ball valves

Transcription

ball valves

GENERAL CATALOGUE
BALL VALVES
INDEX
1.
1.
2.
2.
2.
3.
4.
10.
11.
15.
18.
19.
22.
22.
24.
53.
62.
USE
DADO® BALL VALVE
STANDARD PORT
OR FULL PORT
HEAVY TYPE SERIES
W SERIES
CERTIFICATIONS
R250D AND R250W STANDARD
PORT BALL VALVES
R285 BALL VALVES
WITH PUMP CONNECTION
R850 AND R580V BALL VALVE WITH FULL PORT
R910 DADO® BALL VALVES WITH FULL PORT
R950 AND R950W ARE FULL PORT DADO®
BALL VALVES, HEAVY TIPE
R780 ANGLE BALL VALVES
BALL VALVES WITH SPEED REDUCTION
BALL VALVES FOR METERS
TECHNICAL DATA
HEAD LOSSES
FITTINGS
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
USE
Giacomini ball valves were designed for high mechanical resistance, minimising the overall size, and to guarantee proper
operation even with very high operating pressures. Materials used are appropriate for the application, in full safety conditions,
on hot and cold water systems, food use fluids, gas, hydrocarbons, compressed air and dry saturated steam. The assembly
of the stem from inside, tampering-proof, is appropriate for use in internal and external gas distribution networks.
This large array provides the solution to all needs!
DADO® ball valve
Traditional ball valves maintain the typical characteristics of the Giacomini production, which since the ’50s guarantees
quality and continuous improvement of materials and production processes, the result of decades of experience.
DADO® ball valve, instead, is an exclusive Giacomini model, which represented a revolution in the world of ball valves.
Their “cubic” shape guarantees the removal of impurities from tightness seats, eliminating the possibility of damaging the
gaskets, during the opening and closing operations; the impurities contained in the flow, in fact, deposit on the flat face of
the ball and then are eliminated by fluid stream.
The reduced contact between the ball and the tightness seats reduces friction between the parts and consequently the
manoeuvre torque of the valve is lower by around 15%-20% with respect to the one required by a traditional ball. The
combined effect of these factors determines an extension of useful life of PTFE gaskets.
Traditional balls are assembled on the valves of families R250D, R850, R780, whereas DADO® balls are assembled
on the valves of families R910 and R950.
1
Standard port or Full port
Ball valves with standard port feature a free
DN PIPE
DN STANDARD PORT
DN FUll PORT
section for the port not lower than 75%
8
8
8
of the one of the pipe on which they are
10
10
10
assembled.
15
14
15
Ball valves with full port, instead, guarantee
20
18
20
a free section for the port corresponding to
25
22
25
the one of the pipe.
32
28
32
40
35
40
The valves of the family R250D have a
50
45
50
standard port, whereas the valves of
65
58
65
families R780, R850, R910 and R950 have
75
68
75
an full port.
100
90
100
Heavy type series
The Heavy-type series includes ball valves of the family R950 and R951. Heavy type, guaranteed by wall thicknesses
higher than all other Giacomini ball valves.
W Series
Ball valves of the W Series, conforming with European standard EN 13828, represent the care of Giacomini for the sector
of transportation of drinking water for households. The valves of families R250W, R910W and with speed reducer, in
fact, are certified by the DVGW German institute; characterized by strict criteria of design and production, on the bottom
of the ball they have an additional hole, crucial to guarantee the constant change of water that, during the manoeuvre
operations, inevitably deposits in the space between valve and valve Body. This constant water change is crucial to prevent
the development of bacterial colonies (typical event for stagnant waters). Ball valves of the W Series typically have the green
control device.
2
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Certifications
Giacomini ball valves are among the most certified in the world, the safest and more resistant.
Below the table shows the symbols used in this catalogue.
CERTIFICATION
1115
DESCRIPTION
COUNTRY
CSA International - Canadian Standard Association
Canada
Certification according to Ukrainian standards (Derzhstandard)
Ukraine
Certificate of conformity with standards Gost-R
(Gosudarstvennyj Standart)
Russia
UL Underwriters Laboratories
USA
FM Approval - Factory Mutual
USA
Attestation de conformitè sanitaire
France
Certification according to Byelorussian standards
Byelorussia
EMI Épitésügyi Mimöségellenörzo Innovéciós
Hungary
WRAS Water Regulations Advisory Scheme
UK
DVGW Deutsche des Gas-und Wasserfaches
Vereinigung
and.v. Germania
Advantica
UK
SVGW Schweizerische Verein des Gas-und Wasserfaches
Switzerland
Marque NF RoB-GAZ certigaz
France
OVGW Österreichischen Vereinigung für das Gas-und Wasserfaches
Austria
CE Marking in compliance with PED
European
Community
NSF International
USA
DS Certificering A/S ETA - Danmark
Danimarck
3
R250D AND R250W - STANDARD PORT BAll VAlVES
Ball valves R250D and R250W propose a large array of types of connections, with many control devices, with or without
drain tap or sensor-holder. These valves have traditional balls with standard port installed.
R250D
CERTIFICATIONS
Chrome plated ball valve,
female connections and
lever handle.
Standard port.
RED LEVER HANDLE
*1115 according to “PED” 97/23/CE directive
YELLOW LEVER HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R250X001
1/4”
R250X021
1/4”
R250X002
3/8”
R250X022
3/8”
R250X003
1/2”
R250X023
1/2”
R250X004
3/4”
R250X024
3/4”
R250X005
1”
R250X025
1”
R250X006*
1”1/4
R250X026*
1”1/4
1”1/2
R250X007*
1”1/2
R250X027*
R250X008*
2”
R250X028*
2”
R250X009*
2”1/2
R250X029*
2”1/2
R250X010*
3”
R250X030*
3”
R250X011*
4”
R250X031*
4”
PART NUMBER
SIZE
R250WX022
3/8”
R250WX023
1/2”
R250WX024
3/4”
R250W
CERTIFICATIONS
green lever handle.
Standard port.
W Series.
R250WX025
1”
R250WX026
1”1/4
R250WX027
1”1/2
R250WX028
2”
R250DS
CERTIFICATIONS
female connections, red
lever handle and drain tap.
Standard port.
1/2”-3/4”-1”: 1/4” drain tap
1”1/4-1”1/2-2”: 3/8”drain tap.
4
PART NUMBER
SIZE
R250SX003
1/2”
R250SX004
3/4”
R250SX005
1”
R250SX006
1”1/4
R250SX007
1”1/2
R250SX008
2”
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R250WS
CERTIFICATIONS
Crome plated ball valve,
female attacks, green lever
handle and with drain cock.
Standard port.
1/2”-3/4” -1”: drain cock 1/4”.
1”1/4-1”1/2-2 drain cock 3/8”.
PART NUMBER
SIZE
R250SX143
1/2”
R250SX144
3/4”
R250SX145
1”
R250SX146
1”1/4
R250SX147
1”1/2
R250SX148
2”
R251D
CERTIFICATIONS
female connections and T
handle.
Standard port.
RED T HANDLE
*1115 According to “PED” 97/23/CE directive
YELLOW T HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R251X001
1/4”
R251X021
1/4”
R251X002
3/8”
R251X022
3/8”
R251X003
1/2”
R251X023
1/2”
R251X004
3/4”
R251X024
3/4”
R251X005
1”
R251X025
1”
R251X006*
1”1/4
R251X026*
1”1/4
PART NUMBER
SIZE
R251WX022
3/8”
R251WX023
1/2”
R251WX024
3/4”
R251W
CERTIFICATIONS
green T handle.
Standard port.
W Series.
R251WX025
1”
R251WX026
1”1/4
PART NUMBER
SIZE
R251SX003
1/2”
R251SX004
3/4”
R251SX005
1”
R251S
CERTIFICATIONS
female connections,
red T handle
and 1/4” drain tap.
Standard port.
5
R251T
CERTIFICATIONS
Standard port ball valve,
with sensor
connection M10 female
connection.
BRASS FINISHED
CHROME PLATED
PART NUMBER
SIZE
PART NUMBER
SIZE
R251TX004
3/4”
R251TY004
3/4”
R251TX005
1”
R251TY005
1”
PART NUMBER
SIZE
R251X052
3/8”
R251X053
1/2”
R251X054
3/4”
R251TH
CERTIFICATIONS
female connections,
with extended plastic T
handle for pipes with high
insulating thickness.
Standard port.
R251X055
1”
R251X056*
1”1/4
R251X057*
1”1/2
R251X058*
2”
*1115 according to “PED” 97/23/CE directive
R253D
CERTIFICATIONS
male connections and T
handle.
Standard port.
RED T HANDLE
YELLOW T HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R253X002
3/8”
R253X022
3/8”
R253X003
1/2”
R253X023
1/2”
R253X004
3/4”
R253X024
3/4”
R253X005
1”
R253X025
1”
R253X006*
1”1/4
R253X026*
1”1/4
PART NUMBER
SIZE
R253WX002
3/8”
R253WX003
1/2”
R253WX004
3/4”
R253W
CERTIFICATIONS
male connections and green
T handle.
Standard port.
W Series.
6
R253WX005
1”
R253WX006
1”1/4
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R253DL
CERTIFICATIONS
Male x male standard port
ball valve,
red or yellow lever handle,
chrome plated.
RED T HANDLE
YELLOW T HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R253lX002
3/8”
R253lX022
3/8”
R253lX003
1/2”
R253lX023
1/2”
R253lX004
3/4”
R253lX024
3/4”
R253lX005
1”
R253lX025
1”
R253lX006*
1”1/4
R253lX026*
1”1/4
R253WL
CERTIFICATIONS
male connections and green
lever handle. Standard port.
W Series.
PART NUMBER
SIZE
R253WX032
3/8”
R253WX033
1/2”
R253WX034
3/4”
R253WX035
1”
R253WX036
1”1/4
R254D
CERTIFICATIONS
female-male connections
and T handle.
Standard port.
RED T HANDLE
YELLOW T HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R254X001
1/4”
R254X021
1/4”
R254X002
3/8”
R254X022
3/8”
R254X003
1/2”
R254X023
1/2”
R254X004
3/4”
R254X024
3/4”
R254X005
1”
R254X025
1”
R254X006*
1”1/4
R254X026*
1”1/4
R254W
CERTIFICATIONS
and green T handle.
Standard port.
W Series.
PART NUMBER
SIZE
R254WX022
3/8”
R254WX023
1/2”
R254WX024
3/4”
R254WX025
1”
R254WX026
1”1/4
7
R254DL
CERTIFICATIONS
and lever handle.
Standard port.
RED LEVER HANDLE
YELLOW LEVER HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R254lX001
1/4”
R254lX021
1/4”
R254lX002
3/8”
R254lX022
3/8”
R254lX003
1/2”
R254lX023
1/2”
R254lX004
3/4”
R254lX024
3/4”
R254lX005
1”
R254lX025
1”
R254lX006*
1”1/4
R254lX026*
1”1/4
R254lX007*
1”1/2
R254lX027*
1”1/2
R254lX008*
2”
R254lX028*
2”
R254WL
CERTIFICATIONS
and green lever handle.
Standard port.
W Series.
PART NUMBER
SIZE
R254WX052
3/8”
R254WX053
1/2”
R254WX054
3/4”
R254WX055
1”
R254WX056
1”1/4
PART NUMBER
SIZE
R258CX002
ø15
R258CX005
ø22
R258CX006
ø28
R258CC
CERTIFICATIONS
press-fittings and
red lever handle.
Standard port.
R258D
CERTIFICATIONS
Brass-finished ball valve,
with solder connections and
red lever or T handle.
Standard port.
RED T HANDLE
8
RED LEVER HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R258Y012
ø15
R258Y002
ø15
R258Y014
ø18
R258Y004
ø18
R258Y015
ø22
R258Y005
ø22
R258Y016
ø28
R258Y006
ø28
R258Y017*
ø35
R258Y007*
ø35
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R259D
CERTIFICATIONS
Ball valve, female-male
connections with pipe union
and red T handle.
Standard port.
CHROME PLATED
a
b
BRASS FINISHED
PART NUMBER
SIZE
axb
PART NUMBER
SIZE
axb
R259X003
1/2”x1/2”
R259Y003
1/2”x1/2”
R259X004
1/2”x3/4”
R259X005
3/4”x3/4”
R259X005
3/4”x3/4”
R259X006
3/4”x1”
R259X006
3/4”x1”
R259X007
1”x1”
R259X007
1”x1”
R259X008
1”x1”1/4
R259X008
1”x1”1/4
R259X009
1”1/4x1”1/4
R259X009
1”1/4x1”1/4
PART NUMBER
SIZE
axb
R259WX023
1/2”x1/2”
R259WX024
1/2”x3/4”
R259WX025
3/4”x3/4”
R259WX026
3/4”x1”
R259W
CERTIFICATIONS
with pipe union and green
T handle. Standard port.
W Series.
b
a
R259WX027
1”x1”
R259WX028
1”x1”1/4
R259WX029
1”1/4x1”1/4
R259DC
CERTIFICATIONS
Ball valve, female-male
connections with solder
pipe union and red T
handle. Standard port.
CHROME PLATED
a
b
BRASS FINISHED
PART NUMBER
SIZE
axb
PART NUMBER
SIZE
axb
R259CX003
1/2”x15
R259CY003
1/2”x15
R259CX005
3/4”x22
R259CY005
3/4”x22
R259CX007
1”x28
R259CY007
1”x28
PART NUMBER
SIZE
axb
R259SX003
1/2”x1/2”
R259SX004
1/2”x3/4”
R259SX005
3/4”x3/4”
R259SX006
3/4”x1”
R259DS
CERTIFICATIONS
with pipe union, red T
handle and drain tap.
Standard port.
a
1/4” drain tap except R259SX009
with 3/8”drain tap
R259SX007
1”x1”
R259SX008
1”x1”1/4
R259SX009
1”1/4x1”1/4
b
9
R259T
CERTIFICATIONS
Standard port ball valve,
brass finish with tail piece
and sensor connection M10,
female connection, red T
handle.
a
PART NUMBER
SIZE
axb
R259TY005
3/4”x3/4”
R259TY006
3/4”x1”
R259TY007
1”x1”
M10 female sensor-holder
connection.
b
R285 BAll VAlVES WITH PUMP CONNECTION
Ball valves R285 have a kind of shaping of the flange that allows inserting them in the caps connecting them to the pump,
in addition they have an extended stem that allows the adjustment organs (lever or T handle) to operate without interfering
and damaging the thickness of the insulation. Traditional standard port balls are installed on these valves.
R285
CERTIFICATIONS
flat base connection for
pump connection and red T
handle raised for insulation.
Standard port.
PART NUMBER
SIZE
axb
R285Y001
1”x1”1/2
R285Y002
1”1/4x1”1/2
R285Y003
1”1/4x2”
PART NUMBER
SIZE
axb
b
a
R285L
CERTIFICATIONS
Brass-finished ball valve, flat
base connection for pump
connection and red lever
handle raised for insulation.
Standard port.
b
a
10
R285lY001
1”x1”1/2
R285lY002
1”1/4x1”1/2
R285lY003
1”1/4x2”
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R850 AND R580V BAll VAlVE WITH FUll PORT
R850 is a valve with full port traditional ball. It can be found in a wide range of connection types and with many control
devices.
R850
CERTIFICATIONS
lever handle.
Full port.
RED LEVER HANDLE
YELLOW LEVER HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R850X021
1/4”
R850X001
1/4”
R850X022
3/8”
R850X002
3/8”
R850X023
1/2”
R850X003
1/2”
R850X024
3/4”
R850X004
3/4”
R850X025
1”
R850X005
1”
R850X026*
1”1/4
R850X006*
1”1/4
R850X027*
1”1/2
R850X007*
1”1/2
R850X028*
2”
R850X008*
2”
R851
CERTIFICATIONS
female connections and T
handle.
Full port.
RED T HANDLE
YELLOW T HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R851X021
1/4”
R851X001
1/4”
R851X022
3/8”
R851X002
3/8”
R851X023
1/2”
R851X003
1/2”
R851X024
3/4”
R851X004
3/4”
R851X025
1”
R851X005
1”
R851X026*
1”1/4
R851X006*
1”1/4
PART NUMBER
SIZE
R851TX002
3/8”
R851TX003
1/2”
R851TX004
3/4”
R851TH
CERTIFICATIONS
female connections,
insulation thickness.
Full port.
R851TX005
1”
R851TX006*
1”1/4
R851TX007*
1”1/2
R851TX008*
2”
11
R850V
CERTIFICATIONS
press-fittings with yellow
O-ring according to
standards EN549 and EN682
for gas and hydrocarbon
fluids distribution plants
and yellow lever handle.
Full port.
PART NUMBER
SIZE
R850VY103
ø15
R850VY104
ø22
R850VY105
ø28
R850VY106*
ø35
R850VY107*
ø42
R850VY108*
ø54
PART NUMBER
SIZE
R850VY137
ø42
R850VY138
ø54
PART NUMBER
SIZE
R851VY103
ø15
R851VY104
ø22
R851VY105
ø28
R851VY106
ø35
R850VW
CERTIFICATIONS
press-fittings with black
O-ring according to
standard EN681-1 for water
distribution plants (drinking
and heating water) and
green lever handle.
Full port.
W Series.
R851VT
CERTIFICATIONS
press-fittings with black
O-ring according to
standard EN681-1 for water
distribution plants (drinking
and heating water) and
insulating thickness.
Full port.
W Series.
12
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R850VWS
CERTIFICATIONS
Brass finish ball valve, female
press-connections with black
o-ring in compliance with
EN681-1 for (potable and
heating) water distribution
systems, green lever handle
and drain cock.
Full port. W series.
PART NUMBER
SIZE
R850VY157
ø 42x1”1/2
R850VY158
ø 54X2”
PART NUMBER
SIZE
R851VY152
ø 18x1/2”
R851VY153
ø 15x1/2”
R851VY154
ø 22x3/4”
3/8” drain cock.
R851VTS
CERTIFICATIONS
Brass finish ball valve, female
systems and plastic extended
T handle for pipes having
high insulating thickness.
R851VY155
ø 28x1”
R851VY156
ø 35x1”1/4
PART NUMBER
SIZE
R853VY102
ø 18x1/2”
R853VY103
ø 15x1/2”
R853VY104
ø 22x3/4”
1/2”-3/4”-1”: drain cock size 1/4”
1”1/4-1”1/2-2”: drain cock size 3/8”
R853VT
CERTIFICATIONS
Brass finish ball valve, male
systems and plastic extended
T handle for pipes having
high insulating thickness.
R853VY105
ø 28x1”
R853VY106
ø 35x1”1/4
13
R853VWL
CERTIFICATIONS
systems and green lever
handle Full port. W series.
PART NUMBER
SIZE
R853VY137
ø 42x1”1/2
R853VY138
ø 54X2”
PART NUMBER
SIZE
R854VY102
ø 18x1/2”
R854VY103
ø 15x1/2”
R854VY104
ø 22x3/4”
R854VT
CERTIFICATIONS
– Brass finish ball valve,
female press-connections
with black o-ring in
compliance with EN681-1 for
(potable and heating) water
distribution systems and
plastic extended T handle for
pipes having high insulating
thickness. Full port. W series.
R854VY105
ø 28x1”
R854VY106
ø 35x1”1/4
PART NUMBER
SIZE
R854VY137
ø 42x1”1/2”
R854VY138
ø 54x2”
PART NUMBER
SIZE
R859VY102
ø 18x1/2”
R859VY103
ø 15x1/2”
R859VY104
ø 22x3/4”
R854VWL
CERTIFICATIONS
Brass finish ball valve,
female press-connections
with black o-ring in
compliance with EN681-1
for (potable and heating)
water distribution systems
and green lever handle Full
port. W series.
R859VT
CERTIFICATIONS
press-connections with tail
piece, having black o-ring in
compliance with EN681-1 for
(potable and heating) water
distribution systems and
plastic extended T handle for
pipes having high insulating
thickness. Full port. W series
14
R859VY105
ø 28x1”
R859VY106
ø 35x1”1/4
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R910 DADO® BAll VAlVES WITH FUll PORT
Ball valves R910 and R910W propose a large array of types of connections, with lever or T handle control devices with or
without drain tap. These valves have DADO® balls with full port installed.
R910
CERTIFICATIONS
DADO® ball valve,
nickel plated, female
connections and lever
handle. Full port.
RED LEVER HANDLE
YELLOW LEVER HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R910X022
3/8”
R910X002
3/8”
R910X023
1/2”
R910X003
1/2”
R910X024
3/4”
R910X004
3/4”
R910X025
1”
R910X005
1”
R910X026*
1”1/4
R910X006*
1”1/4
1”1/2
R910X027*
1”1/2
R910X007*
R910X028*
2”
R910X008*
2”
R910X029*
2”1/2
R910X009*
2”1/2
R910X030*
3”
R910X010*
3”
R910X031*
4”
R910X011*
4”
PART NUMBER
SIZE
R910SX003
1/2”
R910SX004
3/4”
R910S
CERTIFICATIONS
DADO® ball valve,
connections, red lever
handle and drain tap.
Full port.
1/2”-3/4”-1”: 1/4” drain tap
1”1/4-1”1/2-2”: 3/8”.drain tap
R910SX005
1”
R910SX006
1”1/4
R910SX007
1”1/2
R910SX008
2”
R911
CERTIFICATIONS
DADO® ball valve,
connections and T handle.
Full port.
RED T HANDLE
YELLOW T HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R911X022
3/8”
R911X002
3/8”
R911X023
1/2”
R911X003
1/2”
R911X024
3/4”
R911X004
3/4”
R911X025
1”
R911X005
1”
R911X026*
1”1/4
R911X006*
1”1/4
15
R913
CERTIFICATIONS
DADO® ball valve,
nickel plated, male
connections and red T
handle.
Full port.
PART NUMBER
SIZE
R913X022
3/8”
R913X023
1/2”
R913X024
3/4”
R913X025
1”
R913X026*
1”1/4
PART NUMBER
SIZE
R913lX022
3/8”
R913lX023
1/2”
R913lX024
3/4”
R913L
CERTIFICATIONS
DADO® ball valve,
nickel plated, male
connections and red lever
handle.
Full port.
R913lX025
1”
R913lX026*
1”1/4
R914
CERTIFICATIONS
DADO® ball valve, nickel
plated, female-male
Full port.
RED T HANDLE
16
YELLOW T HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R914X021
1/4”
R914X001
1/4”
R914X022
3/8”
R914X002
3/8”
R914X023
1/2”
R914X003
1/2”
R914X024
3/4”
R914X004
3/4”
R914X025
1”
R914X005
1”
R914X026*
1”1/4
R914X006*
1”1/4
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R914L
CERTIFICATIONS
DADO® ball valve,
nickel plated, female-male
handle .
Full port.
RED LEVER HANDLE
YELLOW LEVER HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R914lX021
1/4”
R914lX001
1/4”
R914lX022
3/8”
R914lX002
3/8”
R914lX023
1/2”
R914lX003
1/2”
R914lX024
3/4”
R914lX004
3/4”
R914lX025
1”
R914lX005
1”
R914lX026*
1”1/4
R914lX006*
1”1/4
R914lX027*
1”1/2
R914lX007*
1”1/2
R914lX028*
2”
R914lX008*
2”
PART NUMBER
SIZE
R918Y003
15
R918Y004
22
R918Y005
28
R918Y006*
35
R918
CERTIFICATIONS
DADO® ball valve,
handle .
Full port.
R919
CERTIFICATIONS
DADO® ball valve,
and red T handle.
Full port.
a
PART NUMBER
SIZE
axb
R919X003
1/2”x1/2”
R919X004
1/2”x3/4”
R919X005
3/4”x3/4”
R919X006
3/4”x1”
R919X007
1”x1”
R919X008
1”x1”1/4
R919X009
1”1/4x1”1/4
PART NUMBER
SIZE
axb
R919SX003
1/2”x1/2”
R919SX004
1/2”x3/4”
R919SX005
3/4”x3/4”
R919SX006
3/4”x1”
b
R919S
CERTIFICATIONS
DADO® ball valve,
connections with pipe
union, red T handle and
drain tap. Full port.
a
1/4” Drain tap except R919SX009
with 3/8”drain tap
R919SX007
1”x1”
R919SX008
1”x1”1/4
R919SX009
1”1/4x1”1/4
b
17
R950 AND R950W ARE FUll PORT DADO® BAll VAlVES, HEAVY TIPE
R950 is a DADO® ball valve with Full port. Heavy type. Available in the version with female connections and lever or T
handle.
R950
CERTIFICATIONS
DADO® ball valve, nickel
plated, female connections
and lever handle.
Full port.
Heavy-type series.
Certified in compliance with
the European Standard
EN 331: 1998 by DVGW,
CERTIgaz and ADVANTICA
RED LEVER HANDLE
YELLOW LEVER HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R950X021
1/4”
R950X001
1/4”
R950X022
3/8”
R950X002
3/8”
R950X023
1/2”
R950X003
1/2”
R950X024
3/4”
R950X004
3/4”
R950X025
1”
R950X005
1”
R950X026*
1”1/4
R950X006*
1”1/4
R950X027*
1”1/2
R950X007*
1”1/2
R950X028*
2”
R950X008*
2”
R950W
CERTIFICATIONS
Full port ball valve, compact
pattern, green lever handle
nickel plated with reduce
percentage of lead.
Suitable for potable water.
PART NUMBER
SIZE
R950WX002
3/8”
R950WX003
1/2”
R950WX004
3/4”
R950WX005
1”
R950WX006
1”1/4
R950WX007
1”1/2
R950WX008
2”
R951
CERTIFICATIONS
DADO® ball valve,
Full port.
Heavy-type series.
18
RED T HANDLE
YELLOW T HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
R951X021
1/4”
R951X001
1/4”
R951X022
3/8”
R951X002
3/8”
R951X023
1/2”
R951X003
1/2”
R951X024
3/4”
R951X004
3/4”
R951X025
1”
R951X005
1”
R951X026*
1”1/4
R951X006*
1”1/4
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R951W
CERTIFICATIONS
Full port ball valve, compact
pattern, green T handle
nickel plated with reduce
percentage of lead. Suitable
for potable water.
PART NUMBER
SIZE
R951WX002
3/8”
R951WX003
1/2”
R951WX004
3/4”
R951WX005
1”
R951WX006
1”1/4
R780 ANGlE BAll VAlVES
R780 angle ball valves can be used mainly in the applications in which a connection is required with wall-mounted
connections. A large array of types of connections is offered, with lever or T handle control devices and with full port
traditional ball.
R780
CERTIFICATIONS
Angle ball valve,
chrome plated, male-female
connection, flat base and
yellow T handle.
Full port.
PART NUMBER
SIZE
R780X003
1/2”
R780X004
3/4”
R780X005
1”
R780L
CERTIFICATIONS
Angle ball valve,
chrome plated, male-female
connections, flat base and
yellow lever handle.
Full port.
PART NUMBER
SIZE
R780lX003
1/2”
R780lX004
3/4”
R780lX005
1”
19
R781
CERTIFICATIONS
Angle ball valve,
chrome plated, female-male
yellow T handle.
Full port.
PART NUMBER
SIZE
R781X003
1/2”
R781X004
3/4”
R781X005
1”
R781L
CERTIFICATIONS
Angle ball valve, chrome
plated, female-male
Full port.
PART NUMBER
SIZE
R781lX003
1/2”
R781lX004
3/4”
R781lX005
1”
PART NUMBER
SIZE
R782X003
1/2”
R782X004
3/4”
R782X005
1”
PART NUMBER
SIZE
R782lX003
1/2”
R782lX004
3/4”
R782lX005
1”
R782
CERTIFICATIONS
Angle ball valve,
chrome plated, male-male
connections flat base and
yellow T handle.
Full port.
R782L
CERTIFICATIONS
Angle ball valve,
chrome plated, male-male
Full port.
20
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R783
CERTIFICATIONS
Angle ball valve,
chrome plated, femalefemale connections and
yellow T handle.
Full port.
PART NUMBER
SIZE
R783X003
1/2”
R783X004
3/4”
R783X005
1”
R783L
CERTIFICATIONS
Angle ball valve, chrome
plated, female-male
and red T handle.
Full port
PART NUMBER
SIZE
R783lX003
1/2”
R783lX004
3/4”
R783lX005
1”
PART NUMBER
SIZE
R789X003
1/2”x1/2”
R789X005
3/4”x3/4”
R789X007
1”x1”
R789
CERTIFICATIONS
Angle ball valve,
chrome plated, female-male
and red T handle.
Full port.
21
BAll VAlVES WITH SPEED REDUCTION
Ball valves with speed reducer are equipped with a specific control device that allows multiplying three-fold the closing
time of the ball and consequently removing the water hammer in the water distribution networks. These valves have
traditional standard port balls, with a small hole on the bottom. These are W Series valves, that is DVGW certified
according to the EN13828 standard.
R289S
CERTIFICATIONS
with pipe union and slowed
down operation and 1/4”
drain tap.
Standard port.
W Series.
PART NUMBER
SIZE
R289SX024
3/4”
BAll VAlVES FOR METERS
Ball valves for meters are used to shut off the port of fluids in the installations of flow rate measuring devices, water
meters, hydrocarbon meters and heat meters. These valves have a fixed cap equipped with small circumferential holes for
the connection of any type of meter with flat seat connections with the possibility of seals and lead-sealing.
R251P
CERTIFICATIONS
Ball valve for meters,
female-female connections,
with fixed cap and red T
a
b
22
CHROME PLATED
BRASS FINISHED
PART NUMBER
SIZE
axb
PART NUMBER
SIZE
axb
R251PX003
1/2”x3/4”
R251PY003
1/2”x3/4”
R251PX004
3/4”x3/4”
R251PY004
3/4”x3/4”
R251PX005
3/4”x1”
R251PY005
3/4”x1”
R251PX006
1”x1”
R251PY006
1”x1”
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R251WP
CERTIFICATIONS
female-female connections,
with fixed cap and green T
W Series.
a
b
CHROME PLATED
BRASS FINISHED
PART NUMBER
SIZE
axb
PART NUMBER
SIZE
axb
R251WX073
1/2”x3/4”
R251WY073
1/2”x3/4”
R251WX074
3/4”x3/4”
R251WY074
3/4”x3/4”
R251WX075
3/4”x1”
R251WY075
3/4”x1”
R251WX076
1”x1”
R251WY076
1”x1”
R254P
CERTIFICATIONS
male-female connections
with fixed cap and red T
*
CHROME PLATED
a
b
BRASS FINISHED
PART NUMBER
SIZE
axb
PART NUMBER
SIZE
axb
R254PX004
3/4”x3/4”
R254PY003*
1/2”x3/4”
R254PY004*
3/4”x3/4”
R752
CERTIFICATIONS
a
for meters, female-female
connections with telescopic
pipe union and fixed cap,
and red T handle.
Standard port.
NUMBER
* PART
valid approval
SIZE
axb
R752X003
1/2”x3/4”
R752X005
3/4”x1”
b
R790
Full port ball valve, straight,
post-counter with pressure
outlet.
To be completed with the
joint kit having threaded
male connection R795FY004
(3/4”) and R795FY005 (1”) or
press connection for copper
pipe R795VY004 (3/4”) and
R795VY005 (1”)
R795F
R795V
PART NUMBER
SIZE
R790Y004
3/4”
R790Y005
1”
R795F
SIZE
R795FY004
3/4”
R795FY005
1”
R795V
SIZE
R795VY004
22
R795VY005
28
23
TECHNICAl DATA
Materials
Body:
Sleeve:
Stem:
J
B
C
I
Ball:
Gaskets:
Handle:
Nut:
CW617N - EN 12165 hot-pressed brass, chrome plated
CW614N – EN 12164 bar turned brass, with inner and outer anti-friction
rings and double sealing O-ring
CW617N brass, chrome plated
PTFE with low friction profile
steel lever with plasticized coating
with anti-corrosion coating, guarantee seal and hologram
Field of application
Max. working conditions with dry saturated steam:
185°C at 1,05 MPa (10,5 bar)
Max. working pressure with water and not dangerous gas: 4,2 MPa (42 bar), from 1/4” to 3/4”
3,5 MPa (35 bar), from 1” to 2”
2,8 MPa (28 bar), from 2”1/2 to 4”
Max. operating pressure (MOP) with gas:
0,5 MPa (5bar)
Max. operating working pressure with fluid hydrocarbons: 1,2 MPa (12bar)
H
A
ITEM
SIZE
DN
A
I
B
J
C
H
R250D
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
2”1/2
3”
4”
8
10
14
18
22
28
35
45
58
68
90
39
45
54
62
75
84
93
107
143
160
203
21
22
27
31
38
42
46
54
73
80
104
36
46
48
64
73
82
100
115
154
169
207
10
14
15
18
23
28
33
41
52
60
77
42
77
77
94
94
94
136
136
173
173
187
17
21
25
32
39
48
55
67
82
98
122
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
Max. working conditions with dry saturated steam: 185°C a 1,05 MPa (10,5 bar)
Max. working pressure with water:
4,2 MPa (42 bar), from 3/8” to 3/4”
3,5 MPa (35 bar), from 1” to 2”
24
ITEM
SIZE
DN
A
I
B
J
C
H
R250W
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
10
14
18
22
28
35
45
47
56
68
79
92
100
121
24
28
33
40
46
50
61
46
48
64
73
82
100
115
14
15
18
23
28
33
41
77
77
94
94
94
136
136
21
25
32
39
48
55
67
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
4,2 MPa (42 bar), from 1/2” to 3/4”
3,5 MPa (35 bar), from 1” to 2”
Max. operating working temperature: 120°C
ITEM
SIZE
DN
A
I
B
J
C
H
R250DS
1/2”
3/4”
1”
1”1/4
1”1/2
2”
14
18
22
28
35
45
59
69
81
99
107
121
32
36
43
57
60
67
48
64
73
82
100
115
15
18
23
28
33
41
77
94
94
94
136
136
25
32
39
48
55
67
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
4,2 MPa (42 bar), from 1/2” to 3/4”
3,5 MPa (35 bar), from 1” to 2”
ITEM
SIZE
DN
A
I
B
J
C
H
R250WS
1/2”
3/4”
1”
1”1/4
1”1/2
2”
14
18
22
28
35
45
60
71
83
102
110
128
32
36
43
56
60
67
48
64
73
82
100
115
15
18
23
28
33
41
77
94
94
94
136
136
25
32
39
48
55
67
25
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
CW614N – EN 12164 bar turned brass, with inner and outer
anti-friction rings and double sealing O-ring
painted aluminium T-handle
I
H
185°C at 1,05 MPa (10,5 bar)
3,5 MPa (35 bar), from 1” to 1”1/4
0,5 MPa (5bar)
A
ITEM
SIZE
DN
A
I
B
J
C
H
R251D
R251T
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
8
10
14
18
22
28
39
45
54
62
75
84
21
22
27
31
38
42
36
46
48
64
73
82
10
14
15
18
23
28
42
77
77
94
94
94
17
21
25
32
39
48
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
26
Max. working conditions with dry saturated steam: 185°C a 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 3/8” to 3/4”
3,5 MPa (35 bar), from 1” to 2”
ITEM
SIZE
DN
A
I
B
J
C
H
R251W
3/8”
1/2”
3/4”
1”
1”1/4
10
14
18
22
28
47
56
68
79
92
24
28
33
40
46
46
48
64
73
82
14
15
18
23
28
77
77
94
94
94
21
25
32
39
48
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
Max. working pressure with waters:
4,2 MPa (42 bar), from 1/2” to 3/4”
3,5 MPa (35 bar), from 1”
ITEM
SIZE
DN
A
I
B
J
C
H
R251S
1/2”
3/4”
1”
14
18
22
59
69
81
27
31
38
48
64
73
15
18
23
77
94
94
25
32
39
Materials
Body:
Sleeve:
Stem:
J
B
C
I
H
A
Ball:
Gaskets:
Handle:
glass-charged polyamide extended T with reinforcing plate
on the steel base
Nut:
185°C at 1,05 MPa (10,5 bar)
3,5 MPa (35 bar), from 1” to 2”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R251TH
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
10
14
18
22
28
35
45
45
54
62
75
84
93
107
22
27
31
38
42
46
54
75
77
86
95
104
136
107
14
15
18
23
28
33
41
78
78
78
78
78
98
98
21
25
32
39
48
55
67
27
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
H
I
185°C at 1,05 MPa (10,5 bar)
3,5 MPa (35 bar), from 1” to 1”1/4
0,5 MPa (5bar)
A
ITEM
SIZE
DN
A
I
B
J
C
H
R253D
R253W
3/8”
1/2”
3/4”
1”
1”1/4
10
14
18
22
28
58
66
76
88
104
22
27
31
38
42
49
51
60
69
78
14
15
18
23
28
63
63
73
73
73
19
22
29
36
44
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
Max. working pressure with water and not dangerous gas:
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 3/8” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
0,5 MPa (5bar)
A
28
ITEM
SIZE
DN
A
I
B
J
C
H
R253DL
R253WL
3/8”
1/2”
3/4”
1”
1”1/4
10
14
18
22
28
58
66
76
88
104
22
27
31
38
42
46
48
64
73
82
14
15
18
23
28
77
77
94
94
94
19
22
29
36
44
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
H
I
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 1/4” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
0,5 MPa (5bar)
A
ITEM
SIZE
DN
A
I
B
J
C
H
R254D
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
8
10
14
18
22
28
51
55
64
74
86
100
21
22
27
31
38
42
35
49
51
60
69
78
10
14
15
18
23
28
40
63
63
73
73
73
17
21
25
32
39
48
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
H
I
A
Max. working conditions with dry saturated steam: 185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 3/8” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
ITEM
SIZE
DN
A
I
B
J
C
H
R254W
3/8”
1/2”
3/4”
1”
1”1/4
10
14
18
22
28
59
68
79
92
107
24
28
33
40
46
49
51
60
69
78
14
15
18
23
28
63
63
73
73
73
21
25
32
39
48
29
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
CW617NN - EN 12165 hot-pressed brass, chrome plated
I
H
A
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 1/4” to 3/4”
3,5 MPa (35 bar), from 1” to 2”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R254DL
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
8
10
14
18
22
28
35
45
51
55
64
74
86
100
105
124
21
22
27
31
38
42
46
54
36
46
48
64
73
82
100
115
10
14
15
18
23
28
33
41
42
77
77
94
94
94
136
136
17
21
25
32
39
48
55
67
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
4,2 MPa (42 bar), from 3/8” to 3/4”
3,5 MPa (35 bar), from 1” to 2”
30
ITEM
SIZE
DN
A
I
B
J
C
H
R254WL
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
10
14
18
22
28
35
45
59
68
79
92
107
114
138
24
28
33
40
46
50
61
46
48
64
73
82
100
115
14
15
18
23
28
33
41
77
77
94
94
94
136
136
21
25
32
39
48
55
67
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Cap:
Ogiva:
Stem:
J
B
C
H
I
CW614N – EN 12164 bar turned brass
Ball:
Gaskets:
Handle:
Nut:
A
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), for 15 and 22
3,5 MPa (35 bar), for 28
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R258CC
ø15
ø22
ø28
14
18
22
71
87
97
32
40
45
49
64
73
15
18
23
77
94
94
26
35
41
Materials
Body:
Sleeve:
Stem:
B lev
C lev
J
B
C
oppure painted aluminium T-handle
Ball:
Gaskets:
Handle:
Nut:
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 15 to 22
3,5 MPa (35 bar), from 28 to 35
0,5 MPa (5bar)
I
A
ITEM
SIZE
DN
A
I
B lev
B
J
C lev
C
R258D
ø15
ø18
ø22
ø28
ø35
14
15
18
22
28
56
65
79
96
107
28
32
40
48
53
49
51
64
73
82
51
54
60
69
78
15
16
18
23
28
77
77
94
94
94
63
63
73
73
73
31
Materials
Body:
Sleeve:
C
Cap:
B
Pipe union:
Stem:
H
Ball:
Gaskets:
Handle:
Nut:
a
J
b
H’
I
A
(except brass-finished R259T)
(except brass-finished R259T) con guarnizione in PTFE
4,2 MPa (42 bar), from 1/2” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
ITEM
SIZE (axb)
DN
A
I
B
J
C
H
H’
R259D
R259T
1/2”x1/2”
1/2”x3/4”
3/4”x3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
14
14
18
18
22
22
28
86
87
96
101
110
114
125
27
27
31
31
38
38
42
53
57
63
67
72
76
80
17
21
21
26
26
30
30
63
63
73
73
73
73
73
25
25
32
32
39
39
48
30
38
38
46
46
53
53
Materials
Body:
Sleeve:
C
Cap:
B
Pipe union:
Stem:
H
Ball:
Gaskets:
Handle:
Nut:
a
J
b
H’
I
A
(except brass-finished R259T) con guarnizione in PTFE
4,2 MPa (42 bar), from 1/2” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
32
ITEM
SIZE (axb)
DN
A
I
B
J
C
H
H’
R259W
1/2”x1/2”
1/2”x3/4”
3/4”x3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
14
14
18
18
22
22
28
90
93
103
107
116
121
134
28
28
33
33
40
40
46
53
57
63
67
72
76
80
17
21
21
26
26
30
30
63
63
73
73
73
73
73
25
25
32
32
39
39
48
30
38
38
46
46
53
53
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Cap:
Pipe union:
Stem:
C
B
Ball:
Gaskets:
Handle:
Nut:
a
J
b
CW617N - EN 12165 hot-pressed brass, chrome plated.
CW614N – EN 12164 bar turned brass with inner and outer
H’
H
I
A
4,2 MPa (42 bar), for 1/2” to 3/4”
3,5 MPa (35 bar), for 1”
ITEM
SIZE (axb)
DN
A
I
B
J
C
H
H’
R259DC
1/2”x15
3/4”x22
1”x28
14
18
22
74
86
103
27
31
38
53
63
72
17
21
25
63
73
73
25
32
39
30
38
46
Materials
Body:
Sleeve:
Cap:
Pipe union:
C
B
Stem:
a
J
b
H’
I
Ball:
Gaskets:
Handle:
Nut:
con guarnizione in PTFE
H
A
4,2 MPa (42 bar), from 1/2” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
ITEM
SIZE (axb)
DN
A
I
B
J
C
H
H’
R259DS
1/2”x1/2”
1/2”x3/4”
3/4”x3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
14
14
18
18
22
22
28
91
93
102
107
116
120
138
32
32
37
37
53
53
56
53
57
63
67
72
76
80
17
21
21
26
26
30
30
63
63
73
73
73
73
73
25
25
32
32
39
39
48
30
38
38
46
46
53
53
33
Materials
Body:
Sleeve:
Stem:
C
B
Ball:
Gaskets:
Handle:
Nut:
b
J
a
I
H
A
3,5 MPa (35 bar)
ARTICoLo
SIZE (axb)
DN
A
I
B
J
C
H
R285
1”x1”1/2
1”1/4x1”1/2
1”1/4x2”
22
28
28
79
88
88
42
46
46
92
110
110
23
28
28
73
73
73
39
48
48
Materials
C
Body:
Sleeve:
Stem:
B
Ball:
Gaskets:
Handle:
Nut:
b
J
a
I
H
A
3,5 MPa (35 bar)
34
ITEM
SIZE (axb)
DN
A
I
B
J
C
H
R285L
1”x1”1/2
1”1/4x1”1/2
1”1/4x2”
22
28
28
79
88
88
42
46
46
95
113
113
23
28
28
94
94
94
39
48
48
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
185°C at 1,05 MPa (10,5 bar)
3,5 MPa (35 bar), from 1/4” to 3/4”
2,8 MPa (28 bar), from 1” to 2”
0,5 MPa (5bar)
A
ITEM
SIZE
DN
A
I
B
J
C
H
R850
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
8
10
15
20
25
32
40
50
43
46
53
60
74
84
95
109
21
23
27
30
37
42
47
54
37
45
51
67
76
85
104
120
10
12
16
20
24
29
35
43
43
77
77
94
94
94
136
136
17
20
25
31
38
47
54
66
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
185°C at 1,05 MPa (10,5 bar)
3,5 MPa (35 bar), from 1/4” to 3/4”
2,8 MPa (28 bar), from 1” to 1”1/4
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R851
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
8
10
15
20
25
32
43
46
53
60
74
84
21
23
27
30
37
42
35
47
54
63
72
82
10
12
16
20
24
29
40
63
63
73
73
73
17
20
25
31
38
47
35
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
glass-charged polyamide extended T with reinforcing plate
on the steel base
Nut:
B
C
J
I
185°C at 1,05 MPa (10,5 bar)
3,5 MPa (35 bar), from 3/8” to 3/4”
2,8 MPa (28 bar), from 1” to 2”
0,5 MPa (5bar)
H
A
ITEM
SIZE
DN
A
I
B
J
C
H
R851TH
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
10
15
20
25
32
40
50
46
53
60
74
84
95
109
23
27
30
37
42
47
54
73
80
89
98
108
141
156
12
16
20
24
29
35
43
78
78
78
78
78
96
96
20
25
31
38
47
54
66
Materials
Body:
J
B
C
I
CW617N - EN 12165 hot-pressed brass
with double food-use EPDM black O-ring according to EN 681
Sleeve:
with double food-use EPDM black O-ring according to EN 681-1 for
R850VW valves
Stem:
Ball:
Gaskets:
Handle:
Nut:
A
2,8 MPa (28 bar)
36
ITEM
SIZE
DN
A
I
B
J
C
R850V
R850VW
ø15
ø22
ø28
ø35
ø42
ø54
15
20
25
32
40
50
100
116
122
130
148
187
50
58
61
65
74
91
53
69
77
87
106
121
16
20
25
30
36
43
77
94
94
94
136
136
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
C
CW617N - EN 12165 hot-pressed brass, with double food-use
EPDM black O-ring according to EN 681
CW614N - EN 12164 bar turned brass, with inner and outer
glass-charged polyamide extended T handle with reinforcing plate
on the steel base
Sleeve:
Ball:
Gaskets:
Handle:
J
B
Stem:
Nut:
I
A
3,5 MPa (35 bar), from 15 to 22
2,8 MPa (28 bar), for 28 and 35
ITEM
SIZE
DN
A
I
B
J
C
R851VT
ø15
ø18
ø22
ø28
ø35
15
15
20
25
32
100
100
116
122
130
50
50
58
61
65
80
81
90
98
108
16
17
20
25
30
78
78
78
78
78
Materials
C lev
B lev
Body:
B
C
b
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
a
on the steel base, steel lever with plastic coating
I
H
A
3,5 MPa (35 bar), from 15 to 22
2,8 MPa (28 bar), from 28 to 54
ITEM
SIZE (axb)
DN
A
I
B
B lev
J
C
C lev
H
R850VWS
R851VTS
1/2”x 15
1/2”x18
3/4”x 22
1”x 28
1”1/4x35
1”1/2x42
2”x54
15
15
20
25
32
40
50
84
84
95
105
122
141
165
34
34
37
44
57
62
69
81
81
91
99
108
-
107
122
17
17
21
25
30
37
44
78
78
78
78
78
-
137
137
25
25
31
39
47
54
67
37
Materias
C lev
B lev
Body:
H
Stem:
Nut:
b
J
a
Sleeve:
Ball:
Gaskets:
Handle:
B
C
3,5 MPa (35 bar), from 15 to 22
2,8 MPa (28 bar), from 28 to 54
I
A
ITEM
SIZE (axb)
DN
A
I
B
B lev
J
C
C lev
H
R853VT
R853VWL
1/2”x 15
1/2”x18
3/4”x 22
1”x 28
1”1/4x35
1”1/2x42
2”x54
15
15
20
25
32
40
50
87
87
99
107
120
136
159
50
50
57
61
65
79
91
81
81
91
99
108
-
107
122
17
17
21
25
30
37
44
78
78
78
78
78
-
137
137
25
25
31
39
47
54
67
Materias
C lev
B lev
Body:
C
Sleeve:
Stem:
B
Ball:
Gaskets:
Handle:
Nut:
b
J
a
H
3,5 MPa (35 bar), from 15 to 22
2,8 MPa (28 bar), from 28 to 54
I
A
38
ITEM
SIZE (axb)
DN
A
I
B
B lev
J
C
C Lev
H
R854VT
R854VWL
1/2”x 15
1/2”x18
3/4”x 22
1”x 28
1”1/4x35
1”1/2x42
2”x54
15
15
20
25
32
40
50
80
92
95
102
113
131
153
50
50
58
61
65
79
91
81
81
91
99
108
-
107
122
17
17
21
25
30
37
44
78
78
78
78
78
-
137
137
25
25
31
39
47
54
67
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
C
Sleeve:
B
Stem:
b
J
a
Ball:
Gaskets:
Handle:
Nut:
H
on the steel base
I
A
3,5 MPa (35 bar), from 15 to 22
2,8 MPa (28 bar), from 58 to 35
ITEM
SIZE (axb)
DN
A
I
B
J
C
H
R859VT
1/2”x 15
1/2”x18
3/4”x 22
1”x 28
1”1/4x35
15
15
20
25
32
112
112
127
135
150
50
58
57
61
65
81
81
91
100
108
17
17
21
26
30
78
78
78
78
78
30
30
38
46
53
Materials
Body:
Sleeve:
Stem:
J
B
C
I
Ball:
Gaskets:
Handle:
Nut:
CW617NN - EN 12165 hot-pressed brass, chrome plated, nickel plated
H
A
185°C a 1,05 MPa (10,5 bar)
3,5 MPa (35 bar), from 1” to 2”
2,8 MPa (28 bar), from 2”1/2 to 4”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R910
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
2”1/2
3”
4”
8
10
15
20
25
32
40
50
65
80
100
43
49
56
62
76
86
97
111
153
173
217
21
25
28
31
38
43
48
55
76
87
108
36
46
52
69
77
87
108
124
169
188
241
10
13
16
21
25
30
37
46
58
68
88
42
77
77
95
95
95
137
137
187
187
257
17
21
25
31
39
47
54
67
82
96
126
39
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
4,2 MPa (42 bar), from 1/2” to 3/4”
3,5 MPa (35 bar), from 1” to 2”
120°C
Max. operating working temperature:
ITEM
SIZE
DN
A
I
B
J
C
H
R910S
1/2”
3/4”
1”
1”1/4
1”1/2
2”
15
20
25
32
40
50
62
68
82
100
110
125
34
37
44
57
62
69
52
69
77
87
108
124
16
21
25
30
37
46
77
95
95
95
137
137
25
31
39
47
54
67
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
40
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 1/4” to 3/4”
3,5 MPa (35 bar), from 1” to 1/4”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R911
3/8”
1/2”
3/4”
1”
1”1/4
10
15
20
25
32
49
56
62
76
86
25
28
31
38
43
48
56
64
72
82
13
16
21
25
30
63
63
73
73
73
21
25
31
39
47
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
H
I
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 3/8” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
0,5 MPa (5bar)
A
ITEM
SIZE
DN
A
I
B
J
C
H
R913
3/8”
1/2”
3/4”
1”
1”1/4
10
15
20
25
32
63
73
82
92
108
25
28
31
38
43
48
56
64
72
82
13
16
21
25
30
63
63
73
73
73
21
25
31
39
47
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 3/8” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
0,5 MPa (5bar)
A
ITEM
SIZE
DN
A
I
B
J
C
H
R913L
3/8”
1/2”
3/4”
1”
1”1/4
10
15
20
25
32
63
73
82
92
108
25
28
31
38
43
46
52
69
77
87
13
16
21
25
30
77
77
95
95
95
21
25
31
39
47
41
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
H
I
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 1/4” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
0,5 MPa (5bar)
A
ITEM
SIZE
DN
A
I
B
J
C
H
R914
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
8
10
15
20
25
32
51
59
67
76
87
101
21
25
28
31
38
43
48
56
64
72
82
10
13
16
21
25
30
63
63
73
73
73
17
21
25
31
39
47
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
42
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 1/4” to 3/4”
3,5 MPa (35 bar), from 1” to 2”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R914L
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
8
10
15
20
25
32
40
50
51
59
67
76
87
101
105
124
21
25
28
31
38
43
48
55
36
46
52
69
77
87
108
124
10
13
16
21
25
30
37
46
42
77
77
95
95
95
137
137
17
21
25
31
39
47
54
67
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
CW617NN - EN 12165 hot-pressed brass, chrome plated,
steel lever with plasticized coating.
I
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 15 to 22
3,5 MPa (35 bar), from 28 to 35
0,5 MPa (5bar)
A
ITEM
SIZE
DN
A
I
B
J
C
R918
15
22
28
35
15
20
25
32
58
80
97
109
29
40
49
55
53
69
77
87
16
21
25
30
77
77
95
95
Materials
Body:
Sleeve:
Cap:
Pipe union:
Stem:
B
C
a
J
b
H’
I
H
Ball:
Gaskets:
Handle:
Nut:
CW617N - EN 12165 hot-pressed brass, nickel plated with PTFE gaskets.
PTFE with low friction profile.
painted aluminium T-handle.
A
4,2 MPa (42 bar), from 1/4” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
ITEM
SIZE (axb)
DN
A
I
B
J
C
H
H’
R919
1/2”x1/2”
1/2”x3/4”
3/4”x3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
15
15
20
20
25
25
32
87
90
97
101
109
115
123
28
28
31
31
38
38
43
55
59
65
67
72
77
82
17
21
21
23
25
30
30
63
63
73
73
73
73
73
25
25
31
31
39
39
47
30
38
38
46
46
53
53
43
Materials
Body:
Sleeve:
Cap:
Pipe union:
Stem:
B
C
a
J
b
H’
H
I
Ball:
Gaskets:
Handle:
Nut:
CW617N - EN 12165 hot-pressed brass, nickel plated with PTFE gaskets.
PTFE with low friction profile.
painted aluminium T-handle.
A
4,2 MPa (42 bar), from 1/4” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
ITEM
SIZE (axb)
DN
A
I
B
J
C
H
H’
R919S
1/2”x1/2”
1/2”x3/4”
3/4”x3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
15
15
20
20
25
25
32
93
96
103
107
115
121
135
34
34
37
37
44
44
57
55
59
65
67
72
77
82
17
21
21
23
25
30
30
63
63
73
73
73
73
73
25
25
31
31
39
39
47
30
38
38
46
46
53
53
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
I
H
A
44
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 1/4” to 3/4”
3,5 MPa (35 bar), from 1” to 2”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R950
R950W
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
8
10
15
20
25
32
40
50
43
49
60
68
81
95
104
126
21
25
30
34
41
48
52
63
36
47
53
69
77
87
107
122
10
13
16
21
25
30
36
44
42
77
77
95
95
95
137
137
17
21
26
32
41
50
55
70
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
J
B
C
H
I
A
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), from 1/4” to 3/4”
3,5 MPa (35 bar), from 1” to 1”1/4
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R951
R951W
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
8
10
15
20
25
32
43
49
60
68
81
95
21
25
30
34
41
48
35
48
54
64
72
82
10
13
16
21
25
30
42
63
63
73
73
73
17
21
26
32
41
50
Materials
Body:
Sleeve:
Stem:
C
J
B
Ball:
Gaskets:
Handle:
Nut:
H
I
A
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), for 1/2” and 3/4”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R780
1/2”
3/4”
1”
15
20
25
50
58
69
18
21
25
78
86
97
40
43
50
63
73
73
26
32
41
45
Materials
Body:
Sleeve:
Stem:
C
J
B
Ball:
Gaskets:
Handle:
Nut:
H
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), for 1/2” and 3/4”
3,5 MPa (35 bar), for 1”
0,5 MPa (5bar)
I
A
ITEM
SIZE
DN
A
I
B
J
C
H
R780L
1/2”
3/4”
1”
15
20
25
50
58
69
18
21
25
76
90
101
40
43
50
77
94
94
26
32
41
Materials
Body:
Sleeve:
Stem:
C
J
B
Ball:
Gaskets:
Handle:
Nut:
H
I
A
46
H’
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), for 1/2” and 3/4”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
H’
R781
1/2”
3/4”
1”
15
20
25
58
67
79
18
21
25
71
82
94
33
39
46
63
73
73
22
29
36
26
32
41
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Stem:
C
J
B
Ball:
Gaskets:
Handle:
Nut:
H
H’
I
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), for 1/2” and 3/4”
3,5 MPa (35 bar), for 1”
0,5 MPa (5bar)
A
ITEM
SIZE
DN
A
I
B
J
C
H
H’
R781L
1/2”
3/4”
1”
15
20
25
58
67
79
18
21
25
69
86
98
33
39
46
77
94
94
22
29
36
26
32
41
Materials
Body:
Sleeve:
Stem:
C
J
B
Ball:
Gaskets:
Handle:
Nut:
H
H’
I
A
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), for 1/2” and 3/4”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
H’
R782
1/2”
3/4”
1”
15
20
25
58
67
79
18
21
25
78
86
97
40
43
50
63
73
73
22
29
36
26
32
41
47
Materials
C
CW617 - EN 12165 hot-pressed brass, chrome-plated
CW617 - EN 12165 hot-pressed brass, chrome-plated
CW614 – EN 12164 bar turned brass, with inner and outer
CW617 brass, chrome-plated
Ball:
Gaskets:
Handle:
Nut:
B
J
Body:
Sleeve:
Stem:
H
H’
I
A
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), for 1/2” and 3/4”
3,5 MPa (35 bar), for 1”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
H’
R782L
1/2”
3/4”
1”
15
20
25
58
67
79
18
21
25
76
90
101
40
43
50
77
94
94
22
29
36
26
32
41
Materials
Body:
Sleeve:
Stem:
C
J
B
Ball:
Gaskets:
Handle:
Nut:
H
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), for 1/2” and 3/4”
0,5 MPa (5bar)
ITEM
SIZE
DN
A
I
B
J
C
H
R783
1/2”
3/4”
1”
15
20
25
50
58
69
18
21
25
71
82
94
33
39
46
63
73
73
26
32
41
A
48
I
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Stem:
C
J
B
Ball:
Gaskets:
Handle:
Nut:
H
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), for 1/2” and 3/4”
3,5 MPa (35 bar), for 1”
0,5 MPa (5bar)
I
A
ITEM
SIZE
DN
A
I
B
J
C
H
R783L
1/2”
3/4”
1”
15
20
25
50
58
69
18
21
25
69
86
98
33
39
46
77
94
94
26
32
41
Materials
Body:
Sleeve:
Cap:
Pipe union:
Stem:
J
B
C
H’
H
I
A
CW617N - EN 12165 hot-pressed brass, chrome plated with PTFE gaskets
Ball:
Gaskets:
Handle:
Nut:
4,2 MPa (42 bar), for 1/2” and 3/4”
ITEM
SIZE
DN
A
I
B
J
C
H
H’
R789
1/2”
3/4”
1”
15
20
25
79
89
100
18
21
25
71
82
94
33
39
46
63
73
73
30
38
46
26
32
41
49
Materials
Body:
Sleeve:
Cap:
Pipe union:
Stem:
Ø
B
C
a
J
b
Ball:
Gaskets:
Handle:
H’
H
I
A
Nut:
CW614N – EN 12164 hot-pressed brass, chrome plated
CW614N – EN 12164 hot-pressed brass, chrome plated
mechanism with slow-down operation with painted aluminium
handwheel
4,2 MPa (42 bar), for 1/2” and 3/4”
ITEM
SIZE
DN
A
I
B
J
C
H
Ø
R289S
3/4”
20
107
40
77
21
20
32
58
Materials
Body:
Sleeve:
Cap:
C
CW617N - EN 12165 hot-pressed brass with stainless steel elastic ring and
vegetal fibre gasket
B
Stem:
a
J
b
H’
I
H
A
Ball:
Gaskets:
Handle:
Nut:
4,2 MPa (42 bar), from 1/2” and 3/4”
3,5 MPa (35 bar), for 1”
50
ITEM
SIZE (axb)
DN
A
I
B
J
C
H
H’
R251P
1/2”x 3/4”
3/4”x 3/4”
3/4”x 1”
1”x 1”
14
14
18
22
69
70
85
95
27
23
31
38
54
54
63
70
18
18
21
23
63
63
73
73
25
32
32
40
30
30
37
37
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
Materials
Body:
Sleeve:
Cap:
ring and
Stem:
B
C
a
J
b
H’
H
I
A
CW617N - EN 12165 hot-pressed brass with stainless steel elastic
vegetal fibre gasket
Ball:
Gaskets:
Handle:
Nut:
4,2 MPa (42 bar), from 1/2” and 3/4”
3,5 MPa (35 bar), for 1”
ARTICoLo
SIZE (axb)
DN
A
I
B
J
C
H
H’
R251WP
1/2”x 3/4”
3/4”x 3/4”
3/4”x 1”
1”x 1”
14
14
18
22
70
72
87
97
28
31
33
40
54
54
63
70
18
18
21
23
63
63
73
73
25
32
32
40
30
30
37
37
Materials
Body:
Sleeve:
Cap:
C
B
Stem:
a
J
b
Ball:
Gaskets:
Handle:
Nut:
CW617N - EN 12165 hot-pressed brass with stainless steel elastic ring
and vegetal fibre gasket
I
H
A
4,2 MPa (42 bar), for 1/2” and 3/4”
ITEM
SIZE (axb)
DN
A
I
B
J
C
H
R254P
1/2”x 3/4”
3/4”x 3/4”
14
14
71
76
29
34
54
54
18
18
63
63
30
30
51
Materials
Body:
Sleeve:
Cap:
C
CW617N - EN 12165 hot-pressed brass, chrome plated with
stainless steel elastic ring and vegetal fibre gasket
B
Stem:
Ball:
Gaskets:
Handle:
Nut:
a
J
b
H’
A1
A
H
I
A’
185°C at 1,05 MPa (10,5 bar)
4,2 MPa (42 bar), for 1/2” and 3/4”
ITEM
SIZE (axb)
DN
A
A1
A’
I
B
J
C
H
H’
R752
1/2”x3/4”
3/4”x1”
15
20
48
60
42
50
56
68
30
35
56
65
18
21
63
73
26
32
30
35
R790 - Materials
H’
R790F
Body:
Sleeve:
Stem:
Ball:
Gaskets:
Handle:
Nut:
Pressure outlet: made of brass with NBR-EN 549 washer
Rp
C
H”
B
L
J
Rp
R790
H’
I
V
A
R790F e R790V - Materiali
R790V
L
Cap:
Tail piece: CW617N - EN 12165 hot-pressed brass
Washer: NBR-EN 549
O-Ring: NBR-EN 549 and EN 682 for R790V
G
H
P
Gas systems for domestic use and similar from distribution net (UNI7129-1:2008)
Maximum working pressure (MOP) with gas: 0,5 MPa (5bar)
R790
52
R790V
R790F
ITEM
RP
A
I
Y
B
J
C
H
P
G
H’
H”
V
L
L
R790Y004
R790Y005
3/4”
1”
78
90
44
49
21
23
64
73
21
23
73
73
32
40
73
76
1”1/4
1”1/2
46
53
32
38
22
28
121
135
99
111
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
HEAD lOSSES
The head loss of a ball valve, depends on the geometry of internal passages, so it is crucial to establish it with experimental
measurements. Experimental values of Kv are useful to determine analytically the importance of the head loss.
mm H2O
millibar (mbar)
bar
Pa (N/m2)
KPa
1 mm H2O
1
9,81x10-2
9,81x10-5
9,81
9,81x10-3
1 millibar (mbar)
0,102x102
1
103
100
0,1
1 bar
0,102x10
10
3
1
10
102
1 Pa (N/m )
0,102
10
-2
10
1KPa
102
10
5
2
-5
10-2
5
1
10-3
1000
1
For fluids like water the Kv factor (specific feature of each adjustment element) can be used with the following
expression:
∆p=
Q
Kv
2
(*)
where: ∆p = head loss expressed in [bar]
Q = water flow expressed in [m3/h]
Kv = specific feature of each adjustment element
To express head losses in w.c. mm and flow rates in l/h the expression (*) will change as follows:
∆p=
Q
Kv
2
•
1
100
dove: ∆p = head loss expressed in [mm H2O]
Q = water flow expressed in [l/h]
Kv = specific feature of each adjustment element
53
R250D
R250WS
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R250X001
R250X002
R250X003
R250X004
R250X005
R250X006
R250X007
R250X008
R250X009
R250X010
R250X011
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
2”1/2
3”
4”
6,6
6,7
10,2
18,5
36,3
73,5
105
158
240
269
461
R250SX143
R250SX144
R250SX145
R250SX146
R250SX147
R250SX148
1/2”
3/4”
1”
1”1/4
1”1/2
2”
10,2
18,5
36,3
73,5
105
158
R250X021
R250X022
R250X023
R250X024
R250X025
R250X026
R250X027
R250X028
R250X029
R250X030
R250X031
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
2”1/2
3”
4”
6,6
6,7
10,2
18,5
36,3
73,5
105
158
240
269
461
R251D
PART NUMBER
SIZE
Kv
R251X001
R251X002
R251X003
R251X004
R251X005
R251X006
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
6,6
6,7
10,2
18,5
36,3
73,5
R251X021
R251X022
R251X023
R251X024
R251X025
R251X026
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
6,6
6,7
10,2
18,5
36,3
73,5
R250W
PART NUMBER
SIZE
Kv
R250WX022
R250WX023
R250WX024
R250WX025
R250WX026
R250WX027
R250WX028
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,7
10,2
18,5
36,3
73,5
105
158
R251W
PART NUMBER
SIZE
Kv
R251WX022
R251WX023
R251WX024
R251WX025
R251WX026
3/8”
1/2”
3/4”
1”
1”1/4
6,7
10,2
18,5
36,3
73,5
R250DS
54
R251S
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R250SX003
R250SX004
R250SX005
R250SX006
R250SX007
R250SX008
1/2”
3/4”
1”
1”1/4
1”1/2
2”
10,2
18,5
36,3
73,5
105
158
R251SX003
R251SX004
R251SX005
1/2”
3/4”
1”
10,2
18,5
36,3
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R253DL
R251T
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R251TX004
R251TX005
3/4”
1”
18,5
36,3
R251TY004
R251TY005
3/4”
1”
18,5
36,3
R253lX002
R253lX003
R253lX004
R253lX005
R253lX006
3/8”
1/2”
3/4”
1”
1”1/4
6,7
10,2
18,5
36,3
73,5
R253lX022
R253lX023
R253lX024
R253lX025
R253lX026
3/8”
1/2”
3/4”
1”
1”1/4
6,7
10,2
18,5
36,3
73,5
R251TH
PART NUMBER
SIZE
Kv
R251X052
R251X053
R251X054
R251X055
R251X056
R251X057
R251X058
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,7
10,2
18,5
36,3
73,5
105
158
R253WL
PART NUMBER
SIZE
Kv
R253WX032
R253WX033
R253WX034
R253WX035
R253WX036
3/8”
1/2”
3/4”
1”
1”1/4
6,7
10,2
18,5
36,3
73,5
R253D
R254D
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R253X002
R253X003
R253X004
R253X005
R253X006
3/8”
1/2”
3/4”
1”
1”1/4
6,7
10,2
18,5
36,3
73,5
R253X022
R253X023
R253X024
R253X025
R253X026
3/8”
1/2”
3/4”
1”
1”1/4
6,7
10,2
18,5
36,3
73,5
R254X001
R254X002
R254X003
R254X004
R254X005
R254X006
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
6,6
6,7
10,2
18,5
36,3
73,5
R254X021
R254X022
R254X023
R254X024
R254X025
R254X026
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
6,6
6,7
10,2
18,5
36,3
73,5
R253W
R254W
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R253WX002
R253WX003
R253WX004
R253WX005
R253WX006
3/8”
1/2”
3/4”
1”
1”1/4
6,7
10,2
18,5
36,3
73,5
R254WX022
R254WX023
R254WX024
R254WX025
R254WX026
3/8”
1/2”
3/4”
1”
1”1/4
6,7
10,2
18,5
36,3
73,5
55
R259D
R254DL
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R254lX001
R254lX002
R254lX003
R254lX004
R254lX005
R254lX006
R254lX007
R254lX008
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,6
6,7
10,2
18,5
36,3
73,5
105
158
R259X003
R259X004
R259X005
R259X006
R259X007
R259X008
R259X009
1/2”x 1/2”
1/2”x3/4”
3/4”x3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
10,2
10,2
18,5
18,5
36,3
36,3
73,5
R254lX021
R254lX022
R254lX023
R254lX024
R254lX025
R254lX026
R254lX027
R254lX028
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,6
6,7
10,2
18,5
36,3
73,5
105
158
R259Y003
R259Y005
R259Y006
R259Y007
R259Y008
R259Y009
1/2”x 1/2”
3/4”x3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
10,2
18,5
18,5
36,3
36,3
73,5
R259W
R254WL
PART NUMBER
SIZE
Kv
R254WX052
R254WX053
R254WX054
R254WX055
R254WX056
3/8”
1/2”
3/4”
1”
1”1/4
6,7
10,2
18,5
36,3
73,5
PART NUMBER
SIZE
Kv
R259WX023
R259WX024
R259WX025
R259WX026
R259WX027
R259WX028
R259WX029
1/2”x1/2”
1/2”x3/4”
3/4”x3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
10,2
10,2
18,5
18,5
36,3
36,3
73,5
R258CC
R259DC
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R258CX002
R258CX005
R258CX006
ø15
ø22
ø28
10,2
18,5
36,3
R259CX003
R259CX005
R259CX007
1/2”x15
3/4”x22
1”x28
10,2
18,5
55,0
R258D
56
R259DS
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R258Y012
R258Y014
R258Y015
R258Y016
R258Y017
ø15
ø18
ø22
ø28
ø35
10,2
12,7
18,5
36,3
73,5
R258Y002
R258Y004
R258Y005
R258Y006
R258Y007
ø15
ø18
ø22
ø28
ø35
10,2
12,7
18,5
36,3
73,5
R259SX003
R259SX004
R259SX005
R259SX006
R259SX007
R259SX008
R259SX009
1/2”x 1/2”
1/2”x3/4”
3/4”x3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
10,2
10,2
18,5
18,5
36,3
36,3
73,5
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R259T
R851
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R259TY005
R259TY006
R259TY007
3/4”x3/4”
3/4”x1”
1”x1”
18,5
18,5
36,3
R851X021
R851X022
R851X023
R851X024
R851X025
R851X026
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
6,6
6,7
12,7
24,6
48,5
98,0
R851X001
R851X002
R851X003
R851X004
R851X005
R851X006
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
6,6
6,7
12,7
24,6
48,5
98,0
R285
PART NUMBER
SIZE
Kv
R285Y001
R285Y002
R285Y003
1”x1”1/2
1”1/4x1”1/2
1”1/4x2”
36,3
73,5
73,5
R851TH
R285L
PART NUMBER
SIZE
Kv
R285lY001
R285lY002
R285lY003
1”x1”1/2
1”1/4x1”1/2
1”1/4x2”
36,3
73,5
73,5
PART NUMBER
SIZE
Kv
R851TX002
R851TX003
R851TX004
R851TX005
R851TX006
R851TX007
R851TX008
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,7
12,7
24,6
48,5
98,0
140
211
R850
PART NUMBER
SIZE
Kv
R850X021
R850X022
R850X023
R850X024
R850X025
R850X026
R850X027
R850X028
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,6
6,7
12,7
24,6
48,5
98,0
140
211
R850X001
R850X002
R850X003
R850X004
R850X005
R850X006
R850X007
R850X008
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,6
6,7
12,7
24,6
48,5
98,0
140
211
R850V
PART NUMBER
SIZE
Kv
R850VY103
R850VY104
R850VY105
R850VY106*
R850VY107*
R850VY108*
ø15
ø22
ø28
ø35
ø42
ø54
12,7
24,6
48,5
98,0
140
211
R850VW
PART NUMBER
SIZE
Kv
R850VY137
R850VY138
ø42
ø54
140
211
57
R851VT
R854VWL
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R851VY103
R851VY104
R851VY105
R851VY106
ø15
ø22
ø28
ø35
12,7
24,6
48,5
98,0
R854VY137
R854VY138
Ø42x1”1/2
Ø54x2”
140
211
R859VT
R850VWS
PART NUMBER
SIZE
Kv
R850VY157
R850VY158
Ø42x1”1/2
Ø54x2”
140
211
PART NUMBER
SIZE
Kv
R859VY102
R859VY103
R859VY104
R859VY105
R859VY106
Ø18x1/2”
Ø15x1/2”
Ø22x3/4”
Ø28x1”
Ø35x1”1/4
12,7
12,7
24,6
48,5
98,0
R851VTS
PART NUMBER
SIZE
Kv
R851VY152
R851VY153
R851VY154
R851VY155
R851VY156
Ø18x 1/2”
Ø15x 1/2”
Ø22x 3/4”
Ø28x 1”
Ø35x 1”1/4
12,7
12,7
24,6
48,5
98,0
R853VT
PART NUMBER
SIZE
Kv
R853VY102
R853VY103
R853VY104
R853VY105
R853VY106
Ø18x 1/2”
Ø15x 1/2”
Ø22x 3/4”
Ø28x 1”
Ø35x 1”1/4
12,7
12,7
24,6
48,5
98,0
R853VWL
PART NUMBER
SIZE
Kv
R853VY137
R853VY138
Ø42x1”1/2
Ø54x2”
140
211
R910
PART NUMBER
SIZE
Kv
R910X022
R910X023
R910X024
R910X025
R910X026
R910X027
R910X028
R910X029
R910X030
R910X031
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
2”1/2
3”
4”
7,0
13,3
25,8
50,9
103
147
222
336
377
645
R910X002
R910X003
R910X004
R910X005
R910X006
R910X007
R910X008
R910X009
R910X010
R910X011
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
2”1/2
3”
4”
7,0
13,3
25,8
50,9
103
147
222
336
377
645
R910S
R854VT
58
PART NUMBER
SIZE
Kv
R854VY102
R854VY103
R854VY104
R854VY105
R854VY106
Ø 18x1”1/2
Ø 15x1/2”
Ø 22x3/4”
Ø 28x1”
Ø35x1”1/4
12,7
12,7
24,6
48,5
98,0
PART NUMBER
SIZE
Kv
R910SX003
R910SX004
R910SX005
R910SX006
R910SX007
R910SX008
1/2”
3/4”
1”
1”1/4
1”1/2
2”
13,3
25,8
50,9
103
147
222
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R911
R914L
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R911X022
R911X023
R911X024
R911X025
R911X026
3/8”
1/2”
3/4”
1”
1”1/4
7,0
13,3
25,8
50,9
103
R911X002
R911X003
R911X004
R911X005
R911X006
3/8”
1/2”
3/4”
1”
1”1/4
7,0
13,3
25,8
50,9
103
R914lX021
R914lX022
R914lX023
R914lX024
R914lX025
R914lX026
R914lX027
R914lX028
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,9
7,0
13,3
25,8
50,9
103
147
222
R914lX001
R914lX002
R914lX003
R914lX004
R914lX005
R914lX006
R914lX007
R914lX008
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,9
7,0
13,3
25,8
50,9
103
147
222
R913
PART NUMBER
SIZE
Kv
R913X022
R913X023
R913X024
R913X025
R913X026
3/8”
1/2”
3/4”
1”
1”1/4
7,0
13,3
25,8
50,9
103
R913L
PART NUMBER
SIZE
Kv
R913lX022
R913lX023
R913lX024
R913lX025
R913lX026
3/8”
1/2”
3/4”
1”
1”1/4
7,0
13,3
25,8
50,9
103
R914
PART NUMBER
SIZE
Kv
R914X021
R914X022
R914X023
R914X024
R914X025
R914X026
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
6,9
7,0
13,3
25,8
50,9
103
R914X001
R914X002
R914X003
R914X004
R914X005
R914X006
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
6,9
7,0
13,3
25,8
50,9
103
R918
PART NUMBER
SIZE
Kv
R918Y003
R918Y004
R918Y005
R918Y006
15
22
28
35
13,3
25,8
50,9
103
R919
PART NUMBER
SIZE
Kv
R919X003
R919X004
R919X005
R919X006
R919X007
R919X008
R919X009
1/2”x1/2”
1/2”x3/4”
3/4”x 3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
13,3
13,3
25,8
25,8
50,9
50,9
103
R919S
PART NUMBER
SIZE
Kv
R919SX003
R919SX004
R919SX005
R919SX006
R919SX007
R919SX008
R919SX009
1/2”x1/2”
1/2”x3/4”
3/4”x 3/4”
3/4”x1”
1”x1”
1”x1”1/4
1”1/4x1”1/4
13,3
13,3
25,5
25,5
50,9
50,9
103
59
R950
R951W
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R950X021
R950X022
R950X023
R950X024
R950X025
R950X026
R950X027
R950X028
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,9
7,0
13,3
25,8
50,9
103
147
222
R951WX002
R951WX003
R951WX004
R951WX005
R951WX006
3/8”
1/2”
3/4”
1”
1”1/4
7,0
13,3
25,8
50,9
103
R950X001
R950X002
R950X003
R950X004
R950X005
R950X006
R950X007
R950X008
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
6,9
7,0
13,3
25,8
50,9
103
147
222
R780
PART NUMBER
SIZE
Kv
R780X003
R780X004
R780X005
1/2”
3/4”
1”
4,8
8,0
21,3
R950W
PART NUMBER
SIZE
Kv
R950WX002
R950WX003
R950WX004
R950WX005
R950WX006
R950WX007
R950WX008
3/8”
1/2”
3/4”
1”
1”1/4
1”1/2
2”
7,0
13,3
25,8
50,9
103
147
222
R780L
PART NUMBER
SIZE
Kv
R780lX003
R780lX004
R780lX005
1/2”
3/4”
1”
4,8
8,0
21,3
R781
R951
60
PART NUMBER
SIZE
Kv
R951X021
R951X022
R951X023
R951X024
R951X025
R951X026
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
6,9
7,0
13,3
25,8
50,9
103
R951X001
R951X002
R951X003
R951X004
R951X005
R951X006
1/4”
3/8”
1/2”
3/4”
1”
1”1/4
6,9
7,0
13,3
25,8
50,9
103
PART NUMBER
SIZE
Kv
R781X003
R781X004
R781X005
1/2”
3/4”
1”
4,8
8,0
21,3
R781L
PART NUMBER
SIZE
Kv
R781lX003
R781lX004
R781lX005
1/2”
3/4”
1”
4,8
8,0
21,3
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
R782
R251P
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R782X003
R782X004
R782X005
1/2”
3/4”
1”
4,8
8,0
21,3
R251PX003
R251PX004
R251PX005
R251PX006
1/2”x 3/4”
3/4”x 3/4”
3/4”x 1”
1”x 1”
10,2
10,2
18,5
36,3
R251PY003
R251PY004
R251PY005
R251PY006
1/2”x 3/4”
3/4”x 3/4”
3/4”x 1”
1”x 1”
10,2
10,2
18,5
36,3
R782L
PART NUMBER
SIZE
Kv
R782lX003
R782lX004
R782lX005
1/2”
3/4”
1”
4,8
8,0
21,3
R783
PART NUMBER
SIZE
Kv
R783X003
R783X004
R783X005
1/2”
3/4”
1”
4,8
8,0
21,3
R251WP
PART NUMBER
SIZE
Kv
R251WX053
R251WX054
R251WX055
R251WX056
1/2”x 3/4”
3/4”x 3/4”
3/4”x 1”
1” x 1”
10,2
10,2
18,5
36,3
R251WY053
R251WY054
R251WY055
R251WY056
1/2”x 3/4”
3/4”x 3/4”
3/4”x 1”
1” x 1”
10,2
10,2
18,5
36,3
R783L
PART NUMBER
SIZE
Kv
R783lX003
R783lX004
R783lX005
1/2”
3/4”
1”
4,8
8,0
21,3
R254P
PART NUMBER
SIZE
Kv
R254PX004
3/4”x 3/4”
10,2
R254PY003
R254PY004
1/2”x 3/4”
3/4”x 3/4”
10,2
10,2
R752
R789
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R789X003
R789X004
R789X005
1/2”x 1/2”
3/4”x 3/4”
1”x 1”
4,8
8,0
21,3
R752X003
R752X005
1/2”x 3/4”
3/4”x 1”
12,7
24,6
R790
R289S
PART NUMBER
SIZE
Kv
PART NUMBER
SIZE
Kv
R289SX004
3/4”
18,5
R790Y004
R790Y005
3/4”
1”
24,6
48,5
61
FITTINGS
R288 – Check in plastic material for ball valves for pump connection R285 and R285L.
PART NUMBER
SIZE
R288Y005
R288Y006
1”
1”1/4
Assembly diagram R288 on R285 or R285L
The check guarantees that water circulates in the direction imposed by the pump, the
opposite direction can damage the rotor and/or the electrical motor that drives it.
Flow
direct
ion
P31L – Lever handle for ball valves.
Narrow lever
RED LEVER HANDLE
YELLoW LEVER HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
P31lRY001
P31lRY002
P31lRY003
P31lRY004
P31lRY005
P31lRY005
1/4”
3/8”-1/2”
3/4”-1”-1”/4
1”1/2-2”
2”1/2-3”
4”
P31lGY001
P31lGY002
P31lGY003
P31lGY004
P31lGY005
P31lGY005
1/4”
3/8”-1/2”
3/4”-1”-1”/4
1”1/2-2”
2”1/2-3”
4”
B
A
SIZE
A
B
1/4”
3/8”-1/2”
3/4”-1”-1”1/4
1”1/2-2”
2”1/2-3”
4”
50
85
104
148
188
203
13
15
18
20
24
27
Large lever
RED LEVER HANDLE
B
A
62
YELLoW LEVER HANDLE
GREEN LEVER HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
PART NUMBER
SIZE
P31lRY102
P31lRY103
P31lRY104
3/8”-1/2”
3/4”-1”-1”1/4
1”1/2-2”
P31lGY102
P31lGY103
P31lGY104
3/8”-1/2”
3/4”-1”-1”1/4
1”1/2-2”
P31lVY102
P31lVY103
P31lVY104
3/8”-1/2”
3/4”-1”-1”1/4
1”1/2-2”
SIZE
A
B
3/8”-1/2”
3/4”-1”-1”1/4
1”1/2-2”
85
104
148
20
25
30
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
P31F - T handle for ball valves.
RED T HANDLE
YELLoW T HANDLE
GREEN T HANDLE
PART NUMBER
SIZE
PART NUMBER
SIZE
PART NUMBER
SIZE
P31FRY001
P31FRY002
P31FRY003
1/4”
3/8”-1/2”
3/4”-1”-1”1/4
P31FGY001
P31FGY002
P31FGY003
1/4”
3/8”-1/2”
3/4”-1”-1”1/4
P31FVY002
P31FVY003
3/8”-1/2”
3/4”-1”-1”1/4
R747 - Locking plate for ball valves lever handles.
PART NUMBER
SIZE
R747Y001
R747Y002
R747Y003
3/8”-1/2”
3/4”-1”-1”1/4
1”1/2-2”
R748 - Opening limiter for ball valves lever handles.
PART NUMBER
SIZE
R748Y001
R748Y002
R748Y003
3/8”-1/2”
3/4”-1”-1”1/4
1”1/2-2”
R749 - Wedge for ball valves handles.
PART NUMBER
SIZE
R749Y002
R749Y003
3/4”-1”-1”1/4
1”1/2-2”
R749F - Plastic extended T handle for ball vales.
H
L
P
R749FY001
R749FY002
R749FY003
3/8”-1/2”
3/4”-1”-1”1/4
1”1/2-2”
45
45
65
78
78
98
33
33
35
L
P
SIZE
H
PART NUMBER
Installation sequence
Unscrew the nut
with the special
wrench.
Remove the lever.
Position the
handle raised
R749F.
With the specific
socket wrench
tightly screw the
nut.
Apply the
covering plate.
63
R749T - Tubular wedge for ball valves handles.
CHRoME PLATED BRASS FINISHED
PART NUMBER
PART NUMBER
USE
H
H
R749TX001
R749TY001
3/8”-1/2” ball valves
with self-sealing nut
50
R749TX101
R749TY101
3/8”-1/2” ball valves with guarantee
seal and hologram
50
R749TX002
R749TY002
3/4”-1”-1”1/4 ball valves with
self-sealing nut
61,5
R749TX102
R749TY102
3/4”-1”-1”1/4 ball valves with
guarantee seal and hologram
61,5
R749TX003
R749TY003
1”1/2-2” ball valves
with self-sealing nut
81
R749TX103
R749TY103
1”1/2-2” ball valves with guarantee
seal and hologram
81
R749TX004
R749TX005
R749TY004
R749TY005
2”1/2-3” ball valves
4” ball valves and 2”1/2-3” nut
93,5
107
Installation sequence
Unscrew the nut
with the special
wrench.
64
Remove the lever.
Position the
handle raised
R749F.
Put back the lever
and with the
special wrench
tightly screw the
nut.
June 2010
0312EN
ISO 9001
0006/6
GENERAL
CATALOGUE
This technical communication has an indicative value. Giacomini S.p.A. has the right to make in anytime, without previous advice, modifications to the products contained in the present
communication for technical or commercial reasons. Information reported in this technical communication does not free the user from scrupulously following the existing technical instructions.
A reproduction, also partial, of the text is forbidden, except for previously written authorisation from the Management.
65
JUNE 2010 GIACOMINI tEChNICAl DOCUMENtAtION N° 0312EN
GIACOMINI SPA
Via per Alzo,39
28017 San Maurizio d’Opaglio (NO) ItAlY
tel. +39 0322 923 111 - fax +39 0322 96 256
e-mail: [email protected]
internet: www.giacomini.com

ball valves

Transcription

Similar documents

VALVOLE A SFERA 0312EN_modified2.indd

kugelhähne - SHK