QM/8160/35
QM/8160/35
QM/8250/35
QM/8320/35
DD
TG
8000/22 – Front Flange Mounting Style G
8000/22 – Rear Flange Mounting Style B
(Corresponds to DIN ISO 6431 and VDMA 24562 Part 2, Style MF2)
(Corresponds to DIN ISO 6431 and VDMA 24562 Part 2, Style MF1)
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
8000, P/8000
QA/8032/22
QA/8040/22
QA/8050/22
QA/8063/22
QA/8080/22
QA/8100/22
QM/8125/22
QM/8160/22
QM/8200/22
QM/8250/22
QM/8320/22
BB
UF
PV/8000
PVQA/8032/22
PVQA/8040/22
PVQA/8050/22
PVQA/8063/22
PVQA/8080/22
PVQA/8100/22
TF
ZF + stroke
W
øFB
MF
MF
E1 R
8000/21 – Foot Mounting Style C
XA + stroke
(Corresponds to DIN ISO 6431 and VDMA 24562 Part 2, Style MS1)
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
8000, P/8000
QA/8032/21
QA/8040/21
QA/8050/21
QA/8063/21
QA/8080/21
QA/8100/21
QM/8125/21
QM/8160/21
QM/8200/21
QM/8250/21
QM/8320/21
PV/8000
PVQA/8032/21
PVQA/8040/21
PVQA/8050/21
PVQA/8063/21
PVQA/8080/21
PVQA/8100/21
AH
AT
AU
øAB
AO
SA + stroke
TR
E
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
ØAB
0.28 (7)
0.35 (9)
0.35 (9)
0.35 (9)
0.47 (12)
0.55 (14)
0.63 (16)
0.71 (18)
0.87 (22)
1.02 (26)
1.30 (33)
AH
1.26 (32)
1.42 (36)
1.77 (45)
1.97 (50)
2.48 (63)
2.80 (71)
3.54 (90)
4.53 (115)
5.31 (135)
6.50 (165)
7.87 (200)
AO
0.31 (8)
0.35 (9)
0.39 (10)
0.47 (12)
0.75 (19)
0.75 (19)
0.79 (20)
0.79 (20)
1.18 (30)
1.38 (35)
1.77 (45)
AT
0.16 (4)
0.16 (4)
0.20 (5)
0.20 (5)
0.20 (5)
0.20 (5)
0.35 (9)
0.31 (8)
0.35 (9)
0.39 (10)
0.63 (16)
AU
0.94 (24)
1.10 (28)
1.26 (32)
1.26 (32)
1.61 (41)
1.61 (41)
1.77 (45)
2.36 (60)
2.76 (70)
2.95 (75)
3.35 (85)
BB
0.67 (17)
0.67 (17)
0.91 (23)
0.91 (23)
1.10 (28)
1.10 (28)
1.34 (34)
1.65 (42)
1.65 (42)
1.97 (50)
2.36 (60)
DD
M6
M6
M8
M8
M 10
M 10
M 12
M 16
M 16
M 20
M 24
E
1.89 (48)
2.09 (53)
2.52 (64)
2.91 (74)
3.86 (98)
4.53 (115)
5.51 (140)
7.09 (180)
8.66 (220)
11.02 (280)
13.78 (350)
E1
1.97 (50)
2.17 (55)
2.56 (65)
2.95 (75)
3.94 (100)
4.72 (120)
5.51 (140)
7.09 (180)
8.66 (220)
11.02 (280)
13.78 (350)
ØFB
0.28 (7)
0.35 (9)
0.35 (9)
0.35 (9)
0.47 (12)
0.55 (14)
0.63 (16)
0.71 (18)
0.87 (22)
1.02 (26)
1.30 (33)
MF
0.39 (10)
0.39 (10)
0.47 (12)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
1.18 (30)
R
1.26 (32)
1.42 (36)
1.77 (45)
1.97 (50)
2.48 (63)
2.95 (75)
3.54 (90)
4.53 (115)
5.31 (135)
6.50 (165)
7.87 (200)
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
TF
2.52 (64)
2.83 (72)
3.54 (90)
3.94 (100)
4.96 (126)
5.91 (150)
7.09 (180)
9.06 (230)
10.63 (270)
12.99 (330)
15.75 (400)
❏ TG
1.28 (32.5)
1.50 (38)
1.83 (46.5)
2.22 (56.5)
2.83 (72)
3.50 (89)
4.33 (110)
5.51 (140)
6.89 (175)
8.66 (220)
10.63 (270)
TR
1.26 (32)
1.42 (36)
1.77 (45)
1.97 (50)
2.48 (63)
2.95 (75)
3.54 (90)
4.53 (115)
5.31 (135)
6.50 (165)
7.87 (200)
UF
3.15 (80)
3.54 (90)
4.33 (110)
4.92 (125)
6.06 (154)
7.32 (186)
8.82 (224)
11.02 (280)
12.60 (320)
15.55 (395)
18.70 (475)
W
0.63 (16)
0.79 (20)
0.98 (25)
0.98 (25)
1.18 (30)
1.38 (35)
1.77 (45)
2.36 (60)
2.76 (70)
3.15 (80)
3.54 (90)
WH
1.02 (26)
1.18 (30)
1.46 (37)
1.46 (37)
1.81 (46)
2.01 (51)
2.56 (65)
3.15 (80)
3.74 (95)
4.13 (105)
4.72 (120)
XA
5.67 (144)
6.42 (163)
6.89 (175)
7.48 (190)
8.46 (215)
9.06 (230)
10.63 (270)
12.60 (320)
13.58 (345)
14.96 (380)
16.73 (425)
ZF
5.12 (130)
5.71 (145)
6.10 (155)
6.69 (170)
7.48 (190)
8.07 (205)
9.65 (245)
11.02 (280)
11.81 (300)
12.99 (330)
14.57 (370)
ZT
5.39 (137)
5.98 (152)
6.54 (166)
7.13 (181)
7.95 (202)
8.54 (217)
10.20 (259)
11.89 (302)
12.48 (317)
13.98 (355)
15.75 (400)
Style A*
0.04 (0.02)
0.04 (0.02)
0.11 (0.05)
0.11 (0.05)
0.18 (0.08)
0.18 (0.08)
0.31 (0.14)
0.68 (0.31)
0.68 (0.31)
2.03 (0.92)
3.22 (1.46)
StyleB, G*
0.55 (0.25)
0.77 (0.35)
1.54 (0.70)
1.76 (0.80)
2.98 (1.35)
4.85 (2.20)
3.75 (1.70)
6.84 (3.10)
10.14 (4.60)
16.32 (7.40)
29.99 (13.6)
Style C*
0.33 (0.15)
0.40 (0.18)
0.66 (0.30)
0.86 (0.39)
1.76 (0.80)
2.09 (0.95)
5.29 (2.40)
7.72 (3.50)
11.58 (5.25)
20.95 (9.50)
48.51 (22.0)
SA
5.59 (142)
6.34 (161)
6.69 (170)
7.28 (185)
8.27 (210)
8.66 (220)
9.84 (250)
11.81 (300)
12.60 (320)
13.78 (350)
15.35 (390)
*All Weights in Pounds (Kilograms)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-4-11
8000/25 – Piston Rod Clevis Mounting Style F
(Corresponds to DIN ISO 8140)
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
8000, P/8000
QM/8025/25
QM/8040/25
QM/8050/25
QM/8050/25
QM/8080/25
QM/8080/25
QM/8125/25
QM/8160/25
QM/8160/25
QM/8250/25
QM/8320/25
RK
PV/8000
PVQM/8032/25
PVQM/8040/25
PVQM/8050/25
PVQM/8050/25
PVQM/8080/25
PVQM/8080/25
CL
CM
CE
LE
øCK h 11
ER
KK
8000/26 – Front Hinge Mounting Style M
Cylinder Ø
32
40
50
63
80
100
125
160
200
8000, P/8000
QM/8032/26
QM/8040/26
QM/8050/26
QM/8063/26
QM/8080/26
QM/8100/26
QM/8125/26
QM/8160/26
QM/8200/26
PV/8000
PVQM/8032/26
PVQM/8040/26
PVQM/8050/26
PVQM/8063/26
PVQM/8080/26
PVQM/8100/26
RK
G1
CE
øD
CA
H2
K1
øS
L1
K2
G2
G3
M/P199 . . – Hinge Bracket Style SS
G1
(For Piston Rod Clevis Mounting Style F)
Cylinder Ø
32
40
50
63
80
100
125
160
200
8000, P/8000
M/P19931
M/P19932
M/P19933
M/P19934
M/P19935
M/P19936
M/P19937
M/P19938
M/P19939
EM
R
PV/8000
M/P40465
M/P40466
M/P40467
M/P40468
M/P40469
M/P40470
øCN G 7
øD
CA
L1
H2
G2
øS
G3
K1
K2
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
CA
1.26 (32)
1.42 (36)
1.77 (45)
1.97 (50)
2.48 (63)
2.80 (71)
3.54 (90)
4.53 (115)
5.31 (135)
—
—
CE
1.57 (40)
1.89 (48)
2.52 (64)
2.52 (64)
3.15 (80)
3.15 (80)
4.33 (110)
5.67 (144)
5.67 (144)
6.61 (168)
7.56 (192)
ØCK h11
0.39 (10)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
1.18 (30)
1.38 (35)
1.38 (35)
1.57 (40)
1.97 (50)
❏ CL
0.79 (20)
0.94 (24)
1.26 (32)
1.26 (32)
1.57 (40)
1.57 (40)
2.17 (55)
2.76 (70)
2.76 (70)
3.35 (85)
3.78 (96)
CM
0.39 (10)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
1.18 (30)
1.38 (35)
1.38 (35)
1.57 (40)
1.97 (50)
ØCN G7
0.39 (10)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
1.18 (30)
1.38 (35)
1.38 (35)
—
—
ØD
0.43 (11)
0.43 (11)
0.59 (15)
0.59 (15)
0.71 (18)
0.71 (18)
0.79 (20)
0.79 (20)
0.94 (24)
—
—
EM
0.39 (10)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
1.18 (30)
1.38 (35)
1.38 (35)
—
—
ER
0.63 (16)
0.75 (19)
0.98 (25)
0.98 (25)
1.26 (32)
1.26 (32)
1.77 (45)
2.24 (57)
2.24 (57)
2.68 (68)
3.35 (85)
G1
0.83 (21)
0.94 (24)
1.30 (33)
1.46 (37)
1.85 (47)
2.17 (55)
2.76 (70)
3.82 (97)
4.13 (105)
—
—
G2
0.71 (18)
0.87 (22)
1.18 (30)
1.38 (35)
1.57 (40)
1.97 (50)
2.36 (60)
3.46 (88)
3.54 (90)
—
—
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
H2
0.31 (8)
0.39 (10)
0.47 (12)
0.47 (12)
0.55 (14)
0.59 (15)
0.79 (20)
0.98 (25)
1.18 (30)
—
—
KK
M10 x1.25
M12x1.25
M16 x1.5
M16 x1.5
M20 x1.5
M20 x1.5
M27 x2
M36 x2
M36 x2
M42x2
M48x2
K1
1.50 (38)
1.61 (41)
1.97 (50)
2.05 (52)
2.60 (66)
2.99 (76)
3.70 (94)
4.65 (118)
4.80 (122)
—
—
K2
2.01 (51)
2.13 (54)
2.56 (65)
2.64 (67)
3.39 (86)
3.78 (96)
4.88 (124)
6.14 (156)
6.38 (162)
—
—
L1
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.10 (2.5)
0.10 (2.5)
0.13 (3.2)
0.16 (4)
0.16 (4)
—
—
LE
0.79 (20)
0.94 (24)
1.26 (32)
1.26 (32)
1.57 (40)
1.57 (40)
2.13 (54)
2.83 (72)
2.83 (72)
3.31 (84)
3.78 (96)
R
0.39 (10)
0.43 (11)
0.51 (13)
0.59 (15)
0.59 (15)
0.75 (19)
0.87 (22)
1.22 (31)
1.22 (31)
—
—
RK
1.10 (28)
1.26 (32)
1.63 (41.5)
1.63 (41.5)
1.97 (50)
1.97 (50)
2.44 (62)
3.74 (95)
3.74 (95)
4.17 (106)
4.76 (121)
ØS
0.26 (6.6)
0.26 (6.6)
0.35 (9)
0.35 (9)
0.43 (11)
0.43 (11)
0.55 (14)
0.55 (14)
0.71 (18)
—
—
Style F*
0.20 (0.09)
0.29 (0.13)
0.73 (0.33)
0.73 (0.33)
1.48 (0.67)
1.48 (0.67)
2.98 (1.35)
6.62 (3.00)
6.62 (3.00)
14.11 (6.40)
19.18 (8.70)
Style M*
Style SS*
0.53 (0.24) 0.33 (0.15)
0.73 (0.33) 0.44 (0.20)
1.79 (0.81) 1.06 (0.48)
1.83 (0.83) 1.10 (0.50)
3.13 (1.42) 1.65 (0.75)
4.12 (1.87) 2.65 (1.20)
8.49 (3.85) 5.51 (2.50)
19.85 (9.00) 13.23 (6.00)
23.37 (10.60) 16.76 (7.60)
—
—
—
—
G3
1.22 (31)
1.38 (35)
1.77 (45)
1.97 (50)
2.36 (60)
2.76 (70)
3.54 (90)
4.96 (126)
5.12 (130)
—
—
ACT-4-12
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
8000/23 – Rear Clevis Mounting Style D
(Corresponds to DIN ISO 6431 and VDMA 24562 Part 2, Style MP2)
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
8000, P/8000
QA/8032/23
QA/8040/23
QA/8050/23
QA/8063/23
QA/8080/23
QA/8100/23
QM/8125/23
QM/8160/23
QM/8200/23
QM/8250/23
QM/8320/23
LH
XD + stroke
PV/8000
PVQA/8032/23
PVQA/8040/23
PVQA/8050/23
PVQA/8063/23
PVQA/8080/23
PVQA/8100/23
EK f 8
MR
XD + stroke
(Corresponds to VDMA 24562 Part 2)
8000, P/8000
QA/8032/24
QA/8040/24
QA/8050/24
QA/8063/24
QA/8080/24
QA/8100/24
QM/8125/24
QM/8160/24
QM/8200/24
QM/8250/24
QM/8320/24
FL
øD
CA
H2
K1
L1
øS
(For Rear Clevis Mounting Style D)
(Corresponds to VDMA 24562, Part 2)
8000, P/8000
M/P19493
M/P19494
M/P19495
M/P19496
M/P19497
M/P19498
M/P19499
M/P19679
M/P19683
M/P19446
M/P19447
G1
PV/8000
PVQA/8032/24
PVQA/8040/24
PVQA/8050/24
PVQA/8063/24
PVQA/8080/24
PVQA/8100/24
M/P19 . . . or M/P40 . . . – Hinge Bracket Style SW
Cylinder Ø
32
40
50
63
80
100
125
160
160
160
200
CB H 14
L
8000/24 – Rear Hinge Mounting Style L
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
UB
FL
G2
K2
G3
LH
EM
G1
R
PV/8000
M/P40459
M/P40460
M/P40461
M/P40462
M/P40463
M/P40464
øCK H 9
øD
L1
CA
H2
øS
G2
K1
G3
K2
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
CA
1.26 (32)
1.42 (36)
1.77 (45)
1.97 (50)
2.48 (63)
2.80 (71)
3.54 (90)
4.53 (115)
5.31 (135)
6.50 (165)
7.87 (200)
CB H14
1.02 (26)
1.10 (28)
1.26 (32)
1.57 (40)
1.97 (50)
2.36 (60)
2.76 (70)
3.54 (90)
3.54 (90)
4.33 (110)
4.72 (120)
ØCK H9
0.39 (10)
0.47 (12)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.98 (25)
1.18 (30)
1.18 (30)
1.57 (40)
1.77 (45)
ØD
0.43 (11)
0.43 (11)
0.59 (15)
0.59 (15)
0.71 (18)
0.71 (18)
0.79 (20)
0.79 (20)
0.94 (24)
1.30 (33)
1.57 (40)
∆EK f8
0.39 (10)
0.47 (12)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.98 (25)
1.18 (30)
1.18 (30)
1.57 (40)
1.77 (45)
EM
1.02 (26)
1.10 (28)
1.26 (32)
1.57 (40)
1.97 (50)
2.36 (60)
2.76 (70)
3.54 (90)
3.54 (90)
4.33 (110)
4.72 (120)
FL
0.87 (22)
0.98 (25)
1.06 (27)
1.26 (32)
1.42 (36)
1.61 (41)
1.97 (50)
2.17 (55)
2.36 (60)
2.76 (70)
3.15 (80)
G1
0.83 (21)
0.94 (24)
1.30 (33)
1.46 (37)
1.85 (47)
2.17 (55)
2.76 (70)
3.82 (97)
4.13 (105)
5.04 (128)
5.91 (150)
G2
0.71 (18)
0.87 (22)
1.18 (30)
1.38 (35)
1.57 (40)
1.97 (50)
2.36 (60)
3.46 (88)
3.54 (90)
4.33 (110)
4.80 (122)
G3
1.22 (31)
1.38 (35)
1.77 (45)
1.97 (50)
2.36 (60)
2.76 (70)
3.54 (90)
4.96 (126)
5.12 (130)
6.30 (160)
7.32 (186)
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
K2
2.01 (51)
2.13 (54)
2.56 (65)
2.64 (67)
3.39 (86)
3.78 (96)
4.88 (124)
6.14 (156)
6.38 (162)
7.87 (200)
9.21 (234)
L
0.51 (13)
0.63 (16)
0.67 (17)
0.87 (22)
0.87 (22)
1.06 (27)
1.22 (31)
1.40 (35.5)
1.41 (36)
1.77 (45)
1.97 (50)
L1
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.10 (2.5)
0.10 (2.5)
0.13 (3.2)
0.16 (4)
0.16 (4)
0.08 (2)
0.08 (2)
LH
2.05 (52)
2.36 (60)
2.68 (68)
3.11 (79)
3.90 (99)
4.69 (119)
5.47 (139)
7.13 (181)
7.13 (181)
8.60 (218)
9.37 (238)
MR
0.35 (9)
0.47 (12)
0.47 (12)
0.59 (15)
0.59 (15)
0.79 (20)
0.98 (25)
1.18 (30)
1.18 (30)
1.57 (40)
1.77 (45)
R
0.39 (10)
0.43 (11)
0.51 (13)
0.59 (15)
0.59 (15)
0.75 (19)
0.87 (22)
1.22 (31)
1.22 (31)
1.57 (40)
1.77 (45)
ØS
0.26 (6.6)
0.26 (6.6)
0.35 (9)
0.35 (9)
0.43 (11)
0.43 (11)
0.55 (14)
0.55 (14)
0.71 (18)
0.87 (22)
1.02 (26)
UB
1.77 (45)
2.05 (52)
2.36 (60)
2.76 (70)
3.54 (90)
4.33 (110)
5.12 (130)
6.69 (170)
6.69 (170)
7.87 (200)
8.66 (220)
XD
5.59 (142)
6.30 (160)
6.69 (170)
7.48 (190)
8.27 (210)
9.06 (230)
10.83 (275)
12.40 (315)
13.19 (335)
14.76 (375)
16.54 (420)
Style D*
Style L*
Style SW*
0.24 (0.11) 0.35 (0.16) 0.11 (0.05)
0.35 (0.16) 0.51 (0.23) 0.15 (0.07)
0.49 (0.22) 0.79 (0.36) 0.31 (0.14)
0.75 (0.34) 1.15 (0.52) 0.40 (0.18)
1.19 (0.54) 1.81 (0.82) 0.62 (0.28)
1.98 (0.90) 2.91 (1.32) 0.93 (0.42)
5.95 (2.70) 11.91 (5.40) 5.95 (2.70)
9.48 (4.30) 23.37 (10.6) 13.89 (6.30)
13.45 (6.10) 31.09 (14.1) 17.64 (8.00)
41.90 (19.0) 71.44 (32.4) 29.55 (13.4)
67.25 (30.5) 115.76 (52.5) 48.51 (22.0)
Brookville, OH USA
Phone 937-833-4033
H2
0.31 (8)
0.39 (10)
0.47 (12)
0.47 (12)
0.55 (14)
0.59 (15)
0.79 (20)
0.98 (25)
1.18 (30)
1.38 (35)
1.57 (40)
www.norgren.com
K1
1.50 (38)
1.61 (41)
1.97 (50)
2.05 (52)
2.60 (66)
3.00 (76)
3.70 (94)
4.65 (118)
4.80 (122)
5.91 (150)
6.69 (170)
ACT-4-13
8000, 8000/M, P/8000 and P/8000/M Pneumatic Cylinder Mounts
8000/42 – Rear Clevis Mounting Style D2
Cylinder Ø
32
40
50
63
80
100
125
160
200
B2
XD + stroke
B1 H 14
FL
8000, P/8000
QA/8032/42
QA/8040/42
QA/8050/42
QA/8063/42
QA/8080/42
QA/8100/42
QA/8125/42
QA/8160/42
QA/8200/42
R1
B3
EK1 h 9
R2
8000/43 – Universal Rear Hinge Mounting Style UL
Cylinder Ø
32
40
50
63
80
100
125
160
200
XD + stroke
8000, P/8000
QA/8032/43
QA/8040/43
QA/8050/43
QA/8063/43
QA/8080/43
QA/8100/43
QA/8125/43
QA/8160/43
QA/8200/43
FL
G1
øD
CH
H2
øS
K1
L1
G2
K2
G3
EN -0.1
M/P . . . . . – Hinge Bracket Style US
EU
(For Rear Clevis Mounting Style D2)
Cylinder Ø
32
40
50
63
80
100
125
160
200
G1
ER
8000, P/8000
M/P40310
M/P40311
M/P40312
M/P40313
M/P40314
M/P40315
M/P71355
M/P71356
M/P71357
Z
øCN H 7
Z
øD
CH
H2
L1
G2
øS
K1
G3
K2
Cylinder Ø
32
40
50
63
80
100
125
160
200
B1 H14
0.55 (14)
0.63 (16)
0.83 (21)
0.83 (21)
0.98 (25)
0.98 (25)
1.46 (37)
1.69 (43)
1.69 (43)
B2
1.34 (34)
1.57 (40)
1.77 (45)
2.01 (51)
2.56 (65)
2.95 (75)
3.82 (97)
4.80 (122)
4.80 (122)
B3
0.13 (3.3)
0.17 (4.3)
0.17 (4.3)
0.17 (4.3)
0.17 (4.3)
0.17 (4.3)
0.25 (6.3)
0.25 (6.3)
0.25 (6.3)
CH
1.26 (32)
1.42 (36)
1.77 (45)
1.97 (50)
2.48 (63)
2.80 (71)
3.54 (90)
4.53 (115)
5.31 (135)
ØCN H7
0.39 (10)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
1.18 (30)
1.38 (35)
1.38 (35)
ØD
0.43 (11)
0.43 (11)
0.59 (15)
0.59 (15)
0.71 (18)
0.71 (18)
0.79 (20)
0.79 (20)
0.94 (24)
ØEKH9
0.39 (10)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
1.18 (30)
1.38 (35)
1.38 (35)
EN -0.1
0.55 (14)
0.63 (16)
0.83 (21)
0.83 (21)
0.98 (25)
0.98 (25)
1.46 (37)
1.69 (43)
1.69 (43)
ER
0.63 (16)
0.75 (19)
0.83 (21)
0.94 (24)
1.10 (28)
1.18 (30)
1.57 (40)
1.73 (44)
1.89 (48)
EU
0.41 (10.5)
0.47 (12)
0.59 (15)
0.59 (15)
0.71 (18)
0.71 (18)
0.98 (25)
1.10 (28)
1.10 (28)
Cylinder Ø
32
40
50
63
80
100
125
160
200
G3
1.22 (31)
1.38 (35)
1.77 (45)
1.97 (50)
2.36 (60)
2.76 (70)
3.54 (90)
4.96 (126)
5.12 (130)
H2
0.31 (8)
0.39 (10)
0.47 (12)
0.47 (12)
0.55 (14)
0.59 (15)
0.79 (20)
0.98 (25)
1.18 (30)
K1
1.50 (38)
1.61 (41)
1.97 (50)
2.05 (52)
2.60 (66)
2.99 (76)
3.70 (94)
4.65 (118)
4.80 (122)
K2
2.01 (51)
2.13 (54)
2.56 (65)
2.64 (67)
3.39 (86)
3.78 (96)
4.88 (124)
6.14 (156)
6.38 (162)
L1
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.10 (2.5)
0.10 (2.5)
0.13 (3.2)
0.16 (4)
0.16 (4)
R1
0.43 (11)
0.47 (12)
0.57 (14.5)
0.71 (18)
0.87 (22)
0.87 (22)
1.18 (30)
1.42 (36)
1.50 (38)
R2
0.67 (17)
0.79 (20)
0.87 (22)
0.98 (25)
1.18 (30)
1.26 (32)
1.65 (42)
1.81 (46)
1.93 (49)
ØS
0.26 (6.6)
0.26 (6.6)
0.35 (9)
0.35 (9)
0.43 (11)
0.43 (11)
0.55 (14)
0.55 (14)
0.71 (18)
XD
5.59 (142)
6.30 (160)
6.69 (170)
7.48 (190)
8.27 (210)
9.06 (230)
10.83 (275)
12.40 (315)
13.19 (335)
Style D2*
Style UL*
Style US*
0.44 (0.20)
0.86 (0.39)
0.42 (0.19)
0.51 (0.23)
1.04 (0.47)
0.53 (0.24)
0.79 (0.36)
1.80 (0.82)
1.01 (0.46)
1.21 (0.55)
2.51 (1.14)
1.30 (0.59)
1.98 (0.90)
4.26 (1.93)
2.27 (1.03)
3.20 (1.45)
6.28 (2.85)
3.09 (1.40)
5.95 (2.70)
12.79 (5.80) 6.84 (3.10)
9.48 (4.30)
23.59 (10.70) 14.11 (6.40)
13.45 (6.10) 33.52 (15.20) 20.07 (9.10)
ACT-4-14
Brookville, OH USA
Phone 937-833-4033
FL
0.87 (22)
0.98 (25)
1.06 (27)
1.26 (32)
1.42 (36)
1.61 (41)
1.97 (50)
2.17 (55)
2.36 (60)
www.norgren.com
G1
0.83 (21)
0.94 (24)
1.30 (33)
1.46 (37)
1.85 (47)
2.17 (55)
2.76 (70)
3.82 (97)
4.13 (105)
G2
0.71 (18)
0.87 (22)
1.18 (30)
1.38 (35)
1.57 (40)
1.97 (50)
2.36 (60)
3.46 (88)
3.54 (90)
8000/27 – Rear Eye Mounting Style R
(Corresponds to DIN ISO 6431 and VDMA 24562 Part 2, Style MP4)
Cylinder Ø
32
40
50
63
80
100
125
160
200
8000, P/8000
QA/8032/27
QA/8040/27
QA/8050/27
QA/8063/27
QA/8080/27
QA/8100/27
QM/8125/27
QM/8160/27
QM/8200/27
PV8000
PVQA/8032/27
PVQA/8040/27
PVQA/8050/27
PVQA/8063/27
PVQA/8080/27
PVQA/8100/27
XD + stroke
FL
EW
L1
øCD H 9
MR
8000/33 – Universal Rear Eye Mounting Style UR
Cylinder Ø
32
40
50
63
80
100
125
160
200
8000, P/8000
QA/8032/33
QA/8040/33
QA/8050/33
QA/8063/33
QA/8080/33
QA/8100/33
QM/8125/33
QM/8160/33
QM/8200/33
PV/8000
PVQA/8032/33
PVQA/8040/33
PVQA/8050/33
PVQA/8063/33
PVQA/8080/33
PVQA/8100/33
XD + stroke
EN
FL
Z
øCN H 7
Z
ER
R
Cylinder Ø
32
40
50
63
80
100
125
160
200
ØCD H9
0.39 (10)
0.47 (12)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.98 (25)
1.18 (30)
1.18 (30)
ØCN H7
0.39 (10)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
1.18 (30)
1.38 (35)
1.38 (35)
EN
0.55 (14)
0.63 (16)
0.83 (21)
0.83 (21)
0.98 (25)
0.98 (25)
1.46 (37)
1.69 (43)
1.69 (43)
ER
0.63 (16)
0.75 (19)
0.83 (21)
0.94 (24)
1.10 (28)
1.18 (30)
1.57 (40)
1.73 (44)
1.89 (48)
EW
1.02 (25.8)
1.09 (27.8)
1.25 (31.7)
1.56 (39.7)
1.96 (49.7)
2.35 (59.7)
2.74 (69.7)
3.53 (89.7)
3.53 (89.7)
FL
0.87 (22)
0.98 (25)
1.06 (27)
1.26 (32)
1.42 (36)
1.61 (41)
1.97 (50)
2.17 (55)
2.36 (60)
Brookville, OH USA
L1
0.51 (13)
0.63 (16)
0.67 (17)
0.87 (22)
0.87 (22)
1.06 (27)
1.30 (33)
1.40 (35.5)
1.46 (37)
MR
0.35 (9)
0.47 (12)
0.47 (12)
0.59 (15)
0.59 (15)
0.79 (20)
0.98 (25)
1.18 (30)
1.18 (30)
R
0.57 (14.5)
0.71 (18)
0.75 (19)
0.94 (24)
0.94 (24)
1.14 (29)
1.42 (36)
1.61 (41)
1.65 (42)
Phone 937-833-4033
XD
5.59 (142)
6.30 (160)
6.69 (170)
7.48 (190)
8.27 (210)
9.06 (230)
10.83 (275)
12.40 (315)
13.19 (335)
Z
13°
13°
13°
15°
15°
15°
15°
16°
16°
Style R*
Style UR*
0.20 (0.09) 0.37 (0.17)
0.24 (0.11) 0.55 (0.25)
0.37 (0.17) 0.88 (0.40)
0.53 (0.24) 1.21 (0.55)
0.82 (0.37) 1.98 (0.90)
1.30 (0.59) 3.31 (1.50)
7.06 (3.20) 5.95 (2.70)
13.45 (6.10) 10.14 (4.60)
14.99 (6.80) 16.10 (7.30)
www.norgren.com
ACT-4-15
8000/28 – Central Trunnion Mounting Style H for 8000 (Fixed Location)
(Corresponds to DIN ISO 6431 and VDMA 24562 Part 2, Style MT4)
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
Grease nipple
8000
QA/8032/28
QA/8040/28
QA/8050/28
QA/8063/28
QA/8080/28
QA/8100/28
QM/8125/28
QM/8160/28
QM/8200/28
QM/8250/28
QM/8320/28
R
øTD e 9
UW
TL
TM h 14
L
Must Specify
XV
NOTE: Style H is non-adjustable and permanently fixed into position
per the customer’s required XV, therefore dimension XV must be specified.
Grease nipple supplied as standard on cylinders ø125 mm to ø320 mm bore.
8000/40 – Adjustable lntermediate Trunnion Mounting Style UH for 8000
Cylinder Ø
32
40
50
63
80
100
125
160
200
Grease nipple
8000
QA/8032/40
QA/8040/40
QA/8050/40
QA/8063/40
QA/8080/40
QA/8100/40
QA/8125/40
QA/8160/40
QA/8200/40
R
øTD e 9
UW
TL
TM h 14
L
Please Specify
XV
NOTE: Style UH: Locking screws which secure the mounting to the tie rod must be tightened to the
torque figures shown in the table below. For maximum energy input, consult Technical Services.
Grease nipple supplied as standard on cylinders ø125 mm to ø200 mm bore. Unless otherwise
specified, units will be supplied with adjustable trunnion centered between end covers.
PQA/8000/40 – Adjustable lntermediate Trunnion Mounting Style UH for P/8000
Cylinder Ø
32
40
50
63
80
100
125
P/8000
PQA/8032/40
PQA/8040/40
PQA/8050/40
PQA/8063/40
PQA/8080/40
PQA/8100/40
PQA/8125/40
R
øTD e 9
UW
TL
TM h 14
Please Specify
XV
NOTE: Style UH: Locking screws which secure the mounting to the tie rod must be tightened
to the torque figures shown in the table below. For maximum energy input, consult
Technical Services.
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
L
0.79 (20)
0.94 (24)
1.10 (28)
1.10 (28)
1.10 (28)
1.50 (38)
1.97 (50)
1.97 (50)
1.97 (50)
2.36 (60)
2.76 (70)
ACT-4-16
R
0.04 (1)
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.08 (2)
0.08 (2)
0.10 (2.5)
0.10 (2.5)
0.13 (3.2)
0.13 (3.2)
ØTD e9
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
1.26 (32)
1.26 (32)
1.57 (40)
1.97 (50)
TL
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
1.26 (32)
1.26 (32)
1.57 (40)
1.97 (50)
TM h14
1.97 (50)
2.48 (63)
2.95 (75)
3.54 (90)
4.33 (110)
5.20 (132)
6.30 (160)
7.87 (200)
9.84 (250)
12.60 (320)
15.75 (400)
Brookville, OH USA
UW
1.97 (50)
2.28 (58)
2.76 (70)
3.15 (80)
3.94 (100)
4.96 (126)
5.98 (152)
7.56 (192)
9.45 (240)
12.52 (318)
15.75 (400)
XV min.
2.50 (63.5)
2.91 (74)
3.23 (82)
3.31 (84)
3.66 (93)
4.21 (107)
5.35 (136)
6.10 (155)
6.69 (170)
7.60 (193)
8.46 (215)
XV max.
3.25 (82.5)
3.58 (91)
3.86 (98)
4.37 (111)
5.00 (127)
5.24 (133)
6.06 (154)
7.28 (185)
7.87 (200)
8.54 (217)
9.65 (245)
Phone 937-833-4033
Torque Nm (In lbs)
4.4 (6)
4.4 (6)
7.4 (10)
7.4 (10)
11.1 (15)
11.1 (15)
18.4 (25)
29.5 (40)
29.5 (40)
—
—
L
Locking screw
Style H*
Style UH*
Style UH (P)*
0.35 (0.16)
0.35 (0.16)
0.35 (0.16)
0.77 (0.35)
0.77 (0.35)
0.77 (0.35)
1.43 (0.65)
1.43 (0.65)
1.43 (0.65)
1.87 (0.85)
1.87 (0.85)
1.87 (0.85)
2.65 (1.20)
2.65 (1.20)
2.65 (1.20)
5.07 (2.30)
5.07 (2.30)
5.07 (2.30)
7.28 (3.30)
7.28 (3.30)
7.28 (3.30)
11.69 (5.30) 11.69 (5.30) —
20.73 (9.40) 20.73 (9.40) —
39.69 (18.0) —
—
66.15 (30.0) —
—
www.norgren.com
8000/34 – Head Detachable Trunnion Mounting Style FH
(Corresponds to VDMA 24562 Part 2, Style MT 5/6)
Cylinder Ø
32
40
50
63
80
100
125
L1
8000, P/8000
QA/8032/34
QA/8040/34
QA/8050/34
QA/8063/34
QA/8080/34
QA/8100/34
QA/8125/34
R
øTD e 9
UW 1
D H11
TL
XH
L3
TM h 14
8000/34 – Cap Detachable Trunnion Mounting Style FH
(Corresponds to VDMA 24562 Part 2, Style MT 5/6)
L1
Cylinder Ø
32
40
50
63
80
100
125
8000, P/8000
QA/8032/34
QA/8040/34
QA/8050/34
QA/8063/34
QA/8080/34
QA/8100/34
QA/8125/34
R
øTD e 9
UW 1
L3
TL
TM h 14
XL + stroke
8000/41 – Swivel Bearing Style S
øD 3
For Trunnion Mountings Style H, FH, UH
Cylinder Ø
32
40
50
63
80
100
125
160
200
8000, P/8000
QA/8032/41
QA/8040/41
QA/8040/41
QA/8063/41
QA/8063/41
QA/8100/41
QA/8100/41
QA/8160/41
QA/8160/41
T1
øD 1H7
F x 45°
H1
H3
øD 2
C
A
B2
2C+TM h 14
B1
Kit contains 2 bearings
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
A
1.26 (32)
1.42 (36)
1.42 (36)
1.65 (42)
1.65 (42)
1.97 (50)
1.97 (50)
2.36 (60)
2.36 (60)
—
—
B1
1.81 (46)
2.17 (55)
2.17 (55)
2.56 (65)
2.56 (65)
2.95 (75)
2.95 (75)
3.62 (92)
3.62 (92)
—
—
B2
0.71 (18)
0.83 (21)
0.83 (21)
0.91 (23)
0.91 (23)
1.12 (28.5)
1.12 (28.5)
1.54 (39)
1.54 (39)
—
—
C
0.41 (10.5)
0.47 (12)
0.47 (12)
0.51 (13)
0.51 (13)
0.63 (16)
0.63 (16)
0.85 (21.5)
0.85 (21.5)
—
—
ØD H11
1.18 (30)
1.38 (35)
1.57 (40)
1.77 (45)
1.77 (45)
2.17 (55)
2.36 (60)
—
—
—
—
ØD1 H7
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
1.26 (32)
1.26 (32)
—
—
ØD2
0.26 (6.6)
0.35 (9)
0.35 (9)
0.43 (11)
0.43 (11)
0.55 (14)
0.55 (14)
0.71 (18)
0.71 (18)
—
—
ØD3
0.43 (11)
0.59 (15)
0.59 (15)
0.71 (18)
0.71 (18)
0.79 (20)
0.79 (20)
1.02 (26)
1.02 (26)
—
—
F x 45°
0.04 (1)
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.08 (2)
0.08 (2)
0.10 (2.5)
0.10 (2.5)
—
—
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
L3
0.31 (8)
0.39 (10)
0.47 (12)
0.47 (12)
0.55 (14)
0.75 (19)
0.98 (25)
—
—
—
—
R
0.04 (1)
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.06 (1.6)
0.08 (2)
0.08 (2)
0.10 (2.5)
0.10 (2.5)
0.13 (3.2)
0.13 (3.2)
ØTD e9
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
1.26 (32)
1.26 (32)
1.57 (40)
1.97 (50)
TL
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
1.26 (32)
1.26 (32)
1.57 (40)
1.97 (50)
TM h14
1.97 (50)
2.48 (63)
2.95 (75)
3.54 (90)
4.33 (110)
5.20 (132)
6.30 (160)
7.87 (200)
9.84 (250)
12.60 (320)
15.75 (400)
T1
0.31 (6.8)
0.35 (9)
0.35 (9)
0.43 (11)
0.43 (11)
0.51 (13)
0.51 (13)
0.61 (15.5)
0.61 (15.5)
—
—
UW 1
1.97 (50)
2.17 (55)
2.56 (65)
2.95 (75)
3.94 (100)
4.72 (120)
5.71 (145)
—
—
—
—
XH
0.71 (18)
0.79 (20)
0.98 (25)
0.98 (25)
1.26 (32)
1.26 (32)
1.57 (40)
—
—
—
—
XL
5.04 (128)
5.71 (145)
6.10 (155)
6.69 (170)
7.40 (188)
8.19 (208)
9.84 (250)
—
—
—
—
Brookville, OH USA
Phone 937-833-4033
H1
1.18 (30)
1.42 (36)
1.42 (36)
1.57 (40)
1.57 (40)
1.97 (50)
1.97 (50)
2.36 (60)
2.36 (60)
—
—
H3
0.59 (15)
0.71 (18)
0.71 (18)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
1.18 (30)
1.18 (30)
—
—
L1
0.63 (16)
0.79 (20)
0.94 (24)
0.94 (24)
1.10 (28)
1.50 (38)
1.97 (50)
—
—
—
—
Style FH*
Style S*
0.44 (0.20) 0.24 (0.11)
0.84 (0.38) 0.35 (0.16)
1.32 (0.60) 0.35 (0.16)
2.43 (1.10) 0.51 (0.23)
4.19 (1.90) 0.51 (0.23)
7.72 (3.50) 0.93 (0.42)
14.33 (6.50) 0.93 (0.42)
—
1.85 (0.84)
—
1.85 (0.84)
—
—
—
—
www.norgren.com
ACT-4-17
8000/38 – Piston Rod Swivel Mounting Style AK
Cylinder Ø
32
40
50
63
80
100
125
160
200
Across Flats
SW 3 SW 2
SW 4
8000, P/8000
QM/8025/38
QM/8040/38
QM/8050/38
QM/8050/38
QM/8080/38
QM/8080/38
QM/8125/38
QM/8160/38
QM/8160/38
SW 1
4°
KK
4°
B1
F
KK
L2
L
8000/32 – Universal Piston Rod Eye Mounting Style UF
(Corresponds to DIN ISO 8139)
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
8000, P/8000
QM/8025/32
QM/8040/32
QM/8050/32
QM/8050/32
QM/8080/32
QM/8080/32
QM/8125/32
QM/8160/32
QM/8160/32
QM/8250/32
QM/8200/32
PV/8000
PVQM/8032/32
PVQM/8040/32
PVQM/8050/32
PVQM/8050/32
PVQM/8080/32
PVQM/8080/32
EN -0.1
CE
øCN H 7
Z
Z
ER
LE
AX
KK
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
AX
0.79 (20)
0.87 (22)
1.10 (28)
1.10 (28)
1.30 (33)
1.30 (33)
2.01 (51)
2.20 (56)
2.20 (56)
2.36 (60)
2.56 (65)
B1
0.20 (5)
0.24 (6)
0.31 (8)
0.31 (8)
0.39 (10)
0.39 (10)
0.53 (13.5)
0.71 (18)
0.71 (18)
—
—
CE
1.69 (43)
1.97 (50)
2.52 (64)
2.52 (64)
3.03 (77)
3.03 (77)
4.33 (110)
4.92 (125)
4.92 (125)
5.59 (142)
6.30 (160)
ØCN H7
0.39 (10)
0.47 (12)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
1.18 (30)
1.38 (35)
1.38 (35)
1.57 (40)
1.97 (50)
EN -0.1
0.55 (14)
0.63 (16)
0.83 (21)
0.83 (21)
0.98 (25)
0.98 (25)
1.46 (37)
1.69 (43)
1.69 (43)
1.93 (49)
2.36 (60)
ER
0.55 (14)
0.63 (16)
0.83 (21)
0.83 (21)
0.98 (25)
0.98 (25)
1.38 (35)
1.57 (40)
1.57 (40)
1.77 (45)
2.28 (58)
F
1.02 (26)
1.02 (26)
1.34 (34)
1.34 (34)
1.65 (42)
1.65 (42)
1.57 (40)
3.07 (78)
3.07 (78)
—
—
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
L2
0.79 (20)
0.94 (24)
1.26 (32)
1.26 (32)
1.57 (40)
1.57 (40)
2.13 (54)
2.83 (72)
2.83 (72)
—
—
LE
0.59 (15)
0.67 (17)
0.87 (22)
0.87 (22)
1.02 (26)
1.02 (26)
1.42 (36)
1.61 (41)
1.61 (41)
1.81 (46)
2.32 (59)
SW 1
0.75 (19)
0.75 (19)
1.18 (30)
1.18 (30)
1.18 (30)
1.18 (30)
1.57 (40)
1.97 (50)
1.97 (50)
—
—
SW 2
0.47 (12)
0.47 (12)
0.75 (19)
0.75 (19)
0.75 (19)
0.75 (19)
0.94 (24)
1.42 (36)
1.42 (36)
—
—
SW 3
0.67 (17)
0.75 (19)
0.94 (24)
0.94 (24)
1.18 (30)
1.18 (30)
1.61 (41)
2.17 (55)
2.17 (55)
—
—
SW 4
1.18 (30)
1.18 (30)
1.65 (42)
1.65 (42)
1.65 (42)
1.65 (42)
2.17 (55)
2.95 (75)
2.95 (75)
—
—
Z
13°
13°
15°
15°
15°
15°
15°
16°
16°
17°
12°
ACT-4-18
Brookville, OH USA
Phone 937-833-4033
KK
M 10 x 1.25
M 12 x 1.25
M 16 x 1.5
M 16 x 1.5
M 20 x 1.5
M 20 x 1.5
M 27 x 2
M 36 x 2
M 36 x 2
M 42 x 2
M 48 x 2
L
2.87 (73)
3.03 (77)
4.17 (106)
4.17 (106)
4.80 (122)
4.80 (122)
5.79 (147)
9.88 (251)
9.88 (251)
—
—
Style AK*
Style F*
0.44 (0.20)
0.20 (0.09)
0.44 (0.20)
0.29 (0.13)
1.43 (0.65)
0.73 (0.33)
1.43 (0.65)
0.73 (0.33)
1.59 (0.72)
1.48 (0.67)
1.59 (0.72)
1.48 (0.67)
3.75 (1.70)
2.98 (1.35)
11.91 (5.40)
6.62 (3.00)
11.91 (5.40)
6.62 (3.00)
—
14.11 (6.40)
—
19.18 (8.70)
www.norgren.com
8000, 8000/M, P/8000 and P/8000/M Pneumatic Cylinder Guide Blocks
QA/8000/51 – Guide Blocks (with sintered bronze bearings)
AK + Guide Block Stroke
Guide Blocks provide accurate guidance for unsupported loads.
Guide rods run through bearings which are protected by wiper rings.
Guide Block, Nut and Mounting Plate:
anodized aluminum
Slide Bearings: sintered bronze
Guide Rods: stainless steel
Wiper Rings: nitrile
Cylinder Ø
32
40
50
63
80
100
8000, P/8000
QA/8032/51/*
QA/8040/51/*
QA/8050/51/*
QA/8063/51/*
QA/8080/51/*
QA/8100/51/*
AJ
AO
AD
AV
AE (Across Flats)
AW
AG
øAX
AP
AW
AT
AR
AL
AS
ø AM
*Insert standard stroke length
(50, 100, 160, 200, 250, 320, 400,
or 500) in mm. Consult Technical
Services for stroke lengths
above 500 mm.
AG
AC +
**
AF (Across Flats)
**
AH
AW
= Notice adjustment range
AN
AG
Guide Blocks are available in Eight Guide Block Stroke lengths (50, 100, 160, 200, 250,
320, 400 or 500 mm). The stroke length of the cylinder should not exceed the stroke length
of the Guide Block. Example: A cylinder with a stroke length of 170 mm will require the
Guide Block Stroke length of 200 mm.
Total (AK Dimension) = AK base + Guide Block Stroke length.
AZ
**Mounting Adjustment from the face of the guide plate to mounting screw is accomplished
at the piston rod connection. (Dimension AC)
*Insert Guide Block Stroke length required.
Example: QA/8032/51/*
50, 100, 160, 200, 250, 320, 400, or 500.
Consult Technical Services for stroke above 500 mm.
BB
BA
Cylinder Ø
32
40
50
63
80
100
AC + **
69 + 2
74 + 2
91.5 + 4
92 + 4
106 + 6
111 + 6
AD
0.47 (12)
0.47 (12)
0.59 (15)
0.59 (15)
0.59 (15)
0.59 (15)
AE
0.59 (15)
0.59 (15)
0.87 (22)
0.87 (22)
1.06 (27)
1.06 (27)
AF
0.67 (17)
0.75 (19)
0.94 (24)
0.94 (24)
1.18 (30)
1.18 (30)
AG
M6
M6
M8
M8
M 10
M 10
AH
0.39 (10)
0.39 (10)
0.47 (12)
0.47 (12)
0.59 (15)
0.59 (15)
AJ
1.28 (32.5)
1.50 (38)
1.83 (46.5)
2.22 (56.5)
1.97 (50)
2.76 (70)
AK
4.33 (110)
4.80 (122)
5.31 (135)
6.02 (153)
7.09 (180)
7.83 (199)
AL
2.28 (58)
2.52 (64)
3.15 (80)
3.74 (95)
5.12 (130)
5.91 (150)
ØAM
0.39 (10)
0.47 (12)
0.47 (12)
0.47 (12)
0.63 (16)
0.63 (16)
Cylinder Ø
32
40
50
63
80
100
AP
3.94 (100)
4.17 (106)
4.92 (125)
5.20 (132)
6.50 (165)
7.28 (185)
AR
3.54 (90)
3.94 (100)
4.72 (120)
4.92 (125)
6.10 (155)
6.89 (175)
AS
2.91 (74)
3.15 (80)
3.86 (96)
4.09 (104)
5.12 (130)
5.91 (150)
AT
3.07 (78)
3.31 (84)
3.94 (100)
4.13 (105)
5.12 (130)
5.91 (150)
AV
1.77 (45)
1.97 (50)
2.36 (60)
2.76 (70)
3.54 (90)
4.33 (110)
❏ AW
1.28 (32.5)
1.50 (38)
1.83 (46.5)
2.22 (56.5)
2.83 (72)
3.50 (89)
ØAX
0.26 (6.6)
0.26 (6.6)
0.35 (9)
0.35 (9)
0.43 (11)
0.43 (11)
AZ
1.89 (48)
2.20 (56)
2.60 (66)
2.99 (76)
3.86 (98)
4.65 (118)
BA
2.99 (76)
3.35 (85)
3.90 (99)
4.49 (114)
5.30 (134.5)
6.04 (153.5)
BB
0.35 (9)
0.43 (11)
0.75 (19)
0.59 (15)
0.98 (25)
1.12 (28.5)
**Notice adjustment range
Note: Supplied complete with mounting screws for cylinder
AN
0.24 (6)
0.24 (6)
0.24 (6)
0.28 (7)
0.35 (9)
0.35 (9)
AO
0.35 (9)
0.43 (11)
0.75 (19)
0.59 (15)
0.55 (14)
0.75 (19)
at 0 mm†
per 100 mm†
2.21 (1.00) 0.13 (0.06)
2.65 (1.20) 0.20 (0.09)
3.97 (1.80) 0.20 (0.09)
4.85 (2.20) 0.20 (0.09)
9.04 (4.10) 0.35 (0.16)
12.79 (5.80) 0.35 (0.16)
†
Maximum load for QA/8000/51
Force in Newtons (Inch lbs.)
1000 (225)
500 (112.5)
8100
8080
100 (22.5)
8063
8050
8040
50 (11.25)
8032
10 (2.25)
10
(.39)
Brookville, OH USA
Stroke in mm (Inches)
50 100
(1.97) (3.94)
Phone 937-833-4033
500
(19.69)
www.norgren.com
ACT-4-19
QA/8000/61 – Guide Blocks (with roller bearings)
CA + Guide Block Stroke
CB +
Guide Block with roller bearings allows high axial loads to be applied.
Guide rods run through roller bearings which are protected by wiper rings.
They can be supplied with optional locking units.
VI
øDD
CC
**
CD
CF ±0.2
CE
DM
CG
CJ (Across Flats)
5
CH
øDH H7 x 2.5 deep
CK
øDH H7 x 2.5 deep
ø DG
CY
DC
(Across
Flats)
DE ±0.2
DF
CO -0,3
CX ±0.2
CP
CR
CW
CS
-
øDJ
2.5 + 0,1
Safety zone
(28 min)
øDH H7
Centering sleeve
**
Guide Block Body, Nut and Mounting Plate:
black anodized aluminum
DL
CT (Across Flats)
Slide Bearings: steel roller ball bearings
Guide Rods: steel inductive hardened
Wiper Rings: nitrile
BLANKING PLUG
* * = Notice adjustment range
Cylinder Ø
32
40
50
63
80
100
8000, P/8000
QA/8032/61/*
QA/8040/61/*
QA/8050/61/*
QA/8063/61/*
QA/8080/61/*
QA/8100/61/*
øCV f7
CN
CI +
2,5
øDK f6
**
CZ
(remove when using locking cartridge)
CX ±0.2
CH
*Insert standard stroke
length (50, 100, 160, 200,
250, 320, 400, or 500)
in mm.
Consult Technical Services
for stroke lengths above
500 mm.
DA -0.3
DB ±0.3
Separate Locking Cartridge
for Guide Block Unit
Cylinder Ø
32
40
50
63
80
100
Model
QA/8032/63
QA/8040/63
QA/8050/63
QA/8050/63
QA/8080/63
QA/8080/63
Forces*
135 (600)
225 (1000)
337 (1500)
337 (1500)
674 (3000)
674 (3000)
Guide Blocks are available in Eight Guide Block Stroke lengths (50, 100, 160, 200, 250, 320, 400 or 500 mm).
The stroke length of the cylinder should not exceed the stroke length of the Guide Block. Example: A cylinder with a
stroke length of 170 mm will require the Guide Block Stroke length of 200 mm.
Total (CA Dimension) = CA base + Guide Block Stroke length.
**Mounting Adjustment from the face of the guide plate to mounting screw is accomplished at the piston rod connection.
(Dimensions CB & CI)
*Insert Guide Block Stroke length required.
Example: QA/8032/61/*
50, 100, 160, 200, 250, 320, 400, or 500. Consult Technical Services for stroke above 500 mm.
*Locking forces per cartridge in Inch lbs (Newton)
Cylinder Ø
32
40
50
63
80
100
CA
6.97 (177)
7.56 (192)
9.33 (237)
9.33 (237)
11.02 (280)
11.02 (280)
CB + **
3.94+.197 (100+5)
4.37+.197 (111+5)
5.04+.394 (128+10)
5.04+.394 (128+10)
5.94+.394 (151+10)
6.14+.394 (156+10)
CC
2.56 (65)
2.72 (69)
2.56 (65)
3.82 (97)
4.41 (112)
4.41 (112)
CD
1.06 (27)
1.26 (32)
1.54 (39)
1.54 (39)
1.93 (49)
2.13 (54)
CE
0.47 (12)
0.47 (12)
0.59 (15)
0.59 (15)
0.79 (20)
0.79 (20)
CF ± 0.2
0.17 (4.3)
0.43 (11)
0.78 (19.8)
0.60 (15.3)
0.83 (21)
0.96 (24.5)
CG
0.26 (6.5)
0.26 (6.5)
0.35 (9)
0.35 (9)
0.43 (11)
0.43 (11)
Cylinder Ø
32
40
50
63
80
100
CO – 0.3
3.82 (97)
4.53 (115)
5.39 (137)
5.98 (152)
7.44 (189)
8.39 (213)
CP
3.54 (90)
4.33 (110)
5.12 (130)
5.71 (145)
7.09 (180)
7.87 (200)
CR
2.91 (74)
3.43 (87)
4.09 (104)
3.02 (119)
5.83 (148)
6.77 (172)
CS
1.99 (50.5)
2.30 (58.5)
2.78 (70.5)
3.37 (85.5)
4.15 (105.5)
5.14 (130.5)
CT
0.67 (17)
0.75 (19)
0.94 (24)
0.94 (24)
1.18 (30)
1.18 (30)
ØCV f7
0.47 (12)
0.63 (16)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
CW
2.40 (61)
2.72 (69)
3.35 (85)
3.94 (100)
5.12 (130)
5.91 (150)
❏ CX ± 0.2
1.28 (32.5)
1.50 (38)
1.83 (46.5)
2.22 (56.5)
2.83 (72)
3.50 (89)
CY
0.20 (5)
0.24 (6)
0.24 (6)
0.24 (6)
0.31 (8)
0.31 (8)
CZ
4.92 (125)
5.51 (140)
5.91 (150)
7.17 (182)
8.46 (215)
8.66 (220)
Cylinder Ø
32
40
50
63
80
100
ØDC
0.26 (6.6)
0.26 (6.6)
0.35 (9)
0.35 (9)
0.43 (11)
0.43 (11)
ØDD
0.43 (11)
0.43 (11)
0.59 (15)
0.59 (15)
0.71 (18)
0.71 (18)
DE ± 0.2
3.07 (78)
3.31 (84)
3.94 (100)
4.13 (105)
5.12 (130)
5.91 (150)
DF
M6
M6
M8
M8
M 10
M 10
ØDG
0.79 (20)
0.94 (24)
1.18 (30)
1.18 (30)
1.50 (38)
1.50 (38)
ØDH H7
0.35 (9)
0.35 (9)
0.43 (11)
0.43 (11)
0.51 (13)
0.51 (13)
ØDJ
M5
G 1/8
G 1/8
G 1/8
G 1/8
G 1/8
ØDK f6
0.35 (9)
0.35 (9)
0.43 (11)
0.43 (11)
0.51 (13)
0.51 (13)
DL
1.77 (45)
2.44 (62)
2.95 (75)
2.95 (75)
4.61 (117)
4.61 (117)
DM
0.55 (14)
0.55 (14)
0.63 (16)
0.63 (16)
0.79 (20)
0.79 (20)
**Notice adjustment range
Note: Supplied complete with mounting screws for cylinders and two centering sleeves.
ACT-4-20
Brookville, OH USA
Phone 937-833-4033
CH
M6
M6
M8
M8
M10
M10
CI + **
3.33+.197 (84.5+5)
3.46+.197 (88+5)
3.70+.394 (94+10)
3.88+.394 (98.5+10)
4.49+.394 (114+10)
4.55+.394 (115.5+10)
CJ
0.51 (13)
0.59 (15)
0.87 (22)
0.87 (22)
1.06 (27)
1.06 (27)
CK
0.20 (5)
0.24 (6)
0.24 (6)
0.24 (6)
0.28 (7)
0.28 (7)
DA – 0.3
1.97 (50)
2.28 (58)
2.76 (70)
3.35 (85)
4.13 (105)
5.12 (130)
CN
2.40 (61)
2.64 (67)
2.97 (75.5)
3.15 (80)
3.62 (92)
3.66 (93)
DB ± 0.3
1.77 (45)
2.13 (54)
2.48 (63)
3.15 (80)
3.94 (100)
4.72 (120)
per 100 mm†
at 0 mm†
2.65 (1.20) 0.40 (0.18)
4.85 (2.20) 0.71 (0.32)
7.90 (3.60) 1.08 (0.49)
10.14 (4.60) 1.08 (0.49)
19.18 (8.70) 1.70 (0.77)
24.26 (11.0) 1.70 (0.77)
†
www.norgren.com
Maximum load for QA/8000/61
Center of gravity
of load capacity
Center of gravity
f
Extended
Extended
Maximum load capacity is dependent on the stroke
extension of a horizontally installed guide unit. In the
case of short stroke operation, the load capacity figures
taken from the diagram must be multiplied by the
correction factor (diagram 2). In the curves of load capacity
(diagram 1), the short stroke corrections have already
been taken into account for an stroke extension > 60 mm.
The total deflection of guide rods will be determined
by the addition of the amount of deflection due to own
weight (diagram 3) plus the amount of deflection due
to load capacity (diagram 4).
Loading Values
Deflection Values
Maximum Load Capacity
Depending on
Correction Factor
Stroke Extension
Deflection Caused
by Own Weight
Deflection Caused
by a Load of 10 N
Diagram 1
Diagram 3
Diagram 4
Diagram 2
Load capacity
Newtons (Inch lbs.)
Correction factor
Deflection in mm (Inches)
f
Deflection in mm (Inches)
f
500 (112.5)
1.0 (.039)
2.5 (.098)
2.5 (.098)
400 (89.9)
0.9 (.035)
2.0 (.079)
2.0 (.079)
300 (67.4)
0.8 (.031)
1.5 (.059)
0.7 (.027)
1.0 (.039)
0.6 (.023)
0.5 (.020)
8032
8032
Stroke extended in mm (Inches)
1.0 (.039)
8040
0.5 (.020)
8050 - 8063
8080 - 8100
500 (19.69)
400 (15.75)
300 (11.81)
100 (3.94)
200 (7.87)
0
600 (23.62)
500 (19.69)
400 (15.75)
300 (11.81)
200 (7.87)
0
0
600 (23.62)
8040
8050 8063
8080 8100
100 (3.94)
60 (2.362)
20 (.787)
600 (23.62)
400 (15.75)
500 (19.69)
200 (7.87)
300 (11.81)
0.5 (.020)
100 (3.94)
0
0
40 (1.575)
100 (22.5)
0
200 (45.0)
1.5 (.059)
0
80
80
-8
10
80
0
50
-8
80
40 063
803
2
Reduction of load capacity
for short-stroke operation
In the case of shock load applications, the figures given in the diagrams above must be reduced by a factor of 2.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-4-21
Mountings
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
Style A
Style AK
Style B, G
Style C
Style D
Style D2
Series
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
8000
8000
8000
8000
ACT-4-11
QM/8032/35
QM/8032/35
—
QM/8032/35
QM/8032/35
—
QM/8050/35
QM/8050/35
—
QM/8050/35
QM/8050/35
—
QM/8080/35
QM/8080/35
—
QM/8080/35
QM/8080/35
—
QM/8125/35
QM/8125/35
QM/8160/35
QM/8160/35
QM/8250/35
QM/8320/35
Style F
ACT-4-18
QM/8025/38
QM/8025/38
—
QM/8040/38
QM/8040/38
—
QM/8050/38
QM/8050/38
—
QM/8050/38
QM/8050/38
—
QM/8080/38
QM/8080/38
—
QM/8080/38
QM/8080/38
—
QM/8125/38
QM/8125/38
QM/8160/38
QM/8160/38
—
—
Style FH
ACT-4-11
QA/8032/22
QA/8032/22
PVQA/8032/22
QA/8040/22
QA/8040/22
PVQA/8040/22
QA/8050/22
QA/8050/22
PVQA/8050/22
QA/8063/22
QA/8063/22
PVQA/8063/22
QA/8080/22
QA/8080/22
PVQA/8080/22
QA/8100/22
QA/8100/22
PVQA/8100/22
QM/8125/22
QM/8125/22
QM/8160/22
QM/8200/22
QM/8250/22
QM/8320/22
Style H
ACT-4-11
QA/8032/21
QA/8032/21
—
QA/8040/21
QA/8040/21
—
QA/8050/21
QA/8050/21
—
QA/8063/21
QA/8063/21
—
QA/8080/21
QA/8080/21
—
QA/8100/21
QA/8100/21
—
QM/8125/21
QM/8125/21
QM/8160/21
QM/8200/21
QM/8250/21
QM/8320/21
Style L
ACT-4-13
QA/8032/23
QA/8032/23
PVQA/8032/23
QA/8040/23
QA/8040/23
PVQA/8040/23
QA/8050/23
QA/8050/23
PVQA/8050/23
QA/8063/23
QA/8063/23
PVQA/8063/23
QA/8080/23
QA/8080/23
PVQA/8080/23
QA/8100/23
QA/8100/23
PVQA/8100/23
QM/8125/23
QM/8125/23
QM/8160/23
QM/8200/23
QM/8250/23
QM/8320/23
Style M
ACT-4-14
QA/8032/42
QA/8032/42
—
QA/8040/42
QA/8040/42
—
QA/8050/42
QA/8050/42
—
QA/8063/42
QA/8063/42
—
QA/8080/42
QA/8080/42
—
QA/8100/42
QA/8100/42
—
QA/8125/42
QA/8125/42
QA/8160/42
QA/8200/42
—
—
Style R
Series
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
8000
8000
8000
8000
ACT-4-12
QM/8025/25
QM/8025/25
PVQM/8032/25
QM/8040/25
QM/8040/25
PVQM/8040/25
QM/8050/25
QM/8050/25
PVQM/8050/25
QM/8050/25
QM/8050/25
PVQM/8050/25
QM/8080/25
QM/8080/25
PVQM/8080/25
QM/8080/25
QM/8080/25
PVQM/8080/25
QM/8125/25
QM/8125/25
QM/8160/25
QM/8160/25
QM/8250/25
QM/8320/25
ACT-4-17
QA/8032/34
QA/8032/34
—
QA/8040/34
QA/8040/34
—
QA/8050/34
QA/8050/34
—
QA/8063/34
QA/8063/34
—
QA/8080/34
QA/8080/34
—
QA/8100/34
QA/8100/34
—
QA/8125/34
QA/8125/34
—
—
—
—
ACT-4-16
QA/8032/28
—
—
QA/8040/28
—
—
QA/8050/28
—
—
QA/8063/28
—
—
QA/8080/28
—
—
QA/8100/28
—
—
QM/8125/28
—
QM/8160/28
QM/8200/28
QM/8250/28
QM/8320/28
ACT-4-13
QA/8032/24
QA/8032/24
PVQA/8032/24
QA/8040/24
QA/8040/24
PVQA/8040/24
QA/8050/24
QA/8050/24
PVQA/8050/24
QA/8063/24
QA/8063/24
PVQA/8063/24
QA/8080/24
QA/8080/24
PVQA/8080/24
QA/8100/24
QA/8100/24
PVQA/8100/24
QM/8125/24
QM/8125/24
QM/8160/24
QM/8200/24
QM/8250/24
QM/8320/24
ACT-4-12
QM/8032/26
QM/8032/26
—
QM/8040/26
QM/8040/26
—
QM/8050/26
QM/8050/26
—
QM/8063/26
QM/8063/26
—
QM/8080/26
QM/8080/26
—
QM/8100/26
QM/8100/26
—
QM/8125/26
QM/8125/26
QM/8160/26
QM/8200/26
—
—
ACT-4-15
QA/8032/27
QA/8032/27
PVQA/8032/27
QA/8040/27
QA/8040/27
PVQA/8040/27
QA/8050/27
QA/8050/27
PVQA/8050/27
QA/8063/27
QA/8063/27
PVQA/8063/27
QA/8080/27
QA/8080/27
PVQA/8080/27
QA/8100/27
QA/8100/27
PVQA/8100/27
QM/8125/27
QM/8125/27
QM/8160/27
QM/8200/27
—
—
How to Order Mounting Kits
ISO/VDMA Cylinders are unique: after selecting bore, stroke and type
of cylinder, the desired mounting kit is chosen. These kits come complete with
required mounting hardware.
ACT-4-22
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Mountings
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
Series
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
8000
8000
8000
8000
Series
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
PV/8000
8000
P/8000
8000
8000
8000
8000
Style S
Style SS
Style SW
Style UF
Style UH
Style UL
ACT-4-17
QA/8032/41
QA/8032/41
—
QA/8040/41
QA/8040/41
—
QA/8040/41
QA/8040/41
—
QA/8063/41
QA/8063/41
—
QA/8063/41
QA/8063/41
—
QA/8100/41
QA/8100/41
—
QA/8100/41
QA/8100/41
QA/8160/41
QA/8160/41
—
—
Style UR
ACT-4-12
M/P19931
M/P19931
—
M/P19932
M/P19932
—
M/P19933
M/P19933
—
M/P19934
M/P19934
—
M/P19935
M/P19935
—
M/P19936
M/P19936
—
M/P19937
M/P19937
M/P19938
M/P19939
—
—
Style US
ACT-4-13
M/P19493
M/P19493
M/P40459
M/P19494
M/P19494
M/P40460
M/P19495
M/P19495
M/P40461
M/P19496
M/P19496
M/P40462
M/P19497
M/P19497
M/P40463
M/P19498
M/P19498
M/P40464
M/P19499
M/P19499
M/P19679
M/P19683
M/P19446
M/P19447
Guide Blocks
ACT-4-18
QM/8025/32
QM/8025/32
PVQM/8032/32
QM/8040/32
QM/8040/32
PVQM/8040/32
QM/8050/32
QM/8050/32
PVQM/8050/32
QM/8050/32
QM/8050/32
PVQM/8050/32
QM/8080/32
QM/8080/32
PVQM/8080/32
QM/8080/32
QM/8080/32
PVQM/8080/32
QM/8125/32
QM/8125/32
QM/8160/32
QM/8160/32
QM/8250/32
QM/8320/32
Guide Blocks
ACT-4-16
QA/8032/40
PQA/8032/40
—
QA/8040/40
PQA/8040/40
—
QA/8050/40
PQA/8050/40
—
QA/8063/40
PQA/8063/40
—
QA/8080/40
PQA/8080/40
—
QA/8100/40
PQA/8100/40
—
QA/8125/40
—
QA/8160/40
QA/8200/40
—
—
Locking Unit
ACT-4-14
QA/8032/43
QA/8032/43
—
QA/8040/43
QA/8040/43
—
QA/8050/43
QA/8050/43
—
QA/8063/43
QA/8063/43
—
QA/8080/43
QA/8080/43
—
QA/8100/43
QA/8100/43
—
QA/8125/43
QA/8125/43
QA/8160/43
QA/8200/43
—
—
Locking Cartridge
ACT-4-10
QA/8032/59
QA/8032/59
—
QA/8040/59
QA/8040/59
—
QA/8050/59
QA/8050/59
—
QA/8063/59
QA/8063/59
—
QA/8080/59
QA/8080/59
—
QA/8100/59
QA/8100/59
—
QA/8125/59
QA/8125/59
•
•
—
—
Locking
Guide
Unit
Blocks
ACT-4-10
ACT-4-20
QA/8032/63 QA/8032/63
QA/8032/63
—
QA/8040/63 QA/8040/63
QA/8040/63
—
QA/8050/63 QA/8050/63
QA/8050/63
—
QA/8063/63 QA/8050/63
QA/8063/63
—
QA/8080/63 QA/8080/63
QA/8080/63
—
QA/8100/63 QA/8080/63
QA/8100/63
—
QA/8125/63 —
QA/8125/63
•
—
•
—
—
—
—
—
ACT-4-15
QA/8032/33
QA/8032/33
PVQA/8032/33
QA/8040/33
QA/8040/33
PVQA/8040/33
QA/8050/33
QA/8050/33
PVQA/8050/33
QA/8063/33
QA/8063/33
PVQA/8063/33
QA/8080/33
QA/8080/33
PVQA/8080/33
QA/8100/33
QA/8100/33
PVQA/8100/33
QM/8125/33
QM/8125/33
QM/8160/33
QM/8200/33
—
—
ACT-4-14
M/P40310
M/P40310
—
M/P40311
M/P40311
—
M/P40312
M/P40312
—
M/P40313
M/P40313
—
M/P40314
M/P40314
—
M/P40315
M/P40315
—
M/P71355
M/P71355
M/P71356
M/P71357
—
—
ACT-4-19
QA/8032/51/*
QA/8032/51/*
—
QA/8040/51/*
QA/8040/51/*
—
QA/8050/51/*
QA/8050/51/*
—
QA/8063/51/*
QA/8063/51/*
—
QA/8080/51/*
QA/8080/51/*
—
QA/8100/51/*
QA/8100/51/*
—
—
—
—
—
—
—
ACT-4-20
QA/8032/61/*
QA/8032/61/*
—
QA/8040/61/*
QA/8040/61/*
—
QA/8050/61/*
QA/8050/61/*
—
QA/8063/61/*
QA/8063/61/*
—
QA/8080/61/*
QA/8080/61/*
—
QA/8100/61/*
QA/8100/61/*
—
—
—
—
—
—
—
*Insert standard stroke length (50, 100, 160, 200, 250, 320, 400, or 500) in mm. Consult Technical Services for strokes lengths above 500 mm.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-4-23
8000/M, P/8000/M and PV/8000/M Pneumatic Cylinder Switches
Switches
Model
Reed
Solid State
Pneumatic
Series 8000
Series P/8000
Series PV/8000
Model
Reed
QM/31/*
TQM/31/*
QM/31/C/*
QM/32/*
QM/32/P
QM/33/*
TQM/33/*
QM/33/C/*
QM/34/*
QM/34/P
QM/34/S/*
QM/34/N/*
Solid State
QM/132/*
QM/132/P
QM/132/E/*
QM/134/*
QM/134/P
QM/134/E/*
QM/134/N/*
QM/134/N/P
QM/134/X/*
QM/33
—
—
ø32 – ø200
ø32 – ø125
ø32 – ø100
QM/34
QM/134
—
ø32 – ø200
ø32 – ø125
ø32 – ø100
QM/34/P
QM/134/P
—
ø32 – ø200
ø32 – ø125
ø32 – ø100
QM/31
—
—
ø32 – ø320
—
—
QM/32
QM/132
—
ø32 – ø320
—
—
Voltage
V a.c.
10 to 240
10 to 240
10 to 110
10 to 240
10 to 240
10 to 240
10 to 30
10 to 110
—
—
10 to 240
—
V d.c.
10 to 240
10 to 240
10 to 175
10 to 240
10 to 240
10 to 240
10 to 30
10 to 175
10 to 30
10 to 30
10 to 240
10 to 30
Current
Max.
2A
2A
0.25 A
1A
1A
1.5 A
1.5 A
0.25 A
1A
1A
0.5 A
1A
Temperature
LED Features
°C
(°F)
-20° to 80° (-4° to 176°) —
—
-20° to 150° (-4° to 302°) —
High Temperature
-20° to 80° (-4° to 176°) —
Changeover
-20° to 80° (-4° to 176°) ●
—
-20° to 80° (-4° to 176°) ●
—
-20° to 80° (-4° to 176°) —
—
-20° to 150° (-4° to 302°) —
High Temperature
-20° to 80° (-4° to 176°) —
Changeover
-20° to 80° (-4° to 176°) ●
Output: Positive
-20° to 80° (-4° to 176°) ●
Output: Positive
-20° to 80° (-4° to 176°) ●
—
-20° to 80° (-4° to 176°) ●
Output: Negative
—
—
—
—
—
—
—
—
—
10 to 30
10 to 30
10 to 30
10 to 30
10 to 30
10 to 30
10 to 30
10 to 30
8.2
0.2 A
0.2 A
0.2 A
0.2 A
0.2 A
0.2 A
0.2 A
0.2 A
2.2 /1 mA
-20° to 80° (-4° to 176°)
-20° to 80° (-4° to 176°)
-20° to 80° (-4° to 176°)
-20° to 80° (-4° to 176°)
-20° to 80° (-4° to 176°)
-20° to 80° (-4° to 176°)
-20° to 80° (-4° to 176°)
-20° to 80° (-4° to 176°)
-25° to 75° (-13° to 167°)
●
●
●
●
●
●
●
●
●
PNP
PNP
Pulse strecher
PNP
PNP
Pulse strecher
NPN
NPN
NAMUR
QM/32/P
QM/132/P
—
ø32 – ø320
—
—
—
—
QM/140
ø32 – ø100
—
—
Cable
Length
2, 5, 10 m (6.5', 16.5', 33')
5 m (16.5")
5 m (16.5")
2, 5, 10 m (6.5', 16.5', 33')
5 m (16.5")
2, 5, 10 m (6.5', 16.5', 33')
5 m (16.5")
5 m (16.5")
2, 5, 10 m (6.5', 16.5', 33')
5 m (16.5")
2, 5, 10 m (6.5', 16.5', 33')
2, 5 m (6.5', 16.5')
Cable
Type
PVC 2 x 0.75
Silicone 2x0.75
PVC 3 x 0.5
PVC 2 x 0.75
PVC 3 x 0.34
PVC 2 x 0.34
Silicone 2x0.34
PVC 2 x 0.34
PVC 3 x 0.34
PVC 3 x 0.25
PVC 2 x 0.34
PVC 3 x 0.34
Plug-in Cable
Straight**
—
—
—
—
M/P34692/5
—
—
—
—
M/P34614/5
—
—
90°
—
—
—
—
—
—
—
—
—
M/P34615/5
—
—
2, 5, 10 m (6.5', 16.5', 33')
5 m (16.5")
5 m (16.5")
2, 5 m (6.5', 16.5')
5 m (16.5")
5 m (16.5")
2, 5 m (6.5', 16.5')
5 m (16.5")
5 m (16.5")
PVC 3 x 0.35
PVC 3 x 0.34
PVC 3 x 0.35
PVC 3 x 0.34
PVC 3 x 0.25
PVC 3 x 0.34
PVC 3 x 0.34
PVC 3 x 0.25
PVC 2 x 0.34
—
M/P34692/5
—
—
M/P34614/5
—
—
M/P34614/5
—
—
—
—
—
M/P34615/5
—
—
M/P34615/5
—
*Insert cable length
Full information on switches (technical data, polyurethane cable, dimensions, etc.) please refer to ACT-4-25.
** Not included with switch
QM/140 Switch
Pneumatic
QM/140
Operating Pressure
2 to 6 bar (29 to 87 PSI)
Flow Rate
Orifice Size
Temperature
40 l/min (12.2 ft3/min) 2 mm (.078 inches) +60°C (+140°F)
Active Spot
●
Connections
For 3 mm (.118 Inches) I/D tubing
Basic Dimensions
The QM/140 is a pneumatic
proximity sensor with
non-contacting sensing
and a pneumatic output
good for intrinsically
safe applications.
All dimensions in mm (Inches)
Optical indicator
34 (1.33)
M4
2
3 2
9.5
(0.37)
7.5
(.30)
15 (0.59)
*Actuated by
a magnetic field
*
12
4 (0.16)
1
2 (0.08)
15 (0.59)
1.5 (0.06)
6.5 (0.04)
8
12
(0.31)
(0.47)
4 (0.16)
17 (0.67)
3
17
18
(0.67) (0.70)
9 (0.35)
14.5 (0.57)
1
18 (0.70)
Ordering Examples
Cylinders: To order a basic 80 mm bore magnetic piston cylinder with a 50 mm stroke specify: DA/8080/M/50.
Mountings: To order a front flange mounting style G for 80 mm bore cylinder specify: QA/8080/22.
Switches: To order a reed switch with LED and 2 m cable length specify: QM/34/2.
Cable Length
Brackets for switches (ACT-4-26):
To order a bracket for magnetically operated switches QM/34, 80 mm bore cylinder specify: QM/27/2/1.
ACT-4-24
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Switch Schematics
Symbol
brown
blue
Switches (without LED)
QM/31/*
TQM/31/*
Symbol
Switches (with LED)
QM/31/C/*
Description
Reed Switch (normally open)
High temperature +150°C (+302°F), silicone cable 2 x 0.75 (.03")
2, 5 or 10 m length (6.5', 16.5' or 33').
Changeover, PVC cable 3 x 0.5 (.02") 5 m (16.5') length, switching
voltage 10 to 110 V a.c./175 V d.c., switching current 250 mA,
switching power 5W/ 5 VA, response time 0.7 ms,
contact resistance 100 mW, vibration resistance 20 g (during 11 ms).
black
blue
brown
+ brown
QM/32/*
QM/32/P
Plug-in connector, connector cable – see ACT-4-24.
blue
(Output)
1
+ brown
blue
(Output)
4
brown
blue
black
blue
brown
QM/33/*
TQM/33/*
High temperature +150°C (+302°F), silicone cable 2 x 0.34 (.01")
switching voltage 10 to 30 V a.c./10 to 30 V d.c.
QM/33/C/*
1
3
4
+ brown
blue
black
(Output)
QM/34/*
Changeover, PVC cable 3 X 0.34 (.01") 5 m (16.5") length, switching
voltage 10 to 110 V a.c./175 V d.c., switching current 250 mA,
switching power 5 W/ 5 VA, response time 0.7 ms, contact resistance
100 mW, vibration resistance 20 g (during 11 ms).
+ brown
blue
black
(Output)
QM/34/P
QM/34/N/*
QM/34/N/*/PU
Negative output, PVC cable 3 x 0.34 (.01") 2 or 5 m (6.5' or 16.5') length.
Very flexible polyurethane cable 3 x 0.34 (.01") 2 m (6.5') length.
QM/34/S/*
QM/132/*/PU
PVC cable 2 x 0.34 (.01") 2, 5 or 10 m (6.5', 16.5' or 33') length,
switching voltage 10 to 240 V a.c./d.c., switching current 500 mA,
switching power 50 W/ 50 VA, response time 2 ms.
Solid State
Pulse strecher 50 to 60 mm (1.97" to 2.36") length,
PVC cable 3 x 0.5 (.02") 5 m (16.5') length.
QM/132/P
QM/134/*
QM/134/E/*
QM/134/*/PU
Solid State
Pulse strecher PVC cable 3 x 0.34 (.01") 5 m (16.5') length,
response time 30 ms.
Very flexible polyurethane cable 3 x 0.34 (.01") 5 m (16.5") length.
QM/134/P
QM/134/N
QM/134/N/PU
Solid State
Very flexible polyurethane cable 3 x 0.34 (.01") 5 m (16.5") length.
QM/134/N/P
QM/134/X/*
NAMUR conforms to DIN 19234, PVC cable 2 x 0.34 (.01") 5 m (16.4')
length, (cover blue), switching voltage 8.2 V d.c., switching current
active ≥ 2.2 mA / passive £ 1 mA, response time 0.15 ms, operating
frequency 5 kHZ, LED yellow, operating temperature -25°C to +75°C
(-13°F to +167°F), protection rating IP 67 (DIN 40050).
blue
+ brown
black
(Output)
+ brown
~
~
blue
(Output)
+ brown
blue
pnp
black
(Output)
1
3
pnp
4
+ brown
blue
black
(Output)
+ brown
blue
pnp
black
(Output)
1
3
pnp
4
+ brown
blue
black
(Output)
blue
+ brown
npn
QM/34/S/*/PU
QM/132/*
QM/132/E/*
black
(Output)
1
3
npn
blue
+ brown
4
black
(Output)
+ brown
blue
*Insert cable length
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-4-25
All Dimensions in mm (Inches)
Series 8000 Bracket
Ø
32
40
50
63
80
100
125
160
200
Switch Bracket
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
A
0.35 (9)
0.31 (8)
0.28 (7)
0.28 (7)
0.28 (7)
0.08 (2)
-0.16 (-4)
-0.39 (-10)
-0.67 (-17)
B
0.28 (7)
0.31 (8)
0.20 (5)
0.28 (7)
0.16 (4)
0.08 (2)
-0.12 (-3)
-0.35 (-9)
-0.55 (-14)
Switches: QM/33, QM/34 and QM/134 (ø8 mm)
Weight
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
0.02 (0.010)
12 (.472)
Switch mounting bracket
A
B
Magnetically operated switch
Series P/8000 & PV/8000 Bracket
B
Ø
32
40
50
63
80
100
125
Switch Bracket
QM/33/P32/22
QM/33/P32/22
QM/33/P32/22
QM/33/P32/22
QM/33/P32/22
QM/33/P32/22
QM/33/P32/22
B
0.22 (5.5)
0.26 (6.5)
0.22 (5.5)
0.26 (6.5)
0.14 (3.5)
0.06 (1.5)
0.08 (2)
Weight
0.007 (0.003)
0.007 (0.003)
0.007 (0.003)
0.007 (0.003)
0.007 (0.003)
0.007 (0.003)
0.007 (0.003)
10 (.394)
Series 8000 Bracket
Switches: QM/31, QM/32 and QM/132
Ø
32
40
50
63
80
100
125
160
200
250
320
Switch Bracket
QM/31/032/22
QM/31/032/22
QM/31/032/22
QM/31/032/22
QM/31/080/22
QM/31/080/22
QM/31/080/22
QM/31/160/22
QM/31/160/22
QM/31/250/22
QM/31/320/22
A
0.18 (4.5)
0.22 (5.5)
0.18 (4.5)
0.18 (4.5)
0.06 (1.5)
0.02 (0.5)
-0.04 (-1)
0
-0.16 (-4)
-0.12 (-3)
-0.83 (-21)
B
1.50 (38)
1.69 (43)
1.89 (48)
2.09 (53)
2.40 (61)
2.68 (68)
3.11 (79)
3.60 (91.5)
4.17 (106)
5.43 (138)
6.06 (154)
Weight
0.06 (0.026)
0.06 (0.026)
0.06 (0.026)
0.06 (0.026)
0.06 (0.028)
0.06 (0.028)
0.06 (0.028)
0.05 (0.023)
0.05 (0.023)
0.09 (0.041)
0.18 (0.080)
A
B
Series 8000 Bracket with Holding Strap
Switch: QM/140
Weight
0.04 (0.020)
0.04 (0.020)
0.04 (0.020)
0.04 (0.020)
0.04 (0.020)
0.04 (0.020)
A
1
A
1.24 (31.5)
1.20 (30.5)
1.24 (31.5)
1.16 (29.5)
1.20 (30.5)
1.18 (30)
2
Switch Bracket
QM/140/010/22
QM/140/010/22
QM/140/010/22
QM/140/010/22
QM/140/010/22
QM/140/010/22
3
Ø
32
40
50
63
80
100
Pneumatic switch
ACT-4-26
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Spares: Replacement Piston Rod
Cylinder Seal Kits
2
Cylinder Ø
32
40
50
63
80
100
125
160
200
250
320
Model
(Standard) Item
DA/8040, DA/8040/M
DA/8050, DA/8050/M
DA/8063, DA/8063/M
DA/8080, DA/8080/M
DA/8100, DA/8100/M
DA/8125, DA/8125/M
DA/8160, DA/8160/M
DA/8200, DA/8200/M
DA/8250, DA/8250/M
DA/8320, DA/8320/M
6
26
Cylinder Seal Kit
Description
Quantity
DA/8032, DA/8032/M
QA/8040/00
QA/8050/00
QA/8063/00
QA/8080/00
QA/8100/00
QA/8125/00
QA/8160/00
QA/8200/00
QA/8250/00
QA/8320/00
10
11
5
Comprising
2
5
6
10
11
26
QA/8032/00
Piston rod seal
Cushion seal
Sealing ring
Piston seal
Wear ring
O-ring (ø32 mm to ø100 mm)
1
2
2
2
1
1
Note: Please specify the cylinder model number when ordering cylinder seal kits and replacement piston rods.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-4-27
Section 5
Tiny Tim
Series T, VT, ET, and
TA, TAV, and TAE NFPA Air Actuators
Series T & VT Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-2
Series ET Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-3
Series T & VT Specifications . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-4
Series ET Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-5
Series T, VT, and ET Dimensions . . . . . . . . . . . . . . . . . . . . .ACT-5-6
T, VT, and ET Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-9
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-10
T, VT, and ET Ordering Information . . . . . . . . . . . . . . . . . . .ACT-5-12
Tiny Tim NFPA Features . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-13
Series NFPA Specifications . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-14
NFPA Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-15
NFPA Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-18
NFPA Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . .ACT-5-20
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-5-1
Tiny Tim Series Actuators
Series T & VT Tiny Tim Air Cylinders
Series T
Series T uses Quad Ring Buna-Ring piston seal.
4
1
7
2
3
8
5
1 Heads and Caps: Corrosion resistant
alloy or black oxided steel.
9
6
4 Piston Rod: Hard chrome plated high
tensile steel piston rod.
2 Rod Bushing: Oil-filled, sintered
iron bushing.
5 Seals: O-ring type seals.
3 Rod Seal: Replaceable block-vee
Buna-N rod seal (Viton® optional).
6 Tie Rods: High yield strength tie
rods.
7 Piston Seal: Replaceable quad
ring Buna-N (Viton® optional).
8 Piston: Machined alloy.
9 Tubing: Hard anodized I.D.
aluminum tubing.
Series VT
Series VT uses Block-Vee Buna-N piston seal. This
increases envelope dimension by 3/8" but provides lower
breakaway pressure. (See ACT-5-4 for specifications)
8
4
1
2
3
7
5
9
6
1 Heads and Caps: Corrosion
resistant alloy or black oxided steel.
4 Piston Rod: Hard chrome plated high
tensile steel piston rod.
iron bushing.
ACT-5-2
rods.
Brookville, OH USA
Phone 937-833-4033
7 Piston Seal: Replaceable BlockVee Buna-N (Viton® optional).
aluminum tubing.
www.norgren.com
Series ET Tiny Tim Air Cylinders
Series ET
Series ET actuators achieve their cushion effect through the normal compression of the Buna-N “shock-absorber”seals
at the completion of the cylinder stroke. This compressive action absorbs the cylinder’s kinetic energy and reduces the
shock created by the piston striking the end caps.
The measurable cushion effect of the “shock-absorber” seals provides a predictable pounds stoppable/piston speed
ratio (Chart 1, ACT-5-5), allowing you to determine the exact weight that can be stopped at a given piston speed.
Series ET actuators also help meet OSHA’s noise and clean air standards (Chart 3, ACT-5-5). They are guaranteed to
operate without lubrication for one year regardless of cycles. Non-lubricated operation is achieved by the combined
efforts of an oil-impregnated sintered iron piston rod busing that lubricates the rod during normal operation, and through
the use of a reinforced Teflon wear ring on the center perimeter of the piston. This ring reduces friction between the
piston and the cylinder tube.
5
1
7
2
3
9
4
1 Heads and Caps: Corrosion
resistant alloy or black oxided steel.
2 Bushing: Oil-filled rod bushing.
8
6
rods.
7 Wear Ring: Teflon® reinforced
wear ring.
aluminum tubing.
Brookville, OH USA
Phone 937-833-4033
9 Impact Dampening Seals:
Impact dampening seals
specifically designed piston
incorporated energy absorbing
seals to dissipate the forces
generated during impact without
increasing envelope dimensions.
Not available for cylinders with
oversize rods. Not recommended
for applications that require 100%
repeatable stroke increments, or for
applications that exceed the
pounds stoppable capacities shown
on ACT-5-5 at the various
recommended piston speeds.
www.norgren.com
ACT-5-3
Series T & VT Tiny Tim
● 3/4" and 1-1/8" bore
● Single and double rod end styles
● Rated 150 psi air
● -20° to 200°F (-29° to 107°C) operating temperatures
● Viton seals optional for higher temperatures
Differences between Series T and Series VT air actuators
Series T contains a Quad Ring Buna-N piston seal. The VT
Series utilizes a dual Block-Vee Buna-N piston seal design.
The Block-Vee seals increase the envelope dimensions of the
Series VT cylinders by 3/8". All other features of the Series T
and VT are the same.
Series VT cylinders have a slightly lower breakaway pressure
(psig) than the Series T Tiny Tim air cylinders. See “Minimum
Breakaway Pressures (PSIG)” chart.
Technical Information
Medium: Compressed air, filtered, lubricated or non-lubricated
Operation: Single or double acting
Operating Pressure: 150 PSI (10 bar)
Operating Temperature: -20° to 200°F (-29° to 107°C)
Cylinder Diameters: 3/4", 1-1/8"
Minimum Breakaway Pressures (PSIG)
Non-cushioned cylinders, mounted horizontally
with no load on the piston rod.
Cylinder Bore
(inches)
3/4"
1-1/8"
Model
PSIG
Series T
Series VT-ET
Series T
Series VT-ET
12
8
7
5
The proper selection and application of a fluid
power actuator requires consideration of the
following: Operation pressure, the fluid medium,
mounting style, length of stroke, type of piston rod
connection to the load, thrust or mounting tension
loading on the rod, mounting attitude, speed of the
stroke and how the load in motion will be stopped.
Bore Size Selection
The following formulae and charts may be used in
the proper selection of the actuator bore size.
● Extended force in pounds = bore area in sq.
inches x pressure to cap in psig.
● Retract force in pounds = (bore area – rod area)
in sq. inches x pressure to head in psig.
Bore Areas Chart A
Cylinder
Area
Bore (in.) (Sq. in.)
Bore Areas Chart B
Rod Dia.
Area
(in.)
(Sq. in.)
3/4"
.44
5/16"
.076
1-1/8"
.99
3/8
.11
Note: Allow for friction and attached mechanism
when selecting cylinder bore size. Also, consider
the weight of the piston and rod assembly if the
cylinder is not mounted with the rod in a horizontal
plane.
ACT-5-4
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series ET Tiny Tim
● 3/4" and 1-1/8" bore
Chart 1
Energy Absorption of Impact Dampening “Shock-Absorber” Seals
Cylinder
Bore
Inch-Pounds of
Kinetic Energy
Absorbable
*Pounds Stoppable at Following Speeds
12 in/sec
24 in/sec
36 in/sec
48 in/sec
60 in/sec
3/4"
1-1/8"
1.5
3
8
16
2
4
0.8
1.8
0.41
1
0.23
.59
* Pounds must include weight of piston and rod assembly.
Chart 2
Effect of Impact Dampening Seals on Total Stroke of Cylinder
Reduction in inches of total stroke at following psi pressures
20
40
60
80
100
Cylinder
Bore
0
3/4"
1-1/8"
.11
.12
.08
.09
.05
.06
.03
.04
.01
.02
0
0
NOTE: The above figures are for new cylinders. The impact dampening seals will take some compression set during
operation of the cylinder and the stroke loss will decrease. Also, the pressure at zero stroke loss will decrease to about
80 psi. At pressures above those of zero stroke loss, a slight clicking sound will be produced during impact.
Chart 3
Summary of Sound Levels in Decibles
With 95 psi Air Peak
Sound Pressure Level +
Cylinder Model
TF — 3/4" x 1-1/8"
ETF — 3/4" x 1-1/8"
With 50 psi Air Peak
Sound Pressure Level +
End+ +
Side+ +
End+ +
Side+ +
99
84
107
86
100
87
108
87
+ Peak sound pressure is given in decibels (dB) re: 2 x 10-5 N/m2.
++ End position of mike was located 3 ft. on centerline from end of cylinder; side position of mike was located 3 ft.
perpendicular to centerline abeam of end of cylinder.
The total noise emitted will depend on the structure to which the cylinder is attached. If it is mounted on a thin flat plate
of considerable area, the noise will be increased by a sounding board effect.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-5-5
Series T, ET, VT (3/4" Bore, 5/16" Rod)
Flush Mount – TF, VTF, ETF
Standard Cylinder (TNM, VTNM, ETNM)
4
.63 (16)
U + Stroke
T + Stroke
1 (25) sq.
.25 (6)
4
1
3
.56
(14)
1
3
.75 (19)
.25 (6)
1/8 NPT
.44 (11)
5/16 – 18
2
.13 (3)
.75 (19)
.19 (5)
.25 (6)
Drilled & C'Bored for #6 Soc. Hd. Screw
.5 (13)
Rear Flange Mount – TFC, VTFC, ETFC
Z + Stroke
4
.69 (18)
2
.25 (6)
Front Flange Mount – TFR, VTFR, ETFR
Y + Stroke
.25 (6)
3
V + Stroke
4
1
1
2
(51)
1.5
(38)
2 (51)
1 (25)
1.5
(38)
3
1 (25)
.31 (8)
.31 (8)
2
2
Nose Mount – TSR, VTSR, ETSR
Clevis Mount – TC, VTC, ETC
W + Stroke
X + Stroke
4
.81 (21)
4
.38 (10)
1
3
.25 (6)
.31 (8)
.38 (10)
1
3
3/4–16
2
.44 (11)
Head Trunnion Mount* – THT, VTHT, ETHT
+.000
Dia. .499 - .002
.75
(19)
2
1/4 Ream
.13 (3)
.63 (16)
Back Trunnion Mount* – TBT, VTBT, ETBT
1/8" Max.
Radius
1/8" Max.
Radius
1.5 (38)
.75
(19)
R
.38 (10)
S + Stroke
T + Stroke
.75 (19)
*Configured as special at factory
Series T: Quad Ring Seals
Series VT: Block-Vee Seals
Series ET: Ecology Seals
R
S
T
U
V
W
X
Y
Z
Series T
.44 (11)
2.81 (71)
1.81 (46)
1.94 (49)
1.38 (35)
2.63 (67)
2.56 (65)
2.5 (64)
2.38 (60)
Series ET & VT
.44 (11)
3.19 (81)
2.19 (56)
2.31 (59)
1.75 (45)
3 (76)
2.94 (75)
2.88 (73)
2.75 (70)
NOTE: For spring return cylinders add an additional stroke
length to dimensions.
ACT-5-6
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
.75
(19)
+.000
Dia. .499 - .002
1.5 (38)
.75
(19)
Series T, ET, VT (1-1/8" Bore, 5/16" and 3/8" Rods)
Flush Mount – TF, VTF, ETF
Standard Cylinder (TNM, VTNM, ETNM)
U + Stroke
4
T + Stroke
B
1.38 (35) sq.
.63
(16)
4
.25 (6)
1
1
.75
(19)
dia.
3
V + Stroke
3
.88 (22)
A
1/8 NPT
.25 (6)
C
.13 (3)
2
.75 (19)
.25 (6)
.25 (6)
2
.5 (13)
Front Flange Mount – TFR, VTFR, ETFR
Rear Flange Mount – TFC, VTFC, ETFC
Drilled & C'Bored for #10 Socket Screw
Z + Stroke
Drilled & C'Bored for #10 Socket Screw
Y + Stroke
.25 (6)
4
.25 (6)
4
1
1
3
2.38
(61)
1.88
(48)
2.38 (61)
3
1.38 (35)
.31 (8)
.31 (8)
1.38 (35)
1.88
(48)
2
2
Clevis Mount – TC, VTC, ETC
Nose Mount – TSR, VTSR, ETSR
W + Stroke
X + Stroke
.44 (11)
.81 (21)
4
.5
(13)
1
3
4
.38 (10)
.31 (8)
1
3
3/4–16
.44
(11)
2
1/4 Ream
.13 (3)
2
.81 (21)
Back Trunnion Mount *– TBT, VTBT, ETBT
Head Trunnion Mount* – THT, VTHT, ETHT
.75
(19)
1/8" Max.
Radius
.75
(19)
+.000
Dia. .499 - .002
1/8" Max.
Radius
.38 (10)
.75
(19)
S + Stroke
.75
(19)
1.5 (38)
.75
(19)
R
5/16-18
.63 (16)
.25 (6)
1.5 (38)
.75
(19.
.38 (10)
T + Stroke
Piston Rod
5/16 Diameter
3/8* Diameter
A
B
C
+.000
Dia. .499 - .002
3/8-24
.75 (19)
.31 (8)
* 3/8" dia. piston rod will be furnished as an option only if
specified.
Brookville, OH USA
R
S
T
U
V
W
X
Y
Z
SeriesT
.44 (11)
2.81 (71)
1.81 (46)
1.94 (49)
1.31 (33)
2.63 (67)
2.63 (67)
2.5 (64)
2.38 (60)
Series ET, VT
.44 (11)
3.19 (81)
2.19 (56)
2.31 (59)
1.69 (43)
3 (76)
3 (76)
2.88 (73)
2.75 (70)
NOTE: Series T, ET & VT 1-1/8" Bore Cylinders are available with adjustable
cushions. Increase dimensions T through Z by 9/16" for one cushion and by
1-1/8" for both ends cushioned. (See “Ordering Procedure” for details.) For
spring return cylinders add an additional stroke length to above dimensions.
Phone 937-833-4033
www.norgren.com
ACT-5-7
Series DT, EDT, VDT (Double Rod End)
3/4 Bore
1-1/8 Bore
Standard Cylinder (DTNM, VDTNM, EDTNM)
4
W + Stroke
Standard Cylinder (DTNM, VDTNM, EDTNM)
4
W + Stroke
1 (25)
3
Stroke
1.38
(35)
.63
(16)
1
(25)
.25 (6)
.25 (6)
1/8 NPT
.44 (11)
.44 (11)
2
.75
(19)
dia.
1.38
(35)
.25 (6)
.75 (19)
.13 (3)
1/8 NPT
.25 (6)
.75 (19)
.75 (19)
C
A
.75 (19)
.13 (3)
2
.13 (3)
Flush Mount – DTF, VDTF, EDTF
.56 (14)
X + Stroke
.63 (16) + Stroke
.88
(22)
.19 (5)
.19 (5)
.25 (6)
.25 (6.4)
1.38 (35)
.25 (6)
Drilled & C'Bored
for #10 Socket
Screw (4 Holes)
.25 (6)
Front Flange – DTFR, VDTFR, EDTFR
Front Flange – DTFR, VDTFR, EDTFR
2
(51)
X + Stroke
.56 (14) + Stroke
.69
(18)
Drilled & C'Bored
for #10 Soc. Hd. Screw
A
.13 (3)
Flush Mount – DTF, VDTF, EDTF
.63 (16)
Drilled & C'Bored
for #6 Soc. Hd.
Screw (4 Holes)
Y + Stroke
Y + Stroke
.38 (10) + Stroke
.38 (10) + Stroke
1.5
(38)
2.38
(61)
1.88
(48)
.31 (8)
.31 (8)
Drilled & C'Bored
for #10 Socket Screw
Nose Mount – DTSR, VDTSR, EDTSR
Nose Mount – DTSR, VDTSR, EDTSR
.81 (21)
W + Stroke
.81 (21)
.38 (10) + Stroke
.13 (3)
3/4-16
3/4-16
.56 (14)
W + Stroke
.38 (10) + Stroke
.13 (3)
.56 (14)
Trunnion Mount *– DTHT, VDTHT, EDTHT
Dia. .499 +.000
Ø - .002
1/8" Max. Radius
Trunion Block
Construction
One piece
Cast Ductile Iron
.75 (19)
S + Stroke
Piston Rod
5/16 Diameter
3/8* Diameter
A
B
C
5/16-18
.63 (16)
.25 (6)
3/8-24
.75 (19)
.31 (8)
* 3/8" dia. piston rod will be furnished as an option only if
specified.
ACT-5-8
B
1
3
1
.75
(19)
dia.
Stroke
Brookville, OH USA
.44 (11) + Stroke
DT
S
W
X
Y
2.81
2.06
1.69
2.38
.75
(19)
1.5 (38)
3/4" Bore
VDT & EDT
(71)
(52)
(43)
(60)
3.19
2.44
2.06
2.75
(81)
(62)
(52)
(70)
.75
(19)
DT
2.81
2.06
1.56
2.38
1-1/8" Bore
VDT & EDT
(71)
(52)
(40)
(60)
3.19
2.44
1.94
2.75
(81)
(62)
(49)
(70)
NOTE: Series DT, VDT & EDT 1-1/8" bore cylinders are available with
adjustable cushions. Increase dimensions S through Y by 9/16" for one
cushion and by 1-1/8 for both ends cushioned.
Phone 937-833-4033
www.norgren.com
Pin
Rod Clevis (includes pin)
.25 (6)
.75 (19)
dia.
.25 (6)
Ream
.31 (8)
1.31
(33)
.75 (19)
.68
(17)
1.56
(40)
.94 (24)
Part Number – 49085
(includes snap rings)
A
Part Number
40035
40036
Thread
5/16-18
3/8-24
Rod Eye
.75 (19)
dia.
Mounting Screw
.25 (6)
Ream
.31 (8)
1.25
(32)
.68
(17)
1.31
(33)
1.56
(40)
6-32 Th'd
Used on model TF, VTF, and ETF 3/4"
bore actuators
A
Part Number
40042
40043
Thread
5/16-18
3/8-24
Clevis Bracket (includes pin)
ion – 1-1/8" Bor
o ta t
e
0R
ion– 3/4" Bor Mod
10 Rotat
eM
e
0
od l C
15
el
C
Mounting Nut
1.12
(28)
.75 (19)
dia.
.31 (8)
1.26 (32)
.72
(18)
.88 1.12
(28)
.38 (22)
(19)
.42
(11)
Used on model TSR, VTSR, ETSR
actuators
1.03
(26) sq.
#8 C-Bore
1.37 (35) sq.
Rod Aligners (includes jam nut)
1.25 (32)
1/16" Lateral
Misalignment
2° Angular
Misalignment
F
E
D
B
A
C
Brookville, OH USA
PN
Thread
RA-25
1/4-28
A
B
C
D
E
F
1 (25)
1.38 (35)
2.13 (54)
.5 (13)
.75 (19)
.16 (4)
Phone 937-833-4033
Rod Aligners
RA-31C
5/16-18
1 (25.4)
1.38 (35)
2.13 (54)
.5 (13)
.75 (19)
.19 (5)
RA-32
5/16-24
RA-38
3/8-24
1 (25)
1.38 (35)
2.13 (54)
.5 (13)
.75 (19)
.19 (5)
1 (25)
1.38 (35)
2.13 (54)
.5 (13)
.75 (19)
.22 (6)
www.norgren.com
ACT-5-9
Reed Switches
Reed Switch Quick Reference Chart
PS01-B and PS04-B are compact and low profile switches
when mounted on the cylinder tie rods. Each switch has a
plug allowing electrical disconnection without removing or
changing the adjustment of the switch on the cylinder.
Reed switches are constructed of two overlapping
ferromagnetic reeds (nickel-iron) which are hermetically
sealed in a glass tube with the ends aligned and a small
gap between them.
When an external magnetic force is applied, the reeds
assume opposite polarity and the ends of the reeds are
mutually attracted and contact, completing the circuit.
Due to the light weight and small gap, very fast action is
obtained. They will close in 2 ms and release in 0.1 ms.
Caution should be observed when using reed switches in
sensitive circuits since they can introduce noise into the
circuit due to bounce and vibration occurring from the
mechanical closing of the reeds.
Reed switches require a magnetic material (located in the
piston) with a polarity that is axial in orientation to actuate
the switch.
Switch
Part
Number
S.P./S.T.
*50
N.O.
S.P/S.T.
PS04-B
*50
N.O.
PS01-B
Repeatability
Vibration resistance
Shock resistance
Minimum magnetic
field to actuate
Maximum switch current
Voltage range
Maximum switch power
5-250
Yes
.03
Yes
Yes
114"
*3 Amp
0-250
No
.03
No
Yes
114"
PS01-B Switch & Bracket
For Tiny Tim Cylinders
PS04-B Switch & Bracket
For Tiny Tim Cylinders
Part #
Fits
Part #
Fits
PS01-B7T
PS01-B11T
3/4" Bore
1-1/8" Bore
PS04-B7T
PS04-B11T
3/4" Bore
1-1/8" Bore
How to Order
ETF-2 PS01-B 7T (22) 3/4 x 5
Switch Positions
Switch and Bracket Assy.
Quantity
Operating Time
*1 Amp
*For inductive loads use 70% of the ratings.
Note: Cylinders modified for use with a reed switch will
have a magnetic strip on the piston in place of the
Teflon ® wear strip.
Working Temperature
Type
Max. Max. Switch Voltage
VA
Current
Range
Wire
(Watt) Resistance AC-DC Light Hysteresis Varistor Plug-In Length
Min. -20°F (°C)
Max. 175°F (°C)
On 2 ms
Off .1 ms
.015 inch
50 to 1000 Hz
50g
85 gauss (axial)
How to Order
ETF-PS-3/4 x 5
Piston modification
only (no switch)
BROWN
(+)
RED
see chart
see chart
30W
WHITE
(–)
(BLACK)
Note: A piston modified for a reed switch will not work with
a hall effect switch.
PS01-B, PS04-B
A
C
B
Series
Bore
A
B
T
VT
ET
.75 (19)
.94 (24)
1.77 (45)
1.13 (29)
1.06 (27)
2.56 (65)
C
1.94 (49)
NOTE: PS Option add 1/2" to overall length of cylinder.
ACT-5-10
Series
Min. Stroke
Min. Stroke
(2) Switches Same Side
T
VT & ET
.75 (19)
.56 (14)
2 (51)
1.63 (41)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Hall Effect Switch Quick Reference Chart
Hall Effect Switches
Hall effect switches are a non-mechanical switch (no
moving parts), which take the supply current and place it
within a magnetic field, generating a voltage output.
Hall effect switches are continually on, operating at a low
voltage level (low ground), until the internal magnetic field
is disturbed by the switch actuating magnetic. The built-in
amplifier then boosts the output signal to a usable level.
SInce there are no moving parts, hall effect switches can
operate in sensitive areas without sending interference or
noise into the circuit.
Hall effect switches require a magnetic material (located
on the piston) with a polarity that is longitudinal in
orientation to actuate the switch.
Note: A piston modified for a hall effect switch will not
work with a reed switch.
Switch
Part
Number
Max. Max. Switch Voltage
VA
Current
Range
Wire
(Watt) Resistance
DC
Light Diode Plug-In Length
Type
N.O.
Sourcing
(PNP)
N.O.
Sourcing
(PNP)
HS1
HS2
Sinking
(NPN)
HS3
30
*1 Amp
5-24
No
Yes
No
108"
30
*1 Amp
5-24
Yes
Yes
No
108"
30
*1 Amp
5-24
No
Yes
No
108"
*For inductive loads use 70% of the ratings.
HS1 Switch & Bracket
Working Temperature
Min. 23°F (°C)
Max. 257°F (°C)
On 2 ms
Off .1 ms
.001 inch
5 to 1000 Hz
30g @ 11 ms
85 gauss (longitudinal)
Operating Time
Repeatability
Vibration resistance
Shock resistance
Minimum magnetic
field to actuate
Part #
Fits
Part #
Fits
Part #
Fits
HS1-7T
HS1-11T
3/4" Bore
1-1/8" Bore
HS2-7T
HS2-11T
3/4" Bore
1-1/8" Bore
HS3-7T
HS3-11T
3/4" Bore
1-1/8" Bore
RED
LOAD
How to Order
ETF-2 HS2-7T (22) 3/4 x 5
Switch Positions
Switch and Bracket Assy.
Quantity
RED
5-24 VDC
WHITE
LOAD
5-24 VDC
WHITE
BLACK
BLACK
HS1, HS2-SOURCING
(PNP)
HS3-SINKING
(NPN)
How to Order
ETF-HS-3/4 x 5
Piston modification only
(no switch)
A
C
B
Series
Bore
A
B
T
VT
ET
.75 (19)
.94 (24)
1.81 (46)
1.13 (29)
1.06 (27)
2.19 (56)
C
1.78 (45)
NOTE: PS Option add 1/2" to overall length of cylinder.
Min. Stroke
(2) Switches Same Side
Series
Min. Stroke
T
VT & ET
.75 (19)
2.5 (64)
.56 (14)
2.44 (62)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-5-11
T, VT, and ET Product Ordering Information
V T S R
3/
8
R C
1
5
6
2
3
4
7
–
E N
8
8
– 3/4
x 5
9
10
Single Rod End Models
T = Quad ring piston seal, block – vee rod seal
VT = Block-vee piston and rod seals
ET = Impact dampening piston seals and block-vee rod seal
Double Rod End Models
DT = Quad ring piston, block – vee rod seal
VDT = Block-vee piston and rod seals
EDT = Impact dampening piston seals and block-vee rod seal
Mounting Styles
F = Flush mount
C - CLevis mount
SR = Nose mount
FC = Rear flange mount
FR = Front flange mount
HT = Head trunnion mount
BT = Back trunnion mount
Rod Diameter
Specify 5/16" or 3/8"
Single Acting Cylinders (3/4" and 1-1/8" bore cylinders)
SR = Spring on rod end (spring retracts rod).
SC = Spring on cap end (spring extends rod).
Notes: Cylinder requires a stop tube equivalent to the stroke length.
Cushions not avilable on spring end of cylinder.
Standard spring forces for SR and SC = 3.5 lbs relaxed, 11.5
lbs compressed
Cushions
R = Rod end cushion
C = Cap end cushion
RC = Both ends cushioned
Notes: Available on 1-1/8" bore cylinders only.
1/4" effective cushion length.
Add 9/16" to overall length of cylinder for each cushion.
Cushion not available on spring end of a single acting cylinder.
Options
A = T and VT stroke adjustment. (Specify length of adjustment)
AA = ET stroke adjustment (specify length of adjustment) Note: This
option adds 1/2" to overall cylinder length.
EN = Electroless nickel plating (includes option S).
*†EV = Pneulectric valve (specigy position 1, 2, 3, or 4)
*L = Port location other than standard. (Specify location)
PR = Plain rod, no thread
RX = Rod extension over standard. (Specify length)
S = Stainless steel tie rods and nuts.
SS = Chrome-plated stainless steel piston rod.
*†SV = Stroke signal valve. (specify position 1, 2, 3, or 4)
TX = Rod thread extension over standard (specify length)
V = Viton® seals. -20° to 350°F temperature range.
Bore (Specify 3/4" or 1-1/8")
Stroke (inches)
* Designate head position first, and cap position last
† Not available on 3/4" and 1-1/8" bore Series T
ACT-5-12
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
NFPA interchangeable Tiny Tim Air Actuators
Series TA, TAV, TAE
1 Heads and Caps: Corrosion resistant
alloy
iron bushing.
3 Rod Seal: Carboxulated Nitrile
Block-vee for maximum life and
efficiency.
4 Piston and Rod Assembly: Full
diameter thread into the piston, secured
with red Loctitie® to resist shock and
vibration.
5 Tie Rods: Pre-stressed to maintain
rigidity. Tie rod nuts are recessed into
the head or caps for compactness and
clean appearance.
steel. Milled wrench flats and full
diameter thread for maximum rod
strength. 303 hard chrome plated
stainless steel available at extra cost.
7 Tube: Hard anodized
aluminum tube with micro-inch
finish for low breakaway and
long seal life.
8 Impact Dampening Seals:
Impact dampening seals specifically
designed piston incorporated
energy absorbing seals to dissipate
the forces generated during impact
without increasing envelope
dimensions. Not available for
cylinders with oversize rods. Not
recommended for applications that
require 100% repeatable stroke
increments, or for applications that
exceed the pounds stoppable
capacities shown on ACT-5-14 at
the various recommended piston
speeds.
Series TAE
Series TAE features impact dampening
piston design.
4
1
2
6
3
8
7
Series TA
Quad Ring piston design
Brookville, OH USA
5
Series TAV
Block-V piston design
Phone 937-833-4033
www.norgren.com
ACT-5-13
NFPA Interchangeable
TA, TAV, TAE Actuators
● 3/4", 1", and 1-1/8" bore
● Designed to conform with NFPA (T3.6.11) 1972, and
interchange with Tom Thumb’s Series A and AV
mounting dimensions.
Minimum Breakaway Pressures (PSIG)
Non-cushioned cylinders, mounted horizontally with no
load on the piston rod.
Cylinder Bore
(inches)
3/4"
1", 1-1/8"
Model
Medium:
Compressed air, filtered, lubricated
or non-lubricated
PSIG
Operation:
Double acting
Series TA
12 (DTA-15)
Series TAE-TAV 8 (DTAE, DTAV-11)
Series TA
7 (DTA-11)
Series TAE-TAV 5 (DTAE, DTAV-9)
Operating Pressure:
150 PSI (10 bar)
-20° to 200°F (-29° to 107°C)
Temperatures
Buna N Seals: -20° to 200°F (-29° to 107°C)
Effective Piston Areas
To determine approximate force/lb multiply area by
applicable pressure
Bore
3/4"
1"
1-1/8"
Head End*
.393 sq. in.
.917 sq. in.
.884 sq. in.
Cap End
.442 sq. in.
.994 sq. in.
.994 sq. in.
Energy Absorption Capacity of Impact Dampening Seals
Size
3/4"
1"
1-1/8"
In./Lbs of
Pounds* Stoppable at Following Speeds
Kinetic Energy
6
12
24
36
48
60
Absorbable in/sec in/sec in/sec in/sec in/sec in/sec
1.5
32.4
8.0
2.0
.8
.41
.23
3
79.2
16
4
*Pounds must include piston and rod assembly weight
* With standard rods
ACT-5-14
Cylinder Diameters:
Nominal Inch:
3/4", 1-1/8"
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
1.8
1
.59
Series TA NFPA Interchangeable Tiny Tim Actuators
Bore
3/4
1*
1-1/8
BC
CC
D
DB
DN
E
EW
KM
N
NT
R
RM
RM1
RT
SD
SN
TF
TN
UF
1.06 (27)
1/4-28
.22 (6)
8-32
.63 (16)
1 (25)
.25 (6)
5/8-18
.75 (19)
8-32 x 3/16 DP
.5 (13)
.63 (16)
.69 (18)
8-32 x 1/4 DP
1.31 (33)
1.31 (33)
1.5 (38)
.63 (16)
2 (51)
1.41 (36)
5/16-24
.25 (6)
10-32
.88 (22)
1.38 (35)
.38 (10)
3/4-16
1 (25)
10-32 x 1/4 DP
.88 (22)
.75 (19)
.81 (21)
8-32 x 1/4 DP
1.25 (32)
1.25 (32)
1.88 (48)
.88 (22)
2.38 (60)
1.59 (40)
3/8-24
.31 (8)
10-32
1 (25)
1.5 (38)
.38 (10)
3/4-16
1.13 (29)
10-32 x 1/4 DP
1 (25)
.75 (19)
.81 (21)
10-32 x 1/4 DP
1.25 (32)
1.25 (32)
2 (51)
1 (25)
2.5 (64)
* Piston Dia. of 1" cylinders is 1-1/8" diameter.
Style 2 – (MS8) Side Through Holes
RM (Dia.)
1/8 NPT
(not available w/oversized rod)
Style 1 – (MS9) Side Tapped
RM (Dia.)
1/8 NPT
CC (Thread)
.25 (6)
4
2
.63 (16)
.5 (13)
.25 (6)
.75 (19)
3
.13 (3)
2
DN
1.75 (45) + Stroke
2.13 (54) + Stroke
NT (Thread)
(2 in head, 1 in cap)
Style 3 – (MNR1) Threaded Male Rabbet*
+.000
–.003
RM1
(Dia.)
CC (Thread)
1/8 NPT
KM (Thread)
1
.25 (6)
4
.25
(6)
.5 (13)
.75 (19)
2
.63 (16)
3
.13 (3)
D (Flat)
E
.63 (16)
1.75 (45) + Stroke
2.63 (67) + Stroke
3
RM
E
+.000
–.003
RT (Thread)
(4 Holes)
(Dia.)
CC (Thread)
1/8 NPT
.63 (16)
1
4 D (Flat)
.25 (6)
SD + Stroke
.25 (6)
E
1.75 (45) + Stroke
2.13 (54) + Stroke
.25 (6)
.89 (23) Dia.
1/4 Dia.
.25
(6)
4
.13 (3)
.75 (19)
.75
(19)
E
.5 (13)
D (Flat)
N
E
.218 (5) Dia (4 Holes)
RM (Dia.)
CC (Thread)
1/8 NPT
EW
1
E
.44 (11)
1.75 (45) + Stroke
3
.13 (3)
Style 7 – (MF2) Cap Rectangular Flange
2
.31 (8)
.25 (6)
.75 (19)
1.75 (45) + Stroke
2.13 (54) + Stroke
3
E
BC
.5 (13)
1/8 NPT
2
.63 (16)
.25 (6)
1
.63
(16)
4
DB (Three holes for
Sockethead Capscrew)
Style 4 – (MP3) Cap Eye
D (Flat)
RM (Dia.)
CC (Thread)
E
Style 5 – (MR1) Head Male Rabbet
1
.13 (3)
.75 (19)
D (Flat)
TN
.25 (6)
SN + Stroke
E
CC (Thread)
.25 (6)
.5 (13)
E
1
2.88 (73) + Stroke
.25 (6)
4
2
R E
Style 6 – (MN1) Threaded Nose
CC (Thread)
1/8 NPT
KM (Thread)
.75 (19)
D (Flat)
.13 (3)
E
1.75 (45) + Stroke
2.38 (60) + Stroke
E
TF
UF
.63 (16)
.25 (6)
.75 (19)
2
3
.63 (16)
.25 (6)
.5 (13)
4
.5 (13)
.25 (6)
1
3
.63 (16)
D (Flat)
1.75 (45) + Stroke
Style 9 – (MF7) Head Flange (No pilot)
E
2.63 (67) + Stroke
.218 (5) Dia (4 Holes)
Style 8 – (MF1) Head Flange
1/8 NPT
+.000
–.003
RM
CC (Thread)
1/8 NPT
(Dia.)
CC (Thread)
.25 (6)
1
.218 (5) Dia (4 Holes)
1
.25 (6)
2
4
4
.13 (3)
.25 (6)
.5 (13)
.75 (19)
1.75 (45) + Stroke
2.38 (61) + Stroke
.63 (16)
.25 (6)
.13 (3)
2
R E
R
3 D (Flat)
E
TF
UF
Brookville, OH USA
.5 (13)
.75 (19)
.63 (16)
3
D (Flat)
.25 (6)
1.75 (45) + Stroke
2.38 (61) + Stroke
E
TF
UF
Phone 937-833-4033
www.norgren.com
ACT-5-15
Series TAE & TAV NFPA Interchangeable Tiny Tim Actuators
Bore
3/4
AM
BC
CC
CD
D
DB
DN
E
EW
KM
N
NT
R
RM
RM1
RT
SD
SN
TF
TN
UF
ZG
1*
.63 (16)
1.06 (27)
1/4-28
.25 (6)
.22 (6)
8-32
.63 (16)
1 (25)
.25 (6)
5/8-18
.75 (19)
8-32 x 3/16 DP
.5 (13)
.63 (16)
.69 (18)
8-32 x 1/4 DP
1.81 (46)
1.81 (46)
1.5 (38)
.63 (16)
2 (51)
3.13 (79)
.63 (16)
1.41 (36)
5/16-24
.38 (10)
.25 (6)
10-32
.88 (22)
1.38 (35)
.38 (10)
3/4-16
1 (25)
10-32 x 1/4 DP
.88 (22)
.75 (19)
.81 (21)
8-32 x 1/4 DP
1.75 (45)
1.75 (45)
1.88 (48)
.88 (22)
2.38 (60)
3.13 (79)
.88 (22)
1.59 (40)
3/8-24
.38 (10)
.31 (8)
10-32
1 (25)
1.5 (38)
.38 (10)
1-14
1.13 (29)
10-32 x 1/4 DP
1 (25)
.75 (19)
1.06 (27)
10-32 x 1/4 DP
1.75 (45)
1.75 (45)
2 (51)
1 (25)
2.5 (64)
3.38 (86)
CC (Thread)
RM (Dia.)
1/8 NPT
1-1/8
E
1
.25 (6)
4
.63 (16)
.5 (13)
.25 (6)
.75 (19)
TN
.25 (6)
SN + Stroke
NT (Thread)
(2 in head, 1 in cap)
2.25 (57) + Stroke
2.63 (67) + Stroke
RM (Dia.)
1/8 NPT
2
.25 (6)
.75 (19)
D (Flat)
E
.25 (6)
SD + Stroke
E
4
.13 (3)
2.25 (57) + Stroke
2.63 (67) + Stroke
DB (Three holes for
1/8 NPT
RM1
+.000
–.003
(Dia.)
KM (Thread)
CC (Thread)
1
.25 (6)
4
.75 (19)
2
.63 (16)
3
AM
E
.13 (3)
E
D (Flat)
2.25 (57) + Stroke
ZG + Stroke
CD
3
.63 (16)
.5 (13)
57/64 Dia.
1
DN
.25
(6)
CC (Thread)
D (Flat)
RM (Dia.) 1/8 NPT
(not available w/oversized rod)
CC (Thread)
.25 (6)
.5 (13)
E
3 D (Flat)
.13 (3)
Style 4 – (MP3) Cap Eye
2
4
1
3
.75
(19)
RT (Thread)
(4 Holes)
E
RM
1/8 NPT
+.000
–.003
(Dia.)
CC (Thread)
.25
.63 (16) (6)
.13 (3)
.75 (19)
2
.31 (8)
.25 (6)
EW
.5 (13)
.25 (6)
4
E
.44 (11)
2.25 (57) + Stroke
.5 (13)
KM (Thread)
CC (Thread)
.25 (6.)
.63 (16)
2
N
E
1/8 NPT
.218 (5) Dia (4 Holes)
RM (Dia.)
E
CC (Thread)
3
AM
D (Flat)
.13 (3)
Style 7 – (MF2) Cap Rectangular Flange
4
.25 (6)
.75 (19)
2.25 (57) + Stroke
2.63 (67) + Stroke
1
.75 (19)
.25 (6)
.25 (6)
.25 (6)
.75 (19)
R E
CC (Thread)
.25 (6)
CC (Thread)
.63 (16)
2
.13 (3)
R E
.25 (6)
3
E
TF
UF
Brookville, OH USA
.5 (13)
.75 (19)
.63 (16)
3
D (Flat)
.25 (6)
E
TF
UF
2.25 (57) + Stroke
2.63 (68) + Stroke
Phone 937-833-4033
1
4
.13 (3)
D (Flat)
.25 (6)
.218 (5) Dia (4 Holes)
1/8 NPT
1
4
.25 (6)
ACT-5-16
2
D (Flat)
E
TF
UF
.218 (5) Dia (4 Holes)
RM (Dia.)
2.25 (57) + Stroke
2.88 (73) + Stroke
R E
3
.63 (16)
.13 (3)
2.25 (57) + Stroke
2.88 (73) + Stroke
.75 (19)
2
E
.5 (13)
.5 (13)
1
4
D (Flat)
2.25 (57) + Stroke
ZG + Stroke
1/8 NPT
E
3
.63 (16)
.25 (6)
.5 (13)
2
BC
3.38 (86) + Stroke
1/8 NPT
1
www.norgren.com
Tiny Tim Series NFPA Interchangeable Actuators
Bore
3/4
Series
A
AM
B
BC
CC
D
DB
DN
E
KM
LB
N
NT
R
RM
RM1
RT
SD
SN
TF
TN
UF
ZB
ZR
ZT
1*
1-1/8
DTAEDTAEDTA
DTA
DTAV
DTAV
1.75 (45)
1.88 (48)
.63 (16)
.63 (16) .88 (23)
2.13 (54)
2.25 (57)
1.41 (36)
1.59 (40)
5/16-24
3/8-24
.25 (6)
.31 (8)
10-32
10-32
.88 (22)
1 (25)
1.38 (35)
1.5 (38)
3/4-16
3/4-16
1-14
2 (51)
2.5 (64)
2 (51)
2.5 (64)
1 (25)
1.13 (29)
10-32 x 1/4 DP
10-32 x 1/4 DP
.88 (22)
1 (25)
.75 (19)
.75 (19)
.81 (21)
.81 (21) 1.06 (27)
8-32 x 1/4 DP
10-32 x 1/4 DP
2 (51)
2.5 (64)
2 (51)
2.5 (64)
1.5 (38)
2 (51)
1.5 (38)
2 (51)
1.88 (48)
2 (51)
.88 (22)
1 (25)
2.38 (60)
2.5 (64)
2.75 (70) 3.25 (83) 2.75 (70) 3.25 (83)
3.25 (83) 3.75 (95) 3.25 (83) 3.75 (95)
3 (76) 3.5 (89) 3 (76) 3.5 (89)
DTAEDTAV
1.38 (35)
.63 (16)
1.75 (45)
1.06 (27)
1/4-28
.22 (6)
8-32
.63 (16)
1 (25)
5/8-18
2 (51)
2.5 (64)
.75 (19)
8-32 x 3/16 DP
.5 (13)
.63 (16)
.69 (18)
8-32 x 1/4 DP
2.06 (52) 2.56 (65)
1.56 (40) 2.06 (52)
1.5 (38)
.63 (16)
2 (51)
2.75 (70) 3.25 (83)
3.25 (83) 3.75 (95)
3 (76) 3.5 (89)
DTA
CC (Thread)
E
RM (Dia.)
D (Flat)
1/8 NPT
1
.25 (6)
E
(2 Holes)
.63 (16)
.75 (19)
.75 (19)
2
3
.63 (16)
.25 (6)
(1 Hole)
.13 (3)
4
TN
NT (thread)
.13 (3)
.25 (6)
SN + Stroke
LB + Stroke
ZB + 2X Stroke
(Not available with oversize rod)
CC (Thread)
DB (Four holes for
E
RM (Dia.)
DN
1/8 NPT
1
.25 (6)
4
2
E
.38
(10)
.63 (16)
.75 (19)
3 D (Flat)
.63 (16)
.25 (6)
.75
(19)
.25 (6)
.13 (3)
A
SD + Stroke
.5 (13)
B
LB + Stroke
ZB + 2X Stroke
CC (Thread)
RM1 (Dia.)
KM (Thread)
1/8 NPT
1
.25 (6)
CC (Thread)
4
.63 (16)
RT (Thread)
(4 Holes)
RM (Dia.)
1/8 NPT
.25 (6)
.13 (3)
.75 (19)
.75 (19)
LB + Stroke
ZR + 2X Stroke
N
E
4
2
.13 (3)
.75 (19)
.75 (19)
.13 (3.2)
KM (Thread)
RM (Dia.)
1
E
.25 (6)
4
.63 (16)
.13 (3)
.75 (19)
UF
CC (Thread)
RM (Dia.)
.75 (19)
AM
2
.63 (16)
3 D (Flat)
.25 (6.4)
E
E
LB + Stroke
ZR + 2X Stroke
TF
1/8 NPT
E
.25 (6)
UF
R E
CC (Thread)
RM (Dia.)
1/8 NPT
.63 (16)
.25 (6.4)
.75 (19)
CC (Thread)
1/8 NPT
LB + Stroke
ZB + 2X Stroke
.13 (3)
E
3 D (Flat)
.63 (16)
.25 (6)
3 D (Flat)
.63 (16)
.13 (3)
BC
.63 (16)
E
AM
1
.25 (6)
2
.75 (19)
LB + Stroke
ZT + 2X Stroke
.63 (16)
TF
E
D (Flat)
.13 (3)
.218 (5) Dia. (4 Holes)
.25 (6)
R E
.63 (16)
.13 (3)
.13 (3)
.75 (19)
.75 (19)
.63 (16)
LB + Stroke
ZB + 2X Stroke
Brookville, OH USA
Phone 937-833-4033
D (Flat)
.25 (6)
www.norgren.com
.218 (5) Dia. (4 Holes)
ACT-5-17
Pivot Pin
CD
CL
CP
Cyl.
Bore
Cyl.
Series
3/4
1, 1-1/8
1, 1-1/8
All
TA
TAV-TAE
Cyl.
Series
Part
No.
Part
No.
CD
49085 .25 (6)
49086 .25 (6)
49087 .38 (10)
CL
CP
.75 (19)
.88 (22)
.88 (22)
.94 (24)
1.06 (27)
1.06 (27)
Eye Bracket
1.25 (32)
.31 (8)
E
CB
R
Cyl.
Bore
E
3/4
1&
1-1/8
CD (dia.)
.5 (13)
DB (Four Holes For
CD
TA, TAV-TAE 49069 .25 (6)
TA
49070 .25 (6)
TAV-TAE 49071 .38 (10)
CB
DB
E
R
.25 (6)
.38 (10)
.38 (10)
6-32
10-32
10-32
1 (25)
1.38 (35)
1.38 (35)
.75 (19)
1 (25)
1 (25)
FL
CB
Clevis Bracket (includes pin)
FL
CB
E
CB
Cyl.
Bore
R
.5
(13)
.5
(13)
CD (dia.)
DB (Four Holes For
E
3/4
1&
1-1/8
Cyl.
Series
Part
No.
E
R
TA, TAV-TAE 49072 1 (25)
.75 (19) 1.19 (30) .25 (6)
TA
49073 1.38 (35) 1 (25) 1.25 (32) .38 (10)
TAV-TAE 49074 1.38 (35) 1 (25) 1.25 (32) .38 (10)
CD
DB
.25 (6)
.25 (6)
.38 (10)
6-32
10-32
10-32
Rod Eye
CB
CD (dia.)
CB
.44 (11)
.44 (11)
(Full Thread)
J
Cyl.
Series
3/4
TA, TAV-TAE
TA
TAV-TAE
TA
TAV-TAE
1
1 (25)
dia.
CC (Thread)
Cyl.
Bore
1-1/8
Part
No.
CC
49075 1/4-28
49076 5/16-24
49077 5/16-24
49078 3/8-24
49079 3/8-24
CD
CB
I
J
.25 (6)
.25 (6)
.38 (10)
.25 (6)
.38 (10)
.25 (6)
.38 (10)
.38 (10)
.38 (10)
.38 (10)
.5 (13)
.75 (19)
.75 (19)
.75 (19)
.75 (19)
.31 (8)
.44 (11)
.44 (11)
.44 (11)
.44 (11)
Rod Clevis (includes pin)
G (dia.)
CB
CD (dia.)
CB
K
ACT-5-18
Cyl.
Series
Part
No.
CB
CD
F
G
K
CC
3/4
TA, TAV-TAE
TA
TAV-TAE
TA
TAV-TAE
49080
49081
49082
49083
49084
.25 (6)
.38 (10)
.38 (10)
.38 (10)
.38 (10)
.25 (6)
.25 (6)
.38 (10)
.25 (6)
.38 (10)
.44 (11)
.56 (14)
.56 (14)
.56 (14)
.56 (14)
.75 (19)
.88 (22)
.88 (22)
.88 (22)
.88 (22)
.19 (5)
.25 (6)
.25 (6)
.25 (6)
.25 (6)
1/4-28
5/16-24
5/16-24
3/8-24
3/8-24
.5 (13)
.13 (3)
CC (Thread)
Cyl.
Bore
F (dia.)
1
1-1/8
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Rod Aligners (includes jam nut)
2° Angular
Misalignment
CC
(Th'd)
1.25 (32)
1/16" Lateral
Misalignment
F
E
D
CC
(Th'd)
B
A
C
Model
A
RA-25
RA-32
RA-38
RA-44
RA-50
1 (25)
1 (25)
1 (25)
1.5 (38)
1.5 (38)
Oversize Rods – Optional Rod End Styles
Bore
CC
A
.25 (6)
C
D
1.38 (35) 2.13 (54) .5 (13)
1.38 (35) 2.13 (54) .5 (13)
1.38 (35) 2.13 (54) .5 (13)
1.78 (45) 3 (76)
.69 (18)
1.78 (45) 3 (76)
.69 (18)
E
F
CC
.75 (19)
.75 (19)
.75 (19)
1.22 (31)
1.22 (31)
.16 (4)
.19 (5)
.19 (5)
.22 (6)
.25 (6)
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
Rod
Size
MM
CC
(Style A)
A
KK
(Style B)
D
RM
1
2
2
4
3
4
.25 (6)
.31 (8)
.31 (8)
.5 (13)
.38 (10)
.5 (13)
1/4-28
5/16-24
5/16-24
1/2-20
3/8-24
1/2-20
.63 (16)
.63 (16)
.63 (16)
.75 (19)
.63 (16)
.75 (19)
10-32
1/4-28
1/4-28
7/16-20
5/16-24
7/16-20
.22 (6)
.25 (6)
.25 (6)
.44 (11)
.31 (8)
.44 (11)
.63 (16)
.63 (16)
.75 (19)
.75 (19)*
.75 (19)*
.75 (19)*
KK
3/4"
A
MM
B
MM
.25 (6)
RM
1"
RM
1-1/8"
Note: Oversize rods are not
available in Style 2, sizes 3/4"
and 1" due to interference with
the rod gland.
See ACT-5-20 for cylinders
equipped with modified rods or
other optional equipment.
* RM (Dia.) on Series TAV and DTAV 1" & 1-1/8" Sizes in Mounting Styles 5 and 8 is 1".
Optional Equipment
High temperature seals
Available for all seals and bore sizes when normal service
requires the cylinder to operate at ambient temperatures
ranging above 200° to 350°F ( 93° to 177°C). Specify Viton.
Single Acting, Spring Return Actuators
Available for all Series and bore sizes. Add two times working
stroke to envelope dimensions shown on ACT-5-16/17
Adjustable Cushions
Insert type adjustable cushions are available when required.
Add 1/2" to cylinder length per cushioned end.
Note: Not available with 1/2" diameter rods.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-5-19
NFPA Product Ordering Information
T A 6
3/
8
A D R E N
3/
4
x5
1
4
5
10
11
2
3
6
7
8
9
Series
Stroke
Standard Single Rod End Models
TA = Quad ring piston seal, Block-V rod seal
TAV - Block-V piston and rod seals
TAE = Impact dampening piston seals,
Block-V rod seal
Standard Double Rod End Models
DTA = Quad ring piston seal, Block-V rod seals
DTAV - Block-V piston and rod seals
DTAE = Impact dampening piston seals,
Block-V rod seal
Bore
3/4"
1"
1-1/8"
Mounting Styles
1 = Side Tapped
2 = Side through holes
4 = Cap eye
5 = Head male rabbet
6 = Threaded nose
7 = Cap rectangular flange
8 = Head flange
9 = Head flange (no pilot)
Options
RX = Rod extension (specify length)
TX = Rod thread extension (specify length)
T = Special Rod thread (specify length)
PR = Plain rod end
PS = Magnetic piston**
L = Port location other than standard (specify location)
ST = Stop tube. (specify length and location)
A = Stroke adjust (specify length ofadjustment)
AA = Stroke adjustment (double piston design)
V = Viton seals
SS = Piston Rod (chrome plated stainless steel)
EN = Electroless nickel plating (includes option S)
S = Stainless steel tie rods &nuts
Single Acting Actuators
SR = Spring on Rod End
SC = Spring on Cap End
Rod Diameter (Specify on all models)
1/4"
5/16"
3/8"
1/2"
Note: 1/2" diameter rods are not available
on Series TAE
** PS option adds 1/2" to overall length.
Rod End Thread Style
(Specify “A” or “B” on all models)
Rod Size
Thd A
Thd B
1/4 ø
1/4-28
10-32
5/16 ø
5/16-24
1/4-28
3/8 ø
3/8-24
5/16-24
1/2 ø
1/2-20
7/16-20
Adjustable Cushions*
DR = Rod end only
DC = Cap end only
D = Both ends
* Add 1/2" per cushioned end.
ACT-5-20
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Section 6
Round Line
Stainless Steel Body Air Actuator
Operating Variations ...................................................................ACT-6-2
Technical Data .............................................................................ACT-6-3
Competitive Cross Reference Guide .........................................ACT-6-4
Single Acting Spring Return Cylinders
Nose Mount .............................................................................ACT-6-6
Pivot Mount .............................................................................ACT-6-7
Front Block Mount ...................................................................ACT-6-8
Single Acting Spring Return, Non-Rotating Cylinders
Nose Mount .............................................................................ACT-6-9
Pivot Mount ...........................................................................ACT-6-10
Reverse Acting Spring Extend Cylinders
Nose Mount ...........................................................................ACT-6-11
Pivot Mount ...........................................................................ACT-6-12
Double Acting Cylinders
Nose Mount ...........................................................................ACT-6-13
Pivot Mount ...........................................................................ACT-6-14
Double End Mount ................................................................ACT-6-15
Front Block Mount .................................................................ACT-6-16
Double Acting, Double Rod End Cylinders
Double End Mount ................................................................ACT-6-17
Options & Accessories .............................................................ACT-6-18
Position Sensing Systems........................................................ACT-6-20
Ecology Piston Seal Option......................................................ACT-6-21
Product Numbering System .....................................................ACT-6-22
ACT-6-6 – Single Acting
Spring Return – Nose Mount
Spring Return – Pivot Mount
ACT-6-8 – Single Acting Spring
Return – Front Block Mount
Non-rotating – Nose Mount
Non-rotating – Pivot Mount
ACT-6-11 – Reverse Acting
Spring Extend – Nose Mount
ACT-6-12 – Reverse Acting
Spring Extend – Pivot Mount
ACT-6-13 – Double Acting
– Nose Mount
– Pivot Mount
– Double End Mount
– Front Block Mount
Double Rod End
– Double End Mount
ACT-6-20 – Position
Sensing Systems
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-6-1
Round Line Actuators
Operating Variations
VENTED
AIR APPLIED
Air introduced into the cylinder at the port furthest away from
the rod actuates the cylinder extending the piston rod. A spring
returns the piston to its original retracted position when
pressure is removed from the cylinder.
AIR
AIR PRESSURE TO EXTEND
VENTED
Single Acting Spring Return Cylinders
AIR
EXHAUSTED
Single Acting Non-Rotating Cylinders
Identical in operation to a Single Acting Spring Return
Cylinder, Non-Rotating Cylinders incorporate a hexagonal
shaped piston rod and bearing to prevent the rod from
turning.
SPRING TO RETURN
AIR
EXHAUSTED
VENTED
Single Acting Spring Extend Cylinders
SPRING TO EXTEND
AIR
APPLIED
VENTED
Air introduced into the cylinder at the port closest to the rod
actuates the cylinder – retracting the piston rod. A spring
returns the piston to its original extended position when
pressure is removed from the cylinder.
AIR
AIR PRESSURE TO RETURN
AIR
EXHAUSTED
AIR
APPLIED
AIR
AIR PRESSURE TO EXTEND
AIR
APPLIED
AIR
EXHAUSTED
Air pressure is used to both extend and retract the piston rod.
Pressure applied to one end port of the cylinder moves the
piston in the opposite direction as the air is exhausted from
the other cylinder end.
AIR
AIR PRESSURE TO RETURN
ACT-6-2
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Specifications
Operating Specifications
Force Factor Data
Fluids: Filtered, lubricated or non-lubricated, compressed air
Maximum Operating Pressure: 250 psig (17.2 bar)
Temperature Range*:
Standard Nitrile Seals: -20° to 200°F (-29° to 93°C)
Lubrication: All Series S stainless steel body air cylinders are prelubricated at the time of assembly with a Teflon®–based grease.
Cylinder life will be enhanced with the use of a properly
maintained Lubricator. In the absence of a lubricator, it is
recommended that a non-detergent, mineral-based oil be directly
introduced into the cylinder periodically.
Side Loading: Cylinders are specifically designed to push and pull.
Side loading of the piston rod should be avoided to ensure
maximum operating performance and life. Care should be taken
during installation to properly align the load to be moved with the
centerline of the cylinder.
*With dew point of supply air less than air temperature below 35°F
(2°C)
Bore
Size
Rod Diameter
(Hex†)
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
2-1/2"
3/16"
3/16"
1/4"
*5/16"
7/16"
7/16"
*5/8"
*5/8"
Force Factor (Area)
Extend
Retract
.15
.25
.44
.89
1.23
1.77
3.14
4.91
.12
.22
.39
.61
1.08
1.62
2.84
4.61
Cylinder Output Formula
Cylinder Output Force = Force Factor (Area) x Air Line Pressure
(psi)
†
Non-Rotating Cylinders have hex-shaped piston rods.
*Non-Rotating 1-1/16" bore size uses a 3/8" hex piston rod.
2" and 2-1/2" bore not available
Cylinder Body: Type 304 Stainless Steel
Head Cap: Aluminum Alloy
Piston Rod: Type 303 Stainless Steel
Rod Bearing: Oil Impregnated Sintered Bronze
Piston: 2011-T3 Aluminum Alloy
Rod & Piston Seals: Nitrile
Pivot Bracket, Rod Clevis, Foot Bracket, Mounting Nut: Zinc Plated
Carbon Steel
Approximate Spring Forces — In Pounds
Bore
Size
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
Mounting Dimensions
All dimensions contained within this catalog are sufficiently accurate for
general use. However, the manufacturer assumes no responsibility for
errors or omissions. Certified prints are available upon request at a
nominal charge.
Port Sizes
Spring Return Models
Spring Extend Models
With
With
With
With
Piston Rod Piston Rod Piston Rod Piston Rod
Retracted
Extended Extended Retracted
2
1
2
1
4
2
4
2
6
3
6
3
6
3
6
3
15
7.5
15
7.5
12
6
12
6
30
15
30
15
Bore
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
2-1/2"
Port
Size
10-32
10-32
1/8" N.P.T.
1/8" N.P.T.
1/8" N.P.T.
1/8" N.P.T.
1/4" N.P.T.
1/4" N.P.T.
5
4
3
2
1
10
9
6
8
7
Quality Cylinder Components for Dependable Service
1. Rod Threads Roll-formed for superior strength and resistance to
wear or breakage.
2. Bearing Oil impregnated sintered bronze provides exceptional rod
support, smooth rod movement and optimum cycle life
3. Rod Seal Lip-type nitrile, pressure energized and wear
compensating.
4. Piston Solid aluminum alloy 2011-T3 is strong yet lightweight for low
inertia. The piston is spin riveted to roll-formed piston rod threads for
maximum strength.
5. Piston Seals Lip-type nitrile seals are pressure energized and wear
compensating. Excellent lubrication retention characteristics reduce
seal friction, ensuring long life.
6. Wrench Flats Broached wrench flats are standard on most models.
Brookville, OH USA
7. Head/Cap Precision machined from 2011-T3 solid aluminum alloy for
strength and durability. “V” grooves in the face of the head and cap
provide maximum air flow for fast response.
8. Pressure Ports Full, unrestricted porting for maximum air flow.
9. Piston Rod The Type 303 stainless steel is hard chrome plated,
ground and polished for extended rod seal life.
10. Cylinder Body Type 304 stainless steel with a drawn and polished
internal diameter ensures smooth performance and outstanding cycle
life. The body is secured to the head and cap using double rolled-in
construction.
Springs (Not shown.) The springs used on single acting cylinders are
manufactured from music wire and designed for literally millions of
trouble-free cycles.
Phone 937-833-4033
www.norgren.com
ACT-6-3
Competitive Cross-Reference Guide
❏ = manufacturer's stroke length designation
Manufacturer
Bimba
Clippard
American
Model No. Model No. Model No.
Mounting
Style
Roundline
Model No.
Single Acting — Spring Return
Nose
Pivot
Front Block
RLA ❏❏❏-SAN-AA00
RLA ❏❏❏-SAP-AA00
RLA ❏❏❏-SAB-AA00
01❏
01❏-P
BF-01❏
437SNS-❏
437SVS-❏
437SBFS-❏
.44NSR❏
.44PSR❏
.44BFNSR❏
Single Acting Non-Rotating
Nose
Pivot
RLA ❏❏❏-NRN-AA00
RLA ❏❏❏-NRP-AA00
01❏-NR
01❏-NRP
437SNHS-❏
437RVHS-❏
.44NRSR❏
.44NRPSR❏
7/16" Reverse Acting — Spring Extend Nose
Reverse Acting — Spring Extend Pivot
RLA ❏❏❏-RAN-AA00
RLA ❏❏❏-RAP-AA00
01❏-R
01❏-RP
Double Acting
Double Acting
Double Acting
Double Acting
Nose
Pivot
Double End
Front Block
RLA ❏❏❏-DAN-AA00
RLA ❏❏❏-DAP-AA00
RLA ❏❏❏-DAD-AA00
RLA ❏❏❏-DAB-AA00
01❏-D
01❏-DP
01❏-DX
BF-01❏-D
437DNS-❏
437DVS-❏
437DVS-❏-2
437DBFS-❏
.44DSR❏
.44DPSR❏
.44DXPSR❏
.44BFDSR❏
Double Acting Double Rod End
Double End
RLA ❏❏❏-DRD-AA00
01❏-DXDE
437DES-❏
.44DXSR❏
Nose
Pivot
RLB ❏❏❏-SAN-AA00
RLB ❏❏❏-SAP-AA00
02❏
02❏-P
562SNS-❏
562SVS-❏
.56NSR❏
.56PSR❏
Nose
Pivot
RLB ❏❏❏-NRN-AA00
RLB ❏❏❏-NRP-AA00
02❏-NR
02❏-NRP
562SNHS-❏
562SVHS-❏
.56NRSR❏
.56NRPSR❏
9/16" Reverse Acting — Spring Extend Nose
RLB ❏❏❏-RAN-AA00
RLB ❏❏❏-RAP-AA00
02❏-R
02❏-RP
Double Acting
Double Acting
Double Acting
Nose
Pivot
Double End
RLB ❏❏❏-DAN-AA00
RLB ❏❏❏-DAP-AA00
RLB ❏❏❏-DAD-AA00
02❏-D
02❏-DXP
02❏-DXP
562DNS-❏
562DVS-❏
562DVS-❏-2
.56DSR❏
.56DXPSR❏
.56DXPSR❏
Double End
RLB ❏❏❏-DRD-AA00
02❏-DXDE
562DES-❏
.56DXSR❏
Nose
Pivot
Front Block
RLC ❏❏❏-SAN-AA00
RLC ❏❏❏-SAP-AA00
RLC ❏❏❏-SAB-AA00
04❏
04❏-P
BF-04❏
SSR-12-❏
USR-12-❏
FSR-12-❏
750SNS-❏
750SVS-❏
750SBFS-❏
7-S-❏
7-SP-❏
7-BFS-❏
.75NSR❏
.75PSR❏
.75BFNSR❏
Nose
Pivot
RLC ❏❏❏-NRN-AA00
RLC ❏❏❏-NRP-AA00
04❏-NR
04❏-NRP
SSN-12-❏
USN-12-❏
750SNHS-❏
750SVHS-❏
7-SH-❏
7-SHP-❏❏
.75NRSR❏
.75NRPSR❏
Reverse Acting — Spring Extend Nose
RLC ❏❏❏-RAN-AA00
RLC ❏❏❏-RAP-AA00
04❏-R
04❏-RP
SRR-12-❏
URR-12-❏
750RNS-❏
750RVS-❏
7-SR-❏
7-SRP-❏
.75RSR❏
.75RPSR❏
Double Acting
Double Acting
Double Acting
Double Acting
Nose
Pivot
Double End
Front Block
RLC ❏❏❏-DAN-AA00
RLC ❏❏❏-DAP-AA00
RLC ❏❏❏-DAD-AA00
RLC ❏❏❏-DAB-AA00
04❏-D
04❏-DP
04❏-DX
BF-04❏-D
SDR-12-❏
UDR-12-❏
UDR-12-❏
FDR-12-❏
750DNS-❏
750DVS-❏
750DVS-❏-2
750BFS-❏
7-D-❏
7-DP-❏
7-DP-❏
7-BFD-❏
.75DSR❏
.75DPSR❏
.75DXPSR❏
.75BFDSR❏
Double End
RLC ❏❏❏-DRD-AA00
04❏-DXDE SDD-12-❏
750DES-❏
7-D2EY-❏
.75KDXSR❏
Nose
Pivot
Front Block
RLD ❏❏❏-SAN-AA00
RLD ❏❏❏-SAP-AA00
RLD ❏❏❏-SAB-AA00
09❏
09❏-P
BF-09❏
SSR-17-❏
USR-17-❏
FSR-17-❏
1062SNS-❏
1062SVS-❏
1062SBFS-❏
6-S-❏
6-SP-❏
6-BFS-❏
1.06NSR❏
1.06PSR❏
1.06BFNSR❏
Nose
Pivot
RLD ❏❏❏-NRN-AA00
RLD ❏❏❏-NRP-AA00
09❏-NR
09❏-NRP
SSN-17-❏
USN-17-❏
1062SNHS-❏
1062SVHS-❏
6-SH-❏
6-SHP-❏
1.06NRSR❏
1.06NRPSR❏
RLD ❏❏❏-RAN-AA00
RLD ❏❏❏-RAP-AA00
09❏-R
09❏-RP
SRR-17-❏
URR-17-❏
1062RNS-❏
1062RVS-❏
6-SR-❏
6-SRP-❏
1.06RSR❏
1.06RPSR❏
Bore Cylinder Model
3/4"
1-1/16" Single Acting Non-Rotating
N/A
N/A
437RNS-❏
437RVS-❏
562RNS-❏
562RVS-❏
Humphrey
Model No.
N/A
N/A
Continued on Next Page
ACT-6-4
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Parker
Model No.
.44RSR❏
.44RPSR❏
.56RSR❏
.56RPSR❏
Competitive Cross-Reference Guide (Continued)
❏ = manufacturer's stroke length designation
Manufacturer
Bimba
Clippard
American
Model No. Model No. Model No.
Bore Cylinder Model
Mounting
Style
Round Line
Model No.
Double
Double
1-1/16" Double
Double
Nose
Pivot
Double End
Front Block
RLD ❏❏❏-DAN-AA00
RLD ❏❏❏-DAP-AA00
RLD ❏❏❏-DAD-AA00
RLD ❏❏❏-DAB-AA00
09❏-D
09❏-DP
09❏-DX
BF-09❏-D
Double End
RLD ❏❏❏-DRD-AA00
Single Acting — Spring Return Nose
Single Acting — Spring Return Pivot
Parker
Model No.
1062DNS-❏
1062DVS-❏
1062DVS-❏-2
1062DBFS-❏
6-D-❏
6-DP-❏
6-DP-❏
6-BFD-❏
1.06DSR❏
1.06DPSR❏
1.06DXPSR❏
1.06BFDSR❏
1062DES-❏
6-D2EY-❏
1.06KDXSR❏
RLE ❏❏❏-SAN-AA00
RLE ❏❏❏-SAP-AA00
12❏
12❏-P
SSR-20-❏
USR-20-❏
1250SNS-❏
1250SVS-❏
25-S-❏
25-SP-❏
1.25NSR❏
1.25PSR❏
Nose
Pivot
RLE ❏❏❏-NRN-AA00
RLE ❏❏❏-NRP-AA00
12❏-NR
12❏-NRP
SSN-20-❏
USN-20-❏
1250SNHS-❏
1250SVHS-❏
25-SH-❏
25-SHP-❏
1.25NRSR❏
1.25NRPSR❏
1-1/4" Reverse Acting — Spring Extend Nose
RLE ❏❏❏-RAN-AA00
RLE ❏❏❏-RAP-AA00
12❏-R
12❏-RP
SRR-20-❏
URR-20-❏
1250RNS-❏
1250RVS-❏
25-SR-❏
25-SRP-❏
1.25RSR❏
1.25RPSR❏
Double Acting
Double Acting
Double Acting
Nose
Pivot
Double End
RLE ❏❏❏-DAN-AA00
RLE ❏❏❏-DAP-AA00
RLE ❏❏❏-DAD-AA00
12❏-D
12❏-DP
12❏-DP
SDR-20-❏
UDR-20-❏
UDR-20-❏
1250DNS-❏
1250DVS-❏
1250DVS-❏-2
25-D-❏
25-DP-❏
25-DP-❏
1.25DSR❏
1.25DXPSR❏
1.25DXPSR❏
Double End
RLE ❏❏❏-DRD-AA00
1250DES-❏
25-D2EY-❏ 1.25KDXSR❏
Single Acting — Spring Return Front Block
RLF ❏❏❏-SAN-AA00
RLF ❏❏❏-SAP-AA00
RLF ❏❏❏-SAB-AA00
17❏
17❏-P
BF-17❏
SSR-24-❏
CSR-24-❏
N/A
1500SNS-❏
1500SVS-❏
1500SBFS-❏
5-S-❏
5-SP-❏
5-BFS-❏
1.50NSR❏
1.50PSR❏
1.50BFNSR❏
Nose
Pivot
RLF ❏❏❏-NRN-AA00
RLF❏❏❏-NRP-AA00
17❏-NR
17❏-NRP
SSN-24-❏
CSN-24-❏
1500SNHS-❏
1500SVHS-❏
5-SH-❏
S-SHP-❏
1.50NRSR❏
1.50NRPSR❏
RLF❏❏❏-RAN-AA00
RLF ❏❏❏-RAP-AA00
17❏-R
17❏-RP
SRR-24-❏
CRR-24-❏
1500RNS-❏
1500RVS-❏
5-SR-❏
5-SRP-❏
1.50RSR❏
1.50RPSR❏
Nose
Pivot
Double End
Front Block
RLF ❏❏❏-DAN-AA00
RLF ❏❏❏-DAP-AA00
RLF ❏❏❏-DAD-AA00
RLF ❏❏❏-DAB-AA00
17❏-D
17❏-DP
17❏-DX
BF-17❏-D
SDR-24-❏
CDR-24-❏
EDR-24-❏
N/A
1500DNS-❏
1500DVS-❏
1500DVS-❏-2
1500DBFS-❏
5-D-❏
5-DP-❏
5-DP-❏
5-BFD-❏
1.50DSR❏
1.50DPSR❏
1.50DXSR❏
1.50BDSR❏
Double End
RLF ❏❏❏-DRD-AA00
1500DES-❏
5-D2EY-❏
1.50KDXSR❏
RLG ❏❏❏-SAN-AA00
RLG ❏❏❏-SAP-AA00
31❏
31❏-XP
4-S-❏
4-SP-❏
2.00NSR❏
2.00PSR❏
RLG ❏❏❏-RAN-AA00
RLG ❏❏❏-RAP-AA00
31❏-R
31❏-RP
4-SR-❏
4-SRP-❏
2.00RSR❏
2.00RPSR❏
Double Acting
Double Acting
Double Acting
Nose
Pivot
Double End
RLG ❏❏❏-DAN-AA00
RLG ❏❏❏-DAP-AA00
RLG ❏❏❏-DAD-AA00
31❏-D
31❏-DXP
31❏-DXP
4-D-❏
4-DP-❏
4-DP-❏
2.00DSR❏
2.00XPSR❏
2.00DXPSR❏
Double End
RLG ❏❏❏-DRD-AA00
31❏-DXDE
4-D2EY-❏
2.00KDXSR❏
Nose
Pivot
Double End
RLH ❏❏❏-DAN-AA00
RLH ❏❏❏-DAP-AA00
RLH ❏❏❏-DAD-AA00
50❏-D
50❏-DXP
50❏-DXP
Double End
RLH ❏❏❏-DRD-AA00
50❏-DXDE
Acting
Acting
Acting
Acting
1-1/2" Reverse Acting — Spring Extend Pivot
Double
Double
Double
Double
Acting
Acting
Acting
Acting
2"
Double Acting
Double Acting
2-1/2" Double Acting
Brookville, OH USA
SDR-17-❏
UDR-17-❏
UDR-17-❏
FDR-17-❏
Humphrey
Model No.
N/A
N/A
SDR-32-❏
UDR-32-❏
UDR-32-❏
N/A
2000DES-❏
N/A
UDR-40-❏
UDR-40-❏
N/A
N/A
Phone 937-833-4033
3-D-❏
3-DP-❏
3-DP-❏
N/A
3-D2EY-❏
www.norgren.com
ACT-6-5
Single Acting Spring Return —
Nose Mount
• Standard stroke length cylinders are available
from shelf stock.
• Custom stroke lengths manufactured in minimal
time.
TOTAL LENGTH
KK Piston
Rod
Threads
A
E
K
G
C
RM Pilot
V
MM Dia.
Piston
Rod
J
D Across
Wrench
Flats
EE Port
N1 Mounting Nut
Dimensions — All Dimensions in Inches
Bore
Size
A
C
D
E
EE
G
J
K
KK
MM
N1
RM
V
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
0.50
0.50
0.50
0.50
0.75
0.75
0.88
NA
NA
NA
NA
0.25
0.25
0.38
NA
NA
NA
NA
0.38
0.38
0.50
0.50
0.62
0.81
1.12
1.34
1.56
2.08
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
0.31
0.38
0.44
0.50
0.63
0.63
0.81
0.38
0.50
0.62
0.88
0.88
0.88
1.25
0.19
0.19
0.19
0.19
0.25
0.25
0.31
10-32
10-32
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
0.18
0.18
0.25
0.31
0.43
0.43
0.62
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
3/4-16
1-1/4-12
.369/.373
.434/.437
.494/.498
.621/.624
.746/.749
.746/.749
1.372/1.375
0.05
0.06
0.08
0.07
0.09
0.09
0.12
Total Length – Standard Strokes
Total length for stroke
longer than 4" standard
Bore
Size
1/2
1
1-1/2
2
2 -1/2
3
4
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
2.25
2.66
2.69
3.00
3.97
3.63
4.91
3.19
3.15
3.19
3.50
4.47
4.13
5.41
4.12
4.27
4.38
4.56
–
–
–
5.07
4.77
4.88
5.06
6.28
5.82
7.41
6.01
5.90
–
–
–
–
–
6.95
6.39
6.57
6.62
8.09
7.51
8.66
8.83
8.01
8.26
8.18
9.90
9.20
11.59
1.31 + (.94 per 1/2" of stroke)
1.53 + (1.62 per 1" of stroke)
1.50 + (1.69 per 1" of stroke)
1.94 + (1.56 per 1" of stroke)
2.66 + (1.81 per 1" of stroke)
2.44 + (1.69 per 1" of stroke)
Consult Factory
Bore Sizes
7/16, 9/16
3/4, 1-1/16
1-1/4, 1-1/2, 2
Stock bore sizes and strokes are shown below. Contact the factory for custom
stroke lengths. For Options and Accessories see ACT-6-18/19. See ACT-6-21 for
complete Product Numbering System.
R L ■ ■ ■ ■
2
3
4
5
–
6
S A N
7
8
9
–
Standard Stroke Lengths
1/2, 1, 1-1/2, 2, 2-1/2, 3, or 4
1, 2, 3, 4, 5, or 6
1, 2, 3, 4, 5, or 6
A A 0 0
10 11 12 13
Series
Bore
A
B
C
D
Size
7/16"
9/16"
3/4"
1-1/16"
E
F
G
Full
00
01
02
Options
00
No Options
90
Standard Magnetic Piston Only1
1-1/4"
1-1/2"
2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
pistons will change overall cylinder length.
See table on ACT-6-20.
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
X
Fractional Increments of Stroke*
A
0"
J
1/2"
Model
SA
RA
NR
DA
DR
(4Double End Mount Only)
Single Acting Spring Return
Reverse Acting Spring Extend
Non-Rotating Rod
Double Acting
Double Acting Double Rod End4
* See ACT-6-22 for stroke increments.
ACT-6-6
7/16" – 1-1/2" Bore – 15"
2" Bore – Consult Factory
Stock Stroke Lengths (in)
Ordering Information — Standard Stroke Lengths
1
Maximum Stroke
Lengths
Brookville, OH USA
(2Bumpers on air side only with spring version)
No Options
Viton Seals
Bumpers (Head & Cap)2
Viton seals and bumpers
Special
Mounting Style
(3Includes Mounting Nut)
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
Pivot Mount
• Standard stroke length cylinders are available from
shelf stock.
• Custom stroke lengths manufactured in minimal time.
TOTAL LENGTH
A
KK Piston
Rod
Threads
G
C
RM Pilot
EE Port
V
FL
CB
M
MM Dia.
Piston
Rod
CD Dia.
PIN
D Across
Wrench
Flats
E1 Dia.
LH
E2 Dia.
N2 Mounting
Threads
N1 Mounting Threads
Bore
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
A
CB
C
CD
D
E1
E2
EE
FL
G
KK
L
LH
M
0.50
0.50
0.50
0.50
0.75
0.75
0.88
0.31
0.31
0.38
0.38
0.50
0.62
0.75
NA
NA
NA
0.12
0.25
0.25
0.38
0.156
0.156
0.250
0.250
0.250
0.375
0.375
NA
NA
NA
.25
.38
.38
.50
0.50
0.62
0.81
1.12
1.34
1.56
2.08
0.74
0.62
0.86
1.12
1.34
1.56
2.08
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
0.44
0.38
0.62
0.62
0.78
0.81
1.03
0.31
0.38
0.44
0.50
0.63
0.63
0.81
10-32
10-32
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
0.25
0.25
0.34
0.34
0.41
0.50
0.56
0.50
0.50
0.75
0.75
0.88
1.00
1.63
0.25
0.19
0.28
0.28
0.40
0.38
0.44
1/2
1
1-1/2
2
2 -1/2
3
4
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
2.69
2.93
3.47
3.72
–
4.31
–
3.63
3.43
3.97
4.22
5.19
4.81
6.34
4.57
4.55
5.16
5.28
–
–
–
5.51
5.05
5.66
5.78
7.00
6.50
8.34
–
–
7.39
6.67
7.35
7.34
8.81
8.19
9.59
9.27
8.29
9.04
8.90
10.62
9.88
12.53
R L ■ ■ ■ ■
3
4
5
–
6
Bore Sizes
7/16
3/4, 1-1/16, 1-1/4
1-1/2, 2
Size
7/16"
9/16"
3/4"
1-1/16"
E
F
G
Full
00
01
02
S A P
7
8
9
–
7/16" – 1-1/2" Bore – 15"
10 11 12 13
Options
00
No Options
90
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
X
A
0"
J
1/2"
Maximum Stroke
Lengths
A A 0 0
1-1/4"
1-1/2"
2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
RM
1/2, 1
1, 2, or 3
Series
Bore
A
B
C
D
V
0.05 .369/.373
0.06 .434/.437
0.08 .494/.498
0.07 .621/.624
0.09 .746/.749
0.09 .746/.749
0.12 1.372/1.375
2
N2
1.75 + (.94 per 1/2" of stroke)
1.81 + (1.62 per 1" of stroke)
2.28 + (1.69 per 1" of stroke)
2.66 + (1.56 per 1" of stroke)
3.38 + (1.81 per 1" of stroke)
3.12 + (1.69 per 1" of stroke)
Consult Factory
1
N1
Bore
Size
–
–
–
–
MM
0.18 3/8-24 7/16-20
0.18 7/16-20 7/16-20
0.25 1/2-20
5/8-18
0.31 5/8-18
5/8-18
0.43 3/4-16
3/4-16
0.43 3/4-16
NA
0.62 1-1/4-12 1-1/4-12
Model
SA
RA
NR
DA
DR
Non-Rotating Rod
Double Acting
Brookville, OH USA
No Options
Viton Seals
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
ACT-6-7
Front Block Mount
shelf stock.
E1
SQ
TOTAL LENGTH
A
KK Piston
Rod
Threads
RM
Pilot
K
DB Thds
C'Bore for SB Sockets
Head Cap Screw
(2)
C
V
MM Dia.
Piston
Rod
E2
J
D Across
Wrench
Flats
7/16" BORE
ONLY
DN
EE Port
H
RT Threads
BC Bolt Circle
(2)
.44
.31
.44
Bore
7/16"
3/4"
1-1/16"
1-1/2"
A
BC
C
D
DB
DN
E1
E2
EE
H
J
K
KK
MM
RM
RT
SB
V
0.50
0.75
0.75
1.25
0.75
1.00
1.25
1.75
NA
0.25
0.38
0.25
NA
0.22
0.25
0.38
8-32
1/4-20
1/4-20
5/16-18
NA
0.62
0.81
1.12
0.75
1.00
1.25
1.75
0.50
0.81
1.12
1.56
10-32
1/8 NPT
1/8 NPT
1/4 NPT
NA
0.38
0.62
0.88
0.38
0.62
0.88
0.88
0.19
0.19
0.19
0.25
10-32
1/4-28
5/16-24
7/16-20
0.18
0.25
0.31
0.43
.437
.625
.750
1.00
8-32
10-32
10-32
1/4-20
NA
#10
#10
1/4
0.06
0.09
0.09
0.13
Bore
Size
1/2
1
1-1/2
2
2 -1/2
3
4
7/16"
3/4"
1-1/16"
1-1/2"
2.88
3.85
–
–
3.82
4.35
5.19
5.69
4.76
–
–
–
5.70
6.04
7.00
7.69
–
–
–
–
7.58
7.73
8.81
9.69
9.46
9.42
10.62
11.69
1.94
2.66
3.38
3.69
+
+
+
+
(.94 per 1/2" of stroke
(1.69 per 1" of stroke)
Maximum Stroke
Lengths
R L ■ ■ ■ ■
1
2
3
4
5
–
6
7/16" – 1-1/2" Bore – 15"
S A B
7
8
9
–
A A 0 0
10 11 12 13
Series
Bore
A
C
D
F
Full
00
01
02
Options
00
No Options
90
Size
7/16"
3/4"
1-1/16"
1-1/2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
X
A
0"
J
1/2"
Model
SA
RA
NR
DA
DR
ACT-6-8
Brookville, OH USA
Non-Rotating Rod
Double Acting
No Options
Viton Seals
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
Single Acting Non-Rotating —
Nose Mount
shelf stock.
TOTAL LENGTH
A
KK Piston
Rod
Threads
K
G
E
RM Pilot
C
V
MM Hex
Piston
Rod
J
EE Port
N1 Mounting Nut
Bore
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
A
C
E
EE
G
J
K
KK
MM
N1
RM
V
0.50
0.50
0.50
0.50
0.88
0.88
0.25
0.25
0.25
0.25
0.25
0.25
0.50
0.62
0.81
1.12
1.34
1.56
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
0.31
0.38
0.44
0.50
0.63
0.63
0.38
0.50
0.62
0.88
0.88
0.88
0.19
0.19
0.19
0.19
0.25
0.25
10-32
10-32
1/4-28
5/16-24
7/16-20
7/16-20
0.18
0.18
0.25
0.38
0.43
0.43
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
3/4-16
.369/.373
.434/.437
.494/.498
.621/.624
.746/.749
.746/.749
0.05
0.06
0.08
0.07
0.09
0.09
Bore
Size
1/2
1
1-1/2
2
2 -1/2
3
4
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2.50
2.90
2.94
3.25
–
3.63
3.44
3.40
3.44
3.75
4.47
4.13
4.38
4.52
4.63
4.81
–
–
5.32
5.02
5.13
5.31
6.28
5.82
–
–
–
–
–
–
7.20
6.64
6.82
6.87
8.09
7.51
9.08
8.26
8.51
8.43
9.90
9.20
1.56
1.78
1.75
2.19
2.66
2.44
+
+
+
+
+
+
(.94 per 1/2" of stroke)
R L ■ ■ ■ ■
1
2
3
4
5
–
6
Maximum Stroke
Lengths
7/16" – 1-1/2" Bore – 15"
N R N
7
8
9
–
A A 0 0
10 11 12 13
Series
Bore
A
B
C
D
Size
7/16"
9/16"
3/4"
1-1/16"
E
F
Full
00
01
02
Options
00
No Options
90
1-1/4"
1-1/2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
X
A
0"
J
1/2"
Model
SA
RA
NR
DA
DR
Non-Rotating Rod
Double Acting
Brookville, OH USA
No Options
Viton Seals
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
ACT-6-9
Single Acting Non-Rotating—
Pivot Mount
shelf stock.
TOTAL LENGTH
A
KK Piston
Rod
Threads
G
C
FL
RM Pilot
EE Port
V
CB
M
MM Hex
Piston
Rod
CD Dia.
Pin
L
E1 Dia.
LH
E2 Dia.
N2 Mounting Thds.
N1 Mounting Threads
Bore
A
C
CB
CD
E1
E2
EE
FL
G
KK
L
LH
M
MM
N1
7/16"
0.50
0.25
0.31
0.156
0.50
0.74
10-32
0.44
0.31
10-32
0.25
0.50
0.25
0.19
3/8-24
9/16"
0.50
0.25
0.31
0.156
0.62
0.62
10-32
0.38
0.38
10-32
0.25
NA
0.19
0.19
7/16-20 7/16-20 .434/.437 0.06
3/4"
0.50
0.25
0.38
0.250
0.81
0.86 1/8 NPT
0.62
0.44
1/4-28
0.34
0.75
0.28
0.25
1/2-20
5/8-18 .494/.498 0.08
1-1/16"
0.50
0.25
0.38
0.250
1.12
1.12 1/8 NPT
0.62
0.50
5/16-24
0.34
0.75
0.28
0.38
5/8-18
5/8-18 .621/.624 0.07
1-1/4"
0.88
0.25
0.50
0.250
1.34
1.34 1/8 NPT
0.78
0.63
7/16-20
0.41
0.88
0.40
0.43
3/4-16
3/4-16 .746/.749 0.09
1-1/2"
0.88
0.38
0.62
0.375
1.56
1.56 1/8 NPT
0.81
0.63
7/16-20
0.50
1.00
0.37
0.43
3/4-16
N2
RM
V
7/16-20 .369/.373 0.05
NA
.746/.749 0.09
Bore
Size
1/2
1
1-1/2
2
2 -1/2
3
4
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
3.19
3.18
3.72
3.84
–
–
4.13
3.68
4.22
4.34
5.19
4.94
5.07
4.8
5.41
5.40
–
–
6.01
5.30
5.91
5.90
7.00
6.63
–
–
–
–
–
–
7.89
6.92
7.60
7.46
8.81
8.32
9.77
8.54
9.29
9.02
10.62
10.01
2.25
2.06
2.53
2.78
3.38
3.25
+
+
+
+
+
+
(.94 per 1/2" of stroke)
R L ■ ■ ■ ■
1
2
3
4
5
–
6
Maximum Stroke
Lengths
7/16" – 1-1/2" Bore – 15"
N R P
7
8
9
–
A A 0 0
10 11 12 13
Series
Bore
A
B
C
D
Size
7/16"
9/16"
3/4"
1-1/16"
E
F
Full
00
01
02
Options
00
No Options
90
1-1/4"
1-1/2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
X
A
0"
J
1/2"
Model
SA
RA
NR
DA
DR
Non-Rotating Rod
Double Acting
ACT-6-10
Brookville, OH USA
No Options
Viton Seals
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
Reverse Acting Spring Extend —
Nose Mount
shelf stock.
TOTAL LENGTH
KK Piston
Rod
Threads
A
Y
EE Port
G
C
RM Pilot
V
MM Dia.
Piston
Rod
D Across
Wrench
Fltas
E1 Dia.
E2 Dia.
N1 Mounting Nut
A
C
D
E1
E2
EE
G
KK
MM
N1
RM
V
Y
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
Bore
0.50
0.50
0.50
0.50
0.75
1.25
0.88
NA
NA
NA
0.12
0.25
0.25
0.38
NA
NA
NA
0.25
0.38
0.38
0.50
0.74
0.62
0.86
1.12
1.34
1.56
2.08
0.50
0.62
0.81
1.12
1.34
1.56
2.08
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
0.38
0.38
0.50
0.50
0.63
0.63
0.81
10-32
10-32
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
0.19
0.19
0.25
0.31
0.44
0.44
0.62
7/16-20
7/16-20
5/8-18
5/8-18
3/4-16
3/4-16
1-1/4-12
.434/.437
.434/.437
.621/.624
.621/.624
.746/.749
.746/.749
1.372/1.375
0.05
0.06
0.09
0.09
0.09
0.09
0.12
0.72
0.75
0.97
1.06
1.37
1.25
1.46
Bore
Size
1/2
1
1-1/2
2
2 -1/2
3
4
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
3.38
3.62
4.00
4.43
–
–
–
4.82
4.62
5.00
5.43
6.28
6.19
7.11
6.26
6.24
–
7.24
–
–
–
7.70
7.24
7.69
8.24
9.09
9.19
10.11
–
–
–
–
–
–
–
10.58
9.86
10.38
11.05
11.90
12.19
12.34
–
–
13.07
13.86
14.71
15.19
16.34
1.94 + (1.44 per
2.00 + (2.62 per
2.31 + (2.69 per
2.62 + (2.81 per
3.47 + (2.81 per
3.19 + (3.00 per
Consult Factory
1/2" of stroke)
1" of stroke)
1" of stroke)
1" of stroke)
1" of stroke)
1" of stroke)
Maximum Stroke
Lengths
7/16" – 1-1/2" Bore – 15"
2" Bore - Consult Factory
R L ■ ■ ■ ■
1
2
3
4
5
–
6
R A N
7
8
9
–
A A 0 0
10 11 12 13
Series
Bore
A
B
C
D
Size
7/16"
9/16"
3/4"
1-1/16"
E
F
G
Full
00
01
02
Options
00
No Options
90
1-1/4"
1-1/2"
2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
X
A
0"
J
1/2"
Model
SA
RA
NR
DA
DR
Non-Rotating Rod
Double Acting
Brookville, OH USA
No Options
Viton Seals
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
ACT-6-11
Reverse Acting Spring Extend —
Pivot Mount
shelf stock.
TOTAL LENGTH.
Y
A
KK Piston
Rod
Threads
E
G
C
EE Port
V
CB
M
MM Dia.
Piston
Rod
D Across
Wrench
Flats
CD Dia.
PIN
L
RM Pilot
N1 Mounting Threads
LH
Bore
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
A
C
CB
CD
EE
E
G
KK
L
LH
MM
M
N1
RM
V
Y
0.50
0.50
0.50
0.50
0.75
1.25
0.88
NA
NA
NA
0.12
0.25
0.25
0.38
0.31
0.31
0.38
0.38
0.50
0.62
0.75
0.156
0.156
0.250
0.250
0.250
0.375
0.375
10-32
10-32
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/4 NPT
0.74
0.62
0.86
1.12
1.34
1.56
2.08
0.38
0.38
0.50
0.50
0.63
0.63
0.81
10-32
10-32
1/4-28
5/16-24
7/16-20
7/16-20
1/2-20
0.25
0.25
0.34
0.34
0.34
0.50
0.56
0.50
0.50
0.75
0.75
0.88
1.00
1.63
0.19
0.19
0.25
0.31
0.44
0.44
0.62
0.25
0.19
0.28
0.28
0.38
0.38
0.44
7/16-20
7/16-20
5/8-18
5/8-18
3/4-16
3/4-16
1-1/4-12
.434/.437
.434/.437
.621/.624
.621/.624
.746/.749
.746/.749
1.372/1.375
0.05
0.06
0.09
0.09
0.09
0.09
0.12
0.72
0.75
0.97
1.06
1.37
1.25
1.46
Bore
Size
1/2
1
1-1/2
2
2 -1/2
3
4
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
3.82
3.90
4.13
4.59
–
–
–
5.26
4.90
5.13
5.59
6.59
6.88
8.05
6.70
6.52
–
–
–
–
–
8.14
7.52
7.82
8.40
9.40
9.88
11.05
–
–
–
–
–
–
–
11.02
10.14
10.51
11.21
12.21
12.88
13.28
–
–
13.20
14.02
15.02
15.88
17.28
2.38 + (1.44 per
2.28 + (2.62 per
2.44 + (2.69 per
2.78 + (2.81 per
3.78 + (2.81 per
3.88 + (3.00 per
Consult Factory
1/2" of stroke)
1" of stroke)
1" of stroke)
1" of stroke)
1" of stroke)
1" of stroke)
R L ■ ■ ■ ■
1
2
3
4
5
–
6
Maximum Stroke
Lengths
7/16" – 1-1/2" Bore – 15"
2" Bore - Consult Factory
R A P
7
8
9
–
A A 0 0
10 11 12 13
Series
Bore
A
B
C
D
Size
7/16"
9/16"
3/4"
1-1/16"
E
F
G
Full
00
01
02
Options
00
No Options
90
1-1/4"
1-1/2"
2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
X
A
0"
J
1/2"
Model
SA
RA
NR
DA
DR
ACT-6-12
Brookville, OH USA
Non-Rotating Rod
Double Acting
No Options
Viton Seals
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
Double Acting — Nose Mount
shelf stock.
LB + STROKE
KK Piston
Rod
Threads
A
Y
EE Port
G
K
RM Pilot
C
V
MM Dia.
Rod
Piston
J
D Across
Wrench
Flats
E1 Dia.
EE Port
E2 Dia.
N1 Mounting Nut
Bore
A
C
D
EE
E1
E2
G
J
K
KK
LB
MM
N1
RM
Y
V
7/16"
0.50
NA
NA
10-32
0.74
0.50
0.38
0.38
0.19
10-32
2.12
0.18
7/16-20
.434/.437
0.72
0.05
9/16"
0.50
NA
NA
10-32
0.62
0.62
0.38
0.50
0.19
10-32
2.28
0.18
7/16-20
.434/.437
0.75
0.06
3/4"
0.50
NA
NA
1/8 NPT
0.86
0.81
0.50
0.62
0.19
1/4-28
2.97
0.25
5/8-18
.621/.624
0.97
0.09
1-1/16"
0.50
NA
NA
1/8 NPT
1.12
1.12
0.50
0.88
0.19
5/16-24
3.12
0.31
5/8-18
.621/.624
1.06
0.09
1-1/4"
0.75
0.25
0.38
1/8 NPT
1.34
1.34
0.63
0.88
0.25
7/16-20
4.00
0.43
3/4-16
.746/.749
1.37
0.09
1-1/2"
0.75
0.25
0.38
1/8 NPT
1.56
1.56
0.63
0.88
0.25
7/16-20
3.69
0.43
3/4-16
.746/.749
1.25
0.09
2"
0.88
0.38
0.50
1/4 NPT
2.08
2.08
0.81
1.25
0.31
1/2-20
4.69
0.62
1-1/4-12
1.372/1.375
1.46
0.12
2-1/2"
0.88
0.38
0.50
1/4 NPT
2.62
2.62
0.81
1.75
0.31
1/2-20
4.69
0.62
1-3/8-12
1.497/1.500
1.46
0.12
Bore Sizes
7/16, 9/16
3/4
1-1/16
1-1/4,1-1/2, 2, 2-1/2
1/2, 1, 1-1/2, or 2
1, 2, 3, 4, 5, or 6
1, 1-1/2, 2, 3, 4, 5, or 6
1, 2, 3, 4, 5, or 6
Maximum Stroke Lengths
7/16" – 2-1/2" Bore – 36"
R L ■ ■ ■ ■
1
2
3
4
5
–
6
D A N
7
8
9
–
A A 0 0
10 11 12 13
Series
Bore
A
B
C
D
Size
7/16"
9/16"
3/4"
1-1/16"
E
F
G
H
Full
00
01
02
Options
00
No Options
90
1-1/4"
1-1/2"
2"
2-1/2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
X
A
0"
J
1/2"
Model
SA
RA
NR
DA
DR
Non-Rotating Rod
Double Acting
Brookville, OH USA
No Options
Viton Seals
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
ACT-6-13
Double Acting — Pivot Mount
from shelf stock.
time.
LB + STROKE
Y
A
KK Piston
Rod
Threads
E
FL
G
C
CB
EE Port
V
MM Dia.
Piston
Rod
D Across
Wrench
Flats
RM Pilot
CD Dia.
PIN
L
LH
N1 Mounting Threads
N2 Mounting Threads
XD + STROKE
A
C
D
E
EE
FL
7/16"
Bore
0.50
NA
0.31 0.156
CB
CD
NA
0.74
10-32
0.44
RM
V
XD
Y
0.38 10-32
G
KK
0.25 2.81 0.50
L
LB LH
0.18 7/16-20 7/16-20
9/16"
0.50
NA
0.31 0.156
NA
0.62
10-32
0.38
3/4"
0.50
NA
0.38 0.250
NA
0.86 1/8 NPT 0.62
0.50 1/4-28 0.34 4.03 0.75
1-1/16" 0.50 0.12
0.38 0.250
0.25 1.12 1/8 NPT 0.62
1-1/4"
0.75 0.25
0.50 0.250
0.38 1.34 1/8 NPT 0.78
1-1/2"
0.75 0.25
0.62 0.375
2"
0.88 0.38
0.75 0.375
2-1/2"
0.88 0.38
0.75 0.375
MM
.434/.437
0.05
2.56
0.72
0.38 10-32
0.25 2.75 0.50
0.18 7/16-20 7/16-20
.434/.437
0.06
2.56
0.75
0.25
5/8-18
5/8-18
.621/.624
0.09
3.75
0.97
0.50 5/16-24 0.34 4.12 0.75
0.31
5/8-18
5/8-18
.621/.624
0.09
3.84
1.07
0.63 7/16-20 0.41 5.12 0.88
0.43
3/4-16
3/4-16
.746/.749
0.09
4.72
1.37
0.38 1.56 1/8 NPT 0.81
0.63 7/16-20 0.50 4.76 1.00
0.43
3/4-16
NA
.746/.749
0.09
4.38
1.25
0.50 2.08 1/4 NPT 1.03
0.81 1/2-20 0.56 6.06 1.63
0.62 1 1/4-12 1-1/4-12 1.372/1.375
0.12
5.62
1.46
0.50 2.62 1/4 NPT 1.03
0.81 1/2-20 0.56 6.06 1.63
0.62 1 3/8-12 1-3/8-12 1.497/1.500
0.12
5.62
1.46
N1
N2
Bore Sizes
7/16, 9/16
3/4, 1-1/16,1-1/4,
1-1/2, 2, 2-1/2
1/2, 1, 1-1/2, or 2
1, 2, 3, 4, 5, or 6
7/16" – 2-1/2" Bore – 36"
R L ■ ■ ■ ■
1
2
3
4
5
–
6
D A P
7
8
9
–
A A 0 0
10 11 12 13
Series
Bore
A
B
C
D
Size
7/16"
9/16"
3/4"
1-1/16"
E
F
G
H
Full
00
01
02
Options
00
No Options
90
1-1/4"
1-1/2"
2"
2-1/2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
E
X
A
0"
J
1/2"
** See ACT-6-21 for complete information
on the Ecology seal.
ACT-6-14
Model
SA
RA
NR
DA
DR
Non-Rotating Rod
Double Acting
Brookville, OH USA
No Options
Viton Seals
Ecology piston seals (3/4-2-1/2 bores only)**
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
Double Acting — Double End Mount
from shelf stock.
time.
LB + STROKE
A
KK Piston
Rod
Threads
Y2
Y1
G
C
EE Port
V
MM Dia.
Piston
Rod
K
E Dia.
V
A
D Across
Wrench
Flats
RM Pilot
N1 Mounting Nut
Bore
A
C
D
E
EE
G
K
KK
LB
MM
N1
RM
V
Y1
Y2
7/16"
0.50
NA
NA
0.74
10-32
0.38
0.50
10-32
2.81
0.18
7/16-20
.434/.437
0.05
0.73
0.69
9/16"
0.50
NA
NA
0.62
10-32
0.38
0.44
10-32
2.75
0.18
7/16-20
.434/.437
0.06
0.75
0.57
3/4"
0.50
NA
NA
0.86
1/8 NPT
0.50
0.62
1/4-28
4.03
0.25
5/8-18
.621/.624
0.09
0.97
0.90
1-1/16" 0.50
0.12
0.25
1.12
1/8 NPT
0.50
0.62
5/16-24
4.12
0.31
5/8-18
.624/.624
0.09
1.07
0.90
1-1/4"
0.75
0.25
0.38
1.34
1/8 NPT
0.63
0.81
7/16-20
5.12
0.43
3/4-16
.746/.749
0.09
1.37
1.18
1-1/2"
0.75
0.25
0.38
1.56
1/8 NPT
0.63
0.62
7/16-20
4.50
0.43
3/4-16
.746/.749
0.09
1.25
0.94
2"
0.88
0.38
0.50
2.08
1/4 NPT
0.81
1.00
1/2-20
6.06
0.62
1-1/4-12
1.372/1.375
0.12
1.46
1.47
2-1/2"
0.88
0.38
0.50
2.62
1/4 NPT
0.81
1.00
1/2-20
6.06
0.62
1-3/8-12
1.497/1.500
0.12
1.46
1.47
Bore Sizes
3/4, 1-1/16,1-1/4,
1-1/2, 2, 2-1/2
1, 2, 3, 4, 5, or 6
7/16" – 2-1/2" Bore – 36"
R L ■ ■ ■ ■
1
2
3
4
5
–
6
D A D
7
8
9
–
A A 0 0
10 11 12 13
Series
Bore
A
B
C
D
Size
7/16"
9/16"
3/4"
1-1/16"
E
F
G
H
Full
00
01
02
Options
00
No Options
90
1-1/4"
1-1/2"
2"
2-1/2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
E
X
A
0"
J
1/2"
** See ACT-6-21 for complete information
on the Ecology seal.
Model
SA
RA
NR
DA
DR
Non-Rotating Rod
Double Acting
Brookville, OH USA
No Options
Viton Seals
Ecology piston seals (3/4-2-1/2 bores only)**
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
ACT-6-15
Double Acting — Front Block Mount
shelf stock.
E1
SQ
RM
Pilot
LB + STROKE
A
KK Piston
Rod
Threads
C
V
MM Dia.
Piston
Rod
J
D Across
Wrench
Flats
DN
H
RT Threads
BC Bolt Circle
(2)
K
DB Thds
C'Bore for SB Socket
Head Cap Screw
(2)
Y
EE PORT
7/16" BORE
ONLY
E2
.44
#10-32
(Opposite
Side)
.44
.31
EE PORT
Bore
A
BC
C
D
DB
DN
EE
E1
E2
H
J
K
KK
LB
MM
RM
RT
SB
V
Y
7/16"
0.50
0.75
NA
NA
8-32
NA
NA
0.75
0.50
NA
0.38
0.19
10-32
2.12
0.18
0.437
8-32
NA
0.06
NA
3/4"
1/4-28
0.75
1.00
0.25
0.22
1/4-20
0.62 1/8 NPT 1.00
0.81
0.38
0.62
0.19
3.22
0.25
0.625
10-32
#10
0.09
0.50
1-1/16" 0.75
1.25
0.38
0.25
1/4-20
0.81 1/8 NPT 1.25
1.12
0.62
0.88
0.19 5/16-24 3.75
0.31
0.750
10-32
#10
0.09
0.54
1-1/2"
1.75
0.25
0.38 5/16-18 1.12 1/4 NPT 1.75
1.56
0.88
0.88
0.25 7/16-20 4.19
0.43
1.000 1/4-20
1/4
0.13
0.65
1.25
R L ■ ■ ■ ■
1
2
3
4
5
–
6
7/16" – 1-1/2" Bore – 36"
D A B
7
8
9
–
A A 0 0
10 11 12 13
Series
Bore
A
C
D
F
Full
00
01
02
Options
00
No Options
90
Size
7/16"
3/4"
1-1/16"
1-1/2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
X
A
0"
J
1/2"
ACT-6-16
Model
SA
RA
NR
DA
DR
Non-Rotating Rod
Double Acting
Brookville, OH USA
No Options
Viton Seals
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
Double Acting Double Rod End —
Double End Mount
from shelf stock.
time.
ZM + 2 x STROKE
Y
A
KK Piston
Rod
Threads
E. Dia.
G
C
EE Port
V
MM Dia.
Piston
Rod
D Across
Wrench
Flats
RM Pilot
N1 Mounting Nut
Bore
A
C
D
E
EE
G
KK
MM
N1
RM
V
Y
ZM
7/16"
0.50
NA
NA
0.74
10-32
0.38
10-32
0.19
7/16-20
.434/.437
0.05
0.72
2.81
9/16"
0.50
NA
NA
0.62
10-32
0.38
10-32
0.19
7/16-20
.434/.437
0.06
0.75
2.94
3/4"
0.50
NA
NA
0.86
1/8 NPT
0.50
1/4-28
0.25
5/8-18
.621/.624
0.09
0.97
4.00
1-1/16"
0.50
0.12
0.25
1.12
1/8 NPT
0.50
5/16-24
0.31
5/8-18
.621/.624
0.09
1.06
4.00
1-1/4"
0.75
0.25
0.38
1.34
1/8 NPT
0.63
7/16-20
0.43
3/4-16
.746/.749
0.09
1.37
5.56
1-1/2"
0.75
0.25
0.38
1.56
1/8 NPT
0.63
7/16-20
0.43
3/4-16
.746/.749
0.09
1.25
5.12
2"
0.88
0.38
0.50
2.08
1/4 NPT
0.81
1/2-20
0.62
1-1/4-12
1.372/1.375
0.12
1.46
6.56
2-1/2"
0.88
0.38
0.50
2.62
1/4 NPT
0.81
1/2-20
0.62
1-3/8-12
1.497/1.500
0.12
1.46
6.56
R L ■ ■ ■ ■
1
2
3
4
5
–
6
D R D
7
8
9
–
A A 0 0
10 11 12 13
Series
Bore
A
B
C
D
Size
7/16"
9/16"
3/4"
1-1/16"
E
F
G
H
Full
00
01
02
Options
00
No Options
90
1-1/4"
1-1/2"
2"
2-1/2"
Inches of Stroke
0" Stroke
1" Stroke
2" Stroke
1Magnetic
03
04
Special Designation
A
Standard
X
Special
3" Stroke
4" Stroke
Options
A
B
C
D
X
A
0"
J
1/2"
Model
SA
RA
NR
DA
DR
Non-Rotating Rod
Double Acting
Brookville, OH USA
No Options
Viton Seals
Special
Mounting Style
N
Nose Mount3
P
Pivot Mount
D
Double End Mount3
B
Front Block Mount
Phone 937-833-4033
www.norgren.com
ACT-6-17
Options
Accessories
The following options can be requested at the time of cylinder order.
Position 10 of the Product Numbering System (ACT-6-21) pertains to
these options
The following accessories are ordered separately from the cylinder,
use the order number included with the product description.
Air Reservoir
Noise Dampening Bumpers
Nitrile bumpers are installed in each end of the cylinder preventing
metal-to-metal contact to provide extremely quiet cylinder operation.
Air Reservoirs are made of the same high-quality stainless steel as the
Series RL Cylinders.
Note: Overall cylinder length increases by .125 per bumper.
LB PLUS LENGTH
K
K
To Order: Enter “C” in the 10th position of the Product Number
E
Viton Rod & Piston Seals
For higher temperature applications use Viton Seals (-20° to 400°F).
J
EE NPT
(Both Ends)
Bore
3/4"
E
EE
J
K
LB
Standard Internal
Lengths
1" increments thru 4"
0.813
1/8"
0.625
0.187
1.938
1-1/16" 1.125
1/8"
0.875
0.187
2.375
1-1/2"
1.562
1/8"
0.875
0.250
2.250
Ports Rotated 90°
2"
2.080
1/4"
1.250
0.312
2.875
Viewing cylinder from the rod end, specify port relocation in 90°
increments moving counterclockwise from the standard port location.
2-1/2"
2.610
1/4"
1.750
0.312
2.875
1" increments thru 24”
To Order: Enter “B” in the 10th position of the Product Number
How to Order
Example:
1-1/16" bore air reservoir with a 3" internal length would be ordered as
follows: AR-1 1/16 x 3
Flow Controls
To Order: Enter “X” in the 11th position of the Product Number and
specify new port location at 90°, 180°, or 270° from origin.
ACT-6-18
Brookville, OH USA
Part No
Tube Size
Port Size
12 VAO 0210
5/32" O.D.
X10-32UNF
12 VAO 0218
5/32" O.D.
1/8" N.P.T.
12 VAO 0418
1/4" O.D.
1/8" N.P.T.
12 VAO 0428
1/4" O.D.
1/4" N.P.T.
12 VAO 0628
3/8" O.D.
1/4" N.P.T.
Phone 937-833-4033
www.norgren.com
• All accessories are clear zinc plated carbon steel
Pivot Bracket
FL
A
J
A
B
B
A
B
BA
CD
DD
E
F
FL
G
J
M
PB-1
PB-2
PB-3
PB-4
0.50
0.81
1.00
1.125
0.28
0.44
0.62
0.68
0.50
0.75
1.00
1.00
0.156
0.250
0.375
0.375
0.19
0.27
0.27
0.26
0.75
1.12
1.50
1.50
0.06
0.12
0.12
0.25
0.77
1.19
1.75
1.75
0.12
0.19
0.25
0.25
0.56
0.88
1.38
1.38
0.20
0.31
0.38
0.38
Part
Number
CB
CD
CE
CH
KK
L
LH
N
RC-1
RC-2
RC-3
RC-4
RC-5
0.19
0.25
0.25
0.38
0.38
0.94
1.19
1.19
1.69
1.69
0.75
0.94
0.94
1.31
1.31
0.38
0.50
0.50
0.75
0.75
10-32
1/4-28
5/16-24
7/16-20
1/2-20
0.56
0.68
0.69
0.94
0.94
0.66
0.85
0.85
1.12
1.12
0.12
0.16
0.19
0.25
0.31
7/16," 9/16"
G
M
Part
Number
Bore
3/4", 1-1/16", 1-1/4"
E
BA
1-1/2"
2", 2-1/2"
CD Dia.
DD
DD
F
Rod Clevis
(Includes Pin & Jam Nut)
LH
CB
Dia.
CB
Dia.
Bore
7/16", 9/16"
3/4"
1-1/16"
1-1/4", 1-1/2"
2", 2-1/2"
L
CD
CE
N
KK
CHSQ
Foot Bracket
Part
Number
Bore
J
DD
F
CD Dia.
BA
E
A
B
BA
C
7/16" (S)
7/16" (D), 9/16" (S/D)
3/4" (S)
3/4" (D), 1-1/16" (S/D)
FB-1
0.62 0.31 1.00 0.12
FB-2
0.69 0.38 1.00 0.12
FB-3
0.75 0.44 1.25 0.19
FB-4
1.00 0.56 1.50 0.25
1-1/4" (S/D), 1-1/2" (S/D) FB-5
1.50 0.75 1.88 0.62
2" (S/D)
FB-6
1.62 1.00 2.25 0.62
2-1/2" (S/D)
FB-7
1.62 1.00 2.88 0.75
S = Single Acting Models D = Double Acting Models
CD
DD
E
F
FL
J
0.38 0.19 1.38 0.07 0.56 0.88
0.44 0.19 1.38 0.09 0.56 0.83
0.50 0.19 1.62 0.10 0.69 1.09
0.62 0.27 1.88 0.12 0.81 1.38
0.75 0.28 2.50 0.12 1.00 1.75
1.38 0.34 3.12 0.25 1.50 2.50
1.50 0.34 3.75 0.25 1.75 3.00
S/D= Single & Double Acting Models
B
C
FL
A
Mounting Nut
Single Acting Spring Return Models
E HEX
Bore
T
Part
Number
N
E
Single Acting Spring Extend &
Double Acting Models
T
Bore
7/16"
9/16"
3/4"
1-1/16"
1-1/4", 1-1/2"
2"
MN-1
MN-2
MN-3
MN-4
MN-5
MN-6
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
1-1/4-12
0.56
0.69
0.75
0.94
1.12
1.88
0.22
0.25
0.31
0.38
0.42
0.50
7/16", 9/16"
3/4", 1-1/16"
1-1/4", 1-1/2"
2"
2-1/2"
Part
Number
N
E
T
MN-2
MN-4
MN-5
MN-6
MN-7
7/16-20
5/8-18
3/4-16
1-1/4-12
1-3/8-12
0.69
0.94
1.12
1.88
2.00
0.25
0.38
0.42
0.50
0.50
N Threads
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-6-19
Position Sensing Systems
● Attach to Series S Cylinders with an adjustable band
● Switches can be positioned anywhere along the range
of piston travel.
● LED indicator light facilitates installation and trouble
shooting.
● Several switches can be mounted to a cylinder to
control or initiate any sequence function.
● All switches are supplied with 9-ft leads and brackets.
Specifications & Order Number
Wiring Diagram
Model Number
CS8-04
CS8-31
CS8-32
Switch Type
Reed Switch
*MOV & Light
Hall Effect &
Light, Sourcing
Hall Effect &
Light, Sinking
+
–
WHT
SUPPLY
120V MAX
Function
SPST
Normally Open
Normally Open
Normally Open
Switching
Voltage
5-120 VDC/VAC
50/60 Hz
6-24 VDC
6-24 VDC
Switching
Current
0.5 Amp Max.
0.005 Amp Min.
0.5 Amp Max.
0.5 Amp Max.
10 VA
12 Watts Max.
Switching
Power
Max. Voltage
Drop
Magnetic
Sensitivity
Enclosure
Classification
Temperature
Range
BRN
0.45
LOAD
CS8-04
BRN
+
WHT
SUPPLY
6-24 VDC
GRN
0.10
–
12 Watts Max.
LOAD
3.5 Volts
0.5 Volts
0.5 Volts
85 Gauss
85 Gauss
85 Gauss
CS8-31 (Source)
WHT
+
NEMA 6
NEMA 6
BRN
SUPPLY
6-24 VDC
NEMA 6
GRN
0.10
–
-22°F to + 176°F
-22°F to + 176°F -22°F to + 176°F
LOAD
CS8-32 (Sink)
* Metal Oxide Varistor Surge Suppression
Bore Size
9/16
3/4
Change in overall cylinder length when specifying a magnetic piston
+0.25
+0.31
1-1/16 1-1/4
1-1/2
+0.41
+0.43 +0.47 +0.72
-0.09
2
2-1/2
CS8 Series Switch & Mounting Strap Dimensions — In inches
.53 (13)
To order Mounting Strap only,
reference P/N 1A940-01
.40
(10)
.35
(9)
.92 (23)
.37
(9)
1.00 (25)
CS8 Reed & Hall Effect Application Recommendations and Precautions
All Switches have been carefully engineered and tested, but since they may be installed in virtually an unlimited number of applications under a great variety of plant
conditions, they should be installed as outlined to provide maximum reliability.
1. Always stay within the specifications and power rating limitations of the unit installed.
2. Primary and control circuit wiring should not be mixed in the same conduit. Motors will produce high pulses that will be introduced into the control wiring if the
wiring is carried in the same conduit.
3. Never connect the switch without a load present. The switch will be destroyed.
In order to obtain optimum performance and long life, magnetically operated limit switches should not be subjected to: (1) strong magnetic fields, (2) extreme
temperature and (3) excessive ferrous filing or chip buildup.
Improper wiring may damage or destroy the switch. Therefore, the wiring diagram along with the listed power ratings, should be carefully observed before connecting
Lower power switches are designed for signalling electronic circuits. Do not use on relay loads or with incandescent bulbs. Resistive loads only.
ACT-6-20
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Roundline Ecology Piston Seal Option (E)
The Ecology (Impact Dampening) Piston Seal option is available on 3/4 to 2-1/2 inch bore size Roundline cylinders in DAP and DAD
configurations. This option includes non-adjustable air cushions on both the extend and retract stroke of the cylinder. By including the
Ecology Piston Seal option, cylinders can be specified based on weights of load being carried and speed of load. This is shown in the
top table below.
Energy Absorption Capacity of the Impact Dampening Piston Seal
This chart represents the energy absorption capacity of the Impact Dampening piston seals with standard Non-Adjustable air cushions.
The values given are usable pounds stoppable at stated piston speeds.
In/Sec
6
12
18
24
30
36
42
48
54
60
3/4
36.6
5.6
2.5
1.4
0.9
0.6
0.5
0.3
0.3
0.2
1-1/16
62.3
15.6
6.9
3.9
2.5
1.7
1.3
1.0
0.8
0.6
Cylinder Bore
1-1/4 1-1/2
74.5 115.5
18.6
28.9
8.3
12.8
4.7
7.2
3.0
4.6
2.1
3.2
1.5
2.4
1.2
1.8
0.9
1.4
0.7
1.2
2
2-1/2
258.9 421.1
64.7 105.3
28.8 46.8
16.2 26.3
10.4 16.8
7.2
11.7
5.3
8.6
4.0
6.6
3.2
5.2
2.6
4.2
The figures below represent total stroke loss (both ends) for the pressure indicated for new cylinders. The impact dampening seals will
take some compression set during operation of the cylinder and the stroke loss will decrease. To determine stroke loss for either the
head or cap, divide the value shown by 2
Cylinder Bore
PSI
3/4
1-1/16
1-1/4
1-1/2
2
2-1/2
0
.11
.12
.12
.14
.15
.17
20
.08
.09
.09
.10
.10
.12
40
.05
.06
.06
.07
.07
.08
60
.03
.04
.04
.04
.04
.05
80
.01
.02
.02
.02
.02
.02
100
0
0
0
0
0
0
The face of the Impact Dampening (Ecology) Piston Seal extends beyond the face of the machined aluminum piston. This
allows for energy absorption when the Impact Dampening Piston Seal contacts the head or cap and compresses. In
conjunction with the non-adjustable air cushions, the load is effectively stopped with minimal shock or vibration.
For complete "how to order" instructions on the Ecology Piston Seal Options, see ACT-6-22.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-6-21
EXAMPLE: Stainless Steel Body Air Cylinder – 1-1/16" Bore – 2" Stroke – Double Acting
– Pivot Mount – No Options
IMPORTANT: When using “X” in the model number, please be specific!
X=DESCRIBE IN DETAIL
R L D 0 2 A
1
2
3
4
5
6
–
D A P
7
8
A A 0 0
–
10 11 12 13
9
Series
Options
00
90
Bore Size
A
B
C
D
E
F
G
H
X
No Options
Standard Magnetic
Piston Only1
7/16"
9/16"
3/4"
1-1/16"
1-1/4"
1-1/2"
2"
2-1/2"
Special
1Magnetic
pistons will change
overall cylinder length.
See table on preceding page.
Special Designation
A
X
Standard
Special
Options
Full Inches of Stroke
00
01
02
03
04
05
06
07
08
09
10
11
12
0" Stroke
1" Stroke
2" Stroke
3" Stroke
4" Stroke
5" Stroke
6" Stroke
7" Stroke
8" Stroke
9" Stroke
10" Stroke
11" Stroke
12" Stroke
13
14
15
16
17
18
19
20
21
22
23
24
XX
13" Stroke
14" Stroke
15" Stroke
16" Stroke
17" Stroke
18" Stroke
19" Stroke
20" Stroke
21" Stroke
22" Stroke
23" Stroke
24" Stroke
Special
A
B
No Options
Viton Seals
C
D
Viton Seals and Bumpers
Ecology Piston Seals3
E
X
Special
2Bumpers on air side only with spring version
3DAD and DAP models only
Mounting Style
N
P
Nose Mount4
Pivot Mount
D
B
Double End Mount4
Front Block Mount
4Includes Mounting Nut
Fractional Inches of Stroke
A
B
C
D
E
F
0"
1/16"
1/8"
3/16"
1/4"
5/16"
G
H
J
K
M
N
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
Model
P
R
S
T
X
3/4"
13/16"
7/8"
15/16"
Special
SA
RA
NR
DA
DR
Non-Rotating Rod
Double Acting
5Double End Mount Only
ACT-6-22
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Section 7
Norgren Mini Roundline
Pneumatic Cylinder
Mini Roundline Cylinders ..........................................................ACT-7-2
Miniature Roundline cylinders
Single acting, Ø 2.5 & 4 mm
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-7-1
RM/59100/C
Miniature Roundline cylinders
Single acting, Ø 2.5 & 4 mm
Ideal for very light load applications such as function
testing mobile phones and keyboards
Low friction characteristics mean high speeds
No fittings required - all types feature one integral push
on barbed connector
Long service life and corrosion resistant materials mean
low cost of ownership
Technical data
Ordering information
Medium:
Compressed air, filtered, lubricated or non-lubricated
Operating pressure:
50.75 to 101.5 psig (3.5 to 7 bar)
Operating temperature:
32°F to 140°F (0°C to 60°C)
To order a basic 2.5mm diameter cylinder,
sprung in with a 10mm stroke quote:
RM/59102/C/10
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C)
Cylinder diameters:
2.5 and 4mm
Strokes:
5, 10 mm - Ø 2.5 mm
5, 10, 15, 20 mm - Ø 4 mm
Materials
Barrel: stainless steel
End caps: aluminum alloy
Piston rod: stainless steel
Elastomers: nitrile
ACT-7-2
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
RM/59100/C
Theoretical forces ● Air consumption ● Weight of cylinders
Ø mm
Air consumption in3/cm (I/cm) at 6 bar
Instroke
Outstroke
Theoretical forces lb (N) at 87 psig (6 bar)
Outstroke
F1
2.5
4
0.65 (2.9)
1.70 (7.6)
0.15 (0.7)
0.26 (1.2)
0.06 (0.001)
0.18 (0.003)
0.06 (0.001)
0.18 (0.003)
5 mm
0.004 (0.002)
0.006 (0.003)
Weight lb (kg) by stroke length
10 mm
15 mm
0.004 (0.002)
0.008 (0.004)
20 mm
–
0.010 (0.005)
–
0.012(0.006)
F1 = Return force
Options selector
Standard strokes
RM/591★★/C/★★
Strokes (mm)
Standard strokes only - see ‘Standard strokes’
Ø
2.5
4
Cylinder
Strokes (mm)
Ø mm
5
10
15
20
2.5
4
●
●
●
●
●
●
Substitute
02
04
Basic dimensions
4
RM/59102/C/5
RM/59102/C/10
RM/59104/C/5
RM/59104/C/10
RM/59104/C/15
RM/59104/C/20
ø1
ø 3,5
1,6
ø 3,2
M2,5 x 0,45
RM/59102/C
1,5
B
3,5
5
A
Ø
2.5
2.5
4
4
4
4
A
1.04
1.40
1.46
1.81
2.17
2.52
B
(26.5)
(35.5)
(37)
(46)
(55)
(64)
0.65
1.00
0.75
1.10
1.46
1.81
(16.5)
(25.5)
(19)
(28)
(37)
(46)
3
5
ø 3,2
1,6
ø5
M4
M2 x 0,4
RM/59104/C
6
4
7
B
5
6
A
Note: push-on connector is suitable for 5/32 Inch O/D, 0.106 Inch I/D (4mm O/D, 2.5 mm I/D) polyurethane tubing
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-7-3
Section 8
Series 90000 Compact
Actuators
Single and Double Acting 1/2" to
4" bore sizes
Series 92000 DoubleActing Compact Cylinder Features . . . . . . . . . . . . . . . . . . . . . .ACT-8-2
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-3
Type /M Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-4
Rear Flange Mount ‘B’, Front Flange Mount ‘G’ and Foot Mount ‘C’ . . . . . . . . . . . . . .ACT-8-6
Piston Rod Clevis Mount ‘F’, Back to Back Mounting Kit, How to Order Mounts . . . . .ACT-8-7
Type /JM Double Ended Piston Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-8
Type /N2 Internal Non-rotating Piston Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-9
Type /N4 External Non-rotating Guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-10
How to Order Double Acting Compact Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-11
Spares Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-11
Series 91000 and Series 93000 Single Acting Compact Cylinder Features . . . . . .ACT-8-12
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-13
Type /M Basic Single Acting Spring Return and Spring Extend . . . . . . . . . . . . . . . .ACT-8-14
Rear Flange Mount ‘B’, Front Flange Mount ‘G’ and Foot Mount ‘C’ . . . . . . . . . . . . .ACT-8-16
Piston Rod Clevis Mount ‘F’, Back to Back Mounting Kit, How to Order Mounts . . . .ACT-8-17
Type /N2 Spring Return and Spring Extend Non-rotating Piston Rods . . . . . . . . . . .ACT-8-18
How to Order Single Acting Compact Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-19
Spares Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-19
M/40 Magnetically Operated Reed Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ACT-8-20
M/41, M/42 Magnetically Operated Solid State Switches . . . . . . . . . . . . . . . . . . . . .ACT-8-22
ACT-8-4 – Basic Double Acting
– 92000/M
ACT-8-8 – Double Acting with Double
Ended Piston Rod – 92000/JM
ACT-8-9 – Double Acting with Internal
Non-rotating Piston Rod – 92000/N2
ACT-8-10 – Double Acting with External
Non-rotating Guidance – 92000/N4
ACT-8-14 – Basic Single Acting
Spring Return – 91000/M
ACT-8-14 – Basic Single Acting
Spring Extend – 93000/M
ACT-8-18 – Single Acting Spring Return
with Non-rotating Piston Rod – 91000/N2
ACT-8-18 – Single Acting Spring Extend
with Non-rotating Piston Rod – 93000/N2
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-8-1
Series 90000 Compact Actuators
The finest materials for each Series 92000 component!
1 Rod Seal Wiper:
Polyurethane pressure energized and
wear-compensating.
5 Piston: Specially formulated polyacetal
on the smaller bore sizes and solid
aluminum on the larger bore sizes for
added strength and longevity.
2 Rod Bearing: Short Stroke version
6 Head/Cap: Anodized aluminum
with integrated bearing made of
anodized aluminum. Long Stroke
version incorporates a heavy duty
polyamide bearing.
8 Piston Magnet: All cylinders are
supplied with a specially molded piston
magnet; switches can be added later.
9 Piston Seal: Z-Seal is a pressure
energized bidirectional seal compounded
with nitrile rubber for excellent wear.
7 Extrusion: Complete with integral slots
for low profile position sensing switches.
10 Prelubricated: All cylinders are
prelubricated for dry air service.
ground and polished, hard chrome plated
for excellent protection against wear
and corrosion.
4
5
3
4 Tube Body: 6063 extruded aluminum
alloy, ideally suited for air service, clear
coat anodized corrosion resistant surface.
6
2
1
.394" (10mm)
Short Stroke Version Long Stroke Version
Short Stroke Version:
Designed for stroke lengths of
2" (50mm) and shorter, this
cylinder incorporates an
integrated bearing to make it
as compact as possible. The
integrated bushing makes the
overall length of the cylinder body
exactly .394" (10mm) shorter than the
Long Stroke version.
9
8
7
Medium:
6
Long Stroke Version:
Designed for stroke lengths greater
than 2" (50mm), cylinder incorporates
a longer bearing housing with a heavy
duty Polyamide rod bearing for
increased stability. The housing
increases the overall length of the
cylinder body .394" (10mm) longer
than the Short Stroke version.
Non-rotating Guidance Version:
/N4/ cylinder utilizes the Short Stroke
version and Long Stroke version cylinders
depending on stroke length.
High Temperature Version:
Non-rotating Piston Rod Version:
/N2/ cylinder has a special nonrotating bearing housing. As a result,
the cylinder overall body length is .394"
(10mm) longer.
ACT-8-2
or non-lubricated
Available on bore sizes 11/4" to 4" (32 to
100mm) double acting cylinders. Pistons
are made from brass or solid aluminum
and seals are changed to fluorocarbon for
temperatures up to 302°F (150°C). High
temperature reed switch TM/40 is available
for position sensing.
Brookville, OH USA
Phone 937-833-4033
Operation:
Double acting with magnetic piston
Operating Pressure:
14.5 to 145 PSI (1 to 10 bar)
23°* to 176°F (-5°* to 80°C)
*Consult Technical Service for use below
35°F (2°C)
Cylinder Diameters:
Nominal Inch:
1/2", 5/8", 3/4", 1", 11/4", 11/2", 2", 21/2", 31/8", 4"
12, 16, 20, 25, 32, 40, 50, 63, 80,100 mm
www.norgren.com
Cylinder Variations
Symbol
Model (magnetic piston)
DC/92000/JM inch cylinder
DM/92000/JM metric cylinder
RC/92000/N2 inch cylinder
RM/92000/N2 metric cylinder
DC/92000/N4 inch cylinder
DM/92000/N4 metric cylinder
Description
∅ 5/8", 3/4", 1", 11/4", 11/2", 2", 21/2", 31/8", 4"
(∅ 16, 20, 25, 32, 40, 50, 63, 80, 100 mm)
Internal non-rotating piston rod
∅ 5/8", 3/4", 1", 11/4", 11/2", 2", 21/2", 31/8", 4"
(∅ 16, 20, 25, 32, 40, 50, 63, 80, 100 mm)
External non-rotating guidance
∅ 5/8", 3/4", 1", 11/4", 11/2", 2", 21/2", 31/8", 4"
(∅ 16, 20, 25, 32, 40, 50, 63, 80, 100 mm)
See ACT-8-8 for dimensional and stroke length information
Theoretical Forces • Air Consumption • Torque for /N2 Cylinders
Ø Bore
Nominal
Inch
1/2"
5/8"
3/4"
1"
11/4"
11/2"
2"
21/2"
31/8"
4"
DC/92000/M inch, DM/92000/M metric
Theoretical forces at 87 PSI (6 bar)
Ø Bore Extend
Retract
mm
lbs. Force Newtons
lbs. Force
(12)
15.3
(68)
11.5
(16)
27.2
(121)
20.2
(20)
42.3
(188)
31.7
(25)
66.3
(295)
51.0
(32)
108.6
(483)
81.4
(40)
169.5
(754)
142.3
(50)
264.8
(1178)
222.6
(63)
420.4
(1870)
378.1
(80)
678.0
(3016)
611.7
(100) 1059.3
(4712)
993.2
Newtons
(51)
(90)
(141)
(227)
(362)
(633)
(990)
(1682)
(2721)
(4418)
DC/92000/M inch, DM/92000/M metric Air consumption
cubic inches/inch of stroke (Liters/cm of stroke)
Extend
Retract
Liters
Inch3
Liters
Inch3
1.240
(0.008)
1.085
(0.007)
2.170
(0.014)
1.705
(0.011)
3.410
(0.022)
2.635
(0.017)
5.425
(0.035)
4.185
(0.027)
8.680
(0.056)
6.510
(0.042)
13.640
(0.088)
11.470
(0.074)
21.390
(0.138)
17.980
(0.116)
33.790
(0.218)
30.380
(0.196)
54.560
(0.352)
49.290
(0.318)
85.250
(0.550)
79.825
(0.515)
Non-rotating piston rod permissible torque
RC/92000/N2 inch, RM/92000/N2 metric
Torque at 87 PSI (6 bar)
Max Torque
Model
Inch lbs.
.Nm
–
–
–
RC/92016/N2, RM/92016/N2 1.33
(0.15)
RC/92020/N2, RM/92020/N2 2.21
(0.25)
RC/92025/N2, RM/92025/N2 3.54
(0.40)
RC/92032/N2, RM/92032/N2 6.64
(0.75)
RC/92040/N2, RM/92040/N2 6.64
(0.75)
RC/92050/N2, RM/92050/N2 13.28
(1.50)
RC/92063/N2, RM/92063/N2 13.28
(1.50)
RC/92080/N2, RM/92080/N2 22.13
(2.50)
RC/92100/N2, RM/92100/N2 22.13
(2.50)
Weights of Cylinders and Mountings
Ø Bore
Nominal Ø Bore
Inch
mm
1/2"
(12)
5/8"
(16)
3/4"
(20)
1" (25)
11/4" (32)
11/2" (40)
2" (50)
21/2" (63)
31/8" (80)
4" (100)
DC/92000/M inch
DM/92000/M metric
Weight at
Weight per
zero stroke
inch
25mm
lbs
kg
lbs
kg
0.132 (0.060) 0.088 (0.040)
0.176 (0.080) 0.088 (0.040)
0.220 (0.100) 0.132 (0.060)
0.331 (0.150) 0.154 (0.070)
0.551 (0.250) 0.265 (0.120)
0.838 (0.380) 0.331 (0.150)
0.992 (0.450) 0.397 (0.180)
1.808 (0.820) 0.573 (0.260)
2.646 (1.200) 0.728 (0.330)
4.034 (1.830) 0.926 (0.420)
DC/92000/N4 inch
DM/92000/N4 metric
Weight at
Weight per
zero stroke
inch
25mm
lbs
kg
lbs
kg
–
–
–
–
0.243
(0.110) 0.110 (0.050)
0.287
(0.130) 0.154 (0.070)
0.375
(0.170) 0.220 (0.100)
0.617
(0.280) 0.287 (0.130)
0.970
(0.440) 0.331 (0.150)
1.102
(0.500) 0.441 (0.200)
1.984
(0.900) 0.661 (0.300)
2.976
(1.350) 0.772 (0.350)
4.850
(2.200) 1.323 (0.600)
Style ‘B’, ‘G’
lbs
kg
0.044 (0.020)
0.044 (0.020)
0.044 (0.020)
0.088 (0.040)
0.132 (0.060)
0.331 (0.150)
0.375 (0.170)
0.728 (0.330)
0.904 (0.410)
1.587 (0.720)
22 ø4''
kg
(0.010)
(0.010)
(0.010)
(0.010)
(0.020)
(0.020)
(0.040)
(0.090)
(0.220)
(0.220)
Nut
lbs
0.002
0.002
0.002
0.004
0.007
0.007
–
–
–
–
kg
(0.001)
(0.001)
(0.001)
(0.002)
(0.003)
(0.003)
–
–
–
–
Stud or Adaptor
lbs
kg
0.002 (0.001)
0.004 (0.002)
0.007 (0.003)
0.011 (0.005)
0.022 (0.010)
0.022 (0.010)
0.044 (0.020)
0.077 (0.035)
0.165 (0.075)
0.165 (0.075)
M
7
5
100
ø100
20
Style ‘F’
lbs
0.022
0.022
0.022
0.022
0.044
0.044
0.088
0.198
0.485
0.485
F
F
External Non-rotating Guidance
DC/92000/N4 inch, DM/92000/N4 metric
Permissible Load and Torque
Style ‘C’
lbs
kg
0.044 (0.020)
0.044 (0.020)
0.044 (0.020)
0.088 (0.040)
0.088 (0.040)
0.220 (0.100)
0.243 (0.110)
0.287 (0.130)
0.397 (0.180)
1.058 (0.480)
ø100
ø4''
90
6
70
ø31/8''
14 ø21/2''
12
5
ø80
60 ø63
3
ø2''
50 ø50
ø31/8''
ø11/2''
40 ø40
ø11/4''
30 ø32
8
F = Side Load (N)
F = Side Load (lbs.Force)
10
4
80
M = Torque Loading (ft lbs)
16
6 ø1''
ø3/4''
4 ø5/8''
2
0.5
1.0
1.5
2.0
Stroke Length (inches)
2.5
3.0
ø25
20 ø20
ø16
10
10 20 30 40
Stroke Length (mm)
50
60
Brookville, OH USA
70
80
4
ø80
M = Torque Loading (Nm)
18
2
ø21/2''
1 ø2''
ø11/2''
ø11/4''
ø1''
ø3/4''
ø5/8''
0.5 1.0 1.5 2.0
Stroke Length (inches)
Phone 937-833-4033
2.5
3.0
3.5
3
2
ø63
ø50
ø40
1 ø32
ø25
ø20
ø16
10 20 30 40 50
Stroke Length (mm)
www.norgren.com
60
70
80
90
ACT-8-3
Series 92000/M
•
Very compact – approximately one third the basic
length of a corresponding conventional cylinder
•
Entirely manufactured from corrosion
resistant materials
•
Standard magnetic piston provides a wide range
of control options
•
ø 1/2" to 4" (ø 12 to 100 mm)
Magnetic piston
Ordering Information
Non-Standard Options
To order a basic 31/8" bore cylinder with a 2 inch stroke
and magnetic piston, specify: DC/92080/M/2.0
• Hollow piston rod for blow-off or vacuum
• Additional mountings
To order a basic 63 mm bore cylinder with a 100 mm stroke
and magnetic piston, specify: DM/92063/M/100
• Force multiplication tandems
• Multi-position duplex
To order mounting accessories, refer to appropriate
cylinder mounting table on pages 6 and 7.
• Integrated control valve
Order magnetically operated switches M/40, M/41 and M/42
separately. See pages ACT-8-20/23.
■ ■ ■
1
T
2
–
3
9 2 ■ ■ ■
4
5
6
7
–
■ M
8
High Temperature
10
*
11
Stroke Length
In Inches for inch cylinder
In (mm) for metric cylinder
Piston Rod Material
D
Chrome Plated Stainless Steel
R
Stainless Steel (/N2/ only)
Cylinder Options
M Magnetic Piston
JM Double ended piston rod with magnetic piston
N2 Internal non-rotating piston rod with magnetic piston
N4 External non-rotating guidance with magnetic piston
Inch Cylinder
C
NPT ports, inch threads, stroke in inches
Metric Cylinder
M ISO G ports, metric threads, stroke in mm
9
Series 90000
Cylinder Version
2
Double Acting
ACT-8-4
9
–
Brookville, OH USA
Piston Diameters Nominal Inch (mm)
012 ø 1/2" 12 mm 040 ø 11/2"
016 ø 5/8" 16 mm 050 ø 2"
020 ø 3/4" 20 mm 063 ø 21/2"
025 ø 1"
25 mm 080 ø 31/8"
032 ø 11/4" 32 mm 100 ø 4"
Phone 937-833-4033
40 mm
50 mm
63 mm
80 mm
100 mm
www.norgren.com
TG2
ZJ + stroke
FF
WH
PL
Section X
PL
EE
RT**
MX
KF
PF
E
TG1
AF
øMM
øD
øJB
X
GB
Z
Section Z
.51" (13)
øFB
.11" (2.7)
BG
ZH + stroke
45
** Only the 4 front holes are tapped on stroke lengths of less than:
ø 1" and 11/4" (ø 25 and 32 mm)
.197" (5 mm)
.../N2 .197" (5 mm)
ø 11/2" and 21/2" (ø 40 and 63 mm) .591" (15 mm)
ø 2" and 3" (ø 50 and 80 mm)
.394" (10 mm)
ø 4" (ø 100 mm)
.984" (25 mm)
.../N2 .591" (15 mm)
NOTE: Ø 1/2" to 3/4" (Ø 12 to 20 mm)
have only two side dovetails.
.inch (mm)
.inch (mm)
.inch (mm)
.inch (mm)
.inch (mm) .inch (mm)
.1/2" (12)
.5/8" (16)
.3/4" (20)
.1"
(25)
1.1/4" (32)
1.1/2" (40)
Inch Cylinder
DC/92012/M
DC/92016/M
DC/92020/M
DC/92025/M
DC/92032/M
DC/92040/M
Metric Cylinder DM/92012/M
DM/92016/M
DM/92020/M
DM/92025/M
DM/92032/M
DM/92040/M
AF
.24 (6)
.28 (7)
.31 (8)
.35 (9)
.47 (12)
.47 (12)
BG
.35 (9)
.35 (9)
.35 (9)
.47 (12)
.47 (12)
.63 (16)
øD
1.28 (32.5) 1.44 (36.5) 1.63 (41.5) 1.89 (48)
2.28 (58)
2.81 (71.5)
❑E
.98 (25)
1.10 (28)
1.26 (32)
1.46 (37)
1.77 (45)
2.17 (55)
EE
10-32 (M 5) 10-32 (M 5) 10-32 (M 5) 10-32 (M 5)
1/8 NPT (G 1/8) 1/8 NPT (G 1/8)
ø FB
.13 (3.3)
.13 (3.3)
.13 (3.3)
.17 (4.2)
.17 (4.2)
.27 (6.8)
FF
.39 (10)
.39 (10)
.39 (10)
.39 (10)
.71 (18)
.71 (18)
GB
.14 (3.5)
.14 (3.5)
.14 (3.5)
.18 (4.5)
.18 (4.5)
.26 (6.5)
ø JB
.24 (6)
.24 (6)
.24 (6)
.30 (7.5)
.30 (7.5)
.41 (10.5)
KF
4-40 (M 3)
8-32 (M 4) 10-32 (M 5)
1/4-28 (M 6)
5/16-24 (M 8)
5/16-24 (M 8)
ø MM
.24 (6)
.31 (8)
.39 (10)
.47 (12)
.63 (16)
.63 (16)
MX
.19 (5)
.25 (6)
.31 (8)
.38 (10)
.50 (13)
.50 (13)
PF
.59 (15)
.67 (17)
.77 (19.5)
.87 (22)
1.08 (27.5) 1.24 (31.5)
PL
.28 (7)
.30 (7.5)
.30 (7.5)
.31 (8)
.35 (9)
.39 (10)
RT
8-32 (M 4)
8-32 (M 4)
8-32 (M 4) 10-32 (M 5) 10-32 (M 5)
5/16-24 (M 8)
TG 1
.67 (17)
.79 (20)
.91 (23)
1.06 (27)
1.30 (33)
1.61 (41)
TG 2
.51 (13)
.79 (20)
.91 (23)
1.06 (27)
1.30 (33)
1.61 (41)
WH
.18 (4.5)
.22 (5.5)
.24 (6)
.26 (6.5)
.26 (6.5)
.26 (6.5)
ZH
.94 (24)
.96 (24.5) 1.02 (26)
1.12 (28.5) 1.14 (29)
1.24 (31.5)
ZH Long Stroke –
–
1.36 (34.5) 1.42 (36)
1.52 (38.5) 1.54 (39)
1.63 (41.5)
ZJ
1.12 (28.5) 1.18 (30)
1.26 (32)
1.38 (35)
1.40 (35.5) 1.50 (38)
ZJ Long Stroke
–
–
1.57 (40)
1.65 (42)
1.77 (45)
1.79 (45.5) 1.89 (48)
ø
Bore
°
.inch (mm)
.2" (50)
DC/92050/M
DM/92050/M
.55 (14)
.63 (16)
3.19 (81)
2.48 (63)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
.41 (10.5)
3/8-24 (M 10)
.79 (20)
.66 (17)
1.46 (37)
.41 (10.5)
5/16-24 (M 8)
1.89 (48)
1.89 (48)
.31 (8)
1.38 (35)
1.77 (45)
1.69 (43)
2.09 (53)
.inch (mm)
2.1/2" (63)
DC/92063/M
DM/92063/M
.63 (16)
.79 (20)
4.09 (104)
3.15 (80)
1/4 NPT (G 1/4)
.33 (8.5)
.87 (22)
.33 (8.5)
.53 (13.5)
7/16-20 (M 12)
.79 (20)
.66 (17)
1.89 (48)
.51 (13)
3/8-24 (M 10)
2.40 (61)
2.40 (61)
.31 (8)
1.67 (42.5)
2.07 (52.5)
1.99 (50.5)
2.38 (60.5)
.inch (mm)
3.1/8" (80)
DC/92080/M
DM/92080/M
.87 (22)
.79 (20)
4.72 (120)
3.70 (94)
1/4 NPT (G 1/4)
.33 (8.5)
.87 (22)
.33 (8.5)
.53 (13.5)
1/2-20 (M 16)
.98 (25)
.81 (22)
2.24 (57)
.57 (14.5)
3/8-24 (M 10)
2.87 (73)
2.87 (73)
.35 (9)
1.85 (47)
2.24 (57)
2.20 (56)
2.60 (66)
.inch (mm)
.4" (100)
DC/92100/M
DM/92100/M
.87 (22)
.98 (25)
5.85 (148.5)
4.59 (116.5)
1/4 NPT (G 1/4)
.40 (10.2)
.87 (22)
.41 (10.5)
.65 (16.5)
1/2-20 (M 16)
.98 (25)
.81 (22)
2.64 (67)
.63 (16)
7/16-20 (M 12)
3.56 (90.5)
3.56 (90.5)
.39 (10)
1.90 (48.5)
2.30 (58.5)
2.30 (58.5)
2.70 (68.5)
Long Stroke versions, >2" (>50mm), incorporate a longer rod bearing. This increases the overall body by .394" (10mm). Explanation on ACT-8-2.
Maximum Stroke for 92000/M Double Acting Cylinders
DC/92000/M inch cylinder
Nominal Diameter
ø 1/2"
ø 5/8", 3/4", 1"
ø 11/4", 11/2"
ø 2", 21/2", 31/8", 4"
Maximum Stroke
2"
8"
10"
12"
Brookville, OH USA
DM/92000/M metric cylinder
Phone 937-833-4033
Diameter
ø 12 mm
ø 16, 20, 25 mm
ø 32, 40 mm
ø 50, 63, 80, 100 mm
www.norgren.com
Maximum Stroke
50 mm
200 mm
250 mm
300 mm
ACT-8-5
Rear Flange – Mount ‘B’
E
MF
Front Flange – Mount ‘G’
MF
R
UF
TF
ZF + stroke
.inch (mm)
.1/2" (12)
Inch Cylinder
QC/90012/22
Metric Cylinder QM/90012/22
E
.98 (26)
ø FB
.14 (3.5)
MF
.20 (5)
R
.71 (18)
TF
1.50 (38)
UF
1.81 (46)
W
-.02 (- 0.5)
ZF
1.32 (33.5)
ZF Long Stroke* –
–
ZJ
1.12 (28.5)
ø
Bore
.inch (mm)
.5/8" (16)
QC/90016/22
QM/90016/22
1.18 (30)
.14 (3.5)
.20 (5)
.87 (22)
1.65 (42)
1.97 (50)
.02 (0.5)
1.38 (35)
1.77 (45)
1.18 (30)
W
FB
.inch (mm)
.3/4" (20)
QC/90020/22
QM/90020/22
1.30 (33)
.14 (3.5)
.20 (5)
.98 (25)
1.89 (48)
2.20 (56)
.04 (1)
1.46 (37)
1.85 (47)
1.26 (32)
.inch (mm)
.1"
(25)
QC/90025/22
QM/90025/22
1.50 (38)
.18 (4.5)
.26 (6.5)
1.10 (28)
2.13 (54)
2.52 (64)
0
(0)
1.63 (41.5)
2.03 (51.5)
1.38 (35)
.inch (mm)
1.1/4" (32)
QC/90032/22
QM/90032/22
1.81 (46)
.18 (4.5)
.26 (6.5)
1.42 (36)
2.60 (66)
2.99 (76)
0
(0)
1.65 (42)
2.05 (52)
1.40 (35.5)
.inch (mm)
1.1/2" (40)
QC/90040/22
QM/90040/22
2.24 (57)
.26 (6.5)
.37 (9.5)
1.69 (43)
3.07 (78)
3.62 (92)
-.12 (- 3)
1.87 (47.5)
2.26 (57.5)
1.50 (38)
ZJ + stroke
.inch (mm)
.2" (50)
QC/90050/22
QM/90050/22
2.52 (64)
.26 (6.5)
.37 (9.5)
1.97 (50)
3.54 (90)
4.09 (104)
-.04 (- 1)
2.07 (52.5)
2.46 (62.5)
1.69 (43)
.inch (mm)
2.1/2" (63)
QC/90063/22
QM/90063/22
3.19 (81)
.33 (8.5)
.49 (12.5)
2.48 (63)
4.33 (110)
5.04 (128)
-.18 (- 4.5)
2.50 (63.5)
2.89 (73.5)
1.99 (50.5)
.inch (mm).
3.1/8" (80)
QC/90080/22
QM/90080/22
3.74 (95)
.33 (8.5)
.49 (12.5)
3.03 (77)
5.04 (128)
5.75 (146)
-.14 (- 3.5)
2.70 (68.5)
3.09 (78.5)
2.20 (56)
inch (mm)
.4"
(100)
QC/90100/22
QM/90100/22
4.65 (118)
.43 (11)
.49 (12.5)
3.86 (98)
6.14 (156)
6.93 (176)
-.10 (- 2.5)
2.81 (71.5)
3.21 (81.5)
2.30 (58.5)
inch (mm)
3 1/8" (80)
QC/90080/21
QM/90080/21
.33 (8.4)
1.93 (49)
.31 (8)
1.00 (25.5)
.53 (13.5)
.33 (8.5)
.22 (5.5)
2.46 (62.5)
2.85 (72.5)
1.73 (44)
3.74 (95)
2.52 (64)
2.91 (74)
inch (mm)
4"
(100)
QC/90100/21
QM/90100/21
.41 (10.5)
2.34 (59.5)
.37 (9.5)
1.12 (28.5)
.65 (16.5)
.41 (10.5)
.26 (6.5)
2.66 (67.5)
3.05 (77.5)
2.20 (56)
4.65 (118)
2.68 (68)
3.07 (78)
NOTE: Dimension ‘W’ negative figures indicate that the piston rod is below the mounting face.
*For non-rotating rod cylinders RC/92000/N2 and RM/92000/N2, use long stroke dimensions.
XA + stroke
Foot Mount – Style ‘C’
DG
AH
AAT
ø AB
H
ø DB
AO
SA + stroke
TR
UL
inch (mm)
1/2"
(12)
Inch Cylinder
QC/90012/21
Metric Cylinder QM/90012/21
ø AB
.13 (3.4)
AH
.53 (13.5)
AO
.16 (4)
AT
.37 (9.5)
ø DB
.24 (6)
DG
.14 (3.5)
H
.08 (2)
SA
1.26 (32)
SA Long Stroke* –
–
TR
.98 (25)
UL
1.30 (33)
XA
1.28 (32.5)
XA Long Stroke* –
–
ø
Bore
inch (mm)
5/8" (16)
QC/90016/21
QM/90016/21
.13 (3.4)
.59 (15)
.16 (4)
.37 (9.5)
.24 (6)
.14 (3.5)
.08 (2)
1.28 (32.5)
1.67 (42.5)
1.26 (32)
1.57 (40)
1.34 (34)
1.73 (44)
inch (mm)
3/4"
(20)
QC/90020/21
QM/90020/21
.13 (3.4)
.65 (16.5)
.16 (4)
.37 (9.5)
.24 (6)
.14 (3.5)
.08 (2)
1.34 (34)
1.73 (44)
1.38 (35)
1.69 (43)
1.42 (36)
1.81 (46)
inch (mm)
1" (25)
QC/90025/21
QM/90025/21
.17 (4.3)
.79 (20)
.20 (5)
.49 (12.5)
.30 (7.5)
.18 (4.5)
.12 (3)
1.50 (38)
1.89 (48)
1.61 (41)
2.01 (51)
1.55 (39.5)
1.95 (49.5)
inch (mm)
11/4" (32)
QC/90032/21
QM/90032/21
.17 (4.3)
.91 (23)
.20 (5)
.49 (12.5)
.30 (7.5)
.18 (4.5)
.12 (3)
1.52 (38.5)
1.91 (48.5)
.75 (19)
1.81 (46)
1.57 (40)
1.97 (50)
inch (mm)
11/2" (40)
QC/90040/21
QM/90040/21
.25 (6.4)
1.12 (28.5)
.26 (6.5)
.63 (16)
.41 (10.5)
.26 (6.5)
.18 (4.5)
1.75 (44.5)
2.15 (54.5)
.83 (21)
2.20 (56)
1.75 (44.5)
2.15 (54.5)
inch (mm)
2"
(50)
QC/90050/21
QM/90050/21
.25 (6.4)
1.26 (32)
.26 (6.5)
.63 (16)
.41 (10.5)
.26 (6.5)
.18 (4.5)
1.87 (47.5)
2.26 (57.5)
1.06 (27
2.52 (64)
1.93 (49)
2.32 (59)
inch (mm)
2 1/2" (63)
QC/90063/21
QM/90063/21
.33 (8.4)
1.63 (41.5)
.31 (8)
.87 (22)
.53 (13.5)
.33 (8.5)
.22 (5.5)
2.30 (58.5)
2.70 (68.5)
1.34 (34)
3.19 (81)
2.30 (58.5)
2.70 (68.5)
*For non-rotating rod cylinders RC/92000/N2 and RM/92000/N2, use long stroke dimensions.
ACT-8-6
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Piston Rod Clevis – Mount ‘F’
CE
RK
CL
A
CM
KW
B
LE
KF
KK
ø CK
.inch (mm)
.1/2" (12)
Inch
RC-12
Clevis
Metric
QM/57008/25
Inch
C-653-24-00J
Stud
Metric
M/P1710/18
Inch
C-76-36
Nut
Metric
M/P1500/111
Adaptor Metric –
A
.50 (12)
B
–
–
CE
.63 (11)
ø CK
.19 (3)
❑ CL
.31 (6)
CM
.16 (3)
ER
–
(4.5)
KF
4-40 (M 3)
KK
4-40 (M 3)
KV (A/F)
.25 (6)
KW
.09 (2)
LE
.22 (5)
RK
.50 (10)
ø
Bore
.inch (mm)
.inch (mm)
.5/8" (16)
.3/4" (20)
RC-16
RC-20
QM/8010/25
QM/92020/25
C-653-04-00M C-653-05-00P
M/P1710/19
M/P1710/20
C-76-37
C-76-225
M/P1501/80
M/P1501/109
–
–
.63 (16)
.75 (20)
–
–
–
–
.63 (16)
.75 (20)
.19 (4)
.19 (5)
.31 (8)
.38 (10)
.16 (4)
.20 (5)
–
(6.5)
–
(8)
8-32 (M 4) 10-32 (M 5)
8-32 (M 4) 10-32 (M 5)
.31 (7)
.38 (8)
.13 (2)
.13 (2.5)
.22 (8)
.37 (10)
.50 (11.5)
.66 (14.5)
CL
.inch (mm)
.1" (25)
RC-25
QM/57016/25
C-653-08-01A
M/P1710/21
C-76-03A
M/P1501/79
–
1.00 (25)
–
–
.94 (20)
.25 (5)
.50 (10)
.26 (5)
–
(8)
1/4-28 (M 6)
1/4-28 (M 6)
.44 (10)
.17 (3)
.44 (10)
.85 (14.5)
ER
KV
.inch (mm)
1.1/4" (32)
RC-32
QM/57020/25
C-653-11-01A
M/P1710/22
C-76-04A
M/P1501/60
–
1.00 (25)
–
–
.94 (24)
.25 (6)
.50 (12)
.26 (6)
–
(9.5)
5/16-24 (M 8)
5/16-24 (M 8)
.50 (13)
.19 (4)
.44 (12)
.85 (17.5)
.inch (mm)
1.1/2" (40)
RC-32
QM/57020/25
C-653-11-01A
M/P1710/22
C-76-04A
M/P1501/60
–
1.00 (25)
–
–
.94 (24)
.25 (6)
.50 (12)
.26 (6)
–
(9.5)
5/16-24 (M 8)
5/16-24 (M 8)
.50 (13)
.19 (4)
.44 (12)
.85 (17.5)
.inch (mm)
.2" (50)
RC-50
QM/57025/25
C-653-14-01E
–
C-76-05A
–
M/P71470/1
1.25 (29)
.47 (12)
1.31 (26)
.38 (8)
.75 (14)
.38 (7)
–
(11.5)
3/8-24 (M 10)
.inch (mm)
2.1/2" (63)
RC-63
QM/57040/25
C-653-16-01P
–
C-76-065A
–
M/P71470/2
1.50 (35)
.59 (15)
1.31 (40)
.38 (10)
.75 (20)
.38 (10)
–
(16)
7/16-20 (M 12)
.inch (mm)
3.1/8" (80)
RC-80
QM/57063/25
C-653-18-01J
–
C-76-12A
–
M/P71470/3
1.75 (45)
.79 (20)
1.31 (56)
.38 (14)
.75 (27)
.38 (14)
–
(21)
1/2-20 (M 16)
.inch (mm)
.4" (100)
RC-80
QM/57063/25
C-653-18-01J
–
C-76-12A
–
M/P71470/3
1.75 (45)
.79 (20)
1.31 (56)
.38 (14)
.75 (27)
.38 (14)
–
(21)
1/2-20 (M 16)
3/8-24 (M 10 x 1.25) 7/16-20 (M 12 x 1.25)
1/2-20 (M 16 x 1.5)
1/2-20 (M 16 x 1.5)
.56
.22
.56
1.13
.75
.31
.56
1.13
.75
.31
.56
1.13
(12)
(5)
(12)
(20.5)
.69
.22
.56
1.13
(13)
(5)
(20)
(29)
(17)
(5)
(28)
(36.5)
(17)
(5)
(28)
(36.5)
NOTE: Clevis includes Pin. To order a complete piston rod clevis mount: Ø 1/2” to 4” or (Ø 12 to 40mm) = Clevis plus Stud and Nut. Ø 50 to 100mm = Clevis plus Adaptor.
Piston Rod Clevis will vary in design. Inch clevis and metric clevis are dimensionally different.
Back to Back Mounting Kit
L
ø
Bore
Inch
Metric
L
.inch (mm)
.inch (mm)
.inch (mm)
.inch (mm)
.inch (mm)
.inch (mm)
.inch (mm)
.inch (mm)
.inch (mm)
.inch (mm)
.5/8" (16)
.3/4" (20)
.1" (25)
1.1/4" (32)
1.1/2" (40)
.2" (50)
2.1/2" (63)
3.1/8" (80)
.4" (100)
.1/2" (12)
QC/92012/55
QC/92016/55
QC/92020/55
QC/92025/55
QC/92032/55
QC/92040/55
QC/92050/55
QC/92063/55
QC/92080/55
QC/92100/55
QM/92012/55 QM/92016/55 QM/92020/55 QM/92025/55 QM/92032/55 QM/92040/55 QM/92050/55 QM/92063/55 QM/92080/55 QM/92100/55
.39 (10)
.39 (10)
.39 (10)
.39 (10)
.39 (10)
.59 (15)
.59 (15)
.79 (20)
.79 (20)
1.00 (25)
Mounting Order Information
All Mountings are ordered separately and are normally mounted to the cylinder by the customer.
Flange Mount – Style ‘B’ and ‘G’
Mounting Kit
Mounting Kit
Piston Rod Clevis Mount –
Style ‘F’ Mounting Kit
Inch Cylinder: QC/90 – – – /22
Includes the flange and the inch
mounting screws to mount the
flange to the Inch version cylinder.
Includes the two foot mounts and
the inch mounting screws to mount
the feet to the Inch version cylinder.
Inch Cylinder:
Metric Cylinder: QM/90 – – – /22
Includes the flange and the metric
flange to the Metric version cylinder.
Includes two foot mounts and
the metric mounting screws to
mount the feet to the Metric
version cylinder.
To order a piston rod clevis
mounting complete for Inch
cylinders = Clevis plus Stud and
Nut. (Clevis includes pivot pin.)
Clevis RC- – –
Stud C-653- – – - – – –
Nut C-76- – – –
Brookville, OH USA
Metric Cylinder:
Clevis
Stud
Nut
Adaptor
QM/ – – – – – /25
M/P1710/– –
M/P1501/– – –
M/P71470/–
mounting complete for a Metric
cylinder for: ø 12 to 40mm =
Clevis plus Stud and Nut. ø 50 to
100mm = Clevis and Adaptor.
(Clevis includes pivot pin.)
Phone 937-833-4033
Inch cylinders: QC/ 92– – – /55
Includes the mounting plate and the
inch mounting screws to mount the
two Inch version cylinders back
to back.
Metric cylinders: QM/ 92– – – /55
metric mounting screws to mount the
two Metric version cylinders back
to back.
www.norgren.com
ACT-8-7
Section X
ZM + (2 x stroke)
TG2
ZJ 2 + stroke
FF
WH
PL
PL
EE
RT**
KF
MX
PF
E
AF
TG1
øMM
Section Z
øD
øJB
X
.51" (13)
GB
Z
ø 1" and 11/4" (ø 25 and 32 mm)
.197" (5 mm)
.../N2 .197" (5 mm)
ø 11/2" and 21/2" (ø 40 and 63 mm) .591" (15 mm)
ø 2" and 3" (ø 50 and 80 mm)
.394" (10 mm)
ø 4" (ø 100 mm)
.984" (25 mm)
.../N2 .591" (15 mm)
ø
Bore
Inch Cylinder
Metric Cylinder
AF
BG
øD
❑E
EE
ø FB
FF
GB
ø JB
KF
ø MM
MX
PF
PL
RT
TG 1
TG 2
WH
ZH 2
ZJ 2
ZM
.inch (mm)
.5/8" (16)
DC/92016/JM
DM/92016/JM
.28 (7)
.35 (9)
1.44 (36.5)
1.10 (28)
10-32 (M 5)
.13 (3.3)
.39 (10)
.14 (3.5)
.24 (6)
8-32 (M 4)
.31 (8)
.24 (6)
.67 (17)
.30 (7.5)
8-32 (M 4)
.79 (20)
.79 (20)
.22 (5.5)
1.16 (29.5)
1.37 (35)
1.61 (41)
.inch (mm)
.3/4" (20)
DC/92020/JM
DM/92020/JM
.31 (8)
.35 (9)
1.63 (41.5)
1.26 (32)
10-32 (M 5)
.13 (3.3)
.39 (10)
.14 (3.5)
.24 (6)
10-32 (M 5)
.39 (10)
.31 (8)
.77 (19.5)
.30 (7.5)
8-32 (M 4)
.91 (23)
.91 (23)
.24 (6)
1.24 (31.5)
1.48 (37.5)
1.73 (44)
.inch (mm)
.1"
(25)
DC/92025/JM
DM/92025/JM
.35 (9)
.47 (12)
1.89 (48)
1.46 (37)
10-32 (M 5)
.17 (4.2)
.39 (10)
.18 (4.5)
.30 (7.5)
1/4-28 (M 6)
.47 (12)
.39 (10)
.87 (22)
.31 (8)
10-32 (M 5)
1.06 (27)
1.06 (27)
.26 (6.5)
1.36 (34.5)
1.61 (41)
1.89 (48)
.11" (2.7)
øFB
BG
45
°
ZH 2 + stroke
NOTE: Ø 5/8" and 3/4" (Ø 16 and 20 mm)
.inch (mm)
1.1/4" (32)
DC/92032/JM
DM/92032/JM
.47 (12)
.47 (12)
2.28 (58)
1.77 (45)
1/8 NPT (G 1/8)
.17 (4.2)
.71 (18)
.18 (4.5)
.30 (7.5)
5/16-24 (M 8)
.63 (16)
.51 (13)
1.08 (27.5)
.35 (9)
10-32 (M 5)
1.30 (33)
1.30 (33)
.26 (6.5)
1.44 (36.5)
1.69 (43)
1.97 (50)
.inch (mm)
1.1/2" (40)
DC/92040/JM
DM/92040/JM
.47 (12)
.63 (16)
2.81 (71.5)
2.17 (55)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
.41 (10.5)
5/16-24 (M 8)
.63 (16)
.51 (13)
1.24 (31.5)
.39 (10)
5/16-24 (M 8)
1.61 (41)
1.61 (41)
.26 (6.5)
1.56 (39.5)
1.81 (46)
2.09 (53)
.inch (mm)
.2"
(50)
DC/92050/JM
DM/92050/JM
.55 (14)
.63 (16)
3.19 (81)
2.48 (63)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
.41 (10.5)
3/8-24 (M 10)
.79 (20)
.67 (17)
1.46 (37)
.41 (10.5)
5/16-24 (M 8)
1.89 (48)
1.89 (48)
.31 (8)
1.65 (42)
1.97 (50)
2.32 (59)
.inch (mm)
2.1/2" (63)
DC/92063/JM
DM/92063/JM
.63 (16)
.79 (20)
4.09 (104)
3.15 (80)
1/4 NPT (G 1/4)
.33 (8.5)
.87 (22)
.33 (8.5)
.53 (13.5)
7/16-20 (M 12)
.79 (20)
.67 (17)
1.89 (48)
.51 (13)
3/8-24 (M 10)
2.40 (61)
2.40 (61)
.31 (8)
2.04 (52)
2.36 (60)
2.72 (69)
.inch (mm)
3.1/8" (80)
DC/92080/JM
DM/92080/JM
.87 (22)
.79 (20)
4.72 (120)
3.70 (94)
1/4 NPT (G 1/4)
.33 (8.5)
.87 (22)
.33 (8.5)
.53 (13.5)
1/2-20 (M 16)
.98 (25)
.87 (22)
2.24 (57)
.57 (14.5)
3/8-24 (M 10)
2.87 (73)
2.87 (73)
.35 (9)
2.20 (56)
2.56 (65)
2.91 (74)
.inch (mm)
.4"
(100)
DC/92100/JM
DM/92100/JM
.87 (22)
.98 (25)
5.85 (148.5)
4.59 (116.5)
1/4 NPT (G 1/4)
.40 (10.2)
.87 (22)
.41 (10.5)
.65 (16.5)
1/2-20 (M 16)
.98 (25)
.87 (22)
2.64 (67)
.63 (16)
7/16-20 (M 12)
3.56 (90.5)
3.56 (90.5)
.39 (10)
2.28 (58)
2.68 (68)
3.07 (78)
■ D ■
1
T
2
–
3
9 2 ■ ■ ■
4
5
6
7
–
8
J M
9
10
–
*
11
Stroke Length
High Temperature
Piston Rod Material
D
Cylinder Options
JM Double Ended Piston Rod with Magnetic Piston
Inch Cylinder
C
Metric Cylinder
9
Series 90000
Cylinder Version
2
Double Acting
012 N/A
040 ø 11/2"
016 ø 5/8" 16 mm 050 ø 2"
020 ø 3/4" 20 mm 063 ø 21/2"
025 ø 1"
25 mm 080 ø 31/8"
032 ø 11/4" 32 mm 100 ø 4"
40 mm
50 mm
63 mm
80 mm
100 mm
Maximum Stroke for 92000/JM Double Ended Piston Rod Cylinders
DC/92000/JM inch cylinder
ACT-8-8
Nominal Diameter
ø 5/8", 3/4", 1", 11/4", 11/2"
2", 21/2", 31/8", 4"
Maximum Stroke
12"
Brookville, OH USA
DM/92000/JM metric cylinder
Phone 937-833-4033
Diameter
ø 16, 20, 25, 32, 40,
50, 63, 80, 100 mm
www.norgren.com
Maximum Stroke
300 mm
TG2
Section X
ZJ 1 + stroke
FF
PL
WH
PL
EE
RT**
KF
PF
MX 1
E
AF
TG1
øMM
Section Z
øD
øJB
X
.51"(13)
GB
Z
1
ø 1" and 1 /4" (ø 25 and 32 mm)
.197" (5 mm)
ø 11/2" and 21/2" (ø 40 and 63 mm) .197" (5 mm)
ø 2" and 3" (ø 50 and 80 mm)
.394" (10 mm)
ø 4" (ø 100 mm)
.591" (15 mm)
ø
Bore
Inch Cylinder
Metric Cylinder
AF
BG
øD
❑E
EE
ø FB
FF
GB
ø JB
KF
ø MM
MX 1
PF
PL
RT
TG 1
TG 2
WH
ZH 1
ZJ 1
.inch (mm)
.5/8" (16)
RC/92016/N2
RM/92016/N2
.28 (7)
.35 (9)
1.44 (36.5)
1.10 (28)
10-32 (M 5)
.13 (3.3)
.39 (10)
.14 (3.5)
.24 (6)
8-32 (M 4)
.31 (8)
.24 (6)
.67 (17)
.30 (7.5)
8-32 (M 4)
.79 (20)
.79 (20)
.22 (5.5)
1.36 (34.5)
1.57 (40)
.inch (mm)
.3/4" (20)
RC/92020/N2
RM/92020/N2
.31 (8)
.35 (9)
1.63 (41.5)
1.26 (32)
10-32 (M 5)
.13 (3.3)
.39 (10)
.14 (3.5)
.24 (6)
10-32 (M 5)
.39 (10)
.31 (8)
.77 (19.5)
.30 (7.5)
8-32 (M 4)
.91 (23)
.91 (23)
.24 (6)
1.42 (36)
1.65 (42)
.11" (2.7)
øFB
BG
45
ZH 1 + stroke
°
NOTE: Ø 5/8" and 3/4" (Ø 16 and 20 mm)
.inch (mm)
.1"
(25)
RC/92025/N2
RM/92025/N2
.35 (9)
.47 (12)
1.89 (48)
1.46 (37)
10-32 (M 5)
.17 (4.2)
.39 (10)
.18 (4.5)
.30 (7.5)
1/4-28 (M 6)
.47 (12)
.39 (10)
.87 (22)
.31 (8)
10-32 (M 5)
1.06 (27)
1.06 (27)
.26 (6.5)
1.52 (38.5)
1.77 (45)
.inch (mm)
1.1/4" (32)
RC/92032/N2
RM/92032/N2
.47 (12)
.47 (12)
2.28 (58)
1.77 (45)
1/8 NPT (G 1/8)
.17 (4.2)
.71 (18)
.18 (4.5)
.30 (7.5)
5/16-24 (M 8)
.63 (16)
.51 (13)
1.08 (27.5)
.35 (9)
10-32 (M 5)
1.30 (33)
1.30 (33)
.26 (6.5)
1.54 (39)
1.79 (45.5)
.inch (mm)
1.1/2" (40)
RC/92040/N2
RM/92040/N2
.47 (12)
.63 (16)
2.81 (71.5)
2.17 (55)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
.41 (10.5)
5/16-24 (M 8)
.63 (16)
.51 (13)
1.24 (31.5)
.39 (10)
5/16-24 (M 8)
1.61 (41)
1.61 (41)
.26 (6.5)
1.63 (41.5)
1.89 (48)
.inch (mm)
.2" (50)
RC/92050/N2
RM/92050/N2
.55 (14)
.63 (16)
3.19 (81)
2.48 (63)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
.41 (10.5)
3/8-24 (M 10)
.79 (20)
.63 (16)
1.46 (37)
.41 (10.5)
5/16-24 (M 8)
1.89 (48)
1.89 (48)
.31 (8)
1.77 (45)
2.09 (53)
.inch (mm)
2.1/2" (63)
RC/92063/N2
RM/92063/N2
.63 (16)
.79 (20)
4.09 (104)
3.15 (80)
1/4 NPT (G 1/4)
.33 (8.5)
.87 (22)
.33 (8.5)
.53 (13.5)
7/16-20 (M 12)
.79 (20)
.63 (16)
1.89 (48)
.51 (13)
3/8-24 (M 10)
2.40 (61)
2.40 (61)
.31 (8)
2.07 (52.5)
2.38 (60.5)
.inch (mm)
3.1/8" (80)
RC/92080/N2
RM/92080/N2
.87 (22)
.79 (20)
4.72 (120)
3.70 (94)
1/4 NPT (G 1/4)
.33 (8.5)
.87 (22)
.33 (8.5)
.53 (13.5)
1/2-20 (M 16)
.98 (25)
.83 (21)
2.24 (57)
.57 (14.5)
3/8-24 (M 10)
2.87 (73)
2.87 (73)
.35 (9)
2.24 (57)
2.60 (66)
.inch (mm)
.4" (100)
RC/92100/N2
RM/92100/N2
.87 (22)
.98 (25)
5.85 (148.5)
4.59 (116.5)
1/4 NPT (G 1/4)
.40 (10.2)
.87 (22)
.41 (10.5)
.65 (16.5)
1/2-20 (M 16)
.98 (25)
.83 (21)
2.64 (67)
.63 (16)
7/16-20 (M 12)
3.56 (90.5)
3.56 (90.5)
.39 (10)
2.30 (58.5)
2.70 (68.5)
D ■
2
–
3
9 2 ■ ■ ■
4
5
6
7
8
–
N 2
9
10
Piston Rod Material
D
R
Stainless Steel
–
*
11
Stroke Length
Inch Cylinder
C
Metric Cylinder
9
Cylinder Options
N2 Internal Non-rotating Piston Rod with Magnetic Piston
012 N/A
040 ø 11/2"
016 ø 5/8" 16 mm 050 ø 2"
020 ø 3/4" 20 mm 063 ø 21/2"
025 ø 1"
25 mm 080 ø 31/8"
032 ø 11/4" 32 mm 100 ø 4"
Series 90000
Cylinder Version
2
Double Acting
40 mm
50 mm
63 mm
80 mm
100 mm
Maximum Stroke for 92000/N2 Internal Non-rotating Piston Rod
RC/92000/N2 inch cylinder
Nominal Diameter
ø 5/8", 3/4", 1"
ø 11/4", 11/2"
ø 2", 21/2", 31/8", 4"
Maximum Stroke
8"
10"
12"
Brookville, OH USA
RM/92000/N2 metric cylinder
Phone 937-833-4033
Maximum Stroke
Diameter
200 mm
ø 16, 20, 25 mm
250 mm
ø 32, 40 mm
300 mm
ø 50, 63, 80, 100 mm
www.norgren.com
ACT-8-9
ZJ + stroke
øJB
WH
øFB
GB
PL
FF
PL
EE
BG
C
RT
Section Z
.51" (13)
PF
TT
E
H
TG
Bore
Inch Cylinder
Metric Cylinder
BG
C
øD
❑E
EE
ø FB
FF
GB
❏H
HF
ø JB
PF
PL
RT
❏ TG
TT
WH
ZH
ZH Long Stroke
ZJ
ZJ Long Stroke
.inch (mm)
.5/8" (16)
DC/92016/N4
DM/92016/N4
.35 (9)
.83 (21)
1.44 (36.5)
1.10 (28)
10-32 (M 5)
.13 (3.3)
.39 (10)
.14 (3.5)
1.02 (26.5)
.24 (6)
.24 (6)
.67 (17)
.30 (7.5)
8-32 (M 4)
.79 (20)
4-40 (M 3)
.45 (11.5)
.96 (24.5)
–
–
1.42 (36)
–
–
45
.inch (mm)
.3/4" (20)
DC/92020/N4
DM/92020/N4
.35 (9)
.98 (25)
1.63 (41.5)
1.26 (32)
10-32 (M 5)
.13 (3.3)
.39 (10)
.14 (3.5)
1.18 (30)
.31 (8)
.24 (6)
.77 (19.5)
.30 (7.5)
8-32 (M 4)
.91 (23)
4-40 (M 3)
.55 (14)
1.02 (26)
1.42 (36)
1.57 (40)
1.97 (50)
.inch (mm)
.1"
(25)
DC/92025/N4
DM/92025/N4
.47 (12)
1.16 (29.5)
1.89 (48)
1.46 (37)
10-32 (M 5)
.17 (4.2)
.39 (10)
.18 (4.5)
1.38 (35)
.31 (8)
.30 (7.5)
.87 (22)
.31 (8)
10-32 (M 5)
1.06 (27)
8-32 (M 4)
.57 (14.5)
1.12 (28.5)
1.52 (38.5)
1.69 (43)
2.09 (53)
.inch (mm)
1.1/4" (32)
DC/92032/N4
DM/92032/N4
.47 (12)
1.50 (38)
2.28 (58)
1.77 (45)
1/8 NPT (G 1/8)
.17 (4.2)
.71 (18)
.18 (4.5)
1.69 (43)
.39 (10)
.30 (7.5)
1.08 (27.5)
.35 (9)
10-32 (M 5)
1.30 (33)
8-32 (M 4)
.65 (16.5)
1.14 (29)
1.54 (39)
1.79 (45.5)
2.19 (55.5)
Z
.inch (mm)
1.1/2" (40)
DC/92040/N4
DM/92040/N4
.63 (16)
1.83 (46.5)
2.81 (71.5)
2.17 (55)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
2.05 (52)
.39 (10)
.41 (10.5)
1.24 (31.5)
.39 (10)
5/16-24 (M 8)
1.61 (41)
10-32 (M 5)
.65 (16.5)
1.24 (31.5)
1.63 (41.5)
1.89 (48)
2.28 (58)
°
NOTE: Ø 5/8" and 3/4"
(Ø 12 and 20 mm)
HF
ZH + stroke
ø
øD
.11" (2.7)
.inch (mm)
.2"
(50)
DC/92050/N4
DM/92050/N4
.63 (16)
2.22 (56.5)
3.19 (81)
2.48 (63)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
2.36 (60)
.47 (12)
.41 (10.5)
1.46 (37)
.41 (10.5)
5/16-24 (M 8)
1.89 (48)
1/4-28 (M 6)
.79 (20)
1.38 (35)
1.77 (45)
2.17 (55)
2.56 (65)
.inch (mm)
2.1/2" (63)
DC/92063/N4
DM/92063/N4
.79 (20)
2.80 (71)
4.09 (104)
3.15 (80)
1/4 NPT (G 1/4)
.33 (8.5)
.87 (22)
.33 (8.5)
2.99 (76)
.47 (12)
.53 (13.5)
1.89 (48)
.51 (13)
3/8-24 (M 10)
2.40 (61)
5/16-24 (M 8)
.79 (20)
1.67 (42.5)
2.07 (52.5)
2.46 (62.5)
2.85 (72.5)
.inch (mm)
3.1/8" (80)
DC/92080/N4
DM/92080/N4
.79 (20)
3.50 (89)
4.72 (120)
3.70 (94)
1/4 NPT (G 1/4)
.33 (8.5)
.87 (22)
.33 (8.5)
3.54 (90)
.63 (16)
.53 (13.5)
2.24 (57)
.57 (14.5)
3/8-24 (M 10)
2.87 (73)
3/8-24 (M 10)
.98 (25)
1.85 (47)
2.24 (57)
2.83 (72)
3.23 (82)
.inch (mm)
.4"
(100)
DC/92100/N4
DM/92100/N4
.98 (25)
4.33 (110)
5.85 (148.5)
4.59 (116.5)
1/4 NPT (G 1/4)
.40 (10.2)
.87 (22)
.41 (10.5)
4.45 (113)
.79 (20)
.65 (16.5)
2.64 (67)
.63 (16)
7/16-20 (M 12)
3.56 (90.5)
7/16-20 (M 12)
1.18 (30)
1.91 (48.5)
2.30 (58.5)
3.09 (78.5)
3.48 (88.5)
Long Stroke versions, > 2" (>50mm), incorporate a longer rod bearing. This increases the overall body by .394" (10mm). Explanation on ACT-8-2.
■ D ■
1
T
2
–
3
9 2 ■ ■ ■
4
5
6
7
–
8
N 4
9
10
High Temperature
–
*
11
Stroke Length
Piston Rod Material
D
Inch Cylinder
C
Metric Cylinder
9
Cylinder Options
N4 External Non-rotating Guidance with Magnetic Piston
012 N/A
040 ø 11/2"
016 ø 5/8" 16 mm 050 ø 2"
020 ø 3/4" 20 mm 063 ø 21/2"
025 ø 1"
25 mm 080 ø 31/8"
032 ø 11/4" 32 mm 100 ø 4"
Series 90000
Cylinder Version
2
Double Acting
40 mm
50 mm
63 mm
80 mm
100 mm
Maximum Stroke for 92000/N4 External Non-rotating Guidance
DC/92000/N4 inch cylinder
ACT-8-10
Nominal Diameter
Maximum Stroke
ø 5/8"
2"
ø 3/4", 1"
3"
ø 11/4", 11/2", 2", 21/2", 31/8", 4"
4"
Brookville, OH USA
DM/92000/N4 metric cylinder
Phone 937-833-4033
Maximum Stroke
Diameter
50 mm
ø 16 mm
80 mm
ø 20, 25 mm
100 mm
ø 32, 40, 50, 63, 80, 100 mm
www.norgren.com
■ D C
1
T
2
–
3
9 2 0 5 0
4
5
6
7
J M
–
8
9
1.62"
–
10
11
High Temperature
Stroke Length
In Inches for Inch Cylinder
In (mm) for Metric Cylinder
Piston Rod Material
D
R
Cylinder Options
M Magnetic Piston
JM Double Ended Piston Rod with Magnetic Piston
N4 External Non-rotating Guidance with Magnetic Piston
Inch Cylinder
C
NPT Ports, Inch Threads, Stroke in Inches
Metric Cylinder
M ISO G Ports, Metric Threads, Stroke in mm
9
Series 90000
Cylinder Version
2
Double Acting
012 ø 1/2" 12 mm 040 ø 11/2"
016 ø 5/8" 16 mm 050 ø 2"
020 ø 3/4" 20 mm 063 ø 21/2"
025 ø 1"
25 mm 080 ø 31/8"
032 ø 11/4" 32 mm 100 ø 4"
40 mm
50 mm
63 mm
80 mm
100 mm
NOTE: 012 not available in /JM/, /N2/, /N4/.
EXAMPLE: Chrome plated stainless steel – inch threads – Series 90000 – double acting – 2" diameter – double ended piston rod
with magnetic piston – 1.62 inch stroke length.
Spares Kits
2
9
11
2
DC/92000/M, DM/92000/M
Model
DC/92050/M, DM/92050/M, DC/92050/N4, DM/92050/N4, TDC/92050/M, TDM/92050/M
RC/92050/N2, RM/92050/N2
RC/92063/N2, RM/92063/N2
9
11
RC/92000/N2, RM/92000/N2
Spares kits ø 2" to 4"
(ø 50 to 100 mm)
QM/92050/00, TQM/92050/00
QM/92050/N2/00
QM/92063/00, TQM/92063/00
QM/92063/N2/00
QM/92080/00, TQM/92080/00
QM/92100/00, TQM/92100/00
Consisting
of Item
2
9
11
Description
Piston rod seal
Piston seal
Wear ring
Grease
Quantity
1
1
1
1
NOTE: Please specify the cylinder number when ordering spare parts. Spares are not available for Ø 1/2" to 11/2" (Ø 12 to 40 mm) models.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-8-11
The finest materials for each Series 91000 & 93000 component!
1 Rod Seal Wiper:
6 Head/Cap: Anodized aluminum
9 Piston Magnet: All cylinders are
Polyurethane pressure energized and
wear-compensating.
supplied with a specially molded piston
magnet; switches can be added later.
7 Springs: Premium quality spring
2 Rod Bearing: Short Stroke version
steel is used to create the force for single
acting cylinders.
with integrated bearing made of
anodized aluminum. Long Stroke
version incorporates a heavy duty
polyamide bearing.
10 Piston Seal: Z-Seal is a pressure
energized bidirectional seal compounded
with nitrile rubber for excellent wear.
8 Extrusion: Complete with integral slots
11 Prelubricated: All cylinders are
prelubricated for dry air service.
for low profile position sensing switches.
ground and polished, hard chrome
plated for excellent protection against
wear and corrosion.
4
3
4 Tube Body: 6063 extruded aluminum
5
alloy, ideally suited for air service, clear
coat anodized corrosion resistant surface.
5 Piston: Specially formulated
polyacetal on the smaller bore sizes and
solid aluminum on the larger bore sizes
for added strength and longevity.
2
6
1
10
9
8
.394" (10mm)
7
6
Short Stroke Version Long Stroke Version
Short Stroke Version:
Designed for stroke lengths of 2"
(50mm) and shorter, this cylinder
incorporates an integrated bearing to
make it as compact as possible. The
integrated bushing makes the overall
length of the cylinder body exactly
.394" (10mm) shorter than the Long
Stroke version.
ACT-8-12
Long Stroke Version:
Designed for stroke lengths greater
than 2" (50mm), cylinder incorporates
a longer bearing housing with a heavy
duty Polyamide rod bearing for
increased stability. The housing
increases the overall length of the
cylinder body .394" (10mm) longer
than the Short Stroke version.
Brookville, OH USA
Phone 937-833-4033
Non-rotating Piston Rod Version:
/N2/ cylinder has a special nonrotating bearing housing. As a result,
the cylinder overall body length is
.394" (10mm) longer.
www.norgren.com
Medium:
or non-lubricated
Operation:
91000/M Single acting, noncushioned, magnetic, spring return
93000/M Single acting, noncushioned, magnetic, spring extend
Torque for /N2 Cylinders
Operating Pressure:
Ø Bore
Nominal
Inch
1/2"
5/8"
3/4"
1"
11/4"
11/2"
2"
21/2"
29 to 145 PSI (2 to 10 bar)
23°F* to 176°F (-5°C* to +80°C)
*Consult Technical Service for use
below +35°F (+2°C)
Cylinder Diameters:
Nominal Inch
1/2", 5/8", 3/4", 1", 11/4", 11/2", 2", 21/2"
12, 16, 20, 25, 32, 40, 50, 63 mm
Ø Bore
mm
(12)
(16)
(20)
(25)
(32)
(40)
(50)
(63)
Non-rotating piston rod permissible torque
RC/91000/N2, RC/93000/N2 inch cylinders, RM/91000/N2, RM/93000/N2 metric cylinders
Torque at 87 PSI (6 bar)
Max Torque
Model
Inch lbs.
(Nm)
–
–
–
RC/91016/N2, RC/93016/N2, RM/91016/N2, RM/93016/N2
1.33 (0.15)
RC/91020/N2, RC/93020/N2, RM/91020/N2, RM/93020/N2
2.21 (0.25)
RC/91025/N2, RC/93025/N2, RM/91025/N2, RM/93025/N2
3.54 (0.40)
RC/91032/N2, RC/93032/N2, RM/91032/N2, RM/93032/N2
6.64 (0.75)
RC/91040/N2, RC/93040/N2, RM/91040/N2, RM/93040/N2
6.64 (0.75)
RC/91050/N2, RC/93050/N2, RM/91050/N2, RM/93050/N2
13.28 (1.50)
RC/91063/N2, RC/93063/N2, RM/91063/N2, RM/93063/N2
13.28 (1.50)
Cylinder Variations
Symbol
Theoretical Forces
Ø Bore
Nominal
Inch
1/2"
5/8"
3/4"
1"
11/4"
11/2"
2"
21/2"
Ø Bore mm
(12)
(16)
(20)
(25)
(32)
(40)
(50)
(63)
Model (magnetic piston)
RC/91000/N2, RM/91000/N2
Description
Non-rotating piston rod ø 5/8", 3/4", 1", 11/4", 11/2", 2", 21/2" spring retract
(ø 16, 20, 25, 32, 40, 50, 63 mm) spring retract
See ACT-8-18 for dimensional and
stroke length information.
RC/93000/N2, RM/93000/N2
Non-rotating piston rod ø 5/8", 3/4", 1", 11/4", 11/2", 2", 21/2" spring extend
(ø 16, 20, 25, 32, 40, 50, 63 mm) spring extend
See ACT-8-18 for dimensional and
stroke length information.
●
Air Consumption
Extend
Return force of spring
lbs Force
(N)
lbs Force (N)
12.8
(57)
1.57
(7)
23.2
(103)
2.81
(12.5)
36.2
(161)
3.26
(14.5)
59.3
(264)
4.50
(20)
97.1
(432)
7.19
(32)
154.4
(687)
9.89
(44)
245.9
(1094)
12.70
(56.5)
397.9
(1770)
16.75
(74.5)
Retract
Return force of spring
lbs Force (N)
lbs Force (N)
9.0
(40)
1.57
(7)
16.2
(72)
2.81
(12.5)
26.8
(119)
3.26
(14.5)
44.3
(197)
4.50
(20)
70.0
(311)
7.19
(32)
127.3
(566)
9.89
(44)
203.7
(906)
12.70
(56.5)
355.6
(1582)
16.75
(74.5)
DC/91000/M, DC/93000/M inch Air consumption
DM/91000/M, DM/93000/M metric
inches3/inch (Liters/cm)
Extend
Retract
Inch3
Liters
Inch3
Liters
1.240
(0.008)
1.085
(0.007)
2.170
(0.014)
1.705
(0.011)
3.410
(0.022)
2.635
(0.017)
5.425
(0.035)
4.185
(0.027)
8.680
(0.056)
6.510
(0.042)
13.640
(0.088)
11.470
(0.074)
21.390
(0.138)
17.980
(0.116)
33.790
(0.218)
30.380
(0.196)
Weights of Cylinders and Mountings
Ø Bore
Nominal
Inch
1/2"
5/8"
3/4"
1"
11/4"
11/2"
2"
21/2"
Ø Bore
mm
(12)
(16)
(20)
(25)
(32)
(40)
(50)
(63)
Weight at
zero stroke
lbs
kg
0.154
(0.070)
0.198
(0.090)
0.265
(0.120)
0.375
(0.170)
0.617
(0.280)
0.970
(0.440)
1.102
(0.500)
1.984
(0.900)
Weight per
1/4 inch 5mm
lbs
kg
0.044
(0.020)
0.044
(0.020)
0.044
(0.020)
0.066
(0.030)
0.110
(0.050)
0.132
(0.060)
0.176
(0.080)
0.243
(0.110)
Style ‘B’, ‘G’
lbs
kg
0.044
(0.020)
0.044
(0.020)
0.044
(0.020)
0.088
(0.040)
0.132
(0.060)
0.331
(0.150)
0.375
(0.170)
0.728
(0.330)
Brookville, OH USA
Style ‘C’
lbs
0.044
0.044
0.044
0.088
0.088
0.220
0.243
0.287
kg
(0.020)
(0.020)
(0.020)
(0.040)
(0.040)
(0.100)
(0.110)
(0.130)
Style ‘F’
lbs
0.022
0.022
0.022
0.022
0.044
0.044
0.088
0.198
Phone 937-833-4033
kg
(0.010)
(0.010)
(0.010)
(0.010)
(0.020)
(0.020)
(0.040)
(0.090)
Nut
lbs
0.002
0.002
0.002
0.004
0.007
0.007
–
–
kg
(0.001)
(0.001)
(0.001)
(0.002)
(0.003)
(0.003)
–
–
www.norgren.com
Stud or Adaptor
lbs
kg
0.002
(0.001)
0.004
(0.002)
0.007
(0.003)
0.011
(0.005)
0.022
(0.010)
0.022
(0.010)
0.044
(0.020)
0.077
(0.035)
ACT-8-13
Series 91000/M & 93000/M
Single Acting Cylinders
● Very compact – approximately one third the basic
length of a corresponding conventional model
● Entirely manufactured from corrosion
resistant materials
● Standard magnetic piston provides a wide range
of control options
● ø 1/2" to 21/2" (ø 12 to 63 mm)
Magnetic, spring return
Magnetic, spring extend
Ordering Information
Non-Standard Options
To order a basic 21/2" bore cylinder, spring return with a 1 inch
stroke and magnet piston, specify: DC/91063/M/1.0
• Hollow piston rod for blow-off or vacuum
• Additional mountings
To order a basic 16 mm bore cylinder, spring extend with a
5 mm stroke and magnet piston, specify: DM/93016/M/5
• Force multiplication tandems
To order mounting accessories, refer to appropriate
cylinder mounting table on pages ACT-8-16/17.
• Multi-position duplex
• Integrated control valve
Order magnetically operated switches M/40, M/41 and M/42
separately. See pages ACT-8-20/23.
D ■
1
–
2
9 ■ ■ ■ ■
3
4
5
6
7
–
■ M
8
9
–
*
10
Stroke Length
Piston Rod Material
D
R
Cylinder Options
M Magnetic Piston
N2 Internal non-rotating piston rod with magnetic piston
Inch Cylinder
C
Metric Cylinder
9
Series 90000
012 ø 1/2" 12 mm 032 ø 11/4" 32 mm
016 ø 5/8" 16 mm 040 ø 11/2" 40 mm
020 ø 3/4" 20 mm 050 ø 2" 50 mm
025 ø 1"
25 mm 063 ø 21/2" 63 mm
Cylinder Version
1
3
ACT-8-14
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
DC/91000/M, DM/91000/M
DC/93000/M, DM/93000/M
TG2
ZJ + stroke + V
WH
PL
PL
EE*
ZJ + (2 x stroke) + V
WH + stroke PL
FF
PL
EE*
RT**
MX
PF
øFB
øMM
E
TG1
øD
X
X
ZH + stroke + V
GB
øJB
BG
Z
ZH + stroke + V
Section Z
* Port thread with inserted filter, do not obstruct
ø 1" and 11/4" (ø 25 and 32 mm)
.197" (5 mm)
.../N2 .197" (5 mm)
ø 11/2" and 21/2" (ø 40 and 63 mm) .591" (15 mm)
ø 2" (ø 50 mm)
.394" (10 mm)
Section X
.51" (13)
NOTE: Ø 1/2" to 3/4"
(Ø 12 to 20 mm)
have only two
side dovetails.
Ø Bore
Inch Cylinder
Metric Cylinder
Inch Cylinder
Metric Cylinder
AF
BG
ØD
❏E
EE
Ø FB
FF
GB
Ø JB
KF
Ø MM
MX
PF
PL
RT
TG 1
TG 2
V strokes 0 - 1" (25)
strokes > 1" (25)
WH
ZH
ZJ
45
°
KF
.11"
(2.7)
AF
.Inch (mm)
.1/2" (12)
DC/91012/M
DM/91012/M
DC/93012/M
DM/93012/M
.24 (6)
.35 (9)
1.28 (32.5)
.98 (25)
10-32 (M 5)
.13 (3.3)
.39 (10)
.14 (3.5)
.24 (6)
4-40 (M 3)
.24 (6)
.20 (5)
.59 (15)
.28 (7)
8-32 (M 4)
.67 (17)
.51 (13)
.55 (14)
–
–
.18 (4.5)
.94 (24)
1.12 (28.5)
.Inch (mm)
.5/8" (16)
DC/91016/M
DM/91016/M
DC/93016/M
DM/93016/M
.28 (7)
.35 (9)
1.44 (36.5)
1.10 (28)
10-32 (M 5)
.13 (3.3)
.39 (10)
.14 (3.5)
.24 (6)
8-32 (M 4)
.31 (8)
.24 (6)
.67 (17)
.30 (7.5)
8-32 (M 4)
.79 (20)
.79 (20)
.59 (15)
–
–
.22 (5.5)
.96 (24.5)
1.18 (30)
.Inch (mm)
.3/4" (20)
DC/91020/M
DM/91020/M
DC/93020/M
DM/93020/M
.31 (8)
.35 (9)
1.63 (41.5)
1.26 (32)
10-32 (M 5)
.13 (3.3)
.39 (10)
.14 (3.5)
.24 (6)
10-32 (M 5)
.39 (10)
.31 (8)
.77 (19.5)
.30 (7.5)
8-32 (M 4)
.91 (23)
.91 (23)
.67 (17)
1.34 (34)
.24 (6)
1.02 (26)
1.26 (32)
.Inch (mm)
.1" (25)
DC/91025/M
DM/91025/M
DC/93025/M
DM/93025/M
.35 (9)
.47 (12)
1.89 (48)
1.46 (37)
10-32 (M 5)
.17 (4.2)
.39 (10)
.18 (4.5)
.30 (7.5)
1/4-28 (M 6)
.47 (12)
.39 (10)
.87 (22)
.31 (8)
10-32 (M 5)
1.06 (27)
1.06 (27)
.71 (18)
1.42 (36)
.26 (6.5)
1.12 (28.5)
1.38 (35)
.Inch (mm)
1.1/4" (32)
DC/91032/M
DM/91032/M
DC/93032/M
DM/93032/M
.47 (12)
.47 (12)
2.28 (58)
1.77 (45)
1/8 NPT (G 1/8)
.17 (4.2)
.71 (18)
.18 (4.5)
.30 (7.5)
5/16-24 (M 8)
.63 (16)
.51 (13)
1.08 (27.5)
.35 (9)
10-32 (M 5)
1.30 (33)
1.30 (33)
.75 (19)
1.50 (38)
.26 (6.5)
1.14 (29)
1.40 (35.5)
.Inch (mm)
1.1/2" (40)
DC/91040/M
DM/91040/M
DC/93040/M
DM/93040/M
.47 (12)
.63 (16)
2.81 (71.5)
2.17 (55)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
.41 (10.5)
5/16-24 (M 8)
.63 (16)
.51 (13)
1.24 (31.5)
.39 (10)
5/16-24 (M 8)
1.61 (41)
1.61 (41)
.79 (20)
1.57 (40)
.26 (6.5)
1.24 (31.5)
1.50 (38)
.Inch (mm)
2."
(50)
DC/91050/M
DM/91050/M
DC/93050/M
DM/93050/M
.55 (14)
.63 (16)
3.19 (81)
2.48 (63)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
.41 (10.5)
3/8-24 (M 10)
.79 (20)
.67 (17)
1.46 (37)
.41 (10.5)
5/16-24 (M 8)
1.89 (48)
1.89 (48)
1.18 (30)
2.36 (60)
.31 (8)
1.38 (35)
1.69 (43)
.Inch (mm)
2.1/2" (63)
DC/91063/M
DM/91063/M
DC/93063/M
DM/93063/M
.63 (16)
.79 (20)
4.09 (104)
3.15 (80)
1/4 NPT (G 1/4)
.33 (8.5)
.87 (22)
.33 (8.5)
.41 (13.5)
7/16-20 (M 12)
.79 (20)
.67 (17)
1.89 (48)
.51 (13)
3/8-24 (M 10)
2.40 (61)
2.40 (61)
1.18 (30)
2.36 (60)
.31 (8)
1.67 (42.5)
1.99 (50.5)
Maximum Stroke for 91000/M & 93000/M Single Acting Cylinders
DC/91000/M spring return inch cylinder
Nominal Diameter
ø 1/2", 5/8"
ø 3/4", 1", 11/4", 11/2", 2", 21/2"
Maximum Stroke
3/8"
2"
DC/93000/M spring extend inch cylinder
DM/91000/M spring return metric cylinder
Diameter
ø 12,16 mm
ø 20, 25, 32, 40, 50, 63 mm
Maximum Stroke
10 mm
50 mm
DM/93000/M spring extend metric cylinder
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-8-15
DC/91000/M, DM/91000/M, RC/91000/N2, RM/91000/N2
Rear Flange Mount ‘B’
Front Flange Mount ‘G’
E
MF
DC/93000/M, DM/93000/M
RC/93000/N2, RM/93000/N2
MF
R
XA + stroke + V
UF
TF
AT
H
AO
SA + stroke + V
ZF + stroke + V
ø Bore
Inch Cylinder
Metric Cylinder
E
ø FB
MF
R
TF
UF
V strokes 0 - 1" (25)
strokes > 1" (25)
W
ZF
ZF*
ZJ
.Inch (mm)
.1/2" (12)
QC/90012/22
QM/90012/22
1.02 (26)
.14 (3.5)
.20 (5)
.71 (18)
1.50 (38)
1.81 (46)
.55 (14)
–
–
-.02 (- 0.5)
1.32 (33.5)
1.71 (43.5)
1.12 (28.5)
W
øFB
.Inch (mm)
.5/8" (16)
QC/90016/22
QM/90016/22
1.18 (30)
.14 (3.5)
.20 (5)
.87 (22)
1.65 (42)
1.97 (50)
.59 (15)
–
–
.02 (0.5)
1.38 (35)
1.77 (45)
1.18 (30)
.Inch (mm)
.3/4" (20)
QC/90020/22
QM/90020/22
1.30 (33)
.14 (3.5)
.20 (5)
.98 (25)
1.89 (48)
2.20 (56)
.67 (17)
1.34 (34)
.04 (1)
1.46 (37)
1.85 (47)
1.26 (32)
ZJ + stroke + V
.Inch (mm)
.1" (25)
QC/90025/22
QM/90025/22
1.50 (38)
.18 (4.5)
.26 (6.5)
1.10 (28)
2.13 (54)
2.52 (64)
.71 (18)
1.42 (36)
0
(0)
1.63 (41.5)
2.03 (51.5)
1.38 (35)
.Inch (mm)
1.1/4" (32)
QC/90032/22
QM/90032/22
1.81 (46)
.18 (4.5)
.26 (6.5)
1.42 (36)
2.60 (66)
2.99 (76)
.75 (19)
1.50 (38)
0
(0)
1.77 (45)
2.17 (55)
1.40 (35.5)
.Inch (mm)
1.1/2" (40)
QC/90040/22
QM/90040/22
2.24 (57)
.26 (6.5)
.37 (9.5)
1.69 (43)
3.07 (78)
3.62 (92)
.79 (20)
1.57 (40)
-.12 (- 3)
1.87 (47.5)
2.26 (57.5)
1.50 (38)
.Inch (mm)
2."
(50)
QC/90050/22
QM/90050/22
2.52 (64)
.26 (6.5)
.37 (9.5)
1.97 (50)
3.54 (90)
4.09 (104)
1.18 (30)
2.36 (60)
-.04 (- 1)
2.07 (52.5)
2.46 (62.5)
1.69 (43)
.Inch (mm)
2.1/2" (63)
QC/90063/22
QM/90063/22
3.19 (81)
.33 (8.5)
.49 (12.5)
2.48 (63)
4.33 (110)
5.04 (128)
1.18 (30)
2.36 (60)
-.18 (- 4.5)
2.50 (63.5)
2.89 (73.5)
1.99 (50.5)
NOTE: Dimension ‘W’ negative figures indicate that the piston rod is below the mounting face.
*Non-rotating rod cylinders RC/91000/N2, RM/91000/N2, RC/93000/N2 and RM/93000/N2 incorporate a longer rod bearing. This increases the overall body by .394" (10mm). See ACT-8-12.
XA + 2 x stroke + V
XA + stroke + V
Foot Mount Style ‘C’
DG
AH
AT
ø AB
H
ø DB
TR
UL
ø
Bore
Inch Cylinder
Metric Cylinder
ø AB
AH
AO
AT
ø DB
DG
H
SA
SA*
TR
UL
XA
XA*
.Inch (mm)
.1/2" (12)
QC/90012/21
QC/90012/21
.13 (3.4)
.53 (13.5)
.16 (4)
.37 (9.5)
.24 (6)
.14 (3.5)
.08 (2)
1.26 (32)
1.65 (42)
.98 (25)
1.30 (33)
1.28 (32.5)
1.67 (42.5)
SA + stroke + V
AO
SA + stroke + V
DC/91000/M, DM/91000/M
RC/91000/N2, RM/91000/N2
.Inch (mm)
.5/8" (16)
QC/90016/21
QM/90016/21
.13 (3.4)
.59 (15)
.16 (4)
.37 (9.5)
.24 (6)
.14 (3.5)
.08 (2)
1.28 (32.5)
1.67 (42.5)
1.26 (32)
1.57 (40)
1.34 (34)
1.73 (44)
.Inch (mm)
.3/4" (20)
QC/90020/21
QM/90020/21
.13 (3.4)
.65 (16.5)
.16 (4)
.37 (9.5)
.24 (6)
.14 (3.5)
.08 (2)
1.34 (34)
1.73 (44)
1.38 (35)
1.69 (43)
1.42 (36)
1.81 (46)
.Inch (mm)
.1"
(25)
QC/90025/21
QM/90025/21
.17 (4.3)
.79 (20)
.20 (5)
.49 (12.5)
.30 (7.5)
.18 (4.5)
.12 (3)
1.52 (38.5)
1.91 (48.5)
1.61 (41)
2.01 (51)
1.57 (40)
1.97 (50)
DC/93000/M, DM/93000/M
RC/93000/N2, RM/93000/N2
.Inch (mm)
1.1/4" (32)
QC/90032/21
QM/90032/21
.17 (4.3)
.94 (24)
.20 (5)
.49 (12.5)
.30 (7.5)
.18 (4.5)
.12 (3)
1.54 (39)
1.93 (49)
.75 (19)
1.81 (46)
1.59 (40.5)
1.99 (50.5)
.Inch (mm)
1.1/2" (40)
QC/90040/21
QM/90040/21
.25 (6.4)
1.12 (28.5)
.26 (6.5)
.63 (16)
.41 (10.5)
.26 (6.5)
.18 (4.5)
1.75 (44.5)
2.15 (54.5)
.83 (21)
2.20 (56)
1.75 (44.5)
2.15 (54.5)
.Inch (mm)
2."
(50)
QC/90050/21
QM/90050/21
.25 (6.4)
1.26 (32)
.26 (6.5)
.63 (16)
.41 (10.5)
.26 (6.5)
.18 (4.5)
1.89 (48)
2.28 (58)
1.06 (27)
2.52 (64)
1.95 (49.5)
2.34 (59.5)
.Inch (mm)
2.1/2" (63)
QC/90063/21
QM/90063/21
.33 (8.4)
1.63 (41.5)
.31 (8)
.87 (22)
.53 (13.5)
.33 (8.5)
.22 (5.5)
2.30 (58.5)
2.70 (68.5)
1.34 (34)
3.19 (81)
2.30 (58.5)
2.70 (68.5)
*Non-rotating rod cylinders RC/91000/N2, RM/91000/N2, RC/93000/N2 and RM/93000/N2 incorporate a longer rod bearing. This increases the overall body by .394" (10mm). See ACT-8-12.
ACT-8-16
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Piston Rod Clevis Mount ‘F’
RK
CE
CL
A
CM
KW
B
øCK
LE
KF
KK
CL
KV
ER
ø
Bore
Clevis Inch
Metric
Stud Inch
Metric
Nut Inch
Metric
Adaptor Metric
A
B
CE
ø CK
❑ CL
CM
ER
KF
KK
KV (A/F)
KW
LE
RK
.inch (mm)
.1/2" (12)
RC-12
QM/57008/25
C-653-24-00J
M/P1710/18
C-76-36
M/P1500/111
–
.50 (12)
–
–
.63 (11)
.19 (3)
.31 (6)
.16 (3)
–
(4.5)
4-40 (M 3)
4-40 (M 3)
.25 (6)
.09 (2)
.22 (5)
.50 (10)
.inch (mm)
.5/8" (16)
RC-16
QM/8010/25
C-653-04-00M
M/P1710/19
C-76-37
M/P1501/80
–
.63 (16)
–
–
.63 (16)
.19 (4)
.31 (8)
.16 (4)
–
(6.5)
8-32 (M 4)
8-32 (M 4)
.31 (7)
.13 (2)
.22 (5)
.50 (10)
.inch (mm)
.3/4" (20)
RC-20
QM/92020/25
C-653-05-00P
M/P1710/20
C-76-225
M/P1501/109
–
.75 (20)
–
–
.75 (20)
.19 (5)
.38 (10)
.20 (5)
–
(8)
10-32 (M 5)
10-32 (M 5)
.38 (8)
.13 (2.5)
.37 (10)
.66 (14.5)
.inch (mm)
.1"
(25)
RC-25
QM/57016/25
C-653-08-01A
M/P1710/21
C-76-03A
M/P1501/79
–
1.00 (25)
–
–
.94 (20)
.25 (5)
.50 (10)
.26 (5)
–
(8)
1/4-28 (M 6)
1/4-28 (M 6)
.44 (10)
.17 (3)
.44 (10)
.85 (14.5)
.inch (mm)
1.1/4" (32)
RC-32
QM/57020/25
C-653-11-01A
M/P1710/22
C-76-04A
M/P1501/60
–
1.00 (25)
–
–
.94 (24)
.25 (6)
.50 (12)
.26 (6)
–
(9.5)
5/16-24 (M 8)
5/16-24 (M 8)
.50 (13)
.19 (4)
.44 (12)
.85 (17.5)
.inch (mm)
1.1/2" (40)
RC-32
QM/57020/25
C-653-11-01A
M/P1710/22
C-76-04A
M/P1501/60
–
1.00 (25)
–
–
.94 (24)
.25 (6)
.50 (12)
.26 (6)
–
(9.5)
5/16-24 (M 8)
5/16-24 (M 8)
.50 (13)
.19 (4)
.44 (12)
.85 (17.5)
.inch (mm)
.2"
(50)
RC-50
QM/57025/25
C-653-14-01E
–
C-76-05A
–
M/P71470/1
1.25 (29)
.47 (12)
1.31 (26)
.38 (8)
.75 (14)
.38 (7)
–
(11.5)
3/8-24 (M 10)
3/8-24 (M 10 x 1.25)
.56
.22
.56
1.13
.inch (mm)
2.1/2" (63)
RC-63
QM/57040/25
C-653-16-01P
–
C-76-065A
–
M/P71470/2
1.50 (35)
.59 (15)
1.31 (40)
.38 (10)
.75 (20)
.38 (10)
–
(16)
7/16-20 (M 12)
7/16-20 (M 12 x 1.25)
(12)
(5)
(12)
(20.5)
.69
.22
.56
1.13
(13)
(5)
(20)
(29)
NOTE: Clevis Includes Pin. To order a complete piston rod clevis mount: ø 1/2" to 2-1/2" (ø 12 to 40mm) = Clevis plus Stud and Nut. ø 50 and 63mm = Clevis plus Adaptor.
Piston Rod Clevis will vary in design. Inch clevis and metric clevis are dimensionally different.
L
ø
Bore
Inch
Metric
L
.inch (mm)
.1/2" (12)
QC/92012/55
QM/92012/55
.39 (10)
.inch (mm)
.5/8" (16)
QC/92016/55
QM/92016/55
.39 (10)
.inch (mm)
.3/4" (20)
QC/92020/55
QM/92020/55
.39 (10)
.inch (mm)
.1" (25)
QC/92025/55
QM/92025/55
.39 (10)
.inch (mm)
1.1/4" (32)
QC/92032/55
QM/92032/55
.39 (10)
.inch (mm)
1.1/2" (40)
QC/92040/55
QM/92040/55
.59 (15)
.inch (mm)
.2" (50)
QC/92050/55
QM/92050/55
.59 (15)
.inch (mm)
2.1/2" (63)
QC/92063/55
QM/92063/55
.79 (20)
Mounting Order Information
All Mountings are ordered separately and are normally mounted to the cylinder by the customer.
Flange Mount – Style ‘B’ and ‘G’
Mounting Kit
Mounting Kit
Piston Rod Clevis Mount –
Style ‘F’ Mounting Kit
Includes the flange and the inch
flange to the Inch version cylinder.
Includes the two foot mounts and
the inch mounting screws to mount
the feet to the Inch version cylinder.
Inch Cylinder:
Includes the flange and the metric
flange to the Metric version cylinder.
Includes two foot mounts and
the metric mounting screws to
mount the feet to the Metric
version cylinder.
mounting complete for Inch
cylinders = Clevis plus Stud and
Nut. (Clevis includes pivot pin.)
Clevis RC- – –
Stud C-653- – – - – – –
Nut C-76- – – –
Brookville, OH USA
Metric Cylinder:
Clevis
Stud
Nut
Adaptor
QM/ – – – – – /25
M/P1710/– –
M/P1501/– – –
M/P71470/–
mounting complete for a Metric
cylinder for: ø 12 to 40mm =
Clevis plus Stud and Nut. ø 50
and 63mm = Clevis and Adaptor.
(Clevis includes pivot pin.)
Phone 937-833-4033
Inch cylinders: QC/ 92– – – /55
inch mounting screws to mount the
two Inch version cylinders back
to back.
Metric cylinders: QM/ 92– – – /55
metric mounting screws to mount the
two Metric version cylinders back
to back.
www.norgren.com
ACT-8-17
DC/91000/N2, DM/91000/N2
TG2
DC/93000/N2, DM/93000/N2
ZJ1 + stroke + V
FF
PL
WH
RT**
Section X
PL
EE*
ZJ 1 + (2 x stroke) + V
KF
MX1
MX 1
PF
E
TG1
AF
øMM
øD
øJB
X
GB
Z
* Port thread with inserted filter, do not obstruct
** Only the 4 front holes are tapped on stroke
lengths of less than:
ø 1", 11/4", 11/2" and 21/2" (ø 25, 32, 40 and 63 mm) .197" (5 mm)
ø 2" (ø 50 mm)
.394" (10 mm)
.inch (mm)
.5/8" (16)
Inch Cylinder
RC/91016/N2
Metric Cylinder
RM/91016/N2
Inch Cylinder
RC/93016/N2
Metric Cylinder
RM/93016/N2
AF
.28 (7)
BG
.35 (9)
∅D
1.44 (36.5)
❏E
1.10 (28)
EE
10-32 (M 5)
∅ FB
.13 (3.3)
FF
.39 (10)
GB
.14 (3.5)
∅ JB
.24 (6)
KF
8-32 (M 4)
∅ MM
.31 (8)
MX 1
.24 (6)
PF
.67 (17)
PL
.30 (7.5)
RT
8-32 (M 4)
TG 1
.79 (20)
TG 2
.79 (20)
V strokes 0 to 1" (25)
.59 (15)
strokes > 1" (25)
–
–
WH
.22 (5.5)
ZH 1
1.36 (34.5)
ZJ 1
1.57 (40)
ø
.inch (mm)
.3/4" (20)
RC/91020/N2
RM/91020/N2
RC/93020/N2
RM/93020/N2
.31 (8)
.35 (9)
1.63 (41.5)
1.26 (32)
10-32 (M 5)
.13 (3.3)
.39 (10)
.14 (3.5)
.24 (6)
10-32 (M 5)
.39 (10)
.31 (8)
.77 (19.5)
.30 (7.5)
8-32 (M 4)
.91 (23)
.91 (23)
.67 (17)
1.34 (34)
.24 (6)
1.42 (36)
1.65 (42)
Bore
D ■
Cylinder Order
Information
1
øMM
2
Section Z
BG
ZH 1 + stroke + V
.51"(13)
NOTE: Ø 5/8" and 3/4"
(Ø 16 and 20 mm)
have only two side dovetails
ZH1 + stroke + V
.11" (2.7)
45
.inch (mm)
.1" (25)
RC/91025/N2
RM/91025/N2
RC/93025/N2
RM/93025/N2
.35 (9)
.47 (12)
1.89 (48)
1.46 (37)
10-32 (M 5)
.17 (4.2)
.39 (10)
.18 (4.5)
.30 (7.5)
1/4-28 (M 6)
.47 (12)
.39 (10)
.87 (22)
.31 (8)
10-32 (M 5)
1.06 (27)
1.06 (27)
.71 (18)
1.42 (36)
.26 (6.5)
1.52 (38.5)
11.77 (45)
–
X
øFB
°
.inch (mm)
1.1/4" (32)
RC/91030/N2
RM/91030/N2
RC/93030/N2
RM/93030/N2
.47 (12)
.47 (12)
2.28 (58)
1.77 (45)
1/8 NPT (G 1/8)
.17 (4.2)
.71 (18)
.18 (4.5)
.30 (7.5)
5/16-24 (M 8)
.63 (16)
.51 (13)
1.08 (27.5)
.35 (9)
10-32 (M 5)
1.30 (33)
1.30 (33)
.75 (19)
1.50 (38)
.26 (6.5)
1.54 (39)
1.79 (45.5)
9 ■ ■ ■ ■
3
4
5
6
7
.inch (mm)
1.1/2" (40)
RC/91040/N2
RM/91040/N2
RC/93040/N2
RM/93040/N2
.47 (12)
.63 (16)
2.81 (71.5)
2.17 (55)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
.41 (10.5)
5/16-24 (M 8)
.63 (16)
.51 (13)
1.24 (31.5)
.39 (10)
5/16-24 (M 8)
1.61 (41)
1.61 (41)
.79 (20)
1.57 (40)
.26 (6.5)
1.63 (41.5)
1.89 (48)
–
N 2
8
.inch (mm)
.2" (50)
RC/91050/N2
RM/91050/N2
RC/93050/N2
RM/93050/N2
.55 (14)
.63 (16)
3.19 (81)
2.48 (63)
1/8 NPT (G 1/8)
.27 (6.8)
.71 (18)
.26 (6.5)
.41 (10.5)
3/8-24 (M 10)
.79 (20)
.63 (16)
1.46 (37)
.41 (10.5)
5/16-24 (M 8)
1.89 (48)
1.89 (48)
1.18 (30)
2.36 (60)
.31 (8)
1.77 (45)
2.09 (53)
.inch (mm)
2.1/2" (63)
RC/91063/N2
RM/91063/N2
RC/93063/N2
RM/93063/N2
.63 (16)
.79 (20)
4.09 (104)
3.15 (80)
1/4 NPT (G 1/4)
.33 (8.5)
.87 (22)
.33 (8.5)
.41 (13.5)
7/16-20 (M 12)
.79 (20)
.63 (16)
1.89 (48)
.51 (13)
3/8-24 (M 10)
2.40 (61)
2.40 (61)
1.18 (30)
2.36 (60)
.31 (8)
2.07 (52.5)
2.38 (60.5)
*
–
9
10
Piston Rod Material
D
Hand Chrome Plated Stainless Steel
R
Stainless Steel
Stroke Length
In Inches for Inch Cylinders
In (mm) for Metric Cylinders
Cylinder Options
Inch Cylinder
C
Metric Cylinder
M ISO G Ports, Metric Threads, Stroke in mm
9
Series 90000
Cylinder Version
1
3
012 N/A
032 ø 11/4"
016 ø 5/8" 16 mm 040 ø 11/2"
020 ø 3/4" 20 mm 050 ø 2"
025 ø 1"
25 mm 063 ø 21/2"
32 mm
40 mm
50 mm
63 mm
Maximum Stroke for 91000/N2 & 93000/N2 Single Acting Non-rotating Piston Rods
DC/91000/N2 spring return inch cylinder
Nominal Diameter
Maximum Stroke
3/8"
ø 5/8"
ø 3/4", 1", 11/4", 11/2", 2", 21/2"
2"
DC/93000/N2 spring extend inch cylinder
ACT-8-18
DM/91000/N2 spring return metric cylinder
Diameter
ø 16 mm
ø 20, 25, 32, 40, 50, 63 mm
DM/93000/N2 spring extend metric cylinder
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Maximum Stroke
10 mm
50 mm
D C
1
–
2
9 1 0 5 0
3
4
5
6
N 2
–
7
8
–
2 5
9
10
Piston Rod Material
D
Chrome Plated Stainless
R
Stainless Steel
Stroke Length
In Inches for Inch Cylinder
In (mm) for Metric Cylinder
Inch Cylinder
C
Metric Cylinder
M ISO (Imperial) Metric Ports, Metric Threads, Stroke in mm
9
Cylinder Options
M Magnetic Piston
Series 90000
012 ø 1/2" 12 mm 032 ø 11/4"
016 ø 5/8" 16 mm 040 ø 11/2"
020 ø 3/4" 20 mm 050 ø 2"
025 ø 1"
25 mm 063 ø 21/2"
Cylinder Version
1
3
32 mm
40 mm
50 mm
63 mm
NOTE: Ø12 not available in /N2/
EXAMPLE: Stainless steel – metric threads – Series 90000 – single acting – spring return – 50 mm diameter –
internal non-rotating piston rod with magnetic piston – 25 mm stroke length.
Spares Kits
2
9
2
11
DC/91000/M, DM/91000/M, DC/93000/M, DM/93000/M
9
11
RC/91000/N2, RM/91000/N2, RC/93000/N2, RM/93000/N2
Model
Spares kits ø 2" & 21/2" (ø 50 & 63 mm)
DC/91050/M, DM/91050/M, DC/93050/M, DM/93050/M
RC/91050/N2, RM/91050/N2, RC/93050/N2, RM/93050/N2
DC/91063/M, DM/91063/M, DC/93063/M, DM/93063/M
RC/91063/N2, RM/91063/N2, RC/93063/N2, RM/93063/N2
QM/92050/00
QM/92050/N2/00
QM/92063/00
QM/92063/N2/00
Comprising
Item
2
9
11
Description
Piston rod seal
Piston seal
Wear ring
Grease
Quantity
1
1
1
1
Note: Please specify the cylinder number when ordering spare parts. Spares are not available for ∅ 1/2" to 1-1/2" (∅ 12 to 40 mm) models.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-8-19
Magnetically Operated Switches
Reed Switches M/40, M/40/C, TM/40, M/40/P
● Compact, low profile reed switches
● M/40, M/40/P, and TM/40 feature LED indicators
● Simple, reliable switching for fast response times
● TM/40 high temperature model
● M/40/P features a plug-in cable connection
Specifications
Form:
M/40 M/40/P – Normally open with LED
M/40/C – Normally open/normally closed
TM/40 – Normally open
Switching Voltage:
M/40, TM/40 – 240 VAC or 170 VDC maximum
M/40/C – 10 - 110 VAC or 10 - 175 VDC maximum
M/40/P – 60 VAC and 75 VDC maximum
Switching Current:
M/40, M/40/P – 180 mA (temperature dependent), see
ACT-8-21.
M/40/C – 250 mA
TM/40 – 180 mA
Contact Rating:
M/40, TM/40, M/40/P – 10 VA
M/40/C – 5 VA
Response Time:
M/40, M/40/C, M/40/P – 1.8 ms
TM/40 – 1.0 ms
-4° to 176°F (-20° to 80°C)
TM/40 – 32° to 302°F (0° to 150°C)
Protection Rating:
I.P.66
Vibration Resistance:
M/40, TM/40, M/40/P – 10 to 2000Hz 0.08 lbs. (35g)
(Resonant Frequency = 3 kHz)
M/40/C – 10 to 2000Hz 0.07 lbs. (30g)
Cable Length:
M/40 – 6.5' (2m),16.25' (5m) of P.V.C. covered two core cable
M/40/C – 6.5' (2m) of P.V.C. covered three core cable
TM/40 – 6.5' (2m) of silicon rubber covered two core cable
M/40/P – 16.25' (5m) of P.V.C. or Polyurethane covered three
core cable with plug-in connection
Materials
M/40, M/40/C, M/40/P – Nylon 66 body
TM/40 – 30% Glass filled Nylon 66 body
Brown
M/40, M/40/P
Black
Black (N.C.)
Blue
●
Brown (N.O.)
●
●
●
●
●
Brown
TM/40
Blue
Alternative Models
M/41 Solid state model with hardwired
cable – see ACT-8-22
M/42/P Solid state model with plug-in cable
– see page ACT-8-22
NOTE: When used to switch inductive loads such as solenoids, relays etc., arcing
can occur across the switch contacts depending on the current and voltage involved.
This arcing can be eliminated on d.c. loads by connecting a suitably rated diode
across the load or switch.
On a.c. loads, arcing is more difficult to eliminate, but the contact life can be greatly
extended by reducing the peak voltages by connecting a suitable non-linear
resistor (V.D.R.) across the load or switch.
ACT-8-20
Brookville, OH USA
M/40/C
Phone 937-833-4033
www.norgren.com
General Information
Model
M/40
M/40/C
TM/40
M/40/P
Switch type
LED, Normally open, hardwired
Normally open/Normally closed - changeover, hardwired
Normally open, high temperature, hardwired
Normally open with LED, plug-in cable
Cable length
6.5' (2), 16.25' (5)
6.5' (2)
6.5' (2)
16.25' (5)
NOTE: Switches are ordered separately.
220
200
180
Switching current mA
Effect of High Temperatures –
M/40 and M/40/P with LED
When using a Reed Switch that incorporates an LED,
the maximum switching current should be reduced
in direct proportion to the rise in temperature above
77°F (25°C).
At maximum temperature of 158°F (70°C) the
maximum switching current must be derated to 80mA.
160
140
120
100
80
60
40
20
M/40, M/40/C, TM/40 Magnetically Operated
Switches, with hardwired cable
1.02 (26)
Fahrenheit 32°
50°
68° 77° 86°
104°
122°
140°
158°
176°
194°
Centigrade 1°
10°
20°
30°
40°
50°
60°
70°
80°
90°
0.31
(8)
80 (2032)
0.28
(7)
0.39
0.63
(10)
(16)
0.16
(4)
M/40/P Magnetically Operated Switches,
with plug-in cable*
Switches are mounted in the integral slot
of the extruded tube.
Polarity:
Brown +
Blue –
Polarity is important on the M/40.
Normally open/normally closed:
Brown common
Black normally closed
Blue normally open
Polarity:
Brown +
Black –
Polarity is important.
0.31
(8)
1.00 (25.5)
0.28
(7)
0.63 0.39
(16) (10)
0.16
(4)
*Cable must be ordered separately.
Brookville, OH USA
Cable No.
M/P34595/5
M/P34596/5
M/P34614/5
M/P34615/5
Phone 937-833-4033
Connector type
Straight
Angled 90°
Straight
Angled 90°
Outer cover
Polyurethane
Polyurethane
P.V.C.
P.V.C.
www.norgren.com
ACT-8-21
Solid State Switches M/41, M/42, M/42/P
● Compact, low profile solid state switches
● LED indicator is standard
● Simple, reliable switching with fast response times
● Particularly suited for use where high levels of
vibration are present
● M/42/P features a plug-in cable connection
● CE – Marking
Specifications
Form:
M/41 – Solid state with LED (NPN, sinking,
grounded emitter output)
M/42, M/42/P – Solid state with LED (PNP, sourcing,
open collector output)
Switching Voltage:
10V to 30 VDC only
M/42/P – 10V to 30 VDC only
Switching Current:
M/41, M/42, M/42/P – 200 mA
Response Time:
0.5 ms
-4° to 158°F (-20° to 70°C)
Protection Rating:
I.P.66
Cable Length:
M/41, M/42 – 6.5' (2m) of P.V.C. covered three core cable
M/42/P – 16.25' (5m) of P.V.C. or Polyurethane covered
three core cable with plug-in connection
Switch Protection:
Diode protection must be used with inductive loads
Materials
Nylon 66 body
ACT-8-22
Brookville, OH USA
Brown
M/41
Black
Blue
Brown +
M/42, M/42/P
Black
Blue –
Alternative Models
M/40
Hardwired cable model –
see ACT-8-20
M/40/C Normally open/normally closed
model with integral cable –
see ACT-8-20
M/40/P Plug-in cable model – see ACT-8-20
TM/40 High temperature model –
see ACT-8-20
Phone 937-833-4033
www.norgren.com
General Information
Model
M/41
M/42
M/42/P
Switch type
Cable length
Solid State with LED, sinking, NPN, hardwired cable
Solid State with LED, sourcing, PNP, hardwired cable
Solid State with LED, sourcing, PNP, plug-in cable
6.5' (2)
6.5' (2)
16.25' (5)
M/41, M/42 Magnetically Operated
1.02 (26)
Polarity:
Brown +
Blue –
Black Output
0.31
(8)
80 (2032)
0.28
(7)
0.39
0.63
(10)
(16)
0.16
(4)
with plug-in cable*
Polarity:
Brown +
Blue –
Black Output
0.31
(8)
1.00 (25.5)
0.28
(7)
0.39
0.60
(10)
(15)
0.16
(4)
Cable No.
M/P34595/5
M/P34596/5
M/P34614/5
M/P34615/5
Brookville, OH USA
Phone 937-833-4033
Connector type
Straight
Angled 90°
Straight
Angled 90°
www.norgren.com
Outer cover
Polyurethane
Polyurethane
P.V.C.
P.V.C.
ACT-8-23
Section 9
Norgren Compact
Interchangeable Pneumatic
Actuator
Single Acting Actuator ..............................................................ACT-9-1
Double Acting Actuator .............................................................ACT-9-8
Single Acting Compact
Interchangeable Pneumatic Actuator
Brookville, OH USA
Double Acting Compact
Interchangeable Pneumatic Actuator
Phone 937-833-4033
www.norgren.com
ACT-9-1
Light weight
Compact design, which is considerably shorter than
ISO/VDMA or NFPA equivalent.
Low friction characteristics for high speed operation
Hard anodized body for corrosion protection and longer
life
Duralon® rod bearing for reduced wear
Chrome plated stainless steel piston rods
Technical data
Medium:
Operation:
DM/95000 BSP parallel ports, single acting, non-cushioned, metric
ports, spring return
DM/96000 BSP parallel ports, single acting, non-cushioned, metric
ports, spring extend
DC/95000 NPT ports, single acting, non-cushioned, metric ports,
spring return
DC/96000 NPT ports, single acting, non-cushioned, metric ports,
spring extend
Operating pressure:
14,5 to 145 psig (1 to 10 bar)
-25°F to +250°F (-32°C to +121°C)
To order a basic 25 mm bore cylinder, spring
return, with a 10 mm stroke, female thread,
BSP parallel ports, metric thread, quote:
DM/95025/X/10.
To order a basic 40 mm bore cylinder, spring
extend, with a 5 mm stroke, female thread,
NPT ports, inch thread, quote: DC/96040/X/5.
Mountings are included. See Options selector
table on page ACT-9-8.
Consult our Technical Service for use below 35°F (+2°C)
Accessories
Piston rod clevis mounting
Piston rod eye mounting
Spring return
Spring extend
Cylinder diameters:
12, 16, 20, 25, 32, 40, 50 mm
Strokes:
5 mm
Ø 12 to 40 mm
10 mm
Ø 12 to 50 mm
20 mm
Ø 50 mm
See table on page N 1.4.099.02
Non-standard strokes available on request
Materials
Barrel: hard anodized aluminum
End caps: hard anodized aluminum alloy
Piston rod: stainless steel, hard chrome plated
Elastomers: Buna N
ACT-9-2
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
see page
ACT-9-8
ACT-9-8
Cylinder variants
Symbol
Model
Description
D*/95000/X
D*/95000
TD*/95000
D*/96000/X
D*/96000
TD*/96000
Standard cylinders, single acting, spring return, female rod thread, rod end
Standard cylinders, single acting, spring return, male rod thread, rod end
Heat resistant (Viton®) seals, +400°F (+204°C) max., metric ports
Standard cylinders, single acting, spring extend, female rod thread, rod end
Standard cylinders, single acting, spring extend, male rod thread, rod end
Heat resistant ( Viton®) seals, +400°F (+204°C max., metric ports
˙D˙/9˙0˙˙/˙/˙/˙
Options selector
Temperature
High temperature (Viton® seals)
Mounting
Without
Foot
Flange rod end
Flange cap end
ISO Flange rod end
ISO Flange cap end
Rear clevis
Tapped holes - both ends
Substitute
T
Ports
Substitute
NPT Ports (inch threads, stroke in mm)
C
BSP parallel (metric ports and threads, stroke in mm) M
Operation
Spring return
Spring extend
Substitute
5
6
Cylinder diameters (mm)
12
16
20
25
32
40
50
Substitute
012
016
020
025
032
040
050
Substitute
None
C
G
B
IG
IB
D
A
Stroke (mm)
10 mm max. (Ø 12 to 40 mm)
20 mm max. (Ø 50 mm)
Variants (non-magnetic piston)
Standard, female rod thread, rod end
Male rod thread, rod end
Substitute
X
None
For combinations of alternative cylinders consult our Technical Service.
Strokes (mm)
Ø
12
16
20
25
32
40
50
5
¬
¬
¬
¬
¬
¬
–
10
¬
¬
¬
¬
¬
¬
¬
20
–
–
–
–
–
–
¬
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-9-3
Theoretical forces • Air consumption
Ø
D*/96000
D*/95000
Theoretical forces lb (N) at 87 psi (6 bar) Theoretical forces lb (N) at 87 psi (6 bar)
Outstroke
F1
Instroke
F1
Air consumption in3/in. stroke (l/cm stroke)
at 87 psi (6 bar)
Outstroke
Instroke
12
16
20
25
32
40
50
11.7
23.7
39.1
61.5
103.5
162.9
252.4
1.24
2.17
3.41
5.43
8.68
13.64
21.39
(52)
(105)
(174)
(274)
(460)
(725)
(1123)
1.58
2.81
3.26
4.50
7.20
9.90
12.71
(7)
(12.5)
(14.5)
(20)
(32)
(44)
(56.5)
8.9
15.4
26.0
44.7
75.2
136.1
204.0
(40)
(61)
(116)
(199)
(335)
(605)
(907)
1.58
2.81
3.26
4.50
7.20
9.90
12.71
(7)
(12.5)
(14.5)
(20)
(32)
(44)
(56.5)
(0.008)
(0.014)
(0.022)
(0.035)
(0.056)
(0.088)
(0.138)
0.93
1.71
2.64
4.19
6.51
11.47
17.98
(0.006)
(0.011)
(0.017)
(0.027)
(0.042)
(0.074)
(0.116)
F1 = Return force of spring lb (N)
Cylinder weights
Ø
12
16
20
25
32
40
50
Stroke (mm)
5
0.19 (0.09)
0.24 (0.11)
0.30 (0.14)
0.44 (0.20)
0.73 (0.33)
1.10 (0.50)
–
(–)
10
0.23
0.28
0.34
0.51
0.84
1.23
1.46
(0.11)
(0.13)
(0.16)
(0.23)
(0.38)
(0.56)
(0.66)
20
–
–
–
–
–
–
1.82
Additional weight
for male thread
(–)
(–)
(–)
(–)
(–)
(–)
(0.82)
0.004
0.007
0.015
0.04
0.09
0.09
0.18
(0.002)
(0.003)
(0.007)
(0.017)
(0.040)
(0.040)
(0.080)
Weights in lb (kg)
Please note: estimated weights for single rod models
ACT-9-4
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Basic dimensions –D*/95000/X, D*/96000/X
Ø 12 ... 16 mm
2
Q
E
Q
H
øD
Y ø 20 = 55°
Y ø 25 = 45°
E1
)
0.
0)
(1
K
Y ø 12 = 65°
Y ø 16 = 55°
E
øI
E1
(3
Y
N
N
Section Z
X
12
E1
øD
E1
X
O
Y
Z
5
39
0.
øI
K
Q
45°
M
Z
O
45°
Section X
B + stroke
L
M
2
P
Q
Ø 12 ... 25 mm
A + stroke
B + stroke
P
E
Ø 20 ... 25 mm
A + stroke
L
30
°
Ø 32 ... 50 mm
Cylinder with rod end male thread
D*/95000, D*/96000
Section X
E1
A + stroke
M
H
B + stroke
L
Z
P
Ø 12 ... 50 mm
Q
Q
øI
Section Z
N
O
Ø
12
16
20
25
32
40
50
Stroke range
5 ... 10
5 ... 10
5 ... 10
5 ... 10
5. 10
5 ... 10
10 ... 20
A
0.81
0.87
0.94
1.08
1.18
1.44
1.52
Ø
12
16
20
25
32
40
50
Stroke range
5 ... 10
5 ... 10
5 ... 10
5 ... 10
5. 10
5 ... 10
10 ... 20
H
#8-32 x 0.21
#8-32 x 0.21
#10-32 x 0.28
1/4-28 x 0.39
5/16-24 x 0.50
3/8-24 x 0.50
1/2-20 x 0.50
(20.5)
(22.0)
(24.0)
(27.5)
(30.0)
(36.5)
(38.5)
Ø Stroke range
ØO
12 5 ... 10
0.26 x 0.14
16 5 ... 10
0.26 x 0.14
20 5 ... 10
0.35 x 0.28
25 5 ... 10
0.35 x 0.28
32 5. 10
0.35 x 0.28
40 5 ... 10
0.35 x 0.28
50 10 ... 20
0.43 x 0.31
Dimensions in inches (mm)
AF
0.34
0.34
0.38
0.43
0.50
0.56
0.75
(8)
(10)
(13)
(17)
(22)
(22)
(27)
(M3 x 0.5-5 deep)
(M4 x 0.7-5 deep)
(M5 x 0.8-7 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M8 x 1.25-12 deep)
(M10 x 1.5-12 deep)
(6.5 x 3.5 deep)
(6.5 x 3.5 deep)
(9.0 x 7.0 deep)
(9.0 x 7.0 deep)
(9.0 x 7.0 deep)
(9.0 x 7.0 deep)
(11.0 x 8.0 deep)
B
0.67
0.73
0.77
0.86
0.91
1.16
1.20
(17.0)
(18.5)
(19.5)
(22.5)
(23.0)
(29.5)
(30.5)
HM
#8-32 x 0.31
#8-32 x 0.31
#10-32 x 0.31
1/4-28 x 0.37
5/16-24 x 0.50
3/8-24 x 0.63
1/2-20 x 0.77
P
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
1/8
1/4
Q
0.28
0.31
0.32
0.33
0.34
0.36
0.41
ØD
0.236
0.315
0.394
0.472
0.630
0.630
0.787
(6)
(8)
(10)
(12)
(16)
(16)
(20)
Brookville, OH USA
HM
0.395 (10)
…E
1.09
1.25
–
–
–
–
–
(M5 x 0.8-9 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M10 x 1.25-15 deep)
(M14 x 1.5-20.5 deep)
(M14 x 1.5-20.5 deep)
(M18 x 1.5-26 deep)
(7.0)
(7.8)
(8.1)
(8.4)
(8.7)
(9.2)
(10.5)
LM
AF
°
X
30
Z
0.475 (12.1) – Ø 40...100
0.455 (11.6) – Ø 32
øD
K
M
W
E1
0.180 (4.6) – Ø 80
0.098 (2.9) – Ø 40
0.12 (3)
W
–
–
–
–
1.94
2.24
2.78
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
ØI
1.24
1.46
1.85
2.02
2.32
2.72
3.34
(–)
(–)
(–)
(–)
(49.3)
(57.0)
(70.6)
(31.5)
(37.1)
(47)
(51.3)
(58.9)
(69)
(84.9)
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
(25)
(29)
(36)
(40)
(44.5)
(52)
(63.7)
K
0.20
0.24
0.31
0.39
0.55
0.55
0.67
(5)
(6)
(8)
(10)
(14)
(14)
(17)
Z
–
–
–
–
0.84
0.84
1.04
(–)
(–)
(–)
(–)
(21.4)
(21.4)
(26.5)
Phone 937-833-4033
L
0.14
0.14
0.18
0.20
0.28
0.28
0.31
E2
0.90
1.07
1.23
1.45
–
–
–
(23)
(27.2)
(31.2)
(36.9)
(–)
(–)
(–)
(3.5)
(3.5)
(4.5)
(5)
(7)
(7)
(8)
LM
0.45
0.45
0.49
0.57
0.78
0.91
1.08
lb (kg) at 0 mm
0.15
(0.07)
0.20
(0.09)
0.26
(0.12)
0.37
(0.17)
0.62
(0.28)
0.97
(0.44)
1.10
(0.50)
(14)
(15.5)
(18.5)
(22.5)
(28.5)
(28.5)
(33.5)
M
0.87
1.10
1.42
1.57
1.34
1.57
1.97
(22)
(28)
(36)
(40)
(34)
(40)
(50)
ØN
0.14
0.14
0.22
0.22
0.22
0.22
0.26
(3.5)
(3.5)
(5.5)
(5.5)
(5.5)
(5.5)
(6.6)
lb (kg) per 5 mm
0.04 (0.02)
0.04 (0.02)
0.04 (0.02)
0.07 (0.03)
0.11 (0.05)
0.13 (0.06)
0.18 (0.08)
www.norgren.com
ACT-9-5
Mountings
Tapped hole mounting both ends – A
R
O
Ø
12
16
16
25
32
40
50
O
#8-32
#8-32
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
R
0.43
0.43
0.67
0.67
0.67
0.75
0.75
(M4 x 0.7)
(M4 x 0.7)
(M6 x 1.0)
(M6 x 1.0)
(M6 x 1.0)
(M6 x 1.0)
(M8 x 1.25)
(11)
(11)
(17)
(17)
(17)
(19)
(19)
Note: Inch threads for 'C' port code.
Metric threads for 'M' port codes.
Metric for foot, flange, or clevis mount.
Rear clevis mounting – D
Ø 12 ... 25 mm
Ø 32 ... 50 mm
LT
LT
LG
CN
CX
CN
CZ
CU
CW
E1
E1
LG
E1
RR
CW
E
Ø
12
16
20
25
32
40
50
CN
0.187
0.187
0.312
0.375
0.375
0.375
0.5
(5)
(5)
(8)
(10)
(10)
(10)
(14)
CW
0.55
0.59
0.71
0.79
0.79
0.87
1.1
(14)
(15)
(18)
(20)
(20)
(22)
(28)
CU
0.28
0.39
0.47
0.55
0.55
0.55
0.79
CX
CU
(7)
(10)
(12)
(14)
(14)
(14)
(20)
CX
0.21
0.27
0.33
0.41
0.72
0.72
0.88
(5.3)
(6.8)
(8.3)
(10.3)
(18.3)
(18.3)
(22.3)
CZ
0.39
0.47
0.63
0.79
1.42
1.42
1.73
(10)
(12)
(16)
(20)
(36)
(36)
(44)
LT
0.2
0.2
0.2
0.2
0.24
0.31
0.31
(5)
(5)
(5)
(5)
(6)
(8)
(8)
CZ
E1
RR
LG
0.11
0.11
0.16
0.16
0.16
0.16
0.2
(2.8)
(2.8)
(4.0)
(4.0)
(4.0)
(4.0)
(5.0)
RR
0.24
0.24
0.35
0.39
0.39
0.39
0.55
(6.0)
(6.0)
(9.0)
(10)
(10)
(10)
(14)
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
(25)
(29)
(36)
(40)
(44.5)
(52)
(63.7)
…E
1.09
1.25
–
–
–
–
–
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
For basic cylinder dimensions, see page N 1.4.099.04
ACT-9-6
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
lb (kg)
0.05 (0.02)
0.05 (0.02)
0.10 (0.05)
0.15 (0.07)
0.20 (0.09)
0.29 (0.13)
0.46 (0.22)
Foot mounting – C
Ø 12 ... 25 mm
Ø 32 ... 50 mm
LG
LD
L
Y
X
LD
LX
LD
0.18
0.18
0.26
0.26
0.26
0.26
0.35
LH
0.67
0.75
0.94
1.02
1.18
1.30
1.54
(4.5)
(4.5)
(6.5)
(6.5)
(6.5)
(6.5)
(9)
L
Y
X
LX
LZ
Ø
12
16
20
25
32
40
50
LT
LH
LT
LH
LY
LY
LG
LZ
(17)
(19)
(24)
(26)
(30)
(33)
(39)
LX
1.39
1.50
1.89
2.05
2.24
2.52
3.11
(34)
(38)
(48)
(52)
(57)
(64)
(79)
LY
1.16
1.32
1.65
1.81
2.24
2.52
3.07
(29.5)
(33.5)
(42)
(46)
(57)
(64)
(78)
LZ
1.73
1.89
2.44
2.60
2.80
3.07
3.74
L
0.53
0.53
0.57
0.59
0.67
0.67
0.71
(44)
(48)
(62)
(66)
(71)
(78)
(95)
(13.5)
(13.5)
(14.5)
(15)
(17)
(17)
(18)
LT
0.08
0.08
0.13
0.13
0.13
0.13
0.13
(2)
(2)
(3.2)
(3.2)
(3.2)
(3.2)
(3.2)
X
0.31
0.31
0.36
0.42
0.44
0.44
0.58
Y
0.18
0.20
0.23
0.23
0.23
0.28
0.31
(8)
(8)
(9.2)
(10.7)
(11.2)
(11.2)
(14.7)
(4.5)
(5)
(5.8)
(5.8)
(5.8)
(7)
(8)
LG
0.11
0.11
0.16
0.16
0.16
0.16
0.20
lb (kg)
0.04 (0.02)
0.04 (0.02)
0.04 (0.02)
0.09 (0.04)
0.09 (0.04)
0.22 (0.10)
0.24 (0.11)
(2.8)
(2.8)
(4)
(4)
(4)
(4)
(5)
Flange rod end mounting – G
Flange cap end mounting – B
ISO Flange rod end mounting – IG
ISO Flange cap end mounting – IB
L FT
FX
FY
FV
FV
Ø 32 ... 50 mm
FD
Ø 12 ... 25 mm
FT
FD
FZ
FT
L FT
FX
FZ
ISO
Ø
12
16
20
25
32
40
50
Non-ISO
FT
0.22
0.22
0.31
0.31
0.31
0.31
0.35
(5.5)
(5.5)
(8)
(8)
(8)
(8)
(9)
L
0.31
0.31
0.26
0.28
0.35
0.35
0.35
(8.0)
(8.0)
(6.5)
(7.0)
(9.0)
(9.0)
(9.0)
FD
0.22
0.22
0.26
0.26
0.28
0.35
0.35
(5.5)
(5.5)
(6.6)
(6.6)
(7)
(9)
(9)
FY
–
–
–
–
1.26
1.42
1.77
(–)
(–)
(–)
(–)
(32)
(36)
(45)
FX
1.57
1.57
1.97
1.97
2.52
2.83
3.54
(40)
(40)
(50)
(50)
(64)
(72)
(90)
FV
0.98
1.18
1.54
1.65
1.89
2.13
2.64
(25)
(30)
(39)
(42)
(48)
(54)
(67)
FZ
1.97
1.97
2.44
2.44
2.99
3.47
4.17
(50)
(50)
(62)
(62)
(76)
(88)
(106)
FD
0.18
0.18
0.26
0.26
0.22
0.22
0.26
(4.5)
(4.5)
(6.5)
(6.5)
(5.5)
(5.5)
(6.5)
FY
–
–
–
–
1.34
1.57
1.97
(–)
(–)
(–)
(–)
(34)
(40)
(50)
FX
1.77
1.77
1.89
2.05
2.2
2.44
2.99
(45)
(45)
(48)
(52)
(56)
(62)
(76)
FV
0.98
1.18
1.54
1.65
1.89
2.13
2.64
(25)
(30)
(39)
(42)
(48)
(54)
(67)
FZ
2.17
2.17
2.36
2.52
2.56
2.83
3.5
(55)
(55)
(60)
(64)
(65)
(72)
(89)
lb (kg)
0.04
0.04
0.04
0.09
0.13
0.33
0.37
(0.02)
(0.02)
(0.02)
(0.04)
(0.06)
(0.15)
(0.16)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-9-7
Accessories
Piston rod clevis
Ø 12 ... 25 mm
Ø 32 ... 50 mm
P
Z
A
Z
A
P
L
X
L
U
U
X
CN
Ø
12
16
20
25
32
40
50
Model
Inch
QC/99012/25
QC/99016/25
QC/99020/25
QC/99025/25
QC/99032/25
QC/99040/25
QC/99050/25
M
M
E
CN
CN
Metric
QM/99012/25
QM/99016/25
QM/99020/25
QM/99025/25
QM/99032/25
QM/99032/25
QM/99050/25
M
0.187
0.187
0.312
0.375
0.375
0.375
0.500
(5)
(5)
(8)
(10)
(10)
(10)
(14)
L
#8-32
#8-32
#10-32
1/4-28
5/16-24
3/8-24
1/2-20
(M5 x 0.8 deep)
(M6 x 1.0 deep)
(M8 x 1.25 deep)
(M10 x 1.25 deep)
(M14 x 1.5 deep)
(M14 x 1.5 deep)
(M18 x 1.5 deep)
0.63
0.83
0.98
1.18
1.18
1.18
1.57
U
(16)
(21)
(25)
(30)
(30)
(30)
(40)
0.27
0.39
0.45
0.55
0.55
0.55
0.79
X
(7)
(10)
(11.5)
(14)
(14)
(14)
(20)
0.21
0.26
0.33
0.41
0.72
0.72
0.88
Z
(5.3)
(6.6)
(8.3)
(10.3)
(18.4)
(18.4)
(22.4)
P
0.39
0.47
0.63
0.78
1.44
1.44
1.75
(10)
(12)
(16)
(20)
(36.6)
(36.6)
(44.5)
0.55
0.63
0.83
0.98
1.61
1.61
1.97
E
(14)
(16)
(21)
(25)
(41)
(41)
(50)
0.39
0.47
0.63
0.78
0.87
0.87
1.10
A
(10)
(12)
(16)
(20)
(22)
(22)
(28)
0.85
1.10
1.34
1.61
1.65
1.65
2.20
lb (kg)
(21.5)
(28 )
(34)
(41)
(42)
(42)
(56)
0.02
0.02
0.02
0.02
0.04
0.04
0.09
(0.01)
(0.01)
(0.01)
(0.01)
(0.02)
(0.02)
(0.04)
Ordering information To order a basic 25 mm bore cylinder, spring return, with a 10 mm stroke, BSP parallel ports
quote: DM/95025/10 plus piston rod clevis mounting: QM/99025/25
Piston rod eye
Ø 12 ... 25 mm
Ø 32 ... 50 mm
L
X
L
Z
A
Z
A
U
U
X
CN
M
M
CN
Ø
12
16
20
25
32
40
50
Model
Inch
QC/99012/32
QC/99016/32
QC/99020/32
QC/99025/32
QC/99032/32
QC/99040/32
QC/99050/32
CN
Metric
QM/99012/32
QM/99016/32
QM/99020/32
QM/99025/32
QM/99032/32
QM/99032/32
QM/99050/32
0.187
0.187
0.312
0.375
0.375
0.375
0.500
M
(5)
(5)
(8)
(10)
(10)
(10)
(14)
#8-32
#8-32
#10-32
1/4-28
5/16-24
3/8-24
1/2-20
L
(M5 x 0.8 deep)
(M6 x 1.0 deep)
(M8 x 1.25 deep)
(M10 x 1.25 deep)
(M14 x 1.5 deep)
(M14 x 1.5 deep)
(M18 x 1.5 deep)
0.63
0.98
0.98
1.18
1.18
1.18
1.57
U
(16)
(25)
(25)
(30)
(30)
(30)
(40)
0.27
0.55
0.45
0.55
0.55
0.55
0.79
X
(7)
(14)
(11.5)
(14)
(14)
(14)
(20)
0.18
0.24
0.3
0.38
0.69
0.69
0.85
Z
(4.7)
(6.2)
(7.7)
(9.7)
(17.5)
(17.5)
(21.5)
0.38
0.44
0.63
0.75
0.87
0.87
1.06
A
(9.7)
(11.2)
(16)
(19)
(22)
(22)
(27)
0.85
1.26
1.34
1.61
1.65
1.65
2.2
lb (kg)
(21)
(32)
(34)
(41)
(42)
(42)
(56)
0.05
0.05
0.10
0.15
0.20
0.29
0.73
(0.02)
(0.02)
(0.05)
(0.07)
(0.09)
(0.13)
(0.33)
Ordering information To order a basic 25 mm bore cylinder, spring return, with a 10 mm stroke, BSP parallel ports,
quote: DM/95025/10 plus piston rod eye mounting: QM/99025/32
Spares
Cylinder
D*/95012, D*/96012
D*/95016, D*/96016
D*/95020, D*/96020
D*/95025, D*/96025
D*/95032, D*/96032
D*/95040, D*/96040
D*/95050, D*/96050
ACT-9-8
Spares kit
QM/99012/00
QM/99016/00
QM/99020/00
QM/99025/00
QM/99032/00
QM/99040/00
QM/99050/00
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Light weight
Compact design, which is considerably shorter than
ISO/VDMA or NFPA equivalent.
Low friction characteristics for high speed operation
Duralon® rod bearing for reduced wear
Chrome plated stainless steel piston rods
Technical data
To order a basic 25 mm bore cylinder with a
magnetic piston and 10 mm stroke, female rod
thread, BSP parallel ports, quote:
DM/99025/MX/10.
To order a basic 40 mm bore cylinder with a
magnetic piston and 5 mm stroke, female rod
thread, NPT ports, quote: DC/99040/MX/5.
Mountings are included for cylinders up to
Ø 100 mm. See Model codes table on page
ACT-9-9.
Magnetically operated switches need to be
ordered separately.
Medium:
Operation:
DM/99000 BSP parallel ports, double acting, non-cushioned,
metric threads
DC/99000 NPT ports, double acting, non-cushioned, inch threads
Operating pressure:
14.5 to 145 psig (1 to 10 bar)
-25°F to +250°F (-32°C to +121°C)
Accessories
Switches See page ACT-9-10.
Consult our Technical Service for use below 35°F (+2°C)
Cylinder diameters:
12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125, 140, 160 mm
Strokes:
See table on page ACT-9-9
Non-standard strokes available on request
Materials
Non-magnetic
Barrel: hard anodized aluminum
End caps: hard anodized aluminum alloy
Piston rod: stainless steel, hard chrome plated
Elastomers: Buna N
Magnetic
Alternative cylinders
See page ACT-9-9.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-9-9
Cylinder variants
Symbol
Model
Non-magnetic piston
Symbol
Model
Magnetic piston
Description
Catalogue
page
D*/99000/X
D*/99000/
D*/99000/EX
D*/99000/FX
TD*/99000/X
D*/99000/JX
D*/99000/J
D*/99000/MX
D*/99000/M
D*/99000/MEX
D*/99000/MFX
TD*/99000/MX
D*/99000/JMX
D*/99000/JM
Standard female thread
Male rod thread, single rod
Boss, rod end female thread
Boss, cap end female thread
High temperature (Viton seals)
Double ended piston rod, female thread
Double ended piston rod, male thread
ACT-9-11/12
ACT-9-11/12
ACT-9-22
ACT-9-22
ACT-9-11
ACT-9-13/14
ACT-9-13/14
D*/99000/N1X
D*/99000/N2X
Non-rotating piston rod, female thread (Ø 12 to 100 mm)
ACT-9-15/16
D*/99000/N3
D*/99000/N4
Cylinder with guided toolplate
ACT-9-19
D*/99000/N5X
D*/99000/N6X
Non-rotating double ended piston rod, female thread
ACT-9-17/18
D*/99000/BX
D*/99000/BMX
Cylinder with bumpers both ends, female thread (standard on Ø 125, 140 & 160)
ACT-9-11/12
D*/99000/SX
D*/99000/MSX
Adjustable stroke, single rod, female thread
On request
˙D˙/9 9˙˙˙/˙/˙/˙
Options selector
Temperature
High temperature (Viton® seals)
Mounting
Without
Foot
Flange rod end
Flange cap end
ISO Flange rod end
ISO Flange cap end
Rear clevis
Tapped holes - both ends
Substitute
T
Ports
Substitute
NPT Ports (inch threads, stroke in mm)
C
BSP parallel ports (metric ports & threads, stroke in mm) M
Cylinder diameters (mm)
12
16
20
25
32
40
50
63
80
100
125
140
160
Substitute
012
016
020
025
032
040
050
063
080
100
125
140
160
Stroke (mm)
300 max. (see table below)
Variants (non-magnetic piston)
Substitute
Standard, female rod thread
X
None
Double ended piston rod, female rod thread
JX
Double ended piston rod, male thread, both ends
J
Non-rotating piston rod, female rod thread
N1X
N3
Double ended piston rod, non-rotating, female rod thread
N5X
Boss, rod end, female rod thread
EX
Boss, cap end, female rod thread
FX
Bumpers on both ends, female rod thread (Ø 12 ... 100 mm) BX
Adjustable stroke, retract, single rod, female rod thread
SX
Strokes:
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
5
¬
¬
¬
¬
¬
¬
–
–
–
–
–
–
–
10
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
ACT-9-10
15
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
–
–
–
20
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
25
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
–
–
–
30
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
35
–
–
¬
¬
¬
¬
¬
¬
¬
¬
–
–
–
40
–
–
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
45
–
–
¬
¬
¬
¬
¬
¬
¬
¬
–
–
–
Substitute
None
C
G
B
IG
IB
D
A
50
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
75
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
100
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
125
–
–
–
–
¬
¬
¬
¬
¬
¬
¬
¬
¬
150
–
–
–
–
¬
¬
¬
¬
¬
¬
¬
¬
¬
Brookville, OH USA
175
–
–
–
–
–
–
–
–
–
–
¬
¬
¬
200
–
–
–
–
–
–
–
–
–
–
¬
¬
¬
250
–
–
–
–
–
–
–
–
–
–
¬
¬
¬
300
–
–
–
–
–
–
–
–
–
–
¬
¬
¬
Phone 937-833-4033
Variants (magnetic piston)
Substitute
Standard, female rod thread
MX
M
Double ended piston rod, male thread, both ends
JM
Double ended piston rod, female rod thread
JMX
Non-rotating piston rod, female rod thread
N2X
N4
Double ended piston rod, non-rotating, female rod thread
N6X
Boss, rod end, female rod thread
MEX
Boss, cap end, female rod thread
MFX
Bumpers on both ends, female rod thread (Ø 12 ... 100 mm) MBX
Adjustable stroke, retract, single rod, female rod thread
MSX
www.norgren.com
Theoretical forces • Air consumption
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
Theoretical forces lb (N) at 87 psi (6 bar)
Air consumption in3/in. stroke (l/cm stroke) at 87 psi (6 bar)
Outstroke
14.8
27.0
42.6
66.1
108.8
169.7
264.5
420.2
677.7
1058.8
1654.7
2075.8
2711.8
(50.3)
(89.0)
(143.2)
(228.2)
(363.9)
(634.8)
(990.6)
(1683.7)
(2720.5)
(4288.1)
(6749.3)
(8622.4)
(11307.8)
Outstroke
1.24
2.17
3.41
5.43
8.68
13.64
21.39
33.79
54.56
85.25
133.30
167.40
218.55
50
0.240
0.353
0.559
0.631
0.746
0.986
1.460
2.040
4.570
6.490
14.37
16.93
22.91
75
0.309
0.450
0.684
0.899
1.150
1.370
2.110
2.770
6.240
8.380
15.81
18.56
24.89
Instroke
11.3
20.1
32.2
51.3
81.8
142.7
222.7
378.5
611.6
964.0
1517.3
1938.4
2542.1
(65.8)
(120.1)
(189.5)
(294.0)
(484.0)
(754.9)
(1176.6)
(1869.1)
(3014.6)
(4709.8)
(7360.5)
(9233.6)
(12062.7)
Instroke
1.09
1.71
2.64
4.19
6.51
11.47
17.98
30.38
49.29
79.83
122.45
156.55
204.60
(0.008)
(0.014)
(0.022)
(0.035)
(0.056)
(0.088)
(0.138)
(0.218)
(0.35)
(0.55)
(0.86)
(1.08)
(1.41)
(0.007)
(0.011)
(0.017)
(0.027)
(0.042)
(0.074)
(0.116)
(0.196)
(0.32)
(0.52)
(0.79)
(1.01)
(1.32)
Cylinder weights
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
Stroke (mm)
5
0.088 (0.04)
0.135 (0.06)
0.201 (0.09)
0.260 (0.12)
0.346 (0.16)
0.600 (0.27)
–
(–)
–
(–)
–
(–)
–
(–)
–
(–)
–
(–)
–
(–)
10
0.104
0.159
0.247
0.306
0.397
0.648
0.884
1.430
3.180
4.870
12.08
14.31
19.75
(0.05)
(0.07)
(0.11)
(0.14)
(0.18)
(0.29)
(0.40)
(0.65)
(1.44)
(2.21)
(5.48)
(6.49)
(8.96)
30
0.165
0.256
0.426
0.494
0.595
0.842
1.210
1.780
3.980
5.800
13.23
15.61
21.32
(0.08)
(0.12)
(0.19)
(0.22)
(0.27)
(0.38)
(0.55)
(0.81)
(1.80)
(2.63)
(6.00)
(7.08)
(9.67)
(0.11)
(0.16)
(0.25)
(0.29)
(0.34)
(0.45)
(0.66)
(0.93)
(2.08)
(2.95)
(6.52)
(7.68)
(10.39)
100
(0.14) 0.378
(0.20) 0.546
(0.31) 0.826
(0.41) 1.070
(0.52) 1.400
(0.62) 1.620
(0.96) 2.430
(1.26) 3.230
(2.83) 7.270
(3.80) 9.520
(7.17) 17.22
(8.42) 20.22
(11.29) 26.87
125
–
–
–
–
1.810
2.370
4.070
4.940
7.700
11.100
18.65
21.85
28.86
(0.17)
(0.25)
(0.38)
(0.48)
(0.64)
(0.73)
(1.10)
(1.46)
(3.30)
(4.32)
(7.81)
(9.17)
(12.19)
(–)
(–)
(–)
(–)
(0.82)
(1.08)
(1.85)
(2.24)
(3.49)
(5.04)
(8.46)
(9.91)
(13.09)
150
–
–
–
–
2.060
2.670
4.550
5.510
8.520
12.180
20.08
23.50
30.84
Additional weight
for male thread
(–)
(–)
(–)
(–)
(0.94)
(1.21)
(2.07)
(2.50)
(3.87)
(5.53)
(9.11)
(10.66)
(13.99)
0.002
0.003
0.007
0.017
0.040
0.040
0.080
0.080
0.160
0.270
0.31
0.31
0.48
(0.004)
(0.007)
(0.015)
(0.040)
(0.090)
(0.090)
(0.180)
(0.180)
(0.350)
(0.600)
(0.680)
(0.680)
(1.060)
Additional weight
for magnetic piston
0.012
0.017
0.025
0.029
0.039
0.054
0.080
0.102
0.143
0.282
–
–
–
(0.03)
(0.04)
(0.05)
(0.06)
(0.09)
(0.12)
(0.18)
(0.24)
(0.31)
(0.62)
(–)
(–)
(–)
Weights in lb (kg)
Please note: estimated weights for single rod models
Switches
Female cordsets
Model
Reed
Solid state
Model
Reed
QM/348/RSU/2,75
QM/348/LSU/2,75
QM/348/EAP/2,75
QM/348/EAN/2,75
QM/348/RSU/CP
QM/348/LSU/CP
QM/348/EAP/CP
QM/348/EAN/CP
Model
Length
M/P73326/1
M/P73326/2
M/P73326/5
1m
2m
5m
Note: Quick disconnect styles are supplied with 6 inch pigtail
with male connector. Order female cordsets separately.
Voltage
V a.c.
V d.c.
Current
max.
Temperature
°F
°C
LED
Solid state
QM/348/EAP/2,75
QM/348/EAN/2,75
0 ... 120
5 ... 120
–
–
0 ... 120
5 ... 120
6 ... 24
6 ... 24
500 mA
30 mA
200 mA
200 mA
-4° ... +176°
-4° ... +176°
-4° ... +176°
-4° ... +176°
–
¬
¬
¬
QM/348/RSU/2,75
QM/348/LSU/2,75
(-20° ... +80°)
(-20° ... +80°)
(-20° ... +80°)
(-20° ... +80°)
Features
–
–
PNP
NPN
Cable/plug
length
Cable type
9 ft.
9 ft.
9 ft.
9 ft.
26-3 PVC
26-3 PVC
26-3 PVC
26-3 PVC
(2.75 m)
(2.75 m)
(2.75 m)
(2.75 m)
Full information on switches (technical data, cable materials, dimensions etc.) please refer to relevant catalogue pages
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-9-11
Basic dimensions – DM/99000/X (Non-magnetic)
Ø 12 ... 16 mm
Ø 20 ... 25 mm
Ø 12 ... 25 mm
A + stroke
2
Q
Q
Q
øI
N
O
A
0.81
0.87
0.94
1.08
1.18
1.44
1.52
1.73
2.11
2.56
3.90
3.90
4.25
(20.5)
(22)
(24)
(27.5)
(30)
(36.5)
(38.5)
(44)
(53.5)
(65)
(99)
(99)
(108)
Ø Stroke range
12
5 ... 10
16
5 ... 10
20
5 ... 10
25
5 ... 10
32
5. 10 ... 50
40
5 ... 10
50
10 ... 20
63
10 ... 50
80
10 ... 50
100 10 ... 50
125 10 ... 300
140 10 ... 300
160 10 ... 300
H
#8-32 x 0.21
#8-32 x 0.21
#10-32 x 0.28
1/4-28 x 0.39
5/16-24 x 0.50
3/8-24 x 0.50
1/2-20 x 0.50
1/2-20 x 0.50
5/8-18 x 0.88
3/4-16 x 0.88
3/4-16 x 1.06
3/4-16 x 1.06
3/4-16 x 1.06
Ø
Stroke range
12
5 ... 10
16
5 ... 10
20
5 ... 10
25
5 ... 10
32
5. 10 ... 50
40
5 ... 10
50
10 ... 20
63
10 ... 50
80
10 ... 50
100 10 ... 50
125 10 ... 300
140 10 ... 300
160 10 ... 300
ØN
0.14
0.14
0.22
0.22
0.22
0.22
0.26
0.35
0.43
0.43
0.50
0.50
0.57
(3.5)
(3.5)
(5.5)
(5.5)
(5.5)
(5.5)
(6.5)
(9)
(11)
(11)
(12.7)
(12.7)
(14.5)
AF
0.34
0.34
0.38
0.43
0.50
0.56
0.75
0.75
0.93
1.13
1.13
1.13
1.35
B
0.67
0.73
0.77
0.86
0.91
1.16
1.20
1.42
1.71
2.09
3.27
3.27
3.58
(8)
(10)
(13)
(17)
(22)
(22)
(27)
(27)
(32)
(46)
(46)
(46)
(55)
(M3 x 0.5-5 deep)
(M4 x 0.7-5 deep)
(M5 x 0.8-7 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M8 x 1.25-12 deep)
(M10 x 1.5-12 deep)
(M10 x 1.5-12 deep)
(M16 x 2.0-22 deep)
(M20 x 2.5-22 deep)
(M22 x 2.5-27 deep)
(M22 x 2.5-27 deep)
(M24 x 3.0-27 deep)
ØO
0.26 x 0.14
0.26 x 0.14
0.35 x 0.28
0.35 x 0.28
0.35 x 0.28
0.35 x 0.28
0.43 x 0.31
0.55 x 0.41
0.69 x 0.53
0.69 x 0.53
0.83 x 0.72
0.83 x 0.72
0.95 x 0.83
ØD
0.236
0.315
0.394
0.472
0.603
0.603
0.787
0.787
0.984
1.181
1.417
1.417
1.575
(17)
(18.5)
(19.5)
(22.5)
(23)
(29.5)
(30.5)
(36)
(43.5)
(53)
(83)
(83)
(91)
HM
#8-32 x 0.31
#8-32 x 0.31
#10-32 x 0.31
1/4-28 x 0.37
5/16-24 x 0.50
3/8-24 x 0.63
1/2-20 x 0.77
1/2-20 x .77
5/8-18 x 1.00
3/4-16 x 1.12
3/4-16 x 1.12
3/4-16 x 1.12
3/4-16 x 1.12
(6.5 x 3.5 deep)
(6.5 x 3.5 deep)
(9.0 x 7.0 deep)
(9.0 x 7.0 deep)
(9.0 x 7.0 deep)
(9.0 x 7.0 deep)
(11.0 x 8.0 deep)
(14.0 x 10.5 deep)
(17.5 x 13.5 deep)
(17.5 x 13.5 deep)
(21.2 x 18.4 deep)
(21.2 x 18.4 deep)
(24.2 x 21.2 deep)
0.395 (10)
…E
1.09
1.25
–
–
–
–
–
–
–
–
–
–
–
(6)
(8)
(10)
(12)
(16)
(16)
(20)
(20)
(25)
(30)
(36)
(36)
(40)
(M5 x 0.8-9 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M10 x 1.25-15 deep)
(M14 x 1.5-20.5 deep)
(M14 x 1.5-20.5 deep)
(M18 x 1.5-26 deep)
(M18 x 1.5-26 deep)
(M22 x 1.5-32.5 deep)
(M26 x 1.5-32.5 deep)
(M30 x 1.5-42 deep)
(M30 x 1.5-42 deep)
(M36 x 1.5-47 deep)
P*
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
1/8*
1/4*
1/4*
3/8*
3/8*
3/8*
3/8*
3/8*
)
(3
LM
AF
°
X
30
0.475 (12.1) – Ø 40...100
0.455 (11.6) – Ø 32
øD
K
M
W
E1
Z
12
Ø 12 ... 160 mm
Section Z
0.180 (4.6) – Ø 80
0.098 (2.9) – Ø 40
0.12 (3)
HM
L
Z
P
30
°
D*/99000 . . .
H
B + stroke
0.
N
Section X
A + stroke
M
ACT-9-12
O
Y
N
Y ø 20 = 55°
Y ø 25 = 45°
E1
E1
0)
(1
K
Y ø 12 = 65°
Y ø 16 = 55°
E
Stroke range
5 ... 10
5 ... 10
5 ... 10
5 ... 10
5. 10 ... 50
5 ... 10
10 ... 20
10 ... 50
10 ... 50
10 ... 50
10 ... 300
10 ... 300
10 ... 300
X
øI
E1
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
Section Z
øD
E1
øD
E1
X
O
Y
Z
5
39
0.
øI
K
Q
45°
M
Z
Ø 32 ... 160 mm
Q
E
45°
Section X
B + stroke
L
M
2
P
Q
H
B + stroke
L
P
E
A + stroke
ØI
1.24
1.46
1.85
2.02
2.32
2.72
3.34
4.01
5.11
6.06
7.48
8.27
9.37
Q
0.28
0.31
0.32
0.33
0.34
0.36
0.41
0.45
0.55
0.71
0.96
0.96
1.08
(31.5)
(37.1)
(47)
(51.3)
(58.9)
(69)
(84.9)
(101.8)
(129.8)
(153.9)
(190)
(210)
(238)
(7)
(7.8)
(8.1)
(8.4)
(8.7)
(9.2)
(10.5)
(11.5)
(14)
(18)
(24.5)
(24.5)
(27.5)
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
3.02
3.85
4.54
5.59
6.22
7.01
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
K
0.20
0.24
0.31
0.39
0.55
0.55
0.67
0.67
0.87
1.06
1.26
1.26
1.42
W
–
–
–
–
1.94
2.24
2.78
3.29
4.09
4.8
6.02
6.61
7.4
(5)
(6)
(8)
(10)
(14)
(14)
(17)
(17)
(22)
(27)
(32)
(32)
(36)
(–)
(–)
(–)
(–)
(49.3)
(57)
(70.6)
(83.6)
(104)
(121.9)
(153)
(168)
(188)
E2
0.90
1.07
1.23
1.45
–
–
–
–
–
–
–
–
–
(25)
(29)
(36)
(40)
(44.5)
(52)
(63.7)
(76.7)
(97.8)
(115.3)
(142)
(158)
(178)
L
0.14
0.14
0.18
0.20
0.28
0.28
0.31
0.31
0.39
0.47
0.63
0.63
0.67
(3.5)
(3.5)
(4.5)
(5)
(7)
(7)
(8)
(8)
(10)
(12)
(16)
(16)
(17)
Z
–
–
–
–
0.84
0.84
1.04
1.04
1.18
1.18
1.53
1.53
1.53
LM
0.45
0.45
0.49
0.57
0.78
0.91
1.08
1.08
1.40
1.59
1.75
1.75
1.79
(23)
(27.2)
(31.2)
(36.9)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(14)
(15.5)
(18.5)
(22.5)
(28.5)
(28.5)
(33.5)
(33.5)
(43.5)
(43.5)
(58)
(58)
(64)
(–)
(–)
(–)
(–)
(21.4)
(21.4)
(26.5)
(26.5)
(30)
(30)
(39)
(39)
(39)
* Port sizes: DM/99000/... = G (BSP parallel ports), DC/99000/... = NPT (NPT ports). Note: M5 x 0.8 port will accept #10-32 male thread fittings.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
M
0.87
1.10
1.42
1.57
1.34
1.57
1.97
2.36
3.03
3.70
4.49
5.04
5.67
(22)
(28)
(36)
(40)
(34)
(40)
(50)
(60)
(77)
(94)
(114)
(128)
(144)
Basic dimensions – DM/99000/MX (Magnetic)
Ø 20 ... 25 mm
2
45°
Q
M
B + stroke
L
0.
28
Elect. 19
E
E
B + stroke
Reed stroke
25 mm
Elect. 19 mm
Reed 25
Q
2
L
0.2
P
Ø 12 ... 25 mm
A + stroke
(7
)
A+
)
7
8(
Section X
Reed
25 25 mm
Reed
Elect.
19 19 mm
Elect.
P
H
Ø 12 ... 16 mm
Q
Q
Ø 12 ... 160 mm
Section Z
Q
Q
Ø
Stroke range
12
5 ... 30
16
5 ... 30
20
5 ... 50
25
5 ... 50
32
5 ... 50
40
5 ... 50
50
10 ... 50
63
10 ... 50
80
10 ... 50
100 10 ... 50
125 10 ... 300
140 10 ... 300
160 10 ... 300
A
1.24
1.34
1.42
1.48
1.57
1.83
1.91
2.13
2.50
2.95
3.90
3.90
4.25
(31.5)
(34)
(36)
(37.5)
(40)
(46.5)
(48.5)
(54)
(63.5)
(75)
(99)
(99)
(108)
H
#8-32 x 0.21
#8-32 x 0.21
#10-32 x 0.28
1/4-28 x 0.39
5/16-24 x 0.50
3/8-24 x 0.50
1/2-20 x 0.50
1/2-20 x 0.50
5/8-18 x 0.88
3/4-16 x 0.88
3/4-16 x 1.06
3/4-16 x 1.06
3/4-16 x 1.06
AF
0.34
0.34
0.38
0.43
0.50
0.56
0.75
0.75
0.93
1.13
1.13
1.13
1.35
B
1.10
1.20
1.24
1.28
1.30
1.56
1.59
1.81
2.11
2.48
3.27
3.27
3.58
(8)
(10)
(13)
(17)
(22)
(22)
(27)
(27)
(32)
(46)
(46)
(46)
(55)
(M3 x 0.5-5 deep)
(M4 x 0.7-5 deep)
(M5 x 0.8-7 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M8 x 1.25-12 deep)
(M10 x 1.5-12 deep)
(M10 x 1.5-12 deep)
(M16 x 2.0-22 deep)
(M20 x 2.5-22 deep)
(M22 x 2.5-27 deep)
(M22 x 2.5-27 deep)
(M24 x 3.0-27 deep)
ØD
0.236
0.315
0.394
0.472
0.630
0.630
0.787
0.787
0.984
1.181
1.417
1.417
1.575
(28)
(30.5)
(31.5)
(32.5)
(33)
(39.5)
(40.5)
(46)
(53.5)
(63)
(83)
(83)
(91)
HM
#8-32 x 0.31
#8-32 x 0.31
#10-32 x 0.31
1/4-28 x 0.37
5/16-24 x 0.50
3/8-24 x 0.63
1/2-20 x 0.77
1/2-20 x .77
5/8-18 x 1.00
3/4-16 x 1.12
3/4-16 x 1.12
3/4-16 x 1.12
3/4-16 x 1.12
0.395 (10)
…E
1.09
1.25
–
–
–
–
–
–
–
–
–
–
–
(6)
(8)
(10)
(12)
(16)
(16)
(20)
(20)
(25)
(30)
(36)
(36)
(40)
(M5 x 0.8-9 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M10 x 1.25-15 deep)
(M14 x 1.5-20.5 deep)
(M14 x 1.5-20.5 deep)
(M18 x 1.5-26 deep)
(M18 x 1.5-26 deep)
(M22 x 1.5-32.5 deep)
(M26 x 1.5-32.5 deep)
(M30 x 1.5-42 deep)
(M30 x 1.5-42 deep)
(M36 x 1.5-47 deep)
ØI
1.24
1.46
1.85
2.02
2.32
2.72
3.34
4.01
5.11
6.06
7.48
8.27
9.37
ØN
ØO
P*
Q
0.14 (3.5)
0.26 x 0.14 (6.5 x 3.5 deep)
M5 x 0.8
0.28
0.14 (3.5)
0.26 x 0.14 (6.5 x 3.5 deep)
M5 x 0.8
0.31
0.22 (5.5)
0.35 x 0.28 (9.0 x 7.0 deep)
M5 x 0.8
0.32
0.22 (5.5)
0.35 x 0.28 (9.0 x 7.0 deep)
M5 x 0.8
0.33
0.22 (5.5)
0.35 x 0.28 (9.0 x 7.0 deep)
1/8*
0.34
0.22 (5.5)
0.35 x 0.28 (9.0 x 7.0 deep)
1/8*
0.36
0.26 (6.6)
0.43 x 0.31 (11.0 x 8.0 deep)
1/4*
0.41
0.35 (9)
0.55 x 0.41 (14.0 x 10.5 deep) 1/4*
0.45
0.43 (11)
0.69 x 0.53 (17.5 x 13.5 deep) 3/8*
0.55
0.43 (11)
0.69 x 0.53 (17.5 x 13.5 deep) 3/8*
0.71
0.50 (12.7)
0.83 x 0.72 (21.2 x 18.4 deep) 3/8*
0.96
0.50 (12.7)
0.83 x 0.72 (21.2 x 18.4 deep) 3/8*
0.96
0.57 (14.5)
0.95 x 0.83 (24.2 x 21.2 deep) 3/8*
1.08
* Port sizes: DM/99000/... = G (BSP parallel ports), DC/99000/... = NPT (NPT ports).
Brookville, OH USA
)
(3
12
Reed 25
Reed 25 mm
Elect. 19
Elect. 19 mm
°
N
O
LM
0.28 (7)
30
0.475 (12.1) – Ø 40...100
0.455 (11.6) – Ø 32
øD
K
M
W
E1
øI
0.180 (4.6) – Ø 80
0.098 (2.9) – Ø 40
0.12 (3)
X
Ø Stroke range
12
5 ... 30
16
5 ... 30
20
5 ... 50
25
5 ... 50
32
5 ... 50
40
5 ... 50
50
10 ... 50
63
10 ... 50
80
10 ... 50
100 10 ... 50
125 10 ... 300
140 10 ... 300
160 10 ... 300
AF
HM
0.28 (7)
0.
E1
H
Reed 25
Z
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 300
10 ... 300
10 ... 300
D*/99000/M
Section X
Reed 25 mm
Elect. 19
19 mm
Elect.
Z
O
N
stroke
30
°
Y ø 20 = 55°
Y ø 25 = 45°
B + stroke
M
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
X
Y
A+
L
E1
P
øD
E1
O
Y
N
øD
K
E1
Ø 32 ... 160 mm
0)
(1
E
5
39
0.
Y ø 12 = 65°
Y ø 16 = 55°
øI
E1
Section Z
Z
X
øI
K
45°
M
Z
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(31.5)
(37.1)
(47)
(51.3)
(58.9)
(69)
(84.9)
(101.8)
(129.8)
(153.9)
(190)
(210)
(238)
K
0.20
0.24
0.31
0.39
0.55
0.55
0.67
0.67
0.87
1.06
1.26
1.26
1.42
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
3.02
3.85
4.54
5.59
6.22
7.01
(5)
(6)
(8)
(10)
(14)
(14)
(17)
(17)
(22)
(27)
(32)
(32)
(36)
E2
0.90
1.07
1.23
1.45
–
–
–
–
–
–
–
–
–
(25)
(29)
(36)
(40)
(44.5)
(52)
(63.7)
(76.7)
(97.8)
(115.3)
(142)
(158)
(178)
L
0.14
0.14
0.18
0.20
0.28
0.28
0.31
0.31
0.39
0.47
0.63
0.63
0.67
(3.5)
(3.5)
(4.5)
(5)
(7)
(7)
(8)
(8)
(10)
(12)
(16)
(16)
(17)
LM
0.45
0.45
0.49
0.57
0.78
0.91
1.08
1.08
1.40
1.59
1.75
1.75
1.79
(23)
(27.2)
(31.2)
(36.9)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(14)
(15.5)
(18.5)
(22.5)
(28.5)
(28.5)
(33.5)
(33.5)
(43.5)
(43.5)
(58)
(58)
(64)
M
0.87
1.10
1.42
1.57
1.34
1.57
1.97
2.36
3.03
3.70
4.49
5.04
5.67
(22)
(28)
(36)
(40)
(34)
(40)
(50)
(60)
(77)
(94)
(114)
(128)
(144)
W
Z
(7)
–
(–)
–
(–)
(7.8)
–
(–)
–
(–)
(8.1)
–
(–)
–
(–)
(8.4)
–
(–)
–
(–)
(8.7)
1.94
(49.3)
0.84
(21.4)
(9.2)
2.24
(57)
0.84
(21.4)
(10.5)
2.78
(70.6)
1.04
(26.5)
(11.5)
3.29
(83.6)
1.04
(26.5)
(14.0)
4.09
(104)
1.18
(30)
(18)
4.80
(121.9)
1.18
(30)
(24.5)
6.02
(153)
1.53
(39)
(24.5)
6.61
(168)
1.53
(39)
(27.5)
7.40
(188)
1.53
(39)
Note: M5 x 0,8 port will accept #10-32 male thread fittings.
Phone 937-833-4033
www.norgren.com
ACT-9-13
Double ended piston rod – DM/99000/JX (Non-magnetic)
A + (2 x stroke
Ø 20 ... 25 mm
)
L + stroke B + stroke L
E
Section X
L + stroke
H
L
B + stroke
*
P
X
N
O
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 300
10 ... 300
10 ... 300
A
1.27
1.30
1.38
1.54
1.75
2.13
2.22
2.28
2.80
3.33
4.53
4.53
4.92
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 300
10 ... 300
10 ... 300
H
#8-32 x 0.21 deep (M3 x 0.5-5)
#8-32 x 0.21 deep (M4 x 0.7-5)
#10-32 x 0.28 deep (M5 x 0.8-7)
1/4-28 x 0.39 deep (M6 x 1.0-10)
5/16-24 x 0.50 deep (M8 x 1.25-12)
3/8-24 x 0.50 deep (M8 x 1.25-12)
1/2-20 x 0.50 deep (M10 x 1.5-12)
1/2-20 x 0.50 deep (M10 x 1.5-12)
5/8-18 x 0.88 deep (M16 x 2.0-22)
3/4-16 x 0.88 deep (M20 x 2.5-22)
3/4-16 x 1.06 deep (M22 x 2.5-27)
3/4-16 x 1.06 deep (M22 x 2.5-27)
3/4-16 x 1.06 deep (M24 x 3.0-27)
ACT-9-14
ØN
0.14
0.14
0.22
0.22
0.22
0.22
0.26
0.35
0.43
0.43
0.50
0.50
0.57
(32.2)
(33.0)
(35.0)
(39.0)
(44.5)
(54.0)
(56.5)
(58.0)
(71.0)
(84.5)
(115)
(115)
(125)
(3.5)
(3.5)
(5.5)
(5.5)
(5.5)
(5.5)
(6.6)
(9)
(11)
(11)
(12.7)
(12.7)
(14.5)
AF
0.34
0.34
0.38
0.43
0.50
0.56
0.75
0.75
0.93
1.13
1.13
1.13
1.35
(8)
(10)
(13)
(17)
(22)
(22)
(27)
(27)
(32)
(46)
(46)
(46)
(55)
ØO
0.26 x 0.14
0.26 x 0.14
0.35 x 0.28
0.35 x 0.28
0.35 x 0.28
0.35 x 0.28
0.43 x 0.31
0.55 x 0.41
0.69 x 0.53
0.69 x 0.53
0.83 x 0.72
0.83 x 0.72
0.95 x 0.83
B
0.99
1.02
1.02
1.14
1.20
1.57
1.59
1.65
2.01
2.38
3.27
3.27
3.58
(25.2)
(26.0)
(26.0)
(29.0)
(30.5)
(40.0)
(40.5)
(42.0)
(51.0)
(60.5)
(83.0)
(83.0)
(91.0)
ØD
0.236
0.315
0.394
0.472
0.630
0.630
0.787
0.787
0.984
1.181
1.417
1.417
1.575
HM
#8-32 x 0.31
#8-32 x 0.31
#10-32 x 0.31
1/4-28 x 0.37
5/16-24 x 0.50
3/8-24 x 0.63
1/2-20 x 0.77
1/2-20 x .77
5/8-18 x 1.00
3/4-16 x 1.12
3/4-16 x 1.12
3/4-16 x 1.12
3/4-16 x 1.12
(6.5 x 3.5 deep)
(6.5 x 3.5 deep)
(9.0 x 7.0 deep)
(9.0 x 7.0 deep)
(9.0 x 7.0 deep)
(9.0 x 7.0 deep)
(11.0 x 8.0 deep)
(14.0 x 10.5 deep)
(17.5 x 13.5 deep)
(17.5 x 13.5 deep)
(21.2 x 18.4 deep)
(21.2 x 18.4 deep)
(24.2 x 21.2 deep)
(6)
(8)
(10)
(12)
(16)
(16)
(20)
(20)
(25)
(30)
(36)
(36)
(40)
0.395 (10)
…E
1.09
1.25
–
–
–
–
–
–
–
–
–
–
–
(M5 x 0.8-9)
(M6 x 1.0-10)
(M8 x 1.25-12)
(M10 x 1.25-15)
(M14 x 1.5-20.5)
(M14 x 1.5-20.5)
(M18 x 1.5-26)
(M18 x 1.5-26)
(M22 x 1.5-32.5)
(M26 x 1.5-32.5)
(M30 x 1.5-42)
(M30 x 1.5-42)
(M36 x 1.5-47)
P*
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
1/8*
1/8*
1/4*
1/4*
3/8*
3/8*
3/8*
3/8*
3/8*
Q
0.28
0.31
0.32
0.33
0.34
0.36
0.41
0.45
0.55
0.71
0.96
0.96
1.08
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
3.02
3.85
4.54
5.59
6.22
7.01
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
ØI
1.24
1.46
1.85
2.02
2.32
2.72
3.34
4.01
5.11
6.06
7.48
8.27
9.37
(31.5)
(37.1)
(47)
(51.3)
(58.9)
(69)
(84.9)
(101.8)
(129.8)
(153.9)
(190)
(210)
(238)
(7.0)
(7.8)
(8.1)
(8.4)
(8.7)
(9.2)
(10.5)
(11.5)
(14.0)
(18.0)
(24.5)
(24.5)
(27.5)
(25)
(29)
(36)
(40)
(44.5)
(52)
(63.7)
(76.7)
(97.8)
(115.3)
(142)
(158)
(178)
K
0.20
0.24
0.31
0.39
0.55
0.55
0.67
0.67
0.87
1.06
1.26
1.26
1.42
W
–
–
–
–
1.94
2.24
2.78
3.29
4.09
4.80
6.02
6.61
7.40
E2
0.90
1.07
1.23
1.45
–
–
–
–
–
–
–
–
–
(5)
(6)
(8)
(10)
(14)
(14)
(17)
(17)
(22)
(27)
(32)
(32)
(36)
(–)
(–)
(–)
(–)
(49.3)
(57.0)
(70.6)
(83.6)
(104)
(121.9)
(153)
(168)
(188)
)
(23)
(27.2)
(31.2)
(36.9)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
L
0.14
0.14
0.18
0.20
0.28
0.28
0.31
0.31
0.39
0.47
0.63
0.63
0.67
(3.5)
(3.5)
(4.5)
(5)
(7)
(7)
(8)
(8)
(10)
(12)
(16)
(16)
(17)
Z
–
–
–
–
0.84
0.84
1.04
1.04
1.18
1.18
1.53
1.53
1.53
LM
0.45
0.45
0.49
0.57
0.78
0.91
1.08
1.08
1.40
1.59
1.75
1.75
1.79
(14)
(15.5)
(18.5)
(22.5)
(28.5)
(28.5)
(33.5)
(33.5)
(43.5)
(43.5)
(58)
(58)
(64)
(–)
(–)
(–)
(–)
(21.4)
(21.4)
(26.5)
(26.5)
(30.0)
(30.0)
(39.0)
(39.0)
(39.0)
Brookville, OH USA
0.
LM
AF
30
X
°
0.475 (12.1) – Ø 40...100
0.455 (11.6) – Ø 32
øD
M
W
E1
øI
0.180 (4.6) – Ø 80
0.098 (2.9) – Ø 40
0.12 (3)
Z
Ø 12 ... 160 mm
Section Z
Q
Q
HM
K
)
30
°
Cylinders with rod end male thread
D*/99000/J
M
A + (2 x stroke
(3
E1
Y ø 20 = 55°
Y ø 25 = 45°
E1
Z
12
N
O
N
0)
(1
K
Y ø 12 = 65°
Y ø 16 = 55°
E1
Ø
Stroke range
12
5 ... 30
16
5 ... 30
20
5 ... 50
25
5 ... 50
32
5. 10 ... 50
40
5 ... 50
50
10 ... 50
63
10 ... 50
80
10 ... 50
100 10 ... 50
125 10 ... 300
140 10 ... 300
160 10 ... 300
5
39
0.
Ø 32 ... 160 mm
X
X
øI
E
øI
K
Section Z
Y
X
X
øD
Z
øD
O
Y
E1
45°
M
Z
E1
Section X
L
Q
Q
Q
45°
Ø 12 ... 25 mm
)
B + stroke
M
E
L + stroke
2
Q
P
2
A + (2 x stroke
P
H
Ø 12 ... 16 mm
Phone 937-833-4033
www.norgren.com
M
0.87
1.10
1.42
1.57
1.34
1.57
1.97
2.36
3.03
3.70
4.49
5.04
5.67
(22)
(28)
(36)
(40)
(34)
(40)
(50)
(60)
(77)
(94)
(114)
(128)
(144)
Double ended piston rod – DM/99000/JMX (Magnetic)
Ø 20 ... 25 mm
2
Q
)
(3
12
øD
O
N
Y
X
30
°
øI
Y ø 20 = 55°
Y ø 25 = 45°
E1
Ø 32 ... 160 mm
Section X
A + (2 x
L + stroke
M
Z
B+
stroke
L
Reed 25
Reed
25 mm
Elect. 19
Elect. 19 mm
Section Z
N
Ø Stroke range
12
5 ... 30
16
5 ... 30
20
5 ... 50
25
5 ... 50
32
5 ... 50
40
5 ... 50
50
10 ... 50
63
10 ... 50
80
10 ... 50
100 10 ... 50
125 10 ... 300
140 10 ... 300
160 10 ... 300
Ø
Stroke range
12
5 ... 30
16
5 ... 30
20
5 ... 50
25
5 ... 50
32
5 ... 50
40
5 ... 50
50
10 ... 50
63
10 ... 50
80
10 ... 50
100 10 ... 50
125 10 ... 300
140 10 ... 300
160 10 ... 300
A
1.55
1.69
1.85
1.93
2.15
2.52
2.62
2.68
3.19
3.72
4.53
4.53
4.92
(39.4)
(43.0)
(47.0)
(49.0)
(54.5)
(64.0)
(66.5)
(68.0)
(81.0)
(94.5)
(115)
(115)
(125)
H
#8-32 x .21
#8-32 x .21
#10-32 x .28
1/4-28 x .39
5/16-24 x .50
3/8-24 x .50
1/2-20 x .50
1/2-20 x .50
5/8-18 x .88
3/4-16 x .88
3/4-16 x 1.06
3/4-16 x 1.06
3/4-16 x 1.06
ØN
0.14
0.14
0.22
0.22
0.22
0.22
0.26
0.35
0.43
0.43
0.50
0.50
0.57
X
O
X
AF
0.34
0.34
0.38
0.43
0.50
0.56
0.75
0.75
0.93
1.13
1.13
1.13
1.35
(8)
(10)
(13)
(17)
(22)
(22)
(27)
(27)
(32)
(46)
(46)
(46)
(55)
B
1.28
1.42
1.50
1.54
1.59
1.97
1.99
2.05
2.40
2.78
3.27
3.27
3.58
(M3 x 0.5-5 deep)
(M4 x 0.7-5 deep)
(M5 x 0.8-7 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M8 x 1.25-12 deep)
(M10 x 1.5-12 deep)
(M10 x 1.5-12 deep)
(M16 x 2.0-22 deep)
(M20 x 2.5-22 deep)
(M22 x 2.5-27 deep)
(M22 x 2.5-27 deep)
(M24 x 3.0-27 deep)
(32.4)
(36.0)
(38.0)
(39)
(40.5)
(50.0)
(50.5)
(52.0)
(61.0)
(70.5)
(83.0)
(83.0)
(91.0)
ØD
0.236
0.315
0.394
0.472
0.630
0.630
0.787
0.787
0.984
1.181
1.417
1.417
1.575
HM
#8-32 x 0.31
#8-32 x 0.31
#10-32 x 0.31
1/4-28 x 0.37
5/16-24 x 0.50
3/8-24 x 0.63
1/2-20 x 0.77
1/2-20 x .77
5/8-18 x 1.00
3/4-16 x 1.12
3/4-16 x 1.12
3/4-16 x 1.12
3/4-16 x 1.12
(6)
(8)
(10)
(12)
(16)
(16)
(20)
(20)
(25)
(30)
(36)
(36)
(40)
…E
1.09
1.25
–
–
–
–
–
–
–
–
–
–
–
(M5 x 0.8-9 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M10 x 1.25-15 deep)
(M14 x 1.5-20.5 deep)
(M14 x 1.5-20.5 deep)
(M18 x 1.5-26 deep)
(M18 x 1.5-26 deep)
(M22 x 1.5-32.5 deep)
(M26 x 1.5-32.5 deep)
(M30 x 1.5-42 deep)
(M30 x 1.5-42 deep)
(M36 x 1.5-47 deep)
LM
0.28 (7)
Elect. 19 mm
HM
M
øD
0.475 (12.1) – Ø 40...100
0.455 (11.6) – Ø 32
øI
Z
AF
0.395 (10)
Q
Reed 25
Elect.
Reed1925 mm
Ø 12 ... 160 mm
0.180 (4.6) – Ø 80
0.098 (2.9) – Ø 40
0.12 (3)
Q
°
0.28 (7)
P
30
K
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 300
10 ... 300
10 ... 300
D*/99000/JM
stroke )
H
E1
W
X
øI
Y ø 12 = 65°
Y ø 16 = 55°
E
E1
E1
øD
E1
N
O
X
0)
(1
X
5
39
0.
Y
Section Z
Z
K
E1
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
Q
45°
M
Z
K
H
Elect. 19 mm
Q
P
0.
Q
45°
L
Reed
25 25 mm
Reed
Elect.
19 19 mm
Elect.
Section X
L
M
E
2
L + stroke B + stroke
stroke B + stroke
Reed 25
Reed
25 mm
Elect. 19
E
8(
0.2
P
L+
0.
28
A + (2 x stroke )
7)
Ø 12 ... 25 mm
A + (2 x stroke)
(7
)
Ø 12 ... 16 mm
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
ØI
1.24
1.46
1.85
2.02
2.32
2.72
3.34
4.01
5.11
6.06
7.48
8.27
9.37
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
3.02
3.85
4.54
5.59
6.22
7.01
(31.5)
(37.1)
(47)
(51.3)
(58.9)
(69)
(84.9)
(101.8)
(129.8)
(153.9)
(190)
(210)
(238)
(25)
(29)
(36)
(40)
(44.5)
(52)
(63.7)
(76.7)
(97.8)
(115.3)
(142)
(158)
(178)
K
0.20
0.24
0.31
0.39
0.55
0.55
0.67
0.67
0.87
1.06
1.26
1.26
1.42
(5)
(6)
(8)
(10)
(14)
(14)
(17)
(17)
(22)
(27)
(32)
(32)
(36)
E2
0.90
1.07
1.23
1.45
–
–
–
–
–
–
–
–
–
L
0.14
0.14
0.18
0.20
0.28
0.28
0.31
0.31
0.39
0.47
0.63
0.63
0.67
(23)
(27.2)
(31.2)
(36.9)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(3.5)
(3.5)
(4.5)
(5)
(7)
(7)
(8)
(8)
(10)
(12)
(16)
(16)
(17)
LM
0.45
0.45
0.49
0.57
0.78
0.91
1.08
1.08
1.40
1.59
1.75
1.75
1.79
(14)
(15.5)
(18.5)
(22.5)
(28.5)
(28.5)
(33.5)
(33.5)
(43.5)
(43.5)
(58)
(58)
(64)
M
0.87
1.10
1.42
1.57
1.34
1.57
1.97
2.36
3.03
3.70
4.49
5.04
5.67
(22)
(28)
(36)
(40)
(34)
(40)
(50)
(60)
(77)
(94)
(114)
(128)
(144)
ØO
P*
Q
W
Z
(3.5)
0.26 x 0.14 (6.5 x 3.5 deep)
M5 x 0.8
0.28 (7.0)
–
(–)
–
(–)
(3.5)
0.26 x 0.14 (6.5 x 3.5 deep)
M5 x 0.8
0.31 (7.8)
–
(–)
–
(–)
(5.5)
0.35 x 0.28 (9.0 x 7.0 deep)
M5 x 0.8
0.32 (8.1)
–
(–)
–
(–)
(5.5)
0.35 x 0.28 (9.0 x 7.0 deep)
M5 x 0.8
0.33 (8.4)
–
(–)
–
(–)
(5.5)
0.35 x 0.28 (9.0 x 7.0 deep)
1/8*
0.34 (8.7)
1.94
(49.3)
0.84
(21.4)
(5.5)
0.35 x 0.28 (9.0 x 7.0 deep)
1/8*
0.36 (9.2)
2.24
(57.0)
0.84
(21.4)
(6.6)
0.43 x 0.31 (11.0 x 8.0 deep)
1/4*
0.41 (10.5)
2.78
(70.6)
1.04
(26.5)
(9)
0.55 x 0.41 (14.0 x 10.5 deep) 1/4*
0.45 (11.5)
3.29
(83.6)
1.04
(26.5)
(11)
0.69 x 0.53 (17.5 x 13.5 deep) 3/8*
0.55 (14.0)
4.09
(104)
1.18
(30.0)
(11)
0.69 x 0.53 (17.5 x 13.5 deep) 3/8*
0.71 (18.0)
4.80
(121.9)
1.18
(30.0)
(12.7)
0.83 x 0.72 (21.2 x 18.4 deep) 3/8*
0.96 (24.5)
6.02
(153)
1.53
(39.0)
(12.7)
0.83 x 0.72 (21.2 x 18.4 deep) 3/8*
0.96 (24.5)
6.61
(168)
1.53
(39.0)
(14.5)
0.95 x 0.83 (24.2 x 21.2 deep) 3/8*
1.08 (27.5)
7.40
(188)
1.53
(39.0)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-9-15
Cylinders with non-rotating piston rod – DM/99000/N1X (Non-magnetic)
Ø 12 ... 16 mm
Ø 20 ... 25 mm
E
A + stroke
K
L
B + stroke
G
2
G
0.20 (5)
E
2
Section X
B + stroke
L
K
H
E1
0.20 (5)
M
E
Ø 12 ... 25 mm
A + stroke
E1
M
øD
O
N
øI
)
(3
12
N
0.
øT
E1
0)
(1
O
E1
5
39
0.
øD
Section Z
øI
30
°
Ø 32 mm
Ø 40 ... 100 mm
A + stroke
0.35 (9)
Q
K
Q
Section Z
WARNING: This cylinder has a non-rotating rod. To prevent internal damage hold rod by flats ONLY WHEN
FULLY RETRACTED while installing or removing attachments. DO NOT SCRATCH OR DENT SHAFT.
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
A
1.00
1.06
1.26
1.40
1.54
1.44
1.52
1.73
2.11
2.56
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
H
#8-32 x 0.21
#8-32 x 0.21
#10-32 x 0.28
1/4-28 x 0.39
5/16-24 x 0.50
3/8-24 x 0.50
1/2-20 x 0.50
1/2-20 x 0.50
5/8-18 x 0.88
3/4-16 x 0.88
Ø
Stroke range
12
5 ... 30
16
5 ... 30
20
5 ... 50
25
5 ... 50
32
5. 10 ... 50
40
5 ... 50
50
10 ... 50
63
10 ... 50
80
10 ... 50
100 10 ... 50
AF
0.34
0.34
0.38
0.43
0.50
0.56
0.75
0.75
0.93
1.13
(25.5)
(27.0)
(32.0)
(35.5)
(39.0)
(36.5)
(38.5)
(44.0)
(53.5)
(65.0)
(8)
(10)
(13)
(17)
(22)
(22)
(27)
(27)
(32)
(46)
B
0.87
0.93
1.08
1.20
1.26
1.16
1.20
1.42
1.71
2.09
(M3 x 0.5-5 deep)
(M4 x 0.7-5 deep)
(M5 x 0.8-7 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M8 x 1.25-12 deep)
(M10 x 1.5-12 deep)
(M10 x 1.5-12 deep)
(M16 x 2.0-22 deep)
(M20 x 2.5-22 deep)
ØD
0.236
0.315
0.394
0.472
0.630
0.630
0.787
0.787
0.984
1.181
(22.0)
(23.5)
(27.5)
(30.5)
(32.0)
(29.5)
(30.5)
(36.0)
(43.5)
(53.0)
HM
#8-32 x 0.31
#8-32 x 0.31
#10-32 x 0.31
1/4-28 x 0.37
5/16-24 x 0.50
3/8-24 x 0.63
1/2-20 x 0.77
1/2-20 x .77
5/8-18 x 1.00
3/4-16 x 1.12
…E
1.09
1.25
–
–
–
–
–
–
–
–
(6)
(8)
(10)
(12)
(16)
(16)
(20)
(20)
(25)
(30)
(M5 x 0.8-9 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M10 x 1.25-15 deep)
(M14 x 1.5-20.5 deep)
(M14 x 1.5-20.5 deep)
(M18 x 1.5-26 deep)
(M18 x 1.5-26 deep)
(M22 x 1.5-32.5 deep)
(M26 x 1.5-32.5 deep)
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
ØI
1.24
1.46
1.85
2.02
2.32
2.72
3.34
4.01
5.11
6.06
(31.5)
(37.1)
(47)
(51.3)
(58.9)
(69)
(84.9)
(101.8)
(129.8)
(153.9)
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
3.02
3.85
4.54
(25)
(29)
(36)
(40)
(44.5)
(52)
(63.7)
(76.7)
(97.8)
(115.3)
K
0.20
0.24
0.31
0.39
0.55
0.55
0.71
0.71
0.87
1.06
(5.2)
(6)
(8)
(10)
(14)
(14)
(18)
(18)
(22)
(27)
E2
0.90
1.07
1.23
1.45
–
–
–
–
–
–
L
0.14
0.14
0.18
0.20
0.28
0.28
0.31
0.31
0.39
0.47
(3.5)
(3.5)
(4.5)
(5)
(7)
(7)
(8)
(8)
(10)
(12)
G
0.059
0.059
0.079
0.079
0.079
0.079
0.079
0.079
0.079
0.079
(23)
(27.2)
(31.2)
(36.9)
(–)
(–)
(–)
(–)
(–)
(–)
LM
0.45
0.45
0.49
0.57
0.78
0.91
1.08
1.08
1.40
1.59
(14)
(15.5)
(18.5)
(22.5)
(28.5)
(28.5)
(33.5)
(33.5)
(43.5)
(43.5)
M
0.87
1.10
1.42
1.57
1.34
1.57
1.97
2.36
3.03
3.7
(22)
(28)
(36)
(40)
(34)
(40)
(50)
(60)
(77)
(94)
ØO
P*
Q
ØT
W
Z
0.26 x 0.14 (6.5 x 3.5)
M5 x 0.8
0.28 (7.0)
0.591 ±0.002 (15 ±0.043)
–
(–)
–
(–)
0.26 x 0.14 (6.5 x 3.5)
M5 x 0.8
0.31 (7.8)
0.787 ±0.002 (20 ±0.052)
–
(–)
–
(–)
0.35 x 0.28 (9.0 x 7.0)
M5 x 0.8
0.32 (8.1)
0.512 ±0.002 (13 ±0.043)
–
(–)
–
(–)
0.35 x 0.28 (9.0 x 7.0)
M5 x 0.8
0.33 (8.4)
0.591 ±0.002 (15 ±0.043)
–
(–)
–
(–)
0.35 x 0.28 (9.0 x 7.0)
M5 x 0.8
0.34 (8.7)
0.827 ±0.002 (21 ±0.062)
1.94 (49.3)
0.84 (21.4)
0.35 x 0.28 (9.0 x 7.0)
1/8*
0.36 (9.2)
1.102 ±0.002 (28 ±0.062)
2.24 (57.0)
0.84 (21.4)
0.43 x 0.31 (11.0 x 8.0)
1/4*
0.41 (10.5)
1.378 ±0.002 (35 ±0.062)
2.78 (70.6)
1.04 (26.5)
0.55 x 0.41 (14.0 x 10.5) 1/4*
0.45 (11.5)
1.378 ±0.002 (35 ±0.062)
3.29 (83.6)
1.04 (26.5)
0.69 x 0.53 (17.5 x 13.5) 3/8*
0.55 (14.0)
1.693 ±0.002 (43 ±0.062)
4.09 (104)
1.18 (30.0)
0.69 x 0.53 (17.5 x 13.5) 3/8*
0.71 (18.0)
2.323 ±0.003 (59 ±0.074)
4.8
(121.9)
1.18 (30.0)
Deflection of the mounting plate B (°) at instroke position without load
ACT-9-16
12
±2°
16
±1°
20
±1°
25
±1°
32
±0.8°
40
±0.8°
50
±0.8°
Brookville, OH USA
63
±0.8°
80
±0.8°
100
±0.8°
Phone 937-833-4033
www.norgren.com
ØN
0.14
0.14
0.22
0.22
0.22
0.22
0.26
0.35
0.43
0.43
0.395 (10)
°
(1.5)
(1.5)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
Non-rotation accuracy
Ø
30
N
O
0.475 (12.1) – Ø 40...100
0.455 (11.6) – Ø 32
øT
N
O
øD
M
W
E1
0.180 (4.6) – Ø 80
0.098 (2.9) – Ø 40
0.12 (3)
øT
M
W
Q
øI
øI
E1
G
Z
Q
Section X
B + stroke
L
M
G
Z
K
A + stroke
E1
B + stroke
L
M
H
E1
(3.5)
(3.5)
(5.5)
(5.5)
(5.5)
(5.5)
(6.6)
(9)
(11)
(11)
Cylinders with non-rotating piston rod – DM/99000/N2X (Magnetic)
Ø 20 ... 25 mm
E
L
E1
B + stroke
K
L
K
G
B + stroke
0.20 (5)
2
Reed 2525 mm
Reed
Elect. 1919 mm
Elect.
0.20 (5)
E
2
Section X
M
E
E1
G
Reed 25
Reed
25 mm
Elect. 19
Elect.
19 mm
Ø 12 ... 25 mm
A + stroke
A + stroke
H
Ø 12 ... 16 mm
M
øD
N
O
)
(3
12
0.
øT
øD
E1
0)
(1
O
E1
5
39
0.
N
Section Z
Z
øI
øI
30
°
Ø 40 ... 100 mm
A + stroke
L
0.28 (7)
E1
B + stroke
Reed 25
Reed
Elect. 1925 mm
G
M
Z
0.35 (9)
0.28 (7)
B + stroke
L
G
Z
Q
Elect. 19 mm
K
Q
Section X
Reed 25
Reed
Elect.
19 25 mm
M
Elect. 19 mm
K
A + stroke
E1
Q
H
Ø 32 mm
Q
øI
øI
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
A
1.44
1.54
1.73
1.79
1.93
1.83
1.91
2.13
2.50
2.95
AF
0.34
0.34
0.38
0.43
0.50
0.56
0.75
0.75
0.93
1.13
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
H
#8-32 x 0.21
#8-32 x 0.21
#10-32 x 0.28
1/4-28 x 0.39
5/16-24 x 0.50
3/8-24 x 0.50
1/2-20 x 0.50
1/2-20 x 0.50
5/8-18 x 0.88
3/4-16 x 0.88
(M3 x 0.5-5 deep)
(M4 x 0.7-5 deep)
(M5 x 0.8-7 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M8 x 1.25-12 deep)
(M10 x 1.5-12 deep)
(M10 x 1.5-12 deep)
(M16 x 2.0-22 deep)
(M20 x 2.5-22 deep)
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
ØO
0.26 x 0.14
0.26 x 0.14
0.35 x 0.28
0.35 x 0.28
0.35 x 0.28
0.35 x 0.28
0.43 x 0.31
0.55 x 0.41
0.69 x 0.53
0.69 x 0.53
(6.5 x 3.5)
(6.5 x 3.5)
(9.0 x 7.0)
(9.0 x 7.0)
(9.0 x 7.0)
(9.0 x 7.0)
(11.0 x 8.0)
(14.0 x 10.5)
(17.5 x 13.5)
(17.5 x 13.5)
(36.5)
(39.0)
(44.0)
(45.5)
(49.0)
(46.5)
(48.5)
(54.0)
(63.5)
(75.0)
(8)
(10)
(13)
(17)
(22)
(22)
(27)
(27)
(32)
(46)
B
1.30
1.40
1.56
1.59
1.65
1.56
1.59
1.81
2.11
2.48
ØD
0.236
0.315
0.394
0.472
0.630
0.630
0.787
0.787
0.984
1.181
(33.0)
(35.5)
(39.5)
(40.5)
(42.0)
(39.5)
(40.5)
(46.0)
(53.5)
(63.0)
HM
#8-32 x 0.31
#8-32 x 0.31
#10-32 x 0.31
1/4-28 x 0.37
5/16-24 x 0.50
3/8-24 x 0.63
1/2-20 x 0.77
1/2-20 x .77
5/8-18 x 1.00
3/4-16 x 1.12
P*
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
1/8*
1/4*
1/4*
3/8*
3/8*
…E
1.09
1.25
–
–
–
–
–
–
–
–
(6)
(8)
(10)
(12)
(16)
(16)
(20)
(20)
(25)
(30)
(M5 x 0.8-9 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M10 x 1.25-15 deep)
(M14 x 1.5-20.5 deep)
(M14 x 1.5-20.5 deep)
(M18 x 1.5-26 deep)
(M18 x 1.5-26 deep)
(M22 x 1.5-32.5 deep)
(M26 x 1.5-32.5 deep)
Q
0.28
0.31
0.32
0.33
0.34
0.36
0.41
0.45
0.55
0.71
(7.0)
(7.8)
(8.1)
(8.4)
(8.7)
(9.2)
(10.5)
(11.5)
(14.0)
(18.0)
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
ØI
1.24
1.46
1.85
2.02
2.32
2.72
3.34
4.01
5.11
6.06
ØT
0.591 ±0.002
0.787 ±0.002
0.512 ±0.002
0.591 ±0.002
0.827 ±0.002
1.102 ±0.002
1.378 ±0.002
1.378 ±0.002
1.693 ±0.002
2.323 ±0.003
(31.5)
(37.1)
(47)
(51.3)
(58.9)
(69)
(84.9)
(101.8)
(129.8)
(153.9)
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
3.02
3.85
4.54
E2
0.90
1.07
1.23
1.45
–
–
–
–
–
–
(25)
(29 )
(36)
(40)
(44.5)
(52)
(63.7)
(76.7)
(97.8)
(115.3)
K
0.20
0.24
0.31
0.39
0.55
0.55
0.71
0.71
0.87
1.06
(5.2 )
(6 )
(8 )
(10)
(14 )
(14 )
(18 )
(18 )
(22 )
(27 )
L
0.14
0.14
0.18
0.20
0.28
0.28
0.31
0.31
0.39
0.47
W
–
–
–
–
1.94
2.24
2.78
3.29
4.09
4.8
(15 ±0.043)
(20 ±0.052)
(13 ±0.043)
(15 ±0.043)
(21 ±0.062)
(28 ±0.062)
(35 ±0.062)
(35 ±0.062)
(43 ±0.062)
(59 ±0.074)
(3.5)
(3.5)
(4.5)
(5)
(7 )
(7 )
(8 )
(8 )
(10)
(12 )
(–)
(–)
(–)
(–)
(49.3)
(57.0)
(70.6)
(83.6)
(104)
(121.9)
G
0.059
0.059
0.079
0.079
0.079
0.079
0.079
0.079
0.079
0.079
(23)
(27.2)
(31.2)
(36.9)
(–)
(–)
(–)
(–)
(–)
(–)
LM
0.45
0.45
0.49
0.57
0.78
0.91
1.08
1.08
1.40
1.59
(14)
(15.5)
(18.5)
(22.5)
(28.5)
(28.5)
(33.5)
(33.5)
(43.5)
(43.5)
Z
–
–
–
–
0.84
0.84
1.04
1.04
1.18
1.18
M
0.87
1.10
1.42
1.57
1.34
1.57
1.97
2.36
3.03
3.7
0.395 (10)
°
30
N
O
0.475 (12.1) – Ø 40...100
0.455 (11.6) – Ø 32
N
O
øD
øT
M
W
E1
øT
øD
M
W
E1
Section Z
0.180 (4.6) – Ø 80
0.098 (2.9) – Ø 40
0.12 (3)
(1.5)
(1.5)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(22 )
(28)
(36 )
(40)
(34 )
(40 )
(50)
(60)
(77)
(94 )
ØN
0.14
0.14
0.22
0.22
0.22
0.22
0.26
0.35
0.43
0.43
(3.5)
(3.5)
(5.5)
(5.5)
(5.5)
(5.5)
(6.6 )
(9)
(11)
(11)
(–)
(–)
(–)
(–)
(21.4)
(21.4)
(26.5)
(26.5)
(30.0)
(30.0)
Ø
12
±2°
16
±1°
20
±1°
25
±1°
32
±0.8°
40
±0.8°
50
±0.8°
Brookville, OH USA
63
±0.8°
80
±0.8°
100
±0.8°
Phone 937-833-4033
www.norgren.com
ACT-9-17
Cylinders with non-rotating piston rod – DM/99000/N5X (Non-magnetic)
Ø 12 ... 16 mm
Ø 20 ... 25 mm
E
A + stroke
K
L
L
K
B + stroke
G
5
E
2
G
2
Section X
B + stroke
H
E1
0.20 (5)
M
E
Ø 12 ... 25 mm
A + stroke
E1
øD
øI
)
(3
0.
O
N
N
12
E1
0)
(1
O
øT
øD
5
39
0.
E1
M
Section Z
Z
øI
30
°
Ø 32 mm
Ø 40 ... 100 mm
E1
Z
K
K
G
Q
9 (0.35)
G
P
Q
Section X
L
H
B + stroke
L
M
A + (2 x stroke
)
L + stroke
B + stroke
M
Z
A + stroke
E1
Q
Q
øI
øI
Section Z
N
O
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
A
1.46
1.50
1.69
1.85
2.11
2.13
2.22
2.28
2.80
3.33
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
H
#8-32 x 0.21 (M3 x 0.5-5 deep)
#8-32 x 0.21 (M4 x 0.7-5 deep)
#10-32 x 0.28 (M5 x 0.8-7 deep)
1/4-28 x 0.39 (M6 x 1.0-10 deep)
5/16-24 x 0.50 (M8 x 1.25-12 deep)
3/8-24 x 0.50 (M8 x 1.25-12 deep)
1/2-20 x 0.50 (M10 x 1.5-12 deep)
1/2-20 x 0.50 (M10 x 1.5-12 deep)
5/8-18 x 0.88 (M16 x 2.0-22 deep)
3/4-16 x 0.88 (M20 x 2.5-22 deep)
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
ØO
0.26 x 0.14
0.26 x 0.14
0.35 x 0.28
0.35 x 0.28
0.35 x 0.28
0.35 x 0.28
0.43 x 0.31
0.55 x 0.41
0.69 x 0.53
0.69 x 0.53
AF
0.34
0.34
0.38
0.43
0.50
0.56
0.75
0.75
0.93
1.13
(37.2)
(38.0)
(43.0)
(47.0)
(53.5)
(54.0)
(56.5)
(58.0)
(71.0)
(84.5)
(8)
(10)
(13)
(17)
(22)
(22)
(27)
(27)
(32)
(46)
(6.5 x 3.5)
(6.5 x 3.5)
(9.0 x 7.0)
(9.0 x 7.0)
(9.0 x 7.0)
(9.0 x 7.0)
(11.0 x 8.0)
(14.0 x 10.5)
(17.5 x 13.5)
(17.5 x 13.5)
B
1.19
1.22
1.34
1.46
1.56
1.57
1.59
1.65
2.01
2.38
ØD
0.236
0.315
0.394
0.472
0.630
0.630
0.787
0.787
0.984
1.181
(30.2)
(31.0)
(34.0)
(37.0)
(39.5)
(40.0)
(40.5)
(42.0)
(51.0)
(60.5)
HM
#8-32 x 0.31
#8-32 x 0.31
#10-32 x 0.31
1/4-28 x 0.37
5/16-24 x 0.50
3/8-24 x 0.63
1/2-20 x 0.77
1/2-20 x .77
5/8-18 x 1.00
3/4-16 x 1.12
P*
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
1/8*
1/4*
1/4*
3/8*
3/8*
(6)
(8)
(10)
(12)
(16)
(16)
(20)
(20)
(25)
(30)
…E
1.09
1.25
–
–
–
–
–
–
–
–
(M5 x 0.8-9 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M10 x 1.25-15 deep)
(M14 x 1.5-20.5 deep)
(M14 x 1.5-20.5 deep)
(M18 x 1.5-26 deep)
(M18 x 1.5-26 deep)
(M22 x 1.5-32.5 deep)
(M26 x 1.5-32.5 deep)
Q
0.28
0.31
0.32
0.33
0.34
0.36
0.41
0.45
0.55
0.71
(7.0)
(7.8)
(8.1)
(8.4)
(8.7)
(9.2)
(10.5)
(11.5)
(14.0)
(18.0)
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
ØI
1.24
1.46
1.85
2.02
2.32
2.72
3.34
4.01
5.11
6.06
ØT
0.591 ±0.002
0.787 ±0.002
0.512 ±0.002
0.591 ±0.002
0.827 ±0.002
1.102 ±0.002
1.378 ±0.002
1.378 ±0.002
1.693 ±0.002
2.323 ±0.003
(31.5)
(37.1)
(47)
(51.3)
(58.9)
(69)
(84.9)
(101.8)
(129.8)
(153.9)
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
3.02
3.85
4.54
E2
0.90
1.07
1.23
1.45
–
–
–
–
–
–
(25)
(29)
(36)
(40)
(44.5)
(52)
(63.7)
(76.7)
(97.8)
(115.3)
K
0.20
0.24
0.31
0.39
0.55
0.55
0.71
0.71
0.87
1.06
(5.2)
(6)
(8)
(10)
(14)
(14)
(18)
(18)
(22)
(27)
L
0.14
0.14
0.18
0.20
0.28
0.28
0.31
0.31
0.39
0.47
W
–
–
–
–
1.94
2.24
2.78
3.29
4.09
4.8
(15 ±0.043)
(20 ±0.052)
(13 ±0.043)
(15 ±0.043)
(21 ±0.062)
(28 ±0.062)
(35 ±0.062)
(35 ±0.062)
(43 ±0.062)
(59 ±0.074)
(3.5)
(3.5)
(4.5)
(5)
(7)
(7)
(8)
(8)
(10)
(12)
(–)
(–)
(–)
(–)
(49.3)
(57.0)
(70.6)
(83.6)
(104)
(121.9)
G
0.059
0.059
0.079
0.079
0.079
0.079
0.079
0.079
0.079
0.079
(23)
(27.2)
(31.2)
(36.9)
(–)
(–)
(–)
(–)
(–)
(–)
LM
0.45
0.45
0.49
0.57
0.78
0.91
1.08
1.08
1.40
1.59
(14)
(15.5)
(18.5)
(22.5)
(28.5)
(28.5)
(33.5)
(33.5)
(43.5)
(43.5)
Z
–
–
–
–
0.84
0.84
1.04
1.04
1.18
1.18
M
0.87
1.10
1.42
1.57
1.34
1.57
1.97
2.36
3.03
3.7
(1.5)
(1.5)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(22)
(28)
(36)
(40)
(34)
(40)
(50)
(60)
(77)
(94)
(–)
(–)
(–)
(–)
(21.4)
(21.4)
(26.5)
(26.5)
(30.0)
(30.0)
Ø
ACT-9-18
12
±2°
16
±1°
20
±1°
25
±1°
32
±0.8°
40
±0.8°
50
±0.8°
Brookville, OH USA
63
±0.8°
80
±0.8°
100
±0.8°
Phone 937-833-4033
www.norgren.com
ØN
0.14
0.14
0.22
0.22
0.22
0.22
0.26
0.35
0.43
0.43
(3.5)
(3.5)
(5.5)
(5.5)
(5.5)
(5.5)
(6.6)
(9)
(11)
(11)
0.395 (10)
°
X
N
O
X
30
Z
0.475 (12.1) – Ø 40...100
0.455 (11.6) – Ø 32
øT
øD
W
E1
M
øD
øT
W
E1
M
0.180 (4.6) – Ø 80
0.098 (2.9) – Ø 40
0.12 (3)
Cylinders with non-rotating piston rod – DM/99000/N6X (Magnetic)
Ø 20 ... 25 mm
E
A + stroke
L
E1
K
E1
B + stroke
2
Elect. 19 mm
0.20 (5)
Reed
25 25 mm
Reed
Elect.
Elect.
1919 mm
0.20 (5)
E
2
G
Reed 25
Reed
Elect.
19 25 mm
Section X
B + stroke
L
K
G
M
E
Ø 12 ... 25 mm
A + stroke
H
Ø 12 ... 16 mm
M
)
(3
0.
O
N
12
E1
øT
øD
O
0)
(1
N
5
39
0.
E1
Section Z
Z
øI
øI
30
°
Ø 40 ... 100 mm
A + stroke
B + stroke
L
E1
0.28 (7)
M
Z
K
0.35 (9)
E1
G
M
Reed 2525 mm
Reed
Elect. 1919 mm
Elect.
Z
A + (2 x stroke )
L + stroke
K
Q
G
0.28 (7)
P
Q
B + stroke
Section X
L
Reed 25
Reed 25 mm
Elect. 1919 mm
Elect.
H
Ø 32 mm
Q
Q
øI
øI
Section Z
N
O
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
A
1.75
1.89
2.17
2.24
2.50
2.52
2.62
2.68
3.19
3.72
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
H
#8-32 x 0.21
#8-32 x 0.21
#10-32 x 0.28
1/4-28 x 0.39
5/16-24 x 0.50
3/8-24 x 0.50
1/2-20 x 0.50
1/2-20 x 0.50
5/8-18 x 0.88
3/4-16 x 0.88
(M3 x 0.5-5 deep)
(M4 x 0.7-5 deep)
(M5 x 0.8-7 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M8 x 1.25-12 deep)
(M10 x 1.5-12 deep)
(M10 x 1.5-12 deep)
(M16 x 2.0-22 deep)
(M20 x 2.5-22 deep)
Ø
12
16
20
25
32
40
50
63
80
100
Stroke range
5 ... 30
5 ... 30
5 ... 50
5 ... 50
5. 10 ... 50
5 ... 50
10 ... 50
10 ... 50
10 ... 50
10 ... 50
ØO
0.26 x 0.14
0.26 x 0.14
0.35 x 0.28
0.35 x 0.28
0.35 x 0.28
0.35 x 0.28
0.43 x 0.31
0.55 x 0.41
0.69 x 0.53
0.69 x 0.53
(6.5 x 3.5)
(6.5 x 3.5)
(9.0 x 7.0)
(9.0 x 7.0)
(9.0 x 7.0)
(9.0 x 7.0)
(11.0 x 8.0)
(14.0 x 10.5)
(17.5 x 13.5)
(17.5 x 13.5)
AF
0.34
0.34
0.38
0.43
0.50
0.56
0.75
0.75
0.93
1.13
(44.4)
(48.0)
(55.0)
(57.0)
(63.5)
(64.0)
(66.5)
(68.0)
(81.0)
(94.5)
(8)
(10)
(13)
(17)
(22)
(22)
(27)
(27)
(32)
(46)
B
1.47
1.61
1.81
1.85
1.95
1.97
1.99
2.05
2.40
2.78
ØD
0.236
0.315
0.394
0.472
0.630
0.630
0.787
0.787
0.984
1.181
(37.4)
(41.0)
(46.0)
(47.0)
(49.5)
(50.0)
(50.5)
(52.0)
(61.0)
(70.5)
HM
#8-32 x 0.31
#8-32 x 0.31
#10-32 x 0.31
1/4-28 x 0.37
5/16-24 x 0.50
3/8-24 x 0.63
1/2-20 x 0.77
1/2-20 x .77
5/8-18 x 1.00
3/4-16 x 1.12
P*
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
M5 x 0.8
1/8*
1/4*
1/4*
3/8*
3/8*
(6)
(8)
(10)
(12)
(16)
(16)
(20)
(20)
(25)
(30)
…E
1.09
1.25
–
–
–
–
–
–
–
–
(M5 x 0.8-9 deep)
(M6 x 1.0-10 deep)
(M8 x 1.25-12 deep)
(M10 x 1.25-15 deep)
(M14 x 1.5-20.5 deep)
(M14 x 1.5-20.5 deep)
(M18 x 1.5-26 deep)
(M18 x 1.5-26 deep)
(M22 x 1.5-32.5 deep)
(M26 x 1.5-32.5 deep)
Q
0.28
0.31
0.32
0.33
0.34
0.36
0.41
0.45
0.55
0.71
(7.0)
(7.8)
(8.1)
(8.4)
(8.7)
(9.2)
(10.5)
(11.5)
(14.0)
(18.0)
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
ØI
1.24
1.46
1.85
2.02
2.32
2.72
3.34
4.01
5.11
6.06
ØT
0.591 ±0.002
0.787 ±0.002
0.512 ±0.002
0.591 ±0.002
0.827 ±0.002
1.102 ±0.002
1.378 ±0.002
1.378 ±0.002
1.693 ±0.002
2.323 ±0.003
(31.5)
(37.1)
(47)
(51.3)
(58.9)
(69)
(84.9)
(101.8)
(129.8)
(153.9)
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
3.02
3.85
4.54
E2
0.90
1.07
1.23
1.45
–
–
–
–
–
–
(25)
(29)
(36)
(40)
(44.5)
(52)
(63.7)
(76.7)
(97.8)
(115.3)
K
0.20
0.24
0.31
0.39
0.55
0.55
0.71
0.71
0.87
1.06
(5.2)
(6)
(8)
(10)
(14)
(14)
(18)
(18)
(22)
(27)
L
0.14
0.14
0.18
0.20
0.28
0.28
0.31
0.31
0.39
0.47
W
–
–
–
–
1.94
2.24
2.78
3.29
4.09
4.8
(15 ±0.043)
(20 ±0.052)
(13 ±0.043)
(15 ±0.043)
(21 ±0.062)
(28 ±0.062)
(35 ±0.062)
(35 ±0.062)
(43 ±0.062)
(59 ±0.074)
(3.5)
(3.5)
(4.5)
(5)
(7)
(7)
(8)
(8)
(10)
(12)
(–)
(–)
(–)
(–)
(49.3)
(57.0)
(70.6)
(83.6)
(104)
(121.9)
G
0.059
0.059
0.079
0.079
0.079
0.079
0.079
0.079
0.079
0.079
(23)
(27.2)
(31.2)
(36.9)
(–)
(–)
(–)
(–)
(–)
(–)
LM
0.45
0.45
0.49
0.57
0.78
0.91
1.08
1.08
1.40
1.59
(14)
(15.5)
(18.5)
(22.5)
(28.5)
(28.5)
(33.5)
(33.5)
(43.5)
(43.5)
Z
–
–
–
–
0.84
0.84
1.04
1.04
1.18
1.18
M
0.87
1.10
1.42
1.57
1.34
1.57
1.97
2.36
3.03
3.7
0.395 (10)
°
X
N
O
X
30
Z
0.475 (12.1) – Ø 40...100
0.455 (11.6) – Ø 32
øT
øD
W
E1
M
øT
W
E1
M
0.180 (4.6) – Ø 80
0.098 (2.9) – Ø 40
0.12 (3)
(1.5)
(1.5)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(22)
(28)
(36)
(40)
(34)
(40)
(50)
(60)
(77)
(94)
ØN
0.14
0.14
0.22
0.22
0.22
0.22
0.26
0.35
0.43
0.43
(3.5)
(3.5)
(5.5)
(5.5)
(5.5)
(5.5)
(6.6)
(9)
(11)
(11)
(–)
(–)
(–)
(–)
(21.4)
(21.4)
(26.5)
(26.5)
(30.0)
(30.0)
Ø
12
±2°
16
±1°
20
±1°
25
±1°
32
±0.8°
40
±0.8°
50
±0.8°
Brookville, OH USA
63
±0.8°
80
±0.8°
100
±0.8°
Phone 937-833-4033
www.norgren.com
ACT-9-19
Guided toolplate – DM/99000/N3 (Non-magnetic)
Ø 12 ... 25 mm
Ø 32 ... 160 mm
C
F
T
B
Q
L
P
F
C
FF
J
U
S
U
F
Q
Q
C
FF
B
Q
J
E
2
M
L
øI
G
T
FF
S
P
Y
FF
Y
F
C
Guided toolplate – DM/99000/N4 (Magnetic)
Ø 12 ... 25 mm
Ø 32 ... 160 mm
T
T
L
B
0.
28
L
B
P
F
Reed 25
Reed 25 mm
Elect.
19 19 mm
Elect.
2
P
0.28 (7)
FF
C
F
J
U
S
U
Q
Q
C
F
FF
Q
J
E
G
Elect. 19 mm
FF
M
øI
Q
Reed 25
Reed 25 mm
Elect. 19
S
(7
)
C
Y
FF
Y
F
C
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
Stroke range
5 ... 100
5 ... 100
5 ... 100
5 ... 100
5 ... 150
5 ... 150
5 ... 150
5 ... 150
5 ... 150
5 ... 150
5 ... 300
5 ... 300
5 ... 300
C
0.94
1.10
1.38
1.54
1.71
2.00
2.47
2.98
3.81
4.50
5.55
6.18
6.91
(24)
(28)
(35)
(40)
(43.4)
(50.5)
(62.7)
(75.7)
(96.9)
(114.4)
(141)
(157)
(175.5)
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
3.02
3.85
4.54
5.59
6.22
7.01
(25)
(29 )
(36)
(40)
(44.5)
(52)
(63.7)
(76.7)
(97.8)
(115.3)
(142)
(158)
(178)
E2
0.90
1.07
1.23
1.45
–
–
–
–
–
–
–
–
–
(23)
(27.2)
(31.2)
(36.9)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
F
0.63
0.81
1.06
1.13
1.19
1.38
1.75
2.00
2.75
3.25
3.74
4.00
4.74
(16)
(20)
(27)
(28.5)
(30)
(35)
(45.5)
(50.5)
(70)
(82.5)
(95)
(101.5)
(120.5)
FF
–
0.44
0.57
0.66
0.84
0.97
1.24
1.41
1.95
2.30
2.65
2.83
3.35
(–)
(11)
(14.5)
(16.6)
(21.2)
(24.7)
(32.2)
(35.7)
(49.5)
(58.3)
(67.2)
(71.8)
(85.2)
G
0.82
0.98
1.00
1.18
1.44
1.78
2.25
2.69
3.50
4.45
5.30
6.08
6.85
(20.8)
(25)
(25.4)
(30)
(36.7)
(45.1)
(57.1)
(68.3)
(88.9)
(112.9)
(134.7)
(154.5)
(174.1)
ØI
1.24
1.46
1.85
2.02
2.32
2.72
3.34
4.01
5.11
6.06
7.48
8.27
9.37
Ø
Stroke range
N
O
P
Q
S
T
12
5 ... 100
–
(–)
–
(–)
M5 x 0.8 0.28 (7)
–
(–)
0.24 (6.1)
16
5 ... 100
–
(–)
0.26 x 14 (6.5 x 3.5 deep)
M5 x 0.8 0.31 (7.8)
0.14 (3.3)
0.24 (6.1)
20
5 ... 100
–
(–)
0.35 x 0.28 (9.0 x 7.0 deep)
M5 x 0.8 0.32 (8.1)
0.17 (4.2)
0.27 (6.9)
25
5 ... 100
–
(–)
0.35 x 0.28 (9.0 x 7.0 deep)
M5 x 0.8 0.33 (8.4)
0.17 (4.2)
0.33 (8.3)
32
5 ... 150
0.22 (5.5)
0.35 x 0.28 (9.0 x 7.0 deep)
1/8*‡
0.34 (8.7)
0.20 (5.2)
0.33 (8.3)
40
5 ... 150
0.22 (5.5)
0.35 x 0.28 (9.0 x 7.0 deep)
1/8*
0.36 (9.2)
0.26 (6.1)
0.33 (8.3)
50
5 ... 150
0.26 (6.6)
0.43 x 0.31 (11.0 x 8.0 deep)
1/4*
0.41 (10.5) 0.33 (8.2)
0.48 (12.1)
63
5 ... 150
0.35 (9)
0.55 x 0.41 (14.0 x 10.5 deep)
1/4*
0.45 (11.5) 0.45 (11.5) 0.49 (12.5)
80
5 ... 150
0.43 (11)
0.69 x 0.53 (17.5 x 13.5 deep)
3/8*
0.55 (14)
0.52 (12.3) 0.55 (14)
100 5 ... 150
0.43 (11)
0.69 x 0.53 (17.5 x 13.5 deep)
3/8*
0.71 (18)
0.52 (12.3) 0.55 (14)
125 5 ... 300
0.50 (12.7)
0.83 x 0.72 (21.2 x 18.4 deep)
3/8*
0.96 (24.5) *
(14.3) 0.83 (21)
140 5 ... 300
0.50 (12.7)
0.83 x 0.72 (21.2 x 18.4 deep)
3/8*
0.96 (24.5) *
(14.3) 0.83 (21)
160 5 ... 300
0.57 (14.5)
0.95 x 0.83 (24.2 x 21.2 deep)
3/8*
1.08 (27.5) *
(16.7) 0.83 (21)
(31.5)
(37.1)
(47)
(51.3)
(58.9)
(69)
(84.9)
(101.8)
(129.8)
(153.9)
(190)
(210)
(238)
U
–
–
0.28
–
–
–
0.49
0.68
0.77
0.77
–
–
–
J
6-32
6-32
8-32
8-32
10-24
1/4-20
5/16-18
7/16-14
1/2-13
1/2-13
*
*
*
(–)
(–)
(7)
(–)
(–)
(–)
(13.5)
(16.5)
(18.5)
(18.5)
(–)
(–)
(–)
(M3 x 0.5)
(M4 x 0.7)
(M6 x 1.0)
(M6 x 1.0)
(M5 x 0.8)
(M6 x 1.0)
(M8 x 1.25)
(M10 x 1.5)
(M12 x 1.75)
(M12 x 1.75)
(M14 x 2.0)
(M14 x 2.0)
(M16 x 2.0)
W
–
–
–
–
1.94
2.24
2.78
3.29
4.09
4.80
6.02
6.61
7.40
(–)
(–)
(–)
(–)
(49.3)
(57)
(70.6)
(83.6)
(104)
(121.9)
(153)
(168)
(188)
L
0.14
0.14
0.18
0.20
0.28
0.28
0.31
0.31
0.39
0.47
0.63
0.63
0.67
(3.5)
(3.5)
(4.5)
(5)
(7)
(7)
(8)
(8)
(10)
(12)
(16)
(16)
(17)
M
0.87
1.10
1.42
1.57
1.34
1.57
1.97
2.36
3.03
3.70
4.49
5.04
5.67
(22)
(28)
(36)
(40)
(34)
(40)
(50)
(60)
(77)
(94)
(114)
(128)
(144)
Y
–
–
0.06
–
–
–
0.10
0.18
0.18
0.13
–
–
–
(–)
(–)
(1.5)
(–)
(–)
(–)
(2.5)
(3.3)
(3.8)
(3.2)
(–)
(–)
(–)
Z
–
–
–
–
0.84
0.84
1.04
1.04
1.18
1.18
1.53
1.53
1.53
(–)
(–)
(–)
(–)
(21.4)
(21.4)
(26.5)
(26.5)
(30)
(30)
(39)
(39)
(39)
‡ Note: On 32 bore, 5 mm stroke, non-magnetic model only, port thread is M5 x 0.8 which will accept #10-32 male thread fittings.
Please see next page for ‘B’ and 'Q' dimensions.
ACT-9-20
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
Q
Stroke (mm)
5 ... 45
5 ... 100
0.28 (7)
–
(–)
0.31 (8)
–
(–)
0.32 (8)
–
(–)
0.33 (8.5) –
(–)
–
(–)
0.34 (9)
–
(–)
0.36 (9)
–
(–)
0.41 (10.5)
–
(–)
0.45 (11.5)
–
(–)
0.55 (14)
–
(–)
0.71 (18)
–
(–)
0.96 (24.5)
–
(–)
0.96 (24.5)
–
(–)
1.08 (27.5)
50
0.35
0.40
0.32
0.33
–
–
–
–
–
–
–
–
–
(9)
(10)
(8)
(8.5)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
75
0.35
0.40
0.48
0.50
–
–
–
–
–
–
–
–
–
(9)
(10)
(12)
(12.5)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
100
0.35
0.40
0.48
0.50
–
–
–
–
–
–
–
–
–
(9)
(10)
(12)
(12.5)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
125, 150
–
(–)
–
(–)
–
(–)
–
(–)
0.50 (12.5)
0.50 (12.5)
0.52 (13)
0.73 (18.5)
0.55 (14)
0.71 (18)
0.96 (24.5)
0.96 (24.5)
1.08 (27.5)
(53)
(55.5)
(56.5)
(57.5)
(48)
(54.5)
(55.5)
(61)
(68.5)
(78)
–
–
–
30
2.28
2.38
2.42
2.46
2.09
2.34
2.38
2.60
2.89
3.27
4.45
4.45
4.76
(58)
(60.5)
(61.5)
(62.5)
(53)
(59.5)
(60.5)
(66)
(73.5)
(83)
(113)
(113)
(121)
(53)
(55.5)
(56.5)
(57.5)
(58)
(64.5)
(65.5)
(71)
(78.5)
(88)
(–)
(–)
(–)
30
2.28
2.38
2.42
2.46
2.48
2.74
2.78
2.99
3.29
3.66
4.45
4.45
4.76
(58)
(60.5)
(61.5)
(62.5)
(63)
(69.5)
(70.5)
(76)
(83.5)
(93)
(113)
(113)
(121)
175 ... 300
–
(–)
–
(–)
–
(–)
–
(–)
–
(–)
–
(–)
–
(–)
–
(–)
–
(–)
–
(–)
0.96 (24.5)
0.96 (24.5)
1.08 (27.5)
Non-magnetic piston
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
B
Stroke (mm)
5
10
1.30 (33)
1.50
1.40 (35.5) 1.59
1.44 (36.5) 1.63
1.48 (37.5) 1.67
1.10 (28)
1.30
1.36 (34.5) 1.56
–
–
1.59
–
–
1.81
–
–
2.11
–
–
2.48
–
–
3.66
–
–
3.66
–
–
3.98
(38)
(40.5)
(41.5)
(42.5)
(33)
(39.5)
(40.5)
(46)
(53.5)
(63)
(93)
(93)
(101)
15
1.69
1.79
1.83
1.87
1.50
1.75
1.79
2.01
2.30
2.68
(43)
(45.5)
(46.5)
(47.5)
(38)
(44.5)
(45.5)
(51)
(58.5)
(68)
–
–
–
20
1.89
1.99
2.03
2.07
1.69
1.95
1.99
2.20
2.50
2.87
4.06
4.06
4.37
(48)
(50.5)
(51.5)
(52.5)
(43)
(49.5)
(50.5)
(56)
(63.5)
(73)
(103)
(103)
(111)
(43)
(45.5)
(46.5)
(47.5)
(48)
(54.5)
(55.5)
(61)
(68.5)
(78)
(–)
(–)
(–)
20
1.89
1.99
2.03
2.07
2.09
2.34
2.38
2.60
2.89
3.27
4.06
4.06
4.37
(48)
(50.5)
(51.5)
(52.5)
(53)
(59.5)
(60.5)
(66)
(73.5)
(83)
(103)
(103)
(111)
25
2.07
2.19
2.22
2.26
1.89
2.15
2.19
2.40
2.70
3.07
35
–
–
–
–
2.28
2.54
2.58
2.80
3.09
3.46
(–)
(–)
(–)
(–)
(58)
(64.5)
(65.5)
(71)
(78.5)
(88)
–
–
–
40
–
–
–
–
2.48
2.74
2.78
2.99
3.29
3.66
4.84
4.84
5.16
(–)
(–)
(–)
(–)
(63)
(69.5)
(70.5)
(76)
(83.5)
(93)
(123)
(123)
(131)
(–)
(–)
(–)
(–)
(68)
(74.5)
(75.5)
(81)
(88.5)
(98)
(–)
(–)
(–)
40
–
–
–
–
2.87
3.13
3.17
3.39
3.68
4.06
4.84
4.84
5.16
(–)
(–)
(–)
(–)
(73)
(79.5)
(80.5)
(86)
(93.5)
(103)
(123)
(123)
(131)
45
–
–
–
–
2.68
2.93
2.97
3.19
3.48
3.86
(–)
(–)
(–)
(–)
(68)
(74.5)
(75.5)
(81)
(88.5)
(98)
–
–
–
50
3.30
3.39
3.21
3.25
2.87
3.13
3.17
3.39
3.68
4.06
5.24
5.24
5.55
(–)
(–)
(–)
(–)
(78)
(84.5)
(85.5)
(91)
(98.5)
(108)
–
–
–
50
3.30 (84)
3.39 (86)
3.21 (81.5)
3.25 (82.5)
3.27 (83)
3.52 (89.5)
3.56 (90.5)
3.78 (96)
4.07 (103.5)
4.45 (113)
(5.24 (133)
5.24 (133)
5.55 (141)
(84)
(86)
(81.5)
(82.5)
(73)
(79.5)
(80.5)
(86)
(93.5)
(103)
(133)
(133)
(141)
75
4.28
4.38
4.59
4.82
4.25
4.51
4.55
4.76
5.06
5.43
6.22
6.22
6.54
(109)
(111)
(116.5)
(122.5)
(108)
(114.5)
(115.5)
(121)
(128.5)
(138)
(158)
(158)
(166)
100
5.27
5.36
5.57
5.81
5.24
5.49
5.53
5.75
6.04
6.42
7.20
7.20
7.52
(134)
(136)
(141.5)
(147.5)
(133)
(139.5)
(140.5)
(146)
(153.5)
(163)
(183)
(183)
(191)
125
–
–
–
–
6.80
7.11
7.26
7.46
7.66
7.94
8.19
8.19
8.50
(–)
(–)
(–)
(–)
(173)
(180.5)
(184.5)
(189.5)
(194.5)
(202)
(208)
(208)
(216)
150
–
–
–
–
7.79
8.09
8.24
8.49
8.64
8.93
9.17
9.17
9.49
(–)
(–)
(–)
(–)
(198)
(205.5)
(209.5)
(214.5)
(219.5)
(227)
(233)
(233)
(241)
75
4.28
4.38
4.59
4.82
4.25
4.51
4.55
4.76
5.06
5.43
6.22
6.22
6.54
(109)
(111)
(116.5)
(122.5)
(108)
(114.5)
(115.5)
(121)
(128.5)
(138)
(158)
(158)
(166)
100
5.27
5.36
5.57
5.81
5.24
5.49
5.53
5.75
6.04
6.42
7.20
7.20
7.52
(134)
(136)
(141.5)
(147.5)
(133)
(139.5)
(140.5)
(146)
(153.5)
(163)
(183)
(183)
(191)
125
–
–
–
–
6.80
7.11
7.26
7.46
7.66
7.94
8.19
8.19
8.50
(–)
(–)
(–)
(–)
(173)
(180.5)
(184.5)
(189.5)
(194.5)
(201.5)
(208)
(208)
(216)
150
–
–
–
–
7.79
8.09
8.24
8.49
8.64
8.93
9.17
9.17
9.49
(–)
(–)
(–)
(–)
(198)
(205.5)
(209.5)
(214.5)
(219.5)
(226.5)
(233)
(233)
(241)
Magnetic piston
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
B
Stroke (mm)
5
10
1.30 (33)
1.50
1.40 (35.5) 1.59
1.44 (36.5) 1.63
1.48 (37.5) 1.67
1.50 (38)
1.69
1.75 (44.5) 1.95
–
(–)
1.99
–
(–)
2.20
–
(–)
2.50
–
(–)
2.87
–
(–)
3.66
–
(–)
3.66
–
(–)
3.98
(38)
(40.5)
(41.5)
(42.5)
(43)
(49.5)
(50.5)
(56)
(63.5)
(73)
(93)
(93)
(101)
15
1.69
1.79
1.83
1.87
1.89
2.15
2.19
2.40
2.70
3.07
–
–
–
25
2.07
2.19
2.22
2.26
2.28
2.54
2.58
2.80
3.09
3.46
–
–
–
35
–
–
–
–
2.68
2.93
2.97
3.19
3.48
3.86
–
–
–
45
–
–
–
–
3.07
3.33
3.37
3.58
3.88
4.25
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-9-21
Maximum allowable load at toolplate
Ø
Stroke (mm)
5
10
12
16
20
25
32
40
50
63
80
100
125
140
160
7.8
11.0
17.0
18.0
24.0
26.0
–
–
–
–
–
–
–
6.0
9.0
16.0
16.5
20.0
22.0
34.5
56.0
85.0
92.5
99.0
107.0
168.0
Ø
Stroke (mm)
50
75
12
16
20
25
32
40
50
63
80
100
125
140
160
1.1
1.7
4.6
4.8
6.7
7.1
13.0
18.5
33.0
35.0
37.0
44.0
72.0
0.9
1.4
2.7
2.9
5.4
5.8
10.6
14.6
26.6
29.0
31.0
42.0
69.0
(3.54)
(4.99)
(7.72)
(8.17)
(10.90)
(11.80)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(0.50)
(0.77)
(2.09)
(2.18)
(3.04)
(3.22)
(5.90)
(8.40)
(14.98)
(15.89)
(16.80)
(19.98)
(32.69)
15
(2.72)
(4.09)
(7.26)
(7.49)
(9.08)
(9.99)
(15.66)
(25.42)
(38.59)
(42.00)
(44.95)
(48.58)
(76.27)
3.0
4.7
11.0
12.0
15.5
17.0
31.0
50.0
78.9
85
–
–
–
20
(1.36)
(2.13)
(4.99)
(5.45)
(7.04)
(7.72)
(14.07)
(22.70)
(35.82)
(38.59)
(–)
(–)
(–)
100
(0.41)
(0.64)
(1.23)
(1.32)
(2.45)
(2.63)
(4.81)
(6.63)
(12.08)
(13.17)
(14.07)
(19.07)
(31.33)
0.7
0.9
1.7
1.9
4.2
4.6
9.1
12.1
22.6
24.6
26.0
35.0
57.0
2.5
4.1
9.0
10.5
13.5
14.2
28.0
46.5
73.0
79.0
85.0
93.0
146.0
25
(1.14)
(1.86)
(4.09)
(4.77)
(6.13)
(6.45)
(12.71)
(21.11)
(33.14)
(35.87)
(38.59)
(42.22)
(66.28)
125
(0.32)
(0.41)
(0.77)
(0.86)
(1.91)
(2.90)
(4.13)
(5.49)
(10.26)
(11.17)
(11.80)
(15.89)
(25.89)
–
–
–
–
1.6
1.9
3.0
4.5
8.4
9.1
12.0
16.0
26.0
2.1
3.4
7.0
9.0
11.0
11.7
25.0
38.0
68.0
74.0
–
–
–
30
(0.95)
(1.54)
(3.18)
(4.09)
(4.99)
(5.31)
(11.35)
(17.25)
(30.87)
(33.60)
(–)
(–)
(–)
150
(–)
(–)
(–)
(–)
(0.73)
(0.86)
(1.36)
(2.04)
(3.81)
(4.13)
(5.45)
(7.26)
(11.80)
–
–
–
–
0.9
1.2
2.3
3.1
5.8
6.3
9.5
13.0
21.0
1.90
2.90
6.20
7.50
10.0
10.6
23.0
33.0
63.0
69.0
75.0
81.0
127.0
35
(0.86)
(1.32)
(2.81)
(3.41)
(4.54)
(4.81)
(10.44)
(14.98)
(28.60)
(31.33)
(34.05)
(36.77)
(57.66)
175
(–)
(–)
(–)
(–)
(0.41)
(0.54)
(1.04)
(1.41)
(2.63)
(2.86)
(4.31)
(5.90)
(9.53)
–
–
–
–
–
–
–
–
–
–
7.3
9.5
15.3
–
–
5.7
6.0
8.0
8.6
22.0
29.0
59.0
65.0
–
–
–
40
(–)
(–)
(2.59)
(2.72)
(3.63)
(3.90)
(9.99)
(13.17)
(26.79)
(29.51)
(–)
(–)
(–)
200
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(3.31)
(4.31)
(6.95)
–
–
–
–
–
–
–
–
–
–
5.5
7.6
12.2
–
–
5.2
5.5
7.5
8.1
19.0
23.0
45.0
49.0
53.0
57.0
93.0
45
(–)
(–)
(2.36)
(2.50)
(3.41)
(3.68)
(8.63)
(10.44)
(20.43)
(22.25)
(24.06)
(25.88)
(42.22))
250
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(2.50)
(3.45)
(5.54)
–
–
–
–
–
–
–
–
–
–
3.7
5.8
11.3
Ø 12 ... 25 mm
Ø 12 ... 25 mm
øT
øT
Boss, rod end – DM/99000/EX
G
G
Ø 32 ... 160 mm
øT
øT
Ø 32 ... 160 mm
G
Ø
12
16
20
25
32
40
50
63
80
100
ØT
0.591 ±0.002
0.787 ±0.002
0.512 ±0.002
0.591 ±0.002
0.827 ±0.002
1.102 ±0.002
1.378 ±0.002
1.378 ±0.002
1.693 ±0.002
2.323 ±0.003
G
(15 ±0.043)
(20 ±0.052)
(13 ±0.043)
(15 ±0.043)
(21 ±0.062)
(28 ±0.062)
(35 ±0.062)
(35 ±0.062)
(43 ±0.062)
(59 ±0.074)
G
0.059
0.059
0.079
0.079
0.079
0.079
0.079
0.079
0.079
0.079
(1.5)
(1.5)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
(2.0)
ACT-9-22
Brookville, OH USA
Phone 937-833-4033
(–)
(–)
(2.27)
(2.36)
(3.27)
(3.54)
(7.26)
(8.85)
(16.80)
(17.71)
(–)
(–)
(–)
300
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(1.68)
(2.63)
(5.13)
Figures in lbs (kg)
Boss, cap end – DM/99000/FX
–
–
5.0
5.2
7.2
7.8
16.0
19.5
37.0
39.0
–
–
–
www.norgren.com
–
–
–
–
–
–
–
–
–
–
2.7
4.5
10.1
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(1.23)
(2.04)
(4.59)
Mountings
Tapped hole mounting both ends – A
For single and double ended piston rod
O
#8-32
#8-32
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
7/16-14
1/2-13
1/2-13
–
–
–
(M4 x 0.7)
(M4 x 0.7)
(M6 x 1.0)
(M6 x 1.0)
(M6 x 1.0)
(M6 x 1.0)
(M8 x 1.25)
(M10 x 1.5)
(M12 x 1.75)
(M12 x 1.75)
(M14 x 2.0)
(M14 x 2.0)
(M16 x 2.0)
R
0.43
0.43
0.67
0.67
0.67
0.75
0.75
0.87
1.13
1.13
–
–
–
(11)
(11)
(17)
(17)
(17)
(19)
(19)
(22)
(29)
(29)
(45)
(45)
(50)
For cylinders with toolplate
Ø 12 .... 25 mm
(M4 x 0.7)
(M4 x 0.7)
(M6 x 1.0)
(M6 x 1.0)
(M6 x 1.0)
(M6 x 1.0)
(M8 x 1.25)
(M10 x 1.5)
(M12 x 1.75)
(M12 x 1.75)
(M14 x 2.0)
(M14 x 2.0)
(M16 x 2.0)
O
12
16
16
25
32
40
50
63
80
100
#8-32
#8-32
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
7/16-14
1/2-13
1/2-13
(M4 x 0.7)
(M4 x 0.7)
(M6 x 1.0)
(M6 x 1.0)
(M6 x 1.0)
(M6 x 1.0)
(M8 x 1.25)
(M10 x 1.5)
(M12 x 1.75)
(M12 x 1.75)
Places front
RF
2
2
2
2
2
4
4
4
4
4
0.63
0.63
0.98
0.98
1.02
0.75
0.75
0.87
1.13
1.13
(16)
(16)
(25)
(25)
(26)
(19)
(19)
(22)
(29)
(29)
Places rear
RR
2
2
2
2
4
4
4
4
4
4
0.43
0.43
0.67
0.67
0.67
0.75
0.75
0.87
1.13
1.13
(11)
(11)
(17)
(17)
(17)
(19)
(19)
(22)
(29)
(29)
Ø 32 .... 100 mm
RT
RT
OT
#8-32
#8-32
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
7/16-14
1/2-13
1/2-13
–
–
–
Ø
RR
Ø
12
16
20
25
32
40
50
63
80
100
125
140
160
RF
O
R
O
Ø
12
16
16
25
32
40
50
63
80
100
125
140
160
For cylinders with non-rotating piston rod
RT
0.38
0.51
0.53
0.59
0.67
0.75
0.75
0.87
1.13
1.13
–
–
–
(9.7)
(13)
(13.5)
(15)
(17)
(19)
(19)
(22)
(29)
(29)
(40)
(40)
(45.2)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-9-23
Rear clevis mounting – D
Ø 12 ... 25 mm
Ø 32 ... 100 mm
LT
LT
LG
CX
CN
CN
CZ
CU
CW
E
Ø
12
16
20
25
32
40
50
63
80
100
CN
0.187
0.187
0.312
0.375
0.375
0.375
0.5
0.5
0.75
0.875
CW
0.55
0.59
0.71
0.79
0.79
0.87
1.1
1.18
1.5
1.77
(5)
(5)
(8)
(10)
(10)
(10)
(14)
(14)
(18)
(22)
CU
0.28
0.39
0.47
0.55
0.55
0.55
0.79
0.79
1.07
1.22
(14)
(15)
(18)
(20)
(20)
(22)
(28)
(30)
(38)
(45)
CX
CU
E1
RR
CW
E1
E1
LG
CX
0.21
0.27
0.33
0.41
0.72
0.72
0.88
0.88
1.11
1.27
(7)
(10)
(12)
(14)
(14)
(14)
(20)
(20)
(27)
(31)
CZ
0.39
0.47
0.63
0.79
1.42
1.42
1.73
1.73
2.2
2.52
(5.3)
(6.8)
(8.3)
(10.3)
(18.3)
(18.3)
(22.3)
(22.3)
(28.3)
(32.3)
(10)
(12)
(16)
(20)
(36)
(36)
(44)
(44)
(56)
(64)
LT
0.2
0.2
0.2
0.2
0.24
0.31
0.31
0.39
0.43
0.55
(5)
(5)
(5)
(5)
(6)
(8)
(8)
(10)
(11)
(14)
LG
0.11
0.11
0.16
0.16
0.16
0.16
0.2
0.24
0.28
0.28
CZ
E1
RR
RR
0.24
0.24
0.35
0.39
0.39
0.39
0.55
0.55
0.71
0.87
(2.8)
(2.8)
(4.0)
(4.0)
(4.0)
(4.0)
(5.0)
(6.0)
(7.0)
(7.0)
(6.0)
(6.0)
(9.0)
(10)
(10)
(10)
(14)
(14)
(18)
(22)
E1
0.98
1.14
1.42
1.57
1.75
2.05
2.51
3.02
3.85
4.54
(25)
(29)
(36)
(40)
(44.5)
(52)
(63.7)
(76.7)
(97.8)
(115.3)
…E
1.09
1.25
–
–
–
–
–
–
–
–
lb (kg)
0.05
0.05
0.10
0.15
0.20
0.29
0.46
0.75
1.19
1.98
(27.7)
(31.7)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(–)
(0.02)
(0.02)
(0.05)
(0.07)
(0.09)
(0.13)
(0.22)
(0.34)
(0.54)
(0.90)
Foot mounting – C
Ø 12 ... 25 mm
Ø 32 ... 100 mm
LG
LD
L
Y
X
LD
LX
LD
0.18
0.18
0.26
0.26
0.26
0.26
0.35
0.43
0.51
0.51
(4.5)
(4.5)
(6.5)
(6.5)
(6.5)
(6.5)
(9)
(11)
(13)
(13)
L
Y
LZ
LH
0.67
0.75
0.94
1.02
1.18
1.30
1.54
1.81
2.32
2.80
(17)
(19)
(24)
(26)
(30)
(33)
(39)
(46)
(59)
(71)
LX
1.39
1.50
1.89
2.05
2.24
2.52
3.11
3.74
4.65
5.39
(34)
(38)
(48)
(52)
(57)
(64)
(79)
(95)
(118)
(137)
LY
1.16
1.32
1.65
1.81
2.24
2.52
3.07
3.6
4.49
5.35
(29.5)
(33.5)
(42)
(46)
(57)
(64)
(78)
(91.5)
(114)
(136)
LZ
1.73
1.89
2.44
2.60
2.80
3.07
3.74
4.45
5.51
6.38
(44)
(48)
(62)
(66)
(71)
(78)
(95)
(113)
(140)
(162)
L
0.53
0.53
0.57
0.59
0.67
0.67
0.71
0.71
0.79
0.87
(13.5)
(13.5)
(14.5)
(15)
(17)
(17)
(18)
(18)
(20)
(22)
LT
0.08
0.08
0.13
0.13
0.13
0.13
0.13
0.13
0.18
0.24
(2)
(2)
(3.2)
(3.2)
(3.2)
(3.2)
(3.2)
(3.2)
(4.5)
(6)
X
0.31
0.31
0.36
0.42
0.44
0.44
0.58
0.64
0.77
0.91
(8)
(8)
(9.2)
(10.7)
(11.2)
(11.2)
(14.7)
(16.2)
(19.5)
(23)
Y
0.18
0.20
0.23
0.23
0.23
0.28
0.31
0.35
0.43
0.49
(4.5)
(5)
(5.8)
(5.8)
(5.8)
(7)
(8)
(9)
(11)
(12.5)
LG
0.11
0.11
0.16
0.16
0.16
0.16
0.20
0.24
0.28
0.28
ACT-9-24
X
LX
LZ
Ø
12
16
20
25
32
40
50
63
80
100
LT
LH
LT
LH
LY
LY
LG
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
(2.8)
(2.8)
(4)
(4)
(4)
(4)
(5)
(6)
(7)
(7)
lb (kg)
0.04 (0.02)
0.04 (0.02)
0.04 (0.02)
0.09 (0.04)
0.09 (0.04)
0.22 (0.10)
0.24 (0.11)
0.29 (0.13)
0.40 (0.18)
1.06 (0.47)
Flange rod end mounting – G
Flange cap end mounting – B
ISO Flange rod end mounting – IG
ISO Flange cap end mounting – IB
L FT
FX
FY
FV
FV
Ø 32 ... 100 mm
FD
Ø 12 ... 25 mm
FT
FD
FZ
FT
L FT
FX
FZ
ISO
Ø
FT
L
12 0.22 (5.5) 0.31 (8)
16 0.22 (5.5) 0.31 (8)
20 0.31 (8) 0.26 (6.5)
25 0.31 (8) 0.28 (7)
32 0.31 (8) 0.35 (9)
40 0.31 (8) 0.35 (9)
50 0.35 (9) 0.35 (9)
63 0.35 (9) 0.35 (9)
80 0.43 (11) 0.35 (9)
100 0.43 (11) 0.43 (11)
Non-ISO
FD
0.22
0.22
0.26
0.26
0.28
0.35
0.35
0.35
0.47
0.55
(5.5)
(5.5)
(6.5)
(6.5)
(7)
(9)
(9)
(9)
(12)
(14)
FY
–
–
–
–
1.26
1.42
1.77
1.97
2.48
2.95
(–)
(–)
(–)
(–)
(32)
(36)
(45)
(50)
(63)
(75)
FX
1.57
1.57
1.97
1.97
2.52
2.83
3.54
3.94
4.96
5.91
(40)
(40)
(50)
(50)
(64)
(72)
(90)
(100)
(126)
(150)
FV
0.98
1.18
1.54
1.65
1.89
2.13
2.64
3.15
3.9
4.61
(25)
(30)
(39)
(42)
(48)
(54)
(67)
(80)
(99)
(117)
FZ
1.97
1.97
2.44
2.44
2.99
3.47
4.17
4.57
5.91
7.01
Brookville, OH USA
FD
(50)
(50)
(62)
(62)
(76)
(88)
(106)
(116)
(150)
(178)
0.18
0.18 (4.5)
0.26 (6.5)
0.26 (6.5)
0.22 (5.5)
0.22 (5.5)
0.26 (6.5)
0.35 (9)
0.43 (11)
0.43 (11)
FY
(4.5) –
–
(–)
–
(–)
–
(–)
1.34 (34)
1.57 (40)
1.97 (50)
2.36 (60)
3.03 (77)
3.7 (94)
Phone 937-833-4033
FX
(–)
1.77
1.89
2.05
2.2
2.44
2.99
3.62
4.57
5.35
1.77
(45)
(48)
(52)
(56)
(62)
(76)
(92)
(116)
(136)
FV
(45)
1.18
1.54
1.65
1.89
2.13
2.64
3.15
3.9
4.61
0.98
(30)
(39)
(42)
(48)
(54)
(67)
(80)
(99)
(117)
FZ
(25)
2.17
2.36
2.52
2.56
2.83
3.5
4.25
5.28
6.06
2.17
(55)
(60)
(64)
(65)
(72)
(89)
(108)
(134)
(154)
www.norgren.com
lb (kg)
(55) 0.04
0.04 (0.02)
0.04 (0.02)
0.09 (0.04)
0.13 (0.06)
0.33 (0.15)
0.37 (0.16)
0.73 (0.32)
0.90 (0.40)
1.58 (0.70)
(0.02)
ACT-9-25
Accessories
Piston rod clevis
Ø 12 ... 25 mm
Ø 32 ... 100 mm
P
A
P
Z
A
Z
L
L
X
U
U
X
CN
M
M
E
CN
Ø
Model
Inch
12 QC/99012/25
16 QC/99016/25
20 QC/99020/25
25 QC/99025/25
32 QC/99032/25
40 QC/99040/25
50 QC/99050/25
63 QC/99050/25
80 QC/99080/25
100 QC/99100/25
CN
Metric
QM/99012/25
QM/99016/25
QM/99020/25
QM/99025/25
QM/99032/25
QM/99032/25
QM/99050/25
QM/99050/25
QM/99080/25
QM/99100/25
M
0.187
0.187
0.312
0.375
0.375
0.375
0.500
0.500
0.750
0.875
(5)
(5)
(8)
(10)
(10)
(10)
(14)
(14)
(18)
(22)
L
#8-32
#8-32
#10-32
1/4-28
5/16-24
3/8-24
1/2-20
1/2-20
5/8-18
3/4-16
(M5 x 0.8 deep)
(M6 x 1.0 deep)
(M8 x 1.25 deep)
(M10 x 1.25 deep)
(M14 x 1.5 deep)
(M14 x 1.5 deep)
(M18 x 1.5 deep)
(M18 x 1.5 deep)
(M22 x 1.5 deep)
(M26 x 1.5 deep)
0.63
0.83
0.98
1.18
1.18
1.18
1.57
1.57
1.97
2.17
U
(16)
(21)
(25)
(30)
(30)
(30)
(40)
(40)
(50)
(55)
0.27
0.39
0.45
0.55
0.55
0.55
0.79
0.79
1.06
1.22
X
(7)
(10)
(11.5)
(14)
(14)
(14)
(20)
(20)
(27)
(31)
0.21
0.26
0.33
0.41
0.72
0.72
0.88
0.88
1.12
1.28
Z
(5.3)
(6.6)
(8.3)
(10.3)
(18.4)
(18.4)
(22.4)
(22.4)
(28.4)
(32.4)
P
0.39
0.47
0.63
0.78
1.44
1.44
1.75
1.75
2.19
2.50
(10)
(12)
(16)
(20)
(36.6)
(36.6)
(44.5)
(44.5)
(55.6)
(63.5)
0.55
0.63
0.83
0.98
1.61
1.61
1.97
1.97
2.46
2.78
E
(14)
(16)
(21)
(25)
(41)
(41)
(50)
(50)
(62.5)
(70.6)
0.39
0.47
0.63
0.78
0.87
0.87
1.10
1.10
1.50
1.73
A
(10)
(12)
(16)
(20)
(22)
(22)
(28)
(28)
(38)
(44)
0.85
1.10
1.34
1.61
1.65
1.65
2.20
2.20
2.80
3.11
lb (kg)
(21.5)
(28 )
(34)
(41)
(42)
(42)
(56)
(56)
(71)
(79)
0.02
0.02
0.02
0.02
0.04
0.04
0.09
0.20
0.48
0.48
Ordering information To order a basic 25 mm bore cylinder with a 10 mm stroke,
quote: DM/99025/10 plus piston rod clevis mounting: QM/99025/25
Piston rod eye
Ø 12 ... 25 mm
Ø 32 ... 100 mm
L
X
L
Z
A
Z
A
U
U
X
CN
Model
Inch
12 QC/99012/32
16 QC/99016/32
20 QC/99020/32
25 QC/99025/32
32 QC/99032/32
40 QC/99040/32
50 QC/99050/32
63 QC/99050/32
80 QC/99080/32
100 QC/99100/32
Ø
M
M
CN
CN
Metric
QM/99012/32
QM/99016/32
QM/99020/32
QM/99025/32
QM/99032/32
QM/99032/32
QM/99050/32
QM/99050/32
QM/99080/32
QM/99100/32
0,187
0.187
0.312
0.375
0.375
0.375
0.500
0.500
0.750
0.875
M
(5)
(5)
(8)
(10)
(10)
(10)
(14)
(14)
(18)
(22)
#8-32
#8-32
#10-32
1/4-28
5/16-24
3/8-24
1/2-20
1/2-20
5/8-18
3/4-16
L
(M5 x 0.8 deep)
(M6 x 1.0 deep)
(M8 x 1.25 deep)
(M10 x 1.25 deep)
(M14 x 1.5 deep)
(M14 x 1.5 deep)
(M18 x 1.5 deep)
(M18 x 1.5 deep)
(M22 x 1.5 deep)
(M26 x 1.5 deep)
0.63
0.98
0.98
1.18
1.18
1.18
1.57
1.57
1.97
2.17
U
(16)
(25)
(25)
(30)
(30)
(30)
(40)
(40)
(50)
(55)
0.27
0.55
0.45
0.55
0.55
0.55
0.79
0.79
1.06
1.22
X
(7)
(14)
(11.5)
(14)
(14)
(14)
(20)
(20)
(27)
(31)
0.18
0.24
0.3
0.38
0.69
0.69
0.85
0.85
1.08
1.24
Z
(4.7)
(6.2)
(7.7)
(9.7)
(17.5)
(17.5)
(21.5)
(21.5)
(27.5)
(31.5)
0.38
0.44
0.63
0.75
0.87
0.87
1.06
1.06
1.50
1.75
A
(9.7)
(11.2)
(16)
(19)
(22)
(22)
(27)
(27)
(38)
(44.5)
0.85
1.26
1.34
1.61
1.65
1.65
2.2
2.2
2.8
3.11
lb (kg)
(21)
(32)
(34)
(41)
(42)
(42)
(56)
(56)
(71)
(79)
Ordering information To order a basic 25 mm bore cylinder with a 10 mm stroke,
quote: DM/99025/10 plus piston rod eye mounting: QM/99025/32
ACT-9-26
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
0.05
0.05
0.10
0.15
0.20
0.29
0.73
0.73
1.52
1.52
(0.02)
(0.02)
(0.05)
(0.07)
(0.09)
(0.13)
(0.33)
(0.33)
(0.67)
(0.67)
(0.01)
(0.01)
(0.01)
(0.01)
(0.02)
(0.02)
(0.04)
(0.09)
(0.22)
(0.22)
Spares
Cylinder
D*/99012
D*/99016
D*/99020
D*/99025
D*/99032
D*/99040
D*/99050
D*/99063
D*/99080
D*/99100
D*/99125
D*/99160
Spares kit
QM/99012/00
QM/99016/00
QM/99020/00
QM/99025/00
QM/99032/00
QM/99040/00
QM/99050/00
QM/99063/00
QM/99080/00
QM/99100/00
QM/99125/00
QM/99160/00
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-9-27
Section 10
Lintra Rodless Cylinder
Series 46000B, 46100B, and 46200B
Proven Applications..................................................................ACT-10-2
Features......................................................................................ACT-10-4
Specifications ............................................................................ACT-10-5
Series 46000B Internally Guided Carriage..............................ACT-10-6
Series 46100B Externally Guided Carriage.............................ACT-10-8
Series 46200B Roller Guided Carriage..................................ACT-10-10
Series 46000B/L3 Active Holding Brake ...............................ACT-10-12
Series 46000B/L4 Passive Holding Brake.............................ACT-10-14
Series 46000B Right Angle Mounting System .....................ACT-10-16
Series 46000B Without Top Cover.........................................ACT-10-18
Side Mounting Plate with Secondary Carriage ....................ACT-10-19
Foot Mounts.............................................................................ACT-10-20
Center Support Mounts ..........................................................ACT-10-21
Carriage Mounting Plate .........................................................ACT-10-22
Swinging Bridge ......................................................................ACT-10-23
Sensing Switches for 16 to 80 mm Bore Cylinders .............ACT-10-24
Technical Data .........................................................................ACT-10-26
Spare Parts and Kits ...............................................................ACT-10-27
ACT-10-6 – Internally
Guided Carriage
ACT-10-8 – Externally
Guided Carriage
ACT-10-10 – Roller
Guided Carriage
ACT-10-12 – Active
Holding Brake System
ACT-10-14 – Passive
Holding Brake System
ACT-10-16 – Right
Angle Holding System
ACT-10-18 – Carriage
Without Top Cover
ACT-10-19 – Side Mounting
Plate w/Secondary Carriage
ACT-10-20 – Foot
Mount Style "C"
ACT-10-21 – Center
Support Style "V"
ACT-10-22 – Carriage
Mounting Plate Style "UV"
ACT-10-23 – Swinging
Bridge Mounting Style "S"
ACT-10-24 – Switches for
16 mm to 80 mm actuators
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-10-1
Lintra Rodless Actuators
Proven Applications
Start something with Lintra. When your application requires movement, especially linear movement, think Lintra.
Consider the many possibilities available when you choose Lintra. Shown here are some proven Lintra applications,
discover your own.
A manufacturer of custom drapery glides his sewing machines down the length of his
stitching stations attached to Lintra cylinders. The result is a smooth, even
line delivered with precision.
Attach a shelf to the
carriage of a vertical
Lintra cylinder and
you have a lift ready
for action. With stroke
lengths up to 28 feet
(see p. 5), a two-story
lift or a two-foot lift
can be ready made
for your operations.
Mount a paint spray nozzle onto
a Lintra carriage and you have an
inexpensive automated paint sprayer
with excellent repeatability. Lintra
doesn't get tired.
ACT-10-2
What goes up...can readily
be brought back down.
Sturdy Lintra Cylinders
bear the load without the
need for external guides or
supports.
Silk screening, attaching side molding to automobile bodies, any job
where there is a need for even pressure to be applied in a straight line is
a job for Lintra
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Proven Applications
Create new solutions to manufacturing challenges with the simple, durable design of Lintra Cylinders. Your local
NORGREN Lintra Distributor is ready today with helpful application ideas. Lintra - Use it!
Fit a Lintra cylinder with a secondary carriage and side
mounting plate. Now, not only do you have a new
mounting configuration, but a 50% increase in the
loading capability of the cylinder is realized. The side
loading plate really takes advantage of LINTRA's
integral guided carriage.
The Carriage Bracket Accessory transfers power
from the top carriage to a guided mounting plate
on the opposite side of the cylinder. This allows
hanging loads to be transported by the cylinder or
the cylinder to be inverted in dirty environments,
sheltering the seal strips from contaminants.
The “Walking Beam” can straddle
two areas and provide a transporting
bridge to link the two. A horizontal
cylinder fitted with a Right Angle
Mounting System carries the load
from one point to the other while the
second cylinder raises and lowers
the load.
Conveyor lines are moving in the right direction when Lintra cylinders
are used to perform transfers along the system. Cylinders secured
above conveyors or below roller conveyors provide reliable transfers
for the system.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-10-3
Features
●
Lintra rodless cylinders require less space for
installation since the stroke of the cylinder is contained
within the length of the cylinder itself.
●
Magnetic piston standard
●
Integral switch rail on both sides of the
extrusion.
●
Non-rotating load carrying capability without additional
expensive guide rods and bearings
●
Components are made of anodized, corrosion
resistant aluminum.
●
Rodless design means there is no rod that can buckle
or kink.
●
Cushion adjustment standard at both ends of
the cylinder.
●
Equal forces can be applied to each stroke direction.
●
●
All stroke lengths are custom made to customer
requirements.
Stroke velocities up to 98 ft/sec (30 m/s) are
available. Contact factory.
●
The Lintra is designed for easy maintenance.
●
Extreme stroke lengths are available up to 28 ft.
(see ACT-10-5).
●
Lintra cylinders can withstand heavy loads and
inertial moments.
●
Lintra features a wide range of bore sizes:
16 mm bore — 0.63"
20 mm bore — 0.79"
25 mm bore — 0.98"
32 mm bore — 1.26"
40 mm bore — 1.57"
50 mm bore — 1.97"
63 mm bore — 2.48"
80 mm bore — 3.15"
●
Polyurethane seals provide long life.
●
For increased load carrying capabilities and
mounting versatility a variety of options and
accessories are available.
For corrosion resistance put a “V” in front of the
actuator part number. i.e. VC/46032/M...
High corrosion and acid resistance
●
Suitable for food, chemical, pharmaceutical and
offshore oil industry applications.
Notes: For ISO porting with the corrosion resistance option
contact factory.
Corrosion resistance is available for 20 thru 80 mm
only.
The Extruded Tube of the Lintra Series 46000B Cylinder
Vee-guides provide for the
installation of guiding and
mounting elements.
Materials:
End covers: Aluminum (HCR® coated*)
Carriage: Aluminum (HCR® coated*)
Yoke: Moulded plastic – Ø 20 mm,
Aluminum (HCR® coated*) – Ø 25 to 80 mm
Barrel: Extruded aluminum alloy (HCR® coated*)
Sealing strip & piston seals: Polyurethane
Cover strip: Polyamide
Seals: Nitrile rubber
Integral reed
switch rails
Extrusion configuration
resists flex and provides
superior torsional stiffness,
allowing greater loads with
less deflection.
●
Clear coat anodized
corrosion resistant
aluminum.
*HCR®: High Technology Synergistitic Coating
Lintra® 46000 Series Multiple Port Endcaps
Multiple Ported left and right endcaps available in bore
sizes 25mm - 63mm, endcaps are ported with NPT or
Metric ISO G threads.
(L/R) - indicates air applied to this port will move
the carriage from Left to Right.
(R/L) - indicates air applied to this port will move
the carriage from Right to Left.
To specify Multiple Port endcaps place /MC/ in the
fourth position instead of /M/.
Left Cap
Right Cap
(L/R)
(L/R)
(R/L)
(R/L)
(L/R)
(R/L)
(L/R)
(R/L)
ACT-10-4
Brookville, OH USA
Phone 937-833-4033
(R/L)
www.norgren.com
(R/L)
Operating Temperature
-22° to 180°F* (-30°C to 80°C)
Tube and Carriage: Anodized aluminum
End Caps: 16 mm - molded plastic end caps and yoke.
20 mm - anodized aluminum end covers, molded plastic yoke.
25 to 80 mm - anodized aluminum end caps and yoke.
Seal Strips and Piston Seals: Polyurethane
Cover Strips: Polyamide
Guide Rails: UHMW Polymer
Seals: Nitrile rubber or Polyurethane
Operating Pressure
16 mm: 22 to 150 psig (1.5 to 10 bar)
20 mm to 80 mm: 15 to 150 psig (1 to 10 bar)
Bore Sizes:
16 mm bore — 0.63"
20 mm bore — 0.79"
25 mm bore — 0.98"
32 mm bore — 1.26"
40 mm bore — 1.57"
50 mm bore — 1.97"
63 mm bore — 2.48"
80 mm bore — 3.15"
Area (sq. in.)
.31
.49
.75
1.25
1.94
3.05
4.83
7.79
THRUST – Based on 75% of Maximum Thrust
kg
450
lbs.
1000
900
400
80 mm
800
350
Stroke lengths:
16 mm to 40 mm bore - to 28 ft. (8500 mm)
50 mm and 63 mm bore - to 23 ft. (7000)
80 mm bore - to 18 ft. (5500 mm)
Supply Fluid: Compressed air filtered to
50-microns and lubricated.
Cushion Lengths:
16 mm bore — 12 mm (0.48")
20 mm bore — 26 mm (1.02")
25 mm bore — 26 mm (1.02")
32 mm bore — 35 mm (1.38")
40 mm bore — 50 mm (1.97")
50 mm bore — 60 mm (2.36")
63 mm bore — 70 mm (2.76")
80 mm bore — 75 mm (2.95")
Magnetic Non-Contact Sensing Switches: ACT-10-24/25
700
Force
300
600
63 mm
250
500
200
400
50 mm
150
300
100
40 mm
200
32 mm
50
0
100
25 mm
20 mm
16 mm
0
0
0
50
2
100
4
6
150
8
10
psig
bar
Pressure
Cushioning Performance
The dynamic energy of a Lintra cylinder is caused by
direct or partial external loads which must be
absorbed by pneumatic cushioning.The cushioning
ability depends to a large extent on the pneumatic
circuit (e. g. counter pressure, pre-exhaust). The
values given in the diagram were tested with an
operation pressure of 87 psig (6 bar) using a 5/2
control valve. When installed horizontally, depending
upon the speed, dynamic energy can be absorbed by
the cylinder. Whenever the values given in the
diagram are exceeded, the transported mass must be
cushioned by additional shock absorbers. These have
to be located at the center of gravity of the mass.
(kg)
lbs.
(1000) 2205
(800) 1764
(600) 1323
(400) 882
(200)
441
(80)
(60)
(40)
176
132
88
(20)
44
(10)
(8)
(6)
(4)
22
18
13
9
(2)
4
(1)
2
Fz
Mx
My
Fy
Mz
Loading values for Lintra cylinders
The values given in the table below show the single forces in the directions Fy
and Fz and the maximum moments Mx, My and Mz. All values are applicable only
for speeds of max. 0.66 ft/s (0.2 m/s). A requirement for using these values is a
constant movement (no jerking) of the mass over the whole stroke length of the
cylinder. The reference point from which the moments for all cylinders should be
calculated is the centerline of the piston.
For speeds up to 6.6 ft.s (2 m/s) please use our calculation program
PNEUCALC 2A. It is available upon request. PNEUCALC IIA is
suitable for all PC’s having MS-DOS 3.1 and higher.
ø 80
ø 63
ø 50
ø 40
Total loads
ø 32
When a Lintra cylinder has to take several loads and moments, an additional
calculation is necessary using this formula:
ø 25
ø 20
ø 16
1.3
2.6
(0.4) (0.8)
6.6 ft/s
3.9 5.2
(1.2) (1.6) (2.0) (m/s)
V
Mx
My
Mz
Fy
+
+
+
+
Mx max
My max
Mz max
Fy max
Brookville, OH USA
Phone 937-833-4033
Fz
≤
Fz max
1
www.norgren.com
ACT-10-5
Series 46000B
Internally Guided Carriage
●
●
●
●
●
Economical alternative for applications where
limited external guiding is needed
Ideal for light-duty installations, or in
applications where external guides
are required.
Can be used to save money and space.
Same rugged quality construction.
Available with NPT or ISO G ports
Fz
Mx
My
Fy
Load capabilities decrease inversely with piston
velocities greater than 8 in./sec. Consult factory for
additional load/velocity information. Moments are to
be calculated with respect to the centerline of the
cylinder. Values shown are for single axis moments.
For multiple moment applications refer to ACT-10-5.
Mz
Bore
NPT Model
ISO G Model
Lbs Force
Fy
N
Lbs Force
Fz
N
Mx
My
Mz
16 mm
NA
M/46016B/M/*
9
(40)
27
(120)
20 mm
C/46020B/M/*
C/46020B/M/*
20
(90)
63
(280)
25 mm
C/46025B/M/*
M/46025B/M/*
25
(110)
79
(350)
32 mm
C/46032B/M/*
M/46032B/M/*
34
(150)
104
(460)
2.7
(0.3)
34
(3.8)
9.7
(1.1)
8
(0.9)
106
(12)
32
(3.6)
12
(1.3)
168
(19)
50
(5.6)
22
(2.5)
266
(30)
76
(8.6)
In Lbs
Nm
In Lbs
Nm
In Lbs
Nm
*Insert stroke length
40 mm
50 mm
C/46040B/M/* C/46050B/M/*
M/46040B/M/* M/46050B/M/*
68
90
(300)
(400)
203
270
(900)
(1200)
51
(5.8)
681
(77)
195
(22)
87
(9.8)
974
(110)
283
(32)
63 mm
80 mm
C/46063B/M/* C/46080B/M/*
M/46063B/M/* M/46080B/M/*
144
176
(640)
(780)
428
518
(1900)
(2300)
159
(18)
2124
(240)
620
(70)
C/ 4 6 0 3 2 B/M/
*
1
9
2
3
4
C - NPT Porting
M - ISO G Porting
5
6
7
8
Stroke length in inches for NPT
Stroke length in mm for ISO G
MMagnetic Piston (standard)
MC - Magnetic Piston with
multiple ported endcaps
460 - Designates an internally
guided carriage
B - Extrusion
Series
C/46032B/M/40 is a cylinder with internally guided carriage, and NPT ports. It has a 32 mm bore
(bore sizes are always designated in millimeters), magnetic piston, and a 40 inch stroke.
32 - Designates bore size (mm)
ACT-10-6
239
(27)
3186
(360)
885
(100)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Basic Dimensions for Series 46000 Cylinders
E
F
Cushion screw
AB
R
G
M
4.72 (120)†
A-B
N
P
O
AE
Z
W
R1
AC
X
Section
AG
A
K
Y
U
J
D
S
C
P1
B
B
2 x A + stroke
O1
S
View X
for cylinder ø 80 mm
K
†
T
For cylinders
C/46025 to C/46063
Bore
NPT Model
ISO G Model
A
AB
AC
AE
AG
B
C
D
E
F
G
J
K
16 mm
20 mm
25 mm
32 mm
NA
C/46020B/M/* C/46025B/M/* C/46032B/M/*
M/46016B/M/* M/46020B/M/* M/46025B/M/* M/46032B/M/*
2.46 (62.5)
3.35
(85)
3.94 (100)
4.72 (120)
–
–
–
–
0.33 (8.5)
0.55
(14)
0.47
(12)
0.63
(16)
1.56 (39.5)
2.13
(54)
2.36
(60)
2.99
(76)
0.31
(8)
0.71
(18)
0.79
(20)
0.98
(25)
0.69 (17.5)
0.91
(23)
0.91
(23)
1.06
(27)
0.31
(8)
0.31
(8)
0.57 (14.5)
0.41 (10.5)
M5
1/8NPT (G-1/8) 1/8NPT(G-1/8) 1/4NPT (G-1/4)
3.15
(80)
4.33 (110)
5.12 (130)
6.30 (160)
2.36
(60)
3.15
(80)
3.54
(90)
4.72 (120)
–
1.57
(40)
1.77
(45)
2.36
(60)
0.10 (2.5)
0.14 (3.5)
–
–
Ø .12 (3)
Ø .17 (4.2)
0.18 ❏ (4.5) 0.24 ❏ (6)
K
40 mm
50 mm
63 mm
80 mm
C/46040B/M/* C/46050B/M/* C/46063B/M/* C/46080B/M/*
M/46040B/M/* M/46050B/M/* M/46063B/M/* M/46080B/M/*
5.91 (150)
7.09 (180)
8.46 (215)
10.24 (260)
–
–
–
9.45 (240)
0.59
(15)
0.79 (20)
0.79 (20)
0.94 (24)
3.54
(90)
4.33 (110)
4.92 (125)
6.06 (154)
0.98
(25)
0.98 (25)
0.98 (25)
0.98 (25)
1.18
(30)
1.38 (35)
1.57 (40)
1.77 (45)
0.45 (11.5)
0.55 (14)
0.55 (14)
0.67 (17)
1/4NPT(G-1/4) 3/8NPT(G-3/8) 1/2NPT(G-1/2) 1/2NPT(G-1/2)
8.46 (215)
9.84 (250)
12.60 (320)
15.35 (390)
6.30 (160)
7.48 (190)
9.45 (240)
11.81 (300)
3.15
(80)
3.74 (95)
4.72 (120)
5.91 (150)
–
–
–
0.35
(9)
0.24 ❏ (6)
0.31 ❏ (8)
0.31 ❏ (8)
Ø .47 (12)
M
N
O
O1
P
P1
R
R1
S
S1
T
UØ
W
Y
0.71
(18)
M3 - 4 deep
0.98
(25)
1.02
(26)
0.47
(12)
–
1.06
(27)
1.22
(31)
0.63
(16)
0.22 (5.5)
M3 - 5 deep
–
–
0.16
(4)
1.06
(27)
M5 - 12 deep
1.26
(32)
1.26
(32)
0.73 (18.5)
–
1.57
(40)
1.57
(40)
1.26
(32)
0.16
(4)
M5 - 12 deep
–
–
0.47
(12)
1.26
(32)
M5 - 7 deep
1.57
(40)
1.61
(41)
0.63
(16)
0.30 (7.5)
1.89
(48)
1.89
(48)
1.46
(37)
0.22 (5.5)
M5 - 13 deep
–
1.30
(33)
0.28
(7)
1.77
(45)
M5 - 8 deep
2.05
(52)
2.05
(52)
0.79
(20)
0.39
(10)
2.36
(60)
2.36
(60)
1.85
(47)
0.26
(6.5)
M6 - 15 deep
–
1.57
(40)
0.31
(8)
1.77
(45)
M6 - 8 deep
2.56
(65)
2.56
(65)
0.79
(20)
0.39
(10)
2.95
(75)
2.95
(75)
2.28
(58)
0.33 (8.5)
M8 - 20 deep
–
1.97
(50)
0.31
(8)
1.97 (50)
M8 - 11 deep
3.15 (80)
3.15 (80)
0.98 (25)
0.51 (13)
3.54 (90)
3.54 (90)
2.76 (70)
0.39 (10)
M8 - 25 deep
–
2.36 (60)
0.43 (11)
1.97 (50)
M8 - 11 deep
3.74 (95)
3.74 (95)
0.98 (25)
0.55 (14)
4.13 (105)
4.13 (105)
3.31 (84)
0.41 (10.5)
M10 - 25 deep
–
2.76 (70)
0.43 (11)
1.97 (50)
M10 - 15 deep
4.72 (120)
4.72 (120)
1.14 (29)
–
5.12 (130)
5.12 (130)
3.94 (100)
0.59 (15)
M12 - 25 deep
0.43 (11)
3.54 (90)
0.59 (15)
Z
0.64 (16.3)
0.85 (21.5)
0.67
0.79
0.98
1.18
1.38
1.57
(17)
(20)
P1
stroke
S1
A
(25)
(30)
(35)
(40)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-10-7
Series 46100B
Externally Guided Carriage
●
●
●
●
●
The external guiding system provides greater
resistance to axial and radial loads.
Reduces the need for external bearings
or supports.
Large load carrying capability
Operates within its own envelope
Fz
Mx
My
Fy
Mz
Bore
NPT Model
ISO G Model
Lbs Force
N
Lbs Force
Fz
N
In Lbs
Mx
Nm
Fy
My
Mz
In Lbs
Nm
In Lbs
Nm
16 mm
NA
M/46116B/M/*
20 mm
C/46120B/M/*
M/46120B/M/*
25 mm
C/46125B/M/*
M/46125B/M/*
32 mm
40 mm
C/46132B/M/* C/46140B/M/*
M/46132B/M/* M/46140B/M/*
50 mm
C/46150B/M/*
M/46150B/M/*
63 mm
80 mm
C/46163B/M/* C/46180B/M/*
M/46163B/M/* M/46180B/M/*
45
(200)
45
(200)
18
(2)
106
(470)
106
(470)
53
(6)
133
(590)
133
(590)
80
(9)
176
(780)
176
(780)
150
(17)
338
(1500)
338
(1500)
345
(39)
450
(2000)
450
(2000)
577
(65)
720
(3200)
720
(3200)
1066
(120)
878
(3900)
878
(3900)
1598
(180)
49
(5.5)
49
(5.5)
159
(18)
159
(18)
249
(28)
249
(28)
381
(43)
381
(43)
974
(110)
974
(110)
1421
(160)
1421
(160)
3108
(350)
3108
(350)
4618
(520)
4618
(520)
C/ 4 6 1 3 2 B
1
2
3
4
5
6
7
/M/ *
8
9
C - NPT Porting
M - ISO G Porting
461 - Designates an externally
guided carriage
M - Magnetic Piston (std)
B - Extrusion
Series
C/46132/M/40 is a cylinder with externally guided carriage, and NPT ports. It has a 32 mm bore
ACT-10-8
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Bore
NPT Model
ISO G Model
A
AB
AE
AG
AO
B
C
D
E
F
G
H
J
K
L
M
N
O
O1
P1
R
R1
R2
S
S1
T
UØ
W
Y
Z
16 mm
20 mm
25 mm
32 mm
40 mm
50 mm
63 mm
NA
C/46120B/M/* C/46125B/M/* C/46132B/M/* C/46140B/M/* C/46150B/M/* C/46163B/M/*
M/46116B/M/* M/46120B/M/* M/46125B/M/* M/46132B/M/* M/46140B/M/* M/46150B/M/* M/46163B/M/*
2.46 (62.5)
3.35
(85)
3.94 (100)
4.72 (120)
5.91 (150)
7.09 (180)
8.46 (215)
–
2.36
(60)
2.76
(70)
3.54
(90)
4.72 (120)
6.30 (160)
7.48 (190)
1.50 (38)
2.32
(59)
2.66 (67.5)
3.23
(82)
3.84 (97.5)
4.61 (117)
5.39 (137)
0.31
(8)
0.71
(18)
0.79
(20)
0.98
(25)
0.98
(25)
0.98 (25)
0.98 (25)
0.30 (7.5)
0.26 (6.5)
0.37 (9.5)
0.61 (15.5)
0.65 (16.5)
0.94 (24)
1.00 (25.5)
0.69 (17.5)
0.91
(23)
0.91
(23)
1.06
(27)
1.18
(30)
1.38 (35)
1.57 (40)
0.31
(8)
0.31
(8)
0.57 (14.5)
0.41 (10.5)
0.45 (11.5)
0.55 (14)
0.67 (17)
M5
1/8NPT (G-1/8) 1/8NPT (G-1/8) 1/4NPT (G-1/4) 1/4NPT (G-1/4) 3/8NPT (G-3/8) 1/2NPT (G-1/2)
3.15 (80)
4.33 (110)
5.12 (130)
6.30 (160)
8.46 (215)
9.84 (250)
12.60 (320)
2.36 (60)
3.15
(80)
3.54
(90)
4.72 (120)
6.30 (160)
7.48 (190)
9.45 (240)
–
1.57
(40)
1.77
(45)
2.36
(60)
3.15
(80)
3.74 (95)
4.72 (120)
0.89 (22.5)
1.54
(39)
1.71 (43.5)
2.05
(52)
2.36
(60)
2.84 (72)
3.33 (84.5)
–
0.30 (7.5)
0.20
(5)
0.20
(5)
0.20
(5)
0.26 (6.5)
0.30 (7.5)
–
Ø .22 (5.5)
Ø .22 (5.5)
Ø .22 (5.5)
Ø .26 (6.6)
Ø .35 (9)
Ø .35 (9)
1.22 (31)
1.65
(42)
2.05
(52)
2.52
(64)
3.11
(79)
3.62 (92)
4.33 (110)
0.71 (18)
1.06
(27)
1.26
(32)
1.77
(45)
1.77
(45)
1.97 (50)
1.97 (50)
M3 - 4 deep
M5 - 12 deep
M5 - 7 deep
M5 - 8 deep
M6 - 8 deep
M8 - 11 deep
M8 - 11 deep
0.98 (25)
1.26
(32)
1.57
(40)
2.05
(52)
2.56
(65)
3.15 (80)
3.74 (95)
1.26 (32)
1.50
(38)
1.77
(45)
2.05
(52)
2.56
(65)
3.15 (80)
3.74 (95)
–
–
0.30 (7.5)
0.39
(10)
0.39
(10)
0.51 (13)
0.55 (14)
1.06 (27)
1.57
(40)
1.89
(48)
2.36
(60)
2.95
(75)
3.54 (90)
4.13 (105)
1.22 (31)
1.57
(40)
1.89
(48)
2.36
(60)
2.95
(75)
3.54 (90)
4.13 (105)
0.73 (18.5)
0.94
(24)
1.34
(34)
1.67 (42.5)
1.95 (49.5)
2.30 (58.5)
2.68 (68)
0.63 (16)
1.26
(32)
1.46
(37)
1.85
(47)
2.28
(58)
2.76 (70)
3.31 (84)
0.22 (5.5)
0.16 (4.0)
0.22 (5.5)
0.26
(6.5)
0.33 (8.5)
0.39 (10)
0.41 (10.5)
M3 - 5 deep
M5 - 12 deep
M5 - 13 deep
M6 - 15 deep
M8 - 20 deep
M8 - 25 deep
M10 - 25 deep
–
0.22 (5.5)
0.22 (5.5)
0.22
(5.5)
0.26 (6.6)
0.35
(9)
0.35
(9)
–
–
1.30
(33)
1.57
(40)
1.97
(50)
2.36 (60)
2.76 (70)
0.20
(5)
0.47
(12)
0.47
(12)
0.47
(12)
0.47
(12)
0.67 (17)
0.79 (20)
0.64 (16.3)
0.85 (21.5)
0.67
(17)
0.79
(20)
0.98
(25)
1.18 (30)
1.38 (35)
80 mm
C/46180B/M/*
M/46180B/M/*
10.24 (260)
9.45 (240)
6.50 (165)
0.98 (25)
1.50 (38)
1.77 (45)
0.67 (17)
1/2NPT (G-1/2)
15.35 (390)
11.81 (300)
5.91 (150)
3.94 (100)
0.39 (10)
Ø .47 (12)
5.12 (130)
1.97 (50)
M10 - 15 deep
4.72 (120)
4.72 (120)
–
5.12 (130)
5.12 (130)
3.19 (81)
3.94 (100)
0.59 (15)
M12 - 25 deep
0.43 (11)
3.54 (90)
0.98 (25)
1.57 (40)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-10-9
Series 46200B
Roller Guided Carriage
●
●
●
●
●
●
Reduces the need for additional external
guiding.
Reduced friction
Increased load carrying capability
Smoother operation
Large mounting surface
Fz
Mx
My
Fy
Mz
Bore
NPT Model
ISO G Model
Lbs Force
Fy
N
Lbs Force
Fz
N
In Lbs
Mx
Nm
In Lbs
My
Nm
Mz
16 mm
20 mm
25 mm
32 mm
40 mm
NA
C/46220B/M/* C/46225B/M/* C/46232B/M/* C/46240B/M/*
M/46216B/M/* M/46220B/M/* M/46225B/M/* M/46232B/M/* M/46240B/M/*
133
176
338
–
–
(590)
(780)
(1500)
266
351
675
–
–
(1180)
(1560)
(3000)
115
222
515
–
–
(13)
(25)
(58)
373
568
1421
–
–
(42)
(64)
(160)
50 mm
C/46250B/M/*
M/46250B/M/*
450
(2000)
900
(4000)
861
(97)
2131
(240)
373
(42)
2131
(240)
In Lbs
Nm
–
–
568
(64)
1421
(160)
63 mm
80 mm
C/46263B/M/* C/46280B/M/*
M/46263B/M/* M/46280B/M/*
720
–
(3200)
1440
–
(6400)
1598
–
(180)
4618
–
(520)
4618
(520)
C/ 4 6 2 3 2 B / M/
*
1
9
2
3
4
5
6
7
8
C - NPT Porting
M - ISO G Porting*
462 - Designates a roller
guided carriage
M - Magnetic Piston (std)
B - Extrusion
Series
C/46232B/M/40 is a cylinder with a roller guided carriage, and NPT ports. It has a 32 mm bore
ACT-10-10
–
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Basic Dimensions for Series 46200 Cylinders
R
CH
E
B
CB
C
CG
CA
CD
Z
W
R1
S
CF
CE
D
CC
T
stroke
S1
A
2 x A + stroke
S
O
Section A-B
O1
Bore
NPT Model
ISO G Model
25 mm
32 mm
40 mm
50 mm
63 mm
C/46225B/M/* C/46232B/M/* C/46240B/M/* C/46250B/M/* C/46263B/M/*
M/46225B/M/* M/46232B/M/* M/46240B/M/* M/46250B/M/* M/46263B/M/*
A
3.94 (100)
4.72
(120)
5.91
(150)
7.09
(180)
8.46
(215)
B
C
0.91 (23)
0.57 (14.5)
1.06
0.41
(27)
(10.5)
1.18
0.45
(30)
(11.5)
1.38
0.55
(35)
(14)
1.57
0.55
(40)
(14)
CA
CB
CC
CD
CE
CF
CG
CH
1.77 (45)
3.54 (90)
M 6 -14 deep
1.42 (36)
1.65 (42)
2.60 (66)
2.36 (60)
3.35 (85)
2.36 (60)
4.72 (120)
M 8 - 16 deep
1.50 (38)
1.97 (50)
3.15 (80)
2.95 (75)
3.85 (98)
3.15 (80)
5.91 (150)
M 8 - 16 deep
1.65 (42)
2.26 (57.5)
3.74 (95)
3.62 (92)
4.65 (118)
3.54 (90)
7.09 (180)
M 10 - 20 deep
1.73 (44)
2.64 (67)
4.41 (112)
3.94 (100)
5.20 (132)
4.72 (120)
9.45 (240)
M 10 - 20 deep
1.85 (47)
2.93 (74.5)
5.00 (127)
4.33 (110)
5.51 (140)
D
1/8 NPT(G-1/8)
1/4 NPT(G-1/4)
1/4 NPT(G-1/4) 3/8 NPT(G-3/8)
1/2 NPT (G-1/2)
E
5.12 (130)
6.30
O
O1
R
R1
S
S1
T
W
1.57 (40)
1.61 (41)
1.89 (48)
1.89 (48)
1.46 (37)
0.22 (5.5)
M5 - 13 deep
1.30 (33)
2.05
(52)
2.05
(52)
2.36
(60)
2.36
(60)
1.85
(47)
0.26 (6.5)
M6 - 15 deep
1.57
(40)
2.56
(65)
2.56
(65)
2.95
(75)
2.95
(75)
2.28
(58)
0.33 (8.5)
M8 - 20 deep
1.97
(50)
3.15
(80)
3.15
(80)
3.54
(90)
3.54
(90)
2.76
(70)
0.39
(10)
M8 - 25 deep
2.36
(60)
3.74
(95)
3.74
(95)
4.13 (105)
4.13 (105)
3.31
(84)
0.41 (10.5)
M10 - 25 deep
2.76
(70)
0.67
0.79
0.98
1.18
1.38
Z
(17)
Brookville, OH USA
(160)
(20)
8.46
(215)
(25)
9.84
Phone 937-833-4033
(250)
(30)
12.6
(320)
(35)
www.norgren.com
ACT-10-11
Series 46000B/L3
Active Holding Brake System
Attaches to the carriage of the internally guided
cylinder.
● Loads are guided by the integral guide strips at
the sides of the bracket.
● With carriage stopped (air applied to brake unit),
loads are held firmly in place by the brake.
●
Specifications
Pressure Range: 30 to 150 psig
(2 to 10 bar)
Temperature Range: -22° to 180°F
(-30° to 80°C)
Brake Material: Asbestos-Free Brake Pad
Wear Band: Stainless Steel
Body: Aluminum
Technical Data
Brake Selection: Limited by load. No applied force or bending
moment may exceed the “Externally Guided Carriage Load
Carrying Capability” for that cylinder's bore size, shown in the
table on ACT-10-8.
Brake Operation: Air pressure applies the brake.
Note: Brake pad and wear band surfaces must be kept clean
and dry, and free of oil.
Cylinder Length: Limited by load. See deflection tables on
ACT-10-21 for values on maximum unsupported span, load
and resulting deflection.
Caution
In order to avoid a runaway condition, the
brake must be vented to atmosphere
(releasing the brake), allowing the carriage to
move freely, before any pressure change is
made to the cylinder.
A runaway condition may occur if pressure is
applied to one side of the piston and exhausted
from the other side before the brake is released.
NOTE: The Active Brake is a static brake, it is not
designed to stop or slow moving loads.
Cylinder/Brake Circuit
In the air circuit diagrammed at right, pressure is applied to both
sides of the cylinder when the Valve 1 (4-Way/3-Position) is in
normal, spring centered condition. When solenoid “A” is actuated
the carriage will move toward endcap “A”.
When the carriage reaches the desired location along the cylinder
length, the signal to Valve 1 is removed and equal pressure is
applied to both sides of the piston, stopping movement of the
carriage. The directional control Valve 2 (3-Way, Normally Closed)
controlling the brake is then actuated, pressurizing the brake, and
causing the brake pad to contact the wear band, thus holding the
carriage in place. With equal operating pressure on both sides of
the piston, the brake will hold a load (horizontally or vertically) up
to the maximum specified weights shown on ACT-10-13 in the
Holding Force of the Active Brake table.
ACT-10-12
Brookville, OH USA
A
B
Valve 2
3-way,
normally
closed
valve
Valve 1
5-port, 4-way/3position, spring
centered, dual
pressure to
cylinder ports in
center position
Phone 937-833-4033
A
B
www.norgren.com
CO
G 1/8†
AK
AY
AM
AO
AU
AN
AP
Uø
G
AL
AZ
AF
F
AG
†G
1/8 Port is standard on M/46000B/L3
1/8" NPT adapter supplied on C/46000B/L3
E
Bore
NPT Model
ISO G Model
AF
AG
AK
AL
AM
AN
AO
AP
AU
AY
AZ
CO
E
F
G
UØ
25 mm
C/46025B/L3/*
M/46025B/L3/*
2.44
(62)
2.95
(75)
0.48
(12)
2.05
(52)
1.12
(28.5)
2.89
(73.5)
0.53
(13.5)
1.77
(45)
2.87
(73)
0.65
(16.5)
1.18
(30)
0.63
(16)
5.12
(130)
3.54
(90)
—
0.26
(6.6)
32 mm
C/46032B/L3/*
M/46032B/L3/*
3.07
(78)
3.62
(92)
0.48
(12)
2.52
(64)
1.14
(29)
3.54
(90)
0.55
(14)
2.17
(55)
3.52
(89.5)
0.69
(17.5)
1.28
(32.5)
0.71
(18)
6.30
(160)
4.72
(120)
2.36
(60)
0.35
(9)
40 mm
C/46040B/L3/*
M/46040B/L3/*
3.70
(94)
4.41
(112)
0.48
(12)
3.19
(81)
1.36
(34.5)
4.07
(103.5)
0.53
(13.5)
2.56
(65)
4.06
(103)
0.71
(18)
2.07
(52.5)
0.71
(18)
8.46
(215)
6.30
(160)
3.15
(80)
0.35
(9)
50 mm
C/46050B/L3/*
M/46050B/L3/*
4.41 (112)
5.20 (132)
0.48 (12)
3.70 (94)
1.40 (35.5)
4.90 (124.5)
0.57 (14.5)
2.95 (75)
4.88 (124)
0.73 (18.5)
2.56 (65)
0.94 (24)
9.84 (250)
7.48 (190)
3.74 (95)
0.43 (11)
63 mm
C/46063B/L3/*
M/46063B/L3/*
5.20 (132)
5.91 (150)
0.48 (12)
4.41 (112)
1.67 (42.5)
5.53 (140.5)
0.61 (15.5)
3.54 (90)
5.51 (140)
0.81 (20.5)
4.53 (115)
0.94 (24)
12.60 (320)
9.45 (240)
4.72 (120)
0.51 (13)
C/ 4 6 0 3 2 B
1
2
3
4
5
6
/L 3/*
7
8
9
10
C - NPT Porting
M - ISO G Porting
guided carriage
L3 - Active Brake System with magnetic piston
B - Extrusion
Series
C/46032B/L3/40 is a cylinder with internally guided carriage, and NPT ports. It has a 32 mm bore (bore sizes
are always designated in millimeters), and active brake system with magnetic piston, and 40 inch stroke.
Holding force of the Active Brake at 87 psi (6 bar) with dry brake surface:
Cylinder Bore
25
Retention forces in lbs. 112.5
(N)
(500)
Brookville, OH USA
32
202.5
(900)
40
337.5
(1500)
50
562.5
(2500)
Phone 937-833-4033
63
900.0
(4000)
www.norgren.com
ACT-10-13
Series 46000B/L4
Passive Holding Brake System
Attaches to the carriage of the Internally guided
cylinder.
● Loads are guided by the integral guide strips at
the sides of the bracket.
● With carriage stopped, (with no air pressure
applied to the brake unit) loads are held firmly in
place by the brake.
●
Specifications
Pressure Range: 73 to 150 psig
(5 to 10 bar)
Temperature Range: -22° to 180°F
(-30° to 80°C)
Brake Material: Asbestos-Free Brake Pad
Wear Band: Stainless Steel
Body: Aluminum
Technical Data
Brake Selection: Limited by load. No applied force or bending
moment may exceed the “Externally Guided Carriage Load
Carrying Capability” for that cylinder's bore size, shown in the
table on ACT-10-8.
Brake Operation: Air pressure releases the brake.
Note: Brake pad and wear band surfaces must be kept clean
and dry, and free of oil.
Cylinder Length: Limited by load. See deflection tables on
ACT-10-21 for values on maximum unsupported span, load
and resulting deflection.
Cylinder/Brake Circuit
In the air circuit diagrammed at right, pressure is applied to both
sides of the cylinder when the Valve 1 (4-Way/3-Position) is
in normal, spring centered positon. When solenoid “A” is actuated
the carriage will move toward endcap “A”.
When the carriage reaches the desired location along the cylinder
length, the signal to Valve 1 is removed and equal pressure is
applied to both sides of the piston, stopping movement of the
carriage. The directional control Valve 2 (3-Way, Normally Open)
controlling the brake is then actuated, exhausting pressure and
causing the brake pad to contact the wear band, thus holding the
carriage in place. With equal operating pressure on both sides of
the piston, the brake will hold a load (horizontally or vertically) up
to the maximum specified weights shown on ACT-10-15 in the
Holding Force of the Passive Brake table.
ACT-10-14
Brookville, OH USA
Caution
In order to avoid a runaway condition, the
brake must be pressurized (releasing the
brake), allowing the carriage to move freely,
before any pressure change is made to the
cylinder.
A runaway condition may occur if pressure is
applied to one side of the piston and exhausted
from the other side before the brake is released.
NOTE: The Passive Brake is a static brake, it is not
designed to stop or slow moving loads.
A
B
Valve 2
3-way,
normally
open
valve
Valve 1
5-port, 4-way/3position, spring
centered, dual
pressure to
cylinder ports in
center position
Phone 937-833-4033
A
www.norgren.com
B
G 1/8†
AK
AM
AL
CO
Uø
G
AY
AO
AU
AN
AP
AF
AZ
AG
F
†G
1/8 Port is standard on M/46000B/L4
1/8" NPT adapter supplied on C/46000B/L4
E
Bore
NPT Model
ISO G Model
AF
AG
AK
AL
AM
AN
AO
AP
AU
AY
AZ
CO
E
F
G
UØ
25 mm
C/46025B/L4/*
M/46025B/L4/*
2.44
(62)
2.95
(75)
0.39
(10)
2.05
(52)
1.52
(38.5)
3.29
(83.5)
0.93
(23.5)
1.77
(45)
3.27
(83)
1.04
(26.5)
1.18
(30)
0.63
(16)
5.12
(130)
3.54
(90)
—
0.26
(6.6)
32 mm
C/46032B/L4/*
M/46032B/L4/*
3.07
(78)
3.62
(92)
0.47
(12)
2.52
(64)
1.61
(41)
4.02
(102)
1.02
(26)
2.17
(55)
4.00
(101.5)
1.16
(29.5)
1.28
(32.5)
0.71
(18)
6.30
(160)
4.72
(120)
2.36
(60)
0.35
(9)
40 mm
C/46040B/L4/*
M/46040B/L4/*
3.70
(94)
4.41
(112)
0.47
(12)
3.19
(81)
1.83
(46.5)
4.55
(115.5)
1.00
(25.5)
2.56
(65)
4.53
(115)
1.18
(30)
2.07
(52.5)
0.71
(18)
8.46
(215)
6.30
(160)
3.15
(80)
0.35
(9)
50 mm
C/46050B/L4/*
M/46050B/L4/*
4.41 (112)
5.20 (132)
0.71 (18)
3.31 (84)
2.11 (53.5)
5.61 (142.5)
1.28 (32.5)
2.95 (75)
5.59 (142)
1.44 (36.5)
2.56 (65)
0.94 (24)
9.84 (250)
7.48 (190)
3.74 (95)
0.43 (11)
63 mm
C/46063B/L4/*
M/46063B/L4/*
5.20 (132)
5.91 (150)
0.71 (18)
4.41 (112)
2.38 (60.5)
6.24 (158.5)
1.32 (33.5)
3.54 (90)
6.22 (158)
1.52 (38.5)
4.53 (115)
0.94 (24)
12.60 (320)
9.45 (240)
4.72 (120)
0.51 (13)
C/ 4 6 0 3 2 B
1
2
3
4
5
6
7
/L 4/ *
8
10
9
C - NPT Porting
M - ISO G Porting
L4 - Passive Brake System with magnetic piston
guided carriage
B - Extrusion
Series
C/46032B/L4/40 is a cylinder with internally guided carriage, and NPT ports. It has a 32 mm bore (bore sizes
are always designated in millimeters), and passive brake system with magnetic piston, and 40 inch stroke
Holding force of the Passive Brake at 0 psi on dry brake surface:
Cylinder Bore
Retention forces lbs.
(N)
25
49.5
(220)
Brookville, OH USA
32
84.4
(375)
40
141.8
(630)
50
225.0
(1000)
Phone 937-833-4033
63
371.3
(1650)
www.norgren.com
ACT-10-15
Series 46000
Right Angle Mounting System
Provides economical, guided X-Y
axis motion
● Lintra Series 46000 cylinders of like or
different bore sizes may be combined using this
Right Angle Mounting System.
●
Maximum load for Right
Angle Mounting
Y
Externally Guided
Load
Lbs. (Kg)
62
57
53
49
44
(28)
(26)
(24)
(22)
(20)
40
35
31
26
22
18
13
(18)
(16)
(14)
(12)
(10)
(8)
(6)
9
4
(4)
(2)
Note: Numbers preceding curves
refer to table below graph.
Load
Lbs. (Kg)
6
5
4
3
2
1
30
29
26
24
22
(14)
(13)
(12)
(11)
(10)
20
18
15
13
11
9
(9)
(8)
(7)
(6)
(5)
(4)
7
(3)
4
2
(2)
(1)
Roller Guided
QM/46263/40/35
QM/46240/25/35
Stroke
7.9
(200)
1
2
3
4
5
6
16
(400)
24
(600)
31
(800)
39
in.
(1000) (mm)
Stroke
7.9
(200)
16
(400)
24
(600)
31
(800)
39
in.
(1000) (mm)
QM/46125/20/33
QM/46125/25/33, QM/46132/25/33, QM/46140/25/33
QM/46132/32/33, QM/46140/32/33, QM/46150/32/33
QM/46140/40/33, QM/46163/40/33
QM/46150/50/33
QM/46163/63/33
Ordering a Right Angle Mounting System
All systems require two cylinders and one right angle adapter. Because the Right Angle System mounts directly to the yokes,
cylinders do not come with carriages. Right angle adapters incorporate external guided or roller guided systems. When ordering
choose from the cylinders and adapters listed on ACT-10-17. You must order two cylinders and one adapter. Unless
otherwise requested, one cylinder will come with the Right Angle Bracket attached.
Order example for a Right Angle Mounting System using same bore size cylinders
2 cylinders
Right Angle Adapter
QC* / 460 32 / M / 40 / 33
QM / 46132 / 32 / 33
QC* / 460 32 / M / 40 / 33
The number above represents an
+
The numbers above represent two cylinders with
NPT ports (C), 32 mm bores, magnetic pistons (M)
standard, and 40 inch strokes. The “Q” indicates
that these cylinders are part of an assembly, and
the “33” indicates that these cylinders are part of an
externally guided right angle mounting system.
When ordering a Right Angle Mounting System, two
cylinders must be specified as separate line items.
ACT-10-16
Brookville, OH USA
Externally Guided Right Angle
Adapter for 32 mm bore cylinders.
This adapter must be ordered as a
separate line item when ordering the
Right Angle Mounting System. Refer
to ACT-10-17 for cylinder and
adapter numbers.
Phone 937-833-4033
www.norgren.com
A2 + stroke
LD
LC
LA
A1 + stroke
LB
Externally Guided Right Angle Mounting System (Same bore size cylinders)
Note: For ISO ports replace “C” with “M” in second position of the cylinder number and state stroke length in mm.
Bore
25 mm
25 mm
32 mm
32 mm
40 mm
40 mm
50 mm
50 mm
Model
QC/46025/M/*/33
QC/46025/M/*/33
QC/46032/M/*/33
QC/46032/M/*/33
QC/46040/M/*/33
QC/46040/M/*/33
QC/46050/M/*/33
QC/46050/M/*/33
Right Angle Adapter
A1
A2
LA
LB
LC
LD
QM/46125/25/33
3.9 (100)
3.9 (100)
2.7 (69)
4.6 (117)
5.1 (130)
5.1 (130)
QM/46132/32/33
4.7 (120)
4.7 (120)
3.3 (84)
5.7 (144)
6.3 (160)
6.3 (160)
QM/46140/40/33
5.9 (150)
5.9 (150)
3.8 (97)
6.8 (172)
8.5 (215)
8.5 (215)
QM/46150/50/33
7.1 (180)
7.1 (180)
4.6 (116)
8.1 (206)
9.8 (250)
9.8 (250)
* Insert stroke length
Reduction 1 (One cylinder one size smaller than the other cylinder)
Bore
Model
25
20
32
25
QC/46025/M/*/33
QC/46020/M/*/33
QC/46032/M/*/33
QC/46025/M/*/33
mm
mm
mm
mm
Right Angle Adapter
A1
A2
LA
LB
LC
LD
QM/46125/20/33
3.9 (100)
3.4 (85)
2.4 (62)
4.2 (106)
5.1 (130)
4.3 (110)
QM/46132/25/33
4.7 (120)
3.9 (100)
3.0 (77)
5.1 (131)
6.3 (160)
5.1 (130)
Reduction 2 (One cylinder two bore sizes smaller than the other cylinder)
Bore
Model
40
25
50
32
63
40
QC/46040/M/*/33
QC/46025/M/*/33
QC/46050/M/*/33
QC/46032/M/*/33
QC/46063/M/*/33
QC/46040/M/*/33
mm
mm
mm
mm
mm
mm
Right Angle Adapter
A1
A2
LA
LB
LC
LD
QM/46140/25/33
5.9 (150)
3.9 (100)
3.0 (77)
5.5 (139)
8.5 (215)
5.1 (130)
QM/46150/32/33
7.1 (180)
4.7 (120)
3.3 (84)
6.7 (169)
9.8 (250)
6.3 (160)
QM/46163/40/33
8.5 (215)
5.9 (150)
4.3 (108)
7.8 (198)
12.6 (320)
8.5 (215)
Roller Guided Right Angle Mounting System Reduction 2 (One cylinder two bore sizes smaller than the other cylinder)
Bore
40 mm
25 mm
63 mm
40 mm
Model
QC/46240/M/*/35
QC/46225/M/*/35
QC/46263/M/*/35
QC/46240/M/*/35
Right Angle Adapter
A1
A2
LA
LB
LC
LD
QM/46240/25/35
5.9 (150)
3.9 (100)
3.2 (80)
5.6 (142)
8.5 (215)
5.1 (130)
QM/46263/40/35
8.5 (215)
5.9 (150)
4.3 (108)
7.8 (198)
12.6 (320)
8.5 (215)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-10-17
Series 46000
Carriage Without Top Cover
●
Removing the top cover plate reduces overall
mounting height creating useful space
AN
AK
AJ
AM
AH
AL
AO
AP
Bore
NPT Model
ISO G Model
AH
AJ
AK
AL
AM
AN
AO
AP
25 mm
QC/46025/M/*
QM/46025/M/*
0.98
(25)
M5-.20 (5) deep
1.06
(27)
0.79
(20)
0.18
(5)
–
2.09
(53)
1.14
(29)
32 mm
QC/46032/M/*
QM/46032/M/*
1.57
(40)
M6-.24 (6) deep
1.42
(36)
1.06
(27)
0.24
(6)
–
2.60
(66)
1.42
(36)
40 mm
QC/46040/M/*
QM/46040/M/*
2.17
(55)
M6-.24 (6) deep
1.42
(36)
1.06
(27)
0.20
(5)
–
3.15
(80)
1.67
(42.5)
50 mm
QC/46050/M/*
QM/46050/M/*
2.95
(75)
M6-.24 (6) deep
1.61
(41)
1.26
(32)
0.28
(7)
–
3.82
(97)
2.05
(52)
63 mm
QC/46063/M/*
QM/46063/M/*
3.54
(90)
M6-.31 (8) deep
1.61
(41)
1.26
(32)
0.24
(6)
–
4.37
(111)
2.30
(58.5)
80 mm
QC/46080/M/*
QM/46080/M/*
2.36
(60)
M6-.31 (8) deep
1.61
(41)
1.26
(32)
0.28
(7)
7.09
(180)
5.39
(137)
2.83
(72)
NOTE: If the internally guided cylinder is used without the top cover plate, any tooling plate mounted directly to the yoke must be at least as large
as the cover plate area to insure proper preload on the wiper seals.
ACT-10-18
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series 46000 Side Mounting Plate
with Secondary Carriage
Externally guided carriage cylinder is fitted with
a secondary carriage and the side mounting
plate is bolted to both the
secondary and powered carriages.
● Provides a flat mounting surface that moves
with the externally guided carriage along the
side of the cylinder.
● Provides a 50% increase in the load
capabilities of the cylinder.
●
Externally Guided
Carriage
Externally Guided
Secondary Carriage
G
BG
BL
HB
BM
AE
NOTE: Side Mounting Plate must be used with an externally guided carriage
and an externally guided secondary carriage.
M
F
BK
E
BJ
Bore
Side
Mount Plate
Secondary
Carriage
AE
BG
BJ
BK
BL
BM
E
F
G
HB
M
20 mm
25 mm
32 mm
40 mm
50 mm
63 mm
QM/46120/36
QM/46125/36
QM/46132/36
QM/46140/36
QM/46150/36
QM/46163/36
QM/46120/35
QM/46125/35
QM/46132/35
QM/46140/35
QM/46150/35
QM/46163/35
2.32
(59)
M5 - 10 deep
2.13
(54)
1.30
(33)
3.07
(78)
2.17
(55)
4.33
(110)
3.15
(80)
1.57
(40)
3.11
(79)
1.06
(27)
2.66
(67.5)
M5 - 10 deep
2.50
(63)
1.46
(37)
3.39
(86)
2.56
(65)
5.12
(130)
3.54
(90)
1.77
(45)
3.43
(87)
1.26
(32)
3.23
(82)
M5 - 12 deep
3.03
(77)
1.77
(45)
4.06
(103)
3.15
(80)
6.30
(160)
4.72
(120)
2.36
(60)
4.09
(104)
1.77
(45)
3.84
M6 - 12
3.86
2.30
4.69
3.54
8.46
6.30
3.15
4.72
1.77
4.61
(117)
M6 - 15 deep
4.63
(117.5)
2.81
(71.5)
5.63
(143)
4.72
(120)
9.84
(250)
7.48
(190)
3.74
(95)
5.67
(144)
1.97
(50)
5.39
(137)
M8 - 20 deep
5.49 (139.5)
3.33
(84.5)
6.61
(168)
5.51
(140)
12.60
(320)
9.45
(240)
4.72
(120)
6.65
(169)
1.97
(50)
Brookville, OH USA
(97.5)
deep
(98)
(58.5)
(119)
(90)
(215)
(160)
(80)
(120)
(45)
Phone 937-833-4033
www.norgren.com
ACT-10-19
Series 46000
Foot Mount Style ‘C’
A full line of foot mounting systems and
accessories for Series 46000, 46100 and 46200
cylinders.
● Foot mounts are used to bolt cylinders firmly
in place.
●
The Foot Mount, Style C bolts directly into the tapped holes in each
end cap and provides two through holes at each end to facilitate foot
mounting of the cylinder. Two socket head screws are supplied with
each foot mount for mounting to the cylinder end cap.
TOP
AE
AD
TOP
Uø
AA
R
AB
AC
NOTE: When mounted in conjunction with a support bracket the writing ‘TOP’ should be visible on the top side of the mount.
Bore
Part
AA
AB
AC
AD
AE
R
UØ
16 mm
QM/46016/21
0.63
(16)
0.39
(10)
0.59
(15)
0.12
(3)
0.63
(16)
1.06
(27)
0.22
(5.5)
ACT-10-20
20 mm
QM/46020/21
0.67
(17)
0.20
(5)
0.39
(10)
0.39
(10)
0.85
(21.5)
1.57
(40)
0.22
(5.5)
25 mm
QM/46025/21
0.71
(18)
0.28
(7)
0.59
(15)
0.53
(13.5)
0.94
(24)
1.89
(48)
0.28
(7)
32 mm
QM/46032/21
1.02
(26)
0.43
(11)
0.87
(22)
0.65
(16.5)
1.20
(30.5)
2.36
(60)
0.35
(9)
Brookville, OH USA
40 mm
QM/46040/21
1.18
(30)
0.43
(11)
0.87
(22)
0.77
(19.5)
1.48
(37.5)
2.95
(75)
0.35
(9)
Phone 937-833-4033
50 mm
QM/46050/21
1.65
(42)
0.47
(12)
0.98
(25)
0.94
(24)
1.77
(45)
3.54
(90)
0.43
(11)
63 mm
QM/46063/21
1.89
(48)
0.51
(13)
0.98
(25)
1.08
(27.5)
2.13
(54)
4.13
(105)
0.51
(13)
www.norgren.com
80 mm
QM/46080/21
2.52 (64)
0.49 (12.5)
0.98 (25)
1.38 (35)
2.76 (70)
5.12 (130)
0.55 (14)
Series 46000
Center Support Style ‘V’
The Center Support Style V is designed to
mount in the bottom “V” grooves of the
cylinder tube.
● Center mounts may be positioned anywhere
along the length of the cylinder and provide
intermediate support for longer stroke
applications.
● The supports can be utilized in conjunction with
foot mounts.
AM
AK
AE
●
AH
U 1ø
AJ
AF
AG
20 mm
QM/46020/32
0.85
(21.5)
2.05
(52)
2.44
(62)
1.77
(45)
2.36
(60)
0.18
(4.5)
0.47
(12)
0.22
(5.5)
25 mm
QM/46025/32
0.94
(24)
2.36
(60)
2.83
(72)
2.36
(60)
3.15
(80)
0.22
(5.5)
0.51
(13)
0.26
(6.6)
32 mm
QM/46032/32
1.20
(30.5)
2.99
(76)
3.62
(92)
2.76
(70)
3.94
(100)
0.26
(6.5)
0.53
(13.5)
0.35
(9)
40 mm
QM/46040/32
1.48
(37.5)
3.62
(92)
4.25
(108)
3.54
(90)
4.72
(120)
0.30
(7.5)
0.73
(18.5)
0.35
(9)
50 mm
QM/46050/32
1.77
(45)
4.33
(110)
5.04
(128)
4.33
(110)
5.51
(140)
0.30
(7.5)
0.73
(18.5)
0.43
(11)
Deflection Due to Cylinder Weight
Cylinder Deflection Due to External Force
f
Force
(N)
Lbs.
ø80
(0.4) .020
f1 = .039 (1mm)
(0.1) .004
0
f
ø25
ø20
412 (1830)
0
39
79
Supported length
118
39
79
118
157
197
(1000) (2000) (3000) (4000) (5000)
ø16
.07
Supported length
gth
ø63
ø50
ø40
ø32
(10) 2.25
(0.1)
.032
(0.9)
(1) .040
45
(200)
(100) 22.5
.23
(mm) in.
(2) .080
450
225
(1)
2
ø16
ø20
ø25
(.040" Deflection Chart)
(2000)
(1000)
63 mm
80 mm
QM/46063/32 QM/46080/32
2.13
(54) 2.76 (70)
5.20
(132) 6.10 (155)
6.06
(154) 7.09 (180)
4.72
(120) 5.51 (140)
6.30
(160) 7.09 (180)
0.35
(9)
0.47 (12)
0.98
(25) 1.12 (28.5)
0.51
(13) 0.55 (14)
ø80
16 mm
QM/46016/32
0.63
(16)
1.57
(40)
1.97
(50)
0.79
(20)
1.18
(30)
0.14
(3.5)
0.35
(9)
0.22
(5.5)
ø32
ø40
ø50
ø63
Bore
Part
AE
AF
AG
AH
AJ
AK
AM
U1Ø
157
197
(1000) (2000) (3000) (4000) (5000)
236
in.
(6000) (mm)
Cylinder ∅ 32 mm, stroke length 138 in. (3500 mm), external
load 45 lbs. force (200N). Maximum distance between supports
= 72 in. (1830 mm) (see diagram). Therefore an additional
support is required.
Brookville, OH USA
236
in.
(6000) (mm)
2
Cylinder ∅ 40 mm, external force 40.5 lbs. force (180N), distance between
supports 118 in. (3000 mm)
Required: Total deflection
1. Deflection due to external force: See diagram ➔ .03937 in./.225 lb. force
(1mm /100N) · 40.5 lbs. force (180N)
.07 in. (1.8 mm)
2. Deflection due to cylinder weight: See diagram ➔
+ .04 in. (0.9 mm)
Total deflection:
.11 in. (2.7 mm)
Maximum permitted deflection (f1 + f2) < .039 in (1 mm)
39 in. (1000 mm) stroke
CAUTION: A deflection of more than .080" (2 mm) is not recommended
Phone 937-833-4033
www.norgren.com
ACT-10-21
Series 46000
Carriage Mounting Plate Style ‘UV’
●
●
●
●
●
Carriage Mounting Plates offer mounting
versatility.
Transfers the powered motion of the carriage to
a guided mounting plate on the opposite side of
the cylinder.
Useful in applications with underhanging loads.
Allows the load to be suspended without
inverting the cylinder.
In dirty environments the Carriage Mount allows
the cylinder to be inverted to shelter the sealing
strip from settling contaminants.
G
U 1ø
AM 1
AK 1
AE
AN
AP
AL
F
AF
E
AG
Bore
Part
AE
AF
AG
AK1
AL
AM1
AN
AP
E
F
G
U1Ø
ACT-10-22
16 mm
QM/46016/34
0.63 (16)
1.57 (40)
1.97 (50)
0.14 (3.5)
1.22 (31)
0.33 (8.5)
1.59 (40.5)
1.18 (30)
3.15 (80)
2.36 (60)
0.22 (5.5)
20 mm
25 mm
32 mm
40 mm
50 mm
63 mm
80 mm
QM/46020/34 QM/46025/34 QM/46032/34 QM/46040/34 QM/46050/34 QM/46063/34 QM/46080/34
0.85 (21.5)
1.04 (26.5)
1.30 (33)
1.59 (40.5)
1.93 (49)
2.26 (57.5)
2.76 (70)
2.05 (52)
2.44 (62)
3.07 (78)
3.70 (94)
4.41 (112)
5.20 (132)
6.10 (155)
2.44 (62)
2.95 (75)
3.62 (92)
4.41 (112)
5.20 (132)
5.91 (150)
7.09 (180)
0.22 (5.5)
0.22 (5.5)
0.25 (6.5)
0.30 (7.5)
0.31 (8)
0.39 (10)
0.39 (10)
1.65 (42)
2.05 (52)
2.52 (64)
3.19 (81)
3.70 (94)
4.41 (112)
5.20 (132)
0.57 (14.5)
0.69 (17.5)
0.71 (18)
0.94 (24)
0.98 (25)
1.26 (32)
1.26 (32)
2.20 (56)
2.46 (62.5)
3.11 (79)
3.66 (93)
4.49 (114)
5.12 (130)
6.26 (159)
1.42 (36)
1.77 (45)
2.17 (55)
2.56 (65)
2.95 (75)
3.54 (90)
3.94 (100)
4.33 (110)
5.12 (130)
6.30 (160)
8.46 (215)
9.84 (250) 12.60 (320) 15.35 (390)
3.15 (80)
3.54 (90)
4.72 (120)
6.30 (160)
7.48 (190)
9.45 (240) 11.81 (300)
1.57 (40)
1.77 (45)
2.36 (60)
3.15 (80)
3.74 (95)
4.72 (120)
5.91 (150)
0.22 (5.5)
0.26 (6.6)
0.35 (9)
0.35 (9)
0.43 (11)
0.51 (13)
0.55 (14)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series 46000
Swinging Bridge Mounting Style ‘S’
Designed for use in applications requiring
external guides.
● Mount pivots along the axis of the cylinder
● Provides flexible connection between the
cylinder and the external guides
● Bridge floats .16 to .20 inch (4 to 5 mm)
●
AQ
AV
AS
AR
AU
AX
Pivots ± 8°
AW
AT
IE
.16 to .20 inch float
(4 to 5 mm)
Bore
Part
AQ
AR
AS
AT
AU
AV
AW
AX
IE
16 mm
QM/46016/37
1.57
(40)
1.02
(26)
0.47
(12)
1.18
(30)
M4
0.16
(4)
1.89 + .16
(48 + 4)
20 mm
25 mm
QM/46020/37 QM/46025/37
1.97
(50)
2.36
(60)
1.38
(35)
1.57
(40)
1.50
(38)
1.73
(44)
DIN74-Bm 5 DIN74-Bm 5
0.79
(20)
0.79
(20)
1.57
(40)
1.77
(45)
M5
M5
0.20
(5)
0.20
(5)
2.58 +.20
2.76 + .20
(65.5 + 5)
(70 + 5)
32 mm
40 mm
50 mm
63 mm
80 mm
QM/46032/37 QM/46032/37 QM/46050/37 QM/46050/37 QM/46080/37
3.15
(80)
3.15
(80)
3.94 (100)
3.94
(100) 3.94
(100)
1.97
(50)
1.97
(50)
2.36 (60)
2.36
(60)
2.36
(60)
2.32
(59)
2.32
(59)
2.56 (65)
2.56
(65)
2.56
(65)
DIN74-Bm 8
1.18
(30)
1.18
(30)
1.57 (40)
1.57
(40)
1.57
(40)
2.36
(60)
2.36
(60)
3.15 (80)
3.15
(80)
3.15
(80)
M6
M6
M8
M8
M8
0.22
(5.5)
0.22
(5.5) 0.26 (6.5)
0.26
(6.5)
0.26
(6.5)
3.48 + .20
4.04 + .20
4.88 + .20
5.47 + .20
6.63 + .20
(88.5 + 5)
(102.5 + 5)
(124 + 5)
(139 + 5)
(168.5 + 5)
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-10-23
Switches for 16 mm to 80 mm
Bore Cylinders
●
Suitable for all cylinder ranges with magnetic
piston
●
Very neat and compact design
●
LED indicator on LSU models
●
Simple, reliable switching, very fast response time
●
Simple to install
Switch P/N
Switch
Type
Voltage
(V)
Reed
Solid State
AC
DC
LED
Switch Function
Wiring Connection
Switching Current
Switching Power
Contact Resistance
Switching Time
Shock Resistance
Vibration Resistance
Operating
Temperature
Protection Rating
Length of Switch
Diameter of Switch
Cable Material
Cable Length
** Plug in cable
Model
M/P73001/5
M/P73002/5
M/50/LSU/*V
X
M/50/LSU/5U
X
M/50/RAC/5V
X
TM/50/RAU/2S
X
M/50/LSU/CP**
X
10-240
10-170
Yes
Normally Open
2 wire
180mA
10W
150m Ohm
1.8 ms
50g (11ms)
35g (@2000hz)
-20°C to 80°C
-5°F to 175°F
IP66 (DIN 40050)
1.18 in (30mm)
0.252 in (6.4mm)
PVC
* Insert 2 = 2 meters
10-240
10-170
Yes
Normally Open
2 wire
180mA
10W
150m Ohm
1.8 ms
50g (11ms)
35g (@2000hz)
-20°C to 80°C
-5°F to 175°F
IP66 (DIN 40050)
1.18 in (30mm)
0.252 in (6.4mm)
Polyurethane
5 meters
10-240
10-170
No
Changeover
3 wire
180mA
10W
150m Ohm
1.8 ms
50g (11ms)
35g (@2000hz)
-20°C to 80°C
-5°F to 175°F
IP66 (DIN 40050)
1.18 in (30mm)
0.252 in (6.4mm)
PVC
5 meters
10-240
10-170
No
Normally Open
2 wire
180mA
10W
150m Ohm
1.8 ms
50g (11ms)
35g (@2000hz)
-20°C to 150°C
-5°F to 302°F
IP66 (DIN 40050)
1.18 in (30mm)
0.252 in (6.4mm)
Silicone
2 meters
10-60
10-75
Yes
Normally Open
2 wire
180mA
10W
150m Ohm
1.8 ms
50g (11ms)
35g (@2000hz)
-20°C to 80°C
-5°F to 175°F
IP66 (DIN 40050)
1.18 in (30mm)
0.252 in (6.4mm)
PVC
0.3 meters
With M8 X 1
Cable Plug
with M8 X 1 connector (3 wire)
Outer Cover Cable Length
PVC 3 x 0.25
5 meter
PUR 3 x 0.25
5 meter
Electrical Schematics
M/50/LSU*V
M/50/LSU/5U
normally open
M/50/LSU/CP
normally open
TM/50/RAU/2S
normally open
1
Brown
˜
Brown
˜
Brown
Blue
4
M/50/RAC/5V
changeover
˜ Black
(output)
˜ Blue
(output)
Black
Blue
Brown
ACT-10-24
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Switch P/N
Reed
Solid State
AC
DC
LED
Switch Function
Wiring Connection
Switching Current
Switching Power
Contact Resistance
Switching Time
Shock Resistance
Vibration Resistance
Operating
Temperature
Protection Rating
Length of Switch
Diameter of Switch
Cable Material
Cable Length
Switch
Type
Voltage
(V)
** Plug in cable
Model
M/P73001/5
M/P73002/5
M/50/EAP/*V
M/50/EAN/*V
M/50/EAP/CP**
M/50/EAN/CP**
X
10-30
Yes
Sourcing (PNP)
3 wire
150mA
4.5W Max
N/A
0.5ms
N/A
N/A
-20°C to 80°C
-5°F to 175°F
IP67 (DIN 40050)
1.18 in (30mm)
0.252 in (6.4mm)
PVC
X
10-30
Yes
Sinking (NPN)
3 wire
150mA
4.5W Max
N/A
0.5ms
N/A
N/A
-20°C to 80°C
-5°F to 175°F
IP67 (DIN 40050)
1.18 in (30mm)
0.252 in (6.4mm)
PVC
X
10-30
Yes
Sourcing (PNP)
3 wire
150mA
4.5W Max
N/A
0.5ms
N/A
N/A
-20°C to 80°C
-5°F to 175°F
IP67 (DIN 40050)
1.18 in (30mm)
0.252 in (6.4mm)
PVC
0.3 meters
With M8 X 1
Cable Plug
X
10-30
Yes
Sinking (NPN)
3 wire
150mA
4.5W Max
N/A
0.5ms
N/A
N/A
-20°C to 80°C
-5°F to 175°F
IP67 (DIN 40050)
1.18 in (30mm)
0.252 in (6.4mm)
PVC
0.3 meters
With M8 X 1
Cable Plug
with M8 X 1 connector (3 wire)
Outer Cover Cable Length
PVC 3 x 0.25
5 meter
PUR 3 x 0.25
5 meter
Electrical Schematics
M/50/EAP/CP
sourcing (PNP)
1
3
M/50/EAP/*V
sourcing (PNP)
Brown
Brown
Blue
Blue
pnp
A
4
pnp
M/50/EAN/CP
sinking (NPN)
3
1
A
Black
(output)
Black
(output)
M/50/EAN/*V
sinking (NPN)
Blue
Blue
Brown
npn
A
4
Brown
npn
A
Black
(output)
Black
(output)
.18
(4.5)
.29
(15)
.18
(4.5)
.22
(5.6)
.28
(7.1)
.14
(3.5)
.125
(3.2)
Switch Bracket
The M50 switch can be used on pre-Series B extrusion,
16 mm to 25 mm bore size Lintra cylinders by ordering
bracket part number M/P72486. The M50 switch can be
used on pre-series B extrusions, 32mm to 80mm bore
size Lintra Cylinders by ordering bracket part number
QU/33/732/22. These brackets adapt the M/50 (round)
switch into the dovetail grooves on these older extrusions.
M/50 Switch Groove Cover
Part number M/K72725/* is a red plastic switch groove
cover that snaps in place along the length of the Lintra
cylinder extrusion. It holds and protects M/50 switch
cables when mounted to the cylinder.
* Insert cylinder stroke length to order. For C (inch stroke) specify
length in inches and for M (metric stroke) specify in mm.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-10-25
Technical Data
Thrust, Cushion Lengths, Holding Forces
Thrust at 87 psi (6 bar)
Bore
lbs. force (N)
16
22.5
(100)
20
33.8
(150)
25
56.3
(250)
32
92.3
(410)
40
144.0
(640)
50
225.0
(1000)
63
337.5
(1500)
80
540.0
(2400)
*Calculated for dry surface
Air Consumption at 87 psi (6 bar)
cu ft./in stroke (l/cm)
0.01
(0.014)
0.02
(0.022)
0.03
(0.035)
0.04
(0.056)
0.06
(0.088)
0.10
(0.137)
0.16
(0.218)
0.26
(0.350)
Cushion Length
in (mm)
0.47
(12)
1.02
(26)
1.02
(26)
1.38
(35)
1.97
(50)
2.36
(60)
2.76
(70)
2.95
(75)
Active Brake (L3) holding
force* at 87 psig
(6 bar) lb. force (N)
–
–
–
–
112.5
(500)
202.5
(900)
337.5
(1500)
562.5
(2500)
900.0
(4000)
Passive Brake (L4)
holding force* at 0 psig
lb. force (N)
–
–
–
–
49.5
(220)
84.4
(375)
141.8 (630)
225.0 (1000)
371.3 (1650)
Weights of Cylinders lbs. (kg)
Model
Bore
16
20
25
32
40
50
63
80
C/46000B
Weight at 0 in. stroke
0.35
1.10
1.76
3.53
5.95
10.58
15.88
29.11
(0.16)
(0.50)
(0.80)
(1.60)
(2.70)
(4.80)
(7.20)
(13.20)
C/46100B
0.40
1.32
1.98
3.75
6.39
10.80
16.98
29.55
(0.18)
(0.60)
(0.90)
(1.70)
(2.90)
(4.90)
(7.70)
(13.40)
C/46200B
3.75
6.84
11.03
20.07
30.65
(1.7)
(3.1)
(5.0)
(9.1)
(13.9)
C/46000B/L3
3.53
5.95
9.92
16.10
25.36
C/46000B/L4
(1.6)
(2.7)
(4.5)
(7.3)
(11.5)
4.19
6.84
11.47
19.62
27.34
(1.9)
(3.1)
(5.2)
(8.9)
(12.4)
Weight per inch
of Stroke
0.07
0.09
0.11
0.20
0.29
0.42
0.55
0.84
(0.03)
(0.04)
(0.05)
(0.09)
(0.13)
(0.19)
(0.25)
(0.38)
Weights of Mountings and Right Angle Adapters in lbs. (kg)
Bore
16
20
25
32
40
50
63
80
Foot Mount
(ACT-10-20)
0.02 (0.01)
0.07 (0.03)
0.02 (0.01)
0.22 (0.10)
0.44 (0.20)
0.66 (0.30)
0.88 (0.40)
0.88 (0.40)
ACT-10-26
Swinging Bridge
(ACT-10-23)
0.04
(0.02)
0.22
(0.10)
0.44
(0.20)
0.66
(0.30)
0.66
(0.30)
1.10
(0.50)
1.10
(0.50)
1.10
(0.50)
Carriage Mount
Plate (ACT-10-22)
0.22
(0.10)
0.44
(0.20)
0.66
(0.30)
0.88
(0.40)
1.76
(0.80)
2.65
(1.20)
4.41
(2.00)
6.39
(2.90)
Brookville, OH USA
Center Mount
(ACT-10-21)
0.02 (0.01)
0.07 (0.03)
0.09 (0.04)
0.15 (0.07)
0.44 (0.20)
0.44 (0.20)
0.66 (0.30)
0.88 (0.40)
Right Angle Adapter
(ACT-10-17)
QM/46125/25/33
2.43
QM/46132/32/33
3.31
QM/46140/40/33
5.95
QM/46150/50/33
7.94
QM/46125/20/33
2.21
QM/46125/25/33
2.87
Phone 937-833-4033
(1.1)
(1.5)
(2.7)
(3.6)
(1.0)
(1.3)
Right Angle Adapter
(ACT-10-17)
QM/46140/25/33
3.09
QM/46150/32/33
3.97
QM/46163/40/33
8.38
QM/46240/25/35
5.51
QM/46263/40/35
8.82
www.norgren.com
(1.4)
(1.8)
(3.8)
(2.5)
(4.0)
19
14
13
15
10
9
8
16
12
Replacement Parts for C/46000B/M with NPT ports
Internally Guided - C/46000B/M
Cylinder
C/46020B/M/*
C/46025B/M/*
C/46032B/M/*
C/46040B/M/*
C/46050B/M/*
C/46063B/M/*
C/46080B/M/*
Basic Seal kit
Items 12 thru 16 and 20
Part No.
QM/46020/00
QM/46025/00
QM/46032/00
QM/46040/00
QM/46050/00
QM/46063/00
QM/46080/00
Spares Set
Items 12 thru 20
Part No.
QM/46020/88
QM/46025/88
QM/46032/88
QM/46040/88
QM/46050/88
QM/46063/88
QM/46080/88
Spares Set with Seal & Cover
Strip — Items 8, 9 & 12 thru 20
Part No.
QC/46020/*/88
QC/46025/*/88
QC/46032/*/88
QC/46040/*/88
QC/46050/*/88
QC/46063/*/88
QC/46080/*/88
*Overall stroke length in inches
Externally Guided - C/46100B/M
Cylinder
C/46120B/M/*
C/46125B/M/*
C/46132B/M/*
C/46140B/M/*
C/46150B/M/*
C/46163B/M/*
C/46180B/M/*
*Overall stroke
Basic Seal kit
Part No.
QM/46020/00
QM/46025/00
QM/46032/00
QM/46040/00
QM/46050/00
QM/46063/00
QM/46080/00
length in inches
Spares Set
Items 10 thru 20
Part No.
QM/46120/88
QM/46125/88
QM/46132/88
QM/46140/88
QM/46150/88
QM/46163/88
QM/46180/88
Strip — Items 8 thru 20
Part No.
QC/46120/*/88
QC/46125/*/88
QC/46132/*/88
QC/46140/*/88
QC/46150/*/88
QC/46163/*/88
QC/46180/*/88
Roller Guided - C/46200B/M
Cylinder
C/46225B/M/*
C/46232B/M/*
C/46240B/M/*
C/46250B/M/*
C/46263B/M/*
Basic Seal kit
Part No.
QM/46025/00
QM/46032/00
QM/46040/00
QM/46050/00
QM/46063/00
Spares Set
Items 12 thru 20
Part No.
QM/46025/88
QM/46032/88
QM/46040/88
QM/46050/88
QM/46063/88
Part No.
QC/46025/*/88
QC/46032/*/88
QC/46040/*/88
QC/46050/*/88
QC/46063/*/88
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-10-27
Replacement Parts for C/46000B/M, C/46100B/M, and C/46200B/M with NPT Ports
Carriage Assembly
Cylinder
16 mm
20 mm
25 mm
32mm
40 mm
50 mm
63 mm
80 mm
Internally Guided
Part No.
NA
QM/46020/68
QM/46025/68
QM/46032/68
QM/46040/68
QM/46050/68
QM/46063/68
QM/46080/68
Right End Cap
Cylinder
Part No.
16 mm
NA
20 mm
QC/46020/02
25 mm
QC/46025/02
32 mm
QC/46032/02
40 mm
QC/46040/02
50 mm
QC/46050/02
63 mm
QC/46063/02
80 mm
QC/46080/02
Cylinder
16 mm
20 mm
25 mm
32 mm
40 mm
50 mm
63 mm
80 mm
Seal Strip (Item 8)
Part No.
NA
C/P40262/*
C/P40262/*
C/P40344/*
C/P40263/*
C/P40626/*
C/P40626/*
C/P40715/*
Externally Guided
Part No.
NA
QM/46120/69
QM/46125/69
QM/46132/69
QM/46140/69
QM/46150/69
QM/46163/69
QM/46180/69
Left End Cap
Part No.
NA
QC/46020/03
QC/46025/03
QC/46032/03
QC/46040/03
QC/46050/03
QC/46063/03
QC/46080/03
With Roller Guide
Part No.
NA
NA
QM/46225/70
QM/46232/70
QM/46240/70
QM/46250/70
QM/46263/70
NA
Tube
Part No.
NA
C/P41067/*
C/P41066/*
C/P41018/*
C/P41017/*
C/P41064/*
C/P41065/*
C/P41071/*
Item
8
9
10
12
13
14
15
16
19
20
Piston Yoke Assembly
Part No.
NA
QM/46020/M/13
QM/46025/M/13
QM/46032/M/13
QM/46040/M/13
QM/46050/M/13
QM/46063/M/13
QM/46080/M/13
Cover Strip (Item 9)
Part No.
NA
C/P19567/2/*
C/P19567/2/*
C/P19587/2/*
C/P19606/2/*
C/P19644/2/*
C/P19644/2/*
C/P41076/*
ACT-10-28
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Description
Seal strip (1)
Cover strip (1)
Guide bar (2)
Seal (2)
O-ring (1)
O-ring (1)
Seal (2)
O-ring (2)
Closer assy. (2)
Grease (1) tube
19
14
10
9
8
Item
8
9
10
12
13
14
15
16
19
20
13
15
Description
Seal strip (1)
Cover strip (1)
Guide bar (2)
Piston seal (2)
Endcap O-ring (2)
Cush. adj. O-ring (2)
Cushion seal (2)
Port o-ring (2)
Closer assembly (2)
Grease (1) tube
16
12
Replacement Parts for M/46000B/M with Metric Ports
Internally Guided - M/46000B/M
Basic Seal kit
Cylinder
Part No.
M/46016B/M/*
QM/46016/00
M/46020B/M/*
QM/46020/00
M/46025B/M/*
QM/46025/00
M/46032B/M/*
QM/46032/00
M/46040B/M/*
QM/46040/00
M/46050B/M/*
QM/46050/00
M/46063B/M/*
QM/46063/00
M/46080B/M/*
QM/46080/00
Overall stroke length in millimeters
Spares Set
Items 12 thru 20
Part No.
QM/46016/88
QM/46020/88
QM/46025/88
QM/46032/88
QM/46040/88
QM/46050/88
QM/46063/88
QM/46080/88
Part No.
QM/46016/*/88
QM/46020/*/88
QM/46025/*/88
QM/46032/*/88
QM/46040/*/88
QM/46050/*/88
QM/46063/*/88
QM/46080/*/88
Spares Set
Items 10 thru 20
Part No.
QM/46116/88
QM/46120/88
QM/46125/88
QM/46132/88
QM/46140/88
QM/46150/88
QM/46163/88
QM/46180/88
Strip — Items 8 thru 20
Part No.
QM/46116/*/88
QM/46120/*/88
QM/46125/*/88
QM/46132/*/88
QM/46140/*/88
QM/46150/*/88
QM/46163/*/88
QM/46180/*/88
Spares Set
Items 12 thru 20
Part No.
QM/46025/88
QM/46032/88
QM/46040/88
QM/46050/88
QM/46063/88
Part No.
QM/46025/*/88
QM/46032/*/88
QM/46040/*/88
QM/46050/*/88
QM/46063/*/88
Externally Guided - M/46100B/M
Basic Seal kit
Cylinder
Part No.
M/46116B/M/*
QM/46016/00
M/46120B/M/*
QM/46020/00
M/46125B/M/*
QM/46025/00
M/46132B/M/*
QM/46032/00
M/46140B/M/*
QM/46040/00
M/46150B/M/*
QM/46050/00
M/46163B/M/*
QM/46063/00
M/46180B/M/*
QM/46080/00
Roller Guided - M/46200/M
Basic Seal kit
Cylinder
Part No.
M/46225B/M/*
QM/46025/00
M/46232B/M/*
QM/46032/00
M/46240B/M/*
QM/46040/00
M/46250B/M/*
QM/46050/00
M/46263B/M/*
QM/46063/00
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-10-29
Replacement parts for M/46000B/M, M/46100B/M, and M/46200B/M with Metric Ports
Carriage Assembly
Cylinder
16 mm
20 mm
25 mm
32 mm
40 mm
50 mm
63 mm
80 mm
Cylinder
16 mm
20 mm
25 mm
32 mm
40 mm
50 mm
63 mm
80 mm
Internally Guided
Part No.
QM/46016/68
QM/46020/68
QM/46025/68
QM/46032/68
QM/46040/68
QM/46050/68
QM/46063/68
QM/46080/68
Right End Cap
Part No.
QM/46016/02
QM/46020/02
QM/46025/02
QM/46032/02
QM/46040/02
QM/46050/02
QM/46063/02
QM/46080/02
Externally Guided
Part No.
QM/46116/69
QM/46120/69
QM/46125/69
QM/46132/69
QM/46140/69
QM/46150/69
QM/46163/69
QM/46180/69
Left End Cap
Part No.
QM/46016/03
QM/46020/03
QM/46025/03
QM/46032/03
QM/46040/03
QM/46050/03
QM/46063/03
QM/46080/03
With Roller Guide
Part No.
NA
NA
QM/46225/70
QM/46232/70
QM/46240/70
QM/46250/70
QM/46263/70
NA
Tube
Part No.
M/P41097/*
M/P41067/*
M/P41067/*
M/P41067/*
M/P41067/*
M/P41067/*
M/P41067/*
M/P41067/*
Item
8
9
10
12
13
14
15
16
19
20
Description
Seal strip (1)
Cover strip (1)
Guide bar (2)
Seal (2)
O-ring (1)
O-ring (1)
Seal (2)
O-ring (2)
Closer assy. (2)
Grease (1) tube
Piston Yoke Assembly
Part No.
QM/46016/M/13
QM/46020/M/13
QM/46025/M/13
QM/46032/M/13
QM/46040/M/13
QM/46050/M/13
QM/46063/M/13
QM/46080/M/13
*Overall stroke length in millimeters
Cylinder
16 mm
20 mm
25 mm
32 mm
40 mm
50 mm
63 mm
80 mm
Seal Strip (Item 8)
Part No.
M/P40270/*
M/P40262/*
M/P40262/*
M/P40344/*
M/P40263/*
M/P40626/*
M/P40626/*
M/P40715/*
Cover Strip (Item 9)
Part No.
M/P41101/*
M/P19567/2/*
M/P19567/2/*
M/P19587/2/*
M/P19606/2/*
M/P19644/2/*
M/P19644/2/*
M/P41076/2/*
*Overall stroke length in millimeters
ACT-10-30
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Section 11
Lintra-Lite Actuators
Series A44000, Rodless Cylinders
Double Acting
LINTRA®-LIT E Series A44000 Rodless Cylinders
Series A44000 Features ............................................................ACT-11-2
Series A44000 Specifications ...................................................ACT-11-3
Series A44000 Basic Cylinder ..................................................ACT-11-4
Series A44000 Cylinder Mounting Styles ................................ACT-11-5
Series A44000 How to Order ....................................................ACT-11-6
Series A44000 Spare Kits .........................................................ACT-11-7
M/40 Magnetically Operated Reed Switches...........................ACT-11-8
M/41, M/42 Magnetically Operated Solid State Switches.....ACT-11-10
Self-retaining Sealing System has one
of the lowest leakage rates in the industry.
The LINTRA®-LITE rodless cylinder is a cost effective solution for
application where light loading is required or where external
guiding will be used to support the load.
Polyamide cover strip
Magnetic piston is optional for
position sensing switches
Polyurethane seal strip with internally
molded braided stainless steel
reinforcement wires
Yoke is anodized
aluminum
Integral wiper
Proven Polyamide cover strip,
Polyurethane seal strip
Extrusion has
integral slots for
position sensing
switches
Integral foot
mount end
covers are
zinc plated
steel
Optional cushion
adjusting screws
in both end caps
Anodized, corrosion
resistant extruded
aluminum tube
increases resistance to
torsional stresses
Axial ports provide a
compact cylinder profile
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-11-1
Features
●
LINTRA®-LITE rodless cylinders require less space for
installation since the stroke of the cylinder is contained
within the length of the cylinder itself.
●
Non-rotating load carrying capability without additional
guide rods and bearings.
●
Rodless design means there is no rod that can
buckle or kink.
●
Equal forces can be applied to each stroke direction.
●
All stroke lengths are custom made to
customer requirements.
●
Stroke lengths are available up to 236" (6000mm).
For longer stroke lengths, consult factory.
●
LINTRA®-LITE features a choice of bore sizes:
Ø 1" = 0.984" (Ø 25mm)
Ø 11/4" = 1.260" (Ø 32mm)
Ø 11/2" = 1.575" (Ø 40mm)
●
Cushion adjustment optional at both ends
of the cylinder.
●
Magnetic piston optional.
●
Integral switch rail on both sides
of the extrusion.
●
Main components are made of anodized,
corrosion resistant aluminum, with zinc plated
steel integral foot mount end covers.
●
Velocities up to 4.9 ft/sec (1.5 m/s) are achievable.
●
The LINTRA®-LITE is designed for easy
maintenance.
●
Polyurethane seals provide long life.
The Extruded Tube of the LINTRA®-LITE Series A44000 Cylinder
resists flex and provides
superior torsional stiffness,
with little deflection
Integral switch rails for
position sensing switches
Extruded for
self-forming screws
Clear coat anodized
corrosion resistant
aluminum
Cylinder Deflection
Deflection due to cylinder weight.
Force
F (N)
(N) Lbs.
2000
450
(1000)
1000
225
Deflection
f 2f2(mm)
(mm) inch
Deflection f1 f1=
= .039
(1mm)
1 mm
External Load
500
(500) 112.5
(200)
200
45
(100)
100
22.5
ø25
(2000)
(2)
2
.079
(1)
.039
1
(0.6)
(0.4)
0,6
.024
0,4
.016
(0.1)
0,1
.004
ø32
ø40
Deflection due to external load.
ø40
50
(50) 11.25
ø32
(10)
0
0
ø25
10
2.25
11/2" (40mm)
11/4" (32mm)
1"
(1)
(25mm)
.2251
0
0
1000
39 1500
59 2000
79
98 3000
118
(1000) (1500) (2000) (2500)
2500 (3000)
4000
157
(4000)
5000
6000
197
236 inches
(5000) length
(6000)
(mm)
Supported
(mm)
inches (mm) between supports
Cylinder ∅11/4" (32mm), stroke length 138" (3500mm), external load 45 lbs.
(200 N). Maximum distance between supports = 59 inches (1500mm) (see
diagram). Therefore additional support is required.
ACT-11-2
Brookville, OH USA
39
1000
(1000)
79
98 3000
118
2000
(2000) 2500
(2500) (3000)
157
4000
(4000)
197
5000
(5000)
236 inches
6000
(6000) (mm)
Supported
length
(mm)
Supported
length
Cylinder ∅ 40mm, external force 25 lbs. force (120 N), distance
between supports 98 inches (2500mm).
Required: Total deflection
1.Deflection due to external force (f1): See diagram ➔
.039"/20.23 lbs. (1mm /90 N) · 25 lbs. (120 N)
2.Deflection due to cylinder weight (f2): See diagram ➔
Total deflection:
.051" (1.3mm)
+.024" (0.6mm)
.075" (1.9mm)
Maximum permitted deflection:
f1 + f2 ≤ .039 inches (1mm) per 39.37 inches (1000mm) stroke.
Result: .075 inches (1.9mm) are below the maximum permitted
deflection of .098 inches (2.5mm).
Phone 937-833-4033
www.norgren.com
-22° to 180°F* (-30°C to 80°C)
Barrel: Anodized aluminum alloy
End covers: Zinc plated steel / aluminum
Yoke: Anodized aluminum alloy
Cover and Pistons: Plastic
Sealing strip: Polyurethane
Cover strip: Polyamide
Seals: Nitrile rubber and polyurethane
*With dewpoint of supply air less than ambient air temperature at
cylinder, consult our Technical Service for use below +36°F (+ 2°C)
Operating Pressure:
15 to 116 psig (1 to 8 bar)
Bore Sizes:
Ø 1" = 0.984" (Ø 25mm)
Ø 11/4" = 1.260" (Ø 32mm)
Ø 11/2" = 1.575" (Ø 40mm)
Stroke Lengths:
236 inches (6000mm) max.
Supply:
Compressed air, filtered to
50-microns and lubricated.
Cushion Lengths:
Ø 1" = 0.709"
(Ø 25mm = 18mm)
(Ø 32mm = 23mm)
Ø 11/4" = 0.906"
(Ø 40mm = 35mm)
Ø 11/2" = 1.378"
Magnetic Sensing Switches:
Refer to pp. 8 - 11
Loading values for LINTRA®-LIT E cylinders
The values given in the table below show the forces in the
directions Fy and Fz and the maximum moments Mx, My
and Mz. All values are applicable for speeds up to .66 ft/s
(0.2 m/s). A requirement for using these values is a
smooth movement of the mass over the whole stroke
length of the cylinder. The reference point from which
the moments for all cylinders should be calculated is the
center line of the piston.
Total loads
When a LINTRA®-LITE cylinder has to take several loads
and moments, an additional calculation is necessary
using the following formula:
Mx
My
Mz
Fy
Fz
≤1
+
+
+
+
Mx max
My max
Mz max
Fy max
Fz max
Fz
Thrust – Based on 75% of Theoretical Thrust
(kg)
Mx
lbs.
100
200
Force
50
Fy
My
40mm
32mm
100
25mm
Mz
0
0
0
0
25
50
2
100
75
4
6
116
psig
8
(bar)
Pressure
1 bar = 14.5 PSI
1 kg = 2.205 lbs.
1 m/s = 3.3 ft/s
Thrust • Air Consumption • Cushion Length • Loading Values
Cylinder
Inch Ø mm
1"
25
11/4"
32
11/2"
40
Theoretical forces
at 6 bar
lbs
(N)
56
(250)
92
(410)
143
(640)
Air consumption
per stroke at 6 bar
cu.ft./in.(l/cm)
0.03
(0.035)
0.04
(0.056)
0.06
(0.088)
Cushion length
Inch
.709
.906
1.378
(mm)
(18)
(23)
(35)
Loading values
Fy
lbs
(N)
20
(90)
27
(120)
54
(240)
Fz
lbs
63
83
162
(N)
(280)
(370)
(720)
Mx
in/lbs
9
18
36
(Nm)
(1)
(2)
(4)
My
in/lbs
115
186
496
(Nm)
(13)
(21)
(56)
Mz
in/lbs
35
53
142
(Nm)
(4)
(6)
(16)
Loading values applicable to a speed of ≤ .66 ft/s (≤ 0.2 m/s). Maximum working life is normally reached below a speed of 3.3 ft/s (1 m/s).
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-11-3
®
LINTRA -LIT E Rodless Cylinders
Non-magnetic and Magnetic Piston
Double Acting ∅ 1", 11/4", 11/2" (25, 32, 40mm)
● New compact, space-saving design
● Proven sealing system
● Integral switch mounting
● Bumper or adjustable cushioning
● Integral foot mount end covers are standard
Basic Dimensions
A44000 Standard Cylinders
stroke
A
C
B
D
J
K
A-B
Section
D
L
M
E
F
G
N
H
2 x A + stroke
A
P
Cushion screw for cylinders
with adjustable cushioning
Q
Z
X
T
U W
R
O
B
Dimension
1"
25mm
11/4" 32mm
11/2" 40mm
Dimension
1"
25mm
11/4" 32mm
11/2" 40mm
A
3.03
3.66
4.62
B
(77)
3.94
(93)
4.72
(117.5) 6.50
M
.71 (18)
.79 (20)
.79 (20)
C
(100)
(120)
(165)
N
1.57 (40)
1.95 (49.5)
2.24 (57)
.47
.71
.71
D
(12)
(18)
(18)
O
.10 (2.5)
.14 (3.5)
.14 (3.5)
.49
.59
.79
P
1.10 (28)
1.26 (32)
1.42 (36)
E
(12.5)
(15)
(20)
.20
.28
.28
F
(5)
(7)
(7)
.47
.59
.67
Q
R*
.87 (22) NPT.1/8 G 1/8
.94 (24) NPT.1/8 G 1/8
.94 (24) NPT.1/4 G 1/4
(12)
(15)
(17)
S
G
M5
M6
M6
∅S
.47 (12)
.67 (17)
.79 (20)
H
1.57
1.97
2.36
T
1.20 (30.5)
1.57 (40)
1.95 (49.5)
J
(40)
(50)
(60)
1.42
1.89
2.13
U
.08 (2)
.12 (3)
.12 (3)
K
(36)
(48)
(54)
.71
1.02
1.18
W
.85 (21.5)
1.12 (28.5)
1.38 (35)
*Optional NPT or ISO G thread. NPT dimensions are in inches, ISO G dimensions are in mm.
ACT-11-4
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
(18)
(26)
(30)
∅L
.28 (7)
.35 (9)
.35 (9)
X
2.10 (53.5)
2.76 (70)
3.21 (81.5)
Z max.
.28 (7)
.39 (10)
.39 (10)
MOUNTINGS
Q44000AAAAAM337 — Swinging Bridge Mounting Style ‘S’
BA
BB
BF
BC
BD
BG
BJ
BE
Fx
BH
Dimension
1"
25mm
11/4" 32mm
11/2" 40mm
1.57
1.97
2.36
BA
(40)
(50)
(60)
1.57
2.17
2.17
BB
(40)
(55)
(55)
1.10
1.57
1.57
BC
(28)
(40)
(40)
BD (DIN 74)
BM 6
BM 6
BM 6
±.315
±.315
±.315
BE
±(8)
±(8)
±(8)
1.14
1.22
1.22
BF
(29)
(31)
(31)
1.10
1.18
1.18
BG
(28)
(30)
(30)
BH
2.70+.2
(68.5+5)
3.44+.2
(87.5+5)
3.92+.2
(99.5+5)
.08
.08
.08
BJ
(2)
(2)
(2)
Q44000AAAAAM332 — Center Support Mounting Style ‘V’
A
Section
A-B
AD (A/F)
AL
AK
AH
AJ
ø AE
AB
B
Dimension
1"
25mm
11/4" 32mm
11/2" 40mm
.98
1.18
1.57
AB
(25)
(30)
(40)
1.57
1.97
2.36
AC
(40)
(50)
(60)
AC
AF
Adjustable
AG
AD (A/F)
.39
(10)
.39
(10)
.39
(10)
.26
.35
.35
∅ AE
(6.6)
(9)
(9)
Brookville, OH USA
2.28
2.76
3.11
AF
(58)
(70)
(79)
2.76
3.27
3.62
AG
(70)
(83)
(92)
.85
1.12
1.37
Phone 937-833-4033
AH
(21.5)
(28.5)
(35)
.12
.12
.12
AJ
(3)
(3)
(3)
1.22
1.69
2.17
www.norgren.com
AK
(31)
(43)
(55)
2.11
2.76
3.21
AL
(53.5)
(70)
(81.5)
ACT-11-5
Model Codes for Inch (Metric)
A440✶✶AA✶A✶✶✶✶✶
Cylinder Diameters Nominal Inch (mm)
ø 1"
(ø 25mm)
ø 11/4"
(ø 32mm)
ø 11/2"
(ø 40mm)
Specify
25
32
40
Variants
Bumper cushioning, non-magnetic piston
Bumper cushioning, magnetic piston
Adjustable cushioning, non-magnetic piston
Adjustable cushioning, magnetic piston
Specify
A
B
C
D
Porting
ISO G-thread (Specify stroke in mm)
NPT-Thread (Specify stroke in inches)
Specify
A
N
Fractional Increments of Stroke in Inch
A= 0
E = 1/4
J = 1/2
P = 3/4
B = 1/16
F = 5/16
K = 9/16
R = 13/16
C = 1/8
G = 3/8
M = 5/8
S = 7/8
D = 3/16
H = 7/16
N =11/16
T = 15/16
X = Special
Specify Stroke Length in Inches (with NPT-thread port)
236 Inches maximum
✶✶✶✶
Specify Stroke Length in mm (with ISO G-thread port)
6000mm maximum
Bore Size Conversion:
ø 25mm =
.984"
ø 32mm = 1.260"
ø 40mm = 1.575"
1"
11/4"
11/2"
Cylinder Weights
Cylinder Ø
1"
(25mm)
11/4" (32mm)
11/2" (40mm)
Basic Cylinder Weight
lbs.
Kg
1.1
0.5
1.76
0.8
2.87
1.3
Style ‘S’ Mounting Weight
lbs.
Kg
0.33
0.15
0.44
0.20
0.55
0.25
Style ‘V’ Mounting Weight
lbs.
Kg
0.15
0.07
0.33
0.15
0.55
0.25
Weight per
Inch of Stroke
0.08 lbs.
0.14 lbs.
0.19 lbs.
per 100mm
of Stroke
0.15 Kg
0.25 Kg
0.35 Kg
Mountings
Cylinder Ø
1" (25mm)
11/4" (32mm)
11/2" (40mm)
Style ‘S’
Style ‘V’
Page 05
Q44025AAAAAM337
Q44032AAAAAM337
Q44040AAAAAM337
Page 05
Q44025AAAAAM332
Q44032AAAAAM332
Q44040AAAAAM332
Switches
x
x
Model
Reed
Solid state
Model
Reed
M/40/2
M/40/C/2
M/40/P
—
—
x
M/40
M/41, M/42
Solid state
—
—
—
M/41/2
M/42/2
M/42/P
Voltage
a.c.
10 to 240
10 to 110
10 to 60
—
—
—
M/40/P
M/42/P
d.c.
10 to 170
10 to 175
10 to 75
10 to 30
10 to 30
10 to 30
Current
Max.
0.18 A
0.25 A
0.18 A
0.20 A
0.20 A
0.20 A
Temperature
°F
-4° to 176°
-4° to 176°
-4° to 176°
-4° to 158°
-4° to 158°
-4° to 158°
°C
-20° to +80°
-20° to +80°
-20° to +80°
-20° to +70°
-20° to +70°
-20° to +70°
LED
Features
●
—
●
●
●
●
—
Changeover
—
NPN
PNP
PNP
Cable
Length
6.5'
6.5'
16.25'
6.5'
6.5'
16.25'
(2m)
(2m)
(5m)
(2m)
(2m)
(5m)
Cable
Type
PVC 2 x 0.25
PVC 3 x 0.25
PVC 3 x 0.25
PVC 3 x 0.25
PVC 3 x 0.25
PVC 3 x 0.25
Plug-in Cable
Straight
—
—
M/P34614/5
—
—
M/P34614/5
Full information on switches (technical data, polyurethane cable, dimensions etc.) please refer to relevant catalog ACT-11-8 thru 11.
ACT-11-6
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
90°
—
—
M/P34615/5
—
—
M/P34615/5
Page
ACT-11-8
ACT-11-8
ACT-11-8
ACT-11-10
ACT-11-10
ACT-11-10
Spares
Cylinders with Bumper Cushioning
3
13
12
8
37
9
4
Cylinders with Adjustable Cushioning
14
37
15
13
12
8
9
4
Replacement Parts for A44000AA✶AN with NPT Port Thread and Stroke in inches
Cylinder
Ø
1"
11/4"
11/2"
Model
Spares kit includes:
A44025AA✶AN
A44032AA✶AN
A44040AA✶AN
✶ Variants
A, B, C or D
Item
Q44025AACANT788* 3
Q44032AACANT788* 8/9
12/15
Q44040AACANT788* 13/14
37
in inches.
Description
Quantity
Bumper
2
Seal/cover strip
1/1
Piston/cushion seal 2/2
O-Ring
2/2
Cover
1
Grease
2
Seal strip
Item 8
C/P 41628/*
C/P 41629/*
C/P 41630/*
Cover strip
Item 9
C/P41631/*
C/P41632/*
C/P41633/*
Tube
Item 4
C/P41607/*
C/P41613/*
C/P41602/*
* Insert stroke length in inches.
NOTE: Spares kits are common for all cylinder variants. Please specify the cylinder model number when ordering spare parts.
Replacement Parts for A44000AA✶AA with ISO-G Port Thread and Stroke in mm
Cylinder
Ø
25mm
32mm
40mm
Model
Spares kit includes:
A44025AA✶AA
A44032AA✶AA
A44040AA✶AA
✶ Variants
A, B, C or D
Q44025AACAAT788*
Q44032AACAAT788*
Q44040AACAAT788*
in mm.
Item
3
8/9
12/15
13/14
37
Description
Quantity
Bumper
2
Seal/cover strip
1/1
Piston/cushion seal 2/2
O-Ring
2/2
Cover
1
Grease
2
Seal strip
Item 8
M/P 41628/*
M/P 41629/*
M/P 41630/*
Cover strip
Item 9
M/P41631/*
M/P41632/*
M/P41633/*
Tube
Item 4
M/P41607/*
M/P41613/*
M/P41602/*
* Insert stroke length in mm.
NOTE: Spares kits are common for all cylinder variants. Please specify the cylinder model number when ordering spare parts.
Torx® Screw 1
(4 required)
Torx Screws
®
Tube Torque Torx® Screw 1 (4)
Cylinder Ø
1" (25mm)
11/4" (32mm)
11/2" (40mm)
Screw Size
M4x16
M5x20
M6x25
Torque
3-3.5 Nm
6-7 Nm
9-10 Nm
Tool Size
T-20
T-25
T-30
Cap to Mounting Plate Torx® Screw 2 (1)
Cylinder Ø
1" (25mm)
11/4" (32mm)
11/2" (40mm)
Screw Size
M3x8
M3x8
M4x10
Brookville, OH USA
Torque
.8-1 Nm
.8-1 Nm
3-3.5 Nm
Tool Size
T-10
T-10
T-20
Phone 937-833-4033
Torx® Screw 2
(1 required)
www.norgren.com
ACT-11-7
Reed Switches M/40, M/40/C, TM/40, M/40/P
● Compact, low profile reed switches.
● M/40, M/40/P, and TM/40 feature LED indicators.
● Simple, reliable switching for fast response times.
● TM/40 high temperature model.
● M/40/P features a plug-in cable connection.
● CE – Marking.
Specifications
Form:
M/40 M/40/P – Normally open with LED
M/40/C – Normally open/normally closed
TM/40 – Normally open
Switching Voltage:
M/40, M/40/C, TM/40 – 110 VAC or 100 VDC maximum
M/40/P – 60 VAC and 75 VDC maximum
Switching Current:
M/40, M/40/P – 180 mA (temperature dependent), ACT-11-9
M/40/C, TM/40 – 250 mA
Contact Rating:
M/40, TM/40, M/40/P – 10 VA
M/40/C – 5 VA
Response Time:
M/40, M/40/C, M/40/P – 0.6 ms
TM/40 – 1.0 ms
32° to 158°F (0° to 70°C)
TM/40 – 32° to 248°F (0° to 120°C)
Protection Rating:
I.P.67
M/40, TM/40, M/40/P – 10 to 2000Hz 0.11 lbs. (50g)
M/40/C – 10 to 2000Hz 0.11 lbs. (50g)
Cable Length:
M/40 – 6.5' (2m),16.25' (5m) of P.V.C. covered two core cable
M/40/C – 6.5' (2m) of P.V.C. covered three core cable
TM/40 – 6.5' (2m) of silicon rubber covered two core cable
M/40/P – 16.25' (5m) of P.V.C. or Polyurethane covered three
core cable with plug-in connection
Brown +
M/40, M/40/P
Blue –
Green (N.O.)
●
●
●
●
●
M/40/C
TM/40
Blue –
M/40, M/40/C, M/40/P – Nylon 66 body
TM/40 – 30% Glass filled Nylon 66 body
NOTE: When used to switch inductive loads such as solenoids, relays etc., arcing
can occur across the switch contacts depending on the current and voltage involved.
This arcing can be eliminated on d.c. loads by connecting a suitably rated diode
across the load or switch.
On a.c. loads, arcing is more difficult to eliminate, but the contact life can be greatly
extended by reducing the peak voltages by connecting a suitable non-linear
resistor (V.D.R.) across the load or switch.
Brookville, OH USA
●
Brown +
Materials
ACT-11-8
Blue (N.C.)
Red
Alternative Models
M/42/P Solid state model with plug-in cable
– see ACT-11-10
Phone 937-833-4033
www.norgren.com
General Information
Model
M/40
M/40/C
TM/40
M/40/P
Switch type
LED, Normally open, hardwired
Normally open/Normally closed - changeover, hardwired
Normally open, high temperature, hardwired
Normally open with LED, plug-in cable
Cable length
6.5' (2), 16.25' (5)
6.5' (2)
6.5' (2)
16.25' (5)
220
200
180
Switching current mA
Effect of High Temperatures –
M/40 and M/40/P with LED
When using a Reed Switch that incorporates an LED,
the maximum switching current should be reduced
in direct proportion to the rise in temperature above
77°F (25°C).
At maximum temperature of 158°F (70°C) the
maximum switching current must be derated to 80mA.
160
140
120
100
80
60
40
20
32°F
0
158°F
77°F
10
20
30
40
50
60
70
80
90
Temperature °C
M/40, M/40/C, TM/40 Magnetically Operated
0.31
(8)
1.02 (26)
80 (2032)
0.28
(7)
0.63
(16)
0.39
(10)
0.16
(4)
with plug-in cable*
Polarity:
Brown +
Blue –
0.31
(8)
1.00 (25.5)
0.28
(7)
0.63
(16)
Polarity:
Red +
Blue –
Normally open/normally closed:
Red common
Blue normally closed
Green normally open
0.39
(10)
0.16
(4)
Brookville, OH USA
Cable No.
M/P34595/5
M/P34596/5
M/P34614/5
M/P34615/5
Phone 937-833-4033
Connector type
Straight
Angled 90°
Straight
Angled 90°
Outer cover
Polyurethane
Polyurethane
P.V.C.
P.V.C.
www.norgren.com
ACT-11-9
Solid State Switches M/41, M/42, M/42/P
● Compact, low profile solid state switches.
● LED indicator is standard.
● Simple, reliable switching with fast response times.
● Particularly suited for use where high levels of
vibration are present.
● M/42/P features a plug-in cable connection.
● CE – Marking.
Specifications
Form:
M/41 – Solid state with LED (NPN, sinking,
grounded emitter output)
M/42, M/42/P – Solid state with LED (PNP, sourcing,
open collector output)
Switching Voltage:
10V to 28VDC only
M/42/P – 10V to 30VDC only
Switching Current:
M/41 – 20 mA
M/42, M/42/P – 300 mA
Response Time:
1.5 µs
32° to 158°F (0° to 70°C)
Protection Rating:
I.P.67
Immune to shock loads
Cable Length:
M/41, M/42 – 6.5' (2m) of P.V.C. covered three core cable
M/42/P – 16.25' (5m) of P.V.C. or Polyurethane covered
three core
cable with plug-in connection.
Switch Protection:
Diode protection must be used with inductive loads.
Materials
Nylon 66 body.
ACT-11-10
Brookville, OH USA
Red
Green
M/41
Blue
Red +
Green
M/42, M/42/P
Blue -
Alternative Models
M/40
Hardwired cable model –
see ACT-11-8
M/40/C Normally open/normally closed
model with integral cable –
see ACT-11-8
M/40/P Plug-in cable model – see ACT-11-8
TM/40 High temperature model –
see ACT-11-8
Phone 937-833-4033
www.norgren.com
General Information
Model
M/41
M/42
M/42/P
Switch type
Cable length
Solid State with LED, sinking, NPN, hardwired cable
Solid State with LED, sourcing, PNP, hardwired cable
Solid State with LED, sourcing, PNP, plug-in cable
6.5' (2)
6.5' (2)
16.25' (5)
M/41, M/42 Magnetically Operated Switches,
with hardwired cable
,
Polarity:
Red +
Blue –
Green Output
0.31
(8)
1.02 (26)
0.63
(16)
80 (2032)
0.28
0.28
(7)
(7)
0.39
(10)
+
Red
Load
0.16
(4)
Output
+
Load
Green
M/42
Blue
Polarity:
Brown +
Blue –
Black Output
0.31
(8)
1.00 (25.5)
0.28
(7)
0.63
(16)
M/41
Red
Output
–
with plug-in cable*
Green
Blue
–
0.39
(10)
+
0.16
(4)
Brown
Load
Output
–
Cable No.
M/P34595/5
M/P34596/5
M/P34614/5
M/P34615/5
Brookville, OH USA
Phone 937-833-4033
Black
M/42/P
Blue
Connector type
Straight
Angled 90°
Straight
Angled 90°
Outer cover
Polyurethane
Polyurethane
P.V.C.
P.V.C.
www.norgren.com
ACT-11-11
Section 12
Rack and Pinion
Rotary Actuators
Mini Rotary Actuators
Mini Rack and Pinion Rotary Actuators 1/2" and 3/4" Bore Features.......................ACT-12-2
Mini Rack and Pinion Rotary Actuators 1/2" and 3/4" Bore Technical Features ......ACT-12-3
Mini Rack and Pinion Rotary Actuators 1/2" and 3/4" Bore Special Options ...........ACT-12-4
Single Rack and Pinion Mini Rotary Actuators 1/2" and 3/4" Bore ..........................ACT-12-6
Double Rack and Pinion Mini Rotary Actuators 1/2" and 3/4" Bore ........................ACT-12-7
Integral Air/Oil Tandem Double Rack and Pinion Mini Rotary Actuators 3/4" Bore ..ACT-12-8
Mini Rack and Pinion Rotary Actuators Order Information........................................ACT-12-9
Rotary Actuators
Rack and Pinion Rotary Actuators 1-1/8" to 2-1/2" Bore Features.........................ACT-12-10
Rack and Pinion Rotary Actuators 1-1/8" to 2-1/2" Bore Technical Features ........ACT-12-11
Rack and Pinion Rotary Actuators 1-1/8" to 2-1/2" Bore Special Options .............ACT-12-12
Single Rack and Pinion Rotary Actuators 1-1/8" to 2-1/2" Bore ...........................ACT-12-14
Double Rack and Pinion Rotary Actuators 1-1/8" to 2-1/2" Bore ..........................ACT-12-16
Double Rack and Pinion Rotary Actuators 1-1/8" to 2-1/2"
Bore with Standard Air/Oil Tandem Option .........................................................ACT-12-18
Double Rack and Pinion Rotary Actuators 1-1/8" to 2-1/2"
Bore with Integral Air/Oil Tandem Option............................................................ACT-12-18
Multiple (3) Position Rack and Pinion Rotary Actuators ..........................................ACT-12-19
Rotary Actuators Order Information .........................................................................ACT-12-20
Switches ........................................................................................................................ACT-12-21
Rotary Tables................................................................................................................ACT-12-22
Calculating a Moment of Inertia .................................................................................ACT-12-26
Rotary Actuator Applications......................................................................................ACT-12-27
ACT-12-6 –
Single Rack and Pinion
Mini Rotary Actuator
ACT-12-7 –
Double Rack and Pinion
Mini Rotary Actuator
ACT-12-8 – Integral Air/Oil
Tandem Double Rack and
Pinion Mini Rotary Actuator
ACT-12-14 –
Single Rack and Pinion
Rotary Actuator
ACT-12-16 –
Double Rack and Pinion
Rotary Actuator
ACT-12-18 –
Double Rack and Pinion Rotary
Actuator with Standard Air/Oil
Tandem Option
ACT-12-18 – Double Rack and
PinionRotary Actuator with
Integral Air/Oil Tandem Option
ACT-12-19 – Multiple (3, 4, and
5) Position Rack and Pinion
Rotary Actuator
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-12-1
Rack & Pinion Rotary Actuators
Mini Rotary Actuators are constructed with the finest materials for each component!
3 Actuator Body: Precision machined
from 6061-T6, 40,000 PSI minimum
yield aluminum alloy for strength. The
entire body is then black anodized for
maximum wear and corrosion resistance.
1 Seals: Lip type, pressure sensitive
nitrile seals are wear compensating for
long service life and minimum friction.
2 Gear Rack and Piston: One-piece
construction, ground and polished,
stress-proof steel.
3
2
1
Double Rack Shown
6
5
4
5 Pinion Gear and Keyed Output Shaft:
Manufactured from high strength steel
and precision machined as one piece.
The gear/shaft can be easily removed
and reinserted to satisfy a variety of
keyway orientation requirements.
45° – 90° – 180° rotations are
standard and available in single
or double rack models.
6
Seal Kits
Bore
1/2"" Single Rack
1/2"" Double Rack
3/4" Single Rack
3/4" Double Rack
Standard
Part No.
000SK
050SK
100SK
150SK
Low Friction
Part No.
000TK
050TK
100TK
150TK
Viton®
Part No.
000VK
050VK
100VK
150VK
4 Shaft Bearings: SAE 841
oil impregnated bronze bearings
provide excellent wear and low
friction characteristics.
Air/Oil Tandem
Part No.
We recommend that
Air/Oil Tandems are
returned to the factory
for repair.
6 End Caps: Machined from 6061-T6
solid aluminum bar that is anodized for
corrosion resistance.
Torque Output
Theoretical Torque Output in Inch-pounds (Newton-meters)
PSI (bar)
Bore Size
Series
1/2" Single Rack 000
1/2" Double Rack 050
3/4" Single Rack 100
3/4" Double Rack 150
40
2.0
4.0
6.6
13.2
(2.8)
(.23)
(.45)
(.75)
(1.49)
60
2.9
5.8
9.9
19.8
(4.1)
(.33)
(.66)
(1.12)
(2.24)
80
3.9
7.8
13.3
26.6
(5.5)
(.44)
(.88)
(1.50)
(3.0)
90
4.4
8.8
14.9
29.8
(6.2)
(.50)
(1.00)
(1.68)
(3.37)
100
4.9
9.8
16.5
33.0
(6.9)
(.50)
(1.11)
(1.86)
(3.73)
125
6.1
12.2
20.7
41.4
(8.6)
(.69)
(1.38)
(2.33)
(4.68)
150
7.4
14.8
24.8
49.6
(10.3)
(.84)
(1.67)
(2.80)
(5.60)
NOTE: Deduct 10% from torque output for frictional loss. ø3/4" Air/Oil Tandem has the torque output of a Single Rack unit: deduct 20% for frictional loss.
ACT-12-2
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Inch(Newtonpounds meters
per PSI per Bar)
.049
(.080)
.098
(.160)
.165
(.270)
.330
(.540)
Lubrication:
None required
Norgren Rotary Actuators are rated for “no lube added”
service. All internal components are lubricated at the
time of assembly with a Teflon® based grease.
Recommended fluid for air/oil tandem is petroleum based
hydraulic oil, non-foaming, non-detergent
ISO Viscosity grade of 46.
Materials:
End Caps: Black anodized 6061-T6 aluminum
Body: 6061-T6 aluminum alloy, entirely black anodized
Gear Rack: Ground and polished stress proof steel
Pinion Gear and Output Shaft: Manufactured as one piece
from high strength steel.
Shaft Bearings: SAE 841 Bronze
Standard Seals: Nitrile
-20°F to 200°F (-29°C to 93°C) with Standard Nitrile Seals
-20°F to 400°F (-29°C to 204°C) with Viton® Seals
-20°F to 250°F (-29°C to 121°C) with Low Friction Seals
Operating Pressure:
150 PSI (10 Bar)
Supply:
Filtered compressed air to 150 PSI (10 Bar)
Angle of Rotation:
45°, 90°, 180° Standard
Other rotations available
Rotational Tolerance:
-0° + 1/2°
Backlash Between Rack & Pinion:
2 position units less than 1° of arc maximum
NOTE: For 0° backlash at each end of rotation, specify a
double rack actuator with rotation adjustments.
Displacement • Load Bearing Capacity • Unit Weights
Displacement in cubic inches (mm3); Load Bearing Capacity in pounds force (kilograms);
Bearing Distance in inches (mm); Unit Weights in pounds (kilograms)
Bore Size
Single Rack
1/2" Double Rack
3/4" Single Rack
3/4" Double Rack
1/2"
Displacement for
Each Degree
of Rotation
Inch3
(mm3)
.0009
(15)
.0018
(30)
.0029
(48)
.0058
(95)
Axial Load
Bearing Capacity
lbs
(Kg)
10
(4.54)
10
(4.54)
30
(13.62)
30
(13.62)
Radial Load
Bearing Capacity
lbs
(Kg)
25
(11.35)
25
(11.35)
50
(22.70)
50
(22.70)
Distance
Between Bearings
Inch
(mm)
.66
(17)
.66
(17)
.75
(19)
.75
(19)
Basic
Weight-180° Unit
lbs
(Kg)
.172
(.08)
1.563
(.71)
1.344
(.61)
2.063
(.94)
Add for Double
Output Shaft
lbs
(Kg)
.031
(.01)
.031
(.01)
.063
(.03)
.063
(.03)
Rotational Velocity
Maximum rotational velocity of a rotary actuator is difficult
to determine due to varying factors such as pressure, medium,
flow and external loading. Excessive speeds in a given application
can create inertia loads whose shock values could prove
detrimental to the actuator. Use of external stops, cushions,
or other deceleration devices will ensure maximum performance
and actuator life. For calculating a moment of inertia, see page 26.
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
ACT-12-3
Optional Features:
• Port Locations
• Rotation Adjustment
• Viton® Seals for High Temperature
•
•
•
•
• Noise Dampening Bumpers
Integral Air/Oil Tandem (3/4" Bore)
• Double End Output Shaft
Low Friction Seals
Electroless Nickel Plating
Angle Bracket, Front and Rear Flange Mountings
Mini Rotary Actuator Port Locations
Single Rack
Standard Double Rack
with No Rotation Adjustment
Double Rack
with Rotation Adjustment
Integral
Double Rack
Mini Rotary Integral Air/Oil Tandem (ø3/4" Bore)
Norgren ø 3/4" Bore Mini Rotary Actuator
can be supplied with a unique, fully
self-contained, air/oil tandem system.
This option provides extremely smooth,
fully adjustable speed control of
the output shaft.
Maximum Speed in degrees per second: (No Load Condition)
Operating Pressure in PSI (bar)
Bore Size
40
(2.8)
50
(3.4)
60
3/4"
(4.1)
296°
366°
386°
Note: Theoretical Reservoir Pressure 20 PSI.
Oil Temperature 95°F.
70
(4.8)
80
441°
(5.5)
90
480°
(6.2)
518°
Integral Air/Oil Tandem Operating Principle
COUNTERCLOCKWISE
ROTATION
5
4
7
CLOCKWISE
ROTATION
AIR
8
PRESSURIZED
PORT
EXHAUST
PORT
7 OIL
8
6
6
3
1
7
EXHAUST
PORT
7 OIL
AIR
PRESSURIZED
PORT
5/16''
2
(AS VIEWED FACING OUTPUT SHAFT)
2
The 1 closed loop oil system manifold
including the oil reservoir, is attached
to the 2 actuator body. This 3 oil
reservoir allows for the oil fluctuations
caused by variations in temperature.
A 4 spring loaded plunger exerts a
constant pressure on the system oil,
which keeps the system purged of air.
The 5 ring attached to the plunger shaft
will pop up when the system oil needs
replenishment. When air pressure is
applied to 6 either port, the gear racks
move in opposing directions. 7 System
oil is displaced from one rack bore to the
other by way of the integral 8 cartridge
speed controls which meter the oil as it
passes through the manifold to provide
smooth and precise adjustment of the
output shaft velocity.
Low Friction Seals
Electroless Nickel Plating
High Temperature Viton® Seals
Single and Double Rack Mini Rotary
Actuators can be ordered with Low
Friction Seals. Nitrile seals, specially
compounded with Teflon®, offer extremely
smooth low friction operation.
TO ORDER: enter option code 1 or 2 in
Rack/Rotary Type position 2.
For corrosive environments, all external
components of the actuator are
electroless nickel plated or manufactured
from 303 stainless steel with the
exception of the output shaft. Consult
factory for stainless steel output shaft if
required. TO ORDER electroless nickel:
enter option code E in position 13.
Viton® Seals are ideal for higher
temperature applications -20°F to 400°F
(-29°C to 204°C). TO ORDER Viton® seals:
enter option code V in position 13.
ACT-12-4
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Rotation Adjustment
Located in the actuator
end cap, each rotation
adjustment provides up
to 30° of angle reduction.
1/2"
Bore
A
.563 (14.29)
Noise Dampening
Bumpers
A
A urethane insert is
placed in the gear rack
preventing metal to
metal contact and
providing quiet operation.
3/4"
.813 (20.64)
Double End
Output Shaft
Double Rack
Single Rack
Single and Double Rack
Mini Rotary Actuators can
be ordered with optional
double end keyway output
shafts. TO ORDER: enter
option code B in Output
Shaft position 5.
Optional Double
End Output Shaft
Optional Double
End Output Shaft
Angle Bracket
R-920-100
The Angle Bracket can
be used to mount any
ø1/2" or ø3/4" Mini Rotary
Actuator perpendicular
to the axis of a Norgren
Series N twin rod
cylinder (Section 4). All
brackets include mounting
hardware.
TO ORDER: enter
option code 5 in
Mounting position 6.
NOTE: Mini Rotary
Actuators come with
standard 1/4" – 28
threads/counterbore for
#10 socket head cap
screw, machined in the
body for direct mounting,
if desired.
Front and Rear
Flange Mountings
R-80-100
A
B
C
D
E
F
G H
I
J
Bore
A
B
C
D
E
F
G
H
I
J
1/2"
2.00
.25
3.00
2.00
1.25
.75
2.50
1.75
1.00
.25
3/4"
(51)
(6)
(76)
(51)
(32)
(19)
(64)
(44)
(25)
(6)
2.00
.25
3.00
2.00
1.25
.75
2.50
1.75
1.00
.25
(51)
(6)
(76)
(51)
(32)
(19)
(64)
(44)
(25)
(6)
Brookville, OH USA
Flanges are universal and
can be used on both ø1/2"
and ø3/4" Mini Rotary
Actuators. All flange
mounts include mounting
hardware. TO ORDER :
enter option code 2 or 3
in Mounting position 6.
NOTE: Mini Rotary
Actuators come with
standard 1/4" – 28
threads/counterbore for
#10 socket head cap
screw, machined in the
body for direct mounting,
if desired.
Phone 937-833-4033
A
B
C D
øE
øF
G
Bore
A
B
C
D
øE
øF
G
1/2"
2.75
2.125
3.625
4.25
.281
.281
.375
(70)
(54)
(92)
(108)
(7)
(7)
(10)
www.norgren.com
3/4"
2.75
2.125
3.625
4.25
.281
.281
.375
(70)
(54)
(92)
(108)
(7)
(7)
(10)
ACT-12-5
Single Rack & Pinion
Mini Rotary Actuator (ø1/2" & 3/4" Bores)
● Single Rack and Pinion Mini Rotary Actuators
are very compact.
● Theoretical torque from 2.0 to 24.8 inch-pounds
(.23 to 2.80 Newton-meters).
● Rotation angles 45°, 90°, and 180° standard.
● Nitrile Noise Dampening Bumpers optional.
● Viton® Seals optional for higher temperatures.
● Optional Low Friction Seals.
● Body Mount or optional Angle Bracket, Front and
Rear Flange Mountings.
Basic Dimensions Single Rack and Pinion Mini Rotary Actuator
Cap A
Cap B
Port Positions
Single Rack
E
P
Cap B
.125 x .06 Deep
(3.17 x 1.52)
Cap A
Cap A
Cap B
A
.88
(22.35)
1
2
5
4
G
3
H
1/4-28 Tapped Thru
D
Also Counterbore on
Both Sides for #10 Socket
Optional Double
Head Cap Screw
End Output Shaft
for Mounting
1.00 (25.40)
2.00 (50.80)
Bore
1/2" Single Rack and Pinion
3/4" Single Rack and Pinion
A
3.50
4.88
D
(89)
(124)
1.06
1.25
E
(27)
(32)
1.00
1.25
G
(25)
(32)
1.50
2.00
H
(38)
(51)
.59
.69
øK
(15)
(18)
.375
.500
(9.53)
(12.70)
P
10-32
1/8 NPT
Single Rack and Pinion Mini Rotary Actuator Order Information
0
1
2
3
4
5
6
7
A
A
8
9
0
10 11 12 13
Bore
0
1/2"
1
3/4"
Cushions
A
N/A
Rack/Rotary Type
0
Single Rack Standard Seals
1
Single Rack Low Friction Seals
Flow Controls
A
N/A
Multiple Position
0
N/A
Rotation
A
45°
B
90°
C
180°
X
Special
Output Shaft
A
Single End Keyway Standard
B
Double End Keyway
X
Special
ACT-12-6
Switches
0
N/A
Mounting
1
Standard
2
Front Flange
3
Rear Flange
5
Angle Bracket
X
Special
Brookville, OH USA
Port & Location
A
Port Position 1*
B
Port Position 2
C
Port Position 3
D
Port Position 4
F
Port Position 5
Rotation Adjustments
1
No Adjustment
2
End Cap A
3
End Cap B
4
End Caps A & B
X
Special
Bumper
A
No Bumpers
B
End Cap A
C
End Cap B
D
All Caps
See ACT-12-9 for complete instructions
on how to order Mini Rotary Actuators.
*Standard Port Location
Phone 937-833-4033
Options
0
No Option
E
Electroless Nickel
V
Viton® Seals
X
Special (Specify)
www.norgren.com
Double Rack & Pinion
Mini Rotary Actuator (ø1/2" & 3/4" Bores)
● Double Rack and Pinion Mini Rotary Actuators have
double the theoretical torque of a Single Rack
Rotary.
● Theoretical torque from 4.0 to 49.6 inch-pounds
(.45 to 5.60 Newton-meters).
● Rotation angles 45°, 90°, and 180° standard.
● Nitrile Noise Dampening Bumpers optional.
● Viton® Seals optional for higher temperatures.
● Optional Low Friction Seals.
● Body Mount or optional Angle Bracket, Front and
Rear Flange Mountings.
P

Contents Norgren Pneumatic Actuator Products

Transcription

Similar documents

ISUZU, VOLVO, MITSUBISHI TOYOTA A40 SERIES RWD

Die BUCHSTAVIER - Das Dosierte Leben

Interchangeable Cylinder - ASP series

NFPA STEEL CYLINDERS