Hand Tools 178 ALLEN KEYS

Transcription

Hand Tools
178
ALLEN KEYS
BONDHUS® Ballpoint Hex Key L-Wrench-USA
ALK 0001
Proguard (DST) Black Finish Briteguard Chrome Finish
Code
1
Size (mm)
Code
- Made of Protanium High Torque Steel
- Driven through 1/4” steel plate without distortion
Size (mm)
Code
Size (inch)
Code
Size (inch)
7/32”
1.27
11
6.0
21
0.05”
30
2
1.5
12
7.0
22
1/16”
31
1/4”
3
2.0
13
8.0
23
5/64”
32
5/16”
4
2.5
14
9.0
42
3/32”
33
3/8”
5
3.0
15
10.0
25
7/64”
34
7/16”
6
3.5
16
11.0
26
1/8”
35
1/2”
7
4.0
17
12.0
27
9/64”
36
9/16”
8
4.5
18
14.0
28
5/32”
37
5/8”
9
5.0
19
17.0
29
3/16”
38
3/4”
5.5
20
19.0
10
Ball L-Wrench (Long Arm)
1
Description
Finish
Code
Item 10946 (BLX6M) - 6pcs
Black
6
Item 17046 (BLX6MB) - 6pcs
Chrome
Item 38046 (BLX6MG) - 6pcs
Gold Plated
Black
Chrome
Gold Plated
7
3
Black
Chrome
Gold Plated
Ball L-Wrench Set (Long Arm)
Black
Chrome
Gold Plated
1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5,
5.5, 6, 7, 8, 9, 10mm
5
Sets are ideal when a variety of tool sizes are required;
red case for metric, yellow case for inches.
Item 10945 (BLX7) - 7pcs
5/64”, 3/32”, 7/64”, 1/8”, 9/64”,
5/32”, 3/16”
Black
Item 10938 (BLX10) - 10pcs
Black
Item 16938 (BLX10B) - 10pcs
Chrome
Item 37938 (BLX10G) - 10pcs
Gold Plated
Item 10936 (BLX12) - 12pcs
Black
Chrome
Gold Plated
0.050, 1/16”, 5/64”, 3/32”, 7/64”,
1/8”, 9/64”, 5/32”, 3/16”, 7/32”,
1/4”, 5/16”
1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
4
Black
1/16”, 5/64”, 3/32”, 7/64”, 1/8”,
9/64”, 5/32”, 3/16”, 7/32”, 1/4”
8
1.5, 2, 2.5, 3, 4, 5, 6mm
Finish
0.050, 1/16”, 5/64”, 3/32”, 7/64”,
1/8”, 9/64”, 5/32”
1.5, 2, 2.5, 3, 4, 5mm
2
Description
Item 10932 (BLX8) - 8pcs
9
Item 10937 (BLX13) - 13pcs
Black
Chrome
Gold Plated
0.050, 1/16”, 5/64”, 3/32”, 7/64”,
1/8”, 9/64”, 5/32”, 3/16”, 7/32”,
1/4”, 5/16”, 3/8”
Hand Tools
Code
11
ALK 0002
179
Hand Tools
ALLEN KEYS
BONDHUS® Hex Key L-Wrench Set-USA
ALK 0003
Code
1
Description
Long Arm
Finish
Code
Item 12146 (HLX6M) - 6pcs
Black
10
Chrome
Black
Item 17192 (HLX7MB) - 7pcs
Chrome
Item 12132 (HLX8) - 8pcs
11
12
Black
Chrome
6
Black
Chrome
Item 12145 (HLX7) - 7pcs
Black
5/64”, 3/32”, 7/64”, 1/8”, 9/64”,
5/32”, 3/16”
7
Item 12136 (HLX12) - 12pcs
Black
Item 16136 (HLX12B) - 12pcs
Chrome
0.050”, 1/16”, 5/64”, 3/32”, 7/64”,
1/8”, 9/64”, 5/32”, 3/16”, 7/32”,
1/4”, 5/16”
8
Hand Tools
- Made of Protanium High Torque Steel
- Driven through 1/4” steel plate without distortion
- Red for metric, Yellow for inches
Black
Item 16292 (HLX7MSB) - 7pcs
Chrome
14
Black
Chrome
Black
Chrome
Item 12245 (HLX7S) - 7pcs
Black
Black
Item 16236 (HLX12SB) - 12pcs
Chrome
0.050, 1/16”, 5/64”, 3/32”,
7/64”,1/8”, 9/64”, 5/32”, 3/16”,
7/32”, 1/4”, 5/16”
15
Black
Chrome
0.050, 1/16”, 5/64”, 3/32”,
7/64”,1/8”, 9/64”, 5/32”, 3/16”,
7/32”, 1/4”, 5/16”, 3/8”
16
Item 12137 (HLX13) - 13pcs
Item 12299 (HLX9MS) - 9pcs
5/64”, 3/32”, 7/64”, 1/8”, 9/64”,
5/32”, 3/16”
1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5,
5.5, 6, 7, 8, 9, 10mm
Hex L-Wrench Set (Short & Long Arm)
Item 12292 (HLX7MS) - 7pcs
1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
13
1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
5
Black
Chrome
1.5, 2, 2.5, 3, 4, 5, 6mm
Black
0.050”, 1/16”, 5/64”, 3/32”, 7/64”,
1/8”, 9/64”, 5/32”
4
Finish
1.5, 2, 2.5, 3, 4, 5mm
1.5, 2, 2.5, 3, 4, 5, 6mm
3
1.5, 2, 2.5, 3, 4, 5mm
2
Description
Long Arm
Chrome
1/16”, 5/64”, 3/32”, 7/64”,1/8”,
9/64”, 5/32”, 3/16”, 7/32”, 1/4”
0.050, 1/16”, 5/64”, 3/32”,
7/64”,1/8”, 9/64”, 5/32”, 3/16”,
7/32”, 1/4”, 5/16”, 3/8”
9
11
Item 12138 (HLX10) - 10pcs
Black
Chrome
1/16”, 5/64”, 3/32”, 7/64”, 1/8”,
9/64”, 5/32”, 3/16”, 7/32”, 1/4”
EIGHT Hex L-Wrench In Roll Type
Vinyl Wallet- Japan
EIGHT Hex L-Wrench In Vinyl Pouch - Japan
ALK 0004
Black Finish
Black Finish
Roll Type Vinyl Wallet
Code
1
Description
Item 008-1- 9pcs
ALK 0005
Code
10/60
1
1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
2
Item 008-2- 10pcs
Black Finish
Vinyl Pouch
Box/Ctn
Description
Item M-7M- 7pcs
Vinyl Pouch
Box/Ctn
Code
20/-
1
2
1/16”, 5/64”, 3/32”, 1/8”, 5/32”,
3/16”, 7/32”, 1/4”, 5/16”, 3/8”
Item M-7Z- 7pcs
20/-
0.035”, 0.050”, 1/16”, 5/64”,
3/32”, 7/64”, 1/8”
3
Item M-8Z- 8pcs
0.028”, 0.035”, 0.050, 1/16”,
5/64”, 3/32”, 7/64”, 1/8”
Description
Box/Ctn
Item 002-2- 8pcs
12/120
1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm
0.71, 0.89, 1.27, 1.5, 2, 2.5, 3mm
10/60
ALK 0006
2
Item 002-3- 8pcs
12/72
2, 2.5, 3, 4, 5, 6, 8, 10mm
3
Item 002-4- 10pcs
12/72
1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8, 10mm
20/4
Item 002-5- 10pcs
6/36
1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12mm
5
Item 002-9- 8pcs
12/120
1/16”, 5/64”, 3/32”, 1/8”, 5/32”,
3/16”, 7/32”, 1/4”
6
Item 002-11- 10pcs
12/72
1/16”, 5/64”, 3/32”, 1/8”, 5/32”,
3/16”, 7/32”, 1/4”, 5/16”, 3/8”
7
Item 002-12- 10pcs
1/16”, 5/64”, 3/32”, 1/8”, 5/32”,
3/16”, 7/32”, 5/16”, 3/8”, 1/2”
6/36
Hand Tools
180
ALLEN KEYS
EIGHT Ring Type Hex L-Wrench Set - Japan
ALK 0007
ALK 0008
Black Finish
Black Finish
Vinyl Kit
Blister Pack
Code
1
Description
Box/Ctn
Code
Item 004-1- 8pcs
12/120
1
Item 004-2- 8pcs
12/72
2
Item 004-3- 10pcs
12/72
3
Item 004-4- 8pcs
12/120
1/16”, 5/64”, 3/32”, 1/8”, 5/32”,
3/16”, 7/32”, 1/4”
5
Item 004-5- 8pcs
Item 004-6- 10pcs
Code
Item 004-1P- 8pcs
10/120
1
10/60
2
Item 004-3P- 10pcs
Item 004-4P- 8pcs
Description
Item 004-2NP- 8pcs
Box/Ctn
10/60
2, 2.5, 3, 4, 5, 6, 8, 10mm
10/120
Item 004-5NP- 8pcs
10/60
3/32”, 1/8”, 5/32”, 3/16”, 7/32”,
1/4” 5/16”, 3/8”
7/32”, 1/4”
4
12/72
Item 004-6P- 10pcs
10/60
1/16”, 5/64”, 3/32”, 1/8”, 5/32”,
3/16”,
7/32”, 1/4”, 5/16”, 3/8”
3/32”, 1/8”, 5/32”, 3/16”, 7/32”,
1/4”, 5/16”, 3/8”
6
Box/Ctn
1/16”, 5/64”, 3/32”, 1/8”, 5/32”,
3/16”,
1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8, 10mm
4
Plastic Ring Type
Description
1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8, 10mm
2, 2.5, 3, 4, 5, 6, 8, 10mm
3
Hard-Chrome Plated
1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm
1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm
2
ALK 0009
12/72
11
All the above are made of special version of S.N.C.M. + V alloy steel, Hardness : Rockwell “C” Scale 51° ~ 61° degree.
Hand Tools
1/16”, 5/64”, 3/32”, 1/8”, 5/32”,
3/16”, 7/32”, 1/4”, 5/16”, 3/8”
181
Hand Tools
ALLEN KEYS
Bondhus® Fold-Up Hex Key Wrench Set-USA
ALK 0010
Balldriver Tip
Code
1
Description
Item 12897 (BF5M) - 5pcs
ALK 0011
Star Tip
Type
Code
Balldriver
1
Ball End : 5, 6, 7, 8, 10mm
GorillaGrip ™
2
Red for metric, Yellow for inches and Green for torx.
Item 12894 (BF5) - 5pcs
Balldriver
Type
Item 12632 (TF8S) - 8pcs
Star
Star : T6, T7, T8, T9, T10, T15,
T20, T25
2
Ball End : 3/16”, 7/32”, 1/4”,
5/16”, 3/8”
ALK 0012
Description
Item 12634 (TF8) - 8pcs
Star
Star : T9, T10, T15, T20, T25, T27,
T30, T40
ALK 0013
Slotted
ALK 0014
Philip
Hex
Square
Awl
Hex Tip
Hand Tools
Code
1
Tamper Resistant Tip
Description
Type
Code
Item 12595 (HF6M) - 6pcs
Hex
1
Hex Key : 3, 4, 5, 6, 8, 10mm
2
11
Hex
Hex
Item 12585 (HF5) - 5pcs
Item 12638 (TR-TF8) - 8pcs
Tamper Resistant Star-Recessed
Item 12591 (HF9S) - 9pcs
Tamper
Item 12589 (HF9) - 9pcs
2
Tamper
Resistant
Item 12550 (HF12) - 12pcs
Hex Key : 1.5, 2, 2.5, 3, 4, 5mm,
5/64”, 3/32”, 7/64”, 1/8”, 9/64”,
5/32”
3
ALK 0015
Hex
Hex
Combination Set (14189)
Hex
Description
Item 14189 - Combination Set
(BLX13 + 12589)
Type
Balldriver
& Hex
4
Type
Item 12540 (HFU5) - 5pcs
Slotted,
(-)3/16”, #1. Hex : 4, 5, 6mm
Philip &
Hex
Item 12543 (RFU5) - 5pcs
Slotted,
(-)1/8”, 3/16”, #1, #2, Sq #2
Philip &
Square
Item 12545 (AFU5) - 5pcs
Slotted,
(-)1/8”, 3/16”, #1, #2, Awl
Philip &
Awl
Hex
Hex Key : 5/64”, 3/32”, 7/64”,
1/8”, 9.64”, 5/32”, 3/16”, 7/32”,
1/4”
7
Description
Resistant
Hex Key : 0.05”, 1/16”, 5/64”,
3/32”, 7/64”, 1/8”, 9/64”, 5/32”,
3/16”
6
1
TR-9, 10, 15, 20, 25, 27, 30, 40
Hex Key : 3/16”, 7/32”, 1/4”,
5/16”, 3/8”
5
Code
Type
TR-7, 8, 9, 10, 15, 20, 25
2
Hex Key : 2, 2.5, 3, 4, 5, 6, 8mm
4
Item 12636 (TR-TF7S) - 7pcs
Tamper Resistant Star-Recessed
Hex Key : 1.5, 2, 2.5, 3, 4, 5, 6mm
3
Description
Item 12547 (FU5) - 5pcs
Slotted,
(-)1/8”, 3/16”, 1/4”, #1, #2
& Philip
Hand Tools
182
CUTTERS
Tubular Handled Boltcutters
“HIT” Standard Bolt Cutter (Black Jaw)
ALK 0016
ALK 0017
High Tensile, Centre Cut, Cam
Adjusted
The cutter adjustment is by
eccentric (a cam bolt which adjusts
the cutter head when turned) to
compensate for blade wear.
Code Total Length
Max. Cutting
Capacity
1
14” (355mm) 3/16” / 5.0mm
2
18” (460mm)
3
24” (610mm) 5/16” / 7.9mm
4
30” (762mm)
3/8” / 9.5mm
5
36” (915mm)
7/16” / 11.1m
12”
14”
18”
1/4” / 6.4mm
“HIT” Bolt Cutter With Insulated
Fiberglass Handle
“HIT” High Tensile Steel Cutter
(Red Jaw) For Extra Hard Steel
(CLIPPER CUT)
ALK 0018
ALK 0019
* HEAD W/BOLTS
& NUTS
(CENTER CUT)
24”
30”
36”
42”
Recommended for general use. Suitable for concrete
reinforcing rods, medium tensile and soft bolts, rods,
rivets, bars, chain, etc. Max. permissible hardness :
Brinell 370, Rockwell C40, 85 tons/sq. 133kg/mm2.
*All HIT bolt cutters exceed U.S.A. Federal Specification
No. GGG-C-740d Type II.
1. Loosen nuts on cam
bolts about one round
(360º)
This new insulated fiberglass handle bolt cutter is
specially made for electric and construction work.
Cutting Capacity
Code
2. Align cutter jaws by
rotating the cam bolts;
move arrows on cam
bolt inward to close jaw.
Length
(mm)
49.6
kg/mm2
Ø (mm)
HRC-40
133
kg/mm2
Ø (mm)
1
450 (18”)
8
6
2
600 (24”)
10
8
3. Tighten nuts.
High Tensile Jaws are specially heat-treated. Suitable
for cutting very hard material. They have a short
cutting edge to accommodate chain links, high tensile
bolts, rods and high tensile wire for pre-stressed
concrete, cold drawn alloy steel wire, tempered spring
wire, case-hardened chains, etc.
Maximum permissible hardness : Brinell 450, Rockwell
C48, 110 tons/sq. 162kg/mm2.
“HIT” Pocket Cutter Series
Pocket Angular Cutter
ALK 0020-1
Length
(mm)
49.6
kg/mm2
Ø (mm)
HRC-40
133
kg/mm2
Ø (mm)
1
300 (12”)
5
4
2
350 (14”)
7
5
3
450 (18”)
8
6
4
600 (24”)
10
8
5
750 (30”)
13
9
6
900 (36”)
16
10
7
1050 (42”)
19
11
Spare Heads w/Bolts & Nuts
8
300 (12”)
5
4
9
350 (14”)
7
5
10
450 (18”)
8
6
11
600 (24”)
10
8
12
750 (30”)
13
9
13
900 (36”)
16
10
14
1050 (42”)
19
11
PA-200
Pocket Cutter
ALK 0020-2
“HIT” Angular Cutter
Cutting Capacity
Code
Length
(mm)
49.6
kg/mm2
Ø (mm)
ALK 0021
HRC-48
162
kg/mm2
Ø (mm)
PC-200
Pocket End Cutter
ALK 0020-3
High Tensile Steel Cutter
1
300 (12”)
5
4
2
350 (14”)
7
5
3
450 (18”)
8
5.5
4
600 (24”)
10
7
5
750 (30”)
13
8
6
900 (36”)
16
9
7
1050 (42”)
19
10
PE-200
Pocket Cutter For Piano Wire
ALK 0020-4
Flush cutting for wires in concrete walls, ceilings, floor etc.
PH-200
Special alloy hardened and tempered cutter blade.
Lightweight, comfortable grip and spring action.
Spare Heads w/Bolts & Nuts
Cutting Capacity
Code
Length
(mm)
49.6
kg/mm2
Ø (mm)
HRC-40
133
kg/mm2
Ø (mm)
Max. Cutting Capacity
8
300 (12”)
5
4
9
350 (14”)
7
5
10
450 (18”)
8
5.5
11
600 (24”)
10
7
12
750 (30”)
13
Code
Mild Steel
HRC
Brinell 140
Ø (mm)
Hard Steel
HRC 40
Brinell 370
Ø (mm)
Music Wire
HRC 44
Brinell 410
Ø (mm)
1
350 (14”)
7
5
2
450 (18”)
8
6
1
3.5
2
-
3
600 (24”)
10
7
8
2
4
2
-
4
Spare Jaws w/bolts & nuts for AC350
13
900 (36”)
16
9
3
3.5
2
-
5
14
1050 (42”)
19
10
4
4
3
2.5
6
11
This is the
adjusting bolt
(eccentric bolt)
for cutting edge.
Code
Hand Tools
Cutting Capacity
How to adjust cutting edge
183
Hand Tools
CUTTERS
“HIT” Rod Cutter
The most dependable forester makes light work of the
heaviest pruning.
RC-13BN ALK 0022-1
RC-16BN ALK 0022-2
(With Extendible handle)
RC-19B ALK 0022-3
Code
Length
(mm)
Cutting Capacity
Ø (mm)
ALK 0022-1
1070 (42”)
13 (1/2”)
ALK 0022-2
1320 (52”)
16 (5/8”)
ALK 0022-3
1320-2032 (52” - 80”)
19 (3/4”)
ALK 0022-4
Bolts & Nuts for RC13BN
ALK 0022-5
Bolts & Nuts for RC16BN
ALK 0022-6
Bolts & Nuts for RC19B
ALK 0022-7
Spare Jaws w/bolts & nuts for RC13BN
ALK 0022-8
Spare Jaws w/bolts & nuts for RC16BN
ALK 0022-9
Spare Jaws w/bolts & nuts for RC19B
“HIT” Circlip Plier
Bent Nose - Internal
Bent Nose - External
ALK 0023-1
ALK 0023-2
RHB-175
Code
Length
(mm)
Type
Capacity
(mm)
ALK 0023-1
ALK 0023-2
165
Internal-Bent
12-65
175
Internal-Straight
12-65
ALK 0023-3
165
External-Bent
10-40
ALK 0023-4
175
External-Straight
10-40
RSB-175
Straight Nose - Internal
Straight Nose - External
ALK 0023-3
ALK 0023-4
Hand Tools
RHS-175
RSS-175
“HIT” Wire Rope Cutter
11
ALK 0025
HWC-6 ALK 0024-1
Notched shear-cut blades hold and lock wire in
cutting position and gives clean, sharp cut.
Designed for cutting wire rope, piano wire, steel
wire, ACSR cable and aircraft cable.
HWC-9 ALK 0024-2
ALK 0026
W-16
For cutting all soft or hard steel cable and wire rope.
Cutting Capacity
Code
Length
(mm)
Capacity
Ø (mm)
1
600
10
2
750
14
1
3
900
16
2
4
1050
20
5
Spare Jaws for WC10
6
Spare Jaws for WC14
7
Spare Jaws for WC16
8
Spare Jaws for WC20
Code
Length
(mm)
Copper/
Alum.
(mm2)
Wire
Rope
Ø (mm)
ACSR
Cable
(mm2)
710
250
(26mmØ)
16
120
Bolts & Nut for W-16
HWC-12 ALK 0024-3, HWC-16 ALK 0024-4
Designed for cutting wire without crushing and deformation.
“HIT” New Cable Cutter
Code
Length
(mm)
ALK 0024-1
190
6
2.5
4
ALK 0024-2
335
9
4.0
ALK 0024-3
520
12
ALK 0024-4
650
16
Wire
Piano
Steel
ACSR
Rope
Wire
Wire
Cable
Ø (mm) Ø (mm) Ø (mm) (mm2)
Code
Length
(mm)
Alum.
Cable
(mm2)
Copper
Cable
(mm2)
Ø
(mm)
-
ALK 0027-1
450
150
150
20
6
25
ALK 0027-2
760
325
325
30
4.5
7
58
ALK 0027-3
1050
500
500
50
5.0
9
120
ALK 0027-4
Spare Jaws for CC-20
ALK 0027-5
ALK 0027-6
ALK 0024-5
Spare Jaws for HWC12
ALK 0024-6
Spare Jaws for HWC16
CC-20 ALK 0027-1
CC-50 ALK 0027-3
CC-30 ALK 0027-2
Hand Tools
CUTTERS
“HIT” Cable Cutter
184
“HIT” Cable Cutter With Insulated Fibreglass Handle
Insulated Fiberglass Handle
For cutting soft, non-steel, copper & aluminium cable.
Fibreglass handle is specially made for electric work.
Do not use on ACSR cable.
Code
SC-30 ALK 0028
Length
(mm)
240
ALK 0028
Alum.
Cable
(mm2)
Copper
Cable
(mm2)
Ø
(mm)
650
350
250
33
1
For cutting soft, non-steel, copper & aluminium cable. Do
not use on ACSR cable.
Code
Length
(mm)
Copper
IV Cable
38 mm2
Copper
WCT Cable
90 mm2
11.5mmØ
24.0mmØ
SCF-250 ALK 0029
2
Spare Jaws for SCF250 (same as SC-250R)
“HIT” Swaging Tool
ALK 0031
Sleeve
Wire
Rope
Template
Multi-compression hand swager with or without cable cutters.
Durable jaws are made from forged alloy steel with special heat treated and hardened.
SC-250R ALK 0030-1
SC-500R ALK 0030-2
Code
Length
(mm)
Alum.
Cable
(mm2)
Copper
Cable
(mm2)
Ø
(mm)
1
600
250
250
26
2
600
350
250
33
3
830
650
300
50
4
Bolts & Nut for SC-250 & SC250R
5
Bolts & Nut for SC-500R
6
Spare Jaws with bolts & nuts for SC-250R
7
Spare Jaws with bolts & nuts for SC-500R
Wire Rope Dia. For
Swagging & Cutting
Cutting
Capacity
ALK 0031-1
CT350/3
1/16”, 3/32”, 1/8”
w/o cutter
350
ALK 0031-2
CT350/3C
1/16”, 3/32”, 1/8”
1/8”
350
ALK 0031-3
CT600/5
1/16”, 3/32”, 1/8”, 5/32”, 3/16”
w/o cutter
600
ALK 0031-4
CT600/5C
1/16”, 3/32”, 1/8”, 5/32”, 3/16”
1/4”
600
ALK 0031-5
CT750/3
5/32”, 1/4”, 5/16”
w/o cutter
750
ALK 0031-6
CT750/3C
5/32”, 1/4”, 5/16”
5/16”
750
ALK 0031-7
CT900
3/8”
w/o cutter
900
Packing : 1 pc per box
“HIT” Heavy Duty Steel Strap Cutter
“HIT” Ratchet Cable Cutterz
ALK 0034
SS200 ALK 0033-1
“HIT” HOSE CUTTER
Lgth
(mm)
CCR 500
With a gear transmission mechanism, the cable
cutter requires less force for cutting cable and even
CV Wires up to 42mm diameter. Do not use on hard
copper, ACSR, steel & piano wire.
ALK 0032
Cutting Capacity
SS450 ALK 0033-2
Code
Length
(mm)
Ø (mm)
Kind of Cable
ALK 0034-1
185
42
IV Wire Single
Core 500mm2
HC-500
Designed to cut reinforced rubber hose by thin steel wire,
for application indoor City GAS Line/Lubrication Rubber
Hose etc.
Code
ALK 0032
Length
(mm)
Max. Cutting
Capacity
500
Hard Gas Hose
9.5, 13, 19, 25mm
CV Wire 3Core 100mm2
CV Wire Single
Bolt & nut
Core 500mm2
ALK 0034-2 Spare Fix Blade
SS600 ALK 0033-3
ALK 0034-3 Spare Movable Blade
Excellent for pallets, loading and unloading freight
cars, trucks and machines.
Code
Length
(mm)
Steel Strap
(mm)
ALK 0033-1
240
32 x 0.9
ALK 0033-2
450
50 x 1.2
ALK 0033-3
600
50 x 1.3
Spare bolt & nut for SS-600
ALK 0034-4 Spare Medium Gear Wheel #4
ALK 0034-5 Spare Small Gear Wheel #6
Hand Tools
Replaceable Jaws
Model
No.
11
Code
SC-250 ALK 0030-1
185
Hand Tools
FILES
American Pattern Files
Baiter Files
The American Pattern Files are also know as Engineer’s Files or BAITER Files are made in Switzerland and are made of finest quality stell
Machinist’s Files. They are generally used for fast material removal on with a high percentage of carbon and chromium which are essential for
metal. Available in single cut or double cut and various coarsenesses. the greater wear resistance of the files. In general, BAITER Files can be
divided into American Pattern Files and Swiss Patter Files.
Bastard
(Coarse)
Second Cut
(Medium)
Smooth
(Fine)
ALK 0035
Packing : 4” - 12” -- 12 pcs/box
14” -- 6 pcs/box
ALK 0036
Hand Tools
11
Packing : 1 pc
Code
Type
Lgth
Cut
Code
Type
Lgth
Cut
ALK 0035–1
Flat
4”
Bastard
ALK 0036-1
Flat
4”
Second Cut
ALK 0035–2
Flat
4”
Second Cut
ALK 0036-2
Flat
6”
Bastard
ALK 0035–3
Flat
4”
Smooth
ALK 0036-3
Flat
6”
Second Cut
ALK 0035–4
Flat
6”
Bastard
ALK 0036-4
Flat
8”
Bastard
ALK 0035–5
Flat
6”
Second Cut
ALK 0036-5
Flat
8”
Second Cut
ALK 0035–6
Flat
6”
Smooth
ALK 0036-6
Flat
10”
Bastard
ALK 0035–7
Flat
8”
Bastard
ALK 0036-7
Flat
10”
Second Cut
ALK 0035–8
Flat
8”
Second Cut
ALK 0036-8
Flat
12”
Bastard
ALK 0035–9
Flat
8”
Smooth
ALK 0036-9
Flat
12”
Second Cut
ALK 0035–10
Flat
10”
Bastard
ALK 0036-10
Flat
14”
Bastard
ALK 0035–11
Flat
10”
Second Cut
ALK 0035–12
Flat
10”
Smooth
ALK 0035–13
Flat
12”
Bastard
ALK 0035–14
Flat
12”
Second Cut
ALK 0035–15
Flat
12”
Smooth
ALK 0035–16
Flat
14”
Bastard
ALK 0035–17
Flat
14”
Second Cut
ALK 0035–18
Flat
14”
Smooth
“BAITER” HALF ROUND FILE BI-6
Useful for both flat and concave surfaces.
Baiter Files
ALK 0037
14” -- 6 pcs/box
ALK 0038
Packing : 1 pc
“BAITER” FLAT FILE BI-4
Commonly used on all types of metal work. Tapered in width and thickness. Double cut on
both sides. Single cut on both edges.
Code
Type
Lgth
Cut
Code
Type
Lgth
Cut
ALK 0037-1
Half Round
4”
Bastard
ALK 0038-1
Half Round
4”
Second Cut
ALK 0037-2
Half Round
4”
Second Cut
ALK 0038-2
Half Round
6”
Second Cut
ALK 0037-3
Half Round
4”
Smooth
ALK 0038-3
Half Round
8”
Bastard
ALK 0037–4
Half Round
6”
Bastard
ALK 0038-4
Half Round
8”
Second Cut
ALK 0037–5
Half Round
6”
Second Cut
ALK 0038-5
Half Round
10”
Bastard
ALK 0037–6
Half Round
6”
Smooth
ALK 0038-6
Half Round
10”
Second Cut
ALK 0037–7
Half Round
8”
Bastard
ALK 0038-7
Half Round
14”
Second Cut
ALK 0037–8
Half Round
8”
Second Cut
ALK 0037–9
Half Round
8”
Smooth
ALK 0037–10
Half Round
10”
Bastard
ALK 0037–11
Half Round
10”
Second Cut
ALK 0037–12
Half Round
10”
Smooth
ALK 0037–13
Half Round
12”
Bastard
ALK 0037–14
Half Round
12”
Second Cut
ALK 0037–15
Half Round
12”
Smooth
ALK 0037–16
Half Round
14”
Bastard
ALK 0037–17
Half Round
14”
Second Cut
ALK 0037–18
Half Round
14”
Smooth
Hand Tools
186
FILES
Baiter Files
ALK 0040
Packing : 1 pc
ALK 0041
Packing : 12 pcs/box
ALK 0042
Packing : 1 pc
ALK 0043
14” -- 6 pcs/box
ALK 0044
Packing : 1 pc
Code
Type
Lgth
Cut
Code
Type
Lgth
Cut
ALK 0039-1
Triangle
4”
Bastard
ALK 0040-1
Triangle
4”
Second Cut
ALK 0039-2
Triangle
4”
Second Cut
ALK 0040-2
Triangle
6”
Second Cut
ALK 0039-3
Triangle
4”
Smooth
ALK 0040-3
Triangle
8”
Second Cut
ALK 0039-4
Triangle
6”
Bastard
ALK 0040-4
Triangle
10”
Second Cut
ALK 0039-5
Triangle
6”
Second Cut
ALK 0040-5
Triangle
12”
Second Cut
ALK 0039-6
Triangle
6”
Smooth
ALK 0039-7
Triangle
8”
Bastard
ALK 0039-8
Triangle
8”
Second Cut
ALK 0039-9
Triangle
8”
Smooth
ALK 0039-10
Triangle
10”
Bastard
ALK 0039-11
Triangle
10”
Second Cut
ALK 0039-12
Triangle
10”
Smooth
ALK 0039-13
Triangle
12”
Bastard
ALK 0039-14
Triangle
12”
Second Cut
ALK 0039-15
Triangle
12”
Smooth
“BAITER” SQUARE FILE BI-8. For filing slots and keyways. Tapered slightly towards point.
Code
Type
Lgth
Cut
Code
Type
Lgth
Cut
ALK 0041-1
Square
4”
Bastard
ALK 00042-1
Square
4”
Second Cut
ALK 0041-2
Square
4”
Second Cut
ALK 00042-2
Square
6”
Second Cut
ALK 0041-3
Square
4”
Smooth
ALK 00042-3
Square
8”
Second Cut
ALK 0041-4
Square
6”
Bastard
ALK 00042-4
Square
10”
Second Cut
ALK 0041-5
Square
6”
Second Cut
ALK 00042-5
Square
12”
Second Cut
ALK 0041-6
Square
6”
Smooth
ALK 0041-7
Square
8”
Bastard
ALK 0041-8
Square
8”
Second Cut
ALK 0041-9
Square
8”
Smooth
ALK 0041-10
Square
10”
Bastard
ALK 0041-11
Square
10”
Second Cut
ALK 0041-12
Square
10”
Smooth
ALK 0041-13
Square
12”
Bastard
ALK 0041-14
Square
12”
Second Cut
“BAITER ROUND FILE BI-9. For filing holes or concave suarfaces.
Code
Type
Lgth
ALK 0043-1
Round
ALK 0043-2
Round
ALK 0043-3
Hand Tools
Packing : 12 pcs/box
“BAITER” TRIANGULAR FILE BI-7. For filing acute angle. Double Cut.
11
ALK 0039
Cut
Code
Type
Lgth
Cut
4”
Bastard
ALK 0044-1
Round
4”
Second Cut
4”
Second Cut
ALK 0044-2
Round
6”
Second Cut
Round
4”
Smooth
ALK 0044-3
Round
8”
Bastard
ALK 0043-4
Round
6”
Bastard
ALK 0044-4
Round
8”
Second Cut
ALK 0043-5
Round
6”
Second Cut
ALK 0044-5
Round
10”
Bastard
ALK 0043-6
Round
6”
Smooth
ALK 0044-6
Round
10”
Second Cut
ALK 0043-7
Round
8”
Bastard
ALK 0044-7
Round
12”
Second Cut
ALK 0043-8
Round
8”
Second Cut
ALK 0043-9
Round
8”
Smooth
ALK 0043-10
Round
10”
Bastard
ALK 0043-11
Round
10”
Second Cut
ALK 0043-12
Round
10”
Smooth
ALK 0043-13
Round
12”
Bastard
ALK 0043-14
Round
12”
Second Cut
ALK 0043-15
Round
12”
Smooth
ALK 0043-16
Round
14”
Bastard
ALK 0043-17
Round
14”
Second Cut
187
Hand Tools
FILES
Baiter Files
ALK 0045
“BAITER” 5-PIECE FILE SET NO. 550/1
5-piece file set contains one each of hand, halfround, three-square, square and round. All files
are second cut, with plastic handles, and are packed in a plastic pouch.
Code
Type
Length
Cut
ALK 0045-1
5-pc set
6”
Second Cut
ALK 0045-2
5-pc set
8”
Second Cut
Contents of 5-Pc Set: Hand, Half Round, Three Square,
Square & Round.
ALK 0046
“BAITER” PRECISION NEEDLE FILE SET NF-148 AND NF-158
Cut range from No. 00 (the coarsest), No. 0, No. 1, No. 2, No. 3, No. 4 to No. 6 (the finest).
Code
Type
Length
Cut
ALK 0046-1
12 pc Needle File Set
6”
No. 0
ALK 0046-2
6”
No. 2
ALK 0046-3
6”
No. 0
ALK 0046-4
6”
No. 2
“ BAITER” PRECISION NEEDLE FILE NF-121, 122, 123, 124, 125, AND 126
Hand Tools
Equalling
11
Square
Joint
Flat
Triangular
Round
Knife
Oval
Crochet
Halfround
Crossing
Barrette
Code
Type
Length
Cut
ALK 0047-1
No. 121 Equalling
6”
No. 0
ALK 0047-2
No. 121 Equalling
6”
No. 2
ALK 0047-3
No. 121 Equalling
8”
No. 0
ALK 0047-4
No. 121 Equalling
8”
No. 2
ALK 0047-5
No. 122 Flat
6”
No. 0
ALK 0047-6
No. 122 Flat
6”
No. 2
ALK 0047-7
No. 122 Flat
8”
No. 0
ALK 0047-8
No. 122 Flat
8”
No. 2
ALK 0047-9
No. 123 Half Round
6”
No. 0
ALK 0047-10
No. 123 Half Round
6”
No. 2
ALK 0047-11
No. 123 Half Round
8”
No. 0
ALK 0047-12
No. 123 Half Round
8”
No. 2
ALK 0047-13
No. 126 Round
6”
No. 0
ALK 0047-14
No. 126 Round
6”
No. 2
ALK 0047-15
No. 126 Round
8”
No. 0
ALK 0047-16
No. 126 Round
8”
No. 2
ALK 0047-17
No. 125 Square
6”
No. 0
ALK 0047-18
No. 125 Square
6”
No. 2
ALK 0047-19
No. 125 Square
8”
No. 0
ALK 0047-20
No. 125 Square
8”
No. 2
ALK 0047-21
No. 124 Triangle
6”
No. 0
ALK 0047-22
No. 124 Triangle
6”
No. 2
ALK 0047-23
No. 124 Triangle
8”
No. 0
ALK 0047-24
No. 124 Triangle
8”
No. 2
12-PC Set
NF-148
ALK 0047
Equalling
Flat
Halfround
Square
6-PC Set
NF-158
Triangular
Round
Hand Tools
188
FILES
Baiter Files
ALK 0048
“BAITER’ DIE MAKERS RIFFLERS 6-PC SET
ALK 0049
“BAITER” DIE MAKERS’ RIFFLERS 12-PC SET
Code
Model No.
Riffles No.
Cut
Lgth (mm)
1
12181
12916, 12930, 12942, 12952,
12970, 12981
No. 2
150
2
12186
12711, 12731, 12741, 12750,
12763, 12781
No. 2
180
Code
Model No.
Cut
Lgth (mm)
1
12197
12910, 12911, 12930, 12940,
12952, 12957, 12965, 12970,
12972, 12981, 12984, 12985
Riffles No.
No. 2
150
2
12277
12711, 12713, 12731, 12732,
12741, 12750, 12761, 12763,
12764, 12771, 12781, 12790
No. 2
180
Topman Tools
ALK 0051
Packing : 6 sets/box
Packing : 6 sets/box
5-pc File Set
5-pc Needle File Set
11
Hand Tools
ALK 0050
“Topman” File Set
Code
Model
Length
Cut
1
5-pc File Set
(5380-506)
6”
Bastard
Contents: Flat Mill Saw File, Round Engineer’s File, Half-Round Engineer’s File, Triangle
Slim Taper File & 8” Shoe Rasp 4-way File
2
5-pc Needle File Set
(5390-500)
3”
Second Cut
Contents: Flat, Half-Round, Round, Square & Triangle File
INSPECTION MIRROR
KD Telescoping Mirror - Usa
ALK 0052
2108
ALK 0053
2109
Size
: 2-1/8” x 3-1/2” (rectangular)
Ø
: 2-1/4”
Length
: Closed length 11-1/4”, extends
to 15-1/4”
Length
: Closed length 10”, extends to 14”
Inspects hidden areas. Swivels to almost any position.
Insulated vinyl grip handle.
Inspects hidden areas. Swivels to almost any position.
Insulated vinyl grip handle.
189
Hand Tools
PIPE CUTTERS & BENDERS
Pipe Cutters
ALK 0054
Code
Model No.
Hinged Pipe Cutter
Description
Pipe Capacity Normal Size
In.
mm.
4-6
100-150
1
466-S
For steel Pipe
2
466-HWS
For Heavy-Wall Steel Pipe
4-6
100-150
3
466-CI
For Cast-Iron Pipe
4-6
100-150
150-200
4
468-S
For Steel Pipe
6-8
5
468-HWS
6-8
150-200
Hinged Pipe Cutter
6
468-CI
For Cast-Iron Pipe
6-8
150-200
Designed for rapid cutting of 4” through 12” steel pipe,
heavy-wall steel pipe, and cast-iron pipe. The nine
models can operate where minimal cutter rotation is
necessary due to lack of space.
7
472-S
For Steel Pipe
8-12
200-300
8
472-HWS
8-12
200-300
9
472-CI
For Cast-Iron Pipe
8-12
200-300
Code
Model No.
ALK 0055
Pipe Capacity
Steel
inch-Nom.
Hand Tools
Rotary™ Cutter (6” - 36” or 159 - 915mm)
1
LCRC8S
2
LCRC8I
3
LCRC12S
4
LCRC12I
5
LCRC16S
6
LCRC16I
7
RC20S
8
RC20I
9
RC24S
10
RC24I
11
RC30S*
12
RC30I*
13
RC36S*
Cast Iron
& Ductile
6-8
6-8
10-14
10-12
16-18
14-16
20-22
18-20
24-26
22-24
28-34
30
32-36
Actual
0mm
In.
mm.
159-246
58
1473
159-246
58
1473
266-358
61
1549
266-358
61
1549
368-462
66
1664
368-462
66
1664
476-572
106
2680
476-572
106
2680
584-660
111
2807
584-660
111
2807
698-864
96
2438
698-864
96
2438
813-915
96
2438
11
* Conversion Kits Available
ALK 0056
Designed for use in restricted spaces on small diameter, hard and soft copper, aluminium, brass, and plastic
tubing. Strong lightweight slide and wheel housing, large knurled feed screw knob gives easy control of cutting
pressure for clean cuts.
Code
Model No.
Description
Std. Wheel
1
103
Midget Cutter
E-3469
Capacity
in.
mm.
1/8-5/8
3-16
Midget Tubing Cutter-No.103
ALK 0057
Features an enclosed feed screw to eliminate clogging and jamming, grooved rolls for close-to-flare cuts, and
a fold-away reamer. Made from high-strength aluminium alloy with a spare cutter wheel in the handle. Cuts
copper, brass, and aluminium tubing, and thin-wall conduit. Model 205 has all the features of the No.150, plus
a quick-acting mechanism.
Code
Midget Tubing Cutter-No.150 and 205
Model No.
Description
Std. Wheel
Capacity
in.
mm.
1
150
Enclosed Feed Cutter
E-3469
1/8 -1 1/8
3-28
2
150
Above w/H-D Wheels(s)
E-4546
1/8 - 1 1/8
3-28
3
205
Ratcheting Encl. Feed Cutter
E-3469
1/4 - 2 3/8
6-60
4
205
Above w/H-D Wheel(s)
E-4546
1/4 -1 3/8
6-60
Hand Tools
190
Pipe Cutters
Clean, square cuts are easily made on copper, brass, aluminium, and thin-wall conduit. Nos. 10,15,20 features
a conventional fold-away reamer. No.30 is rated for larger diameter steel and stainless steel tubing.
Code
ALK 0059
ALK 0060
Heavy-Duty Pipe Cutter - Nos. 3-S, 4-S & 6-S
Fast, clean pipe cutting by hand or power. Extra long
shank protects adjustment threads, while an extralarge handle is provided for quick, easy adjustment.
Can be converted to 3-wheel cutter by replacing rollers
with cutter wheel, or can be ordered as 3-wheel model
for use in areas where a complete turn is not possible.
ALK 0061
Std. Wheel
Capacity
in.
mm.
1
10
Screw Feed Cutter
F-158
1/8 - 1
3-25
2
10
Above w/H-D Wheel
E-1240
1/8 - 1
3-25
3
15
Screw Feed Cutter
F-158
3/16 - 1 1/8
5-28
4
15
Above w/H-D Wheel
E-1240
3/16 - 1 1/8
5-28
5
20
Screw Feed Cutter
F-158
5/8 - 2 1/8
16-54
6
20
Above w/H-D Wheel
E-1240
5/8 - 2 1/8
16-54
7
30
Screw Feed Cutter
E-2558
1 - 3 1/8
25-79
8
30
Above w/H-D Wheel
E-2191
1 - 3 1/8
25-79
Clean, square cuts are easily made on copper, brass, aluminium, and thin-wall conduit. Nos. 10,15,20 features
a conventional fold-away reamer. No.30 is rated for larger diameter steel and stainless steel tubing.
Code
Heavy-Duty Pipe Cutter - Nos. 1-A & 2-A
Description
Model No.
Description
In.
mm.
3-32
ALK 0059-1
1-A
Heavy Duty
1/8 - 1 1/4
ALK 0059-2
1-A
1-A 3-Wheel Heavy-Duty
1/8 - 1 1/4
3-32
ALK 0059-3
2-A
Heavy Duty
1/8 - 2
3-50
ALK 0059-4
2-A
2-A 3-Wheel Heavy-Duty
1/8 - 2
3-50
ALK 0060-1
3-S
Heavy Duty
1-3
25-75
ALK 0060-2
3-S
3-S 3-Wheel Heavy-Duty
1-3
25-75
ALK 0060-3
4-S
Heavy Duty
2-4
50-100
ALK 0060-4
4-S
2-4
50-100
ALK 0060-5
6-S
Heavy Duty
4-6
100-150
ALK 0060-6
6-S
4-6
100-150
Code
Model No.
Description
In.
mm.
1
42-A
Heavy-Duty 4-Wheel
3/4 -2
20-50
2
44-S
Heavy-Duty 4-Wheel
2 1/2 -4
60-100
Code
Model No.
4-Wheel Pipe Cutter
Designed for work in areas where a complete turn
is impossible. No.42-A has a short handle for use in
areas where only a 130° turn can be made. Second
handle on No.44-S makes two-man leverage possible
on large pipe sizes. Both equipped with four heavyduty wheels.
ALK 0062
Description
Std. Wheel
Capacity
In.
Quick-Acting Tubing Cutter
Models 151-156 features a quick-action design,
l-beam construction, hardened wear surfaces, and
thrust bearing slide assemblies for smooth operation.
These cutters are available in models for plastic pipe
or metalling tubing. Models 151 and 152 feature foldaway reamers.
Hand Tools
Midget Tubing Cutter-No.10, 15, 20 and 30
Model No.
11
ALK 0058
mm.
1
151
Quick-Acting Cutter
E-3469
1/4 - 1 5/8
6-42
2
151- P
Above w/Wheel for plastic
E-2155
1/8 - 1 1/4
10-40
3
152
Quick-Acting Cutter
E-3469
1/4 - 2 5/8
6-66
4
152-P
E-2155
1/4 - 2
10-63
5
152-P
Above w/Wheel for PVC
F-5272
1/4 -2
10-63
6
153
Quick-Acting Cutter
E-3469
1 1/4-3 1/2
32-90
7
153-P
E-2155
1-3
25-75
48-116
8
154
Quick-Acting Cutter
E-2558
1 7/8 - 4 1/2
9
154-P
E-2156
1 1/2-4
50-110
10
156
Quick-Acting Cutter
E-2558
4-6 5/8
100-170
11
156-P
E-2157
4-6
110-160
191
Hand Tools
Pipe Cutters
No. 458 Flaring Tool
ALK 0063
Code
Model No.
Type
Sizes (In.)
1
458
45° SAE Flares
1/8, 3/16, 1/4, 5/16, 3/8, 3/8, 1/2, 5/8, 3/4
2
458MM
45° SAE Flares
4, 4 3/4, 6, 8, 10, 12,15,16
No. 458R Ratchet Flaring Tool
Code
Model No.
Type
Sizez (In.)
Ib.
kg
Pack
3
458R
45° SAE Flares
1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4
3 1/2
1.6
1
4
454-W
45° SAE - Nominal Water Tube
3/8, 1/2, 3/4, 1
6 1/4
2.8
1
5
455
45° SAE Flares
1/2, 5/8, 3/4, 7/8, 1
6 3/4
3.1
1
6
377
37° SAE Flares
3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4
3 1/2
1.6
1
7
375
37° SAE Flares
1/2, 5/8, 3/4, 7/8, 1
6 3/4
3.1
1
Weight
Std
Cutter Wheels
Code
Mode
No.
30
33075
315
28
29
33055
33065
205
205P
26
136P/156P
27
83235/31667
136/156
25
33050/31657
83185/31662
134P/154P
23
24
33040
33045/31652
133P
134/154
21
22
33035
133
20
36592
153P
19
33030/31647
36597
33025/31642
132/152
132P/152P
Std. Blade
Pk. Exp.
153
18
33020/31637
16
17
33015/31632
131/151
131P/151P
14
83295
109P
15
83290
109
13
83240
108
11
12
33005
32990/31622
106
105/150
9
10
40617
32975/32985
101
41527
50
103/104
32960
40P
7
8
32955
40
6
32945
30P
5
32940
30
4
32930
20
3
32920
15
1
2
32910
11
Code
No.
Tubing Cutter
(Original Product)
10
Hand Tools
Model
No.
Code
ALK 0064
Application
1
E-702
1
.500
2
E-1240
12
.162
Steel • SS
3
E-1740
1
.147
Soft Flexible Plastic
4
E-2155
1
.286
PE, PB, PP, Std. &
Heavy Wall
5
E-2156
1
.412
PE, PB, PP, Std. &
Heavy Wall
6
E-2157
1
.500
PE, PB, PP, Std. &
Heavy Wall
7
E-2191
6
.292
Steel Tubing
8
E-2558
6
.220
Aluminium & Copper
9
E-2880
1
*.747
PE, PB, PP, Std. &
Heavy Wall
10
E-2990
1
.112
Steel, Aluminium &
Copper
11
E-3469
12
.149
Aluminium & Copper
12
E-3495
1
.290
Aluminium
13
E-4546
6
.162
Steel • SS
14
E-5272
6
.290
PVC, ABS, Std. Wall
15
E-5299
6
.412
PVC, ABS, Std. Wall
16
E-158
12
.149
Aluminium Copper
17
E-10279
1
.185
Thin-Wall PVC
18
M-50
12
.250
MufflerTail Pipe
Denotes Cutter Wheels furnished with original product.
Heavy Wall PVC, ABS
√ Denotes alternate Cutter Wheel.
Hand Tools
192
Mode
No.
23
24
58657
83170
472HWS
732
83165
472S
22
74710
472C
42390/34617
83150
468HWS
820/364
83145
468S
20
74700
468C
21
83085
466HWS
19
18
83080
466S
17
16
74685
466C
15
42370
360
14
32900
246
13
11
32865
209
12
32860
208
9
68650
206
10
8
32895
202
7
32880
44S
6
32870
42A
5
32850
6S
4
32840
4S
2
32830
3S
3
32820
2A
1
ALK 0065
Std. Blade
Pk. Exp.
Application
1
E-109
1
.360
Cast Iron
2
E-1032
6
.450
Steel Pipe & Ductile Iron
3
E-1032S
6
.450
S.S. Pipe
4
E-1962
1
.265
Grey Cast Iron
5
E-2632
1
.244
Cast Iron
6
E-3186
1
.680
Steel & Ductile Iron HW
7
F-3
12
.312
Steel & Ductile Iron
8
F-3S
6
.312
S.S. Pipe
9
F-119
1
.132
Grey Cast Iron
10
F-229
12
.411
11
F-229
6
.411
S.S. Pipe
12
F-367
6
.470
13
F-367S
6
.470
S.S. Pipe
14
F-383
1
.265
Grey Cast Iron
15
F-514
12
.312
16
F-515
12
.411
ALK 0066
Hand Tools
Denotes Cutter Wheels furnished with original product.
√ Denotes alternate Cutter Wheel.
Code
Model No.
Type
Sizes (In.)
1
345
45° SAE Flares
3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8
345-DL
45° SAE Flares
Above w/adapters for double lap flares
3/16, 1/4, 5/16, 3/8, 1/2. O.D. Tubing
No. 345 w/No. 150 Tubing Cutter and Case Kit
2
3
345/150
45° SAE Flares
4
345M
45° SAE Flares
6,8,10,12,14,15, and 16
5
345M/150
45° SAE Flares
No. 345M w/No. 150 Tubing cutter Case Kit
Code
Model No.
11
Cutter Wheels
Code
32810
Code
No.
Piping Cutter
(Original Product)
1A
Model
No.
Code
Pipe Cutters
ALK 0067
Water Tube
in.
Hammer-Type Flaring Tool
mm.
1
E-37
3/8
9
2
E-45
1/2
12
3
E-46
5/8
16
4
E-47
3/4
19
5
E-52
1
25
6
E-61
1 1/4
31
7
E-63
1 1/2
37
8
E-64
2
50
Ratchet Bender / Spring Benders
ALK 0068
Geared Ratchet Lever-Type Tube Benders
Code
Model No.
Radius to Center of Tube
Tube O.D.
In.
mm.
In.
mm.
1
358
1
76
5/8”
16
2
368
3 3/4”
95
3/4”
19
3
378
3 3/4”
95
7/8”
22
193
Hand Tools
Ratchet Bender / Spring Benders
Code
ALK 0069
Capacity
Tube Size (Actual O.D.)
Bend Radius
2 1/4”
1
310
5/8”
2
312
3/4”
2 7/8”
3
310M
10mm
42mm
4
312M
12mm
42mm
5
314M
14mm
56mm
6
315M
15mm
56mm
7
316M
16mm
56mm
8
318M
18mm
82mm
9
403
3/16”
5/8”
10
404
1/4”
5/8”
11
405
5/16”
15/16”
12
406
3/8”
15/16”
13
408
1/2”
1 1/2”
14
406M
6mm
16mm
15
408M
8mm
24mm
16
410M
10mm
24mm
17
412M
12mm
38mm
Code
Model No.
Std.
pack
1
506
3/8”
1 1/4”
2
508
1/2”
1 1/2”
RIDGID 300
Series Lever for Bender Soft Copper Tubing
ALK 0070
RIDGID 400
Series for Bender Copper & Steel Tubing
ALK 0071
Model No.
Hand Tools
RIDGID 500
Series Stainless Steel Lever Bender
11
ALK 0072
Spring-Type Tube Bender
For fast, free-form bending of soft copper and
aluminum tube.
Code
Model No.
Description
Lenght
In.
mm.
Tube O.D
Weight
In.
mm.
In.
mm.
1
D-1375
Pack of 6 Spring-Type Benders
10
250
1/4”
6
3/8
0.2
2
D-1376
10
250
5/16”
8
1
0.5
3
D-1377
10
250
3/8”
9
1
0.5
4
D-1378
12
300
7/16”
11
1 5/8
0.8
5
D-1379
12
300
1/2”
12
2 5/8
1.2
6
D-1380
12
300
5/8”
16
3 1/4
1.5
7
D-1381
12
300
3/4”
19
3 3/4
1.7
8
D-1382
12
300
7/8”
22
4 1/8
1.9
1 3/4
0.8
3
1.4
Spring-Type Bender Sets
9
E-5732
Set of 6, 1/4” - 5/8” (6mm - 16mm)
10
E-5734
Set of 8, 1/4” -7/8” (6mm 22mm)
Hand Tools
194
PLIERS
“MTC” Nipper & Plier
“MTC” Min Side Cutting Plier “MTC” Min Diagonal Nipper “MTC” Min Diagonal Nipper “MTC” Min Diagonal Nipper
ALK 0074
ALK 0075
ALK 0076
• With Spring
• Serrated Jaws
• With Cutting Edge
• Bolt Gripping
• With Spring
• For Cutting Copper Wire
• With Spring
• With Spring
• Full Flush Edge Ensures Burr-free
Cutting on Plastic Products.
Item No.
: 002-01-MTC01
Item No.
: 002-01-MTC02
Item No.
: 002-01-MTC03
Item No.
: 002-01-MTC04
Length
: 115mm
Length
: 115mm
Length
: 125mm
Length
: 115mm
Cutting Capacity
Diameter
: Steel Wire 0.8mm
Cutting Capacity
Diameter
: Copper Wire 1.0mm
Cutting Capacity
Diameter
: Copper Wire 1.2mm
Cutting Capacity
Diameter
: Copper Wire 1.0mm
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
118mm
14mm
8mm
50mm
21mm
Packing (pcs/box) : 6
118mm
12mm
8mm
49mm
15mm
129mm
12mm
9mm
50mm
16mm
118mm
14mm
8mm
50mm
15mm
11
“MTC” Mini Precision Nipper “MTC” Mini Needle Nose Plier “MTC” Mini Bent Nose Plier “MTC” Mini Nipper
ALK 0077
ALK 0080
ALK 0078
ALK 0079
•With Spring
•With Narrow & Long Cutting Blade
•For Precision Cutting
•With Spring
•Long Serrated Jaws
•With Cutting Edge
• With Spring
• Serrated Bent Nose
• With Spring
Item No.
: 002-01-MTC05
Item No.
: 002-01-MTC06
Item No.
: 002-01-MTC07
Item No.
: 002-01-MTC08
Length
: 120mm
Length
: 125mm
Length
: 125mm
Length
: 125mm
Cutting Capacity
Diameter
: Copper Wire 1.0mm
Cutting Capacity
Diameter
: Steel Wire 1.0mm
Cutting Capacity
Diameter
: Steel Wire 1.0mm
Cutting Capacity
Diameter
: Copper Wire 0.8mm
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Hand Tools
ALK 0073
125mm
12mm
6mm
50mm
15mm
144mm
13mm
8mm
51mm
44mm
141mm
13mm
8mm
51mm
-
127mm
45mm
12mm
195
Hand Tools
PLIERS
“MTC” NIPPER AND PLIER
“MTC” Slender Long Nose Plier “MTC” Needle Nose Plier
“MTC” Mini Flat Nose Plier
“MTC” Mini End Cutter Nipper
ALK 0084
ALK 0083
ALK 0082
ALK 0081
Hand Tools
• With Spring
• Serrated Jaws
• Bolt Gripping
• One Wire Stripping Hole
• With Spring
• Long Serrated Jaws
• Bolt Gripping
• Two Wire Seperating Holes Can
Separate Parrallel Wires
• With Spring
• Smooth Jaws
• Without Cutting Edge
• With Spring
• For Cutting or
Pulling Nails With
Rolling Motion
Item No.
: 002-01-MTC09
Item No.
: 002-01-MTC10SP
Item No.
: 002-01-MTC11
Item No.
: 002-01-MTC12
Length
: 125mm
Length
: 150mm
Length
: 115mm
Length
: 115mm
Cutting Capacity
Diameter
: Steel Wire 1.0mm
Cutting Capacity
Diameter
: Steel Wire 1.2mm
Cutting Capacity
Diameter
:-
Cutting Capacity
Diameter
: Steel Wire 1.0mm
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
145.0mm
12.5mm
8.0mm
51.0mm
42.0mm
3.0mm
2.0mm
162mm
14mm
8mm
51mm
54mm
-
118mm
11mm
8mm
51mm
23mm
2.5mm
3.5mm
114mm
18mm
14mm
50mm
9mm
-
11
“MTC” Mini Long Nose Plier
ALK 0085
• With Spring
• Serrated Jaws
ALK 0086
ALK 0087
• With Spring
• Smooth Jaws
• With Spring
• Serrated Jaws
ALK 0088
• With Spring
• Serrated Jaws
Item No.
: 002-01-MTC13
Item No.
: 002-01-MTC14
Item No.
: 002-01-MTC15P
Item No.
: 002-01-MTC16
Length
: 125mm
Length
: 125mm
Length
: 115mm
Length
: 100mm
Cutting Capacity
Diameter
: Steel Wire 1.0mm
Cutting Capacity
Diameter
:-
Cutting Capacity
Diameter
: Steel Wire 0.8mm
Cutting Capacity
Diameter
: Steel Wire 0.6mm
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
133mm
13mm
8mm
51mm
36mm
133mm
13mm
8mm
51mm
36mm
124mm
12mm
8mm
51mm
30mm
102mm
10mm
7mm
44mm
23mm
Hand Tools
196
PLIERS
“MTC” Nipper A&Plier
“MTC” Mini Diagonal Nipper “MTC” Mini Long Flat Nose Plier “MTC” Needle Nose Plier
ALK 0089
“MTC” Plastic Nipper
ALK 0091
ALK 0092
• With Spring
• With Spring
• Smooth Jaws
• With Spring
• Smooth Jaws
• With Spring
• Full Flush Edge For Cutting Plastic
Item No.
: 002-01-MTC17
Item No.
: 002-01-MTC18
Item No.
: 002-01-MTC19
Item No.
: 002-01-MTC21
Length
: 100mm
Length
: 125mm
Length
: 125mm
Length
: 125mm
Cutting Capacity
Diameter
: Copper Wire 0.8mm
Cutting Capacity
Diameter
:-
Cutting Capacity
Diameter
:-
Cutting Capacity
Diameter
: Copper Wire 1.8mm
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
102mm
11mm
7mm
44mm
14mm
-
133mm
13mm
8mm
48mm
38mm
2.5mm
3.5mm
132mm
14mm
8mm
48mm
38mm
3mm
2.5mm
132mm
17mm
10mm
49mm
20mm
-
11
“MTC” Plastic Nipper With “MTC” Plastic Nipper
Adjusting Screw
ALK 0093
ALK 0094
“MTC” Plastic Nipper &
Adjusting Screw
ALK 0095
ALK 0096
• With Spring
• With Narrow And Thin Full
Flush Edge For Cutting Plastic
• With Adjusting Screw
• With Spring
• With Narrow And Thin Full
Flush Edge For Cutting Plastic
• With Spring
• With Full Flush Edge
For Cutting Plastic
• With Spring
For Cutting Plastic
• With Adjusting Screw
Item No.
: 002-01-MTC21N
Item No.
: 002-01MTC21S
Item No.
: 002-01-MTC22
Item No.
: 002-01-MTC22N
Length
: 125mm
Length
: 145mm
Length
: 150mm
Length
: 150mm
Cutting Capacity
Diameter
: Copper Wire 1.2mm
Cutting Capacity
Diameter
: Copper Wire 1.6mm
Cutting Capacity
Diameter
: Copper Wire 2.0mm
Cutting Capacity
Diameter
: Copper Wire 1.6mm
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Hand Tools
ALK 0090
133mm
17mm
9mm
49mm
21mm
144.0mm
12.5mm
9.5mm
46.0mm
18.0mm
162mm
19mm
11mm
50mm
22mm
163mm
19mm
10mm
50mm
23mm
197
Hand Tools
PLIERS
“MTC” Nipper And Plier
“MTC” Diagonal Cutting Plier
ALK 0097
ALK 0098
ALK 0099
ALK 0100
Hand Tools
• With Spring
• With Narrow And Long Cutting
Blade For Precision Cutting
• With Spring
For Cutting Plastic
• With Spring
• With One Wire Stripping Hole
• With Spring
Item No.
: 002-01-MTC22S
Item No.
: 002-01-MTC23
Item No.
: 002-01-MTC25B
Item No.
: 002-01-MTC26B
Length
: 165mm
Length
: 175mm
Length
: 125mm
Length
: 150mm
Cutting Capacity
Diameter
: Copper Wire 1.8mm
Cutting Capacity
Diameter
: Copper Wire 1.8mm
Cutting Capacity
Diameter
: Steel Wire 1.6mm
Cutting Capacity
Diameter
: Steel Wire 1.8mm
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
167.0mm
15.5mm
10.0mm
46.0mm
22.5mm
190.0mm
22.0mm
10.5mm
48.0mm
25.5mm
132mm
17mm
10mm
50mm
20mm
161mm
19mm
11mm
51mm
22mm
11
“MTC” Diagonal Cutting Plier
“MTC” Long Nose Plier
ALK 0101
ALK 0102
ALK 0103
ALK 0104
Sure gripping pipe, etc.
Crimping terminals
Two wire
separating holes
One wire
stripping
hole
• With Spring
• Serrated Jaws With Bolt Gripping Design
• Can Use As Wire Stripper, Crimper, Cutter
And Parallel Wire Stripper
• With Spring
• Highly Insulated Handle
• Without Spring
Item No.
: 002-01-MTC26PS
Item No.
: 002-01-MTC27
Item No.
: 002-01-MTC28B
Item No.
: 002-01-MTC29AB
Length
: 150mm
Length
: 175mm
Length
: 125mm
Length
: 150mm
Cutting Capacity
Diameter
: Steel Wire 1.8mm
Cutting Capacity
Diameter
: Steel Wire 1.8mm
Cutting Capacity
Diameter
: Steel Wire 1.0mm
Cutting Capacity
Diameter
: Steel Wire 1.2mm
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
160mm
19mm
11mm
48mm
22mm
-
• With Spring
• Serrated Jaws
With Cutting Edge.
187.0mm
22.0mm
11.5mm
50.0mm
24.0mm
-
138.0mm
16.6mm
10.0mm
48.0mm
43.5mm
4.0mm
3.0mm
161mm
17mm
10mm
52mm
50mm
3.5mm
2.5mm
Hand Tools
198
PLIERS
“MTC” Lineman’s Side Cutting Plier
ALK 0105
ALK 0106
ALK 0108
ALK 0107
• With Spring
• Serrated Jaws With Cutting Edge.
• Without Spring
• Without Spring
• Without Spring
Item No.
: 002-01-MTC29B
Item No.
: 002-01-MTC30
Item No.
: 002-01-MTC31
Item No.
: 002-01-MTC32
Length
: 150mm
Length
: 200mm
Length
: 125mm
Length
: 150mm
Cutting Capacity
Diameter
: Steel Wire 1.2mm
Cutting Capacity
Diameter
: Steel Wire 1.8mm
Cutting Capacity
Diameter
: Steel Wire 1.0mm
Cutting Capacity
Diameter
: Steel Wire 1.6mm
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
161mm
17mm
10mm
52mm
50mm
3.5mm
2.5mm
198.0mm
18.0mm
10.5mm
50.0mm
65.0mm
4.0mm
3.0mm
137mm
16mm
10mm
50mm
-
162.0mm
22.0mm
12.5mm
49.0mm
-
11
“MTC” Lineman’s Side Cutting Plier
“MTC” End Cutting Plier
“MTC” Angle Cutting Plier
ALK 0111
ALK 0109
ALK 0112
ALK 0110
• With Spring
• Without Spring
• Without Spring
• Cutting Or Pulling Nails
With Rolling Motion
• With Spring
• Angle Jaws
• To Separate Twin Vinyl
Coated Wires
Item No.
: 002-01-MTC33
Item No.
: 002-01-MTC34
Item No.
: 002-01-MTC35
Item No.
: 002-01-MTC36B
Length
: 175mm
Length
: 200mm
Length
: 150mm
Length
: 125mm
Cutting Capacity
Diameter
: Steel Wire 1.8mm
Cutting Capacity
Diameter
: Steel Wire 2.0mm
Cutting Capacity
Diameter
: Steel Wire 1.6mm
Cutting Capacity
Diameter
: Copper Wire 1.6mm
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
F
Size
:A
B
C
D
E
187.0mm
24.0mm
13.5mm
51.0mm
-
Hand Tools
“MTC” Long Nose Plier
212.0mm
27.0mm
14.5mm
53.0mm
-
166mm
34mm
12mm
51mm
25mm
9.5mm
132mm
14mm
10mm
50mm
23mm
199
Hand Tools
PLIERS
“MTC” Angle Cutting Plier
“MTC” Slender Side Cutting Plier
ALK 0113
ALK 0114
ALK 0115
ALK 0116
Hand Tools
• With Spring
• Angle Jaws
• To Separate Twin Viny
Coated Wires
• Without Spring
• Serrated Jaws
• Bolt Gripping
• Cutting Edge
• Without Spring
• Serrated Jaws
• Bolt Gripping
• Cutting Edge
• Without Spring
• Serrated Jaws
• Bolt Gripping
• Cutting Edge
Item No.
: 002-01-MTC37B
Item No.
: 002-01-MTC38
Item No.
: 002-01-MTC39
Item No.
: 002-01-MTC40
Length
: 150mm
Length
: 150mm
Length
: 175mm
Length
: 200mm
Cutting Capacity
Diameter
: Copper Wire 2.0mm
Cutting Capacity
Diameter
: Steel Wire 1.6mm
Cutting Capacity
Diameter
: Steel Wire 1.8mm
Cutting Capacity
Diameter
: Steel Wire 2.0mm
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
157mm
15mm
11mm
50mm
25mm
161.0mm
23.0mm
11.5mm
49.0mm
-
178.0mm
25.0mm
12.5mm
51.0mm
-
205mm
28mm
13mm
53mm
-
11
“MTC” Bent Nose Plier
“MTC” Side Cutting Plier
With Insulated Handle
ALK 0118
ALK 0117
ALK 0119
ALK 0120
• Without Spring
• Serrated Bent Nose
• Cutting Edge
• Without Spring
• Serrated Jaws
• Cutting Edge
• Without Spring
• Serrated Jaws
• Cutting Edge
• Without Spring
• Serrated Jaws
• Cutting Edge
Item No.
: 002-01-MTC41
Item No.
: 002-01-MTC42
Item No.
: 002-01-MTC43
Item No.
: 002-01-MTC44
Length
: 150mm
Length
: 150mm
Length
: 175mm
Length
: 200mm
Cutting Capacity
Diameter
: Steel Wire 1.2mm
Cutting Capacity
Diameter
: Steel Wire 1.6mm
Cutting Capacity
Diameter
: Steel Wire 1.8mm
Cutting Capacity
Diameter
: Steel Wire 2.0mm
Size
:A
B
C
D
Size
:A
B
C
D
Size
:A
B
C
D
Size
:A
B
C
D
157mm
17mm
10mm
52mm
165.0mm
22.0mm
12.5mm
52.0mm
190.0mm
24.0mm
13.5mm
54.0mm
215.0mm
27.0mm
14.5mm
58.0mm
Hand Tools
200
PLIERS
“MTC” Cable Cutter With Two-Waved Cutting Edge
ALK 0121
“MTC” Duck Bill Plier
ALK 0122
ALK 0123
ALK 0124
Tip section
• Without Spring
• Without Spring
• Serrated Flat Jaws
• Without Spring
• Without Spring
Item No.
: 002-01-MTC45
Item No.
: 002-01-MTC46
Item No.
: 002-01-MTC47
Item No.
: 002-01-MTC49
Length
: 150mm
Length
: 200mm
Length
: 250mm
Length
: 200mm
Cutting Capacity
Diameter
: Copper / Aluminium
Cable 9.0mmØ
Cutting Capacity
Diameter
Cable 11.0mmØ
Cutting Capacity
Diameter
Cable 13.0mmØ
Size
Size
:A
B
C
D
Size
:A
B
C
D
Size
:A
B
C
D
:A
B
C
D
E
F
G
212.0mm
29.5mm
12.0mm
47.0mm
239.0mm
35.0mm
14.0mm
47.0mm
Hand Tools
162.0mm
25.5mm
11.0mm
47.0mm
210.0mm
17.5mm
11.0mm
52.0mm
41.0mm
3.5mm
6.0mm
“MTC” Multi-Purpose Plier
11
“MTC” Needle Nose Plier
ALK 0125
“MTC” Round Nose Plier
“MTC” Mini Wire Stripper
ALK 0127
ALK 0126
Ajustable Stripping
Sizes: 0.25~2.0mm2
ALK 0128
• Without Spring
• Ideal For Wire Bending,
Coiling, Stripping, Crimping
Terminals And Cutting
• With Spring
• Serrated Jaws
• Bolt Gripping
Item No.
: 002-01-MTC51
Item No.
: 002-01-MTC52
Item No.
: 002-01-MTC57
Item No.
: 002-01-MTC58
Length
: 150mm
Length
: 150mm
Length
: 145mm
Length
: 125mm
Cutting Capacity
Diameter
: Steel Wire 1.2mm
Cutting Capacity
Diameter
: Steel Wire 1.2mm
Size
Cutting Capacity
Diameter
: Stripping
0.25~2mm2
Size
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
:A
B
C
D
E
F
G
Size
:A
B
C
D
E
F
G
164.0mm
17.5mm
10.5mm
52.0mm
-
• With Spring
165mm
16mm
10mm
52mm
53mm
3.5mm
2.5mm
• With Spring
144mm
15mm
8mm
51mm
38mm
-
127mm
14mm
7mm
50mm
-
201
Hand Tools
PLIERS
“MTC” Mini Edge Nipper
With Crimping Die
“MTC” WIRE CUTTER
“MTC” 90° Angle Plastic Nipper
ALK 0132
ALK 0131
ALK 0129
• With Spring
ALK 0130
• With Spring
• Without Spring
• With Spring
Hand Tools
Item No.
: 002-01-MTC59
Item No.
: 002-01-MTC60
Item No.
: 002-01-MTC61
Item No.
: 002-01-MTC62
Length
: 115mm
Length
: 200mm
Length
: 150mm
Length
: 150mm
Cutting Capacity
Diameter
: Copper Wire 1.0mm
Cutting Capacity
Diameter
: Steel Wire 2.0mm
Cutting Capacity
Diameter
: Steel Wire 3.0mm
Cutting Capacity
Diameter
: Copper Wire 2.0mm
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
Size
:A
B
C
D
E
118mm
11mm
8mm
50mm
4mm
210.0mm
27.0mm
14.5mm
50.0mm
-
168mm
21mm
13mm
41mm
5mm
144.0mm
14.5mm
18.0mm
50.0mm
15.0mm
11
“MTC” 45° Angle Plastic
Nipper
ALK 0134
ALK 0133
End Cutting Plier
to DIN 5252, Form A/H/ISO 5748, edges induction
hardened for hard wire.
Material: high grade tool steel C 60,
Code No. 1.0601 chrome plated
• With Spring
Item No.
: 002-01-MTC63
Length
: 150mm
Cutting Capacity
Diameter
: Copper Wire 2.0mm
Size
:A
B
C
D
E
ALK 0135
Slip Joint Plier
Heat Treated Alloy steel, chrome-plated
Code
Size
Capacity
1
6”
Ø 2.0
Size (mm)
2
8”
Ø 3.5
160
3
10”
Ø 3.5
ALK 0136
156.0mm
14.5mm
18.0mm
50.0mm
15.0mm
ALK 0137
Vise Grip Plier Straight Jaw
Code
Water Pump Plier
Code
Size
1
9-1/2”
2
12”
3
16”
Size
1
7”
2
10”
Hand Tools
202
PLIERS
ALK 0138
Long Nose Vise Grip
ALK 0140
Vise Locking Welding Clamp Plier
Code
Size
Code
Size
Size (mm)
1
7”
1
6”
11”
2
10”
2
9”
ALK 0141
ALK 0143
Straight Cutting Snip
Tin Snip
Code
Size
Code
Size
Code
Size
L of Cut
1
8”
1
8”
1
10”
2-1/4”
2
10”
2
10”
2
12-3/4”
3”
3
12”
3
12”
ALK 0144
Avation Snip
ALK 0145
Swedish Pattern Pipe Wrenches
Code
Overall
Max. Jaw
Weight
1
103
1.25mm
Straight
2
101
1.25mm
Left
3
102
1.25mm
Right
Code
Straight Inside Circlip Plier
Overall
Max. Jaw
Weight
Code
For circlips from...to...Ø mm
L (mm)
Length
Opening
(gm/l)
1
3-10
135
1
305mm
38mm
760
2
8-25
140
2
405mm
46mm
1400
3
19-60
170
3
560mm
65mm
2500
4
40-100
220
4
720mm
110mm
5380
5
85-165
320
5
1060mm
160mm
7210
ALK 0147
Straight Outside Circlip Plier
ALK 0146
ALK 0148
ALK 0149
Bent Inside Circlip Plier
Code
L (mm)
Code
L (mm)
1
3-10
135
1
3-10
135
2
8-25
140
2
8-25
140
3
19-60
170
3
19-60
170
4
40-100
220
4
40-100
220
Code
Model No.
Type
Ø
Capacity
5
85-165
320
5
85-165
320
1
12R
Str.
0.038
7-12
2
32R
Str.
0.047
10-18
3
34R
Str.
0.070
19-30
4
56R
Str.
0.090
32-75
5
1245R
45°
0.038
7-12
6
3245R
45°
0.047
10-18
7
3445R
45°
0.070
19-30
L (mm)
8
5645R
45°
0.090
32-75
ALK 0150
Bent Outside Circlip Plier
ALK 0151
Ratchet Snap Ring Plier
Code
L (mm)
Code
1
3-10
135
1
Int.
80-160
16”
9
1290R
90°
0.038
7-12
2
8-25
140
2
Ext.
172-255
19”
10
3290R
90°
0.047
10-18
3
Int.
165-255
29”
11
3490R
90°
0.070
19-30
12
5690R
90°
0.090
32-75
3
19-60
170
4
40-100
220
5
85-165
320
Snap Ring Plier USA
43R: 12pcs of above in platic box
Hand Tools
Tin Snip With Spring
ALK 0142
11
Vise Grip Plier Curved Jaw
ALK 0139
203
Hand Tools
PLIERS
“BIG WEST” CRIMPING PLIER
Multi-purpose function crimping tools. For crimping cable lugs and joints. All pliers come with wire cutter and stripper. Some models come with
thrended bolt cutter.
For Insulated Terminal & Ignition Terminal
For Non-Insulated Terminal & Ignition Terminal
For Insulated Terminal & Ignition Terminal
ALK 0153
ALK 0152
ALK 0154
Standard Packing : 6 pcs/box
Item No.
: 026-01-200
Item No.
: 026-01-200S
Item No.
: 026-01-210
Model No.
: 200
Model No.
: 200S
Model No.
: 210
Function
Capacity
Function
Capacity
Function
Capacity
Crimping
: Insulated 1.25, 2.0, 5.5mm2
Crimping
: Non-Insulated 1.25, 2.0, 3.5 - 5.5mm2
Crimping
: Insulated 1.25, 2.0, 5.5mm2
Stripping
: 0.75, 0.9, 1.25, 2.0, 3.5, 5.5mm
Stripping
: 0.75, 0.9, 1.25, 2.0, 3.5, 5.5mm
Stripping
: 0.75, 0.9, 1.25, 2.0, 3.5, 5.5mm2
Bolt Cutting
: M2.6 x 0.45, M3.0 x 0.5, M3.5 x 0.60,
M4.0 x 0.7, M5.0 x 0.8
2
For Non-Insulated Claw Terminal
(Open Barrel Type) & Ignition Terminal
2
For Insulated and Non Insulated Terminal
ALK 0155
For Insulated Terminal & Non Insulated Claw
Terminal (Open Barrel Type)
ALK 0156
ALK 0157
Hand Tools
11
Item No.
: 026-01-210C
Item No.
: 026-01-220
Item No.
: 026-01-220C
Model No.
: 210C
Model No.
: 220
Model No.
: 220C
Function
Capacity
Function
Capacity
Function
Capacity
Crimping
: Non-Insulated Open Barrel
1.25, 2.0mm2 ISOL
Crimping
: Insulated 1.25, 2.0, 5.5mm2
Non-Insulated 1.25, 2.0, 3.5 - 5.5mm2
Crimping
Stripping
: 0.75, 0.9, 1.25, 2.0, 3.5, 5.5mm2
Stripping
: 0.75, 0.9, 1.25, 2.0, 3.5, 5.5mm2
: Non-Insulated 1.25, 2.0, 3.5 - 5.5mm2
Non-Insulated Open Barrel
1.25, 2.0mm2 ISOL
Bolt Cutting
: M2.6 x 0.45, M3.0 x 0.5, M3.5 x 0.60,
M4.0 x 0.7, M5.0 x 0.8
Bolt Cutting
: M2.6 x 0.45, M3.0 x 0.5, M3.5 x 0.60,
M4.0 x 0.7, M5.0 x 0.8
Stripping
: 0.75, 0.9, 1.25, 2.0, 3.5, 5.5mm2
Bolt Cutting
: M3.5 x 0.6, M4.0 x 0.7, M5.0 x 0.8
For Non Insulated Terminal & Non Insulated
Claw Terminal (Open Barrel Type)
For Non Insulated Terminal & Non Insulated
Claw Terminal (Open Barrel Type)
ALK 0158
ALK 0159
Item No.
: 026-01-300C
Item No.
: 026-01-300N
Model No.
: 300C
Model No.
: 300N
Function
Capacity
Function
Capacity
Crimping
: Non-Insulated 1.25, 2.0, 3.5 - 5.5mm
1.25, 2.0mm2 ISOL
Crimping
: Non-Insulated 1.25, 2.0, 3.5 - 5.5mm2
1.25, 2.0mm2 ISOL
Stripping
: 0.75, 0.9, 1.25, 2.0, 3.5, 5.5mm2
Stripping
: 0.75, 0.9, 1.25, 2.0, 3.5, 5.5mm2
Bolt Cutting
: M2.0 x 0.4, M2.6 x 0.45, M3.0 x 0.5,
M4.0 x 0.7, M5.0 x 0.8
Bolt Cutting
: M2.6 x 0.45, M3.0 x 0.8, M3.5 x 0.60
M4.0 x 0.7, M5.0 x 0.8
2
Hand Tools
PLIERS
204
“Big West” Mini Stripping Plier
“Big West” Mini Crimping Plier
ALK 0161
For Non Insulated Terminal (Open Barrel Type)
ALK 0162
ALK 0160
Item No.
: 026-02-150
Item No.
: 026-03-SP1A
Item No.
: 026-03-SP2A
Model No.
: 150
Model No.
: SP1A
Model No.
: SP2A
Function
Capacity
Function
Capacity
Function
Capacity
Crimping
: Non-Insulated Open Barrel
0.3, 0.5mm2 INS
Stripping
Stripping
Stripping
: 0.3, 0.5, 0.75mm2
: AWG30, 28, 26, 24, 22, 20, 18(Hole
Sizes: 0.4, 0.5, 0.65, 0.8, 0.95, 1.15 &
1.45mmØ)
: AWG24, 22, 20, 18, 16, 14, 12(Hole
Sizes: 0.8, 0.95, 1.15, 1.45, 1.65, 2.0 &
2.6mmØ)
“OPT” Hand Ratchet Crimping Tools For Non-Insulated Terminals
ALK 0164
ALK 0165
Hand Tools
ALK 0163
: 027-01-KH08
Item No.
: 027-01-KH14
Item No.
: 027-01-KH16
Model No.
: KH-8
Model No.
: KH-14
Model No.
: KH-16
Lgth (mm)
: 250
Lgth (mm)
: 270
Lgth (mm)
: 270
Wt (kg)
: 0.6
Wt (kg)
: 0.6
Wt (kg)
: 0.6
Capacity
JIS(mm )
DIN(mm )
A.W.G
Capacity
JIS(mm )
DIN(mm )
A.W.G
Capacity
JIS(mm2)
DIN(mm2)
A.W.G
1.25- 8
1.5-10
16-8
5.5- 14
6-16
10-6
1.25- 14
1.5-16
16-6
2
2
“OPT” Hand Ratchet Crimping
Tools For Insulated Terminals
2
2
11
Item No.
“OPT” Hexagon Crimping Tools
ALK 0166
ALK 0167
ALK 0168
For cable lugs with movable and revolving dies.
For cable lugs with movable and revolving dies.
Item No.
: 027-02-KH11
Item No.
: 027-04-HX150B
Item No.
: 027-04-HX245B
Model No.
: KH-11
Model No.
: HX-150B
Model No.
: HX-245B
Lgth (mm)
: 270
Capacity DIN (mm2)
: 25-150
Capacity DIN (mm2)
: 70-240
Wt (kg)
: 0.8
Lgth (mm)
: 620
Lgth (mm)
: 980
Capacity
JIS(mm )
DIN(mm )
A.W.G
Wt (kg)
: 4.0
Wt (kg)
: 5.6
1.25- 2
1.5-2
16-14
2
2
205
Hand Tools
PLIERS
“OPT” Hand Crimping Tools
ALK 0169
ALK 0170
ALK 0171
For non-insulated terminals with movable and revolving die.
Item No.
: 027-03-CT038
Item No.
: 027-03-CT080
Item No.
: 027-03-CT100
Model No.
: CT-38
Model No.
: CT-80
Model No.
: CT-100
Capacity
: JIS 8, 14, 22, 38 mm
DIN 10, 16, 25, 35 mm2
AWG 8-2
Capacity
: JIS 8, 14, 22, 38, 60, 80 mm
DIN 10, 16, 25, 35, 50-70, 95 mm2
AWG 8-3/0
Capacity
: JIS 22, 38, 60, 80, 100 mm2
DIN 25, 35, 50-70, 95, 120 mm2
AWG 4-4/0
Lgth (mm)
: 556
Lgth (mm)
: 638
Lgth (mm)
: 676
Wt (kg)
: 2.9
Wt (kg)
: 3.9
Wt (kg)
: 4.9
2
2
ALK 0172
ALK 0173
ALK 0174
Hand Tools
11
With non ratchet screw adjustment
With non ratchet screw adjustment
Item No.
: 027-03-CT150
Item No.
: 027-03-KH120
Item No.
: 027-03-KH150
Model No.
: CT-150
Model No.
: KH-120
Model No.
: KH-150
Capacity
: JIS 14-150 mm
DIN 16-150 mm2
MCM 4-300
Capacity
Capacity
Lgth (mm)
: 710
: JIS 8-80 mm
DIN 10-95 mm2
AWG 8-4/0 for aluminum
MCM 8-250 for copper
: JIS 8-100 mm2
DIN 10-120 mm2
AWG 8-4/0 for aluminum
MCM 8-250 for copper
Wt (kg)
: 4.9
Lgth (mm)
: 558
Lgth (mm)
: 595
Wt (kg)
: 2.8
Wt (kg)
: 3.5
2
2
“OPT” Ratchet Crimping Tools For Non-Insulated Terminals
ALK 0175
ALK 0176
ALK 0177
For unisulated receptacles and tab 6.3mm width terminals.
For unisulated receptacles and tab 4.8mm & 2.8mm
width terminals.
For unisulated receptacles and tab 2.8mm width terminals.
Item No.
: 027-05-LY03B
Item No.
: 027-05-LY48B
Item No.
: 027-05-SN28B
Model No.
: LY-03B
Model No.
: LY-48B
Model No.
: SN-28B
Lgth (mm)
: 230
Lgth (mm)
: 230
Lgth (mm)
: 190
Wt (kg)
: 0.6
Wt (kg)
: 0.6
Wt (kg)
: 0.34
Capacity
DIN(mm )
A.W.G
0.5 - 6
20 - 10
2
Capacity
DIN(mm )
A.W.G
0.14 - 2.5
26 - 14
2
Capacity
DIN(mm2)
A.W.G
0.10 - 1.0
28 - 18
Hand Tools
PLIERS
“OPT” Ratchet Crimping Tools For Insulated Terminals
“OPT” Ratchet Crimping Tools
For Turned Contact Plug
ALK 0178
ALK 0179
ALK 0180
For insulated terminals and connectors
For insulated terminals and connectors
For crimping of turned contacts plug
Item No.
: 027-06-LY03C
Item No.
: 027-06-LY04C
Item No.
: 027-09-LY06PT
Model No.
: LY-03C
Model No.
: LY-04C
Model No.
: LY-06PT
Lgth (mm)
: 230
Lgth (mm)
: 235
Lgth (mm)
: 230
Wt (kg)
: 0.6
Wt (kg)
: 0.6
Wt (kg)
: 0.6
Capacity
DIN(mm )
A.W.G
0.5 - 1.5
2.5
4-6
20 - 16
14
12 - 10
2
Capacity
206
DIN(mm )
A.W.G
0.14 - 0.5
0.75 - 1.5
2.00 - 2.5
3.50 - 6.0
26 - 20
18 - 16
14
12 - 10
2
Capacity
DIN(mm2)
A.W.G
1.5 - 6
16 - 10
“OPT” Ratchet Crimping Tools For 90º Flag Terminals
ALK 0183
For non insulated 90º flag terminals.
Item No.
: 027-08-LY01FL
Item No.
: 027-08-LY02FL
Item No.
: 027-08-LY03FL
Model No.
: LY-01FL
Model No.
: LY-02FL
Model No.
: LY-03FL
Lgth (mm)
: 230
Lgth (mm)
: 230
Lgth (mm)
: 230
Wt (kg)
: 0.6
Wt (kg)
: 0.6
Wt (kg)
: 0.6
Capacity
DIN(mm )
A.W.G
0.5 - 1.0
1.5 - 2.5
20 - 18
16 - 14
2
Capacity
DIN(mm )
A.W.G
0.5 - 1.0
1.5 - 2.5
20 - 18
16 - 14
2
Capacity
Hand Tools
ALK 0182
11
ALK 0181
DIN(mm2)
A.W.G
0.5 - 1.0
1.5 - 2.5
20 - 18
16 - 14
“OPT” Ratchet Coaxial Crimping Tools For Rg Type Cable
ALK 0184
ALK 0185
ALK 0186
For crimping RG type cable
For crimping RG type cable
Item No.
: 027-08-LY06FL
Item No.
: 027-07-LY05H
Item No.
: 027-07-SN03H
Model No.
: LY-06FL
Model No.
: LY-05H
Model No.
: SN-03H
Lgth (mm)
: 230
: Across Flat 1.72, 2.6, 5.4, 6.5, 8.1
Wt (kg)
: 0.6
Capacity
For Cable Nut (mm2)
Capacity
For Cable Nut (mm2)
: Across Flat 1.0, 1.72, 3.84,
3.25, 4.5
Lgth (mm)
: 230
Lgth (mm)
: 190
Wt (kg)
: 0.6
Wt (kg)
: 0.34
Capacity
DIN(mm2)
A.W.G
2.5 - 6.0
14 - 10
207
Hand Tools
PLIERS
“OPT” Crimping Tools For Wire Ferrules, End Sleeves
ALK 0187
ALK 0188
ALK 0189
For wire ferrules, end sleeves
Item No.
: 027-11-LY06WF
Item No.
: 027-11-LY16WF
Item No.
: 027-11-LY35WF
Model No.
: LY-06WF
Model No.
: LY-16WF
Model No.
: LY-35WF
Lgth (mm)
: 230
Lgth (mm)
: 230
Lgth (mm)
: 240
Wt (kg)
: 0.6
Wt (kg)
: 0.6
Wt (kg)
: 0.6
Capacity
DIN(mm )
A.W.G
0.5 - 6
20 - 12
2
Capacity
DIN(mm )
A.W.G
6 - 16
10 - 5
2
Capacity
DIN(mm2)
A.W.G
10 - 35
8-2
ALK 0190
Hand Tools
11
Item No.
: 027-11-SN06WF
Model No.
: SN-06WF
Lgth (mm)
: 190
Wt (kg)
: 0.35
Capacity
DIN(mm2)
A.W.G
0.25 - 6
20 - 10
PUNCHES & STENCILS
Punches
ALK 0191
Pin Punch
ALK 0192
Centre Punch
ALK 0193
Centre Punch
Code
Size (mm)
Code
Size (mm)
Code
Size (mm)
Code
Size (mm)
Code
Size (mm)
Code
Size (mm)
Code
Size (mm)
Code
Size (mm)
Code
1
2
4
5
7
8
1
100
2
120
3
150
1
120 X 2
4
120 X 5
6
120 X 8
2
3
5
6
8
9
2
120 X 3
5
120 X 6
7
120 X 10
3
4
6
7
9
10
3
120 X 4
ALK 0194
Flat Cold Chisel
ALK 0195
Pin Punch Set (1)
Chisel and Punch Set (2)
Size (mm)
ALK 0196
Revolving Punch Plier
Code
Size
Code
Size
Code
Size
Size (mm)
1
5” X 1/2”
3
7” X 7/8”
5
10” X 1”
200
2
6” X 3/4”
4
8” X 1”
Hand Tools
PUNCHES & STENCILS
Punches
208
Number & Letter Punches
ALK 0198
ALK 0197
ALK 0199
Dot Design Characters
Wad Punch
Size
Code
Size
Code
Size
1
M2
28
M29
55
M56
2
M3
29
M30
56
M57
3
M4
30
M31
57
M58
4
M5
31
M32
58
M59
5
M6
32
M33
59
M60
6
M7
33
M34
60
M61
7
M8
34
M35
61
M62
Interrupted dot design has a radius on the character
end to make a permanent mark with minimum stress
on marked metal. Meets Atomic Energy Commission
specs. Marked with character designation and size
on thumb size.
8
M9
35
M36
62
M63
Code
Low Stress - dot design
Letter
Code
GERMANY Number & Letter Punch
Code
Number
Code
Number
1
3/32”
9
3/32”
2
1/8”
10
1/8”
Number
3
5/32”
11
5/32”
9
M10
36
M37
63
M64
1
1/8”
6
1/8”
4
3/16”
12
3/16”
10
M11
37
M38
64
M65
2
3/16”
7
3/16”
5
1/4”
13
1/4”
11
M12
38
M39
65
M66
3
1/4”
8
1/4”
6
5/16”
14
5/16”
12
M13
39
M40
66
M67
4
3/8”
9
3/8”
7
3/8”
15
3/8”
13
M14
40
M41
67
M68
5
1/2”
10
1/2”’
8
1/2”
16
1/2”
14
M15
41
M42
68
M69
15
M16
42
M43
69
M70
Code
Number
Code
Number
16
M17
43
M44
70
M71
1
1/8”’
1
1/8”
17
M18
44
M45
71
M72
2
3/16”
2
3/16”
18
M19
45
M46
72
M73
3
1/4”
3
1/4”
19
M20
46
M47
73
M74
4
5/16”
4
5/16”
20
M21
47
M48
74
M75
5
3/8”
5
3/8”
21
M22
48
M49
75
M76
6
1/2”
6
1/2”
22
M23
49
M50
76
M77
23
M24
50
M51
77
M78
24
M25
51
M52
78
M79
25
M26
52
M53
79
M80
26
M27
53
M54
27
M28
54
M55
ALK 0200
USA Letter Punch
11
USA Number Punch
Number & Letter Stencils
ALK 0202
GERMANY Number Zinc Stencil
ALK 0201
Hand Tools
Code
ALK 0203
GERMANY Letter Zinc Stencil
Code
Number
Code
Number
Code
Number
Code
Number
Code
Number
Code
1
3/4”
6
3”
11
8”
1
3/4”
6
3”
11
Number
8”
2
1”
7
3-1/2”
12
10”
2
1”
7
3-1/2”
12
10”
3
1-1/2”
8
4”
13
12”
3
1-1/2”
8
4”
13
12”
4
2”
9
5”
4
2”
9
5”
5
2-1/2”
10
6”
5
2-1/2”
10
6”
209
Hand Tools
SCREWDRIVERS
ALK 0204
ALK 0205
ALK 0206
ALK 0207
ALK 0208
(+) (-)
(-)
Code
Size (mm)
Code
Size (mm)
Code
Size (mm)
1
1.27
6
3.5
11
6
2
1.5
7
4
12
7
3
2
8
4.5
13
8
4
2.5
9
5
14
3
Insulated Screw Driver
Double Cushion Screw
Ball Nose L Allen Key
5
(+)
5.5
10
9
Philip Double
Cushion Screw
Code
Blade
mm
Handle
Code
Blade
mm
Handle
1
75 x 5.5
Ø32 x 80
1
75 x #1
Ø32 x 80
100 x 6
Ø40 x 100
2
100 x #2
Ø40 x 100
150 x 6
Ø40 x 90
3
200 x 6
Ø40 x 90
4
2
10
15
Minus Double
Cushion Screw
3
4
150 x #2 Ø40 x 90
200 x #2 Ø40 x 90
ALK 0209
ALK 0210
Trox Screw Driver
(-)
Nut Driver
Minus
Philip
Code
Blade
Code
Blade
1
75 X 3
1
75 X #0
2
100 X 3
2
100 X #0
3
75 X 4
3
150 X #0
4
100 X 4
4
75 X #1
5
150 X 4
5
100 X #1
6
75 X 5.5
6
150 X #1
7
100 X 6
7
200 X #1
8
150 X 6
8
100 X #2
9
200 X 6
9
150 X #2
10
250 X 6
10
200 X #2
11
300 X 6
11
250 X #2
Code
Size
Code
Size
Code
Size
Code
P502-1
Code
P502-1
12
150 X 8
12
300 X #2
1
T7
4
T10
7
T25
1
4mm
4
7mm
13
250 X 8
13
150 X #3
2
T8
5
T15
8
T27
2
5mm
5
8mm
14
200 X #3
3
T9
6
T20
9
T30
3
6mm
6
10mm
15
250 X #3
16
300 X #3
ALK 0211
ALK 0212
Hand Tools
(-)
Through Type Screw Driver
(+)
Through Type Screw Driver
Minus Through Type Screw Driver
Philip Through Type Screw Driver
Minus Screw Driver Hammer Type
ALK 0213
11
Code
Blade
Code
Blade
Code
Blade
Code
Blade
Code
P4001-1
Code
1
75 x 5.5
4
200 x 8
1
75 x #1
4
200 x #3
1
4”
4
8”
2
100 x 6
5
250 X 8
2
100 x #2
5
300 X #3
2
6”
5
10”
3
150 x 8
6
300 X 8
3
150 x #2
6
150 X #3
Minus Screw Driver
ALK 0215
Minus Screw Driver
P3001-1
Code
P3001-1
Code
P3001-1
Code
P3003-1
Code
1
2”
4
6”
7
12”
1
3”
4
8”
2
3”
5
8”
2
4”
5
10”
3
4”
6
10”
3
6”
6
12”
ALK 0216
Philip Screw Driver Hammer Type
ALK 0214
Code
P4002-1
Code
1
4”
3
P4002-1
8”
2
6”
4
10”
ALK 0219
ALK 0217
Code
Philip Screw Driver
P4001-1
Minus Screw Driver
P3003-1
ALK 0218
Code
P3002-1
Code
P3002-1
Code
P3002-1
Code
P3004-1
Code
P3004-1
1
2”
4
6”
7
12”
1
3”
4
8”
2
3”
5
8”
2
4”
5
10”
3
4”
6
10”
3
6”
6
12”
ALK 0220
ALK 0221
Offset Screw Driver
Code
Size
Length (mm)
1
(-)(+)#1 X 5.0
98
2
(-)(+)#2 X 6.0
105
3
(-)(+)#3 X 8.0
120
ALK 0222
2 Way Screw Driver Bit
Code
Size (mm)
Code
Size (mm)
Code
Size (mm)
1
#1 X 65
4
#2 X 65
7
#2 X 150
2
#2 X 45
5
#2 X 110
8
#3 X 65
Precision Screw Driver
Precision Screw Driver
1500 - Combination Type Plastic box
(132 x 80 x 21mm)
2505 - Flat Type only
Vinyl bag - 150 x 80mm
Code
Model 1500-6pcs
Code
Model 1500-6pcs
Code
Model 1500-6pcs
Code
Model 1500-6pcs
1
(-)1.4 X L 83 X Ø4.5mm
4
(-)2.9 X L 113 X Ø7.0mm
1
(-)0.7 X L 72 X Ø3.2mm
4
(-)1.6 X L 87 X Ø4.0mm
Philip 1 Way Screw Driver
2
(-)2.0 X L 92 X Ø5.0mm
5
(+)#0 X L 102 X Ø6.0mm
2
(-)0.9 X L 77 X Ø3.5mm
5
(-)2.0 X L 92 X Ø4.5mm
Code
Size (mm)
Code
Size (mm)
3
(-)2.4 X L 102 X Ø6.0mm
6
(+)#1 X L 113 X Ø7.0mm
3
(-)1.2 X L 82 X Ø4.0mm
6
(+)#1 X L 113 X Ø7.0mm
1
#1 x 65
2
#2 x 65
ALK 0223
Hand Tools
210
TOOLS & SOCKET
GT TOOL CASES (WITHOUT TOOLS) – Italy
ALK 0225
ALK 0224
TURTLE 300 PEL
TURTLE 350 PEL
ALK 0226
FLY BOX
Width (mm)
: 470
Width (mm)
: 470
Width (mm)
: 430
Depth (mm)
: 390
Depth (mm)
: 390
Depth (mm)
: 400
Height (mm)
: 297
Height (mm)
: 347
Height (mm)
: 220
Weight (kg)
: 8.00
Weight (kg)
: 8.50
Weight (kg)
: 8.00
- Body made entirely of shock-proof HDPE Resin
- Large capacity ideal for air-travelling engineers
- 2 tools pallets with elastic band for tool carry
and 3 component boxes
- 2 tools pallets with elastic band for tool carry
and 3 component boxes
- Comes with 24 small, 10 medium and 4 large drawers
for transporting spare parts or components
- Also comes with vertical tool pallet and large bottom
space for tool transport
GT TOOL CASE (WITHOUT TOOLS) – Italy
ALK 0228
ALK 0229
TURTLE 350 PTS
NEW MEGA WHEELS PEL
USA 140
Width (mm)
: 470
Width (mm)
: 453
Width (mm)
: 472
Depth (mm)
: 390
Depth (mm)
: 345
Depth (mm)
: 352
Height (mm)
: 347
Height (mm)
: 185
Height (mm)
: 148
Weight (kg)
: 8.50
Weight (kg)
: 7.50
Weight (kg)
: 4.40
- 2 tool pallets with pouches for tool carry and 3
component boxes
ALK 0230
NOVA 170 TRE
Width (mm)
: 440
Depth (mm)
: 340
Height (mm)
: 180
Weight (kg)
: 4.50
-Made of shock-proof ABS plastic
-Comes with special vertical tool pallet for hanging
- Body constructed with HIT (High Impact Thermoplastic)
material; shock proof even at extreme temperature
(+100 to -100ºC )
- Large rubber wheels with ball bearing
- Contains 2 tool pallets and 2 component boxes
- Body constructed with HIT (High Impact Thermoplastic)
material; shock proof even at extreme temperature
(+100 to -100ºC )
- Comes with tool pallet and 1 component box
11
Hand Tools
ALK 0227
211
Hand Tools
TOOLS & SOCKET
Wellteam Double Pouch Holder
With Belt – Taiwan
Wellteam Double Pouch
ALK 0231
Wellteam 4-Pocket Tool Pouch
ALK 0232
ALK 0233
A500
A-7037
TP104 (without tools)
Heavy-duty split suede leather; double pouch style, 10 nail/
tool pockets, a leather tape pocket; 2 hammer loop holder
and a combination square holster; adjustable belt fits 29”
to 46” waist; double stitched and rivet-reinforced.
Made of Oxdura Plus, high tenacity fabric, incorporates
high density foam padding for strength and comfort.
Includes 4 nail pockets, 6 small tool pockets, leather
tape and square holders; one leather hammer loop and
one extra swinger hammer loop on the belt; 2-1/4” belt
with quick release buckle set; nylon stitched and rivetreinforced.
Made of heavy-duty, top grain leather with adjustable belt
from (29” to 46”), suitable for maintenance workers and
electricians; it has 1 tool pocket, 3 small pockets, a slot
for long screwdriver, a loop for hammer/flashlight holder,
a snap for wrench and a clip for measuring tape.
Wellteam Single Pouch
Wellteam Professional Tool Bag –
Taiwan
ALK 0234
Wellteam Electrical & Drill Pouch –
Taiwan
ALK 0235
ALK 0236
A530
B500R
TP-09
Heavy-duty split suede leather; 2-pocket design;
adjustable 1-1/4” width belt with quick release buckle
fits 29” to 46” waist; rivet-reinforced.
Heavy-duty split suede leather; 5-pocket design plus 1
leather hammer loop on the left side; wide tunnel belt loop;
double stitching and rivet- reinforced.
Heavy-duty, top grain leather; includes 1 main tool pocket,
1 small tool pocket and 1 drill holster; plus tapered
screwdriver holder, hammer/flashlight holder, “T” chain
type holder, metal tape rule holder and rivet-reinforced
throughout.
Hand Tools
Wellteam 5-Pocket Work Tool Pouch
– Taiwan
Wellteam 4-Pocket Work Tool Pouch
– Taiwan
ALK 0237
Wellteam Tool Holder – Taiwan
ALK 0238
ALK 0239
11
TP03A (w/o tools)
TP04A
DH4A
Made of heavy-duty, top grain leather; 1 large pocket
partitioned into 2 compartments, 3 front pockets and a
holder for hammer/flashlight.
Made of heavy-duty top grain leather, 1 box-shaped
main pocket, 2 front pockets and 2 tapered screwdriver
holders.
Made of heavy duty top grain leather, with 1 main pocket
and 2 small pockets. Heavy riveting against wear and
tear.
Wellteam Tool/Battery Holder –
Taiwan
Wellteam Web Work Belt – Taiwan
ALK 0240
Wellteam Deluxe Tuff’n Lite Belt –
Taiwan
ALK 0241
ALK 0242
BP-1 (w/o tools)
LB-7085
LB-7090
Made of heavy-duty top grain leather; 2-1/2” belt slots.
Heavy riveting against wear and tear.
high density foam padding for strength and comfort;
2-1/4” web belt with quick release polyvinyl buckle set;
fits sizes 29” to 46” waist; riveted for strength.
high density foam padding for strength and comfort; foam
padding inside at middle area belt to release pressure and
provide added comfort. Heavy-duty web belt with quick
release buckle set at ends; fits 29” to 46” waist.
Wellteam Leather Work Belt – Taiwan
ALK 0243
LB-2
Heavy-duty, top grain leather; nickel plated roller buckle
and leather strap keeper; fits waist size 29” to 46”.
Hand Tools
212
TOOLS & SOCKET
KTC 1/4” Dr And 1/2” Dr Combination Tool Set – Japan
ALK 0244
Code
Description
ALK 0244
MK81AT Tools only (76pcs) & MK81-M Case only
Contents
MK81A (Tools & Case)
Wall-hanging type, for automotive use. The wall-hanging
steel case is made of heavy gauge steel, enamel paint
finish, with sliding shutter. Tools are clearly outlined on
the background so missing parts are easily noticeable. It
is lockable by padlock.
1/4” Dr 6pt Socket B2-05, 055, 07, 08, 10, 12. 1/4” Dr 5” Ratchet Handle BR2E.
1/2” Dr Socket (6pt) B4-10, 12, (12pt) B4-13W, 14W, 17W, 19W, 21W, 22W, 24W, 27W, 30W, 32W. 1/2” Dr Hex Wr HB30-5,
6, 8, 10, 12.
1/2” Dr 10” Ratchet Handle BR4E. ½” Dr Ext Bar BE4-150. 1/2” Dr Unit Joint BJ4.
45° x 6° Long Offset Wr M5-1012, 1113, 1214, 1417, 1921, 2224.
Open End Wr S2-05507, 0810, 1012, 1113, 1214, 1417, 1921, 2224.
Comb Wr MS2-10, 12, 14, 17, 19, 21. Plastic Grip Screwdriver D1m2-5, 6, 8, D1P2-1, 2, 3.
Heavy Duty Screwdriver FD-250. Adjustable Wr MW-200, 250, 300. Pipe Wr PW-250, 300, 350.
Mini Clipper BPZ2-215C. Combination Plier PJ-150, 200. Side Cutting Plier SPD-175C, 200C.
Needel Nose Plier PSL-150. Diagonal Cutting Plier PN1-150. Waterpump Plier WP-250C.
1lb Combination Hammer UD7-10. 6pt Wr HL4 (2, 2.5, 3, 4).
Int & Ext Snap Ring Plier SCP-171, SOP-171. Spare Tips For Snap Ring Plier SPC5.
Metal Case: L1125 x W145 x H630mm. Weight: Case 18kg; Tools : 14kg.
KTC 3/8” Dr And ½” Dr Combination Tool Set – Japan
ALK 0245
Code
Description
ALK 0245
MK91AT Tools only (79pcs) & MK91A-M Case only
MK91A (Tools & Case)
11
Wall-hanging type, for automotive use. The wall-hanging
steel case is made of heavy gauge steel, enamel paint
finish, with sliding shutter. Tools are clearly outlined on
the background so missing parts are easily noticeable. It
is lockable by padlock.
3/8” Dr Socket (6pt) B3-055, 07, 08, 10, 12, (12pt) B3-13W. 3/8” Dr 7” Ratchet Handle BR3E.
3/8”Dr 12” Spinner Handle BS3E. 3/8” Dr Ext Bar BE3-075, 150, 270. 3/8” Dr Uni Joint BJ3.
3/8” Dr Spark Plug Wr B25P-16H, 20.8H.
1/2” Dr 12pt Socket B4-14W, 17W, 19W, 21W, 22W, 24W, 27W.
1/2” Dr 10” Ratchet Handle BR4E. 1/2” Dr 16” Spinner Handle BS4E.
1/2” Dr Ext Bar BE4-075, 150. 1/2”Fx3/8”M, 3/8”Fx1/2”M Adaptor BA43,34.
45°x6° Long Offset Wr M5-1012, 1214, 1417, 1719, 1921, 2224.
45° Short Box End Wr M20-7x8, 10x12, 14x17.
Open End Wr S2-05507, 0810, 1012, 1113, 1214, 1417, 1719, 1921, 2224.
Combination Wr MS2-055, 07, 08, 10, 12, 13, 14, 17, 19.
Plastic Grip Screwdriver D1M2-5, 6, 8, D1P2-1, 2, 3. Heavy Duty Screwdriver FD-250.
Plastic Grip Stubby Screwdriver D1MS-6, D1PS-2. Baby Screwdriver BAD-50.
Adjustable Wr MW-200, 300. Combination Plier PJ-200. Needle Nose Plier PSL-150.
Diagonal Cutting Plier PN-1-150. Waterpump Plier WP-250C.
Side Cutting Plier SPD-200C. 1Ib Combination hammer UD7-10.
Int & Ext Snap Ring Plier SCP-171, SOP-171. Spare Tips For Snap Ring Plier SPC5.
T-Shape Wr TH-10, 12. Oil Filter Cartridge Wr FF-8095. Cross Rim Wr XH-14-21.
Metal Case : L1125 x W145 x H630mm. Weight : Case 18kg; Tools : 13.5kg.
Hand Tools
Contents
Tone Display Board W/Shutter – Japan
ALK 0246
Code
Description
ALK 0246
C25B (w/o tools and outline on the background)
Contents
Wall hanging type, made of heavy gauge steel, enamel paint finish, comes with a part box, hooks, socket bars,
key, manual.
C25B (w/o tools and outline on the background)
KTC Mechanic Tool Set – Japan
ALK 0247
Code
Description
Weight (kg)
ALK 0247
SK031S (31pcs)
8.0
Contents
45˚x6º Long Offset Wrench M5-1012, 1113, 1214, 1417, 1921, 2224.
Open End Wrench S2-0810, 1012, 1113, 1214, 1417, 1719.
Adjustable Wrench MW-200, 300. Combination Plier PJ-200. Digonal Cutting Plier PN1-150.
Heavy Duty Water Pump Plier WPD1-250. Needle Nose Plier PSL-150.
Plastic Grip Screwdrivers D1m2-5, 6, 8, D1PS-2. Baby Screwdrivers BAD-0, 75.
Combination Hammer UD7-10. Half Round File FIS-100HM. Open End Wrench Holder EHS-1.
Metal Case EK-3 : L410 x W210 x H150mm. Weight : 9.5kg. Packing : 1 Set/Box
KTC Item SK0310S
The metal case is made of heavy gauge steel with enamel
paint finish.
213
Hand Tools
TOOLS & SOCKET
Tone Mechanic Tool Set – Japan
ALK 0248
Code
Description
Weight (kg)
ALK 0248-1
700DX Tools & Case (74pcs)
17.1
ALK 0248-2
2211 Case Only
7.1
Contents
3/8” Dr Sockets (6pt)- 8, 10, 11, 12, 13, 14mm. Deep Sockets (6pt)- 8, 10, 12mm.
Plug Sockets 20.8. Ratchet Handle. Ext Bar 3”, 6”.
1/2” Dr Sockets (12pt)- 17, 19, 21, 22, 24mm. Ratchet Handle. Nut Spinner Handle.
Ext Bar 3”, 6”, 10”. Adaptor 1/2M x 3/8F. Uni Joint BJ40.
Open End Wrench- 6x7, 8x9, 10x12, 11x13, 12x14, 14x17mm.
Offset Wrench- 10x12, 11x13, 12x14, 14x17, 19x21, 22x24mm.
Offset Short Wrench- 8x9, 10x12, 12x14mm. Offset Long Wrench- 10x12, 14x17mm.
Flare Nut Wrench 10x12mm. Adjustable Wrench 12”. Combination Plier 8”
Water Pump Plier 10”. Pipe Wrench 12”. Long Nose Cutting Plier 6”.
Screwdrivers (-)3”, 4”, 6”, (+)#1, #2, #3. Stubby Screwdrivers (-), (+).
Long Screwdrivers (-), (+). Heavy Duty Screwdriver (-)6”. Box Driver, Deep Type 10mm.
Flate File 220mm. Round File 130mm. 8pcs Hex Key 2, 2.5, 3, 4, 5, 6, 8, 10mm.
Hammer 1 lb. Oil Stone 100mm. Flat Cold Chisel 19x165mm. Center Punch 125mm.
Metal Case : L430 x W210 x H250. Packing : 1 Set/Box.
TONE 700DX
The metal case is made of heavy gauge steel with enamel
paint finish and automatic locking system with keys.
Hand Tools
11
Tone 1/2” Dr Combination Tool Set – Japan
ALK 0249
Code
Description
ALK 0249
K20 (32pcs)
Contents
Sockets (12pt): 8, 10, 11, 12, 13, 14, 17, 19, 21, 22, 24, 26, 27, 30, 32mm.
Ratchet Handle 371. Flex Handle 311. T Handle 310. 6” Ext Bar 321. Bar 110.
Open End Wrenches: 5.5x7, 8x10, 11x13, 12x14, 17x19, 22x24mm.
45° Ring Spanners: 8x10, 11x13, 12x14, 14x17, 19x22, 24x27mm.
Metal Case: 475 x 280 x 65mm. Weight: 8.2kg. Packing 2 Sets/Box.
K-20 (Metal Case)
ALK 0250
Code
Description
ALK 0250
K30 (33pcs)
Contents
Sockets (12pt): 10, 12, 13, 14, 15, 17, 19, 21, 22, 24mm.
20.8 Plug Socket. Ratchet Handle 371. 6” Ext Bar 321.
Long Open End Wrenches: 6x7, 8x9, 10x12, 11x13, 12x14, 14x17mm.
45° Ring Spanners: 10x12, 14x17, 22x24mm. 10” Adjustable Wrench MW-250.
8” Combination Plier CP-200. 7” Cutting Plier CT-175. Screwdrivers: (-)75, 100, (+)#1, #2.
190mm Scissor. 2m Tape. 1/2 lb Hammer. 10m Adhesive Tape.
Plastic Case: 370 x 300 x 80mm. Weight: 5.2kg. Packing: 2 Sets/Box.
K-30 (Plastic Case)
Hand Tools
214
TOOLS & SOCKET
Tone Combination Tool Set – Japan
ALK 0251
Code
Description
ALK 0251
K50 (21pcs)
Contents
8” Adjustable Wrench MW-200. 6” Combination Plier CP-150. 10” Water Pump Plier KWP-250.
6” Cutting Plier CT-150. 5” Needle Nose Plier RP-125. 5” Diagonal Cutting Plier NN-125.
190mm Scissor. 5-pcs Screwdriver Set (#2)(-), (#1)(-), 5.5mm Handle.
Current Check Screwdriver. 1/2 lb Claw Hammer BH-05B. 2m Rule. 220mm File.
10m Adhesive Tape. Pocket Knife. Screws. 100V.60W Soldering Iron. Solder. Paste.
Metal Case: 385 x 230 x 105mm. Weight: 4.2kg. Packing: 2 Sets/Box.
K-50 (Metal Case)
ALK 0252
Code
Description
ALK 0252
K60 (39pcs)
Contents
Sockets (12pt): 8, 10, 12, 13, 14mm. Sockets (6pt): 15, 17,19,21, 22, 24mm.
Deep Sockets (6pt): 8, 10, 12, 14mm. Ratchet Handle 271. T-Handle 220. 6” Ext Bar 306.
Ball Joint BJ30. Combination Wrenches: 10, 12, 13, 14, 17, 19mm.
8” Adjustable Wrench MW-200. 8” Combination Plier CP-200. 6” Needle Nose Plier RP-150.
Screwdriver (-)75, 100, (+)#1, #2. 1/2 lb Ball Pein Hammer BH-05.
16x18x20.8(L:90mm) Plug Wrench. 9pcs Plug Cleaner. Long Hex L-Wrenches: 5, 6, 8, 10mm.
Plastic Case: 370 x 300 x 80mm. Weight: 5kg. Packing: 2 Sets/Box.
ALK 0253
Code
Description
ALK 0253
K70 (31pcs)
Contents
Sockets (12pt): 10, 12, 13, 14, 15, 17, 19, 21, 22, 24mm. Plug Sockets: 16, 20.8mm.
Ratchet Handle RH41. 3” Wobble Ext. Bar EX41-075. Open End Spanner: S-08x10, 12x14, 13x17mm.
Short Offset Wrench M46-10x12mm. Long Offset Wrenches: M15-14x17, 19x21mm.
8” Adjustable Wrench MW-200. 8” Combination Plier CP-200. 6” Needle Nose Plier RP-150.
5” Diagonal Cutting Plier NN-125. Screwdriver: PMD-100 (6x100mm), PPD-001 (#1x75mm),
PPD-002 (#2x100mm), PSD-P2 (#2x25mm). 1/2 lb Ball Pein Hammer BH-05.
Tire Pressure Gauge. Auto Voltage Tester 6V~24V.
Plastic Case: 370 x 300 x 80mm. Weight: 4.8kg. Packing: 2 Sets/Box.
Tire Pressure Gauge
Capacity : 80kPa - 340kPa
(0.8 - 3.4 kg/cm2)
Least graduation : 20kPa
(0.2kg/cm2)
K70 (Plastic Case)
These 5 kits are suitable for servicemen. Metal case is made of heavy gauge steel with enamel paint finish. Plastic cases
are made of polyethylene material that is rust-proof , dent-proof, scratch-proof and extreme temperature-resistant. It is
also resistant to chemical spills such as gasoline, oil, battery acid or brake fluid.
11
Hand Tools
K-60 (Plastic Case)
215
Hand Tools
TOOLS & SOCKET
Tone Combination Tool Set – Japan
ALK 0254-1
Code
Description
Weight (kg)
ALK 0254-1
700AX Tools & Case
9.8
ALK 0254-2
700SX Tools & Case
11.1
ALK 0254--3
700S Tools & Case
10.5
Contents
700AX – 38pcs
700AX
ALK 0254-2
1/2” Dr Socket : (6pt) 10, 12, 13, 14mm; (12pt) 17, 19, 21, 22, 24mm.
Spark Plug Socket w/magnet 4P-16, 20.6. Ratchet Handle 371.
Extension Bar 321(150mm). Universal Joint BJ40.
Open End Spanner: 5.5x7, 8x10, 10x12, 11x13, 12x14, 14x17mm.
45° Long Offset Wrench: 10x12, 14x17, 19x21, 22x24mm.
Adjustable Wrench MW250. Combination Plier CP-200.
Long Nose Plier RP-150. Diagonal Cutting Plier KN-150.
Plastic Handle Screwdrivers: (-)100mm, (+)#1x75, #2x100, #3x150mm.
Stubby Screwdrivers: (-), (+)#2. Heavy Duty Screwdriver (-)6”.
Ball Pein Hammer 1 lb(BHC-10). Brake Adj Tool BST-110. Scraper Knife 25x160mm.
Metal Case 2215 : 410 x 220 x 195mm. Weight : 4.6kg.
700SX – 45pcs
1/2” Dr Sockets: (6pt) 10, 12, 13, 14mm; (12pt) 17, 19, 21, 22, 24, 26, 27mm.
Ratchet Handle 371. Extension Bar 321(150mm).
Open End Wrench: 5.5x7, 8x10, 11x13, 12x14, 17x19, 22x24mm.
45° Long Offset Wrench: 10x12, 12x14, 13x17, 19x21, 22x24mm.
Adjustable Wrench MW-300. Combination Plier CP-200.
Diagonal Cutting Plier KN-150. Water Pump Plier KWP-250.
Side Cutting Plier CT-175. Ball Pein Hammer 1 lb(BHC-10).
Plastic Handle Screwdrivers: (-)75, 100, 150mm, (+)#1x75, #2x100, #3x150mm.
Hex Key Wrench 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm (9pcs).
Metal Case 2205: 410 x 220 x 195mm. Weight : 4.6kg.
700SX
ALK 0254--3
700S – 45pcs
Hand Tools
1/2” Dr Sockets: (6pt) 10, 12, 13, 14mm; (12pt) 17, 19, 21, 22, 24,26, 27mm.
Ratchet Handle 371. Extension Bar 321 (150mm).
Open End Spanner: 5.5x7, 8x10, 11x13, 12x14, 17x19, 22x24mm.
45° Long Offset Wrench: 10x12, 12x14, 13x17, 19x21, 22x24mm.
Adjustable Wrench MW-300. Combination Plier CP-200.
Water Pump Plier KWP-250. Diagonal Cutting Plier KN-150
Side Cutting Plier CT-175. Ball Pein Hammer 1 lb(BHC-10).
Plastic Handle Screwdrivers: (-)75, 100, 150, (+)#1x75, #2x100, #3x150mm.
Hex Key Wrench 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm (9pcs).
Metal Case 2205: 410 x 220 x 170mm. Weight : 4.0kg.
11
TONE 700S
Metal case is made of heavy gauge steel with enamel
paint finish.
Knipex 1/2” Dr Insulated Tool Set – Germany
ALK 0255
Code
Description
ALK 0255
989911 (17pcs)
Contents
Combination Plier 200mm. Diagonal Cutter 160mm.
Screwdriver (-)3.5x105, 4.0x105, 5.5x130, (+)#0x65.
Ratchet Handle 265mm.
Extension Bar 125, 250mm.
Sockets (6pt) 10, 11, 12, 13, 14, 17, 19mm.
Cable Knife 180mm.
989911
ALK 0256
Code
Description
ALK 0256
989912 (26pcs)
Contents
Combination Plier 200mm. Diagonal Cutter 160mm.
Open End Wrench 10, 11, 12, 13, 14, 17, 19mm.
Screwdriver (-)2.8x80, 3.5x105, 4.0x105, 5.5x130, (+)#0x65, #1x65, #2x105.
T-Handle 200mm.
Sockets (6pt) 10, 11, 12, 13, 14, 17, 19mm.
Cable Knife 180mm.
Dismantling Knife 155mm.
989912
Hand Tools
216
TOOLS & SOCKET
m10(R) 1/4” Dr Socket Set – Taiwan
Hexagon
m10(R)
ALK 0257
Description
Code
ALK 0257
Metal Case: 243 x 124 x 39mm, 1.35kg; 10 Sets/Box Item 235MX – 35pcs
6pt Skt: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 13.
Made of chrome-vanadium steel, chrome-plated.
Hex Skt: 3, 4, 5, 6, 8, 10mm.
Mirror Finish.
Philip Skt: #1, #2, #3, #4.
Flat Skt (-)4, 5.5, 7.
Ext Bar 50mm, 100mm.
Spring Ext Bar 150mm.
Universal Joint.
Ratchet Handle.
L-Wrench: 1.5, 2, 2.5mm.
Spin Disc.
Driver Handle.
Sliding T-Handle.
235MX
Tone 1/4” Dr Socket Set – Japan
TONE
ALK 0258-1
1850M ALK 0258-1
ALK 0258-1
Metal Case: 200 x 110 x 31mm, 0.75kg; 10 Sets/Box Item 1850M – 12pcs
6pt Skt: 5, 5.5, 6, 7, 8, 10, 12, 13mm.
Ratchet Handle.
Flex Handle.
Driver Handle.
Cross Bar.
ALK 0258-2
Metal Case: 200 x 110 x 31mm, 0.75kg; 10 Sets/Box Item 1850 – 12pcs
6pt Skt: 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”,
3/8”, 7/16”.
Ratchet Handle.
Flex Handle.
Driver Handle.
Cross Bar.
ALK 0258-3
Metal Case: 317 x 164 x 43mm, 1.6kg; 5 Sets/Box
1850 ALK 0258-2
TONE
Item MX200 – 26pcs
Made of chrom vanadium steel, chrome-plated, JIS 6pt Skt: 5, 5.5, 6, 7, 8, 10, 11, 12, 13, 14mm.
standard, for manual drive & metal cases are made 6pt Deep Skt: 7, 8, 10, 12, 13mm.
Hex Skt: 3, 4, 5, 6, 8mm.
of heavy gauge steel with enamel paint finish.
Ratchet Handle.
Sliding T-Handle.
Driver Handle.
Ext Bar 50, 150mm.
Universal Joint.
11
Hexagon
Description
Code
Hand Tools
Hexagon
MX200 ALK 0258-3
Hexagon
KTC
Description
Code
ALK 0259-1
Plastic Tray: 264 x 82 x 30mm, 0.4kg; 1 Set/Box
Item TB210 – 13pcs
Made of chrome vanadium steel, chrome-plated, 6pt Skt: 5, 5.5, 6, 7, 8, 10, 11, 12, 13, 14mm.
JIS standard, for manual drive and metal cases Ratchet Handle.
are made of heavy gauge steel with enamel paint Ext Bar 50, 100mm.
finish.
ALK 0259-2
TB210 ALK 0259-1
TB210B ALK 0259-2
Plastic Tray: 264 x 82 x 30mm, 0.4kg; 1 Set/Box
Item TB210B – 13pcs
Made of chrome vanadium steel, chrome-plated,
JIS standard, for manual drive and metal cases
are made of heavy gauge steel with enamel paint
finish.
6pt Skt: 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”,
3/8”, 7/16”, 1/2”, 9/16”.
Ratchet Handle.
Ext Bar 50, 100mm.
217
Hand Tools
TOOLS & SOCKET
Hexagon
m10(R)
ALK 0260
Description
Code
ALK 0260
Metal Case: 377 x 75 x 39mm, 2kg; 10 Sets/Box
Item 313M – 17pcs
Made of chrome-vanadium steel, chrome-plated. 6pt Skt: 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19, 21,
22mm.
Mirror Finish.
Ratchet Handle.
Ext Bar 75, 150mm.
Universal Joint.
313M
TONE 3/8” Dr Socket Set – Japan
Hexagon
TONE
Description
Code
ALK 0261-1
Item 1560MS – 17pcs
6pt Skt: 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19, 21,
22mm.
Ratchet Handle
Extension Bar 75, 150mm.
Universal Ball Joint.
ALK 0261-2
Item 1500 – 21pcs
6pt Skt: 1/4”, 5/16”, 3/8”
12pt- 7/16”, 1/2”, 17/32”, 9/16”, 19/32”, 5/8”,
11/16”, 3/4”, 13/16”, 7/8”.
Ratchet Handle.
Flex Handle.
Sliding T-Handle.
Speeder Handle.
Ext Bar 75,150, 300mm.
Universal Joint.
1560MS ALK 0261-1
TONE
Bihexagon
ALK 0261-3
Hand Tools
6pt Skt: 7, 8, 10, 12, 13, 14mm.
12pt Skt: 17, 19, 21, 22mm.
6pt Deep Skt: 10, 12mm
12pt Deep Skt: 13, 14, 17mm.
Imp Hex Skt: 3, 4, 5, 6, 8, 10, 12mm.
Ratchet Handle
Sliding T-Handle
Ext Bar 75,150mm.
Universal Ball Joint.
Hexagon
1500 ALK 0261-2
TONE
11
Made of chrome vanadium steel, chrome-plated, JIS standard, for manual drive & metal cases are made of heavy guage
steel with enamel paint finish.
Bihexagon
Hexagon
MX300 ALK 0261-3
KTC 3/8” Dr Socket Set – Japan
KTC
ALK 0262-1
Description
Code
ALK 0262-1
Metal Case: 265 x 80 x 40mm, 1.7kg; 1 Set/Box
Bihexagon
Item B211 – 15pcs
6pt Skt: 5.5, 7, 8, 10, 11, 12mm.
12pt Skt: 13, 14, 17, 19, 22mm.
Ratchet Handle
Ext Bar 75,150mm.
Universal Joint.
Hexagon
ALK 0262-2
6pt Skt: 7, 8, 10, 12, 13, 14, 17, 19mm.
Ratchet Handle
Ext Bar 50,100mm.
Universal Joint.
5pcs Skt Holder.
B211
KTC
ALK 0262-3
Item TB308BX – 12pcs
6pt Skt: 3/8”, 7/16”.
12pt Skt: 1/2”, 9/16”, 19/32”, 5/8”, 11/16”, 3/4”.
Ratchet Handle
Ext Bar 50, 100mm.
Universal Joint.
5pcs Skt Holder.
Bihexagon
Hexagon
Made of chrome vanadium steel, chrome-plated, JIS standard, for manual drive & metal cases are made of heavy guage
steel with enamel paint finish.
TB308
ALK 0262-2
TB308BX
ALK 0262--3
Hand Tools
218
TOOLS & SOCKET
m10(R)
Code
ALK 0263-1
Description
Bihexagon
Item 419M – 24pcs
6pt Skt: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,
21, 22, 23, 24, 27, 30, 32mm.
Ratchet Handle.
Ext Bar 75, 100mm.
Sliding T-Handle.
Universal Joint.
Hexagon
ALK 0263-2
419M ALK 0263-1
419W ALK 0263-3
Item 419MB – 24pcs
12pt Skt: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,
21, 22, 23, 24, 27, 30, 32mm.
Ratchet Handle.
Ext Bar 75, 250mm.
Sliding T-Handle.
Universal Joint.
419MB ALK 0263-2
ALK 0263-3
Mirror Finish
Metal Case:450 x 200 x 50mm, 5.5kg; 5 Sets/Box
Item 419W – 24pcs
12pt Skt: 3/8”, 7/16”, 1/2”, 15/32”, 9/16”, 19/32”,
5/8”, 21/32”, 11/16”, 3/4”, 25/32”, 13/16”, 7/8”,
15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/14”.
Ratchet Handle
Ext Bar 75,150mm.
Sliding T-Handle.
Universal Joint.
KTC 1/2” Dr Socket Set – Japan
KTC
ALK 0264-1
Description
Code
ALK 0264-1
Bihexagon
Plastic Box: Model TCP1-1, 385 x 190 x 65mm,
6.1kg; 1 Set/Box
Item B3022P – 28pcs
B3013R
KTC
ALK 0264-2
Bihexagon
ALK 0264-3
6pt Skt: 8, 9, 10, 11, 12mm.
6pt Skt: 9/16”, 19/32”, 5/8”, 11/16”.
12pt Skt: 13, 14, 17, 19, 21, 22, 23, 24, 26, 27, 29,
30, 32mm.
Ratchet Handle.
Flexible Handle.
Ext Bar 75, 150, 250mm.
Universal Joint.
6pt Skt: 8, 10, 12, 13, 14, 17, 19, 21, 22, 24mm.
Ratchet Handle
Ext Bar 75, 150mm.
Universal Joint.
5pc Socket Holder.
Hexagon
ALK 0264-4
6pt Skt: 8, 10, 11, 12mm.
12pt Skt: 13, 14, 17, 19, 21, 22, 24, 26, 27, 30,
32mm.
Ratchet Handle.
Flexible Handle.
Ext Bar 75, 150mm.
Wobble Ext Bar 100mm.
Universal Joint.
5pcs Socket Holder.
B3022P
Plastics Box is made of polyethylene material that
is rust proof, dent-proof, scratch-proof and extreme
temperature-resistant. It also resistant to chemical spills
such as gasoline, oil battery acid or brake fluid.
KTC
ALK 0264-3
Bihexagon
Hexagon
Item TB415X – 21pcs
ALK 0264-5
Item TB415BX – 21pcs
6pt Skt: 7/16”.
12pt Skt: 1/2”, 9/16”, 19/32”, 5/8”, 11/16”, 3/4”,
25/32”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”,
1-1/4”.
Ratchet Handle.
Spinner Handle.
Ext Bar 75, 150mm.
Wobble Ext Bar 100mm.
Universal Joint.
5pc Socket Holder.
Tools are made of chrome vanadium steel, chrome-plated polished. JIS standard for manual drive.
TB410
KTC
Bihexagon
Hexagon
ALK 0264-4
TB415BX
ALK 0264-5
11
ALK 0264-2
Hand Tools
6pt Skt: 8, 10, 11, 12mm.
12pt Skt: 13, 14, 17, 19, 22, 24, 27, 30, 32mm.
Ratchet Handle.
Ext Bar 75, 150mm.
Universal Joint.
Hexagon
TB415X
Item B3013R – 17pcs
219
Hand Tools
TOOLS & SOCKET
TONE 1/2” Dr Socket Set – Japan
TONE
ALK 0265
Description
Code
ALK 0265-1
Bihexagon
12pt Skt: 8, 10, 11, 12, 13, 14, 17, 19, 22, 24mm.
Ratchet Handle.
Ext Bar 150mm.
Sliding T-Handle
Hexagon
Made of chrome vanadium steel, chrome-plated, JIS
standard, for manual drive & metal cases are made of
heavy gauge steel with enamel paint finish.
Bihexagon
Item 800MISO – 13pcs
ALK 0265-2
Metal Case: 342 x 117 x 52mm, 4.5kg; 6 Sets/Box Item 770M – 17pcs
12pt Skt: 8, 10, 11, 12, 13, 14, 17, 19, 22, 24, 27,
30, 32mm.
Ratchet Handle.
Flexible Handle.
Ext Bar 150mm.
Cross Bar.
ALK 0265-3
Metal Case: 342 x 117 x 52mm, 3.5kg; 6 Sets/Box Item 750MS – 18pcs
6pt Skt: 8, 10, 11, 12, 13, 14, 17, 19, 21, 22, 24,
26, 27mm.
Ratchet Handle.
Flexible Handle.
Ext Bar 150mm.
Ball Joint.
Cross Bar.
ALK 0265-4
TONE
Item 260M – 20pcs
12pt Skt: 9, 10, 12, 13, 14, 15, 16, 17, 18, 19, 21, 23,
26, 29, 32mm.
Ratchet Handle.
Flexible Handle.
Sliding T-Handle.
Ext Bar 150mm.
Cross Bar.
ALK 0265-5
Bihexagon
12pt Skt: 8, 9, 10, 11, 12, 13, 14, 17, 19, 21, 22, 23,
24, 26, 27, 29, 30, 32mm.
Ratchet Handle.
Flexible Handle.
Sliding T-Handle.
Ext Bar 75, 150, 250mm.
Universal Joint
Cross Bar.
TONE
ALK 0265-10
Hand Tools
ALK 0265-6
Item 170M – 34pcs
11
12pt Skt: 8, 9, 10, 11, 12, 13, 14, 14.5, 15, 16, 17,
17.5, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
30, 32mm.
Ratchet Handle.
Flexible Handle.
Sliding T-Handle.
Ext Bar 75, 150, 250mm.
Universal Joint.
Cross Bar.
MX400
Made of chrome vanadium steel, chrome-plated, JIS
standard, for manual drive & metal cases are made of
heavy gauge steel with enamel paint finish.
Item 160M – 26 pcs
ALK 0265-7
Item 750 – 18pcs
12pt Skt: 3/8”, 7/16”, 1/2”, 9/16”, 19/32”, 5/8”,
11/16”, 3/4”, 25/32”, 13/16”, 7/8”, 15/16”, 1”.
Ratchet Handle.
Flexible Handle.
Ext Bar 150mm.
Universal Joint
Cross Bar.
ALK 0265-8
Item 260 – 20pcs
12pt Skt: 7/16”, 1/2”, 9/16”, 19/32”, 5/8”, 11/16”,
3/4”, 25/32”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”,
1-1/8”, 1-1/4”.
Ratchet Handle.
Flexible Handle.
Sliding T-Handle.
Ext Bar 150mm.
Cross Bar.
ALK 0265-9
Item 550 – 32pcs
12pt Skt: 10, 11, 12, 13, 14, 17, 19, 21, 22, 24, 26,
27mm.
12pt Skt: 7/16”, 1/2”, 9/16”, 19/32”, 5/8”, 11/16”,
3/4”, 25/32”, 13/16”, 7/8”, 15/16”, 1”.
Ratchet Handle.
Flexible Handle.
Sliding T-Handle.
Ext Bar 75, 150, 250mm.
Universal Joint.
Cross Bar.
ALK 0265-10
Metal Case: 490 x 302 x 65mm, 13kg; 1 Set/Box
12pt Skt: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22,
24, 27, 30, 32mm.
12pt Deep Skt: 12, 13, 14, 17, 19, 21, 24, 30mm.
Hex Skt: 3, 4, 5, 6, 8, 10, 12, 14mm.
Philip Skt: #2.
Flat Skt: (-)6mm.
Ratchet Handle.
Sliding T-Handle.
Ext Bar 75, 150mm, 250mm.
Ball Joint.
Hand Tools
220
TOOLS & SOCKET
m10(R)
Bihexagon
ALK 0266
Description
Code
ALK 0266
Metal Case:
Item M6154 – 19pcs
12pt Skt: 19, 21, 22, 24, 26, 27, 29, 30, 32, 35, 36,
38, 41, 46, 50mm.
Ratchet Handle.
Ext Bar 125, 200mm.
Sliding T-Handle.
M6154
Mirror Finish
Bihexagon
TONE
ALK 0267
Description
Code
ALK 0267-1
12pt Skt: 24, 27, 30, 32, 36, 41, 46, 50mm.
Ratchet Handle
Ext Bar 200,400mm.
Sliding T-Handle.
ALK 0267-2
Item 230M – 26pcs
12pt Skt: 19, 21, 22, 23, 24, 26, 27, 29, 30, 32, 35, 36,
41, 46, 50, 54, 55, 58, 60mm.
Ratchet Handle.
Flexible Handle.
Ext Bar 200, 400mm.
Sliding T-Handle.
Universal Joint.
Metal Case: 552 x 215 x 92mm, 14kg; 1 Set/Box
Item 200 – 17pcs
12pt Skt: 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”,
1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-3/4”, 1-13/16”,
1-7/8”, 2”.
Ratchet Handle.
Ext Bar 200, 400mm.
Sliding T-Handle.
Tone 1” Dr Socket Set – Japan
Bihexagon
TONE
ALK 0268
Description
Code
ALK 0268-1
Item 240M – 13pcs
12pt Skt: 32, 36, 41, 46, 50, 55, 60, 65mm.
Ratchet Handle.
Ext Bar 150, 400mm
Sliding T-Handle.
Handle for Ratchet/Sliding Head.
ALK 0268-2
Metal Case: 845 x 222 x 132mm, 39kg; 2 Sets/Box
12pt Skt: 32, 36, 41, 46, 50, 55, 60, 65, 70, 75, 80,
85mm.
Ratchet Handle.
Ext Bar 150, 400mm.
Slidint T-Handle.
Handle for Ratchet/Sliding Head.
Chrome vanadium steel, chrome-plated, JIS standard, for
manual drive.
m10(R) 1/4”, 1/2”, 3/4” Dr Combination Socket Set – Taiwan
m10(R)
ALK 0269
ALK 0269-1
Bihexagon
Hexagon
Made of chrome vanadium steel, chrome-plated.
Mirror Finish.
Description
Code
Item 146 – 63pcs
1/4” Dr Socket Set
6pt Skt: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm.
6pt Skt: 3/16”, 1/4”, 5/16”, 3/8”.
Ratchet Handle.
Flexible Handle.
Universal Joint.
Sliding T-Handle.
Ext Bar 50, 75mm.
ALK 0269-2
12pt Skt: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32mm.
Ratchet Handle.
T-Handle.
Ext Bar 75, 150, 250mm.
Universal Joint.
ALK 0269-3
12pt Skt: 26, 27, 29, 30, 32, 35, 36, 38, 41mm.
Ratchet Handle.
Ext Bar 200mm.
Hand Tools
ALK 0267-3
11
manual drive.
221
Hand Tools
TOOLS & SOCKET
Tone 1/4”, 1/2”, 3/4” Dr Combination Socket Set – Japan
TONE
ALK 0270
Description
Code
ALK 0270-1
Bihexagon
Hexagon
Item 146 – 65pcs
6pt Skt: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, mm.
6pt Skt: 3/16”, 1/4”, 3/8”.
Ratchet Handle.
Flexible Handle.
Driver Handle.
Ext Bar 50, 150mm.
Sliding T-Handle.
Cross Bar.
Universal Joint.
ALK 0270-2
12pt Skt: 8, 9, 10, 11, 12, 13, 14, 14.5, 15, 16, 17,
17.5, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
30, 32mm.
Ratchet Handle.
Flexible Handle.
Ext Bar 75, 150, 250mm.
Sliding T-Handle.
Universal Joint.
ALK 0270-3
12pt Skt: 26, 27, 29, 30, 32, 35, 36, 38, 41mm.
Ratchet Handle.
Ext Bar 200mm.
manual drive.
Tone 1/4” Dr Deep Socket Set – Japan
Hexagon
TONE
ALK 0271
Description
Code
ALK 0271
Item L2085 – 13pcs
6pt Skt: 6, 7, 8, 10, 11, 12, 13, 14mm.
Ratchet Handle.
Driver Handle.
Ext Bar 50, 150mm.
Universal Joint.
Hand Tools
Made of chrome vanadium steel, chrome-plated.
11
m10(R) 3/8” & 1/2” Dr Star Socket Set – Taiwan
STAR
m10(R)
ALK 0272
Description
Code
ALK 0272
Metal Case: 245 x 127 x 38mm, 1.67kg; 10 Sets/Box Item ET20 – 20pcs
3/8” E-Skt: E6, E7, E8, E10
1/2” E-Skt: E12, E14, E16, E18, E20
3/8” T-Skt: T10, T15, T20, T25, T27
1/2” T-Skt: T30, T40, T45, T50, T55
Skt Adaptor 1/2” x 3/8”
Made of chrome vanadium steel, chrome-plated. Mirror Finish.
KTC 1/4” & 3/8” Dr Torx Socket Set – Japan
TROX
KTC
ALK 0273
Description
Code
ALK 0273
Metal Case: 265 x 120 x 38mm, 1.5kg 1 Set/Box
Item TRX112 – 15pcs
1/4” T-Skt: T10, T15, T20, T25, T27.
3/8” T-Skt: T30, T40, T45, T50.
3/8” E-Skt: E8, E10, E12.
Ratchet Handle.
Ext Bar 75mm.
Adaptor 3/8”F x 1/4”M.
Made of special alloy steel, JIS standard, for manual drive and power drive.
Hand Tools
222
TOOLS & SOCKET
Hex Key Socket Set – Japan
TONE H2072
ALK 0274-1
Description
Code
ALK 0274-1
TONE H2072 (1/4” Dr) – 9pcs
Hex Skt: 3, 4, 5, 6, 8mm.
Driver Bits (-), (+).
Ratchet Handle.
Ext Bar 50mm.
ALK 0274-2
KTC HB2011
KTC HB2011 (3/8” Dr) – 13pcs
Hex Skt: 5, 6, 8, 10, 12mm.
Driver Bits (-), (+).
Ratchet Handle.
Ext Bar 75mm.
Hex Key: 2, 2.5, 3, 4mm.
ALK 0274-2
ALK 0274-3
TONE HB3082 (3/8” Dr) – 10pcs
Hex Skt: 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”,
5/16”, 3/8”.
Ratchet Handle
Ext Bar 75mm.
ALK 0274-4
TONE H3082 ALK 0274-3, 400M ALK 0274-5,
HB4112 ALK 0274-6
Blister Wrap: 280 x 140mm
SUNFLAG 2150 (3/8”) – 10pcs
Hex Skt: 4, 5, 6, 8, 10mm.
Flat Skt: (-)6, 8mm.
Philip Skt: #2, #3.
Ratchet Handle.
ALK 0274-5
TONE 400M (1/2” Dr) – 13pcs
Hex Skt: 3, 4, 5, 6, 8,10, 12, 14, 17mm.
Flat Skt: (-)6mm
Philip Skt: #2.
Ratchet Handle
Ext Bar 150mm.
ALK 0274-6
TONE HB4112 (1/2” Dr) –13pcs
Hex Skt: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”,
7/16”, 1/2”, 9/16”.
Philip Skt: #2.
Ratchet Handle.
Ext Bar 150mm.
ALK 0274-4
11
All of the above metal cases are made of heavy gauge steel with enamel paint finish.
Hand Tools
SUNFLAG 2150
Super Hex Key Socket Set – Japan
BR-2000
ALK 0275-1
Description
Code
ALK 0275-1
Plastic Case: 0.32kg
Item BR-2000 (1/4” Dr) – 9pcs
Hex Skt: 1.5, 2, 2.5, 3, 4, 5mm.
Plug Connector.
Ratchet Handle.
Ext Bar 170mm.
ALK 0275-2
Plastic Case: 0.95kg
Item BR-3000 (3/8” Dr) – 12pcs
Hex Skt: 3, 4, 5, 6, 8, 10mm.
Driver Bit (-) (+).
Plug Connector
Cross Bar.
Speed Driver.
Ratchet Handle.
BR-3000 ALK 0275-2, 4000 ALK 0275-3
ALK 0275-3
Plastic Case: 2.3kg
Item BR-4000 (1/2” Dr) – 12pcs
Hex Skt: 6, 8, 10, 12, 14, 17mm.
Driver Bit (-) (+).
Plug Connector.
Cross Bar.
Speed Driver.
Ratchet Handle.
ALK 0275-4
BR-6000
ALK 0275-4
Steel Case: 8kg
Item BR-6000 (3/4” Dr) – 9pcs
Hex Skt: 14, 17, 19, 22, 24, 27mm.
Extension Bar 200mm.
Sliding T-Handle
Ratchet Handle.
Made of chrome vanadium steel. Hex Bit, Plug Connector and Socket section of Ratchet Handle are in Phosphoric acid
manganese file forming treatment, other parts in Nickel-chrome plated.
223
Hand Tools
TOOLS & SOCKET
m10(R) 1/4” Dr Socket (6pt & 12pt) –
Taiwan
m10(R) 3/8” Dr Socket (6pt & 12pt) –
Taiwan
m10(R) 1/2” Dr Socket (6pt & 12pt) –
Taiwan
ALK 0276
ALK 0277
ALK 0278
Hexagon (6pt)
Hexagon (6pt)
Hexagon (6pt)
Bihexagon (12pt)
Bihexagon (12pt)
Bihexagon (12pt)
DIN standard. (German Institute for Standardization).
Mirror Finish.
Mirror Finish.
Mirror Finish.
Hand Tools
Code
Size (6pt)
Length (mm)
Code
Size (mm)
Length (mm)
Code
Size (mm)
Length (mm)
1
3.2mm
25
1
6
30
1
8
38
2
4.0
2
7
2
9
3
4.5
3
8
3
10
4
5.0
4
9
4
11
5
5.5
5
10
5
12
6
6.0
6
11
6
13
7
7.0
7
12
7
14
8
8.0
8
13
8
15
9
9.0
9
14
9
16
10
10.0
10
15
10
17
11
11.0
11
16
11
18
12
12.0
12
17
12
19
13
13.0
13
18
13
20
14
14.0
14
19
14
21
(12pt)
15
20
15
22
16
21
16
23
25
40
11
15
3.2mm
16
4.0
17
22
17
24
42
17
4.5
18
23
18
25
45
18
5.0
19
24
19
26
19
5.5
20
27
20
6.0
20
1/4”
21
28
21
7.0
21
9/32”
22
29
22
8.0
22
5/16”
23
30
23
9.0
23
11/32”
24
24
10.0
24
3/8”
25
11.0
25
7/16”
25
5/16”
26
12.0
26
1/2”
26
3/8”
27
13.0
27
9/16”
27
7/16”
28
14.0
28
5/8”
28
1/2”
(6pt)
29
11/16”
29
9/16”
(inch)
32
(inch)
29
5/32”
30
3/4”
30
5/8”
30
3/16”
31
13/16”
31
11/16”
31
7/32”
32
7/8”
32
3/4”
32
1/4”
33
15/16”
33
13/16”
33
9/32”
34
1”
34
7/8”
34
5/16”
35
15/16”
35
11/32”
36
1”
36
3/8”
37
1-1/16”
37
7/16”
38
1-1/8”
1/2”
39
1-3/16”
(12pt)
40
1-1/4”
38
39
5/32”
40
3/16”
41
7/32”
42
1/4”
43
9/32”
44
5/16”
45
11/32”
46
3/8”
47
7/16”
48
1/2”
25
30
25
38
40
45
Hand Tools
TOOLS & SOCKET
m10(R) 3/4” Dr Socket (12pt) –
Taiwan
m10(R) 1” Dr Socket (12pt) – Taiwan
ALK 0279
Bihexagon (12pt)
m10(R) 1/4” Dr Deep Socket (6pt &
12pt) – Taiwan
ALK 0281
ALK 0280
Bihexagon (12pt)
224
Hexagon (6pt)
Bihexagon (12pt)
Mirror Finish.
Mirror Finish.
Code
Size (mm)
Length (mm)
Code
Size (mm)
Length (mm)
Code
Size (6pt)
Length (mm)
1
17
50
1
35
61
1
3.2mm
50
2
18
2
36
65
2
4
3
19
3
38
3
4.5
4
20
4
41
70
4
5
5
21
5
46
75
5
5.5
6
22
6
50
6
6
7
23
7
54
7
7
8
24
51
8
55
8
8
9
25
52
9
58
9
9
10
26
10
60
84
10
10
11
27
11
63
87
11
11
12
28
12
65
12
12
13
29
13
67
90
13
13
14
30
54
14
70
93
14
15
31
56
15
71
16
32
16
75
97
15
3.2mm
17
33
17
77
103
16
4
18
34
80
17
4.5
19
35
(inch)
18
5
20
36
19
5.5
21
38
22
40
23
41
24
42
25
44
26
27
14
(12pt)
19
1-1/16”
60
20
1-1/8”
20
6
62
21
1-1/4”
21
7
64
22
1-5/16”
22
8
23
1-3/8”
23
9
66
24
1-7/16”
24
10
46
68
25
1-1/2”
25
11
48
70
26
1-5/8”
26
12
28
50
72
27
1-11/16
27
13
29
54
74
28
1-3/4”
30
55
76
29
1-13/16”
31
58
78
30
1-7/8”
29
5/32”
32
60
31
2”
30
3/16”
32
2-1/16”
31
7/32”
33
2-1/8”
32
1/4”
33
9/32”
(inch)
52
61
65
70
75
28
14
(6pt)
80
33
3/4”
34
13/16”
34
2-3/16”
35
7/8”
35
2-1/4”
34
5/16”
36
15/16”
36
2-3/8”
84
35
11/32”
37
1”
37
2-7/16”
87
36
3/8”
38
1-1/16”
38
2-1/2”
37
7/16”
39
1-1/8”
39
2-5/8”
90
40
1-3/16”
40
2-3/4”
93
41
1-1/4”
41
2-13/16”
39
5/32”
42
1-5/16”
42
2-15/16”
97
40
3/16”
103
41
7/32”
43
1-3/8”
54
43
3”
44
1-7/16”
56
44
3-1/8”
45
1-1/2”
46
47
48
38
1/2”
1/4”
58
43
9/32”
1-9/16”
62
44
11/32”
1-5/8”
65
45
3/8”
1-11/16”
68
46
7/16”
47
1/2”
49
1-3/4”
1-13/16”
51
1-7/8”
72
52
2”
74
70
50
(12pt)
42
50
50
11
18
58
80
Hand Tools
Mirror Finish.
50
225
Hand Tools
TOOLS & SOCKET
12pt) – Taiwan
12pt) – Taiwan
ALK 0282
m10(R) Socket Adaptors – Taiwan
ALK 0283
m10(R)
ALK 0284
Hexagon (6pt)
Hexagon (6pt)
Bihexagon (12pt)
Bihexagon (12pt)
Mirror Finish.
Mirror Finish.
Chrome vanadium steel, chrome-plated, for manual drive.
Code
Female x Male
Length (mm)
Code
Size (6pt)
Length (mm)
Code
Size (mm)
Length (mm)
1
1/4” x 3/8”
25
1
8
63
1
8
78
2
3/8” x 1/4”
30
2
9
2
9
3
3/8” x 1/2”
30
3
10
3
10
4
1/2” x 3/8”
35
4
11
4
11
5
1/2” x 3/4”
35
5
12
5
12
6
3/4” x 1/2”
48
6
13
6
7
3/4” x 1”
48
7
14
13
7
15
14
8
8
1” x 3/4”
48
8
15
9
16
10
17
11
18
12
19
13
21
(12pt)
Hand Tools
14
8
15
9
16
63
10
9
16
10
17
11
18
TONE
12
19
ALK 0285
13
20
14
21
15
22
16
23
17
24
Tone Flex Ball Joint – Japan
11
17
11
18
12
18
25
19
13
19
26
20
14
20
27
21
15
21
28
Code
Item
Dr
Length (mm)
22
16
22
29
1
BJ30
3/8”
44
23
17
23
30
2
BJ40
1/2”
60
24
18
24
32
25
19
26
21
25
3/8”
(6pt)
26
7/16”
27
1/2”
9/16”
27
1/4”
(inch)
63
28
5/16”
28
29
3/8”
29
5/8”
30
7/16”
30
31
1/2”
11/16”
31
32
9/16”
3/4”
32
13/16”
33
5/8”
34
11/16”
35
3/4”
36
13/16”
37
7/8”
38
15/16”
39
1”
(12pt)
40
1/4”
41
5/16”
42
3/8”
43
7/16”
44
1/2”
45
9/16”
46
5/8”
47
11/16”
48
3/4”
49
13/16”
50
7/8”
51
15/16”
52
1”
63
33
7/8”
34
15/16”
35
1”
36
1-1/16”
37
1-1/8”
38
1-3/16”
39
1-1/4”
40
1-1/2”
78
m10(R) Universal Joint – Taiwan
m10(R)
ALK 0286
Code
Item
Dr
Length (mm)
1
UJ02
1/4”
42
2
UJ03
3/8”
56
3
UJ04
1/2”
72
4
UJ06
3/4”
109
5
UJ08
1”
143
Hand Tools
TOOLS & SOCKET
Ktc Extension Bars – Japan
m10(R) Flex Extension Bar – Taiwan
Tone Extension Bars – Japan
TONE
KTC
ALK 0287
226
ALK 0289
ALK 0288
code
Dr
Length (mm)
ALK 0289
1/4”
150
Chrome-vanadium steel, chrome-plated.
Code
Dr
Length (mm)
Code
Dr
Length (mm)
1
1/4”
30
1
1/4”
50
2
50
2
75
3
75
3
100
4
100
4
5
150
5
6
200
6
50
7
270
7
75
8
400
8
150
9
600
9
250
30
10
300
11
40
11
12
50
12
13
75
14
3/8”
10
m10(R) Ratchet Handle With Quick
Release – Taiwan
(Quick Release)
ALK 0290 (1-3)
150
3/8”
32
600
(Quick Release)
ALK 0291 (4--5)
06500, 08665 Chrome Molybdenum Square Dr
ANSI and DIN Spec
75
Code
Dr
Width (mm)
O.L (mm)
13
150
1
1/4”
23
144
100
14
250
2
3/8”
31
199
15
150
15
600
3
1/2”
42
255
16
200
16
75
4
3/4”
60
500
17
270
17
125
5
1”
70
665
18
300
18
200
600
19
400
1/2”
20
3/4”
Chrome-vanadium steel, chrome-plated. Mirror Finish.
11
19
1/2”
02144, 03199, 04255
50
21
75
22
100
23
150
24
200
25
250
26
270
27
600
28
1000
Armstrong Black Oxide Ratchet
Handle – USA
m10(R) Flexible Ratchet Handle With
Quick Release – Taiwan
ALK 0292
(Quick Release)
ALK 0293 (1), (3), (5)
02160F, 03300F, 04430F (Fexible)
Code
Dr
Width (mm)
O.L (mm)
ALK 0292
1-1/2”
3.75”
30”
(Quick Release)
ANSI and DIN Spec
ALK 0294 (2), (4), (6)
Made of heat-treated alloy steel, ANSI B107.10m, Fed’l
Spec GGG-W-641e.
02096S, 03115S, 04170S (Fexible Short)
ANSI and DIN Spec
KTC Ratchet Handles – Japan
KTC Flex Extension Bars – Japan
ALK 0295
ALK 0296
(Flat Head)
Code
Dr
Width (mm)
O.L (mm)
1
1/4”
22
160
2
3
3/8”
23
96
29
300
115
4
Code
Dr
Width (mm)
O.L (mm)
Code
Dr
Length (mm)
1
1/4”
22
125
1
1/4”
150
2
3/8”
33
180
2
3/8”
200
3
1/2”
39.5
250
For light load operation. Made of chrome vanadium steel,
chrome-plated, for manual use.
Hand Tools
5
6
1/2”
37
430
170
Chrome-vanadium steel, chrome-plated. Mirror Finish.
227
Hand Tools
TOOLS & SOCKET
RATCHET HANDLES – Japan
TONE 171 (1), 271 (5), 371 (7)
ARMSTRONG - USA 10-972 (3), 12-972 (9)
Code
Item
Dr
Width (mm)
O.L (mm)
No. of Teeth
1
171
1/4”
24mm
115
18
ALK 0297
SEK 1241(2), TONE RH41(10)
TONE 171B (4), 271B (7),
371B (8), 471B (13)
(Female)
ALK 0297
TONE 471 (11), 571 (14)
ALK 0297
2
1241
3
10-972
4
171B (Female)
5
271
6
217B (Female)
130
-
0.875”
134
36
18
24mm
115
3/8”
36mm
190
1/2”
45mm
270
7
371
8
371B (Female)
9
12-972
1.625”
267
36
10
RH41
35mm
250
45
11
471
3/4”
61mm
500
24
12
GP471N
13
471B (Female)
3/4”
61mm
500
14
571
1”
64mm
755
20
Spare Jaw For 471
24
m10(R) T-Handles – Taiwan
m10(R) Offset L-Handles – Taiwan
m10(R)
ALK 0298
Double Size
KTC Flex Handles – Japan
m10(R)
KTC
ALK 0299
ALK 0300
Corners on sq. dr are rounded to
reduce stress on sockets.
Hand Tools
Single Size
11
Code
Dr
Length (mm)
1
1/4”
115
2
3/8”
200
3
1/2”
250
4
1/2”
305
Code
Dr
Length (mm)
4
5
3/4”
500
ALK 0299-1
1/2” – Double
250
5
6
1”
550
ALK 0299-2
1/2” – Single
250
6
ALK 0299-3
3/4” – Single
315
7
ALK 0299-4
1” – Single
660
8
Code
Size (mm)
Length (mm)
14
20
1
7
28
15
21
2
8
3
9
4
10
5
11
6
7
Corners on sq. dr are rounded to
reduce stress on sockets.
Code
Dr
Length (mm)
1
1/4”
150
3/8”
300
1/2”
400
3/4”
500
3
m10(R) Speeder Handle – Taiwan
200
2
400
600
1000
m10(R)
ALK 0301
Ball Type
Model No.
Dr
Length (mm)
ALK 0301
3/8”
350
m10(R) 3/8” Dr Impact Socket (6pt) – Taiwan
ALK 0302
Hexagon (6pt)
Made of chrome-molybdenum steel, black for electric
and pneumatic tools.
DIN standard.
(German Institute for Standardization).
16
22
(inch)
17
5/16”
18
3/8”
12
19
7/16”
13
20
1/2”
8
14
21
9/16”
30
9
15
22
5/8”
10
16
23
11/16”
11
17
24
3/4”
12
18
25
13/16”
13
19
26
7/8”
28
30
Hand Tools
m10(R) 3/4” Dr Impact
Socket (6pt) – Taiwan
ALK 0303
Hexagon (6pt)
ALK 0304
Hexagon (6pt)
Made of chrome-molybdenum steel,
black for electric and pneumatic tools.
DIN standard.
Size (mm)
Length (mm)
Code
1
8
38
1
2
9
3
3
10
4
11
5
12
6
13
7
7
14
8
8
15
9
4
5
6
9
16
10
10
17
11
11
18
12
19
13
21
14
22
15
23
16
24
17
26
18
27
19
20
30
12
13
39
14
15
16
41
17
18
44
19
20
50
32
21
22
23
(inch)
24
21
5/16”
22
3/8”
38
26
23
25
7/16”
27
24
1/2”
28
25
9/16”
29
26
5/8”
27
11/16”
30
40
31
28
3/4”
29
13/16”
30
7/8”
42
34
31
15/16”
45
35
32
33
32
1”
36
33
1-1/16”
37
34
1-1/8”
35
1-1/4”
38
39
40
41
42
43
44
45
46
47
48
49
50
51
Armstrong 1-1/2” Dr
Impact Socket (6pt) – USA
Size (mm)
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
40
41
42
46
50
54
55
60
(inch)
11/16”
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
1-11/16”
1-3/4”
1-13/16”
1-7/8”
1-15/16”
2”
Length (mm)
58
Code
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
50
32
33
34
35
36
37
53
38
39
55
40
41
42
56
Hexagon (6pt)
DIN standard.
2
62
68
72
ALK 0306
ALK 0305
Hexagon (6pt)
DIN standard.
Code
2
m10(R) 1” Dr Impact
43
44
45
46
47
48
49
50
51
52
53
54
55
56
Size (mm)
19
20
22
23
24
25
26
27
28
29
30
32
33
34
35
36
37
38
40
41
42
44
46
48
50
52
54
55
58
60
63
65
67
70
71
75
(inch)
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
1-11/16”
1-3/4”
1-13/16”
1-7/8”
1-15/16”
2”
Made of chrome-molybdenum steel, black
finish for electric and pneumatic tools.
ANSI B107.2, Fed’l Spec, GGG-W-660a
Code
Size
Length
1
1-3/8”
3.125”
2
1-7/16”
3.125”
3
1-1/2”
3.125”
4
1-9/16”
3.220”
5
1-5/8”
3.125”
6
1-11/16”
3.125”
7
1-3/4”
3.310”
8
1-13/16”
3.310”
9
1-7/8”
3.500”
10
1-15/16”
3.625”
11
2”
3.625”
12
2-1/16”
3.625”
13
2-1/8”
3.625”
14
2-3/16”
3.625”
15
2-1/4”
3.940”
16
2-5/16”
3.940”
17
2-3/8”
4.125”
18
2-7/16”
4.125”
68
69
19
2-1/2”
4.125”
20
2-9/16”
4.125”
21
2-5/8”
4.250”
73
22
2-11/16”
4.280”
23
2-3/4”
4.375”
24
2-13/16”
4.375”
25
2-7/8”
4.500”
26
2-15/16”
4.500”
27
3”
4.625”
28
3-1/16”
4.655”
29
3-1/8”
4.655”
30
3-3/16”
4.750”
31
3-1/4”
4.830”
32
3-5/16”
4.890”
33
3-3/8”
4.625”
34
3-7/16”
4.985”
35
3-1/2”
5.000”
36
3-9/16”
5.125”
37
3-5/8”
5.125”
38
3-11/16”
5.250”
39
3-3/4”
5.250”
40
3-13/16”
5.370”
41
3-7/8”
5.370”
42
3-15/16”
5.480”
43
4”
5.480”
44
4-1/16
5.530”
45
4-1/8”
5.530”
46
4-3/16”
5.600”
47
4-1/4”
5.600”
48
4-5/16”
5.765”
49
4-3/8”
5.765”
50
4-7/16”
5.835”
51
4-1/2”
6.000”
52
4-5/8”
6.000”
53
4-3/4”
6.140”
54
5”
7.000”
Length (mm)
57
60
63
65
66
70
75
80
55
62
68
74
Hand Tools
11
TOOLS & SOCKET
228
229
Hand Tools
TOOLS & SOCKET
Deep Socket (6pt) – Taiwan Deep Socket (6pt) – Taiwan
Hexagon (6pt)
ALK 0307
DIN standard.
Hexagon (6pt)
Size (mm)
Length
Code
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
26
27
30
32
80
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Hand Tools
19
20
21
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
KTC 3/8” Dr Impact Deep
Socket (6pt) – Japan
11
ALK 0311
23
24
25
26
27
Hexagon (6pt)
KTC Item BP3L-T
28
29
30
31
Super chrome vanadium steel, JIS
standard, for electric and pneumatic
power tools.
Code
1
2
3
4
5
6
7
8
9
10
11
12
13
Size (mm)
6
7
8
9
10
11
12
13
14
17
19
21
22
Length (mm)
55
32
33
34
35
36
37
38
39
40
41
42
80
ALK 0308
DIN standard.
Code
43
44
45
46
47
48
Size (mm)
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
38
41
42
46
50
55
60
(inch)
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-3/4”
1-13/16”
1-7/8”
1-15/16”
2”
Length
100
Code
1
Hexagon (6pt)
KD
2
3
4
5
6
Made of chrome-molybdeum steel, black
finish for electric and pneumatic tools.
Fed’l Spec. GGG-W-660A, ANISI B107.2
8
9
Size
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
Hexagon (6pt)
Code
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
100
28
29
30
31
32
33
34
35
36
37
38
Size (mm)
19
20
21
22
23
24
26
27
28
29
30
32
33
34
35
36
38
41
42
46
50
(inch)
3/4”
13/16”
7/8”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-3/4”
1-13/16”
1-7/8”
2”
Tone Impact Socket
Adaptors – Japan
TONE
ALK 0309
DIN standard.
2
Length
108
ALK 0310
power tools.
Code
Female x Male Length (mm)
1/4” x 3/8”
22
2
3/8” x 1/2”
32
3
1/2” x 3/8”
38
4
1/2” x 3/4”
42
5
3/4” x 1/2”
50
6
3/4” x 1”
60
7
1 x 3/4”
63
8
1 x 1-1/2”
90
9
1-1/2” x 1”
87
Note: Item 22-952 & 23-951 are Armstrong
Brand
1
Tone Impact Universal
Joints – Japan
TONE
ALK 0312
108
power tools.
Code
Dr
Length (mm)
3/8”
50
2
1/2”
85
3
3/4”
108
4
1”
138
5
1-1/2”
150
Note: Item 23-947 is Armstrong Brand
1
Tone Impact Extension Bars
– Japan
TONE
ALK 0313
power tools.
Code
1
Dr
3/8”
2
3
1/2”
4
Kd 3/8” Dr Impact Long Socket (6pt) – USA
ALK 0314
m10(R) 1” Dr Impact Deep
5
Length (mm)
62
6
3/4”
7
8
9
10
11
1”
Length (mm)
75
100
75
100
150
100
150
250
150
200
250

Hand Tools 178 ALLEN KEYS

Transcription

Similar documents

new - Wilmink

Cut Sheet for Clamps and Fittings

RIDGID® tool - Deacon Industrial Supply

wellteam-Druckverfahren

DIHK-Sonderauswertung Finanzierungskonditionen

Fasteners |fournitures

SWAG Extra