LABORATORY OF BUILDING MATERIALS AND BUILDING PHYSICS
Transcription
LABORATORY OF BUILDING MATERIALS AND BUILDING PHYSICS
4 LABORATORY OF BUILDING MATERIALS AND BUILDING PHYSICS Faculty of Engineering, Department of Architecture and Building Construction HEAD OF LABORATORY Dr. Viktor Molnár PhD university associate professor CONTACT Address: H-9026 Győr, Egyetem tér 1. Building: L 4/8 Telephone: +36 96 503-400/3195 +36 96 503-400/3394 E-mail: [email protected] Web: http://eet.sze.hu LABORATORY PROFILE • Year of foundation: 1976 • Capacity (working hours/month): contact lessons 40-70 lessons/month, not fixed 100-130 lessons/month • In the laboratory we do structure diagnostic examinations focusing on mechanical test (tensile and compressive strength), physical examinations (density, bulk density, water absoprtion, freeze-thaw resistance), examinations of the physical characteristics of a building structural analysis (thermal conductivity and thermal transmittance/ U-Value, thermographic surveys) • Technical Specifications: material science, building physics • Services provided: material tests (physical, mechanical), tests on building physics (heat conductivity and thermal transmittance, thermographic surveys) • References: ○○ Laboratory tests of loam (PhD research paper, 1999-2005) ○○ Laboratory tests of insulation materials (PhD research paper, 2008-2012) ○○ Concrete tests on antifreezing (MABA Ltd., 2007-) ○○ Compressive strength tests of concrete (MABA Ltd., 2004-) ○○ Tensile tests of reinforcing steel (MÁV Co., 1976-) Equipment and software of the laboratory TAURUS TCA 300 THERMAL CONDUCTIVITY MEASURING INSTRUMENT • Year of purchase: 2008 • Used for determining thermal conductivity of insulation materials • Technical Specifications: material science, building physics • Provided services: building physical tests, thermal conductivity measurement • References: building physical testings on insulation materials (PhD research paper, 2008-2012) 44 RESEARCH CAPACITIES AND EQUIPMENT TESTO 882 THERMOCAMERA • Year of purchase: 2009 • It takes high-resolution thermal images; detects the anomalies and building physical weak points of buildings; it is also capable of detecting areas with danger of mould • Technical Specifications: building physics • Provided services: thermographic tests, making temperature maps • References: thermographic scannings of detached houses (2009-) SCHLEIBINGER FREEZE-THAW CHAMBER • Year of purchase: 2007 • Cyclically programmable frost-thaw chamber, suitable for testing various building materials (especially different types of concrete) freeze-thaw resistance • Technical Specifications: material science, building physics • Services provided: freeze-thraw resistance test of concrete • References: freeze-thraw resistance test of concrete (MABA Ltd., 2004-) ADR 2000 CONCRETE COMPRESSION TESTING MACHINE • Year of purchase: 2004 • It is suitable for the compression of concrete test specimens up to maximum 2000 kN pressure (to determine compressive strength) • Technical Specifications: material science • Services provided: tests on the compressive strength of concrete • References: tests on the compressive strength of concrete (MABA Ltd., 2004-) ZD 40 TENSION-COMPRESSION TESTING MACHINE • Year of purchase: 1976 • Suitable for tension-compression testing of different build- ing materials (especially cement, gypsum, steel and wood) up to maximum 4000 kN compressive or tensile force (determining compressive and tensile strength) • Technical Specifications: material science • Services provided: tests on compressive and tensile strength of reinforcing steel and wood • References: tensile tests of reinforcing steel (MAV Co., 1976-) Faculty of Engineering, Department of Architecture and Building Construction Laboratory of Building Materials and Building Physics RESEARCH CAPACITIES AND EQUIPMENT 45