fire protection and waterworks hangers
Transcription
fire protection and waterworks hangers
CCTF OAKVILLE 1387 CORNWALL ROAD OAKVILLE, ONTARIO L6J 7T5 TOLL FREE: 1-888-399-2283 TEL: 905-842-2283 FAX: 905-842-1466 www.cctf.com CCTF EDMONTON 5407 - 53 AVENUE N.W. EDMONTON, ALBERTA T6B 3G2 TOLL FREE: 1-800-661-3633 TEL: 780-463-8700 FAX: 780-463-7433 www.cctf.com CCTF DELTA #4 - 480 AUDLEY BLVD. ANNACIS BUSINESS PARK DELTA, B.C. V3M 5S4 TEL: 604-540-6177 FAX: 604-540-2836 www.cctf.com CCTF LOOKING BACK AND BEYOND General Terms And Conditions CCTF was incorporated in Canada in 1952 as Clyde Tube Forging, a manufacturer of butt weld fittings originally from Scotland. EMCO Limited purchased the company in 1954. The new management immediately began broadening its sales base by distributing other complementary industrial piping products in a Master Distributor capacity. Today CCTF is Canada’s largest master distributor of industrial piping products. CCTF operates from a national network of three service centres located in Oakville Ontario, Edmonton Alberta, and Delta British Columbia. With over 150,000 square feet of warehouse space and a combined total of 25 acres of outside yard space, CCTF has all of the combined components required by such a master distributor. Catalogue Weights, Dimensions, and Design Loads 1) Material and Design 2) Supplier Relations Our focus on quality has long impacted our procurement policies and the suppliers we partner with. CCTF has chosen to represent many of the world’s leading manufactures of industrial piping products. Product Breadth With well over 6,000 products SKU items in our inventory system today, CCTF offers an ever growing array of both carbon steel and stainless steel industrial piping components. CCTF continues to pro-actively “SHOP THE WORLD” in search of new products and suppliers and will continue to add new lines to our offering in the years to come. Service CCTF’s commitment to service is a commitment to our customers and their needs. Some of our service centres operate on a staggered two-shift basis, that provides our customers with faster deliveries and longer working days in which to access our inventories. Our sales people are always available for emergency services if required. With this winning combination we can provide the service our customers demand. With all of these customer benefits its no wonder that we have become known as “THE INDUSTRIAL CHOICE” for piping products in Canada. Product designs and materials are subject to change without notice. Defective Materials 3) Going in to the next century, CCTF’s market leading position is underpinned by four main strengths: Quality Assurance Systems With a manufacturer’s pedigree in previous years, CCTF has long been known for it emphasis on Quality Systems and Products. Today CCTF can be found on the majority of corporate product approval lists across Canada, and we continue to identify the products we sell with the CCTF logo wherever practical. CCTF is able to offer all of its customers the assurance of our ISO 9002-94 registered QA program in all of our facilities. Catalogue weights and dimensions are careful estimates, but not guaranteed. Load designs are calculated on test results of samples after being submitted or by calculations of static load applications. We will replace any material, which we find at our discretion to be defective in material or workmanship, provided that it has been used for the purpose intended. Our obligation with respect to material found by us to be defective shall be limited to replacement of the defective product only. In no event shall we pay for labor, installation costs, travel or any other expense for defective products. Taxes 4) All prices quoted for product in this catalogue do not include any Provincial, Federal, State, or Foreign Country taxes. All taxes are to be added to any price received from us. Delays in Delivery 5) CCTF shall not be responsible for any delay in shipping products due to fires, strikes, acts of god, delays in transportation, or labor situations that are beyond our control. In the event of such a delay our shipping date to you shall be extended for the period equal to the time lost by such a delay. Returns 6) No goods purchased from CCTF may be returned for credit without receiving an R.G.A. number from us first. All goods returned to us for credit must have been originally purchased from CCTF Any goods returned to us that are found not to be supplied by us will no be considered for credit. Any goods returned to us for credit must be in a re-salable condition in order to receive any credit. Short Shipment 7) Claims for short shipment of product must be received by us in writing within 10 days of receipt of your shipment. Minimum Invoice Charge 8) There is a minimum $50.00 Invoice charge applicable for all hanger products. Master Distributor 9) CCTF is a Master Distributor and a material supplier and not a construction sub-contractor. We assume no responsibility for any terms, conditions, or special provisions contained in any contract between the purchaser and any other party. CCTF DELTA BRITISH COLUMBIA BRANCH OFFICE 45,000 SQ. FT. WAREHOUSE 5 ACRE PIPE YARD QUALIFIED STAFF STOCKING SIZE RANGE 1/2” to 36” CCTF DELTA OVER 6000 SKU ITEMS #4 - 480 AUDLEY BLVD. ANNACIS BUSINESS PARK DELTA, B.C. V3M 5S4 TEL: 604-540-6177 FAX: 604-540-2836 www.cctf.com 1 CCTF EDMONTON ALBERTA BRANCH OFFICE 60,000 SQ. FOOT WAREHOUSE QUALIFIED STAFF STATE OF THE ART WAREHOUSE 14 ACRE PIPE YARD OVER 6,000 SKU ITEMS CCTF EDMONTON 5407 - 53 AVENUE N.W. EDMONTON, ALBERTA T6B 3G2 TOLL FREE: 1-800-661-3633 TEL: 780-463-8700 FAX: 780-463-7433 www.cctf.com 2 CCTF OAKVILLE ONTARIO BRANCH OFFICE 50,000 SQ. FOOT WAREHOUSE 6ACRE PIPE YARD QUALIFIED STAFF STATE OF THE ART WAREHOUSE CCTF OAKVILLE 1387 CORNWALL ROAD OAKVILLE, ONTARIO L6J 7T5 TOLL FREE: 1-888-399-2283 TEL: 905-842-2283 FAX: 905-842-1466 www.cctf.com STOCKING SIZE RANGE 1/2” to 36” 3 NEW HANGER COMPARISON LIST GUIDE DESCRIPTION CCTF# GRINNELL TAYLOR MYATT ADJ. SWIVEL BAND HANGER ADJ. SWIVEL BAND HANGER COPPER ADJ. SWIVEL BAND HANGER EPOXY LIGHT DUTY CLEVIS HANGER LIGHT DUTY CLEVIS HANGER EPOXY LIGHT DUTY CLEVIS COPPER STANDARD CLEVIS HANGER STANDARD CLEVIS HANGER SS MATERIAL STANDARD RISER CLAMP SHORT TONGUE RISER CLAMP COPPER RISER CLAMP MALLEABLE IRON C CLAMP 2 HOLE PIPE STRAP MALLEABLE IRON SLIT RING HANGER HEAVY DUTY SHORT STRAP OFFSET PIPE CLAMP ONE HOLE PIPE CLAMP SOLID COPPER PIPE STRAP E.I. 100 E.I. 250 C E.I. 275 E E.I 210 E.I. 280 E E.I. 310C E.I. 235 E.I. 235SS E.I. 150 E.I. 322 E.I. 325 C E.I. 410 E.I. 50 E.I. 129 E.I. 58 E.I. 500 E.I. 132 E.I. 48 69 CT 69 69 C 65 56 41 42 43 22 56 41 42 34 122 260 24 124 261 82 83 84 301 45 38 R 46 182 AFCON SWAY BRACE AFCON THREADED ATTACHMENT END AFCON 9/16" SWAY BRACE AFCON LOCKING END ATTACHMENT AFCON 4 WAY SWAY BRACE AFCON RETAINING STRAP AFCON RETRO REATAING STRAP AFCON C.P.V.C. HANGER AFCON C.P.V.C. SIDE MOUNT HANGER AFCON C.P.V.C. SINGLE FASTENER -H AFCON C.P.V.C. SINGLE FASTENER AFCON THREADED SIDE BEAM AFCON TAPPED SIDE BEAM AFCON TAPPED CEILING FLANGE STANDARD TOP BEAM CLAMP WIDE MOUTH TOP BEAM CLAMP UNDERGROUND BELL CLAMP HOOK TIE BOLT FOR WATERWORKS CLEVIS HANGER FOR D.I. PIPE E.I. 001 E.I. 070 E.I. 072 E.I.077 E.I. 079 E.I. 160 E.I. 162 E.I. 510 E.I. 511 E.I. 512 E.I.513 E.I. 551 E.I. 552 E.I. 610 E.I. 375 E.I. 400 E.I. 122 E.I. 126 E.I. 920 PIPE ROLLER ONLY ADJUSTABLE SOCKET ENDS STANDARD ROLLER HANGER STANDARD ROLLER CHAIR SINGLE PIPE ROLL COMPLETE ADJUSTABLE PIPE ROLL SUPPORT STANDARD 2 BOLT PIPE CLAMP STAINLESS STEEL 2 BOLT PIPE CLAMP HEAVY 2 BOLT PIPE CLAMP LIGHT DUTY 3 BOLT PIPE CLAMP STANDARD 3 BOLT PIPECLAMP ZINC PLATED STANDARD U BOLT BLACK STANDARD U BOLT E.I.320 E.I. 46 E.I. 466 E.I. 469 E.I. 494 E.I. 497 E.I. 125 E.I. 125 SS E.I. 430 E.I. 56 E.I. 62 E.I. 175 E.I. 475 4 C.T. 121 86 231 138 R 262 103 126 44 182 586 163 129 162 170 160 O1F 70 F 72F 77F 79F 416 62F 50F 51F 52F 53F 92 93 600 406 407 35 406 407 175 425 173 171 A 181 175 171 177 212 92 255 93 94 95 255 264 261 31 133 295 33 33 M 134 135 136 137 14 414 216 NEW HANGER COMPARISON LIST GUIDE DESCRIPTION CCTF# LIGHT DUTY U BOLTS LIGHT DUTY U BOLTS STANDARD STAINLESS STELL U BOLT FORGED STEEL TURNBUCKEL FORGED STEEL CLEVIS WELDLESS EYE NUT PIPE COVERING PROTECTION SADDLES INSULATION PROTECTION SHIELD E.I. 175L E.I. 475 L E.I. 175 SS E.I. 333 E.I. 339 E.I. 344 E.I. 80-95 E.I. 203 STANDARD PIPE STAYS EXTENDED PIPE STAYS SIDE BEAM BRACKET WELDED BEAM BRACKET CEILING FLANGE 1 5/8" X 1 5/8" STRUT 1 5/8" X 7/8 STRUT STRUT NUTS W/ SPRING STRUT NUTS L SPRING STRUT CLAMPS FOR PIPE STRUT CLAMPS FOR O.D. TUBING 90* ANGLE BRACKET 2 HOLE FLAT PLATE Q DECK HANGER E.I. 240 E.I. 245 E.I. 350 E.I. 330 E.I. 22Z E.I. U 927 E.I. U 928 E.I. U 929 E.I. U 930 E.I. U 931 E.I. U 932 E.I. U 933 E.I. U 934 E.I. U 935 THREADED ROD BLACK THREADED ROD ZINC PLATED THREADED ROD STAINLESS STEEL COACH SCREW RODS ROD COUPLING MACHINE THREAD RODS WELDED EYE ROD HANGER ROD SWIVEL NUT HEX NUT WASHERS DRIVE SCREWS E.I. 925 E.I. 926 E.I. 926SS E.I. 425 E.I. 450 E.I. W 921 E.I. W 922 E.I. W 923 E.I. 01/02 E.I. 03 E.I.04 E.I. 05 5 GRINNELL TAYLOR 120 230 299 290 MYATT 402 68 63 64 475 470 480 32 32 206 66 128 R 67 28 R 326 326 542 531 534 142 135 E 61 62 461 463 Contents CCTF DELTA BRITISH COLUMBIA BRANCH OFFICE .................................................................................... 1 CCTF EDMONTON ALBERTA BRANCH OFFICE .......................................................................................... 2 CCTF OAKVILLE ONTARIO BRANCH OFFICE .............................................................................................. 3 HANGER COMPARISON LIST .......................................................................................................................... 4 PICTORIAL INDEX ............................................................................................................................................ 8 ZINC PLATING PROCESS ................................................................................................................................ 13 STANDARD & COMMERCIALPIPE HANGERS ............................................................................................. 17 EI 100 Adjustable Swing Ring Hanger ................................................................................................................ 19 EI 250 – C Copper Plated Swivel Ring Hanger ................................................................................................... 20 EI 275E Epoxy Coated Swivel Ring Hanger ....................................................................................................... 21 EI 210 Light Duty Clevis Hanger ....................................................................................................................... 22 EI 280E Light Duty Epoxy Coated Clevis Hanger .............................................................................................. 23 EI 310 C Light Duty Copper Clevis Hanger ........................................................................................................ 24 EI 235 Standard Clevis Hanger ........................................................................................................................... 25 EI 235 SS Stanless Steel Standard Clevis Hanger ................................................................................................. 26 EI 150 Standard Riser Clamp ............................................................................................................................. 27 EI 322 Short Tongue Riser Clamp ...................................................................................................................... 28 EI 325 C Copper Plated Riser Clamp .................................................................................................................. 29 EI 410 C-Clamp ................................................................................................................................................. 30 EI 50 Zinc Plated 2- Hole Pipe Strap ................................................................................................................. 31 EI 129 Split Ring Hanger ................................................................................................................................... 32 EI 58 Heavy Duty Black ShortStrap ................................................................................................................... 33 EI 500 Offset Pipe Clamp ................................................................................................................................... 34 EI132 One Hole Clamp ..................................................................................................................................... 35 EI 48 Solid Copper Pipe Strap c/w nails .............................................................................................................. 36 FIRE PROTECTION AND WATERWORKS HANGERS .................................................................................. 37 EI 100 Adjustable Swing Ring Hanger ................................................................................................................ 39 EI A 001 Sway Brace ......................................................................................................................................... 40 EI A 070 Attachment End Threaded ................................................................................................................... 41 EI A 072 Straight Attachment End - Threaded .................................................................................................. 42 EI A 077 Locking Attachment End ..................................................................................................................... 43 EI A 079 4 - WaySway Brace Attachment .......................................................................................................... 44 EI A 160 Retaining Strap .................................................................................................................................... 45 EI A 162 Retro Retaining Strap ........................................................................................................................ 46 EI A 510 C.P.V.C. Pipe Hanger .......................................................................................................................... 47 EI A 511 C.P.V.C. Pipe Hanger Side Mount ....................................................................................................... 48 EI A 512 C.P.V.C. Pipe Hanger Single Fastener ................................................................................................... 49 EI A 513 C.P.V.C. Pipe Hanger Single Fastener ................................................................................................... 50 EI A 551 Threaded Side Beam Connector ........................................................................................................... 51 EI A 552 Tapped Side Beam Connector ............................................................................................................. 52 EI A 610 Ceiling Plate ......................................................................................................................................... 53 EI 375 Top Beam Clamp .................................................................................................................................... 54 EI 400 Wide Throat Top Beam Clamp ................................................................................................................ 55 EI 122 Bell Clamp for Waterworks ..................................................................................................................... 56 EI 126 HookTie Bolt for Waterworks Fittings ................................................................................................... 57 EI 920 Clevis Hanger for Ductile Iron Pipe ......................................................................................................... 58 INDUSTRIAL HANGERS AND CLAMPS ....................................................................................................... 59 EI 320 Pipe Roller ............................................................................................................................................... 61 6 EI 46 Adjustable Socket End .............................................................................................................................. 62 EI 466 Standard Roller Hanger .......................................................................................................................... 63 EI 469 Standard Roller Chair ............................................................................................................................ 64 EI 494 Single Pipe Roll ....................................................................................................................................... 65 EI 497 Adjustable Pipe Roller Support ................................................................................................................ 66 EI 125 Standard 2-Bolt Pipe Clamp .................................................................................................................... 67 EI 430 Heavy Duty 2-Bolt Pipe Clamp ............................................................................................................... 68 EI 125SS Standard 2-Bolt Pipe Clamp Stanless Steel ........................................................................................... 69 EI 235SS Stainless Steel Standard Clevis Hanger ................................................................................................. 70 E I 56 3-Bolt Light Duty Pipe Clamp .................................................................................................................. 71 EI 62 Std. 3-Bolt Pipe Clamp ............................................................................................................................. 72 E I 475 Standard U-Bolts Black ........................................................................................................................... 73 E I 475 L Light U-Bolts Black ............................................................................................................................. 74 EI 175 Standard U-Bolts Zinc Plated ................................................................................................................. 75 EI 175 L Light U-Bolts Zinc Plated ..................................................................................................................... 76 EI 175SS U-Bolts Stainless Steel .......................................................................................................................... 77 EI 333 Turnbuckle ............................................................................................................................................. 78 EI 339 Forged Steel Clevis .................................................................................................................................. 79 EI 344 Weldless Eye Nut .................................................................................................................................... 80 EI 80/84 Pipe Protection Saddle 1”and 1 1/2” .................................................................................................... 81 EI 88/90 Pipe Protection Saddle 2” and 2 1/2” ................................................................................................... 82 EI 92/95 Pipe Protection Saddle 3”and 4” .......................................................................................................... 83 EI 203 Insulation Protection Shield .................................................................................................................... 84 HANGERS ATTACHMENTS AND STRUT PRODUCTS ................................................................................ 85 EI 240 Standard Pipe Stay .................................................................................................................................. 87 EI 245 Extended Pipe Stay ................................................................................................................................. 88 E I 350 Side Beam Bracket .................................................................................................................................. 89 EI 330 Heavy Duty Beam Attachment ................................................................................................................ 90 EI 330 B Heavy Duty Beam Attachment ............................................................................................................. 91 E I 22 Z Zinc Plated Ceiling Flange .................................................................................................................... 92 EI U927 Strut Channel (1 5/8 x 1 5/8) ................................................................................................................ 93 EI U928 Strut Channel (1 5/8 x 7/8) ................................................................................................................... 94 EI U929 Spring Nut with Spring ......................................................................................................................... 95 EI U930 Spring Nut less Spring ........................................................................................................................... 96 EI U931 Strut Clamp for Pipe ............................................................................................................................. 97 EI U932 Strut Clamps for O.D. Tubing............................................................................................................... 98 EI U933 90º Angle Bracket ................................................................................................................................. 99 EI U934 2-Hole Flat Plate ................................................................................................................................. 100 EI U935 Q Deck Hanger ................................................................................................................................... 101 THREADED PRODUCTS ............................................................................................................................... 103 EI 925 All Threaded Rod Black ........................................................................................................................ 105 EI 926 All Threaded Rod Zinc Plated ............................................................................................................... 106 EI 926 All Threaded Rod Stainless Steel ........................................................................................................... 107 E I 425 Coach Screw Rod ................................................................................................................................ 108 E I 450 Steel Rod Couplings ............................................................................................................................. 109 EI W921 Machine Thread Rods Left and Right Threads ................................................................................. 110 EI W922 Welded Eye Rod Right Hand Thread ................................................................................................ 111 EI W923 Hanger Rod Right Hand Thread ...................................................................................................... 112 EI 01/02 Swivel Nuts ....................................................................................................................................... 113 EI 03 Hex Nuts ................................................................................................................................................. 114 EI 04 Washer .................................................................................................................................................... 115 EI 05 Wood Drive Screws ................................................................................................................................. 116 7 PICTORAL INDEX SECTION “A” STANDARD PIPE HANGERS EI 100 Adj. Band Hanger page 19 EI 250C Adj. Band Hanger Copper Plated page 20 EI 275E Adj. Band Hanger Epoxy Coated page 21 EI 235 Standard Clevis page 25 EI 235SS Standard Clevis Stainless Steel page 26 EI 210 Light Duty Clevis Hanger page 22 EI 280E Light Duty Clevis Epoxy Coated page 23 EI 310C Light Duty Clevis Copper Coated page 24 EI 150 Standard Riser Clamp page 27 EI 322 Short Tongue Riser Clamp page 28 EI 325C Standard Riser Clamp Copper Plated page 29 EI 410 C-Clamp page 30 EI 129 Split Ring Hanger page 32 EI 58 Heavy Duty Short Strap page 33 EI 500 Offset Pipe Clamp page 34 EI 132 One Hole Pipe Clamp page 35 8 EI 50 Two Hole Pipe Strap page 31 EI 48 Solid Copper Pipe Strap page 36 PICTORAL INDEX SECTION “B” FIRE PROTECTION AND WATERWORKS EI 100 Adj. Band Hanger page 39 EIA077 AFCON Locking End Attachment page 43 EIA511 AFCON C.P.V.C. Side Mount Hanger page 48 EIA610 AFCON Tapped Ceiling Flange page 53 EIA079 AFCON 4 Way Sway Brace page 44 EIA512 AFCON C.P.V.C.Single Fastener-H page 49 EI 375 Top Beam Clamp page 54 EIA001 AFCON Sway Brace Model E page 40 EIA160 AFCON Retaining Strap page 45 EIA513 AFCON C.P.V.C.Single Fastener page 50 EI 400 Wide Throat Top Beam Clamp page 55 9 EIA070 AFCON Threaded Attachment End page 41 EIA162 AFCON Retro Retaining Strap page 46 EIA551 AFCON Threaded Side Beam page 51 EI 122 Bell Clamp for Waterworks page 56 EIA072 AFCON 9/16” Sway Brace page 42 EIA510 AFCON C.P.V.C. Hanger page 47 EIA552 AFCON Tapped Side Beam page 52 EI 126 Tie Bolt page 57 PICTORAL INDEX SECTION “B” CONTUNUED SECTION “C” INDUSTRIAL PRODUCTS EI 920 Clevis Hanger for D.I. Pipe page 58 EI 469 Standard Roller Chair page 64 EI 125SS Standard 2- Bolt Pipe Clamp Stainless Steel page 69 EI 475L Light Duty U-Bolts Black page 74 EI 320 Pipe Roller page 61 EI 494 Single Pipe Roll Complete page 65 EI 235SS Standard Clevis Stainless Steel page 70 EI 175 Standard U-Bolts Zinc Plated page 75 EI 497 Adj. Pipe Roll Support page 66 EI 56 Light Duty 3-Bolt Pipe Clamp page 71 EI 175L Light U-Bolts Zinc Plated page 76 EI 46 Adj. Socket Ends page 62 EI 125 Standard 2- Bolt Pipe Clamp page 67 EI 62 Standard 3-Bolt Pipe Clamp page 72 EI 175SS Standard U-Bolts Stainless Steel page 77 10 EI 333 Turnbuckle page 78 EI 466 Standard Roller Hanger page 63 EI 430 Heavy Duty 2-Bolt Pipe Clamp page 68 EI 475 Standard U-Bolts Black page 73 EI 339 Forged Steel Clevis page 79 PICTORAL INDEX SECTION “C” CONTINUED SECTION “D” HANGER ATTACHMENTS AND STRUT PRODUCTS EI 344 Weldless Eye Nut page 80 EI 80-95 Pipe Protection Saddles page 81-83 EI 240 Standard Pipe Stay page 87 EI 245 Extended Pipe Stay page 88 EI 22Z Ceiling Flange Zinc Plated page 92 EIU927 Strut Channel (1 5/8 x 1 5/8) page 93 EIU931 Strut Clamps for Pipe page 97 EIU932 Strut Clamps for O.D. Tubing page 98 EI 203 Insulation Protection Shield page 84 EI 350 Side Beam Bracket page 89 EIU928 Strut Channel (1 5/8 x 7/8) page 94 EIU933 90º Angle Bracket page 99 11 EI 330 Heavy Duty Beam Attachment page 90 EIU929 Spring Nut with Spring page 95 EIU934 2-Hole Flat Plate page 100 EI 330B Heavy Duty Beam Attachment page 91 EIU930 Spring Nut less Spring page 96 EIU935 Q Deck Hanger page 101 PICTORAL INDEX SECTION “E” THREADED PRODUCTS EI 925 All Threaded Rod Black (10’ lengths) page 105 EI 425 Coach Screw Rods page 108 EIW923 Hanger Rod Right Hand Thread page 112 EI 926 All Threaded Rod Zinc Plated (10’ lenghts) page 106 EIW921 Machine Thread Rods page 110 EI 450 Steel Rod Couplings page 109 EI 03 Hex Nuts page 114 EI 01/02 Swivel Nut page 113 EI 05 Wood Drive Screws page 116 12 EI 926SS All Threaded Stainless Steel (10’ lenghts) page 107 EIW922 Welded Eye Rod Right Hand Thread page 111 EI 04 Washers page 115 ZINC PLATING PROCESS Tank 1 Tank 2 Tank 3 Tank 4 Tank 5 Tank 6 THE PROCESS TANK 1 TANK 2 TANK 3 TANK 4 TANK 5 TANK 6 Rust removal by industrial chlorhydric acid and oil removal with lye. Rinsing with water after oil and rust removal. Product is placed in the roller for zinc coating. Second rinse in water. Passivation by chrome acid to produce sealing coat. Finished product is then air dried. WELDING FEATURES As in any welding situation, proper ventilation must be in place so that when welding , any fumes containing impurities are not inhaled. Before welding any C.C.T.F. zinc plated pipe hangers, please check your local Workers Compensation Board welding procedures manual for ventilation requirements 13 Q U A L I T Y CCTF is engaged in the supply and distribution of pipe, pipe hangers, fittings, flanges and valves of various types and for a wide range of applications. Many CCTF products are installed by the power generation, petrochemical and process industries for which the governing codes and standards require considerable control, inspection and testing to verify the quality characteristics. To deal with these challenges, CCTF has implemented a quality program to the degree necessary to satisfy the contractors and owners, with emphasis put on areas such as review, purchasing, inspection and corrective / preventative action. CCTF has established and maintains a documented Quality Management System in an effort to conform to product jurisdiction, customer requirements, and affect a continuous Quality Improvement Program. The Quality Management System reflects the philosophy and policy of CCTF in achievement of Total Quality and is designed to meet the requirements of ISO 90021994 Quality Standards. CCTF’s experience in supplying significant projects demanding consistent quality products include Hibernia, Sable Offshore Energy Project, Terra Nova Alliance Project and the Irving Refinery Project. I S O 9 0 0 2 - 9 4 14 15 STANDARD & COMMERCIAL PIPE HANGERS Pipe hangers offered in this section are designed to support insulated or non- insulated pipe allowing for vertical adjustment and limited movement in the piping system. Material: Carbon steel, malleable iron, 304, and 316 stainless steel are used in the manufacturing of these pipe hangers. Other materials are also available. Finishes: Our standard hangers are supplied with an Electro-Galv. Zinc Coat. Some hangers may be supplied with a standard oil coated finish that is regularly referred to in the industry as BLACK. Other coatings available are hot dipped galvanized, standard Zinc Oxide primer or painted to your specifications. When hot dipped galvanized is ordered standard ZINC plated threaded parts will be supplied unless you request differently. Approvals: Some items in this section are Underwriters Laboratory Listed and Factory Mutual Approved. All other items comply with Manufacturers Standardization Society MSS SP-69. EI 100 Adjustable Swing Ring Hanger Material: Pre Galvanized Carbon Steel Applicaticion: Used for all general purpose and fire protection lines. The knurled nut allows for hanger alignment and adjustment after installation. Approvals: Underwriters Laboritory Listed, Factory Mutual Approved. Complies with Manufactures Standardization Society. Ordering: Specify figure number and pipe size. STANDARD PIPE HANGERS EI 100 ADJUSTABLE BAND HANGERS SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 “A” mm 13 19 25 32 38 50 64 76 89 102 127 152 203 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 “B” mm 10 10 10 10 10 10 10 10 10 10 13 13 13 3-1/4 3-3/8 3-3/4 4 4-1/4 4-13/16 6 6-3/8 7-1/4 7-5/16 9-1/8 9-7/16 12 “C’ mm 83 87 95 102 108 122 154 162 184 186 232 240 305 2-11/16 2-3/4 3 3-1/8 3-1/8 3-1/2 4-1/4 4-3/8 4-5/8 4-13/16 5-1/4 5-3/4 7-1/4 19 “D” mm 68 70 76 79 79 89 108 111 117 122 133 146 184 1-3/8 1-3/8 1-15/32 1-15/32 mm 35 35 37 37 1-15/16 1-5/8 1-1/2 1-1/2 1-11/16 2 2-7/16 2-3/4 37 41 38 38 43 50 62 70 Design Loads lbs kg 750 340 750 340 750 340 750 340 750 340 750 340 850 386 1050 476 1500 2000 2650 4050 680 907 1202 1837 EI 250 – C Copper Plated Swivel Ring Hanger Copper electroplated Carbon Steel. Application : Designed for supporting non – insulated copper pipe lines. Swivel nut allows for vertical adjustment in order to level pipe. Ordering : Specify figure number and pipe size. STANDARD PIPE HANGERS Material: EI 250C ADJUSTABLE BAND HANGER COPPER PLATED SIZE mm 1/2 13 3/4 19 1 25 1-1/4 32 1-1/2 38 2 50 2-1/2 64 3 76 4 102 “A” 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 “B” “C’ mm mm 10 3-1/8 79 2-11/16 10 3-1/4 83 2-3/4 10 3-3/8 87 3 10 3-3/4 95 3-1/8 10 4 102 3-1/8 10 4-1/4 108 3-1/2 13 6-11/16 119 4-1/4 13 5-1/2 140 4-3/8 13 6-7/16 164 4-13/16 20 “D” mm mm 68 1-5/8 41 70 1-3/8 35 76 1-9/32 33 79 1-15/32 37 79 1-15/32 37 89 1-3/16 30 108 1-3/16 30 111 1-1/2 38 122 1-15/16 37 Design Loads Lbs. Kg. 400 180 400 180 400 180 400 180 400 180 400 180 600 270 600 270 1000 450 EI 275E Epoxy Coated Swivel Ring Hanger Material : Epoxy Coated Carbon Steel Application: Designed for supporting non – insulated copper pipe lines. Epoxy coated finish hanger can be used in place of figure # E I 250 C copper coated hanger. Ordering : Specify figure number and pipe size. STANDARD PIPE HANGERS EI 275E ADJUSTABLE BAND HANGERS EPOXY COATED SIZE “A” mm 13 19 25 32 38 50 1/2 3/4 1 1-1/4 1-1/2 2 2(IP) 2-1/2 64 2-1/2(IP) 3 76 3(IP) 89 4 102 4(IP) 127 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 “B” “C’ mm mm mm 10 3-1/8 79 2-11/16 68 10 3-1/4 83 23/4 70 10 3-3/8 87 3 76 10 3-3/4 97 3-1/8 79 10 4 102 3-1/8 79 10 4-1/4 108 3-1/2 89 10 4-1/4 108 3-1/2 89 10 6-11/16 119 4-1/4 108 13 6-11/16 119 1-1/2 108 13 5-1/2 140 4-3/8 111 13 5-1/2 140 4-3/8 111 13 6-7/16 164 4-13/16 122 13 6-7/16 164 4-13/16 122 21 “D” 1-5/8 1-3/8 1-9/32 1-15/32 1-15/32 1-3/16 1-3/16 1-3/16 1-3/16 1-1/2 1-1/2 1-15/32 1-15/32 Design Loads mm 41 35 33 37 37 30 30 30 30 38 38 37 37 Lbs 400 400 400 400 400 400 400 600 600 600 600 1000 1000 Kg 180 180 180 180 180 180 180 270 270 270 270 450 450 EI 210 Light Duty Clevis Hanger Material : Carbon Steel Application : Designed for suspending stationary pipe lines. Design of hanger allows for vertical adjustment. Ordering : Specify pipe size and figure number. This hanger is designed for light loads only. For heavier loads refer to figure # EI 235standard clevis hanger. STANDARD PIPE HANGERS EI 210 LIGHT DUTY CLEVIS SIZE “A” mm “B” mm “C’ mm “D” mm Lower mm Material Upper mm Material mm 1/2 13 3/8 10 2-13/16 71 2 5/16 59 1/4 6 3/32x7/8 2.1x22 3/32x7/8 2.1x22 3/4 19 3/8 10 3 76 2 13/32 61 1/4 6 3/32x7/8 2.1x22 3/32x7/8 2.1x22 1 25 3/8 10 3-5/16 84 2 19/32 66 1/4 6 3/32x7/8 2.1x22 3/32x7/8 2.1x22 1-1/4 32 3/8 10 3-11/16 93 2-11/16 68 1/4 6 3/32x7/8 2.1x22 3/32x7/8 2.1x22 1-1/2 38 3/8 10 4 101 2-13/16 71 1/4 6 3/32x7/8 2.1x22 3/32x7/8 2.1x22 2 50 1/2 13 4-7/16 112 3-9/16 80 1/4 6 3/32x7/8 2.1x22 3/32x7/8 2.1x22 2-1/2 64 1/2 13 5-3/8 136 4 100 3/8 13 1/8x1-3/16 3 x 30 1/8x1-3/16 3 x 30 3 76 1/2 13 6 152 4-3/16 107 3/8 13 1/8x1-3/16 3 x 30 1/8x1-3/16 3 x 30 3-1/2 89 1/2 13 6-5/8 168 4-5/8 117 3/8 13 1/8x1-3/16 3 x 30 1/8x1-3/16 3 x 30 4 102 1/2 13 7-1/2 190 5-3/16 132 3/8 13 1/8x1-3/16 3 x 30 3/16x1-3/16 4.5 x 30 5 127 5/8 16 8-7/8 225 6-1/16 154 1/2 13 3/16x1-3/16 4.5x30 1/4x1-3/16 6x30 6 152 3/4 19 10 254 6-5/8 169 1/2 13 3/16x1-1/2 4.5x38 1/4x1-1/2 6x38 8 203 3/4 19 12-3/4 324 8-3/8 213 5/8 16 3/16x1-1/2 4.5x38 1/4x1-1/2 6x38 10 245 7/8 22 16-5/8 435 11-11/16 297 3/4 19 1/4x1-3/4 6x44 11/32x1-3/4 9x44 12 305 7/8 22 3/4 19 1/4x2 6x50 11/32x2 9x50 18-11/16 475 12-1/4 312 22 EI 280E Light Duty Epoxy Coated Clevis Hanger Material : Epoxy Coated Carbon Steel Application : Designed for suspending light stationary pipe allowing for vertical adjustment. Epoxy coating is for preventing contact between tubing and the hanger. Ordering : Specify figure number and pipe size. Only available in sizes 1/2” thru 4” STANDARD PIPE HANGERS EI 280E LIGHT DUTY CLEVIS EPOXY SIZE A B mm C mm D mm Upper mm Material Lower mm Material mm 1/2CP 3/8IP 3/8 10 2 13/16 71 13/16 30 1/4 6 3/32 x 7/8 2.1x22 3/32 x 7/8 2.1 x 22 3/4CP 1/2IP 3/8 10 3 76 17/8 48 1/4 6 3/32 x 7/8 2.1x22 3/32 x 7/8 2.1 x 22 1CP 3/4IP 3/8 10 3 5/16 84 21/4 52 1/4 6 3/32 x 7/8 2.1x22 3/32 x 7/8 2.1 x 22 1IP 3/8 10 3 11/16 93 21/4 57 1/4 6 3/32 x 7/8 2.1x22 3/32 x 7/8 2.1 x 22 11/4CP 11/2CP 11/4IP 3/8 10 4 101 23/8 60 1/4 6 3/32 x 7/8 2.1x22 3/32 x 7/8 2.1 x 22 2CP 11/2IP 1/2 13 4 7/16 112 23/4 70 1/4 6 3/32 x 7/8 2.1x22 3/32 x 7/8 2.1 x 22 2IP 1/2 13 4 7/16 112 23/4 70 1/4 6 3/32 x 7/8 2.1x22 3/32 x 7/8 2.1 x 22 21/2CP 1/2 13 5 3/8 136 31/4 82 3/8 10 1/8 x1 3/16 3x30 1/8 x1 3/16 3 x 30 21/2IP 1/2 13 5 3/8 136 31/4 82 3/8 10 1/8 x1 3/16 3x30 1/8 x1 3/16 3 x 30 3CP 1/2 13 6 152 31/2 89 3/8 10 1/8 x1 3/16 3x30 1/8 x1 3/16 3 x 30 3IP 1/2 13 6 152 31/2 89 3/8 10 1/8 x1 3/16 3x30 1/8 x1 3/16 3 x 30 4CP 5/8 13 7 1/2 190 41/4 108 3/8 10 3/16 x1 3/16 4.5x30 1/8 x1 3/16 3 x 30 4IP 5/8 13 7 1/2 190 41/4 108 3/8 10 3/16 x1 3/16 4.5x30 1/8 x1 3/16 3 x 30 23 EI 310 C Light Duty Copper Clevis Hanger Copper Electroplated Carbon Steel. Application : Designed for suspending copper tubing lines. Design of hanger allows for vertical adjustment. Ordering : Specify figure number and pipe size. STANDARD PIPE HANGERS Material : EI 310C LIGHT DUTY CLEVIS COPPER PLATED SIZE “A” mm “B” mm “C’ mm “D” mm Material mm Material Lower mm Upper mm 1/2 13 3/8 10 2-13/16 71 2 5/16 59 1/4 6 2.1 x 22 2.1 x2 2 3/32x7/8 3/32 x7/8 3/4 19 3/8 10 3 76 2 13/32 61 1/4 6 2.1 x 22 2.1 x 22 3/32x7/8 3/32 x7/8 1 25 3/8 10 3-5/16 84 2 19/32 66 1/4 6 2.1 x 22 2.1 x 22 3/32x7/8 3/32 x7/8 1-1/4 32 3/8 10 3-11/16 93 2-11/16 68 1/4 6 2.1 x 22 2.1 x 22 3/32x7/8 3/32 x7/8 1-1/2 38 3/8 10 4 101 2-13/16 71 1/4 6 2.1 x 22 2.1 x 22 3/32x7/8 3/32 x7/8 2 50 1/2 13 4-7/16 112 3-9/16 80 1/4 6 2.1 x 22 2.1 x 22 3/32x7/8 3/32 x7/8 2-1/2 64 1/2 13 5-3/8 136 4 100 3/8 13 3 x 30 3 x 30 1/8x1-3/16 1/8x1-3/16 3 76 1/2 13 6 152 4-3/16 107 3/8 13 3 x 30 3 x 30 1/8x1-3/16 1/8x1-3/16 3-1/2 89 1/2 13 6-5/8 168 4-5/8 117 3/8 13 3 x 30 3 x 30 1/8x1-3/16 1/8x1-3/16 4 102 1/2 13 7-1/2 190 5-3/16 132 3/8 13 3 x 30 4.5 x30 3/16x1-3/16 1/8x1-3/16 24 EI 235 Standard Clevis Hanger Material : Zinc plated carbon steel. Also available in Stainless Steel Application : Designed for suspending non – insulated stationary pipe, allowing for vertical adjustment. Ordering : Specify pipe size and figure number. Approvals : Complies with Manufacturers Standardization Society SP – 69 Type 1 EI 235 STANDARD CLEVIS HANGER SIZE “A” mm “B” mm “C’ mm “D” mm Lower mm Material Upper mm Material mm 13 3/8 10 2-3/8 73 2 13/32 61 1/4 6 1/8x1 3x25 1/8x1 3x25 3/4 19 3/8 10 3-5/32 80 2 9/16 65 1/4 6 1/8x1 3x25 1/8x1 3x25 1 25 3/8 10 3-5/16 84 2 21/32 68 1/4 6 1/8x1 3x25 1/8x1 3x25 1-1/4 32 3/8 10 3-3/4 95 2-3/4 70 1/4 6 1/8x1 3x25 1/8x1 3x25 1-1/2 38 3/8 10 4-1/16 103 2-7/8 73 1/4 6 1/8x1 3x25 1/8x1 3x25 2 50 3/8 10 4-1/2 114 3-1/4 82 1/4 6 1/8x1 3x25 1/8x1 3x25 2-1/2 64 1/2 13 5-1/2 140 4-1/16 103 3/8 10 3/16x1-3/16 4.5x30 3/16x1-3/16 4.5x30 3 76 1/2 13 6-1/8 155 4-5/16 110 3/8 10 3/16x1-3/16 4.5x30 3/16x1-3/16 4.5x30 3-1/2 89 1/2 13 6-3/4 171 4-3/4 120 3/8 10 3/16x1-3/16 4.5x30 3/16x1-3/16 4.5x30 4 102 5/8 16 7-5/8 193 5-5/16 135 3/8 10 3/16x1-3/16 4.5x30 1/4x1-3/16 6x30 5 127 5/8 16 8-7/8 225 6-1/16 154 1/2 13 3/16x1-3/16 4.5x30 1/4x1-3/16 6x30 6 152 3/4 19 10 254 6-5/8 169 1/2 13 3/16x1-1/2 4.5x38 1/4x1-1/2 6x38 8 203 3/4 19 12-3/4 324 8-3/8 213 5/8 16 3/16x1-1/2 4.5x38 1/4x1-1/2 6x38 10 254 7/8 22 16-5/8 435 11-11/16 297 3/4 19 1/4x1-3/4 6x44 11/32x1-3/4 9x44 12 305 7/8 22 18-11/16 475 312 3/4 19 1/4x2 6x50 11/32x2 9x50 14 356 1 25 20-5/16 533 13-15/16 354 7/8 22 1/4x2 6x50 15/32x2 12x50 16 406 1 25 22-1/16 560 1 25 1/4x2-1/2 6x63 15/32x2-1/2 12x63 18 457 1 25 24-3/4 628 15-11/16 398 1-1/8 28 1/4x2-1/2 6x63 15/32x2-1/2 12x63 20 508 1-1/4 32 27-3/8 695 17-5/16 440 1-1/4 32 11/32x3 9x76 5/8x3 16x76 24 610 1-1/4 32 31-5/8 803 19-9/16 497 1-1/4 32 11/32x3 9x76 5/8x3 16x76 12-1/4 14 355 25 STANDARD PIPE HANGERS 1/2 EI 235 SS Stanless Steel Standard Clevis Hanger Material : Stainless steel. Application : Designed for suspending non – insulated stationary stainless steel pipe, allowing for vertical adjustment. Ordering : Specify pipe size and figure number. Approvals : Complies with Manufacturers Standardization Society SP – 69 Type 1 EI 235SS STANDARD CLEVIS HANGER SIZE “A” STANDARD PIPE HANGERS mm “B” mm “C’ mm “D” mm Lower mm Material Upper mm Material mm 1/2 13 3/8 10 2-3/8 73 2 13/32 61 1/4 6 1/8x1 3x25 1/8x1 3x25 3/4 19 3/8 10 3-5/32 80 2 9/16 65 1/4 6 1/8x1 3x25 1/8x1 3x25 1 25 3/8 10 3-5/16 84 2 21/32 68 1/4 6 1/8x1 3x25 1/8x1 3x25 1-1/4 32 3/8 10 3-3/4 95 2-3/4 70 1/4 6 1/8x1 3x25 1/8x1 3x25 1-1/2 38 3/8 10 4-1/16 103 2-7/8 73 1/4 6 1/8x1 3x25 1/8x1 3x25 2 50 3/8 10 4-1/2 114 3-1/4 82 1/4 6 1/8x1 3x25 1/8x1 3x25 2-1/2 64 1/2 13 5-1/2 140 4-1/16 103 3/8 10 3/16x1-3/16 4.5x30 3/16x1-3/16 4.5x30 3 76 1/2 13 6-1/8 155 4-5/16 110 3/8 10 3/16x1-3/16 4.5x30 3/16x1-3/16 4.5x30 3-1/2 89 1/2 13 6-3/4 171 4-3/4 120 3/8 10 3/16x1-3/16 4.5x30 3/16x1-3/16 4.5x30 4 102 5/8 16 7-5/8 193 5-5/16 135 3/8 10 3/16x1-3/16 4.5x30 1/4x1-3/16 6x30 5 127 5/8 16 8-7/8 225 6-1/16 154 1/2 13 3/16x1-3/16 4.5x30 1/4x1-3/16 6x30 6 152 3/4 19 10 254 6-5/8 169 1/2 13 3/16x1-1/2 4.5x38 1/4x1-1/2 6x38 8 203 3/4 19 12-3/4 324 8-3/8 213 5/8 16 3/16x1-1/2 4.5x38 1/4x1-1/2 6x38 10 254 7/8 22 16-5/8 435 11-11/16 297 3/4 19 1/4x1-3/4 6x44 11/32x1-3/4 9x44 12 305 7/8 22 18-11/16 475 312 3/4 19 1/4x2 6x50 11/32x2 9x50 14 356 1 25 20-5/16 533 13-15/16 354 7/8 22 1/4x2 6x50 15/32x2 12x50 16 406 1 25 22-1/16 560 1 25 1/4x2-1/2 6x63 15/32x2-1/2 12x63 18 457 1 25 24-3/4 628 15-11/16 398 1-1/8 28 1/4x2-1/2 6x63 15/32x2-1/2 12x63 20 508 1-1/4 32 27-3/8 695 17-5/16 440 1-1/4 32 11/32x3 9x76 5/8x3 16x76 24 610 1-1/4 32 31-5/8 803 19-9/16 497 1-1/4 32 11/32x3 9x76 5/8x3 16x76 12-1/4 14 355 26 EI 150 Standard Riser Clamp Material : Zinc Plated Carbon Steel Sizes 1/2” thru 6 “ Also available hot / dipped galvanized. Application: Designed for supporting and stabilizing vertical pipe runs. Ordering: Specify pipe size, and figure number. Approvals: Complies with Manufacturers Standardization Society SP – 69 Type 8. SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12 14 16 18 20 “A” mm 13 19 25 32 38 50 64 76 89 102 127 152 203 254 305 356 406 457 508 8-1/2 8-15/16 8-15/16 9-7/16 9-7/8 10-1/4 11 11-3/4 12-5/8 13 14-1/2 16 18-1/4 20-5/8 23 24-1/2 27 29 31-5/8 “B” mm 216 227 227 240 251 260 280 298 321 330 368 406 464 524 584 622 686 737 803 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 3/4 3/4 3/4 “C’ mm 10 10 10 10 10 10 10 10 13 13 13 13 16 16 16 16 19 19 19 1/8 x 1 1/8 x 1 1/8 x 1 1/8 x 1 1/8 x 1 5/32x1-1/4 5/32x1-1/4 3/16x1-1/4 3/16x1-1/4 1/4x1-1/4 1/4x1-1/4 1/4x2 3/8 x 2 3/8 x 2 1/2 x 2 1/2 x 2 5/8 x 2-1/2 5/8 x 2-1/2 5/8 x 3 27 “D” mm 3x25 3x25 3x25 3x25 3x25 4x30 4x30 4.5x30 4.5x30 5.5x30 5.5x30 5.5x50 10x50 10x50 13x50 13x50 16x64 16x64 16x76 1-3/16 2-11/16 2-13/16 3-5/16 3-3/4 4-3/16 4-7/8 5-1/2 6-5/8 8-1/4 9-5/8 12-1/4 14-5/8 17-1/8 18-1/4 21 23 23 25-5/8 mm 29 68 71 83 95 106 124 140 168 168 210 244 311 371 435 464 533 584 651 Max Load lbs Kg 200 90 255 115 255 115 255 115 255 115 300 136 400 182 500 227 600 270 750 340 1400 630 1400 630 2200 990 2200 990 2700 1215 2700 1215 2900 1305 2900 1305 2900 1305 STANDARD PIPE HANGERS EI 150 STANDARD RISER CLAMP EI 322 Short Tongue Riser Clamp Material : Carbon Steel Application: Designed for use on vertical pipe runs that have to be attached to a cement column, usually in underground parking lots. The short ear pattern of this clamp allows for simple installation. Ordering: Specify pipe size, and figure number. Material : Zinc Plated Carbon Steel Sizes 2” thru 6“ Also available Hot Dipped Galvanized. Application: Designed for supporting and stabilizing vertical pipe runs. Ordering: Specify pipe size, and figure number. STANDARD PIPE HANGERS . EI 322 SHORT TONGUE RISER CLAMP Size mm 2 50 2-1/2 64 3 76 4 102 6 152 A 6-1/4 7-1/8 8 9-3/8 105/8 B mm 159 181 203 238 269 3/8 3/8 3/8 1/2 1/2 C mm 9 9 9 13 13 28 mm 3/16x1-1/4 5x32 1/4x1-1/4 6x32 1/4x1-1/4 6x32 1/4x1-1/2 6x38 1/4x2 6x50 D 4-5/16 5-7/16 5-13/16 7-1/8 9-1/2 mm 116 138 147 181 241 EI 325 C Copper Plated Riser Clamp Material : Copper Electroplated Carbon Steel. Application : Designed to support and stabilize vertical runs of copper tubing. Ordering : Specify figure number and copper tubing size. Approvals : Complies with Manufacturers Standardization Society SP – 69 Type 8. STANDARD PIPE HANGERS EI 325C STANDARD RISER CLAMP COPPER PLATE SIZE mm 1/2 13 3/4 19 1 25 1-1/4 32 1-1/2 38 2 50 2-1/2 64 3 76 4 102 “A” 8-1/2 9-1/4 9-1/4 9-1/2 9-1/2 10-1/4 11 12 12-1/2 “B” mm 216 235 235 241 241 260 280 305 318 5/16 5/16 5/16 5/16 3/8 3/8 3/8 3/8 3/8 “C’ mm 8 8 8 8 10 10 10 10 10 29 1/8" x 1 1/8" x 1 1/8" x 1 5/32"x1-1/4 5/32"x1-1/4 5/32"x1-1/4 5/32"x1-1/4 5/32"x1-1/4 5/32"x1-1/4 “D” mm 3x25 3x25 3x25 4x32 4x32 4x32 4x32 4x32 4x32 2-1/2 2-3/4 3-1/4 3-1/2 3-5/8 4-3/8 5-3/8 6 6-1/2 mm 64 70 83 89 92 111 137 152 165 EI 410 C-Clamp Malleable Iron. Application: Designed for attachment to standard I-Beams where the beam thickness does not exceed 5/8”. Ordering: Specify pipe size, and figure number. Approvals: Complies with Manufacturers Standardization Society SP – 69 Type 19. STANDARD PIPE HANGERS Material : EI 410 C-CLAMP SIZE 3/8 1/2 5/8 3/4 A mm 10 13 16 19 15/16 15/16 1-9/64 1-9/64 B mm 24 24 29 29 1-3/4 1-3/4 2-1/8 2-1/8 C mm 45 45 54 54 1-3/4 1-3/4 2-7/32 2-7/32 30 D mm 45 45 56 56 3/8 3/8 3/8 3/8 E mm 10 10 10 10 13/16 13/16 13/16 13/16 mm 20 20 20 20 EI 50 Zinc Plated 2- Hole Pipe Strap Material : Zinc Plated Carbon Steel Application : Designed to support steel pipe on walls or on a roof where pipe needs to be securely fastened. Ordering : Specify figure number and pipe size. STANDARD PIPE HANGERS EI 50 2-HOLE PIPE STRAP SIZE 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 A mm 10 13 19 25 32 38 50 64 76 102 11/16 13/16 1-1/16 1-5/16 1-21/3 1-7/8 2-3/8 2-7/8 3-1/2 4-1/2 B mm 17 21 27 33 42 48 60 73 89 114 31 1-5/8 1-3/4 1-7/8 2-3/8 2-7/8 3-1/4 4-1/4 4-7/8 5-5/8 6-15/1 mm 41 44 48 60 73 83 108 124 143 176 EI 129 Split Ring Hanger Zinc Plated Malleable Iron. Application: Designed for suspending non-insulated pipe horizontally. Ordering: Specify pipe size, and figure number. Approvals: Complies with Manufacturers Standardization Society SP – 69 Type 12. STANDARD PIPE HANGERS Material : EI 129 SPLIT RING HANGER SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 A mm 13 19 25 32 38 50 64 76 89 102 B 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 mm 10 10 10 10 10 10 13 13 7/8 1 1-7/64 1-5/16 1-17/32 1-11/16 2-1/8 2-7/16 mm 22 25 28 33 39 43 54 62 1/2 13 3 75 32 EI 58 Heavy Duty Black ShortStrap Material : Carbon Steel Application: Designed for supporting pipe runs between walls, ceilings, and on a roof. Ordering: Specify pipe size, and figure number. Approvals: Complies with Manufacturers Standardization Society SP – 69 Type 26. STANDARD PIPE HANGERS EI 58 HEAVY DUTY BLACK SHORT STRAP SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12 A B C D mm mm mm mm 13 2-7/16 62 7/8 22 7/8 20 19 2-7/8 73 1-7/64 28 1 25 25 2-7/8 73 1-3/8 35 1-1/4 32 32 3-9/16 90 1-3/4 44 1-5/8 41 38 3-15/16 100 2 50 1-7/8 47 50 4-7/16 113 2-7/16 62 2-1/4 57 64 5-13/16 148 2-15/16 75 2-11/16 69 76 6 152 3-9/16 91 3-5/16 84 89 102 8 203 4-9/16 116 4-5/16 110 127 8-5/8 219 5-11/16 144 5-3/8 136 152 9-5/8 245 6-3/4 171 6-3/8 162 203 12-5/8 320 8-3/4 222 8-1/2 216 254 14-1/8 359 10-7/8 276 10-5/8 270 305 16-3/8 416 12-7/8 327 12-5/8 321 33 5/16 5/16 5/16 5/16 7/16 7/16 7/16 7/16 mm 8 8 8 8 11 11 11 11 E (Material) mm 1/8x1 3x25 1/8x1 3x25 1/8x1 3x25 1/8x1 3x25 9/64x1-1/4 3.5x32 9/64x1-1/4 3.5x32 3/16x1-1/2 4.5x38 3/16x1-1/2 4.5x38 9/16 9/16 9/16 11/16 13/16 13/16 14 14 14 17 21 21 1/4x1-1/2 1/4x1-1/2 1/4x1-1/2 3/8x1-1/2 3/8x2 15/32x2 6x38 6x38 6x38 10x38 10x50 12x50 STANDARD PIPE HANGERS EI 500 Offset Pipe Clamp Material: Carbon Steel Finish: Bare metal standard. Zinc plated and hot dipped galvanized are also available. Service: These clamps are designed for supporting vertical or horizontal pipe runs at a fixed distance from a wall or structure. Ordering: Specify part number, and pipe size. EI500 OFFSET PIPE CLAMP PIPE A B mm C mm D mm E SIZE mm mm lbs. kg 1/2 13 6 152 2 1/2 64 3/8 10 7/16 11 13/16x11/4 5x32 190 86 3/4 19 7 5/16 189 2 1/2 64 3/8 10 7/16 11 13/16x11/4 5x32 190 86 1 25 7 9/16 192 2 5/8 67 3/8 10 7/16 11 13/16x11/4 5x32 190 86 1 1/4 32 7 7/8 200 2 13/16 71 3/8 10 7/16 11 13/16x11/4 5x32 190 86 1 1/2 38 8 1/4 210 3 75 3/8 10 7/16 11 13/16x11/4 5x32 190 86 2 50 9 1/8 232 3 3/16 81 1/2 13 9/16 14 1/4x11/4 6x32 420 191 2 1/2 64 10 1/2 267 3 7/16 87 1/2 13 9/16 14 1/4x11/4 6x32 420 191 3 76 11 1/8 283 3 3/4 95 1/2 13 9/16 14 1/4x11/4 6x32 420 191 4 102 12 1/2 318 4 1/4 108 1/2 13 9/16 14 1/4x11/2 6x38 610 277 5 127 13 3/4 349 4 3/4 121 5/8 16 11/16 17.5 1/4x2 6x50 610 277 6 152 16/1/2 419 5 5/16 135 5/8 16 11/16 17.5 3/8x2 10x50 870 395 8 203 18 5/8 473 6 5/16 160 5/8 16 11/16 17.5 3/8x2 10x50 870 395 10 254 23 584 7 3/4 197 3/4 19 13/16 21 3/8x3 10x76 870 395 12 305 25 635 8 3/4 222 3/4 19 13/16 21 3/8x3 10x76 870 395 34 mm Max Loads EI132 One Hole Clamp Material : Zinc Plated Malleable Iron. Application: Designed for supporting light duty pipe against wood or concrete walls. Ordering: Specify pipe size, and figure number. STANDARD PIPE HANGERS EI 132 ONE HOLE CLAMP SIZE 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A mm 9 13 19 25 32 38 50 7/8 1 1-3/16 1-3/8 1-9/16 1-13/16 2-1/8 B mm 22 25 30 35 40 46 54 35 1/4 1/4 5/16 3/8 3/8 1/2 1/2 mm 6 6 8 10 10 13 13 EI 48 Solid Copper Pipe Strap c/w nails Solid copper sheet stock Size Range: 1/2", 3/4", 1', 1 1/4", 1 1/2", and 2". Ordering: Specify copper tube size required. STANDARD PIPE HANGERS Material: EI48 SOLID COPPER PIPE STRAPS Size A B mm mm 1/2 13 1 5/8 41 0.669 3/4 19 1 3/4 44 0.875 1 25 2 1/8 54 1.125 1 1/4 32 2 1/4 57 1.375 1 1/2 38 2 7/8 73 1.625 2 50 3 3/8 85 2.125 36 mm 17 22 29 35 42 54 FIRE PROTECTION AND WATERWORKS HANGERS Hangers offered in this section are designed to support fire sprinkler pipe, ductile iron pipe, and specially designed P.V.C. waterworks pipe. Most fire protection products in this section carry a U.L. or U,L.C. and a F.M. approval. Material: Carbon steel, malleable iron and 316 L stainless steel are used in manufacturing these hangers. Other materials are also available on request. Finishes: There is an assortment of finishes used in the fire protection product line, Standard hangers are made from pregalvanized material while sway bracing products are made from A - 36 wire and are finished black. Waterworks clamps are also furnished bare metal but hook tie bolts come Zinc Plated. EI 100 Adjustable Swing Ring Hanger Material: Pre Galvanized Carbon Steel Applicaticion: Used for all general purpose and fire protection lines. The knurled nut allows for hanger alignment and adjustment after installation. Approvals: Underwriters Laboritory Listed, Factory Mutual Approved. Conforms to N.F.P.A regulations. Max Temp: 650ºF Ordering: Specify fugure number and pipe size. FIRE PROTECTION AND WATERWORKS EI 100 ADJUSTABLE BAND HANGERS SIZE 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 “A” mm 13 19 25 32 38 50 64 76 89 102 127 152 203 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 “B” mm 10 10 10 10 10 10 13 13 13 13 19 16 16 3-1/4 3-3/8 3-3/4 4 4-1/4 4-13/16 6 6-3/8 7-1/4 7-5/16 9-1/8 9-7/16 12 “C’ mm 83 87 95 102 108 122 154 162 184 186 232 240 305 2-11/16 2-3/4 3 3-1/8 3-1/8 3-1/2 4-1/4 4-3/8 4-5/8 4-13/16 5-1/4 5-3/4 7-1/4 39 “D” mm 68 70 76 79 79 89 108 111 117 122 133 146 184 1-3/8 1-3/8 1-15/32 1-15/32 mm 35 35 37 37 1-15/16 1-5/8 1-1/2 1-1/2 1-11/16 2 2-7/16 2-3/4 37 41 38 38 43 50 62 70 Design Loads lbs kg 750 340 750 340 750 340 750 340 750 340 750 340 850 386 1050 476 1500 2000 2650 4050 680 907 1202 1837 EI A 001 Sway Brace SIZE: Pipe to be braced: 1" thru 8" Steel SCH 7 thru 40 IPS. Pipe used for bracing: 1" and 1 1/4" SCH 40 IPS. MATERIAL: Carbon Steel. FINISH: Plain, Electro-Galvanized and H.D.G. APPROVALS: FIRE PROTECTION AND WATERWORKS • Patented • UL Listed • Must be used with AFCON listed Attachment Ends. FUNCTION: For bracing pipe against sway and seismic disturbances per N.F.P.A. The pipe attachment component used to secure the system piping to the brace pipe. INSTALLATION: • Place assembly over system pipe to be braced. • Insert bracing pipe through MODEL “E” under channel bracket, leaving 1' minimum extension beyond. • Tighten both hex nuts until gage spring lays flat. • Install per N.F.P.A. FEATURES: • Field adjustable - Eliminates pre-engineering of brace pipe length. • Requires no threading. • Can be used as a 4-way riser brace. • Gage spring allows easy verification of necessary minimum torque. (5LB/FT) ORDERING: Part #, Pipe size to be braced, Braced pipe size and Finish. 40 EI A 070 Attachment End Threaded SIZE: 1 thru 2 inch bracing pipe. MATERIAL: Carbon Steel. FINISH: Plain and Electro-Galvanized. FIRE PROTECTION AND WATERWORKS APPROVALS: • Patented • UL Listed FUNCTION: The building attachment component used to secure brace pipe to the structure of this sway bracing system. INSTALLATION: Make-On to brace pipe then secure to the building structure with appropriate fastener. FEATURES: • Swivel design allows attachment at any angle. • To be used with threaded pipe. • May be ordered with larger hole.- Consult Factory. ORDERING: Part #, pipe size and finish. 41 FIRE PROTECTION AND WATERWORKS EI A 072 Straight Attachment End - Threaded SIZE: 1 and 1 1/4 inch bracing pipe. MATERIAL: Carbon Steel. FINISH: Plain, Electro-Galvanized and H.D.DG. FUNCTION: The building attachment component used to secure brace pipe to the structure of this sway brace systems. INSTALLATION: • Make-on to brace pipe then secure to the building structure with appropriate fastener. • DO NOT BEND - IF ANGLE REQUIRED USE PART #070. ORDERING: Part #, pipe size and finish. 42 EI A 077 Locking Attachment End SIZE: 1 and 1 1/4 inch bracing pipe. MATERIAL: Carbon Steel. FIRE PROTECTION AND WATERWORKS FINISH: Plain, Electro-Galvanized and H.D.G. APPROVALS: • Patented. • Underwriters Laboratories Listed FUNCTION: The building attachment component used to secure brace pipe to the structure of this sway bracing system. INSTALLATION: • Insert brace pipe into fitting and against swivel bolt.. • Tighten set screw until it contacts tightly against the fitting. FEATURES: • To be used with plain end pipe. • Swivel design allows attachment at any angle. • Visual inspection, proper torque when set screw head contacts bracket. • May be ordered with larger hole. - Consult factory. ORDERING: Part #, pipe size and finish. 43 EI A 079 4 - WaySway Brace Attachment SIZE: FIRE PROTECTION AND WATERWORKS 1"x1", 1 1/4"x1",1 1/4"x1 1/4" MATERIAL: Carbon Steel. FINISH: Plain and Electro-Galvanized. APPROVALS: Underwriters Laboratories Listed. FUNCTION: Bracing risers and piping for seismic disturbances. Location of AFCON #079 requires that maximum distance of 3" from braced pipe be maintained. INSTALLATION: Extended brace pipes through parts until contact or pass beyond the pivot bolt. Tighten set screws until set screw head contacts bracket. ORDERING: Part #, size and finish. 44 EI A 160 Retaining Strap SIZE: 3/8 thru 3/4" rod by 4 thru 18" length. FIRE PROTECTION AND WATERWORKS MATERIAL: Carbon Steel. FINISH: Mil. Galvanized APPROVALS: 3/8" AND 1/2" Rod size are Underwriters Laboratories Listed. FUNCTION: To offer more secure fastening of Beam Clamp to beam when danger of movement might be expected. INSTALLATION: See drawing. ORDERING: Part #, overall length and rod size being used with Beam Clamp. NOTE: Minimum return of Strap: 1" 45 EI A 162 Retro Retaining Strap SIZE: FIRE PROTECTION AND WATERWORKS One size fits 3/8" and 1/2". Available lenghts 4" thru 18". MATERIAL: Carbon Steel. FINISH: Mil. Galvanized. APPROVALS: UL and cUL Listed. PATENT PENDING FUNCTION: To offer more secure fastening of Beam Clamp to beam when danger of movement might be expected. INSTALLATION: Install tight to structure - NO NUT REQUIRED. FEATURES: • Quickly RETRO FITS on hanger assembly. • Requires no disassembly to install. ORDERING: Part #, and overall length. 46 EI A 510 C.P.V.C. Pipe Hanger SIZE: 3/4" thru 2" C.P.V.C. Pipe. 3/4" thru 2" copper Pipe. 1" thru 1 1/2" Poz-Lok. MATERIAL: FIRE PROTECTION AND WATERWORKS Carbon Steel. FINISH: Mil. Galvanized, G-90 Spec. APPROVALS: UL and cUL Listed. FUNCTION: Hanger, support or restrainer for C.P.V.C. Or Copper Piping used in Fire Sprinkler Systems install per N.F.P.A. 13, 13R and 13D. INSTALLATION: • Install on top, bottom or side of beam. • Hanger spacing - SEE BELOW. • Fasteners —In wood - use listed hex head screw furninshed with product. —In concrete or heavy steel - UL listed shot type fasteners, “Only when installed prior to pipe insertion”. FEATURES: • Offers edge for abrasion elimination and superior strength. • Retainer dimples secure hanger to pipe during installation. • Required fastener furnished with the hanger, needs no pre-drilling. ORDERING: Part #, and C.P.V.C., OR Copper pipe size. 47 EI A 511 C.P.V.C. Pipe Hanger Side Mount SIZE: 3/4 thru 2" C.P.V.C. Pipe. 3/4 thru 2" Copper Pipe. 1" thru 1 1/2 “ Poz-Lok. MATERIAL: Carbon Steel. FINISH: FIRE PROTECTION AND WATERWORKS Mil. Galvanized, G-90 Spec. APPROVALS: UL and cUL Listed FUNCTION: Hanger, support or restrainer for C.P.V.C. Copper Piping used in Fire Sprinkler Systems installed per N.F.P.A. 13, 13R and 13D. INSTALLATION: • Install on top, bottom or side of beam. • Hanger spacing - SEE BELOW • Fasteners —In wood - use listed hex head screw furnished with product. —In concrete of heavy steel - UL has listed shot type fasteners, “Only when installed prior to pipe insertion”. FEATURES: • Offset edge for abrasion elimination and superior strength. • Retainer dimples secure hanger to pipe during installation. • Required fastener furnished with the hanger, needs no pre-drilling. ORDERING: Part #, and C.P.V.C. or Copper pipe size. 48 EI A 512 C.P.V.C. Pipe Hanger Single Fastener - H SIZE: 3/4" thru 1" C.P.V.P.C. 3/4" thru 1" Copper Pipe. 1" Poz-Lok. MATERIAL: Carbon Steel. FINISH: FIRE PROTECTION AND WATERWORKS Mil. Galvanized, G-90 Spec. APPROVALS: UL and cUL Listed. FUNCTION: Hanger, support or restrainer for C.P.V.C. or Copper Piping used in Fire Sprinkler Systems installed per N.F.P.A. 13, 13R and 13D. INSTALLATION: • Install on top or side of beam with the hanger tab upward only. • If installed inverted, with the hanger tab downward it does not function as a hanger, but as a restrainer. • Special UL Listing - To install under horizontal surface - Consult Factory. • Hanger spacing - SEE BELOW. • Fastener —In wood - use listed hex head screw furnished with product. —In concrete or heavy steel - UL has listed shot type fasteners, “Only when installed prior to pipe insertion”. FEATURES: • Quickly clips on pipe = FAST INSTALLATION. • Offset edge for abrasion elimination and superior strength. • Required fastener furnished with the hanger, needs no pre-drilling. • Retainer dimples secure hanger to pipe during installation. ORDERING: 49 EI A 513 C.P.V.C. Pipe Hanger Single Fastener SIZE: 3/4" thru 2" C.P.V.C. 3/4" thru 2" Copper Pipe. 1" thru 1 1/2" Poz-Lok. FIRE PROTECTION AND WATERWORKS MATERIAL: Carbon Steel. FINISH: Mil. Galvanized, G-90 Spec. APPROVALS: UL and cUL Listed. FUNCTION: Hanger, support or restrainer for C.P.V.C. or Copper Piping used in Fire Sprinkler Systems installed per N.F.P.A. 13,13R and 13D. INSTALLATION: • Install on top or side of beam with the hanger tab upward only. • If installed inverted, with the hanger tab downward it does not function as a hanger, but as a restrainer. • Special UL Listing - To install under horizontal surface - Consult Factory. • Hanger spacing - SEE BELOW • Fasteners —In wood - use listed hex head screw furnished with product. —In concrete or heavy steel - UL has listed shot type fasteners, “Only when installed prior to installation”. FEATURES: • Offset edge for abrasion elimination and superior strength. • Required fastener furnished with the hanger, needs no pre-drilling. ORDERING: Part #, and C.P.V.C. Pipe size. 50 EI A 551 Threaded Side Beam Connector SIZE: FIRE PROTECTION AND WATERWORKS 3/8" rod - 1/2" thru 4" pipe sizes. MATERIAL: Carbon Steel. FINISH: Plain and Electro-Galvanized. APPROVALS: UL & cUL Listed. PATENT PENDING. FUNCTION: To support piping from wood, concrete or stell beams. INSTALLATION: Per NFPA #13 1/2" thru 2" pipe, use 3/8" fastener in center hole. 2 1/2" thru 4" pipe use 1/2" fastener in center hole FEATURES: Offset design allows hanger rod adjustment. Flared orfice aligns threaded rod. ORDERING: Part #, and finish. 51 EI A 552 Tapped Side Beam Connector FIRE PROTECTION AND WATERWORKS SIZE: 3/8" rod - 1/2" thru 4" pipe sizes MATERIAL: Carbon Steel. FINISH: Plain and Electro-Galvanized. APPROVALS: UL & cUL Listed. FUNCTION: To support piping from wood, concrete or steel beams. INSTALLATION: Per NFPA #13 1/2" thru 2" pipe, use 3/8" fastener in center hole. 2 1/2" thru 4" pipe, use 1/2" fastener in center hole. FEATURES: Offset design allows hanger rod adjustment. ORDERING: Part #, and finish. 52 EI A 610 Ceiling Plate FIRE PROTECTION AND WATERWORKS SIZE: 3/8" MATERIAL: Carbon Steel. FINISH: Plain and Electro-Galvanized. APPROVALS: UL and cUL Listed. FUNCTION: • Attachment to metal beams, decks and walls or wood beams, ceiling and walls. • May also be welded. INSTALLATION: To support 1/2" thru 2" pipe. -Fasten per NFPA - 13 • Additionally UL has listed use in bar joist to support 1/2" thru 4" pipe. FEATURES: Offset allows 3/16" thread thru zone. ORDERING: Part #, and finish. 53 EI 375 Top Beam Clamp Cast Malleable Iron Application : Designed for attaching a hanger rod to the top or bottom flange of a bar joist or other structural shapes where the thickness of the flange does not exceed 5/8”. Ordering : Specify figure number and rod size. If retaining strap is required it must be ordered separately. Approvals : Underwriters’ Laboratory Listed and Factory Mutual Approved. Complies with Manufacturers Standardization Society SP – 69 Type 19. FIRE PROTECTION AND WATERWORKS Material : EI 375 TOP BEAM CLAMP Rod Size 3/8 1/2 5/8 3/4 mm 10 13 16 19 “B” 1 1 1 1-1/8 “C” “D” mm mm mm 25 1-13/16 45 1-1/2 38 25 2 50 1-11/16 43 25 2-3/16 55 1-13/16 46 28 2-5/16 58 1-13/16 46 54 “E” 3/8 3/8 3/8 1/2 mm 10 10 10 13 EI 400 Wide Throat Top Beam Clamp Material : Cast malleable Iron Application : Designed for attaching a hanger rod to the top or bottom flange of a bar joist or other structural shapes where the thickness of the flange does not exceed 1 +” Ordering : Specify figure number, rod size, and flange thickness. Approvals : Underwriters’ Laboratory Listed and Factory Mutual Approved. Complies with Manufacturers Standardization Society SP – 69 Type 19 FIRE PROTECTION AND WATERWORKS EI 400 WIDE THROAT TOP BEAM CLAMP Rod Size 3/8 “B” mm 10 13/16 “C” mm 20.3 1-5/8 “D” mm 40.6 55 2 “E” mm 51.3 3/8 mm 10 EI 122 Bell Clamp for Waterworks Carbon Steel Application : Used as a safety device on a bell or spigot, or mechanical joint cast iron pipe where reversal stoppage or change in direction flow necessitates reinforcement. Ordering : Specify figure number and pipe size. FIRE PROTECTION AND WATERWORKS Material : These clamps are all sized to accomodate Ductile Iron Pipe only. Size 4 6 8 10 12 14 16 18 mm 102 152 203 254 305 356 406 457 EI 122 BELL CLAMP for WATERWORKS A B C D Pipe O.D. mm mm mm 4.80 122 7 7/8 200 5/8 16 3/8x1 1/2 6.90 175 10 256 5/8 16 3/8x1 1/2 9.05 230 13 328 3/4 19 3/8x2 11.10 282 15 7/8 392 3/4 19 1/2x2 13.20 335 175/16 440 3/4 19 1/2x2 15.30 389 1911/16 500 7/8 22 5/8x3 17.40 442 21 1/4 540 7/8 22 5/8x4 19.50 495 23 5/8 600 1 25 5/8x4 56 mm 10x38 10x38 10x50 12x50 12x50 16x76 16x100 16x100 EI 126 HookTie Bolt for Waterworks Fittings Material: Zinc Plated Carbon Steel Wire Application: Designed for use with AWWA Fittings, Flanges. Where a secured tight connetion on Ductile Iron pipe is required for a water main service. Ordering: Specify part number. FIRE PROTECTION AND WATERWORKS EI 126 HOOK TIE BOLT FOR WATERWORKS FITTINGS Size “A” mm mm 4 102 3/4 19 57 EI 920 Clevis Hanger for Ductile Iron Pipe Carbon steel Finish: Standard finish bare metal. Also available Zinc plated, or hot dipped galvanized. Service: Designed for suspending stationary ductile iron and allowing for vertical adjustment. Ordering: Specify figure number and pipe size. FIRE PROTECTION AND WATERWORKS Material: EI920 CLEVIS HANGER FOR DUCTILE IRON PIPE SIZE mm 4 102 6 152 8 203 10 254 PIPE O.D. mm 4.80 122 6.90 175 9.05 230 11.10 282 A 5/8 3/4 7/8 7/8 B mm 16 19 22 22 7 3/4 10 1/2 12 3/4 15 3/8 C mm 198 268 324 391 5 3/8 7 8 1/4 9 13/16 D mm 137 180 209 250 1/2 1/2 5/8 3/4 58 Upper mm 13 13 16 19 Material Lower Material mm mm 1/4x1 1/4 6x32 3/16x1 1/4 4.5x32 1/4x1 1/2 6x38 3/16x1 1/4 4.5x32 3/8x1 1/2 10x38 3/8x1 1/2 10x38 3/8x2 10x50 3/8x2 10x50 Load lbs. 1430 1940 2000 3600 kg 650 882 909 1636 INDUSTRIAL HANGERS AND CLAMPS Pipe hangers and clamps offered in this section are designed for support and attachment of pipe to structural members as well as our roller hangers which are designed to compensate for longitudinal movement due to the expansion and contraction of both insulated and non insulated pipe. Material: Carbon steel is used in the manufacturing of regular pipe clamps in this section. Roller hangers use the latest technology available iron accessories. Stainless Steel can also be used in the manufacturing process here for al products. Finishes: All standard hangers available in this section are available in a standard black finish. Zinc plating, and hot dipped galvanized finishes are also available. Clamps in this section can also be either painted with a primer finish or can be completely painted to your exact specifications. Approvals: As noted on each design these hangers are manufactured to a MSS SP - 69 standard. EI 320 Pipe Roller Material: Cast Iron Application: Designed for supporting pipe runs with longitudinal movement also a steel rod axle must be used with this pipe roller. Ordering: Specify figure number and pipe size requied. EI 320 PIPE ROLLER Size mm 32-38 50-64 76 89-102 127 152 203 254 305 356 406 457 508 610 3 3-1/4 3-7/8 5 5-7/8 6-7/8 8-7/8 11 12-3/4 14-3/8 16-5/32 18-1/4 20-5/8 24-3/4 B mm 76 83 98 124 150 175 225 279 324 365 410 464 524 629 C mm 32 35 38 45 51 57 67 86 99 118 121 146 153 178 1-1/4 1-3/8 1-1/2 1-3/4 2 2-1/4 2-5/8 3-3/8 3-7/8 4-5/8 4-3/4 5-3/4 6 7 61 3/4 7/8 1 1 1-5/32 1-1/4 1-1/2 1-3/4 2 2-3/4 2-15/16 3-3/4 3-15/16 4 D mm 19 22 25 25 29 32 38 45 51 70 75 95 100 102 7/16 9/16 9/16 21/32 21/32 7/8 1 1 1 1-7/32 1-11/32 1-11/32 1-1/2 1-9/16 mm 11 14 14 17 17 21 24 24 24 31 34 34 37 40 INDUSTRIAL PRODUCTS 1-1/4-1-1/2 2-2-1/2 3 3-1/2-4 5 6 8 10 12 14 16 18 20 24 A INDUSTRIAL PRODUCTS EI 46 Adjustable Socket End Materials: Malleable Iron Finish: Standard Black finish, Zinc Plated, or Hot dipped Galvanized are also available Ordering: These adjustable socket ends are standard products supplied with E.I. Fig. Nos E.I. 494 and E.I. 497. When ordered separately be sure to specify axle and rod dimensions. EI46 ADJUSTABLE SOCKET ENDS SIZE A Axle Size mm #1 3/8 10 #2 1/2 13 #3 5/8 16 #4 3/4 19 #5 7/8 22 #6 1 25 #7 1 1/4 32 #8 1 1/4 32 #9 1 1/2 38 B Rod Size 3/8 1/2 5/8 3/4 7/8 1 1 1 3/8 1 1/2 mm 10 13 16 19 22 25 25 34 38 62 Roller Size 1,1 1/4,11/2 2,2 1/2,3 3 1/2,4,5 6 8,12 14 16.18 20 24 mm 25-32-38 50-64-76 89-100-127 152 203-305 356 406-457 508 610 EI 466 Standard Roller Hanger Material: Carbon Steel body, cast iron roller. Application: Designed for suspending pipe where longitudinal movement and vertical adjustment is required. When this hanger is used with insulation a pipe protection saddle must be used. Ordering: Specify figure number and pipe size. When insulation is being used take diameter of pipe, plus two times the insulation thickness to arrive at actual size required. Approvals: Complies with Manufacturers’ Standardization Society SP - 69 Type 43. EI 466 STANDARD ROLLER HANGER 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12 14 16 18 20 24 A mm 38 1/2 50 1/2 64 1/2 76 1/2 89 5/8 102 5/8 127 5/8 152 3/4 203 7/8 254 7/8 305 7/8 356 1 406 1 457 1 508 1-1/4 610 1-1/2 B mm 13 13 13 13 16 16 16 19 22 22 22 25 25 25 32 38 5-1/4 5-1/4 5-1/4 5-3/4 7-1/4 7-1/4 9-3/16 11 12-5/8 14-7/8 17-1/2 19-3/4 20-1/2 23 25-3/8 29-1/2 C mm 133 133 133 146 184 184 237 279 321 378 445 502 521 584 645 749 3 3-1/4 3-1/4 3-7/8 4-15/16 4-15/16 6 7 9 11-9/64 13 14-1/2 16-1/2 18-1/2 20-3/4 24-13/16 D mm 77 83 83 99 125 125 152 178 229 283 330 368 419 470 527 630 63 3/8 1/2 1/2 1/2 5/8 5/8 5/8 3/4 7/8 7/8 7/8 1-1/8 1-1/4 1-1/4 1-3/8 1-1/2 E mm 10 13 13 13 16 16 16 19 22 22 22 29 32 32 35 38 3/16x1-1/4 3/16x1-1/4 3/16x1-1/4 5/16x1-1/4 1/4x1/2 1/4x1/2 1/4x2 1/4x2 3/8x2-1/2 1/2x2 1/2x2 1/2x2-1/2 1/2x3 1/2x3 5/8x3 5/8x4 F mm mm 5x32 1-3/8 34 5x32 1-5/8 41 5x32 1-7/8 47 5x32 2-1/8 53 6x38 2-9/16 64 6x38 2-13/16 70 6x50 3-7/16 87 6x50 4 102 10x64 5-1/8 130 12x50 6-3/8 162 12x50 7-7/16 189 12x64 8-3/8 213 12x76 9-3/8 238 12x76 10-1/2 267 16x76 11-5/8 295 16x102 13-7/8 352 Loads lbs kg 150 68 225 102 225 102 310 141 390 177 475 216 685 308 780 351 780 351 965 434 1200 540 1200 540 1200 540 1400 630 1600 720 1800 818 INDUSTRIAL PRODUCTS SIZE EI 469 Standard Roller Chair Material: Carbon Steel body, cast iron roller. Application: Designed for supporting pipe with longitudinal movement. When this hanger is used with insulation a pipe protection saddle must be used. Ordering: Specify figure number and pipe size. When insulation is being used take diameter of pipe, plus two times the insulation thickness to arrive at actual size required. EI 469 STANDARD ROLLER CHAIR INDUSTRIAL PRODUCTS SIZE 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12 14 16 18 20 24 A mm mm 38 1-1/2 38 50 1-1/2 38 64 1-1/2 38 76 2 50 89 2-1/2 64 102 2-1/2 64 127 3 76 152 3 76 203 3-1/2 88 254 5-1/4 133 305 5-1/2 140 356 6-1/2 165 406 8-1/4 210 457 9-1/4 235 508 10-1/4 260 610 12-1/4 310 B 3 3 3 3-7/8 4-7/8 4-7/8 6 7 9 11-1/8 13 14-1/2 16-1/2 18-1/2 20-3/4 24-3/4 C mm 76 81 81 97 122 122 152 178 229 283 330 368 419 470 552 629 1-1/2 1-3/4 1-3/4 1-3/4 2-1/2 2-1/2 2-1/2 2-3/4 3-3/4 4-1/8 4-3/8 5-1/4 5-5/8 6-3/4 7 7-7/8 D mm 38 44 44 44 64 64 64 70 95 105 111 133 143 171 178 260 3/8 1/2 1/2 1/2 5/8 5/8 5/8 3/4 7/8 7/8 7/8 1-1/8 1-1/4 1-1/4 1-3/8 1-1/2 64 E mm 10 13 13 13 16 16 16 19 22 22 22 28 32 32 34 38 1-3/8 1-5/8 1-7/8 2-1/8 2-9/16 2-13/16 3-7/16 4 5-1/8 6-3/8 7-7/16 8-3/8 9-3/8 10-1/2 11-5/8 13-7/8 F mm 34 40 47 53 64 70 87 102 130 162 189 213 238 267 295 352 3/8x11/2 3/8x11/2 3/8x11/2 3/8x11/2 1/2x11/2 1/2x11/2 1/2x11/2 1/2x11/2 5/8x11/2 5/8x2 5/8x2 3/4x2 3/4x21/2 3/4x21/2 3/4x21/2 7/8x3 G mm 10x38 10x38 10x38 10x38 13x38 13x38 13x38 13x38 16x38 16x50 16x50 19x50 19x64 19x64 19x64 22x76 1/4x11/4 1/4x11/4 1/4x11/4 1/4x11/4 3/8x11/2 3/8x11/2 3/8x11/2 3/8x2 3/8x2 1/2x2 1/2x2 1/2x21/2 1/2x3 1/2x3 1/2x3 5/8x4 mm 6x32 6x32 6x32 6x32 10x38 10x38 10x38 10x50 10x50 13x50 13x50 13x64 13x76 13x76 13x76 16x102 EI 494 Single Pipe Roll Material: Steel axle, cast iron roller, malleable iron socket ends Finish: Standard finish is bare metal, Zinc plated, hot dipped galvanized are also available Service: Designed for suspending piping where longitudinal move ment and vertical adjustment is required. Threaded rods sold separately. Approvals: Complies with Manufacturers Standardization Society SP - 69 Type 41 Ordering: Specify part number, pipe size, insulation thickness and finish. EI 494 SINGLE PIPE ROLL A 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 3/4 7/8 7/8 7/8 1 1 1 1 1/4 1 1/2 B mm 10 10 10 13 13 13 16 16 16 19 22 22 22 25 25 25 32 38 4 1/2 4 1/2 4 1/2 5 1/4 5 1/4 5 3/4 7 3/8 7 3/8 8 3/8 9 1/2 11 7/8 13 7/8 15 3/4 17 5/8 20 22 24 5/8 29 5/8 65 C mm 114 1 1/16 114 1 1/4 114 1 3/8 133 1 5/8 133 1 7/8 146 2 1/8 187 2 9/16 187 2 13/16 213 3 7/16 241 4 301 5 1/8 353 6 3/8 400 7 7/16 448 8 3/8 508 9 3/8 558 10 1/2 626 11 5/8 752 13 7/8 mm 27 32 35 41 47 53 65 71 87 102 130 162 189 213 236 267 295 352 Max Loads lbs. kg 600 270 600 270 600 270 600 270 600 270 700 315 750 338 750 338 750 338 1070 482 1350 608 1730 779 2400 1080 3130 1409 3970 1787 4200 1890 4550 2048 6160 2800 INDUSTRIAL PRODUCTS Pipe Socket Size mm Size 1 25 1 1 1/4 32 1 1 1/2 38 1 2 50 2 2 1/2 64 2 3 76 2 3 1/2 89 3 4 102 3 5 127 3 6 152 4 8 203 5 10 254 5 12 305 5 14 356 6 16 406 7 18 457 7 20 508 8 24 610 9 EI 497 Adjustable Pipe Roller Support Material: Steel axle cast iron roller, malleable iron socket ends Finish: Standard finish is bare metal, Zinc plated and hot dipped galvanized are also available. Service: Designed for suspending piping where longitudinal movement and vertical adjustment is required. Threaded rod ordered separately. Ordering: Specify part number, pipe size, insulation thickness and finish. INDUSTRIAL PRODUCTS EI497 ADJUSTABLE PIPE ROLL SUPPORT PIPE Size 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 24 SOCKET mm Size 25 #1 32 #1 38 #1 50 #2 64 #2 76 #2 89 #3 102 #3 127 #3 152 #4 203 #5 254 #5 305 #5 356 #6 406 #7 457 #7 508 #8 610 #9 A 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 3/4 7/8 7/8 7/8 1 1 1 1 1/4 1 1/2 B mm 10 10 10 13 13 13 16 16 16 19 22 22 22 25 25 25 32 38 4 1/2 4 1/2 4 1/2 5 1/4 5 1/4 5 3/4 7 3/8 7 3/8 8 3/8 9 1/2 11 7/8 13 7/8 15 3/4 17 5/8 20 22 24 5/8 29 5/8 C mm 114 1 1/16 114 1 1/4 114 1 3/8 133 1 5/8 133 1 7/8 146 2 1/8 187 2 9/16 187 2 13/16 213 3 7/16 241 4 301 5 1/8 353 6 3/8 400 7 7/16 448 8 3/8 508 9 3/8 558 10 1/2 626 11 5/8 752 13 7/8 66 D mm 27 32 35 41 47 53 65 71 87 102 130 162 189 213 236 558 295 352 12 12 12 12 12 12 12 12 12 12 12 12 12 12 18 18 18 24 mm 305 305 305 305 305 305 305 305 305 305 305 305 305 305 457 457 457 610 Max Loads lbs. kg 600 270 600 270 600 270 600 270 600 270 700 315 750 338 750 338 750 338 1070 482 1350 608 1730 779 2400 1080 3130 1409 3970 1787 4200 1890 4550 2048 6160 2800 EI 125 Standard 2-Bolt Pipe Clamp Material : Zinc Plated Carbon Steel Sizes 1/2” thru 36 “. Also available in in 304 & 316 L Stainless Steel and Galvanized as well. Application : Used to suspend un-insulated industrial pipe lines. Also used with E I Fig. 344 Weldless eye nut. Eye nut allows movement of the pipe in a horizontal direction. Ordering : Specify pipe size, figure number, and material. Approvals : Complies with Manufacturers Standardization Society SP – 69 ( Type 4 ) EI 125 STANDARD 2-BOLT PIPE CLAMP SIZE mm 13 19 25 32 38 50 64 76 89 102 127 152 203 254 305 356 406 457 508 559 610 762 914 5/8 5/8 5/8 5/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1 1 1 1-1/8 1-1/4 1-1/4 1-3/8 1-3/8 1-5/8 2 2 “B” mm 16 16 16 16 22 22 22 22 22 22 22 22 25 25 25 28 32 32 35 35 41 50 50 2-1/2 2-5/8 2-15/16 2-1/4 2-3/4 4-1/2 5 6 6-5/32 6-5/8 8-3/16 10-1/4 12-1/2 15 16-3/4 18 20-1/2 24 25-1/2 31 32-1/4 36-9/16 44-1/2 “C’ mm 64 66 74 82 96 114 128 152 156 168 206 260 318 382 426 458 520 610 648 788 820 928 1130 5/16 5/16 5/16 5/16 5/16 1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4 7/8 7/8 7/8 7/8 7/8 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 “D” mm 8 8 8 8 8 13 13 13 13 16 16 19 19 22 22 22 22 22 32 32 32 38 38 67 1/8x1 1/8x1 1/8x1 1/8x1 1/8x1 1/4 x1 1/4 x1 1/4 x1 1/4 x1 1/4x1-1/4 1/4x1-1/4 3/8x1-1/2 3/8x1-1/2 1/2 x 2 1/2 x 2 1/2x2-1/2 1/2x2-1/2 5/8x2-1/2 5/8 x 3 5/8 x 3 5/8 x 3 3/4 x 4 3/4 x 5 mm 3x25 3x25 3x25 3x25 3x25 6x25 6x25 6x25 6x25 6x32 6x32 10x38 10x38 13x50 13x50 13x64 13x64 16x64 16x76 16x76 16x76 19x102 19x127 Max Loads 650f Lbs/kg 500/225 500/225 500/225 500/225 800/360 1050/473 1050/473 1050/473 1050/473 1050/473 1050/473 1620/729 1620/729 2500/1125 2500/1125 2500/1125 2500/1125 3050/1373 3050/1373 3050/1373 3050/1373 3050/1373 3050/1373 Max Loads 750f Lbs/kg 450/203 450/203 450/203 450/203 720/324 940/423 940/423 940/423 940/423 940/423 940/423 1440/648 1440/648 2230/1004 2230/1004 2230/1004 2230/1004 2720/1224 2720/1224 2720/1224 2720/1224 2720/1224 2720/1224 INDUSTRIAL PRODUCTS 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12 14 16 18 20 22 24 30 36 “A” EI 430 Heavy Duty 2-Bolt Pipe Clamp Material: Carbon Steel Application: Designed for suspending non-insulated heavy duty pipe runs. Also to be used with a weldless eye nut and a welded eye rod. Ordering: Specify figure number and pipe size. Approvals: Complies with Manufacturers’ Standardization Society SP - 69 Type 4. EI 430 HEAVY DUTY 2-BOLT PIPE CLAMP Size A INDUSTRIAL PRODUCTS mm B mm C mm D mm Loads-650ºF mm lbs kg Loads-750ºF lbs kg 3 76 1 25 3-1/4 83 3/4 19 1/4x1-1/2 6x38 3400 1530 3000 1350 4 102 1 25 3-5/8 92 7/8 22 3/8x2 10x50 3550 1598 3150 1418 5 127 1 25 4-5/8 117 7/8 22 3/8x2-1/2 10x64 3550 1598 3150 1418 6 152 1 25 5-1/2 140 1 25 1/2x2-1/2 13x64 4900 2205 4350 1958 8 203 1-1/8 29 7-1/8 181 1 25 1/2x2-1/2 13x64 4900 2205 4350 1958 10 254 1-1/4 32 7-7/8 200 1-1/4 32 5/8x2-1/2 16x64 6000 2700 5400 2430 12 305 1-11/16 42 10-1/8 257 1-1/2 38 3/4x3 18x76 8700 3915 7750 3488 14 356 1-11/16 42 10-1/2 267 1-1/2 38 3/4x4 18x100 9150 4118 8150 3668 16 406 1-11/16 42 11-5/8 295 1-1/2 38 3/4x4 18x100 9150 4118 8150 3668 18 457 1-11/16 42 12-3/4 324 1-1/2 38 3/4x6 18x152 13800 6210 20 508 1-11/16 42 14-1/4 362 1-1/2 38 1x6 25x152 15300 6885 24 610 1x6 25x152 16300 7335 3-1/4 83 17-1/2 445 2-1/4 57 68 EI 125SS Standard 2-Bolt Pipe Clamp Stanless Steel Material : 316-L Stainless Steel Application : Used to suspend non insulated industrial stainless steel pipe lines. Also used with E I Fig. 344 Weldless eye nut. Eye nut allows movement of the pipe in a horizontal direction. Ordering : Specify pipe size, figure number, and material. Approvals : Complies with Manufacturers Standardization Society SP – 69 ( Type 4 ) EI 125 STANDARD 2-BOLT PIPE CLAMP SIZE mm 13 19 25 32 38 50 64 76 89 102 127 152 203 254 305 356 406 457 508 559 610 762 914 5/8 5/8 5/8 5/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1 1 1 1-1/8 1-1/4 1-1/4 1-3/8 1-3/8 1-5/8 2 2 “B” mm 16 16 16 16 22 22 22 22 22 22 22 22 25 25 25 28 32 32 35 35 41 50 50 2-1/2 2-5/8 2-15/16 2-1/4 2-3/4 4-1/2 5 6 6-5/32 6-5/8 8-3/16 10-1/4 12-1/2 15 16-3/4 18 20-1/2 24 25-1/2 31 32-1/4 36-9/16 44-1/2 “C’ mm 64 66 74 82 96 114 128 152 156 168 206 260 318 382 426 458 520 610 648 788 820 928 1130 5/16 5/16 5/16 5/16 5/16 1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4 7/8 7/8 7/8 7/8 7/8 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 mm 8 8 8 8 8 13 13 13 13 16 16 19 19 22 22 22 22 22 32 32 32 38 38 69 “D” Max Loads Max Loads 1/8x1 1/8x1 1/8x1 1/8x1 1/8x1 1/4 x1 1/4 x1 1/4 x1 1/4 x1 1/4x1-1/4 1/4x1-1/4 3/8x1-1/2 3/8x1-1/2 1/2 x 2 1/2 x 2 1/2x2-1/2 1/2x2-1/2 5/8x2-1/2 5/8 x 3 5/8 x 3 5/8 x 3 3/4 x 4 3/4 x 5 650f Lbs/kg 500/225 500/225 500/225 500/225 800/360 1050/473 1050/473 1050/473 1050/473 1050/473 1050/473 1620/729 1620/729 2500/1125 2500/1125 2500/1125 2500/1125 3050/1373 3050/1373 3050/1373 3050/1373 3050/1373 3050/1373 750f Lbs/kg 450/203 450/203 450/203 450/203 720/324 940/423 940/423 940/423 940/423 940/423 940/423 1440/648 1440/648 2230/1004 2230/1004 2230/1004 2230/1004 2720/1224 2720/1224 2720/1224 2720/1224 2720/1224 2720/1224 mm 3x25 3x25 3x25 3x25 3x25 6x25 6x25 6x25 6x25 6x32 6x32 10x38 10x38 13x50 13x50 13x64 13x64 16x64 16x76 16x76 16x76 19x102 19x127 INDUSTRIAL PRODUCTS 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12 14 16 18 20 22 24 30 36 “A” EI 235SS Stainless Steel Standard Clevis Hanger Material : Application : 316L Stainless steel. Designed for suspending non insulated stationary stainless steel pipe, allowing for vertical adjustment. Ordering : Specify pipe size and figure number. Approvals : Complies with Manufacturers Standardization Society SP – 69 Type 1 EI 235 STANDARD CLEVIS HANGER SIZE “A” INDUSTRIAL PRODUCTS mm “B” mm “C’ mm “D” mm Lower mm Material Upper mm Material mm 1/2 13 3/8 10 2-3/8 73 2 13/32 61 1/4 6 1/8x1 3x25 1/8x1 3x25 3/4 19 3/8 10 3-5/32 80 2 9/16 65 1/4 6 1/8x1 3x25 1/8x1 3x25 1 25 3/8 10 3-5/16 84 1/4 6 1/8x1 3x25 1/8x1 3x25 1-1/4 32 3/8 10 3-3/4 95 2-3/4 70 1/4 6 1/8x1 3x25 1/8x1 3x25 1-1/2 38 3/8 10 4-1/16 103 2-7/8 73 1/4 6 1/8x1 3x25 1/8x1 3x25 2 50 3/8 10 4-1/2 114 3-1/4 82 1/4 6 1/8x1 3x25 1/8x1 3x25 2-1/2 64 1/2 13 5-1/2 140 4-1/16 103 3/8 10 3/16x1-3/16 4.5x30 3/16x1-3/16 4.5x30 3 76 1/2 13 6-1/8 155 4-5/16 110 3/8 10 3/16x1-3/16 4.5x30 3/16x1-3/16 4.5x30 3-1/2 89 1/2 13 6-3/4 171 4-3/4 120 3/8 10 3/16x1-3/16 4.5x30 3/16x1-3/16 4.5x30 4 102 5/8 16 7-5/8 193 5-5/16 135 3/8 10 3/16x1-3/16 4.5x30 1/4x1-3/16 6x30 5 127 5/8 16 8-7/8 225 6-1/16 154 1/2 13 3/16x1-3/16 4.5x30 1/4x1-3/16 6x30 6 152 3/4 19 10 254 6-5/8 169 1/2 13 3/16x1-1/2 4.5x38 1/4x1-1/2 6x38 8 203 3/4 19 12-3/4 324 8-3/8 213 5/8 16 3/16x1-1/2 4.5x38 1/4x1-1/2 6x38 10 254 7/8 22 16-5/8 435 11-11/16 297 3/4 19 1/4x1-3/4 6x44 11/32x1-3/4 9x44 12 305 7/8 22 18-11/16 475 312 3/4 19 1/4x2 6x50 11/32x2 9x50 14 356 1 25 20-5/16 533 13-15/16 354 7/8 22 1/4x2 6x50 15/32x2 12x50 16 406 1 25 22-1/16 560 1 25 1/4x2-1/2 6x63 15/32x2-1/2 12x63 18 457 1 25 24-3/4 628 15-11/16 398 1-1/8 28 1/4x2-1/2 6x63 15/32x2-1/2 12x63 20 508 1-1/4 32 27-3/8 695 17-5/16 440 1-1/4 32 11/32x3 9x76 5/8x3 16x76 24 610 1-1/4 32 31-5/8 803 19-9/16 497 1-1/4 32 11/32x3 9x76 5/8x3 16x76 12-1/4 14 355 70 E I 56 3-Bolt Light Duty Pipe Clamp Material : Carbon Steel Application : Designed for suspending high temperature maximum ( 750 * ) pipe runs requiring insulation. Ordering : Specify figure number and pipe size. Approvals : Complies with Manufacturersí Standardization Society SP-69 Type 3. EI56 3-BOLT LIGHT DUTY PIPE CLAMP SIZE 3-1/2 3-1/4 3-9/16 4-3/32 4-3/8 5-5/6 5-11/16 6-1/16 6-1/2 8-1/16 9-13/16 11-13/32 12-23/32 14 13-3/4 14-11/16 15-5/8 18 B mm 89 83 90 104 111 135 145 154 165 205 250 290 303 355 349 373 397 457 1-9/64 1-5/8 1-3/8 2 2 2-5/16 2-9/16 2-13/16 3-3/8 4-1/2 6-5/16 7-11/16 8-11/16 9-15/16 10 11-1/4 12-1/2 14-3/4 C mm 29 41 35 50 50 59 65 72 86 115 160 195 220 252 254 286 318 375 3/8 5/8 5/8 3/4 7/8 1 1 1 1 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2 71 D mm 10 16 16 19 22 25 25 25 25 38 38 38 38 50 50 50 50 50 3/8x1-3/16 3/8x1-3/8 3/8x1-3/8 3/8x1-9/16 3/8x2 1/2x2-3/16 1/2x2-3/16 1/2x2-3/16 5/8x2-3/8 3/4x3-5/32 3/4x3-5/32 7/8x3-9/16 7/8x3-9/16 7/8x3-15/16 7/8x3-15/16 1x4-5/16 1-1/8x4-1/2 1-1/4x4-1/2 E mm mm 3/8x30 1/8x1 3x25 3/8x35 1/8x1 3x25 3/8x35 1/8x1 3x25 3/8x40 9/64x1 3.5x25 3/8x50 9/64x1 3.5x25 1/2x55 1/4x1 6x25 1/2x55 1/4x1 6x25 1/2x55 1/4x1 6x25 5/8x60 1/4x1-1/4 6x32 3/4x80 3/8x1-1/2 10x38 3/4x80 3/8x1-1/2 10x38 7/8x90 15/32x2 12x50 7/8x90 15/32x2 12x50 7/8x100 15/32x2-1/2 12x64 7/8x100 15/32x2-1/2 12x64 1x110 5/8x2-1/2 16x64 1-1/8x115 5/8x3 16x76 1-1/4x115 5/8x3 16x76 INDUSTRIAL PRODUCTS 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8 10 12 14 16 18 20 24 A mm 13 19 25 32 38 50 64 76 102 152 203 254 305 356 406 457 508 610 EI 62 Std. 3-Bolt Pipe Clamp Material : Carbon Steel Application : Designed for suspending heavy-duty, high-temperature pipe runs up to 4” thick insulation. Ordering : Specify part number, insulation thickness, and pipe size. Approvals : Complies with Manufacturers’ Standardization Society SP-69 Type 3. EI 62 STD 3-BOLT PIPE CLAMP INDUSTRIAL PRODUCTS SIZE A B C D E mm mm mm mm mm mm 1/2 13 89 33 16 3/8x30 4 3/4 19 89 35 16 3/8x40 5 1 25 89 35 16 3/8x40 5 1-1/4 32 95 44 16 1/2x45 5 1-1/2 38 105 55 26 5/8x60 5 2 50 130 60 26 5/8x60 6 2-1/2 64 145 65 26 5/8x60 6 3 76 155 75 26 5/8x60 6 3-1/2 89 4 102 170 100 26 3/4x70 10 5 127 178 102 26 3/4x70 10 6 152 225 130 38 7/8x90 10 8 203 255 155 38 7/8x90 10 10 254 290 195 38 1x100 12 12 305 310 210 38 1x100 12 14 356 350 240 51 1-1/4x110 16 16 406 348 254 51 1-1/4x120 16 18 457 373 280 51 1-1/4x120 16 20 508 403 314 51 1-3/8x135 18 24 610 454 365 51 1-3/8x135 18 72 E I 475 Standard U-Bolts Black Material : Carbon Steel Wire Application : Designed as a support, guide, or an anchor for pipe Comes complete with 4 hex nuts. Ordering : Specify fiure number and pipe size. EI 475 STANDARD U BOLTS BLACK SIZE mm 13 19 25 32 38 50 64 76 89 102 127 152 203 254 305 356 406 457 508 610 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 5/8 5/8 3/4 7/8 7/8 7/8 1 1 1 “B” mm 10 10 10 10 10 10 13 13 13 13 13 16 16 19 22 22 22 25 25 25 2-3/8 2-1/2 2-3/4 2-7/8 3 3-5/16 3-13/16 4 4-1/4 4-1/2 5 6-1/16 6-15/16 8-3/8 9-5/8 10-1/4 11-1/4 13 14 16 “C’ mm 60 64 70 73 76 84 97 102 108 114 127 154 176 213 244 260 285 330 356 406 1-5/16 1-1/2 1-3/4 2-1/8 2-3/8 2-13/16 3-7/16 4-1/16 4-1/2 5-1/16 6-1/8 7-3/8 9-3/8 11-5/8 13-3/4 15 17 19-1/8 21-1/8 25-1/8 73 “D” mm 33 38 44 54 60 71 87 103 114 129 156 187 238 295 349 381 432 486 537 638 2 2 2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3-1/2 3-1/2 4 4-1/2 5 5 5 6 6 “E” mm 50 50 50 64 64 64 76 76 76 76 76 89 89 102 114 127 127 127 152 152 15/16 1-1/8 1-3/8 1-3/4 2 2-7/16 2-15/16 3-9/16 4-1/16 4-9/16 5-5/8 6-3/4 8-3/4 10-7/8 12-7/8 14-1/8 16-1/8 18-1/8 20-1/8 24-1/8 mm 24 29 35 44 50 62 75 91 103 116 143 171 222 276 327 359 410 460 511 613 INDUSTRIAL PRODUCTS 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12 14 16 18 20 24 “A” E I 475 L Light U-Bolts Black Material: Carbon Steel Wire Application: Designed as a support, guide, or an anchor for pipe Ordering: Specify figure number and pipe size. Hex nuts sold separately. Approvals: Complies with Manufacturers’ Standardization Society SP-69 Type 24. INDUSTRIAL PRODUCTS EI 475L LIGHT U-BOLTS Size 1/2 3/4 1 1-1/4 1-1/2 2 A mm 13 19 25 32 38 50 1/4 1/4 4/4 1/4 1/4 1/4 B mm 6 1-3/16 6 1-3/8 6 1-5/8 6 1-15/16 6 2-1/4 6 2-7/8 C mm 30 35 41 49 57 73 2 2-1/8 2-1/2 2-7/16 3 3-3/8 74 D mm 50 54 64 62 76 86 1-3/4 2 2 1-3/4 2-1/2 2-1/2 Loads at 650ºF mm 44 50 50 44 64 64 lbs 485 485 485 485 485 485 kg 220 220 220 220 220 220 EI 175 Standard U-Bolts Zinc Plated Material : Zinc Plated Carbon Steel Wire Application : Used as a support, guide, or anchor for pipe. Ordering : Specify pipe size and figure number. Comes complete with 4 hex nuts. Approvals : Complies with Manufacturers Standardization Society SP – 69 Type 24. EI 175 STANDARD U-BOLTS ZINC PLATED SIZE mm 13 19 25 32 38 50 64 76 89 102 127 152 203 254 305 356 406 457 508 610 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 5/8 5/8 3/4 7/8 7/8 7/8 1 1 1 “B” mm 10 10 10 10 10 10 13 13 13 13 13 16 16 19 22 22 22 25 25 25 2-3/8 2-1/2 2-3/4 2-7/8 3 3-5/16 3-13/16 4 4-1/4 4-1/2 5 6-1/16 6-15/16 8-3/8 9-5/8 10-1/4 11-1/4 13 14 16 “C’ mm 60 64 70 73 76 84 97 102 108 114 127 154 176 213 244 260 285 330 356 406 1-5/16 1-1/2 1-3/4 2-1/8 2-3/8 2-13/16 3-7/16 4-1/16 4-1/2 5-1/16 6-1/8 7-3/8 9-3/8 11-5/8 13-3/4 15 17 19-1/8 21-1/8 25-1/8 75 “D” mm 33 38 44 54 60 71 87 103 114 129 156 187 238 295 349 381 432 486 537 638 2 2 2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3-1/2 3-1/2 4 4-1/2 5 5 5 6 6 “E” mm 50 50 50 64 64 64 76 76 76 76 76 89 89 102 114 127 127 127 152 152 15/16 1-1/8 1-3/8 1-3/4 2 2-7/16 2-15/16 3-9/16 4-1/16 4-9/16 5-5/8 6-3/4 8-3/4 10-7/8 12-7/8 14-1/8 16-1/8 18-1/8 20-1/8 24-1/8 mm 24 29 35 44 50 62 75 91 103 116 143 171 222 276 327 359 410 460 511 613 INDUSTRIAL PRODUCTS 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12 14 16 18 20 24 “A” EI 175 L Light U-Bolts Zinc Plated Material: Zinc Plated Carbon Steel Wire Application: Designed as a support, guide, or an anchor for pipe Ordering: Specify figure number and pipe size. Hex nuts sold separately. Approvals: Complies with Manufacturers’ Standardization Society SP-69 Type 24. INDUSTRIAL PRODUCTS EI 175L LIGHT U-BOLTS ZINC PLATED Size 1/2 3/4 1 1-1/4 1-1/2 2 A mm 13 19 25 32 38 50 1/4 1/4 4/4 1/4 1/4 1/4 B mm 6 1-3/16 6 1-3/8 6 1-5/8 6 1-15/16 6 2-1/4 6 2-7/8 C mm 30 35 41 49 57 73 2 2-1/8 2-1/2 2-7/16 3 3-3/8 76 D mm 50 54 64 62 76 86 1-3/4 2 2 1-3/4 2-1/2 2-1/2 Loads at 650ºF mm 44 50 50 44 64 64 lbs 485 485 485 485 485 485 kg 220 220 220 220 220 220 EI 175SS U-Bolts Stainless Steel Material : Stainless Steel Wire Application : Used as a support, guide, or anchor for pipe. Ordering : Specify pipe size and figure number. Comes complete with 4 hex nuts. Approvals : Complies with Manufacturers Standardization Society SP – 69 Type 24. EI 175 U-BOLTS STAINLESS STEEL SIZE mm 13 19 25 32 38 50 64 76 89 102 127 152 203 254 305 356 406 457 508 610 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 5/8 5/8 3/4 7/8 7/8 7/8 1 1 1 “B” mm 10 10 10 10 10 10 13 13 13 13 13 16 16 19 22 22 22 25 25 25 2-3/8 2-1/2 2-3/4 2-7/8 3 3-5/16 3-13/16 4 4-1/4 4-1/2 5 6-1/16 6-15/16 8-3/8 9-5/8 10-1/4 11-1/4 13 14 16 “C’ mm 60 64 70 73 76 84 97 102 108 114 127 154 176 213 244 260 285 330 356 406 1-5/16 1-1/2 1-3/4 2-1/8 2-3/8 2-13/16 3-7/16 4-1/16 4-1/2 5-1/16 6-1/8 7-3/8 9-3/8 11-5/8 13-3/4 15 17 19-1/8 21-1/8 25-1/8 77 “D” mm 33 38 44 54 60 71 87 103 114 129 156 187 238 295 349 381 432 486 537 638 2 2 2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3-1/2 3-1/2 4 4-1/2 5 5 5 6 6 “E” mm 50 50 50 64 64 64 76 76 76 76 76 89 89 102 114 127 127 127 152 152 15/16 1-1/8 1-3/8 1-3/4 2 2-7/16 2-15/16 3-9/16 4-1/16 4-9/16 5-5/8 6-3/4 8-3/4 10-7/8 12-7/8 14-1/8 16-1/8 18-1/8 20-1/8 24-1/8 mm 24 29 35 44 50 62 75 91 103 116 143 171 222 276 327 359 410 460 511 613 INDUSTRIAL PRODUCTS 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 8 10 12 14 16 18 20 24 “A” EI 333 Turnbuckle Material: Forged Steel Application: Designed as a hanger rod connection with up to 6" adjustment. One end has left hand thread while the other has right hand threads. Ordering: Specify figure number and rod size. Approvals: Complies with manufacturers’ Standardization Society SP - 69 Type 13. EI 333 TURNBUCKLE INDUSTRIAL PRODUCTS SIZE 3/8 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-1/2 1-3/4 2 A mm 10 13 16 19 22 25 29 32 38 44 50 6 6 6 6 6 6 6 6 6 6 6 B mm 152 152 152 152 152 152 152 152 152 152 152 7-1/4 7-1/2 7-3/4 8-3/16 8-1/2 9 9-7/32 9-7/32 9-3/4 10-3/8 11 78 C mm 184 190 196 208 216 228 234 234 248 264 280 5/8 3/4 7/8 1-1/8 1-1/4 1-1/2 1-5/8 1-5/8 1-7/8 2-7/32 2-1/2 mm 16 19 22 28 32 38 41 41 48 56 6 EI 339 Forged Steel Clevis Material: Forged Steel Application: Designed as an adjustable hanger rod connection for high temperature pipe runs. Ordering: Specify figure number and rod size Approvals: Complies with Manufacturers’ Standardization Society SP - 69 Type 14. EI 339 FORGED STEEL CLEVIS SIZE A mm B mm C mm D mm E mm F mm mm 10 3-5/8 92 1-9/16 40 1/2 13 5/8 16 5/16 8 1/2 12.7 1/2 13 3-5/8 92 1-9/16 40 1/2 13 5/8 16 5/16 8 5/8 15.8 5/8 16 3-5/8 92 1-9/16 40 5/8 16 5/8 16 5/16 8 3/4 19 3/4 19 4 102 2-1/2 64 3/4 19 1 25 3/8 9.5 7/8 22.2 7/8 22 4 102 2-1/2 64 7/8 22 1 25 3/8 9.5 1 25.4 1 25 5-3/16 132 3 76 1 25 1-1/4 32 1/2 13 1-1/8 28.5 1-1/4 32 5-3/16 132 3 76 1-1/4 32 1-1/4 32 1/2 13 1-3/8 34.9 1-1/2 38 6 152 3-5/8 92 1-1/2 38 1-5/8 41 1/2 13 1-5/8 41.2 1-3/4 44 6 152 4 102 1-1/2 38 1-3/4 44 1/2 13 1-7/8 47.6 2 50 7 178 5 127 1-1/2 64 2-1/4 57 5/8 16 2-1/4 57 79 INDUSTRIAL PRODUCTS 3/8 EI 344 Weldless Eye Nut Material: Forged Steel Application: Designed for use on high temperature pipe runs where flexible connection is required. Ordering: Specify figure number and rod size. Approvals: Complies with manufacturers’ Standardization Society SP - 69 TYPE 16. INDUSTRIAL PRODUCTS EI 344 EYE NUT SIZE mm 3/8 10 1/2 13 5/8 16 3/4 19 7/8 22 1 25 1-1/8 29 1-1/4 32 1-1/2 38 2 50 A 1 1-1/8 1-1/8 1-1/8 1-1/2 1-1/2 1-5/8 1-5/8 1-5/8 4 B mm 25 29 29 29 38 38 41 41 41 102 1-3/8 1-3/8 1-3/8 1-3/8 1-7/8 1-7/8 2-1/4 2-1/4 2-3/8 4 C mm 35 35 35 35 48 48 57 57 60 102 1/2 1/2 1/2 1/2 3/4 3/4 1 1 1 1-1/2 80 D mm 13 13 13 13 19 19 25 25 25 38 2 2 2 2 2-5/8 2-5/8 3-1/4 3-1/4 3-1/2 6-1/4 E mm 50 50 50 50 67 67 83 83 89 159 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 2-1/4 mm 22 22 22 22 29 29 35 35 35 57 EI 80/84 Pipe Protection Saddle 1”and 1 1/2” Material: A-36 Carbon Steel. Application: Designed to protect pipe insulation on high temperature pipe lines. Ordering: Specify figure number, pipe size, and insulation thickness. Approvals: Complies with manufacturers’ Standardization Society SP_69 Type 39 A. EI 84 PIPE PROTECTION SADDLE FOR 1 1/2" INSULATION EI 80 PIPE PROTECTION SADDLE FOR 1" INSULATION Size mm 19 25 32 38 50 64 76 89 102 127 152 203 254 305 356 406 457 508 3 4 4 4 5 5 6 6 6 8 8 10 12 14 16 18 20 24 Size B mm 76 102 102 102 127 127 152 152 152 203 203 254 305 356 406 457 508 610 2 1/16 2 5/16 2 1/2 2 5/8 3 3 1/4 3 1/2 4 4 1/4 4 13/16 5 3/8 6 9/16 7 13/16 9 9 11/16 10 3/4 11 13/16 13 1/16 mm 52 59 64 67 76 83 89 102 108 122 137 167 198 229 246 273 300 332 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 81 Roller Size mm 19 25 32 38 50 64 76 89 102 127 152 203 254 305 356 406 457 508 4 5 5 5 6 6 6 6 8 10 10 12 14 16 18 20 24 24 B mm 102 127 127 127 152 152 152 152 203 254 254 305 356 406 457 508 610 610 2 3/4 2 7/8 3 1/16 3 1/4 3 1/2 4 4 5/16 4 9/16 4 7/8 5 1/2 5 7/8 7 1/16 8 5/8 9 1/2 10 3/16 11 1/4 12 5/16 13 9/16 mm 70 73 78 83 89 102 110 116 124 140 149 179 211 241 259 286 313 344 INDUSTRIAL PRODUCTS 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 Roller Size EI 88/90 Pipe Protection Saddle 2” and 2 1/2” Material: A-36 Carbon Steel. Application: Designed to protect pipe insulation on high temperature pipe lines. Ordering: Specify figure number, pipe size, and insulation thickness. Approvals: Complies with manufacturers’ Standardization Society SP_69 Type 39 A. EI 90 PIPE PROTECTION SADDLE FOR 2 1/2" INSULATION EI 88 PIPE PROTECTION SADDLE FOR 2" INSULATION INDUSTRIAL PRODUCTS Size 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 10 12 14 16 18 20 Roller Size mm 19 25 32 38 50 64 76 89 102 127 152 203 254 305 356 406 457 508 5 6 6 6 6 6 8 8 8 10 10 12 16 16 18 20 24 24 Size B mm 127 152 152 152 152 152 203 203 203 254 254 305 406 406 457 508 610 610 3 5/16 3 1/2 3 5/8 4 4 1/4 4 1/2 4 13/16 5 1/8 5 3/8 6 6 7/8 7 9/16 9 1/16 10 3/16 10 7/8 11 3/16 12 7/8 14 1/16 mm 2 50 2 1/2 64 3 76 3 1/2 89 4 102 5 127 6 152 8 203 10 254 12 305 14 356 16 406 18 457 20 508 mm 84 89 92 102 108 114 122 130 137 152 175 192 230 259 276 284 327 359 82 Roller Size 8 8 8 8 10 12 12 14 16 18 20 24 24 24 B mm 203 203 203 203 254 305 305 356 406 457 508 610 610 610 4 3/4 5 3/8 5 3/8 5 3/8 6 6 5/8 7 8 1/4 9 5/8 10 1/2 11 3/8 12 1/4 13 1/2 14 5/8 mm 121 137 137 137 152 168 178 210 244 267 289 311 343 371 EI 92/95 Pipe Protection Saddle 3”and 4” Material: A-36 Carbon Steel. Application: Designed to protect pipe insulation on high temperature pipe lines. Ordering: Specify figure number, pipe size, and insulation thickness. Approvals: Complies with manufacturers’ Standardization Society SP_69 Type 39 A. EI 95 PIPE PROTECTION SADDLE FOR 4" INSULATION EI 92 PIPE PROTECTION SADDLE FOR 3" INSULATION Size 8 8 8 8 10 12 12 14 16 18 20 24 24 24 Size B mm 203 203 203 203 254 305 305 356 406 457 508 610 610 610 5 3/8 5 5/8 6 6 5/16 6 9/16 7 1/8 7 5/8 9 10 1/8 11 1/8 11 3/4 12 7/8 14 3/16 15 7/8 mm 137 143 152 160 167 181 194 229 257 283 298 327 360 403 4 5 6 8 10 12 14 16 18 20 83 Roller Size mm 102 127 152 203 254 305 356 406 457 508 12 14 16 18 20 24 24 24 24 24 B mm 305 356 356 406 457 508 610 610 610 610 7 5/8 8 3/16 9 10 1/8 11 1/4 12 3/8 12 7/8 14 1/8 15 1/2 17 mm 194 210 229 257 286 314 327 359 394 432 INDUSTRIAL PRODUCTS mm 2 50 2 1/2 64 3 76 3 1/2 89 4 102 5 127 6 152 8 203 10 254 12 305 14 356 16 406 18 457 20 508 Roller Size EI 203 Insulation Protection Shield Material: Zinc Plated Carbon Steel. Application: Designed to protect pipe insulation when used with hangers. Ordering: Specify figure number, pipe size, and insulation thickness. When ordering look at the selection table below, find the pipe size required and the insulation thickness you have to determine the shield number you will require. Approvals: Complies with Manufacturers’ Standardization Society SP-69 Type 40. EI 203 INSULATION PROTECTION SHIELD INDUSTRIAL PRODUCTS SELECTION TABLE Pipe Size mm 1/2 13 3/4 19 1 25 11/4 32 11/2 38 2 50 21/2 64 3 76 31/2 89 4 102 5 127 6 152 8 203 10 254 12 305 14 356 A-Insulation Thickness 1/2 3/4 1 11/2 1 1 1 1 2 4 1 2 3 5 2 3 3 6 2 3 4 6 3 4 5 7 4 5 6 7 5 6 7 8 8 9 8 9 11 12 12 13 14 15 16 17 18 19 19 20 2 6 7 7 7 8 8 9 10 10 13 14 16 18 20 21 B Size Number of Sheild C mm D mm mm Size of Hanger mm 0 1-7/8 48 12 305 3/64 1.2 1-1/2 38 1 2-3/8 60 12 305 3/64 1.2 2 50 2 2-7/8 73 12 305 3/64 1.2 21/2 64 3 2-1/2 89 12 305 3/64 1.2 3 76 4 4 102 12 305 3/64 1.2 31/2 89 5 4-1/2 114 12 305 3/64 1.2 4 102 6 5 127 12 305 3/64 1.2 5 127 7 5-19/32 142 12 305 3/64 1.2 5 127 8 6-5/8 168 12 305 1/16 1.5 6 152 9 7-5/8 194 12 305 1/16 1.5 8 203 10 8-5/8 220 12 305 1/16 1.5 8 203 11 7-5/8 194 18 457 1/16 1.5 8 203 12 8-5/8 220 18 457 1/16 1.5 8 203 13 9-19/32 244 18 457 1/16 1.5 10 254 14 10-25/32 274 18 457 1/16 1.5 10 254 15 11-3/4 298 24 610 5/64 2.0 12 305 16 12-3/4 324 24 610 5/64 2.0 12 305 17 14 356 24 610 5/64 2.0 14 356 18 15 382 24 610 5/64 2.0 16 406 19 16 406 24 610 5/64 2.0 16 406 20 17 432 24 610 5/64 2.0 18 457 21 18 458 24 610 3/32 2.5 18 457 84 HANGERS ATTACHMENTS AND STRUT PRODUCTS Hangers attachments offered in this section are designed to suspend pipe and or threaded rod from beams, concrete and other structural surfaces by bolting or welding. Strut products offered in this section offer a wide range of different products all designed for supporting pipe. Materials: Carbon steel and Pre-Galvanized steel are the standard materials used for products in this section. All products in this section are also available in 316 Stainless Steel upon request. Finishes: Attachments in this section are available in serveral different finishes. Epoxy coated, Zinc Plated, and standard black finishes are available. Strut and strut products are supplied standard galvanized finish. EI 240 Standard Pipe Stay Material: Epoxy Coated Carbon Steel Application: Designed for use with Carbon Steel pipe or Copper pipe in residential or light commercial projects. Ordering: Specify figure number pipe size, carbon steel pipe or Copper pipe. EI240 STANDARD PIPE STAY Size A B 2-1/2 2-1/2 3-1/4 3-1/4 4 4-1/2 5 87 D mm 64 64 83 83 102 114 127 1-3/4 1-3/4 2 2 3 3 3-1/2 E mm 44 44 50 50 76 76 89 11/16 15/16 1-3/16 1-15/32 1-3/4 1-15/16 2-3/8 mm 17 24 30 37 44 49 60 HANGER ATTACHEMENTS AND STRUT PRODUCTS mm mm mm 1/2 13 2-13/64 56 1-15/32 37 3/4 19 2-13/64 56 1-15/32 37 1 25 2-9/16 65 1-3/4 44 1-1/4 32 2-9/16 65 1-3/4 44 1-1/2 38 3-5/8 92 2-1/2 64 2 50 4-1/4 108 2-13/16 71 2-1/2 64 4-3/8 111 2-15/16 75 C EI 245 Extended Pipe Stay Material: Epoxy coated Carbon Steel Application: Designed for use with Carbon Steel pipe or Copper pipe in residential or light commercial projects, where a higher elevation is required. Ordering: Specify figure number pipe size, Carbon Steel pipe or Copper. EI 245 EXTENDED PIPE STAY HANGER ATTACHEMENTS AND STRUT PRODUCTS Size mm 1/2 13 3/4 19 1 25 1-1/4 32 A 3-1/4 3-1/4 3-3/4 3-7/8 B mm 83 83 95 99 2-1/2 2-1/2 2-3/4 2-3/4 C mm 64 64 70 70 2-1/2 2-1/2 3-1/4 3-1/4 88 D mm 64 64 83 83 1-3/4 1-3/4 2 2 E mm 44 44 50 50 1-1/16 15/16 1-3/16 1-15/32 mm 17 24 30 37 E I 350 Side Beam Bracket Material : Carbon Steel Application : Designed for attaching a hanger rod to the side of beams or walls. Ordering : Specify figure number and Rod size. EI 350 SIDE BEAM CLAMP Rod Size Hole Size”H” 7/16 9/16 11/16 13/16 15/16 mm 11 14 17.5 21 24 2 2 3 3-1/2 3-1/2 “B” mm 51 51 76 89 89 1-7/8 1-7/8 3 3-7/16 3-1/2 89 “C” mm 47 47 76 87 89 1/2 13/16 1 1-1/4 1-1/4 “D” mm 13 21 26 32 32 1/4x1-5/8 1/4x1-5/8 3/8x2 3/8x2 1/2x2 mm 6x41 6x41 10x50 10x50 13x50 HANGER ATTACHEMENTS AND STRUT PRODUCTS 3/8 1/2 5/8 3/4 7/8 mm 10 13 16 19 22 “A” EI 330 Heavy Duty Beam Attachment Material: Carbon Steel Application: Designed for attaching hanger rod to the bottom of structural steel where heavy loads and large hanger rod sizes are re quired. Can be welded in place in either upright or inverted position. Ordering: Specify figure number, rod size and with or without a bolt. Approvals: Complies with Manufacturers’ Standardization Society SP - 69 Type 22. EI 330 HEAVY DUTY BEAM ATTACHMENT HANGER ATTACHEMENTS AND STRUT PRODUCTS Size A 3/8 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-1/2 1-3/4 2 2-1/4 mm 10 13 16 19 22 25 29 32 38 44 50 57 2-1/2 64 B 2-1/8 2-1/8 2-1/8 2-3/8 3-1/8 3-1/4 3-1/2 3-1/2 4 5 5 6 mm 54 54 54 60 79 83 89 89 102 127 127 152 6 152 C 7/8 7/8 7/8 1-1/8 1-1/4 1-1/2 1-1/2 2 2-1/2 2-3/4 3-1/4 3-1/2 mm 22 22 22 28 32 38 38 50 64 70 83 89 3-3/4 95 90 D 1-5/8 1-5/8 1-11/16 1-11/16 2 2 2-3/8 2-1/2 3 3-3/4 3-3/4 4-1/4 mm 41 41 43 43 51 51 60 64 76 95 95 108 1/4x2 1/4x2 1/4x2 3/8x2-1/2 3/8x2-1/2 1/2x3 1/2x3 5/8x4 3/4x4 3/4x5 3/4x6 3/4x6 mm 6x50 6x50 6x50 10x64 10x64 12x76 12x76 16x102 18x102 18x127 18x152 18x152 4-1/2 114 3/4x6 18x152 EI 330 B Heavy Duty Beam Attachment Material: Carbon Steel Application: Designed for attaching hanger rod to the bottom of structural steel where heavy loads and large hanger rod sizes are required. Can be welded in place in either upright or inverted position. Ordering: Specify figure number, rod size and with or without a bolt. Approvals: Complies with Manufacturers’ Standardization Society SP - 69 Type 22. EI 330B HEAVY DUTY BEAM ATTACHMENT Size mm 10 13 16 19 22 25 29 32 38 44 50 57 64 2-1/8 2-1/8 2-1/8 2-3/8 3-1/8 3-1/4 3-1/2 3-1/2 4 5 5 6 6 B mm 54 54 54 60 79 83 89 89 102 127 127 152 152 7/8 7/8 7/8 1-1/8 1-1/4 1-1/2 1-1/2 2 2-1/2 2-3/4 3-1/4 3-1/2 3-3/4 C mm 22 22 22 28 32 38 38 50 64 70 83 89 95 D mm 41 41 43 43 51 51 60 64 76 95 95 108 114 1-5/8 1-5/8 1-11/16 1-11/16 2 2 2-3/8 2-1/2 3 3-3/4 3-3/4 4-1/4 4-1/2 91 1/4x2 1/4x2 1/4x2 3/8x2-1/2 3/8x2-1/2 1/2x3 1/2x3 5/8x4 3/4x4 3/4x5 3/4x6 3/4x6 3/4x6 E mm 6x50 6x50 6x50 10x64 10x64 12x76 12x76 16x102 18x102 18x127 18x152 18x152 18x152 1/2x3 1/2x3 3/4x3 7/8x3-1/2 1x4 1-1/8x6 1-1/4x6 1-1/2x7 1-3/4x8 2x10 2-1/4x10 2-1/2x11-1/2 2-3/4x13 mm 13x76 16x76 19x76 22x89 25x102 28x152 32x152 38x178 44x203 50x254 57x254 64x292 70x330 HANGER ATTACHEMENTS AND STRUT PRODUCTS 3/8 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 A E I 22 Z Zinc Plated Ceiling Flange Material : Zinc Plated Malleable Iron. Application : Designed for attaching to a wooden beam or structure where a hanger rod or threaded rod can be connected to support a pipe hanger. Ordering : Specify figure number and rod size required. EI 22Z CEILING FLANGE ZINC PLATED HANGER ATTACHEMENTS AND STRUT PRODUCTS SIZE 3/8 1/2 “A” mm 10 13 2-3/4 2-3/4 “B” mm 70 70 92 1-1/4 1-1/4 “C” mm 32 32 2 2 mm 50 50 EI U927 Strut Channel (1 5/8 x 1 5/8) CHANNEL EI U 927 Material: Channels are accurately and carefully cold formed to size from low-carbon strip steel. Steel: Pre-Galvanized 12 Ga. (2.7 mm). HANGER ATTACHEMENTS AND STRUT PRODUCTS 93 EI U928 Strut Channel (1 5/8 x 7/8) CHANNEL EI U 928 Channels are accurately and carefully cold formed to size from low-carbon strip steel. Steel: Pre-Galvanized 12 Ga. (2.7 mm). HANGER ATTACHEMENTS AND STRUT PRODUCTS Material: 94 EI U929 Spring Nut with Spring ● Spring Nuts unless noted otherwise, are punch-press made from hot rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576,A635 or A36. ● The fitting steel also meets the physical requirements of ASTM A570 GR 33. The picking of the steel products a smooth surface free from scale. Size and Thread P1006-1420 P1008 P1010 P1012S P1023S 1/4” - 20 3/8” - 16 1/2” - 13 5/8” - 11 3/4” - 10 95 Weight Lbs. 7 10 12 21 21 kg. 3.2 4.5 5.4 9.5 9.5 HANGER ATTACHEMENTS AND STRUT PRODUCTS Part Number HANGER ATTACHEMENTS AND STRUT PRODUCTS EI U930 Spring Nut less Spring ● Spring Nuts unless noted otherwise, are punch-press made from hot rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576,A635 or A36. ● The fitting steel also meets the physical requirements of ASTM A570 GR 33. The picking of the steel products a smooth surface free from scale. Part Number Size and Thread P3006-1420 P3008 P3010 1/4” - 20 3/8” - 16 1/2” - 13 96 Weight Lbs. 6 9 11 kg. 2.7 4.1 5.0 EI U931 Strut Clamp for Pipe ● Fittings unless noted otherwise, are punch-press made from hot rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576,A635 or A36. ● The fitting steel also meets the physical requirements of ASTM A570 GR 33. The picking of the steel products a smooth surface free from scale. Part Num. P1109 P1111 P1112 P1113 P1114 P1115 P1117 P1118 P1119 P1120 P1121 P1123 P1124 P1126 Pipe Size 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6 8 EI U931 STRUT CLAMP for PIPE Thickness Gage mm 16 1.5 16 1.5 14 1.9 14 1.9 14 1.9 12 2.7 12 2.7 12 2.7 12 2.7 11 3.0 11 3.0 11 3.0 10 3.4 10 3.4 97 Weight/C Lbs. kg 10 4.5 11 5.0 15 6.8 17 7.7 19 8.6 29 13.2 34 15.4 40 18.1 47 21.3 62 28.1 67 30.4 80 36.3 102 46.3 130 59.0 Design Load Lbs. kN 400 1.8 400 1.8 600 2.7 600 2.7 600 2.7 800 3.6 800 3.6 800 3.6 800 3.6 1000 4.4 1000 4.4 1000 4.4 1000 4.4 1000 4.4 HANGER ATTACHEMENTS AND STRUT PRODUCTS O.D. Size mm .675 17.1 .840 21.3 1.050 26.7 1.315 33.4 1.660 42.2 1.900 48.3 2.375 60.3 2.875 73.0 3.500 88.9 4.000 101.6 4.500 114.3 5.563 141.3 6.625 168.3 8.625 219.1 EI U932 Strut Clamps for O.D.Tubing ● Fittings unless noted otherwise, are punch-press made from hot rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576,A635 or A36. ● The fitting steel also meets the physical requirements of ASTM A570 GR 33. The picking of the steel products a smooth surface free from scale. EI U932 STRUT CLAMP for O.D. PIPE HANGER ATTACHEMENTS AND STRUT PRODUCTS Part No. P2025 P2027 P2029 P2031 P2033 P2035 P2037 P2039 O.D. Size In mm 3/8 9.5 5/8 15.9 7/8 22.2 1 1/8 28.6 1 3/8 34.9 1 5/8 41.3 1 7/8 47.6 2 1/8 54.0 Weight/C Lbs. kg 8 3.6 10 4.5 12 5.4 15 6.8 17 7.7 19 8.6 28 12.7 32 14.5 98 Design Load Lbs (kN) 400 (1.8) 600(2.7) 800(3.6) EI U933 90º Angle Bracket ● Fittings unless noted otherwise, are punch-press made from hot rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576,A635 or A36. ● The fitting steel also meets the physical requirements of ASTM A570 GR 33. The picking of the steel products a smooth surface free from scale. HANGER ATTACHEMENTS AND STRUT PRODUCTS 99 EI U934 2-Hole Flat Plate Fittings unless noted otherwise, are punch-press made from hot rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576,A635 or A36. ● The fitting steel also meets the physical requirements of ASTM A570 GR 33. The picking of the steel products a smooth surface free from scale. HANGER ATTACHEMENTS AND STRUT PRODUCTS ● 100 EI U935 Q Deck Hanger Q Deck Hanger The Q DECK HANGER is the only hanger on the market designed to suspend threaded tod from Q Deck. ● The fastest, most economical way to hang plumbing pipe, light fixtures, sheet metal duct, display fixtures, etc. from Q deck. ● Eliminate unsightly holes chiseled or punched in the side of Q deck; weakening the deck. Also the use of expensive Caddy Clips that were not designed to hold on Q deck. ● Replace miscellaneous washers, angles, brackets on rods, etc. dropped down from the top, and not fastened down, which can damage roof insulation if pushed up when working below at a later date. ● The Q DECK HANGER can be used as a pre-insert in concrete when used on top of deck, by threading the rod up 2 1/2" and putting a hex nut on the rod, where there is concrete poured on top of Q deck. ● Lab tests on 23 gauge Q deck with 10 x 3/4 tek screws show the Q deck slotted at the screws holes at 1.130 lbs. On the bottom and1,570 lbs. On the top. Recommended load at 4-1 safety factor is 285lbs. On the bottom and 390 lbs. On top. ● Available in 1/4, 3/8, 1/2. 101 HANGER ATTACHEMENTS AND STRUT PRODUCTS ● THREADED PRODUCTS Threaded products offered in this section are designed to reduce installation time. A wide range of types and sizes are available for various applications. Material: For maximum loading designs carbon steel is used in the manufacturing of standard threaded rod products. A-316L Stainless Steel is used for Stainless Steel Rod. Finishes: The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black. Electro Galvanized Zinc ( ASTM A123 ) are all available from stock. A 316 L Stainless steel is also available from stock. EI 925 All Threaded Rod Black Only available in Western Canada Material: A 1008 - 1018 Carbon Steel. Application: Designed for use in pipe hanger assembles or supporting standard pipe hangers to a structure. Ordering: Specify figure number and finish. EI925 ALL THREADED ROD - BLACK Rod Size mm 6 White 8 Beige 10 Black 13 Yellow 16 Brown 10 Green 22 Orange 25 Light Blue Threads Per Inch 20 18 16 3 11 10 9 8 10' Lengths Weight Per Length kg 1.9 0.88 2.4 1.10 2.9 1.33 5.9 2.34 8.1 3.68 11.7 5.30 15.8 7.20 20.7 9.42 105 12' Lengths Weight Per Length kg 2.3 1.06 2.9 1.33 3.5 1.59 6.2 2.83 9.7 4.42 14 6.36 19 8.64 25 11.3 3' Lengths Weight Per Length kg 0.6 0.27 0.7 0.33 0.9 0.40 1.6 0.71 2.4 1.11 3.5 1.59 4.8 2.16 6.2 2.83 THREADED PRODUCTS 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 Color Code EI 926 All Threaded Rod Zinc Plated Only available in Western Canada Material: A 1008 - 1018 Carbon Steel. Application: Designed for use in pipe hanger assembles or supporting standard pipe hangers to a structure. Ordering: Specify figure number and finish. EI926 ALL THREADED ROD - ZINC PLATED Rod Size mm 6 White 8 Beige 10 Black 13 Yellow 16 Brown 10 Green 22 Orange 25 Light Blue Threads Per Inch 20 18 16 3 11 10 9 8 THREADED PRODUCTS 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 Color Code 10' Lengths Weight Per Length kg 1.9 0.88 2.4 1.10 2.9 1.33 5.9 2.34 8.1 3.68 11.7 5.30 15.8 7.20 20.7 9.42 106 12' Lengths Weight Per Length kg 2.3 1.06 2.9 1.33 3.5 1.59 6.2 2.83 9.7 4.42 14 6.36 19 8.64 25 11.3 3' Lengths Weight Per Length kg 0.6 0.27 0.7 0.33 0.9 0.40 1.6 0.71 2.4 1.11 3.5 1.59 4.8 2.16 6.2 2.83 EI 926SS All Threaded Rod Stainless Steel Only available in Western Canada Material: Stainless Steel. Application: Designed for use in pipe hanger assembles or supporting standard pipe hangers to a structure. Ordering: Specify figure number and finish. EI926SS ALL THREADED ROD - STAINLESS STEEL Rod Size 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 Color Code mm 6 White 8 Beige 10 Black 13 Yellow 16 Brown 10 Green 22 Orange 25 Light Blue Threads Per Inch 20 18 16 3 11 10 9 8 10' Lengths Weight Per Length kg 1.9 0.88 2.4 1.10 2.9 1.33 5.9 2.34 8.1 3.68 11.7 5.30 15.8 7.20 20.7 9.42 12' Lengths Weight Per Length kg 2.3 1.06 2.9 1.33 3.5 1.59 6.2 2.83 9.7 4.42 14 6.36 19 8.64 25 11.3 3' Lengths Weight Per Length kg 0.6 0.27 0.7 0.33 0.9 0.40 1.6 0.71 2.4 1.11 3.5 1.59 4.8 2.16 6.2 2.83 THREADED PRODUCTS 107 E I 425 Coach Screw Rod Material : Carbon Steel Wire Application : Coach screw rods are used to support a hanger from a wooden joist. Coach screw rods have a lag thread on one end and a machine thread on the other end. Ordering : Specify figure number and rod size required. EI 425 COACH SCREW RODS THREADED PRODUCTS SIZE 3/8x4 3/8x6 3/8x8 3/8x10 3/8x12 1/2x6 1/2x8 “A” mm 10x102 10x152 10x203 10x254 10x305 13x152 13x203 3/8 3/8 3/8 3/8 3/8 1/2 1/2 “B” mm 10 10 10 10 10 13 13 4 6 8 10 12 6 8 108 “C” mm 102 152 203 254 305 152 203 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 “D” mm 48 48 48 48 48 48 48 2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 mm 50 64 64 64 64 64 64 E I 450 Steel Rod Couplings Material : Zinc Plated Carbon Steel. Application : Rod couplings are used to join two pieces of threaded rod together in order to support a pipe hanger holding pipe. Ordering : Specify fiqure number and rod size required. EI 450 STEEL ROD COUPLINGS SIZE 1/4 3/8 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 “B” mm 6 10 13 16 19 22 25 32 38 7/8 1-3/4 1-3/4 2 2-1/4 2-1/2 2-1/2 3 4 109 “C” mm 22 44 44 50 56 64 64 76 102 5/16 5/16 3/8 1/2 9/16 mm 8 8 10 13 14 THREADED PRODUCTS mm 1/4 6 3/8 10 1/2 13 5/8 16 3/4 19 7/8 22 1 25 1-1/4 32 1-1/2 38 “A” EI W921 Machine Thread Rods Left and Right Threads Material : A-1008-1018 Steel Wire. Application : Designed for use in pipe hanger assemblies. Ordering : Specify part number and rod size. THREADED PRODUCTS EIW 921THREADED ROD LEFT & RIGHT THREADS A B Thread Size mm mm 3/8 9.5 2 1/2 64 1/2 13 2 1/2 64 5/8 16 2 1/2 64 3/4 19 3 76 7/8 20 3 1/2 89 1 25 4 102 1 1/8 28 4 1/2 114 1 1/4 32 5 127 1 1/2 38 6 152 1 3/4 44 7 178 2 50 8 203 2 1/4 57 9 229 2 1/2 64 10 254 2 3/4 70 11 279 3 76 12 305 3 1/4 83 13 330 3 1/2 89 14 356 3 3/4 95 15 381 110 EI W922 Welded Eye Rod Right Hand Thread Material : A-1008-1018 Steel Wire. Application : Designed for use in hanger supports to eliminate possible bending of threaded rod. Ordering : Specify part number and rod size. EIW 922 WELDED EYE ROD RIGHT HAND THREAD mm 9.5 13 16 19 20 25 28 32 38 44 50 111 B Eye I.D. 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2 1 3/4 2 2 1/4 mm 13 16 19 20 25 28 32 38 44 50 57 THREADED PRODUCTS A Treaded Size 3/8 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2 1 3/4 2 EI W923 Hanger Rod Right Hand Thread Material : A-1008-1018 Steel Wire. Application : Designed for use in pipe hanger assemblies. Ordering : Specify part number and rod size. THREADED PRODUCTS EIW 923 THREADED ROD RIGHT HAND THREADS A B Thread Size mm mm 3/8 9.5 2 1/2 64 1/2 13 2 1/2 64 5/8 16 2 1/2 64 3/4 19 3 76 7/8 20 3 1/2 89 1 25 4 102 1 1/8 28 4 1/2 114 1 1/4 32 5 127 1 1/2 38 6 152 1 3/4 44 7 178 2 50 8 203 2 1/4 57 9 229 2 1/2 64 10 254 2 3/4 70 11 279 3 76 12 305 3 1/4 83 13 330 3 1/2 89 14 356 3 3/4 95 15 381 112 EI 01/02 Swivel Nuts Material: Zinc Plated Carbon Steel. Application: Nut used for E.I. 100 swivel Ring Hanger which allows for vertical adjustment. Ordering: Specify figure number and rod size. E.I. 01 for 3/8" E.I. 02 for 1/2" rod. EI01/02 SWIVEL NUTS FIG# 3/8 1/2 A mm 10 13 7/8 1 1/8 113 B mm 22 28 11/16 1 mm 17.5 25 THREADED PRODUCTS EI 01 EI 02 SIZE EI 03 Hex Nuts Material: Zinc plated carbon steel. Ordering: Specify figure number and rod size. EI03 HEX NUTS Size Weight/100 Lbs. kg 0.74 0.34 1.6 0.73 3.75 1.7 7.33 3.33 11.9 5.41 19 8.64 28.3 12.9 THREADED PRODUCTS 1/4 3/8 1/2 5/8 3/4 7/8 1 mm 6 10 13 16 19 22 25 114 EI 04 Washer Material: Zinc plated carbon steel. Ordering: Specify figure number and size. EI 04 WASHERS Size 1/4 3/8 1/2 5/8 3/4 7/8 1 Weight/100 Lbs. kg 0.6 0.3 1.3 0.6 3.7 1.7 7.8 3.5 10 4.5 13.9 6.3 17 7.7 mm 6 10 13 16 19 22 25 THREADED PRODUCTS 115 EI 05 Wood Drive Screws Material: Zinc plated carbon steel. Application: For fastening light load attachments to wood beams. Ordering: Specify figure number and screw size #2 EI 05 WOOD DRIVE SCREW Size THREADED PRODUCTS 16 Length mm 2 50 116 Wgt/100 kg 2.2 1 CCTF LOOKING BACK AND BEYOND General Terms And Conditions CCTF was incorporated in Canada in 1952 as Clyde Tube Forging, a manufacturer of butt weld fittings originally from Scotland. EMCO Limited purchased the company in 1954. The new management immediately began broadening its sales base by distributing other complementary industrial piping products in a Master Distributor capacity. Today CCTF is Canada’s largest master distributor of industrial piping products. CCTF operates from a national network of three service centres located in Oakville Ontario, Edmonton Alberta, and Delta British Columbia. With over 150,000 square feet of warehouse space and a combined total of 25 acres of outside yard space, CCTF has all of the combined components required by such a master distributor. Catalogue Weights, Dimensions, and Design Loads 1) Material and Design 2) Supplier Relations Our focus on quality has long impacted our procurement policies and the suppliers we partner with. CCTF has chosen to represent many of the worlds leading manufactures of industrial piping products. Product Breadth With well over 6,000 products SKU items in our inventory system today, CCTF offers an ever growing array of both carbon steel and stainless steel industrial piping components. CCTF continues to pro-actively “SHOP THE WORLD” in search of mew products and suppliers and will continue to add new lines to our offering in the years to come. Service CCTF’s commitment to service is a commitment to our customers and their needs. Some of our service centres operate on a staggered Two- shift basis, that provides our customers with faster deliveries and longer working days in which to access our inventories. Our sales people are always available for emergency services if required. With this winning combination we can provide the service our customers demand. With all of these customer benefits its no wonder that we have become known as “THE INDUSTRIAL CHOICE” for piping products in Canada. Product designs and materials are subject to change without notice. Defective Materials 3) Going in to the next century, CCTF’s market leading position is underpinned by four main strengths: Quality Assurance Systems With a manufacturer’s pedigree in previous years, CCTF has long been known for it emphasis on Quality Systems and Products. Today CCTF can be found on the majority of corporate product approval lists across Canada, and we continue to identify the products we sell with the CCTF logo wherever practical. CCTF is able to offer all of its customers the assurance of our ISO 9002-94 registered QA program in all of our facilities. Catalogue weights and dimensions are careful estimates, but not guaranteed. Load designs are calculated on test results of samples after being submitted or by calculations of static load applications. We will replace any material, which we find at our discretion to be defective in material or workmanship, provided that it has been used for the purpose intended. Our obligation with respect to material found by us to be defective shall be limited to replacement of the defective product only. In no event shall we pay for labor, installation costs, travel or any other expense for defective products. Taxes 4) All prices quoted for product in this catalogue do not include any Provincial, Federal, State, or Foreign Country taxes. All taxes are to be added to any price received from us. Delays in Delivery 5) CCTF shall not be responsible for any delay in shipping products due to fires, strikes, acts of god, delays in transportation, or labor situations that are beyond our control. In the event of such a delay our shipping date to you shall be extended for the period equal to the time lost by such a delay. Returns 6) No goods purchased from CCTF may be returned for credit without receiving an R.G.A. number from us first. All goods returned to us for credit must have been originally purchased from CCTF Any goods returned to us that are found not to be supplied by us will no be considered for credit. Any goods returned to us for credit must be in a re-salable condition in order to receive any credit. Short Shipment 7) Claims for short shipment of product must be received by us in writing within 10 days of receipt of your shipment. Minimum Invoice Charge 8) There is a minimum $50.00 Invoice charge applicable for all hanger products. Master Distributor 9) CCTF is a Master Distributor and a material supplier and not a construction sub-contractor. We assume no responsibility for any terms, conditions, or special provisions contained in any contract between the purchaser and any other party. CCTF OAKVILLE 1387 CORNWALL ROAD OAKVILLE, ONTARIO L6J 7T5 TOLL FREE: 1-888-399-2283 TEL: 905-842-2283 FAX: 905-842-1466 www.cctf.com CCTF EDMONTON 5407 - 53 AVENUE N.W. EDMONTON, ALBERTA T6B 3G2 TOLL FREE: 1-800-661-3633 TEL: 780-463-8700 FAX: 780-463-7433 www.cctf.com CCTF DELTA #4 - 480 AUDLEY BLVD. ANNACIS BUSINESS PARK DELTA, B.C. V3M 5S4 TEL: 604-540-6177 FAX: 604-540-2836 www.cctf.com