Untitled - Green Air Designs

Transcription

Greenair Catalogue
Accessories:Propellor Drivers
#0121
Prop Adaptor 3mm
19:17 GMT: Fri Dec 04 2009
#0123
Prop 5x3 fixed
£1.06
5x3 fixed Prop
£1.95
3mm Prop adapter
#0124
Prop 6x3 Folding
£2.50
6x3 folder and 2.3mm ID shaft folding hub.
#0775
Prop Adaptor 4mm
£6.00
#0125
4mm Prop adapter
Prop 7x5 Fixed
£1.50
7x5 Fixed Prop
Accessories:Propellors and Fan units:E-flight
#0792
APC 4.75x4.75 E
#0818
£1.98
Prop 8x4 three blader
£2.50
8x4 three blade propellor
4.75x4.75 prop. Speed prop for fast pusher jets
or warbirds.
Accessories:Propellors and Fan units:EDF Fan units
#0948
EDF 32mm Viper-Tech COMBO UNIT
£38.50
32mm Vipertech EDF unit
#0759
APC 5.25x4.75 E
Up to 75000 rpm
£2.25
5.25x4.75 prop, for medium speed
appiucations
Up to 140g Thrust (3s) 7A
Inlcudes Brushless inrunner12mm
#0947
#0829
APC 5x5E E
£1.98
EDF 32mm Viper-Tech Fan
£7.98
32mm Vipertech EDF unit
5x5E Fixed Prop
Up to 75000 rpm
Up to 140g Thrust (3s) 7A
#0816
APC 6x4 E
£1.98
6x4E Fixed Prop
#0922
EDF 40mm GWS Fan
£7.50
40mm GWS EDF unit
#0817
APC 6x5.5 E
£1.98
6x5.5E Fixed Prop
#0016
EDF 48mm Combo
£29.00
48mm EDF Combo Up to 18 oz Thrust 18A Esc required
#0122
Prop 5 x 4.3 fixed
#0960
£1.00
EDF 50mm 6 Blader
£9.95
50mm chinese FAN
#0017
EDF 50mm WeMoTeC Micro Fan
£13.50
50mm Wemotec Microfan
#1179
Prop 5x3 three blader
£0.79
Prop 5x3 three blader RP
£0.79
#1178
#0915
EDF 55mm Combo
55mm EDF Combo Up to 25 oz Thrust 25A Esc required
-1-
£24.95
Greenair Catalogue
#0953
EDF 64mm GWS Fan
£10.95
EDF 64mm W/ADH300 Fan
£19.95
Aircraft Kits:ARTF models
64mm GWS EDF unit
#1154
19:17 GMT: Fri Dec 04 2009
#0930
E-Do Model F-15
£109.95
Wingspan:740mmm;
Length:1100mm;
Take off weight:700g
Configuration:
Powerful 4850KV inner runner brushless motor;
Ducted fan Dimension:64mm
64mm EDF unit Fur Super Mystere ETC...
Thrust: 650g
Required:
Brushless ESC:30A
Servo: 9g * 5 pcs
#0946
EDF 68mm 3.175mm Adaptor
£4.95
68mm Wemotec Minifan Copy
Radio required:4ch FM Tx,and 6ch RX.
Battery:11.1v,2200mah lipoly battery(15c)
3.175mm Adaptor for Minifan
Charger: balancer and adaptor
#0931
E-Do Model F-15 Tail Parts
£12.40
Tail Parts
#0923
EDF 68mm WeMoTeC Mini Fan
#1100
£9.95
E-Do Model F-4 Phantom
£109.95
Wingspan:740mmm;
Length:1100mm;
Take off weight:700g
Configuration:
Powerful 4850KV inner runner brushless motor;
Ducted fan Dimension:64mm
Thrust: 650g
68mm Wemotec Minifan Copy
Supplied with 3mm Shaft Adaptor
Required:
#0015
Viper Tech 44mm Combo
Brushless ESC:30A
Servo: 9g * 5 pcs
£29.70
44mm EDF Combo 18A esc required up to 12oz
thrust on 3s LIPO pack
Radio required:4ch FM Tx,and 6ch RX.
Battery:11.1v,2200mah lipoly battery(15c)
Charger: balancer and adaptor
#0994
#0773
Viper Tech 50 XL
E-Do Model Phantom
£109.95
Specifications:
Wingspan: 628mm
Length:1000mm
Weight:620g
Configuration:
Kit Version Includes:
4850KV Brushless inrunner motor
64mm Ducted fan unit
Kit Requires:
30A Brushless ESC (we can supply this at a very good cost)
4 x 9 gram servos
£32.95
50mm Fan and high performance brushless motor
Good on 3s LIPO, stupendous on 4s LIPO!!
Current draw 30A(3s)/42A(4s).
#1143
FLyFLy Mirage
As EDF models go, they don't get much better than this! Anyone with
building experience should find this a breeze to assemble and finish. With
the included white decals the L-39 has an all inspiring airborne presence
that we think is unsurpassed.
Included in this package is the essential CATAPULT LAUNCH bungee
system to help ensure the L-39 reaches flying speed in a very short
distance!
Motor - 3600rpm/V (installed)
Wingspan - 900mm (35.4ins)
Weight - approx. 1100-1200g
Suits - 3 channel
Battery - Suits 11.1V - 14.8V 2100-3200 Li-Poly
Length - 810mm (31.9ins)
Recommended Servo - 3 micro servos
Recommended ESC - 35 amp BEC
-2-
£109.95
Greenair Catalogue
#0929
JP L-39
19:17 GMT: Fri Dec 04 2009
#0928
£109.95
Sapac BaE Composite Hawk
As EDF models go, they don't get much better
than this! Anyone with building experience
should find this a breeze to assemble and
finish. With the included white decals the L-39
has an all inspiring airborne presence that we
think is unsurpassed.
£229.95
Fuselage Length: 39.37in(1000mm)
Wingspan: 37.40in(950mm)
Wing Area: 279.77 in2(18dm2)
Wing Loading: 22.7-23.9 oz/ft2(69-73g/dm2)
Included in this package is the essential
CATAPULT LAUNCH bungee system to help
ensure the L-39 reaches flying speed in a very short distance!
Flying Weight: 44.1-46.5oz (1250-1320g)
Power System: Brushless motor(KV:3200) & 70mm EDF UNIT INCLUDED
Parts Required.
Battery: Lipo 14.8v 3000mAh 20C
Radio System: 4 Channel
ESC: Minimum 60A
Servo: Micro servo serials x 5
(Hitec 65 MG or equ)
Suits - 3 channel
Battery - Suits 11.1V - 14.8V 2100-3200 Li-Poly
Aircraft Kits:GAD kits:ARTF Kits
#1091
GAD CT-114 Tutor EDF
#1083
£79.95
Green Air Designs is proud to announce the first
in a line of molded ARF kits.
JP MiG-15
CANADAIR CT-114 Tutor EDF "Snowbird"
£109.95
The MIG-15 has been a favourite for model
pilots for as long as we care to remember
...and for a very good reason! It's large intake
allows as much uninterrupted air flow to access
the fan unit as possible resulting in a very
efficient system that lends itself to high
powered EDF fan units. With it's sleek wing
section this MIG-15 offers a very high speed
package that can reach speeds of over
120mph! CAUTION not for the fainthearted!
Included in this package is the essential CATAPULT LAUNCH bungee
system to help ensure the MIG-15 reaches flying speed in a very short
distance!
Snowbird Molded Foam ARF Kit.
Kit Comes with FULL hardware pack, canopy & Underarriage
1 x 5g (Optional Rudder)
1 x 18-25A ESC
1x1700 - 2250 3s Lipos
Suits - 3 channel
Setup Deal (Rx Ready) Includes:-
Battery - Suits 11.1V 2100-3200 Li-Poly (JP No 4403710 or 4403730)
Servos
Brushless Esc
EDf unit Built / Tested
Lipo Battery
36" span (900mm)
31" Length(780)
55mm EDF WIth Brushless motor
Requires:
3 x 9g servos
All you need is your Rx.....
#1084
RC Lander F-16
Please Visit our gallery (top of your screen) to see full build photos and
flying shots!!!!!!!!
£99.95
Specification:
* Length: 1100mm (43.3 inches)
* Wing Span: 765mm (30 inches)
* Flying Weight: 1400â 1500g (49-52.9oz)
* Recomended Ducted Fan: 70mm
* Recomended Battery: 4S (14.8v)
3300-3700mAh, 20-25C
* Landing Gear: Retractable included
* Gear Doors: Yes (option)
* Servo: 9g X 5 , 1 X Retract (Nose Gear)
* Recomended Direction Control, 2 X Alieron , 2 X Elevator
#1085
RC Lander F9-F 'Panther'
#1009
GAD Global Hawk
£79.95
Simple to construct, durable
WING SPAN: 2000mm
LENGTH: 768mm
Wing Area: 25.4dm2
Hight:273mm
Ready to Fly Weight: 650-750g
Ducted fan: 68mm (Included with brushless
motor)
Full Undercarriage included
Full Setup deal available on request (Servos, Esc, Cells etc)
Flies like it's on rails.
£99.95
Wing span: 1050mm
Length: 1000mm
Aircraft Kits:GAD kits:Jet Kits:EDF jets
Height: 300mm
#1087
Flying weight: 1.1-1.3kg
Antonov AN-225 EDF
NOT AVALABLE YET!
Function: Retract landing gear system
Laser & CNC Cut Kit from Foam/Depron, Water
Slide decals, All wood
required to build
kit, Glass & Hardware pack.
Designed for6 x 40mm GWS edf unit or Pusher
setup
Build Skill - Easy
Flying Skill - Easy
Equipment Required:
Servo: 9g x 5pcs or 8pcs
Power system: Brushless electrical ducted fan 68mm or Lander Metal
68mm EDF Unit(4370kv motor).
ESC: 60A or above
62" span
68" Long
upto 3s 1900Mah
Radio: 5 to 6 CH
Battery: 11.1v 3S /3000mAh or above
-3-
£99.95
Greenair Catalogue
#0925
BaC Lightning Mk-6 EDF
#1186
£84.95
Slide decals, All wood required to build
Designed for 65-70mm edf unit or Pusher setup
Build Skill - Easy
Flying Skill - Easy
19:17 GMT: Fri Dec 04 2009
DH-100 Vampire EDF (deal)
Laser Cut Kit from Depron, Water
Slide decals, All wood required to
build kit, Glass & Hardware pack.
£99.95
Wingspan:28"
Flying weight:12oz appx
CNC CUT Wing cores
HAND LAUNCHABLE, NO
BUNGEES!
#0722
BAE Hawk
Laser Cut Kit from
Depron, Water Slide
decals, All wood
required to build kit,
Glass & Hardware pack.
Designed for 44mm EDF (Viper-Tech
EDF-44) or 21-24g GAD Brushless
(pusher)
£39.95
Wngspan:24"
3s 850-1300Mah Lipos
Build Skill - Easy
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Flying Skill - Easy
Designed for 50mm VIPER edf unit or Pusher
setup
#1137
£119.95
Available Mid to Late June
Build Skill - Easy
English Electric Canberra PR-7/9
Flying Skill - Easy /Intermidiate (Fast)
#0030
BAE Hawk (deal)
CNC cut Fuse & Wings, Laser Cut everything
else..
£99.95
Laser Cut Kit from Depron, Water Slide decals,
All wood required to build
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Designed for 50mm VIPER edf unit or Pusher
setup
Build Skill - Easy
Flying Skill - Easy
Specs:
46" Span
48" Long
Weight: 30oz
2 x EDF-50 (GAD 50XL is ideal)
Deal Includes EDF,ESC,Servos
#1067
EE Canberra PR-7 EDF/Pusher
or
Boeing 747-400
£99.95
62 x GAD 21g 3000kv Motors]
NOT AVALABLE YET!
Slide decals, All wood
required to build
Designed for4 x 40mm GWS edf unit or Pusher
setup
Build Skill - Easy
Flying Skill - Easy
#1156
Dassault Super Mystere
Laser & CNC Cut Kit
from Foam/Depron,
Water Slide decals, All
wood required to build
kit, Glass & Hardware
pack.
Kit includes Full Working Retracts/geardoorsPlit Flps (as per scale)
#0691
£69.95
Wngspan:28"
NEW UPDATED KIT,
Hardpoints added,
missile rails, working canards
£39.95
Wingspan:24"
Length:30"
Weight:up to 19oz
Power units:2 x
44mm Viper units
ESCs:2x18A
Battery:3s LIPO
1800mAh or better
Servos:2x5-9g and
optional 5g Canard
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Designed for 64mm edf
unit or Pusher setup
Very scale looks & easier than scale flight
characteristics
Build Skill - Easy
Flying Skill - Easy
#0031
Eurofighter (EDF)
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Glass & Hardware
pack.
Build Skill - Easy
DH-100 Vampire EDF
Laser Cut Kit from
Depron, Water Slide
decals, All wood
£39.95
Flying Skill - Easy
Wingspan:28"
Flying weight:12oz
appx
#0034
Eurofighter (EDF) Deal
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Glass & Hardware
pack.
CNC CUT Wing cores
HAND LAUNCHABLE,
NO BUNGEES!
PLUS two EDF Viper
kits and 2x 18A ESC
Designed for 44mm EDF (Viper-Tech EDF-44) or
21-24g GAD Brushless (pusher)
and 2x servos
NEW UPDATED KIT, Hardpoints added, missile
rails, working canards
Build Skill - Easy
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Flying Skill - Easy
characteristics
Build Skill - Easy
Flying Skill - Easy
-4-
Wingspan:24"
Length:30"
Weight:up to 19oz
Power units:2 x
44mm Viper units
ESCs:2x18A
Battery:3s LIPO
1800mAh or better
Servos:2x5-9g and
optional 5g Canard
£130.00
Greenair Catalogue
#1088
F/A-18 Hornet EDF
19:17 GMT: Fri Dec 04 2009
#0052
£44.95
Lockheed F104 Starfighter EDF
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Designed GAD21g Brushless up to 400 sized
Brushless
SUPERB TRAINER JET!
3s 1300-2100 3-4s
Build Skill - Easy
#1089
F/A-18 Hornet EDF Deal
£54.95
Laser cut kit
Designed for 50-55edf unit or Pusher setup
Build Skill - Medium
Flying Skill - Easy
#1176
£125.00
McDonnell Douglas F-101 DEAL 1
Laser & CNC Cut Kit from
Foam/Depron, Water Slide decals, All
wood required to build kit, Glass &
Hardware pack.
Brushless
3s 1300-2100 3-4s
Build Skill - Easy
£129.94
Wngspan:28"
Designed for 65-70mm edf unit or
Pusher setup
Inc EDF`s/Motor`s/ESC`s & Servos.
Build Skill - Easy
#0957
Grummen F-14A Tomcat
Flying Skill - Easy
£69.95
Laser cut kit
INC MOTOR/Esc & Fan
#1177
McDonnell Douglas F-101 DEAL 2
Laser & CNC Cut Kit from
Foam/Depron, Water Slide decals, All
wood required to build kit, Glass &
Hardware pack.
#0045
Hawker Hunter EDF
Laser Cut Kit from
Depron, Water Slide
decals, All wood
£140.00
Wngspan:28"
Designed for 65-70mm edf unit or
Pusher setup
£47.50
Build Skill - Easy
Wingspan:24"
Weight:up to 18 oz
Flying Skill - Easy
INC MOTOR/Esc & Fan
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#1070
McDonnell Douglas F-101 Voodoo
Flying Skill - Easy
Laser & CNC Cut Kit
from Foam/Depron,
pack.
Hunter EDF Setup Deal
Designed for 65-70mm
edf unit or Pusher setup
Laser Cut Kit including waterslide decals
hardware etc....
£84.95
Wngspan:28"
Build Skill - Easy
Flying Skill - Easy
1 x Viper-Tec 48 or 50mm inc motor.
#0047
1 x 18A Brushless Esc`s
2 x 5g Servos
(Parts are Subject to change as required)
#0771
Hawker Hunter EDF (deal)
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Mig-21 Fishbed
Laser Cut Kit from
Depron, Water Slide
decals, All wood
£109.95
£34.95
Wingspan:
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Wingspan:24"
Weight:up to 18 oz
Designed for 44mm EDF (Viper-Tech EDF-44) or
21-24g GAD Brushless (pusher)
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Flying Skill - Easy
Flying Skill - Easy
#1086
Hunter EDF Setup Deal
Mikoyan Gurevich MiG-21 EDF
Slide decals, All wood required to build
Build Skill - Easy
Flying Skill - Easy
Laser Cut Kit including waterslide decals
hardware etc....
Deal includes:
1 x Viper-Tec 48 or 50mm inc motor.
1 x 5g Servos
1x 9g servo
-5-
£84.95
Greenair Catalogue
#1157
NorthAmerican F-100 Super Sabre
Laser & CNC Cut Kit
from Foam/Depron,
19:17 GMT: Fri Dec 04 2009
#0723
£69.95
Avro Vulcan (deal)
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Wngspan:28"
£94.95
Wingspan:36"
Length:38"
pack.
Build Skill - Easy
Designed for 64mm edf unit or Pusher setup
Flying Skill - Easy
Build Skill - Easy
Setup Deal Includes:
Flying Skill - Easy
2 x servos
#1195
Panavia Tornado GR4 EDF
£130.00
2 x Brushless Motors
Laser & CNC Cut Kit from Foam/Depron, Water Slide decals, All wood
required to build
Build Skill - Easy
Flying Skill - Easy
#0718
Phantom (EDF) Deal
2 x Brushless Esc`s
2 x Props & Adaptors
#0029
£130.00
PLUS two EDF Viper kits and 2x 18A ESC and
2x servos
NEW UPDATED KIT, Hardpoints added, missile
rails, working canards
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Build Skill - Easy
Phantom EDF
Flying Skill - Easy
£49.95
Sepecat Jaguar (EDF) Deal
Build Manual PDF
B-52 Setup Deal
Laser Cut Kit including waterslide decals hardware
etc....
1 x GAD Brushless Motor
1 x 10A Brushless Esc
3 x 5g Servos
£89.95
#0724
Boeing B-52 Stratofortress (deal)
characteristics
Build Skill - Easy
Flying Skill - Easy
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Deal includes EDF/ESC /Motor/Servos
#0719
Sepecat Jaguar EDF
Designed for GAD 21g Brushless
characteristics
Build Skill - Easy
Flying Skill - Easy
Build Skill - Easy
Flying Skill - Easy
Aircraft Kits:GAD kits:Jet Kits:Pusher jets
Avro Vulcan
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Wingspan:36"
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
£44.95
#0057
Wingspan:36"
Designed for GAD 21g Brushless
NEW UPDATED KIT,
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
characteristics
Build Skill - Easy
Flying Skill - Easy
#1082
£39.95
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
characteristics
Build Skill - Easy
Flying Skill - Easy
#1080
Boeing B-52 Stratofortress
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Build Manual PDF
£54.95
B-52 Setup Deal
Wingspan:36"
Length:38"
etc....
Build Skill - Easy
1 x 10A Brushless Esc
Flying Skill - Easy
3 x 5g Servos
Setup Deal Includes:
2 x servos
2 x Brushless Motors
2 x Brushless Esc`s
2 x Props & Adaptors
-6-
£74.95
Greenair Catalogue
#0850
Canadair CT114 Tutor
Laser Cut Kit from
Depron, Water Slide
decals, All wood
#0042
£44.95
English Electric Lightning Mk VI
Brushless (mega 16/15/3)
#0782
Eurofighter
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Glass & Hardware
pack.
Designed Pusher setup
Build Skill - Easy
Flying Skill - Easy
Canadair CT114 Tutor (Deal)
Laser Cut Kit from
Depron, Water Slide
decals, All wood
£47.50
All wood required to build kit, Glass & Hardware
pack.
Wngspan:24"
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#0851
19:17 GMT: Fri Dec 04 2009
£84.95
NEW UPDATED KIT,
Hardpoints added,
Wngspan:24"
£39.95
Wingspan:24"
Length:30"
Weight:up to 19oz
ESCs:1x18A
Battery:3s LIPO
1800mAh or better
Servos:2x5-9g and
optional 5g Canard
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
characteristics
Build Skill - Easy
Designed Pusher setup
Flying Skill - Easy
Build Skill - Easy
Flying Skill - Easy
#0783
#0033
D-Tyke
Eurofighter (deal)
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Glass & Hardware
pack.
£24.95
laser cut kit
NEW UPDATED KIT,
Hardpoints added,
#0786
D-Tyke (deal)
£74.95
Wingspan:24"
Length:30"
Weight:up to 19oz
ESCs:1x18A
Battery:3s LIPO
1800mAh or better
Servos:2x5-9g and
optional 5g Canard
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
£54.95
laser cut kit
characteristics
Inc Motor/Esc & servos
Build Skill - Easy
Flying Skill - Easy
#0758
#0820
DH100 Vampire
F-15 C Eagle
£39.95
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SUPERB TRAINER JET!
3s 1000-1500MahLipos
Build Skill - Easy
£39.95
DH-100 Vampire laser cut depron model
Flying Skill - Easy
#0056
DH101 Venom
£39.95
Missile rails & afterburner plate included
Vickers Venom laser cut depron model
#0046
English Electric Lightning F-MK-VI Deal
#0039
£74.95
F-15 C Eagle (deal)
£74.95
Laser cut kit
Includes Motor, ESC and servos
All wood required to build kit, Glass &
Hardware
pack.
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Deal includes:
Gad 21g 3000kv motor
18A Esc
3 x Servos
#0725
G-Tyke
laser cut kit
-7-
£14.95
Greenair Catalogue
#0040
GAD F-18 Hornet Pusher
Aircraft Kits:GAD kits:Propellor aircraft:Multi engined
£44.95
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Brushless
SUPERB TRAINER JET!
3s 1300-2100 3-4s
Build Skill - Easy
#0035
GAD F/A-18 Hornet Deal
#0027
£89.95
#0028
£89.95
Wingspan:62"
Power units:4 x
GAD 21g Brushless
ESCs:4 x 10A ESC
Battery:2-3s
2000-4500mah cells
Servos reqd.:3 x 5g
and one 9g
Build skill:Easy
Flying skill:Easy
Avro Lancaster Deal
Laser Cut Kit including
waterslide decals
hardware etc....
PLUS
4 x GAD Brushless
Motors
Inc Motor/ESC Servos.
Sukhoi SU-27 'Flanker'
Avro Lancaster
Laser Cut Kit from
Depron
Water Slide decals
All wood required to
build kit
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Brushless
SUPERB TRAINER JET!
3s 1300-2100 3-4s
Build Skill - Easy
#0053
19:17 GMT: Fri Dec 04 2009
£149.95
Wingspan:62"
£39.95
Laser Cut Kit from
Depron, Water Slide
Wingspan:24"
decals, All wood
Glass & Hardware
pack.
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3 x 5g Servos
1 x 9g servo
#0703
B17 Flying fortress
£99.95
Laser Cut Kit from
Depron
Water Slide decals
All wood required to
build kit
Wingspan:63"
Power units:4 x
GAD 21g Brushless
1700 kv
ESCs:4 x 10A ESC
Battery:3s
2000-4500mah cells
Build thread is here
Servos reqd.:5 x 5g
( http://www.rcgroups.com/forums/showthread.php?t=940853)
and 4 x 9g
Build skill:
moderate/expert
Flying skill:Easy
Weight:4.5lb with all
accessories
SUPERB TRAINER JET!
Build Skill - Easy - Medium
Flying Skill - Easy
Su-27 FLanker Setup Deal
etc....
#0032
2 x 5g Servos
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#0054
Sukhoi SU-27 Flanker Deal
£74.95
#0965
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SUPERB TRAINER JET!
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#0683
GAD E2K Pylon
£34.95
800mm span Flying sport wing
Wingspan:800mm
#1057
GAD Sport Wing
DH-98 Mosquito deal
Inludes twin motors,
ESC, and all servos
needed.
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
£34.95
800mm span Flying sport wing
Wingspan:800mm
-8-
£39.95
Wingspan:32"
Servos rqd.:2 x 5g
Power units:2x 21g brushless
ESCs:2 x 10A
Build skill:Easy
Flying skill:Easy
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Glass & Hardware
pack.
Aircraft Kits:GAD kits:Other Kits
£39.95
Wingspan:32"
Servos rqd.:2 x 5g
Power units:2x 21g
brushless
ESCs:2 x 10A
Build skill:Easy
Flying skill:Easy
DH-98 Mosquito
Laser Cut Kit from Depron, Water
Slide decals, All wood required to
build kit, Glass & Hardware pack.
Build Skill - Easy - Medium
Flying Skill - Easy
#1127
DH-98 Mosquito
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Glass & Hardware
pack.
Wingspan:32"
Servos rqd.:2 x 5g
Power units:2x 21g
brushless
ESCs:2 x 10A
Build skill:Easy
Flying skill:Easy
£79.95
Greenair Catalogue
#0050
Lockheed P-38 Lightning
#0023
£34.95
Laser Cut Kit from
Depron, Water Slide
decals, All wood
19:17 GMT: Fri Dec 04 2009
Mescherschmitt ME 109
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Glass & Hardware
Wingspan:32"
Power units:2 x 21g
brushless motors
ESCs:2 x 10A
Servos:2 x 9g
HAND LAUNCHABLE,
Battery:2S or 3S
NO
1300mAh
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
£24.95
Wingspan:22"
Weight:up to 12oz
pack.
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Designed for 1 x GAD 21g Brushless & 3s
600-1000mah cells, 2 x 5g servos
#0684
Lockheed P-38 Lightning Deal
£84.95
22" Span
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Wingspan:32"
Power units:2 x 21g
brushless motors
ESCs:2 x 10A
Servos:2 x 9g
HAND LAUNCHABLE,
Battery:2S or 3S
NO
1300mAh
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Build Skill - Easy
#0024
Aircraft Kits:GAD kits:Propellor aircraft:Single engined
#0043
Focke Wulf 190
Laser cut depron full kit,
waterslide decals,
canopy and hardware.
Wingspan:28"
Length:30"
Weight:up to 16oz
Build Skill - Easy
£59.95
#0765
pack
Hawker Tempest
Wingspan:22"
Weight:up to 12oz
£24.95
22" Span
Wingspan:22"
Weight:up to 12oz
Build Skill - Easy
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#0025
North American P-51B Mustang
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Glass & Hardware
pack.
22" Span
£24.95
Wingspan:22"
Weight:up to 12oz
HAND LAUNCHABLE,
NO BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Build Skill - Easy
Flying Skill - Easy
#0686
£49.95
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
needs 3s 1300 mAh
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Mig 3 (deal)
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Glass & Hardware
pack.
Wingspan:28"
Length:30"
Weight:appx 16oz.
Complete with C36
21300KV brushless
motor, 18A controller
and 2x5g servos
#0026
Wingspan:22"
Weight:up to 12oz
22" Span
Focke-Wulf FW-190 Deal
waterslide decals,
£24.95
HAND LAUNCHABLE, NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
£29.95
Suits C36 2300Kv
and 3s 1300 mAh pack,
with 2 x 5g servos.
#0044
Mig 3
Laser Cut Kit from
Depron, Water Slide
decals, All wood
Glass & Hardware
pack.
Hawker Tempest deal
Laser Cut Kit from
Depron, Water Slide
decals, All wood
£54.95
22" Span
Wingspan:22"
Weight:up to 12oz
Build Skill - Easy
HAND LAUNCHABLE,
NO
BUNGEES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#0055
Supermarine Spitfire Mk IX
waterslide decals,
Supplied with 1 x GAD 21g Brushless , 10A ESC
& 2 x 5g servos
Suits C36 2300Kv
and 3s 1300 mAh pack,
with 2 x 5g servos.
22" Span
Build Skill - Easy
Flying Skill - Easy
-9-
Wingspan:28"
Length:30"
Weight:up to 16oz
£29.95
Greenair Catalogue
#0051
Supermarine Spitfire Mk IX deal
waterslide decals,
Includes C36 2300Kv
and 2 x 5g servos.
19:17 GMT: Fri Dec 04 2009
Electrical:Batteries:Lithium Polymer
£69.95
#1114
Wingspan:28"
Length:30"
Weight:up to 16oz
2S 1750MAh 11.1V (20-30C)
Quality 1750mAh Cell. Rated
15C-25C. Lifetime will be reduced at
higher discharge levels, as with all
LIPO cells.
#0061
Capacity:1750mAh
Weight:139g
Discharge rate:20-30c
Size:100mm x 33mm x 20mm
Connector:'Deans' Style.
3S 1050mAh 11.1V (20C)
Quality 1050mAh Cell.
Rated 15C-25C.
Lifetime will be reduced
at higher discharge
levels, as with all LIPO
cells.
#0458
£14.95
£13.95
Capacity:1050mAh
Weight:100.3g
Discharge rate:
15c-25C (30C burst)
Size:73x35x18mm
Connector:Deans
style
3S 1250mAh 11.1V (20c)
£15.95
1250mah 11.1v 20c+
#0063
3S 1350mAh 11.1V (25C)
Rated 15C-25C. Lifetime
will be reduced at higher
discharge levels, as with
all LIPO cells.
#1033
#0067
Capacity:1300mAh
Weight:112g
Discharge rate:
15C-25C
Size:68x34x24mm
Connector:'Deans'
Style.
3S 1350mAh 11.1V 30c)
Rated 30-40. Lifetime will
be reduced at higher
all LIPO cells.
£18.95
£20.95
Capacity:1300mAh
Weight:112g
Discharge rate:30-40
Size:68x34x24mm
Connector:'Deans'
Style.
3S 1550mah 11.1V (25c)
£17.95
1550mah 11.1v
#0072
3S 1750MAh 11.1V (25C)
Rated 15C-25C.
Lifetime will be reduced
at higher discharge
levels, as with all LIPO
cells.
#0077
- 10 -
Capacity:1750mAh
Weight:139g
Discharge rate:
15-25C
Size:100mm x
33mm x 20mm
Connector:'Deans'
Style.
3S 2250mAh 11.1V 25c
2250mah 11.1v 25C+
£19.95
£29.95
Greenair Catalogue
#1118
3S 2620mAh 11.1V TX Lipo
#1134
£19.95
2620 TX Pack Lipo
#0079
Turnigy 3S 4000mAh 11.1(20c)
£34.95
4000mah 11.1v 25c+
4S 1750mAh 14.5V
Good pack for high
current high power
EDF use, or as a
general purpose pack
in larger models.
19:17 GMT: Fri Dec 04 2009
£29.95
#1105
Zippy 2S 1000mAh 7.4(20c)
£6.95
Spec.
Capacity: 1000mAh
Voltage: 2S1P / 2 Cell / 7.4v
Discharge: 20C Constant / 25-30C Burst
Weight: 58g (including wire, plug & shrink wrap)
Dimensions: 75x35x12mm
Balance Plug: JST-XH
Voltage:14.5v
nominal
Capacity:1750mAh
niminal
Constant rate:20C
(35A)
Burst Rate:30C
(43.5A) 30 sec.
Pack Size:
85x30x28mm
#1037
Zippy 2S 1800mAh 7.4(20c)
£12.14
1800mah 7.4v 20c+
#1034
4S 2350mAh 11.1V
£34.95
2350mah 14.8 25C+
#1096
#1106
GAD HP 3S 1300mAh (25c)
Zippy 3S 1300mAh 11.1V (15-25C)
Rated 15C-25C. Lifetime
will be reduced at higher
all LIPO cells.
£15.95
Spec.
Minimum Capacity: 1300mAh
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 25C
Peak Discharge (10sec): 35C
Pack Weight: 123g
Pack Size: 71 x 34 x 24mm
Charge Plug: JST-XH
#1038
£18.95
Capacity:1300mAh
Weight:112g
Discharge rate:
15C-25C
Size:68x34x24mm
Connector:'Deans'
Style.
Zippy 3S 1800mAh 11.1(20c)
£21.95
1800mah 11.1v 20c+
#0073
GAD HP 3S 2200mAh (20c)
£19.95
Spec.
Minimum Capacity: 2200mAh
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 185g
Pack Size: 103 x 33 x 24mm
Charge Plug: JST-XH
#1104
Zippy 3S 2200mAh 11.1(25c)
£22.95
2200mah 11.1v 25c+
#1155
Turnagy 1800mAh 14.8V 30-40c
Good pack for high
current high power EDF
use, or as a general
purpose pack in larger
models.
#1184
£24.95
Voltage:14.8v
nominal
Capacity:1800mAh
niminal
Constant rate:30C
(35A)
Burst Rate:40C
(43.5A) 30 sec.
Pack Size:
85x30x28mm
Turnagy 500mAh 11.1v 20
Electrical:Battery chargers
#1119
The IMAX 6B is a very advanced charger, able
to charge, balance and discharge Lion, LiPo,
LiFe (A123), NiCd and NiMH batteries.
£7.50
Features;
Microprocessor controlled
Delta-peak sensitivity
Individual cell balancing
Li-ion, LiPo and LiFe capable
Good pack for high current high power EDF use, or as a general purpose
pack in larger models.
#1135
£19.95
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.
1800mah 11.1v 25c+
#1133
Imax B6 Balancer Charger
£22.95
2200mah 11.1v 25c+
Spec.
Input Voltage: 11~18v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~5.0A
Discharge current range: .1~1.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 580g
Dimensions: 133x87x33mm
- 11 -
£34.36
Greenair Catalogue
#0987
Turnigy 420 Balancer Charger
#0678
£26.80
19:17 GMT: Fri Dec 04 2009
C20 19g 2100Kv Brushless Outrunner
£9.95
.5-2A Balancer Charger
#1024
Turnigy 6 Balancer Charger
£39.95
Turnigy Acu-6 Balancer Charger
£41.60
KV:2100
Max Current:6A
Shaft Dia.:3mm
Dia.:20mm
Length:33mm
Poles:6
Weight:20g (17
without mount)
Bearing tube Dia.:
8mm
Recommended
prop (2s):7"x4" or
7"x5" or 8"x4"
Recommended
prop (3s):5"x3"
#1036
#0679
Electrical:Electric motors
#1116
A2217K-6
£16.97
Type: A2217/6
No. Of cells: 3-4 Li-Poly/ 8-12 Ni-Mh/Ni-Cd
RPM/V:1500 KV
Max. efficiency:78%
No load current / 10 V:1.6 A
Current capacity:28A/60 s
Recommended working current: 8 - 22A
(efficient > 70%)
Internal Resistance: 100 mÎ©
#0680
Dimensions:28x35 mm
Shaft diameter: 4 mm
Prop shaft adaptor output: 6mm
Weight:70.8g / 2.49 oz
Includes:
1 x brushless motor
1 x cross type motor mount
1 x aluminum prop adapter
4 x countersunk screws
AX 1404 2200kv
£11.19
Small stuff
#0117
C23 2300/2000Kv Brushless
Designers Choice of
motor for our Pusher
Jets & 16th Scale
Warbirds.
#0116
B-400 2700KV brushless outrunner
Budget replacement for
Mega 16/15/3 or /4 in fast jet
applications.
Equipped with cooling fins as
standard.
#0952
£19.95
KV:2300
Idle current:1.7A
Shaft dia.:3.17mm (1/8")
Dia.:28mm
Length:50mm Inc shaft
Prop (3s):5"x3" to
5"x5"Eqyupped with
cooling fins.
B2445/06 3790 kv B-less
Budget replacement for
EDF-64
£14.95
KV:2900
Max Current:7A
Shaft Dia.:3mm
Dia.:20mm
Length:33mm
Poles:6
Weight:20g (17
without mount)
Bearing tube Dia.:
8mm
Recommended
prop (2s):6"x4"
Recommended
prop (3s):5"x4.3"
Recommended prop without gearbox: 8 x 4 to 9 x 5.
#0962
£14.95
KV:2500
Max Current:7A
Shaft Dia.:3mm
Dia.:20mm
Length:33mm
Poles:6
Weight:20g (17
without mount)
Bearing tube Dia.:
8mm
Recommended
prop (2s):7"x4"
Recommended
prop (3s):5"x3"
#0114
£19.95
KV:3790
Idle current:1.7A
Shaft dia.:2mm
Dia.:24mm
Length:50mm Inc
shaft
:.
- 12 -
KV:2300/2000
Max Current:16A
(18A burst)
Shaft Dia.:3mm
Dia:28.5 mm
Length:38.5mm
Prop (2s):7" x 5"
Prop (3s):6" x 4" /
6.5" x 5"
GAD 10g 2000Kv Brushless Outrunner
Micro sized motor.
Tightly hand wound with
thick gauge copper.
Well machined and
balanced.
£14.00
KV:2000
Max Current:6A
Shaft Dia.:2mm
Dia.:18mm
Length:30mm
Poles:6
Weight:10g
Bearing tube Dia.:
8mm
Recommended
prop (2s):7"x4" or
7"x5" (2s)
Recommended
prop (3s):5"x3" (3s)
£8.95
Greenair Catalogue
#0828
GAD 5g 2000Kv outrunner
Micro sized motor.
Tightly hand wound
with thick gauge
copper.
Well machined and
balanced.
Use 2s ONLY.
#0902
#1051
£8.95
19:17 GMT: Fri Dec 04 2009
Hyperion Y-12 5300kv Brushles
£19.89
High KV fan motor
KV:2000
Max Current:4A
Shaft Dia.:1.5mm
Dia.:18mm
Length:30mm
Poles:6
Weight:5g
Bearing tube Dia.:
8mm
Recommended
prop (2s):5x5.5 " or
4.75x4.75 (2s)
Hoffman 'Beast'
KV:5300
Idle current:1.7A
Shaft dia.:1.5
Dia.:12mm
Length:50mm Inc
shaft
EDF TYPE:40mm
GWS
#1052
Hyperion Y-12 5800kv Brushles
£19.89
High KV fan motor
KV:5300
Idle current:1.7A
Shaft dia.:1.5
Dia.:12mm
Length:50mm Inc
shaft
EDF TYPE:40mm
GWS
£85.95
70mm â Beastâ • Specs:
Kv- 4130, R (ohms)- 0.0085, Weight- 130 grams, 1/8th shaft
size.
Application-70mmEDF
Battery- 4s-5s lipo, 1700 watts.
#0983
71amps on 4s Rhino 3000mah 25-37c lipo & 100amps on a 5s Rhino 3750
lipo
Turnagy 80-125amp
Wemo 480 fan was 83 amps on 4s, 111amps on 5s Over 3lbs of thrust on
4s with both fans, and over 4lbs of thrust with 5s
#0904
Hoffman 'Mighty Mite'
JP 6800kv 2030 Brushless
High KV fan motor
Connectors and Prop
adaptors - included
Working current - 3-8A :
Peak 10A
Suggested Prop size 3x2 - 4x3 direct (Suits
Gearbox 4447010)
Motor Size - 20x31mm.
(Shaft diameter -
Our picks: Wemotec 68mm or Schubler 70mm fan
2.0mm)
Speed Controller requirement - 15A
Glow Engine equivalent - .049
£64.95
£25.40
Kv:6800
Current:3-8A (10A
burst)
Weight:46g
Size:20mmx31mm
Shaft size:2.0mm
Prop sizes:3x2 or
4x3
Battery:6-10cell
NiMH 2-3 cell
Li-Poly
ESC:18A
recommended
60mm â Mighty Miteâ •
Specs: Kv-4620, R (ohms)- 0.021, Weight- 75 grams, 3mm shaft.
#0681
Motor 21g 1700Kv Brushless Outrunner
Medium speed motor
suitable for slower
models.
A nice motor on 2s for
vintage style models with
7x4 or 8x4 prop.
On 3s suits a Depron
warbird well.Notsupplied
with backmount.
Application-50-60mm EDF
Our picks: Wemotec 50mm Micro Fan or Alfa 5-blade fan
Turnagy 40 esc,
Rhino 4s 2250mah 25-37c; should draw around 42amps (Static)
This EDF is 'THE' EDF Motor since the Mega revolution of 2004, you are
look at up to 2lbs of thrust from this motor in the Alfa Fan
#0903
Hoffman 'Wild Beast'
#0115
£85.95
Motor 21g 3000Kv Brushless Outrunner
High revving motor
suitable for fast pusher
jets.
70mm â Beastâ • Specs:
Kv- 4130, R (ohms)- 0.0085, Weight- 130 grams, 1/8th
shaft size.
Application-70mmEDF
Our picks: Wemotec 68mm or Schubler 70mm fan
71amps on 4s Rhino 3000mah 25-37c lipo & 100amps on a 5s Rhino 3750
lipo
#0118
Turnagy 80-125amp
£10.00
KV:1700
Max current:8A (9A
burst)
Idle current:0.5A
Weight:21g
Diameter:
Shaft dia.:3mm
Post post dia.:8mm
Prop (3s):6" x 4" or
6"x5.5" or 7"x5"
Prop (2s):7"x4" or 8"
x 4"8" x 4"
£9.95
KV:3000
Max current:15A
(18A burst)
Idle current:1.2A
Weight:21g
Diameter:
Shaft dia.:3mm
Post post dia.:8mm
Prop (3s):4.75" x
4.75"
Prop (2s):6" x 4"
Motor 24g/21g/19g 8mm Mount
£1.50
Suits all 8mm 'pole' type motors.
Wemo 480 fan was 83 amps on 4s, 111amps on 5s Over 3lbs of thrust on
4s with both fans, and over 4lbs of thrust with 5s
#0772
HXT 2040 (130L) 4850kv Brushles
£19.95
High KV fan motor
KV:2300
Idle current:1.7A
Shaft dia.:3.17mm
(1/8")
Dia.:28mm
Length:50mm Inc
shaft
Prop (3s):5"x3" to
5"x5"Eqyupped with
cooling fins.
#0942
Turnigy 2836 3700kv EDF Motor
800w EDF motor
3.175 shaft
30-40A esc required.
- 13 -
£19.95
Greenair Catalogue
#0726
Turnigy 3530 1100
#0897
£19.95
200W motor for Vintage/scale projects
#0113
Turnigy 3530 1700
19:17 GMT: Fri Dec 04 2009
Esc Brushless 10A-12A (BUDGET)
This is a great little 12A BESC, very
light and very stable.
This is the newer generation, with a
much smoother throttle curve.
The BESC weighs 9g, however if you
change the wires and remove the
heatshrink it can be around 6-7g
£19.95
£7.95
Max Current:10A (12A burst)
BEC:1.5A max, derate for 3s
LIPO
Timing:Auto
PWM freq:8KHz
Max Voltage:3s LIPO, 12 Nickel
cells
Weight:9g
Class motor for jets
#0018
#1126
Turnigy 3536 1400kv
Model: SK35-36 1400
Kv: 1400rpm/v
Turns: 5
Resistance: 37
Idle Current: 1.9A
Shaft: 4mm
Weight: 115g
Rated Power: 550w
ESC: 40A
Cell count: 3~4 Lipoly
Suggested Prop: 9*4.5, 10*4.7, 6*5
Power equivalent : .30 to .40 glow engine
£22.70
KV:1400
Io:3.5A
Rm:25mohm
Weight:171g
Current:25-35A
(45A burst)
Shaft dia.:5mm
Prop range:9*4.5,
10*4.7, 6*5
Turnigy 3548 1100
600W motor for
Vintage/scale projects
TURNIGY AerodriveXp
SK Series AerodriveXP
SK Series motors are
designed for those who
want the very best in
outrunner technology
for their R/C plane.
Typically an efficiency improvement of around
8-10% can be seen over similar classed motors.
#1136
User Programmable, both via controller and
optional programming card. The programming card
is an excellent item as it instantly tells the user the
current settings and with a few simple clicks of the
buttons, the user can change the settings and have
graphical reassurance of those changes.
£30.95
An excellent replacement for .43 ~ .61 size
planes.
#0821
Model: TR42-60A
Speed : 500Kv
Max Efficiency : 38A
Max Load : 50A
Weight : 280grams
Lipo Cell requirements: 3~7cell
No Load Current : 4.3A
#1035
Turnigy T2211 2300kv
Esc Brushless 40A
Esc Brushless 60A
60A brushless ESC for 2-6 Cell Lipos
Plush 60A Brushless Speed Controller
The plush series ESC are a very good quality
controller. They have a broad range of
programming features and a smooth throttle
response compared to other BESCs in the
same price range.
This BESC can handle 3A continuous current
which is great for larger planes with bigger
£11.19
Small stuff
servos.
Cont Current: 60A
Burst Current: 80A
BEC Mode: Switching
BEC : 5v / 3A
Input: 5.6v-22v
Weight: 60g
Size: 80x31x14mm
Supported motor speed for all TURNIGY ESCs is;
(Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12
poles).
Electrical:Electronic speed controls
#0019
Esc Brushless 10A-12A
This is a great little 12A
BESC, very light and
very stable.
This is the newer
generation, with a much
smoother throttle curve.
The BESC weighs 9g,
however if you change
the wires and remove
the heatshrink it can be
£22.95
Max Current:18A
Burst Current:22A
Weight:19g
Length:45mm
Width:24mm
Depth:11mm
Max voltage:4s
LIPO
BEC:2A, but derate
for 3s/4s operation
LVC:Automatic
Brake:
Programmable
£29.95
40A brushless ESC for 2-4 Cell Lipos
Resistance: 23mh
Power: 900W
Shaft: 5mm
Suggested prop: 13x10e ~ 20x10e
#0961
Max Current:18A
Burst Current:22A
Weight:19g
Length:45mm
Width:24mm
Depth:11mm
Max voltage:4s LIPO
BEC:2A, but derate
for 3s/4s operation
LVC:Automatic
Brake:Programmable
Esc Brushless 25A
TURNIGY PRO 25A
Brushless Speed
Controller
The Plush series ESC
are a very good quality
controller. They have a
broad range of
programming features
and a smooth throttle
response compared to other BESCs int he same
price range.
£30.95
KV:1100
Io:3.5A
Rm:25mohm
Weight:171g
Current:25-35A
(45A burst)
Shaft dia.:5mm
Prop range:to
13x10 (3s) or 12x6
(4s)
Turnigy 42.60 500kv
£16.95
User Programmable, both via controller and
optional programming card. The programming
card is an excellent item as it instantly tells the
user the current settings and with a few simple
clicks of the buttons, the user can change the
settings and have graphical reassurance of those
changes.
#1090
#0944
Esc Brushless 18A
TURNIGY Plush 18
Brushless Speed
Controller
The Plush series ESC
are a very good quality
controller. They have a
broad range of
programming features
and a smooth throttle
response compared to
other BESCs int he same price range.
£12.95
Max Current:10A
(12A burst)
BEC:1.5A max,
derate for 3s LIPO
Timing:Auto
PWM freq:8KHz
Max Voltage:3s
LIPO, 12 Nickel cells
Weight:9g
User Programmable, both via controller and optional programming card.
The programming card is an excellent item as it instantly tells the user the
current settings and with a few simple clicks of the buttons, the user can
change the settings and have graphical reassurance of those changes.
The programming card is an excellent Item and simple to use!
around 6-7g
- 14 -
£48.93
Greenair Catalogue
Electrical:Lighting & Sundries
#1004
Electrical:Radio equipment:Other avionics
LED 'Green' High Bright
#0988
£0.11
3mm LED White
#1002
LED 'Orange' High Bright
#0323
£0.11
LED 'Pink' High Bright
£0.11
LED 'Red' High Bright
£0.11
LED 'White' High Bright
£0.11
LED Wire 'Green'
£1.55
LED Wire 'Orange'
£1.75
#0826
LED Light wire weight
Electrical:Radio equipment:2.4g Tx / RX Combos
#0995
Assan 2.4Ghz Futaba Combo
2.4GHz Tx Module
(Futaba) for Assan X8
systems.
Compatible with all X8
#0935
£26.95
size:50mm x 26mm x
10mm
weight:8g
Key Features
-Highly secure and
robust link
-No crystals or channels
needed
-No interference from motors, ignition or metal to
metal friction.
-Long antenna
-No need to change any settings on your radio.
-Works with all X8 systems.
for Futaba 7,8,9 series tx`s (with module slot)
&
#0827
2.4GHz receiver for Assan X8 systems.
Compatible with all X8 transmitters.
Assan 2.4Ghz X7 channel Rx
2.4GHz receiver for
Assan X8 systems.
transmitters.
Key Features
-Highly secure and robust link
-No crystals or channels needed
metal friction.
-Long antenna
Assan 2.4Ghz JR Combo
size:50mm x 26mm x
10mm
weight:10g
Assan 2.4Ghz X7 (long) CH Rx
2.4GHz receiver for
Assan X8 systems.
(Long Aerial)
transmitters.
Key Features
metal friction.
-Long antenna
2.4GHz Tx Module (Futaba)
for Assan X8 systems.
transmitters.
£23.95
£95.00
weight:10g
size:50mm x 26mm
x 10mm
transmitters.
#1102
Assan 2.4Ghz X6 channel Rx
Key Features
-Highly secure and
robust link
needed
metal friction.
-Long antenna
Led Wire Light Weight
#1003
£9.94
2.4GHz receiver for
Assan X8 systems.
transmitters.
3mm LED White
#0999
V Tail Mixer
Electrical:Radio equipment:Receivers
3mm LED White
#0998
£4.95
Mixer for aircraft that have elevons or V tails, for non computerised
transmitter systems.
3mm LED White
#1001
3A 3-8s Input BEC
3A 3-8s input BEC
3mm LED White
#1000
19:17 GMT: Fri Dec 04 2009
£31.92
size:50mm x 26mm x
10mm
weight:8g
Key Features
-Highly secure and robust
link
needed
metal friction.
-Long antenna
£95.00
size:50mm x 26mm x
10mm
weight:10g
#1103
Assan 2.4Ghz X9 (long) CH Rx
2.4GHz receiver for
Assan X8 systems.
(Long Aerial)
transmitters.
Key Features
-Highly secure and robust
link
needed
-No interference from motors, ignition or
metal to metal friction.
-Long antenna
-No need to change any settings on your
radio.
£38.31
size:50mm x 26mm
x 10mm
weight:8g
Key Features
-Highly secure and
robust link
metal friction.
-Long antenna
&
#0682
2.4GHz receiver for Assan X8 systems.
Compatible with all X8 transmitters.
Blue Arrow 35Mhz 6ch DSP micro
This reciever is a very
good glitch free
lightweight 6 channel
receiver.
Key Features
-No interference from motors, ignition or
metal to metal friction.
-Long antenna
radio.
Although only specified
for park fly ranges (up to 300m/100ft) in practice
range and sensitivty are much more than that: at
altutude over a km is achievable.
A good solid performer for all smaller models.
Use with GWS mini crystals.
- 15 -
Channels:6
Weight:5.3g
(0.19oz) without
shrinkwrap
Sensitivity:2Î¼V
Selectivity:-53dB
Â±8Khz
Dimensions:35mm
x 15mm x 10mm
Decode:DSP shift
autosensing.
Operating voltage:
4.8V-6V
Current
consumption:10mA
Modulation
schema:FM/PPM
Crystal:GWS style
mini Crystal required
£17.50
Greenair Catalogue
#0316
Rx Corona 35Mhz 4ch DSP micro
Throw away your
crystals, say goodbye to
glitches! The new
Corona synthesized
receiver is here!
This unit will work with
existing Synthesized
transmitters or crystal
transmitters. In fact the
accuracy of this receiver will improve the
performance of all 35mhz crystal transmitters.
The RP4S1 is the smallest and lightest
synthesized system available today. This small
size does not impact on reception quality or
performance as this unit has the longest range
available from any Corona receiver plus a
sensitivity greater than 2uV. Tests have shown
the range to be more than 1 mile!
19:17 GMT: Fri Dec 04 2009
#1148
£24.95
Himodel 12g servo MG
A great workhorse, at a budget price,
for small and fast or even large and
slow.
Suitable for up to 60" Vintage Models
Teflon Bushing, 15cm wire, coreless
motor
Channels:4
Weight:4g (0.140z)
without shrinkwrap
Sensitivity:2Î¼V
Selectivity:-65dB
Â±8Khz
Front end:Dual
tuned RF
IF filtering:Dual 4
pole ceramic filters
Operating voltage:
4.8V-6V
Current
consumption:11mA
Modulation
schema:FM/PPM
(with auto shift
detect)
#0320
£8.68
Size:21x12x22 mm /
0.74x0.42x0.78 in
Weight:16g / 0.32oz
Voltage:3v ~ 6v
Speed:0.12 sec/60(4.8V)
Torque:2.7 kg-cm
Working Temp:-30C-60C
Servo Extension Lead 15cm
£1.95
Extension Lead 15cm
The new technology put into the synthesized
series of Corona receivers is truly outstanding and
will certainly make you think twice about
upgrading to a more expensive 2.4GHz.
Take a look at Corona's website
(http://www.corona-rc.com/index.php?option=com_content&task=view&id=26&itemid=56)
for more details.
#0924
Servo Extension Lead 30cm
£0.97
Extension Lead 30cm
Electrical:Radio equipment:Servos
#0824
2.5g Servo
Super small, only 2.5g!!
Torque: .17kg
Weight: 2.5g (.088oz)
Speed: .12sec / 60deg
Voltage: 4.8v/6.0v
Size: 19.6x18.8mm
Connector: JST
#0317
£14.76
Hextronik 3.5g servo
Tiny and tough, built
with small lightweight
planes in mind - indoor
flyers and smaller
parkflyers.
All servos are backed by
our 12 month warranty.
#0322
Size:19.6x18.8mm
Weight:2.5g
Voltage:4.8-6V
Speed:.12sec /
60deg)
Torque:.17kg
Electrical:Radio equipment:Transmitters
Size:19mm x 26mm
x 8mm
Voltage:3-6V
Speed:0.12 s/60deg
@ 6v
Weight:3.7g
Hextronik 16g servo MG
A great workhorse, at a
budget price, for small
and fast or even large
and slow.
Suitable for up to 60"
Vintage Models
Teflon Bushing, 15cm
wire, coreless motor
#0936
Assan 2.4Ghz Futaba Module
2.4GHz Tx Module (Futaba)
for Assan X8 systems.
transmitters.
£16.95
Size:21x12x22 mm /
0.74x0.42x0.78 in
Weight:16g / 0.32oz
Voltage:3v ~ 6v
Speed:0.12
sec/60(4.8V)
Torque:2.7 kg-cm
Working Temp:
-30C-60C
Hextronik 5g Servo
Good performance at a
budget price
Aircraft
#0319
size:50mm x 26mm x
10mm
weight:10g
Electrical:Wire and connectors
12 Swg Silicone Wire Per M
£2.35
#1069
4mm Gold Connectors 1 Pair
£0.64
#1030
4mm Gold Connectors 10 Pairs
£7.95
12Swg Red & Black Wire
High strand count
£3.90
Size:ize :
22.9x11.4x22 mm /
0.9x0.45x0.87 in
Weight:5g
Voltage:3-6V
Speed:0.10
sec/60(4.8V)
Torque:0.8 kg-cm
Temp range:
-30C~60C
Hextronik 9g servo
A great workhorse, at a
budget price, for small
and fast or even large
and slow.
Vintage Models
£59.95
Key Features
needed
-No interference from motors,
ignition or metal to metal friction.
-Long antenna
radio.
#0989
#0318
£2.50
£9.85
Superb for anything
from Flying Scale to 150
Range, or aileron servos where space is tight.
#0943
Servo Y Lead 15Cm
Y Lead 15Cm
£3.95
Size:21x12x22 mm /
0.74x0.42x0.78 in
Weight:9g / 0.32oz
Voltage:3v ~ 6v
Speed:0.12
sec/60(4.8V)
Torque:1.6 kg-cm
Working Temp:
-30C-60C
- 16 -

Untitled - Green Air Designs

Transcription

Similar documents

Where you come to know.

Johnny Tremain by Esther Forbes Objectives

SKYBOT HAND

official press kit 2015

ckc- St. LOUIS EXHIBITOR COUPONS 2016

Get It Together!

45 Plateau Incentive Program

Peterman Lumber Inc.

Euro-Diagnostic Resources, Inc. Euro Auto Training

Display Sell Sheet - Top Notch Distributors, Inc.