1967 - 1976 Firebird Parts and Illustration Catalog

Transcription

1967 - 1976 Firebird Parts and Illustration Catalog
I
FIREBIRD
PARTS C?UALOGUE
GROUP 3.000
FUEL EXHAUST
CARBURETiON
ILLUSTRATION INDEX
Description
1967
AIR INJECTION
ACCELERATOR LiNKAGE
1967-68 FUEL SYSTEM
AIR CLEANERS AND PRE-HEATERS
CRUISE CONTROL
1973-76 AIR INJECTION
EXHAUST GAS RECIRCULATION
RAM AIR SYSTEMS
EMISSION CONTROLS
1975-76 COLD AIR INLET
EXHAUST SYSTEMS
Illust. Na.
1 3
4 12
13
14- 15
16 18
19- 20
21
22-25
26-32
-
-
-
33
GROUP 3.725 CARBURETOR CHARTS
ROCHESTER CARBURETORS
1-102
.
~IR1
PARTS CATALOGUE
1967 FIREBIRD O.H.C. 6 CYL. ENGINE AIR INJECTION
PUMP MOUNTING—W/POW!R STEERING
Key
Part Name
Group Na
—
BOLT, Air Pump to Supports (3/8—16 x 5 1/8”)
8.900
2
—
BOLT, Pulley to Air Pump (5/16” —24 x 1/2”)
8.900
3
—
PULLEY, Air Pump
3.650
4
—
NUT, Steering Pump Pulley
6.655
5
—
NUT, Air Pump Support Bolt (3/8—16 Hex. Lock)
8.915
6
—
WASHER, Steering Pump Pulley
6.655
7
—
SPACER, Air Pump Front to Rear Support
3.655
8
—
PULLEY, Steering Pump
6.655
9
—
CLIP, Wire Homes to Head
N.S.
10— BOLT, Air Pump Rear Support to Head (3/8”..16 x 7/8”)
8.900
11 —SUPPORT, Air Pump
3.655
-
Rear
12
—
SPACER, Pump Bracket to Rear Support (13/32” x 1” x 5/16”)
3.655
13
—
WASHER, Pump to Mtg. Brkt. (13/32” x 3/4” x 1/8”)
2.277
14
—
PLUG, Air Pump Presure Set
3.665
15
—
PUMP ASM., Air
3.660
16
—
SPACER, Air Pump Fr. Support to Strg. Pump Support
3.655
17
—
SUPPORT, Air Pump
3.655
18
—
BOLT, Air Pump Support to Strg. Pump Support (3/8” —16 x 11/4”)
—
Front
. . .
8.900
19— BOLT, Air Pump to Support (3/8”—l6x 1 %/4”)
8.900
20— BOLT, Air Pump to Support (3/8”—16 x4 3/4”)
8900
21
9.900
—
BOLT, Air Pump Frt. Support to Bracket (3/S”—16 x 33/4”)
GROUP 3.000 ILLUSTRATION 1
~ffl~IR1
PARTS CATALOGUE
Exc. POWEE STRO.
W/ POWER STEG.
1967 O.H.C. 6 CYL. ENGINE AIR INJECTION SYSTEM
Key
1
2
Part Name
—
—
VALVE ASM., Air Injection Check
TUBE ASM., Air Injection
—
Single Inlet
3 — FITTING, Air Injection Tube — Long (2 Req’d.)
4 — TUBE, Air Injection Extension
5 — FITTING, Air Injection Tube — Short (4 Req’d.)
6 — FITTING, Air Injection Diverter Valve Vac. Hose
7 — HOSE, Air Diverter Valve Vacuum (3/16” 1.0. x 15—1/2”)
8 — ELBOW, Air Diverter Valve Vacuum Hose
9 — BOLT, Air Diverter Valve to Brkt. (1/4—20 x 7/8” 280M)
10 — NUT, Air Diverter Valve, Brkt. to Pump (5/16—18 lock)
11 — CLAMP, Inlet or Outlet Hose (1—1/8” to 1—7/16”)
12 — CLEANER & SILENCER, Carburetor Air
13 — NUT, Air Diverter Valve Brkt. to Pump (3/8—16 lock)
14 — BRACKET, Air Diverter Valve Mtg. (w/Power Strg.)
15—BOLT, Air Diverter Valve Brkt. to Pump (3/8—16 x 1—1/2” 280M)...
16 — HOSE, Air Injection Pump Inlet (w/Power Strg.)
17 — VALVE ASM., Intake Air Diverter
18—CLAMP, Inlet o1 Outlet Hose (7/8” to 1—1/8”)
19 —HOSE, Pump Outlet to Air Diverter Valve
20 — HOSE, Air Diverter Valve so CSeck Valve
21 — BRACKET, Air Diverter Valve Mtg. (w/Std. Strg.)
22 — HOSE, Air Injection Pump Inlet (w/Std. Strg.)
GROUP 3.000 ILLUSTRATION 2
Group No.
3.6 70
3.675
3.680
3.675
3.680
3.6 75
3.440
3.680
8.900
8.9 17
STO STOCK
3.402
8.9 17
3.672
8.900
3.675
3.670
STD STOCK
3.6 75
3.675
3.672
3.675
1GM
PARTS CATALOGUE
fl~flRD
1967 EIGHT CYLINDER ENGINES AIR INJECTION SYSTEM
Key
Part Name
Group No.
1
—
SEAL, Outlet Pipe to Bracket “0” Ring
2
—
PIPE ASM., Irjection Diverter Outlet
3
—
VALVE ASM., Air Injection Check (Single Inlet)
—
3.675
R.H
3.675
3.670
4—CLAMP, Air Hose (1-1/8” to 7/16”)
5
—
HOSE, Diverter Valve to Check Valve
6
—
VALVE ASM., Intake Air Diverter
7
—
FITTING, Air Diverter Valve
8
—
CLAMP, Air Hose (1—3/16” to 7/8”)
9
—
BRACKET, Air Diverter Valve
STD STOCK
—
R.H
3.675
3.670
3.675
STD STOCK
3.672
10 — BOLT, Diverter Valve to Bracket (1/4—20 x 7/8”)
8.900
11
—
NUT, Diverter Valve Bracket to Outlet Fitting (3/8—16)
8.915
12
—
HOSE, Outlet Hose to Diverter Valve
3.675
13
—
HOSE, Air Inlet
3.675
14 — CLEANER & SILENCER, Carburetor Air
15
—
3.402
HOSE, Carb. to Valve (14—3/4” Long) —2 Bbl. Carb. (Cut
to
Length)
.
3.675
16— HOSE, Carb. to Valve (11—1/2” Long) —4 Bbl. G.T.O. & 428 Eng.
(Cut to Length)
3.675
17 — HOSE, Carb. to Valve (12—1/2” Long) —4 Bbl. 326 & 400 Eng. (1/4” I.D.)
8.962
18 — HOSE, Diverter Valve to Check Valve
3.675
19 — PIPE ASM., Injection Diverter Outlet
—
—
L.H
L.H
‘jGHOUP 3.000 ILLUSTRATION 3
3.675
j~77~IRn1
PARTS CATALOGUE
1967 FIREBIRD ACCELERATOR LINKAGE
GROUP 3.000 ILLUSTRATION 4
.
1GM
T7~flRD
PARTS CATALOGUE
1967 FIREBIRD ACCELERATOR LINKAGE
Key
Port Name
—
2
3
4
5
6
7
8
9
10
Il
12
13
14
—
—
—
Group No
SWIVEL, Accelerator Control Rod
BUSHING, Accelerator Control Rod to Lever
PIN, Throttle Control Idler Lever to Mtg. Stud (3/32’ x 3/4”)
SLEEVE, Accelerator Control Rod to Lever
SPRING, Throttle Control Return (w/1 B.C.)
ROD, Carb. to Accelerator Control Lever (w/1 B.C.)
— BRACKET, Accelerator
Pull—Back Spring (w/l B.C. Exc A.C.)
— SCREW
& LOCKWASHER, Bracket to Corb. (p12—28 x 15/16”)
— CLIP, Control Lever Rod to Control Lever
— BOLT, Downshift Mtg. Bracket to Intake Manifold (5/16—18 x 5/8”). . .
— BRACKET, Downshift Switch Mtg. (6 C>). AT. — I B.C.)
— STUD, Accelerator Control Idler Lever
— LEVER, Throttle Control Idler
— WASHER, Throttle Control Idler Lever to Mt
0. Stud (3/B x 3/41
15 — ROD, Throttle Control Idler Iw/4 B.C.)
16 — ROD, Accelerator Control Lever to Corb. (8 C>). cxc. 326 4 B.C.) . . .
17 — LEVER, Accelerator Control Rod
18 — SWIVEL, Accelerator Control Roo
19 — ROD, Idler Lever to Accelerator Control Lever (w/l B.C.)
20 — LEVER, Accelerator Control Rod
21 — BUSHING, Accelerator Pedal Rod
22 — SUPPORT, Accelerator Pedal Rod
23 — PEDAL, Accelerator
24 — SPRING, Accelerator Tension to Control Rod
25 — ROD, Accelerator Pedal Control
26 — SWITCH, ldle Speed-Up Control (6 C1). wXA.C.)
27 — FITTING, Throttle Control Switch to Vacuum hose
28 — HOSE, Idle Control Switch to Intake Manifold
29 — BOOT, Downshift Switch
30 — NUT, Switch to Bracket
31 — SPACER, Downshift Switch Mounting
32 — SWITCH, Downshift Control
33 — BRACKET, Downshift Switch Mtg
34 — REDUCER, Throttle Idler Lever to Compensator Elbow (3/8” x 1/8”)
35 — ELBOW, Hat Idle Compensator
36 — NUT, Throttle Lever to Extension (p10—24)
37 — LOCKWASHER, Throttle Lever to Extension (#10)
to Extension
38 — EXTENSION, Throttle Lever
(w/A. C.(~ 10—24
I B.C.)x 1/2”)
39 — COMPENSATOR,
40
SCREW, Throttle Lever
Hot Idle (6 C>). A.C. - I B.C.)
41 — SCREW & LOCKWASHER, Idle Cant. Switch to Carb. (‘12—28x 1516”) . .
42 — DIAPHRAGM ASM., Throttle Return
43 — BOLT, Diaphragm to Bracket (1/4—20 x 1/2 “)
44 — BRACKET, Downshift Ewitch Mt
9
45 — SWITCH, Downshift Control
46— NUT, Carb. Lever Extension to Lever 11/4-20)
47 — BOLT, Corb. Lever Extension to Lever (1/4’ —20 x 1 p2”)
48 — SPRING, Throttle Control Return (Exc. Cruise Control)
49 — EXTENSION, Cat. Lever 18 C71. 326 4 B.C.)
50 — BRACKET, Vac. Diaphragm & Vapor Diverter Mtg. (8 C>). 326 AT. - 4 B.C.)
51 — SWITCH & BRACKET, Idle Speed Up Control (w,’A.C.)
52 — HOSE, Idle Control Switch to Intake Manifold
53 — LEVER, Throttle Control Idler (6 C>). 5.7. - 4 BC)
54 — LOCKWASHER, Downshift Switcn Mtg. Bracket to Intake Manifold (5/16”)
55 — BOLT, Downshift Switch Mtg. Bracket to Intake Manif. (5/16’ —18 x 3i4”)
56 — SPRING, Throttle Control Return 6 Cyl. 4 B.C.)
57 — ANCHOR, Throttle Control Return Spring 16 C>). 4 B.C.)
58 — EXTENSION, Carb. Lever 6 C>). 4 B.C.)
59 — ROD, Carb. to Idler Lever ‘~6 C>). 4 B.C.)
60 — BRACKET, Downshift Switch Mtg. 6 C>’). AT. 4 B.C.I
61 — BRACKET, Downshift Switch Mtg
62 — SWITCH, Downshift Control
63 — EXTENSION, CarL. Lever (8 C>). 326 2 B.C.)
64 — BRACKET, Downshift Switch Mtg
65 — SWITCH, Downshift Control
66 — EXTENSION, CarL. Lever 16 C1). 400 4 B.C.)
67 — DIAPHRAGM, Throttle Return
—
—
GROUP 3.000 ILLUSTRATION 5
3.425
3.431
3.425
3.463
3.459
3.430
3.459
8.977
3.425
8.900
4.057
3.463
8.929
3.430
3.430
3.454
3.425
3.430
3.454
3.431
3.431
3.451
3.459
3.431
3.440
3.4.40
3.440
4.057
4.057
4.057
4.057
4.057
N.S.
3.820
8.915
8.931
8.977
3.454
3.820
N.S.
3.440
8.900
4.057
4.057
8.917
8.900
3.459
3.454
3.440
3.440
3.440
3.463
8.931
8.900
3.459
3.459
3.454
3.430
4.057
4.057
4.057
3.454
4.057
4.057
3.454
3.440
[GM
TThflTRfl
PARTS CATALOGUE
M.T.
6-CYL. 1-BBL. A.T.
-ii
8-CYL.
8-CYL. 2-BBL.
1968 FIREBIRD ACCELERATOR LINKAGE
GROUP 3.000 ILLUSTRATION 6
‘GM
PARTS
CATALOGUE
FIREBIRD
1968 FIREBIRD ACCELERATOR LINKAGE
Key
1
2
3
4
Part Name
Graup No.
CLAMP, Throttle Control Cable Ret
SCREW, Throttle Control Cable Bracket Clomp (1/4—20 x 5/8”) . . . .
— CABLE ASM., Throttle Control
— WASHER, Throttle Control Cable to Control Lever (13/64” x 13/32” x
3/64”)
S — COTTER PIN, Throttle Control Cable to Control Lever (1/16” x 1/2”).
6 — COTTER PIN, Throttle Control Idler Lever to Control Lever (3/32” x
3/4”)
7 — LEVER ASM., Throttle Control Idler (6—Cyl. l—BbI. M.T.)
8 — STUD, Accelerator Control Idler Lever
9 — COMPENSATOR ASM., Carb. Hot Idle
10 — ELBOW, Carb. Hot Idle Compensator
11 — ROD, Carb. to Accelerator Control Lever (6—Cyl.)
12 — NUT, Carb. Throttle Lever Ext. to Throttle Lever (#10~24)
13 — CL1P, Carl,. to Accelerator Cant. Lever Rod Lower
14 — SPRING, Throttle Control Return (6—Cyl. 1 —Bbl. M.T.)
15 — ANCHOR, Throttle Control Return Spring (6—Cyl. l—BbI.)
16 — LOCK WASHER, Carl,. Throttle Lever Ext. Bolt (#10 Med.)
17— BRACKET, Idle Stop Solenoid Mtg. (6—Cyl. 1-861. M.T.)
18 — NUT, Idle Stop Solenoid to Mtg. Bracket (1/4—20)
19 — SCREW, Idle Stop Solenoid Bracket to Carl,. (#10—32 x 3/8”)
20 — SOLENOiD, Idle Stop (6-C>).)
21 — BOLT, Idle Stop Solenoid to Mtg. Bracket (1/4” -20 x 1/2”)
22 — BOLT, Throttle Control Cable Mtg. Bracket (5/16—18 x 5/8”)
23 — BRACKET, Throttle Control Cable Mtg. (6—C>). 1—861.)
24 — GASKET, Throttle Control Lever to Dash
25 — SUPPORT, Accelerator Pedal Rod
26 — SCREW, Support to Dash (1/4—14 x 3/4”)
27 — RETAINER, Pedal Rod to Support & Dash (5/16” Rin
9)
28 — PEDAL ASM., Accelerator
29 — PIN, Accelerator Pedal Rod Clevis
30 — SPRING, Accelerator Pedal Tension to Control Rod
31 — ROD ASM., Accelerator Pedal
32 — SCREW, Carl,. Throttle Lever Ext. to Throttle Lever (#10~24 x 1/2”) . .
33 — EXTENSION, Carl,. Throttle Lever (6—Cyl. 1—Bbl. M.T.)
34 — SCREW, Throttle Control Cable to Dash (1/4”-14 x 3/4”)
35 — WASHER, Throttle Control Idler Lever (25/64” ID. x 3/4” OD.) ...
36 — BRACKET, Idle Stop Solenoid Mtg. (6-Cyl. 4-B6I. & 8-Cyl. 4—861.) . .
37 — EXTENSION, Carl,. Lever (6—C>’l. 4—861.)
38 — LEVER ASM., Throttle Control Idler (6—Cyl. 4—Bl,l.)
39 — SPACER, Downshift Switch Mtg
40 — NUT, Downshift Switch & Spacer to Bracket
41 — BOOT, Downshift Switch
42 — BOLT, Control Cable Mtg. Bracket (5 16-18 x 3/4”)
43 — LOCK WASHER, Control Cable Mtg. Bracket Screw (5 16” Std.)
44 — BRACKET, Downshift Switch Mounting (6—C>). 4—861.)
45
46
47
48
49
—
—
SWITCH ASM., Downshift Contral
— ROD, Corb. to Idler Lever (6—C>). 4—861.)
— ANCHOR, Throttle Control Return Spring (6—Cyl. 4—BbI.)
— SPRING, Throttle Control Return
(6—Cyl. 4—861.)
— LEVER ASM., Thrattle Control Idler (6—Cyl. 1—861. A.T.)
50—SPRING, Throttle Control Return (6—Cyl. 1—861. A.T.)
51 — SCREW, Bracket to Cat. (#12~28 x 15/16”)
52 — BRACKET, Idle Speed—Up Control Mtg. (6—Cyl. 1—861. A.T.)
53 — EXTENSION, Carb. Throttle Lever (6—Cyl. 1 —861.)
54 — BRACKET, Downshift Switch Mtg. (6—Cyl. 1—861. A.T.)
55 — SPRING, Throttle Control Return (8—Cyl.)
56 — BRACKET, Downshift Switch Mtg. (8—C>). 2—861.)
57 — EXTENSION ASM., Carl,. Lever (8—C>). 2—861.)
58 — SOLENOID ASM., Idle Stop (8-C>).)
59 — BRACKET, Idle Stop Solenoid Mounting (B—Cyl. 2461.)
60— BRACKET, Downshift Switch Mtg. (8—Cyl. 4—861.)
61 — EXTENSION ASM., Carl,. Lever (8—Cyl. 4—861.)
62 — EXTENSION, Solenoid Mounting Bracket to Corb. (8Cyl. 2—861.)
—
GROUP 3.000 ILLUSTRATION 7
.
.
.
.
3.425
8.977
3.430
N.S.
B.938
8.938
3.463
3.452
3.820
3.820
3.430
8.915
3.425
3.459
3.459
8.931
3.444
8.915
N.S.
.3.440
8:900
8.900
3.459
3.431
3.431
N.S.
8.934
3.451
3.452
3.459
3.431
8.977
3.454
N.S.
3.463
N.S.
3.454
3.463
4.057
4.057
4.057
8.900
8.931
4.057
4.057
3.430
3.459
3.459
3.463
3.459
N.S.
3.444
3.454
4.057
3.459
4.057
3.454
3.440
3.444
4.057
3.454
3.444
I GM
FIREBIRD
PARTS
CATALOGUE
1969 FIREBIRD ACCELERATOR LINKAGE
GROUP 3.000 ILLUSTRATION S
1GM
flThTRD
PARTS CATALOGUE
1969 FIREBIRD ACCELERATOR LINKAGE
Key
Port Name
Group Na.
NUT, Carl,. Throttle Lever Ext. to Throttle Lever (#lO~24)
LOCK WASHER, Carl,. Throttle Lever Ext. Bolt (#10 Med.)
— CLIP, Carb. to Accelerator Control Lever Rod Lower
— SPRING, Throttle Control Return (6—C>). l—BbI.)
S — ANCHOR, Throttle Control Return Spring (6 C/I. 1—861.)
6 — BRACKET, Idle Stop Solenoid Mtg. (6 Cyl. 1—861. M.T.)
7 — BOLT, Idle Stop Solenoid toMtg. Bracket (1/4—20 x 5/8)
8 — SCREW, Idle Stop Solenoid Bracket to Carb. (~ID—24 x 3/8”)
9 — SOLENOID, Idle Stop
10 — NUT, Idle Stop Solenoid to Mtg. Bracket (1/4—20)
11 — BOLT, Throttle Cable Control Mtg. Bracket (5/16—18 x 5/8”)
12 — BRACKET, Throttle Control Cable Mtg. (6 Cyl. 1 861.)
13 — BRACKET, Downshift Cable Mtg. (w M—38 Trans.)
14 — CABLE ASM., Downshift Control (w M-.38 Trans.)
15 — CLAMP, Throttle Control Cable Ret
16 — SCREW, Throttle Control Cable Bracket Clamp (1 4” 20 x 5 8” Hex.)
17— SCREW, Carb. Throttle Lever Ext. to Carb. (~ID—24 x 1/2” Hex.)
18 — EXTENSION, Carb. Throttle Lever (6 C/I. I 861. M.T.)
19 — LEVER, Downshift Cable Throttle Control (w M-38 Trans.)
20 — INSERT, Downshift Control Lever (w M—38 Trans.)
21 — WASHER, Downshift Cable to Lever (1 8” x 1 2’ x 1 32”)
22 — RETAINER, Downshift Coole to Throttle Lever
23 — WASHER, Throttle Control Idler Lever (25/64” 1.0. x 3 4” O.D.)
24 — COTTER PIN, Thrattle Control Idler Lever to Control Lever (3 32” x 3 4”).
25 — LEVER & PIN ASM., Throttle Control Idler (6 CyI. I 861. M.T.)
26 — COTTER PIN, Throttle Control Cable to Control Lever (1 16” x 1 2’) . . . .
27 — WASHER, Throttle Control Cable to Control Lever (13/64” x 13/32” x 3/64”)
28 — STUD, Accelerator Control Idler Lever
29 — ROD, Carl,. to Accelerator Control Lever (6 Cyl.)
30 — CABLE ASM., Throttle Control
31 — SCREW ASM., Throttle Control Cable to Dash (I 4-14 x 3/4”>
32 — GASKET, throttle Control Lever to Dosh
8.915
8,931
3.425
3.459
3.459
3.444
8.900
N.S.
3.440
8.915
8.900
3.459
4.060
4.057
3.425
8.900
8.900
3.454
4.060
3.454
N.S.
4.057
3.463
8.938
3.463
8.938
N.S.
3.430
3.430
3.430
8.977
3.431
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
SD
51
52
53
54
3.431
8.934
3.45 1
3.45 1
3.452
3.459
—
2
3
4
—
SUPPORT, Accelerator Pedal Rod
RETAINER, Pedal Rod to Support & Dash (5, 16”)
— PLATE, Accelerator Trim
— PEDAL ASM,, Accelerator
— PIN, Accelerator Pedal Rod Clevis
— SPRING, Accelerator Pedal Tension to Control Rod
— ROD ASM., Accelerator Pedal
— CLIP, Trans. Downshift Cable to Roceer Arm Cover
— SEAL, Downshift Cable to Trans. (‘ 0’
Ring)
— BOLT, Downshift Cable to Trans. Case — Attach. (I, 4—20 x 1 p2”)
— LEVER ASM., Throttle Contra
Idler (6 C>’!. 1 861. A.T.)
— NUT, Downshift Switch & Spacer to Bracket
— BOOT, Downshift Switch
— BRACKET, Downshift Switch Mtg. (6 CyI. I BbI. A.T.)
— SPACER, Downshift Switch Mtg
— SWITCH ASM., Downshift Control
— ANCHOR, Throttle Control Return Spring (6 C>’l. 4 B6I.)
— SPRING, Throttle Control Return (6 C>’l. 4 861.)
— ROD, Caro. to Idler Lever (6 C>’l. 4 861.)
—. BRACKET, Throttle Control Cable Mounting (6 Cyl. 4 Bbl.)
— LOCKWASHER, Control Cable Mtg. Brkt. Bolt (5, 16” Std.)
— BOLT, Control Cable Mtg. Braceet to Manifold (5 16 ‘ x 18 x 3 4 ‘)
55 — LEVER, Downshift Cable Throttle Control
56 — LEVER, Throttle Control Idler (6 C>’’. 4 861. M.T.)
57 — EXTENSION, Caro. Lever (6 C/I. 4 861.)
58 — BRACKET, Idle Stop Solenoid Mtg. (6 C>). 4 B6I. 8 C>’l. 4 861.)
59 — BRACKET, Downshift Switch Mounting (8 C/I. 4 861.)
60 — BRACKET, Downshift Cable Mtg. (8 C/I. 2 861.)
61 — SPRING, Throttle Control Return (8 C>’I.)
62 — EXTENSION ASM., Carb. Lever (8 C/I. 4 86!.)
63 — BRACKET, Downshift Switch Mounting (8 C>’!. 2 861.)
64 — NUT, Idle Stop Solenoid to Mtg. Brkt. (1 4—20)
65 — EXTENSION ASM., Carl,. Lever (3 C/I. 2 861.)
—
—
GROUP 3.000 ILLUSTRATION 9
3.430
4.057
4.057
8.900
3.463
4.057
4.057
4.057
4.057
4.057
3.459
3.459
3.43C
3.459
8.931
8.900
4.060
3.463
3.454
3.444
4.057
4.060
3.459
3.454
4.057
8.915
3.444
~TThrflhlD
PARTS CATALOGUE
50
S CYL. 4 BBL
W/M 38 TRANS.
1970-71 FIREBIRD ACCELERATOR LINKAGE
GROUP 3.000 ILLUSTRATION 10
~flThIRD
PARTS CATALOGUE
U
1970-71 FIREBIRD ACCELERATOR LINKAGE
Key
1
—
Part Name
Group Na.
PEDAL ASM., Accelerator
PLATE, Trim
2—SCREW, Accel. Pedal Reinforcement Mtg. (1/4”—14x 1 1/2” Washer Hd.).
3 — SWITCH ASM., Downshift Control
4
—
SCREW, Switch Mtg. (1/4—14 x 1/2” Hex Washer Hd.)
S
—
REINFORCEMENT, Accel. Pedal (w/M—40 H.T.)
6
—
RETAINER, Cable to Accel. Rod
7
—
ROD ASM., Accel. Pedal
8
—
CABLE ASM., Throttle Control
9
—
PIN, Pedal to Rod
—
SPRING, Accel. Pedal Tension
10
11 — REINFORCEMENT, Accel. Pedal (cxc. M—40 H.T.)
12 — SUPPORT, Accel. Pedal Rod
13 — BRACKET, Downshift Control Cable
14 — ROD, Carl,. Lever to Accel. Control Lever (F/6)
15 — SUPPORT, Accel. Control Cable (F/6)
16— CLIP, Control Lever Rod (F/6)
17 — NUT, Solenoid Mtg. Brkt. (3/8—24)
18— BRACKET, Idle Stop Solenoid Mtg. (F/6)
19 — SOLENOID ASM., Idle Stop
20 — BOLT, Mtg. Brkt. Brace to Brkt. (1/4—20 x 1” Hex Hd.)
21 — BRACE, Idle Stop Solenoid Mtg. Brkt. (F/6)
22 — BOLT, Downshift Cant. Cable Brkt. Mtg. (3/8—16 x 2 3/4”)
23 — SPRING, Carl,. Throttle Control Return
24 —
25 —
26 —
27 —
28 —
29 —
STUD, Idler Lever
LEVER, Trans. Throttle Valve Control
LEVER ASM., Throttle Control Idler
SLEEVE, Idler Lever to Stud
RETAINER, Idler Lever CE” Ring 3/8”)
LOCKWASHER, Downshift Cont. Cable Brkt. Mtg. (3/8”)
30 — NUT, Downshift Cant. Cable Brkt. Mtg. (3/8—16)
31 — BRACKET, Idle Stbp Solenoid Mtg. (F/B)
32 — BOLT, Solenoid Mtg. (1/4—20 x 5/8”)
33 — SOLENOID ASM., Idle Stop
34— NUT, Solenoid Mtg. (1/4”—20 Spec. Locking Hex)
35 — BOLT, Carl,. Lever Extension Mtg. (1/4” —20 x 1/2”)
36 — EXTENSION ASM., Carl,. Lever
37 — WASHER, Cable to Extension (7/32” I.D. x 7/16” O.D.)
38 — COTTER PIN, Cable to Extension (1/16” x 1/2”)
39 — WASHER, Cable Mtg. Brkt. (11/32” l.D. x 3/4” O.D.)
40— NUT, Cable Mtg. Brkt. (5/16—18)
41 — BOLT, Cable Mtg. Brkt. (5/16—18 x 5/8”)
42 — BRACKET, Throttle Cant. Cable Mtg. (4 B.C.)
43 — SPRING, Throttle Cant. Return
3.451
3.451
N S.
4.057
N .5.
3.452
3.430
3.430
3.430
3.452
3.459
3.452
3.452
4.060
3.430
3.454
3.425
8.916
3.444
3.440
8.900
3.44.4
8.900
3.459
3.463
4.050
3.463
3.463
8.934
8.931
8.915
3.444
8.900
3.440
N .S.
8.900
3.454
8.929
8.938
44 —
45 —
46 —
47 —
48 —
49 —
50 —
51 —
BRACKET, Throttle Cant. Cable Mtg. (2 B.C.)
EXTENSION, Carl,. Lever
HOSE, Carb. to Vacuum Reservoir
TANK, Carl,. Vacuum Reserve
CABLE ASM., Downshift Control
CLIP, Downshift Cant. Cable to Brkt
SEAL, Downshift Cont. Cable to Trans
BRACKET, Downshift Cant. Cable
8.929
8.915
8.900
3.459
3.459
3.459
3.454
3.765
3.765
4.050
4.060
4.047
4.060
52
CLIP, Lever Rod to Carl,. (Upper Rod End) (1971)
3.430
—
53 — RETAINER, Throttle Control Cable to Dash Insulator
0 HOOP 3.000 ILLUSTRATION 11
3.430
PARTS CATALOGUE
1972-76 FIREBIRD ACCELERATOR LINKAGE (TYPICAL)
Key
Part Name
1 — CABLE ASM., Throttle Control
2 — RETAINER, Throttle Cable to Dash Insulator.
3 — ROD ASM., Accelerator Pedal
4 — REINFORCEMENT, Pedal (Exc. M-40 H.T.)
S — REINFORCEMENT, Pedal
6 — SWITCH, Downshift Control
7 — SCREW (1/4—14 x 1/2”)
8— SCREW (1/4—14 x 1”)
9 — PEDAL, Accelerator
10— PIN, Pedal Rod Clevis
11 — SPRING, Pedal Tension to Control Rod
12 — SUPPORT, Accelerator Pedal Rod
26 — ANCHOR, Throttle Control Return Spring
27 — SPRING, Throttle Control Return
28 — RETAINER, Garb, to Accel. Control Lever Rod
29 — BOLT, Brkt. to Monifold (3/8—16 x 2—3/4”)
30 — SUPPORT, Accelerator Pedal Rod
Group No.
3.430
3.430
3.431
3.452
3.452
4.057
N.E.
8.977
3.451
3.452
3.459
3.454
3.459
3.459
3.430
8.900
3.454
Key
Part Name
31 — ROD, Carl,. to Idler Lever
32 — BRACKET, Downshift Cable
33 — LOCKWASHER (3/8”)
34— NUT (3/8—16)
35 — CLIP, Carl,. to Accelerator Cant. Lever Rod
36— RING, Idler Lever Q’E” 3/8”)
37 — SLEEVE, Accel. Lever Stud
38 — LEVER, Throttle Control Idler
39 — LEVER, Trans. Throttle Valve Control
40 — STUD, Arcel. Control Lever
41 — STUD, Accel. Cable to Carb. Lever Ball
42 — NUT (il/4”—20)
43 — BRACKET, Throttle Control Cable Mtg
44 — SPRING, Throttle Control Return
45 — BRACKET, Downshift Cable
(Use w/4 1” Cable)
46 — PIN, Downshift Cable to Corb. Lever
GROUP 3.000 ILLUSTRATION 12
Group No.
3.430
4.060
8.931
8.915
3.425
8.934
3.463
3.4.63
4.050
3.463
3.452
8.915
3.459
3.459
4.060
4.060
~TTh~flRD
PARTS CATALOGUE
1967-68 FIREBIRD FUEL SYSTEM
Part Name
Key
1
2
3
—
PIPE ASM., Fuel Main (5/16” ID.)
PIPE ASM., Fuel Return (1/4” l.D.)
CLIP, Vapor Return Pipe (1/4”)
4
—
CLIP, Vapor Return Pipe
5
—
CLIP ASM., Fuel Pipe
6
—
7
—
8
—
9
10
11
12
—
—
—
—
—
—
13 —
14
CLIP, Fuel & Broke Pipe
CLIP, Vapor Return Pipe to Fuel Pipe
CLIP, Fuel Line
WIRE ASM., Fuel Tank Extension
COVER, Fuel Tank Filler Neck Tube
CAP, Fuel Tank Filler
EMBLEM, Fuel Tank Filler Door
DOOR & HINGE ASM., Fuel Tank Filler
HOSE, Fuel Tank Tube Protector
15 — RETAINER, Fuel Tank Filler Neck Tube
16 — NECK ASM., Fuel Tank Filler
17— INSULATOR, Fuel Tank Anti—Squeak
18
19
20
—
—
—
—
21 —
22 —
23 —
24 —
25 —
26 —
TANK, Fuel
INSULATOR, Fuel Tank
BOLT, Fuel Tank Supt. Strap
SPACER, Fuel Tank Supt. Strap
NUT, Fuel Tank Supt. Strap
STRAP, Fuel Tank Support
GASKET, Outlet Fittings to Tank
GAUGE ASM., Fuel (Tank Unit)
CAM, Outlet Fitting to Tank
Group No.
Key
8.964
8.96.4
N.S.
3.162
3.162
N.S.
3.162
3.162
2.480
12.945
3.028
27
12.945
12. 945
12. 945
12. 945
12.945
37
38
39
40
N.S.
3.001
N.S.
3.023
N.S.
3.023
3.022
3.112
3.107
3.107
Part Name
—
RESTRICTOR, Vapor Return Hose (400)
28 — CLAMP, Vapor Return Hose (1/2—Red)
29 — HOSE, Tank to Vapor Return Pipe
(1/4”l.D.x5—1/2”)
30 — HOSE, Tank to Fuel Pipe (5/16’ l.D.)
31 — CLAMP, Fuel Hose (9/16” Black)
32 — SLEEVE, Fuel Pipe Rear Hose
33—PIPE ASM., Fuel Pump to Carl,. (5/16” l.D.).
34 — GASKET, Fuel Pump to Timing Chain Cover
35
36
—
—
—
—
—
—
41
—
42
—
43
—
44
—
45
—
46 —
FUEL PUMP, Package
WASHER, Fuel Pump to Housing
BOLT, Fuel Pump to Hausing(5/16”—18 x 1—1/8”)
WASHER, Fuel Pump to Timing Chain Cover
BOLT, Fuel Pump to Timing Chain Cover
HOSE, Front Pipe to Rear Pipe
(5/16” I.D. x 5—3/8”)
HOSE, Fuel Pump to Front Pipe
(5/16” I.D. x 9—1/2”)
CLAMP, Fuel Hose (5/8” Green)
HOSE, Return Pipe Connector
(1/4” l.D. x 7—3/4”)
CLAMP, Vapor Return Hose
(1/2”)
HOSE, Return Pipe Connector
(1/4” l.D. x 7-3/4”)
HOSE, Fuel Pump to Fuel Pipe
(9/32” l.D. x 12—1/2”)
GROUP 3.000 ILLUSTRATION 13
Group Na.
3.163
3.162
3.163
3.163
3.162
3.163
8.964
3.904
3.900
3.901
N.S.
3.901
3.901
3.163
3.163
3.162
3.163
3.162
3.163
3.163
~W~IRD
PARTS CATALOGUE
CARBURETOR AIR CLEANERS & AIR PRE-HEATERS
1968-69 6-CYL. ENGINE 1 -BBL. CARD.
Part Name
Key
—
NUT, Air Cleaner to Carl,. (1/4—20 Wing). . . .
CLEANER & SILENCER, Carburetor Air
GASKET, Air Cleaner to Carburetor
BRACKET & PIPE ASM., Crankcase Vent
HOSE, Crankcase Vent to Air Cleaner
(3/4” l.D.x 1” O.D. x 7”)
CLAMP, Crankcase Hose to Air Cleaner & Vent
Pipe
SENSOR PKG., Air Cleaner Thermal Vacuum. . .
DIAPHRAGM PKG., Air Cleaner (On Snorkle). .
VALVE ASM., Air Cleaner Motor Vacuum Check
HOSE, Check Valve to Elbow (1-1/4” long) . . .
SCREW, Pre—Heater Shroud to Mtg. Brkt.
(#10..)6x5/8” Hex. Hd.)
DUCT, Carl,. Air Pre—Heater to Air Cleaner . . .
CLAMP, Pre—Heater Duct to Shroud—Keystone . . .
—
SHROUD ASM., Carl,. Air Pre—Heater
—
ELBOW, Air Cleaner Voc. Hose to Manifold
—
2
3
4
5
—
6
—
—
—
—
7 —
8 —
9 —
10 —
11 —
12
13
14
15
Group No.
—
8.920
3.402
3.403
1.762
1.762
1.750
3.410
3.410
3.278
8.962
8.977
3.417
3.417
3.417
. . .
3.278
1968-69 6-CYL. ENGINE 4-BBL. CARD.
Key
1
2
3
4
S
6
7
8
9
10
11
12
13
14
15
Part Name
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
NUT, Air Cleaner to Corb (1/4—20 Wing)
CLEANER & SILENCER, Carburetor Air
GASKET, Air Cleaner to Carburetor
STUD, Air Cleaner Asm. to Carburetor
(l/4”—20 x 5”)
BRACKET & PIPE ASM., Crankcase Vent
HOSE, Crankcase Vent to Air Cleaner
(3/4”I.D. x 1” O.D. x 7”).
CLAMP, Crankcase Hose to Air Cleaner &
Vent Pipe
SENSOR PKG., Air Cleaner Thermal Vacuum.
DIAPHRAGM PKG., Air Cleaner (On Snorkle)
FITTING, Air Cleaner Motor Vac. Hose
SHROUD, Carb. Air Pre—Heater — Inner
SHROUD, Carl,. Air Pre—Heater — Outer
SCREW, Carl,. Air Pre—Heater Shroud Asm. to
Exh. Manifold (#l0~16 x 5/8” Hex. Hd.) . .
CLAMP, Air Pre—Heater Duct
DUCT, Air Pre—Heoter Shroud to Air Cleaner.
GROUP 3.000 ILLUSTRATION 14
Group No.
8.920
3.402
3.403
3.403
1.762
1.762
. .
. .
. .
. .
1.750
3.410
3.410
3.278
3.417
3.417
8.977
3.417
3.4 17
T~IR1
PARTS CATALOGUE
CARBURETOR AIR CLEANERS & AIR PRE-HEATERS
1968-75 8 CYL. ENGINE 2 AND 4 BBL. CARBS.
Key
—
2
3
4
S
6
7
8
9
10
11
12
13
14
15
16
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Description
Group
SENSOR PKG., Air Cleaner Thermal Vacuum. .
HOSE, Crankcase Vent Pipe to Air Cleaner. . .
PIPE, Crankcase Vent
FITTING, Air Cleaner Vac. Hose to Manifold .
NUT, Air Cleaner to Carb. (1 4 “-2D Wing)
DIAPHRAGM PKG., Air Cleaner (On Snorkle).
CLEANER & SILENCER, Carburetor Air
GASKET, Air Cleaner to Carburetor
STUD, Air Cleaner Asm. to Carburetor
DUCT, Carl,. Air Pre—Heater to Air Cleaner . .
3.415
.
.
1.762
1.762
3.278
8.920
.
3.415
.
3.402
3.403
3.403
3.417
CLAMP, Air Pre—Heater Duct
RETAINER, Vac. Valve to Clesner
3.4 17
3.417
SHROUD ASM., Carburetor Air Pre—Heater
ELBOW, Air Preheater (Firebird)
DUCT, Air Preheater to Cleaner (Firebird)
GASKET, Air Cleaner to Vent Switch Valve
3.417
3.417
3.417
(A 861.)
17— VALVE, Thermo Purge
18— VAt \/5~ Vacuum Rresk Thermal l197~l
3.403
3.130
1
1970-75 6 CYL. ENGINE
Key
Description
1 — SENSOR PKG., Air Cleaner Thermal Vacuum .
2 — HOSE, C/case Vent & Rocker Arm Cover
3 — VALVE ASM., Crankcase Vent
4 — GROMMET, Crankcase Vent
5 — STOVE, Carb. Air Pre-Heeter
6 — STUD, Stave to Manifold
7 — SCREW, Stave to Manifold
8 — TUBE, Pre—Heater Shroud to Air Cleaner
9 — CONNECTOR, Vent Hose to Covet
10 — GROMMET, Vent Hose Connector
11 — CLAMP, Crankcase Vent Hose
12 — GASKET, Carl,. Air Cleaner
13 — STUD. Air Cleaner Assn. to Carl,
14 — ELEMENT ASM., Air Filter
15 — HOSE, Air Cleaner to Rocker Arm Cover
16 — RETAINER, Filter Element
17 — AIR CLEANER ASM., Carl,. Air
18 — DIAPHRAGM PKG., Air Cleaner (On Snorlcle)
GROUP 3.000 ILLUSTRATION 15
Group
3.415
I .762
1.745
1 .745
. .
3.417
N.S.
N.S.
3.417
.
.
1.745
I .745
1.750
3.403
3.403
3.4~D
1 .762
3.410
3.402
3.415
PARTS CATALOGUE
30
IlL. CARTER
A III.. 100556155
2 BIt.
1967-68 CRUISE CONTROL SYSTEM
GROUP 3.000 ILLUSTRATION 16
j~T~IRD
PARTS CATALOGUE
1967-68 CRUISE CONTROL SYSTEM
Key
Part Name
Group Na.
—
TEE, Cruise Control Hose Vacuum Source—3 Way
3.885
2
—
HOSE, Tee to Regulator (7/32’ x 39”)
3.885
3
—
CHAIN ASM., Cruise Control-Bead
3.885
SERVO ASM., Cruise Control Vacuum
NUT, Servo to Mounting Bracket (1/4—20)
HOSE, Tee to Servo (9/32” x 9 1 4 ‘)
3.887
8.915
3.885
3.885
4.342
4.342
4
5
6
7
B
—
—
—
9
—
REGULATOR ASM., Cruise Control
CABLE & CASING ASM., Speedometer—Upper
CABLE & CASING ASM., Speedometer—Lower
10
—
CLIP, Speedometer Cable
11
12
—
—
—
—
13 —
14 —
15 —
16 —
17 —
N.S.
STRAP, Cruise Control Switch Hose to Wire Harness
NUT, Cable Clip to Fender Skirt (5/16—18)
3.885
8.915
HOSE, Tee so Release Switch (7/32” x 53”)
SCREW, Regulator to Brkt. (1/4—20 x 1/2”)
BRACKET, Cruise Control Regulator
NUT, Regulator Bracket to Skirt (5/16”—12 ‘‘U’’ Shape)
SCREW, Regulator Bracket to Skirt (5/16—12 x 5/8”)
3.885
8.977
3.885
8.921
8.977
18— HOSE, Regulator to Tee (9/32” x 7 3/4”)
19 — TEE, Cruise Control Vacuum Hose Release Switch
20 — BRACKET ASM., Cruise Control Servo Support
21 — SCREW, Servo Bracket to Power Unit Brkt. (1/4” —20 x 1/2”)
22 — BOLT, Rocket Arm Cover
23 — BRACKET, Cruise Control Power Servo
3.885
3.885
3.885
8.977
0.413
3.885
24 — CLIP, Regulator Hose to Servo Supt. Brkt
N.S.
8.900
25
—
26 —
27 —
28 —
29 —
BOLT, Carl,. Lever Extension (1/4” —20 x 3 4”)
WASHER, Carl,. Lever Extension (11/32” 1.0. x 3/4” OD. x 3/32”)
CLIP, Bead Chain to Carb. Extension
SPRING, Throttle Control Return
EXTENSION, Carb. Lever (4 Hales) (326—2 B.C.)
2.277
3.885
3.459
3.454
30 — BOLT, Carl,. Lever Extension (1/4—20 x 5 8”)
31 — EXTENSION, Carl,. Lever (3 Holes) (326—4 B.C.)
32 — EXTENSION, Carl,. Lever (400—4 B.C.)
33 — LEVER & SWITCH ASM., Direction Signal
8.900
3,454
3.454
3.887
34
35
36
37
38
SCREW, Lever to Switch (#8~32 x 5/8”)
CLIP, Stop Light Switch to Bracket
LOCKWASHER, Striker to Pedal (5/16”)
NUT, Striker to Pedal (5/16”-18)
BOLT, Striker to Pedal (5/16—18 x 7/8”)
8.977
2.447
8.931
8.915
8.900
SWITCH ASM., Stop Light & Cruise Control Release
STRIKER, Cruise Control Vacuum Release Valve (SB.)
BRACKET, Cruise Control Vacuum Release Valve
CLIP, Release Switch to Bracket
SWITCH ASM., Cruise Control Vacuum Release
BOLT, Valve Bracket to Pedal Bracket (5 16—18 x 3 4”)
WIRE ASM., Cruise Control
2.447
3.880
3.880
3.885
3.887
8.900
3.887
—
—
—
—
—
39 —
40 —
41 —
42 —
43 —
44 —
45 —
46 — STR1KER, Cruise Control Vacuum Release Valve (P.8.)
47 — SHIELD, Cruise Cant. Engage Switch Wire (Tilt Wheel)
48— SHIELD, Cruise Cant. Engage Switch Wire (Exc. Tilt Wheel)
3.880
3.885
3.885
49
—
GROMMET, Speedo Cable Through Dash
9.775
SD
—
GROMMET, Cruise Control Regulator Bracket
—
2” Wide
GROUP 3.000 ILLUSTRATION 17
3.885
1GM
PARTS
FIREBIRD
CATALOGUE
CRUISE CONTROL REGULATOR
Key
I
(TYPICAL)
Part Name
Group Na.
1
—
GEAR, Cruise Control Speedometer
3.885
2
—
PIN, Cruise Control Speedometer Gear
3.885
3
—
VALVE BODY ASM., (w/Mognet) Regulator
3.887
4
—
HOUSING, Cruise Control Regulator
3.885
5
—
BEARING, Cruise Control Regulator Drive Screw
3.885
6
—
GEAR, Cruise Control Governor Shaft
3.885
7
—
RING, Carrier Retainer
3.885
8
—
CARRIER ASM., (w/Weight) Regulator
3.885
9
—
SHAFT, Cruise Control Governor
3.885
10 — WASHER, Cruise Control Governor
—
Spring
3.885
—
Plain
3.885
11
—
WASHER, Cruise Control Governor
12
—
RING, Cruise Control Governor Shaft Ret
3.885
13
—
BEARING, Thrust
3.885
14
—
CUP ASM., Cruise Control Actuator
3.885
15
—
SPRING, Regulator Governor
3.885
16
—
CAP, Governor Spring
3.885
17
—
SUPPORT ASM., Bearing
3.885
18
—
SPRING, Actuator Pin
3.885
19
—
SLIDE, Cruise Control Actuator Pin
3.885
20
—
RESTRICTOR, Cruise Control Regulator Variable
3.885
21
—
FILTER, Intake
3.885
22
—
COVER ASM., Regulator
3.885
—
(11 Balls)
GROUP 3.000 ILLUSTRATION 18
j~T7WThIRfl
PARTS CATALOGUE
1973-76 6 CYL. ENGINE AIR INJECTION
Ke>’
Part Name
SYSTEM
Group No.
—
PUMP, Air Injector
3.660
2
—
BRACE, Air Injector Pump
3.655
3
—
WASHER, Brace to Pump (3/8” 1.0. x 3/4” 0.0.)
8.929
4
—
LOCKWASHER, Brace to Pump (3/8”)
8.931
5—BOLT, Brace to Pump (3 8”—16x
13/8”)
8.900
6
—
LOCKWASHER, Brace to Pump (3 8”)
8.931
7
—
BOLT, Brace to Bracket (3 8”
8.900
8
—
NUT, Brace to Bracket BaIt (3/8”
9
—
BOLT, Bait to Bracket
10
—
CLIP, Air Injector Diverter Valve Signal Pipe
11
—
PIPE
3.675
12
—
HOSE, Air Injector Diverter Valve Signal Pipe
8.962
13
.-
TEE, Air Injector Diverter Valve Signal Pipe
3.680
14
—
HOSE, Tee to Diverter Valve
8.962
15
—
CLAMP, Hose to Diverter Valve (1”)
8.948
16
—
HOSE, Diverter Valve to Engine Pipe
3.675
17
—
BOLT, Valve to Adapter (1/4”
8.900
18
—
LOCKWASHER, Valve to Adapter (1/4”)
8.931
19
—
VALVE, Diverter
3.670
20
—
GASKET, Air Injector Diverter Valve
3.670
21
—
ADAPTER, Air Injector Diverter Valve to Air Pump
3.675
16 x 3/4 “)
—
—
16)
8.915
N.S.
—
20 x 3/4 “)
GROUP 3.000 ILLUSTRATION 19
N.S.
WM~IRD
PARTS CATALOGUE
1973-76 ALL 350 ENGINE AIR INJECTION SYSTEM
Key
1
—
Part Name
Group No.
3.655
PLATE, Pump Mounting
2— PUMP ASM., Air Injection
3.660
3
—
GASKET, Air Diverter Valve to Pump
3.670
4
—
VALVE, Air Diverter
3.670
5—CLAMP, Hose
1.750
6
3.675
—
HOSE, Air Diverter Valve to Check Valve
7—BOLT (1/4”-20x5/8”l
8.900
8
3.6 70
—
VALVE, Air Injection Check
8.962
9— HOSE (5/32” ID.)
10— SEAL, Air Passage Crossover Pipe “0” Ring
3.675
11
8.900
—
BOLT, (3/5”. 16 x 5/8”)
3.675
12 — PIPE, Air Passage Crossover
13 — GASKET, Air Passage
3.670
14— BRACKET, Pump Mounting
3.655
15 — WASHER, Mtg. Plate to Bracket & Cyl. Head
S.s.
16—BOLT 13/8”-16x1-1/8”)
8.900
17
N .S.
—
BOLT (3/8”-16 x 1-5/8”)
18 — SPACER, Pump Mounting
3.655
19—BOLTI5/16”-18x1-1/2”)
8.900
20 — BOLT (3/8”-16 x 4-3/4”)
N .S.
8.900
21
—
BOLT 13/8”-16 x 1-1/8”l
norsi In
3.000 II [USTRATION
~
IGM
P&RTS
FIREBIRD
C&TALOGUE
1973-74 6 CYL. ENG. EXHAUST GAS RECIRCULATION SYSTEM VALVE MOUNTING
Key
Description
8.962
HOSE, E.G.R.
E.G.R.
Group No.
VALVE,
3
CLAMP, E.G.R.
3.660
4
GASKET, E.G.R.
3.680
5
LOCK, E.G.R. Valve Clamp
3.680
6
STUD, E.G.R. Valve Clamp
3.672
—
ST.
3.670
2
GROUP 3.000 ILLUSTRATION 21
T~IRrl
rGMPARTS
CATALOGUE
TRANS AM
1969 FIREBIRD RAM AIR SYSTEM
GROUP 3.000 iLLUSTRATION 22
j~TThflIRD
PARTS CATALOGUE
1969 FIREBIRD RAM AIR SYSTEM
Key
Part Name
—
PANEL, Hood (Exc. Trans Am)
HOUSING, Inlet to Hood Valve
SEAL, Valve Housing to Hood
—
ORNAMENT, Hood Vent
—
DECAL, Hood Name “Ram Air”
—
2
3
4
S
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
50 —
51 —
52 —
53 —
54 —
55 —
56 —
57 —
58 —
59 —
60 —
61 —
62 —
63 —
64 —
65 —
Group No.
8.000
3.415
3.415
8.030
8.030
8.030
8.030
8.030
Red
“Ram Air” — White
“Ram Air” — Black
DECAL, Hood Name “Ram Air IV” - Red
-
‘‘Ram Air IV” — White
“Porn Air IV” - Black
PANEL, Hood (Trans Am)
ORNAMENt Hood Vent
DUCT, Inner Panel .
BOLT, Cable to Plate (1/4I~2Ox1/2)
WASHER, Cable to Plate (9/32” I.D. x 37/64” O.D.)
CLIP, Cable to Baffle
CABLE, Valve to Splice Brkt
VALVE, Inlet to Hood
SCREW, Bushing to Hsg.&1O—16 sr3/4t’)
..
RETAINER, Valve Shaft Bushing
BUSHING, Inlet Valve Shaft
WASHER, Ret, to Valve Hsg. (13/64” I.D. x 13/32” 0.0.)
TEE, Sensor Hose (3/16” x 3/16” x 3/16”)
GROMMET, Inlet Sensor Hose
BRACKET, Cable Mounting (2nd Type)
CONNECTOR, Cable Splice (2nd Type)
SCREW, Bracket to Baffle (1/4—20 x 5/8”)
SET SCREW, Cable to Cann. (#8~32 x 3/16”)
CONNECTOR, Inlet Vac. Hose
HOSE, All Ran Air Vacuum (5/32” I.D.)
SEAL, Baffle to Shroud (400 Exc. HO)
SEAL, Baffle to Shroud (400 HO)
SENSOR ASM., Air Inlet Thermal
SHROUD, Air Inlet (400 Exc. HO)
SHROUD, Air Inlet (400 HO)
NUT, lnlet Thermal Sensor
NUT, Shroud to Hsg
J BOLT, Shroud to Carl,. Hsg
DUCT, Preheater to Shroud — L.H. (Rasi Air IV)
CLAMP, Duct to Shroud
SHROUD, Preheater (Ram Air)
SEAL, Baffle to Hood
BAFFLE, Hood Inlet (400 HO)
BAFFLE, Hood Inlet (Ram Air)
SEAL, Cleaner Element
ELEMENT, Air Cleaner (Ram Air lll—IV—HO)
PLATE, Element Backing (Rosa Air Ill—I V—HO)
GASKET, Cleaner to Carb
CAP, Vacuum Stud. .
.
NUT, Shroud to Carl,. ki;4;’:iOi
SCREW, Plate to Baffle (1/4—20 x 5/8”)
PLATE, Element Backing
ELEMENT, Air Cleaner
SCREW, Baffle to Panel (5/16” -12 x 5/8”)
LOCKWASHER, Baffle to Panel (5/16” Ext.)
BAFFLE, Hood Inlet (400 Exc. HO)
BAFFLE, Hood Inlet (400 HO)
DIAPHRAGM, Air Cleaner
SEAL, Baffle to Hood
SHROUD, Preheater — Lower
BRACKET, Switch Harness Supt
PIPE, Crankcase Vent
DUCT, Preheater to Shroud — RH (Ram Air IV )
CLAMP, Duct to Shroud
ELEMENT, Air Filter
RETAINER, Filter Element
ELBOW, Pipe Connecting
COVER, Preheater Shroud
SHROUD, Preheater — Upper
NUT, Control to Panel
DECAL, Inlet Control
CONTROL, Air Inlet
GROMMET, Cable Thru Dash (2nd Type)
8.030
8.030
8.000
8.030
3.410
8.900
N.S.
N.S.
3.415
3.415
N.S.
3.415
3.415
N.S.
3.415
3.415
3.415
3.415
N.S.
8.975
3.415
.
GROUP 3.000 ILLUSTRATION 23
8.962
3.410
3.410
3.415
3.410
3.410
3.415
8.921
3.407
3.417
3.417
3.417
3.410
3.410
3.410
3.410
3.410
3.410
3.403
N.S.
8.921
N.S.
3.410
3.410
8.977
8.932
3.410
3.410
3.415
3.410
3.417
3.765
1.762
3.417
3.417
1.745
1.745
1.762
3.417
3.417
10.252
3.415
3.415
3.415
~7~IRD
PARTS CATALOGUE
400 RAM AIR
TRANS AM
RAM AIR
1970-74 FIREBIRD RAM AIR SYSTEM
—
400 & TRANS AM S.D.
GROUP 3.000 ILLUSTRATIoN 24 ~
TmnIRfl
PARTS CATALOGUE
1970-74 FIREBIRD RAM AIR SYSTEM
Key
—
400 & TRANS AM S.D.
Part Name
1 — NUT, Air Cleaner Retaining (1/4—20)
2 — HOSE, Vent Pipe to Air Cleaner
3 — AIR CLEANER ASM., Carburetor
4 — PIPE, Crankcase Vent
5 — GASKET, Cleaner to Carburetor
6 — SUPPORT, Air Cleaner Snorkel — RH
7 — DECAL, Hood (Ram Air)
8 — NUT, Air Intake Adopter (#10~16 “U”)
9 — ADAPTER, Ram Air Intake
10 — SCREW, Adapter to Hood Panel (#10~16 x 1/2”)
11 — BOOT, Ran Air Intake
12 — STUD, Cleaner to Carburetor
13.— SUPPORT, Air Cleaner Snorkel — LH
14 — CLAMP, Air Preheater Elbow
15 — ELBOW, Carl,. Air Preheater
16 — DUCT, Air Intake to Air Cleaner — LH
17 — CLAMP, Preheater Duct to Shroud (2 1/4” dia.)
18 — SHROUD, Carl,. Air Preheater
19 — ELBOW, Carb. Air Preheater — RH
20— SHROUD, Preheater — Upper (1970)
SHROUD, Preheater - Upper (1971)
SHRDUD, Preheater Upper (1972)
21 — SHROUD, Preheater — Lower (1970)
SHROUD, Preheater — Lower (1971)
SHROUD, Preheater Lower (1972)
22 — BRACKET, Switch Harness Support
23 — COVER, Preheater Shroud
24 — SCREW, Elbow to Cover (#8..1 8 x 3/8”)
25 — ELBOW, Air Preheater Shroud to Duct — RH
26— DUCT, Air Preheater to Air Cleaner — RH
27 — STRAP, Air Scoop Air Valve Ground
28 — WIRE, Solenoids to Valve Switch Wire
29 — SOLENOID, Air Intake Valve Actuating
30 — ROD, Intake Solenoid to Valve
31 — BUSHING, Air Intake Valve Rod
32 — CLAMP, Air Intake Solenoid Mounting
33 — SCREW, Solenoid Clamp Attaching (#10~l6 x 1/2”)
34— PIPE, Crankcase Vent
35 — AIR CLEANER ASM., Carburetor .
36 — CLIP, Air Cleaner Shroud Grounding
37 — BOLT, Idle Stop Bracket Retaining (1/4—20 x 5/8”)
38 — BRACKET, Idle Stop Solenoid Mounting
39 — SOLENOID, Idle Stop
40 — NUT, Solenoid to Bracket Retaining (1/4”—20)
41 — SHROUD, Preheater — LH — Inner
42 — SHROUD, Preheater - LH - Outer
43 — NUT, Outer Shroud to Manifold (3/8”16)
44 — SEAL, Air Intake Scoop to Hood
45 — SCOOP & ADAPTER, Air Intake
46 — TERMINAL, Adapter to Ground Strap
47 — STRAP, Adapter to Dash Ground
48 — HOSE, Drain
49 — WASHER, Air Cleaner Retaining Nut (1/4”)
50 — DIAPHRAGM PKG., Air Inlet
51 — WIRE, Air Valve Switch to Solenoid Wire
52 — SWITCH, Air Intake Valve Solenoid Actuating
53 — CLIP, Solenoid Switch Retaining
54 — CLIP, Switch to Solenoid Wire Retainer
55 — BRACKET, Air Intake Valve Switch (1970-71)
(~972)
56 — DUCT, Air Preheater to Air Cleaner
57 — LEVER, Air Intake Valve Switch Actuator (1970)
(1971)
GROUP 3.000 ILLUSTRATION 25
Group No.
8.920
1.762
3.402
1.762
3.403
3.405
8.030
8.921
3.410
8.977
3.410
3.403
3.405
1.166
3.417
3.417
3.417
3.417
3.417
3.417
3.417
3.417
3.417
3.417
4.317
3.765
3.417
8.977
3.417
3.417
N.S.
2.480
3.440
3.415
3.415
3.415
8.977
1.762
3.402
N.S.
8.900
3.4.44
3.440
8.916
3.417
3.417
8.916
3.410
3.410
N.S.
9.663
N.S.
8.932
3.415
2.480
3.415
3.885
N.S.
3.415
3.4Th
3.417
3.415
3.415
1GM
PARTS CATALOGUE
TWflR1
~l2
1974 2 BBL. PONTIAC ENGINE EMISSION COMPONENTS
GROUP 3.000 ILLUSTRATION 26
LGM
F~flRD
PARTS CATALOGUE
Key
Part Name
Group Na.
1
—
GASKET, Air Cleaner to Carb
3.403
2
—
CARBURETOR ASM., 2 Barrel
3.725
3
—
NUT, Solenoid to Bracket
3.444
4
—
WIRE, Idle Stop Solenoid
.
2.480
5—SOLENOID, Idle Stop
3440
6
—
BRACKET. Idle Stop Solenoid Mounting
3.444
7
—
TUBE, Manifold to Carb
3.603
B
—
VALVE, Dist. Spark Advance Vacuum Delay
2410
9
—
VALVE & BRACKET ASM., Dist, Vacuum Control
2 410
10 — BRACKET, Throttle Control Cable Mounting
3.459
11
3.459
—
SPRING, Throttle Control Return
12— GASKET, CarS, to Manifold
3.726
13 — FITTING. Vent Hose & Purge Valve
1.745
14
—
VALVE. Dist. Spark & E.G.R. Thermal Vacuum
3.670
15—VALVE, Thermostatic Purge
3.130
16
1.745
—
VALVE ASM., Pot. Crankcase Vent
17— GROMMET PKG., Crankcase Vent
1.745
18— HOSE, Crankcase Vent
1.762
19
3.603
—
TUBE & PLATE, Choke Heat
20 — GASKET, Choke Heat Tube Plate
21
—
STUD, E.G.R. Valve Clamp 15/16”-24 x 2-1/8”l
22
—
GASKET. E.G.R. Valve Iw/ZA, ZB, ZH & ZJ Enginesl
3.602
N.S.
3.672
23 — CLAMP, E.G.R. Valve Iw/ZA. ZE, ZH & ZJ Enginesl
3.672
24
3.672
—
WASHER, E.G.R. Valve Clamp ISquare Conel
25—NUT 15/16-241
8.915
26
—
VALVE, Exhaust Gas Recirculation IE.G.R.I
3.670
27
—
VALVE. Back Pressure Transducer
3.670
28—STUD. E.G.R. Valve Clamp (5/16”.24 x 1-1/2”I
N.S.
29— CLAMP. E.G.R. Valve
3.672
30 — GASKET, E.G.R. Valve
3.672
31
—
VALVE, Exhaust Emission Vacuum Bias
32— WASHER 113/32” ID. x 3/4” OD. x 1/8”l
3.670
N.S.
33 — BOLT, Solenoid Valve & Brkt. 13/8” Special Studl
2.408
34 — TUBE. CarS, to Manifold
3.603
35— HOSE. Vacuum 11/4” 1.0.1
8.962
1974 2 BBL. PONTIAC ENGINE EMISSION COMPONENTS
GROUP 3.000 ILLUSTRATION 27
1GM
PARTS
WflIRfl
CATALOGUE
®~ir
14
1?
1974 4 BBL. PONTIAC ENGINE EMISSION COMPONENTS
GROUP 3.000 ILLUSTRATION 28
1GM Th~1aW1
PARTS CATALOGUE
Key
Part Name
Group Na.
1
—
GASKET, Air Cleaner to Carl,
3.403
2
—
CARBURETOR ASM., 4 Barrel
3.725
3
—
WIRE, Idle Stop Solenoid
2.480
4—SOLENOID ASM., Idle Stop
3.440
5
—
VALVE, Dist. Spark Advance Vacuum Delay
2.410
6
—
VALVE & BRACKET ASM., Dist. Vacuum Control
2.410
7
—
BRACKET, Throttle Control Cable Mounting
3.459
B
—
SPRING, Throttle Control Return
3.459
9— FITTING, Vent Hose & Purge Valve
1.745
10— VALVE, Dist. Spark & E.G.R. Thermal Vacuum
3.670
11—HOSE, Crankcase Vent
1.762
12— VALVE ASM., Positive Crankcase Vent
1,745
13
—
GROMMET PKG., Crankcase Vent
1.745
14
—
GASKET, Choke Heat Tube Plate
3.602
15— TUBE & PLATE, Choke Heat
16
—
STUD, E.G.R. Valve Clamp (5/16”-24 x 1-1/2”)
3.603
N.S.
17—NUT 15/16”-241
8.915
18—WASHER, E.G.R. Valve Clamp ISquare Cone)
3.672
19 — CLAMP, E.G.R. Valve
3.672
20— VALVE, Exhaust Gas Recirculatian IE.G.R.I
3.670
21 — GASKET, E.G.R. Valve
3.672
22 — GASKET, Carb. to Manifold
3.726
23 — TUBE, Manifold to Carb
3.603
24 — TUBE, Carb. to Manifold
3.603
25— HOSE, Vacuum (1/4” ID.)
8.962
1974 4 BBL. PONTIAC ENGINE EMISSION COMPONENTS
GROUP 3.000 ILLUSTRATION 29
~ThIRD
PARTS CATALOGUE
1975-76 6-CYL. ENGINE CARBURETOR, AIR CLEANER
AND EMISSION PARTS
Key
1
—
Part Name
VALVE. EGR Cold Override
Group No.
2.408
2— GROMMET, Connector & Vent Valve
to Cover
1.745
3— CONNECTOR, Crankcase Vent to Rocker
Arm Cover
1.097
Key
Part Name
Group No.
14— SHIELD, Idle Switch Heat
3.444
15 — SWITCH ASM., Carb. Idle
3.755
16— GASKET, Cat. Heat Insulator
3.726
17— SUPPORT, Accelerator Control Cable
3.459
18 — PIPE, Actuator to Heat Solenoid
N .5.
4—COVER & COIL, Carburetor Choke
3.750
19 — ACTUATOR & ROD ASM., Exhaust Heat
3.640
5—CARBURETOR ASM
3.725
20 — BRACKET, Actuator
3.641
6— CLIP, Choke to Cat. Lever
3.425
21
3.417
7
3.403
22— GASKET, EGR Valve to Manifold
8 — STUD, Air Cleaner to Carb
3.403
23 — VALVE, Exhaust Gas Recirculation
9—CLEANER & SILENCER, Carb. Air
3.402
—
GASKET, Cat, to Air Cleaner
—
TUBE, Carb. Air Heater Stove
(EGRI
3.672
10— VALVE, Crankcase Vent
1.745
24 — STOVE, Carb. Air Heater
3.670
3.417
11
25 — SPACER, Choke to Manifold
3.752
PIPE ASM., Crankcase Vent
1.762
12— SOLENOID ASM., Exhaust Heat
3.635
13— FITTING ASM., Vacuum
3.278
—
VACUUM HOSE — SEE GROUP 8.962
GROUP 3.000 ILLUSTRATION 30
PARTS CATALOGUE
1975-76 PONTIAC EMISSION VALVES AND SWITCHES
NOTE: Refer to the Data Section for Model Years and Application.
Switch, Exhaust Heat
Valve Actuator Control
Switch, Exhaust Heat
Valve Actuator Control
Switch, EGR Valve
Vacuum Control
Group
3.647
Switch, EGR Valve
Vacuum Control
Part No. 370721
Group 3.670
Valve, EFE and EGR
Thermal Vacuum
Part No. 3031520
Group
3.670
Group
3.140
Switch, EGR Valve
Vacuum Control
Part No. 3571D0
Group 2.408
Group 3.670
Part No. 355960
Group 2408
Group 3.670
Part No. 3031386
Switch, Choke Pull-off
Part No. 3031385
Group
2.408
Group
3.670
Part No. 3031548
Group
3.750
Group
3.755
Valve, Carburetor Vacuum
Break Thermal Vacuum
Part No. 3031518
Group
3.755
Group
3.764
Switch, EGR Valve
Vacuum Control
Switch, EFE and EGR
Part No. 3031427
Group
3.670
Valve, EGR Thermal Vacuum
Part No. 3031713
Group
GROUP 3.000 ILLUSTRATION 31
3.670
PARTS CATALOGUE
1975-76 PONTIAC EMISSION VALVES AND SWITCHES
NOTE: Refer to the Data Section for Model Years and Application.
Switch, Thermal Delay
(TCS & EGR)
Valve, Distributor
Vacuum Advance
Valve, Back Pressure Transducer
Part No. 551083
Group 3.670
Part No. 6490377
Group
2.408
Group
2.410
Group
3.408
Valve, Back Pressure Transducer
Part No. 497610
Group 2.410
Valve, EGR (Typical)
Valve, Thermal Check
and Delay
Part No. 484603
Group 3.670
Part No. 17052668
Group
3.670
Valve, EGR/EFE
Vacuum Check
Part No. 413423
Group 2.408
Group 3.440
Valve, Air Injection Check
Reducer, Carburetor to
EFE/EGR Switch
I
Part No. 1251004
Group
3.680
Part No. 497853
Group 3.140
Group 3.633
GROUP 3.000 ILLUSTRATION 32
Part No. 4974265
Group
3.670
1GM
PARTS CATALOGUE
flflflRD
1975-76 COLD AIR INLET SYSTEM
6 CYLINDER ENGINE
8 CYLINDER ENGINE
Key
1
2
Deecription
DUCT, Air Inlet Flex
SCREEN, Air Intake Duct
S
SCREW, Screen to Baffle (#10-16 x ¾”)
4
SCREW, Duct to Air Cleaner (#10-16 x
5 DUCT, Air Cleaner Snorkel Adapter
Group
Key
Description
3.410
3.417
8.97 7
8.977
6
DUCT, Air Inlet Flex
7
NUT, Duct to Skirt (#10-16 “J”I
8
DUCT, Air inlet
9
DUCT, Air Inlet
3.410
GROUP 3.000 ILLUSTRATION 33
—
—
Group
3.410
•...
Front Lower
Front Upper
.. .
8.921
3.410
3.410
FIREBIRD
PARTS CATALOGUE
O.H.C. SIX-CYLINDER E
O.H.C.
EIGHT-CYLINDER SINGLE & DUAL
(DUAL SHOWN)
1967-68 FIREBIRD EXHAUST SYSTEMS
GROUP 3.000 ILLUSTRATION 34
I
~T~flRD
PARIS CATALOGUE
1967-68 FIREBIRD EXHAUST SYSTEMS
Key
Group
Description
Key
Description
EIGHT-CYLINDER EXHAUST
O.H.C. SIX-CYLINDER EXHAUST
1 BARREL CARBURETOR
FLANGE, Eshaust Pipe
PIPE, Exhaust - Front
3
PIPE, Exhaust
4
MUFFLER,
5
PIPE, Muffler Tail
EXHAUST PARTS (CONTINUED)
3.609
3.609
- Rear
Exhaust
5
3.70 1
3.705
3.6 13
B
CLAMP PKG.,
3.708
P/a”-16x 1%”)
Hanger to Pipe
1967—HANGER ASM., Exhaust
Pipe
HANGER ASSY., Exhaust Pipe
CLAMP PKG., Muffler to Pipe
HANGER ASM., Tail Pipe
CLAMP, Hanger to Pipe
SCREW, Clamp to Hanger
CLAMP PKG., Muffler to Tail Pipe
3.704
3.704
7
8
9
3.708
3.706
3.706
3.706
3.708
O.H.C. SIX-CYLINDER EXHAUST
B
4 BARREL CARBURETOR
EXHAUST PARTS
C
4
3.609
3.609
3.609
3.609
3.609
3.70 1
5
PIPE. Muffler Tail (AT.)
3.705
Muffler Tail lS.T.l
3.705
2
3
PIPE,
O
ATTACHING PARTS
A
B
C
0
F
F
BOLT,
Flange
3/a”-16x
1%”)to
Manifold
1CLAMP PKG., Front Pipe to
Intermediate Pipe
CLAMP PKG.. Hanger to Pipe
1967 HANGER ASM,, Exhaust Pipe
1968 HANGER ASSY., Exhaust Pipe
CLAMP P101., Muffler to Pipe
HANGER ASM., Tail Pipe
CLAMP, Hanger to Pipe
SCREW, Clamp to Hanger
CLAMP PKG., Muffler to Tail Pipe
3.613
3.708
3.708
3.704
3.704
3.708
E
3.706
3.706
3.706
3.708
F
EIGHT-CYLINDER EXHAUST —
SINGLE & DUAL (DUAL SHOWN)
O
EXHAUST PARTS
2
3
4
1FLANGE, Exhaust Pipe (Dual)
FLANGE, Exhaust Pipe (Dual)
PIPE, Exhaust . Front R.H.
(Dual)
PIPE, Exhaust Front - L.H.
(Dual)
PIPE, Exhaust . Front
RH.
(Dual)
PIPE, Exhaust - Front . L.H. (Dual)
PIPE, Exhaust - Front (Single)
PIPE, Exhaust . Rear (Single)
RESONATOR, Exhaust . RH. (Dual)
3.610
3.610
3.609
3.609
3.609
H
3.609
3.609
3.609
3.702
GROUP 3.000
3.702
RH.
3.609
L.H.
3.609
3.701
3.701
3.705
3.705
3.105
3.705
3.705
ATTACHING PARTS
A
—
PIPE, Exhaust . Front 119671
PIPE, Exhaust - Ftont 119681
PIPE, Enhaust . Inter. 119671
PIPE, Exhaust . Inter. 119681
PIPE, Exhaust . Rear
MUFFLER, Exhaust 125’/4 in. Long
-
L.H.
)Dua((
MUFFLER, Exhaust (Dual)
MUFFLER, Exhaust (Single)
PIPE, Muffler Tail - R.H.
(Duall
PIPE, Muffler Tail (Singlel
PIPE, Muttlet Tail . L.H. (Dual)
EXTENSION, Tail Pipe . Right
EXTENSIONTail Pipe Left
6
ATTACHING PARTS
BOLT, Flange to Matifold
E
RESONATOR, Exhaust
ID ua II
PIPE, Exhaust - Rear
ID ux II
PIPE, Exhaust - Rear
3.610
A
C
0
—
SINGLE & DUAL (DUAL SHOWN)
EXHAUST PARTS
1
2
Group
_________
—
t
—
BOLT, Flange to Manifold
(J/~ -i6x2(
BOLT, Flange to Manifold
.
RH.
Cat.907A
-
R.H.
3.613
13/a-Ibalt/s”)
BOLT, Flange to
Manifold . L.H.
STUD, Manitold to Flange - L.H.
NUT, Stud to Manifold & Flange
CLAMP PKG., Resonator to Pipe Front
CLAMP PKG., Resonator to Pipe Rear IDuall
CLAMP PKG., Hanger to Pipe
(Single)
HANGER ASM., Exhaust Pipe
ISingle & Dual) 1st Type Single
on 1967
BOLT. Bracket
NUT, Hanger to Frame - RH.
(5=~”~18l (Dual)
HANGER, Pipe & Muffler (8-Cyl.
Single( (2nd Type on 1967)
—1968 HANGER - Single
BRACKET, Pipe & Muffler Supt.
IS-Cyl. Single) (2nd Type on 19671
BRACKET, Muffler Supt. to Pipe
Brkt. (8-Cyl. Single) (2nd Type
on 19671
CLAMP PKG., Pipe to Muffler
(Dual)
CLAMP PKG., Pipe to Muffler
(Sing le)
CLAMP PKG., Muffler to Tail Pipe
(Dual)
CLAMP PKG., Muffler to Tail Pipe
(Single)
HANGER ASM., Tail Pipe - R.H.
(Single & Dual)
HANGER ASM., Tail Pipe - L.H.
(Dual)
CLAMP, Hanger to Pipe
NUT, Hanger to Frame - Left
¼”-20Blind)
SCREW, Tail Pipe Clamp
(#20-9 x 1½”)
CLAMP P1(6., Extension (Also
IncI. in Ext. Pkg.(
Exc. 400 Eng. with HO or Ram Air
With 400 Eng. HO or Ram Air
ILLUSTRATION 35
S.S.
3.613
Cat .907A
3.708
3.708
3.708
3.704
Cat.907A
3.706
3.706
3.706
3.704
3.704
3.708
3.708
3.708
3.708
3.706
3.706
3.706
3.706
3.706
3.705
1GM
PARTS CATALOGUE
TWWRD
6-CYL. 4 551.
8-CYL. DUAL
1969 FIREBIRD EXHAUST SYSTEMS
GROUP 3.000 ILLUSTRATION 36
~IRD
PARTS CATALOGUE
1969 FIREBIRD EXHAUST SYSTEMS
Desctiption
Key
Group
—
EXC. 303 ENGINE OR RAM AIR V
Key
Descriotion
O.H.C. SIX-CYLINDER EXHAUST
hRARRFI.
CARRUAPTOR
EXHAUST PARTS
1
2
3
4
5
FLANGE, Exhaust Pipe
PIPE, Exhaust . Front
PIPE, Muffler Tail
PIPE, Exhaust . Rear
MUFFLER, Exhaust
ATTACHING PARTS
A
B
C
D
E
BOLT, Flange to Manifold
(~/e”-l6 x 1%”)
CLAMP P1(0., Muffler to Tail Pipe
SUPPORT ASM., Tail Pipe
CLAMP, Tail Pipe Support
SCREW, Clamp
HANGER ASM., Exhaust Pipe
CLAMP P1(0., Muffler to Rear
Esh. Pipe
CLAMP P1(0., Tail Pipe
3.610
3.609
3.705
EXHAUST PARTS
PIPE, Exhaust Intermediate
PIPE, Muffler Tail
PIPE, Exhaust . Front
PIPE, Exhaust . Rear
MUFFLER, Exhaust
4
5
ATTACHING PARTS
A
B
C
D
E
F
BOLT,
Flange
3/t”-16x
1%”)to Manifold
1CLAMP P1(0., Mufflet to Tail Pipe
SUPPORT ASM., Tail Pipe
CLAMP, Tail Pipe Support
SCREW, Clamp
CLAMP P1(0., Front Pipe to
Intermediate Pipe
HANGER ASM., Exhaust Pipe
CLAMP P1(0., Exhaust Pipe
CLAMP P1(0., Muffler to Pipe
EIGHT CYLINDER
—
3.70 1
5
6
D
E
2
3.708
3.708
3
4
S
7
3.609
3.705
3.609
3.609
3.701
B
3.6 13
3.708
3.706
3.706
3.706
3.708
3.704
9
10
11
12
A
3.708
3.708
B
3.609
3.705
3.609
3.701
BOLT, Flange to Manifold
CLAMP P1(0., Muffler to Tail Pipe
HANGER ASM., Tail Pipe
CLAMP, Tail Pipe Support
SCREW, Clamp
STUD, Manifold to Flange
NUT, Stud to Manifold & Flange
HANGER ASM., Exhaust Pipe
CLAMP P1(0., Front to Rear Pipe
CLAMP P1(0., Exhaust Pipe to
Support
BRACKET, Exhaust Pipe Support
Upper
BRACKET, Exhaust Pipe Support
Lower
C
D
E
3.613
3.708
0
3.706
3.706
3.706
3.613
S.S.
3.704
3.708
3.708
H
3.704
I
3.704
S.S.
3.708
DUAL EXHAUST
1FLANGE, Exhaust Pipe . RH.
With 400 Eng. HO or Ram Air IV
FLANGE, Exhaust Pipe . RH.
etc. 400 Eng. with HO or
Ram Air IV
PIPE, Exhaust . Front - RH.
With 400 Eng. HO or Ram Air IV
PIPE, Exhaust - Front . RH.
etc. 400 Eng. with HO or
Ram Air IV
RESONATOR, Exhaust . RH.
PIPE, Exhaust - Rear . RH.
PIPE, Muffler . Tail . RH.
FLANGE, Exhaust Pipe - L.H.
With 400 Eng. HO or Ram Air IV
FLANGE, Exhaust Pipe - L.H.
etc. 400 Eng. with HO or
Ram Air IV
PIPE, Exhaust . Front . L.H. With 400 Eng. HO or Ram Air IV
PIPE, Exhaust . Front
L.H.
etc. 400 Eng. with HO or
Ram Air IV
RESONATOR, Exhaust
L.H.
PIPE, Exhaust . Rear . L.H.
MUFFLER, Exhaust
PIPE, Muffler Tail . L.H.
3.7 06
3.706
3.706
3.704
—
Cat .907A
EXHAUST PARTS
3.708
ATTACHING PARTS
A
B
C
CLAMP P1(0., Muffler to Rear
Eth. Pipe
EIGHT CYLINDER
SINGLE EXHAUST
PIPE, Exhaust . Front
PIPE, Muffler Tail
PIPE, Exhaust . Rear
MUFFLER, Exhaust
BOLT, Upper to Lower Bracket
NUT, Bolt to Upper & Lower
Bracket
3.613
EXHAUST PARTS
2
3
F
3.609
O.H.C. SIX-CYLINDER EXHAUST
4-BARREL CARBURETOR
1
2
3
Group
EIGHT CYLINDER — SINGLE EXHAUST
ATTACHING PARTS
ICONTINU ED)
ATTACHING PARTS
BOLT, Flange to Manifold
with 400 Eng. HO or Ram Air IV
BOLT, Flange to Manifold
etc. 400 Eng. with HO or
Ram Air IV
HANGER ASM., Rear Exh. Pipe to
Resonator
CLAMP P1(0., Eth. Pipe Hanger
SUPPORT ASM., Tail Pipe . RH.
CLAMP, Tail Pipe Support
SCREW, Clamp
CLAMP P102., Muffler to Tail Pipe
CLAMP P1(0., Muffler to Rear
Eth. Pipe
BOLT, Flange to Manifold
With 400 Eng. HO or Ram Air IV
STUD, Flange to Manifold
etc. 400 Eng. with HO or
Ram Air IV
NUT, Stud to Manifold
etc. 400 Eng. with HO or
Ram Air
CLAMP P1(0., Exhaust Pipe to
Resonator
SUPPORT ASM., Tail Pipe . L.H.
CLAMP, Tail Pipe Support
SCREW, Clamp
GROUP 3.000 ILLUSTRATION 37
3.610
3.6 10
3.609
3.609
3.702
3.609
3.705
3.610
3.6 10
3.609
3.609
3.702
3.609
3.701
3.705
Cat9O7A
3.613
3.7 04
3.708
3.706
3.7 06
3.706
3.708
3.708
Cat.907A
3.6 13
S.s.
3.708
3.706
3.706
3.706
1GM
fl~flRD
PARTS CATALOGUE
C
6 CYL. SINGLE
S CYL. SINGLE
S CYL DUAL
1970-72 FIREBIRD EXHAUST SYSTEMS
GROUP 3.000 ILLUSTRATION 38
PARTS CATALOGUE
hii4~flIRD
1970-72 FIREBIRD EXHAUST SYSTEMS
2LS2a
Description
Ke~
Key
Description
ATTACHING PARTS (CONTINUED)
SINGLE EXHAUST SYSTEM
1
2
3
BRACKET, Muffler Hanger
3.609
PIPE, Exhaust
MUFFLER, Exhaust
PIPE, Tail (19701
PIPE TAIL (1971-72)
INSULATOR, Muffler Hanger
3.70 1
3.705
SCREW, Hanger to Frame
SCREW, Upper to Lower Clamp
3.705
X 3/4”)
G
ATTACHING PARTS
A
B
EXTENSION, Pipe to Mild. (1970)
EXTENSION, Pipe to Mild. (1970-72)
RING, Pipe to Mild. Sealing
NUT, Pipe to Mild. (Ve”-16)
CLAMP, Muffler to Hanger (Upper)
CLAMP, Muffler to Hanger (Lower)
BRACKET, Muffler Hanger
INSULATOR, Muffler Hanger
C
P
SCREW, Hanger to Frame
SCREW, Upper to Lower
Clamp (Bis”-18 x 114”)
HANGER, Tail Pipe
SCREW, Hanger to Frame (~=r”-18x~/4’)
SUPPORt Muffler
BRACKET, Muffler Hanger
INSULATOR, Muffler Hanger
SCREW, Supt, to Muffler (Ns”-18 X 3/4”)
SCREW, Hanger to Frame
E
Group
CLAMP PKG., Pipe to Muffler (2’/4”I
3.609
3.609
3.611
8.9 17
3.708
3.708
3.706
3.706
3.706
8.977
3.706
8,977
3.704
3.706
3.706
8.977
3.706
3.708
HANGER, Tail Pipe
SCREW, Hanger to Frame
(Yss”1B x 2/4”)
CLAMP PKG., Pipe to Ext. (2¼”)
EIGHT CYLINDER
—
7
8
PIPE, Exhaust - Front- RH. (Ram Air)
PIPE, Exhaust-Rear- R.H.
MUFFLER, Exhaust
PIPE, Tail - RH. (All)
EXTENSION, Tail Pipe -4 Bbl.
PIPE, Exhaust- Front- L.H. (ExC.
Ram Air)
PIPE, Exhaust . Front - L.H. (Rem Air)
PIPE, Exhaust - Rear - L.H.
PIPE, Tail - L.H. (All)
9
EXTENSION
S
6
3.706
3.706
8.977
3.706
8.977
3.700
DUAL EXHAUST
PIPE, Exhaust-Front- R.H.
(Exc. Ram Air)
2
3
4
3.706
1 Tail Pipe
3.609
3.609
3.609
3,701
3.705
3.705
3.609
3.609
3.705
3.705
EIGHT CYLINDER—SINGLE EXHAUST
1
2
3
4
5
6
3.609
3.609
3.609
3.701
3.705
3.705
PIPE, Crossover
PIPE, Intermediate
PIPE, Rear
MUFFLER, Exhaust (2 Bbl.)
PIPE, Tail
EXTENSION, Tail Pipe
B
C
D
E
F
A
B
C
D
ATTACHING PARTS
A
ATTACHING PARTS
STUD, Pipe to Mild. 11970)
STUD, Pipe to Mild. 11971-72)
NUT, Pipe to Mild. I¾”-16)
CLAMP PKG., Crossover Pipe (21/2”)
CLAMP PKG., Int. to Rear Pipe 12t/4”)
SUPPORT, Muffler to Hanger
SUPPORT, Muffler - L.H. 2 Bbl. Exc.
Formula 350 (1971-72)
BRACKET, Muffler Hanger
INSULATOR, Muffler Hanger
SCREW, Hanger to Frame
SCREW, Support to Muffler
(Ns”-18 x ¾”)
CLAMP PKG., Pipe to Muffler (214”)
CLAMP, Muffler to Hanger (Upper)
CLAMP, Muffler to Hanger (Lower)
3.613
3.613
3.023
3.708
3.708
E
3.704
3.704
3.706
3.706
3.706
8.977
STUD, Pipe to Mild. (1970)
STUD, Pipe to Mild. (1971-721
NUT, Pipe to Mild.
BOLT, Pipe to Mild.
CLAMP PKG., Frt. to Rear
CLAMP PKG., Pipe to Muffler
3.6 13
3.6 13
HANGER, Tail Pipe
SCREW, Hanger to Frame
3.706
8.977
CLAMP PKG., Pipe to Ext.
SCREW, Hanger to Frame
CLAMP, Muffler to Hanger (Upper)
CLAMP, Muffler to Hanger (Lower)
BRACKET, Muffler Hanger
INSULATOR, Muffler Hanger
SCREW, Upper to Lower Clamp
3.708
3.708
3.708
3.708
x
F
3.708
3.708
3.700
GROUP 3.000 ILLUSTRATION 39
it!4”)
STUD, Pipe to Mild. (1970)
STUD, Pipe to Mild. (1971-72)
NUT, Pipe to Mild. (Exc. Ram Air)
BOLT, Pipe to Mild. (Ram Air)
3.023
8.900
3.708
3.708
3.706
3.706
8.977
3.613
3.613
3.023
8.900
~T7~IRD
PARTS CATALOGUE
N
8 CYL. DUAL
W/455 S.D.
1973 EXHAUST SYSTEMS
GROUP 3 000 III USTRATION 40
j~T~IRD
PARTS CATALOGUE
1973 EXHAUST SYSTEMS
Key
Description
Group
SINGLE EXHAUST SYSTEM
1
2
3
PIPE, Exhausn
MUFFLER, Exhaust
PIPE,TaiI
DUAL EXHAUST
3.609
3.701
3.705
ATTACHING PARTS
A
B
C
D
E
EXTENSION, Pipe to Mfld.
RING. Pipe to Mfld. Sealing
NUT (3/8”-16)
CLAMP PKG. (2-1/4”)
SUPPORT. Muffler
BRACKET, Insulator
INSULATOR, Hanger
SCREW, Brkt. to Frame
SCREW f5116”-18 x 3/4”)
CLAMP, Muffler to Hanger
(Upper)
CLAMP, Muffler to Hanger
I Lower)
SCREW. (5116”-18 x 1-1/4”)
BRACKET, Insulator
INSULATOR. Hanger
SCREW, Brkt. to Frame
HANGER, Tail Pipe
SCREW (5/16”-12 x 7/8”)
3.609
3611
B.915
3.708
3.704
3.706
3.706
3.706
8.977
3.708
PIPE, Exhaust—Front-L.H.
PIPE, Exhaust—Rear-R.H.
PIPE, Exhaust—Rear-L.H.
MUFFLER, Exhaust
PIPE, Tail-R.H.
PIPE, TaiI-L.H.
EXTENSION, Tail Pipe
A
B
C
D
E
3.609
3.609
1
3
PIPE, Rear
MUFFLER, Exhaust
P1PE, Tail
3.609
3.701
3.705
2
4
5
F
C
3.7 08
3.706
3.706
—
3
4
5
6
7
8
8.900
3.613
3.708
3.708
3.708
3.708
3.706
3.706
3.706
3.706
8.977
3.708
WITH 455 S.D.
PIPE, Exhaust—Fronn.R.H.
lw/Resonator)
PIPE, Exhaust—Front-L.H.
lw/Resonator
PIPE, Exhaust—Rear-RH.
PIPE, Exhaust—Rear-L.H.
MUFFLER, Exhaust
PIPE, Tail-R.H.
PIPE, Tail-L.H.
EXTENSION, Tail Pipe
3.609
3.609
3.609
3.609
3.701
3.705
3.705
3.705
ATTACHING PARTS
A
B
C
0
3.706
8.977
3.708
3.706
3.706
3.706
8.977
3.706
8.9 77
BOLT 13/8”-16 x 1-1/4”l
WASHER (Special)
CLAMP PKG. (2-1/4”)
CLAMP PKG. 12-1/4”)
CLAMP, Muffler to Hanger
lUpper)
CLAMP, Muffler to Hanger
I Lower)
BRACKET, Insulator
INSULATOR. Hanger
SCREW, Brkt. to Frame
SCREW I5/16”-18 x 1-7/8”)
HANGER, Tail Pipe
SCREW (5/16”-12 x 7/8”)
CLAMP PKG. (2-1/4”)
DUAL EXHAUST
PIPE,Crossover
PIPE, Intermediate
B
C
D
E
3.609
3.609
3.609
3.609
3.701
3.705
3.705
3.705
ATTACHING PARTS
8.97 7
3.706
3.706
3.708
3.706
8.977
8.900
3.613
3.708
3.708
3.708
3.708
EXC. 455 S-D.
PIPE, Exhaust—Front-RH.
1
2
BOLT 13/8”-16x1.314”I
WASHER ISpecial)
CLAMP PKG. (2-1/2”l
CLAMP PKG. (2-1/4”)
CLAMP PKG. 12-1/4”)
CLAMP, Muffler to Hanger
(Upper)
CLAMP, Muffler to Hanger
(Lower)
BRACKET, Insulator
INSULATOR. Hanger
SCREW, Brkt. to Frame
SCREW (5/16”-12 x 7/8”)
SUPPORT, Muffler
BRACKET, Insulator
INSULATOR, Hanger
SCREW. Brkt. to Frame
SCREW 15/16”-18 x 3/4”)
HANGER, Tail Pipe
SCREW (5116”-12 x 7/8”)
—
1
3.708
ATTACHING PARTS
Group
2
3
4
5
6
7
8
EIGHT CYLINDER SINGLE EXHAUST
A
Description
Key
E
BOLT f3/8”-16 x 1-1/2”)
WASHER (Special)
CLAMP PKG. (2-1/2”)
CLAMP PKG. (2-1/4”)
CLAMP, Muffler no Hanger
Wpper)
CLAMP, Muffler to Hanger
(Lower)
BRACKET. Insulator
INSULATOR, Hanger
SCREW, Brkt. to Frame
SCREW (5/16”-18 x 1-7/B”)
HANGER.TailPipe
SCREW (5/16”-12 x 7/8”)
CLAMP PKG. (2-1/4”)
GROUP 3.000 ILLUSTRATION 41
8.900
3.613
3.708
3.708
3.708
3.708
3.706
3.706
3.708
3.706
8.977
3.708
1GM
n~rIRD
PARTS CATALOGUE
6 CVI. SINGLE
8 CYL. DUAL
W/455 S.D.
1974 EXHAUST SYSTEMS
GROUP 3.000 ILLUSTRATION 42
1GM
7ThETRD
PARTS CATALOGUE
1974 EXHAUST SYSTEMS
Description
Group
Key
SIX CYLINDER SINGLE EXHAUST
1
PIPE, Exhaust
2
3
MUFFLER, Exhaust
PIPE, Tail
3.609
3.701
3.705
ATTACHING PARTS
A
B
C
D
E
EXTENSION, Pipe to Mild.
RING, Sealing
NUT 13/8”—161
CLAMPPKG.12”I
SUPPORT, Muffler
BRACKET, Insulator
INSULATOR, Hanger
SCREW (5/16”—12 x 7/8”)
SCREW (5/16”—18 x 13/16~’)
CLAMP, Muffler-Upper
CLA MP, Muffler-Lower
BRACKET, Insulator
INSULATOR, Hanger
SCREW (5/16”—12 x 7/8’~)
SCREW (5/16”—18 x 1-1/4”)
HANGER,TailPipe
SCREW (5/16”—12 x 7/8”)
3.609
3.6 11
8.9 15
3.708
3.704
3.706
3.706
8.977
3.708
3.708
3.706
3.706
8.977
8.977
3.706
8.977
DUAL EXHAUST
PIPE, Crossover
2
3
4
PIPE, Intermediate
PIPE, Rear
MUFFLER, Exhaust
PIPE, Tail
S
3.609
3.609
3.609
3.701
3.705
ATTACHING PARTS
A
B
C
D
E
F
G
STUD, Pipe to Mfld.
NUT 13/8”—16)
CLAMP PKG. (2-1/4”)
CLAMP PKG. (2-1/4”)
CLAMP PKG. (2-1/4”)
SUPPORT, Muffler
BRACKET, Insulator
INSULATOR, Hanger
SCREW (5/16”—12 x 7/8”)
SCREW IS/lW—lB x 13/16”)
CLAMP, Muffler-Upper
CLAMP, Muffler-Lower
BRACKET, Insulator
INSULATOR, Hanger
SCREW (5/16”—12 x 7/8”)
SCREW IS/i 6”—18 x 1-1/4”)
HANGER, Tail Pipe
SCREW l5/16”—12 x 7/8”)
3.613
8.9 15
3.708
3.708
3.708
3704
3.706
3.706
8.977
3.706
8.977
—
EXC. 455 S.D.
PIPE, Exhaust-Front L.H.
PIPE, Exhaust-Front R.H.
3
PIPE, Exhaust-Rear L.H.
3.609
3.609
4
PIPE, Exhaust-Rear R.H.
3.609
5
MUFFLER, Exhaust
6
PIPE, TaiI-L.H.
7
8
PIPE, TaiI-R.H.
EXTENSION, Tail Pipe
3.701
3.705
3.705
3.705
3.609
ATTACHING PARTS
A
STUD, Pipe to Mild.
NUT 13/”—16)
3.613
8.915
B
C
CLAMP PKG. 12-1/4”)
CLAMP PKG. (2-1/4”)
3.708
D
CLAMP, Muffler-Upper
CLAMP, Muffler-Lower
INSULATOR, Hanger
BRACKET, Insulator
SCREW l5/16”—12 sc 7/8”)
SCREW (5/16”—18 x 1-1/4”)
HANGER, Tail Pipe
SCREW (5/16”—12 ss 7/8”)
CLAMP PKG. 12”)
3.708
3.708
E
DUAL EXHAUST
—
PIPE, Exhaust-Front L.H.
PIPE, Exhaust-Front R.H.
PIPE, Exhaust-Rear L.H.
4
PIPE, Exhaust-Rear R.H.
5
PIPE, Tail-L.H.
6
7
8
3.708
3.706
3.706
8.977
8.977
3.706
8.977
3.708
WITH 455 S.D.
1
2
3
PIPE, Tail-R.H.
MUFFLER, Exhaust
EXTENSION, Tail Pipe
3.609
3.609
3.609
3.609
3.705
3.705
3.70 1
3.705
ATTACHING PARTS
A
B
C
D
3.708
3.708
3.705
3.706
8.977
8.977
Group
1
2
EIGHT CYLINDER SINGLE EXHAUST
1
Description
E
BOLT (3/8”—16 x 1-1/2”)
WASHER (Special)
CLAMP PKG. 12-1/2”)
CLAMP PKG. (2-1/4”l
CLAMP, Muffler-Upper
CLAMP, Muffler-Lower
BRACKET, Insulator
INSULATOR, Hanger
SCREW l5/16”—12 x 7/8”)
SCREW (5/16”—18 x 1-1/4”)
HANGER, Tail Pipe
SCREW (5/16”—12 x 7/8”)
8.900
3.613
3.708
3.708
3.708
CLAMP PKG. (2”)
3.708
GROUP 3.000 ILLUSTRATION 43
3.708
3.706
3.706
8.977
8.977
3.706
8.977
1GM
flflIRD
PARTS CATALOGUE
-3
1975 EXHAUST SYSTEMS
GROUP 3.000 ILLUSTRATION 44
I GM’
FIREBIRD
I
1975 EXHAUST SYSTEMS
Key
Description
~L2Mt
SIX CYLINDER ENGINE EXHAUST PARTS
Key
Description
Group
EIGHT CYLINDER ENGINE EXHAUST PARTS
1
PIPE, Crossover
3.609
2
CONVERTER, Catalytic
3.685
3
PIPE, Exhaust
3.609
PIPE, Tail-RH. (Trans Am &
3.705
4
MUFFLER, Exhaust
3.701
S
PIPE, Tail
3.705
400 Sport Opt.)
PIPE, Tail-L.H. lExc. Trans
3.705
5
PIPE, Tail R.H. (Exc. Trans
3.705
Am & 400 Sport Opt.)
6
Am & 400 Sport Opt.)
ATTACHING PARTS
PIPE, Tail-L.H. (Trans Am &
3.705
400 Sport Opt.)
A
B
NUT, Pipe to Manifold 13/8” -16) 3.613
SUPPORT, Cony. Hanger
3.690
HANGER, Converter
3.690
7
8
EXTENSION, Tail Pipe-R.H.
EXTENSION, Tail Pipe-L.H.
3.705
3.705
BOLTIS/16”-lBx 1”)
NUT(5/16”-18)
4.128
ATTACHING PARTS
BOLT (3/8” -16 x 1 3/8”)
NUT (3/8” - 16)
3.613
C
BOLT (3/8” -16 x 2 1/4”)
NUT 13/8” - 16)
3.613
D
CLAMP Pkg.
3.708
E
SUPPORT, Muffler
3.704
BRACKET, Muffler Supt.
3.704
INSULATOR, Supt. Brkt.
3.706
SCREW (5/16” -18 x 13/16”)
F
8.977
HANGER, Muffler
3.704
BRACKET, Muffler Supt.
3.704
INSULATOR, Supt. Brkt.
3.706
*NUT 15/16” -18)
G
VALVE, E.F.E. (A.T.)
3.130
VALVE, E.F.E. IM.T.)
3.130
STUD, Manifold-L.H.
3.275
NUT (3/8”- 16)
3.023
STUD, Manifold-R.H.
3.275
NUT 13/8” - 16)
3.023
BOLT (3/8” -16 x 11/2”)
8.900
SUPPORT, Cony. Hanger
3.690
HANGER, Converter
3.690
B
C
SCREW (5/16” -12 x 7/8”)
*DDU~ BOLT
A
BOLTIS/16”-18x 1”)
3.708
4.128
D
NUT 15/16” - 18)
BOLT (3/8” - 16 x 1 3/8”)
4.128
NUT (3/8” - 16)
3.613
BOLT(3/8”-16x21/4”)
NUT (3/8”- 16)
3.613
SCREW (5/16”- 12x 7/8”)
*CLAMP PKG. (IncI. All W/*)
8.977
HANGER, Muffler
3.704
HANGER ASM., Tail Pipe
SCREW (5/16” - 12 x 7/8”)
3.706
BRACKET, Muffler Supt.
3.704
8.977
INSULATOR, Supt. Brkt.
*~DU~~ BOLT
3.706
*NUT 15/16” - 18)
4.128
3.704
E
EIGHT CYLINDER ENGINE EXHAUST PARTS
*
3.708
SCREW 15/16”- 12 x 7/8”)
8.977
CLAMP PKG. (IncI. All W/*)
3.704
1
PIPE, Crossover
3.609
2
3
CONVERTER, Catalytic
PIPE. Exhaust
3.685
F
CLAMP PKG.
3.708
3.609
G
HANGER ASM., Tail Pipe
3.706
4
MUFFLER, Exhaust
3.701
SCREW (5/16” -12 x 7/8”)
8.977
GROUP 3.000 ILLUSTRATION 45
1GM’
FIREBIRD
n
muu’an:u
un,,p.
1976 EXHAUST SYSTEMS
6 CYL. ENGINE
8998163
369134—
CONVERTER
372247
356526
1249552
MUFFL
TAILPIPE
—
RESONATOR
739399 CLAMP UNIT
356512
—
PIPE
374218
—
2¼in.
UNIT
UNIT
374216
374218
340361
HANGER
SUPPORT UNIT
HANGER UNIT
352899 HANGER
5 CYL. ENGINE EXC. TRANS AM OR FORMULA
499792
525406
(350 ond 400
MUFFLER (455 Eng.)
MUFFLER
Eng.)
499796
TAILPIPE (R.H.)
(L.H.)
356526
—
EXHAUST
CROSSOVER
8998163
OR
1249552
UNIT
CONVERTER
RESONATOR
SUPPORT
HANGER
GROUP 3.000 ILLUSTRATION 46
UNIT
UNIT
—
2¼in.
374216
374218
HANGER
340361
UN IT
UNIT
~‘~j
PARTS
FIRECATALOGUE
BIB D]
1976 EXHAUST CHART
8 CYL. ENGINE WITH TRANS AM OR FORMULA
525371
499792
MUFFLER (350 and 400 Eng.)
525406
MUFFLER (455
Eng.)
‘I
356526
497146
—
TAILPIPE mc).
Extensions (R.H.)
525372
TAILPIPE md.
extensions (L.H.)
EXHAUST
CROSSOVER
8998163
CONVERTER
1249552
RESONATOR
OR
739399
374218
352B9B
352899
CLAMP UNIT
SUPPORT UNIT
HANGER UNIT
SUPPORT
HANGER
GROUP 3.000 ILLUSTRATION 47
HANGER
340361
—
374216
374218
SUPPORT UNIT
HANGER UNIT

Similar documents

1967 - 1976 Firebird Parts and Illustration Catalog

1967 - 1976 Firebird Parts and Illustration Catalog 15 — GASKET, Wiper Motor to Shroud 16 — MOTOR ASM., Windshield Wiper 17— SCREW & WASHER, Wiper Motor to Shroud 18 — PUMP PKG., Windshield Washer 19 — RETAINER, Engine Wire Harness 20 — HOSE, Pump t...

More information