SMPM / SMP / SMP-COM / SMP-MAX series

3
SMPM / SMP / SMP-COM / SMP-MAX series
R201 / R222
Pages
SMPM
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Plugs and Jacks .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Receptacles, Panel shrouds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 to 3-9
Adapters .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Panel drilling .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Assembly insteructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
SMP
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 to 3-14
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Plugs and jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17 to 3-18
Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18 to 3-21
Panel shroud .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21 to 3-22
SMPM/SMP/SMP-COM/SMP-MAX
CONTENTS
Glass bead .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Adapters .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22 to 3-23
Packaging .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Assembly instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24 to 3-25
SMP-COM
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
Plugs and jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Adapters .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Packaging .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28
Panel drilling .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Assembly instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
SMP-MAX
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32
Jacks and plugs .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33
Receptacles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34
Adapters .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35
Panel drilling .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-36
3-3
www.radiall.com
SMPM/SMP/SMP-COM
INTRODUCTION
50Ω
SMP
SMP-com
SMPM
DC - 40 GHz
DC - 12.4 GHz
DC-65GHz
GENERAL
•
•
•
•
Small, lightweight connectors
Snap-in, suitable for blindmate applications
Excellent vibration and shock performances
Allows axial and radial misalignment
APPLICATIONS
•
•
•
•
•
•
Active array antenna
Satellite
Airborne / Ship / Ground radar
Communication equipment
High speed electro-optical devices
Board to board applications
SMP series
Radiall SMP series meets MIL STD 348, figure 326 interface standard and DESC specifications 94007 & 94008. They are intermateable
with GPO® (Gilbert Engineering Inc.).
There are 3 levels of retention (applicable to the male connectors when ordering) which provide different levels of force required
to connect and disconnect the connectors:
Board to board distance
- full detent for a positive locking with a maximum retention
Center to center
Series
- limited detent for a positive locking with a medium retention
Distance on PCB With standard
With custom
- smooth bore for the lowest retention (slide connection).
parts
parts
4.45
mm
10.3
mm
6.7
mm
Radiall also offers multiport solutions with SMP interface
SMP
(.175’’)
(.405’’)
(.264’’)
allowing better alignment control while mating multiple
3.30 mm
8.75 mm
5.2 mm
connectors. The multiport concept increases density and allows
SMPM
(.130’’)
(.345’’)
(.205’’)
the operator to save installation time by connecting several
SMP connectors in one operation.
6.70 mm
6.40 mm
MMBX
(0.264’’)
(0.252’’)
SMP-COM
SMP-COM is an economically priced alternative fully intermateable with standard SMP connectors. It has been optimized to operate
up to 12.4 GHz meeting the needs of telecom applications. Compared to SMP primarily made of stainless steel material, SMP-COM
uses brass material.
SMPM
30% smaller than SMP, SMPM connectors are designed for very high frequency applications where space and package density
are a necessity.
Radiall SMPM series meets MIL STD 348, figure 328 interface standard. They are intermateable with GPPO® (Gilbert Engineering Inc.).
There are 2 levels of retention (applicable to the male connectors when ordering):
- full detent for a positive locking with a maximum retention
- smooth bore for a lower retention but higher durability (mating cycles).
Identification groove
for full detent
Unique visual identification groove: in order to easily identify full detent connectors
versus smooth bore, Radiall SMPM full detent receptacles feature a groove on the
outer body. This method of identification is an innovation by Radiall.
SMPM SMT receptacle
3-4
www.radiall.com
PLUG WITH FEMALE CENTER CONTACT
Letter
A
B
C
E
F
*
min.
mm
max.
2.41
1.73
min.
inch
max.
.095
SMPM
INTERFACE SMPM
Note
dia
.068
0.58
.023
0
0.20
0
.008
Center contact recession
1.27
.050
Accept 0.305 +/-0.025 (.012" +/-.001) dia pin
JACK WITH MALE CENTER CONTACT (FULL DETENT)
Letter
A
B
C
E
F
G
H
J
K

min.
2.18
2.08
0.53
0
0.76
0.28
2.11
2.82
0.25
25
mm
max.
2.24
2.13
0.58
0.12
1.14
0.33
2.16
2.92
0.56
35
min.
.086
.082
.021
0
.030
.011
.083
.111
.010
inch
max.
.088
.084
.023
.004
.045
.013
.085
.115
.022
Note
dia
dia
dia
dia
degree
JACK WITH MALE CENTER CONTACT (SMOOTH BORE)
Letter
A
B
E
F
G
J
K

min.
2.18
2.08
0
0.76
0.28
2.82
0.25
25
mm
max.
2.24
2.13
0.12
1.14
0.33
2.92
0.56
35
min.
.086
.082
0
.030
.011
.111
.010
inch
max.
.088
.084
.004
.045
.013
.115
.022
Note
dia
dia
dia
degree
3-5
www.radiall.com
SMPM
CHARACTERISTICS
Test/characteristics
Values/remarks
ELECTRICAL CHARACTERISTICS
Impedance
Frequency range
V.S.W.R.
• Straight styles
• Right angle styles
• Adapters
• Hermetic receptacles
Insertion loss (dB)
Insulation resistance (mΩ)
Voltage rating (V.R.M.S.)
Dielectric withstanding voltage (V.R.M.S.)
RF leakage (dB)
50Ω
DC - 65 GHz
1.10 to 12GHz / 1.15 to 26GHz /1.30 to 40GHz
1.25 to 12GHz /1.30 to 18GHz
1.10 to 12GHz / 1.20 to 40GHz / 1.30 to 65GHz
1.15 to 18GHz / 1.35 to 40GHz
0.10 × √F Max typ
5000
335
500
-80 to 3GHz / -65 from 3 to 40GHz
MECHANICAL CHARACTERISTICS
Mechanical endurance (durability)
Engagement and separation force (N)
Radial misalignment
Axial misalignment
Vibration
Shock
Thermal shock
Cable retention (N) .47"
.85"
Contact captivation axial (N)
smooth bore
500
18 max - 7 min.
full detent
100
36 max - 20 min.
± 0.25 mm (.010'')
0 / + 0.25 mm (.010'')
MIL-STD 202G Method 104, test condition D
MIL-STD 202G Method 213, test condition I
-65° C/ +125° C
> 45 N
> 200 N
6.7
ENVIRONMENTAL CHARACTERISTICS
Operating temperature
-65°C / +165°C
MATERIALS
Cable connector with female center contact
Cable connector with male center contact
Bodies
Soldering part
Receptacles, shrouds
In series adapters
Center contacts
Center contacts for glass seal
Insulators
Beryllium copper
Stainless steel, Beryllium copper
Brass
stainless steel & Beryllium copper
Beryllium copper
Beryllium copper
Iron nickel cobalt sealing alloy
Peek / PTFE
PLATING
Cable connector with female center contact
Cable connector with male center contact
Bodies
Soldering part
Receptacles, shrouds
Center contacts
Gold
Passivated
Gold
Passivated
Gold
3-6
www.radiall.com
STRAIGHT PLUGS, SOLDER TYPE FOR SEMI-RIGID CABLES
Fig. 1
Cable group
.047''semi-rigid
RG405
Cable group dia.
.047''
.085''
Part number
R201 051 000
R201 052 000
SMPM
PLUGs and jacks
Fig. 2
Fig
1
2
Captive Center contact
Finish
yes
Gold
RIGHT ANGLE PLUGS, FOR SEMI-RIGID AND FLEXIBLE CABLES
Fig. 1
Cable group
.047''semi-rigid
RG405
RG178/RG196
Cable group dia.
.047''
.085''
2 / 50S
Fig. 2
Part number
R201 151 000
R201 152 000
R201 170 110
Fig
1
2
3
Fig. 3
Captive Center contact
Finish
yes
Gold
Retention
Smooth bore
Finish
Gold
JACK, SOLDER TYPE FOR SEMI-RIGID CABLES
Cable group
RG405
Cable group dia.
.085''
Part number
R201 223 700
Captive Center contact
yes
3-7
www.radiall.com
SMPM
RECEPTACLES
PCB STRAIGHT RECEPTACLES (with male center contact)
Fig. 1
Part number
R201 508 000
R201 508 700
R201 428 010
Fig
1
2
Retention
full detent
smooth bore
full detent
Fig. 2
Assembly instructions
M01
Finish
gold
Note
Packaging
surface mount
100 pieces
4 solder legs
Unit
PCB RECEPTACLE, EDGE CARD MOUNT (with male center contact)
Fig. 1
Part number
R201 423 100
R201 423 110
Fig
2
1
Retention
Fig. 2
Assembly instructions
full detent
M02
Finish
gold
Note
for 0.9mm PCB
Packaging
100 pieces
PANEL STRAIGHT HERMETIC RECEPTACLE, SOLDER MOUNT
(with male center contact)
Fig. 1
3-8
Part number
R201 645 000
R201 645 700
Fig
1
2
Fig. 2
Retention
full detent
smooth bore
www.radiall.com
Panel drilling
Finish
P02
gold
PANEL SHROUD, 2 HOLES FLANGE MOUNT (no center contact)
Part number
R201 450 001
R201 450 701
Note: we recommend to use Radiall glass
SMPM
PANEL SHROUND AND ADAPTERS
Retention
Panel drilling
Finish
Full detent
P01
passivated
Smooth bore
bead R280 760 050. Glass beads can be found in the tooling & accessories chapter
19-A of this catalog.
THREAD-IN RECEPTACLES (with male center contact)
Fig. 1
Part number
R201 561 021
R201 561 721
Fig
1
2
Retention
Full detent
Smooth bore
Fig. 2
Panel drilling
Finish
P03
passivated
IN SERIES ADAPTERS (female to female center contact)
Fig. 1
Part number
R201 705 000
R201 723 1_0
Fig
1
2
Dimension A
5.33 (.210)
Consult us
Fig. 2
Type
fixed length
Spring loaded
Finish
Gold
3-9
www.radiall.com
SMPM
adapters
BETWEEN SERIES ADAPTERS, DC-40 GHz
Part number
R191 562 000
R191 563 000
R191 564 000
R191 565 000
All adapters feature identical
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig
Description
1
SMPM male full detent / 2.4 MM male
2
SMPM female / 2.4 MM male
3
SMPM male full detent / 2.4 MM female
4
SMPM female / 2.4 MM female
electrical lengths.
Finish
Packaging
Gold
Unit
MEASUREMENT PCB WITH SMT FULL DETENT RECEPTACLES
Part number
Description
R201 999 000
Assembled with 2 x R201 508 000
Note: use SMPM specific extraction tools R282 918 200 or R282 918 210 to remove SMPM adapters or plugs connected to the PCB.
Tools description can be found in the tooling & accessories section 19-A of this catalog.
3-10
www.radiall.com
B
C
P01
1.8 - 1.9 (.071 - .075)
7.11 - 7.21 (.0280 - .284)
a
b
c
d
e
f
g
h
j
P02
3.36 - 3.38
3.03 - 3.15
2.27 - 2.29
1.63 - 1.73
0.79 - 0.83
4.52 - 4.56
0.13 - 0.17
0.28 - 0.38
3.15 - 3.19
SMPM
PANEL DRILLING
1. Degrease and clean connector and box.
2. Solder the connector on the panel. We advise using SnAg4 Cu0.5
and a low residue flux.
Preheating at 100°C is recommended. Take care not to exceed 260°C
during soldering operation.
3. Solder the pin on the track. We advise using SnAg4 Cu0.5 and a low
residue flux.
Preheating at 100°C is recommended for ceramic substrate. Take
care not to exceed 260°C during soldering operation.
a
b
P03
5.31 - 5.33
1.09 - 1.12
1. Degrease and clean connector and box.
2. Screw-on the connector on the panel.
3. Solder the pin on the track.
3-11
www.radiall.com
SMPM
ASSEMBLY INSTRUCTIONS
M01
Connectors
R201 508 000
R201 508 700
Valid for RT DUROID 5880 type PCB, thickness 0.254mm, with copper layer
35μm on both sides. Add via between both sides along upper ground
plane according to engineering practices.
M02
Connectors
R201 423 110
3-12
www.radiall.com