Concealed Wallmount Bedpan Cleansers

Transcription

Concealed Wallmount
Bedpan Cleansers
Specification: (example)
• Concealed in-wall
• Single handle mixing control valve
53T5547
• Integral check stops
• Polished chrome plated finish trim
• 57mm (2.24") ADA lever blade handle
• Rigid wall spout, spray bedpan outlet, insulated bent tube and handle
• 1500mm (59") reinforced hose and hanger, with stop
Engineer/Architect Approval
Model Specified:
and …with … (add spout required)
Approval:
with … quick disconnect
(Add suffix QD if required - See Back Page)
DESCRIPTION
Single Handle Concealed Wallmount
Bedpan Cleanser
Date:
PRODUCT NO.
53T5
4
VB/SPOUT
7
HANDLE
OUTLET
✔
✔
✔
0
0
0
1
1
1
2
2
2
3
3
3
Wallmounted
Vacuum Breaker
& Spout
4
4
With
Self-close
Stop
✔
4
5
Double-check
Vacuum Breaker
Spout
5
5
6
Pressure
Vacuum Breaker
and Spout
6
6
7
7
7
8
8
8
9
9
9
No. 6 Vacuum Breaker recommended for High Hazard Cross Connections and Continuous Pressure.
Check with Local Code Authorities for proper cross flow protection requirements.
Refer to www.specselect.com for individual models.
57mm (2.24'')
Lever Blade Handle
✔
Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Page 8.C.1
Concealed Wallmount
Bedpan Cleansers
Approvals:
SINGLE LEVER
• CSA certified
• Complies to ASME A112.18.1
• ADA Compliant and meets
Handicapped Accessibility
Standard ASME A117.1
of less than 5 lbs. operating force.
RED ZONE
(HOT)
BLUE ZONE
(COLD)
STOPS
178mm
(7.0")
Vacuum Breakers/Spouts:
1/2" UNIVERSAL
INLETS/OUTLETS
METAL BLADE
HANDLE
CL VALVE
• Spout No. 3 VB certified under ASSE
1001 and CSA Standard B64.1.1
FACE OF PLASTER
GUARD SHOULD BE
FLUSH WITH FINISH
WALL LINE.
140mm
(5.5")
1035 and CSA Standard B64.8
BODY
OPTIONAL
HOT & COLD
INLETS
914mm
(36.0")
OPTIONAL
(Contact Delta Representative for State and/or
Local Approvals.)
NO. 5 SPOUT
38mm
(1.5”)
3/8” NPT
FLOWRATE vs PRESSURE
FLOW
(l/min.)
(NOT
SUPPLIED)
FLOW
(USGPM)
4.5
17
16
80mm
(3.13”)
4
15
14
3.5
13
12
F
NO. 3 and NO. 6 SPOUTS
3
11
10
44mm-76mm
(1.75"-3.0")
2.5
9
8
2
7
6
1.5
5
4
3
1
2
.5
1
0
51mm
(2.0")
(NOT
SUPPLIED)1/2”
FNPT/COPPER
1/2” NPT
133mm
(5.25”)
64mm±10mm
(2.5"±.385")
*2210mm
(87.0")
51mm
(2.0”)
(NOT
SUPPLIED)
89mm
(3.5")
0
0
10
20
30
40
50
60
70
80
Line Pressure (psig)
Bedpan Washer Outlet
With Stop
45-74mm
(1.75"-2.9")
137mm
(5.4")
64mm
(2.5")
❏ ADD Suffix “QD” to Product Number
102mm
(4.0")
57mm
(2.25")
Note: Measurements may vary ± 6mm (0.25'')
INLETS - 53T5 Series 1/2'' FIP/Copper
DSP–53T5
060252A
Quick Disconnect
Hose Connectors
*Suggested - Check local building code requirements on backflow protection and all installation heights.
Single and Mixing
Bedpan Cleansers
• Cast brass, volume control valve
• Integral stop, polished chrome plated finish
• Tuf-Teck institutional structure
• Color indexed, 70mm (2-3/4'') ADA compliant
lever blade handle
• Vandal resistant handle screw, rigid wall spout,
spray bedpan outlet, insulated bent tube and handle
• 1500mm (59'')reinforced hose and hanger,
with stop
and … with … (add control required)
with … (add spout required)
with … quick disconnect (add suffix QD
if required - See Back Page)
• Wallhung, forged brass
• Self close foot pedal valve, aluminum pedal,
integral inlet/outlet stops, polished chrome plated finish
• Rigid wall spout, spray bedpan outlet, insulated bent
tube and handle
• 1500mm (59'') reinforced hose and hanger,
with stop
and … with … single or double valve, (as required)
54T1354A
Model Specified:
Approval:
DESCRIPTION
Volume Control Valves
54T1
PRODUCT NO.
1&2
4
Foot Pedal Valves Only
54T1
3&4
4
CONTROL
Date:
A
OUTLET
SPOUT
✔
0
✔
0
Use “0” in this
column ONLY when
Control “1” Specified
✔
0
1
Wallmounted Valve,
Double-check
Vacuum Breaker
1
1
2
In-wall Valve with
Integral Stop
2
2
3
Single
Wallmount
Valve
3
4
Double
Wallmount
Valve
4
Wallmounted
Vacuum Breaker
& Spout
3
4
5
5
Double-check
Vacuum Breaker
Spout
5
6
6
Pressure
Vacuum Breaker
and Spout
6
7
7
7
8
8
8
9
9
9
No. 6 Vacuum Breaker recommended for High Hazard Cross Connections and Continuous Pressure.
Check with Local Code Authorities for proper cross flow protection requirements.
With
Self-close
Stop
✔
Page 8.C.2
Single and Mixing
Bedpan Cleansers
Approvals:
NO. 1 CONTROL
• CSA certified
159mm
(6.25”)
Standard ASME A117.1 of less than
5 lbs. operating force.
1035 and CSA Standard B64.8
• IAPMO listed
Local Approvals.)
48mm
*1067mm
(42.0”)
(NOT
SUPPLIED)
NO. 3 and NO. 4 CONTROLS
62mm
(2.44”)
51mm
(2") DIA.
1/2”
NPT
502mm
(19.75”)
71mm
(2.80”)
154mm
(6.06”)
154mm
(6.06”) 92mm
(3.63”)
95mm
(3.75”)
54mm
(2.13”)
MIN
4.5
114mm
(4.50”)
70mm
(2.75")
368mm to 391mm
(14.50" to 15.38")
4
15
29mm DIA.
(1.13”)
1/2” F.I.P.
FLOW
(USGPM)
16
70mm
(2.75”)
222mm
(8.75”)
17
35mm DIA.
(1.38”)
Hole
1/2” F.I.P.
3/8” NPT
Vacuum Breakers/Spouts:
FLOW
(l/min.)
NO. 2 CONTROL
44-66mm
(1.75-2.5”)
NO. 5 SPOUT
14
3.5
13
12
10
38mm
(1.5”)
3/8” NPT
3
11
2.5
9
8
(NOT SUPPLIED)
2
7
6
1.5
80mm
(3.13”)
5
4
3
1
2
.5
1
0
0
0
10
20
30
40
50
60
70
80
Bedpan Washer Outlet
With Stop
Note: For Control Option No. 3 & 4 it is
strongly recommended that each supply
line be equipped with a hammer
arrestor installed per manufacturer’s
instructions.
❏ 060327A
1/2" NPT Water Hammer Arrestor
DSP–54T1
NO. 3 and NO. 6 SPOUTS
44mm-76mm
1/2”
(1.75"-3.0")
FNPT/COPPER
51mm
(2.0")
(NOT
SUPPLIED)
1/2” NPT
64mm±10mm
(2.5"±.385")
*2210mm
(87.0")
89mm
(3.5")
137mm
(5.4")
51mm
(2.0”)
(NOT
SUPPLIED)
45-74mm
(1.75"-2.9")
133mm
(5.25”)
❏ ADD Suffix “QD” to Product Number
64mm
(2.5")
102mm
(4.0")
57mm
(2.25")
060252A
Quick Disconnect
Hose Connectors
*Suggested - Check local building code requirements on backflow protection and all installation heights.
Single and Mixing
Surgeon Scrub-Up Valves
• Forged brass, self close foot pedal valve
• Indexed pedals
• Heavy duty rigid/swivel gooseneck spout
and … with … (add control required)
with … (add outlet required)
• Above floor mount, forged brass
• Rough chrome plated finish
• Self-close foot pedal valve
• Indexed cast aluminum pedals
• Heavy duty rigid/swivel gooseneck
spout
and … with … (add spout required)
54T5832A
54T5432A
Model Specified:
Approval:
DESCRIPTION
Surgeon Scrub-up Valve
PRODUCT NO.
54T5
A
CONTROL
OUTLET
SPOUT
✔
0
1
Date:
✔
0
Single
Wallmount
Valve, Inlet Stop
Outlet Elbow
Single
Floormount
Valve
Specify ''0''
When No Spout
Required
✔
0
1
Specify ''0''
When No Outlet
Required
1
Vandal Resistant
1.5 USGPM (5.7 L/min.)
Laminar w/Antimicrobial
By AgIONTM
2
Wallmounted (R2)
Rigid/Swivel
Gooseneck Spout (1)
2
3
Deckmounted (R2)
Rigid/Swivel
Gooseneck Spout (1)
3
Vandal Resistant
Flow Control Aerator
4
4
Standard
5
5
5
6
6
6
7
7
7
8
8
9
9
2
3
4
8
Double
Wallmount
Valve, Inlet &
Outlet Stops
Double
Floormount
Valve
Rough Chrome
Plated Double
Above
Floormount Valve
9
(1) See Page 9.C.1 for Optional Rigid/Swivel Spouts. These spouts can ONLY be added to SPOUT Option No.'s 2, or 3.
(2) This outlet can ONLY be added to SPOUT Option No.'s 2, or 3.
Smooth End, Laminar Flow
Control in Base of
Gooseneck Spout
1.1 USGPM (4.2L/min.) (2)
Flowrates are at 60 PSI.
Page 8.C.3
Single and Mixing
Surgeon Scrub-Up Valves
Approvals:
• CSA certified
• Long Foot Pedal Valves No. 1, 3, and 8
ADA Compliant and Meet
Standard ASME A117.1 of
less than 5 lbs. operating force.
51mm
(2") DIA.
1/2”
NPT
502mm
(19.75”)
• IAPMO listed
71mm
(2.80”)
62mm
(2.44”)
154mm
(6.06”)
95mm
(3.75”)
Local Approvals.)
154mm
(6.06”)
92mm
(3.63”)
222mm
(8.75”)
54mm
(2.13”)
FLOW
(l/min.)
114mm
(4.50”)
70mm
(2.75")
368mm to 391mm
(14.50" to 15.38")
FLOW
(USGPM)
2.5
9
8
2
6
67mm
(2.63”)
1.5
5
4
3
1
2
.5
1
0
0
10
0
20
30
40
50
60
70
Outlets #1, 2, 3, 4
80
C
No. 2 Laminar Flow Outlet
OUTLET
NO.
2
3
4
No. 7 Flow Control
“D”
mm
18
18
17
in.
0.69
0.69
0.67
Outlet #7
L
34mm
(1.35") MAX.
49mm
(1.94")
DSP–54T5
26mm
(1.01")
19mm DIA.
(0.75") HOLE
Outlets #1, 2, 3, 4
OUTLET - 1/2” IPS
132mm
(5.19”)
34mm
(1.35") MAX.
NO. 8 CONTROL
62mm
(2.45")
3/8" NPT MALE
C
A
67mm
6mm (0.25") DIA.
HOLE FOR LUGS
19mm DIA.
(0.75") HOLE
146mm
(5.75”)
Outlet #7
A
OUTLET - 1/2” IPS
L
L
49mm
(1.94")
3/8" NPT MALE
6mm (0.25") DIA.
HOLE FOR LUGS
49mm
(1.94”)
NO. 3 SPOUT
D
68mm
(2.70”)
A
L
62mm
(2.45")
26mm
(1.01")
C
Note: It is strongly recommended that each
supply line be equipped with a hammer
arrestor installed per manufacturer’s
instructions.
❏ 060327A
1/2" NPT Water Hammer Arrestor
INLETS - 1/2” IPS
C
A
D
Spout Outlets
INLETS - 1/2” IPS
114mm 62mm
(4.50”) (2.44”)
NO. 2 SPOUT
No. 3 & 4 Aerator
OUTLET - 1/2” IPS
30mm
(1.19”)
7
48mm
(1.88")
28mm
(1.11")
25mm DIA.
(1.0") HOLE
1/2" NPS
48mm
(1.88")
44mm
(1.75") MAX.
DECK THICKNESS
28mm
(1.11")
25mm DIA.
(1.0") HOLE
1/2" NPS
44mm
(1.75") MAX.
DECK THICKNESS
114mm
(4.50")
62mm
(2.44")
INLETS - 1/2” IPS
GOOSENECK SPOUT ASSEMBLIES
See Page 9.C.1 for
additional optional
spouts.
Spout
No.
2&3
2&3
DIMENSIONS
SPOUT/OUTLET
Gooseneck-Standard (R2) for Outlet #1, 2, 3, 4
Gooseneck-Standard (R2) for Outlet #7
“A”
mm in.
114
114
4.5
4.5
“C”
mm in.
4.1
104
3.8
97
“L”
mm in.
170
6.7
178
7.0
Faucet with Third Valve Connection
• Two handle widespread lavatory faucet
with third valve foot pedal connection
• 203mm (8'') centers CAST BRASS bodies
• TUF-TECK institutional structures
• 3/8” IPS BRASS PIPE Rigid/Swivel Gooseneck Spout
• Metal hold-down package
• 102mm (4") ADA Compliant, color indexed
metal blade handles with vandal resistant screws
and …
DESCRIPTION
54T2401
Model Specified:
Approval:
Date:
PRODUCT NO.
54T2
HANDLE
4
0
OUTLET
NOT APPLICABLE
✔
0
0
✔
✔
✔
0
1
1
1
2
2
2
3
3
3
4
4
5
5
5
6
6
6
7
7
7
8
8
8
9
9
9
4
102mm (4”) Blade
Handles, Sanitary
Hoods
✔
See Page 9.C.1 for Optional Rigid/Swivel Spouts.
Vandal Resistant
By AgIONTM
Control in Base of
Gooseneck Spout
1.1 USGPM (4.2L/min.)
Page 8.C.4
Approvals:
• CSA certified
TYPICAL INSTALLATION
• Lever Blade Handles
ADA Compliant and meet
5 lbs. operating force.
FOOT PEDAL
VALVE (NOT
SUPPLIED)
• IAPMO listed
Local Approvals.)
WATER FLOW ABLE TO BE CONTROLLED ON SINK DECK AS
WELL AS BY A THIRD VALVE LOCATED ELSEWHERE.
FRONT VIEW
EXTENSION KIT AVAILABLE
FOR UP TO 1 1/4" THICK DECKS
FLOW
(l/min.)
89mm
(3.5")
FLOW
(USGPM)
2.5
9
8
97mm
(3.8")
2
7
6
1
2
.5
1
0
0
0
10
20
30
40
50
60
70
51mm
(2.0")
32mm
(1.25") MIN.
3 HOLES
1.5
5
4
3
80
Spout Outlets
OUTLET
NO.
1
203mm
(8.0")
INLET FOR 3/8" OR 1/2" FLEXIBLE RISER
OR 1/2-14 NPSM COUPLING NUT (SUPPLIED)
54T2402
54T2401
A
“D”
mm
18
27mm
(1.06") MAX.
102mm
(4.0")
FROM FOOT PEDAL
1/4-18 NPSM MALE
54T2401
102mm
(4.0")
in.
0.69
54T2402
C
C
A
D
L
35mm
(1.38")
26mm
(1.01")
44mm
(1.75")
L
35mm
(1.38")
L
26mm
(1.01")
44mm
(1.75")
Refer to www.specselect.com for individual models
DSP–54T2
See Page 9.C.1 for
additional optional
spouts.
Product
No.
54T2401
54T2402
DIMENSIONS
SPOUT/OUTLET
“A”
mm in.
114
114
4.5
4.5
“C”
mm in.
4.1
104
3.8
97
“L”
mm in.
170
6.7
178
7.0
Electronic Faucet
1500T & 1501T Series
• Battery (4 ‘C’ cell) or Hardwire (24 VAC) infrared electronic handwash system
• H2OPTICS™ technology – no external adjustments required
• Chrome plated one piece cast main body with integral sensor and rigid spout
• Adjustable sensing range and timeout
• Audible low battery indicator
• Forged brass solenoid valve (control box No. 0 only)
• Tempered water supplied to solenoid valve, (except control box options No. 0 and 1)
and...
with... (specify battery or hardwire)
with... (add spout required)
with... (add outlet required)
Model Specified:
with... (add control box required)
Approval:
with... (transformer - specify separately - See Back Page)
DESCRIPTION
Hardwire
Battery Operated
PRODUCT NO.
4
5
✔
0
2
(R5) Single Hole Deckmount
Gooseneck Spout with
Integral Sensor in Base (1)
(R5) Deckmount Gooseneck
Spout with Integral Sensor
in Base and 4" Forged
Coverplate (1)
(R5) Deckmount
Gooseneck Spout with
Integral Sensor in Base and
8" Forged Coverplate (1)
3
✔
0
1
2
3
CONTROL BOX
OUTLET
✔
1
Date:
1500T3
1501T3
SPOUT & SENSOR
0
1501T3470
1
Vandal Resistant
By AgIONTM
Vandal Resistant
3
4
5
5
6
7
7
6
Control in Base of
Gooseneck Spout
For RECESSED MOUNTING
Components & Mechanical Mixing Valve (2)
ASSEMBLED in 10" Box w/S/S Cover.
SEE Specification Drawing #11
7
8
8
8
9
9
9
* Mixing Valve supplied by others.
(1) No Optional Spouts Available.
(2) With Thermostatic Limit Stop.
Components ASSEMBLED in 10" Box
w/S/S Cover. *
2
4
6
Base Model with
Surface Mount Housing*
Components & Thermostatic Mixing Valve
Note: Use this page front and back, with specification drawing page referenced above, as product submittal sheets.
Page 8.C.5
Electronic Faucet
1500T & 1501T Series
Approvals:
• CSA certified
5 lbs. handle operating force.
• IAPMO listed
• Control Box Option 6 Mechanical Mixing
Valve CSA certified
• Control Box Option 8 Thermostatic Mixing
Valve CSA certified and meets ASSE 1016
(Contact Delta Representative for State
and/or Local Approvals.)
U.S. Patent #6, 826, 455.
with Outlet #2 and 3
GOOSENECK
SPOUT #3
Outlet Flowrates
A
D
L
L
Integral
Sensor
58mm
(2.28")
32mm (1.25")
Dia. Hole
Required
62mm
(2.46")
62mm
(2.46")
38mm
(1.5")
Max. Deck
Thickness
38mm
(1.5")
Max. Deck
Thickness
59mm
(2.31")
59mm
(2.31")
3/8" Compression
Connection
Watertight Connection
36" Long
FLOW
(USGPM)
1500T3421
Typical
Installation
2.5
9
8
C
C
A
FLOW
(l/min.)
with Outlet #7
2
Gooseneck
Spout
GOOSENECK
SPOUT
#4 & #5
7
6
1.5
5
4
1
Sensor
Coverplate
3
.5
2
1
0
38mm
(1.5")
Max. Deck
Thickness
0
0
10
20
30
40
50
60
70
80
355mm
(14") max.
Spout Outlets
No. 3 Aerator
SUPPLIED:
3/8" MIP Outlet from Box
3/8" Compression Joint at Spout
BALANCE BY OTHERS
Flexible, Sensor
Cord Conduit
3/8" Compression
Connection
Watertight Connector
36" Long
with Outlet #7
C
A
C
A
D
Inlet - 1/2" Copper
(Tempered Water
By Others)
L
L
77mm (3.0")
102mm (4")
78mm
(3.08")
OUTLET
NO.
2
3
“D”
mm
18
18
63.5mm
(2.50")
in.
0.69
0.69
78mm
(3.08")
63.5mm
(2.50")
1500T & 1501T ELECTRONIC FAUCET OPTIONAL ACCESSORIES:
“A”
mm in.
“C”
mm in.
“L”
mm in.
152
6
124
4.9
188
7.4
152
6
117
4.6
196
7.7
305mm (12")
Stainless Steel
Cover Plate
257mm (10.13")
Control Box
NOTE: For optimum performance of this product,we recommend a
system pressure between 20 and 80 PSI static. This product will
operate up to a maximum of 125 PSI static per ANSI and CSA
requirements. However, we do not recommend pressures above
80 PSI. Thermal expansion or leaking pressure reducing valves may
require use of expansion tanks or relief valves to ensure your system
never exceeds its maximum intended pressure setting.
Spout/Outlet
Gooseneck-Standard (R5)
for Outlet #2 and 3
for Outlet #7
#4 - 102mm (4.0")
#5 - 203mm (8.0")
with Outlet #2 and 3
OPERATION:
• Hands free (touchless) operation.
• Water flows when sensor is activated.
• Water flow stops upon de-activiation
of sensor.
• Auto shut-off feature that is selectable
between 15 to 75 seconds. Factory set to
45 seconds. Will reset once obstruction is
removed.
• Adjustable sensing distance 76 to 381mm
(3" to 15") factory set to 229mm (9") (+/– 1.0”)
• Low battery audible beep (for battery models
only) will activate after faucet shuts off when
approximately 1500 cycles remain.
32mm (1.25") Dia.
3 Holes Required
Watertight
Connector
No. 7 Flow Control
No. 2 Laminar Flow Outlet
Integral
Sensor
#4 - 191mm (7.5")
#5 - 282mm (11.1")
✔
TRANSFORMERS:
060704A
110 to 24VAC Class II 20VA (Up to 5 Electronic Valves)
060771A
060772A
✔
CORDS:
060690A
36" Cable Extension
Product supplied as shown by solid lines. All items shown by dotted lines supplied by others.
DSP–1500T
Specification Drawing #9
COMPONENTS ONLY UNASSEMBLED
1500T AND 1501T SERIES
✔
PRODUCT NO.
1500T
1501T
3
3
VALVE TYPE
0
0
Deckmount Handwash Hardwire
Deckmount Handwash Battery
COVER
Surface Mounted,Vandal Proof Control Housing
1500T and 1501T
SERIES
36mm
(1.43")
Battery Operated box shown.
Hardwire Version comes
complete with Watertight
Connector and Hardwire
Converter 24VAC to 6VDC.
VANDAL PROOF
SURFACE MOUNT
CONTROL HOUSING
146mm
(5.73")
Recommended
381mm (15" max.)
to top of counter
1/8" Allen Screw
139mm
(5.47")
Battery
Pack
3/8" Compression
Connection
Outlet
100mm
(3.96")
Inlet 3/8" NPT
or 3/8" Compression
Adaptor (Supplied)
Note: Stainless Steel hose connection supplied
between Solenoid Valve and Spout
89mm
(3.5") MAX.
S/S HOSE
508mm
(20")
3/8" COMPRESSION
FITTING BOTH ENDS
Page 8.C.6
TEMPERED WATER - ASSEMBLED CONTROL BOX
✔
PRODUCT NO.
FAUCET TYPE
MOUNT TYPE
COVER
*1500T
3
1 Deckmount Handwash Hardwire
Recessed Mount
305mm (12")
*1501T
3
1 Deckmount Handwash Battery
Recessed Mount
305mm (12")
*This product is supplied with Flexible Sensor Cord Conduit on Recessed Mount Installations.
1500T and 1501T
SERIES
57mm
(2.25")
127mm
(5.0")
53mm
(2.07")
70mm (2.75")
Diameter
Flexible Sensor
Cord Conduit
(Supplied on Recessed
Mount Box)
203mm
(8.0")
25mm
(1.0")
Stainless Steel
Stainless Steel
Outlet
3/8" M.I.P.
305mm
(12.0")
Stainless
Steel
Cover
257mm
(10.13")
Screwdriver Stop
Tempered Water
(By Others)
Aluminum
Control Box
Inlet: 1/2" Copper
127mm
(5.0")
25mm
(1.0")
102mm
(4.0")
254mm
(10.0")
Note: For wallhung sink installations, sensor conduit rough-in should be directly under basin to minimize sensor cord exposure.
DSP–1500TA
with Checks and
Thermostatic
Limit Stop
MECHANICAL MIXING VALVE ASSEMBLED CONTROL BOX
✔
PRODUCT NO.
FAUCET TYPE
MOUNT TYPE
COVER
*1500T
3
Recessed Mount
305mm (12")
*1501T
3
Recessed Mount
305mm (12")
Stainless Steel
Stainless Steel
1500T and 1501T
SERIES
53mm
(2.07")
70mm (2.75") Diameter
35mm
(1.38")
203mm
(8.0")
Flexible Sensor
Cord Conduit
(Supplied
on recessed
mount box)
Bracket
and
battery
holder not
required
for
hardwire
models
Driver board
to be located
on this bracket
Outlet: 3/8" M.I.P.
74mm
(2.9")
74mm
(2.9")
Outlet 3/8" M.I.P.
Inlets
1/2" Copper
305mm
(12.0")
Stainless
Steel
Cover
257mm
(10.13")
Screwdriver
Stop
102mm
(4.0")
254mm
(10.0")
Mechanical Mixing Valve
with Checks and Thermostatic Limit Stop
Page 8.C.7
THERMOSTATIC MIXING VALVE ASSEMBLED CONTROL BOX
✔
PRODUCT NO.
FAUCET TYPE
MOUNT TYPE
COVER
*1500T
3
Recessed Mount
305mm (12")
*1501T
3
Recessed Mount
305mm (12")
Stainless Steel
Stainless Steel
1500T and 1501T
SERIES
53mm
(2.07")
35mm
(1.38")
Outlet: 3/8" M.I.P.
203mm
(8.0")
Flexible Sensor
Cord Conduit
(Supplied
on recessed
mount box)
Bracket
and
battery
holder not
required
for
hardwire
models
Driver board
to be located
on this bracket
74mm
(2.9")
74mm
(2.9")
Outlet 3/8" M.I.P.
Inlets
1/2" Copper
305mm
(12.0")
Stainless
Steel
Cover
257mm
(10.13")
Screwdriver
Stop
102mm
(4.0")
Thermostatic Mixing Valve
with Checks
254mm
(10.0")
DSP–1500TB
Electronic Basin/Sink Faucet
3000T & 3001T Series Adjustable Program
• Battery (4 AA) or Hardwire (24 VAC) infrared electronic handwash system
• Chrome plated one piece cast main body with integral sensor
• Field adjustable water resistant program controller
• Backlit indicator adjustment buttons
• Controller retains adjusted settings in event of power failure
• Visible low battery indicator above deck
• Chrome plated forged brass solenoid valve with Y strainer cleanout
• Tempered water supplied to solenoid valve, (except control box options No. 0, 1 and 2)
and...
with... (specify battery or hardwire)
with... (add spout required)
with... (add outlet required)
Model Specified:
with... (add control box required)
with... (add suffix -KS if required - See Back Page)
Approval:
with... (transformer - specify separately - See Back Page)
DESCRIPTION
Hardwire
Battery Operated
PRODUCT NO.
4
5
✔
0
2
(R5) Single Hole Gooseneck
Spout with Integral
Sensor in Base (1)
(R5) Gooseneck Spout
with Integral Sensor in
Base and 4" Forged
Coverplate (1)
(R5) Gooseneck Spout
with Integral Sensor in
Base and 8" Forged
Coverplate (1)
3
6
6
7
7
8
9
* Mixing Valve supplied by others.
(1) See Page 9.C.1 for Optional Rigid/Swivel Spouts.
1
Vandal Resistant
1.5 USGPM (5.7 L/min)
by AgION™
Vandal Resistant
4
5
✔
0
1
2
3
CONTROL BOX
OUTLET
✔
1
Date:
3000T3
3001T3
SPOUT & SENSOR
0
3001T3420
2
Base Model with
Surface Mount Housing*
w/S/S Cover. *
For SURFACE MOUNTING
w/Aluminum Cover. *
3
4
Vandal Resistant
Flow Control NonAerating Spray Outlet
5
6
Control in Base of
Gooseneck Spout
8
9
7
8
9
ASSEMBLED in 10" Box w/Aluminum Cover.
ASSEMBLED in 10" Box w/Aluminum Cover.
(2) With Thermostatic Limit Stop.
Note: Use this page front and back, with specification drawing page referenced above, as product submittal sheets.
Page 8.C.8
Electronic Basin/Sink Faucet
3000T & 3001T Series Adjustable Program
Approvals:
• CSA certified
5 lbs. handle operating force.
• IAPMO listed
• Control Box Option 6 & 7 Mechanical
Mixing Valve CSA certified
• Control Box Option 8 & 9 Thermostatic
Mixing Valve CSA certified and meets
ASSE 1016 and ASSE 1017
(Contact Delta Representative for State
and/or Local Approvals.)
l/
with Outlet #2, 3, 5
GOOSENECK
SPOUT #3
L
Integral
Sensor
58mm
(2.28")
3000T3421
Typical
Installation
2
1.5
1
2
.5
1
0
Sensor
Coverplate
Add suffix “-KS” to
Product Number for
Keyed Switch
See Page 5.C.5 for
detailed specification
20
30
40
50
60
70
80
No. 5 Low Flow Outlet
No. 3 Aerator
Sensor
7 Flow ControlFlexible,
No. 2 Laminar FlowNo.
Outlet
Cord Conduit
Watertight
Connector
Spout Outlets
OPERATION:
Inlet - 1/2" Copper
(Tempered Water
By Others)
with Outlet #7
C
A
C
A
L
L
35mm (1.38")
102mm (4")
OUTLET
NO.
2
3
5
78mm
(3.08")
“D”
mm
18
18
18
in.
0.69
0.69
0.69
63.5mm
(2.50")
78mm
(3.08")
63.5mm
(2.50")
3000T & 3001T ELECTRONIC FAUCET OPTIONAL ACCESSORIES:
“C”
mm in.
“L”
mm in.
152
6
124
4.9
188
7.4
152
6
117
4.6
196
7.7
3/8" Compression
Connection
36" Long
#4 - 102mm (4.0")
#5 - 203mm (8.0")
D
“A”
mm in.
See Page 9.C.1 for additional optional spouts.
559mm (22")
MAX.
305mm (12")
Stainless Steel
Cover Plate
GOOSENECK
SPOUT
#4 & #5
32mm (1.25") Dia.
3 Holes Required
with Outlet #2, 3, 5
257mm (10.13")
Control Box
Spout/Outlet
for Outlet #2, 3, 5
for Outlet #7
SUPPLIED:
3/8" MIP Outlet from Box
3/8" Compression Joint at Spout
BALANCE BY OTHERS
(Optional Adjustments)
• Water flows when sensor is activated.
• Water flow stops at the selected run-on time
after user removes hands from sensing zone.
Run-on time selections are 0 to 8 seconds or
1 to 8 minutes for scrub-up applications.
Factory set to 8 seconds.
• Blocking time between uses has selectable
range of 0 to 8 seconds. Factory set to
0 seconds.
• Auto shut-off feature that is selectable
between 1 to 9 minutes. Factory set to
1 minute.
• Optional metered program mode with
selection of 7 to 240 seconds of continuous
operation.
• Adjustable sensing distance 76 to 305mm
(3" to 12") factory set to 229mm (9") (+/– 1.0”)
59mm
(2.31")
Integral
Sensor
#4 - 191mm (7.5")
#5 - 282mm (11.1")
38mm
(1.5")
Max. Deck
Thickness
0
10
38mm
(1.5")
Max. Deck
Thickness
59mm
(2.31")
3 POSITION SWITCH
5
4
3
62mm
(2.46")
Gooseneck
Spout
7
6
38mm
(1.5")
Max. Deck
Thickness
3/8" Compression
Connection
Watertight Connection
36" Long
2.5
8
L
62mm
(2.46")
32mm (1.25")
Dia. Hole
Required
9
0
A
D
FLOW
(USGPM)
Outlet Flowrates
C
C
A
FLOW
( min.)
with Outlet #7
✔
TRANSFORMERS:
060704A
060771A
060772A
✔
CORDS:
060520A
3 ft. Sensor Extension Cord
Product supplied as shown by solid lines. All items shown by dotted lines supplied by others.
DSP-3000T Rev. B
COMPONENTS ONLY UNASSEMBLED
3000T AND 3001T SERIES: ADJUSTABLE PROGRAM
✔
PRODUCT NO.
3000T
3001T
3
3
0
0
VALVE TYPE
3000T and 3001T
SERIES
COVER
57mm
(2.25")
VANDAL PROOF
SURFACE MOUNT
CONTROL HOUSING
146mm
(5.73")
80mm
(3.14")
Recommended
381mm (15") MAX.
to top of counter
1/8" Allen Screw
139mm
(5.47")
Solenoid Valve
With Y Strainer
100mm
(3.96")
3000T Controller
3/8" Compression Connection
Inlet And Outlet
89mm
(3.5") MAX.
203mm (8") Long
Note: Stainless Steel hose connection supplied
between Solenoid Valve and Spout
S/S HOSE
508mm
(20")
3/8" COMPRESSION
FITTING BOTH ENDS
Page 8.C.9
TEMPERED WATER - ASSEMBLED CONTROL BOX
✔
PRODUCT NO.
*3000T
3
3000T
3
3
*3001T
3001T
3
*This product is supplied with
FAUCET TYPE
MOUNT TYPE
1
Recessed Mount
2
Surface Mount
1
Recessed Mount
2
Surface Mount
Flexible Sensor Cord Conduit on Recessed Mount Installations.
COVER
305mm
254mm
305mm
254mm
(12")
(10")
(12")
(10")
Stainless Steel
Aluminum
Stainless Steel
Aluminum
3000T and 3001T
SERIES
57mm
(2.25")
127mm
(5.0")
53mm
(2.07")
203mm
(8.0")
35mm
(1.38")
Flexible Sensor Cord Conduit
(Supplied on Recessed Mount Box)
Outlet 3/8" M.I.P.
Aluminum
Control Box
Solenoid Valve
With Y Strainer
Cover
257mm
(10.13")
3000T Controller
Screwdriver Stop
Watertight
Connector
203mm (8") Long
Tempered Water
(By Others)
Inlet: 1/2" Copper
127mm
(5.0")
35mm
(1.38")
102mm
(4.0")
254mm
(10.0")
DSP–3000TA
MECHANICAL MIXING VALVE ASSEMBLED CONTROL BOX
✔
PRODUCT NO.
*3000T
3
3000T
3
3
*3001T
3001T
3
FAUCET TYPE
MOUNT TYPE
6
Recessed Mount
7
Surface Mount
6
Recessed Mount
7
Surface Mount
COVER
305mm
254mm
305mm
254mm
(12")
(10")
(12")
(10")
Stainless Steel
Aluminum
Stainless Steel
Aluminum
3000T and 3001T
SERIES
53mm
(2.07")
Flexible Sensor
Cord Conduit
(Supplied
on recessed
mount box)
127mm
(5.0")
35mm
(1.38")
Outlet: 3/8" M.I.P.
203mm
(8.0")
74mm
(2.9")
Outlet
3/8"
M.I.P.
Inlets
1/2"
Copper
74mm
(2.9")
Solenoid Valve With
Y Strainer
Cover
Mechanical
Mixing Valve
with Checks and
Thermostatic
Limit Stop
257mm
(10.13")
3000T Controller
203mm (8") Long
Screwdriver Stops with Check
25mm
(1.0")
102mm
(4.0")
254mm
(10.0")
Page 8.C.10
THERMOSTATIC MIXING VALVE ASSEMBLED CONTROL BOX
✔
PRODUCT NO.
*3000T
3
3000T
3
3
*3001T
3001T
3
FAUCET TYPE
MOUNT TYPE
8
Recessed Mount
9
Surface Mount
8
Recessed Mount
9
Surface Mount
COVER
305mm
254mm
305mm
254mm
(12")
(10")
(12")
(10")
Stainless Steel
Aluminum
Stainless Steel
Aluminum
3000T and 3001T
SERIES
53mm
(2.07")
Flexible Sensor
127mm
(5.0")
Cord Conduit
(Supplied
on recessed
mount box)
35mm
(1.38")
Outlet: 3/8" M.I.P.
203mm
(8.0")
74mm
(2.9")
Outlet
3/8”
M.I.P.
Inlets
1/2”
Copper
74mm
(2.9")
Solenoid Valve With
Y Strainer
Watertight
Connector
203mm (8”) Long
Cover
257mm
(10.13")
3000T
Controller
Thermostatic
Mixing Valve
Screwdriver Stops with Check
25mm
(1.0")
102mm
(4.0")
254mm
(10.0")
DSP–3000TB Rev. A

Concealed Wallmount Bedpan Cleansers

Transcription

Similar documents

b100-24sae - Brand Hydraulics

S kyline - Franz Viegener

The Bay Area`s Largest Selection of Fine Furniture

zyam triple outlet thermostatic shower valve

View Dr van Niekerk`s presentation

MMA-350 - Skymsen

22x28 - Waikele Premium Outlets

• Mega-Blast™ Bulk Abrasive Blasters are available in two standard