docMorin Series B Actuator
download 
Report Transcription
Morin Series B Actuator
Morin Series B Actuator Ductile Iron/Stainless Steel Quarter-turn Spring Return and Double Acting Actuators Output Torques to 238,000 lb.in. Features and Benefits • Ductile iron housing, piston and end caps provide long product life with durable, cost effective operation. • Cylinders of 316 stainless steel provide unrivaled corrosion resistance. ISO 9001 • Output shaft made of high strength alloy steel transmits torque without fatigue. • Sintered bronze bushings or sealed needle bearings on output shaft eliminate side loading of valve stem to maximize stem packing performance. • Chrome-plated steel piston rod provides strength and corrosion resistance for enduring high cycle applications. • Sintered bronze piston rod bushings provide low-friction support and precise alignment of the piston rod to increase efficiency, reduce maintenance and extend actuator life. • Heat-treated stainless steel thrust pin and rollers transfer piston force to 17-4PH stainless steel yoke by rolling to reduce friction, for longer life and more efficient torque transmission. • Teflon® guide bands ensure low-friction piston guidance during operation to protect cylinder walls from potential scoring and extend seal performance with a continuous cylinder wiping action. • Bi-directional travel stops provide accurate valve rotation adjustment. • ISO 5211 mounting pattern promotes easier valve adaption by utilizing internationally recognized standards. • Namur drive slot on output shaft enables accessory-driven components to maintain a compact, low profile assembly and eliminates the need for couplings. • Tectyl-coated springs can be disarmed without special tools to safely and easily disassemble the actuator in the field, reducing down time and providing a ‘man safe’ spring. • Easily removable housing cover provides effortless access for internal inspection of yoke mechanism. Technical Data Supply pressure : 40 to 160 psig (see torque charts) General Application Supply medium Designed for ‘on-off’ or modulating control of any quarter-turn ball, butterfly, rotary plug or damper style valve application. : Air or any gas compatible with materials of construction Temperature rating Standard range : -20°F to 210°F Optional range : -65°F to 300°F Angular rotation : 90 degrees ± 8 degrees Flow Control Teflon® is a registered trademark of E.I. duPont de Nemours & Company Total Flow Control Solutions™ Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023-US-0306 Morin Series B Actuator Materials of Construction Double Acting - Models 006 thru 100 18 13 24 37 36 25 29 30 7 27 35 31 10 2 3 5a 4 26 16 1 41 9 Double Acting - Models 135 thru 1150 4 24 1 16 9 37 36 25 30 29 7 5b 3 26 18 10 27 41 2 31 35 Note For readability, some item numbers have been excluded from drawings. Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 2 Morin Series B Actuator Materials of Construction Item 1 2 Housing Yoke 3 Output shaft (N/A on 1480 thru 2380) 4 Piston rod 5a Bushing-output shaft, Models 006 thru 100, 1480 thru 2380 5b Needle bearing, Models 135 thru 1150 Roll pin-yoke, 6a Models 006 thru 100 6b Key-yoke, Models 135 thru 1150 Material Material Standards Item Material Ductile Iron 17-4PH SS* A395 A564-630 21 Flat washer Steel, plated*** 22a C4140 Thrust washer, Models 135 thru 1150 SS Alloy steel, plated* Steel-chrome plated C1045 Sintered bronze 23 24 Seal-pointer, Models 1480 thru 2380 Cover gasket Cylinder Fiber 316 SS** A276 Alloy steel 25 26 Piston Adaptor Ductile iron Ductile iron A395 A395 Ductile iron Ductile iron A395 A395 Alloy steel 28b 18-8 SS 7 Sintered bronze 8b 9 10 12b Thrust pin Roller bearing 440C SS* 440C SS* Retaining ring-lower bearing, Models 135 thru 1150 Plug-thrust pin, Models 1480 thru 2380 13a Position indicator, Models 006 thru 100 13b Thrust plate, Models 135 thru 1150 12c 31 32 Brass Retaining ring-pin Set screw, 12a Models 006 thru 100 29 30 Steel, plated Breather-housing Models 1480 thru 2380 11 Lock washer Pointer 17 Round head screw Cover-housing, 18a Models 006 thru 1150 Drive-pointer, Models 1480 thru 2380 Hex head bolt, 19a Models 006 thru 1150 Seal-yoke, 19b Models 1480 thru 2380 Lock washer, 20a Models 006 thru 1150 18b 20b Adaptor-spring, Models 1480 thru 2380 Seal-piston rod Seal-piston bolt Seal-piston Adaptor-pointer, Models 1480 thru 2380 BUNA-N Ductile Iron BUNA-N BUNA-N BUNA-N Nylon 33 34 Piston bolt Lock washer Steel, plated*** Steel, plated*** 35 36 Bearing-piston Thread seal Teflon® EPDM/steel, plated*** Steel, plated*** 37 38 Travel stop bolt Jam nut Steel, plated*** Steel, plated*** Alloy steel 39 40 Socket head cap screw Lock washer Steel, plated*** Steel, plated*** Steel 41 43 Tie rod Lock washer Steel, plated*** Steel, plated*** 304 SS 44 45 Hex head bolt Thread seal Steel, plated*** BUNA-N 46 47 Seal-cylinder Nameplate label Lug label, BUNA-N Mylar Steel, plated Ductile iron 13c Cover, Models 1480 thru 2380 Ductile Iron 14 Hex head bolt Steel, plated*** 15 16 22b 27 End cap 28a Rod cover Steel, plated Screw-pointer drive, 6c Models 1480 thru 2380 Bushing-piston rod Retaining ring-shaft, 8a Models 006 thru 1150 Material Standards 48 Steel, plated*** Soft PVC Mylar 49 Models 1480 thru 2380 Cylinder-spring side Steel, plated 50 51 Tie rod-spring side Hex head bolts Steel, plated**** Steel, plated*** 18-8 SS 52 53 Adjusting bolt Flat washer Steel, plated*** Steel, plated*** Steel, plated*** 54 55 End cap-spring side Outer spring Ductile iron Spring steel BUNA-N 56 57 Inner spring Breather Spring steel Steel, plated*** Steel, plated*** 58 Spring label LEXAN® polycarbonate Steel, plated*** 316 SS** A276 A395 Retaining ring-pointer adaptor, Steel Models 1480 thru 2380 Notes * Heat treated ** Xylan coated carbon steel on Series C models *** 18-8 Stainless Steel on sizes 006 thru 100 **** 316 Stainless Steel on sizes 006 thru 100 Teflon® is a registered trademark of E.I. duPont de Nemours & Company. LEXAN® polycarbonate is a registered trademark of the General Electric Company. Actuator failure The most common cause of actuator failure is wear on the seals. If condensed water from air lines collects in an aluminum or steel cylinder, pitting will occur. Pitting will eventually destroy a seal and cause piston “blow by” and ultimate failure. Teflon® piston bearings come in contact with 316 stainless steel cylinders, a standard on all Series B Morin actuators. Lubrication is never required. All moving parts are supported with sintered bronze bushings or sealed needle bearings. Structural members including yoke, thrust pin and roller bearings are made from heat treated stainless steel. The Morin Actuator is designed to perform in the most demanding corrosive environments. This includes a “nice, clean, noncorrosive” plant with water in its air lines. Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 3 Morin Series B Actuator Principles of Construction and Scotch Yoke Torque Spring Designed for Safety Using ductile iron and stainless steel, the B becomes the standard for low cost valve actuation while providing high quality performance. All spring return models incorporate a ‘man safe’ spring design that allows the actuator to be safely assembled and disassembled in the field without the need for special tools. The integral tie rods are bored and tapped to provide a means of loading and unloading the spring in a safe and convenient manner. The actuator housing, end caps and piston are all machined from ductile iron castings. This produces a rugged, low cost product through reduced machining time and by eliminating wasteful excess material. Cylinders of 316 stainless steel provide the ultimate in corrosion resistance and increased piston seal performance while reducing maintenance costs. Any components that rotate or slide during operation, such as the high strength alloy steel plated output shaft, chrome-plated piston rod, stainless steel thrust pin or the ductile iron piston, are all supported by replaceable friction reducing bearings. NAMUR Drive Slot Each actuator is provided with a NAMUR drive slot for limit switches and positioners. This allows for simple direct mounting without the need for couplings. ISO 5211 Mounting To provide the greatest flexibility for valve adaptation, each model has a mounting pattern designed in accordance with International Organization for Standardization (ISO) requirements. Field Reversible Failure Mode On Models 006 through 100, the ‘openshut-open’ indicator plate allows the use of the same indicator and pointer when the failure mode needs to be reversed. When changing from ‘fail-close’ to ‘fail-open’ on spring return models, simply mount the stainless steel position indicator plate and pointer on the opposite side of the actuator. The position indicator plate and pointer can be mounted parallel or perpendicular to the actuator centerline. Bi-directional Travel Stops Adjustable stops on each end cap provide the flexibility of accurate valve rotation positioning at the end of the ‘open’ and ‘close’ stroke. Both stops are located on the cylinder centerline, the optimal position to maximize travel adjustment and eliminate any detrimental side loading on the travel stops. Adjustable from 82° to 98°. Scotch Yoke Torque Characteristics Standard Options Viton® is a registered trademark of E.I. duPont de Nemours & Company. Double Acting Air to Air Single Acting Spring Return 125 125 Spring Break 100 Air Break Break Torque 100 Spring Stroke Actual Torque Air Stroke 75 75 Torque Torque • Manual Jackscrew Override • Metric Mounting Threads • Viton® Seals • Low or High Temperature Seals • 40 through 160 psig Spring Sets • Full Stroke Travel Adjustment • Lock-out Device • Manual Handpump Override • Partial Stroke Test Device 50 Air End 25 0° Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. Spring End 45° Stroke Published Torque 50 Running Torque 25 90° MORMC-0023 4 0° 45° Stroke 90° Morin Series B Actuator Scotch Yoke Mechanics Stroke in degrees -5 0° 5 10 15 20 25 30 35 40 45° 50 55 60 65 70 75 80 85 90° 95 X Piston rod stroke A Moment arm minimum (X) at mid stroke (45°) Y } Moment arm maximum (Y) at end of stroke (90°) Normal 90° stroke 100° stroke For max. moment arm at any stroke position multiply min. moment by secant X = Min. moment arm Y = Max. moment arm Conclusion: Greatest Torque Output is at Beginning and End of Stroke-Where it’s Needed! A Output Torques Output torques (lb.in.) double acting - air to air Actuator Model 006 015 023 036 050 059 072 100 135 210 270 345 370 420 575 740 945 1150 1480 1930 2380 40 50 60 70 Air Supply (psig) 80 90 100 Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum Start / End Minimum 300 235 750 590 1150 855 1980 1370 2500 1840 2950 2210 3960 2740 5000 3680 7088 5250 11550 8160 14175 10500 18113 13415 19795 13080 21000 16320 31913 22440 38850 26160 50558 36390 60375 44880 74000 46621 96500 61060 375 290 935 735 1450 1070 2475 1710 3125 2300 3688 2763 4950 3425 6250 4600 8862 6565 14438 10200 17719 13125 22641 16769 24744 16350 26250 20400 39849 28050 48563 32700 63197 45488 75469 56100 92500 58276 120625 76325 450 350 1125 885 1725 1285 2970 2055 3750 2760 4425 3315 5940 4110 7500 5520 10631 7875 17325 12240 21263 15750 27169 20123 29693 19620 31500 24480 47869 33660 58275 39240 75836 54585 90563 67320 111000 69931 144750 91590 525 405 1310 1030 2010 1500 3465 2400 4375 3220 5163 3868 6930 4790 8750 6440 12406 9185 20213 14280 24806 18375 31697 23476 34641 22890 36750 28560 55833 39270 67988 45780 88476 63683 105656 78540 129500 81586 168875 106854 600 460 1500 1180 2300 1710 3960 2740 5000 3680 5900 4420 7920 5480 10000 7360 14175 10500 23100 16320 28350 21000 36225 26830 39590 26160 42000 32640 63825 44880 77700 52320 101115 72780 120750 89760 148000 93242 193000 122120 Start / End Minimum 119000 75506 148750 94383 178500 113259 208250 132136 238000 151013 675 750 520 575 1685 1875 1325 1475 2585 2875 1925 2140 4455 4950 3080 3425 5630 6250 4140 4600 6638 7375 4973 5525 8910 9900 6160 6850 — — — — 15950 17724 11810 13125 25988 28875 18360 20400 31894 35438 23625 26250 40754 45281 30184 33538 44539 49488 29430 32700 — — — — 71806 79781 50490 56100 87413 97125 58860 65400 113755 — 81878 — — — — — 166500 185000 104897 116552 217125 — 137385 — — — — — 110 150 160 825 900 975 1050 1125 640 690 750 810 870 — — — — — — — — — — 3160 3450 3740 4020 4300 2350 2570 2780 3000 3210 5445 5940 6435 6930 7425 3770 4110 4450 4800 5140 6875 7500 8125 8750 9375 5060 5520 5980 6440 6900 8113 8850 9587 –– –– 6078 6630 7183 –– –– 10780 11880 MAXIMUM OPERATING 7540 8220 PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 100 psi 19488 21263 23037 24812 26576 14440 15750 17060 18375 19690 31763 34650 37538 40425 43313 22440 24480 26520 28560 30600 38981 42525 –– –– –– 28875 31500 –– –– –– — — MAXIMUM OPERATING — — PRESSURE = 120 psi 54436 59385 64334 69283 74231 35970 39240 42510 45780 49050 — — — — — — — — — — 87757 95738 103718 111694 119669 61710 67320 72930 78540 84150 106838 116550 MAXIMUM OPERATING 71940 78480 PRESSURE = 120 psi — — MAXIMUM OPERATING — — PRESSURE = 120 psi — — MAXIMUM OPERATING — — PRESSURE = 120 psi 203500 222000 MAXIMUM OPERATING 128207 139862 PRESSURE = 120 psi — — MAXIMUM OPERATING — — PRESSURE = 120 psi 1200 940 — — 4600 3420 7920 5480 10000 7360 –– –– — — 120 — — 130 140 28350 21000 46200 32640 –– –– 79180 52320 — — 127650 89760 MAXIMUM OPERATING PRESSURE = 120 psi Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 5 Morin Series B Actuator Output Torques Output torques (lb.in.) single acting - spring return Actuator Model 006 015 023 036 046 058 059 072 100 135 210 270 344 345 370 420 575 740 944 945 1150 1480 1929 1930 2380 Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End Start Minimum End 40 50 60 70 80 195 99 110 485 234 260 750 360 400 1170 567 630 1500 720 800 1870 905 1005 — — — 2340 1134 1260 3250 1575 1750 4390 2554 2838 6825 3639 4043 8780 4683 5203 10970 5686 6318 — — — 12025 6701 7446 13650 6946 7718 18690 9507 10563 24050 13404 14893 30060 15591 17323 — — — 37375 19018 21131 48100 23310 25900 72150 34965 38850 — — — 77350 37485 41650 245 123 137 605 293 325 945 459 510 1460 711 790 1870 905 1005 2250 1080 1200 — — — 2925 1418 1575 4060 1971 2190 5485 3186 3540 8530 4544 5049 10970 5846 6496 13160 6827 7586 — — — 15030 9403 10448 17060 8685 9650 23360 11888 13209 30060 16757 18619 36075 18707 20785 — — — 46720 23767 26408 60125 29138 32375 84175 40793 45325 — — — 96688 46857 52063 290 151 168 730 351 390 1125 540 600 1755 855 950 2250 1080 1200 2615 1269 1410 — — — 3510 1701 1890 4880 2358 2620 6580 3829 4254 10240 5455 6061 13160 7019 7799 15355 7964 8849 — — — 18040 10050 11167 20475 10418 11576 28030 14261 15845 36075 20105 22339 42090 21821 24246 — — — 56060 28530 31700 72150 34965 38850 84175 40793 45325 — — — 116025 56228 62475 340 175 194 850 410 455 1305 635 705 2050 990 1100 2615 1269 1410 3000 1440 1600 — — — 4095 1985 2205 5690 2754 3060 7680 4466 4962 11940 6366 7073 15355 8187 9097 19746 10236 11373 — — — 21045 11727 13030 23890 12153 13503 32700 16642 18491 42090 23453 26059 48100 24942 27713 — — — 65400 33283 36981 84175 40712 45235 108225 52448 58275 — — — 135363 65599 72888 390 199 221 970 473 525 1500 720 800 2340 1134 1260 3000 1440 1600 — — — 3510 1701 1890 4700 2250 2500 6500 3150 3500 8775 5103 5670 13650 7277 8085 17550 9356 10395 21940 11373 12637 — — — 24050 13404 14893 27300 13892 15435 37375 19018 21131 48100 26807 29785 — — — 56060 29073 32303 74750 38037 42263 96200 46620 51800 — — — 116025 56228 62475 154700 74970 83300 Air Supply (psig) 90 100 110 — — — — — — 1680 815 905 2630 1274 1415 — — — — — — 4095 1985 2205 — — — — — — 9875 5740 6378 15350 8187 9097 19746 10524 11693 — — — 23890 12384 13760 27055 15080 16756 30705 15630 17367 42045 21390 23767 54108 30163 33514 — — — 65400 33917 37685 84090 42790 47544 108225 52448 58275 — — — 135363 65599 72888 174038 84342 93713 — — — — — — 1870 905 1005 2925 1418 1575 — — — — — — 4700 2250 2500 — — — — — — 10970 6377 7086 17060 9098 10109 21940 11693 12992 — — — 27300 14156 15729 30060 16757 18619 34120 17369 19299 46720 23767 26408 60120 33514 37238 — — — 74750 38761 43068 93440 47534 52815 120250 58275 64750 — — — 154700 74970 83300 193375 93713 104125 — — — — — — — — — — — — — — — — — — — — — 120 130 140 150 160 — — — — — — 2250 1080 1200 3510 1701 1890 — — — — — — — — — — — — — — — — — — — — — — — — — — — 2615 1269 1410 4095 1985 2205 — — — — — — — — — — — — — — — — — — 3000 1440 1600 4700 2250 2500 MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 100 psi MAXIMUM OPERATING PRESSURE = 100 psi — — — — — — — — — — — — 30705 15928 17698 — — — — — — — — — — — — — — — 84090 43605 48450 — — — — — — — — — 154700 74970 83300 — — — 13160 7657 8508 20475 10915 12128 — — — — — — 30705 15928 17698 36075 20105 22339 — — — 56060 28530 31700 — — — — — — 84090 43605 48450 — — — — — — — — — 193375 93713 104125 — — — Torque shown is balanced (i.e. spring ending = air ending torque). See Bulletin No. MUTC-0702 for unbalanced torque output. Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MAXIMUM OPERATING PRESSURE = 120 psi MORMC-0023 6 — — — — — — — — — 15355 8932 9924 23890 12731 14146 — — — — — — — — — — — — 17550 10206 11340 27300 14553 16170 — — — MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi — — — — — — — — — 42090 23453 26059 — — — 65400 33283 36981 — — — — — — — — — MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi 48100 26807 29785 — — — 74750 38037 42263 Morin Series B Actuator Mechanical Data Mechanical data Notes 1. Air Consumption: Cubic inches shown in chart represent actual free air volume in cylinder between piston and end cap when furthest apart. Air consumption will vary depending on supply pressure. To determine standard cubic feet per minute use the following formula: SCFM = (_____)(______________)( Vol. in3 Supply Air psig + 14.7 1728 14.7 ) Strokes/Minute Example: Calculate SCFM for Model 023 double acting using 80 psig air supply and 5 strokes/minute. SCFM = ( )( 52 _____ 1728 )( ) 80 +14.7 ________ 14.7 5 SCFM = 0.97 2. Cycle times shown represent average time to stroke 90 degrees using standard pilot valves and should be used as a guide only. Cycle times can be increased or decreased dramatically by using speed controls, oversized pilot valves or quick exhaust valves. Actuator Model Number of Pistons Double Acting Cylinder Bore (inch) Stroke (inch) Volume1 Cubic In 95° Stroke Cycle Time2 Seconds 90° Stroke Weight (lbs.) 006 015 023 036 050 059 072 100 135 210 270 345 370 420 575 740 945 1150 1480 1930 1 1 1 1 1 2 2 2 1 1 2 2 1 2 1 2 2 2 2 2 2.750 4.375 4.375 5.438 6.250 4.375/5.438 5.438 6.250 8.250 10.250 8.250 8.250/10.250 12.250 10.250 15.500 12.250 12.250/15.500 15.500 12.250 12.250/15.500 2 2 3 3 3 3 3 3 5 5 5 5 6 5 6 6 6 6 12 12 14 35 52 78 104 130 156 215 294 412 588 706 780 825 1132 1560 1912 2263 2986 3884 0.5 1.0 1.0 1.5 2.2 2.4 2.5 3.0 4.5 5.0 6.0 7.0 8.0 8.5 9.5 10.0 11.0 12.0 20.0 22.0 11 14 30 33 39 36 41 49 165 185 210 234 390 257 519 530 653 775 850 950 2380 2 15.500 12 4781 24.0 1050 006 015 023 036 046 058 059 072 100 135 210 270 344 345 370 420 575 740 944 945 1150 1480 1929 1930 1 1 1 1 2 2 2 2 2 1 1 2 2 2 1 2 1 2 2 2 2 2 2 2 2.750 4.375 4.375 5.438 4.375 5.438/4.375 4.375/5.438 5.438 6.250 8.250 10.250 8.250 10.250/8.250 8.250/10.250 12.250 10.250 15.500 12.250 15.500/12.250 12.250/15.500 15.500 12.250 15.500/12.250 12.250/15.500 2 2 3 3 3 3 3 3 3 5 5 5 5 5 6 5 6 6 6 6 6 12 12 12 14 35 52 78 104 130 130 156 215 294 412 588 706 706 780 825 1132 1560 1912 1912 2263 2986 3884 3884 0.5 1.0 1.0 1.5 2.0 2.3 2.3 2.5 3.0 4.5 5.0 6.0 7.0 7.0 8.0 8.5 9.5 10.0 11.0 11.0 12.0 20.0 22.0 22.0 13 20 38 46 47 54 54 60 68 210 235 250 315 315 540 379 779 660 871 871 1082 1650 1750 1750 2380 2 15.500 12 4781 24.0 1850 Spring Return How to Order 1. Double Acting example: Air supply: 80 psig Break torque: 7,200 lb.in. B-072U-D000 B: Series 072: Model number U: UNC mounting threads D000: Double acting 2. Spring Return example: Air supply: 80 psig Ending torque: 12,950 lb.in. Fail rotation: Clockwise B-370U-S080 B: Series 370: Model number U: UNC mounting threads S080: Spring set 3. For all spring return models: • Use air pressure to determine spring set. • All spring sets ending with ‘0’ fail clockwise (40, 50, 60, etc.). Typical Section Double Acting/One Piston • All spring sets ending with ‘1’ fail counterclockwise (41, 51, 61, etc.). Typical Section Spring Return/Two Pistons Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 7 Morin Series B Actuator Dimensions Models 046, 058, 059, 072 and 100 1.25 Typical A B C 1 (sq) C 2 (sq) G H Diameter P NPT Typical E Models 006, 015, 023, 036 and 050 D 1.25 Typical A B M J K L F (dia) C 1 (sq) G H Diameter Notes 1. Shown without pointer for clarity. 2. For mounting dimensions, refer to page 9. Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 8 P NPT Typical Morin Series B Actuator Dimensions (inches), Double Acting Model A B C1 C2 D E F G H J K L M P 006DA 12.87 5.28 3.18 — 3.87 — 1.09 0.18 1.50 1.50 3.00 4.75 1.31 1/8 015DA 12.31 5.28 4.81 — 4.81 — 1.09 1.00 1.50 1.50 3.00 4.75 1.31 1/4 023DA 18.44 8.88 4.81 — 6.16 — 1.75 0.25 1.75 2.16 4.31 6.69 2.25 1/4 036DA 18.44 8.88 5.81 — 6.66 — 1.75 0.75 1.75 2.16 4.31 6.69 2.25 1/4 050DA 18.37 8.88 7.12 — 7.31 — 1.75 1.38 1.75 2.16 4.31 6.69 2.25 1/4 059DA 19.12 9.56 4.81 5.81 6.66 6.34 — 0.75 1.75 2.16 4.31 6.69 2.25 1/4 072DA 100DA 19.12 18.98 9.56 9.49 5.81 7.12 5.81 7.12 6.66 7.31 6.38 6.38 — — 0.75 1.38 1.75 1.75 2.16 2.16 4.31 4.31 6.69 6.69 2.25 2.25 1/4 1/4 Dimensions (inches), Spring Return Model A B C1 C2 D E F G H J K L M P 006SR 12.87 5.28 3.18 — 3.87 — 1.09 0.18 1.50 1.50 3.00 4.75 1.31 1/8 015SR 14.50 5.28 4.81 — 4.81 — 1.09 1.00 1.50 1.50 3.00 4.75 1.31 1/4 023SR 21.95 8.88 4.81 — 6.16 — 1.75 0.25 1.75 2.16 4.31 6.69 2.25 1/4 036SR 23.31 8.88 5.81 — 6.66 — 1.75 0.75 1.75 2.16 4.31 6.69 2.25 1/4 046SR 22.63 9.56 4.81 4.81 6.16 5.58 — 0.25 1.75 2.16 4.31 6.69 2.25 1/4 058SR 22.63 9.56 5.81 4.81 6.66 5.58 — 0.75 1.75 2.16 4.31 6.69 2.25 1/4 059SR 23.99 9.56 4.81 5.81 6.66 5.44 — 0.75 1.75 2.16 4.31 6.69 2.25 1/4 072SR 23.99 9.56 5.81 5.81 6.66 5.44 — 0.75 1.75 2.16 4.31 6.69 2.25 1/4 100SR 24.27 9.49 7.12 7.12 7.31 5.44 — 1.38 1.75 2.16 4.31 6.69 2.25 1/4 Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 9 Morin Series B Actuator Dimensions Models 270, 344, 345, 420, 740, 944, 945 and 1150 A B Q Typical C 1 (sq) C 2 (sq) G P NPT Typical H Diameter E Models 135, 210, 370 and 575 D A M Q Typical B J K C 1 (sq) F Diameter L G P NPT Typical H Diameter Models 1480, 1929, 1930 and 2380 A D B M Q Typical J K C 1 (sq) C 2 (sq) G E Notes 1. Shown without pointer for clarity. 2. For mounting dimensions, refer to page 11. Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 10 P NPT Typical Morin Series B Actuator Dimensions (inches), Double Acting A B C1 C2 D E F G H J K 135DA 32.08 15.31 9.50 — 10.44 — 2.75 1.00 — 4.38 8.13 11.82 3.19 3/8 1.75 210DA 32.43 15.31 11.50 — 11.44 — 2.75 2.00 — 4.38 8.13 11.82 3.19 1/2 2.12 270DA 33.54 16.77 9.50 9.50 10.44 11.72 — 1.00 — 4.38 8.13 11.82 3.19 1/2 1.75 345DA 33.89 16.77 9.50 11.50 11.44 11.22 — 2.00 — 4.38 8.13 11.82 3.19 1/2 2.12 1.75 Model L M P Q 370DA 41.10 19.56 13.50 — 16.75 — 3.50 2.69 5.90 5.44 9.50 14.81 6.88 1/2 420DA 34.24 17.12 11.50 11.50 11.44 11.22 — 2.00 — 4.38 8.13 11.82 3.19 1/2 2.12 575DA 41.69 19.56 17.00 — 18.50 — 3.50 4.44 5.90 5.44 9.50 14.81 6.88 3/4 2.50 1.75 740DA 43.08 21.54 13.50 13.50 16.75 15.62 — 2.69 5.90 5.44 9.50 14.81 6.88 1/2 945DA 43.67 21.54 13.50 17.00 18.50 14.88 — 4.44 5.90 5.44 9.50 14.81 6.88 3/4 2.50 1150DA 44.26 22.13 17.00 17.00 18.50 14.88 — 4.44 5.90 5.44 9.50 14.81 6.88 3/4 2.50 2.50 1480DA 70.57 35.85 13.50 13.50 21.57 25.90 — 0.63 — 7.06 13.38 — 7.58 1/2 1930DA 71.11 35.85 13.50 17.00 22.08 25.06 — 2.19 — 7.06 13.38 — 7.58 3/4 3.05 2380DA 71.63 36.37 17.00 17.00 22.08 25.06 — 2.19 — 7.06 13.38 — 7.58 3/4 3.05 E H Dimensions (inches), Spring Return Model A B C1 C2 D 135SR 38.89 15.31 9.50 — 10.44 F G J K — 2.75 1.00 — 4.38 8.13 11.82 L 3.19 M 3/8 P 1.75 Q 210SR 42.10 15.31 11.50 — 11.44 — 2.75 2.00 — 4.38 8.13 11.82 3.19 1/2 2.12 270SR 40.35 16.77 9.50 9.50 10.44 10.18 — 1.00 — 4.38 8.13 11.82 3.19 3/8 1.75 344SR 40.70 17.12 11.50 9.50 11.44 10.18 — 2.00 — 4.38 8.13 11.82 3.19 1/2 2.12 2.12 345SR 43.56 16.77 9.50 11.50 11.44 9.50 — 2.00 — 4.38 8.13 11.82 3.19 1/2 370SR 51.48 19.56 13.50 — 16.75 — 3.50 2.69 5.90 5.44 9.50 14.81 6.88 1/2 1.75 420SR 43.91 17.12 11.50 11.50 11.44 9.50 — 2.00 — 4.38 8.13 11.82 3.19 1/2 2.12 575SR 54.12 19.56 17.00 — 18.50 — 3.50 4.44 5.90 5.44 9.50 14.81 6.88 3/4 2.50 740SR 53.46 21.54 13.50 13.50 16.75 13.88 — 2.69 5.90 5.44 9.50 14.81 6.88 1/2 1.75 944SR 54.05 22.13 17.00 13.50 18.50 13.88 — 4.44 5.90 5.44 9.50 14.81 6.88 3/4 2.50 945SR 56.10 21.54 13.50 17.00 18.50 12.70 — 4.44 5.90 5.44 9.50 14.81 6.88 3/4 2.50 1150SR 56.69 22.13 17.00 17.00 18.50 12.70 — 4.44 5.90 5.44 9.50 14.81 6.88 3/4 2.50 1480SR 86.98 35.85 13.50 13.50 21.57 24.46 — 0.63 — 7.06 13.38 — 7.58 1/2 2.50 1929SR 87.50 36.37 17.00 13.50 22.08 24.46 — 2.19 — 7.06 13.38 — 7.58 3/4 3.05 3.05 3.05 1930SR 87.52 35.85 13.50 17.00 22.08 23.00 — 2.19 — 7.06 13.38 — 7.58 3/4 2380SR 88.04 36.37 17.00 17.00 22.08 23.00 — 2.19 — 7.06 13.38 — 7.58 3/4 Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 11 Morin Series B Actuator Mounting Details Models 006 and 015 - Top and bottom of housing (symmetrical) ISO 5211-F07 0.748/0.745 square 5/16 - 18 UNC* Tap x 0.62 Deep on 2.76 Diameter Bolt Circle A 0.68 0.87 0.157/0.160 wide 0.197/0.205 deep Drive Slot Namur Drive Both Ends A 0.251 C’Bore x 0.209 Deep M6 Tap x 1/2” Deep Section A - A Models 023 through 100 - Top and bottom of housing (symmetrical) ISO 5211-F12 0.998/0.995 square 1/2 - 13 UNC** Tap x 0.65 Deep on 4.92 Diameter Bolt Circle B 0.94 M5 x 0.80 Tap 3/8 Deep (4) Places on Namur Pattern 1.18” x 3.149” Rectangle 1.18 0.157/0.160 wide 0.197/0.205 deep Drive Slot Namur Drive Both Ends B 0.251 C’Bore x 0.209 Deep M6 Tap x 1/2” Deep Section B - B Models 135, 210, 270, 344, 345 and 420 - Bottom of housing ISO 5211-F16 3⁄4 - 10 UNC*** Tap x 1.18 Deep (4) Places as Shown on 6.50 Diameter Bolt Circle C 1.18 3.69 2.000/1.994 Diameter Shaft 1/2 sq. x 3.19 Long Keyway C Section C - C Models 135, 210, 270, 344, 345 and 420 - Top of housing - Mounting details 3.68 0.251 C’Bore x 0.209 Deep M6 Tap x 1/2” Deep Metric thread option 10 - 32 UNF**** Tap x 0.875 Deep (4) Places on Keystone Pattern Metric Tap SHUT Namur Adapter OPEN OPEN M5 x 0.80 Tap x 3/8 Deep (4) Places on Namur Pattern 1.181 x 3.149 Rectangle *M8 **M12 ***M20 ****M5 1.61 SHUT 0.996/0.993 square 006 and 015 023 thru 100 135 thru 1150 135 thru 1150 Replace ‘U’ with ‘M’ in order number designation (refer to page 7). 1.18 0.157/0.160 wide x 0.197/0.205 Deep Namur Accessory Drive Slot Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. Model Number MORMC-0023 12 Morin Series B Actuator Mounting Details Models 370, 575, 740, 944, 945 and 1150 - Bottom of housing ISO 5211-F30 3⁄4 - 10 UNC** Tap x 1.18 Deep (8) Places as Shown on 11.73 Diameter Bolt Circle D 3.000/2.994 Diameter Shaft 3/4 sq. x 3.56 Long Keyway 5.31 1.18 4.56 22.5* Typ. D Section D - D Models 370, 575, 740, 944, 945 and 1150 - Top of housing - Mounting details 10 - 32 UNF**** Tap x 0.875 Deep (4) Places on Keystone Pattern 3.68 0.251 C’Bore x 0.209 Deep M6 Tap x 1/2” Deep SHUT Namur Adapter 1.61 OPEN OPEN M5 x 0.80 Tap x 3/8 Deep (4) Places on Namur Pattern 1.181 x 5.118 Rectangle 0.197 0.205 SHUT 0.996/0.993 square 1.18 0.157/0.160 wide x 0.197/0.205 Deep Namur Accessory Drive Slot Models 1480, 1929, 1930 and 2380 - Bottom of housing ISO 5211-F35 Female Drive 6.250 Dia. Bore x 11” Deep 1.501 Rectangular Keyway with 0.12 Radius Inside Keyway Corners 45° E 1 - 8 UNC*** Tap x 13⁄4 Deep (8) Places as Shown on 14.02 Diameter Bolt Circle 1.18 E Section E - E Models 1480, 1929, 1930 and 2380 - Top of housing - mounting details 3.68 Metric thread option 0.251 C’Bore x 0.209 Deep M6 Tap x 1/2” Deep M5 x 0.80 Tap 3/8 Deep (4) Places on Namur Pattern 1.181 x 3.149 Rectangle Namur Adapter 1.61 0.197 0.205 0.996/0.993 square 0.157/0.160 Wide x 0.197/0.205 Deep Namur Accessory Drive Slot 1.18 Metric Tap **M20 ***M24 ****M5 Model Number 370 and 575 thru 1150 1480 and 2380 370 and 575 thru 1150 Replace ‘U’ with ‘M’ in order number designation (refer to page 7). Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 13 Morin Series B Actuator Options Manual Options To provide the actuation package best suited for your application, the Morin line offers a full range of manual accessories. Partial Stroke Test Device (PSTD) Provides a method of testing ESD packages without shutdown. AWWA Tested per American Waterworks Association C504. Available for pneumatic or water service operation. Lockout Jackscrew Override (JSO) Hydraulic Override (MHP) Integral lockout allows safe shutdowns for maintenance and isolation of systems. Manual operation when power is lost. Simple and effective. Manual operation when power is lost. Includes speed controls. Direct Mounting Cast Adapters Full Stroke Adjuster Epoxy Painting (EX) Provides mechanical control of maximum and/or minimum valve stroke. Offshore rated, three-part coating system for high level of environmental protection. Many valve top works covered, including some ISO mounting. Assures economic but correct mounting alignment. + °F/°C – Proximity Switch Preparation High or Low Temperature Ratings Allows installation of cartridge style proximity switches. Leaves top works open for mounting of other devices. Standard rating of -20°F to 210°F [-29°C to 99°C] covers most applications. Optional ratings down to -65°F [-54°C] and up to 300°F [149°C]. Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 14 Morin Series B Actuator Accessories AVID Control Accessories Tyco Valves & Controls has a complete range of control accessories available, for integration for the Morin Series B actuators to achieve complete process control, from simple on/off solenoid valve control to integrated Network systems. Solenoid Valves A comprehensive range of solenoid valves is available for controlling the pneumatic supply to the actuator cylinder by means of an electrical signal. Alternative specifications of solenoid valves include: Weatherproof to NEMA 4, 4X Explosion proof to NEMA 4, 7, 9 Intrinsically safe to Class I A, B, C, D, Class II E, F G, Div. 1 and 2 ZR Plus Position Monitors AVID® Position Monitors The AVID range of Position Monitoring equipment offers models for all service classifications, each model incorporating numerous user-friendly features, including HiVue® Local Visual Display, EasiFix® Switch Adjustment and ModMount® Assembly facilities. EaziCal Positioners AVID Analog Positioners The AVID range of Control Positioners offers a variety of solutions to the precise positioning of rotary and linear pneumatic actuators. These positioners are suitable for use with either double acting and spring return actuators, and are mounted to the actuator housing either directly with ModMount or NAMUR (VDI/VDE 3845) standards. These units also provide the simplest form of installation and calibration as standard, without the requirement for additional equipment. Network Solutions Using the extensive resources of the AVID product range, Tyco Valves & Controls is able to provide actuated valve packages, capable of integration within field communications networks and interfacing with the major Network protocols currently in use throughout process industries. The AVID range on PlantNet® Monitors facilitates communication with AS-Interface, DeviceNet and Profibus Network Protocols to enable complete system integration of all valve units. Other protocols available on request. Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 15 Morin Series B Actuator Also Available The S Actuator (All Stainless) 316 Stainless Steel 316 Stainless Steel Setting an unrivaled standard in actuation at a price unexpectedly low for stainless steel. • To 160 psig pressure rating • Double acting break torques to 238,000 lb.in. • Spring end torques to 104,125 lb.in. For additional information, refer to Publication MORMC-0024. Teflon® 316 Stainless Steel Glass Filled Teflon® 17-4 PH Stainless Steel 18-8 Stainless Steel The B-HP Actuator High pressure actuation with stainless steel cylinders for superior corrosion resistance. • 1500 psig pressure rating • Double acting torques to 238,000 lb.in. • Spring end torques to 104,125 lb.in. For additional information, refer to Publication M7BP-3-00. Facility Phone: 205-663-0533 Tyco Valves & Controls www.tycovalves.com The data presented in this bulletin is for general information only. Manufacturer is not responsible for acceptability of these products in relation to system requirements. Patents and Patents Pending in U.S. and foreign countries. All rights reserved. Printed in U.S.A. Tyco reserves the right to change product design and specifications without notice. © Copyright 2003. Tyco reserves the right to change product design and specifications without notice. Copyright © 2003 by Tyco International Ltd. MORMC-0023 16
