Phoenix B Phoenix C - AGROVOK

0509_272_PhoenixF4093.qxd
06-10-2006
11:52
Pagina 13
3000-4000-5000 l trailed sprayers
HBWP boom 28-45m
HSA aluminium boom 27-33m
HSS boom 15-30m
Phoenix B
Phoenix C
0509_272_PhoenixF4093.qxd
06-10-2006
11:14
Pagina 2
Compact design with
low centre of gravity
• A wide range of tank capacities from
• Powerful dual agitation systems are
3000 to 5000 l offers a solution for
standard on all models. The stainless
every farm.
steel horizontal tube distributes the
• The large tank capacities significantly
reduce transport and filling time.
• The clever tank design greatly
contributes to the machines low
centre of gravity and ensures
complete emptying even in very
hilly conditions.
return agitation while the turbo
agitation system using 7 venturi
jets can be used when required.
• The return agitation system can be
controlled from the tractor to ensure
complete emptying of spray liquid.
• Two integrated rotating tank rinsing
nozzles provide effective rinsing of
the tank.
Easy access to the platform via a sliding
ladder. Providing good service access
and protection against the elements for
the pump, electrical and hydraulic circuits
2
0509_272_PhoenixF4093.qxd
06-10-2006
11:15
Pagina 3
A strong frame and
automatic steering drawbar
or Autotrac wheelsteering
A strong frame
Twinflex axle suspension
• Heavy construction with two special
• Twin horizontally mounted springs ensure
profiles for maximum strength and
only small height variations aiding boom
optimal ground clearance.
stability and constant nozzle height.
• Developped for large tank capacities
• Dynamic system through progressive
and high speed.
characteristics: stiff suspension with full
• An under belly protection cover can
tank, smooth suspension with empty tank.
• Maintenance free.
be delivered as an option for added
crop protection.
Articulated drawbar with
auto steering
• Phoenix B can be equiped with an
articulated drawbar to ensure the
exact track following and minimal
crop dammage.
• Two sensors on the drawbar
measure the position of the
tractor relative to the sprayer.
Pivoting hydraulic parking stand.
The in lenght adjustable drawbar
with Hydroflex suspension and low
hitchpoint is designed for heavy
working conditions.
The automatic steering drawbar for
Phoenix B is available for low or high
hitch on the tractor.
Hydroflex drawbar suspension
• The fixed drawbar is equipped with
AUTOTRAC steering axle with
Hydroflex suspension. Heavy rubber
Twinflex suspension
buffers protect the machine during
• Available on Phoenix C, this track
high speed transport and spraying
following system is specially designed
• Integrated is a hydraulic park jack
for wide booms and high speed.
with spring assisted storage via
• It ensures a smooth reaction of the
a smart lever system.
boom when turning and has an automatic or manual mode to bring back the
sprayer into the track when crabbing.
3
0509_272_PhoenixF4093.qxd
06-10-2006
11:16
Pagina 4
HSA aluminium sprayboom
Weld free patented
construction from 24 to 33 m
The high tech HSA boom of weld free
patented construction folds in two
stages and is laying on two Teflon
coated and height adjustable front
supports.
The folding cylinders of the second
boom parts are fully integrated in the
boom structure for an optimal protection.
Folded in when the boom is folded out,
they ensure optimal strength for a rigid
non swaying boom.
Parallelogram
• Suspended via two nitrogen dampers.
• Boom crop clearance up to 2,65 m.
• Mechanical and automatic locking of
the hydraulic cylinders during transport.
Efficient protection of the nozzle holders
within the bottom profile of the boom.
This profile is designed for easy cleaning.
With no sharp angles, no liquid and
residues can be trapped. The anodised
surface protects against corrosion and
scratches.
Bearings and grease points
on hinges.
4
Total integration of all hoses in the "U"
shaped top profile, protects against UV
rays and accidental damage.
0509_272_PhoenixF4093.qxd
06-10-2006
11:18
Pagina 5
3D safety tip end
3-dimensional safety tip end with
automatic reset. A locking system
with latches makes yaw impossible.
Anti yaw system HB Plus with
rubber buffers on the centre
section
Pendulum system
Independent slope correction
• Independent suspension left/right.
• Eliminating boom movements
• The efficient boom pendulum system
The optional independent slope
created by acceleration and braking.
• Automatic locking of the rubber
is guided by two heavy duty axles
correction allows adjustment up or
and bearings.
down of each boom independently on
• The boom adapts automatically
buffers by a small hydraulic cylinder
to the slope and the hydraulic slope
assists folding in in hilly conditions.
correction is only required in certain
both left and right sides. A pilot valve
always maintains a stable boom.
conditions.
• The locking of the pendulum system
is standard and needed for folding in
and for spraying with asymmetric
folding (one side partly folded in).
Spraying width*
HSA boom
(m)
24
27
28
30
32
33
symmetric folding asymmetric folding
(m)
(m)
12
15
15
15
17
17
17
21
21.5
22.5
24.5
25
* To obtain exactly the indicated spraying width it might be
necessary to turn off the tri or pentajet manually.
5
0509_272_PhoenixF4093.qxd
06-10-2006
11:18
Pagina 6
HBWP boom
24 to 45 m
Anti yaw system for even spray
pattern in horizontal direction.
Spraying width*
Anti yaw system HB
- Independent suspension left/right.
- Eliminating boom movements created
by accelerating and braking.
• In flatland position the boom is
perfectly levelled out and compensates a wrong position of the sprayer
compared to the field shape.
ABS balancing system
• Perfect boom guiding in hilly or flatland
position through professional double
trapezium balancing system, guided
by rollers in special shaped orifices.
Border nozzle options
- Manual or electric control integrated in
Flowmate or Flowmaster controlbox.
Adjustable bearings and grease
points on hinges.
6
HBWP boom
(m)
symmetric folding
(m)
28
30
32
33
36
39
40
45
22
24
23
24
24
25
26
29
* To obtain exactly the indicated spraying width it might
be necessary to turn off the Pentajet manually.
• In hilly position the boom is following
automatically the inclination of the
sprayer.
• In both cases a slope correction with
automatic reset can be used to adjust
the boom in special cases.
A strong parallelogram with 2 lifting cylinders
- Optimum spraying height and no torsion
whilst folding the boom in and out.
- Low maintenance compared to a mast system.
0509_272_PhoenixF4093.qxd
06-10-2006
11:19
Pagina 7
The HSS booms, a
complete range from
15 to 30 m
The HSS booms are the result of Rau's project to design and develop
a boom which meets all the parameters of a perfect sprayer boom
Triangular structure against torsion, adjustable carriage stops, mechanical locking
devices and closed cylinders in working position to suppress yaw. The perfect
integration of stainless steel spraylines and the optimal hose routing are the
guarantee of perfect spraying quality. Hinges with bearings and grease points
contribute to a very long lifetime.
Balancing system has two
Balancing system for HSS booms with
anti-yaw device.
pivoting points
• The boom freely balances around
the top pendulum and can also pivot
symmetric folding – standard
around a central pivoting point.
• Therefore the boom automatically
adapts to hilly conditions and
remains stable during turning.
• Hydraulic slope correction is standard
asymmetric folding – optional
and has an automatic reset function
with position indication on the
controlbox.
• Locking of pendulum system for
asymmetric folding is standard.
Spraying width*
HSS boom
(m)
15
16
18
20
21
24
27/28
30
symmetric folding asymmetric folding
(m)
(m)
12
12
12
12
12
12
15
15
13,5
14
15
16
16,5
18
21
22
* To obtain exactly the indicated spraying width it might be
necessary to turn off the tri or pentajet manually.
7
0509_272_PhoenixF4093.qxd
06-10-2006
11:49
Pagina 8
Operator control station
"Clean Zone"
Canopy protected, minimising contamination
250 l/min pump, 4 pistons/diaphragms.
A
B
Standard valve layout
Only two 4 way valves make operation
simple. One valve for suction and the
B
other for pressure.
Two other 2 way valves control the
A
tank rinsing system and the pump out
connection for returning liquid fertiliser.
D
E
G
D
Assistron
F
C
Assistron is computer assisted valve
management. Select simply the
desired operation on the control panel,
the activated lights on the white ring
A
Sucction line
B
Pressure line
E
Tank rinsing function
C
Sucction hose connection
F
Filling connection for clean water tank
G
Hand wash tap
indicate which direction the valve
handle must be positioned.
D Pump out connection
Autoset
Fully automatic valve setting by computer and motor valves. Select a function
on the control panel on the sprayer or
in the tractor (Flowmaster), the valves
move automatically to the correct
positions for the required function.
Sprayer filling
Chemical induction hopper, hand wash
facilities, safety clothing locker and
valve panel; all close together and
8
protected under a pivoting cover.
0509_272_PhoenixF4093.qxd
06-10-2006
11:50
Pagina 9
Flowmate control FMC
agms.
First main screen
Second main screen
Spray
functions
Hydraulic
functions
Nozzle selection screen
Memory screen spray data for 20 fields
Flowmate Control FMC:
• Extremly simple to operate with clear read out.
• Very compact by integration of all spraying and hydraulic functions
in one control box.
• Unique ENFO features: Automatic priming and rinsing system
and agitation shut off for minimum rest liquid in the tank.
The section valves and electric-hydraulic blocs are well protected
under a removable cover at the back side close to the boom. This
contributes to minimize hose length and to avoid high quantities of
rest liquid in the spraylines as part of ENFO strategy.
Priming of spray lines before spraying
with automatic section shut off:
Accurate application from the first
second in the field.
1
Emergency control:
pressure regulation
1
2
Emergency control:
agitator cut-out
2
ERM pressur regulator: Compact and
freely accessible next to the chemical
inductor
Rinsing of spray lines with automatic
section shut off: Using the right up to
the last litre of pesticide and allowing
the plumbing system to be flushed with
clean water during an interruption in
spraying through bad weather etc.
• Two linear motors for pressure control and agitation control.
• Large integrated self cleaning pressure filter.
• All electric functions can be operated manually.
• Control valves for high pressure agitation, tank cleaning, spray gun or
outside cleaning kit.
9
0509_272_PhoenixF4093.qxd
06-10-2006
11:50
Pagina 10
Flowmaster FMA
with Can-Bus technology
Flowmaster is part of the new
generation of Rau control boxes built
to the european ISOBUS standard.
The communication between the job
computer on the machine and the
terminal in the tractor cabin is
standardised by the ISO norm 11783.
The data is transmitted by the CanBus principle and only 1 single cable
"Fillflowmeter" menu (option).
with the standard connector is used.
The big screen shows simultaneously
all important parameters of the
spraying operation.
Unique features
• "Environment" menu with rinsing
Spray
functions
Hydraulic
functions
and priming system.
• Fill-meter with autostop (option).
• Nozzle choice assistant.
• 40 field memory.
• Calibration and service menu.
• Self diagnostic menu.
Nozzle selection, droplet size
and programing of target
application rates.
The full automatic valve management
with Autoset allows to execute all
operations from the Flowmaster
terminal without leaving the tractor!
Fast 2 way motor section valves with
auto pressure relief.
"Environment" menu.
Tellus
universal terminal
The Tellus terminal has successfully passed the DLG test and
is the first system to be fully
compatible with the ISOBUS
Standard (ISO 11783). ISOBUS
is exclusively used for tractors,
implements and terminals which
meet the ISOBUS specification
• Can control all Isobus
compatible implements on
the market.
• "Plug and play" between
Isobus compatible tractors
and implements.
• Open standard for software/
exchange of Isobus data.
for data communication.
• High resolution illuminated
The Tellus terminal is the first system to
• Includes all functions of
full colour screen.
be fully compatible with the ISOBUS
Standard (ISO 11783). The Tellus terminal
allows for simple "plug and play" between
with the EC control box.
• Can also control various other
ISOBUS compatible tractors and implements.
Kverneland Group implements
The result is lower cost and simplified
(spreaders, seed drills).
operation of high specification implements.
Operating in combination with Tellus, the EC
electronic control box controls all boom and
spray functions
10
Flowmaster FMA if combined
0509_272_PhoenixF4093.qxd
06-10-2006
11:50
Pagina 11
Technical specifications
PHOENIX
B30
B40
C40
C50
Nominal tank capacity (l)
3000
4000
4000
5000
Maximum tank capacity (l)
3297
4635
4635
5378
Capacity of clean water tank (l) standard
360
360
360
360
Hand wash tank (l) standard
15
15
15
15
●
●
●
●
Chemical induction hopper (l)
Capacity of chemical induction hopper (l)
40
40
40
40
Empty weight with HSS boom (kg), depending of equipment
3965 - 4350
4015 - 4400
4215 - 4600
4265 - 4650
Empty weight with HSA boom (kg) depending of equipment
4150 - 4300
4200 - 4350
4400 - 4550
4450 - 4600
Empty weight HBWPboom (kg), depending of equipment
4530 - 5060
4580 - 5110
4780 - 5310
4830 - 5360
▲
▲
▲
▲
Drawbar / Hitch linkage fixed with Hydroflex suspension, length adjustable
Drawbar / Top linkage fixed with Hydroflex suspension, length adjustable
▲
▲
▲
▲
Drawbar / Top linkage with auto steering without suspension
▲
▲
Drawbar / Hitch linkage with auto steering without suspension
▲
▲
Hitch eye bolted, height adjustable, 40 or 50 mm
▲
▲
▲
▲
Hydraulic pivoting parking stand
▲
▲
▲
▲
PTO shaft
single homocinetic single homocinetic single homocinetic single homocinetic
Attention: Auto steering is only compatible with Flowmate Control FMC version oil circuit or Flowmaster FMA with oil circuit
▲
▲
Sliding wheelaxle, Twinflex suspension, adjustable from 1,75 m - 2,25 m
Fixed wheelaxle, Twinflex suspension, adjustment by multi fit rims
▲
▲
Autotrac steering axle, Twinflex suspension, adjustment by multifit rims
▲
▲
Hydraulic brake
▲
▲
▲
▲
Air brake
▲
▲
▲
▲
Tyre sizes, 8 hole rims
9,5 x 44 - 20,8 x 38 9,5 x 44 - 20,8 x 38
Tyre sizes, 10 hole rims
12,4 x 46 - 710 x 38
12,4 x 46 - 710 x 38
Mudguard narrow for max 16,9 x 38
■
■
■
■
Mudguard wide
■
■
■
■
Attention: Autotrac steering axle only with Flowmaster FMA and oil circuit
▲
▲
▲
▲
Regulation system Flowmate Control FMC (Pre select version)
Regulation system Flowmate Control FMC (Oil circuit version)
▲
▲
▲
▲
Regulation system Flowmaster (Pre select version)
▲
▲
▲
▲
Regulation system Flowmaster (Oil circuit)
▲
▲
▲
▲
Regulation system Tellus (Oil circuit)
▲
▲
▲
▲
Semi continuous flow (only in combination with pressure sensor)
●
●
●
●
Assistron display
●
●
●
●
Assistron display with fill-flowmeter
●
●
●
●
Autoset with fill-flowmeter and automatic fill-stop (only with Flowmaster FMA)
●
●
●
●
Attention: Fill-flowmeter functions can not work with double pump or quick filling device
▲
Pump 200 l/min
Pump 250 l/min
▲
▲
▲
▲
Double pump 2 x 250 l/min separate (second pump only for filling and agitation)
▲
▲
▲
▲
Double pump 2 x 250 l/min connected (both filling and spraying)
▲
▲
▲
▲
Quick filling system (30% higher filling speed, depending on
●
●
●
●
sucction depth), only possible for single pump
HSS steel booms (including slope correction and hydraulic locking)
15 - 30 m
15 - 30 m
15 - 30 m
15 - 30 m
HBWP steel booms (including slope correction and hydraulic locking)
28 - 40 m
28 - 40 m
28 - 45 m
28 - 45 m
HSA aluminium booms (including slope correction and hydraulic locking)
24 - 33 m
24 - 33 m
24 - 33 m
24 - 33 m
●
●
●
●
Independent slope correction (for all booms)
Independent folding second boom part L + R
HSS+HSA
HSS+HSA
HSS+HSA
HSS+HSA
Nozzle holder HSS and HSA boom
1 - 3 - 5 jet
1 - 3 - 5 jet
1 - 3 - 5 jet
1 - 3 - 5 jet
Nozzle holder HBWP boom
5 jet
5 jet
5 jet
5 jet
●
●
●
●
Side protection covers
Steel cover right side (if no protection covers)
●
●
●
●
Drain valve for transfer of liquid fertilizer
▲
▲
▲
▲
Tank inside cleaning
▲
▲
▲
▲
Turbo agitation
▲
▲
▲
▲
Container cleaner in tank man hole
●
●
●
●
Suction hose 2,5” all pumps
■
■
■
■
Float for suction hose
■
■
■
■
Suction hose parking frame
■
■
■
■
Manual border or verge nozzles
●
●
●
●
Electrical border or verge nozzles
●
●
●
●
Hydrant fitting
●
●
●
●
Outside cleaning set
●
●
●
●
Foam marker
●
●
●
●
High pressure spray gun
■
■
■
■
Clean clothing locker
●
●
●
●
Under belly protection cover
●
●
●
●
Sprayer dimensions and number of standard boom sections
Transport width(m)
Total height of sprayer with boom (m)
Total lenght of sprayer with boom (m)
5 section valves (boom width in m)
7 section valves (boom width in m)
9 section valves (boom width in m)
11 section valves (boom width in m)
13 section valves (boom width in m)
▲ = standard or variant equipment
HSS 15 - 30 m HSA 24 - 33 m HBWP 28 - 45 m
2,65
3,45 - 3,85
7,05 - 7,45
15 - 21
24 - 28
● = option, factory fitted
2,65
3,65 - 4,00
7,25 - 8,45
24
27 - 28
30 - 33
2,70 (3,0 for 45 m)
3,85 - 3,95
6,95 - 8,40
28 - 30
32 - 36
39 - 40
45
■ = accessory, dealer fitted
This documentation is not binding. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer.
Specifications and design are subject to change without notice. Printed in Holland. © Kverneland Group
11
0509_272_PhoenixF4093.qxd
06-10-2006
11:51
Kverneland Group is one of the
leading international companies
developing, producing and distributing agricultural and viticultural
machinery. The Group’s family of
strong brands allows us to provide
professional farmers, contractors
and dealers with a unique and
complete range of high quality
products for soil preparation, seeding, grass processing, spreading,
spraying, vine conditioning and
grape harvesting.
Pagina 12
A wide range of
sprayers
Rau offers a wide range of
mounted and trailed sprayers,
with a large choice of booms,
tank capacities and regulation
systems.
Our vision is to enhance the effectiveness of spraying and reduce the
negative effects on our environment.
Providing farmers and contractors
all over the world with the best of
www.kvernelandgroup.com
spraying technology.
Every Rau sprayer leaving the factory
is NSTS tested to meet the latest
UK environmental regulations.
Kverneland Group Crop Care Division
P.O. Box 1000, NL-2150 BA Nieuw-Vennep
The Netherlands
Tel.: +31 252 662 244
F 4094-GB