Intraoral Aesthetic Archwires

Use Instructions
Intraoral Aesthetic Archwires
The Intraoral Aesthetic Archwire is a component of the orthodontic appliance, intended to transmit
clinical forces generated by the integration between the archwire and the brackets, promoting the
movement of the teeth. The Archewire is set in the slot of brackets, tubes or other orthodontic
accessories, correcting the teeth’s position during dental treatment, through the teeth misalignment.
Use Indication:
a) Angle Classification:
- Class 1;
- Class 2;
- Class 3;
b) Problems on teeth and bones:
- Prognathism;
- Retrognathism;
- Overbite;
- Openbite;
- Crowded teeth (lack of spaces);
- Anterior crossbite;
- Posterior crossbite;
- Diastema;
Warnings:
2
- Non reusable product, as its reuse may cause cross infection, loss of mechanical properties
and degradation of the aesthetic coverage.
- Do not use the product if the packaging is violated.
- Non-sterile product.
- Product to be applied by orthodontic qualified professional only.
- This product contains Nickel. A small percentage of the population is allergic to these metal.
In case of allergic reactions, advise the patient to seek medical attention.
1
Use Instructions
- The Archwire's safety hasn’t been tested in Magnetic Resonance environment, the patient
should be advised about this condition.
- The archwire heating can sensitize the structure of the material, reducing its mechanical
properties, leading the same to fracture.
- The archwire heating can cause deterioration of its aesthetic coverage.
- Submit the Archwire to alternate cyclic stresses can induce it to fracture.
- In order to avoid damaging the aesthetic coverage, replace the Intraoral Archwire within 30
days.
- In order to preserve the aesthetic coverage, the handling of the archwire with pliers or
tweezers should be avoided, and the use of accessories, such as hooks and stops, must be
done with caution.
- Regularly exposure to substances with fluoride can cause the weakening of the Archwire.
- Regularly exposure to substances with alcohol can decrease the aesthetic coverage
resistance.
DESCRIPTION
CODE
50.60.035
Intraoral Aesthetic Archwire Superelastic Large - NiTi Round Ø0,30mm (.012")
50.60.036
Intraoral Aesthetic Archwire Superelastic Large - NiTi Round Ø0,35mm (.014")
50.60.037
Intraoral Aesthetic Archwire Superelastic Large - NiTi Round Ø0.40mm (.016")
50.60.038
Intraoral Aesthetic Archwire Superelastic Large - NiTi Round Ø0.45mm (.018")
50.62.036
Intraoral Aesthetic Archwire Superelastic Large - NiTi Rectangular 0,43X0,63mm (.017"X.025")
50.62.037
Intraoral Aesthetic Archwire Superelastic Large - NiTi Rectangular 0,48X0,63mm (.019"X.025")
50.70.035
Intraoral Aesthetic Archwire Superelastic Medium - NiTi Round Ø0,30mm (.012")
50.70.036
Intraoral Aesthetic Archwire Superelastic Medium - NiTi Round Ø0,35mm (.014")
50.70.037
Intraoral Aesthetic Archwire Superelastic Medium - NiTi Round Ø0,40mm (.016")
50.70.038
Intraoral Aesthetic Archwire Superelastic Medium - NiTi Round Ø0,45mm (.018")
50.72.036
Intraoral Aesthetic Archwire Superelastic Medium - NiTi Rectangular 0,43X0,63mm
50.72.037
Intraoral Aesthetic Archwire Superelastic Medium - NiTi Rectangular 0,48X0,63mm
Archwire Composition(% in weight):
Ni = 55,4 to 57% / Ti = Bal.
Coverage Composition:
Low cure thermofix urethane copolymer resin (Polyurethane)
Validity:
10 years
Manufactured by:
Dental Morelli Ltda.
Alameda Jundiaí, 230/250 – Jardim Saira
ZIP Code: 18085-090 Sorocaba – SP – Brazil
Tel.: (55) 15-3238 8200 / 0800 7031455
Technical Responsible: Roger Morelli
CREA-SP 5060214985
Use Instructions nº 01.09.506 - Revision 0
MS/ANVISA Registration: 10396830052
Technical Name: Wire for Orthodontics
Commercial Name of the Product Family:
Aesthetic Superelastic Intraoral Orthodontic Archwire
2