Seaview Brochure

Products Distributed By
www.coursemaster.com
MODULAR MOUNTS
Seaview modular mounts are a simple
3 step process to build. STEP 1 is to select the mount style and height you want.
STEP 2 Choose the correct top plate for
your mount based on your specific marine
electronic. STEP 3 select a light bar and
other optional accessories.
STEP 1: Choose Mount Style & Height
Single Mounts
These Aft Leaning mounts are all light bar compatible.
Note that a Top Plate is required to mount your marine
electronic. Refer to STEP 2 for Top Plates.
Please contact Coursemaster for additional mount styles
and sizes.
PART #
DESCRIPTION
PMA-57-M1
5” Aft leaning mount. Will work with closed dome
radars, open array radars and satdomes
PMA-107-M1
10” Aft leaning mount. Will work with closed
dome radars, open array radars and satdomes
PMA-1210-M2
12” Aft leaning mount. Fits 16” - 24” diameter
satdomes only
PMA-1810-M2
18” Aft leaning mount. Fits 16” - 24” diameter
satdomes only
Dual Mounts
These Dual Mounts are all light bar compatible. Note that
a Top Plate is required to mount your marine electronic.
Refer to STEP 2 for Top Plates.
Please contact Coursemaster for additional mount styles
and sizes.
PART #
DESCRIPTION
PMA-DM1-M2
12.5” dual mount pre-drilled for most closed
dome radars. Top for satdomes
PMA-DM2-M2
23.75” dual mount pre-drilled for up to 4.5’ open
array radars. Top for satdomes
STEP 2: Select a Top Plate
Top Plates
Seaview Top Plates are required for all Seaview Modular Radar
Mounts. Made from UV stable white ABS with internal anodized
aluminum plate pre-drilled to match your electronics
Please contact Coursemaster if you do not see your electronic devices
FITS MOUNT PART
NUMBERS ENDING IN:
PART #
DESCRIPTION
ADA-R1
For closed dome radars & open
array radars
M1
ADA-R2
For Furuno open array radar,
JRC 24” radomes, Lowrance LRA
2400HD, Northstar 24” radomes,
Oyster 50S, 2Simrad 24” radomes
M1
ADA-S1
For KVH M1/M2/M3, Intellian i1/
i2/i3, Raymarine 33/37STV
M1
ADA-S2
KVH M5/M7, Intelllian i6/s6,
Raymarine 45/60STV
M2
ADA-F1
For cameras or search lights
M1 or M2
STEP 3: Select Light Bars & Accessories
Light Bars
Seaview Light Bars are compatible with all Seaview Modular
Mounts. Light Bars do not come with lights. Refer to the Light
Bar Tops section.
PART #
DESCRIPTION
LTB-R
Light Bar for closed dome radars
LTB-S
Light Bar for 18” diameter or smaller satdomes
LTB-S24
Light Bar for 18” diameter or larger satdomes
LTB-OA
Light Bar for 4½’ or smaller open array radars
LTB-SF
Light Bar for cameras or search lights
STEP 3 continued onto the next page
Light Bar Tops
Light Bar Tops for Seaview Light Bars. Seaview Light Bars do
not come with lights.
PART #
DESCRIPTION
LTB-U
Standard 1-14 thread for GPS or similar
LTB-U1A
Universal Light Bar Top for mounting your own light and
or GPS
LTB-BOX
Universal box top for all around, masthead & stern
lights (lights not included)
PM-U2A
Allows you to mount a single light and two GPS units
Spreader Kits
Seaview Spreader Kits allow you to mount additional GPS
units or antennas to your mount. Comes with all the mounting hardware required. Please note that there are two different sizes of Spreader Kits depending on which Seaview
mount you have. Refer to the chart below.
PART #
DESCRIPTION
SP1-MOD
Spreader Kit for radar or satdome applications. Fits
modular mounts part numbers ending in M1
SP2-MOD
Spreader Kit for radar or satdome applications. Fits
modular mounts part numbers ending in M2
Base Wedge
Wedges for the base of your Seaview mount.
PART #
DESCRIPTION
PM-W4-7
4° wedge for 7”x7” radar mount base plate
PM-W4-10
4° wedge for 10”x10” radar mount base plate
CAMERA & SEARCH LIGHT MOUNTS
Seaview Camera and Search Light Mounts are the ideal
solution for anyone who needs to mount a search light or
camera to their boat. These mounts have a small foot print
allowing for optimum space saving.
PART #
DESCRIPTION
PM5-FMT-8
5” vertical, 8” round base for FLIR M-Series or
Raymarine T-Series
PM5-FMD-8
5” vertical, 8” round base for FLIR MD-Series or
Raymarine T200
FTDR-2
1½” tall, 8¾” round base for FLIR M-Series or
Raymarine T-Series
FTDR-3
1½” tall, 7¾” round base for FLIR MD-Series or
Raymarine T200
LOW PROFILE SATDOME MOUNTS
Made from marine grade aluminum these Seaview satdome
mounts leave behind a small foot print. Increase the performance of your satdome with these mounts. Add an adjustable wedge for increased performance!
PART #
DESCRIPTION
AMA-16
2¾” tall, 8” round base for KVH M2 / M3 / V3, Intellian i3,
Raymarine 37STV, Sea King 1500HD, SeaTel ST14
AMA-18
2¾” tall, 8” round base for KVH M5, Intellian i4, Raymarine
45/60STV, SeaTel ST14
AMA-24
5” vertical, 8¼” round bas 2¾” tall, 8” round base for KVH
M7, Intellian i6, Raymarine 60STV, SeaTel 24
AMA-32
4” tall, 8½” round base for Geonav SC90 / TV90, Intellian
i9 / k9 / s85, KVH M9 / F77 / FB500 / V7, SeaTel C30 /
3004 / USAT30 / DTV04
AMA-W
Adjustable wedge (0-12°) for low profile satdome mounts
DIRECT MOUNT WEDGES
The Seaview 4° wedge is pre-drilled. To be used when no additional mounting height is necessary, the wedge is mounted
directly between the mounting surface and radar antenna.
PART #
DESCRIPTION
RW4-1
For most 18” Furuno, Sitex, Lowrance, Simrad & Koden
RW4-2
For Raymarine, Garmin, 3G, 4G & BR24 closed dome radars
PART #
DESCRIPTION
SLM-1S
Self leveling mast mount kit for almost all closed
dome radars
MAST MOUNTS
Seaview Mast Mounts are designed to keep your radar or
satdome as close as possible to the mast. Some models feature a solid underbody design for increased strength. A stainless steel guard can be added to protect your radar.
PART #
DESCRIPTION
SM-18-R
For 18” Raymarine, 18” Garmin & Broadband
3G/4G radars
SM-18-U
For 18” Furuno, Sitex, Lowrance, Simrad & Koden radars
SM-G18-U
Stainless steel guard for 12”-20” radars (fits SM-18-R &
SM-18-U)
SPODS
The SPODS are the ideal solution for sailors who need to
mount multiple navigation instruments. These fit the majority of steering gear including Jefa, Whitlock and Edson. Two
high polished stainless steel clamps are used to secure the
SPOD to the rails. The SPOD has a wide mounting angle,
allowing for precise viewing. Angle is set during installation.
PART #
DESCRIPTION
SP1S
Large multi-functional sail pod, 16½” x 13” useable face
SP2S
Medium multi-functional sail pod, 14½” x 11½” useable face
SP3S
Fits 3 standard 110x110mm instruments, 14½” x 5½” useable face
SP4S
Fits four standard 110x110mm instruments, 19¼”x5½”
useable face
SP5S
Fits a single standard 110x100mm instrument, 5½”x5½”
useable face
SP1BOX
Attaches to the side of SPOD, 9½”x8½” useable face
POWER PODS
Seaview Power Pods are for both power and sail boats. The
housing is UV resistant ABS plastic and the base is powder
coated aluminum. Quick release handle feature allows for
full adjustment both horizontally and vertically.
16°
PART #
DESCRIPTION
PODW-2-UC
Uncut pod box (9½” x 8½” useable face)
PODW-3-UC
Uncut pod box (12½” x 9¼” useable face)
PODW-4-UC
Uncut pod box (16¼” x 11½” useable face)
30°
360°
Many other marine electronic mounts available
with special order!
Contact Coursemaster for more information.
Level 2 66 Lower Gibbes Street
Chatswood, NSW, AUSTRALIA, 2067
Tel: +61 2 9417 7097
[email protected]
www.coursemaster.com