Customs-Planet

Transcription

Customs-Planet

15
882
SECTION
15
WINDSHIELDS
0701-0126
TOURING
Side profile
LUGGAGE
SEATS &
SISSY BARS
GAS TANKS FOR DRESSERS
•Now available in 171/2” or
201/2” widths
•One-piece tanks feature a 3” stretch
•Curved bottom for a custom look
•Includes a raw dash panel that
0701-0190
replaces the existing dash
•Factory sealed powder coat primer
on the inside of tanks
•03-07 style fuel-injected tank
accepts the stock OEM fuel-pump
assembly and uses a L96-09
vented gas cap
•96-06 style carb tanks include a filler plate/neck assembly; use a L96-09 vented gas cap
•Tanks have an approximate 6-gallon capacity
•Tanks fit with RWD Profile (0804-0247) and ProTour (0804-0248) Seats, sold separately, see page 132
•Made in the U.S.A.
EXHAUST
0701-0127
ENGINE
Side profile
TRANSMISSION
& DRIVELINE
NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
FOR 96-07 FLTR/FLHT/FLHX MODELS
FOR 96-07 FLHR MODELS
1
1
0701-0126
03-07 style fuel-injected gas tank (201/2”)
$1,186.95 0701-0189
0701-0127
96-06 style carb gas tank (201/2”)
1,229.95 0701-0190
0701-03181
1,186.95 0701-03201
0701-0319
1,229.95 0701-0321
1
FUEL/AIR
SYSTEMS
SUG. RETAIL
$1,229.95
1,229.95
1,229.95
1,229.95
Uses a L96-08 vented gas cap.
1914-0009
GASKETS
& SEALS
ELECTRICAL
LIGHTING
1914-0009
0701-0110
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
0701-0110
Side profile
BRAKES
0701-0114
Side profile
TANKS &
OIL FILTERS
0701-0114
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
SMOOTH-TOP GAS TANKS
•Custom tanks for custom builders
•One-piece, single-cap design
•Handcrafted from 14- and 16-gauge steel
•Requires the use of an L96-09 vented gas cap and 22mm petcock
•Required mount kits may be used on any custom application
NOTE: Not for use on fuel-injected models.
PART #
DESCRIPTION
CUSTOM TANK FOR 00-06 SOFTAIL
1914-00091 211/4” L x 151/2” W, (approx. 4.5 gal.)
CHOPPER-STYLE TANKS
0701-0110 Short, curved bottom, 233/4” L x 121/2” W
UNIVERSAL TANKS
0701-0114 5” tear-drop, std. mount 28” L x 16” W
0701-0115 5” tear-drop, recessed mount 25” L x 16” W
FOOTRESTS
& LICENSE
PLATE FRAMES
0704-0001
0704-0002
SUG. RETAIL
$799.95
953.95
868.95
1,129.95
PART #
DESCRIPTION
SUG. RETAIL
UNIVERSAL TANKS (CONT)
0701-0117 5” tear-drop narrow, recessed mount 25” L x 14” W $1,078.95
TANK MOUNTS
0704-0001 Frame mount kit
39.95
0704-0002 Recessed mount kit
71.95
1
Requires the relocation of gauges, indicator lights and ignition switch;
FXSTD will require the use of a custom seat.
WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE
being painted to eliminate potential problems.
All part numbers in BOLD MAGENTA are new for 2009.
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
883
SECTION
15
0701-0382
Gas It fuel
injetion kit
WINDSHIELDS
0502-0256
0701-0381
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
VINTAGE GAS TANKS
•Add a period-style bobber tank to your Softail
•Steel gas tank inspired by the Softail
conversion Roland Sands Designs created
0701-0315
and dubbed El Borracho
•Available for carbureted or fuel-injected models
•Fuel-injected tank includes a RSD “Gas It” fuel injection kit that install with simple hand tools and no fabrication is required
•Tanks rest on a clever steel backbone cover that hides the OEM wiring and holds stock ignition switch to deliver a clean look
•Holds three gallons of fuel
•Roland Sands Design gas caps sold separately; see page 892
•Matching seat kit, rear fender kit and handlebars also sold separately
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
FOR 01-09 SOFTAIL MODELS W/ FUEL INJECTION
FOR 00-06 SOFTAIL W/ CARB (CONT)
0701-0382 Gas tank kit (tank and cover, with “Gas It” kit)
$1,761.95 0701-0315 Gas tank only
FOR 00-06 SOFTAIL W/ CARB
0502-0256 Backbone cover only
0701-0381 Gas tank kit (tank and cover)
1,199.95
$1,099.95
246.95
0701-0383
0701-0192
TRANSMISSION
& DRIVELINE
SUG. RETAIL
GASKETS
& SEALS
0701-0384
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
D-2 GAS
TANKS
0701-0193
•Made with
16-gauge steel
•Works with most
Pro-Street or
Chopper frames
•Comes with
recessed mounts
and pop-up cap
NOTE: Not for use on fuelinjected models.
PART #
DESCRIPTION
0701-0192
27” L
T-BOLT GAS TANKS
•Made from heavy-gauge steel
•Features pop-up gas cap and recessed mounts
SUG. RETAIL
$1,369.95
PART #
0701-0193
DESCRIPTION
31” L
SUG. RETAIL
$1,369.95
PART #
0701-0383
0701-0384
DESCRIPTION
27” L
31” L
SUG. RETAIL
$1,369.95
1,369.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
884
0701-0183
0701-0184
CUSTOM GAS TANKS
•Three types to choose from
•Narrow Mustang type features a single cap,
two petcock outlets, straight mounting tabs
and a hole-to-hole center line on mounting
brackets of 171/2”
•Extra Wide Mustang type features a high tunnel for the “Fatbob” look, one left side
petcock outlet and a hole-to-hole center line on mounting brackets of 1711/16”
•1-Piece Fatbob style features a left side external petcock outlet, indent on tank bottom
for rocker box clearance and a hole-to-hole center line on mounting brackets of 193/4”
NOTE: Not for use on fuel-injected models.
NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings.
PART #
DESCRIPTION
NARROW MUSTANG TYPE (161/2” L X 9” W X 7” D; TUNNEL MEASURES 21/2” W X 21/4” D)
0701-0183
2.2 gal. tank
EXTRA WIDE MUSTANG TYPE (161/2” L X 12” W X 7” D; TUNNEL MEASURES 21/2” W X 5” D)
0701-0184
3 gal. tank
1-PIECE FATBOB STYLE (191/2” L X 13” W X 8” D; TUNNEL MEASURES 23/16” W X 41/4” D)
0701-01851
4.75 gal. tank
1
0701-0185
NOTE: All tanks are pressure-tested and are bare metal;
fit before painting.
SUG. RETAIL
$150.95
150.95
165.95
Will not work on any stock FXR or FLT.
SECTION
15
WINDSHIELDS
TOURING
1914-1863
LUGGAGE
1914-1813
SEATS &
SISSY BARS
0701-0167
Side profile
EXHAUST
Side profile
FUEL/AIR
SYSTEMS
Side profile
ONE-PIECE TANKS
ENGINE
•5.1-gallon tank is made from 16-gauge stamped steel
•Available in standard or 2” extended length
•Smooth-top tank eliminates the dash completely and requires custom mounting of gauges, ignition switch and dash lights
•Dash-style tank has mounting provisions for stock-style dash and ignition switch (not included)
•Tank with fuel gauge bungs accepts OEM-style or aftermarket fuel gauges
•Aero tank includes gas caps; screw-in cap tank requires the use of 82-E96 gas caps (sold separately)
TRANSMISSION
& DRIVELINE
NOTE: Seat nose may require modification to fit properly with extended tanks. Some models may require sending unit modification.
PART #
DESCRIPTION
FOR 01-06 FXST, FLST W/ FUEL INJECTION AND 04-06 FXST, FLST W/ CARB (EXCEPT FXSTD)
1914-18611
Dash style with fuel gauge bung, single screw-in cap
0701-01671,2
2” extended w/ one screw bung and dummy bung for OEM gas gauge
1914-18631
2” extended dash style, dual screw-in caps
1
2” extended dash stye with fuel gauge bung, single screw-in cap
1914-1864
FOR 00-03 FXST, FLST W/ CARB (EXCEPT FXSTD)
1914-1813
Dash stye with fuel gauge bung, screw-in cap
1914-1814
2” extended dash style with fuel gauge bung, single screw-in cap
FOR 00-06 FXST, FLST W/ CARB (EXCEPT FXSTD)
1914-1810
2” extended smooth top, center fill, single Aero cap
1
2
SUG. RETAIL
$389.95
359.95
424.95
429.95
369.95
419.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
499.95
Requires the use of petcock adapter OEM# 62842-00 or Drag P/N 0705-0024 when used in listed carb applications.
Will not fit EFI models.
HANDLEBARS,
CONTROLS
& MIRRORS
DS-390071
Side profile
CABLES
0701-0010
BRAKES
TANKS &
OIL FILTERS
DS-390392
DASHES
& GAUGES
0701-0001
FRAMES,
SUSPENSION
& FENDERS
DS-390071
MUSTANG GAS TANK
•Fat Bob-style, low-tunnel
tank holds approximately 3.3 gallons
•Features a 3/8” NPT-style petcock
mount with two 1/4” NPT
crossover fittings
•Available as a single- or
dual-cap design
•Measures 193/4” L (including mounting
tabs) x 111/2” W x 71/2” H (approximately)
NOTE: Not for use on
fuel-injected models.
PART #
0701-0001
0701-0010
DESCRIPTION
W/ single cap
W/ dual cap
SUG.
RETAIL
$99.95
107.95
ONE-PIECE EXTENDED GAS TANKS
•Smooth-top tanks eliminate the dash completely
and will require custom mounting of ignition
switch, dash lights and speedometer
•Tank measures 221/2” L by 16” W
•Aero caps are included with tank; screw-in
caps are not included and must be purchased
separately (use 82-E96 style caps)
•Includes all necessary hardware
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
NOTE: 96-99 models require the use
of pre-96 petcock.
PART #
DESCRIPTION
SMOOTH-TOP STYLE TANKS FOR 84-99 FXST, FLST
DS-390071
With single screw-in cap
DS-390392
With single Aero cap
SUG. RETAIL
$354.95
449.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
885
SECTION
15
WINDSHIELDS
2107-1737
TOURING
Side profile
2107-1737
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ONE-PIECE 2” EXTENDED GAS TANKS
DS-391335
•Gas tanks are fully functional; no dummy extensions
•2” stretch over stock length; capacity is approximately 4.2 gallons
•Available in a smooth-top style for use with standard screw-in caps or with
•Aero cap included; screw-in gas caps sold separately (use 82-E96 style)
•Smooth top tanks require custom gauge mounting
•Accept late-style petcock (22mm)
•Come complete with all necessary mounting hardware
NOTE: Seat nose may require modification.
locking aero cap
PART #
FOR 82-94, 99-00 FXR
2107-1737
DS-391335
DESCRIPTION
Single locking Aero cap
Dual screw-in caps
DS-391291
Side profile
DS-390391
Side profile
DS-391331
Side profile
DS-391291
DS-390391
DS-391331
ENGINE
SUG. RETAIL
$439.95
357.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
EXTENDED TWO-PIECE FLAT-SIDE GAS TANKS
•2” extended tanks are fully functional; no dummy extensions welded to rear of tank
•4” extensions comprised of fully functional 2” extended tanks with additional 2” dummy extensions welded to the rear of the gas tanks
•Tanks come in a raw finish and accept stock-style speedometer and dash
•Contoured to fit around the nose of most seats (some seats may require modification)
•Available in 5.2-gallon style for use with standard screw-in caps
•Aero caps are included with tank
•Screw-in caps are sold separately (use 82-E96 style)
•Sold as a set
NOTE: 96-99 models require pre-95 screw-in gas caps and petcock.
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
NOTE: See SEATS & SISSY BARS section for custom seats and seat pans to fit with extended tanks.
PART #
DESCRIPTION
SUG. RETAIL
2” EXTENDED TANKS FOR 84-99 FXST, FLST, 85-86 FXWG AND FXSB
DS-391291
5.2-gal. tank for use with dual screw-in caps
$349.95
DS-390391
5.2-gal. tank with Aero locking caps
499.95
DS-391237
Side profile
PART #
DESCRIPTION
SUG. RETAIL
4” EXTENDED TANK FOR 84-99 FXST, FLST, 85-86 FXWG AND FXSB
DS-391331
5.2-gal. tank for use with dual screw-in caps
$419.95
DS-391238
Side profile
DS-391238
FOOTRESTS
& LICENSE
PLATE FRAMES FAT BOB-STYLE GAS TANKS
•Distinctive reproduction gas tanks constructed of drawn steel
TIRES,
•Manufactured to exact OEM specifications
TUBES &
NOTE: Stock dash may need to be shimmed.
WHEELS
NOTE: 96-99 models require the use of pre-95 gas caps and petcock.
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
886
PART #
DESCRIPTION
TANKS FOR USE WITH 82-E96 SCREW-IN GAS CAPS (SOLD SEPARATELY) FOR 84-99 FXST, FLST, 85-86 FX/FXWG
DS-391237
3.5-gal. Flatside tank; repl. OEM #s 61218-85 (right side) and 61426-85 (left side)
DS-391238
5-gal. Flatside tank; repl. OEM #s 61211-84A (right side) and 61228-84 (left side)
DS-391234
6-gal. Flatside tank
SUG. RETAIL
$229.95
229.95
299.95
SECTION
15
WINDSHIELDS
TOURING
LUGGAGE
0701-0187
0701-0186
SEATS &
SISSY BARS
FATBOB GAS TANKS
•4.2 gallon tank bolts to stock frame
•Comes with mounting kit and hose line fittings
•PART #0701-0186 features a left side rear external outlet for stock petcock; PART #0701-0187 features a left side center external outlet for stock petcock
•Measures 191/4” L x 141/2” W x 8” D; hole-to-hole center line on
mounting brackets measures 145/8”
PART #
DESCRIPTION
SUG. RETAIL
NOTE: Paughco recommends all tanks be mounted on leather spacers
0701-0187
For 95-03 XL models
$353.95
or bushings.
For 82-94 XL models
353.95
NOTE: All tanks are pressure-tested and are bare metal; fit before painting. 0701-0186
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
DS-391231
Side profile
TRANSMISSION
& DRIVELINE
FAT BOB-STYLE
GAS TANKS
GASKETS
& SEALS
•Fat Bob-style tanks accept stock
dash, speedo equipment and
standard late-model (22mm)
Harley petcocks
•Available in 31/2- or
5-gallon versions
•Gas caps sold separately
ELECTRICAL
DS-391236
PART #
DESCRIPTION
FOR 82-E96 SCREW-IN GAS CAP STYLE TANK
FOR 48-84 FX, FL AND CUSTOM FRAMES TO 84
DS-391236
5-gal. tank; repl. OEM #s 61213-83 and 61229-83
DS-391322
SUG.
RETAIL
$215.95
PART #
DESCRIPTION
FOR EARLY TWIST-LOCK GAS CAP STYLE TANKS
FOR 48-84 FX, FL AND CUSTOM FRAMES TO 84
DS-391230
31/2-gal. tank
DS-391231
5-gal. tank
SUG. RETAIL
$182.95
199.95
DS-391322
Side profile
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
EXTENDED DASH-STYLE RUBBER-MOUNT QUICKBOB® TANK KITS
•Fully functional extended design, 2” longer than a standard Quickbob tank
•Allows the lines of the tank to flow into the lines of the seat for a great custom look
•Tanks have cutout in rear for seat nose (some seats may need to be modified)
•95-03 tank kit includes a three-light dash for use with the OEM electronic speedo (except customs), 6-post Fat Bob ignition switch, ignition switch
relocation bracket, coil bracket and a screw-in gas cap
•82-94 tank kit includes a three-light dash, dash base, 2:1 ratio speedo with trip reset (68-84 style face), rubber dampener, a 6-post Fat Bob ignition
switch and a screw-in gas cap
•All tanks come with necessary mounting brackets
•3.9-gallon fuel capacity
•Utilizes a 22mm petcock
PART #
DESCRIPTION
SUG. RETAIL
NOTE: When this gas tank is installed on 92 or later models and the OEM continuous
DS-391348
For 95-03 XL models (exc. 1200S model)
$536.95
venting system is eliminated or disconnected, you may not reuse your stock
DS-391322
For 82-94 XL models
579.95
vented cap, but may replace it with an earlier version of the screw-type caps.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
887
SECTION
15
WINDSHIELDS
DS-391352
Side profile
TOURING
LUGGAGE
DS-391351
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
EXTENDED SMOOTH-TOP QUICKBOB®
RUBBER-MOUNT GAS TANKS
EXTENDED SMOOTH-TOP
GAS TANK
•Higher-capacity (approximately
4-gallon) 2” extended tanks
•Mounts to stock location; requires
use of a custom seat to match
rear tank cut-out
•Accepts a 22mm petcock and latestyle screw-in cap (sold separately)
NOTE: Will require a custom seat;
stock seat will not fit.
PART #
DESCRIPTION
0701-0098 For 04-06 XL
SUG.
RETAIL
$335.95
DS-390077
•Extended design of these tanks allows the lines of the tank to flow into the
lines of the seat for a great custom look
•2” longer than a standard QuickBob tank
•Available in a single- or dual-gas cap style
•Tanks have cutout in rear for seat nose (some seats may need to be shortened)
•82-03 tanks feature screw-in bungs (use 82-E96 style caps)
•3.9-gallon capacity
•Utilize a 22mm petcock
•Each tank comes with necessary mounting brackets
PART #
DESCRIPTION
SUG. RETAIL
NOTE: When gas tanks are installed on 92 and later models
FOR 82-03 XL MODELS (REQUIRES DS-390077
and the OEM continuous venting system is eliminated or
IGNITION COIL RELOCATION KIT; SOLD SEPARATELY)
disconnected, you may not reuse your stock vented cap,
DS-391351 Twin-cap style gas tank
$381.95
but may replace it with an earlier version of the
DS-391352 Single-cap style gas tank
381.95
screw-type caps.
DS-390077 Ignition relocation kit
21.95
NOTE: Will not fit 1200S models.
DS-391273
DS-391272
Side profile
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
DS-390396
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
RUBBER-MOUNT
DS-391272
QUICKBOB®
GAS TANKS
•One-piece 3.6-gallon replicas of the Harley Fat Bob tanks
•Available with a complete dash assembly or in a smooth-top design
•Each style tank comes with rubber mount brackets and hardware
•Speedometer not included, but any of the FL-style speedos (except
DS-243870) may be used with DS-391273 tank on 82-94 models only
•When ordering speedo, be sure to match existing speedo ratio with the
one you’re ordering
•PART #DS-391284 mount kit with dash allows the use of the OEM
electronic speedometer on 95-03 models (except customs); also includes
coil and ignition switch relocation brackets (PART #DS-391273 tank only)
NOTE: When this gas tank is installed on 92 and later models and the OEM
continuous venting system is eliminated or disconnected, you may not
reuse your stock vented cap, but may replace it with an 82-E96 version of
the screw-type caps.
NOTE: Will not fit 1200S models.
FOOTRESTS
& LICENSE
PLATE FRAMES
•Rubber-mounted bolt-on style flat-bottom tank is made from heavygauge steel
•Reinforced seams and extra-strong mounting tabs
•Tank has a 3.3-gallon “high-tunnel” design to add fuel capacity without
looking tall
•Features a chrome aero-style locking gas cap with keys
•Accepts a 22mm petcock (right side)
HARDWARE,
CHEMICALS
& TOOLS
888
DS-391284
DS-391285
DS-391285
DESCRIPTION
SUG. RETAIL
MODELS
Smooth-top with Aero cap
$429.95
Smooth-top for use with screw-in caps
341.95
Dash style for use with screw-in caps (requires
DS-391284 for mounting on 95-03 models)
399.95
Dash kit for 95-03 OEM electric speedo
81.95
Repl. rubber mounting kit for 82-03
42.95
GAS TANKS WITH CHROME AERO-STYLE GAS CAP
TIRES,
TUBES &
WHEELS
COVERS,
SECURITY
& GENERAL
DS-391284
PART #
FOR 82-03 XL
DS-390396
DS-391272
DS-391273
NOTE: May require seat nose modification and relocation of ignition
switch on some models.
DS-390340
DS-390395
PART #
DS-390340
DS-390395
DESCRIPTION
For 82-94 XL
For 95-03 XL
SUG. RETAIL
$236.95
269.95
SECTION
GAS TANKS
DS-391223
Side profile
•Bolt-on gas tanks for XL
models are made of heavygauge steel with reinforced seams
•Come complete with extra-strong mounting tabs
•2.9-gallon tanks are 2” wider than stock tanks
•3.3-gallon tanks have “high-tunnel” design so they add
fuel capacity without looking “tall”
•3.3-gallon tanks may require seat nose modifications
•PART #DS-391220 uses a 3/8” NPT petcock, all others use
22mm; petcocks sold separately later in this section
WINDSHIELDS
TOURING
LUGGAGE
NOTE: When this gas tank is installed on 92 and later
models and the Original Equipment continuous venting
system is eliminated or disconnected, you may not reuse
your stock vented cap, but may replace it with an earlier version of the screw-type caps.
DS-391225
NOTE: 54-78, 82-94 tanks have petcocks on the right side, 95-03 tanks have petcock on left side.
PART #
DS-391226
DS-391225
DS-391224
15
DESCRIPTION
2.9-gallon rubber mount tank for 95-03 XL
SUG. RETAIL
$169.95
149.95
149.95
PART #
DS-391223
DS-391220
DESCRIPTION
2.9-gallon for 54-78 XL
SUG. RETAIL
$169.95
149.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
UNIVERSAL TANK
MOUNT KIT
UNIVERSAL GAS TANK BASE
•For use with Lowlife and Hardlife frames
•Made from 16-gauge steel
•Allows fabricators to start with a radius base and tunnel to fit Lowlife or Hardlife chassis or any other chassis
with radius backbone
•Includes four flush mounts, petcock and fuel crossovers TIG welded into place
•Use in conjunction with Universal Tank
PART #
DESCRIPTION
SUG. RETAIL
Mount PART #0704-0004
0704-0003
Universal tank base
$539.95
FAT BOB-STYLE
GAS TANK
CONVERSION
MOUNTS
PART #
DESCRIPTION
0704-0004 Universal tank
mount kit
RETAIL
$129.95
•Kit includes mount brackets,
rubber mounts, hose protector,
chrome-plated beveled washers
and mounting screws
•Can be used to update the stock
mounting hardware or for
new constructions
DESCRIPTION
54-84 frames
SUG. RETAIL
$65.95
PART #
DS-391301
DESCRIPTION
For 84 FXST, FLST and all 85-99 models w/
split tanks
SUG. RETAIL
$52.95
HANDLEBARS,
CONTROLS
& MIRRORS
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
GAS TANK MOUNTING HARDWARE KITS
•Custom chrome-plated mounting kits
•Available in acorn nut or flat head Allen styles
1913-3014
1913-3016
FOOTRESTS
& LICENSE
PLATE FRAMES
1913-3007
2401-0119
PART #
DESCRIPTION
SUG. RETAIL
FLAT HEAD ALLEN-STYLE W/ COUNTERSUNK WASHERS
1913-3006
For 98-09 FLT models
$11.95
1913-3013
For 91-99 FXST/FLST models
11.95
TIRES,
TUBES &
WHEELS
1913-3006
CUSTOM BOLT KIT FOR FLAT SIDE TANKS
•Chrome-plated hardware replaces front OEM gas tank mounting bolts
•Includes four 5/16-18 x 3/4” flathead Allen bolts with recessed washers
PART #
DS-391357
LIGHTING
BRAKES
1913-3015
PART #
DESCRIPTION
SUG. RETAIL
ACORN NUT-STYLE W/ STUD
1913-3015
$9.95
1913-3016
9.95
1913-3014
For 91-03 Dyna models
19.95
2401-0119
For 04-09 XL models
19.95
1913-3007
For 96-03 XL models
30.95
ELECTRICAL
CABLES
CUSTOM MOUNTING KIT
FOR FLATSIDE TANKS
•Complete tank mount
kit adapts new rubber-mounted flatside
fuel tanks to 84 and earlier solid tankmounted frames
•Two of the mounts bolt on; rear mount
requires welding
•Include all mounting hardware, grommets
and instructions
PART #
DS-391300
•For use with Lowlife and
Hardlife frames
•Extra-thick cross members feature
rubber isolated tank mounts to
absorb vibration
•Minor fitment, fabrication and
welding required
SUG.
GASKETS
& SEALS
DESCRIPTION
For all 91-99 Softail models
SUG. RETAIL
$14.95
1913-3013
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
889
SECTION
15
IGNITION
RELOCATION
KIT
WINDSHIELDS
CUSTOM
ONE-PIECE
GAS TANK
MOUNTING KIT
•Makes installing a
large tank a much
simpler task
•Moves ignition
switch from the
right front of fuel
tank to the left rear cylinder head
•Allows you to retain the original ignition
switch cover
•Also included is a new chrome-plated ignition
coil mounting bracket and hardware
•Kit includes front and rear tank mounts, rubber
grommets and hardware
NOTE: Coil bracket will not work on 98-03 1200
Sport models.
PART #
DESCRIPTION
DS-391648 For most aftermarket
FXST, FLST one-piece
tanks on 84-99 models
PART #
DESCRIPTION
DS-390077 For 95-03 XL models;
repl. OEM #s 31723-71A
and 31727-85
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
SUG. RETAIL
$42.95
SUG. RETAIL
WELDLESS TANK BUNG
•Use when an alternative fuel source
is needed, like when installing
a nitrous oxide “wet” kit
on fuel-injected motorcycles
or as a fitting for an oil tank
•Requires a 9/16” hole for mounting; will work
with any tank up to 5/8” wall thickness
•1/8” NPT internal thread size
•CNC-machined from billet aluminum; includes
a high-quality Viton O-ring for a positive seal,
a stainless steel nut and washer and an 80
micron filter
PART #
0705-0043
DESCRIPTION
Weldless tank bung
SUG. RETAIL
$41.95
$21.95
0705-0039
FUEL/AIR
SYSTEMS
0705-0034
ENGINE
0705-0040
0705-0035
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
•Weld-on tank bungs are
available in 22mm male
(stock on Harley-Davidson
carbureted fuel tanks after 1975) or 3/8” NPT
female (stock on pre-1975 Harley-Davidson
fuel tanks)
•Designed to be welded directly to the fuel tank
•Great for custom tanks or repairing stock tanks
•Sold each
PART #
3/8” NPT
0705-0039
0705-0040
22MM
0705-0034
0705-0035
DESCRIPTION
SUG. RETAIL
Steel
Aluminum
$9.95
11.95
Steel
Aluminum
9.95
11.95
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FUEL TANK
MOUNTING
GROMMETS
•Rubber mounting
grommets from Genuine James Gaskets
•Sold in 12 packs
PART #
DESCRIPTION
SUG. RETAIL
DS-391241 For 84-99 Softail, 85-86
FX/FXWG with OEM
gas tanks and most
aftermarket Fat Bob gas
tanks; repl. OEM #11447
$1.95 (ea.)
FRAMES,
SUSPENSION
& FENDERS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
890
FUEL TANK
TAB TRIM
•Add some sizzle to your
Sportster’s fuel tank
•Show-chromed mounting tabs feature
chromed fasteners that securely hold the tank
in place and look great doing it
•Sold in pairs
PART #
DESCRIPTION
0521-0228 For 96-03 XL w/ stock
fuel tank
SUG. RETAIL
$39.95
REPLACEMENT
GAS TANK
BUNGS
•Weld-in style bungs used for custom-mounting
filler hole in fuel tanks
•Accepts 82-E96 screw-in gas caps
•Available in vented or non-vented styles
•Sold each
PART #
DS-280458
DS-280459
•Gooden-Tight tank bushings
•Injection-molded high-grade
polyurethane with two-piece
air-pocketed design
0704-0006
0704-0007
•Chemical-resistant, weather-proof,
won’t crack, break down or damage sheet metal or paint
•Can be used to mount virtually anything that would normally
be rubber mounted
•Two-piece busing design make for easy installation
•Aluminum bushing i.d. is 5/16”
SUG. RETAIL
$7.95
7.95
0704-0008
PART #
DESCRIPTION
FOR 84-99 FXST, FLST, 85-86 FX, FXWG
0704-0006
Polyurethane bushings only (10-pk.)
0704-0007
CNC-machined aluminum bushing inserts (6-pk.)
0704-0008
Aluminum bushing inserts and polyurethane bushing combo (10-pk.)
•Rubber grommet with metal sleeve
•Sold each to consumer; sold to dealer in packs
of 10
SUG. RETAIL
$1.95 (ea.)
$34.95
42.95
79.95
•Kit includes six rubber grommets and two steel sleeves
•One kit required for a set of tanks
DESCRIPTION
84-99 FXST/FLST, 85-86 FX/FXWG
SUG. RETAIL
$8.95
DS-391253
•Economical way to get the look of stretched gas tanks
•Curved to match the tank’s natural curves
•Do not increase gas tank capacity
•Extension for 84-99 flat-side tanks require a shortened seat nose
•For custom dashes that fit these extensions, see section 16
GAS TANK GROMMETS
SUG. RETAIL
FUEL TANK MOUNTING GROMMET KIT
WELD-ON GAS TANK EXTENSIONS
PART #
DESCRIPTION
DS-391240 For 85-86 FX, FXWG
and 84-99 Softail OEM
gas tanks and most
aftermarket Fat Bobstyle gas tanks; repl.
OEM #11447 (grommet)
and 5775 (sleeve)
DESCRIPTION
Vented
Non-vented
FUEL TANK
MOUNTING BUSHINGS
PART #
1913-3005
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
DS-280458
DS-280459
PETCOCK BUNGS
NOTE: Installation is recommended by experienced professionals
only. If tanks have a sealer in them, installation will cause the
sealer to peel from tank. Remember to pressure-check tanks
before resealing and painting.
PART #
DS-391253
DS-391254
0701-0095
0701-0096
0701-0097
DESCRIPTION
3” for 31/2-gallon 84-99 flat-side tanks
3” for 5-gallon 84-99 flat-side tanks
6” for all 5-gallon flat side tanks
6” for 00-07 Softail (except Deuce)
6” for 93-07 FL
SUG. RETAIL
$163.95
163.95 0701-0096
183.95
183.95
0701-0097
183.95
0701-0095
SECTION
15
WINDSHIELDS
TOURING
0703-0058
0703-0199
0703-0059
LUGGAGE
POP-UP GAS CAPS
•Fit is nearly flush when closed; opens easily with just a quarter-turn of
the center of cap
•Billet aluminum construction that is polished and chrome-plated
•Vented and non-vented styles available to fit early and late-model
screw-in style tanks
PART #
DESCRIPTION
SUG. RETAIL
FOR L96-09 MODELS (EXCEPT 04-09 XL)
0703-0060
Vented
$39.95
0703-0061
Non-vented
39.95
FOR 82-E96 MODELS AND 04-09 XL
0703-0058
Vented
39.95
0703-0059
Non-vented
39.95
SEATS &
SISSY BARS
EXHAUST
0703-0200
FUEL/AIR
SYSTEMS
0703-0201
ENGINE
GAS CAPS WITH PAINT PROTECTORS
MALTESE CROSS GAS CAPS
•Billet aluminum construction, then
polished and chrome plated
•Vented and non-vented
styles available
•Fit early and late-model screw-in
style tanks
PART #
FOR L96-09 MODELS
0703-0056
0703-0057
FOR 82-E96 MODELS
0703-0054
0703-0055
0703-0056
0703-0054
DESCRIPTION
SUG. RETAIL
Vented
Non-vented
$37.95
37.95
Vented
Non-vented
37.95
37.95
•Chromed low-profile gas caps feature screw-in paint protectors and
ratchet-action cap
•Available in vented, non-vented and dummy styles
•Vented cap has right-hand threads and can be used in either the right
side of double-capped tanks or in single-cap tanks
•Non-vented cap has left-hand threads and is used only in the left side of
double-capped tanks
•The dummy cap replaces the OEM fuel gauge in tanks that feature the
fuel gauge in the left side; does not feature a fuel gauge
•Sold each; comes complete with installation tool for paint protector
PART #
DESCRIPTION
FOR L96-09 H-D MODELS
0703-0199
Vented, RH thread
0703-0200
Non-vented, LH thread
0703-0201
Dummy style, repl. fuel gauge
CHROME SCREW-IN
LOCKING GAS CAPS
•Locking caps go a long
way towards
preventing theft
or vandalism
•Sold each
PART #
L96-09 STYLE
7805-0320
7805-0321
82-E96 STYLE
7805-0318
7805-0319
SUG. RETAIL
$59.95
49.95
29.95
DS-390135
7805-0319
7805-0318
SUG. RETAIL
Vented
Non-vented
$16.95
16.95
Vented
Non-vented
16.95
16.95
•Feature a provision for evaporative emissions
control equipment
•Available with or without a vent for 82-05
models; sold individually
PART #
L96-09 MODELS
DS-390281
DS-390282
82-E96 MODELS
DS-390135
DS-390136
DESCRIPTION
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CHROME SCREW-IN GAS CAPS
DESCRIPTION
TRANSMISSION
& DRIVELINE
CABLES
SUG. RETAIL
W/ vent; repl. OEM #61272-92A
W/o vent; repl. OEM #61103-83B
$13.95
13.95
W/ vent; repl. OEM #61102-83A
W/o vent; repl. OEM #61103-83B
13.95
13.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DS-390194
DS-390130
0703-0228
0703-0229
FOOTRESTS
& LICENSE
PLATE FRAMES
SCREW-IN LOCKING GAS CAPS
ORIGINAL-STYLE GAS CAPS
•Replacement gas caps for OEM and custom tanks, available with or
without a vent
•Both are chromed and feature stamped steel construction (will not fit
screw-in type tanks)
PART #
DS-390130
DS-390131
DS-390193
DS-390194
DESCRIPTION
Gas cap w/ vent; repl. OEM #61102-73
Gas cap w/o vent; repl. OEM #61103-73
Gas cap w/ vent; repl. OEM #61103-35
Gas cap w/o vent; repl. OEM #61103-65
SUG. RETAIL
$10.95
10.95
7.95
7.95
•Locking cap discourages fuel theft or tampering
•Lock has a swing-away cover to keep dirt and debris out of the
locking mechanism
•Come with two keys
•Sold each
PART #
L96-09 MODELS
0703-0230
0703-0231
82-E96 MODELS
0703-0228
0703-0229
DESCRIPTION
TIRES,
TUBES &
WHEELS
SUG. RETAIL
Vented
Non-vented
$19.95
19.95
Vented
Non-vented
19.95
19.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
891
SECTION
15
WINDSHIELDS
TOURING
DELUXE GAS CAPS
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
•One-piece, die-cast gas caps are
DS-390118
completely chrome-finished and
feature Nytrel/cork seals
•Vented version has a check ball valve to
prevent leakage
•Both caps fit any tank using pre-82, early-type twist-on gas caps (will not
fit screw-in type tanks)
PART #
DS-390118
DS-390119
DESCRIPTION
Deluxe cap w/ vent
Deluxe cap w/o vent
SUG. RETAIL
$12.95
12.95
FUEL/AIR
SYSTEMS
DS-390134
DS-390148
“LIVE TO RIDE” GAS CAPS
•Complete thread-in gas caps feature the Live
To Ride/Eagle Spirit insignia
•3” diameter available in chrome or chrome with a gold insignia
•Sold individually
PART #
DESCRIPTION
FOR ALL 82-E96 MODELS
DS-390134
Chrome vented cap
DS-390137
Chrome nonvented cap
DS-390147
Chrome w/ gold insignia vented cap
DS-390148
Chrome w/ gold insignia nonvented cap
ENGINE
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
0703-0163
Peaked
0703-0162
BILLET
ALUMINUM
GAS CAPS
•Screw-in vented caps
sport the Roland Sands Design logo
•Available in black anodized Contrast Cut™ or chrome finish that matches
the Roland Sands Design Vintage gas tank kit, seat, seat kit, fender kit
and handlebars
PART #
DESCRIPTION
SUG. RETAIL
FOR L96-09 H-D MODELS
0703-0162
Black anodized
$89.95
0703-0163
Chrome
89.95
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
$18.95
18.95
27.95
27.95
Baby Moon
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
SUG. RETAIL
“DUMMY” GAS CAP
•For bikes with the fuel gauge on the left side
•Designed to match the Ness-Tech® “Low
Gravity” Baby Moon-style gas caps
•Quality construction, chrome finish
PART #
DS-390102
DESCRIPTION
Baby Moon
SUG. RETAIL
$47.95
Flamed
NESS-TECH® “LOW GRAVITY”
SCREW-IN GAS CAPS
Scalloped
•Chrome billet caps are so thin you can barely tell they’re
on the tanks
•Feature a narrow knurled edge with ratcheting action
cap so removal is easy
•Available in various styles
PART #
DESCRIPTION
FOR L96-09 MODELS
DS-390198
Peaked vented
DS-390223
Peaked non-vented
DS-390224
Baby Moon vented
DS-390229
Baby Moon non-vented
DS-390238
Flamed vented
DS-390273
Flamed non-vented
FOR 82-E96 MODELS
DS-390150
Peaked vented
DS-390152
Baby Moon vented
DS-390153
Baby Moon non-vented
DS-390158
Flamed vented
DS-390159
Flamed non-vented
0703-0223
Scalloped vented
SUG. RETAIL
$47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
892
0703-0159
2105-0039
0703-0160
2105-0042
2105-0048
2105-0050
BILLET GAS CAPS AND INTERCHANGEABLE INSERTS
•Two-piece design allows you to mix and match chrome and black anodized gas caps and insets to create a unique look
•Machined out of 6061 T-6 billet aluminum
•Gas caps and inserts are sold separately
PART #
GAS CAP FOR
0703-0159
0703-0160
0703-0153
0703-0154
DESCRIPTION
L96-09 MODELS
Chrome, non-vented
Black, non-vented
Chrome, vented
Black, vented
SUG. RETAIL
$66.95
66.95
66.95
66.95
PART #
DESCRIPTION
CHROME INSERTS
2105-0039
Iron Cross
2105-0041
Flame
2105-0047
Smooth
2105-0049
Ball-milled
SUG. RETAIL
$39.95
39.95
39.95
39.95
PART #
DESCRIPTION
BLACK INSERTS
2105-0040
Iron Cross
2105-0042
Flame
2105-0048
Smooth
2105-0050
Ball-milled
SUG. RETAIL
$39.95
39.95
39.95
39.95
SECTION
0703-0067
Shown
painted
15
WINDSHIELDS
0703-0203
TOURING
0703-0066
0703-0254
GAS CAPS
•Chrome, black, brass or raw vented caps
•Available with weld-in bungs for custom applications or with OEM
bung inserts for stock tanks
PART #
DESCRIPTION
WITH STEEL WELD-IN BUNG
7805-2021
Classic, raw
0703-0066
Classic, chrome
0703-0202
Classic, brass
0703-0251
Classic, black
0703-0067
Hot Rod, chrome
SUG. RETAIL
$209.95
194.95
229.95
194.95
194.95
LUGGAGE
0703-0164
PART #
DESCRIPTION
WITH STEEL WELD-IN BUNG (CONT)
0703-0203
Hot Rod, brass
0703-0252
Hot Rod, black
0703-0164
Flip-top, chrome
WITH L96-09 OEM BUNG INSERT
0703-0110
Classic, chrome
SUG. RETAIL
$229.95
194.95
185.95
PART #
WITH L96-09
0703-0111
0703-0253
0703-0254
0703-0165
DESCRIPTION
SUG. RETAIL
OEM BUNG INSERT (CONT)
Classic, raw
$142.95
Classic, black
194.95
Hot Rod, black
194.95
OEM flip-top, chrome
238.95
Bandit
Renegade
•Fits all screw-in gas tanks
•Protects expensive paint jobs from fuel nozzle chips and gas vapors;
upgrades the look with a custom gas cap
•Easy installation – Paint Protector simply screws into gas tank
and is locked down with the church key provided, then gas cap screws
into the Paint Protector, completely covering it
•Two styles to choose from: Bandit with peaked design and Renegade
with smooth-domed design
•Paint Protector sleeve is machined from 6061 T-6 aircraft-quality billet
aluminum; gas caps are machined from solid billet 303 stainless steel;
all parts are polished
•Sold in pairs (one vented, one non-vented) or individually (one vented)
PART #
DESCRIPTION
SUG. RETAIL
FOR L96-09 MODELS
DS-390081
Bandit gas cap (ea.)
$50.95
DS-390080
Bandit gas caps (pr.)
100.95
DS-390083
Renegade gas cap (ea.)
50.95
DS-390082
Renegade gas caps (pr.)
100.95
FOR 82-E96 MODELS
LMGC1041A
Bandit gas cap (ea.)
50.95
LMGC1041
Bandit gas caps (pr.)
100.95
LMGC1042A
Renegade gas cap (ea.)
50.95
LMGC1042
Renegade gas caps (pr.)
100.95
EXHAUST
177.95
FUEL/AIR
SYSTEMS
Bottle
opener
series
PAINT PROTECTOR
WITH BUILT-IN
STAINLESS GAS CAP
SEATS &
SISSY BARS
STAINLESS STEEL
THIN GAS CAPS
Bandit
Renegade
•CNC-machined from
303 stainless steel
•Hand polished
to a brilliant shine
•Available in two styles
•Sold in pairs (one vented, one
non-vented) or individually
(one vented)
•Bottle opener series comes
with a Landmark gas cap key
ENGINE
TRANSMISSION
& DRIVELINE
Knuried
series
GASKETS
& SEALS
Bandit
ELECTRICAL
Renegade
BOTTLE OPENER SERIES
•Less than 3mm above the tank
PART #
FOR 82-E96
DS-390180
DS-390181
DESCRIPTION
MODELS
Renegade (pr.)
Renegade (ea.)
SUG.
RETAIL
$83.95
44.95
PART #
FOR 82-E96
DS-390182
DS-390190
SUG.
DESCRIPTION
RETAIL
MODELS (CONT)
Bandit (pr.)
$83.95
Repl. gas cap key 4.95
PART #
FOR 82-E96
DS-390170
DS-390171
DS-390172
DESCRIPTION
MODELS
Renegade (pr.)
Renegade (ea.)
Bandit (pr.)
KNURLED SERIES
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
•Less than 4mm above the tank
PART #
FOR L96-08
DS-390020
DS-390022
DESCRIPTION
MODELS
Renegade (pr.)
Bandit (pr.)
SUG.
RETAIL
$83.95
83.95
SUG.
RETAIL
$83.95
44.95
83.95
CABLES
BRAKES
TANKS &
OIL FILTERS
0703-0236
2107-1500
BILLET GAS CAPS
DASHES
& GAUGES
0703-0063
•Constructed from a solid piece of 6061 billet aluminum
•Chrome-plated to show standards
•Replace stock vented and nonvented caps
•Crusader Maltese Cross cap has matching points cover,
derby cover and inspection cover also available
•Sold each
PART #
DESCRIPTION
FOR L96-09 STYLE TANKS
2107-1500
Warrior vented, chrome
0703-0063
Maltese vented, chrome
0703-0064
Maltese non-vented, chrome
0703-0220
Maltese vented, black
0703-0221
Maltese non-vented, black
0703-0235
Smoothie vented, chrome
0703-0236
Smoothie vented, black
0703-0237
Smoothie non-vented, chrome
0703-0238
Smoothie non-vented, black
FOR 82-E96 STYLE TANKS
0703-0239
Smoothie vented, chrome
0703-0240
Smoothie vented, black
0703-0241
Smoothie non-vented, chrome
0703-0242
Smoothie non-vented, black
DS-390038
FRAMES,
SUSPENSION
& FENDERS
0703-0235
DS-390039
SUG. RETAIL
$43.95
48.95
48.95
44.95
44.95
49.95
49.95
49.95
49.95
49.95
49.95
49.95
49.95
FLUSH-MOUNT GAS CAPS
•High-tech look of aviation-style fuel fillers
•Simply screws into the stock opening
in your gas tank
•Keyed entry permits the low profile and prevents unauthorized entry
•Outer rings prevent chips around gas opening
•Available in vented and non-vented styles for 83 and later screw-in style
tanks (L96-09 tanks will require reusing the stock gas cap gasket)
•Sold each
U.S. Patent #400838.
PART #
DESCRIPTION
DS-390038
Vented Fat Bob-style (right-hand thread)
DS-390039
Non-vented Fat Bob-style (left-hand thread)
0703-0219
Repl. key for DS-390038, DS-390039
SUG. RETAIL
$49.95
49.95
3.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
893
SECTION
15
WINDSHIELDS
TOURING
0703-0247
LUGGAGE
0703-0243
0703-0245
SPOKE GAS CAPS
SEATS &
SISSY BARS
EXHAUST
•Machined from billet aluminum
•Chrome finish
•Comes with steel weld-in bung
•For custom applications only
PART #
DESCRIPTION
0703-0247
Non-vented
0703-0248
Vented
DEAD END GAS CAPS
SUG. RETAIL
$214.95
214.95
FUEL/AIR
SYSTEMS
•Machined from billet aluminum
•Chrome finish
•Comes with steel weld-in bung
•For custom applications only
PART #
0703-0243
0703-0244
0703-0245
0703-0246
DESCRIPTION
Smooth, non-vented
Smooth, vented
Notched, non-vented
Notched, vented
SUG. RETAIL
$214.95
214.95
214.95
214.95
ENGINE
0703-0209
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0703-0213
GAS CAPS AND BUNGS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
POP-UP GAS CAP
•Features a weld-in, stainless steel bung with a pop-up aluminum gas cap
•Measures 23/8” dia.
PART #
DESCRIPTION
SUG. RETAIL
0703-0113
Flush mount gas cap
$157.95
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
POP-UP CAP
•Pop-up vented gas cap assembly is available in steel construction
•Weld-in style, for custom applications
PART #
301170
DESCRIPTION
Pop-up w/ steel bung
SUG. RETAIL
$83.95
•All styles are CNC-machined from billet aluminum
•Vented and non-vented caps available
•Caps with HD-style bung adapter fit 82-E96 right-hand screw-in
style tanks
•Caps with weld-in bungs are for custom applications
•Bungs available separately for use with Covington gas caps
PART #
DESCRIPTION
SUG. RETAIL
NON-VENTED GAS CAPS WITH BUNG
0703-0206 Spoke cap, chrome, w/ steel weld-in bung
$179.95
0703-0207 Spoke cap, raw, w/ steel weld-in bung
159.95
0703-0211 Sprocket cap, chrome, w/ weld-in steel bung
159.95
0703-0212 Sprocket cap, raw, w/ weld-in steel bung
139.95
VENTED GAS CAPS WITH BUNG
0703-0208 Spoke cap, chrome, w/ steel weld-in bung
179.95
0703-0209 Spoke cap, chrome for 82-E96 right-hand screwin style gas tanks
199.95
0703-0210 Spoke cap, raw, w/ steel weld-in bung
159.95
0703-0213 Sprocket cap, chrome, w/ weld-in steel bung
159.95
0703-0214 Sprocket cap, chrome for 82-E96 right-hand
screw-in style gas tanks
199.95
0703-0215 Sprocket cap, raw, w/ steel weld-in bung
139.95
GAS TANK BUNGS
0703-0216 Aluminum weld-in bung for custom aluminum
tank applications
27.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
894
KUSTOM KNOCK-OFF GAS CAP
ZOMBIE GAS CAP
•Leak-proof and oh so small
•Weld-in unit drops into any steel tank for a minimalist look
•Dimensions: bung measures 1.5” dia.; cap measures 13/4” dia.
PART #
DESCRIPTION
SUG. RETAIL
0703-0065
Zombie vented gas cap
$115.95
•Latest additon to Chopper Inc.’s Six Gun series
•.44 magnum bullets design
•Polished billet three-bar cap with steel weld-in bung
•O-ring sealed and vented
•For custom applications
•Made in U.S.A.
PART #
DESCRIPTION
0703-0104
Knock-off custom gas cap
SUG. RETAIL
$194.95
SECTION
15
WINDSHIELDS
1914-1525
AERO GAS CAPS
•Replacement gas caps for
Drag Specialties gas tanks
that accept Aero caps
1914-1526
•Include keys, gasket and bolts
PART #
DESCRIPTION
1914-1525
120mm vented (ea.)
1914-1526
95mm vented (ea.)
1914-1527
95mm non-vented (ea.)
1914-1528
95mm one vented/one non-vented (pr.)
DS-390062
DS-390051
TOURING
SUG. RETAIL
$65.95
58.95
58.95
115.95
DS-390052
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
DS-390066
4250AEB
4250AE
FUEL/AIR
SYSTEMS
DS-390054
ENGINE
A26S
4250AG
TBV45
DS-390060
•Aircraft-style flush-mount polished gas caps are available in
21/4” and 3” diameters
•21/4” diameter caps come with or without key locks
•Available in vented and non-vented versions
•Feature “weld-in” or “bolt-in” style bungs
•Bolt-in styles include bolts and nut plates, except PART #DS-390060
•Made in the U.S.A. by Custom Cycle Engineering
DESCRIPTION
NON-LOCKING SUG. RETAIL LOCKING SUG. RETAIL
WELD-IN STEEL BUNG
21/4” dia. vented
DS-390050
$158.95 DS-390062
$183.95
21/4” dia. non-vented DS-390051
158.95 DS-390063
183.95
3” dia. vented
DS-390052
167.95 WELD-IN ALUMINUM BUNG
21/4” dia. vented
DS-390054
158.95 BOLT-IN ALUMINUM BUNG
21/4” dia. vented
DS-390058
167.95 DS-390066
175.95
21/4” dia. non-vented DS-390059
167.95 DS-390067
175.95
3” dia. vented
DS-390060
171.95 -
GASKETS
& SEALS
•Top-quality aircraft-style flush-mount gas caps
from Newton
•Aluminum bolt-in cap kits come with
mounting hardware
•Vent converter TBV45 converts all Newton caps to vented;
available separately
PART #
DESCRIPTION
4250AE
3” non-locking polished
4250AEB
3” non-locking black
4250AG
3” locking polished
A26S
11/2” non-locking polished
TBV45
Vent valve converter
TRANSMISSION
& DRIVELINE
ELECTRICAL
SUG. RETAIL
$179.95
179.95
187.95
159.95
47.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
DS-390069
CABLES
FLUSH-MOUNT
LOCKING CAPS
•For use with Drag Specialties
gas tanks that accept flushmount gas caps
PART #
DS-390079
DS-390069
BRAKES
DESCRIPTION
Gas cap set (one vented, one non-vented)
Vented gas cap (ea.)
SUG. RETAIL
$50.95
27.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
DS-390196
DS-390126
DS-390127
“LIVE TO RIDE”/EAGLE SPIRIT
GAS CAP COVERS
•Gas cap covers are a great way to detail a bike
•Available with a detailed chrome or gold-plated
eagle/banner with the Live to Ride and the Eagle Spirit script recessed
into each part
•Covers are held on by special adhesive tape and include one left- and one
right-hand eagle emblem
•Sold in pairs
PART #
FOR MOST 73-09 MODELS
DS-390127
DS-390126
DESCRIPTION
Gold
Chrome
SUG. RETAIL
$44.95
21.95
DS-390191
DS-390192
DS-390167
PAINT SAVER PLUS
SYSTEMS BY CARLINI
•Easier-to-install Paint Savers use a
nitrile rubber vapor seal
•Same highly polished stainless steel parts as the original Paint Savers
•Protects tank from being chipped or scratched when filling with gas
•May even conceal paint damage already present
•Available for standard filler necks and dummy filler necks with the
fuel gauge
PART #
DESCRIPTION
SUG. RETAIL
DS-390196 Paint Saver ring for L96-09 smooth-top tanks
$29.95
DS-390191 Paint Saver Plus ring for 82-E96 tanks w/ welded lip
29.95
DS-390192 Paint Saver Plus ring for fuel gauge to
match DS-390191
29.95
DS-390167 Paint Saver Plus ring for bayonet gas caps
29.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
895
SECTION
15
ROUND SERIES
WINDSHIELDS
Diamond
Wave
Smooth
Finned
Flag
Flamed
Lightning
Grooved
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
HEX SERIES
FInned
Smooth
Oval
Flag
ENGINE
Hose outlet
facing
forward
TRANSMISSION
& DRIVELINE
Hose outlet
facing
backward
GASKETS
& SEALS
ELECTRICAL
Hose outlet
facing
inward
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
896
POWER-FLO™ FUEL VALVES
DS-390231
•Valves feature a brass body with show-quality chrome plating
•Substantially higher fuel flow compared to OEM or aftermarket fuel valve
•Necessary for adequate fuel delivery even on stock motorcycles and a must for high performance
•Available for 75 and later models with a 22mm external thread, or pre-75 tanks internally threaded
for 3/8” NPT
•Adapter nut included on 22mm threaded valves
•Patents apply
NOTE: All descriptions are made from a seated position on the
outlet position to the reserve position of the fuel valve lever.
3/8” NPT
22MM
DESCRIPTION
ROUND
22MM HEX ROUND
90° OUTLET FACING FORWARD
Smooth
DS-390240 DS-390231 DS-390245
Grooved
DS-390241 Lightning
DS-390242 Diamond
DS-390243 Flamed
DS-390244 90°OUTLET FACING BACKWARD
Smooth
DS-390250 DS-390233 DS-390255
Grooved
DS-390251 Lightning
DS-390252 Diamond
DS-390253 DS-390258
Flamed
DS-390254 180° OUTLET FACING INWARD
Finned
DS-390506 DS-390509 Wave
DS-390507 -
motorcycle with a reference from
3/8”
NPT
HEX
DS-390209
-
22MM
DESCRIPTION
ROUND
22MM HEX
180° OUTLET FACING INWARD (CONT)
Smooth
DS-390260 DS-390235
Grooved
DS-390261 Lightning
DS-390262 Diamond
DS-390263 Flamed
DS-390264 Oval
DS-390510
Smooth (down outlet) DS-390237
Flag
2107-0000
2107-0001
CHROME ADAPTER NUTS FOR 75-06 HD
3/8 NPT x 22mm
(approximately 7/8”)
22mm to 22mm
0705-0082
0705-0082
(approximately 7/8”)
3/8”
NPT
ROUND
3/8”
DS-390265
DS-390268
-
DS-390211
DS-390213
NPT
HEX
DS-390208 DS-390208
-
-
PRICE LIST
PART #
0705-0082
2107-0000
2107-0001
DS-390208
DS-390209
DS-390211
DS-390213
DS-390231
DS-390233
SUG. RETAIL
$22.95
110.95
110.95
24.95
98.95
98.95
112.95
110.95
110.95
PART #
DS-390235
DS-390237
DS-390240
DS-390241
DS-390242
DS-390243
DS-390244
DS-390245
DS-390250
SUG. RETAIL
$110.95
124.95
110.95
110.95
110.95
113.95
110.95
98.95
110.95
PART #
DS-390251
DS-390252
DS-390253
DS-390254
DS-390255
DS-390258
DS-390260
DS-390261
DS-390262
SUG. RETAIL
$110.95
110.95
113.95
110.95
98.95
101.95
110.95
110.95
110.95
PART #
DS-390263
DS-390264
DS-390265
DS-390268
DS-390506
DS-390507
DS-390509
DS-390510
SUG. RETAIL
$113.95
110.95
98.95
101.95
110.95
110.95
110.95
110.95
SECTION
15
WINDSHIELDS
CHOPPER VALVE
HIGH-FLOW FUEL VALVE
WITH CUSTOM ROUND KNOB
•Custom knob features a detent for positive “on” position
with ball-milled grooves that gives the valve a nice grip and a
custom look
•Substantially higher fuel flow than OEM or aftermarket
fuel valves
•Very universal; will work in any tank location
•Valve features a brass body with show-quality
chrome plating
•Easy-to-read on, off and reserve positions
PART #
DESCRIPTION
SUG. RETAIL
0705-0033
22mm round; 180° outlet facing inward
$115.95
VACUUM FUEL VALVE
2107-0002
•Has the highest fuel flow of any
vacuum-style fuel valve on the market
•The same safety feature as OEM
vacuum fuel valves – when valve is left
in the “on” position with the motor
off, fuel flow is shut off automatically
•High-quality, lustrous chrome finish is
the same as Pingel’s Power-Flo line of
fuel valves
•Fits all 94-06 stock applications with
22mm external thread
•Will also fit 75-93 models if a vacuum
source is tapped
•Outlet is a single 5/16” hose barb and
will accept the stock vacuum line
POWER-FLO™
-6AN FUEL VALVE
PART #
DS-390285
0705-0085
PART #
DESCRIPTION
HEX STYLE
2107-0002 Left side mount, outlet facing forward; or right
side mount, outlet facing back
2107-0003 Left side mount, outlet facing back; or right side
mount, outlet facing forward
2107-0004 Universal configuration, outlet facing down
ROUND STYLE
0705-0083 Left side mount, outlet facing forward; or right
side mount, outlet facing back
0705-0084 Left side mount, outlet facing back; or right side
mount, outlet facing forward
0705-0085 Universal configuration, outlet facing down
PART #
DS-390225
DS-390226
111.95
33.95
DS-390285
ELECTRICAL
DS-390504
LIGHTING
178.95
178.95
HANDLEBARS,
CONTROLS
& MIRRORS
178.95
0705-0051
178.95
178.95
CABLES
THE GUZZLER®
FUEL VALVES
•This is a serious fuel valve for
serious riders
•Hardcoat anodized billet
aluminum and stainless
steel construction
•Spring-loaded detents for
DS-390501 0705-0028
positive on-off positioning;
no reserve available
•Flows up to 211 ounces of fuel per minute
•Available with 3/8” NPT or 22mm outlets (all single outlets
face down)
•Some styles available highly polished for that custom look
SUG. RETAIL
$82.95
DS-390225
DS-390226
DESCRIPTION
Fuel valve rebuild kit, complete
Fuel valve rebuild components only
FUEL/AIR
SYSTEMS
$141.95
$178.95
FUEL VALVE REBUILD KIT
NOTE: These kits are not designed
for hose outlet down, dual or triple
outlets, 1/4” NPT or race valves. Pingel
recommends these valves be sent
directly to them for rebuilding.
EXHAUST
GASKETS
& SEALS
SUG. RETAIL
0705-0029
•Designed with the bike builder in mind
•Eliminates the need to worry about fuel valve location
•Simple on/off valve without reserve or filter
•Designed to rebuild Pingel
3/8” NPT and 22mm
single-outlet valves
•PART #DS-390225 includes all
the special tools necessary,
photos, instructions and enough
components to rebuild three
fuel valves
•PART #DS-390226 includes enough
components to rebuild five fuel
valves; does not include any of
the tools
•A bench vise or press with a 61/2”
or larger opening is necessary for
installing a rebuild kit
DS-289141
SEATS &
SISSY BARS
SUG. RETAIL
IN-LINE CUSTOM FUEL VALVE
DESCRIPTION
In-line fuel valve
0705-0058
LUGGAGE
TRANSMISSION
& DRIVELINE
DS-289141
DESCRIPTION
For 75 and later model tanks
with 22mm external threads
For pre-75 models and custom
tanks with 3/8 NPT fitting
-6AN fuel fitting
TOURING
ENGINE
0705-0058
•Chrome-plated solid brass
hex-design petcock features
a -6AN outlet
•For use with S&S E and G
series carbs
•Fitting sold separately
NOTE: All descriptions are made from a seated position
on the motorcycle with a reference from outlet position to the reserve
position of the fuel valve lever.
PART #
0705-0032
•Designed for use on bikes with
custom fuel tanks that are raised
high in front, which doesn’t allow
proper fuel pickup with a standard
reserve fuel valve
•Keeps the bottom of the tank clean from fuel lines,
giving universal options for mounting the fuel valve
with mounting holes on the back of the valve
•Smooth, clean lines with a compact design that
measures 11/2” H x 2” L x 13/8” D
•Easy-to-operate position selector knob with a ball detent for positive
on/off/reserve locating
•Two straight out 5/16” hose outlets
•Requires two hoses to be routed from the tank: one for on and one
for reserve
•Provides exceptional fuel flow to feed the thirstiest big-inch motors
•CNC-machined from billet brass, polished and chromed
PART #
DESCRIPTION
SUG. RETAIL
0705-0042
Chopper valve
$195.95
SUG. RETAIL
$62.95
75.95
PART #
22MM POLISHED
0705-0049
0705-0050
0705-0051
0705-0052
22MM
DS-390503
0705-0029
DS-390504
DS-390505
3/8” NPT POLISHED
0705-0047
0705-0056
3/8” NPT
DS-390501
0705-0028
DS-390502
5/16” INLINE POLISHED
0705-0057
DESCRIPTION
5/16”
BRAKES
TANKS &
OIL FILTERS
0705-0047
SUG. RETAIL
Dual 90°
outlets
Single -6AN outlet
5
Single /16” outlet
Single 3/8” outlet
$171.95
165.95
155.95
155.95
Dual 90° 5/16” outlets
Single -6AN outlet
173.95
144.95
155.95
155.95
Single -6AN outlet
142.95
154.95
Dual 90° 5/16” outlets
Single -6AN outlet
159.95
132.95
141.95
132.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
897
SECTION
15
WINDSHIELDS
0705-0014
TOURING
LUGGAGE
0705-0015
0705-0016
0705-0089
0705-0019
0705-0017 0705-0018
0705-0020 0705-0021
0705-0061
0705-0022
0705-0064
0705-0023
“CLICK-SLICK” PETCOCKS
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
•Manufactured from 360 brass and stainless steel ball bearings and components; available in either a chrome or raw brass finish
•Features detents for quick, effortless switching from “On” to “Reserve” to “Off”
•90° movement between each detent ensures positive transition when riding
•Stainless steel internal ball bearings provide virtually friction-free petcock handle motion
•Valve position firmly held in place and unaffected by vibration
•Can be modified to fit custom tanks and/or be set to determine amount of reserve gas available with any custom gas tank
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
3/8” NPT CHROME
3/8” NPT RAW BRASS (CONT)
22MM CHROME (CONT)
Straight facing
0705-0014
Backward facing
$107.95 0705-0087
Downward facing
$107.95 0705-0022
6-AN
0705-0015
Downward facing
107.95 0705-0088
Forward facing
107.95 0705-0023
0705-0016
Forward facing
107.95 0705-0089
Straight facing
107.95 22MM RAW BRASS
0705-0061
Backward facing
0705-0017
Straight facing
107.95 22MM CHROME
Downward facing
0705-0018
6-AN
114.95 0705-0019
Backward facing
107.95 0705-0062
3/8” NPT RAW BRASS
Forward facing
0705-0020
Downward facing
107.95 0705-0063
Straight facing
Forward facing
107.95 0705-0064
0705-0086
Backward facing
107.95 0705-0021
0705-0002
HANDLEBARS,
CONTROLS
& MIRRORS
107.95
107.95
107.95
107.95
0705-0004
FUEL PETCOCKS
LIGHTING
$107.95
114.95
0705-0003
GASKETS
& SEALS
ELECTRICAL
SUG. RETAIL
PETCOCK
•Hi-flow petcocks feature a
round, smooth body with
a chrome finish
•Three-position knob (on,
off, reserve) with a 5/16”
fuel outlet
•Fits most stock tanks and
custom tanks with a 22mm outlet
PART #
DESCRIPTION
0705-0002
Inward facing outlet
0705-0003
Down facing outlet
0705-0004
Forward facing outlet
•Constructed from triple show-chrome
plated brass
•Features an adjustable 360° swivel outlet
and clicking detent that allows for accurate
and universal positioning
•Significantly outflows stock and
modified petcocks
SUG. RETAIL
$74.95
74.95
74.95
NOTE: Not for fuel-injected models.
PART #
DESCRIPTION
0705-0081
For stock and custom tanks with
a 22mm outlet
SUG. RETAIL
$79.95
CABLES
BRAKES
HIGH-FLOW FUEL VALVE WITH
SWIVEL SPIGOT
TANKS &
OIL FILTERS
•Chrome fuel valve from Accel is designed to replace
all right, left and rear spigot applications
•Unique design that incorporates a banjo-type spigot
with a 180° swivel onto a high-flow fuel valve with
a 22mm nut
•Fuel outlet nipple is 5/16”
DASHES
& GAUGES
NOTE: Won’t fit 3/8” NPT thread tanks.
PART #
DESCRIPTION
5106
High-flow fuel valve
w/ swivel spigot
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-390216
DS-390218
DS-390217
HARDWARE,
CHEMICALS
& TOOLS
898
$100.95
•Features on, off and reserve with an easy-to-use knob, 5/16” barbed fuel
outlet and a fine wire-mesh screen
•Valve has 3/8” NPT threads and comes with the 3/8” NPT to 22mm
adapter nut
•Fits all fuel tanks with 22mm outlet
PART #
DESCRIPTION
SUG. RETAIL
5105
Accel high-flow petcock w/ nut
$80.95
CHROME PETCOCKS
TIRES,
TUBES &
WHEELS
COVERS,
SECURITY
& GENERAL
SUG. RETAIL
HIGH-FLOW CHROME PETCOCK
DS-390219
•Includes filter screen, three-position control and high fuel flow
•Available with 3/8” NPT or 22mm thread fittings, straight
or 90° outlet
•All are sold each
PART #
DESCRIPTION
3/8” NPT
DS-390216
For stock H-D gas tanks through 74 or custom tanks;
straight x 5/16” rib spigot
DS-390217
For stock H-D gas tanks through 74 or custom tanks;
90° x 5/16” rib spigot
DS-390214
For stock H-D gas tanks through 74 or custom tanks,
straight x 5/16” rib spigot
22MM
DS-390218
Straight spigot; repl. OEM #s 62166-81, 62168-81
DS-390219
90° spigot; repl. OEM #62167-81
SUG. RETAIL
$21.95
21.95
21.95
21.95
21.95
SECTION
BIG TWIN VALVE
ADAPTER
0705-0005
Back
view
Front view
Back
view
0705-0059
Front view
FUEL TANK SELECTORS
•Custom-mounts the fuel valve at any location
•Ideal for custom builds and choppers where the
bottom of the fuel tank shows
•Keeps fuel tank bottom clear of hoses or the petcock;
allows you to get all the fuel out of raised front or stretched tanks
by running hoses from the very low end of the fuel tank
•Needs two fuel hoses routed from gas tank: one for on and one for
reserve (hoses sold separately)
PART #
DESCRIPTION
0705-0005
Tank selector w/ face plate
0705-0059
Tank selector w/ one-hole bracket
245.95
0705-0060
Tank selector w/ two-hole bracket
245.95
•Offers better fuel
flow and retains the
stock crossover connection of your
35-65 Harley-Davidson split fuel tanks
•Don’t let the stock fuel valve be the
main jet – the stock fuel valve setup
simply cannot support the fuel
demands of today’s high-performance engine
•Stainless steel gas tank adapter and any 22mm
threaded Pingel Power-Flo or Guzzler fuel valve
(sold separately) will drastically improve your fuel supply
PART #
DESCRIPTION
0705-0053
For 35-65 Big Twin split fuel tanks
WINDSHIELDS
Stock
valve
Stock valve
w/ adapter
SUG. RETAIL
$42.95
TANK FITTING KIT FOR
FUEL-INJECTION TO
CARBURETOR CONVERSION
PART #
DESCRIPTION
SUG. RETAIL
0705-0027
For all 95-02 Buell models, except fuel-injected models
$29.95
FUEL TANK OUTLET PLUG
•Use when converting from OEM
fuel-injection systems to use
a carburetor in order to deliver adequate
fuel for large-displacement engines
0705-0030
•Kit replaces the factory tank fittings,
allowing the use of a high-quality, high-flow
Pingel fuel valve to feed the carburetor
•Made of stainless steel
•Kits include adapter and plug or adapter only with O-rings or gaskets
•See Pingel fuel valves on page 896
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
NOTE: Due to tight tolerances in the tank fittings, a Pingel fuel valve
is the only one that will fit.
PART #
DESCRIPTION
0705-0031
0705-0055
0705-0030
For 00-03 models w/ Delphi EFI (adapter and plug)
For 00-09 models w/ Delphi EFI (adapter only)
For 95-01 FLT/FLHT models w/ Magneti Marelli EFI
(adapter and plug)
PART #
DESCRIPTION
PETCOCK ADAPTER
0705-0054
Fuel tank outlet plug
$14.95
SUG.
RETAIL
$42.95
24.95
42.95
•Allows the use of a 22mm
petcock in a fuel tank designed
for Delphi fuel injection
•Original equipment in 01-06 FXSTD Deuce, 03-06 Dressers
and 04-06 Softail carbureted bikes
•Includes O-ring for a leak-proof seal
•Accepts any petcock that installs using a 22mm nut
•Chrome-plated finish for great looks
PART #
DESCRIPTION
•Shut-off rod and seat assembly; features a left tank reserve
0705-0024
Petcock adapter; repl. OEM #62842-00
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
SUG. RETAIL
$16.95
BRAKES
NOTE: Fits earlier models if Linkert gas line is changed to 50-65 style.
DESCRIPTION
DS-390205
For 50-65 Big Twin models; repl. OEM #62033-41
SUG. RETAIL
$33.95
TANKS &
OIL FILTERS
FUEL LINE
FITTING COVER
GAS VALVE FITTING KIT
•Chrome-plated valve fitting kit is
designed to use flexible hoses
•Streamlined, two-piece
cover adds a touch
of chrome
PART #
DESCRIPTION
0706-0037
For fuel-injected 01-07 Softails, 02-07 FLT, FLHT and FLHR
fuel-injected models and 04-07 fuel-injected Dyna models
SUG. RETAIL
NOTE: Not for Linkert carb.
PART #
$39.95
DASHES
& GAUGES
DESCRIPTION
SUG. RETAIL
DS-193807 Stock 35-65 FL models (also fits Drag Specialties repl. gas valves)
$20.95
CUSTOM
PETCOCK COVERS
•Highly detailed,
die-cast construction
•Designed for sidemount flat lever
OEM-style petcocks
•Held in place by a stainless setscrew
•Available in gold or chrome finish
PETCOCK
COVER
•Highly decorative
chrome cover
offers a unique custom look
•Large hex knob provides easy operation
•Installs quickly over OEM petcock
•Fits 81-01 OEM petcocks
PART #
DESCRIPTION
DS-390359
Petcock cover
ELECTRICAL
LIGHTING
GAS VALVE
PART #
SEATS &
SISSY BARS
FUEL/AIR
SYSTEMS
•Use to plug the outlet on fuel
tanks that use either the fuelinjection or petcock adapter
•Also for use on aftermarket fuel tanks that have dual fuel
outlets, but only one is required for use
•Polished chrome finish
•Includes O-ring seal
•Fits OEM and aftermarket fuel tanks that accept petcock adapter OEM
#62842-00 (Drag PART #0705-0024)
SUG. RETAIL
LUGGAGE
EXHAUST
$222.95
•Allows the
mounting of any
22mm Pingel® fuel valve on Buell models
•Bolts in place of the stock fuel valve
•A must for modified motors that need
a higher-flow-rate fuel valve
•Fuel valve must be purchased separately
TOURING
0705-0055
SUG. RETAIL
FUEL VALVE
ADAPTER
15
SUG. RETAIL
$29.95
PART #
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-390516
DESCRIPTION
GOLD
DS-390516 Eagle for 81-01 OEM petcock
CHROME
DS-390360 Skull w/ chrome eyes for 81-01
OEM petcock
DS-390361 Skull w/ ruby eyes for 81-01 OEM petcock
SUG.
RETAIL
$50.95
46.95
DS-390360
PART #
0705-0011
0705-0012
DESCRIPTION
CHROME (CONT)
0705-0010 Skull for 02-06 OEM petcock
0705-0011 Skull w/ ruby for 02-06 OEM petcock
0705-0012 Skull for Pingel petcock
0705-0013 Skull w/ ruby for Pingel petcock
57.95
SUG.
RETAIL
$57.95
68.95
57.95
68.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
899
SECTION
15
WINDSHIELDS
IN-LINE FUEL FILTERS
TOURING
LUGGAGE
SEATS &
SISSY BARS
•Pingel® high-flow custom fuel filters are available in
aluminum machined satin or chrome finish
•Filters have a high-quality O-ring for a leak-proof seal
•Cleanable, reusable 40 micron filter element
•13/16” body length; 11/2” o.d.
•Works great with Pingel’s high-volume gas valves
0707-0008
0707-0005
PART #
DESCRIPTION
SUG. RETAIL
0707-0005 3/8” aluminum machined satin finish fuel filter (ea.)
$28.95
0707-0006 3/8” aluminum chrome finish fuel filter (ea.)
34.95
0707-0007 -6AN aluminum machined satin finish fuel filter (ea.)
38.95
0707-0008 -6AN aluminum chrome finish fuel filter (ea.)
44.95
PART #
DS-391662
DS-391663
DS-391666
DS-391662
DS-391666
DESCRIPTION
SUG. RETAIL
5/16” chrome fuel filter (ea.)
$38.95
5/16” aluminum machined satin fuel filter (ea.)
32.95
Repl. 40 micron bronze filter element w/ O-ring (ea.)
12.95
EXHAUST
DS-391103
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
DS-391101
PEAK FLOW FUEL FILTERS
•Machined from 6061 T-6 billet aluminum, then polished and chrome-plated
•Filter element is made from pleated 304 stainless steel; filters down to
10 microns and still flows 6 gal. a minute
•Mini filter body measures 13/4” L; super mini body measures 7/8” L (less fittings)
•Replacement filter element available
MINI FILTER
PART #
DS-391102
DS-391103
DS-391104
DESCRIPTION
1/4” fittings
5/16” fittings
3/8” fittings
SUG. RETAIL
$46.95
46.95
46.95
PART #
DS-391105
DS-391106
DS-391105
DESCRIPTION
#4 AN fittings
#6 AN fittings
SUG. RETAIL
$46.95
46.95
SUPER MINI FILTER
PART #
DESCRIPTION
SUG. RETAIL
$43.95
DS-391100 1/4” fittings
DS-391101 5/16” fittings
43.95
DS-391107 Repl. filter element (ea.)
14.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
ANODIZED FUEL FILTERS
ANODIZED ALUMINUM FUEL FILTERS
•Premium-quality custom Russell fuel filters with
alloy cases and replaceable bronze elements
•Compact size for easy
installation; available in
two sizes and several colors
PART #
45000
45010
45020
45030
45060
DESCRIPTION
1/4”, chrome
1/4”, red
1/4”, blue
1/4”, black
5/16”, chrome
SUG.
RETAIL
$15.95
15.95
15.95
15.95
15.95
PART #
DESCRIPTION
5/16”, red
45070
5/16”, blue
45080
5/16”, black
45090
DS-391708 Repl. fuel
filter element
SUG.
RETAIL
$15.95
15.95
15.95
6.95
•Customize and protect with the same filter
•CNC-machined aluminum outer case
•Cleanable brass filter element inside
•Available in 1/4” and 5/16” sizes
SUG.
PART #
DESCRIPTION
RETAIL PART #
$7.95 14-34430
14-34470 Red 1/4”
14-34471 Blue 1/4”
7.95 14-34431
14-34472 Black 1/4”
7.95 14-34432
7.95 14-34433
14-34473 Purple 1/4”
14-34474 Gold 1/4”
7.95 14-34434
DS-391673
DS-391674
DESCRIPTION
Red 5/16”
Blue 5/16”
Black 5/16”
Purple 5/16”
Gold 5/16”
SUG.
RETAIL
$7.95
7.95
7.95
7.95
7.95
DS-391672
DASHES
& GAUGES
DS-391675
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
14-34450
14-34460
& LICENSE
PLATE FRAMES UNIVERSAL FUEL FILTERS
•Sizes to fit 1/4” or 5/16” fuel lines
TIRES,
•Glass fuel filters have glass body
TUBES &
with chrome end caps; include hose clamps and spare
nylon filter element
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
900
•Metal high-performance fuel filters feature brass filter
element, all-metal casing and hose clamps
PART #
14-34450
14-34460
14-34451
14-34461
14-34455
DESCRIPTION
5/16” glass filter
5/16” metal filter
1/4” glass fuel filter
1/4” metal filter
Repl. filter (10-pk.)
SUG. RETAIL
$8.95
7.95
8.95
7.95
.95 (ea.)
DS-391671
DS-391676
CLEAR FUEL FILTERS
•Glass filters feature chrome ends
•Available in two inlet sizes 1/4” or 5/16” i.d.,
and in mini (13/8”) and standard (23/8”) lengths
•Replacement filter elements available
PART #
DESCRIPTION
MINI FILTERS
1/4” inlet
DS-391673
5/16” inlet
DS-391671
PART #
REPLACEMENT ELEMENTS
DS-391675
DS-391676
SUG. RETAIL
$10.95
10.95
PART #
DESCRIPTION
STANDARD FILTERS
1/4” inlet
DS-391674
5/16” inlet
DS-391672
DESCRIPTION
Short
Long
SUG. RETAIL
$10.95
10.95
SUG. RETAIL
$2.95
2.95
SECTION
15
WINDSHIELDS
0706-0005
FUEL TANK
CROSSOVER LINES
•Replaces the stock rubber
lower crossover lines with
stainless steel lines
•Seals with compression fittings for a positive seal
FUEL-INJECTION LINES
•Huge upgrade over the drab
stock kit
•Lines are stainless steel braided
•Chromed hard line and fittings
resistant to all chemicals found
in gasoline
PART #
CROSSOVER LINES
0706-0007
0706-0004
0706-0005
0706-0006
0706-0003
REPLACEMENT WASHER
0706-0016
SUG.
PART #
DESCRIPTION
RETAIL
HDFL005 Fuel-injection line for
95-99 FLHTCU-I, 98-99
FLHRC-I, 98-99 FLTRI, 96-99 FLHTC-I, 96
FLTCU-I, 96-97 FLHR-I $159.95
DESCRIPTION
For
For
For
For
For
97-09
00-09
00-07
86-99
93-05
TOURING
0706-0016
SUG. RETAIL
FLT/FLHT models
FXST/FLST models (except Deuce)
FXSTD
FXST/FLST models
Dyna models
$26.95
26.95
26.95
28.95
26.95
For fuel lines (6-pk.)
.95
STERLING CHROMITE® II
FUEL TANK CROSS-OVER LINES
•Only Sterling Chromite® II uses the patented
technology to create an exclusive braid that
looks like chrome
•Perfectly matches color and weave of all other Magnum
Sterling Chromite II cables and lines
•High-quality clear covering won’t discolor and makes
cleaning easy
•Polished chrome-plated ends
•Complete compression-style line assemblies
•Unique design eliminates leaks
PART #
0706-0024
0706-0025
0706-0026
0706-0027
0706-0028
0706-0029
FITS MODEL
86-99 Softail
00-09 Softail (except Deuce)
00-07 FXSTD
97-09 FLT/FLHT/FLHR
03 Dyna
04-09 Dyna
LENGTH INCLUDING FITTINGS
111/2”
51/2”
7”
101/2”
51/4”
53/4”
SUG. RETAIL
$44.95
44.95
44.95
44.95
44.95
44.95
PART #
0706-0008
•Stainless steel braided #3 line
•Two chrome 90° fittings
•For use with custom tanks
•Available in 6” or 9” lengths
DESCRIPTION
Crossover kit
PART #
0706-0059
0706-0060
DESCRIPTION
6”
9”
SUG. RETAIL
$28.95
29.95
SUG. RETAIL
$44.95
7807-0103
•Braided stainless
steel hose features
5/16” i.d. for maximum fuel flow
•Attach to crossover tubes with compression
fittings for a positive seal – no more worm
gear clamps
SUG.
PART #
DESCRIPTION
RETAIL
$41.95
0706-0010 For 99-05 Dyna, 53/4”
39.95
0706-0011 For 86-99 FXST/FLST, 103/4”
0706-0012 For 00-09 FXST/FLST, 51/2”
(except FXSTD)
34.95
0706-0031 For 00-07 FXSTD
33.95
0706-0030 For 97-09 FLT
41.95
DS-096648 Universal stainless steel
crossover fuel line (not
for FXR and Dyna) for 1/4”
45.95
outlets, 111/2”
DS-222617 Repl. seals for crossover
fuel line (6-pk.)
7.95
7807-0104
0710-0041
7807-0102
•Designed to work with
Pingel Power-Flo™ fuel valve PART #DS-390285
or any other fuel valve with a 6-AN fitting
•Black anodized 6-AN Swivel-Seal™ hose ends
are available in straight or 90° styles
•Auto-Flex™ stainless hose is available
in 3-ft. lengths
•Hose ends and hose sold separately
PART #
DESCRIPTION
SUG. RETAIL
7807-0102 Auto-Flex stainless hose
$25.95
7807-0103 Straight Swivel-Seal
hose end (ea.)
11.95
7807-0104 90° Swivel-Seal hose
end (ea.)
36.95
•Bolt-on oil tank with a custom
wraparound look is easily installed
•Made of chromed-finish, heavygauge steel
•Conveniently located drain and chrome
filler cap
•Battery opening measures
73/8” L x 43/16” W x 59/16” D
•Features a 3.5 quart capacity with Softail-type
oil line fittings and a two-piece front mounting
bracket for easy installation
•Requires PART #DS-245262 drain plug
PART #
DS-310231
DS-245262
DESCRIPTION
SUG. RETAIL
Oil tank for 65-86 FX/FL
$324.95
Chrome hex-head drain
1
2.95
plug, /8” NPT
ENGINE
TRANSMISSION
& DRIVELINE
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
SMOOTH-STYLE
CUSTOM OIL TANK
STAINLESS BRAIDED
HOSE AND 6-AN
HOSE ENDS
EXHAUST
GASKETS
& SEALS
FUEL LINE
CROSSOVERS
FUEL LINE
CROSSOVER
FOR CUSTOM
TANKS
•Braided stainless steel,
9” long
•Allows equal gas flow to both sides of tank
1
• /8” pipe thread fittings to tank and -3 chrome
AN 90° hose ends
•For use with custom tanks that have 1/8” NPT
bungs in the bottom of the tank
SEATS &
SISSY BARS
FUEL/AIR
SYSTEMS
DS-096648
CUSTOM
FUEL LINE
CROSSOVER KIT
LUGGAGE
FOOTRESTS
& LICENSE
PLATE FRAMES
0710-0040
TIRES,
TUBES &
WHEELS
CUSTOM OIL TANKS
•3.5 quart capacity oil tanks in
a chrome finish
•Features a 1/4” pipe feed and
return and 1/8” pipe vent
•Center fill design
•Measures 6” in dia. and 111/2” W
PART #
DESCRIPTION
FOR 84-99 FSXT/FLST
0710-0040
Round
0710-0041
Domed
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$295.95
295.95
COVERS,
SECURITY
& GENERAL
901
SECTION
15
WINDSHIELDS
WINGED
FXST/FLST
OIL TANK
TOURING
LUGGAGE
SEATS &
SISSY BARS
•Fat Guy winged oil tank for
custom frames
•Also fit stock 84-99 FXST/
FLST models with minor
modification (frame plate
must be notched for
center fill hole)
•125/8” wide
•Raw finish
OIL TANK
•4-qt. oil tank for
Pro-Maximus frame
•Raw finish
PART #
0710-0004
DESCRIPTION
Oil tank
SUG. RETAIL
$506.95
PART #
DESCRIPTION
FOR CHOPPER GUYS FXST/FLST AND RIGID FRAME KITS
DS-360265
Winged standard internal feed oil tank
SUG. RETAIL
$487.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
WINGED
TOP MOUNT
OIL TANK
CHOPPER-STYLE
OIL TANK
•Features a top-mount design
with internal feed lines
•31/2-qt. raw finish tank has
a flat bottom, with plenty
of room for the starter
•Fits all Chopper Guys Rigid
frames and
custom applications
•Available with
a standard
internal feed
•Has a raw finish
and a top center
filler hole
•For use in custom
applications
PART #
DS-360432
DESCRIPTION
Winged standard feed oil tank
ELECTRICAL
SUG. RETAIL
$487.95
PART #
DS-310232
0710-0021
DASHES
& GAUGES
DESCRIPTION
For 89-99 Softail models
SUG. RETAIL
$199.95
DS-310109
CUSTOM OIL TANKS
TANKS &
OIL FILTERS
SUG. RETAIL
$487.95
•Features chrome
finish and a winged
design that fills
the gap between
the tank and frame
•Includes filler cap
and drain plug
HANDLEBARS,
CONTROLS
& MIRRORS
BRAKES
DESCRIPTION
Chopper-style oil tank
CENTER-FILL
WINGED
OIL TANK
0710-0022
LIGHTING
CABLES
PART #
0707-0002
•Chrome-plated steel construction
•Includes mounting tabs
•Available in side or center fill
•Domed ends
•Designed with built-in battery box
PART #
DESCRIPTION
FOR 84-99 FXST, FLST AND CUSTOM RIGID FRAMES
0710-0021
Center fill
0710-0022
Side fill
SUG. RETAIL
$319.95
319.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
902
CHROME
WINGED
OIL TANK
DS-350150
•Winged design fills
in the gap between
tank and frame
•Features a side-fill
design oil spout
•Includes oil filler cap
and drain plug
PART #
DS-310113
DESCRIPTION
For 89-99 Softail models
CHROME OIL TANK
•Features a side-fill design
•Includes oil filler plug
PART #
DS-310109
SUG. RETAIL
$214.95
DS-350150
DESCRIPTION
Oil tank for 89-99 Softail models;
repl. OEM #62498-89A
Repl. oil filler plug (ea.)
SUG. RETAIL
$199.95
7.95
SECTION
15
WINDSHIELDS
CHROME OIL TANKS
•A duplicate of the original equipment black oil tank,
but this is highly polished and chrome-plated for
exceptional looks
•Includes filler cap
PART #
0710-0046
DS-310119
DS-310102
DESCRIPTION
For 97-03 XL: repl. OEM
#62475-97/62888-99
For 94-96 XL; repl. OEM #62475-94
For 83-93 XL; repl. OEM #62475-83
SUG.
RETAIL
TOURING
LUGGAGE
DS-310102
$149.95
144.95
133.95
SEATS &
SISSY BARS
DS-310119
EXHAUST
FUEL/AIR
SYSTEMS
FXR
OIL TANK
ENGINE
•Formed steel construction
with a chrome finish
•Bolt-in application;
uses OEM mounts
•Fittings, clamps
and hoses included
TRANSMISSION
& DRIVELINE
NOTE: Cap not
included; must be
purchased separately.
OIL TANK
PART #
DESCRIPTION
0710-0003 For 86-94 FXR and most aftermarket FXR frames
SUG.
RETAIL
$133.95
GASKETS
& SEALS
•Replacement chrome oil tank comes with
drain/fill plugs, cap assembly and gasket
PART #
DS-310108
DESCRIPTION
For 65-E82 FX, FL; repl. OEM #62483-81
SUG. RETAIL
$167.95
ELECTRICAL
LIGHTING
0710-0015
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
0710-0013
0710-0028
TANKS &
OIL FILTERS
OVAL ALUMINUM OIL TANKS
•Available with center- or side-fill holes
•Feature a built-in battery box that measures 7” L x 4” W
•Accept 1/8” NPT fittings (sold separately)
•Mount in the same manner as a FXST/FLST oil tank
DASHES
& GAUGES
NOTE: Filler cap not included; uses 84-99 FXST/FLST-type cap.
PART #
DESCRIPTION
SUG. RETAIL
FOR LEFT-SIDE DRIVE 84-99 CUSTOM FXST/FLST/ RIGID FRAMES (11.5” W)
0710-0013
Retro finish, center fill
$969.95
0710-0015
5” round, smooth,
center fill
655.95
PART #
DESCRIPTION
FOR 00-09 FXST/FLST MODELS EXCEPT 08 FXCW/FXCWC
(OEM REPLACEMENT)
0710-0027
Smooth, side fill
0710-0028
Maltese Cross, side fill
SUG. RETAIL
$969.95
969.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
OIL FILLER HOUSING KIT
HARDWARE,
CHEMICALS
& TOOLS
•Chrome die-cast aluminum housing
•Comes complete with fitting, gasket,
hardware and rubber hose
•Converts 93-98 breather style to late-model method of breathing
•Uses OEM dipstick
PART #
7805-3032
DESCRIPTION
For 93-06 FLT, FLHT; repl. OEM #s 62419-93, 62470-02
SUG.
RETAIL
$49.95
COVERS,
SECURITY
& GENERAL
903
SECTION
15
1105-0028
WINDSHIELDS
TOURING
PLUS ONE OIL PAN
•Reduces engine oil temperature by 10 degrees on an
80 degree day
•Multiple integral baffles eliminate the stock plastic baffle with springs
•Baker +1 pan has the feed located in the rear and the return in the front
for a more complete system circulation
•Structurally located integral boss for Alloy Art TXR stabilizer
•2-piece is constructed of billet aircraft grade 6061 T-6 aluminum
•1-piece pans are Cast A356 T-6 and available in silver or black
PART #
DESCRIPTION
SUG. RETAIL
FOR 99-08 FLT/FLHT/FLHR/FLHX/FLTR MODELS
1105-0025 2-piece billet; chrome
$999.95
1105-0027 1-piece; silver
499.95
1105-0028 1-piece; black
499.95
LUGGAGE
SEATS &
SISSY BARS
PART #
DESCRIPTION
SUG. RETAIL
FOR 93-98 FLT/FLHT/FLHR/FLHX/FLTR MODELS
1105-0026 2-piece billet; chrome
$999.95
1105-0029 1-piece; silver
499.95
1105-0030 1-piece; black
499.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
TANK BRACKET SET
& DRIVELINE OIL
•Replace the dull front and rear oil tank bracket
GASKETS
& SEALS
ELECTRICAL
on your late-model Softail with these
chrome brackets
NOTE: Rear bracket requires
mount on 93-99 models.
5/16”-24
x5/8”
PART #
DESCRIPTION
DS-310255 For 84-99 Softail; repl. OEM
#62704-84 (rear), 62707-84
(front)
OIL TANK-TO-FENDER BRACKET
bolts to
SUG.
RETAIL
•Chrome bracket mounts horseshoe-type oil
tanks to rear fenders on hardtail and
custom frames
PART #
DS-310298
$26.95
DESCRIPTION
Tank-to-fender bracket;
repl. OEM #62585-36
OIL TANK EDGING TRIM
•Replacement-type, chrome edging trim
SUG.
RETAIL
$6.95
PART #
DESCRIPTION
DS-310225 For 71-86 FX and FXB
and 65-84 FL and FLH;
repl. OEM #62534-65
SUG. RETAIL
$11.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
VIBRATION
MOUNTS
•For battery boxes,
oil tanks or
custom parts
•Meet or exceed all
OEM specifications
7805-3030
PART #
2404-0032
TANKS &
OIL FILTERS
DASHES
& GAUGES
DESCRIPTION
Repl. OEM #69123-92;
features two 5/16”-18
studs, each 1/2” long
DS-350145-PK Repl. OEM #62563-65;
1/4”-20 threaded studs
and steel side plates; for
mounting battery boxes
and oil tanks (5-pk.)
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
904
SUG.
RETAIL
$7.95
2.95
TOP OIL TANK BRACKET GROMMET
•Rubber grommet with metal sleeve
•Sold each to the consumer; sold to dealers in
packs of 10
LCD OIL TEMPERATURE GAUGES
•Billet aluminum with liquid crystal display
•Push-button readout with automatic shutoff
PART #
DESCRIPTION
SUG. RETAIL
DS-391240 Repl. OEM #s 11447
(grommet) and
5775 (sleeve)
$1.95 (ea.)
PART #
0710-0033
7805-3042
7805-3030
DESCRIPTION
For 00-09 FXST, FLST
For 84-03 XL models
SUG. RETAIL
$89.95
89.95
89.95
DS-330033
0710-0001
DS-330039
0710-0047
0710-0002
OIL DIPSTICKS
•Billet machined
aluminum with a chrome finish
•Caps feature knurled edges to allow
a good grip
•Plastic dipsticks have all required markings
•Come with sealing gaskets
DS-330031
OIL PLUG TEMP GAUGE
SUG.
RETAIL
PART #
DESCRIPTION
0710-0001 For 91-98 FXD; 93-98 FXDWG,
$38.95
0710-0002 For 93-98 FLT/FLHT; repl. OEM
#s 62640-93, 62607-93
25.95
•Sensitive to oil temperatures up to 350°F
•Chrome gauge bezel
PART #
DS-330039
DS-330033
DS-330031
0710-0047
DESCRIPTION
For all 00-09 FXST/FLST models
For 84-99 FXST, FLST; 82-94 FXR; 80-92 FLT; 79-01 XL (23/4” L)
For FX, FL, FXWG (37/8” L)
For 04-09 XL
SUG. RETAIL
$28.95
28.95
28.95
55.95
0710-0007
OIL PLUG
•Billet aluminum oil plug
matches 1.5” pop-up
gas cap
•Fits most stock and custom side-fill tanks
PART #
0710-0032
SECTION
15
WINDSHIELDS
ALUMINUM OIL
TANK PLUGS
DESCRIPTION
SUG. RETAIL
Maltese Cross, black
powder-coat
$99.95
•CNC-machined aluminum
six-gun oil caps
•.44 magnum style
•Available in polished push-in style
CHROME OIL
TANK CAP
PART #
0710-0006
0710-0007
•Chromed steel cap
fits OEM oil tanks
SUG.
PART #
DESCRIPTION
RETAIL
DS-350151 Oil tank cap for
65-E82 Big Twin and 52-78 XL;
$33.95
DS-174813 Oil tank top gasket for 66-82
Big Twin; repl. OEM #626281.95
66 (10-pk.)
(ea.)
TOURING
LUGGAGE
0710-0006
DESCRIPTION
For 00-09 FXST/FLST; measures 1 5/16” dia.
For 65-99 HD (except FLT and Dyna) and most
aftermarket tanks, measures 1 3/16” dia.
SUG. RETAIL
$50.95
50.95
SEATS &
SISSY BARS
EXHAUST
DS-350151
TRIDENT OIL FILLER CAP
FUEL/AIR
SYSTEMS
•Die-cast cap is chrome plated
•Replaces the stock black oil cap
•Easy to install and use
SUG.
PART #
DESCRIPTION
RETAIL
0710-0048 For 93-06 Touring models
and 99-05 Dyna models
$29.95
ALUMINUM
DIPSTICK CAPS
•CNC-machined
aluminum six-gun oil caps
•.44 magnum style
0710-0005
•Replace the sleeve that comes
with the stock cap so dipstick can still be used
•17/16” i.d.
•Available in polished or anodized black finish
ENGINE
TRANSMISSION
& DRIVELINE
0710-0059
0710-0012
GASKETS
& SEALS
PART #
DESCRIPTION
FOR 91-05 DYNA GLIDES AND TOURING MODELS
0710-0005
Polished
0710-0012
Anodized black
SUG. RETAIL
0710-0061
0710-0062
$74.95
106.95
ELECTRICAL
7805-0066
0710-0049
LIGHTING
OIL DIPSTICK CAPS
DEAD END OIL
DIPSTICK COVER
•OEM replacement
•Notched design
PART #
0710-0066
DESCRIPTION
For 99-06 Touring and FLHR models
SUG. RETAIL
$36.95
•Chrome-plated CNC-machined aluminum
•Attach to the existing dipstick; replace the OEM
aluminum cap
•Grooved relief allows easy removal of the dipstick
SUG.
PART #
DESCRIPTION
RETAIL PART #
DESCRIPTION
FOR 00-09 FXST/FLST
FOR 99-07 FLHT/FLTR/FLHR
0710-0061 Warrior
$67.95 MODELS (1.5” I.D.)
0710-0062 Ball milled
67.95 7805-0066 Nasty
0710-0059 Reflections
67.95
0710-0049 Crusader Cross
67.95
HANDLEBARS,
CONTROLS
& MIRRORS
SUG.
RETAIL
$34.95
•Let you connect rubber or braided
oil lines to your engine
•Work like compression fittings so no
ugly hose clamps are visible
•Sold as a set of 3
•Simplifies installation of
rubber or braided lines
•Mirror-polished 316
stainless steel
•Sold each
PART #
0711-0083
DESCRIPTION
For all Twin Cam “B” motors
SUG. RETAIL
$54.95
PART #
0711-0059
DESCRIPTION
For all Twin Cam “B” motors
BRAKES
TANKS &
OIL FILTERS
OIL LINE ADAPTERS
OIL LINE ADAPTER
CABLES
DASHES
& GAUGES
SUG. RETAIL
$139.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
0711-0157
OIL LINE FITTING KITS
•For installation of custom oil lines on
Twin Cam B motors
•Available in chrome or black finish
•Use with Russell stainless or black oil lines for a professional look
•Accepts custom oil lines with AN6 and AN8 fittings
PART #
0711-0157
0711-0158
DESCRIPTION
Black
Chrome
TIRES,
TUBES &
WHEELS
OIL TANK
LINE FITTINGS
0711-0158
SUG. RETAIL
$28.95
29.95
•Chrome-plated oil line
fittings are exact duplicates
of original types
•Can be used with braided
stainless steel or stock
rigid steel lines
•Sold in packs of three
PART #
DS-193814
DESCRIPTION
36-64 Big Twin models
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$13.95
COVERS,
SECURITY
& GENERAL
905
SECTION
15
DS-245263
WINDSHIELDS
CHROME MOTOR CASE BREATHER FITTINGS
•Highly polished and plated fittings
•Sold each
TOURING
PART #
DESCRIPTION
FOR ALL 65-92 BIG TWIN MODELS
DS-245263
Straight 1/4” NPT x 3/8” hose
DS-245264
90° 1/4” NPT street elbow (must use w/ PART #DS-245263)
DS-245265
45° 1/4” NPT street elbow (must use w/ PART #DS-245263)
DS-245265
LUGGAGE
DS-245264
SEATS &
SISSY BARS
DS-245257
DS-245250
SUG. RETAIL
$3.95
5.95
7.95
DS-245259
EXHAUST
DS-245205
DS-245200
DS-245258
DS-245252
FUEL/AIR
SYSTEMS
DS-245260
DS-245274
DS-245270
ENGINE
DS-245276
TRANSMISSION
& DRIVELINE
DS-245278
DS-245261
DS-245272
HOSE AND TANK FITTINGS
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
•Chrome finish; sold individually
PART #
DS-245200
DS-245205
DS-245250
DS-245252
DS-245256
DS-245257
DS-245278
DS-245258
DS-245259
DS-245260
DS-245270
DS-245272
DS-245274
DS-245261
DS-245276
DESCRIPTION
45° elbow, 1/8” male NPT to 1/8” female NPT, for oil tanks, master cylinder, etc.
90° elbow, 1/8” male NPT to 1/8” female NPT, for oil tanks, pressure gauges, etc.
SAE inverted flare male connector, 3/16” o.d. tube to male 1/8” NPT, for H-D brake lines, etc.
3/8” union, to splice oil lines, cooler installations, etc.
SAE inverted flare 90° male elbow, 3/16” o.d. tube to male 1/8” NPT, for H-D brake lines, etc.
SAE inverted flare 45° male elbow, 3/16” o.d. tube to male 1/8” NPT, for H-D brake lines, etc.
SAE inverted flare female connector, 3/16” o.d. to female 1/8” NPT, for H-D brake lines, etc.
Male 90° hose connector, 3/8” hose to male 1/8” NPT, for oil tanks, coolers, etc.
Male 90° hose connector, 5/16” hose to male 1/8” NPT, used on oil tanks, gas tanks, etc.
Male 90° hose connector, 1/4” hose to male 1/8” NPT, for oil tanks, coolers, etc.
Male hose connector, 1/4” hose to male 1/8” NPT, for oil tanks, custom fuel tanks, etc.
Male hose connector, 5/16” hose to 1/8” male NPT, for oil tanks, coolers, etc.
Male hose connector, 3/8” hose to 1/8” male NPT, for oil tanks, coolers, etc.
Hex socket plug, 3/8” male NPT, for H-D petcocks, etc.
Hex socket plug, 1/8” male NPT, for custom petcocks, etc.
SUG. RETAIL
$5.95
4.95
2.95
4.95
4.95
5.95
4.95
7.95
6.95
6.95
3.95
3.95
3.95
3.95
2.95
0711-0116
HOSE AND TANK FITTINGS
BRAKES
•Steel with a black chrome finish
•Sold each
0711-0117
0711-0118
TANKS &
OIL FILTERS
PART #
0711-0116
0711-0117
0711-0118
0711-0127
0711-0126
DESCRIPTION
45° fitting, 1/8” male NPT to 1/8” female NPT
Straight Barb fitting, 1/8” male NPT to 3/8” female NPT
90° fitting, 1/8” male NPT to 1/8” female NPT
0711-0130
0711-0131
SUG. RETAIL
$16.95
13.95
14.95
0711-0129
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES OIL TANK BREATHER KITS
•Releases power-robbing pressure from oil tank and crank case; reduces blow-by and stops dipstick blowout
TIRES,
•Promotes proper oil flow and oil tank function
TUBES &
•Braided steel lines and stainless steel fittings; breather line coated with clear PVC
•Gasket, thread sealant, necessary hardware and installation instructions included
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
906
PART #
FOR 99-05 DYNA MODELS
0711-01261
0711-01271
FOR 02-08 FLT MODELS
0711-0130
0711-0131
DESCRIPTION
SUG. RETAIL
Stainless
Black
$120.95
130.95
Stainless
Black
189.95
189.95
PART #
FOR 99-01 FLT MODELS
0711-01282
0711-01292
1
2
DESCRIPTION
SUG. RETAIL
Stainless
Black
Requires removal of transmission/oil tank cover for installation.
Requires removal of dipstick housing for installation.
$120.95
130.95
SECTION
DS-246010
15
DS-246050
WINDSHIELDS
DS-222132
TOURING
STAINLESS STEEL
BRAIDED ROCKER
OIL LINES
LUGGAGE
CHROME ROCKER OIL LINES
•Stainless steel braided
oil line sets are leakproof
and designed for
high-pressure applications
•Each set includes crossover and
crankcase-to-rocker box lines
PART #
DS-222132
DS-222133
•Chromed steel overhead oil line sets
include crossover line and
crankcase-to-rocker box line
•Complete with fittings and seals, which are
also available separately
DS-222133
DESCRIPTION
For 66-84 Shovelhead
For 57-85 XL
SUG. RETAIL
$23.95
26.95
PART #
DS-246010
DS-246005
DS-246050
DS-174310
DS-246005
DESCRIPTION
Overhead oil line sets for 66-84 Shovelhead
Overhead oil line sets for 57-85 XL
Oil line tube fitting for 66-84 Shovelhead;
57-85 XL (ea.)
Oil line seals (ea.)
SEATS &
SISSY BARS
SUG. RETAIL
$16.95
16.95
EXHAUST
4.95
.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
0711-0035
HDOL201
OIL LINE KITS
•Oil line kits feature top-quality range of chrome
steel screw-in fittings that replace existing
OEM parts
•Provide exceptional performance and
attractive look
•Eye-catching components are crimped onto stainless steel braided PTFElined hose, which eliminates the need for bulky, awkward hose clamps
STAINLESS STEEL
BRAIDED OIL LINE KITS
•Direct replacements for OEM oil lines
•Compression and NPT fittings are chrome-plated
•Replacement washers are sold in 6-packs
0711-0063
PART #
DESCRIPTION
OIL LINE KITS
0711-0036
For L92-99 FXST/FLST models (4-line kit)
0711-0035
For 90-E92 FXST/FLST models (6-line kit)
0711-0034
For 87-89 FXST/FLST models (4-line kit)
0711-0042
For 92-98 Dyna models (3-line kit)
0711-0038
For 91-94 FXR models (5-line kit)
0711-0037
For 87-90 FXR models (4-line kit)
0711-0041
For 94-03 XL models (3-line kit)
0711-0040
0711-0039
REPLACEMENT WASHER
0711-0063
For oil lines (6-pk.)
SUG. RETAIL
$126.95
173.95
146.95
112.95
153.95
153.95
112.95
146.95
126.95
.95
•Designed for applications when a stock
oil line kit won’t work
•Feature pre-assembled, individual 3/8” i.d.
braided stainless steel Teflon® oil lines with rubber
compression fittings
•Fit most standard 3/8” single-barb oil fittings
•Length given is the overall length, including the fittings
•Replacement seals for compression fittings available separately
LENGTH
8”
9”
10”
11”
12”
13”
14”
15”
16”
17”
18”
20”
SUG.
RETAIL
$29.95
29.95
29.95
30.95
30.95
31.95
31.95
32.95
32.95
33.95
33.95
34.95
PART #
DS-222613
DS-222614
DS-222615
0711-0076
0711-0077
0711-0078
0711-0079
0711-0080
DS-222616
LENGTH
22”
24”
26”
28”
30”
32”
34”
36”
Repl.
compression
fitting seals
(12-pk.)
DESCRIPTION
For 92-99 Softail
For 86-91 Softail
For 92-98 FXD
For 86-91 FXR
For 99-01 FLHT/FLHR/FLTR
For 94-98 FLH/FLT
For 84-89 FLT/FLHT
SUG. RETAIL
$158.95
257.95
190.95
232.95
216.95
183.95
206.95
SUG.
RETAIL
$35.95
36.95
37.95
37.95
37.95
38.95
39.95
40.95
17.95
PART #
50002
50001
50000
50003
50010
50009
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
OIL LINE KITS
•Engineered to replace
stock hoses and outdated
clamps
•Designed to fit OEM oil
tanks, but may work on
aftermarket tanks
•Finished in high-luster
chrome
PRO SYSTEM INDIVIDUAL
OIL LINES
PART #
DS-222601
DS-222602
DS-222603
DS-222604
DS-222605
DS-222606
DS-222607
DS-222608
DS-222609
DS-222610
DS-222611
DS-222612
PART #
HDOL201
HDOL205
HDOL208
HDOL210
HDOL214
HDOL211
HDOL212
GASKETS
& SEALS
TANKS &
OIL FILTERS
DASHES
& GAUGES
DESCRIPTION
For L92-99 FXST, FLST
For 90-E92 FXST, FLST
For 87-90 FXR
For 92-98 Dyna
For 94-03 XL
SUG. RETAIL
$167.95
244.95
199.95
211.95
205.95
149.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
OIL LINE HOSE KIT
•Oil hose feed kit for Softail bikes
•Built with stainless steel hose and crimped on chrome ends
PART #
0711-0081
DESCRIPTION
SUG.
RETAIL
$56.95
COVERS,
SECURITY
& GENERAL
907
SECTION
15
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
HD0103CH
0711-0046
UNIVERSAL STAINLESS
STEEL BRAIDED OIL LINES
•Available in various lengths for
any custom application
•Include 1/8” NPT chrome compression fittings
for easy installation
•Measured overall, including fittings
SUG.
PART #
DESCRIPTION
RETAIL PART #
0711-0043 8”
$26.95 0711-0052
0711-0044 9”
27.95 0711-0053
0711-0045 10”
27.95 0711-0054
0711-0046 11”
28.95 0711-0055
0711-0047 12”
28.95 0711-0056
0711-0048 13”
25.95 0711-0057
0711-0049 14”
29.95 0711-0063
0711-0050 15”
30.95
0711-0051 16”
31.95
DESCRIPTION
17”
18”
20”
22”
24”
26”
Replacement
seals sold in
6-pk.
SUG.
RETAIL
31.95
32.95
33.95
34.95
35.95
36.95
.95 (ea.)
0711-0112
ENGINE
HD9003CH
HD4503CH
FUEL/AIR
SYSTEMS
0711-0110
HD0100CH
600-06
UNIVERSAL OIL LINE
AND -6 COMPONENTS
•Premium-quality reusable oil line components
•Chrome steel fittings and Teflon® hose are
offered individually, so you can build the kit
to suit your needs
•Fittings are used with our stainless steel braided PTFE-lined hose to
provide optimal performance for any Big Twin
PART #
DESCRIPTION
SUG. RETAIL
600-06
-6 stainless steel hose, 12’
$117.95
HD0100CH
Tank stub fitting
24.95
24.95
HD0103CH
Straight 1/8” NPT
HD4503CH
45° 1/8” NPT
36.95
HD9003CH
90° 1/8” NPT
36.95
HD-WASHER-6
Repl. oil line washer kit, 6-pack
8.95
0711-0111
0711-0122
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
0711-0119
0711-0120
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
908
0711-0138
0711-0115
0711-0150
0711-0121
UNIVERSAL BRAIDED OIL HOSE
AND FITTINGS
0711-0151
UNIVERSAL OIL LINES AND FITTINGS
•Oil hose is made from black braided nylon
that resists abrasion and corrosion; contains a
secondary CPE style rubber liner with a nylon inner braid
•Very flexible yet will not collapse under extreme heat
•Use with -6 full flow hose ends and adapter fittings (sold separately)
•Fittings and ends are constructed of lightweight black
anodized aluminum
•Hose ends feature a 37° angled sealing surface for a positive anti-leak seal
PART #
DESCRIPTION
SUG. RETAIL
11/32” OIL HOSES
0711-0122
6’
$47.95
0711-0123
10’
77.95
0711-0124
20’
150.95
HOSE ENDS
0711-0110
-6, straight
12.95
0711-0111
-6, 45° swivel tube end
33.95
0711-0112
-6, 90° swivel tube end
34.95
0711-0125
-6, compression
19.95
ADAPTER FITTINGS
0711-0113
-6 x 1/8”, 45° flare to pipe
22.95
0711-0114
-6 x 1/8”, flare to pipe
5.95
1
0711-0115
-6 x /8”, 90° flare to pipe
13.95
0711-0119
-6 x 1/4”, flare to pipe
5.95
0711-0120
14.95
13.95
0711-0121
1204-0030
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
0711-0114
0711-0113
•Premium stainless steel braided hoses are available with female chromed
steel swivel fittings that fit the universal chrome oil line fittings
(sold separtately)
•Featuring durable PTFE hose liners
NOTE: Oil line lengths are determined by measuring the distance between
the flares of the female swivel fittings.
SUG.
SUG.
PART #
DESCRIPTION RETAIL PART #
DESCRIPTION RETAIL
OIL LINES
OIL LINES (CONT)
0711-0133
6”
$39.95 0711-0141
15”
$45.95
0711-0134
7”
39.95 0711-0142
17”
46.95
0711-0135
8”
40.95 0711-0144
19”
48.95
0711-0136
9”
41.95 0711-0145
20”
47.95
0711-0137
10”
41.95 0711-0146
21”
49.95
0711-0138
11”
42.95 0711-0147
24”
51.95
0711-0139
13”
43.95 0711-0148
26”
51.95
0711-0140
14”
44.95
PART #
FITTINGS
0711-0149
0711-0150
0711-0151
0711-0152
0711-0153
0711-0154
DESCRIPTION
Straight 1/8” NPT adapter
Straight 1/4” NPT adapter
45° 1/8” NPT adapter
SUG. RETAIL
$7.95
7.95
13.95
13.95
13.95
13.95
0711-0032
0711-0033
1204-0031
CRANKCASE VENT LINE
TWIN CAM VENT LINES
•Replace unsightly stock
crankcase-to-oil tank vent line
•High-luster chrome finish
•Match other Russell Pro System braided lines
PART #
DESCRIPTION
1204-0030
For 99-05 Dyna
1204-0031
For 02-06 FLHT, FLHR, FLTR
0711-0082
SUG. RETAIL
$32.95
62.95
41.95
•Highly chromed steel construction
•Replaces the rubber OEM crankcase-to-oil
tank line
•Includes fittings for easy installation
PART #
DESCRIPTION
0711-0032
For 02-06 FLT; repl. OEM #45808-02
0711-0033
For 93-06 FLT w/ Baker 6-speed transmission
or conversion
SUG. RETAIL
$49.95
59.95
SECTION
15
WINDSHIELDS
TOURING
0713-0042
LUGGAGE
0712-0030
SEATS &
SISSY BARS
0713-0042
EXHAUST
0713-0045
OIL FILTER/OIL COOLER
•Filtration system designed to be used
as an additional filter along with stock oil filter
•Drastically reduces contamination and
viscosity breakdown
•Protects engine from cylinder/piston/ring/bearing
wear, cylinder bore polishing and extreme
oil temperatures
•Mounts above voltage regulator between frame rails
to take advantage of air flow off front tire
0712-0103
•Includes filter/cooler housing and mounting bracket,
off-set oil filter adapter, braided steel lines and swivel fittings,
spin-on oil filter and all necessary hardware
PART #
DESCRIPTION
SUG.RETAIL
CHROME
0713-0042
For 99-08 FXST/FLST and Dyna (except 06-08 Dyna Low Rider)
$498.95
0713-0043
For 06-08 Dyna Low Rider
498.95
0713-0044
498.95
BLACK CHROME
0713-0045
For 99-08 FXST/FLST and Dyna (except 06-08 Dyna Low Rider)
498.95
0713-0046
For 06-08 Dyna Low Rider
498.95
0713-0047
498.95
REPL. OIL FILTER W/ O-RING
0712-0103
For Feuling Oil Filter/Oil Cooler
22.95
FUEL/AIR
SYSTEMS
PHANTOM OIL FILTER KIT
•High-quality billet aluminum
hidden oil filter system includes
a weld-in and a bolt-in flange
•For horseshoe-style oil tanks installed in aftermarket Softail or
Rigid style frames
•Cleans up front of motorcycle
•Changing filter is easy; no messy drain pans, no oil running
down the front of your motorcycle and no wrenches needed
•Premium aircraft grade hardware, O-ring seals and complete
instructions included
NOTE: 21/2” of flat surface area required; drilling and cutting
required for installation
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
NOTE: Will not fit center fill oil tanks.
NOTE: Will not fit stock Softail models without modifications
made to frame above oil tank.
PART #
DESCRIPTION
SUG. RETAIL
0712-0030
Oil filter kit
$229.95
10-28300
Repl. oil filter
3.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
DS-275035
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
OIL FILTER CANISTER/OIL COOLER
DS-275031
SPIN-ON FILTER-COOLER KIT
•Polished billet aluminum filter housing with stainless mounting plate
•Mounts directly to any 3/4”-16 spin-on filter mount
•Provides oil cooling with easy oil filter changes
•Includes all necessary seals plus three high-efficiency replacement filters
PART #
DESCRIPTION
SUG. RETAIL
DS-275031
For 92-09 FLHT, 91-09 FXD, 92-09 FXST/FXR,
84-09 XL; replaces oil filter OEM #s 63731-99,
63813-90, 63796-77A, 63805-80, 63805-83
$190.95
DS-275032
Repl. O-ring and flow valve kit for DS-275031
4.95
DS-275112
Repl. oil filter (ea.)
8.95
•External oil filter canister is made of polished and lacquered
cast aluminum
•Comes with chromed brass hose fittings, machined aluminum cap with
O-ring seal, 7’ of 3/8” oil line, four hose clamps and four tie-wraps
•Mounting hole size is 5/16” and center-to-center is 13/8”
PART #
DESCRIPTION
SUG. RETAIL
DS-275035
Perf-form filter canister
$173.95
DS-275115
Repl. filter
8.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
FILTER CANISTER MOUNT
•Chrome mounting bracket allows easy
horizontal mounting of any Perf-form™
filter canister over the voltage regulator
in front of the engine
•Bolts to left front footpeg and kickstand
frame lug
•Made in the U.S.A.; sold individually
PART #
DESCRIPTION
DS-275040
Perf-form filter canister mount for 70-86
FX, FXST, FXWG and FL models
FRAMES,
SUSPENSION
& FENDERS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$35.95
COVERS,
SECURITY
& GENERAL
909
SECTION
15
DS-275100
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXTERNAL
OIL FILTER HOUSING
CHROME OIL FILTER/
REGULATOR MOUNT
•.250” machined-from-billet plate
with oil passageways
•Predrilled to accept regulator
•Mounts to front motor mount
•Comes with mounting hardware
and fittings and uses
PART #s DS-275113/117 filter
PART #
DESCRIPTION
DS-190781
For 75-99 FX models
SUG. RETAIL
$108.95
•A chromed replica of the oil filter that
came stock on 40-57 Big Twin models
•Great for a restoration or for custom
Shovelhead applications
•Replacement paper oil filter
PART #
DESCRIPTION
DS-275100
Remote filter housing for 40-57 Big Twin
and custom Shovelhead applications
DS-275202
Repl. filter
SUG. RETAIL
$57.95
5.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
OIL FILTER
MOUNTING BRACKET KIT
•Polished billet oil filter mounting
bracket for Twin Cam engines
was specially designed and
created for the S&S 124” Twin
Cam engines, but makes a
great cosmetic and functional
upgrade for engines built
with stock Twin Cam crankcases as well
•No voids or other casting defects in the material to cause leaks
•Position of the filter has been shifted slightly to give additional clearance
between the filter body and the crankcase for easier filter installation
and removal
•Also machined to make it easy to install an oil cooler in the pressure-side
of the system; if a cooler is not needed, simply install the pipe plugs in
the threaded holes in the filter bracket, instead of the hose fittings
PART #
DESCRIPTION
SUG. RETAIL
0712-0059
99-06 Twin Cam (except 06 Dyna) and all S&S
T-series motors
$133.95
LIGHTING
BILLET OIL FILTER MOUNT
•Designed to mount directly to the engine case
•Conceals oil lines, clamps and fittings for a clean look
•Machined from billet aluminum and chromed to a mirror finish
•Fits Evo engines with mounting bosses in the engine case
•Comes complete with mounting bolts and fittings to accept
3/8” oil hoses
PART #
DESCRIPTION
SUG. RETAIL
0712-0038
For 92-99 80” Big Twins
$232.95
BILLET OIL FILTER MOUNT
•Chrome-plated billet aluminum
mount replaces cast OEM oil filter mount
•Available in a smooth or ball-milled style
•Tapped for 1/4” NPT fittings (sold separately)
•Oil lines must be ordered separately
HANDLEBARS,
CONTROLS
& MIRRORS
PART #
DESCRIPTION
SUG. RETAIL
FOR 92-99 FXST/FLST, FXR AND 91-98 DYNA GLIDE MODELS
(OEM #26378-92/26381-92)
0712-0036
Smooth
$165.95
DS-190479
Ball-milled
165.95
0712-0036
CABLES
DS-190479
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
SLIMLINE
BILLET OIL
FILTER MOUNT
CHROME BILLET
OIL FILTER MOUNT
•Chrome-plated
1/2”-thick billet aluminum mount
with 3/8” external fittings
•Provides a low-cost, slim oil filter mount
PART #
DESCRIPTION
FOR 92-99 80” BIG TWIN MODELS
0712-0035
Slimline
SUG. RETAIL
$99.95
•Available in a smooth design
•Accepts OEM oil lines and hard line fittings
PART #
DESCRIPTION
DS-190771
For 92-99 Evolution Big Twin
SUG. RETAIL
$169.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
910
CHROME OIL
FILTER MOUNT
•Designed to replace the OEM
cast mount
•Includes oil filter adapter
•Mounts with OEM hardware
•11/16” threads accept OEM
hard lines
PART #
DESCRIPTION
DS-275107
For all 92-99 Big Twin Evolution models;
repl. OEM#26378-92A/26381-92A
CUSTOM OIL
FILTER MOUNT
SUG. RETAIL
$42.95
•Chrome filter mount features
3/8” fittings and may be used
with stainless steel or rubber lines
•Accepts all types of oil filters
PART #
DESCRIPTION
DS-275104
For 92-99 80” Evolution Big Twin models
SUG. RETAIL
$39.95
SECTION
15
WINDSHIELDS
TOURING
LUGGAGE
DELUXE OIL LINE NACELLE COVER
•Blankets the area between the cam cover and
the transmission
•Covers the oil lines and the exposed clutch
cable where it enters the transmission cover
•Easily installed
PART #
DESCRIPTION
SUG. RETAIL
0711-0155 For 07-09 FXST/FLST
$69.95
SEATS &
SISSY BARS
OIL LINE NACELLE COVER
•Die-cast chrome cover dresses up the area between the cam cover
and transmission
•Stock chrome oil lines exit through the cover for a high-tech appearance
PART #
DESCRIPTION
0940-0495
SUG. RETAIL
$59.95
EXHAUST
FUEL/AIR
SYSTEMS
OIL HOSE COVER
•Brighten an unfinished
area on stock bikes
•Die-cast aluminum
with a beautiful
chrome finish
•Includes
mounting hardware
PART #
DESCRIPTION
0940-0439
For 99-06 FLHT/FLHR/FLTR; repl. OEM #37946-99
ENGINE
OIL LINE COVER
SUG. RETAIL
$39.95
•Chrome two-piece cover hides
that plain rubber oil line beneath
the right side of your oil tank
PART #
DESCRIPTION
0711-0058
TRANSMISSION
& DRIVELINE
SUG. RETAIL
$39.95
1902-0024
OIL LINE COVER/
TRANSMISSION SHROUD
•Oil lines disappear under a luscious
layer of chrome
•Also covers the rough-cast area around the transmission
•Easy installation
PART #
DESCRIPTION
SUG. RETAIL
DS-305020
For 99-05 FXD
$59.95
1902-0024
For 02-06 FLT
89.95
DS-305021
For 99-01 FLHR, 00-01 FLT
69.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
DS-305020
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
CHROME BILLET ALUMINUM OIL DRAIN
•Unique drain mounts cleanly and easily to the rear of the transmission
mounting plate
•Utilizes existing OEM hardware (mounting bolt and hose clamp)
•Works on stock bikes as well as those running wide tires with
offset transmissions
•Includes barbed oil line fitting and hex drive pipe plug
PART #
DESCRIPTION
SUG. RETAIL
DS-310241
$42.95
BRAKES
TANKS &
OIL FILTERS
DS-310243
DS-310245
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
NO-PAIN OIL DRAINS
OIL FILTER DRAIN TRAYS
•Tired of hot oil running down your oil filter
and all over your bike and floor?
•Once the filter has been loosened, these unique drain trays fit
underneath the oil filter and against the filter mount to direct the oil
into your catch pan – not all over your bike or the floor
•Manufactured from a carefully selected polymer to resist chemical attack
and dimensional distortion from the hot oil
•Easy to keep clean, and small enough to take with you on that long trip
•Indispensable in any shop, home garage or on the road
•Made in the U.S.A.; sold each
PART #
DESCRIPTION
SUG. RETAIL
DS-310249 For 99-09 Twin Cam FLHT, FLHR, FLTR and 99-05 FXD
$17.95
DS-310247 For 84-99 Evolution Big Twin
17.95
DS-310248 For L84-03 XL
18.95
•Specially modified quick-release
coupling makes oil changes
a snap
•Simply attach the drain hose to
the special coupler, drain the oil,
remove the hose from the coupler
and refill the tank
•No more oily mess or fumbling with a hose plug
•DS-310245 installs in-line on the OEM drain hose on 89-99 FXST/FLST and
91-94 FXR models
•DS-310243 replaces the stock oil plug on early-style (1/2”-20) oil tanks and
remains permanently on the tank
•Made in the U.S.A. by Custom Cycle Engineering
PART #
DESCRIPTION
SUG. RETAIL
DS-310245 In-line oil drain for 89-99 FXST/FLST and 91-94 FXR
$77.95
71.95
DS-310243 1/2”-20 oil drain
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
911
SECTION
15
WINDSHIELDS
2005-1400
TOURING
DS-275109
0712-0021
0712-0023
DS-275119
DS-275108
0712-0012
LUGGAGE
SPIN-ON OIL FILTERS
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
DESCRIPTION
For 99-09 Twin Cam models; repl. OEM #63798-99
For 80-98 FLT; 82-94 FXR; 84-99 FXST, FLST; L84-09 XL;
repl. OEM #s 63796-77A, 63806-83 and 63805-80A
For 91-98 Dyna Glide; repl. OEM #63813-90
For 02-09 V-Rod; repl. OEM #63793-01K
For L82-86 FLH, FX; 80-E84 XL; repl. OEM #s 63782-80A and 63810-80
For 53-82 FX/FL, 57-78 XL; repl. OEM #63840-53
Paper filter for 48-52 Panhead; 36-47 Knucklehead;
36-48 Flathead; repl. OEM #63840-48A
Side mount oil filter gasket set for 48-64 FL
1
DS-275201
BLACK
DS-275109
SUG.
RETAIL
$8.95
DS-275204
DS-275119
2005-1400
DS-275206
DS-2752011
7.45
8.95
9.95
7.95
4.95
DS-2752021
DS-173527
5.95
11.95
0712-0018
DS-275206
DS-275203
0712-0019
•High-quality spin-on filters are a
dependable replacement for most
H-D models
•Available in chrome and black versions
•Twin Cam and V-Rod filters feature 10
micron paper
•Filters with nut include a 17mm hex nut on the end of the filter for
easy installation/removal
DS-173527
DS-275202
BLACK
SUG.
WITH NUT RETAIL
0712-0021 $9.95
CHROME
DS-275108
SUG.
RETAIL
$10.95
0712-0019
0712-0023
0712-0022
0712-0132
-
DS-275203
DS-275118
DS-275205
-
10.95
10.95
10.95
-
9.95
9.95
9.95
9.95
-
-
-
-
-
CHROME
SUG.
WITH NUT RETAIL
0712-0011 $12.95
0712-0009
0712-0012
0712-0018
-
12.95
12.95
12.95
-
-
-
This is a drop-in filter.
GASKETS
& SEALS
ELECTRICAL
DS-275188
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
0712-0008
DS-275142
0712-0007
DS-275141
DS-275140
0712-0006
MAGNETIC RING OIL FILTERS
•High-quality spin-on-style oil filters
•Available in chrome or black
•Magnetic filters are designed with a magnetic ring in center to capture small particles of loose metal and come with pressure relief valves
•Twin Cam and V-Rod filters feature 10-micron paper
•Some filters come with a 17mm nut on the end of the filter for easy installation/removal
APPLICATION
BLACK
SUG. RETAIL
CHROME
SUG. RETAIL CHROME WITH NUT SUG. RETAIL
02-09 V-Rod; repl. OEM #63793-01K
2005-0024
$13.95
- DS-275188
$13.95 0712-0008
$14.95
99-09 Twin Cam; repl. OEM #63798-99 (31/4”)
91-98 FXD; repl. OEM #63813-90 (51/2”)
DS-275142
12.95
DS-275127
13.95 0712-0007
14.95
84-99 FXST/FLST, 84-99 FLT/FLH, L84-08 XL, 82-94 FXR;
DS-275141
10.95
DS-275126
12.95 0712-0004
14.95
repl. OEM #s 63796-77A, 63806-83, 63805-80A (31/4”)
L82-86 FX/FL, 80-E84 XL; repl. OEM #s 63782-80, 63810-80 (21/4”)
DS-275140
10.95
DS-275125
12.95 0712-0006
14.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
912
0712-0058
DS-275113
DS-275115
DS-275117
DS-275129
DS-275130
HD-2L
PERF-FORM OIL FILTERS
•Black or chrome Perf-form oil filters have a proven service record
•Made from the best materials and allow for quick changes
•PART #s DS-275114 and HD-2L also fit our spin-on kits PART #s DS-275015 and DS-275017 and most H-D accessory spin-on kits
PART #
DESCRIPTION
HD-V
Black filter for 02-08 V-Rod models; repl. OEM #63793-01K
DS-275130
Chrome filter for 99-08 Twin Cam models (3.5”) w/ anti-drain back valve
DS-275111
Black filter for 99-08 Twin Cam models (3.5”) w/ anti-drain back valve
PRICE LIST
DS-275114
Chrome filter for all 80-98 5-sp.; 84-99 FXST, FLST; L84-08 XL; for all 94-02 Buell models (exc. Blast);
PART #
repl. OEM #63796-77A (4.125”)
0712-0058
HD-2L
Black filter for all 80-98 5-sp. (including fuel-injected models); 84-99 FXST, FLST; L84-08 XL;
DS-275111
for all 94-02 Buell models (exc. Blast); repl. OEM #s 63805-80, 63806-83 (4.125”)
DS-275113
DS-275129
Chrome filter for all 91-98 Dyna Glide models; repl. OEM #63813-90 (5.5”)
DS-275114
DS-275128
Black filter for all 91-98 Dyna Glide models; repl. OEM #63812-90 (5.5”)
DS-275115
DS-275113
Chrome filter for L82-86 FXWG, 82-84 Shovelhead w/ factory spin-on kit; 80-E84 XL;
DS-275117
repl. OEM #s 63810-80, 63782-80 (2.25”)
DS-275128
DS-275117
Black filter for L82-86 FXWG, 82-84 Shovelhead w/ factory spin-on kit; 80-E84 XL;
DS-275129
repl. OEM #s 63810-80, 63782-80 (2.25”)
DS-275130
DS-275115
Drop-in filter for 53-82 FX, FL, 57-78 XL (4.5”); repl. OEM #63840-53
HD-2L
0712-0058
Black filter for 00-09 Blast, 03-09 Firebolt XB9R, 05-09 Lightning City XXB9SX/Lightning XB12CG ,
HD-V
03-04 Lightning XB9S, 04-09 Firebolt XB12R/Lightning XB12S
SUG. RETAIL
$11.95
10.95
14.95
15.95
8.95
9.95
10.95
15.95
15.95
11.95
11.95
SECTION
15
0712-0099
OIL FILTERS
•K&N delivers a Race-Spec oil filter
which is built with a synthetic media
specifically designed to withstand the
high concentrates of synthetic racing oils
•Built to racing specifications
•17mm hex nut allows easy-on/easy wrench-off
•Synthetic filter media provides outstanding filtration at high-flow rates
•Predrilled for safety wire security
•Protected by a heavy-duty canister and a double-rolled base plate
•Check-valve/anti-drain back valve prevents drain-back and dry starts; where applicable
•Prelubed base gasket for optimum seal
•TUV production monitored and endorsed ensures the highest quality filters available
•Performance Gold (PG) filters do not include a bypass valve
FITS MODEL
For 99-09 Twin Cam models
For 91-98 Dyna Glide
For 80-98 FLT, 82-94 FXR, 84-99 Softail, L84-09
XL; all 94-02 Buell models (exc. Blast)
For 02-09 V-Rod
For L82-86 FL/FX 4-speed, 79-E84 XL
For 02-09 Buell Blast 500 (all), 04-09 Firebolt
XB12R 1200, 03-09 Firebolt XB9R 900,
03-09 Lightning/CityX XB9S/SX 900,
04-09 Lightning XB12S/SCG 1200
REPLACES OEM #
63798-99, 63731-99
63812-90, 63813-90
BLACK
KN-171B
-
63796-77A, 63805-80A 63793-01K
63782-80, 63810-80A -
6380600Y
PG
BLACK
-
WINDSHIELDS
TOURING
•Sturdy steel canister houses the finest filtering
media and internal components available
•Canister is slightly smaller in diameter than stock
filters to make them easier to remove and install
•Designed with a direct bypass valve that routes
bypass oil directly to the filter exit, which minimizes
the amount of contaminants carried to the engine in
the unfiltered bypass oil
•The nominal particle capture size is smaller than that
of stock filters while the resistance to oil flow
is nearly the same
•Available in black and chrome finish
PG
CHROME CHROME
KN-171C KN-173C -
KN-170 KN-170C
KN-174C KN-172C -
0712-0045 -
-
PART #
FOR 84-99 BIG TWIN
0712-0099
0712-0100
FOR 99-09 TWIN CAM
0712-0101
0712-0102
-
PRICE LIST
PART #
SUG. RETAIL
0712-0045
$14.95
KN-170
14.95
PART #
KN-170C
KN-171B
SUG. RETAIL
$16.95
14.95
PART #
KN-171C
KN-172C
SUG. RETAIL
$16.95
14.95
PART #
KN-173C
KN-174C
0712-0100
OIL FILTERS
SUG. RETAIL
$17.95
16.95
DESCRIPTION
SUG. RETAIL
Black
Chrome
$10.95
13.95
Black
Chrome
10.95
13.95
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
EMGO OIL FILTERS
GASKETS
& SEALS
•Only the highest quality paper, metal and rubber are used
to manufacture these top-grade filters
•Bonded with extra strong epoxy (polyvinyl acetate) for long life
•Clean oil makes engines last longer
FITS MODEL
91-98 Dyna Glide
80-98 FLT, 82-94 FXR, 84-99 FXST/FLST, L84-09 XL;
all 94-02 Buell models (exc. Blast)
L82-86 FL/FX 4-speed, 79-E84 XL
53-82 FX/XL, 53-78 XL
00-09 Buell Blast, 03-09 Buell Firebolt XB9R/
Buell Lightning XB9S, 04-09 Buell Firebolt XB12R/
Buell Lightning XB12S, 06-07 Ulysses XB12X
1
PRICE LIST
REPLACES OEM #
63812-90, 63813-90
63731-99/A, 63781-72R, 63796-77/A,
63798-99/A, 63805-80/A, 63806-83
63782-80, 63810-80A
63840-53
EMGO BLACK
10-82430
10-82410
10-824501
10-07700
-
EMGO CHROME
10-82420
10-82400
10-824401
10-07800
-
EMGO DROP-IN
10-28300
63806-00Y
-
-
-
PART #
SUG. RETAIL
10-07700
$5.95
10-07800
7.95
10-28300
3.95
10-82400
8.95
10-82410
5.95
10-82420
10.95
10-82430
7.95
10-82440
11.95
10-82450
7.95
Micro-Tech filter.
HIFLOFILTRO® OIL FILTERS
•The original Hiflofiltro factory was founded in 1955 and has been manufacturing
filters for the OEM motor industry since 1963
•With the experience of more than five decades, constant research and development and featuring a completely
modern production facility Hiflofiltro offers some of the best quality filters in the world
•TUV approved and production monitored to ensure OEM or better quality
•Constructed using the best materials available
HF171B
•One of the broadest ranges of aftermarket coverage
FITS MODEL
99-09 Twin Cam models (anti-drain back valve)
91-98 Dyna Glide
80-90 FLT, 82-94 FXR, 84-99 Softail, L84-09 XL
97-02 Cyclone M2, 94-02 Lightning S1/X1, 02 White Lightning X1W,
94-02 Thunderbolt S2/S2T/S3/S3T
00-09 Buell Blast, 03-09 Buell Firebolt XB9R/Buell Lightning XB9S,
04-09 Buell Firebolt XB12R/Buell Lightning XB12S
02-09 V-Rod
SUG. RETAIL
$6.65
6.65
-
63805-80A
HF170B
6.65
CHROME
HF171C
HF173C
HF170C
HF172C
HF170C
-
63806-00Y
-
0712-0044
-
7.20
-
HF174C
SUG. RETAIL
$8.85
11.65
9.00
8.85
9.00
8.85
PART # SUG. RETAIL
PH6019
$14.60
OIL FILTER
MAGNETS
PH6022
PH6065
REPLACES OEM #
63798-99, 63731-99
63812-90, 63813-90
63731-99/A, 63781-72R, 63796-77/A,
63798-99/A, 63805-80/A, 63806-83
63782-80, 63810-80A
BLACK
PH6022
-
CHROME
PH6068
-
PH6065
PH6019
63806-00Y
PH4967
-
PART # SUG. RETAIL
PH6022
$10.30
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
PRICE LIST
PART # SUG. RETAIL
PH4967
$9.00
HANDLEBARS,
CONTROLS
& MIRRORS
BRAKES
HF173C
BLACK
HF171B
HF170B
-
OIL FILTERS
FITS MODEL
99-09 Twin Cam (anti-drain back valve)
91-98 Dyna Glide
80-98 FLT, 82-94 FXR, 84-99 FXST/FLST,
L84-09 XL; all 94-02 Buell models (exc. Blast)
00-09 Buell Blast, 03-09 Buell Firebolt XB9R/
Buell Lightning XB9S, 04-09 Buell Firebolt XB12R/
Buell Lightning XB12S, 06-07 Ulysses XB12X
LIGHTING
CABLES
REPLACES OEM #
63798-99, 63731-99
63812-90, 63813-90
63796-77A, 63805-80A
63782-80, 63810-80A
•High-quality filters are made to strict specifications
to provide superior performance
•Micron rating of 10 traps microscopic dirt particles without restricting oil flow
•Pressure relief valve ensures regular oil flow
•Include all necessary O-rings or gaskets
•Available for spin-on applications
ELECTRICAL
PART # SUG. RETAIL
PH6065
$18.30
PART # SUG. RETAIL
PH6068
$19.60
•Polished ceramiccoated magnets
•Two mini magnets
designed for smaller
motorcycle filters
•No restriction
in oil flow
•SAE-tested engine safe
•Rated to a temperature of 842°F
•Removes a majority of wear particulates
down to .5 microns
•Improves engine efficiency
•Sold in pairs
PART #
DESCRIPTION
0712-0139 Magna-Guard filter magnets
SUG.
RETAIL
$7.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
913
SECTION
15
0713-0005
WINDSHIELDS
TOURING
LUGGAGE
0713-0002
SEATS &
SISSY BARS
0713-0030
0713-0003
0713-0059
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
0713-0025
TRANSMISSION
& DRIVELINE
0713-0007
GASKETS
& SEALS
ELECTRICAL
LIGHTING
0713-0054
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
0713-0064
0713-0063
OIL COOLERS
INSTALLATION TIME MEASURED IN MINUTES
EXTRA RIDING TIME MEASURED IN YEARS
•Cooler oil makes engines last longer – simple as that!
•Jagg oil coolers feature cutting-edge technology to keep your engine cool under the most punishing conditions
•And because they’re designed to look as good as they perform, they’ll perfectly complement your bike’s style
•Hoses and clamps are included with oil cooler kits
ENGINEERED TO PERFORM
BRAKES
TANKS &
OIL FILTERS
•Multipass oil flow configuration ensures the oil’s utilization of the entire oil cooler
•Specially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with
minimal oil pressure restriction
•Highly concentrated mini-louvered air fins allow maximum heat transfer
NOTE: Vertical oil coolers do not fit touring models with lower fairings.
NOTE: Ten-row coolers are recommended for 95” and larger motors.
VERTICAL-MOUNT OIL COOLERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
914
PART #
DESCRIPTION
6-ROW DELUXE
0713-00021
84-09 FXST/FLST models
0713-0002
82-99 FXR models
0713-0002
55-83 Panhead and Shovelhead
0713-00021
84-09 FLHT, FLHR, FLTR models
0713-0002
55-03 XL models
6-ROW SLIMLINE
0713-00031
0713-0003
82-99 FXR models
0713-0003
0713-00031
0713-0003
55-03 XL models
SUG. RETAIL
$226.95
226.95
226.95
226.95
226.95
180.95
180.95
180.95
180.95
180.95
PART #
DESCRIPTION
6-ROW CHROME
0713-00051
0713-0005
82-99 FXR models
0713-0005
1
0713-0005
0713-0005
55-03 XL models
TEN-ROW INLINE
0713-0029
84-09 FXST/FLST models; black
0713-0058
84-09 FXST/FLST models; chrome
0713-0030
84-09 FLHT, FLHR and FLTR models; black
0713-0059
84-09 FLHT, FLHR and FLTR models; chrome
1
SUG. RETAIL
$299.95
299.95
299.95
299.95
299.95
210.95
279.95
210.95
279.95
Twin Cam models require use of oil filter adapter PART #J4600
or 0713-0031 to access oil supply.
HORIZONTAL-MOUNT OIL COOLERS
PART #
DESCRIPTION
SIX-ROW LOW MOUNT
1
0713-0025
84-08 FXST/FLST models; black
J12701
84-08 FLHT, FLHR, FLTR models; black
0713-00071
84-08 FLHT, FLHR, FLTR models; chrome
J1390
96-02 Buell models (except XBs); black
TEN-ROW LOW MOUNT
0713-00541
84-09 FLHT, FLHR, FLTR models; black
SUG. RETAIL
$190.95
190.95
226.95
279.95
PART #
DESCRIPTION
TEN-ROW LOW MOUNT (CONT)
1
0713-0063
84-09 FLHT, FLHR, FLTR models; chrome
0713-00641
91-09 Dyna models; black
0713-00651
91-09 Dyna models; chrome
1
SUG. RETAIL
Twin Cam models require use of oil filter adapters PART #J4600
or 0713-0031 to access oil supply.
226.95
$299.95
226.95
299.95
SECTION
15
WINDSHIELDS
J4600 Front
TOURING
LUGGAGE
J4400 Back
J4600 Back
0713-0031 Back
0713-0031 Front
SEATS &
SISSY BARS
J4400 Front
OIL COOLER ADAPTERS
•Allow quick-and-easy access to oil supply for any oil
cooler installation
•Advanced design allows hot oil to go through the oil filter
0713-0049
before it is routed through the oil cooler, resulting in
0713-0048
less overall restriction and pressure drop
0713-0050
•PART #0713-0031 features an integrated automatic thermostatic actuator to ensure rapid engine warm-up
•Anti-rotation kits (sold separately) ensure that the oil filter adapters PART #S J4600 and 0713-0031 cannot rotate during oil filter removal
•PART #0713-0050 upgrade nut is designed to replace the stock threaded oil filter mounting stem on applications where stem is too long, to ensure
proper oil flow characteristics when installing adapter PART #J4400
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
J4400
Adapter for all H-D models w/ front-mounted
4600GK
Service kit (repl. gasket) for oil filter adapter
spin-on filters except fuel-injected Evolution
PART #s J4600 and 0713-0031
$9.95
and all Twin Cam models
$85.95 0713-0048 Off-set anti-rotation kit for adapter
J4600
Off-set adapter for fuel-injected Evolution
PART #s J4600 and 0713-0031, Twin Cam A models
9.95
and all Twin Cam models
110.95 0713-0049 Off-set anti-rotation kit for adapter
0713-0031 Off-set adapter w/ automatic thermostat for
PART #s J4600 and 0713-0031, Twin Cam B models
9.95
fuel-injected Evolution and all Twin Cam models
150.95 0713-0050 J4400 oil filter adapter upgrade nut for S&S motors
9.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
0713-0060
0713-0009
0713-0011
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
0713-0010
0713-0061
CABLES
0713-0062
0713-0012
UNIVERSAL OIL COOLERS
•Ideal for custom and vintage builders, racing, or any need for a cooler
•Feature cutting-edge technology to keep your engine cool under the most punishing conditions
•Specially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation
surface area for superior cooling with minimal increase in oil pressure restriction
•Highly concentrated mini-louvered air fins allow maximum heat transfer
•Do not include hoses or hardware
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
0713-0009 6 row; 2.5” W x 8.25” L x 1.5” thick; inline inlet/
0713-0061 10 row; 4” W x 8.25” L x 1.5” thick; inline inlet/
7
7
$155.95
$195.95
outlet w/ 3 /8” oc top-mounting tabs
outlet w/ 3 /8” oc bottom-mounting screws
0713-0011 6 row; 2.5” W x 8.25” L x 1.5” thick; 90° inlet/outlet
0713-0062 10 row; 4” W x 8.25” L x 1.5” thick; 90° inlet/outlet
155.95
195.95
w/ 37/8” oc bottom-mounting screws
w/ 37/8” oc bottom-mounting screws
0713-0012 6 row; 2.5” W x 8.25” L x 1.5” thick; 90° inlet/outlet
0713-0010 14 row; 5” W x 8.25” L x 1.5” thick; inline inlet/
155.95
235.95
w/ 37/8” oc top-mounting screws
outlet w/ 37/8” oc top- and bottom-mounting tabs
0713-0060 6 row; 2.5” W x 8.25” L x 1.5” thick; inline inlet/
7
155.95
outlet w/ 3 /8” oc bottom-mounting screws
OIL COOLER
BYPASS VALVE
CLAMPS
•For mounting Jagg’s universal oil coolers, custom
0713-0013
oil coolers, and many other applications
•Sold each
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
0713-0013
For 1” dia. frames
$6.95 0713-0016
For 13/8” dia. frames
6.95 0713-0017
0713-0014
0713-0015
6.95
SUG. RETAIL
$6.95
6.95
•Bypass valve J4000B
works in conjunction with
all oil coolers as a manual
version of a thermostat
•Compact design blends
into the oil lines, offering
a less cluttered appearance
PART # DESCRIPTION
SUG. RETAIL
$64.95
J4000B By-pass valve for all oil coolers
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
915
SECTION
15
CHROME OIL
COOLER KIT
WINDSHIELDS
0713-0023
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
SINGLE TUBE
BILLET OIL COOLER
•103/4” long with 3/8” i.d. hose fittings
•Double pinch frame clamps hold coolers
firmly in place
0713-0021
•Drops oil temperature by 20 degrees
•Available in a chrome or black/polished finish
•Requires an oil filter adapter for proper installation (sold separately)
SUG.
PART #
DESCRIPTION
RETAIL
FOR 11/8” FRAMES
0713-0021 Black w/ polished fins $205.95
0713-0023 Chrome
233.95
SUG.
PART #
DESCRIPTION
RETAIL
FOR 11/4” FRAMES
0713-0022 Black w/ polished fins $205.95
0713-0024 Chrome
233.95
•Kits mount to frame
tubes with supplied
clamps and reducers
0713-0052
•Available with or without a temperature gauge
•Comes with AN #6 fittings (use with -6 lines
found in most speed shops)
DS-310204
•If using standard 3/8” hose, use breather
fittings PART #DS-245263 (sold separately)
•Measures 12” L x 2.25” diameter
•CNC machined from billet aluminum and chrome plated
0713-0056
•Replacement clamps available separately
PART #
DESCRIPTION
FOR 1” TO 11/4” FRAME TUBES
DS-310204
Oil cooler
0713-0052
Oil cooler w/ temp gauge
0713-0056
Replacement clamp
FOR 11/2” FRAME TUBES
0713-0019
Oil cooler
0713-0051
Oil cooler w/ temp gauge
0713-0057
Replacement clamp
TUBE OIL COOLERS
1911-5007
SUG. RETAIL
$330.95
385.95
66.95
330.95
385.95
66.95
1911-5004
1911-5002
•Available in chrome, black with polished fins
or all-black styles
•Coolers mount to the front down tube of the frame
•Twin Cam applications require an adapter to provide easy access to the
oil supply (sold separately)
•Cooler includes required mounting hardware; hose clamps and oil line
must be purchased separately (uses 3/8” i.d. oil line)
•Measures approximately 101/2” long with a 1” diameter
PART #
DESCRIPTION
SUG. RETAIL
99-08 FLHT/I, FLHR/I, FLTR/I, FLHTCU/I
1
1
(1 /8” AND 1 /4” CLAMPS)
1911-5010
Chrome
$438.95
1911-5011
Black w/ polished fins
438.95
1911-5012
Black
438.95
1
1
91-09 FXD, FXDWG (1 /4” AND 1 /2” CLAMPS)
1911-5007
Chrome
429.95
PART #
DESCRIPTION
SUG. RETAIL
91-09 FXD, FXDWG (11/4” AND 11/2” CLAMPS) (CONT)
1911-5008
$429.95
00-09 FXST, FLST (11/4” CLAMPS)
1911-5003
Chrome
438.95
1911-5004
438.95
1911-5005
Black
438.95
PART #
DESCRIPTION
SUG. RETAIL
65-84 FLH, FX, 84-99 FXST, FLST, FLHR/I, FLT/I, FLHR/I
1
(1 /8” CLAMPS)
1911-5000
Chrome
$438.95
1911-5001
438.95
1911-5002
Black
438.95
OIL COOLER COVER
•Quality black vinyl cover
features hook-and-loop
fasteners for easy installation and removal
•Keeps oil at the correct operating temperature
when riding in cool weather
•Designed for use on OEM and Jagg Slimline oil cooler
•8” L x 21/4” W x 11/4” D
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
BLACK OIL COOLER
HOSE KIT
•Includes 3’ of Russell Pro Classic
black cloth braided hose and
four Russell black anodized
compression hose fittings
•A clean, no clamp installation on
smooth barb oil cooler and filter
adapters is provided by
the fittings
•Gives you the perfect finishing
touch to a durable cooler
installation
PART #
DESCRIPTION
0711-0156
Oil cooler hose kit
SUG. RETAIL
$92.95
916
SUG. RETAIL
$14.95
Copper
BRAIDED STAINLESS
AND COPPER HOSES
PART #
DESCRIPTION
BRAIDED STAINLESS STEEL HOSE
1
0711-0104
/4” i.d.
5
0711-0105
/16” i.d.
3
/8” i.d.
0711-0106
0711-0097
0711-0159
FOOTRESTS
& LICENSE BRAIDED HOSE
PLATE FRAMES •Braided hose is neoprene lined
COVERS,
SECURITY
& GENERAL
Oil cooler cover
•25’ rolls of braided stainless steel or braided copper
hoses for various OEM and custom applications
FRAMES,
SUSPENSION
& FENDERS
HARDWARE,
CHEMICALS
& TOOLS
DESCRIPTION
3511-0001
Stainless
DASHES
& GAUGES
TIRES,
TUBES &
WHEELS
PART #
DESCRIPTION
6’, stainless
10’, stainless
25’, stainless
6’, stainless
10’, stainless
25’, stainless
SUG. RETAIL
$44.95
67.95
160.95
44.95
74.95
176.95
PART #
3
/8” HOSE
0711-0096
0711-0159
0711-0097
0711-0160
0711-0098
$121.95
123.95
125.95
PART #
DESCRIPTION
BRAIDED COPPER HOSE
1
0711-0107
/4” i.d.
5
0711-0108
/16” i.d.
3
/8” i.d.
0711-0109
SUG.
RETAIL
$101.95
103.95
106.95
STAINLESS
STEEL
BRAIDED
HOSE
•Can be used as fuel line or oil line
•For use with Goodridge hose finishers
(sold separately)
•Available in stainless or black finish
PART #
1
/4” HOSE
0711-0090
0711-0091
0711-0092
5
/16” HOSE
0711-0093
0711-0094
0711-0095
SUG.
RETAIL
DESCRIPTION
6’, stainless
6’, black
10’, stainless
12’ black
25’, stainless
SUG. RETAIL
$45.95
91.95
76.95
172.95
180.95
•Available in 3’, 6’, or 25’
lengths, stainless steel braided
hoses can be used
for any oil and gas applications
•Available in natural/silver color
PART #
DESCRIPTION
DS-096605
1
DS-096615
SUG. RETAIL
DS-096612
PART #
DESCRIPTION
$18.95
DS-096613
5
$167.95
1
34.95
DS-096607
3
22.95
DS-096612
1
139.95
DS-096617
3
44.95
DS-096606
5
21.95
DS-096614
3
167.95
DS-096616
5
39.95
/4” x 3’
/4” x 6’
/4” x 25’
/16” x 3’
/16” x 6’
/16” x 25’
/8” x 3’
/8” x 6’
/8” x 25’
SUG. RETAIL
SECTION
15
WINDSHIELDS
TOURING
BLACK BRAIDED HOSE
•Hose features a black nylon braided covering
•Suitable for either gas or oil applications
•Available in various sizes and lengths
PART #
DS-096671
DS-096672
DS-096673
DS-096676
DS-096677
BRAIDED FUEL/OIL LINE BUILDERS VALUE PACK
DESCRIPTION
1/4” x 6’
5/16” x 6’
3/8” x 6’
3/8” x 25’
1/2” x 3’ (For oil tank drains)
SUG. RETAIL
$31.95
32.95
34.95
148.95
26.95
BRAIDED FUEL/OIL LINE
•Features Sterling Chromite® II,
the patented exclusive braid that
looks like chrome
•Perfectly matches color and
weave of all other Magnum
Sterling Chromite II cables and lines
•High quality clear covering won’t discolor and makes cleaning easy
•Premium quality hose uses a tough polyester inner reinforcement braid
for high burst strength
•Cuts easily with scissors
•Available in two sizes
NOTE: Magnum connectors
must be used with Magnum
braided line.
PART #
0711-0026
0711-0028
DESCRIPTION
1/4” x 6’
3/8” x 6’
SUG. RETAIL
$76.95
81.95
FUEL/OIL LINE
•Reinforced, synthetic
rubber, smooth-bore
line is fuel- and
oil-resistant
PART #
DESCRIPTION
DS-06226 3/8” x 25’ roll
DS-05226 5/16” x 25’ roll
SUG. RETAIL
$37.95
34.95
PART #
DESCRIPTION
DS-04226 1/4” x 25’ roll
SUG. RETAIL
$33.95
•Only Sterling Chromite II uses patented technology to create an exclusive
braid that looks like chrome
•Perfectly matches color and weave of Magnum Sterling Chromite II
cables and lines
•Sterling Chromite II has a high-quality clear covering that won’t discolor
and makes cleaning easy
•Contains premium quality hose with a tough polyester inner
reinforcement braid for high burst strength
•Each builders value pack contains short pre-cut hoses in lengths most
needed for basic construction of oil or fuel lines at a cost savings
•PART # 0711-0087 include three pieces of 15”, 18” and 24”
•PART # 0711-0089 includes four pieces of 15”, three pieces of 18”, two
pieces of 24” and one piece of 30”
•Builders value packs provide
PART #
SIZE
SUG. RETAIL
hose for multiple bike builds
1/4”
$131.95
0711-0087
•Trims easily with scissors
3/8”
158.95
0711-0089
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
STERLING CHROMITE®
BRAIDED FUEL/OIL LINE
•Only Sterling Chromite uses the patented
technology to create an exclusive braid
that looks like chrome
•Has identical high-quality features of
Sterling Chromite fuel and oil line without
the clear covering
•Premium quality hose uses a tough
polyester inner reinforcement braid for
high-burst strength
•Cuts easily with scissors
•Bright Candy Apple Red color;
STERLING CHROMITE® CANDY APPLE
available in three sizes
RED BRAIDED FUEL/OIL LINE
PART #
DESCRIPTION SUG. RETAIL
NOTE: Magnum connectors
$54.95
0711-0018 1/4’’ x 6’
must be used with Magnum
0711-0022 3/8” x 6’
59.95
braided line.
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
BLUE-LINE FUEL LINE
•Dual-layer design has a
fuel-resistant inner hose with
chemical-, ozone- and
heat-resistant outer hose
•Includes three 10’ lengths
•Not for use with fuel-injected models
PART #
DESCRIPTION
0706-0033 3/16”
SUG. RETAIL
$44.95
UNIVERSAL FUEL/
OIL LINE
•Universal, black fuel/oil
line in 25’ rolls
•Reinforced line is fuel- and oil-resistant
PART #
DESCRIPTION
0706-0032 1/4”
SUG. RETAIL
$56.95
JPS BLUE
POLYURETHANE
FUEL LINE
1/8” i.d. x 25’
$6.95
3/16” i.d. x 25’
11.95
3/16” i.d. x 100’
44.95
1/4” i.d. x 25’
14.95
PART #
1508-100
1510
1510-100
1/4” i.d. x 100’
$56.95
5/16” i.d. x 25’
17.95
5/16” i.d. x 100’
73.95
BRAKES
TANKS &
OIL FILTERS
•Stronger and
more durable
than vinyl fuel line
•Use with any type of gasoline
•Resists swelling and hardening
•Resistant to direct sunlight,
hardening and/or cracking
•Flexible in temperatures from
-35 F to +165° F
•Fuel line stretches easily over
fittings or petcocks
•Sold in 3’ lengths and 25’ rolls
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
NOTE: Not for use with fuel-injected models.
FUEL AND CARBURETOR VENT LINE
•High-quality polyurethane construction – will
not harden or crack
•Fuel line available in 1/4” and 3/16” i.d.;
carburetor vent line available in 1/8” i.d.
•Choice of clear or black
•Fuel line available in 3’ lengths
•Carb vent line comes in 5’ lengths
PART #
DESCRIPTION
FUEL LINE, 3’
1/4”, clear
M6219
M62191 1/4”, black
3/16”, clear
M6209
M62091 3/16”, black
SUG. RETAIL
$6.95
6.95
6.95
6.95
PART #
DESCRIPTION
CARB VENT LINE, 5’
1/8”, clear
M6109
M61091 1/8”, black
CABLES
PART #
0711-0062 3/8” x 25’
$29.95
PREMIUM
FUEL LINE
•High-quality, transparent blue polyurethane
line designed for demanding uses
•Strong, tough, kink- and abrasion-resistant,
yet flexible and easily processed in
assembly operations
•Exceptional chemical resistance including gasoline, grease and oil
•High tensile strength; withstands temperatures from -65°F to 220°F
without deterioration
PART #
1509
1507
1507-100
1508
PART #
0711-0060 1/4” x 25’
$23.95
0711-0061 5/16” x 25’
26.95
HANDLEBARS,
CONTROLS
& MIRRORS
SUG. RETAIL
$8.95
8.95
SUG.
PART #
DESCRIPTION
RETAIL
3/16” I.D. X 5/16” O.D. – 3’ LENGTHS
0706-0038 Gray
$8.95
0706-0041 Clear
8.95
0706-0044 Black
8.95
1/4” I.D. X 7/16” O.D. – 3’ LENGTHS
0706-0039 Gray
12.95
0706-0042 Clear
12.95
0706-0045 Black
12.95
5/16” X 1/2” O.D. – 3’ LENGTHS
0706-0040 Gray
14.95
0706-0043 Clear
14.95
0706-0046 Black
14.95
SUG.
PART #
DESCRIPTION
RETAIL
3/16” I.D. X 5/16” O.D. – 25’ ROLLS
MP12-031 Gray
$50.95
0706-0021 Clear
50.95
0706-0018 Black
50.95
1/4” I.D. X 7/16” O.D. – 25’ ROLLS
MP12-032 Gray
79.95
0706-0022 Clear
83.95
0706-0019 Black
83.95
5/16” X 1/2” O.D. – 25’ ROLLS
MP12-033 Gray
87.95
0706-0023 Clear
91.95
0706-0020 Black
91.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
917
SECTION
15
POLISHED
CHROME
HOSE
CONNECTORS
1902-0033
1902-0032
WINDSHIELDS
HOSE PROTECTORS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
•Protect vulnerable and
exposed hoses and lines
•Approximately 10” long; can
be stretched or compressed
to custom fit your application
•Made from stainless
spring steel
•Available in several sizes
•Sold each
•Smooth,
polished style
•Puts a finishing touch on any
hose installation
•Includes stainless steel worm-gear clamps
•Very affordably priced
GROOVED CHROME HOSE
ENDS WITH CLAMPS
•Grooved hose end clamps give
a finished look to rubber or
braided oil/gas lines
•Sold to dealers in 6-pack
1902-0031
SUG.
DESCRIPTION
RETAIL
1
$9.95
9mm i.d. (fits /4” fuel line)
11mm i.d. (fits 7/16” o.d. fuel line) 9.95
25mm i.d.
(fits 1” o.d. radiator hose)
10.95
1902-0030 38mm i.d.
10.95
(fits 11/2” o.d. radiator hose)
PART #
DS-096608
DS-096609
DESCRIPTION
5/16”, 3/8” hose ends
1/4” hose ends
SUG. RETAIL
$4.95 (ea.)
4.95 (ea.)
PART #
1902-0033
1902-0032
1902-0031
WIRE CLAMPS
•Self-tensioning wire hose clamps for fuel
or vacuum lines
•Quality plated steel for long-lasting durability
and function
•15-piece assortment pack offers 5 each of 1/4”,
5/16” and 7/16” i.d. clamps
•150-piece assortment pack offers 50 of each size
PART #
M30040
M30041
DESCRIPTION
15-pc.
150-pc.
•Available in chromeplated or black steel, or
red or blue
anodized aluminum
•Made in the U.K.
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
918
•Stainless steel with a black finish
•Sold in 10-pk.
PART #
DESCRIPTION
0713-0055 Universal hose clamps
SUG. RETAIL
$12.95
PART #
936-04DB
936-04DCH
936-07DB
936-07DCH
936-07DR
0711-0161
DESCRIPTION
blue
1/4” chrome
5/16” , 3/8” blue
5/16”, 3/8” chrome
5/16”, 3/8” red
5/16”, 3/8” black
1/4”
SUG. RETAIL
$4.95
4.95
4.95
4.95
4.95
6.95
$36.95
43.95
36.95
36.95
PART #
DS-2152
DESCRIPTION
Mini hose clamps
DS-096660
SUG. RETAIL
$1.25 (ea.)
DS-096656
ECONO-SEAL™
HOSE ENDS
WITH CLAMPS
•These easy-to-use clamps give braided and
black rubber hoses a custom look
•Available in chrome, red and blue anodized
finishes in two different sizes
•Sold in packs of six
PART #
DS-096602
PART #
DS-096651
DS-096655
DS-096657
DS-096652
DS-096660
DS-096656
DESCRIPTION
Radius
SUG. RETAIL
$39.95
SUG.
DESCRIPTION
RETAIL
1/4” i.d. hose, chrome
$34.95
1/4” i.d. hose, red anodized
27.95
1/4” i.d. hose, blue anodized
27.95
5/16”, 3/8” i.d. hose, chrome
34.95
5/16”,3/8” i.d. hose, red anodized
27.95
5/16”,3/8” i.d. hose, blue anodized 27.95
Copper
Black
Silver
PART #
DESCRIPTION
FOR 3/8” OIL LINE
0706-0048
Black
0706-0050
Copper
0706-0052
Silver
0706-0054
Brass
Brass
SUG. RETAIL
$36.95
43.95
36.95
36.95
OIL AND FUEL LINE
CLAMP/SPLICE KIT
•Heavy-duty forged crimping tool can be used
from end or side and works in tight places
•Includes the following: 30 each of 1/4”, 5/16” and 3/8” i.d. hose clamps;
one 1/2” i.d. clamp for oil drain hose on late model bikes; five each of
special 1/4”, 5/16” and ten 3/8” stainless steel splice connectors
•1/4”, 3/8” and 1/2” clamps are conventional one-ear style
•1/4”, 5/16” and 3/8” clamps are Stepless® style for a full 360°
closure around hose with no gaps
PART #
DS-390302
DS-390306
DS-390307
DS-390308
DS-390309
DS-390310
DS-390311
DS-390312
•Designed for use on oil
and gas lines up to 3/8” in diameter
•Made in the U.S.A.; sold in packs of ten
•High-tech separators are a superclean way
to neatly separate and route any 3/8” or 5/16”
stainless steel or rubber oil lines
•Machined from aluminum with a chrome finish
•Sold in pairs
•Custom colored hose clamps designed for
use with braided copper and stainless steel
hoses and fit over most manufacturer’s
braided rubber hoses
•Extruded from brass and finished with a matte
metallic powder-coat
•Sold in packs of six – an average FXST or custom bike will use
a minimum of six oil line clamps and two fuel line clamps
SUG. RETAIL
SUG.
DESCRIPTION
RETAIL
1
5
For /4”, /16” hose ends (2-pk.) $16.95
For 1/4”, 5/16” hose ends (6-pk.) 34.95
For 3/8” hose ends (2-pk.)
16.95
For 3/8” hose ends (6-pk.)
34.95
DS-096652
COLORED HOSE CLAMPS
PART #
DESCRIPTION
FOR 1/4” AND 5/16” FUEL LINE
0706-0047
Black
0706-0049
Copper
0706-0051
Silver
0706-0053
Brass
PART #
DS-096601
DS-096598
DS-096600
DS-096599
STAINLESS STEEL
MINI-CLAMPS
OIL LINE SEPARATORS
HOSE CLAMPS
NOTE: Magnum connectors must be used with
Magnum braided line.
FINISHERS
SUG. RETAIL
$7.95
23.95
LIGHTING
DS-096598
DESCRIPTION
Clamp/hose splice kit w/ crimper tool (ea.)
Repl. 1/4” Stepless® heavy-duty clamp (100-pk.); repl. OEM #10014A
Repl. 5/16” Stepless® heavy-duty clamp (100-pk.)
Repl. 3/8” Stepless® heavy-duty clamp (100-pk.); repl. OEM #10080
Repl. 1/4” one-ear conventional clamp (100-pk.); repl. OEM #10014
Repl. 3/8” one-ear conventional clamp (100-pk.); repl. OEM #10020A
Repl. 1/2” one-ear conventional clamp (100-pk.); repl. OEM #10086
Side- or end-type clamp crimper tool (ea.)
SUG. RETAIL
$191.95
0.65
0.65
0.65
0.35
0.35
0.45
49.95
FUEL LINE
FITTINGS KIT
•Contains the parts
needed to service any
fuel line routing
•Includes 40 assorted O-clips, 40 assorted
Y-connectors, 40 assorted T-connectors, hose
clamps and an O-clip pincher tool
•O-clip pincher tool and O-clips also
•Includes convenient storage case
SUG.
PART #
DESCRIPTION
RETAIL
MP12-034 Fuel line fitting kit
$226.95
2401-0390 5/16” O-clips for 3/16” hose
(10-pk.)
6.95
2401-0095 7/16” O-clips for 1/4” hose
(10-pk.)
6.95
2401-0096 1/2” O-clips for 5/16” hose
(10-pk.)
7.95
2401-0391 9/16” O-clips for 3/8” hose
(10-pk.)
7.95
3801-0034 O-clip pincher tool
18.95

Customs-Planet

Transcription

Similar documents

2015 TM - GUTSCHROME

Publication - BSN Sports

Section 8 - Jireh Cycles