SOLVENTLESS

SOLVENTLESS
High speed laminator
TECHNICAL DATA
Modulo 120 SF
Modulo 145 SF
Max. size
121x162cm
142x162cm
Max. size
47.5 x 64”
56 x 64”
100-600(g/m2)
100-600(g/m2)
125 m/min
125 m/min
10 000(copies/h)
10 000(copies/h)
Paper range
Mechanical speed
Max. sheets
MAIN GROUPS
1 Feeder
2 Anti-spray powder removal group and dampening system
3 Lamination group
4 Coating unit
5 Separator
6 Stacker
4
6
5
3
2
1
1
FEEDER
Feeder
with pile 1300 mm high
Side-lay
Non-Stop device
(Option)
FEEDER
➢
Accurate and quick feeding of the sheets
➢
High pile (1300mm) to help with long runs
➢
No time lost for changeovers with non-stop facility (Option)
SHEET INTRODUCTION AND ALIGNMENT
Pneumatic front lays electronically controlled
● Electronic setting of sheet size and overlap
● Mechanical or pneumatic side-lay (at choice)
●
Stacker
Mechanical side-lay
Feeder
2
ANTI-SPRAY POWDER REMOVAL
GROUP AND DAMPENING SYSTEM
Light curtain
Dampening system
Anti-spray powder removal group
ANTI-SPRAY POWDER REMOVAL GROUP
Anti-spray powder removal group with forced aspiration and n° 2 brushes,
chromed mini-calender roll and doctor blade.
DAMPENING SYSTEM
Anti-spray powder removal with dampening system by means of rollers.
DESPRAY CALANDER
A good cleaning of the sheet guarantees a better result of the finish and
adhesive saving.
Chrome
Heatable roller
Brush rollers
Doctor blade
Paper
Rubber roller with pneumatic
adjustable pressure
3
LAMINATION GROUP
Hologram reading system
(Option)
Touch screen
panel
Laminating Calander
LAMINATION GROUP
Chromed calander
Ø 294 mm for widths 110 and 120
Ø 450 mm for widths 142 and 162
Rubber pressure roller:
Ø 179 mm for widths 110 and 120 with hydraulic pressure of 8 tons at 6 bar
Ø 355 mm for widths 142 and 162 with hydraulic pressure of 12 tons at 6 bar
TOUCH SCREEN PANEL
➢ Language selection among: Italian, English, German, French,
Spanish, Dutch, Polish and Portuguese
➢
Control and adjustment of all functions of the complete line
➢
Recipe storage for repeated jobs
➢
Operator alarm information and troubleshooting instructions
➢
Diagnostics
➢
Teleservice
➢
Simplicity of use for quick operator learning.
4
COATING UNIT
Electronic management and control
of the adhesive application
by touch screen panel
Coating unit moves away from the laminating unit
for maintenance and cleaning
SOLVENTLESS LAMINATION
The coating unit is operator friendly with an automatic washing system of the coating rollers,
doctor-blade and the adhesive containment basin (which is teflon coated) and with an
easy access between coating unit and laminating calander for any maintenance purpose.
Film trimmer and
trim rewinder
With electronic control
of the rewinding
Tensioner roller
Pressure
calander
Coating roller
Laminating
calander
Grinding roller
Chill roller
(Option)
Paper
Film
Dosage roller
Counter pressure
roller
THERMAL FILM LAMINATION
In any minute you can decide to swap from solventless to thermal
lamination and viceversa = 2 technologies in 1 equipment!
Film trimmer and
trim rewinder
With electronic control
of the rewinding
Film
Chill roller
(Option)
Paper
Laminating
calander
5
SEPARATOR
Hot blade for PET
and specialty films
Bursting rollers
for OPP
Diamond precutting
wheel for OPP
Chill roller
(Option)
Decurling bar
electronically adjusted
SCATEC laser:
A laser reading system with accurate software program
enables the sheet separation exactly in the overlap
position for an even cleaner cut.
Hot knife:
Unstressed and precise cut of laminated sheets in PET
or other specialty Films (metalized, embosed, etc...)
Incision wheel + bursing rollers:
By means of a diamond pre-cutting wheel and a
couple of bursting rollers, one separates OPP very well.
6
Stacker
with pile 1300 mm high
Non-Stop device
(Option)
STACKER
Sheet slow
down
STACKER
➢
Accurate delivery of the sheets with selection of the joggers movement
➢
High pile (1300mm) to help with long runs
➢
No time lost for changeovers with non-stop facility (Option)
➢
Slowing down device of the sheets arriving from the separator to the
stacker in order to prevent any paper jamming.
OPERATOR FOOTBOARD
Standard footboard along the operator side of the
machine to facilitate work on the machine.
Thank you for your attention!
We remain at your disposal for any further information:
ECOSYSTEM COSTRUZIONI S.R.L.
Address: ITALY - 38068 Rovereto (TN)
Via F. Zeni, 8 - Pad. 47/48
Phone: + 39 0464 420852
Fax: + 39 0464 488924
Email: [email protected]
Web: www.ecosystemcostruzioni.eu