9000.00-2 Technical CDD-9000T
Transcription
9000.00-2 Technical CDD-9000T
BULLETIN 9000.00-2 SEPTEMBER 2015 APCO CDD-9000T DOUBLE DOOR CHECK VALVE TECHNICAL SPECIFICATIONS www.dezurik.com Materials of Construction DUCTILE IRON BODY Item Description 2 A1 Body A2 Door A3 Seat A4 A5 A6 A7 Spring Hinge Pin / Stop Pin Pin Retainer (NPT Plug) Lifting Eye Bolt (10" & larger) © 2015 DeZURIK, Inc. Material Ductile Iron, ASTM A536 Aluminum Bronze, ASTM B148, Alloy 952 316 Stainless Steel, ASTM A351, CF8M EPDM - Terpolymer of Ethylene, Propylene and a Diene NBR - Acrylonitrile-Butadiene FKM - Fluoro Rubber 316 Stainless Steel 316 Stainless Steel Carbon Steel Carbon Steel www.dezurik.com LUGGED BODY CARBON STEEL OR STAINLESS STEEL WAFER BODY CARBON STEEL OR STAINLESS STEEL Item Description A1 Body A2 Door A3 Seat A4 A5 A7 Spring Hinge Pin / Stop Pin Lifting Eye Bolt (8" & larger) A8 Cap www.dezurik.com Material Carbon Steel, ASTM A216, Grade WCB 316 Stainless Steel, ASTM A351, Grade CF8M 316 Stainless Steel, ASTM A351, CF8M FKM - Fluoro Rubber NBR - Acrylonitrile-Butadiene Metal - same as body material on 316 Stainless Steel body; Carbon Steel with Stainless Steel inlay on Carbon Steel body. 316 Stainless Steel 316 Stainless Steel Carbon Steel Carbon Steel, ASTM A105 316 Stainless Steel, ASTM A351, Grade CF8M 3 Valve Selection Shutoff Capabilities Seat-Type Resilient Metal Shutoff Bubble Tight Seal that Meets or Exceeds API 598 Test Requirements Meets or exceeds API 598 Test Requirements Pressure Ratings Sizes 2-6" (50-150mm) wafer bodies are dual pressure rated for both ASME B16.42/B16.5 Class 150 and 300. Valve Size Pressure Rating 2-6" Class 300 Ductile Iron 2-36" Class 150 Ductile Iron 2-6" Carbon Steel 2-36" Carbon Steel 2-6" Stainless Steel 2-36" Stainless Steel 640 psi (4412 kPa) CWP* 250 psi (1723 kPa) CWP* 740 psi (5100 kPa) CWP* 285 psi (1960 kPa) CWP* 720 psi (4965 kPa) CWP* 275 psi (1900 kPa) CWP* * Cold Working Pressure Temperature Ratings Seat Material Temperature Rating EPDM - Terpolymer of Ethylene, Propylene and a Diene NBR - Acrylonitrile-Butadiene FKM - Fluoro Rubber -20 to 300° F (-28 to 184° C) -20 to 250° F (-28 to 121° C) -40 to 400° F (-40 to 204° C) Applicable Standards APCO (CDD) Double Door Check Valves are designed and/or tested to meet the following standards: ASME/API 594 ASME B16.5 ASME B16.34 ASME B16.42 API 598 Valve Design Manufacture & Valve Face to Face Dimensions, Carbon Steel or Stainless Steel Only Flange Dimensions & Pressure Ratings Valves - Flanged, Threaded, and Welding End Ductile Iron Pipe Flanges and Flanged Fittings Valve Inspection and Pressure Test Flow Parameters Valve Size Cv* Kv* 100% Open 2" 50mm 2.5" 65mm 3" 80mm 4" 100mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm 30" 750mm 36" 900mm 62 54 110 95 175 151 350 303 850 735 1500 1298 2400 2076 3700 3201 5400 4671 8250 7136 10400 8996 14200 12283 23000 19895 37000 32000 55000 47600 *Cv = Flow in GPM of water at 1 psi pressure drop. *Kv = Flow in m3/hr. of water at 100 kPa pressure drop. Weights Valve Size Ductile Iron 2" 50mm 2.5" 65mm 3" 80mm 4" 100mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm 30" 750mm 36" 900mm 4 2 5 3 7 4 14 7 27 13 43 20 70 32 108 50 175 80 200 91 258 118 345 157 460 209 1000 457 1900 865 Carbon Steel / Stainless Steel (Lugged) 8 4 Contact DeZURIK 16 8 28 13 50 23 95 44 150 69 242 110 Contact DeZURIK Pounds Kilograms Pressure - Temperature Ratings Carbon Steel & Stainless Steel ASME Class 150, 8" (200mm) and larger wafer bodies, all lugged bodies Velocity Range 2-36" 50-900mm Ductile Iron 4 Velocity not to exceed 10 ft/sec or go below 5 ft/sec Carbon Steel & Stainless Steel ASME Class 300, 2-6" (50-150mm) wafer bodies www.dezurik.com Ordering To order, simply complete the valve order code from information shown. Valve Style Give valve style code as follows: Door Material Give door material code as follows: CDD Ductile Iron Body ALB = Aluminum Bronze S2 = 316 Stainless Steel = Double Door Check Valve Valve Size Give valve size code as follows: 2 2.5 3 4 6 8 10 12 = 2" = 2.5" = 3" = 4" = 6" = 8" = 10" = 12" 50mm 65mm 80mm 100mm 150mm 200mm 250mm 300mm 14 16 18 20 24 30 36 = = = = = = = 14" 16" 18" 20" 24" 30" 36" 350mm 400mm 450mm 500mm 600mm 750mm 900mm Body Style Give body style code as follows: 9000T = Double Door Check Carbon Steel and Stainless Steel Bodies S2 = 316 Stainless Steel Seat Material Give seat material code as follows: EPDM = Terpolymer of Ethylene, Propylene and a Diene, -20º to 300° F (-28º to 184º C) NBR = Acrylonitrile-Butadiene (Not available with 316 Stainless Steel bodies) -20º to 250° F (-28º to 121° C) FKM = Fluoro Rubber (S2 door material only) -40º to 400° F (-40º to 204º C) M =Metal, same as body material. CS body material with "M" seat material has a Stainless Steel inlay Spring Material Give spring material code as follows: Ductile Iron Body S2 = 316 Stainless Steel Carbon Steel and Stainless Steel Bodies INCX = Nickel-chromium alloy End Connection Give end connection code as follows: Hinge & Stop Pin Material Give hinge & pin stop material code as follows: S2 = 316 Stainless Steel Ductile Iron Body W1W2 = Wafer ASME 250/300 (2-6" Only) W1 = Wafer ASME 125/150 (8-36" Only) Carbon Steel and Stainless Steel Bodies W1W2 = Wafer ASME 250/300 (2-6" Only) W1 = Wafer ASME 125/150 L1 = Lugged ASME 125/150 Body Material Give body material code as follows: DI CS S2 = = = Options Give options code as follows: DTR = DeZURIK Standard Certified Hydrostatic & Seat Test Report Ordering Example: CDD,10,9000T,W1,DI,S2-NBR-S2-S2,DTR* Ductile Iron Carbon Steel, 2-36" (50-900mm) only 316 Stainless Steel, 2-36" (50-900mm) only www.dezurik.com 5 Dimensions Ductile Iron Body Valve Size A B Diameter C Diameter D Diameter E Diameter 2" 50mm 2.5" 65mm 3" 80mm 4" 100mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm 30" 750mm 36" 900mm 2.12 54 2.12 54 2.25 57 2.50 64 3.00 76 3.75 95 4.25 108 5.62 143 7.25 184 7.50 191 8.00 203 8.37 213 8.75 222 12.00 305 14.50 368 4.37 111 5.12 130 5.75 146 7.12 181 9.87 251 11.00 279 13.37 340 16.12 409 17.75 451 20.25 514 21.62 549 23.87 606 28.25 718 34.75 883 41.25 1048 2.00 51 2.50 64 3.00 76 4.00 102 6.00 152 8.00 203 10.00 254 12.00 305 14.00 356 16.00 406 18.00 457 20.00 508 24.00 610 30.00 762 36.00 914 2.62 67 3.12 79 3.87 98 4.75 121 7.00 178 9.00 229 11.00 279 13.25 337 14.25 362 16.25 413 18.12 460 20.12 511 24.00 610 30.75 781 34.00 865 0.00 0 1.26 32 2.36 60 3.43 87 5.32 135 7.48 190 9.45 240 11.26 286 11.26 286 13.70 348 15.63 397 17.64 448 21.97 558 28.72 730 25.50 648 Inch Millimeter 6 www.dezurik.com Dimensions Carbon Steel or Stainless Steel Body Valve Size A B Diameter C Diameter D Diameter E Diameter F Diameter 2" 50mm 2.5" 65mm 3" 80mm 4" 100mm 6" 150mm 8" 200mm 10" 250mm 12" 300mm 14" 350mm 16" 400mm 18" 450mm 20" 500mm 24" 600mm 30" 750mm 36" 900mm 2.38 60 2.62 67 2.88 73 2.88 73 3.87 98 5.00 127 5.75 146 7.12 181 7.25 184 7.50 191 8.00 203 8.62 219 8.75 222 12.00 305 14.50 368 2.00 51 2.50 64 3.00 76 4.00 102 6.52 166 8.00 203 10.00 254 12.00 305 13.26 337 15.24 387 17.24 438 19.50 495 23.42 595 28.94 735 34.44 875 2.16 55 2.67 68 3.23 82 4.25 108 6.38 162 8.66 220 10.63 270 12.60 320 13.78 350 15.75 400 17.24 438 19.50 495 23.42 595 28.94 735 34.44 875 4.33 110 5.04 128 5.31 135 7.05 179 9.81 249 10.91 277 13.27 337 16.02 407 17.64 448 20.15 512 21.54 547 23.78 604 28.15 715 34.75 883 41.25 1048 4.75 121 5.50 140 6.00 152 7.50 191 9.50 241 11.75 298 14.25 362 17.00 432 18.75 476 21.25 540 Contact DeZURIK 25.00 635 29.50 749 36.00 914 42.75 1086 0.94 24 1.69 43 2.36 60 3.54 90 5.31 135 7.13 181 8.82 224 10.47 266 11.81 300 14.29 363 15.87 403 18.03 458 22.28 566 25.25 641 25.50 648 Inch Millimeter www.dezurik.com 7 Sales and Service For information about our worldwide locations, approvals, certifications and local representative: Web Site: www.dezurik.com E-Mail: [email protected] 250 Riverside Ave. N. Sartell, Minnesota 56377 • Phone: 320-259-2000 • Fax: 320-259-2227 DeZURIK, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing by DeZURIK, Inc. Certified drawings are available upon request. Printed in the U.S.A.