Double End Tenoner

IST Series
Double End Tenoner
●90% Market Share in the Flooring Field in Japan
●Choice of Many of Models & Mechanisms
●Many Kinds of Various Caterpillar Chains
●Beveling and Slope Processing by Inclined Spindles
●Excellent Durability
●Body Cover(Optional)
Your Nearest Agent
Yasuda Corporation
413 Kamishinkiri Ichinomiya-Cho Toyokawa City
Aichi Prefecture Japan
441-1231
Tel : +81-533-93-3500
Fax : +81-533-93-6277
Email : [email protected]
HP : http://www.yasuda-corporation.com
DET for Length Cutting
IST2C02B/N30B-DR10S
※Body Cover（Optional）
DET for Cross Cutting
IST2C08N75B-DV12S
※Body Cover（Optional）
Double End Tenoner
IST Series
This machine processes tenon on both sides of materials with feeding materials on the caterpillar chain.
It also processes various profiles, such as sizing, beveling, shiplapping with high accuracy and efficiency.
Moreover, our DET has excellent productivity and durability. Continuous operation for 24 hours is possible.
Many customers use our DET for over 30 years with proper maintenance. Durability is one of our DET’s
strong points.
Our DET has a 90% market share in the flooring field in Japan.
As to specifications, our products are made to order. Specifications would be determined by needs.
Functions
Various Main Spindles
Various spindles specialized for hogging, molding and
grooving.
It’s possible to achieve high accuracy in cutting by
positioning the materials & caterpillar chain closest to the
cutting surface.
Caterpillar Chain
There are four different kinds of caterpillar chains,
75mm, 35mm, 30mm, 25mm. You can choose the width
appropriate to materials’ width.
This is unique to our company not available from our
competitors. It achieves to process with high accuracy.
Hold Down Unit
Air Cushion Style keeps the maximum pressing and
pushing allowance without deviation. You can choose
from rollers or pressure belts which depends on materials.
This is an example below.
Roller Type
It’s often used by DET for length cutting.
Belt Type
It’s often used by DET for cross cutting.
Inclined Spindles
Direct drive spindles can change angles.
In addition to beveling, it processes many different
angles.
You can change angles easily with an inclined scale.
Main Spindle Motors
You can choose a high frequency motor of direct drive
type or belt drive type.
As to a high frequency motor of direct drive type, you can
easily change revolution speed by an inverter.
（An inverter is an option）
The belt drive type’s speed is set by the pulley ratio.
Dog Feed
As to cross cutting, it will be dog feeding on the long side
basis.
Each material is fed with two dogs on both sides of the
caterpillar chain, so that the machine enables to be right
angle processing with high accuracy.
※You can watch a movie about DET on our web site.
Specifications
Double End Tenoner for Length Cutting
Model
Working
Dimensions
Spindles
IST2C02B/N30B-DR10S
Width
75 ～ 310 mm
Thickness
8 ～ 25 mm
Circular Saw
5.5kW × 2P
4 units
Beveling
5.5kW × 2P
2 units
Miling
5.5kW × 2P
2 units
Inclined
5.5kW × 2P
2 units
Feed Rate
30 ～ 90 m/min
Feeding Motor
5.5kW × 4P
Column Traveling Motor
0.75kW × 4P
Required Air Volume
0.5MPa 100 ℓ/min (ANR)
Power Supply
3 Phases AC200V 60/50Hz
Double End Tenoner for Cross Cutting
Model
Working
Dimensions
Spindles
IST2C08B/N75B-DV12S
Width
600 ～ 2450 mm
Thickness
8 ～ 25 mm
Jumping
3.7kW × 2P
2 units
Circular Saw
5.5kW × 2P
4 units
Horizontal
5.5kW × 2P
2 units
Miling
5.5kW × 2P
2 units
Inclined
5.5kW × 2P
2 units
Feed Rate
8 ～ 40 m/min
Feeding Motor
7.5kW × 4P
Column Traveling Motor
0.75kW × 4P
Required Air Volume
0.5MPa 100 ℓ/min (ANR)
Power Supply
3 Phases AC200V 60/50Hz
※ The above specifications are an example. Specifications would be determined by
customization.