View Full Document - Industrial Machine Trader

Transcription

K.O. LEE - SEE OUR AD ON PAGE 46
WEEKLY
®
May 29, 2007
Volume 23, Issue 24
800-203-9960
The National Marketplace to Buy & Sell New and Used Industrial Machinery
See Our Auction Calendar on page 8!
Reader Service #579
The Largest
Seller of Used
CNC Machines
in the World
On Our
Floor!
On Our
Floor!
1999 Mazak
Integrex 400-Y
On Our
Floor!
1982 Waldrich
Coburg Planer
1994 Okuma &
Bridge mill
Howa Milac 40 H
Vertical Machining Centers
MAZAK FJV-20, ’97, M2, 31.5” x 18” Table
MAZAK VTC-16B, ’97, M+, 57” x 16” Table
MAZAK VTC-20B, ’97, M+, 57” x 16” Table
MAZAK VTC-200B, ’00, Fusion, 57” x 20” Table
MAZAK NEXUS 510C, ’04 , Fusion, 51” x 21” Table
MAZAK VQC-30/50A ‘85, M2, 48” x 29.5” Tbl
MAZAK SV-25E (2-Pallet) ‘92, M32, 110” x 36.6” Tbl
MAZAK MTV-815/120 ‘98, M+, 127” x 32” Tbl
AMERA-SEIKI VAS-3, ’00, Fanuc OMD, 48” x 20” Tbl
BRIDGEPORT INTERACT 412, ’88, Heid TNC151,
12” x 12” x 18”, 6k RPM, 5HP, BT40
CHIRON FZ-26/6300, ’86, Fan 10M
CHIRON STAMA MC 326/TWIN-PLUS, ’02, Fanuc
DMG DMU 70EVOLUTION (5-AXIS), ’04, Seimens
FADAL VMC 40, ’88 & ’89, CNC88, 39”x16” Table
HAAS VF-1, ’95 & ‘97, Haas, 26”x14” Table
HAAS VF-3, ’95, Haas 32 Bit, 48”x18” Table
HAAS VF-3YT, ’05, Haas 32 Bit, 54”x25” Table
HAAS VF-4 (2-Pallet), ‘00, Haas 32 Bit, 52”x18” Tbl
HAAS VF-5, ‘01, Haas 32 Bit, 52”x23” Table
HAAS VF-9, ‘97, Haas 32 Bit, 84”x36” Table
HURCO BMC-10, ‘86, Ultimax II, 39”x16.5” Table
MATSUURA MC-560V, ’87 Yas MX3, 34” x 15” Tbl
MORI SEIKI GV-503 (2-Pallet), ’01, MSG-805
MORI SEIKI VS100-50 (BRIDGE–STYLE), ’04,
Fan18iM, 88”x39” Table, 81”x40”x17.7” Trvls
OKUMA MC-4VA, ’87, OSP5000, 39”x20” Table,
26” x 16 x 18” Trvls, 20-ATC, 10HP, 4k RPM, CAT40
OKUMA CADET V4020, ’95 , OSP5020M, 47”x20”
TABLe 40” x 20 x 20” Trvls, 20-ATC, 10HP, 8k RPM
REPUBLIC-LAGUN VMC-3516, ’00, Lagunmatic2100, 43”x24” Table, 24” x 16 x 20” Trvls, 18-ATC
SUPERMAX MAX 1 REBEL, ’96, Mit 520AM,
33”x16.5” Table, 26” x 16 x 18” Trvls, 16-ATC,
10HP, 8k RPM, 40 Taper
2000 Mazak
FH-4800
1996 Methods
Slant 50C
1999 Mazak
Integrex 200-Y
Lathes
MAZAK QT-6G w/Gantry Loader, ’98 & ‘06, EIADash, 18.5"sw, 1.26" Bar, 7k RPM, 7.5HP
MAZAK QT-8, ’87, T2, 11"sw, 10”cc, 1.97" Bore
MAZAK QT-10, ’96, T+, 11.81"sw, 11”cc, 1.97" Bore
MAZAK QT-10N, ’86, T2, 17"sw, 19.69” cut Length
MAZAK QT NEXUS 100, ’02 & ’05, Fusion, 21.6"sw
MAZAK QT-15N CHUCKER, ’89, T32-2, 17"sw
MAZAK QT-15N, ’93, T32-2, 17"sw, 19.7” Cut LENgth
MAZAK QT-20HP, ’98, T+, 17"sw, 16.75” Cut Length
OKUMA & HOWA MILLAC 630H, ’00, Fan 16iM, 24.8” Pal.
MAZAK QT-25L, ’98, Fusion, 20"sw, 48” Cut Length
MAZAK M-4, ’81, T-1, 22"sw, 60” cc, 3.1” Bore
MAZAK M-5N, ’91 & ‘92, T32-2, 24"sw, 60” cc
MAZAK M-5N, ’94, T+, 24"sw, 60” cc, 6.5” Bore
MAZAK SLANT TURN 50, ’88, T2, 31.7"sw, 120” cc
TOSHIBA BMC-800E, ’97, Tos 888, 31.5” Pal.
MAZAK QT-250, ’99, Fusion, 23.6"sw, 19.7” Cut Length
MAZAK DUALTURN 20, ’96, T+, 12.6"sw, 5.91” Length
888-786-2200
We are a full stocking dealership with the finest
sales, service, financing and support in the industry.
Go to our website to view our full inventory and see
what Premier can do for you.
www.premierequipment.com
Buy with
confidence.
Trust your
machinery
purchases to a
select Machinery
Warranty dealer.
MAZAK SQT-15MS, ’95, T+, 20"sw, 2" Bar, 5k RPM
MAZAK SQT-200MS, ’98 , Fusion, 20"sw, 2" Bar
MAZAK SQT-250MY, ’99, Fusion, 20"sw, 20”cC
MAZAK SQT-28MS, ’96, T+, 22"sw, 40” Z,3.46" Bar
MAZAK INTEGREX 300-Y, ’00, Fusion, 24”sw, 60”cc
MAZAK INTEGREX E-410H, ’02, Fusion Pro, 24”sw
MAZAK MULTIPLEX 430, ‘97, T+, 22”sw, 3.46” Bore
MAZAK MULTIPLEX 620N, ‘93, T-32-6, 15.4”sw
MAZAK MULTIPLEX 6200 w/Robot, ‘99, Fusion,
12.5”sw, 46” Btwn Spindles, 2” Bar, (2)12 PosTrts
MAZAK MULTIPLEX 6200Y, ‘98, Fusion, 12.5”sw
DAEWOO LYNX 200B CHUCKER, ’00, Fan 21TB
DAEWOO PUMA 350A, ’99, M520L, 28”sw, 44”cc
ECOCA SJ-43, ’02, Fanuc 18T, 23”sw, 25”cc, 5.125” Bar
EUROTURN SAY 6/32-M MULTI-SPINDLE SCREW
MACHINE, ’98, Parker Control
HAAS SL-30, ’05, Haas CNC, 30”sw, 34” Cut Length
HAAS TL-15, ’02, Haas CNC, 23”sw, 17.5” Cut Length
HANKOOK PROTEC 7NB, ’03, Fanuc 21iT, 29.5”sw
On Our
Floor!
On Our
Floor!
On Our
Floor!
1986 Mazak
SV-12
2000 Mori Seiki
MH-1003
1988 Mazak
QT-25
Horizontal Machining Centers
On Our
Floor!
2005 Mitsubishi
FA10S CNC
Wire EDM
On Our
Floor!
MAZAK HTC-400, ’97, M+, 15.7” Pal., 22"x20"x20"
MAZAK H-400N, ’92, M32, 15.7” Pal., 22"x20"x20"
MAZAK FH-4800 FMS, ’02, Fusion, 15.7” Pal.
MAZAK H-500/40 (6-Pallet), ‘90, M32, 19.7” Pal.
MAZAK FH-580/40 FMS, ‘96, M+, 19.7” Pal.
MAZAK H-800, ‘90, M32, 31.5” Pal., 49” x 39” x 33.5”
KITAMURA HX-400, ’00, Fan 16i, 15.75” Pal.
LEBLOND-MAKINO A77, ’97, Fan 16, 24.8” Pal.
MITSUBISHI M-H50C, ’88, M-NapII, 19.7” Pal.
MORI SEIKI SH-500, ’99, Fan16M, 19.7” Pal.
On Our
Floor!
Go To
On Our
Floor!
On Our
Floor!
On Our
Floor!
1998 Haas
SL-20
1996 Mazak
FH-480
1991 Kitamura
Mycenter 1
1999 Mazak
QT-250HP
www.premierequipment.com To See The Most Updated and Advanced Web site In The Business
Two Locations:
Charlotte, NC
Chicago, IL
(803)548-8000
www.championmachinery.com
1
9
9
7
1
9
9
8
CNC TURNING CENTERS
MORi SEIKI Frontier l-II
Fanuc 21T, 2.7" Bar, 10" Chk, 20HP, 3500 RPM, 10
Tools, APC, BF Int, Tail, Tool Presetter, Chip
1
9
9
9
Mori seiki sl-250BSMC
Fanuc 18T, 2.8" Bar, 10" Chk, 25HP, 3500 RPM, 10
Tools, Milling, Tool Presetter, APC
1
9
9
7
Mazak QT-20
T-Plus, 2" Bar, 8" Chk, 12 Tools, 5000 RPM, 20HP, Chip,
Tool Eye, Tail
1
9
9
4
Mori seiki sl-35b/750
Fanuc 15TF, 3.5" Bar, 12" Chk, 40HP, 2500 RPM, 10
Tools, Tail, Chip, Box Ways
MOri seiki cl-20b, 1996, Fanuc 18T, 2.56" bar, 8" Chk, 15HP, 3500 RPM, 8 Tools, Chucker
MORI SEIKI CL-203BM, 1999, Mit, 2.5" Bar, 8" Chk, 3500 RPM, 12 Tools, 20HP, Milling, Chip, Chucker, (3) Live Tools
MORI SEIKI CL-2000BT, 2002, Mit, 2.5" Bar, 8" Chk, 3500 RPM, 10 Tools, 15HP, Tail, Tool Setter, Chip
MORI SEIKI DL-150Y, 1998, Fanuc 18TT, 1.77" Bar, (2) 6" Chks, (2) 12 Tools, 5000 RPM, 10HP, Y-Axis Milling, APC, Chip, Collets, (10) Live Holders
MORI SEIKI SL-15, 1992, Fanuc 16T, 1.5" Bar, 6" Chk, 6000 RPM, 12 Tools, 10HP, Chip, Hi Coolant
MORI SEIKI SL-25B/500, 1997, Yasnac, 2.75" Bar, 10" Chk, 20HP, 3500 RPM, 10 Tools, LNS QL BF, APC, Chip, Tool Setter, Tail
MORI SEIKI SL-6A, 1982, Yasnac 2000GII, 3.5" Bar, 15" Chk, 35" Swing, 31" Length, 50HP, 12 Tools, 1010 RPM, CRT, Tail
MORI SEIKI SL-154SY, 2000, MIT 64, 1.77" Bar, 6" Chk, 10HP, 5000 RPM, 12 Tools, Y-Axis Milling, Sub Spindle, Tool Setter, APC, (8) Live Holders
MORI SEIKI SL-200MC, 1998, Fanuc 18iTA, 2.5" Bar, 8" Chk, 4000 RPM, 15HP, 12 Tools, Chip, Tool Presetter, BF Int, (3) Live Holders
MOri seiki sl-250bmc/500, 2000, Fanuc 18iTA, 2.9" Bar, 10" Chk, 10 Tools, 25HP, 3500 RPM, Milling, Tail, Chip, Tool Setter, (2) Live Holders
MORI SEIKI ZL-250B/500, 1999, Fanuc 18 T, 2.9" Bar, 10" Chk, 12+8 Tools, 25HP, 3500 RPM, Tail, Four Axis, Tool Setter, Chip
MORI SEIKI ZT-1000Y, 2005, Fanuc, 18iT, 1.5" Bar, 6" Chk, 12+12 Tools, 15HP, 6000 RPM, 4-Axis, Y-Axis Milling, Sub Spindle, Collets, APC, Chip
MAZAK QT-8, 1987, T-2, 1.57" Bar, 6" Chk, 4500 RPM, 10HP, 8 Tools, Collet, Tail, Tool Eye
MAZAK QT-18N, 1990, T32-2, 2.75" Bar, 10" Chk, 20HP, 3600 RPM, 8 Tools, Chip, Tool Eye, Tail
MAZAK M-4x60", 1982, t-1, 2.75" Bar, 12" Chk, 60" Length, 25HP, 2200 RPM, 8+6 Tools, Chip, Steady
MAZAK M-5x60", 1981, Fanuc 6TB, 3.5" Bar, 24" Swing, 60" Length, 30HP, 2200 RPM, 8+6 Tools, Tail, Chip, (2) Avail
MAZAK QT-30N, 1990, T-32, 2.75" Bar, 12" Chk, 38" Length, 30HP, 3300 RPM, 8D/16P Turret, Tool Eye, Tail, Chip
MAZAK QT-35N, 1995, T32-2, 2.75" Bar, 12" Chk, 40HP, 3000 RPM, 12 Tools, Chip, Tool Eye, Chucker
MAZAK SQT-18MY MARK II, 1998, T-Plus, 2.5" Bar, 10" Chk, 12 Tools, 4000 RPM, 25HP, Y-Axis Milling, EIA/ISO, Tool Eye, Chip, Tail
MAZAK DUAL TURN 20, 1996, T-Plus, 2" bar, (2) 8" Chks, (2) 12 Tools, 4750 RPM, 20HP, Load/Unload Hands, Tool Eyes, Chip, Collets
MAZAK INTEGREX 400Y, 2000, Fusion, 3" Bar, 15" Chk, 24" Max Dia, 40" Length, 40 Tools, 40HP, 3000 RPM, C&Y Axis Milling, Chip
CITIZEN L(5)20VII, 2000, Mit 635LC, 0.812" Bar, 16 Tools, 6 OD/4 Live/3 EW/3 BW, 10000 RPM, 5HP, 1 Degree, CAV 20L 12 ft. Mag BF
CITIZEN M-32, 2001, Mit 635LC, 1.25" Bar, 30 Tools, 7200 RPM, 22 Tools, 10 Tool Turret, Gang 5 OD/4 Live/3 BW, Iemca 12 ft. Mag BF
DAEWOO LYNX 200B, 2001, Fanuc 21TB, 2" Bar, 8" Chk, 5000 RPM, 15HP, 12 Tools, Tool Setter, Chip, Chucker
DAEWOO LYNX 210LC, 2002, Fanuc OiT, 2.5" Bar, 8" Chk, 4500 RPM, 12 Tools, 15HP, Tool Setter, Chip, Tail, (2) Avail
DAEWOO PUMA 240B, 2004, Fanuc OT, 2.5" Bar, 8" Chk, 4500 RPM, 12 Tools, 25HP, Tool Setter, Chip, Tail
DAEWOO PUMA 240MB, 2004, Fanuc OT, 2.5" Bar, 8" Chk, 4500 RPM, 12 Tools, 25HP, Milling, APC, Exit Conveyor, Tool Setter, Chip, (3) Live Tools
DOOSAN V420T CNC VTL, 2000, Fanuc 18T, (2) 15" Chks, 16.54" Max Dia, (2) 12 Tools, 30HP, 2500 RPM, Auto Door, (2) Chips
FORTUNE V-TURN 26, 1996, Fanuc OT, 2.95" Bar, 10" Chk, 15" Max Dia, 24" Length, 20HP, 3500 RPM, 10 Tools, Tail, Box Ways
HITACHI SEIKI Hi-CELL 23, 1996, Seicos LIII, 2.5" Bar, 10" Chk, 3600 RPM, 10 Tools, 15HP, 12 Tool ATC, Y-Axis Milling, Iemca BF, APC, Chip
Hyundai hit-18S, 2001, Siemens 840C, 2.75" Bar, 10" Chk, 20HP, 3600 RPM, 8 Tools, lemca VIP 80 BF, APC, Chip, Tail, Tool Eye
JOHNFORD SL-500, 2003, Fanuc OiTB, 3" Bar, 12" Chk, 31" Length, 22" Swing, 25 HP, 2400 RPM, 12 Tools, Tail, Chip, Box Ways
MIYANO LZ-02R, 2002, Fanuc 21T, 8" Chk, 4" Max Dia, 3.1" Length, 15HP, 4000 RPM, 10 Tools, Auto Loader, Milling
NAKAMURA TW-20MM, 1996, Fanuc 16TT, 2.5" Bar, (2) 8" Chks, (2) 12 Tools, 4500 RPM, 20HP, Twin Spindles & Twin Turrets
OKUMA CADET HS, 1995, OSP 5020, 1.63" Bar, 6" Chk, 7000 RPM, 12 Tools, 10HP, IGF, Tool Setter, Chip, Collet, Chucker
OKUMA CROWN SBB, 1998, OSP 700, 2.75" Bar, 10" Chk, 20HP, 3500 RPM, 12 Tools, IGF, Chip, Tail
OKUMA LB-35IIM/1500, 1997, OSP 7000, 3" Bar, 12" Chk, 60" Length, 18" Max Dia, 40HP, 3200 RPM, 12 Tools, Milling, Tail, Chip
OKUMA LU-300M/600, 2003, OSP-E100L, 2" Bar, 8" Chk, 13.4" Max Dia, 24" Length, 30HP, 4500 RPM, 12+8 Tools, Milling, Four-Axis, Iemca BF, APC
TAKISAWA EX-108, 2005, Fanuc 21iT, 2" Bar, 8" Chk, 4000 RPM, 12 Tools, 15HP, Tail, BF Int
TSUGAMI BS-26CII Swiss, 2000, Fanuc 18iTA, 1" Bar, 7OD/3Cross Live/2 ID/6EW/8BW/2 Back Live, 8000 RPM, 5HP, 5 Degrees, Sub Spindle
VIPER VT-40A, 2005, Fanuc OTC, 4.5" Bar, 18" Chk, 32" Max Dia, 38" Length, 60HP, 2100 RPM, 12 Tools, Chip, Tail, Box Ways, Geared Head
hardinge conquest t-42
Fanuc 18T, 1.63" Bar, 6" Chk, 5000 RPM, 12 Tools,
17.5HP, Milling, Sub Spindle, Harmatic BF
1
9
9
4
MORI SEIKI SL-25B/1000
Fanuc MF-T6, 2.75" Bar, 10" Chk, 40" Length,
20HP, 3500 RPM, 10 Tools, Tail, Chip, Box Ways
2
0
0
0
kitamura myc-2xi SP
SparkChanger 2PC, Fanuc 16iM, 20.14.18", 15000
RPM, 15HP, 24 Tools, Cat 40, CTS Prep, Chip
2
0
0
4
OKUMA LB-200MY
VERTICAL MACHINING CENTERS
MORI SEIKI MV-JR, 1986, Fanuc 10M, 22.16.18", 6000 RPM, 30 Tools, 7.5HP, Cat 40, Fourth Axis
MORI SEIKI MV-40B, 1990, Yasnac MX3, 31.16.20", 8000 RPM, Cat 40, 10HP, 20 Tools, Rigid Tap, 4th Axis Int
MORI SEIKI MV-40B+2APC, 1991, Fanuc OM, 31.16.20", 10000 RPM, 30 Tools, 10 HP, Cat 40, 2APC, (2) Chip, Rigid Tap, Box Ways
2
MORI SEIKI MV-55/50, 1985, Yasnac MX2, 40.22.22", BT50, 15HP, 3500 RPM, 24 Tools, Conv. Prog. Box Ways
0
MORI SEIKI NV-5000A/40, 2004, Fanuc 18iMB, 31.20.20", 12000 RPM, Cat 40, 30HP, 30 Tools, CTS 1000 psi, Probe, Chip
MORI SEIKI SV-500B/50, 1998, Fanuc 18iMA, 40.20.20", Cat 50, 6000 RPM, 40 Tools, 30HP, 12" Fourth Axis, Dual Chips
0
MAZAK AJV 32/405, 1989, M32, 40.27.18", Cat 50, 30 Tools, 3150 RPM, 25HP, ATLM, Rigid Tap
5
MAZAK AJV 60/160, 1993, M-32A, 157.55.23", 5000 RPM, 30 Tools, Cat 50, 35HP, Chip
MAZAK VTC-200B, 2000, Fusion 44.20.20", 10000 RPM, 24 Tools Side Mount, 20HP, Cat 40, CTS, ATLM, Chip
DAEWOO PUMA 240MSB
BROTHER TC-32A, 2001, CNC-A00, 18.13.16", 12000 RPM, 26 Tools, 10HP, HSK 40, CTS 1000 psi, 2APC, Probe, (20) Holders, (2) Avail
Fanuc 18i-TB, 2.56" Bar, 8.25" Chk, 25HP, 5000 RPM, FADAL VMC 4020, 1996, 88HS, 40.20.20", 10000 RPM, 15HP, 21 Tools, 4th Int, Rigid Tap, (2) Avail.
12 Tools All Live, Milling, APC, Exit Conveyor, SMW BF FADAL VMC 6030, 1990, CNC 88HS, 60.30.30", 10000 RPM, 21 Tools, 20HP, Full Enclosure
HAAS VF-4, 1997, 50.20.25", 7500 RPM, 20 Tools, Cat 40, 20HP, 4th Int, Prog Coolant, Rigid Tap
HWACHEON SIRIUS-II+2APC, 1998, Fanuc OMC, 22.16.18", 8000 RPM, 10 HP, Cat or BT40, 30 Tool Side Mount, 2APC, Box Ways
1
VIPER V2100AG, 2003, Mit 530M, 81.41.32", Cat 50, 3800 RPM, 25 HP, 30 Tool Side Mount, Box Ways, Geared Head, Full Enclosure
9
9
9
OSP-E100L, 1.75" Bar, 8" Chk, 15HP, 6000 RPM,
12 Live Tools, APC, C&Y-Axis Milling, Chip
1
9
9
9
1
9
9
2
MATSUURA RA-1F
Yasnac i80, 20.16.18", 8000 RPM, 10HP, 20 Tools,
BT40, 2APC
1
9
9
9
HORIZONTAL MACHINING CENTERS
MORI SEIKI MH-400, 1999, Fanuc 16M, 15.7" Plt, 22.20.20", 60 Tools, 7000 RPM, 1 Deg, 15HP, Cat 40, CTS 1000 psi, Chip
MORI SEIKI NH-4000, 2003, Fanuc 18iMA, 15.7" Plt, 22.22.25", 14000 RPM, 60 Tools, 25HP, 1 Deg, Cat 40, CTS, Chip, Data Server
MORI SEIKI NH-5000/50, 2003, Fanuc 18iM, 19.7" Plt, 26.24.29", Cat 50, 15000 RPM, 60 Tools, 1 Deg, 30HP, CTS 1000 psi, Chip, Probe
MAZAK H-400N, 1994, M-32A, 15.7" Plt, 22.20.22", 10000 RPM, 30 Tools, 1 Degree, 15HP, Cat 40, CTS, Chip, ATLM
MAZAK FH-480, 1997, M-Plus, 15.7" Plt, 22.22.20", 12000 RPM, 60 Tools, 1 Deg, 30HP, Cat 40, CTS, Chip, ATLM
MAZAK h-500/50+6APC
MAZAK FH-580/40, 1998, M-Plus, 19.7" Plt, 28.24.26", 90 Tools, 1 Deg, 30HP, 12000 RPM, CTS, Chip, ATLM
M-32A, 19.7" Plt, 4th Axis, 5000 RPM, 120 Tools,
CINCINNATI Magnum 800+6APC, 1997, Acramatic 950, (6) 31.4" Plts, 51.43.44", 90 Tools, Cat 50, 6500 RPM, 1 Degree, 6APC, CTS, Chip
Cat 50, 20HP, CTS, Reinshaw Probe, ATLM, Rigid Tap
Daewoo dhc-400, 2004, Fanuc 21iMB, 15.7" PIt, 24.22.22", 10000 RPM, 1 Deg, 40 Tools, 25HP, CTS, Chip
Daewoo dmh-400, 1999, Fanuc 16im, 15.7" Plt, 24.22.22", 60 Tools, 1 Degree, 12000 RPM, 25HP, CTS 230
KIA HX-630, 2005, Fanuc 18iMB, 24" Plt, 41.34.34", 60 Tools, 1 Deg, Cat 50, 8000 RPM, 30 HP, CTS 1000 psi, Chip, Big Plus Spindle
1
KITAMURA H-400, 1996, Fanuc 15M, 15.7" Plt, 24.20.20", 100 Tools, 4th Axis, 20HP, 10000 RPM, BT40, CTS, Chip
9
MAKINO A-51, 2002, Pro 3, 15.7" Plt, 22.22.24", 1 Degree, 60 Tools, 12000 RPM, 25HP, Cat 40 CTS, Probe, ATLM, 2075 Cutting Hrs
OKUMA MX-60HB, 2000, OSP 7000M, 24.8" Plt, 39.31.32", 4th Axis, 100 Tools, 27HP, 5000 RPM, Cat 50, CTS, Chip
9
Toyoda FA-550II, 1997, Fanuc 15MB, 21.6" Plt, 30.30.24", 4th Axis, 60 Tools, Cat 50, 14000 RPM, 30HP, CTS 220 psi, Chip
9
Union CBFK-150 HBM, 2006, Fanuc 16MA, 79 x 63" Table, 98.79.59", 1 Deg, 80 Tools, 77HP, Cat 50, 2500 RPM, Box Ways, Warranty
Hitachi seiki hicell 23ii
[email protected]
Seicos Lambda 10L, 2.5" Bar, 10" Chk,
3600 RPM, 10 Tools, LNS BF, APC, Chip
We Buy Surplus CNC and Trade-Ins!
HITACHI SEIKI HG-500II
Seicos Sigma 10M, 19.7" Plt, 30.28.26", 1 Deg,
6000 RPM, 60 Tools, 25HP, Cat 50, CTS Prep
1
9
9
7
OKUMA ACT 2SP-35HL
Fanuc 18T, (2) 12" Chks, 15" Max Dia, (2) 12 Tools,
25HP, 3500 RPM, Twin Spindles and Twin Turrets,
Chip, Box Ways
1
9
9
4
1
9
9
1
1
9
9
0
daewoo puma 200C
Johnford tc-35
makino a-55
Fanuc 18T, 2.56" Bar, 8.25" Chk, 20 HP,
4500 RPM, 12 Tools, Tail, Tool Presetter
Fanuc OT, 2.95" Bar, 10" Chk, 13.7" Max Dia,
31.9" Length, 20HP, 3500 RPM, 12 Tools, Chip
Fanuc OM, 15.75" Plt, 22.22.22", 12000 RPM,
30HP, 40 Tools, 1 Deg, CTS 300 psi, Chip
M-32A, 41.22.22", 3500 RPM, 35HP, Cat 50,
30 Tools, Probe Prep, Tecnara 4th Axis
1
9
9
8
MAZAK V-550A
1
9
8
6
Mori seiki SL-2H
Fanuc 11TE, 2.5" Bar, 10" Chk, 20HP,
2500 RPM, 10 Tools, Air Chk, Chip, Box Ways
May 29, 2007 • INDUSTRIAL MACHINE TRADER • 800-203-9960
Morris Rezman Machinery Co., Inc.
1340 W. Randolph St., Chicago, Illinois 60607
Phone: 312-829-2510 Fax: 312-829-1281
Web: www.mrezman.com Email: [email protected]
R
ASSOCIATION OF
MACHINERY AND
EQUIPMENT APPRAISERS
Appraisers on Staff
MACHINERY DEALERS
NATIoNAL ASSoCIATIoN
FADAL Mdl. 15-XT Vertical Machining
Center, FADAL 88 HS Cont., 30" X, 16"
Y, 20" Z, CAT 40 Taper, 7500 RPM, 1996
$29
$39
kitamura mycenter 3x vmc, fanuc
om cont, 27.5" X, 17.9" Y, 18.1" z, no.
40 tpr, 20 atc, coolant, 1993
FADAL VMC-6030, Fadal CNC 88 Cont.,
62.5" x 30" Tbl., 60"X, 30"Y, 30"Z,
10,000 RPM, 21 ATC, 1993
automatics
1-5/8" NAT. ACME, RB8, (6) Cross Sl. Chip
Conv., 1956......................................$19,500
2" NAT. ACME RB6, 5 Cross Sl., Thrdg in 3rd,
Ream in 5th, Coolant, 1957.................... $12,500
automatics - swiss
ENGINE LATHES
machining centers - vert
22" x 120" Cincinnati, Model 22", w/(4)
Jaw Chuck & Steady Rest, 1966........$8,450
OKK Mdl. PCV 40II Vertical Machining Center,
30" x 150" SUMMIT, Mdl 30-4, 21" 3-JAW
CHK. 4-Way Tool Post, Inch/Metric Thrdg.,
Steady, 1968.....................................$29,500
20 ATC, Rigid Tap, Renshaw Probe,
Lathes, NC/CNC
Tornos Deco20A, Sliding Headstock,
O
R
P
.
20 MM Bar, 8" length, 10,000 RPM,
Daewoo Puma 8-2SP Chucking Lathe,
Fanuc 15T CNC Cont., Conveyor, (2)
10 Tool, 1999....................................$69,500
Horizontal Boring bars
4" FORGES DE GILLY Mdl. AF 100 Tbl.
Type, 26" FH, 2 Axi DRO, Built in 51" X 43"
ROT. Tbl............................................$24,500
press brakes
135 Ton x 10' Diacro Model HM135-10,
Hyd, 3" Stroke, 12" SH., DRC CNC Cont.,
Stroke Counter/Cont., Full Elec., 1970..........
.........................................................$14,500
135 Ton x 12' Chicago Dreis & Krump,
Model 410-D, Air Clutch, Light Curtain,
Hurco Autobend 6 BG, 1963............$14,500
225 Ton x 12' Dries & Krump (Chicago),
Mdl. 510D, 12' OA, 10' 6" BH, F.O.P.B.G.,
1980..................................................$19,500
Cylindrical Grinders
Kellenberger Mdl. R175X1500......... $44,500
grinders, internal
HEALD Mdl. 273A, 12" Ext. Base, 5 HP, 3 Phase,
60 Cycle, 10" Mag. Chk., 11,000 RPM, 1965..... ............................................................... $12,500
ENGINE LATHES
11" x 18" HARDINGE HLV-H, Inch & Metric,
3000 RPM, Collet Closer 1980...........$8,450
19" x 120" Summit, Mdl 19-4, Inch/Metric
Thrdg., 12" 3 Jaw.............................$12,500
22" x 100" Kingston Model HL2500 Gap
Bed Lathe, 14" 4 Jaw Chk., Hardways,
Steady..............................................$12,500
Phone: 312-829-2510
Page ,500
,500
,500
$27
8" Chks, (2) 10-Sta. Trrts, 1997.........$32,500
22" X, 16" y, 16" Z, Fanuc IM CNC Cont.,
14,000 RPM, 1998............................$49,500
TREE Mdl.VMC-750, PC-2100 CNC Cntl,
Serial Port, Coolant Tank&Pump, 1996.........
.........................................................$14,500
YANG Mdl. EAGLE 600, Fanuc 0MD Cont.,
24"X, 10.5"Y, 20.5"Z, BT40, 6000 RPM,
1999..................................................$14,950
mills, vertical, cnc
daewoo puma 10, FANUC 10T Cont.,
12 Sta. Tool Holder, 3 J. Chk............$17,500
Hitachi Seiki HiTec-Turn 20 SII, Seiki
Multi CNC Cont. w/CRT, 10 Pos. Trrt., Tail,
RS232 Serial Port, Chip Conv, 1992$17,500
Hitachi seiki HiTec-Turn 20 SII, 2 Axis,
15 HP, 6,000 RPM, 10" Chk., Sub Spindle,
Conv., 2 Turrets, 1991......................$19,500
Hitachi Seiki 4NE-600, Fanuc 6T, Cont.,
20" Sw., 10" Chk, 24" Ctrs, Program.
Tailstock, (12) Tool Holders...............$11,500
Yam Mdl. CNC-1000 Lathe, 12" Hyd Chk,
Tailstock, Fanuc 6T Cont., 4000 RPM,
1982 ................................................$14,500
machining centers - vert
BRIDGEPORT VMC 800/22 Heavy Duty, Bed
Type, 39.4" X19.3" Tbl., 31.5" X, 20.1" Y,
10.7" Z, Heidenhain TNC 370 CNC Cont.
w/Screen, 22 Sta. ATC, Rigid Tapping,
BRIDGEPORT Series 1, Prototrak-M2 CNC,
9" x 48" Tbl., 1980............................$12,500
punch presses
30 Ton BRUDERER High Speed Press,
Mdl. BSTA25, 4 Post w/Feed, 2" Str.,
800 SPM...........................................$39,500
25 Ton brudereR hyd. Press,
Mdl. BSTA-22-E, 4 Post, 1-1/2" Str.,
20/1800 SPM, 1986..........................$29,500
thread rollers
3/16" Hartford, Mdl. 0-400.............. P.O.R.
5/16" Warren, High Speed Slotter,
Mdl. WS1000 (2)................................. P.O.R.
routers, cnc
Komo Innova Model 408, Fanuc 210 Cont.,
48" x 96" Tbl., 18,000 RPM, 1,000 IPM,
8 Sta......................................................$55,000
band saws
1996..................................................$19,500
MIGHTY COMET Mdl.VMC-850P, 24"X, 20"
Y, 20"Z, 10HP, 6,000 RPM, 20 ATC,
40 CAT Tpr., Mitsubishi M520, CNC Cont.
1999..................................................$19,500
MIGHTY COMET Mdl.VMC-1000G,
Mitsubishi M320 Cont., 41"X, 21"Y, 21"Z,
20"x50" Tbl., BT-40, 20 ATC, Coolant, Rigid
Tapping, 1994...................................$17,500
MITSUI SEIKI Mdl. VR3A, Vertical Machining
Center, 24"X, 18"Y, 18"Z, Fanuc 6M Cont.,
Cat 40 Tooling..................................$19,500
Fax: 312-829-1281
12" x 12" Do All, Horiz., Mdl. C260A, Table,
1989....................................................$8,950
25" x 36" W.F. Wells, Mdl. B-25-2 Horiz.,
1-1/4" x 19'8" Blade, Taper..................$28,950
shears
6' x 1/4" CINCINNATI, Mdl. 1406........$14,500
12' x 1/4" CINCINNATI, Mdl. 1812,
F.O.P.B.G., Sq. Arm..............................$27,500
wire machinery - forming
#33 U.S. Baird Multislide®, DH, Air Cl., 1967
$24,500
Web: www.mrezman.com
Email: [email protected]
www.industrialmachinetrader.com
11926 OAK CREEK
PKWY
HUNTLEY, IL 60142
www.usedcnc.com
PH: 847-669-9780
FAX: 847-669-9781
E-mail: [email protected]
AUTOMATICS & CNC SWISS TYPE
5/8", STAR, SR16, Fanuc, 1995, 3 drill, 3 back drill, 6 turning
1", TSUGAMI, S26D, FANUC, 1996, 3r0t, 50d, sub spdl, chip, smw omni bar feed
1", Tsugami, BS26II, 18it, 1999, 4ROT, 60D, Sub SDl, Chip, Iemca magazine bar feed
CNC Lathes Combination
1996
MAZAK SQT28MS, 1996, Milling Subspindle
daewoo, puma 300c, 21it, 2005, 12"ck, 4.5"BORe, 23"sw, 28"bc, 2800rpm, 12trt, chip
daewoo, puma 300l, 21it, 2006, 12"ck, 4.5"bore, 23"sw, 52"bc, 2800rpm, 12trt, chip
Dianichi, f-30/1250, 21it, 1999, 12" ck, 3.6 bore, 22" sw, 50" bc, 3000 rpm, 12 trt, chip
hardinge, conquest sp, 0tc, 1992, 8" ck.2.2"Bore, 19.5" SW, 5000 rpm, 12 trt,
c-axis, 4000 rpm, rotary, 1.5hp rotary, 9 heads, barfeed
1999
hyundai, hit460, 18t, 2001, 18"ck, 5.2" bore, 34"SW, 63"bc, 2000rpm, 12trt, eye, chip
L&S, profiturn50, otc, 12.5" bore, 40" sw, 50hp, 32" ck, chip*
mazak, integrex 200iisy, 640t, 2003, 8" / 8" ck, 2.4" bore, 26" sw, 45" btwn spdl
DIANICHI, F-30/1250, 21iT, 1999, 12" Ck, 3.6" Bore,
c-axis, 5000 / 5000rpm, y-axis, 6000rpm, 15hp rotary, 40atc, chip
22" sw, 50" BC, 3000 rpm, 12 trt, chip
mazak, integrex e-500h, pro, 2005, 18"ck, 4"bore, 32"Sw, 120"bc, 1600rpm, 40hp,
.001 c-axis, y-16.9", b -30 +210, 10,000rpm rotary, 50hp rotary, loaded
mazak, integrex 50y/2500, mplus, 1996, 15" ck, 28" sw, 100" bc, 2200 rpm, 60 atc,
.001 c-axis, Y-Axis, 6000rpm rotary, 20hp rotary, steady, chip
mazak, multiplex 430n, t-plus, 1997, (2) 12" Cks, 3.5" bore, (2) 12trt, 3500rpm, chip
MAZAK, m5/1500, 1983, 6tb, 24" x 60", 12" ck, Chip
MAZAK, m5/1500, 1991, T32-2, 24" x 60", 12" ck, Chip
mazak, qt250, 640t, 2001, 8"ck, 2.4"bore, 23"sw, 20"bc, 5000rpm, 12trt, 20hp, tool eye
mazak, qt20hp, mplus, 1996, 10" ck, 3" bore, 17" sw, 20" BC, 4500 rpm, 8trt, tool eye, chip
2000
MAZAK, sqt15ms, tplus, 1996, 8"ck, b.f., 5000rpm, chip, t/e, live tools, live & s
Mazak, sqt28ms, tplus, 1996, 10"ck, gl300 gantry, 40"cc, t'e, chip, live & Sub
Mori seiki, rl-253, msg803, 1999, (2) 10" chks, 2.7" bar, (2) 3500 rpm, (2) 12 trt, chip
MORI SEIKI, Shicell-250, 18t, 2002, 10"/6"ck, 4000/5000rpm, .001deg c-axis,
25/25hp/8000 rpm rotary, b-axis .001, y-axis +-3", apc, chip, barfeed
19199999
mori seiki, sl4, lx-1, 1984, 11"ck, 3.1"bore, 25"sw, 30"BC, 3000rpm, 10trt, 30hp, chip
Mazak VTC200B, 2000, 640M, 44", 20", 20", mori seiki, SL-250AMC, 18T, 1997, 10"CK, 2.9"BORE, 26"SW, 23"BC, 4000RPM, 10TRT,
10,000 RPM, 30 ATC, 28 HP, RT, ATLM, CHIP
C-AXIS, 3000RPM ROTARY, 6.5HP ROTARY, APC, TOOL EYE, CHIP
mori seiki, zl250b/600, 1999,
mori seiki, SL-253bmc, msg501, 2001, 10" ck, 3.4" bore, 26"sw, 23"bc, 3500 rpm,
10trt, c-axis, 3000 rpm rotary, 6.5HP Rotary, tool eye, chip
mori seiki, zl250b/600, 16t, 1999, 10"ck, 3.4bore,3500rpm,10/8trt, presetter, chip
mori seiki, zl253bsmc/600, 18tt, 2003, 10/8cks, 3.4" bore, 3500/6000 rpm, 10/8trt, c-axis
main/sub, 3000 rpm rotary, 6.3hp rotary, apc, eye, loaded
Okuma, LH35N/3000, 5000L, 1985, 15" Ck, 4" bore, 24" sw, 118"bc, 2200rpm, 4/6trt, steady
W&S, 2Sc18, 15T, 1993, 18" ck, 5" bore, 24" sw, 20" bc, 1015rpm, 12trt,50hp, chip, (2)
Wasino, lj6mc, otc, 1994, 10" ck, 3.3" bore, 16" sw, 24" bc, 3500 rpm, 12trt,
c-axis .001", 3000 rpm, rotary, 5hp, chip
yang, ck3b, 0tc, 1997, 12"ck, 3.4"bore, 24"sw, 48"bc, 3000rpm, 10trt, 30hp, chip
MACHINING CENTERS, vertical
Fadal VMC20, HS88, 1993, 20", 16", 20", 7500RPM, 16ATC, 15HP, 4th Pre Wire
Fadal, vmc4020ht, 1997, 40" 20", 20", 10,000rpm, 21atc, 22.5hp, probe
Fadal, vmc6030, hs88, 1990, 60", 30", 30", 10000rpm, 21atc, 22.5hp
hitachi, vk45ii-2apc, seicos, 1997, (2) 17"x36" tbls, 40", 20", 20", 4500rpm, 30atc
MORI SEIKI, SL-253BMC, MSG501, 2001, 10"CK,
kitamura, bridgecenter 8, 1996, 11mf, 41"x80", 30atc
3.4" BORE, 26"SW, 23"BC, 3500 RPM, 10TRT, makino, gf-6, 18m, 1997, 41", 23", 22", 8000 rpm, 30 atc, 30 hp, chip
C-AXIS, 3000 RPM ROTARY, 6.5HP ROTARY, makino, s33, 18im, 2004, (2) 24"x16"tbls, 26", 20", 18", 13000rpm, 30atc, cts, chip
TOOL EYE, CHIP
makino, snc86, 18im, 1998, (2) 39"x24"tbls, 31.5", 23.6", 15000rpm, 30atc, probe
Matsuura, Ra-I, MX-3, 1987, (2) 24"x15"plts, 20", 16", 13", 6000rpm, 30atc, 4th axis
Matsuura, ra-ivf 2-apc, i-80, 1995, 40", 21", 20", 8000rpm, 40atc, rt, chip
mazak, vtc-20bx, mplus, 1997, 44", 20", 20", 7000rpm, 24atc, 2d, indexer
mazak, vtc-200b, 640M, 2000, 44", 20", 20", 10,000RPM, 30atc, 28HP, rt, atlm, chip
mazak, sv-25e, 2-apc, m32a, 1992, (2), 110" x37", 102", 32", 29", 4000rpm, 40atc, cts
mighty, vmc1500ag, m530, 1999, 60", 30", 25", 4250rpm, 30atc, 20hp, rt
mori seiki, GV503, 2APC, 16IM, 2000 (2)30"X22" PLTS, 24", 20", 18", 12,000RPM, 30ATC
mori seiki, VS100-50, 18im, 2005, 81", 40", 18", 10000rpm, 90ATC, cts, data server
2001
21090938
MORI SEIKI, ZL-253BSMC/600, 18TT, 2003,
10/8CKS, 3.4" BORE, 3500/6000 RPM, 10/8TRT,
C-AXIS MAIN/SUB, 3000 RPM ROTARY, 6.3HP
ROTARY, APC, EYE, LOADED
vertical boring mills
2001
EMAG HARDINGE, VL-5, 21it, 2001, 10"ck, 12" cking pos. 10.3" max dia. 4.3"max ht,
12trt, 4500rpm, 36hp, chip (2)
MACHINING CENTERS, HORIZONTAL
2006
daewoo, dhm630, 18im, 2005, 25" plt, 39", 31", 33", .001, 6000rpm, 60atc, cts, 30hp, chip
MORI SEIKI mh1003, 2001, 16im, 40" plts, 80", daewoo, dhm630, 18im, 2005, 25" plt, 39", 31", 33", 1deg, 6000rpm, 60atc, cts, 30hp, chip
Daewoo, Puma 300l, 21it, 2006, 12"ck, 4.5"bore,
60", 47", 1 deg. 13000 RPM, 120atc, cts, chip daewoo, dhp630, 18im, 2005, 25" plt, 39", 32", 33", 1deg, 6000rpm, 60atc, cts, 30hp, chip
23"sw, 52"bc, 2800rpm, 12trt, chip
hyundai-kia, h63, 18im, 2006, 25" pLT, 38", 32", 30", 1deg, 8krpm, 60atc, cts, probe (2)
mazak, fh8800, 2003, 640M, 51"x43"x39", 80 Atc, n/c rotary, 10k rpm, chip
MAZAK, h400n, m32a, 1992, 22"x18"x20", 10K RPM, Chip, Cts, 1 deg.
Mori seiki, mh1003, 2001, 16im, 40" plts, 80", 60", 47", 1 deg. 13000 RPM, 120atc, cts, chip
mori seiki, nh5000/40, mapps, 20" plt, 25", 26", 26", 1deg, 14000 rpm, 60atc, cts, chip
okuma howa, 40h, 16m, 1995, 16"plt, 22", 22", 22", .001deg, 10000rpm, 40atc, cts, chip
toyoda, fa550 ii, 15mb, 1997, 22" plt, 29.5", 29.5", 23.6", .001deg, 14krpm,40atc, cts
toyoda, fa630 II, 16IM, 2000, 24.8" PLT, 39.37", 33.46", 30", 1DEG, 14KRPM, 120ATC, CTS
horizontal boring mills
giddings & lewis, mc410, 840d, 2000, 2 (63"x49") tbls, 118", 82", 70", 31.5", 6000rpm,
50hp, .001 index, cts, chip
2000
toyoda fa630 II, 2000, 16IM, 24.8" PLT, 39.37",
33.46", 30", 1DEG, 14KRPM, 120ATC, CTS
hyundai-kia, kbn-135, 16im, 2007, 5.1", 79" x 71", 118", 90", 28", 2000rpm, 40atc, 30hp, .001
index, x,y,z, scales, 1000psi, chip
kia, kbn-135, 16mc, 1999, 5.1", 79" x 71" tbl, 118", 90", 63", 28", 2000rpm, 40atc, 30hp, .001
index, scales, thru spindle coolant, chip
toshiba, bp13 5p, fidia, 1983/2005, 118", 78", 43", 27", 2000rpm, 30hp, scales
Pallets
24.75" Pallets for mazak h630 and ultra 650
22000055
Mori Seiki, VS100-50, 2005, 18iM, 81", 40",
18" 10000RPM, 90atc, cts, data server
Page May 29, 2007 • INDUSTRIAL MACHINE TRADER • 800-203-9960
Mazak V5 VMC Fanuc 5M 1982, X 30", Y 16",
Z 8", 4,000 RPM, 24 ATC
8" G&L HD Planer Type HBM, 8' x 30' Table, 28' Cross
Travel, 10' Vert. Travel, 100 HP, All Solid State Electrics, Outboard Support, 84" Column Longitudinal Travel, 60" Spindle
Travel, # 60 Taper. New 1964, Electrical Retrofit 1994
Mori Seiki SL-3A CNC Lathe, Yasnac LX-1, 8"
Chuck, auto-door
ask about
thru-spindle
coolant retrofits
for your kuraki
boring mills!!
Toshiba BP13B.R4, 1987, Tosnuc 2 CNC, Built-in-Rotary
www.chicagoseiki.com
Mori Seiki MH63 HMC Fanuc 11M 1988,
X 39", Y 31.5", Z 29.5", 1" Index, 4,000RPM,
Chip Conveyor, 60 ATC, Rebuilt 1999
Toyoda FH-55 HMC Fanuc 15M 1990,
X 28", Y 28", Z 22", B 1" Index, 5,000 RPM,
Coolant thru, 120 ATC, 15 HP
Union 4.3" CNC HBM, 55" x 63" Table,, 77"
X, Heidenhain TNC, 415B CNC, Retrofit 1995
LATHES & MACHINING CENTERS
Mazak
Mori Seiki
Dianichi
Okuma
Daewoo
Nakamura
Fadal
Haas
Niigata
Ikegai
Heavy Duty Fanuc CNC Lathe W/S 3-SC, 24"
Hyd. Chuck, 33" Swing, 75HP, 6+" Thru-Hole,
Fanuc 18-T (2)
VERTICAL BORING MILLS & TURNING CENTERS
Mazak Mega Turn
Toshiba
OM Ltd.
Olympia
G&L
W/S Gray
Older Machines OK
Teknics RC724 VMC Fanuc OM 1987,
X 30", Y 16", Z 16", 20 ATC
HORIZONTAL BORING MILLS
Kuraki
Toshiba
Femco
Wotan
SNK/Ikegai
Mitsubishi
Nomura
A ND O T H ER S ! C A L L F O R Q U I C K P AY M EN T A ND F A S T RE M O V A L o r
e - mail you r i n fo r matio n to sal e s @ chicago s e iki . com !
We Always Need Machinery!!
We Want Your Surplus or Underutilized Machines!! We Need All
Types, Lathes, Machining Centers, Vertical and Horizontal Boring Mills
1250 Grove Ave #200 • Barrington, IL 60010
Tel: 847-852-5082 • Fax: 847-852-5083 • [email protected]
Page www.industrialmachinetrader.com
Prime
North Cove Plaza, Unit 10 • Oyster Bay, NY 11771
Machinery, Inc.
Make Prime Machinery Your First Stop
For All Your Machinery Buys & Sells
Contact Steve Brenner Phone: 516-922-7977 • Fax: 516-922-9691
Bookmark Our Website:
www.primemach.com
$95,000
5" Union bfp-130 cnc floor type
horizontal boring mill, heidenhain 360,
retro 2000, 315" x, 119" y, 17" z, 35" w,
universal and right angle heads, facing
head, 70 hp, REF.#46902
DAEWOO Proturn 60, 160" Centers, 28"
swing, fanuc 0, steady rests,
15" chuck
REF.#47192
4" giddings & lewis PC-40, Fanuc 11M,
72" x, 50" y, 1,340 RPM
REF.#47218
6" Giddings & lewis, 80,000LBS
table load capacity, 108" x, 96" y, 40
HP, fanuc 15m with scale feedback,
remanufactured 1995
ref.#47220
$29,500
$29,500
OKUMA crown, 1998, 8" chuck, chip
conv, 4,200 rpm, osp-7000l control
REF.#47161
OKUMA CADET LNC-8, 8" Chuck, collet,
15.75" swing, tailstock, osp-5020L with
graphics, 4,200 rpm,
REF.#46917
Dainichi F-35, 4" bore, 22" swing, 24" cc,
fanuc 18t, 30 hp, 1998, chip conv
REF.#46977
hardinge cobra 42 fanuc 21i-t 5,000
RPM, 16C Collet, Chip Conv, 1998
REF.#45838
$57,500
$37,500
$39,500
$44,500
$29,500
$27,900
mighty vmc-1500g, 58"x, 28.5" Y, 24.5" z,
bt-50, 4,250 rpm, geared head, 20 atc, box
ways, mitsubishi 520a, 1996
REF.#46078
mighty vmc-1000g 42" x, 22" y, 20" z, 50
taper, 4,500 rpm geared head, 16 atc,
mitsubishi m-520 cnc control, 1996
REF.#46114
HWACHEON Model Sirius II, VMC
w/Dual Pallets, 8,000 RPM, “Fanuc O”
22” X, 16” Y, 18”, (2) 24”x15” Pallets,
30 ATC, 1998
Ref.#43272
$59,000
$59,500
$19,900
$19,900
$27,500
fanuc robodrill alpha-t10a cnc vertical
nomura nn-13tb- 4-axis cnc swiss
type turning center with sub spindle, drilling and tapping center, 19.7" X, 15" Y,
11.8 Z, 8,000 rpm, atc, bt-30, fanuc 16-ma
lns barfeeder, 10,000 rpm,
REF.#45492
meldas 520, 2000
REF.#45465
CINCINNATI ARROW 500, 20"X, 20"Y, 20"X,
6,000 RPM, CAT 40, 21 ATC,
ACRAMATIC 2100 CNC CONTROL, 1995
REF.#45694
Warner & Swasey 3SC CNC Lathe,
remanufactured 1994, Fanuc 18-T, 24" Hyd
chuck with 7" bore, tailstock, chip conv,
75 hP
REF.#46923 (2 available)
milltronics ml-15/40 cnc flat bed teach
lathe, 8" chuck, 15" swing, 22" in gap,
36" centers, 3,000 rpm, centurion 6 cnc
control
REF.#45707
Page May 29, 2007 • INDUSTRIAL MACHINE TRADER • 800-203-9960
Created By Auctioneers For Auctioneers • Serving The Industry For Over 5 Years • Created By Auctioneers For Auctioneers
BidSpotter.com was designed by auction-industry experts
O
A M ver
to work with your existing event process and bring your
Pr illio
auctions to a worldwide audience. We work with auctioneers
o
to duc n
Re
to help market their auctions effectively using the most
t
vie s
stable, flexible and successful webcast auction solution
w
available, and with bidders to eliminate unnecessary travel
expenses and lost productivity.
Attention Auctioneers:
Ever thought about opening up your auction floor to millions of potential buyers?
st
Po n
We ctio s
Au sult
Re
BidSpotter offers business and industrial auctions. Now auctioneers can offer their sales online
from anywhere and bidders can bid from the convenience of their home or office!
Weekly auctions of CNC - Construction Equipment - Food Production
IT Presses - Electronics - Lab Equipment - Medical Equipment - Fabrication
Log on, register & bid at http://www.bidspotter.com
upcoming bidspotter auctions
Auctioneer
Event Information
Date
End Date
Rosen & Company, Inc.
BIPCO
10955 Industrial Parkway NW
Bolivar, OH 6/12/07
BIDITUP Auctions Worldwide
Travers USA
Immaculate and Well Maintained Press Facility
Featuring Complete Komatsu
354 Main Street
Gardner, MA
6/12/07
Premier Auctioneers International, Inc.
Oilfield Equip/Trucks/Trailers
1815 S. Meridian
Oklahoma City, OK
6/12/07
Myron Bowling Auctioneers
COLLINS & AIKMAN CORP. - IN
Tier One Automotive Manufacturing Facility
2782 US Hwy 52
Morristown, IN
6/12/07
Koster Industries, Inc.
GMI, Inc.
Tube Making Machinery, Featuring: Vacuum Furnace * Continuous Caster * Capstan Drawing Machines * Rolling Mills * Bull Blocks * Roll Formers And More
200 8th Street
Brooklyn, NY 6/12/07
Canadian Public Auction Ltd.
June 12, 2007 Auction
Industrial Auction
9320 - 52 Street S.E.
Calgary, AB, Canada
6/12/07
Tauber Arons, Inc
Allied Rentals
Contractors Rental Yard
456 Glenoaks Blvd
San Fernando, CA
6/13/07- 6/14/07
Roux Troostwijk S.V.V.
GROUPE RABIER / SALA GRANITS
Stone and marble industry / Industrie de la pierre, marbrerie
Montalieu, France
6/14/07
email: [email protected]
Auctioneer
Event Information
Date
End Date
BIDITUP Auctions Worldwide
Allwest Industries
Amada Fabricating Facility
409 South Vista Avenue
Addison, IL 6/14/07
Stuart B. Millner & AssociatesWestech Tool & Machine, Inc.
Designers & Builders of Quality Tooling, Wire EDM,
2034 Trade Center Drive E
St. Peters MO 6/14/07
Schneider Industries
JN BECH - Mustard Processing Plant
PLANT CLOSED! OVER 300 LOTS!
214 Dexter Street
Traverse City, MI
6/14/07
Myron Bowling Auctioneers
V M & E, Inc.
Featuring: CNC Machining, Large Thru-Hole Lathes & Metal Fabrication
4196 W 8540 S.
West Jordan (Salt Lake City), UT
6/14/07
Stuart B. Millner & Associates
Imperial Tobacco Canada
Machine Shop & Material Handling Equipment
516 John Street
North Aylmer, ON, Canada
6/19/07
Troostwijk Auctions
MUSTANG MARCALI JEANS PRODUCTION
Kossuth Lajos Utca 43
Marcali Hungary
6/21/07
Roux Troostwijk S.V.V.
ARENA
Clothes manufacturing / Confection
166 Avenue de la Roudet
LIBOURNE, France
6/21/07
Stuart B. Millner & Associates
Jefferson City Manufacturing
Diecasting Facility
Jefferson City, MO 6/21/07
Kohler Industries, Inc.
Pride of the South
Brooksville, MS 6/21/07
US: 1-866-597-BIDS
Website: http://www.bidspotter.com • Notre Dame, Indiana • International: 1-574-233-5952
• C reated B y A uctioneers F or A uctioneers • S erving T he I ndustry F or O ver 5 Y ears •
Page Created By Auctioneers For Auctioneers • Serving The Industry For Over 5 Years • Created By Auctioneers For Auctioneers
• C reated B y A uctioneers F or A uctioneers • S erving T he I ndustry F or O ver 5 Y ears •
Page A SUbsidary of liquidity services, Inc.
For a list of upcoming sales
call: 480-367-1300
Can’t Get 3-Phase Power?
Smith Electric Motorworks
GWM
Monoblock
• CNC & EDM Machines
• Machine & Wood Shop Equipment
• Farm Equipment
• Irrigation Systems & Pumps
• Saw Mills
• Industrial Appliances
ETL Listed
Conforms to
Ul std 506
Certified to
Cancsa Std C22.2 No. 14
• 5 year Rotary
Warranty
• Lifetime Warranty
Against Rotor
Failure
• Fast Delivery
• Electrical
Engineer and
Technicians on
Hand to Help Size
Your Converter
Rotary Converters
Single or Multiple motors, transformers, and
resistance loads at 100% power in a broad range
of applications.
Static Converters
Our patented solid-state 3-phase motor starting
relay insures perfect motor starts everytime.
Operate moderately loaded 3-phase motors.
• 95% of motor HP for intermittent duty
• 70% of motor HP for continuous duty
Ask for our Catalog and Informative free publication,
“Understanding and selecting a phase converter”
225 West Hayden Suite 100 • Marceline, MO 64658
(800) 437-4273 • 660-376-9700 • Fax (660) 376-9701
www.gwm4-3phase.com
Call Now: 800-4-3-PHase
WEEKLY
May 22, 2007
®
Volume 24, Issue 22
800-203-9960
The National Marketplace to Buy & Sell New And Used Industrial
Machinery.
Sales Manager
Tammy Sweeney [email protected]
Production Supervisor
Sheila Davis
[email protected]
Account Executives
Mike Fellers
[email protected]
Lee Muller
[email protected]
Virginia Rodríguez [email protected]
Terri Saxton
[email protected]
Sales Assitant
Krisi Berning
[email protected]
Publisher
Tony Smith
[email protected]
Subscription Sales Manager
Donna Hogan
Operations
Tracy Geopfert • Leane Bodle • Dawn Busse
Advertising Designer
Melissa Miklo
[email protected]
Mari Newman
[email protected]
Industrial Machine Trader
Publication of Heartland Communications Group, Inc.
1003 Central Avenue, P.O. Box 1052 • Fort Dodge, Iowa 50501
Advertising & Subscription Sales:
800-203-9960 • 515-955-1600 • Fax Line: 515-955-3753
Advertising Rates, Deadlines, and Mechanical Requirements furnished upon request. Call today for
immediate delivery. All photos and ad copy become the property of
Industrial Machine Trader.
Internet Address: www.imtgetsresults.com • E-Mail: [email protected]
Subscription Rates:
Weekly (First Class). . . . . . . . . . . . . . . . $85.00
Weekly (Third Class). . . . . . . . . . . . . . . . $26.00
Change of Address: Send new address with mailing label to above address Industrial Machine Trader® is
a Registered Trademark. Copyright© 2007, All Rights Reserved. Reproduction in whole or in part without written
permission is prohibited.
The information and advertising set forth herein has been obtained from sources believed to be reliable and
compiled with great care. Heartland Communications Group, Inc., however, does not warrant complete accuracy
of such information and assumes no responsibility for any consequences arising from the use thereof or reliance
thereon. Publisher reserves the right to reject or cancel any advertisement or space reservation at any time without
notice. Publisher shall not be liable for any costs or damages if for any reason it fails to publish an advertisement.
This publication may not be reproduced, in whole or in part, stored in a retrieval system, or transmitted, in any form
or by any means, electronic, mechanical, photocopied, recorded, or otherwise, without the prior written permission
of the publisher.
Joseph W. Peed, Chairman of the Board
Gale W. McKinney II, President & CEO
Patrick Van Arnam, Sr Vice President/COO
Mary Gonnerman, Vice President
Sandra VanScoy, Director of Financial Services
Tony Smith, Director of Marketing Strategies & Training
Jonathan Berg, Director of Information Services
Sara Blair, Director of Human Resources
Ken Grams, Director of Production Operations
Jim Hill, Director of Creative Services & Editorial
Sandra J. Simonson, Director of Circulation Services
Page 12
ASK
ABOUT OUR
WARRANTY!
1500 WATT MAZAK TURBO-X48
4' x 8' Trvl., Mazatrol L32B CNC,
Well Maintained, 1998
#15832
2000 WATT HANKWANG KOBA 3015
60" x 120", Fanuc 16L CNC, (Blower
Rebuilt '06), New 2000
#15555
2000 WATT MITSUBISHI 2512-LXP
4' x 8' Dual Pallet, LC10BV CNC
3020D Resonator, 1998
#15756
2700 WATT TRUMPF L2530 PLUS
4' x 8', Siemans 840D, 2-Pallet, 2-Axis
Y-Plus Head 9" trvl, 2002
#16464
3000 WATT AMADA PULSAR 2415XL
61" x 99" Trvl, Fanuc 160iL CNC,
Non-Contact Head, 2001
#14760
33 TON AMADA PEGA-S358
04PC CNC, 58 Sta., (4) A.I., 50" x 80"
Trvl., Ball Table, Hyd. Clutch, 1998
#16249
33 TON AMADA VIPROS 358 KING
Fanuc 18P CNC, 58 Sta., (4) AI,
50" x 80" Trvl., Brush Table, 1998
#16248
33 TON AMADA VIPROS 358 KING
O4PC CNC, 50" x 78.74" Trvl., 58 Sta.,
4 A.I., Rebuilt Ram, 1995
#15870
33 TON AMADA VIPROS 357Q
Fanuc 18P CNC, 45 Sta., (4) A.I.,
50" x 72" Trvl, Hyd. Press Drive, 1999
#15261
33 TON AMADA VIPROS 358FMS
Fanuc 18P, 50" x 80" Trvl., 58 Sta.,
(4) AI, ASR Load/Unload w/Tower, 1998
#15482
60 TON WHITNEY 661-96
X-160", Y-96", Fanuc 160i-P CNC,
45 ATC, HT-2000 Plasma, New 1999
#15938
88 TON AMADA ASTRO 100ME
Bending Cell, 8'OA, AMNC 8-Axis CNC,
6-Axis Robot, Elec. Foot Switch, 1999
#16023
350 TON NIAGARA HD-350-10-14
Zakron 2-Axis CNC, 14'OA, 10'6"BH,
1/2" x 12', 12" Stroke, 1984
#16377
350 TON CINCINNATI 350 CB-II x 10
3-Axis CNC, 12' OA, 10'6" BH,
16" Stroke, 2-Axis HD B.G., 1998
#16242
AMADA FABRIVISION II 4800
48" x 48" Table, (8) Cameras,
Unlimited Part Length, 2001
#16241
OMAX ABRASIVE WATER JET
55" x 100", 55000 PSI, 40 HP, Omax
CNC, Removal Sys., 600 Lb., 2003
#16088
REQUEST
A FREE
CATALOG
TODAY!
35 Pinelawn Road, Melville, NY, USA, 11747
[email protected]
www.prestigeequipment.com
06-01-07 FAB
Tel: (631) 249-5566
Fax: (631) 249-9494
Page 13
Charleston Annex Corporation
Metalworking Machinery • Plants • Bought, Sold, & Liquidated
301 Post Office Drive, Suite D • Indian Trail (Charlotte) NC 28079
Phone: 704-821-7370 • Fax: 704-821-7392
Charleston Annex wants to turn your surplus metalworking machinery into Cash!!! • One Machine or an Entire Plant.
Vertical BORING MILLS
Sant Eustacchio 118" Vertical Boring Mill, 130" Swing under cross rail, 59" ram head
stroke, 50 RPM, coolant (#1184)
CNC HORIZONTAL BORING MILLS
Giddings & Lewis 6” No. G60-T, 60”x120” Table, 120” Cross Trvl., 72”
Vertical, 54” Saddle, 40 HP, G&L 800 Pendant Control, Excellent Cond., 1980
(#276)
HORIZONTAL BORING MILLS, Table TYPE
Cincinnati Gilbert 4" Table Type HBM, 60" x 110.5" Table, 84" headstock
vertical travel, 96" table long travel, 8-1715 RPM, Full pendant control, outboard
saddle supports. (#1109)
SOLD
special off
BORING MILL ACCESSORIES, ROTARY TABLES, FACING HEADS
Timesaver 37" wet belt sander,
Mfg 1996
Supermax 3 axis cnc vertical machining center, Mfg. 2003
Maho 4-axis universal cnc
milling machine
Angle Plates 18" x 72" x31", Cast Iron (#1022)
Titan 19.75" Continuous Feed Facing Head (2) (#744)
titan Universal Milling Attachments (2) (#745)
G I D D IN G S & L EWIS 100 Station Automatic Toolchanger,
#50 Taper of Tool Pockets, Stand Alone (#454)
Giddings & Lewis 48" x 66" T-slotted Rotary Table (#1018)
29" Continuous Feed Facing Head, w/Toolholder (#872)
CNC Vertical Machining Centers
Kitamura 3 Axis, Model # 5B 22-1/2"x 55-3/8" Table, 43" X, 22" Y, 22" Z,
3500 RPM's, Fanuc 11M Control, #50 Taper (#843)
HURCO Mod. BMC30/SSM CNC Vertical Machining Center, X 30", Y 18", Z
24", 8000 RPM, Ultimax SSM control, mfg 1997 (#1167)
SUPERMAX XV1020A, 40" X, 20" Y, 21" Z, 8000 RPM, 24 ATC, Coolant,
2003, Control, Toolholders and Fanuc MXP-100i CNC Pendant Ctrl. Like New
(#1086)
MATSUURA MC-510VG 4 Axis CNC Vertical Machining Center, 15" x 30"
table, 15,000 RPM,, 20" X, 14" Y, 18" Z, 20 ATC, 1997 (#1192)
HAAS VF-1 CNC Vertical Machining Center, 14" x 28" table, 5000 RPM, 16
ATC, 1992 (#1193)
CNC Horizontal Machining Centers
Niigata 3 Axis CNC HMC, Model EN50-F6M, (2) 19.69" x x19.69" pallets, 24.8"X,
25.2"Y, 25.6"Z, 3500 RPM, 24 ATC, 6M Fanuc. (#284)
Universal CNC Milling Machine
Maho 4 Axis Universal CNC Milling Machine, Model 700U, 25" rotab, 27.5" X,
17.7" Y, 19.6"Z,, 3150 RPM, Universal Tilting Head, Maho/Phillips 432 CNC
control, Full B axis (#1033)
Tree Journeyman Mod-35C, 3 axis CNC Vertical Milling Machine, 9.8"x39.3"
table, 26" x-axis, 14" y-axis, 6" z-axis, #40 tpaer, dynapath CNC Autocon Control,
Mfg. 1995
optical tool presetters AND INSPECTION MACHINE
Messma-kelch cnc Optical Tool Presetter, Mod. #361, 620 x 370
Measuring Range, #30/40 Taper Preset Stations, Projector (#732)
TRIMOS TELMN500 Setting & Checking Instrument, DRO, 0"-22" Measuring
Range, .0001" Resolution
CNC LATHES
Citizen Cincom Model L20-VII 5 Axis CNC Turning Center (screw machine),
w/C Axis Main Speeds to 10,000 RPM's, 79" Bar Cap, 7.87" Lgth., 5000 RPM
Rotary Tool, Back Spindle Speeds to 8000 RPM, (17) Tools, Meldas 635LC 5
Axis CNC Control Mfg. 1998 w/ LNS Barfeed (#1187)
mazak Quick Slant 20 4 Axis Twin Turret Turning Center, 15.75" swing, 9.7"
turning diameter, 20" work length, 2.7" bore, 16-4000 RPM, 6" 3 Jaw chuck,
twin 8 station Turrets (#1120)
Mitsubishi M-TC8B 2-Axis CNC Slant Bed Turning Center, 8" 3 jaw chuck, 23.6"
swing, 20.5" max center distance, 8.1" X, 22" Z, 2.56" bore, 35-3500 RPM, 15HP, 12
position turret, tailstock, auto chip conveyor, Meldas 325 LG-V CNC control, mfg 1995.
(#964)
MORI SEIKI SL2-B CNC Turning Center, 22.44" swing, 6.3"x, 16.14 z, 2500
RPM, 10 position Turret, Yasnac 2000 G Control. (#1094)
(2) NAKAMURA TOME Methods Slant SL-3B CNC Turning Centers, 30.1"
Swing Over Bed, 18.9" Swing Over Cross Slide, 3500 RPM, 12" 3 Jaw Chuck,
Tailstock, 12 Station Turret, 1991, Fanuc III-A CNC Ctrl. (#1088, #1087)
BORING LATHE BELOIT Turning & ID Boring Lathe, 42.5" - 70" boring diameter, 395" max workpiece
length, (2) turning carriages, (2) hyd steady rests, 145 HP, 1987 (#1191)
High Speed CNC Router
American GFM Mod #RM-30 High Speed CNC Router, 200”x67.7” Max.
Part Size w/ (2) Vacuum Tables Joined, 78.7” x 67.7” w/Tables Separated, X204”, Y-92.3”, Z-11”, T-N x 360, 4,500-45,000 Spindle RPM’s, 8 Position ATC,
GFM CNC 6000 CNC Control, Mfg. 1998 (#695)
Engine Lathes
Leblond Regal 23" x 54" Lathe, Inch Threads, 5 H. P., 18" 4-Jaw (#970)
Leblond 19" x 102" Engine Lathe, (12) Speeds 40-1600 RPM, 12" 4Jaw Chuck,
Threads, (#976)
Leblond 14" x 42" tool & Die Lathe, Inch Threads, Taper, 12" Dia., 6-Jaw Chuck (#971)
Cincinnati 17"x30 Hydrashift Toolroom Precision Lathe, 17 1/8" Swing, 11 1/4" over cross
slide, 33" centers, tailstock, 25-980 RPM, taperr turning attachment, 10" 3 Jaw chuck (#1118)
Turret Lathe
Bardons & Oliver #4 Turret Lathe, 4" bar cap, 18" swing, 1550 RPM,
hexagon turret, 12" 4 jaw chuck, (#977)
Warner & Swasey #3A Turret Lathe, 23.5" swing, 6" bar capacity, 5-1535
RPM, 6 position turret, 21" 4 jaw chuck, (#1147)
SOLD
SOLD
SOLD
LVD/STRIPPIT 13' X 1/4" HYDRAULIC PROGRAMMABLE SQUARING SHEAR,
MFG. 2000
Taisei Internal Grinder
33" Swing
Bar Cut-off lathe
BARDONS & OLIVER Cut-Off Lathe, 90-1076 RPM, 52" support arm, chip
conveyor, 13' magazine fee, (#1117)
Spin LATHES
Lodge & Shipley Spin Lathe (#1068)
MILLING MACHINES
Bridgeport Series II Vertical Universal Mill, 11" x 58" Table, 3500 RPM, 4 HP,
Sony Millman, 2 Axis DRO, coolant (#1168)
CINCINNATI Vercipower Plain Horizontal Mill, 95.5” x 20” Table, 50” Long Travel, 16”
Cross, 24” Vertical, #50 Taper, 1400 RPM, Acu-Rite 11 3 Axis DRO, Coolant (#1062)
TREE JOURNEYMAN 350 Vertical Mills, 9.8” x 39.3” Table, 26” X, 14” Y, 6” Z,
#40 Taper, Dynapath CNC Autocon Control, Universal Head, (#1049)
polamco Vertical Mill, Mod. #FYA-41M 78 3/4” x 15 3/4” Table, 3 Way Power Rapid
Traverse, #50 Taper, 1500 RPM’s, 14 HP, Pendant Control (#728)
Cincinnati #6 Wide Knee Horizontal Knee MIll, 23" x 104" Table, #50 Taper,
Dynapoise Overarm, Spdl. Speeds to 1400 RPM (#990)
BRIDGEPORT Series 1 1/2 HP Vertical Mill, 9" x 42" Table, 26.5" Long
Travel, 12" Cross, 16" Knee, 60-4200 RPM, 2 Axis Acu-Rite DRO (#1097)
CINCINNATI Cinova 80 Vertical Dial Type Mill, 14" x 63" Table, 34" Long
Travel, 12" Corss, 14" Vertical, #50 Taper, 2000 RPM, Coolant (#1100)
DUPLICATING MILL
RAMBAUDI 4 Spindle 3 Axes CNC Vertical Duplicating Mill, 24" x 114.1"
Table, 49.6" Long Travel, 23.6" Cross, 3000 RPM, 2 Dual Spindle Heads, #40
Taper, 20 HP, Very Clean (#1096)
Gun, Multi-Spindle & AssORTED Drills
Techni-Drill 3 Axis Gun Drill, 1" capacity, 48" x 60" table, X 60", Y 48", Z 36",
Allen Bradley Techni-Drill TDS-2000 CNC pendant control, mfg 1998 (#1134)
CLAUSING 20” Vari-Speed Drill, With Air-Hydraulic Spindle Feed, 2000 RPM,
#3MT (#571)
Edlund 24" Box Column Drill, Mod. #2F12 Adjustable Table & Spindle (#989)
RADIAL ARM DRILLS
SASS 11’x29-1/2” H.D. Radial Drill, 133” Swing Radius, #6MT Spdl., Speeds 13 to
1050 RPMs, Mounted on 78.7”x236” T-Slotted Floor Plate, Box Table, Pwr. Clamp,
Coolant, Rapids, Pendant Control – Late Model (#357)
YMZ 8' x 19" Radial Drill, Model TRE-2500D, #5MT Taper, 20-2000 RPM, T-Slotted
base & box table (#1100)
Soraluce 6 1/2" x 19" Radial Drill, #6MT Taper, 38-1650 RPM, T-Slotted base
& box table. (#1111)
CARLTON 6' x 17" Radial Arm Drill, Model #4A, #6MT, 10-1000 RPM, 25 HP,
excellent! Mfg. 1970 (#1162)
American Hole Wizard 5' x 15" Radial Arm Drill, 1200 RPM, 2-slotted
box tables (#1156)
HONES
SUNNEN CGM - 5000 Kross Grinding hone System, 10 range .312" - 1.250", 5000
RPM, New 1993 (#1105)
SUNNEN / SUPERIOR Model # Bra-Mar SV-7, Vertical Hone, Coolant
System, Rolling Bolster Table, 7" Max. Dia., 28" Vertical (#896)
PRESS BRAKES
CINCINNATI 350 Ton x 12' CNC Hydraulic Press Brake, Mod. # 350 CBII Z
1, 10'6" B.H., 16" Optional Max Stroke, 2 Axis Heavy Duty Back Gage, Cinci. 3
Axis CNC Control, Mfg. 1999 (#1171)
Cincinnati 90 Ton Hydraulic Press Brake, 12" overall legth, 10' between
housings, Hurco CNC backgauge (#1084)
AMADA 88 Ton Model #Astro 100-8025 Fab III, CNC Robotic, Press Brake,
Bending Cell, 98.43" O.A. Length, 86.61" B.H., ERX1210 6 Axis Robotic
Loader/Unload & AMNC RML 39 BM 9 Axis CNC Control, Mfg. 2001 (#1179)
EXCELSIOR 8' x 65 Ton Mechanical Press Brake, 72" Overall, 54" Between
Housing, 3" Stroke, 4" Ram Adj. (#899)
Verson 65 Ton Press Brake, 6'6" Between Housing, Air Clutch & Brake (#868)
SOLD
SOLD
www.charlestonannex.com
Charleston Annex Corporation
R
ASSOCIATION OF
MACHINERY AND
Metalworking Machinery • Plants • Bought, Sold, & Liquidated
Appraisers on Staff
301 Post Office Drive, Suite D • Indian Trail (Charlotte) NC 28079
Phone: 704-821-7370 • Fax: 704-821-7392
MACHINERY DEALERS
Charleston Annex wants to turn your surplus metalworking machinery into Cash!!! • One Machine or an Entire Plant.
l offer
Bridgeport
Series II
11" x 58" Pwr. Feed Table, 4 H.P., 3
Way Pwr. Feeds, Vari Speeds, D.R.O.
Was $8,950
Special offer $39,500
shearS
LVD/strippit 13’ x 1/4" Hyd Plate Shear, 42" Back Gauge, Flush Floor,
Mfg. 2000, (#999)
American Hercules 12' x 3/8" Hydraulic Shear, F.O.P.B.G., Flush Floor, 1980 (#793)
PMI CNC Front Sheet Loader for Shear
PLASMA BURNING MACHINE
L-TEC/Heath (EsAb) Model 628-121, 2 Plasma Torches, (2) 7' x 90' Water Table,
L-TEC Series 2000 170 CNC Control, 192” Between Gantry x 36’ Travel, 1991 (#943)
plate saws/saw sharpeners
Oliver Plate Saw, 8', model 879, 8" thick x 8' maximum width, infeed / outfeed
table, hydraulic overhead material clamping, 12' squaring fence, 70 RPM (#1015)
beveler
pullmax Fixed Angle Beveler, Mdl. X8:30, 1/4”-5/16” Capacity, 30 Degrees,
6-11 FPM (#285)
Resistance Seam Welder & Spot welders
Automation International Inc. 200 KVA Resistance Seam Welder,
Model # SG-18-CG, 12” Dia. Copper Wheels, 18 1/4” Throat, Weldtronic Technitron 500
Control, Mfg. 1998, 3 Ton Chiller, Repo’d w/ Little Use From Research & Test Facility (#687)
Acme 100 KVA Spot Welder, Mod# PT15-24-100, 24" Throat, Intertron Controls, S/N 13270
Acme 75 KVA Spot Welder, Mod# PT15-36-75, 36" Throat, S/N 10384
CNC Ram EDM
Omega CNC Ram Type EDM, Model 405-D, 17.7" x 9.8" table, 9.8" x 5.9" y, 8.6" z, mfg.
1996 (#962)
CNC WIRE EDM
SODICK A280L CNC Wire EDM, 15.7" x 11.8" x 6.9" max part dimension (#961)
PRESSES, O.B.I., GAP FRAME & HIGH SPEED
AIDA 165 Ton Gap Frame Press, Model PC-15 (2), 7.8” Stroke, 45 SPM, Air Clutch, Brake
& Counterbalances, 1970’s (#579)
NIAGARA150 Ton Mdl. E-150, 6” Stroke, 32 SPM, Single Back Geared, 22-1/2” Shut
Height, Slide Feed, Air Clutch, Brake & Counter Balance (#65)
NIAGARA 110 Ton OBI Press, 10" Stroke, 19.5" Shut Height, 35-70 SPM, 28"x21" Ram, 5"
Ram Adjustment, AC & B, Cushion, Counter balance, (#1122)
L&J 100 Ton Single Geared OBI, 9" Stroke, 22" Shut Height, 42"x28" Bed Area, A/C, A/B &
Air Cushion, Vari-Speeds, Dual Palms, Mfg 1981 (#916)
MINSTER 75 Ton Backgeared OBI Press, Mod. # 7.6" Stroke, 19" Shut Height, 40 SPM,
Air Clutch & Cushion, Air Counter Balance, Brake Monitor, Etc. Excellent Condition (#1159)
ROUSELLE 60 Ton OBI, 4" Stroke, 50 SPM, 30 " x 18" Bed (#901)
L&J 45 Ton high Speed Gap Press, Mod 45SS, 1" Stroke, 3" Adj., 12-1/8" Shut Height,
Air Clutch & Brake, Loaded! Mfg 1980 (#992)
L&J 27 Ton High speed Gap press, Mod. 27SS, 1" Stroke, 2" Adj., 10" Shut Height, Air
Clutch & Brake, Loaded, Mfg. 1980 (#991)
PRESSES, STRAIGHT SIDE, HYDRAULIC & C-FRAME
PACIFIC 750 Hydraulic Press Former, 84" x 32" Bed, 18" Stroke, 34" Shut Height, Well
Equipped in Excellent Condition, (#927)
BLISS 500 Ton Straight Side Press, Model SE4-500-96x60, 96”x60” Bed, 24” Stroke,
AC & Brake, Flush Floor, 0-25 Variable SPM, 40” Wide Windows (#555)
KOMATSU 300 Ton Straight Side Double Crank Press, Model E2M-300,
43.31" x 72.8" T-Slotted Bed, 21" Open Height, 30-80 SPM, Feed Equipment,
AC&B, Counterbalance, Mfg. 1985 (#1089)
KOMATSU 220 Ton Press, model OBS 200-39, 8.4" stroke, 25-60 SPM,
33.46" x 25.59" slide area with Perfecto 24" Feeder, Straightener, & 10,000 Lb.
Capacity Coil Reel, Mfg. 1988, in Excellent Condition(#1154)
P.H. Hydraulics 30 Ton C-Frame Hydraulic Press, Mod. OGF-30, 24" x 18"
Bed, 18" Stroke, 27" Daylight, Excellent Mfg. 1992 (#803)
P.H. Hydraulics 20 Ton C-Frame Hydraulic Press, Mod. OGF-20, 12" x 24"
RAM w/(4) Guides, 20" Stroke, Mfg 1998 (#1005)
CARBIDE, COLD SAW & MITRE CUTTING
Trennjaeger Semi Automatic Mitre Cutting Cold Saw, Mod. LPC 110/400, 4 1/2”
H x 16” L Cutting Capacity, 4 1/2” H x 11” L at 45 Degrees, 14” Blade (#741)
STRAIGHTENERS, FEEDERS, DEREELERS
Double End Motorized Wire Dereeler, 22 1/2" Coil ID, Approx 16" Max. Width,
New Condition on Pedestal (#1004)
Cooper Weymouth 5,000 lb.x 12” x .090” Cradle/ Straightener, 48” O.D., 7
Rolls, Variable Speed w/Loop Arm (#600)
AMERICAN 2500 lb. Motorized Uncoiler, 21” Mandrel, 16”-20” ID, 60” OB (#921)
LITTEL 8”x.041” Straightener, 7 Rolls, Entry Pinch Rolls (#919)
LITTEL 12”x.030” 9 Roll Stock Straightener, Entry Pinch Rolls (#923)
LITTEL 24" x .078" Straightener, 5 rolls, Loop arm, variable speed (#918)
ROWE .30" x .065, 30" Wide, 7 Rolls, Variable Speeds, Mod ST30 (#925)
ROWE 3000 Lb. Coil Cradle, Mod#3015-PR, 15" Wide X 48" O.D., Powered with
Loop Arm (#922)
PLANERS & PLANER MILLS
ROCKFORD 44"x240" Hydraulic Openside Planer, 100 FPM, (2) Swivel Heads, (1)
Ram. (#163)
CNC Creep Feed/Surface Grinders
Brown & sharpe 1636 Hi Tech CNC Surface Grinder, 3-Axis, 16" x 36"
Electromagnetic Chuck, Cont. Feed Rates From 0-225 IPM, 19" Vertical Feed, Allen
Bradley Series 9 CNC Control, Mfg. 1991 (#1053)
Internal Grinders
Taisei Internal Grinder, Model GRI-20005, 1.97-27.6" diameter cap, 39.4" length cap,
33.5" swing, 6 grinding heads, 7000 RPM, (#1114)
Rotary Grinders
Blanchard 42", Mod# 22D-42, 48" Sliding Inside Guards, 22", Segmental Wheel,
18" Height, Ebbco Coolant System (#846)
Blanchard 36"Rotary Grinder Vertical Spindle, Model 20K36, 20" table slide travel,
5-27 RPM of table, 750 RPM Grinding wheel speed wet base, 1970, exc. Cond. (#1165)
Blanchard 36" Rotary Surface Grinder, Model 18-36, 720 RPM, 25 HP, Wet base, #1136
Centerless grinders
Rossi Monza, model 500, 1/32" - 6" capacity, 20" x 10" x 10" wheel, 250 RPM,
automatic 12 speed infeed attachment (#1126)
Cylindrical Grinders
Yam Universal Cylindrical Grinder, 10.6" Swing, 39.37" Between Centers, 360 RPM,
Tailstock, (#1000)
RECIPROCATING TABLE SURFACE GRINDERS
mattison 24"x24"x60", Incremental Downfeed, 25 HP (#849)
MISC. GRINDERS, TOOL & CUTTER GRINDERS
MAY Mdl. 12 Drill Grinder, 1” Capacity (#330)
(4) Giddings & Lewis (Winslow) Drill, PointersMod. Winslowmatic HC & HC
101, Late Mfg. to 1996 (#701/702/703/705)
Oliver Drill Grinders, Model 600 (#700)
cincinnati Double End Pedestal Grinder (#340)
cincinnati Milacron universal T&C grinder, 10" swing, 16" long travel, 10" cross, 6"
x 36" table, 180° table swivel, etc (#1112)
Rush Universal Drill sharpener, Model 250A, (#1057)
Parts Washers/Blast Cabinets
Morigo Seiki 18”x18”x36” Capacity, 26 High Pressure Nozzles, Mfg. 1997 (#791)
SANDERS
TIMESAVER 37" Wet Belt Sander, 45 FPM, 20 HP, built in knife air dryer, conveyor,
mfg 1996 (#1170)
TimeSaver, 55" Belt Sander Model 55, 21 HTL, 150 HP, Automatic Tracking,
Variable Speed Conveyor (#968)
37" Grinding Master Belt Sander with Dust Collector, 18 H.P.,
Mod#USMSM B900 (#1180)
Air Compressors & Dryers
atlas copco, 258 H.P. Rotary Screw Air Compressor, Mod. # GA160100, w/enclosure, Air Cooled, 8456 Load Hrs., MFG, New: 2002
Ingersoll Rand, 400 HP, 2 Stage Rotary Screw Air Compressor, Mod#
SSR-EPE400-28, 1991 CFM@125 PSIG, Intellisys Control, MFG: 1998.
Ingersoll RAnd, TM 1900 Refridgerated Air Dryer, Can Handle 400
HP Air Compressor (#1107)
Ingersoll RAnd, Mod. TS 1650 A, Refrigerant Air Dryer can handle
258 H.P. Atlas Copco Compressor. (#1197)
Miscellaneous
National 1/8" Capacity Cold Header w/Straightener (#935)
Hurco bmc 30/SSm CNC, vmc,
1997
SOLD
Cincinnati vercipower mill
Ingersoll rand 400 hp, 2 stage
rotary screw air compressor
SIGMA T-Nut Staking Machine, Vibratory Bowl Feeder, 26" x 30" Table (#900)
new arrivals! call for full specs
mazak v-10n Vertical Machining Center (#1132)
MAZAK V-550B CNC Vertical Machining Center
Mazak Quickturn 15N CNC Lathe (#1131)
MAZAK M4 60" CNC Lathe (#1144)
MAZAK 40" CNC Lathe
G&L Fraser 4" 340T Table Type Horizontal Boring Mill
Ta Shing 20" x 58" Engine Lathe (#1128)
Lion 20" x 80" Engine Lathe(#1133)
Poreba 28" x 120" Gap Bed Engine Lathe (#1137)
Hercules Ajax 21" x 60" Engine Lathe (#1138)
Hercules Ajax 18" x 80" Gap Bed Engine Lathe (#1130)
Enco Vertical Mill (#1139)
Induma Vertical Mill (#1148)
DoAll 10" x 30" Hydraulic Surface Grinder
Powermatic Vertical Bandsaw
HMC 10' Hydraulic Press Brake
Americor 10' x 1/4" Power Squaring Shear
Metal Muncher Hydraulic Ironworker
Buffalo Model 1H Angle Bending Roll (#1129)
Hobart Mega Meg 300RUS Welder
Giant W3 Vibrator Finishing Machine
Peerless 2 HP Pedestal Grinder
Clark 3HP Pedestal Grinder
Linns 1 HP Pedestal Grinder
MatsuUra mod# MC510VG, 4 Axis,
15000 RPM, VMC, 1997
WARNER & SWASEY #3A TURRET LATHE W/CROSS SLIDING TURRET
www.charlestonannex.com
Page 16
,
Visit us at
www.jordancraigmachinery.com
TO VIEW A COMPLETE LIST
38.5 ton, amada rg35s nc9exii, 1987
Our stock number: 8092
110 Ton, AMADA RG100, nc9exii 3-axis bg, 2000
33 Ton AMADA, PEGA 357 FANUC 04PC, 58sta., 2
A/I, MFG: 1990
90 Ton, CINCINNATI 90CBII8, HURCO 7 2-AXIS CNC,
10' O.A., 1996
110 Ton, AMADA RG 100s, nc9ex, 1984
AMADA, MP1225NJ LOADER, EXCELLENT
CONDITION, 1999
28 Ton, TRUMPF, trumatic tc260A rotation,
bosch, cnc, 1993
37", Timesavers, NO. 137-2hdcmw, 1994
trumpf, No. l2530, 3000watt, 4' x 8', siemens,
1998
110 Ton, AMADA RG100, NC9EXII 3-Axis BG, 2000
22 Ton, WIEDEMANN, M2125 FANUC OP, 2 A/I,
TOOLING: 112, MFG: 1994
33 Ton, AMADA, Vipros 367 fanuc o4pc, 58 sta.,
2 a/i, mfg: 1993
Check out our web site for Photos, Specifications and a more complete inventory at
JORDAN CRAIG MACHINERY INT'L LLC, P.O. Box 737, New City, NY 10956
Tel 845-398-0073 [email protected]
Fax 845-398-0074 www.jordancraigmachinery.com
Page 18
Visit us at
TO VIEW A COMPLETE LIST
33 Ton, AMADA, vipros no.358 kingii, fanuc 18p,
4 a/i. Installed: 2003
22 Ton, AMADA VIPROS 255, fanuc 18p, 31 sta., 3
a/i, brush table, mfg: 1998
33 Ton, AMADA, pega 357 fanuc 04pc, 58sta., 2
a/i, mfg: 1995
AMADA MP1530, 5' x 10' Load/unload, 1500
hours, mfg: 2000
33 Ton, AMADA, VIPROS 368 KING II, FANUC 18P,
4 A/I, 2000
33 Ton amada Vipros 357 queen, fanuc o4pc &
phnc, 58sta., 2 a/i, mfg: 1997
33 Ton, AMADA, Vipros 367 fanuc o4PC, 58 Sta.,
2 a/i, mfg: 1995
33 Ton, strippit, 1250sxp fanuc op, 33 sta., 3
a/i, prog. clamps, 1991
33 Ton, STRIPPIT, NISSHINBO MTP750, FANUC 6M,
THICK STYLE, 1 A/I, 1986
55 Ton, AMADA, fbd5020, nc9exii 3-axis cnc,
78.74" o.A., 1989
110 Ton, amada rg 100, NC9EXII
3-AXIS BG, 1996
33 Ton, Strippit/lvd 1500H30 (1.5M) cnc turret
punch MFG: 2000
Check out our web site for Photos, Specifications and a more complete inventory at
JORDAN CRAIG MACHINERY INT'L LLC, P.O. Box 737, New City, NY 10956
Tel 845-398-0073 [email protected]
Fax 845-398-0074 www.jordancraigmachinery.com
Page 19
DAEWOO Model
DMH400 CNC
Horizontal Machinging
Centers (2)
Pallets: 16" x 16";
Speeds to 12000 RPM;
No. 40 Taper; With 60
Station ATC; Coolant
Thru Spindle; Chip
Conveyor and Fanuc
16iM CNC Control,
New 2001
SMW SAMSYS Space Saver
2100 Bar Feeder
Max. Length of Bar: 62";
Maximum Diameter: 3.2"
Round Complete With Link
Cable - New 2002
MAKINO Model A51 CNC
Horizontal Machining
Centers (2)
Pallets: 15.7" x 15.7"; Speeds
to 12000 RPM; No. 40 Taper;
MAKINO Model S33
MAKINO Model A71
With: 1 Degree Index; 40
CNC Vertical
4 Axis Horizontal
Station ATC; Coolant Thru
Machining Center
Machining Center
Spindle; Chip Conveyor and
Pallets: 15.5" x 23.5";
Pallets: 19.7" x 19.7";
Fanuc Pro 3 CNC Control
New 2004
No. 40 Taper; With 30
No. 50 Taper; With: Full
Station ATC; Coolant
4th Axis; 40 Station
Thru Spindle; Chip
ATC; Coolant Thru
Conveyor and Fanuc
Spindle; Chip Conveyor
Pro 3 CNC Control
and Fanuc Pro 3 CNC
New 2004
Control, New 2004
DRILLS, ALL TYPES
WILTON 4-Spindle Model 4800 Drill Press, Speeds to 3300 RPM, Table Size 24" x 80"; No. 2 M.T., (4) 3/4 HP Mtrs., With (4) Chucks New 1985... ........................................................................................................................................................................$2,950
GRINDERS, MISCELLANEOUS
MOHAWK Mdl. 330 3” Capacity Auto. Drill Grinder, Overall Length Up to Long, New 1987........................................................$2,950
LATHES, CNC
SOUTH BEND MAGNATURN 1220 2-Axis, 12" swing, 4500 RPM, With 15 HP Spindle Motor, 8-Station Turret, 6" and 8" 3-Jaw
Chucks, New 1996................................................................ ............................................................................................$14,500
Machining Centers, CNC
Tree Mdl. 425 Journeyman 3-Axis CNC Vertical Mill, 12" x 51" Table, No. 40 Taper, Speeds to 3500 RPM, 7-1/2 HP Motor, With
Dynapath Delta Autocon 30 3-Axis CNC Control - New 1991..............................................................................................$14,500
FABRICATION EQUIPMENT
STRIPPET Custom 18/30 Punch & Notcher, Max. Hole Dia. 3-1/2" in 12 ga.; With Duplicator and Large Amount of Tooling, New
1976...................................................................................................................................................................................$5,950
PRESSES, MECHANICAL
Niagara 110 Ton Model E-110 OBI, Geared, 5" Str., 19-1/4" S.H.,54 SPM, Air Clutch, Cushion, Palm Buttons, new 1975......$18,500
NIAGARA BP2-300-72-48 300 Ton SSDC Press, Bed Area 72" x 48", Stroke 12", Shut Height 27", Speeds 12 to 24 SPM, w/Air Clutch
& Brake, 8 Point Gibbing, Air Counterbalance Cylinders & Tonnage Indicator, New 1987...................................................$20,000
BLISS 60-Ton Mdl. C60 Flywheel OBI, 4” Str., 14” S.H. 100 SPM, w/Air Clutch Dynamic 6” Slide Feed, New 1966..................$16,500
SAWS
ECONOMY WAGNER Mdl. KLN-2 Cold Saw, 2” Square Cap., Speeds to 32 RPM, w/24’ Magazine Feed Table, New 1985..............$5,950
WELDERS
PEER 30" Rocker Arm Spot Welder, 30 KVA, 230 Volt With III Controls; Foot Pedal and No. 105 Single Phase Microprocessor - New
1990...................................................................................................................................................................................$4,950
MISCELLANEOUS
American Steel Line 1000 lb. Motorized Coil Reel, 18" Wide; 54" Max. O.D.; (3) Keepers and Foot Pedal..............................$1,250
SUNNEN Mdl. MBC1802 Hone, w/Power Stroker, New 1983.......................................................................................................$5,950
SUNNEN Mdl. MBB1600 Hone, New 1965..................................................................................................................................$1,950
All Machines Can Be Inspected In Our Warehouse
Most Machines Sold With 30-Day Return Privilege Guarantee
Jordan Machinery Co., Inc.
P.O. Box 391
Greenwood, IN 46142-0391
317-882-1478
Fax 317-887-1487
R
[email protected] • www.jordanmachineryinc.com
ASSOCIATION OF
MACHINERY AND
Appraisers on Staff
Page 20
MACHINERY DEALERS
HCI
Call Us With Your Surplus Equipment
Ask About Our Financing Options
FEED EQUIPMENT
• Airfeeds Mdl. DAF-1 Air Feeder, Cap., .080 30” x 24”, S/N 82-0228, Sgl. Grip
• 12" x .078 CWP Servo Feeder, 2001, Model ServoMax III
• 12" x .120 Coe Powered Straightener, 1997 Model: CPPS-PO-225-12, Capacity @ Full Widith: .120 x 2.25"
Diameter rolls
• 12" X .125 x 5000# CWP Cradle Straightener, (2) Available
• 12" x .125" PA Industries Straightener, 1990, Mod SS-127-S, 0 to 900 IPM, 4 Pinch Rolls, 5 Straightening Rolls
• 15” Rowe Str, S/N 5788, Mdl. A15-080, Cap. .020-.080, V/S, Man. Roll Adj.
• 18" x 24" x .150 Feedlease Air Feeder/Straightener
• 24" x 24" x .040 Dallas Air Feeder/Straightener,1998, 24" Max Width ,24" Max Stroke,
.010-.040 @ 24", .090 @ 12", 5 Roll Straightener, Adjustable Height Cabinet, (2) Available
• 24" x .125 Press Room Equipment Servo Feeder, Mod: P325F24-AL, Serial # 0594-056
• 20" Wide x .105 Rowe Servo Feeder, 1993
• 30" Wide x .075 Rowe Servo Feeder, 1991
• 30" x 30" x .125" Coilmatic Air Feeder/Straightner, Mod XCFA 30-30, S/N 0157, Cap .030-.125
• 6,000# P.R.E. PRD366000-Nab Double End Non-Motorized Uncoiler
• 36" x .312 x 15,000# Coe Coil Cradle/ Straightner/Feeder Combination, 1995, Mod CPCFS-500-7, Max Coil
Width: 36", Max Thickness-.312 @ 34", OD 60", 7 Rolls, 5" Diameter Rolls
• 36” x 12” x .105 Dallas Feeder/Straightener, 1994, Mdl. PTS-272, Cap.: .020-.105, 7 Roll Straightener, Single Grip
• 36" X 24" X .070 Coe Air Feeder/Straightener, Model CF400, 1991, (2) Available
• 1,000 Lb. Littell Motorized Uncoiler, Model: 10, 10-22" ID, OD: 48", 16" Mandrel, Motorized
• 2,500 Lb. ASL Uncoiler, S/N 3460, Model 60
• 2,500 Lb. ASL Uncoiler, S/N 24118, Mod. 60, 20” Mandrel, Loop Arm
• 2,500# Coe Double End Reel, 1988, Powered, 24" Wide Material, (2) Available
• 2,500 Lb. Perfecto Non-Powered Double End Uncoiler, Mod 15-4b2500dpr, s/n dr2642-2, Cap 2500# Ea.
Side, Mandrel: 18" Wide, id 16-20", od 60" Electric Brake
• 4,000 Lb. ASL Double-End Motorized Reel, Age: 1993, Model 70, Mandrel: 42”, 16-20” ID, 60” OD, Air Clutch & Brake
• 4,000 Perfecto Non-Motorized Double End Uncoiler, Mod 12-MDB, S/N DR-3540, 14" Mandrel, 16"-20" I.D.,
60" O.D., Electric Drag Brake
• 4,000 Lb. Rowe Cradle Straightener, 1970, .030-.125 Cap. x 20” Wide, 7 Roll
• 4,400# x 15.75" .187 ORII Feedline, 1990
• 5,500 Lb. PA Industries Double End Reel, 1990, Mod DSRA-5500, Non-Powered, 12" wide, I.D. 14.5" to 20.5",
O.D. 55", Man Exp, Air Brake (2) available
• 6,000 Lb. Double End Uncoiler w/Coil Cer, 1995, 36" Wide, Hydraulic Exp. Pwr Rotation
• 7,500 Lb. Rowe Motorized Uncoiler, 1968, Mod. 7580 DS/L, Mandrel: 30", ID: 16"-20",
OD: 60", Motorized, Manual Expansion
• 8,000# Coe Double End Uncolier, 1997, Pull-Off Type, 18" Wide, 60" OD, Hyd Exp. Hyd Threading, Power Indexing
• 8,000 Lb. Dallas Double End Reel, 1998, Non-Motorized, 24" Mandrel, Air Brake, Snubber Roll, Holddown Arm (3) Available
• 8,000 Lb. CWP Servo Feed Line, New in 2003, Capacity: 30"x.125" @ Full Width, Includes Uncoiler, Coil Car,
Straightener, Threading Table
• 10,000# Dallas Powered Reel, 1989, 18" Wide, ID 20"-24", OD 60", Hyd. Exp. Hold Down Loop Control, Keepers
• 10,000 Lb Littell Motorized Uncoiler, Mod 90-30, 1981, Mandrel 30", ID 15"-20", OD 60", V/S, Man Exp.
• 10,000 Lb x 20" Plessey Uncoiler, Mod PR-1810000-NAB, S/N 985-060, 20" Mandrel, 16"-20" I.D. 72" O.D.,
Manual Expansion, Non-Motorized, Pneumatic Brake, Over Arm Hold Down
• 20,000# Coe Powered Reel, Mod CPR20030, 1988, 30" Wide, I.d 19 1/2"-24 1/2", O.D 72", Hold Down Arm,
Loop Control
PRESSES
• 12 Ton Denison Hyd. Press, 1973, Model 120MC
• 15 Ton Perkins Gap Press, 1984, 1.25” Stk, 8” SH, 20” x 10” Bed, 0-500 SPM
• 16 Ton Minster OBI, MOD#2, 2" STK, 9" SH, 17" x 10" Bed, 0-230 SPM, (2) Available
• 16 Ton South Bend Johnson OBI, 1976, Mod 16 FW AC, 1 1/2 STK,9 1/2 SH, 16" x 10" Bed, 175 SPM, Uncoilers
• 20 Ton V & O OBI, 1960, 1" STK, 11" SH, 22" X 11" Bed, 200 SPM, A/C
• 20 Ton Minster High Speed Press, 1974, PM2-20, 1.25" Stk, 0-1000 SPM
• 20 Ton Minster High Speed Press, 1982, TR1-20, .5" Stk, 0-2000 SPM
• 25 Ton V&O OBI, MOD 25 ST, 2" STK, 9" SH, 25" x 13.5" Bed, 80 SPM (2) Available
• 30 Ton Minster Hummingbird High Speed Press, 1980(Rebuilt 1997), Mod HB2-30, Stk 1.26", SH 21", Bed 36"
X 24", SPM 200-1300, Windows
• 32 Ton Minster High Speed Presses, B1-32, 1975-79, 3/4"-1.5" Stk, 0-900 SPM, (5) Available
• 35 Ton Bliss, C-35, 1992, 2.5" Stk, 17" SH, 26" x 18" Bed, 40-80 SPM, Eddy Current Drive, Exc. Cond
• 40 Ton P & H C-Frame Hydraulic Press, Mod OGF-40, 1994, Stk 24", Daylite 30", Bed 30" x 27", Lite Curtains, Exc. Cond!
• 45 Ton V & O OBI, 3” Stk., 12” SH, 32” x 20” Bed, 50-200 SPM, A/C, A/B, Imco Tonnage Monitor - Nice
• 45 Ton Minster #5, 2" Stk, 10.5" SH, 2.75" Adj, 28" x 18" Bed, 90 SPM, A/C, Brake Monitor
• 50 Ton P&H C-Frame Hyd Press, Mod OGF-50,1994, Stk 24", Daylite 30", Bed 30"x27", Lite Curtains, Exc. Cond! (2) Available
• 60 Ton Minster OBI, 1956, Mod 6, Stk 4", SH 13.5", Bed 32" x 21", SPM 90, A/C & Brake
• 60 Ton Bliss OBI, 1956, 3” Stk, 12” SH, 25” x 19” Bed, 90 SPM
• 60 Ton Bliss C-60, 1980, 4" Stk, 14" SH, 32" x 21" Bed, 60 SPM
• 60 Ton Komatsu Gap Press, 1996, 4.72" Stk, 14" SH, 35" x 21" Bed, 42-85 SPM
• 60 Ton Minster OBG, 1962, 2” Stk, 3” Adj. 13.5” SH, 32” x 21” Bed, 120-240 SPM, Very Good!
• 60 Ton Minster Dienamic, 1968, 1.5” Stk, 6” Shut Height, 90-180 SPM
• 60 Ton Minster, 1986, 6" Stk, 14" SH, 32" x 21" Bed, 60 SPM, (4) Available
• 60 Ton Niagara OBI, 1983, 6’ Stk, 18” SH, 32” x 21” Bed, 90 SPM
• 60 Ton Rousselle OBI, Mod 6, 1973, 3" Stk, 12.5" SH, 30" x 18" Bed, 50 SPM, A/C & Brake
• 66 Ton Aida Gap Frame Press, S/N: 00206-3302, 1984, 5.5 STR, 11.8" SH, 48" x 20" Bed, 70 SPM
• 75 Ton Bliss High Speed Press, Mod HP2-75, 3" Stk, 19.5" SH, 60" x 30" Bed, 0-200 SPM, 12" Windows
• 75 Ton Bliss, 1974, 6” Stk, 21” SH, 36” x 25” Bed, 45 SPM
• 75 Ton Bliss, C-75, 1976, 6" Stk, 13" SH, 36" x 24" Bed, 90 SPM
R SH, 51" x 25" Bed, 90 SPM, (2) Available
• 75 Clearing 2-Pt Gap, 1970, 6" Stk, 13.5"
• 75 Ton Minster OBI, 1980, 4" Stk, 14" SH, 36" x 24" Bed, 80-180 SPM
• 75 Ton Niagara
OBI, Mod E-75, 1977, STK 4", Bed 36" x 24", SH 15 3/4", SPM 54, Light Curtains, Cushion
ASSOCIATION OF
MACHINERY
AND
• 100 Ton Bliss
SSDC, 1964,
8” Stk, 20.5” SH, 60” x 36” Bed, 40-80 SPM
APPRAISERS
• 110 TonEQUIPMENT
L & J OBI, 1978,
4" Stk, 17" SH, 38" x 28" Bed, 90 SPM
• 100 Ton LVD SSDC Press, Mod SC2-100T, 1973, Stk: 6", SH 13 7/8", Bed 59" x 31.5", SPM 100, Wintress
Appraisers
Smart
PAC, 18" Windowson Staff
• 110 Ton Bliss OBI, Mod C-110, 8" Stk, 18" SH, 42" x 27" Bed, 40 SPM
• 110 Ton Cincinnati CNC Gap Hydraulic Press, Model: 110-OBS, S/N 46400, Stk: 10", Daylight: 17" Bed 42" x
27", Cincinnati CNC Control w/Light Curtains
• 110 Ton Clearing, 2-Pt OBI, 1970, 6" Stk, 13.25" Sh, 51" x 30" Bed, 90 SPM
• 110 Ton Bliss OBI, Mod C-110, 1978, STK 10", Bed 42" x 27", SPM 40, Cushion
• 110 Ton Federal OBI, 1979, 6” Stk, 18” SH, 42” x 27” Bed, 20-60 SPM
• 110 Ton Niagara OBI, E-110, 1978, STK 5", SH 19.25", Adj 5", Bed 42" X 27", 40 SPM
• 110 Ton Niagara OBI, 1986, 6" Stk, 17.25" SH, 42" x 27" Bed, 54 SPM
• 125 Ton Bliss HP2-125, 1970, 4” Stk, 48” x 36” Bed, 50-100 RPM
• 125 Ton Federal OBI Press, 1984, Stk 2", SH 18.5", Bed 40" X 28", SPM 300
• 125 TON Minster High Speed Press, 1987, PM3, Stk 1.25", SH 15", Adj 2", Bed 48" x 32", SPM: 0-700,
• 150 Ton Minster SSSC S1-33 x 39, 4” Stroke, 20” Shut Height, 50 SPM, 15-1/2 Windows
• 150 Ton Minster, Mod P2-150, 1981, 6" Stk, 23" SH, 54" x 40" Bed, 0-90 SPM, 20" Windows
• 150 Ton Niagara OBI, E-150, 1979, STK 6", SH 18", ADJ 6", BED 50" X 30", 15-45 SPM
• 150 Ton Verson Gap Frame Press, 1971, Stk: 8", SH: 24", Adj: 5", Bed: 84" x 36", SPM: 35, Link Controls, F/S
• 150 Ton V & O OBI, 1980, 4" Stk, 15" SH, 51" x 30" Bed, 70 SPM
• 175 Ton Bliss SSSC Press, Mod S1-175, 1970, 12" Stk, 22" SH, 8" Adj. Bed: 27"x27", 33 SPM, Air Clutch &
Brake, OSHA Controls, Wintress position system, Tonnage Monitor
• 180 Ton V & O OBI, 1980, 3" Stk, 13" SH, 51" x 30" Bed, 70 SPM
• 200 Ton Bliss SSDC Press, S2-200-96-48, 1973, Stk 8", SH 30", Adj 10", Bed 96" x 48", SPM 35-70, 25"
Windows (2) available
• 200 Ton Niagara OBI, 1970, S/N 45637, Mod E-200, 8” Stk, 24” SH, 58” x 34” Bed, 32 SPM
• 200 Ton Bliss, C-200, 1975, 6" Stk, 24" SH, 58" x 34" Bed, 0-65 SPM, OmniLink Controls
• 200 Ton Bliss Press, Mod SC2-200-48-42, 1976, STK 6", Bed 48" x 42", SH: 27", SPM 40-80, F/S, 31" Windows
• 200 Ton Minster, P2, 1978, 6" Stk, 24" SH, 48" x 44" Bed, 0-160 SPM, Quick Die Change
• 200 Ton Niagara SSDC, 1970, 5" Stk, 20" SH, 48" x 36" Bed, 30-90 SPM, 32.5" Windows
• 250 Ton Bliss, HP2, 1965, 5" Stk, 27" SH, 48" x 42" Bed, 0-160 SPM
• 250 Ton Niagara OBI Press, Mod E-250, 1972, STK 10", Bed 59" x 34", SH 23", SPM 32, Cushion
• 300 Ton Minster SSDC Press, 1977, Mod. E2-300, STK 12", SH 33", Bed 84" X 42", 40-80 SPM, Window: 27"
• 300 Ton Minster SSDC Press, 1980, Model E2-300, 10" STK, 30" SH, 6" Adj 96" X 48" Bed,40-80 SPM, 28"
Windows
• 300 Ton Greenard Hydraulic Press, 1987, Model HCTG-300, 10" Stk, 25" Daylite, Bed Size 60" x 36"
• 300 Ton Bliss SSDC Press, 1988, Mod SE2-300, 12" Stk, 44" SH, 12" Adj, 20-50 SPM, Bed Size: 120"x60", Circo PCI100 Controls, 48" Windows, Light Curtains
• 300 Ton K.R. Wilson Hyd. Press, 1980, 12" Stk, 36" Daylite, 48" x 36" Bed
• 300 Ton Verson SSDC Press, Model #S2-300-252-60, S/N 15865, Stk 12", SH 23", Adj 8", Bed & Ram Size: 252"
x 60", SPM 18, Windows--27 3/4"
• 330 Ton Komatsu 2 PT. Eccentric Press, Model E2P-300-2, 1985, Stk 13.77", SH 19.68" (OVER BOLSTER) 98"
X 51" BED, SPM 12 - 25, Windows 48"
• 400 Ton APT Hydraulic Press, 1994, Model: DPA-H-400-25, Stk 19.68”, Open Height 31.5”, Min Closed Height
11.8”, Bed Size: 98” x 51”, Windows 41”
• 400 Ton Greenard Hyd Press, 1987, 12" Stk, 30" Daylite, 60" x 36" Bed
• 400 Ton Blow SSDC Press, 1998, Mod SC2-400, Stk 16", SH 30" (O/B), Adj 10", Bed 108"x48", SPM 12-24, 40"
Windows, L/C, Tonnage Monitor, Hyd. Overloads, Hydraulic Tie Rod Nuts, Die Protection, Brake Monitor
• 400 Ton Danly SSDC Press,1966, Mod S2-400-144, 10" Stk, 28"SH, 144"x48" Bed, 30-60 SPM, 27" Windows
• 440 Ton Komatsu SSDC Press, Age 1992, Mdl. E2G-400, Stk 17.71”, SH 19.68”, Adj. 7.87”, SPM 15-25, Bed
82.67”x 53.14”, Komatsu Digital Controls, 36” Windows
• 500 Ton D & K SSDC Press, S/N P9515, 8” Stk, 15” SH, 144” x 54” Bed, 20 SPM, 51” Windows, Wintress
Smart PAC Controls
• 500 Ton Williams & White SS Hyd. Compression Molding Press, 1993, 26" Stk, 44" Daylite, 48" x 36"
Bed, 1200 IPM, Allen Bradley Controls, Like New, (2) Available
• 600 Ton Minster SSDC Press, Mod: E2-600-132-48, 1978, Stk: 12", SH: 40", Bed: 132" x 48", SPM: 25-50, 36
1/2" Windows
• 600 Ton Blow SSDC Press, 1999, Mod SC2-600, Stk 16", SH 30" (O/B), Adj 10", Bed 120"x60", SPM 12-24, 42"
Windows, OmniLink II LCD Press Control, L/C, Tonnage Monitor, Hydraulic Overloads, Hydraulic Tie Rod Nuts, Die
Protection, Brake Monitor
• 1000 Ton Bliss SSDC, 1979, 14" Stk, 42" SH, 108" x 60" Bed, 18-36 SPM, 44" Windows
FABRICATION
• 7/8" Crown Auotmatic Tube Cutoff, Mod STCOS, S/N M5-30, Cap. 3/16"-7/8", C/O Length: 3"-48"
• 3" Technomatic Engineering Tube Mill, New in 2005, Includes 6,000# Double pay-off, Hyd Shear, Welding Table, Pinch Roll, Hoop Cage Accumulator, Leveler, Strip Entry Guide, 11 Horizontal Stands 70mm shafts, 9 Idler Stands 50 mm Dia., Seam Guide, Welding roll Assembly, Bead Scraper, Bead Winder, Ironing Roll, Cooling Section, 3 Turks Heads, Cut-off Car, Run-out table, Like New, Under Power
• 8' x 3/16" Wysong Squaring Shear, Model: 796, 8' Max. Length, 3/16" Capacity, 24" Front Operated Manual
Back Gauge, Foot Pedal, 7.5 hp, 1955
• 14' x 1/4" Pacific Hydraulic Shear, 1968, Mod: 250R14, S/N: S10333, MAX CAP: 14' x 3/8", 14' 3" BH,
18" THROAT, 48" BG, 20 HP
• 30" DoAll Vertical Band Saw, Mod 3012-j, s/n 147-65822, 30" Throat, Tilt Table, Blade Welder
• Abbey Etna Swager, s/n 1224, Model 106RA, 1” Cap., 2 Die, 6” Die Pocket
• 20 Ton Wysong Hydra-Mech. Press Brake, S/N HPB 19-123, 72’ Bed, 37” BH, 2.5” Stk, 9” SH
• 25 Ton Wysong Mechanical Press Brake, 1978, Mod: 2596, 8' Bed, 6'6" BH, 2" Stroke, 10 1⁄4 Open Height, 24"
Digital Manual Back Gauge
• 80 Ton Omera Fabricator, 1985 Mod. OPRI80-C, .079-394 Cap., 60" x 42" Sheet Size, 41" Throat, Anilam DRO
• 90 Ton D & K Press Brake, 1967, 10’ OA, 8’6” BH, Link Electrics, No BG
• 225 Ton Cincinnati Mechanical Press Brake, 1965, Series 9 Autocycle, 10' OA, 8' 6" BH, 20" Flanged Bed, Air
Clutch & Brake
Miscellaneous
• 20 HP Nelmore Granulator, 1994, 15" x 12" Opening, (3 Available-1 w/ Sound Enclosure)
• 60,000 Lb. Atlas Portable Die Handler, 1997, 108”x90”, Ball Screw Movement, Hyd., Pendant Control
• 5" Union Table Type Boring Bar, S/N: 9570, Spindle 5", Taper: #50, Vert Travel 72", Speed: 4.5-710 RPM, Rotary Table 63" x 55", Built in Facing Head, Outboard Support
• 17" x 120" Southbend "Tornado" Engine Lathe, Model 17, 17" Swing Over Bed, 120" Centers, Taper Coolant, Chip
Pan, 3 & 4 Jaw Chucks, 40-1800 rpm, 2400° k h Huppert Heat Treat Oven, Mod Type st, s/n 1434, 11" w x 8" h x 20"
deep, Electric, 10 Amp
•jlg Electric Manlift, 1999, Mod n40e, s/n 087173-0300040585, Electric Powered, Charger, Height Capacity: 40',
Weight Capacity: 500#
• (5) Ingersoll Rand Portable Air Compressors, 1992-1997, Range -- 825 CFM to 1400 CFM, all in good condition!
TERRY L. BLACKMAN
345 Snowberry Circle • Venetia, PA 15367
Phone 724-942-3382 • Fax 724-942-5194
MACHINERY DEALERS
Website: www.hcimachine.com
Buy / Sell Used • Plastic / Metalworking Machinery
FEATURE OF THE WEEK
1982/2002 Wotan 6” Rapid 4
A
Steal
FOR MORE INFO CALL
Rodney Baker
Scot Abaray
Heath Moore
Lou Langermann
29636 US Hwy 27
Dundee, FL 33838
Phone: (863) 439-6066
Fax: (863) 439-6065
VISIT OUR WEBSITE
www.ABLTechnology.com
[email protected]
On o
u
floo r
r
97 Mazak Integrex 50Y/2000
$309,500
On o
u
floo r
r
1998 Mazak SQT-30MS
$139,500
On o
u
floo r
r
1987 Mazak VQC 15/40
$22,500
Fanuc 18M, 234” x 144” x 28” x 28”,
79” Sq. Rotary, Right Angle Head
$499,900
CNC LATHES
1995 Hyundai Hit-8S, Siemens Control w/ 6” Chuck.............................$25,000
2004 Mazak QT-6TRP w/ Flex GL-6 Gantry, Fusion 640T......................$79,500
2000 Mazak Dualturn 20 w/ GL100C, Fusion 640T.................................$89,500
1996 Mazak QT-25L, Mazatrol, Programmable Tailstock.......................$75,000
1996 Mazak SQT-18MS, T-Plus.......................ON OUR FLOOR..............$69,900
(4) 1989 Mazak Slant Turn 40N ATCMC, Fanuc 11T................................$99,500
1990 Mazak QT-15N, Mazatrol T32-2 Color..............................................$24,500
1989 Mazak QT-28N, Mazatrol T-32-2J.....................................................$44,500
1982 Mazak Powermaster 1600 BB, Fanuc 6TB, 12.5” Bore...............$149,500
1981 Mazak Powermaster 1600 BB, Fanuc 6TA w/ CRT, 9.75” Bore..$139,500
1990 Miyano JNC-35T, 5-Axis, Fanuc OTB.....ON OUR FLOOR............$27,500
1989 Miyano JNC-35T, 4-Axis, Fanuc OTB.....ON OUR FLOOR............$22,500
1986 Mori-Seiki LL8B/2500, Fanuc 11T, Chip Conveyor, 10.2” Hole..$239,500
1997 Nakamura TW-20MM, 6-Axis Lathe, Imca Barfeed, P/C, Chip....$119,500
98 Mazak QT-6T
$34,500
HORIZONTAL MACHINE CENTERS / BORING MILLS
2000 Matsuura ES450 HII, Fanuc18M............................................................................................$99,500
1998 Mazak FH880, Mazatrol M-Plus...........................................................................................$300,000
1984 Mazak H-15B 10 Pallet Changer, Fanuc 6MB, Has 6 Pallets.............................................$19,500
Union BFT-130 Table Type HBM, Heidenhain TNC155, 6.2”x63.3”x43”x33.4”.........................$79,500
VERTICAL MACHINE CENTERS
1998 Daewoo ACE-V35, Fanuc OM,2 Plt Chgr, CTS, Chip Conv...........$49,500
2006 Haas VF-6/40TR w/ Trunion 5th Axis, 40 Pos ATC......................$149,500
1991 Matsuura MC-510V, Yasnac MX-3.............ON OUR FLOOR..........$24,500
1989 Matsuura MC-510V, Yasnac MX-3.............ON OUR FLOOR..........$21,500
1993 Mazak AJV60/160, M32, 5K RPM...................................................$249,500
1990 Okuma MC-4VAE, OSP-5020M.........................................................$29,500
2005 SNK RB4NM, Fanuc 18i-M, Like New.........................................$1,325,000
1998 Wintec DMV-3000, Fanuc 18M, Rigid Tapping.............................$199,500
1982 Mori-Seiki SL-8B
$159,500
MISCELLANEOUS
1997 Imatech ITG 1/150/G, Rotary Grinder w/ Vertical Spindle, Allen Bradley SLC 500 w/ Panel View 500...........................................................$99,500
1994 Kaltenbach SKL-400NA Cold Saw, Programmable Logic Control......................................................................ON OUR FLOOR...................$27,500
Page 22
ryan machine co.
Providing quality machine tools for 25 years
2000 mazak super quick turn
6t With GH6 gantry loading
system, Only 1800 hours
in excellent condition
$59,900
2006 Citizen A-16 CNC Swiss
Style Turning Center
3 rotary tools, subspindle and
lns magazine barfeed.
excellent!
$74,900
Loaded on Truck
2000 kitmura sparkchanger 2xi
cnc vertical machining center
with fanuc 16m, 10,000 rpm
geared spindle, chip conveyor,
indexing style pallet changer
$72,900
loaded on truck
2004 citizen l20 vii cnc swiss
style turning center
With cav barloader, hi pressure
10 line coolant system, chip conveyor, rear drilling block
$159,900
2001 EMCOTURN 332MC
CNC TWIN SPINDLE, TWIN TURRET,
TURNING CENTER WITH FULL C AXIS
BOTH SIDES, PARTS LOADER.
WELL TOOLED
IN EXCELLENT CONDITION.
OFFERED AT $79,900
LOADED ON TRUCK
1994 KITAMURA MYCENTER 1
With 20 atc, 13,000 rpm, rigid tap,
spare M codes, full guarding.
In nice condition
$19,000
LOADED ON TRUCK
2004 haas ec-400 cnc horizontal machining center
in near new condition, all the
desirable options
$104,900
OBO
1991 MItsui seiki vertical
machining center model VS5a,
20" x 40", 6000 rpm, 50 taper, geared
head, fanuc 16m control, In
1995 citizen l20
with 3 rotary tools, indexing,
subspindle, lns mini sprintmagazine
barfeed
In excellent condition
$59,900
excellent condition for its age, this
one's a real metal cutter!
$24,900
1986 RAMBUADI 5 AXIS PROFILER,
80" x 32" x 32" 30 Degree A & B,
DYNapath 9000 cnc control,
probing
$39,900
LOADED ON TRUCK
1996 haas vf-1 cnc vertical
machining center
With chip auger, programmable
coolant nozzle, 4th axis electrics, rigid tapping
$19,900
2000 MATSUURA ES-450II PC2 CNC
HORIZONTAL MACHINING CENTER
WITH 15,000 RPM, "BIG PLUS" SPINDLE,
1 DEGREE, 30 ATC, FANUC 18 CONTROL
IN EXCELLENT CONDITION
$93,900 - loaded on truck
www.ryanmachineco.com • Email: [email protected]
• 408-315-3497 •
Page 23
Page 24
Page 25
e-mail: [email protected]
www.maverickmachinery.com
309-936-7731 •
$59,500
fax :
309-936-7148
P.O. Box 661 • Atkinson, IL 61235
5 Mills
Starting At
$5,950
$2,950
herr-VOSS mini leveler RH, 4HI,
VMLE 22/2.187-17 1/2, 17Roll,
18" Wide, 1994
$8,950
KEARNEY & TRECKER: Model 2H Vertical Mill, 10" x 50" Table, 5 HP, 1450 RPM, 50 Taper,
Tool Hldrs, 1942
INDEX: Model 856 Vertical Mill, 2 HP, Power Table 9" x 46", 75 to 2850 Spdle Speeds, 1968
Fosdick 6' x 15" Hydraulic Radial
Drill, No. 5 Taper, 10 HP, 1406 RPM, Pwr
Elevation, 1942
$5,950
$49,500
STRIPPIT, Super AG 30/30 Earlix CNC,
2 Axis, Control, Tooling, 1989
JET 4’x11”, No. 3 Taper, Spdle Speeds
1985 RPM, 3 HP, Box Table, Vise, 1979
$1,950
#3 Warner & Swasey
Ram Type Turret Lathe, 8" 3 Jaw Chuck,
4 Way Tool Post, 1953
$13,950
NIAGARA BENDING ROLL MODEL 6x48,
Cap.1/4" Mild Steel, 7.5 HP, Air Drop
End, 1968
$8,950
CLEVELAND
75 Ton OBI
Press,
4” Stroke,
60 SPM,
Air Clutch,
36” x 24”
Bed, 1960
$3,950
4L GISHOLT Masterline saddle type turret lathe Built for the united states
navel air material center in 1958 delivered to inspector of naval material,
montebello, ca on dec 1958
new never used
12 1/2" spindle bore, 24" bed extension, cross feeding hex turret with gisholt
jetracer, template mounting, full longitudinal travel, 8" tracer travel,
hyrdaulic 12 1/2" bar feed, 24" 3 jaw 9 1/2" bore chuck, 50 hp main motor, 2 hp
feed motor, 1/2 hp coolant motor
MAZAK AJV-25/404 Vertical Machining Center, 30 ATC, Mazatrol M32 Ctrl, 1998.......$19,500
MAZAK MAZATECH H0400 Dual Pallet HMC, Mazatrol M-32 CNC Ctrl, 60 ATC, 1989.................
...............................................................................................................................$19,500
NIAGARA B78 225 Ton, 10" Bed & Ram, Hurco Back Gauge, Air Clutch & Brake, 1980...............
...............................................................................................................................$29,500
COVEL Model 17PH, 10" x 16" Hyd. Surface Grinder, 6" x 18", Elect. Chuck, 2 HP, 1967.............
.................................................................................................................................$2,950
NATCO G3-24 Spdle, 1 1/2" Drivers, Rect. Head, 22" x 35" inside, 30" x 44" Table, 15 HP, 1977
.................................................................................................................................$5,950
MOLINE HU110, 16 Spdle, 2 1/2" Drivers, Rect. Head 20 1/2" x 38" Inside, 20 HP, 1963...........
.................................................................................................................................$5,950
CHICAGO D&K Power Apron Brake Model 204, 10' 1" Bending Length, 10 Gauge, 5 HP, 1953....
.................................................................................................................................$4,950
VAN NORMAN Model 1R Plain Horiz-Vertical Mill, 10" x 48 1/2" Table, 2000 RPM, 3 HP, 1967....
.................................................................................................................................$3,950
EGAN Press Partner Power Straightener Model S27-815-1, .075" Thickness, 15" Width, 1976..
.................................................................................................................................$5,750
HAMMOND C-4 Chip Breaker Grinder, any Angle Vise, 1/4 HP, Table Travel 6 1/2", 220 Volt.........
....................................................................................................................................$250
KO LEE 618 Manual, 6" x 12" Perm Mag Chuck, 1 HP Spdle, Cabinet, 1986................$2,150
DENISON Multipress One Ton, Model A, Hydraulic, Bench Type, 3" Stroke, (3) from........$1,250
LITTELL Model 308-7 Pdl, Seven Roll Straightener, Cap. .014" x 8", 1963.................................
.................................................................................................................................$1,950
AVEY Type BMA6, Size 34, Single Spindle, 5 HP, Power Feed, Coolant, 1967..............................
.................................................................................................................................$3,950
ACME GRIDLEY 2 5/8" RB6, 5 Slide, Tool Holders, Gears, Chip Conveyor, 1960.........................
...............................................................................................................................$12,500
Grand rapids, Model 36 Hyd. 8" x
24" Surface Grinder, 3 HP, Elect. Chuck,
Coolant, 1947
$6,950
RAND-BRIGHT
De Burring &
Finishing Sander,
15HP, 24" x 60"
Sanding Belt, 24"
1 HP Conveyer
Belt, 1998
$2,450
K O LEE
6” x 12”
Hand Surface
Grinder,
1 HP, Perm.
Mag. Chuck,
Cabinet,
1977
Complete inventory & photos on our website: www.maverickmachinery.com
Page 26
Page 27
6" Giddings & Lewis CNC Table Type
Horizontal Boring Mill
This Machine is in a Pennsylvania Plant and Can Be Seen Under Power.
This Has Got To Be The Nicest Used G&L CNC Horizontal Boring Mill
on the Market Today!!
Specifications:
• New 1999
• Model # H-60-TX
• Table Size: 72" x 168"
• Table Weight Load
Capacity: 80,000 Lbs.
• Table Travel X: 168"
• Vertical Travel of Head Y: 144"
• Saddle Travel W: 91"
• Travel Z Spindle: 60"
• Spindle Speed RPM: 9 to 2200
• Tool Capacity: 100 Tools
• 75 HP Spindle
Machine
Features:
Stand Alone CNC
RotarY Table:
• Numeriprobe In-Process
Gauging with Interface and
Software Including (1) MP3
Reinshaw Probe Head and
(1) Stylus Tool Probe for
Tool Setting, Thermal
Compensation of Z Axis
• Table Size: 72" x 108"
• B-Axis (Contouring): 360,000 Increments
• Rotary Table Capacity: 35,000 Lbs.
Equipped with:
• G&L Numeripath 8000B
CNC Control
(DNC Capable)
• Right Angle Head with
#50 Spindle Taper
• High Pressure External
Flood and Thru Spindle
Coolant System
"The Only Number You Need to Know is
www.7178462600.com....It Will Take You to Our Website."
We Sell Most ALL Machines With
A 30-Day Return Privilege
2023 Black Bridge Rd. •York, PA 17402
Phone 717-846-2600 • Fax 717-845-9497
Email: [email protected] • www.hildebrandmachinery.com.
K
EVIN’S EQUIPMENT CO. (KEC, Inc.)
P.O. Box 3255 • Spring, TX 77383 • Email: [email protected]
Website: www.WeldingEquipment.com
Tel: 713-694-1790 • Fax: 713-694-1791
BUY • SELL • RENT NEW & USED
POSITIONERS
WELD
SEAMERS
TURNING ROLLS
3 Ton - 800 Ton
IRON
WORKERS
PRESS BRAKES
& SHEARS
WELDING
MACHINES
RADIAL
DRILLS
ANGLE
ROLLS
PLATE
ROLLS
We make it easy to sell your surplus equipment. Send us a picture.
We will promptly call you back with our best offer.
713-694-1790
✦ ✦
✦TEL: ✦
Page 29
GOT PROBLEMS?
WE HAVE SOLUTIONS!
Mazak - 2 Avail.
AJV 18N
1990
Reduce your risk when buying a used machine Our 30 year record is impeccable!
Tips on how to reduce your risk at www.msiused.com/ReduceRisk.htm
TURNING CENTERS
Mazak
QT 10
1996
Mazak
FJV 20
1997
Mazak
QT 25L
1998
Hitachi Seiki HiCell 23, 1997, Seicos, 17.7” Swing, 4000 RPM, 2500 RPM Rotary
Hitachi Seiki HT 23J, 2000, Seicos Multi, 17.7” Swing, 25” Centers, 4000 RPM
Hitachi Seiki HT 23SII, 1995, Seicos Multi, 18.1” Swing, 23” Centers, 3600 RPM
Hitachi Seiki HT 23SII, 1997, Seicos, 15” Swing, 24” Centers, 3600 RPM
Hitachi Seiki HT 25G, 1997, Seicos L-III, 24.8” Swing, 24” Centers, 3600 RPM
Mazak Integrex 40 ATC M/C, 1988, T-3, 22” Swing, 40” Centers, 3000 RPM
Mazak Multiplex 620, 1989, T-32-6, 15.35” Swing, 3600 RPM, 3000 RPM Rotary
Mazak Multiplex 620, 1993, T32-6, 15.35” Swing, 4000 RPM, GL100 Gantry
Mazak QT 8, 1987, T-2, 11” Swing, 10” Centers, 4500 RPM, 6” Chuck
Mazak QT 10, 1996, T-Plus, 11.81” Swing, 10” Centers, 6000 RPM, Barfeed
Mazak QT 35N, 1991, T-32-2, 20.08” Swing, 60” Centers, 3000 RPM, 12” Chuck
Mazak QT 25L, 1998, T-Plus, 20.08” Swing, 48” Centers, 3600 RPM
Mazak QT 250, 1999, Fusion, 23.6” Swing, 19.7” Centers, 5000 RPM, 8” Chuck
Nakamura Tome TMC 300C, 1994, Fanuc 16T, 22.05” Swing, 3500 RPM, 3.34” Bore
Okuma LR 10M, 1995, OSP 5020L, 17.32” Swing, 6000 RPM, 6000 RPM Rotary
HORIZONTAL MACHINING CENTERS
Hitachi Seiki HC 400, 1994, Fanuc 18M, 20” x 18” x 18”, 6000 RPM, Full 4th
Hitachi Seiki HG 400III, 1997, Fanuc 15M, 22” x 23” x 20”, 12,000 RPM, 30 ATC
Mazak H 400, 1988, M-32, 22.05” x 18.1” x 20.08”, 7000 RPM, 30 ATC
LeBlond Makino Mazak H 400N, 1992, M-32, 22.05” x 20.08” x 20.08”, 10,000 RPM, 60 ATC
SNC 64
Mazak H 400N, 1994, M-32, 22.05” x 20.08” x 20.08”, 10,000 RPM, 60 ATC
1988
Mazak H 630, 1987, M-32, 6 Pallet, 39.4” x 31.5” x 29.5”, 4500 RPM, 80 ATC
Mazak HTC 400, 1997, M-Plus, 22.05” x 20.08” x 20.08”, 10,000 RPM
Toyoda DM 450, 2005, Fanuc 15M, 17.7” Pallets, 23.6” x 23.6” x 23.6”, 40,000 RPM
VERTICAL MACHINING CENTERS
Hitachi Seiki
HT 25G
1997
Matuura
MC 510V
1987
Toyoda
DM 450
2005
Haas VF 3, 1994, Dual 32 Bit, 40” x 20” x 25”, 7500 RPM, Manual Pallet Loader
Hitachi Seiki VK 45II, 2000, Seicos, 30” x 19.6” x 19.6”, 8000 RPM, 20 ATC
LeBlond Makino SNC 64, 1988, Pro A5, 24” x 15.75” x 15.75”, 15,000 RPM
Matsuura MC 510V, 1987, Yasnac, 20” x 14” x 18.1”, 6000 RPM, 20 ATC
Mazak AJV 25/405, 1987, M-2, 39.37” x 20” x 18.11”, 3150 RPM, 30 ATC
Mazak AJV 25/405, 1992, M-32, Pallets, 39.37” x 20” x 18.11”, 3150 RPM, 30 ATC
Mazak AJV 18N - 2 Avail., 1990, M-32, 22.05” x 16.45” x 15.75”, 10,000 RPM
Mazak FJV 20, 1997, M-Plus, 22.05” x 16.14” x 16.14”, 12,000 RPM
Mazak VTC 16B, 1997, M-Plus,44.09” x 16.14” x 20.08”, 7000 RPM, 24 ATC
Mazak VTC 200B, 1999, Fusion, 44.09” x 20.08” x 20.08”, 10,000 RPM, TSC
Mori Seiki Partner 300L, 1991, MF4-M4, 63” x 19.7” x 18.5”, 6000 RPM, 30 ATC
MISCELLANEOUS
Blohn Precimat 408 Grinder, 1992, Siemens Ergomatic, 36” x 18” x 14.4”
Tru-Tech TT-8000 3-Axis Grinder, 2002, 6” Cross Travel, 3” Grinding Unit
614 E. State Parkway | Schaumburg, IL 60173
ph 847.490.1910 | fax 847.490.8967
www.msiused.com | [email protected]
Page 30
Looking to Sell?
MACHINES NEEDED
Mazak:
H 400N
PFH 4800
Quick Turns, any model 1986 or newer
VTCs, any model, 1995 or newer
Haas:
VF Series, 96 or Newer
lathes - bargain prices
sale - price reduction - sale!
NOW
36” x 78” cc PROGRESS Lathe, Taper, 48” Gap…………….$17,500.00……...$12,500.00
32” x 26’ cc MORANDO Lathe, 1965, 3 ½” Hole………….............$27,500.00……...$17,500.00
32” x 17’ cc TOS, SUS80 Lathe, 1980, Taper…………$29,500.00……...$19,500.00
32” x 160” cc TIMEMASTER Lathe, 4” Hole……………….$19,500.00……...$13,500.00
32” x 120” cc SARO Lathe, 1988, 4 ¼” Hole, Taper…….....$24,500.00……...$17,500.00
32” x 120” cc SCHAERER Lathe, 1969……................................$14,500.00….........$9,500.00
30” x 17’ cc SIDNEY Lathe, 1952, Hardways…………………...$27,500.00……...$17,500.00
28” x 72” cc LeBLOND H.D. Lathe, Taper……………………..$8,950.00………....$6,500.00
28” x 16’ cc AXELSON Lathe, Taper…………………………..$9,500.00………...$13,500.00
28” x 96” cc COVENTRY Lathe, 3 ¾” Hole, Gap…………….....$8,950.00…………$5,500.00
27” x 168” cc AMERICAN Lathe, Taper, Power Rapid Traverse…$17,500..00……....$12,500.00
26” x 96” cc LeBLOND Lathe, Taper, 1975
..…………...$14,500.00…….......$9,500.00
26” x 70” cc WMW NILES Lathe, 1965……………………….$6.950.00…………$4,500.00
26” x 72” cc TUR WAFUM Lathe, 1986, 3 ¾” Hole……………$8,950.00….............$6,500.00
25” x 102” cc LODGE & SHIPLEY Lathe, Taper………………..$12,500.00…….......$7,500.00
24” x 120” cc LANSING Lathe, 4” Hole………………………$19,500.00……….$16,500.00
24” x 120” cc CINCINNATI Lathe, Hardways………………….$8,950.00………….$5,500.00
24” x 96” cc MAZAK HERCULES Lathe………………………$12,500.00………...$7,500.00
23” x 67” cc AXELSON Lathe, Hardways, Taper………………$8,950.00………….$5,500.00
22” x 102” cc LODGE & SHIPLEY Lathe, 1954, Taper…………$12,500.00………....$7,500.00
22” x 96” cc SOUTHBEND Lathe, 1982, 3 ½” Hole, Taper…….$6,950.00…………..$4,500.00
20” x 96” cc MONARCH Lathe, Taper, 1954…………............$12,500.00………....$6,500.00
20” x 72” cc MONARCH Lathe,Taper…………………………..$6,950.00…………..$3,500.00
16” x 102” cc AMERICAN Pacemaker Lathe, Taper…………….$8,950.00…………..$5,000.00
16”x 54”cc LeBLOND Lathe,Taper,1975………………………$4,950.00…………..$3,500.00
16”x 54”ccMONARCH Lathe,Taper……………………………$3,950.00…………...$3,000.00
16”x 54”ccAMERICAN Pacemaker Lathe,Taper,1953………….$5,950.00…………..$3,500.00
Always looking to buy lathes, boring mills & large grinders
46th
Anniversary
(1960 - 2006)
BELMONT MACHINERY COMPANY
An Illinois Corporation • Metalworking Machine Tools Since 1960
911 Sullivan Road, Aurora, Illinois 60506 USA
TEL: 630-844-9288 • FAX: 630-844-9398
e-mail: [email protected]
309-936-7731 •
fax :
309-936-7148
P.O. Box
661
• Atkinson,
61235
P.O. Box
661
• Atkinson,
IL IL
61235
Wanted Wanted Wanted
Do you have surplus machinery to sell?
We are always looking for chip
making and fabricating machinerY
call 309-936-7731 or FAX 309-937-7148
or E-Mail: [email protected]
You can also check us out on the
web at
Thinking about a liquidation,
An Auction? We can Help you
with this also.
Thank you
Bill Ellenwood
Page 32
Page 33
Expert CNC Spindle
Repair, Rebuild &
Retrofit Services
Most Any Make & Model
Belt Driven, CNC, Geardriven & Motorized Designs
Emergency Repair
Services!
Save $100 on Your Next
Rebuild by visiting
www.setcousa.com
Save an additional $100
when you mention #1234
Learn more at
imtgetsresults.com
Western Service Center
5572 Buckingham Drive
Huntington Beach, CA 92649
866-362-0699 Toll Free
714-372-3730 Ph
714-372-3750 Fax
Midwest Service Center
5880 Hillside Avenue
Cincinnati, OH 45233
800-543-0470 Toll Free
513-467-7262 Ph
813-467-7249 Fax
Great Lakes Service Center
41180 Vincenti Court
Novi, MI 48375
877-773-5349 Toll Free
248-888-8989 Ph
248-888-0765 Fax
P resses /F abrication /T ool R oom E quipment
A bsolute A uction • M emphis , TN
06/26/07
10 Path
A.M.
CDT
• I2000
nspection
6/25/07
P.M.Press,
to 41997
P.M.
Bridgeport EZ
2060
Lathe,
Eagle
300 Ton 12
Spotting
Bliss/Minster/Verson/Cleveland/Toledo/Hamilton/V & O/Press Rite Presses to 500 Ton. D & K/Premier/
Steelweld/Cincinnati Press Brakes w/ CNC from 35 - 200 Ton. Wysong 10 x 1/4 Shears. Piranha & Buffalo
Ironworkers. 1994 75 KVA Peer Spot Welders. Whitney/Behrens CNC Punches, one w/ plasma. Dallas/Littell
Feed Equipment. Okamoto 1224DX Nice 1990s Surface Grinder/Reid & Elb Grinders/Bridgeports w/DRO/Lagun
# 3 Mill/ Mori Seiki & Rockland Lathes/ Dake Press/DoAll Band Saws/Angle Roll/ Buffers/Angle Notchers
& Cut Offs/Uni-Punches to 24 inch/Fans/Die Racks/Pallet Rack/Trumpf CNC Tool Holders & Punches/28XX
Tooling/114 Tooling/Miller & Lincoln Wire Welders/Air Compressors/Lawn Mower/Clark & Komatsu Fork Lifts/
Cold Saw/Aero-Go Lift/Sunnen Hone/Atlantic Jig Bore/20 Ft Shot Blaster/Signode 60" Strapper/4 Ft Rosemont
Finisher/Snow 2 Spl. Drill/Denison Presses/Hydraulic Units to 10 H.P./Kaeser Dryer/Punch & Die Grinders/
Bracker Riveters/E-Z Loader 3000 lb. Capacity/Fire Proof Cabinets & Large Safe/Office Furniture/Computers/
Tool room Gauges/Shop Supplies/Welding Curtains/Tubs/Hoppers/Digital Scales/Heat Treat & Draw Electric
Ovens/Large quantity Press brake Tooling/Lots More.
Everything from Forty Year Operation. Bank Letter Required to BID. Proxy & Phone BIDS Accepted. Ten
Percent Buyers Premium. Announcements from Southeastern Auctioneers Day of Sale Take Precedence.
Brochures & Catalog available by June 8th.
Call Don Winslow or Jamie Martin, WMTS, Inc.
Lexington, Tn. (731) 614-1296
[email protected]
Winslow’s Machine Tool Sales Assoc., Inc.
P.O. Box 367 • Lexington, TN 38351 • PH: (731) 614-1296 • Fax: (731) 968-8976
Page 34
Moved to
to Larger
Larger
Moved
120,00 Sq.
Sq. Ft.
Ft.
120,00
Building
Building
1110 Fullerton Road
Page 35
D&D
Buy & Sell Used
Metalworking
Equipment
Industries, Inc. [email protected]
www.danddindustries.com
400 Machines in Stock, or More Available
8501 Royal Birkdale Lane • Holland, Ohio 43528
419-866-6894 • Fax: 419-866-6801
BENDERS
3" EATON Leonard V-B300, Premier 2002 . . . . . . . . $149,500
3" PINES #2 Counterclockwise (2) . . . . . . . . . . . . . . . $19,500
1/2" Eaton Leonard VB50 VE log . . . . . . . . . . . . . . . $12,500
BRAKES
20 Ton Wysong Hydramech 6’ Bed, 2 1/2” Str, 1980 . $7,950
25 Ton WYSONG 8' Bed . . . . . . . . . . . . . . . . . . . . . . . $8,950
90 Ton D&K 10’ Bed, 3” Str, 8’6” B.H. . . . . . . . . . . . . $12,500
100 Ton STANDARD 8' Bed, CNC BG, 2006. . . . . . . . $39,000
CUT OFFS
4" VULCAN Brehm Ultimate Bundle Feed . . . . . . . . . . $89,500
3" ADDISON McKee FM-70TT 2004 . . . . . . . . . . . . . $24,500
BERTOLETTE Model 315 . . . . . . . . . . . . . . . . . . . . . . $5,950
7/8" Crown M5-30t . . . . . . . . . . . . . . . . . . . . . . . . $15,000
1/4-1.75 BERTOLETTE 415 1987 . . . . . . . . . . . . . . . $24,500
FEED LINES
6,600# x 16” x .125 AIDA . . . . . . . . . . . . . . . . . . . . . $14,500
8,000# x 30" x .125 CWP SERVO 2003 . . . . . . . . . . $49,500
10,000# x 30" x.150 MECON SERVO 2004 . . . . . . . . $49,500
FEEDERS
6"x.080 Waddinton Servo Feeder, 2002 . . . . . . . . . . $4,950
18”x24”x.140 Dallas Feeder STR. . . . . . . . . . . . . . . $5,950
24x24x.40 Dallas Feeder, STR . . . . . . . . . . . . . . . . . $6,950
24”x30”x.187 Feedlease FL-5 . . . . . . . . . . . . . . . . . $8,950
36”x12”x.105 DALLAS . . . . . . . . . . . . . . . . . . . . . . . . $8,950
36”x36”x.110 CWP Feeder Str . . . . . . . . . . . . . . . . . . $6,950
FINISHERS
24 Cu ft. AUTOMATED Air Dam . . . . . . . . . . . . . . . . . $17,500
10 Cu ft. Vibratory Finisher w/dryer . . . . . . . . . . $12,500
5" Rand Brite BH-100 . . . . . . . . . . . . . . . . . . . . . . $19,500
52" BURLINGTON Wet Sander, 2 Heads, 1988 . . . . . .$24,500
3/16-2" Shiffer Brush Deburr 94' . . . . . . . . . . . . . $17,500
GRINDERS
8”x18" KENT Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . $4,450
16" x 32" PROTH Hyd Incremental 2005 . . . . . . . . . . $17,500
18 x 60 KENT Hyd. Incremental Down . . . . . . . . . . . . $19,500
#2 MOORE Jig Grinder . . . . . . . . . . . . . . . . . . . . . . . . $9,950
Lathes
17”x120” South Bend 3 Jaw . . . . . . . . . . . . . . . . . $8,950
46”x420” Wohlenberg inch/metric . . . . . . . . . . . $69,500
Air Compressors
125 HP ATLAS Coplo Screw, 459 C FM, 2000 . . . . . . $14,500
PRESSES Gap
60 Ton VERSON 84x30 Bed, 4" Str, 35 SPM . . . . . . . . $14,500
45 Ton STAMTEC 3.15" Str, 40-100 SPM, 1996 (2) . . $23,500
55 Ton AIDA 7.9” STR, 11.8” SH, 70 SPM . . . . . . . . . $14,500
100 Ton VERSON 84 x30" Bed, 8" STR, 40 SPM . . . . $29,500
121 Ton KOMATSU 71 x 28 Bed, 7" STR, 35-70 SPM..$59,500
176 Ton Seyi Sutherland 1996 4" S’; 35-70 SPM,
49"x30" Bed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49,500
220 Ton KOMATSU 94”x33” Bed, 9.8” Str, 19.6” SH, 20-50
SPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79,500
PRESSES SSDC & SSSC
200 Ton Heim 78"x42" Bed, 8" STR, 50-70 SPM,
1996 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79,500
150 Ton BLISS 60x48, 8” STR 40 SPM . . . . . . . . . . . $39,500
150 Ton BLISS 1.25” STR, 17” SH, 42”x36” Bed,
100-250 SPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49,500
150 Ton MINSTER 4”STR, 20” SH, 33x39 Bed, 50 SPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34,500
150 Ton NIAGARA 6” STR, 22” SH, 48x36 Bed,
40-90 SPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $47,500
175 Ton BLISS 27 x 33 Bed, 12"s, 35 Spm . . . . . . . . $34,500
200 Ton BLISS 96"x48" Bed, 8" STR, 30-70 SPM . . . $79,500
200 Ton MINSTER E2 60 x 48 Bed, 10" STR, 0-90 SPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$179,500
275 Ton SUTHERLAND 10” STR, 27” SH, 84x49 Bed, 10-30
SPM, 1992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99,500
300 Ton DANLY 12” STR, 36” SH, 84x48 Bed,
20-40 SPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99,500
300 Ton Minster 84” x 42”, 12” STR, 40-80 SPM . $249,500
300 Ton Minster 96x48, 10" STR, 40-80 SPM . . . $279,500
300 Ton VERSON 72x36 Bed, 10" St, 27" SH, 35 SPM$69,500
300 Ton VERSON 96"x54" Bed, 12" S, 20-40 SPM . $199,500
330 Ton AIDA 98 x 52 Bed, 13" STR, 15-30 SPM, . . $149,500
330 Ton KOMATSU 96x51 Bed, 13.77 STR, 20" SH,
15-25 SPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159,500
400 Ton Brown & Boggs 96 x 48, 12 " STR, 25-50 SPM,
1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149,500
440 Ton Komatsu 17.7” STR, 35” SH, 83x53 Bed,
15-25 SPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149,500
500 Ton BLISS 24” S, 46” SH, 96x60 Bed, 0-25 SPM . $99,500
500 Ton D&K 144x54, 8" STR, 51" windows . . . . . . . $69,500
600 Ton BLOW 120x60 Bed, 16" STR, 12-24 SPM, 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$279,500
600 Ton DANLY 18” S, 42” SH, 96x54 Bed, 10-30 . . $149,500
600 Ton MINSTER 18” S, 42” SH, 108x60 Bed,
10-30 (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$195,000
600 Ton MINSTER 132x48 Bed, 12" Str, 25-50 SPM$479,500
660 Ton AIDA 144 x 63 Bed, 12" STR, 20-60 SPM, . . . . P.O.R.
660 Ton AIDA 120 x 55 Bed, 12" STR, 20-60 SPM . . . . . P.O.R.
Page 36
PRESSES HIGH SPEED
15 Ton PERKINS 1-1/4"S, 8" SH, 0-500 SPM . . . . . . $12,000
30 Ton MINSTER 1.26" S, 200-1300 SPM, 36x24 Bed$39,500
32 Ton MINSTER B1 1.5"S, 10" SH, 0-225 . . . . . . . . $19,500
36 Ton NIAGARA 48”x24” Bed, 3-1/2” St, 11” SH,
75-150 SPM, 1981 . . . . . . . . . . . . . . . . . . . . . . . $22,500
60 Ton BLISS HP2, 36x24, 2” STR, 100-300 SPM
New Elecs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34,500
100 Ton Minster P2, 1.25”STR, 0-450 SPM, 1992 . $99,500
100 Ton VERSON 54”x36” Bed, 4” Str., 45-90 SPM,
14-3/4 SH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29,500
150 Ton minster P2, 60"x42" Bed, 6" ST,
0-100 SPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149,500
PRESSES HYDraulic
2 ton DENISON 3"S, 9" DLO . . . . . . . . . . . . . . . . . . . . $1,500
12 Ton DENISON w/6 Station Rotary Table . . . . . . . . . . $9,950
15 Ton DENISON 4 Post, 19"x27" Between Post . . . . . . $9,950
30 Ton P&H 12"S, C-Frame, 1992 . . . . . . . . . . . . . . . $14,500
40 Ton P&H 18" St, 26" DL, 1987 . . . . . . . . . . . . . . . $24,500
50 Ton P&H 18" STR, 26" DL, 1997 . . . . . . . . . . . . . . $27,500
100 Ton Rogers, 48x48 Bed 20’ STR . . . . . . . . . . . . $19,500
150 Ton DAKE 4 Post, 61x43 Bed, 18” S, 28” D.L. . . . $39,500
200 Ton ROGERS 24" STR, 61x48 Bed . . . . . . . . . . . $29,500
PRESSES Knuckle Joint
400 Ton MINSTER 5" STR, 32x36 Bed . . . . . . . . . . . . $39,500
PRESSES OBI
16 Ton MINSTER 2" S, 9" SH, 0-230 SPM . . . . . . . . . . $6,950
30 Ton HEIM 3" S, Air Clutch, (9 Avail) . . . . . . . . . . . . . . CHEAP
32 Ton FEDERAL 6” S, 14” SH, 60 SPM . . . . . . . . . . . $14,500
35 Ton BLISS 2 1/2” S, 17” SH, 40-80 SPM, 1990 . . . $19,500
45 Ton BLISS 3” S, 12 1/2” SH, 28 x 18 Bed, 90 SPM $16,500
45 Ton minster 3” ST, 13” SH, 120 SPM . . . . . . . . . $17,500
60 Ton BLISS 4” S, 14” SH, 90 SPM (3) . . . . . . . . . . . $19,500
60 Ton minster 6” S, 16” SH, 0-100 SPM (3) . . . . . .$19,500
60 Ton L&J 4” S, 15” SH, 40-90 SPM, new controls . . $19,500
75 Ton DANly 8” S, 21” SH, 40-80 SPM (3) . . . . . . . . $25,000
75 Ton MINSTER 8" STR, 18.5" SH, 30-60 SPM . . . . $27,500
80 Ton FEDERAL 1” S, 17” SH, 0-180 new elecs . . . . $19,500
100 Ton L&J 9” S, 18” SH, 0-70 SPM . . . . . . . . . . . . $29,500
110 Ton NIAGARA 10" S, 35-70 SPM, Cushion . . . . . $29,500
125 Ton FEDERAL 4” Str, 21” SH, 45 SPM . . . . . . . . . $29,500
150 Ton clearing 10” S, 18” SH, 50 SPM (2) . . . . . $25,000
150 Ton DANLY 6” S, 22” SH, 45 SPM, new elecs . . . . $39,500
150 Ton NIAGARA 6" S, 22" SH, 35 SPM . . . . . . . . . . $29,500
165 Ton AIDA 7.8” ST, 15.7” SH, 45 SPM . . . . . . . . . . $34,500
200 Ton NIAGRA W/ E 200 8” STR 24” SH 32SPM . . . $49,500
SAWS
20” Do-All Vertical with Welder . . . . . . . . . . . . . . . . . $1,950
36” Do-All Vertical with Welder . . . . . . . . . . . . . . . . . $3,950
SHEARS
8' x 3/16" wysong, 36" BG . . . . . . . . . . . . . . . . . . . . $9,950
10' x .250 NIAGARA Hyd . . . . . . . . . . . . . . . . . . . . . $19,500
STRAIGHTENERS
36" x .080 ROWE 7 Roll . . . . . . . . . . . . . . . . . . . . . . . $8,950
12” x .125 CWP 7 Roll . . . . . . . . . . . . . . . . . . . . . . . . . $5,950
36" x .250 FEEDLEASE . . . . . . . . . . . . . . . . . . . . . . $12,500
30” x .065 ROWE 7 Roll, 1993 (2) . . . . . . . . . . . . . . . . $9,950
24”x.080 Littell 7 Roll . . . . . . . . . . . . . . . . . . . . . . . $7,950
48’x.060 COE 7 Roll . . . . . . . . . . . . . . . . . . . . . . . . . $14,500
72" x .090 EGAN 7 Roll . . . . . . . . . . . . . . . . . . . . . . . $24,500
72" x .125 CWP 7 Roll Back ups, 1995 . . . . . . . . . . . $49,500
SWAGERS
1” Abbey Etna 106 RA, 2 Die . . . . . . . . . . . . . . . . . . $7,950
2" Abbey ETNA, 2 Die 12" Die pocket . . . . . . . . . . . $12,500
UNCOILERS & CRADLES
2,000# BERTOLLETTE Dbl End, 20" W, 14-20" ID . . . . $4,950
2,000# LITTELL, CRDL Str 8’x.250 . . . . . . . . . . . . . . . $8,950
2,500# LITTELL 18’ W, 16-20 ID . . . . . . . . . . . . . . . . . $2,950
4,000# LITTELL Non MTR Elec Brake . . . . . . . . . . . . . $4,950
4,000# ASL Double End 28’W, 16-20 ID, 60’ OD . . . . . $9,900
4,000# x 20” x .125 ROWE CRDL, Str. . . . . . . . . . . . . . $7,950
5,000# CWP 18’W, 15-20 ID Non Mtr, 1986 . . . . . . . . $6,950
6,000# x36” EGAN 16-20 ID, Mtr . . . . . . . . . . . . . . . . $6,950
8,000# COE 28” W, MTR, 16-20 ID . . . . . . . . . . . . . . . $8,950
8,000# dallas Dbl End, 1997 . . . . . . . . . . . . . . . . . $17,500
10,000# x30" LITTELL Mtr, Hyd Exp . . . . . . . . . . . . . $11,900
10,000# x 48" COE motorized . . . . . . . . . . . . . . . . . . $12,900
20,000# LITTELL , 58’W, 18-23 ID, 72 OD Hyd. . . . . . $22,500
20,000# ASL 39” Wide . . . . . . . . . . . . . . . . . . . . . . . $19,500
WELDERS
75, 150 & 200 KVA Spot Welder w/Unitrol Controller . . . $4,950
35 KVA Tweezer Seam Welder . . . . . . . . . . . . . . . . . . $4,950
WIRE MACHINERY
#3 BAIRD Four Slide 1979 V/S . . . . . . . . . . . . . . . . . $29,500
Pacific K400-10, 10 ft. 400 ton hyd. brake, 8 ft. b.h., 1979
Pacific J175-12 12 ft. 175 ton hyd. brake, 10 ft. b.h., 1992
Pacific J165-12 12 ft. 165 ton hyd. brake, Automec CNC 1000 2-axis CNC, 1978
Pacific 15-14 150 ton 14 ft. hyd. brake, Automec C99 2-axis CNC
Cincinnati 90ASx8 10 ft. 90 ton hyd. brake, Auto Shape 2-axis CNC, 1984
Di-Arco 75-8 8 ft. 75 ton hyd. brake, 2-axis Hurco gauge
Cincinnati #9x10, 12 ft. 225 ton mech. brake, 2-speed autocycle clutch,
Automec CNC 1000 gauge
Wysong 12-50 1/2"x 12ft. mech. shear, 48" power back gauge, 1979
Atlantic HDS-10-1/2 1/2"x 10 ft. hyd. shear, SC7 prog. back gauge, 2003
Beyeler VE-3/8" x 10 ft. hyd. shear, Swissax CNC controls, 1995
Piranha 1/4" x 12 ft. hydraulic shear, 36" back gauge, 2002 Exc. Cond.
Adira QH-0630 1/4"x 10 ft. hyd. shear, blade gap adj., 2003
AFM 1/4" x 10' Hyd. Shear, blade gap adj., 1999
Amada M-2060 1/4"x 6 ft., mech. shear, 1980
Darley 9 ga.x 10 ft. hyd. shear, blade gap adj., 1983
Bertsch 3/8"x 10 ft. init. pinch plate roll, air drop end, D.R.O., Nice
Webb 10 ga.x8 ft. init. pinch roll, air drop end, 1984
Roundo 1/4" x 4 ft. init. pinch roll, 1989
Geka 165S 165 ton hyd. ironworker, hi-speed, 1999
Geka 110A 110 ton hyd. ironworker, hyd. holddowns, 2003
Scotchman 6509 hyd. ironworker, 65 ton, angle shear, notcher "NICE"
Amada OCTO 334 33 ton turret punch, 30"x 40" travel, 8 station, 1983
Euromac 220/6S 8.6"x 8.6"x 1/4" hyd. notcher, variable degree exc.
Marvel V10A, 10" x 10" automatic vertical bandsaw, nice
Scotchman SH1016 10" x 16" mitering bandsaw, 1" blade, 2003
New and Used Press Brake Tooling In Stock!
Numerous other pieces of
fabricating machinery
717-733-4763
Weaver Sheet Metal
5437 Spring Hill Dr. Suite 30 • Spring Hill, FL 34606
Phone (352) 597-9818 • Fax (352) 597-2116
Our Office Hours Are Monday - Friday 9:00 - 5:00
Our Inventory Changes Daily.
FOR SALE
cincinnati
hydraulic press
brake
135 ton x 12', 10'-6"
between housings
$19,500
pacific
hydraulic press
brake
400 ton x 16', 12'-5"
between housings
$35,000
Visit our web site to see
hundreds of different machines
for sale and machines wanted
by other shops.
Please Call 888-597-9818 or
email: [email protected]
www.prefabeq.com
If You Want A Servo...
We Stock New Press Brake Dies
Buy A
Do
For those who demand quality
You
• Smoother surface finish
• Reduced operator fatigue
Need
• Increased productivity
Small
View entire
Precision
Servo Family
Holes?
on our
✓Acute Angle Punches
and Dies
✓Flattening Dies
✓Four Way Dies
✓Offset Dies
✓Radius Forming Dies
✓Rib Forming Dies
✓Die Holders
• Variable speed
website
200-20,000 RPM
• inch or metric
• ww collets .004 to 3/16"
or Albrecht keyless chuck 0 - 1/8"
Optional Equipment
• New Heavy Duty Model
• Taller Column
• Deeper Throat
• Microprocessor quill feed
control
ity
ual
gh Q artner
i
H
A
ls P
Too mpany
Co
✓90i forming Punches
and Dies
✓Gooseneck Punches
✓Press Brake Dies
✓Ram Adapters
✓Safety
Still Made
in America
after 40
years
southern minnesota machinery sales
*Immediate Shipping*
1-800-770-5638
SERVO PRODUCTS Co.
To Locate the Dealer Nearest You, Call
1 800-521-7359
210 S Street • Dodge Center, MN
www. sominn.com • [email protected]
or find us on the web at
www.servoproductsco.com
Reduce coolant usage up to 50% with an OYLBELT Oil Skimmer
Used Machinery Inventory Spring Specials:
Industrial machining processes depend upon cutting oils for
lubrication and cooling. Liberal use of a fluid having needed
lubricity and heat transfer properties is a key requirement
for efficient, high-quality production. Unfortunately,
because they are organic, machines coolants can lose
desirable properties. This is particularly true of the
commonly used water emulsion type coolants. The
fluids can lose lubricating capabilities, become
corrosive to metal parts being manufactured and
give off objectionable odors
• The OYLBELT Oil Skimmer has been
engineered and tested to remove free floating oil
efficiently and inexpensively from water soluble solutions.
• The OYLBELT Oil Skimmer was designed to save you money by
allowing you to get maximum life
from your coolant and washing compound.
• The OYLBELT Skimmer answers the need for an economically priced
oil skimmer.
DAEWOO DMH-400 HMC, 2002
Mazak HTC-400, Mazatrol M Plus, 22" x 20" x 20", 10,000 RPM, 24 ATC, 1 Degree, Thru Spindle
Coolant, 1997
Nicolas Correa FP50/60 5 Axis Bridge Mill, 6000 mm x 2000 mm x 1250 mm, 3110 mm Bet. Columns,
4,000 RPM, Heidenhain 426, 2000 Daewoo Lynx 200B, Fanuc 21T, 8" Chuck, 12 Pos Turret, No Tailstock, 2001
Daewoo Puma 35A, Mits 520 Control, 12" Chuck, 4" Hole, 12 Tools, 1999
Daewoo Puma 230 MS, New: 1999
Okuma L-370W CNC Lathe, New: 2003
Okuma Cadetmate VMC, New: 1995
Okuma MX55VB, U-10M, 41" x 22" x 17", 32 ATC, 50 Taper, Probe, 1999
Mori Seiki Sl-154SY, Meldas 64 Control, Sub Spindle, "C" Axis, 2001
Mori Seiki SL-5H, Yasnac LX-1, 12" Chuck, 30 HP, 2,500 RPM, Tailstock, Chip Conveyor, 1986
Mitsui Seiki VS-3A, Fanuc 15M, 27.5" x 17" x 17", 32K RPM, 60 ATC, 1993
NPF Industries, Ltd.
Toll Free: 800-673-5110
516-484-6660 • Fax: 516-484-6637
E-Mail: [email protected]
Website: http//www.npfindustries.com
Construction of the OYLBELT Oil Skimmer is first class. The metal frame
and housing is powdered-coated for durability. The motor and all moving
parts are enclosed for your safety and years of trouble free use.
The OYLBELT Oil Skimmer uses a proprietary belt, unlike no other belt in
the industry that easily absorbs tramp oils like a sponge.
Various belt lengths are available depending on the application.
COOLANT LIFE IS EXTENDED • LESS PART CLEANING • CLEANER MACHINE TOOLS
• SMOKE IS REDUCED
• Floating oil which collects on coolant not only creates a dirty looking sump but also robs the
coolant of bacteria fighting oxygen.
• Floating oil carried off on parts creates a sticky residue which requires longer washing cycles
to remove.
• Floating oil clings to the machine tool creating a sticky brown film that allows, chips and grit
to cover the machine surfaces.
• Floating oil burns at cutting temperatures producing objectionable smoke and odors. Oylbelt, Inc. - P.O. Box 174 • Ashippun, WI 53003
Tel/Fax: (920) 474-4179 • Email us at : [email protected] Page 37
•
•
•
•
•
•
•
•
Baskets
Boxes
Cabinets
Carts
Casters
Containers
Conveyor
Cranes
•
•
•
•
•
•
•
•
Dock Boards
Hoists
Hoppers
Lift Tables
Motors
Paint Pots
Racking
Tote Pans
Call today for a
FREE catalog
840 Ann Street • P.O. Box 511
Niles, OH 44446
(330) 652-1784 Phone • (330) 652-1667 Fax
www.melmor.com
Jamestown Machinery
2002 Haas SL-30T, 10" chuck, 2.5" bar capacity. 3,400 RPM, 30 HP,
Tailstock, Chip auger, Parts catcher, Tool presetter, more.
2005 Haas VF-2, Trvls 30"x16"x20", 7,500 RPM, 20HP, Rigid Tap,
Chip Auger, Remote Jog Handle, Side-Mount Tool Changer, more.
Haas VF-2's 1997 and 1999 models.
Machines under $20,000
Haas 4-head 5c collet Indexer, Machine four parts at once. Available with or
without control box.
1985 Mazak QT-10N, 8" chuck, Tailstock, tool presetter, Mazitrol CAM T-2
control, 3600 rpm, 8 station turret, extra tooling.
Machines under $30,000
VF-0's: 1996 and 1998 models.
VF-1's: (2) 1996 and (1) 1997 models.
VF-2's: (2) 1997 models.
1994 Haas VF-4, Manufactured in April, 1994. Trvls 50"x20"x25", 15HP,
Rigid Tap, wired for a 4th axis, Programmable coolant, Quickcode, more.
1988 Mazak Slant Turn 25 ATC MC, 6 Live Tool Positions, 10" Chuck,
16.5"x59", 3600 RPM, Tailstock, Tool Presetter, Jorgensen Chip Conveyor,
20 Position Atc, 20 Tool Holders.
Pictures available at: jamestownmachinery.com
Immediate buyers for
VF-0 thru VF-4’s; SL-20 & SL-30 Lathes.
GET A FAIR APPRAISAL OF WHAT
YOUR MACHINE IS WORTH
Phone: (724) 932-2674
To view more machines visit:
www.jamestownmachinery.com
Page 38
Magnetic Drill Stand
Easy-to-use
Magbore Drill
Guides offer sure,
positive, firm
footing for your next
precision drill jobs.
Models now available
for round pipe in 2 styles:
Magnetic for ferrous steel; or
Chain grip for PVC, aluminum
and other non-ferrous
• compact
materials.
special direct
order price $700
(regular $750) see
our website for
specifications &
details
Model
KCD-MN1
(Drill Not
Included)
• lightweight
weighs under 12 lbs.
(19 lbs. wt. drill)
• holds positively
• magnetic holding power
770-lbf on 1" Thick mild
steel
140 West Devon Avenue, Bensenville, IL 60106 USA
PH: 630-860-1545 • Fax: 630-860-9443
www.kanetec.com • [email protected]
Industrial Machine Trader
Classified Marketplace
Miscellaneous
Machinery
Parts
“THE HURCO LADY”
Kearney & Trecker and
Cincinnati
knee type mill parts
#1 thru #6
production, vercipower &
hypowermatic also available
Judith (Judy) Griggs
Specialist in Pre-Owned
Hurco Mills & Machining Ctrs.
Toll Free 888-263-8969
www.hurcolady.com
pa rt s - n - pa rt s
419-331-5658
fax 419-331-2235
complete inventory of used
and reconditioned parts
E-mail:[email protected]
Habcool 318
Miscellaneous
USED MACHINES FOR SALE
Joy 500 cfm reciprocating Air Compressor
MSC 9 x 42” step pulley Milling Machine
Enco 9 x 42” Mill with DRO & power feed
LeBlond Makino 16 x 60 Servo Shift Lathe
Supertec 6 x 18 manual Surface Grinder
Birmingham 14 x 40 geared head Lathe
Standard Modern 15 x 54 Lathe
Whitney-Jensen Model 150 Punch
View actual photos of these
& other machines for sale
on our website:
www.djtoolsupply.com
D & J Tool & Supply, LLC
Knoxville, TN
Toll Free 1-888-546-0744
WE BUY & SELL:
•Ovens - Walk-In, Belt
& Cabinet-Types
•Batch Furnaces,
Vacuum Furnaces
HI-HEAT CO., INC.
32 Glendale Road
South Windsor, CT 06074
www.Hi-Heat.com
CONTACT LEN WERNER FOR LISTINGS
860-528-9315 • FAX 860-528-0421 • Email [email protected]
Call an agent today
(800) 203-9960
Only $3450
WANTED by F.B.I.
(Furnace Brokers Inc,)
Heat Treating
Furnaces & Ovens
Contact: John Bouley
860-875-3712
R
ASSOCIATION OF
MACHINERY AND
Appraisers on Staff
MACHINERY DEALERS
FAX 860-875-1393
www.furnacebrokers.com
H&B Petroleum Company
973-664-0144
http://www.Habcool.com
THE HEAT'S ON...
HI-HEAT COMPANY WANTS YOUR SURPLUS
HEAT TREATING EQUIPMENT AND SUPPLIES.
www.imtgetsresults.com
Problems with
machining of tough
alloys?
For tapping, drilling,
broaching, reaming,
and threading. Dramatic
increase in finish and
tool life.
Miscellaneous
• Buy • Sell
•Advertise
... Your Industrial
Machinery And
Services Online With
Industrial
Machine Trader,
The National
Marketplace To Buy
And Sell New & Used
Industrial Machinery
Page 39
5 UPCO M ING AUCTIONS
JUNE 7
ALL CNC
Charlotte, nc
Bid Live Onsite or live online at Bidspotter.com!
Late Model - Almost New - CNC Machine Shop Including: 2004 Okuma MA400HA High Speed CNC Horizontal Machining
Center with 22" X 24" X 24" Travels; 2006 Okuma Twin Turret "Simulturn" LU400BB 4 Axis CNC Turning Center with 24"
Swing X 50" Centers; 2006 Okuma MA550VB Heavy Duty 4 Axis CNC Vertical Machining Center with 52" X 22" X 22"
Travels; Okuma Howa ACT 2SP-3 Twin Spindle CNC Chucking Center (Completely Rebuilt by Infinity in 2006); 2005 Brown
& Sharpe Global CMM; 2004 Amada HA250A Automatic Horizontal Bandsaw and Other Machine Shop Equipment.
JUNE 14
ANCHOR DANLY
MULTIPLE LOCATIONS
INTERNET AUCTION SALE – ALL BIDDING WILL BE EXCLUSIVELY ONLINE
Surplus to Ongoing needs
Fabricating and Machine Shop Equipment. 8 LOCATIONS INCLUDING: BEAVER DAM – Clark 3000 lb Forklift; Approx (140) assorted
stackable steel tote bins; Approximately 325 Linear feet of Maintenance Crib fencing; Scales; Footburt Hammond 7” x 18” Hand Feed
Surface Grinder; Pallet Jack; Torit Dust Collector. ITHACA – 1997 Schaffer 66” Rotary Surface Grinder; Danly Radial Arm Hone; Sunnen
Hone; MAS & Cincinnati Radial Arm Drills; Custom 2-spindle drilling / tapping machine. Danly 50 Ton C-Frame Hydraulic Straightening Press; Abel Howe 3-ton Jib Crane; Surface Plates; Cable Hoists. CLEVELAND – Ooya Radial Arm Drill; GRAND RAPIDS – Info to
Come; MISSISSAGUA, CANADA – Shibura 5” Horizontal Boring Mill; Blanchard 60” Grinder; 1998 Chen Ho CNC Vertical Machining
Center; Lucas Horizontal Boring Mill; 1995 Esab Burning Machine; Mills; Drills; Lathes; Saws; Grinders, Offices and Workstations, etc;
TILLBURY CANADA – Hydraulic Straightening Press; 40 Position Tool Changer, Archdale Radial Arm Drill; WINDSOR CANADA – Esab
Torch; G&L Horizontal Boring Mills; Lucas Horizontal Boring Mill; CHICAGO – (2) Cincinnati Milacron 400H CNC Horizontal Machining
Centers
June 21
Assets surplus to the ongoing operations of SMT
INTERNET AUCTION SALE-ALL BIDDING WILL BE EXCLUSIVELY ONLINE
Late Model Metal FAB Shop with (3) Straight Side Presses Including 1985 330 Ton Komatsu S.S.D.C. Press with Feed Line,
43" X 72" Bed, Niagara 250 Ton With 42" X 60" Bed, 300 Ton Verson with 48" X 132" Bed, Late 1990'S ABB ESAB MIG
Welding Robot, (3) Spot Welders from 50-200 KVA, 37" Time Saver Sander, (3) Amada Pega 357 CNC Turret Presses, (2)
Pacific J225-12 Hydraulic Press Brakes, 110 Ton OBI, Also Optical Comparator, Mori Seiki SL-2 CNC Chucker, Bandsaws,
Deburring & Finishing Machines, Grinders, Racking and Milling Machines
JUNE 22
Surplus bottleD water equipment
Chicago, IL
INTERNET AUCTION SALE – ALL BIDDING WILL BE EXCLUSIVELY ONLINE
Late Model Plastic Injection and Blow Molding Equipment Including: B&G Blow Molder model XT-4, Trayformers, Bottle Rinsers,
Air Compressors, Conveyors, Gravity Fillers, Pumps, Labelers, Pressure Meters, Tote Dumpers, Palletizers, Cooling Tower, Stretch
Wrappers, Tanks, Unscrambler. B & G Products Blow Molder, model XT4; SWF Automatic Hot Glue Tray Former, model IT4; (2)
2000 BFT Automatic Inverted Bottle Rinser, model HSWC-15; ID Technology / Macsa Coder Laser, mfg 2003; 2002 Gardner Denver
Reciprocating Air Compressor, model VH9H3N; Gardner Denver Ltd Model RHP0500 Compressed Air Dryer; 2001 Gardner Denver
Reciprocating Air Compressor, model VH9H3N; Hankison Intl Model HPRD 1.5-700 Compressed Air Dryer; (2) BFT Table Top Conveyor;
Roller Conveyors; 2000 Filler Specialties 30 Head Rotary Gravity Filler, model AWFS3010R; Arida Sand Separator; (3) Tri Clover
Centrifugal Pumps; (2) Krones Automatic 18 Head Rotary Hot Glue Labeler, model CANMATIC 18; Olympic Hydraulic Bailer; Storage &
Tote Dumpers; Pacific Ozone Pressure Meter, model SGA23; Recold Cooling Tower, model MW30B; etc. Full Details Soon!
JUNE 26Distel Tool & Machine Co
Warren, MI
Bid Live onsite or live online
Complete Tool & Die Facility Featuring: CNC Gantry Type Mills, Duplicating & Millling, CNC Floor and Table Type Horizontal Boring Mills,
Manual Floor and Table Type Horizontal Boring Mills up to 6” capacity, Planer Mills, Double Action Tryout Presses up to 1500 Ton,
Single Action Tryout Presses up to 1000 ton, Spotting Press, Tremendous amounts of Boring Mill Accessories including angle plates,
rotary tables, tooling, riser blocks, cast iron layout tables, Drills & Radial Drills up to 6’ x 19”, Mills, Surface & Rotary Surface Grinders,
Lathes, Saws, Shears, CMM’s, Inspection, Trucks, Forklifts, Bridge Cranes up to 40 ton, Air Compressors, Welding, Miscellaneous, etc.
w w w . a s s e t - s a l e s . c o m
Asset Sales, Inc.
auctioneers * liquidators * appraisers
www.asset-sales.com • [email protected]
Corporate Headquarters: 301 Post Office Dr. Suite C
Indian Trail, NC 28079
Toll Free 888-800-4442 * 704-821-4325 Fax
www.goindustry.com
ASC Corporation Plant Closure
Over 1,500 Lots of
Metalworking Equipment
& Machine Tools
Location: 9804 Reisterstown Road
Owings Mills, MD 21117
Sale Date:
THURSDAY, JUNE 21 AT 9:00 AM EDT
Sale Details: Mori Seiki 12” Bore CNC Lathe • Okuma
LU35 • CNC Turning • Okamoto/Line CNC Horizontal
Boring Mill • Monarch & American Lathes • Matsuura
& Mori Seiki Horizontal & Vertical Machining Centers
• Bridgeport Vertical Milling Machines • Sip & Bendix
Coordinate Measuring Machines • Cincinnati Press
Brakes & Horizontal Boring Mills • Blanchard Grinder
• Presses • Band Saws • Raw Materials • Welders •
Grinders • Forklifts • Cranes • Plant Support Equipment
& Much More!
Inspection: Wednesday, June 20 from
10:00 AM to 4:00 PM EDT
For more information visit our website at
www.goindustry.com & search: ASC Corporation
Contact: Susie Springer
800-722-3334, Ext: 234
[email protected]
UPCOMING AUCTION
THISTLEWOOD TIMBERFRAME
Tuesday June 5th - 10:00AM
PREVIEW: Monday June 4th, 9AM - 5PM
LOCATION: R.R. #6, Thistlewood Rd., Markdale
FORKLIFTS • INVENTORY • BANDSAW MILL
• PARTIAL LISTING •
$1,400,000 In Timber & Lumber Inventory
Available for Prior Sale: Len Class, Bunkers, Brace
Stock, Barn Hand & Hewn, Non-Sturctural, Farm
Machinery Stock, Taiku, Tar Planks, Spline Stock •
Portable Bandsaw Mill: 2000 Enercraft 36"
horizontal, 24' long track p/w Kabota 40 hp four
cylinder • Forklifts: Massey Ferguson MF-6500 •
Loadlifter 4400 10,000 Ton • Hyster • Case • Cat •
Mitsubishi • Plus Saws • Sanders • Drills • Etc.
Contact Odd @ 800 263-1469 for More Info
VISIT OUR WEBSITE @ www.danburysales.com FOR DETAILS
• AUCTIONEERS
• APPRAISERS
• LIQUIDATORS
FOR FURTHER INFORMATION CALL: 1-800-263-1469
ALL SALES SUBJECT TO BUYER’S PREMIUM
Metal Working Equipment Auction
Monday, June 11, 2007
9:00 A.M.
375 Charmony
Frontage Rd.
Sterling Co., 80751
- Office Equipment Intelti fax machine- (7) 4 drawer file cabinets- office desks- (2) computer centersGBC Notebook Binder- Bissell vacuum- lots of paper & pens etc.- RCA 13” t.v.- (2)
long 4 drawer file cabinets- 2 drawer file cabinet- (2) sets of lockers- misc. chairslots of coats & t shirts
- Shop Equip. & Machines TOS Trencin SN 50C lathe KBC model M 22R8- Gates PC 707 Hyd. hose crimper- parts
washer- Curtis Ind. Upright air comp.- RD 750 radial arm drill- large homemade metal
press- Edide lead/acid battery charger- Hyd. metal stand roller- ESAB pattern torchMiller Delta weld 450 wire feed roller- single axle trailer 4x8- Ellis bandsaw- Miller
XMT 304 cc/cv Miller 60 series wire welder- air paintshaker- Industrial paint storage
cabinet- Alkota 2162 steam cleaner- elect. hyd. cherry picker- Miller Deltaweld 450
Millermatic 30 wire welder- Scotchman 9012 shear & punch- air powered hyd. lube
center w/ large storage tank- electric hyd. barrel pumps- Victor torch set & cart- Delta
450 millermatic 30E parts- several metal jigs- stands & racks- lots of scrap iron-VehiclesPeterbuilt semi tractor- GMC semi tractor- (2) IHC semi tractors- junk mack engine
& stand- Elpar elect. crane (batteries shot) - Inland Hayliner 4000 bale trailer- Toyota
Forklift & attachments
This will be a very nice auction with a lot of big metal working equipment.
For more information see website at www.sterlinglivestock.com
Sterling Livestock Auction Service
970-522-1950
Jim 970-520-3047 or Jason 970-520-3049
Page 41
PUBLIC AUCTION
105,000 SQ. FT. MFG PLANT & REAL ESTATE • Complete Liquidation of Starr Industries, Inc.
Rolling Stock, Material Handling Equip. • 2 Product Lines - Aluminum & MFG. Equip
Wed., June 20, 2007 - 9:30 AM
Location: 87 Taylor St. • Quincy, MI 49082
2 Blocks South of US Rte 12 on Berry St, Turn West onto Taylor St. to Auction Site
REAL ESTATE: 105,500 SqFt MFG. Plant w/3 enclosed truck dock areas, 400 Amp,-480 Volt 3-Phase Power; 14’-16’ Ceiling, Warehouse Area, Heated Production Area,
All Public Utilities. 4 Main Areas : Masonary Constructed 56,658 Sq.Ft. w/Production Warehouse and Office Area. Also Masonary 39,660 Sq.Ft. Production area . 50’x60’
Storage Bldg . and a 63’x95’ Warehouse Bldg w/ dock area. Approx 3.5 Acres of land offering ample parking & easy access to the building with ground level doors. Good
location just off US Rte 12 Close to I-69 & 80-90. FOR MORE INFO OR APPT. TO VIEW CALL THE AUCTION CO.
TERMS OF REAL ESTATE: 10% Down day of sale. Balance at Closing.
VEHICLES & TRAILERS & FORKLIFTS: ‘03 Freightliner Sprinter Van, Mercedes Engine, 141,235 Miles • ‘01 Ford F350 Lariat SD Diesel Crew Cab Pickup Trk, Dually • ‘01
Dodge Grand Caravan • ‘01 Dodge Ram 2500 Diesel Pickup Trk • ‘99 GMC 2500 Series SLT ¾ T Ext. Cab Pickup Trk • ‘98 Dodge Laramie SLT Diesel Pickup Trk, ¾-T • ‘96
Dodge Laramie SLT, Ext Cab, 9’ Steel Flatbed • ‘94 Mitsubishi 16’ Flatbed • ‘91 Dodge D-350 Pickup • ’89 Dodge Stake Bed • ‘87 IH Stake Trk Cab & Chassis • ‘03 Legend
Tandem Axle Enclosed Van Trailer, All Aluminum Like New • ’00 Four Star 34’ Tandem Axle Beavertail Trailer • ‘00 Four Star/Interstate 30’ Tandem Axle Flatbed 5th Wheel •
‘99 US Cargo Tandem Axle Enclosed 14’ • ‘98 Tandem Axle Flatbed Trailer 24’ • ‘96 Starr Snowmobile Trailer 10’ • ‘93 Doolittle Enclosed Utility Van Trailer 14’ • ‘92 Tandem
Axle 20’ Flatbed 5th • ‘84 TG Drop Deck 48’ Single Axle • Starr HD Alum. Tandem Axle 14’ Snowmobile Trailer • 5000# Towmotor TGP25K-LP Pneumatic Tire, LP Forklift
Trk, Mfg ’04, 3-Stage Mast • 8000# Caterpillar V80D Cushion Tire Forklift • 2500# Forklift Hyster Short Mast, 2-Stage Electric • Lots More
PRODUCT LINE: Alum Docks & Boat Lifts Includes some inventory, die & punches, prints & customer list • EQUIPMENT: 25 Ton x 10’ Dreis & Krump Mdl.265 Press Brake
• 10’ Bed • 36 Ton x 8’ Dreis & Krump Mdl.68-B Press Brake • 10’ Dreis & Krump SBA-104 Speedibender Pwr.Leaf Brake • ‘96-2.2 K.W. Nantong Vert. Knee Type Turret Milling
Machine • 60-Ton Bliss 21-1/2 Mechanical O.B.I. Press • 20” Clausing Var. Spd .Drill Press • Toledo O.B.I. Press • 30-Ton Heim 3A O.B.I. Press • 10” Baldor Buffer • 75-Ton
L&J No.7 O.B.I.Press • (2) Bench Mark Hot Melt Glue Guns • (2) Lift Tables Autoquip Series 35, Electric Scissor Lift Die Lift Tables • SM No.1A O.B.I.Press • 2 & 6 Spindle
Clausing Gang Drill Press • 40-Ton Walsh O.B.I. Press • Warren No.3W O.B.I Press • 12” Enco Table Saw • 6”x18” Reid Surface Grinder • 13”x40” Morton Mdl.1340 Geared
Head Engine Lathe • Metal Work Bench • Bench Grinder • Hammond 12”/2” Combination Disc/Belt Sander • Toledo 150 x .05Lb. Digital Scale • 1000# Toledo Platform Scale
• Ingersoll Rand Horiz. Air Compressor 120-Gal , 28HP w/Van Air Refrigerated Air Dryer • 30 H.P. Gardner Denver Rotary Screw Air Compressor • Various Drill Presses •
15HP Emglo Vertical 2-Stage Reciprocating Air Compressor 160-Gal • H Frame Pneumatic Press • Signode Mdl-MS-T Automatic Strapping Machine • 105-Ton Verson O.B.I.
Press, Mdl-7-1/2 • Chicago D & K Size 3H2 • Bander Strapper Units • Perishable Tooling • Toledo Pipe Turner • Greenly Conduit Bender
MISC: Wire Baskets • Roller Conveyors & Stands • Asst’d. Hand & Pwr. Tools • (95) Asst. Size Uni-Tools • Cantilever Racking • Pneumatic Tools, Cordless & Power of Various
Types • Large Asst. Plant Support Equip Incl. Maintenance Items • INVENTORY: Lge Asst. Alum Stock, Metal Etc • Completed Boat Lifts • Winches, Lifts, Cables, Fasteners
• Wheels 42” & 24” & 30” • C-Channel Square & Rectangular, Box, Tubing Various Sizes • WELDING EQUIPMENT: Miller CP w/Miller Radiator 1A Cooling System, Miller
XR-Edge Extended Reach Feeder • Several Miller CP200 • Linde VI-252CV • (2) Miller CP-252TS • (4) Miller Syncrowave 250 • (2)Miller CP302 • Miller CP250 • LOT: Miller
Radiator 1A Cooling System • (2)Miller XR-A Air Cooled Wire Feeder; Miller Extended Reach Wire Feeder • Lincoln 225 Amp • Oxy Acetylene Torch Set • Lincoln Procut 60
Plasma Cutter & Lots More • SAW DEPT: SOSCO 12” MC350N/FA Manual Chop Saw, 12” Blade, w/Feed & Exit Tables • Northfield Unipoint Radial Arm Saw • Kaltenbach
SKL400NA Automatic Cold Saw 1996 Auto Feed, Rebuilt 2002 Low Hrs Like New, Clamping Vise, Blade Lubricator, 13’ • Feed Conveyor, 80” Conveyor • ’94 FOM Mdl-SP55
Cold Saw, 20” • ’01 Emmegi SCA550 Auto Cold Saw • 10” Rockwell Unisaw Tilting Arbor Table Saw • 12” Delta Radial Arm Saw • 12” Enco Table Saw • 10” Milwaukee Mitre
Saw • OFFICE EQUIPMENT & MISC: Computers • Desks & Work Stations • Files • Tables • Chairs • Shelves & Cabinets • & MORE
Terms: Cash, check accompanied by bank letter of payment or Visa or M/C. A 10% buyer’s premium is added.
SELLERS: STAR INDUSTRIES, INC.
WILSON AUCTION & REALTY CO., LTD.
825 N. Main St. Bryan, OH 43506 / 419-636-5500 • 241 S. Main St., Bowling Green, OH 43402 / 419-354-7653
Toll Free: 866-870-5500 • Auctioneers: Wayne M. Wilson CAI • www.WilsonAuctionLtd.com
Page 42
Page 43
Page 44
Page 45
Since 1888
200 South Harrison • Aberdeen, SD 57401
605-225-5820 • Fax: 605-225-7267
Email: [email protected] • www.kolee.com
K.O. LEE C13PC2
Cylindrical Grinder features a heavy
duty grinding head. In addition, a one
piece cast iron base assures rigidity
and vibration free grinding. Saddle
ways are double “V” for maximum
stability and are fully protected. The
two axis NUM AXIUM POWER®
PC based control uses Microsoft Windows operating system, programs,
generated on the control and can either be stored on the hard drive or on
the customer’s network drives.
K.O. LEE S3818PC3
3 Axis Slicer & Dicer offers
a work table of 8” x 19”.
Spindle speeds of 1725 to
7200 RPM are controlled
by a variable frequency
drive to suit your production needs. The S3818PC3
has a 40 gallon paper filter
coolant system and a spray
hood that provides protection
for your work environment.
The S3818PC3 has programmable Downfeed, Crossfeed,
and Table controlled by a
NUM AXIUM POWER®
PC Control.
Page 46
IN F I NI T Y
R EBU I LD
"exclusive Okuma Rebuilder"
Okuma LC-40 with New Windows
PC base Okuma (THINC) Control
Control retrofit includes: New Okuma P100 Control and all new Axis drives and
motors;
New Spindle Bearings; Bed, saddle, and cross slide ways reground; new gibs,
wipers, lube meters;
All new Ballscrews; New Electrical Enclosure; All New Electrical Hardware; All new
wiring and cabling
Rental Machines Available • New OSP Available
Call 704-588-4995 • Fax 704-588-5268
Visit our Website at www.infinityrebuild.com
Magnetic Drill Stand
Easy-to-use Magbore
Drill Guides offer sure,
positive, firm footing for your
next precision drill jobs.
special direct order
price $700 (regular
$750) see our website
for specifications &
details
Models now available for round pipe
in 2 styles: Magnetic for ferrous steel;
or Chain grip for PVC, aluminum and
other non-ferrous materials.
• compact
• lightweight weighs under 12 lbs. (19 lbs. wt. drill)
• holds positively
• magnetic holding power 770-lbf on 1" Thick mild steel
Model: KCD-MN1
(Drill Not Included)
KanEtec — Magnetics To Increase Productivity
■
■
■
■
■
■
■
■
■
■
■
Electromagnetic Chucks
Permanent Magnetic Chucks
Magnetic Bases
Magnetic Tools
Magnetic Holders
Lifting Magnets
Magnetic Blocks
Sheet Separators
Drill Stands
Magnetic Coolant Separators
Full Magnetic Product Line
www.kanetec.com
140 West Devon Avenue, Bensenville, IL 60106 USA
PH: 630-860-1545 • Fax: 630-860-9443
Toll-Free: 1-800-959-0449
E-Mail: [email protected]
Presorted Standard
U.S. Postage
®
P.O. Box 1415 • Fort Dodge, IA 50501
Change Service Requested
A Heartland Industrial Group Publication
CALL TOLL FREE! 800-203-9960
FAX NUMBER 515-955-3753
Website: www.industrialmachinetrader.com
PAID
Permit No. 376
Spencer, Iowa 51301

View Full Document - Industrial Machine Trader

Transcription

Similar documents

6th - Industrial Machine Trader

Online Auction - MyEquipAuctions.com

10th - Industrial Machine Trader

Oct - Industrial Machine Trader

March 7, 2006 - Industrial Machine Trader

Catalog

Emscherumbau Holtener Bruch

High-Speed Parallel Twin-Spindle CNC Lathe

Brochure - Infinity Asset Solutions

The Evolution of a Demon Deacon - School of Divinity