Reflex Sensors for Measuring Tasks

280
Reflex Sensors for Measuring Tasks The Sensors measure the distance between the Sensor and the object. They work with laser light (red), red light or infrared light after
the triangulation principle. For this reason, the object’s color, shape and surface characteristics have practically no influence on measurement results. A voltage within a range of 0 … 10 V DC is made available so an analog output or as current value from 4 … 20 mA.
Applications
••
••
••
••
••
••
••
High precision positioning
Thickness, height and distance measurements
Static and dynamic differential measurements
Diameter monitoring
Vibration measurement
Contour measurement
Monitoring of two-layer materials
281
CP08/CP24/CP35/OCP801/OCP162/OCP352
The output signal of the diffuse light Sensor with CMOS line
array technology is practically independent of brightness, color
and surface characteristics of the object to be measured.
The measured value can be read out as a voltage value within a
range of 0 … 10 V, as a current value within a range of 4 … 20 mA,
or in digital format via the RS-232 interface. A rising or falling
characteristic curve can be selected.
Optionally high speed (Speed-Mode) or high resolution (Resolution-Mode) can be selected. Teach-In, filter functions, error
outputs and a RS-232 interface are available.
The measuring range can be selected individually within the
Sensor’s working range. A precise error message is generated
if the measuring range is exceeded, or in the event of non-­
measurable surfaces or system errors.
HT_MGV80
Laser Class
These Sensors are equipped with an analog output, as well as a
switching output. ON and OFF points can be adjusted with the
help of two potentiometers. The devices are thus especially well
suited for Go/No-Go applications.
The Sensors function in accordance with the principle of triple
beam correction, rules out edge effects and angle error independent of mounting position.
Sensors with laser class 1 have the smallest laser capacity
according to EN 60825-1 and make warning signs redundant.
Due to their higher light capacity Sensors with laser class 2
achieve better specifications.
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
282
Reflex Sensors
for Measuring Tasks
43...53 mm
Working Range
LASER
Technical Data
Optical Data
Working Range
43...53 mm
Measuring Distance
48 mm
Measuring Range
10 mm
Linearity
0,5 %
Light Source
Laser (red)
Wave Length
660 nm
Service Life (T = +25 °C)
100000 h
Laser Class (EN 60825-1)
2
max. Ambient Light
10000 Lux
Light Spot Diameter
0,5 mm
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 30 mA
Temperature Drift (Tu < 10 °C, Tu > 40 °C)
5 µm/K
Temperature Drift (10 °C < Tu < 40 °C)
5 µm/K
Temperature Range
-10...60 °C
Error Output Voltage Drop
< 2,5 V
PNP Error Output/Switching Current
200 mA
Analog Output
0...10 V
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Cut-Off Frequency up to 1 kHz
Overload Protection
yes
Protection Class
III
Linearity: 0,5 %
Mechanical Data
Measuring Range: 10 mm
Housing
Plastic
Full Encapsulation
yes
Resolution up to 2 µm
Degree of Protection
IP67
Connection
M12 × 1
These sensors are equipped with an analog output and
can thus be utilized for measuring tasks. The output signal is practically independent of the object´s color. High
resolution and a wide variety of measuring ranges allow
for use in innumerable applications.
1 = Transmitter Diode
2 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
283
YP05MGVL80
< 20 µm
< 4 µm
Cut-Off Frequency
1 kHz
100 Hz
Response Time
500 µs
5 ms
Connection Diagram No.
503
503
Control Panel No.
P3
P3
Part Number
YP05MGV80
Plug Version
Error Output
Analog Output
Resolution
Suiting Connection Technology No.
Suiting Mounting Technology No.
80
380
80
380
Connection Diagrams page 952 / System Components page 828
Complimentary Products
Analog Evaluation Unit AW02
Protection Housing Set ZSP-NN-02
Protection Housing ZSV-0x-01
Error of Measurement
Typical characteristic curve based on Kodak white, 90 %
YP05MGV80
Ctrl.Panel
03
12
dSr/mm
P3
0.3
0.2
0.1
0.0
-0.1
-0.2
-0.3
-0.4
43
44
45
46
47
48
49
50
51
52
53
Sr/mm
03 = Error Indicator
12 = Analog Output Indicator
Sr = Switching Distance
black 6 %
dSr = Switching Distance Change
Aluminum
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
284
Reflex Sensors
for Measuring Tasks
40...60 mm
Working Range
LASER
Technical Data
Optical Data
Working Range
40...60 mm
Measuring Distance
50 mm
Measuring Range
20 mm
Linearity
0,5 %
Light Source
Laser (red)
Wave Length
660 nm
Service Life (T = +25 °C)
100000 h
Laser Class (EN 60825-1)
2
max. Ambient Light
10000 Lux
Light Spot Diameter
0,5 mm
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 30 mA
Temperature Drift (Tu < 10 °C, Tu > 40 °C)
10 µm/K
Temperature Drift (10 °C < Tu < 40 °C)
7 µm/K
Temperature Range
-10...60 °C
Error Output Voltage Drop
< 2,5 V
PNP Error Output/Switching Current
200 mA
Analog Output
0...10 V
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Cut-Off Frequency up to 1 kHz
Overload Protection
yes
Protection Class
III
Linearity: 0,5 %
Mechanical Data
Measuring Range: 20 mm
Housing
Plastic
Full Encapsulation
yes
Resolution up to 5 µm
Degree of Protection
IP67
Connection
M12 × 1
These sensors are equipped with an analog output and
can thus be utilized for measuring tasks. The output signal is practically independent of the object´s color. High
resolution and a wide variety of measuring ranges allow
for use in innumerable applications.
1 = Transmitter Diode
2 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
285
YP06MGVL80
< 40 µm
< 10 µm
Cut-Off Frequency
1 kHz
100 Hz
Response Time
500 µs
5 ms
Connection Diagram No.
503
503
Control Panel No.
P3
P3
Part Number
YP06MGV80
Plug Version
Error Output
Analog Output
Resolution
Suiting Connection Technology No.
Suiting Mounting Technology No.
80
380
80
380
Connection Diagrams page 952 / System Components page 828
Complimentary Products
Analog Evaluation Unit AW02
Protection Housing Set ZSP-NN-02
Protection Housing ZSV-0x-01
Error of Measurement
Typical characteristic curve based on Kodak white, 90 %
YP06MGV80
Ctrl.Panel
dSr/mm
P3
0.2
0.0
-0.2
03
12
-0.4
-0.6
-0.8
-1.0
-1.2
-1.4
40
42
44
46
48
50
52
54
56
58
60
Sr/mm
03 = Error Indicator
12 = Analog Output Indicator
Sr = Switching Distance
black 6 %
dSr = Switching Distance Change
Aluminum
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
286
Reflex Sensors
for Measuring Tasks
30...80 mm
Working Range
LASER
Technical Data
Optical Data
Working Range
30...80 mm
Measuring Range
50 mm
Resolution
< 8 µm
Resolution (Speed-Mode)
< 12 µm
Linearity
0,1 %
Linearity (Speed-Mode)
0,2 %
Light Source
Laser (red)
Wave Length
660 nm
Service Life (T = +25 °C)
100000 h
max. Ambient Light
10000 Lux
Light Spot Diameter
see Table 1
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 80 mA
Temperature Drift
< 5 µm/K
Temperature Range
-25...50 °C
Analog Output
0...10 V
Current Load Voltage Output
< 1 mA
Analog Output
4...20 mA
Current Output Load Resistance
< 500 Ohm
Interface
RS-232
High resolution 8 µm (Resolution-Mode)
Baud Rate
38400 Bd
Protection Class
III
Linearity 0,1 % (Resolution-Mode)
Mechanical Data
Response Time < 660 µs (Speed-Mode)
Adjustment
Teach-In
Housing
Plastic
Zoom function
Degree of Protection
IP67
Connection
M12 × 1
The sensor uses a high-resolution CMOS line array and
DSP technology, virtually eliminating material, colour and
brightness related measurement value differences. The
Measurement range is calibrated accurate to 10µm.
Integrated analogue output can be configured for voltage 0...10 V (10...0 V) or current 4...20 mA (20...4 mA).
1 = Transmitter Diode
2 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
287
OCP801H0180
Part Number
CP08MHT80
Plug Version
Error Output
Analog Output
RS-232 Interface
Laser Class (EN 60825-1)
Measurement Rate
Measurement Rate (Resolution-Mode)
2
1
1500 /s
1000 /s
600 /s
500 /s
Response Time
< 660 µs
< 1000 µs
Response Time (Resolution Mode)
< 1660 µs
< 2000 µs
Connection Diagram No.
529
529
Control Panel No.
P7
P7
Suiting Connection Technology No.
80
Suiting Mounting Technology No.
380
80
380
Connection Diagrams page 952 / System Components page 828
Complimentary Products
Analog Evaluation Unit AW02
Interface Cable S232W3
Protection Housing Set ZSP-NN-02
Protection Housing ZSV-0x-01
Table 1
Working Distance
Light Spot Size
30 mm
80 mm
0,5 × 1 mm
1 × 2 mm
Output Graph
Ctrl.Panel
10
25
63 12 03
24
a U/V
P7
5.0
07
c
0.0
03 = Error Indicator
25 = Minus Button
07 = Selector Switch
63 = Analog Output Current Indicator
12 = Analog Output Indicator
24 = Plus Button
0
c = Measuring Range
a = Analog Voltage Output
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
288
Reflex Sensors
for Measuring Tasks
50...100 mm
Working Range
LASER
Technical Data
Optical Data
Working Range
50...100 mm
Measuring Distance
75 mm
Measuring Range
50 mm
Linearity
0,5 %
Light Source
Laser (red)
Wave Length
660 nm
Service Life (T = +25 °C)
100000 h
Laser Class (EN 60825-1)
2
max. Ambient Light
10000 Lux
Light Spot Diameter
1 mm
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 30 mA
Temperature Drift (Tu < 10 °C, Tu > 40 °C)
20 µm/K
Temperature Drift (10 °C < Tu < 40 °C)
10 µm/K
Temperature Range
-10...60 °C
Error Output Voltage Drop
< 2,5 V
PNP Error Output/Switching Current
200 mA
Analog Output
0...10 V
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Cut-Off Frequency up to 1 kHz
Overload Protection
yes
Protection Class
III
Linearity: 0,5 %
Mechanical Data
Measuring Range: 50 mm
Housing
Plastic
Full Encapsulation
yes
Resolution up to 20 µm
Degree of Protection
IP67
Connection
M12 × 1
These sensors are equipped with an analog output and
can thus be utilized for measuring tasks. The output signal is practically independent of the object´s color. High
resolution and a wide variety of measuring ranges allow
for use in innumerable applications.
1 = Transmitter Diode
2 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
289
YP11MGVL80
< 100 µm
< 25 µm
Cut-Off Frequency
1 kHz
100 Hz
Response Time
500 µs
5 ms
Connection Diagram No.
503
503
Control Panel No.
P3
P3
Part Number
YP11MGV80
Plug Version
Error Output
Analog Output
Resolution
Suiting Connection Technology No.
Suiting Mounting Technology No.
80
380
80
380
Connection Diagrams page 952 / System Components page 828
Complimentary Products
Analog Evaluation Unit AW02
Protection Housing Set ZSP-NN-02
Protection Housing ZSV-0x-01
Error of Measurement
Typical characteristic curve based on Kodak white, 90 %
YP11MGV80
Ctrl.Panel
03
12
dSr/mm
P3
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
50
55
60
65
70
75
80
85
90
95
Sr/mm
03 = Error Indicator
12 = Analog Output Indicator
Sr = Switching Distance
black 6 %
dSr = Switching Distance Change
Aluminum
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
290
Reflex Sensors
for Measuring Tasks
40...160 mm
Working Range
LASER
Technical Data
Optical Data
Working Range
40...160 mm
Measuring Range
120 mm
Resolution
< 20 µm
Resolution (Speed-Mode)
< 30 µm
Linearity
0,1 %
Linearity (Speed-Mode)
0,2 %
Light Source
Laser (red)
Wave Length
660 nm
Service Life (T = +25 °C)
100000 h
max. Ambient Light
10000 Lux
Light Spot Diameter
see Table 1
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 80 mA
Temperature Drift
< 10 µm/K
Temperature Range
-25...50 °C
Analog Output
0...10 V
Current Load Voltage Output
< 1 mA
Analog Output
4...20 mA
Current Output Load Resistance
< 500 Ohm
Interface
RS-232
High resolution 20 µm (Resolution-Mode)
Baud Rate
38400 Bd
Protection Class
III
Linearity 0,1 % (Resolution-Mode)
Mechanical Data
Response Time < 660 µs (Speed-Mode)
Adjustment
Teach-In
Housing
Plastic
Zoom function
Degree of Protection
IP67
Connection
M12 × 1
The sensor uses a high-resolution CMOS line array and
DSP technology, virtually eliminating material, colour and
brightness related measurement value differences. The
Measurement range is calibrated accurate to 10µm.
Integrated analogue output can be configured for voltage 0...10 V (10...0 V) or current 4...20 mA (20...4 mA).
1 = Transmitter Diode
2 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
291
OCP162H0180
Part Number
CP24MHT80
Plug Version
Error Output
Analog Output
RS-232 Interface
Laser Class (EN 60825-1)
Measurement Rate
Measurement Rate (Resolution-Mode)
2
1
1500 /s
1000 /s
600 /s
500 /s
Response Time
< 660 µs
< 1000 µs
Response Time (Resolution Mode)
< 1660 µs
< 2000 µs
Connection Diagram No.
529
529
Control Panel No.
P7
P7
Suiting Connection Technology No.
80
Suiting Mounting Technology No.
380
80
380
Connection Diagrams page 952 / System Components page 828
Complimentary Products
Analog Evaluation Unit AW02
Interface Cable S232W3
Protection Housing Set ZSP-NN-02
Protection Housing ZSV-0x-01
Table 1
Working Distance
Light Spot Size
40 mm
160 mm
0,5 × 1,2 mm
1 × 2,5 mm
Output Graph
Ctrl.Panel
10
25
63 12 03
24
a U/V
P7
5.0
07
c
0.0
03 = Error Indicator
25 = Minus Button
07 = Selector Switch
63 = Analog Output Current Indicator
12 = Analog Output Indicator
24 = Plus Button
0
c = Measuring Range
a = Analog Voltage Output
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
Reflex Sensors
292
for Measuring Tasks
150...250 mm
Working Range
LASER
Technical Data
Optical Data
Working Range
150...250 mm
Measuring Distance
200 mm
Measuring Range
100 mm
Resolution
200 µm
Linearity
1%
Light Source
Laser (red)
Wave Length
660 nm
Service Life (T = +25 °C)
100000 h
Laser Class (EN 60825-1)
2
max. Ambient Light
10000 Lux
Light Spot Diameter
1 mm
at a Distance of
200 mm
Focus Distance
100 mm
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 25 mA
Cut-Off Frequency
250 Hz
Response Time
2 ms
Temperature Drift
50 µm/K
Temperature Range
-10...60 °C
Error Output Voltage Drop
< 2,5 V
Analog Output: 0...10 V DC
Analog Output
0...10 V
Short Circuit Protection
yes
Error Output
Reverse Polarity Protection
yes
Linearity: 1 %
Overload Protection
yes
Protection Class
III
Triple Beam Correction Principle
Mechanical Data
Housing
Plastic
Degree of Protection
IP67
Connection
M12 × 1
These sensors are equipped with an analog output and
can thus be utilized for measuring tasks. The output signal is practically independent of the object´s color. High
resolution and a wide variety of measuring ranges allow
for use in innumerable applications.
1 = Receiver Diode
2 = Transmitter Diode
3 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
293
YT25MGV80
Part Number
Plug Version
Error Output
Analog Output
Connection Diagram No.
503
Control Panel No.
T3
Suiting Connection Technology No.
Suiting Mounting Technology No.
80
330
Connection Diagrams page 952 / System Components page 828
Complimentary Products
Analog Evaluation Unit AW02
Error of Measurement
Typical characteristic curve based on Kodak white, 90 %
YT25MGV80
Ctrl.Panel
12
03
dSr/mm
T3
5
0
-5
-10
-15
wenglor sensoric gmbh
Narzissenstr. 3
D-88069 Tettnang
TEL 07542/5399-0
FAX 07542/5399-988
-20
150 160 170 180 190 200 210 220 230 240 250
Sr/mm
03 = Error Indicator
12 = Analog Output Indicator
Sr = Switching Distance
black 6 %
dSr = Switching Distance Change
Aluminum
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
294
Reflex Sensors
for Measuring Tasks
50...350 mm
Working Range
LASER
Technical Data
Optical Data
Working Range
50...350 mm
Measuring Range
300 mm
Resolution
< 50 µm
Resolution (Speed-Mode)
< 80 µm
Linearity
0,15 %
Linearity (Speed-Mode)
0,2 %
Light Source
Laser (red)
Wave Length
660 nm
Service Life (T = +25 °C)
100000 h
max. Ambient Light
10000 Lux
Light Spot Diameter
see Table 1
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 80 mA
Temperature Drift
< 25 µm/K
Temperature Range
-25...50 °C
Analog Output
0...10 V
Current Load Voltage Output
< 1 mA
Analog Output
4...20 mA
Current Output Load Resistance
< 500 Ohm
Interface
RS-232
High resolution 50 µm (Resolution-Mode)
Baud Rate
38400 Bd
Protection Class
III
Linearity 0,15 % (Resolution-Mode)
Mechanical Data
Response Time < 1250 µs (Speed-Mode)
Adjustment
Teach-In
Housing
Plastic
Zoom function
Degree of Protection
IP67
Connection
M12 × 1
The sensor uses a high-resolution CMOS line array and
DSP technology, virtually eliminating material, colour and
brightness related measurement value differences. The
Measurement range is calibrated accurate to 10µm.
Integrated analogue output can be configured for voltage 0...10 V (10...0 V) or current 4...20 mA (20...4 mA).
1 = Transmitter Diode
2 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
295
OCP352H0180
Part Number
CP35MHT80
Plug Version
Error Output
Analog Output
RS-232 Interface
Laser Class (EN 60825-1)
Measurement Rate
Measurement Rate (Resolution-Mode)
2
1
800 /s
500 /s
400 /s
250 /s
Response Time
< 1250 µs
< 2000 µs
Response Time (Resolution Mode)
< 2500 µs
< 4000 µs
Connection Diagram No.
529
529
Control Panel No.
P7
P7
Suiting Connection Technology No.
80
Suiting Mounting Technology No.
380
80
380
Connection Diagrams page 952 / System Components page 828
Complimentary Products
Analog Evaluation Unit AW02
Interface Cable S232W3
Protection Housing Set ZSP-NN-02
Protection Housing ZSV-0x-01
Table 1
Working Distance
Light Spot Size
50 mm
350 mm
0,6 × 1,5 mm
1,5 × 4 mm
Output Graph
Ctrl.Panel
10
25
63 12 03
24
a U/V
P7
5.0
07
c
0.0
03 = Error Indicator
25 = Minus Button
07 = Selector Switch
63 = Analog Output Current Indicator
12 = Analog Output Indicator
24 = Plus Button
0
c = Measuring Range
a = Analog Voltage Output
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
Reflex Sensors
296
for Measuring Tasks
35...85 mm
Working Range
Technical Data
Optical Data
Working Range
35...85 mm
Measuring Distance
60 mm
Measuring Range
50 mm
Resolution
500 µm
Linearity
<2%
Light Source
Red Light
Wave Length
660 nm
Service Life (T = +25 °C)
100000 h
max. Ambient Light
10000 Lux
Light Spot Diameter
2 mm
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 40 mA
Cut-Off Frequency
100 Hz
Response Time
5 ms
Temperature Drift
35 µm/K
Temperature Range
-10...60 °C
PNP Error Output/Switching Current
200 mA
Analog Output
0...10 V
Output Current Analog Output
500 µA
Short Circuit Protection
yes
Analog Output
Reverse Polarity Protection
yes
Protection Class
III
Error Message
Mechanical Data
Red Light
Housing
Stainless Steel
Full Encapsulation
yes
Degree of Protection
IP67
Connection
Prewired
Cable Length
6,1 m
These sensors are equipped with an analog output and
can thus be utilized for measuring tasks. The output signal is practically independent of the object´s color. High
resolution and a wide variety of measuring ranges allow
for use in innumerable applications.
1 = Receiver Diode
2 = Transmitter Diode
All dimensions in mm (1 mm = 0.03937 Inch)
297
HD09MG-P24
Part Number
Prewired
Version
Analog Output
Connection Diagram No.
Control Panel No.
Suiting Mounting Technology No.
613
D13
150
160
Connection Diagrams page 952 / System Components page 828
Complimentary Products
Analog Evaluation Unit AW02
Dust extraction tube STAUBTUBUS-01
Error of Measurement
Typical characteristic curve based on Kodak white, 90 %
HD09MG-P24
Ctrl.Panel
dSr/mm
D13
0,4
0,2
0,0
-0,2
-0,4
79
12
-0,6
-0,8
30
40
50
60
70
80
90
Sr/mm
12 = Analog Output Indicator
79 = Run / Error Indicator
Sr = Switching Distance
black 6 %
dSr = Switching Distance Change
grey 18 %
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
Reflex Sensors
298
for Measuring Tasks
55...155 mm
Working Range
Technical Data
Optical Data
Working Range
55...155 mm
Measuring Distance
105 mm
Measuring Range
100 mm
Resolution
500 µm
Linearity
1%
Light Source
Red Light
Wave Length
660 nm
Service Life (T = +25 °C)
100000 h
max. Ambient Light
10000 Lux
Light Spot Diameter
3 mm
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 40 mA
Cut-Off Frequency
100 Hz
Response Time
5 ms
Temperature Drift
50 µm/K
Temperature Range
-10...60 °C
PNP Error Output/Switching Current
200 mA
Analog Output
0...10 V
Output Current Analog Output
500 µA
Short Circuit Protection
yes
Analog Output: 0...10 V DC
Reverse Polarity Protection
yes
Protection Class
III
Error Output
Mechanical Data
Large Measuring Range
Housing
Plastic
Full Encapsulation
yes
Red Light
Degree of Protection
IP67
Connection
Prewired
Cable Length
6m
These sensors are equipped with an analog output and
can thus be utilized for measuring tasks. The output signal is practically independent of the object´s color. High
resolution and a wide variety of measuring ranges allow
for use in innumerable applications.
1 = Transmitter Diode
2 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
299
HN24MGV-P24
Part Number
Prewired
Version
Error Output
Analog Output
Connection Diagram No.
603
Control Panel No.
N2
Suiting Mounting Technology No.
350
Connection Diagrams page 952 / System Components page 828
Complimentary Products
Analog Evaluation Unit AW02
Dust extraction tube STAUBTUBUS-03
Protection Housing Set ZSN-NN-02
Error of Measurement
Typical characteristic curve based on Kodak white, 90 %
HN24MGV-P24
Ctrl.Panel
03
12
dSr/mm
N2
1.0
0.5
0.0
-0.5
-1.0
-1.5
50
60
70
80
90 100 110 120 130 140 150
Sr/mm
03 = Error Indicator
12 = Analog Output Indicator
Sr = Switching Distance
black 6 %
dSr = Switching Distance Change
grey 18 %
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
Reflex Sensors
300
for Measuring Tasks
300...600 mm
Working Range
Technical Data
Optical Data
Working Range
300...600 mm
Measuring Distance
450 mm
Measuring Range
300 mm
Resolution
see Table 1
Linearity
1%
Switching Hysteresis
20 mm
Light Source
Red Light
Wave Length
660 nm
Service Life (T = +25 °C)
100000 h
max. Ambient Light
10000 Lux
Light Spot Diameter
see Table 1
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 50 mA
Cut-Off Frequency
50 Hz
Response Time
10 ms
Temperature Drift
100 µm/K
Temperature Range
-10...60 °C
Switching Output Voltage Drop
< 2,5 V
PNP Switching Output/Switching Current
200 mA
Error Output Voltage Drop
< 2,5 V
Digital, Analog and Error Outputs
PNP Error Output/Switching Current
200 mA
Analog Output
0...10 V
Go / No-Go testing possible
Output Current Analog Output
500 µA
Red Light
Short Circuit Protection
yes
Reverse Polarity Protection
yes
Triple Beam Correction Principle
Overload Protection
yes
Protection Class
III
Mechanical Data
Housing
Plastic
Degree of Protection
IP67
Connection
M12 × 1
These sensors are equipped with an analog output, as
well as a digital output. The upper and lower switching
points of the digital output can be adjusted with two potentiometers. The digital output is activated when an object is located within the window defined in this way.
1 = Receiver Diode
2 = Transmitter Diode
3 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
301
HT60MGV80
Part Number
Plug Version
Error Output
PNP NO
Analog Output
Connection Diagram No.
506
Control Panel No.
T5
Suiting Connection Technology No.
Suiting Mounting Technology No.
80
330
Connection Diagrams page 952 / System Components page 828
Table 1
Working Distance
Complimentary Products
Analog Evaluation Unit AW02
300 mm
450 mm
600 mm
Light Spot Diameter
10 mm
15 mm
20 mm
Resolution
0,3 mm
2 mm
5 mm
Error of Measurement
Typical characteristic curve based on Kodak white, 90 %
Ctrl.Panel
HT60MGV80
T5
01
33
13
14
dSr/mm
5
0
-5
-10
-15
-20
300
01 = Switching Status Indicator
13 = Upper Potentiometer
14 = Lower Potentiometer
33 = Analog Voltage Output-/ Error Warning
350
400
450
500
550
600
Sr/mm
Sr = Switching Distance
black 6 %
dSr = Switching Distance Change
grey 18 %
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
Reflex Sensors
302
for Measuring Tasks
350...850 mm
Working Range
Technical Data
Optical Data
Working Range
350...850 mm
Measuring Distance
600 mm
Measuring Range
500 mm
Resolution
see Table 1
Linearity
1%
Switching Hysteresis
20 mm
Light Source
Infrared Light
Wave Length
880 nm
Service Life (T = +25 °C)
100000 h
Risk Group (EN 62471)
1
max. Ambient Light
10000 Lux
Light Spot Diameter
see Table 1
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 50 mA
Cut-Off Frequency
100 Hz
Response Time
5 ms
Temperature Drift
200 µm/K
Temperature Range
-10...60 °C
Switching Output Voltage Drop
< 2,5 V
PNP Switching Output/Switching Current
200 mA
Digital, Analog and Error Outputs
Error Output Voltage Drop
< 2,5 V
PNP Error Output/Switching Current
200 mA
Go / No-Go testing possible
Analog Output
0...10 V
Infrared Light
Output Current Analog Output
500 µA
Short Circuit Protection
yes
Triple Beam Correction Principle
Reverse Polarity Protection
yes
Overload Protection
yes
Protection Class
III
Mechanical Data
Housing
Plastic
Degree of Protection
IP67
Connection
M12 × 1
These sensors are equipped with an analog output, as
well as a digital output. The upper and lower switching
points of the digital output can be adjusted with two potentiometers. The digital output is activated when an object is located within the window defined in this way.
1 = Receiver Diode
2 = Transmitter Diode
3 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
303
HT66MGV80
Part Number
Plug Version
Error Output
PNP NO
Analog Output
Connection Diagram No.
506
Control Panel No.
T5
Suiting Connection Technology No.
Suiting Mounting Technology No.
80
330
Connection Diagrams page 952 / System Components page 828
Table 1
Working Distance
Light Spot Diameter
Resolution
Complimentary Products
Analog Evaluation Unit AW02
350 mm
600 mm
850 mm
6 mm
10 mm
20 mm
0,3 mm
3 mm
8 mm
Error of Measurement
Typical characteristic curve based on Kodak white, 90 %
Ctrl.Panel
HT66MGV80
T5
01
33
13
14
dSr/mm
5
0
-5
-10
-15
-20
300
01 = Switching Status Indicator
13 = Upper Potentiometer
14 = Lower Potentiometer
33 = Analog Voltage Output-/ Error Warning
400
500
600
700
800
900
Sr/mm
Sr = Switching Distance
black 6 %
dSr = Switching Distance Change
grey 18 %
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
Reflex Sensors
304
for Measuring Tasks
300...1300 mm
Working Range
Technical Data
Optical Data
Working Range
300...1300 mm
Measuring Distance
800 mm
Measuring Range
1000 mm
Resolution
see Table 1
Linearity
2%
Switching Hysteresis
50 mm
Light Source
Infrared Light
Wave Length
880 nm
Service Life (T = +25 °C)
100000 h
Risk Group (EN 62471)
1
max. Ambient Light
10000 Lux
Light Spot Diameter
see Table 1
Electrical Data
Supply Voltage
18...30 V DC
Current Consumption (Ub = 24 V)
< 50 mA
Cut-Off Frequency
50 Hz
Response Time
10 ms
Temperature Drift
500 µm/K
Temperature Range
-10...60 °C
Switching Output Voltage Drop
< 2,5 V
PNP Switching Output/Switching Current
200 mA
Digital, Analog and Error Outputs
Error Output Voltage Drop
< 2,5 V
PNP Error Output/Switching Current
200 mA
Go / No-Go testing possible
Analog Output
0...10 V
Infrared Light
Output Current Analog Output
500 µA
Short Circuit Protection
yes
Triple Beam Correction Principle
Reverse Polarity Protection
yes
Overload Protection
yes
Protection Class
III
Mechanical Data
Housing
Plastic
Degree of Protection
IP67
Connection
M12 × 1
These sensors are equipped with an analog output, as
well as a digital output. The upper and lower switching
points of the digital output can be adjusted with two potentiometers. The digital output is activated when an object is located within the window defined in this way.
1 = Receiver Diode
2 = Transmitter Diode
3 = Receiver Diode
All dimensions in mm (1 mm = 0.03937 Inch)
305
HT77MGV80
Part Number
Plug Version
Error Output
PNP NO
Analog Output
Connection Diagram No.
506
Control Panel No.
T5
Suiting Connection Technology No.
Suiting Mounting Technology No.
80
330
Connection Diagrams page 952 / System Components page 828
Table 1
Working Distance
Light Spot Diameter
Resolution
Complimentary Products
Analog Evaluation Unit AW02
300 mm
800 mm
1300 mm
6 mm
18 mm
30 mm
0,2 mm
8 mm
30 mm
Error of Measurement
Typical characteristic curve based on Kodak white, 90 %
Ctrl.Panel
HT77MGV80
T5
01
33
13
dSr/mm
50
40
30
20
14
10
0
-10
300
01 = Switching Status Indicator
13 = Upper Potentiometer
14 = Lower Potentiometer
33 = Analog Voltage Output-/ Error Warning
400
500
600
700
800
900 1000 1100 1200 1300
Sr/mm
Sr = Switching Distance
black 6 %
dSr = Switching Distance Change
grey 18 %
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com